How To Diagnose & Fix Your
Dodge Cummins Starting Problems in Jeffersonville?
Issues in the vehicle are a big concern for all owners especially when it doesn't start.
If your Dodge Cummins doesn’t start, then it is usually caused due to the: Dead battery Loose or corroded connection cables Bad alternator Issues with the starter
When the vehicle won’t start, it leaves you stranded with a dead engine.
Moreover, it’s very hard to determine the real causes behind starting problems.
Through the below ways you can diagnose the starting issues in Dodge Cummins.
Check the fuel pressure
In general, the vehicle might not start for low fuel pressure that is arising due to: Bad fuel pump Damaged fuel pressure regulator Clogged fuel filter
You can check the fuel pressure with a fuel pressure gauge or in the OBD2 scanner.
Engine cranking
When you turn the ignition, you can typically hear the engine cranking sound.
If the vehicle is not cranking when you are turning the ignition switch, you may have a starter problem.
Check out the spark
Spark is another common problem when the Dodge Cummins won’t start.
Moreover, these problems are commonly arising due to bad spark plugs and ignition coils.
Check the compression test
If your vehicle has a wellfunctional ignition, but it won't start, then check out the compression.
Do a compression test with a compression tester to verify that you have the same pressure on all cylinders.
Check the crankshaft/camshaft sensors
When the vehicle doesn’t start, check the RPM signal from the crankshaft and the camshaft sensor.
Check the value of the crankshaft RPM from the engine control unit with an OBD2 scanner.
Once you diagnose the starting problems in your Dodge Cummins, try to fix them ASAP.
At this point, you have to consult a reputed mechanic to fix it efficiently.
Get In Touch With Us For inquiries or follow-ups
Company Address
Phone Number
Website
2207 DUTCH LN,
812-362-2779
https://dieselpickuppros.com/
JEFFERSONVILLE, IN 47130