1 minute read

Barricade Lights - High Intensity

Next Article
AC4DSL-NL

AC4DSL-NL

- Exceeds ITE standards and MUTCD visibility specifications.

- Independently tested by a Coast Guard approved laboratory

Advertisement

- High intensity (Type B) with LED light source operates on 2 or 4 D-cell batteries (not incl.), onboard solar charging cells, or a combination of both.

B4DH-SL

Solar

Ell

Equipped

High Intensity Solar D-Cell LED

Solar

- Maintenance free operational life is about 5 years in optimal conditions with the combination of quality D-Cell batteries, solar cells, and our "Smart Circuit" technology

- Three modes: Flashing/Dim (extends battery life), Flashing/No Dim, or Off.

- Charge time: 2 days.

- Run time for solar cells (non-dim mode): 3 days. (dim mode): 5 days.

- Mono-directional lens with attached visor to eliminate sun glare.

- Features optically correct UV stabilized polycarbonate lens, high impact visor and case, and stainless steel contacts.

- May be self-certified for compliance with NCHRP-350 crash test standards.

- Standard package: 10 lights, 10 bolts, 10 switch pins, and 1 socket.

- Bolt protectors available at extra cost.

/TypeBBarricadeLight

D-Cell

B4DH High Intensity D-Cell LED

- Exceeds I.T.E. and MUTCD standards.

- Tested in an approved independent laborotory to I.T.E.Type B requirements.

- ED uses 2 or 4 D-cell batteries (not included).

- Mono-directional lens with visor to eliminate sun glare.

- Three modes: Flashing/Dim, Flashing/No Dim, Off.

- Light dims 50% at night to extend battery life.

- Lenses molded from UV stabilized polycarbonate.

- Case is high impact polypropylene.

- B4DH standard package: 10 lights, 10 bolts, 10 switch keys, and 1 socket. Pkg. weight: 18 lbs.

- LED light source powered by heavy duty 6 volt battery

- Exceeds ITE standards and MUTCD visibility specifications.

- Tested by a Coast Guard approved laboratory

- Equipped with a photo cell to automatically turn on at dusk and off at dawn.

- Case is high impact polypropylene, battery contacts are made of corrosion resistant stainless steel.

- TLL6S - Flashing (TypeA).

- TLL8S -Three selectable modes: Flash (TypeA), SteadyBurn (Type C), or Off.

- Will operate on one or two 6 volt batteries (not included).

- Battery life: 90 - 120 days (w/2 new batteries).

- Hardware: 10 lights, 10 bolts, 10 switch pins, and 1 socket.

- Weight per carton: 17 lbs. Flashing (TypeA) Flashing (TypeA), Steady Burn (Type C), & Off

This article is from: