79 Trenton Avenue Frenchtown, NJ 08825
www.designplan.com
Tel: (908) 996-7710 Fax: (908) 996-7042
65
TALIA
• Bollard light. • Configuration: •
• •
•
aluminum extruded structure. Polycarbonate diffuser: opal UV-stabilised. Double layer coating for high resistance to corrosion: the aluminum components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminum fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting. Protection rating: IP65 Installation: The LED module is housed in a sealed transparent polycarbonate cylinder with compensation valve. The luminaire is equipped with a piece of cable and a wiring kit with crimp connectors and an adhesive heat-shrink tubing for a watertight electrical connection. We recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately). Outdoor use requires suitable flexible cables. We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
.1 White
VERSION: lass A/A+/A++ uminaire supplied ith integrated LED modules at cannot be replaced .6 Grey .3 Anthracite
Bollard light
Protection against impact. IK 08 - 5.00 joule
Talia
.4 Black
.18 Deep Brown
Pre-wired with approx 7.87" of cable
Talia Low-Power LED / H. 14.17in - Single Emission U503011 A A A NATURAL WHITE 4000K LOW-POWER LEDs 3W/120-277V Total power 4W lm LED 216 ≠ lm OUTPUT 73 CRI >80 +
450
++
Integral electronic power supply
fc
120˚
3.28
360 0.46 1.39
90˚
4.182.32
0
60˚ cd / 1000 lm C0 / C180
C90 / C270
-6.56
-3.28
0 ft
3.28
-3.28 6.56
U503006 A A A WARM WHITE 3000K LOW-POWER LEDs 3W/120-277V Total power 4W lm LED 216 ≠ lm OUTPUT 73 CRI >80 Integral electronic power supply +
14.17"
4.72" 1.38"
++
LOW POWER LED
7.09"
2.36"
Talia Low-Power LED / H. 14.17in - Double Emission U503012 A A A NATURAL WHITE 4000K LOW-POWER LEDs 2x(3W)/120-277V Total power 7W lm LED 2x216 ≠ lm OUTPUT 2x73 CRI >80 +
++
Integral electronic power supply
3.28
200 0.46
90˚
1.39 4.18 2.32
0
60˚ cd / 1000 lm C0 / C180
C90 / C270
-6.56
-3.28
0 ft
3.28
-3.28 6.56
U503008 A A A WARM WHITE 3000K LOW-POWER LEDs 2x(3W)/120-277V Total power 7W lm LED 2x216 ≠ lm OUTPUT 2x73 CRI >80 +
4.72"
fc
120˚
1.38"
++
14.17"
Integral electronic power supply
LOW POWER LED
7.09"
2.36"
Talia
Designplan | Ares
Talia Low-Power LED / H. 22.05 in - Single Emission U503009 A A A NATURAL WHITE 4000K LOW-POWER LEDs 5W/120-277V Total power 6W lm LED 360 ≠ lm OUTPUT 123 CRI >80 +
++
Integral electronic power supply
fc
3.28
360 1.39
90˚
0.46 0
2.32 3.25
60˚ cd / 1000 lm C0 / C180
C90 / C270
-6.56
-3.28
0 ft
-3.28 6.56
3.28
U503002 A A A WARM WHITE 3000K LOW-POWER LEDs 5W/120-277V Total power 6W lm LED 360 ≠ lm OUTPUT 123 CRI >80 +
4.72"
450
120˚
1.38"
++
22.05"
Integral electronic power supply
LOW POWER LED
7.09"
2.36"
Talia Low-Power LED / H. 22.05in - Double Emission U503010 A A A NATURAL WHITE 4000K LOW-POWER LEDs 2x(5W)/120-277V Total power 11W lm LED 2x360 ≠ lm OUTPUT 2x123 CRI >80 +
++
Integral electronic power supply
U503004 A A A WARM WHITE 3000K LOW-POWER LEDs 2x(5W)/120-277V Total power 11W lm LED 2x360 ≠ lm OUTPUT 2x123 CRI >80 Integral electronic power supply +
1.38"
7.09"
2.36"
22.05"
4.72"
LOW POWER LED
Designplan | Ares
Talia
++
450
fc
120˚
3.28
210 1.39
90˚
3.252.32
0.46 0
60˚ cd / 1000 lm C0 / C180
C90 / C270
-6.56
-3.28
0 ft
3.28
-3.28 6.56
Talia
Designplan | Ares
Accessories: Talia
2.36"
6.69"
U139 BASE PLATE AND FIXING BOLTS 7.09" x 2.36" x H 6.69"
7.09"
acc. code
U139
prod. code
U503002 U503004 U503006 U503008 U503009 U503010 U503011 U503012
Correct Fixing Method Bollard fixed on plint + suitable installation screws
Correct Fixing Method Bollard fixed on plinth + fixing bolts
Incorrect Fixing Method Do not fix the bollard directly on the ground
Correct Fixing Method
Correct Fixing Method
Incorrect Fixing Method
Bollard fixed on plinth + plug
Bollard fixed on plinth + fixing bolts
Do not fix the bollard directly on the ground
Designplan | Ares
Talia