79 Trenton Avenue Frenchtown, NJ 08825
www.designplan.com
Tel: (908) 996-7710 Fax: (908) 996-7042
CHIARA
67
• Round luminaire for installation on wall or ground –
recessed.
• Configuration: die-cast aluminum structure, EN AB-47100
alloy (low copper content) and AISI 316L blasted stainless steel frame. Glass diffuser: Sandblasted with silkscreen border, fixed to the aluminum body through a robotic gluing system. • Double layer coating for high resistance to corrosion: the aluminum components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminum fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. • Protection rating: IP67 • Installation: the luminaire is equipped with a piece of cable for an easy-to-make connection. 24V version: the cable is integrated with an H2O STOP device. Outdoor use requires suitable flexible cables. Installation requires a dedicated box to be ordered separately. It is important to provide a >7.87" gravel layer or a drain system (for concrete surface) to ensure good drainage and to avoid water stagnation.
VERSION: lass A/A+/A++ uminaire supplied ith integrated LED modules at cannot be replaced
.0 Inox
Recessed ground fitting
Recessed wall fitting
Pre-wired with approx 9.84" of cable.
Protection against water ingress from the cable H2O STOP
Do not install in hollow areas
Installation requires a 0.79" water drainage layer (gravel)
Glass surface temperature <158°F
Protection against impact. IK 08 - 5.00 joule
Remote device required for 24V version
Chiara
Ib
Static load: 1102.31 lbs walk over
Designplan | Ares
Chiara Mid-Power LED / Stainless Steel Frame - Sandblasted Glass - 24Vdc
A A A U530009 NATURAL WHITE 4000K MID-POWER LEDs 3.5W/24Vdc Total power 4W lm LED 380 ≠ lm OUTPUT 200 CRI>80 +
++
240
120˚
Fc Med 0.09 0.09 0.19 0.28 1.30
cd / 1000 lm C0 / C180
C90 / C270
= 60.0˚+ 60.0˚
= 60.0˚+ 60.0˚
A A A U530010 WARM WHITE 3000K MID-POWER LEDs 3.5W/24Vdc Total power 4W lm LED 360 ≠ lm OUTPUT 190 CRI>80
0.08"
+
2.09"
Fc Max 0.19 0.19 0.56 1.21 5.02
90˚
Remote electronic power supply to be ordered
Ø 5.12"
ft 16.40 13.12 9.84 6.56 3.28
MID-POWER LED
++
Remote electronic power supply to be ordered
Chiara Mid-Power LED / Stainless Steel Frame - Sandblasted Glass - 24Vdc
A A A U530005 NATURAL WHITE 4000K MID-POWER LEDs 6.5W/24Vdc Total power 7.3W lm LED 734 ≠ lm OUTPUT 394 CRI>80 Remote electronic power supply to be ordered +
0.08"
2.09" Ø 5.12"
ft 16.40 13.12 9.84 6.56 3.28
400
120˚
Fc Fc Max Med 0.65 0.19 1.02 0.37 1.86 0.65 4.18 1.39 16.82 5.57
90˚ cd / 1000 lm C0 / C180
C90 / C270
= 48.0˚+ 48.0˚
= 46.0˚+ 46.0˚
A A A U530006 WARM WHITE 3000K MID-POWER LEDs 6.5W/24Vdc Total power 7.3W lm LED 707 ≠ lm OUTPUT 308 CRI>80 Remote electronic power supply to be ordered +
MID-POWER LED
++
++
Chiara
Designplan | Ares
Accessories: Chiara U50 BOX FOR INSTALLATION Ø 6.30" H 2.76"
2.76"
Ø 4.53"
Ø 6.30"
acc. code
U50
prod. code
U530002 U530003 U530005 U530006 U530007 U530008 U530009 U530010
Chiara
117