Turpin ymw brochure final by Peter Ellis

2015 PRODUCT CATALOG

TURPIN WHOLESALE ■ 413.733.6700 ■ TURPINWHOLESALE.COM

TABLE OF CONTENTS I SERIES PO (ISP) . . . . . . . . . . . . . . . . . . . . . . . . 6

Spiral Pointed Taps for Unified Threads . . . . . . . . . . . 6

Spiral Fluted Taps for Unified Threads . . . . . . . . . . . .7

STANDARD SERIES PO AND SP . . . . . . . . . . . . . . . . 8

Spiral Pointed Taps for Unified Threads (PO) . . . . . . . . 8

Plug Style . . . . . . . . . . . . . . . . . . . . . . . . 8

Bottoming Style . . . . . . . . . . . . . . . . . . . . 10

Spiral Fluted Taps for Unified Threads (SP) . . . . . . . . . 11

STANDARD SERIES STI . . . . . . . . . . . . . . . . . . . . 14

Spiral Pointed Taps for Unified Threads (STI-PO) . . . . . 14

Spiral Fluted Taps for Unified Threads (STI-SP) . . . . . . 16

STANDARD SERIES STI-HT HAND TAPS . . . . . . . . . . . 18

Plug Style Taps for Unified Threads . . . . . . . . . . . . 18

Bottoming Style Taps for Unified Threads . . . . . . . . 20

STANDARD SERIES HT HAND TAPS . . . . . . . . . . . . . 22

Plug Style Taps for Unified Threads . . . . . . . . . . . . 22

Bottoming Style Taps for Unified Threads . . . . . . . . .25

ZELX SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Spiral Pointed Taps for Unified Threads . . . . . . . . . . 28

6â&#x20AC;? Extended Spiral Pointed Taps Unified Threads . . . . 30

Spiral Pointed Taps for Metric Threads . . . . . . . . . . . 31

Spiral Fluted Taps for Unified Threads . . . . . . . . . . .32

Modified Bottoming Style . . . . . . . . . . . . . . . 32

Bottoming Style . . . . . . . . . . . . . . . . . . . . 34

2015 YAMAWA PRODUCT CATALOG

TABLE OF CONTENTS ZELX SS (CONTINUED) . . . . . . . . . . . . . . . . . . . . . 28 Spiral Fluted Taps for Metric Threads . . . . . . . . . . . 35

Modified Bottoming Style . . . . . . . . . . . . . . . 35

Bottoming Style . . . . . . . . . . . . . . . . . . . .36

6â&#x20AC;? Extended Spiral Fluted Taps for Unified Threads . . . . 37

ZELX SS PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ZELX MOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ZELX CARBIDE HAND TAPS . . . . . . . . . . . . . . . . . . 40

For Unified Threads . . . . . . . . . . . . . . . . . . . . . 40

For Metric Threads . . . . . . . . . . . . . . . . . . . . . . 41

ZELX NI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Spiral Pointed Taps for Unified Threads . . . . . . . . . . 42

Spiral Pointed Taps for Metric Threads . . . . . . . . . . .43

Spiral Fluted Taps for Unified Threads . . . . . . . . . . . 44

Bottoming Style . . . . . . . . . . . . . . . . . . . . 44

Modified Bottoming Style . . . . . . . . . . . . . . . 45

Spiral Fluted Taps for Metric Threads . . . . . . . . . . . 46

ZELX NI STI . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Spiral Pointed Taps for Unified Threads . . . . . . . . . . 47

Spiral Fluted Taps for Unified Threads . . . . . . . . . . .48

Modified Bottoming Style . . . . . . . . . . . . . . . 48

Bottoming Style . . . . . . . . . . . . . . . . . . . . 49

2015 YAMAWA PRODUCT CATALOG

TABLE OF CONTENTS ZELX TI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Left Hand Spiral Fluted Taps for Unified Threads . . . . 50

Left Hand Spiral Fluted Taps for Metric Threads . . . . . . 51

Spiral Fluted Taps for Unified Threads . . . . . . . . . . .52

Bottoming Style . . . . . . . . . . . . . . . . . . . . 52

Modified Bottoming Style . . . . . . . . . . . . . . . 53

Spiral Fluted Taps for Metric Threads . . . . . . . . . . . 54

ZELX AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Spiral Pointed Taps for Unified Threads . . . . . . . . . . 55

Plug Style . . . . . . . . . . . . . . . . . . . . . . . 55

Modified Bottoming Style . . . . . . . . . . . . . . .56

Spiral Pointed Taps for Metric Threads . . . . . . . . . . . . . . 57

Plug Style . . . . . . . . . . . . . . . . . . . . . . . 57

Modified Bottoming Style . . . . . . . . . . . . . . .58

ZELX ALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Spiral Fluted Taps for Unified Threads . . . . . . . . . . 59

Spiral Fluted Taps for Metric Threads . . . . . . . . . . . 60

+.005â&#x20AC;? H11 OVERSIZE SPIRAL FLUTE TAPS . . . . . . . . . 61 N-RZ ROLL TAPS . . . . . . . . . . . . . . . . . . . . . . . . 62

Plug Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Bottoming Style . . . . . . . . . . . . . . . . . . . . . . . . . . 63

2015 YAMAWA PRODUCT CATALOG

TABLE OF CONTENTS N-RS ROLL TAPS . . . . . . . . . . . . . . . . . . . . . . . . 64

Thread Forming Taps for Unified Threads . . . . . . . . . 64

Bottoming Style . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Plug Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Thread Forming Taps for Metric Threads . . . . . . . . . 66

ZELX HP-RZ ROLL TAPS . . . . . . . . . . . . . . . . . . . . 67

High Performance Thread Forming Taps for Unified Threads . . 67

High Performance Thread Forming Taps for Metric Threads . 68

NPT TAPER PIPE TAPS . . . . . . . . . . . . . . . . . . . . . 69 NPT INTERRUPTED TAPER PIPE TAPS . . . . . . . . . . . . 70 NPT/NPTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 ZELX MOLD NPT . . . . . . . . . . . . . . . . . . . . . . . . . 72 NPTF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 NPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 NPSF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

2015 YAMAWA PRODUCT CATALOG

NEW I SERIES PO TAPS (ISP) I Series Spiral Pointed Taps For Unified threads Designed for small batch quantity jobs that require the most economical tap. These taps are designed to tap steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Taps have oxide surface treatment Plug Style (3 to 5 threads chamfered)

Nominal Size

Threads per Inch NC NF

UNC 32

UNF —

I SERIES PO Machine Screw Sizes Fractional Sizes No. of Flutes

EDP Numbers 2B CLASS OF FIT

Dimensions Length of Thread Length Overall

VAUN6JXH

.374

—

VAUN8JXHEX

.374

2 2-1/8

—

VAUNAMXHEX

.512

2-3/8

1/4

—

VAU04NXHEX

.591

2-1/2

5/16

—

VAU05OXHEX

.669

2-23/32

3/8

—

VAU06PXHEX

.748

2-15/16

2015 YAMAWA PRODUCT CATALOG

NEW I SERIES SP TAPS I Series Spiral Fluted Taps For Unified threads Ideal for steels, irons, brass and plastics in blind hole applications. These taps are designed to tap steels and ferrous materials that produce stringy chips. Spiral Fluted taps are recommended for tapping blind hole where chips are pulled out of the hole toward the tap shank instead of pushing them to the bottom of the hole. Taps have oxide surface treatment Bottoming Style (2.5 threads chamfered)

Nominal Size

Threads per Inch

I SERIES SP Machine Screw Sizes Fractional Sizes No. of Flutes

No. of Flutes

EDP Numbers

Dimensions

NC UNC

NF UNF

—

.374

UAUN6JXHEX

—

UAUN8JXHEX

.374

2-1/8

—

UAUNAMXHEX

.512

2-3/8

1/4

—

UAU04NXHEX

.591

2-1/2

5/16

—

UAU05OXHEX

.669

2-23/32

3/8

—

UAU06PXHEX

.748

2-15/16

2B CLASS OF FIT

Length of Thread

Length Overall

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES PO Spiral Pointed Taps for Unified Threads

NEW BRIGHT FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Series Taps have a Bright surface treatment Plug Style (3 to 5 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI Nominal NC NF Size UNC UNF

STANDARD SERIES PO Machine Screw Sizes Fractional Sizes Pitch Diameter Limit / EDP Numbers

PSUN0B1NEB

PSUN0B2NEB

— —

2 2

PSUN1D1NEB

PSUN1D2NEB

1 2

— 56

72 —

PSUN1C1NEB

PSUN1C2NEB

PSUN2E1NEB

PSUN2E2NEB

PSUN2D1NEB

PSUN2D2NEB

—

PSUN3F1NEB

PSUN3F2NEB

— 48 —

PSUN3E1NEB

56 —

4 4

—

PSUN4F1NEB

PSUN3E2NEB PSUN4H2NEB PSUN4F2NEB

5 5

40 —

2 2

PSUN5H2NEB

PSUN5H3NEB

PSUN5G2NEB

PSUN5G3NEB

44 —

PSUN6J2NEB

PSUN6J3NEB

—

PSUN6H2NEB

PSUN6H3NEB

32 —

8 10

No. of Flutes

—

PSUN4H3NEB

—

PSUN8J2NEB

PSUN8J3NEB

2 3

PSUN8I2NEB PSUNAM2NEB

PSUN8I3NEB PSUNAM3NEB

Dimensions Length of Thread Length Length of Thread Overall .236

1.772

.275

1.772

.275 .314

1.772 1.772

.314 .354

1.772 2.205

.354

2.205

.354 .354

2.205 2.205

.433

2.205

.433

2.205

.433 .433

2.205 2.205

.512 .512 .551

2.480 2.480 2.756

36 —

—

PSUNAJ2NEB

PSUNAJ3NEB

.551

2.756

12 12

24 —

— 28

3 3

PSUNCM2NEB PSUNCK2NEB

PSUNCM3NEB

.591

3.150

.591

3.150

1/4

—

PSU04K2NEB

.591

3.150

5/16

—

5/16

—

3.543 3.543

16 —

3 3 3

.748 .748

3/8 3/8

24 — 24

PSU06P5NEB

.906 .906

3.937 3.937

7/16

—

PSU07Q5NEB

.906

3.937

7/16

—

.906

3.937

1/2 1/2

13 —

20 —

1.024

4.331

1.024

4.331

9/16 9/16

12 —

1.024 1.024

4.331 4.331

20 — 18

3 3 3 3

2015 YAMAWA PRODUCT CATALOG

PSUNCK3NEB

PSU04K3NEB PSU05O3NEB PSU05M3NEB PSU06P3NEB PSU06M3NEB

PSU05M4NEB PSU06M4NEB PSU07Q4NEB

PSU07N3NEB PSU08N3NEB

PSU07N4NEB PSU08R4NEB PSU08N4NEB PSU09S4NEB PSU09O4NEB

PSU08R5NEB PSU09S5NE PSU09O5NEB

STANDARD SERIES PO Spiral Pointed Taps for Unified Threads

NEW BRIGHT FINISH

TPI Nominal NC NF Size UNC UNF

No. of Flutes

5/8

—

5/8

—

3/4 3/4

10 —

— 16

7/8

9 —

— 14

7/8

STANDARD SERIES PO Fractional Sizes Pitch Diameter Limit / EDP Numbers

Dimensions

PSU10U4NEB PSU10O4NEB

PSU10O5NEB PSU12V5NEB

PSU12P4NEB

PSU14Q4NEB

PSU10U6NEB PSU12V6NEB

PSU12P5NEB PSU14W5NEB

PSU14W6NEB PSU14Q6NEB

Length of Thread 1.024 1.024

Length Overall 4.331 4.331

1.299 1.299

4.921 4.921

1.299

5.512

1.299

5.512

1.457 1.457

6.299 6.299

1.732 1.732

7.087 7.087

1.929 1.929

7.087

2.165 2.165

7.874 7.874

Pitch Diameter Limit / EDP Numbers H5 1 1

8 —

— 12

3 3

1 1/8

—

1 1/8

—

4 4

1 1/4

7 —

—

1 1/4 1 3/8 1 3/8

6 —

— 12 —

1 1/2

—

4 4 4 4 4 4

PSU16S5NEB

PSU16S6NEB PSU18Y6NEB

PSU18S5NEB

PSU18S6NEB

PSU20S5NEB PSU22S5NEB

PSU18Y7NEB PSU20Y8NEB

PSU20Y6NEB PSU20S6NEB

PSU22Z8NEB

PSU22Z6NEB PSU22S6NEB PSU24Z6NEB

PSU24S5NEB

H7 PSU16X7NEB

PSU16X5NEB

PSU24Z8NEB PSU24S7NEB

2.323 2.323

7.087

7.874 7.874

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES PO Spiral Pointed Taps for Unified Threads

NEW OXIDE FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Series Taps have a Bright surface treatment Bottoming (2.5 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI Nominal NC NF Size UNC UNF

No. of Flutes

STANDARD SERIES PO Machine Screw Sizes Fractional Sizes

Pitch Diameter Limit / EDP Numbers H1

PSUN2E2NEX

Length of Thread

Length Overall

—

PSUN4H3NEX

.354

2.205

—

PSUN5H3NEX

.433

2.205

6 6

32 —

— 40

2 2

PSUN6J3NEX PSUN6H3NEX

.433 .433

2.205 2.205

—

PSUN8J3NEX

.512

2.480

24 —

—

PSUNAM3NEX PSUNAJ3NEX

.551

2.756 2.756

—

PSUNCM3NEX

.551 .591

3.150

1/4

—

.591

3.150

1/4

—

.591

3.150

5/16

—

PSU05O4NEX

5/16

—

.748 .748

3.543 3.543

2 3

PSU05M4NEX

3/8

24 —

.906 .906

3.937 3.937

.314

Dimensions

PSU04N4NEX PSU04K3NEX

3/8

—

PSU06M4NEX

7/16

—

7/16

—

1/2 1/2

13 —

20 —

5/8 5/8

11 —

3/4

3 3

—

18 —

3 3

PSU06P5NEX

PSU07Q5NEX

PSU07N4NEX PSU08R5NEX

PSU08N4NEX PSU10U6NEX PSU10O5NEX

PSU12V6NEX

1.772

.906

3.937

.906

3.937

1.024 1.024

4.331 4.331

1.024 1.024 1.299

4.331 4.331 4.921

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES SP Spiral Fluted Taps for Unified Threads

NEW BRIGHT FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics in blind hole applications. Spiral Fluted Bottoming taps are recommended for tapping blind holes where the chips are pulled out of the hole towards the tap shank instead of pushing them to the bottom of the hole. Standard Series Taps have a Bright surface treatment

Bottoming (2.5 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI Nominal NC NF Size UNC UNF

Pitch Diameter Limit / EDP Numbers

No. of Flutes

—

SSU04N3NEB

SU05M3NEB

—

3/8

—

7/16

—

7/16

—

9/16

—

SSU09S3NEB

9/16

—

SSU09O3NEB

5/16 3/8

—

STANDARD SERIES SP Machine Screw Sizes Fractional Sizes

SSUNAM3NEB

SSUNCM2NEB

SSUNCM3NEB

SSUNCK2NEB

SSUNCK3NEB

SSU06P3NEB SSU06M2NEB SSU07N2NEB SSU08N2NEB

SSU06P4NEB SSU07Q4NEB

SSU07N3NEB SSU08R3NEB

.551

SSU06M3NEB SSU07Q3NEB

Length of Thread

SSU08R4NEB

SSU08N3NEB SSU09S4NEB

Dimensions

Length Overall 2.756

.591

3.150

.591

3.150

.748

3.543

.906

3.937

.906

3.937

.906

3.937

.906

3.937

1.024

4.331

1.024

4.331

1.024

4.331

1.024

4.331

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES SP Spiral Fluted Taps for Unified Threads

NEW BRIGHT FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics in blind hole applications. Spiral Fluted Bottoming taps are recommended for tapping blind holes where the chips are pulled out of the hole towards the tap shank instead of pushing them to the bottom of the hole. Standard Series Taps have a Bright surface treatment.

Bottoming (2.5 threads chamfered) DIN lengths with ANSI shank dimensions.

Nominal Size

TPI NC UNC

5/8

NF UNF —

5/8

—

3/4

—

No. of Flutes

STANDARD SERIES SP Fractional Sizes

Pitch Diameter Limit / EDP Numbers H4 H5

Dimensions Length of Length Thread Overall

SSU10U3NEB

SSU10U4NEB

—

1.024

4.331

SSU10O3NEB

SSU10O4NEB

—

1.024

SSU12P3NEB

4.331

—

1.299

4.921

2015 YAMAWA PRODUCT CATALOG

SSU12P4NEB

HSS

NEW OXIDE FINISH

2 .5

The Standard Series taps are designed for general p u r p o s e u s a g e i n s m a ll a n d l a r g e b a t c h q u a n t it y j o b s that require the most economical tool life. F o r U n ifie d T h re a d s T h e s e t a p s a r e d e s i g n e d t o t h r e a d s t e e ls a n d NEW OXIDE FINISH e r r o u s Fluted m a t e r iTaps a l s t hfor a t Unified Threads fSpiral p r o d u c e s t r in g y c h i p s . T h e y a r e a l s o i d e a l f o r b r a s s , pThe l a sStandard t i c s inSeries blind h oare l e designed a p p l i c afor t igeneral o n s . purpose usage in small and large batch quantity jobs that require the most economical tool taps Slife. p i rThese a l Ftaps lu t eare d B o t t o m in g t a p s a r e ferrous materials that produce stringy chips. They are also ideal for brass, plastics in blind hole f o r t a pto p thread i n g b steels l i n d and holes where r e c o m m e n d e d designed h e c h i p s aSpiral r e pFluted u l l e dBottoming o u t o f ttaps h e are h o recommended l e t o w a r d s for tapping blind holes where the chips are pulled out of the hole towards the tap tapplications. t h e t a p s h a n k in s t e a d o f p u s h i n g t h e m t o t h e o t t oinstead m o f tof h pushing e h o l e .them to the bottom of the hole. Standard Series Taps have a Steam Oxide surface treatment. bshank

STANDARD SERIES SP

Standard Series Spiral Fluted T a

Standard Series Taps have a Steam Oxide surface treatment

Bottoming (2.5 threads chamfered) BO T T Owith MIN G (shank 2 .5 t hdimensions. reads DIN lengths ANSI

c h a m fe r e d ) D I N le n g th s w ith A N S I s h a n k d im e n s io n s .

TPI Nominal NC NF Size UNC UNF

STANDARD SERIES SP Machine Screw Sizes Fractional Sizes

M a c h in e S c r e w si STANDARD SERIES SP F r a c tio n a l siz e s

Pitch Diameter Limit / EDP Numbers

No. of Flutes

Length of Thread

Dimensions Length Overall

—

SSUNAM3NE

2.756

—

.551

SSUNCM3NE

.591

3.150

1/4

—

SSU04N3NEX

.591

3.150

1/4

—

SSU04K3NEX

.591

3.150

3/8 3/8

16 —

— 24

3 3

.906

3.937

7/16

—

.906 .906

3.937 3.937

7/16

—

3.937

13 —

—

.906

1/2 1/2

3 3

1.024 1.024

4.331 4.331

5/8

1.024

4.331

3/4

1.299

4.921

SSU06P4NEX SSU06M3NEX SSU07Q4NEX SSU07N3NEX

SSU08R4NEX

SSU08N3NEX SSU10U4NEX SSU12V5NEX

2014-8

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES STI-PO Spiral Pointed Taps for Unified Threads

NEW BRIGHT FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Series Taps have a Bright surface finish. Plug Style (5 threads chamfered) DIN lengths with ANSI shank dimensions.

No. of Flutes

—

PUUN2E1NEB

PUUN2E2NEB

—

PUUN4H1NEB

PUUN4H2NEB

—

PUUN6J1NEB

PUUN6J2NEB

—

PUUN8J1NEB

PUUN8J2NEB

24 —

—

PUUNAM2NEB PUUNAJ2NEB PUU04N2NEB

STANDARD SERIES STI-PO SPIRAL POINTED

Pitch Diameter Limit / EDP Numbers

TPI

Nominal NC NF Size UNC UNF 2

PUUNAM3NEB PUUNAJ3NEB

1/4

—

1/4

—

PUU04K2NEB

PUU04K3NEB

5/16

—

5/16

—

2 2

PUU05O2NEB PUU05M2NEB

PUU05O3NEB PUU05M3NEB

3/8

16 —

3/8

24 — 24

PUU06P3NEB

3 3

PUU06M2NEB

PUU06M3NEB

PUU06P4NEB

Dimensions Length of Length Thread Overall .354

2.205

.512

2.480

.551

2.756

.591

3.150

.591

3.150

.591

3.150

.748

3.543

.748

3.543

.906

3.937

.906

3.937

1.024 .906

4.331 3.937

7/16

—

PUU07Q3NEB

PUU07Q4NEB

4.331

— 13

1.024

7/16

PUU07N3NEB PUU08R3NEB

PUU07N4NEB PUU08R4NEB

—

3 3

PUU08N3NEB

PUU08N4NEB

1.024 1.024 1.024

4.331 4.331 4.331

1/2 1/2

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES STI-PO Spiral Pointed Taps for Unified Threads

NEW OXIDE FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for bras, plastics, and in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Spiral Taps have a Steam Oxide surface finish. Plug Style (5 threads chamfered) DIN lengths with ANSI shank dimensions.

Nominal Size

TPI

Number of flutes

NC UNC

NF UNF

—

STANDARD SERIES STI-PO

Pitch Diameter Limit/EDP Numbers

Length of Thread

Length Overall

PUUN2E2NEX

.354

2.205

PUUN4H2NEX

.512

2.480

—

PUUN6J2NEX

.551

2.756

—

PUUN8J2NEX

.591

3.150

—

PUUNAM3NEX

.591

3.150

—

PUUNAJ3NEX

.591

3.150

1/4

—

PUU04N3NEX

.748

3.543

1/4

—

PUU04K3NEX

.748

3.543

5/16

—

PUU05O3NEX

.906

3.937

5/16

—

PUU05O3NEX

.906

3.937

3/8

—

1.024

4.331

3/8

—

.906

3.937

7/16

—

PUU07Q4NEX

1.024

4.331

7/16

—

PUU07N4NEX

1.024

4.331

1/2

—

PUU08R4NEX

1.024

4.331

2015 YAMAWA PRODUCT CATALOG

Dimensions H4

PUU06P4NEX PUU06M3NEX

STANDARD SERIES STI-SP Spiral Fluted Taps for Unified Threads

NEW BRIGHT FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Series Taps have a Bright surface finish. Bottoming (2 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI

Nominal NC NF Size UNC UNF

No. of Flutes

STANDARD SERIES STI-SP SPIRAL POINTED

Pitch Diameter Limit / EDP Numbers H2

Dimensions Length of Length Thread Overall

—

SUUN2E1NEB

SUUN2E2NEB

.354

2.205

—

SUUN4H1NEB

SUUN4H2NEB

.512

—

SUUN6J1NEB

SUUN6J2NEB

.551

2.480 2.756

—

SUUN8J1NEB

SUUN8J2NEB

.591

3.150

24 —

—

SUUNAM2NEB

SUUNAM3NEB

.591

3.150

SUUNAJ2NEB

SUUNAJ3NEB

.591

3.150

20 —

—

SUU04N2NEB

SUU04N3NEB SUU04K3NEB

3.543

SUU04K2NEB

.748

3.543

SUU05O2NEB

.906

3.937

.906

3.937

10 1/4 1/4 5/16

—

5/16

—

SUU05M2NEB

SUU05O3NEB SUU05M3NEB

3/8

—

SUU06P2NEB

SUU06P3NEB

3/8

—

SUU06M2NEB

SUU06M3NEB

1.024

4.331

.906

3.937

1.024

4.331

7/16

—

SUU07Q2NEB

SUU07Q3NEB

7/16

—

SUU07N2NEB

SUU07N3NEB

—

SUU08R2NEB

SUU08R3NEB

1.024 1.024

4.331 4.331

SUU08N2NEB

SUU08N3NEB

1.024

4.331

1/2 1/2

13 —

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES STI-SP Spiral Fluted Taps for Unified Threads

NEW OXIDE FINISH

The Standard Series taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for bras, plastics, and in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Spiral Taps have a Steam Oxide surface finish. Bottoming (2 threads chamfered) DIN lengths with ANSI shank dimensions.

Nominal Size

TPI

Number of flutes

NC UNC

NF UNF

—

STANDARD SERIES STI-SP SPIRAL FLUTED TAPS

Pitch Diameter Limit/EDP Numbers

Length of Thread

Length Overall

SUUN2E2NEX

.354

2.205

SUUN4H2NEX

.512

2.480

—

SUUN6J2NEX

.551

2.756

—

SUUN8J2NEX

.591

3.150

—

SUUNAM3NEX

.591

3.150

—

SUUNAJ3NEX

.591

3.150

1/4

—

SUU04N3NEX

.748

3.543

1/4

—

SUU04K3NEX

.748

3.543

5/16

—

SUU05O3NEX

.906

3.937

5/16

—

SUU05M3NEX

.906

3.937

3/8

—

SUU06P3NEX

1.024

4.331

3/8

—

SUU06M3NEX

.906

3.937

7/16

—

SUU07Q3NEX

1.024

4.331

7/16

—

SSU07N3NEX

1.024

4.331

1/2

—

SUU08N3NEX

1.024

4.331

2015 YAMAWA PRODUCT CATALOG

Dimensions H4

STANDARD SERIES STI-HT Hand Taps For Unified Threads

NEW BRIGHT FINISH

The STI HAND taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics. STI HT taps are recommended for tapping through holes or blind bottoming holes where the hole depth is great enough to allow for chip accumulation at bottom of the hole. Plug Style (4 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI

Nominal NC NF Size UNC UNF 2 4

No. of Flutes

STANDARD SERIES STI-HT

Pitch Diameter Limit / EDP Numbers H1

Dimensions Length of Length Thread Overall

—

TUUN2E2NEB4

.354

2.205

—

TUUN4H2NEB4

.512

2.48

—

TUUN6J2NEB4

—

.551

2.756

TUUN8J2NEB4

.591

3.15

24 —

—

3 3

TUUNAJ3NEB4

.591

3.15

.591

3.15

1/4

—

TUU04N3NEB4

.748

3.543

1/4

—

TUU04K3NEB4

.748

3.543

5/16

—

TUU05O3NEB4

5/16 3/8

—

.906

3.937

4 4

3/8

16 —

— 24

7/16

—

7/16

1/2

— 13

1/2

—

TUUNAM3NEB4

TUU05M3NEB4

TUU06P4NEB4

.906

3.937

1.024 .906

4.331 3.937

TUU07Q4NEB4

1.024

4.331

TUU07N4NEB4 TUU08R4NEB4

1.024 1.024

TUU08N4NEB4

1.024

4.331 4.331 4.331

2015 YAMAWA PRODUCT CATALOG

TUU06M3NEB4

STANDARD SERIES STI-HT Hand Taps for Unified Threads

NEW OXIDE FINISH

The STI HAND taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for bras, plastics, and in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Spiral Taps have a Steam Oxide surface finish. Plug Style (4 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI

Nominal NC NF Size UNC UNF

No. of Flutes

STANDARD SERIES STI-HT

Pitch Diameter Limit / EDP Numbers H1

Dimensions Length of Length Thread Overall

TUUN2E2NEX5

.354

2.205

—

TUUN4H2NEX5

.512

2.48

—

TUUN6J2NEX5

.551

2.756

—

TUUN8J2NEX5

.591

3.15

—

.591

3.15

3 3

TUUNAM3NEX5

24 —

TUUNAJ3NEX5

.591

3.15

1/4

—

TUU04N3NEX5

.748

3.543

1/4

—

TUU04K3NEX5

.748

3.543

5/16

—

TUU05O3NEX5

.906

—

3.937

5/16

TUU05O3NEX5

.906

3.937

3/8

—

1.024

4.331

.906

3.937

1.024

4.331

1.024 1.024

4.331 4.331 4.331

—

TUU06P4NEX5

3/8

—

7/16

—

TUU07Q4NEX5

7/16

1/2

— 13

TUU07N4NEX5 TUU08R4NE5

1/2

—

4 4

2015 YAMAWA PRODUCT CATALOG

TUU06M3NEX5

TUU08NNEX5

1.024

STANDARD SERIES STI-HT Hand Taps For Unified Threads

NEW BRIGHT FINISH

The STI-HT taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for brass, plastics. STI HT taps are recommended for tapping through holes or blind bottoming holes where the hole depth is great enough to allow for chip accumulation at bottom of the hole. Bottoming (1.5 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI

Nominal NC NF Size UNC UNF 2

—

No. of

STANDARD SERIES STI-HT

Pitch Diameter Limit / EDP Numbers

Flutes

TUUN2E1NEBA

TUUN2E2NEBA

.354

2.205

TUUN4H1NEBA

TUUN4H2NEBA

.512

2.48

TUUN6J1NEBA

TUUN6J2NEBA

.551

2.756

TUUN8J1NEBA

TUUN8J2NEA

.591

3.15

.591

3.15

—

1/4

20 —

— 28

5/16

—

5/16

—

3/8

16 —

— 24

7/16

—

TUU07Q3NEBA

TUU07Q4NEBA

7/16

—

TUU07N3NEBA

TUU07N4NEBA

1/2

13 —

—

4 4

TUU08R3NEBA TUU08N3NEBA

TUU08R4NEBA TUU08N4NEBA

1/4

3/8

1/2

Dimensions Length of Length Thread Overall

3 3

TUUNAM2NEBA TUUNAJ2NEBA

TUUNAM3NEBA TUUNAJ3NEBA

.591

3.15

TUU04N2NEBA

TUU04N3NEBA

.748

3.543

TUU04K2NEBA

TUU04K3NEBA

.748

3.543

4 4

TUU05O2NEBA TUU05M2NEBA

TUU05O3NEBA TUU05M3NEBA

4 4

3.937 3.937

TUU06M2NEBA

TUU06P3NEBA TUU06M3NEBA

.906 .906 1.024 .906

4.331 3.937

1.024

4.331

1.024 1.024 1.024

4.331 4.331 4.331

TUU06P4NEBA

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES STI-HT Hand Taps for Unified Threads

NEW OXIDE FINISH

The STI HAND taps are designed for general purpose usage in small and large batch quantity jobs that require the most economical tool life. These taps are designed to thread steels and ferrous materials that produce stringy chips. They are also ideal for bras, plastics, and in through hole applications. Spiral Pointed taps are recommended for tapping through holes. Standard Spiral Taps have a Steam Oxide surface finish. Bottoming (1.5 threads chamfered) DIN lengths with ANSI shank dimensions. TPI Nominal NC NF Size UNC UNF

No. of Flutes

STANDARD SERIES STI-HT

Pitch Diameter Limit / EDP Numbers H2

Dimensions Length of Length Thread Overall

—

TUUN2E2NEXA

.354

2.205

—

TUUN4H2NEXA

.512

2.48

—

TUUN6J2NEXA

.551

2.756

—

TUUN8J2NEXA

.591

3.15

.591

3.15

.591

3.15

.748

3.543

.748

3.543

.906

3.937

1.024 .906

4.331 3.937

1.024 1.024

4.331 4.331

1.024

4.331

1.024

4.331

8 10

—

1/4

—

— 28

5/16

—

3/8

—

24 — 24

3 3 3

TUUNAM3NEXA TUUNAJ3NEXA

TUU04N3NEXA TUU04K3NEXA

TUU05O3NEXA

4 4

7/16

—

7/16

—

4 4

1/2

—

1/2

—

4 4

2015 YAMAWA PRODUCT CATALOG

TUU06P4NEXA

TUU06M3NEXA TUU07Q4NEXA TUU07N4NEXA TUU08R4NEA TUU08NNEXA

STANDARD SERIES HT Hand Taps for Unified Threads

NEW BRIGHT FINISH

HT are manufactured from YMW’s own high speed steel for maximum toughness and wear life. HT are the most popular style of general purpose taps for tapping under power. Plug Style (4 threads chamfered) DIN lengths with ANSI shank dimensions.

Nominal Size

TPI NC NF UNC UNF

No. of Flutes

STANDARD SERIES HT

Pitch Diameter Limit / EDP Numbers H1

.314

1.772

.354

2.205

TSUN5H3NEB4

.433

2.205

3 3

TSUN6J3NEB4 TSUN6H3NEB4

.433 .433

2.205 2.205

.512 .551

2.480 2.756

.551

2.756

.591 .591

3.150 3.150

—

24 —

—

4 4

TSUNAM3NEB4 TSUNAJ3NEB4

TSUNCM3NEB4

10 12

Dimensions Length Overall

TSUN4H3NEB4

—

TSUN2E2NEB4

Length of Thread

TSUN8J3NEB4

1/4

24 20

—

1/4

—

.591

3.150

5/16

—

TSU05O4NEB4

.748

3.543

5/16

—

TSU05M4NEB4

.748

3.543

3/8

16 —

24 — 24

.906

3.937

.906

3.937

7/16

—

7/16

—

TSU07N4NEB4

1/2

—

TSU08R4NEB4

1/2

—

9/16

—

4 4

9/16

—

TSU04N4NEB4

2015 YAMAWA PRODUCT CATALOG

TSU04K3NEB4

TSU06P5NEB4

TSU06M4NEB4 TSU07Q5NEB4 TSU08R5NEB4

TSU08N4NEB4 TSU09S5NEB4 TSU09O5NEB4

.906

3.937

.906

3.937

1.024

4.331

1.024

4.331

1.024 1.024

4.331 4.331

STANDARD SERIES HT Hand Taps for Unified Threads

NEW BRIGHT FINISH

TPI Nominal NC NF Size UNC UNF 11

5/8 5/8

—

3/4 3/4

10 —

7/8

1 1/4 1 3/8

8 7 6

4 4

—

— —

H5 —

— —

4 4 4

STANDARD SERIES HT

Pitch Diameter Limit / EDP Numbers

Flutes

— 18

—

No.

H5 1

—

TSU16X7NEB4

—

— —

TSU22Z6NEB4

—

Length of Thread 1.024

Dimensions Length Overall 4.331

TSU10O5NEB4

TSU10U6NEB4 — TSU12V6NEB4

1.024 1.299

4.921

TSU12P5NEB4

—

1.299

4.921

TSU14W6NEB4

1.299

5.512

1.457

6.299

1.929

7.087

4.331

2.165 7.874

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES HT Hand Taps for Unified Threads

NEW OXIDE FINISH

For Tapping Steels, Irons, Brass, and Plastics HT are manufactured from YMW’s own high speed steel for maximum toughness and wear life. HT are the most popular style of general purpose taps for tapping under power. Plug Style (5 threads chamfered) DIN lengths with ANSI shank dimensions. Nominal Size

TPI NC NF UNC UNF

No. of Flutes

STANDARD SERIES HT

Pitch Diameter Limit / EDP Numbers H2

Dimensions H5

Length of Thread

Length Overall

—

TSUN4H3NEX5

.354

2.205

—

TSUN5H3NEX5

.433

2.205

—

3 3

TSUN6J3NEX5 TSUN6H3NEX5

.433 .433

2.205 2.205

—

TSUN8J3NEX5

.512

2.480

24 —

—

TSUNAM3NEX5

TSUNAJ3NEX5

—

TSUNAJ3NEX5

1/4

—

5/16

—

5/16

—

3/8

16 —

3/8

TSU04N4NEX5

.551

2.756

.551

2.756

.591

3.150

TSU05O4NEX5

.591 .748

3.150 3.543

TSU05M4NEX5

.748

3.543

—

.906 .906

3.937 3.937

7/16

—

7/16

—

1/2

—

1/2

—

TSU06P5NEX5 TSU06M4NEX5 TSU07Q5NEX5 TSU07N4NEX5 TSU08R5NEX5 TSU08N4NEX5

.906

3.937

.906

3.937

1.024

4.331

1.024

4.331

9/16

—

TSU09S5NEX5

1.024

4.331

9/16

—

TSU09O5NEX5

1.024

4.331

5/8

11 —

—

1.024

4.331

5/8

3/4

—

3/4

—

7/8 1

2015 YAMAWA PRODUCT CATALOG

TSU10U6NEX5 TSU10O5NEX5

1.024

4.331

1.299

4.921

1.299

4.921

TSU14W6NEX5

1.299

5.512

TSU16X7NEX5

1.457

6.299

TSU12V6NEX5 TSU12P5NEX5

1"-8UN H7

STANDARD SERIES HT Hand Taps for Unified Threads

NEW BRIGHT FINISH

For Tapping Steels, Irons, Brass, and Plastics HT are manufactured from YMW’s own high speed steel for maximum toughness and wear life. HT are the most popular style of general purpose taps for tapping under power. Bottoming (1.5 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI Nominal NC NF Size UNC UNF

No. Flutes

— 56 —

48 —

3 3

—

2 2 3

TSUN1C1NEBA

—

6 6

— 32 —

—

— 24 —

10 10 12 12 1/4 1/4

24 — 20 —

H1 TSUN0B1NEBA

3 3

— 36

—

4 4

— 28 —

4 4 4

STANDARD SERIES HT

H2 TSUN0B2NEBA

Dimensions Length of Thread .236

Length Overall 1.772

.275

TSUN1C2NEBA

1.772

.275

1.772

TSUN2E1NEBA TSUN2D1NEBA

TSUN2E2NEBA TSUN2D2NEBA

.314

1.772

TSUN3F1NEBA

TSUN3F2NEBA

.314

1.772

TSUN3E1NEBA

TSUN3E2NEBA

.354 .354

2.205 2.205

.354

2.205

TSUN4H2NEBA TSUN4F1NEBA

TSUN4H3NEBA

TSUN4F2NEBA TSUN5H2NEBA

TSUN5H3NEBA

.354 .433

2.205 2.205

TSUN5G2NEBA TSUN6J2NEBA TSUN6H2NEBA

TSUN5G3NEBA TSUN6J3NEBA TSUN6H3NEBA

.433 .433 .433

2.205

TSUN8J2NEBA TSUN8I2NEBA

TSUN8J3NEBA TSUN8I3NEBA

TSUNAM2NEBA

TSUNAM3NEBA

TSUNAJ2NEBA TSUNCM2NEBA TSUNCK2NEBA

TSUNAJ3NEBA TSUNCM3NEBA TSUNCK3NEBA TSU04N3NEBA

TSU04K2NEBA

TSU04K3NEBA

TSU04N4NEBA

—

TSU05O3NEBA

TSU05O4NEBA

5/16

—

TSU05M3NEBA

TSU05M4NEBA

3/8 3/8

24 —

—

4 4

TSU06M3NEBA

7/16

—

7/1 6

—

1/2

20 —

1/2 9/16

— 12

9/16

—

4 4 4 4

2015 YAMAWA PRODUCT CATALOG

TSU06P3NEBA

TSU07Q5NEBA

2.480 2.480 2.756

.551

2.756

.591

3.150

.591

3.150

.591 .591

3.150 3.150

.748 .748

3.543 3.543

.906

3.937

.906

3.937

.906

3.937

.906

3.937

TSU08R5NEBA

1.024 1.024

4.331 4.331

TSU09S4NEBA

TSU09S5NEBA

TSU09O4NEBA

TSU09O5NEBA

1.024

TSU07N4NEBA TSU08R4NEBA

TSU08N3NEBA

TSU06P5NEBA

TSU06M4NEBA TSU07Q4NEBA

TSU07N3NEBA

2.205 2.205

.512 .512 .551

5/16

—

TSUN1D2NEBA

— 40

Pitch Diameter Limit / EDP Numbers

— —

—

TSU08N4NEBA

1.024

4.331 4.331

STANDARD SERIES HT Hand Taps for Unified Threads

NEW BRIGHT FINISH

For Tapping Steels, Irons, Brass, and Plastics HT are manufactured from YMW’s own high speed steel for maximum toughness and wear life. HT are the most popular style of general purpose taps for tapping under power. Bottoming (1.5 threads chamfered) DIN lengths with ANSI shank dimensions.

TPI Nominal NC NF Size UNC UNF 5/8

5/8 3/4

18 10

3/4 7/8

Flutes 4

H4 TSU10U4NEBA TSU10O4NEBA

1 1/8

12 7

1 1/8

TSU12P4NEBA TSU14Q4NEBA

1 1/4 1 1/4 1 3/8 1 3/8 1 1/2 1 1/2

12 12

TSU14W5NEBA

TSU16S5NEBA

TSU16S6NEBA

TSU18S5NEBA

TSU18Y6NEBA TSU18S6NEBA TSU20Y6NEBA TSU20S6NEBA

TSU20Y8NEBA

TSU20S5NEBA

TSU22Z8NEBA

TSU22S5NEBA

TSU22Z6NEBA TSU22S6NEBA

4 6

TSU24S5NEBA

6 4

TSU16X7NEBA TSU18Y7NEBA

TSU24Z6NEBA

TSU24Z8NEBA TSU24S7NEBA

1.024

TSU12V6NEBA

1.024 1.299

TSU14W6NEBA TSU14Q6NEBA

Dimensions Length Overall 4.331 4.331

1.299

4.921 4.921

1.299 1.299

5.512 5.512

1.457

6.299

Length of Thread

TSU10U6NEBA

TSU12P5NEBA

TSU10O5NEBA

TSU16X5NEBA

4 12

TSU12V5NEBA

4 14

STANDARD SERIES HT

Pitch Diameter Limit / EDP Numbers

No.

H5 1

4 16

7/8

1.457

6.299

1.732 1.732

7.087 7.087

1.929

7.087 7.087

1.929 2.165 2.165

7.874 7.874

2.323 2.323

7.874 7.874

2015 YAMAWA PRODUCT CATALOG

STANDARD SERIES HT Hand Taps for Unified Threads

NEW OXIDE FINISH

For Tapping Steels, Irons, Brass, and Plastics HT are manufactured from YMW’s own high speed steel for maximum toughness and wear life. HT are the most popular style of general purpose taps for tapping under power. Bottoming (1.5 threads chamfered) DIN lengths with ANSI shank dimensions.

Nominal Size 4

TPI NC NF UNC UNF 40

—

No. of Flutes

STANDARD SERIES HT

Pitch Diameter Limit / EDP Numbers H2

Length of Thread

Dimensions Length Overall

TSUN4H3NEXA

.354

2.205

TSUN5H3NEXA

.433

2.205

TSUN6J3NEXA

—

3 3

TSUN6H3NEXA

.433 .433

2.205 2.205

—

TSUN8J3NEXA

.512

2.480

—

TSUNAM3NEXA

24 —

—

4 4

TSUNAJ3NEXA TSUNAJ3NEXA TSU04N4NEXA

.551

2.756

.551

2.756

.591

3.150 3.150 3.150 3.543

1/4

—

1/4

—

5/16

—

4 4

TSU05O4NEXA

.591 .591 .748

5/16

—

TSU05M4NEXA

.748

3.543

3/8

—

TSU06M4NEXA

—

TSU07N4NEXA

3.937

.906

7/16

.906

3.937

1.024

4.331

1.024

4.331

1.024

4.331

1.024

4.331

1/2

—

1/2

9/16

—

5/8 5/8

11 —

— 18

3/4

—

3/4

—

7/8 1

9 8

4 4 4 4

TSU04K3NEXA

TSU08R5NEXA TSU08N4NEXA TSU09O5NEXA

TSU10O5NEXA

TSU10U6NEXA TSU12V6NEXA

TSU12P5NEXA

1.024

4.331

1.299

4.921

1.299

4.921 5.512 6.299

—

TSU14W6NEXA

1.299

—

TSU16X7NEXA

1.457

2015 YAMAWA PRODUCT CATALOG

ZELX SS Spiral Pointed Taps for Stainless Steels for Unified Threads For Stainless Steels, Alloy Steels, and Ductile Irons ZELX SS Spiral Pointed Taps are designed for difficult jobs including the stainless steel family of materials as well as alloy steels, high carbon steel and ductile irons. Our unique design ZELX SS taps increase productivity through longer tool life. The unique spiral point chamfer makes them ideally suited for the through hole of difficult to machine materials. ZELX SS taps are suitable for UNJ Aerospace internal threading applications. Plug Style (3 to 5 threads chamfered) Custom Blended Vanadium High Speed Steel

Nominal Size

TPI NC NF UNC UNF

3218 - Machine Screw sizes with oxide surface treatment 3228 - Fractional sizes with oxide surface treatment 3218T - Machine Screw sizes with TiN (Titanium Nitride) 3228T - Fractional sizes with TiN (Titanium Nitride) Pitch Diameter Limit / EDP Numbers

No. of Flutes

H2 TiN

H3 TiN

H4 TiN

382923 —

—

— —

382602 —

— —

2 3

56 48

— —

2 2

382623 382600

4 4

40 —

— 48

2 2

382601 382683

382901 —

5 6

40 32

— —

3 3

382603 382604

—

— 382605*

6 8 8

— 32 —

40 — 36

3 3 3

382684 382606 382686

— — —

10 10 12 12

24 — 24 —

— 32 — 28

3 3 3 3

— 382611 — —

— — —

1/4 1/4 5/16 5/16

20 — 18 —

— 28 — 24

3 3 3 3

— — — —

3/8 3/8

16 —

— 24

3 3

7/16 7/16

14 —

— 20

1/2 1/2 9/16 9/16

13 — 12 —

5/8 5/8 3/4 3/4

H5 — —

Dimensions Length of Length of Length Thread Neck Overall

— —

.256 .295

.181 .205

1-3/4 1-13/16

— —

.335 .335

.227 .227

1-7/8 1-7/8

382612 —

— —

382634 —

— —

— 382905

— 382608

— —

— 382635

— 382659

— 382665

.374 .413

.251 .274

1-15/16 2

382607* —

— 382907 —

— 382629 —

— — —

— 382637 —

— 382660 —

— 382667 —

.413 .453 .453

.274 .297 .297

2 2-1/8 2-1/8

—

382609* 382610* 382609* 382689*

382909 382910 — —

— 382630 — —

— — — —

382639 382640 — —

382690 382661 — —

382669 382670 — —

.531 .531 .571 .571

.344 .344 .366 .366

2-3/8 2-3/8 2-3/8 2-3/8

— — — —

382613* 382614* 382615* 382616*

382913 382914 382915 382916

— 382631 — 382632

— — — —

382643 382644 382645 382646

382590 382662 — 382663

382673 382674 382675 382676

.591 .591 .669 .669

.409 .409 .456 .456

2-1/2 2-1/2 2-23/32 2-23/32

— —

382617* 382618*

382917 382918

— 382633

— —

382647 382648

— 382664

382668 382678

.748 .748

.502 .502

2-15/16 2-15/16

3 3

— —

382619* 382620*

382919 382920

— —

382649 382650

— 382691

— 382680

.866 .866

— —

3-5/32 3-5/32

— 20 — 18

3 3 3 3

— — — —

382621* 382622* 382653* 382654*

382921 382922 382953 382954

— — — —

382651 382652 — —

— 382692 — —

382681 382682 — —

.984 .984 .984 .984

— — — —

3-3/8 3-3/8 3-19/32 3-19/32

11 —

— 18

3 3

— —

382625* 382626*

382925 382926

— —

382655 382656

— 382694

— 382591

1.083 1.083

— —

3-13/16 3-13/16

10 —

— 16

3 3

— —

382627* 382628*

382927 382928

— —

382657 382658

— —

— 382592

1.201 1.201

— —

4-1/4 4-1/4

— 382636 — —

*Also available in Bright Finish.

2015 YAMAWA PRODUCT CATALOG

ZELX SS (continued) Spiral Pointed Taps for Stainless Steels for Unified Threads For Stainless Steels, Alloy Steels, and Ductile Irons ZELX SS Spiral Pointed Taps are designed for difficult jobs including the stainless steel family of materials as well as alloy steels, high carbon steel and ductile irons. Our unique design ZELX SS taps increase productivity through longer tool life. The unique spiral point chamfer makes them ideally suited for the through hole of difficult to machine materials. ZELX SS taps are suitable for UNJ Aerospace internal threading applications. Plug Style (3 to 5 threads chamfered) Custom Blended Vanadium High Speed Steel

TPI Nominal NC NF Size UNC UNF

No. of Flutes

Pitch Diameter Limit / EDP Numbers H2

H2 TiN

H3 TiN

H4 TiN

Dimensions Length of Length of Length Thread Neck Overall

7/8

—

4-11/16

— —

— — —

—

3 3

382995 382996 382997

1.339

14 —

382695 382696 382697

—

— 8

— — —

—

7/8 1

382699 —

— —

1.339 1.496

— —

4-11/16 5-1/8

—

382679

—

1.496

—

5-1/8

1-1/8 1-1/8

7 —

— 12

4 4

— —

— 382701

382700 —

— —

1.535 1.535

— —

5-7/16 5-7/16

1-1/4 1-1/4

7 —

— 12

4 4

— —

— 382703

382702 —

— —

1.535 1.535

— —

5-3/4 5-3/4

1-3/8 1-3/8

6 —

— 12

4 4

— —

— 382706

382705 —

— —

1.811 1.811

— —

6-1/16 6-1/16

1-1/2 1-1/2

6 —

— 12

4 4

— —

— 382708

382707 —

— —

1.811 1.811

— —

6-3/8 6-3/8

—

1-3/4

—

382709

1.929

—

4-1/2

—

382710

1.929

2015 YAMAWA PRODUCT CATALOG

7 —

7-5/8

ZELX SS 6” Extended Spiral Pointed Taps for Stainless Steels for Unified Threads For Stainless Steels, Alloy Steels, and Ductile Irons ZELX SS Spiral Pointed Taps are designed for difficult jobs including the stainless steel family of materials as well as alloy steels, high carbon steel and ductile irons. Our unique design ZELX SS taps increase productivity through longer tool life. The unique spiral point chamfer makes them ideally suited for the through hole of difficult to machine materials. ZELX SS taps are suitable for UNJ Aerospace internal threading applications. Taps have oxide surface treatment. Plug Style (3 to 5 threads chamfered) Custom Blended Vanadium High Speed Steel

Nominal Size

Threads per inch NC NF UNC UNF

3718 - Machine Screw sizes 3728 - Fractional sizes

Pitch Diameter Limit / EDP Numbers No. of

Dimensions Length Overall

382523 382500 382501

— — —

6" 6" 6"

2 3 4

56 48 40

— — —

Flutes 2 2 2

6 8

32 32

— —

3 3

— —

382505 382507

6" 6"

10 10

24 —

— 32

3 3

— —

382509 382510

6" 6"

1/4 1/4

20 —

— 28

3 3

— —

382513 382514

6" 6"

5/16

—

382515

5/16

—

382516

3/8 3/8

16 —

— 24

3 3

— —

382517 382518

6" 6"

7/16 7/16

14 —

— 20

3 3

— —

382519 382520

6" 6"

1/2 1/2

13 —

— 20

3 3

— —

382521 382522

6" 6"

2015 YAMAWA PRODUCT CATALOG

ZELX SS Spiral Pointed Taps for Stainless Steels for Metric Threads For Stainless Steels, Alloy Steels, and Ductile Irons ZELX SS Spiral Pointed Taps are designed for difficult jobs including the stainless steel family of materials as well as alloy steels, high carbon steel and ductile irons. Our unique design ZELX SS taps increase productivity through longer tool life. The unique spiral point chamfer makes them ideally suited for the through hole of difficult to machine materials. ZELX SS taps are suitable for UNJ Aerospace internal threading applications. Taps have oxide surface treatment. Plug Style (3 to 5 threads chamfered) Custom Blended Vanadium High Speed Steel

Nominal Size

3278 - Oxide surface treatment 3278T - TiN (Titanium Nitride)

Pitch Diameter Limit / EDP Numbers

No. of Flutes

D3 TiN

D4 TiN

—

— — 372917 372919 —

M3 x 0.5 M3.5 x 0.6

3 3

372615 —

372915 —

M4 x 0.7 M5 x 0.8 M6 x 1 M7 x 1

3 3 3 3

— —

—

M8 x 1 M8 x 1.25

3 3

— — —

M10 x 1.25 M10 x 1.5 M12 x 1.25 M12 x 1.75

3 3 3 3

— —

—

M14 x 1.5 M14 x 2 M16 x 1.5

3 3 3

— — —

—

— — — —

M16 x 2 M18 X 1.5 M18 x 2.5

3 3 3

— —

—

372616 372617* 372619* —

— — —

Dimensions

D5 TiN

D6 TiN

—

— — —

— — — —

372620 372621 372622 372623

372920 — — 372923 — — —

— — — —

—

— 372625 — 372627

—

— — —

372628 — 372630

— — —

— 372632

372624 — 372626 — — —

—

— — — — 372925 — 372927 —

Length of Length Thread .374

Length of

.413

Neck .251 .274

Overall 1-15/16 2

.453 .531 .591 .669

.297 .344 .409 .456

2-1/8 2-3/8 2-1/2 2-23/32

— —

.669 .669

.456 .456

2-23/32 2-23/32

— —

.748 .748

2-15/16 2-15/16

—

.984 .984

.502 .502 —

—

— —

372629 —

— —

372631 —

—

372633

3-3/8 3-3/8

.984 .984 1.083

— — — —

3-19/32 3-19/32 3-13/16

1.083 1.083 1.083

— — —

3-13/16 4-1/32 4-1/32

*Also available in Bright Finish.

2015 YAMAWA PRODUCT CATALOG

ZELX SS Spiral Fluted Taps for Stainless Steels for Unified Threads ZELX SS Spiral Fluted Taps are designed for difficult jobs including the stainless steel family of materials as well as alloy steels, high carbon steel and ductile irons. Our unique design ZELX SS taps increase productivity through longer tool life. The modified bottom chamfer makes them ideally suited to blind hole tapping. ZELX Spiral Fluted Taps are oxide surface treated or Titanium Nitride (TiN) coated to reduce loading and galling of product material, improving tap wear life and thread quality. Necked design enhances flow of cutting fluid to cutting teeth and reduces surface contact between the tool and work-piece for more efficient threading. ZELX SS taps are suitable for UNJ Aerospace internal threading applications. The special ZELX tool geometry creates less torque, better removal of chips and runs cooler. Modified Bottoming Style (2 1/2 - 3 1/2 to 5 threads chamfered) 3318 - Machine Screw sizes with steam oxide surface 3328 - Fractional sizes with steam oxide surface treatment 3318T - Machine Screw sizes with TiN (Titanium Nitride) 3328T - Fractional sizes with TiN (Titanium Nitride) Pitch Diameter Limit / EDP Numbers Dimensions Nominal NC TPI NF Length of Length of Length Size

No. of Flutes

UNC UNF

—

H2 TiN

384623

—

3 4 4

—

384600

—

40 —

— 48

2 2

384601 384683

384901 —

384602 —

5 6

40 32

— —

3 3

384603 384604

384903 —

— 384605*

6 8 8

— 32 —

40 — 36

3 3 3

384684 384606 —

— — —

10 10

24 —

— 32

3 3

384624 384611

— — —

H3 TiN

—

— — —

—

H4 TiN

—

Thread

—

.157

— — —

.197 .236 .236

Neck

Overall

.280 .303

1-3/4 1-13/16

.326 .326

1-7/8 1-7/8

— 384629 —

— — —

— 384634 —

— 384905

— 384636

— —

— 384635

— 384659

— 384665

.236 .276

.389 .411

1-15/16 2

384605* 384606* 384687*

— 384907 —

— 384638 —

— — —

— 384637 —

— 384660 —

— 384667 —

.276 .276 .276

.411 .474 .474

2 2-1/8 2-1/8

384609* 384610*

384909 384910

— 384630

— —

384639 384640

384690 384662

384669 384670

.354 .276

.521 .599

2-3/8 2-3/8

.354

.583

2-3/8

384673 384674

.433 .354

— —

384675 384676

.472 .394

.567 .646

2-1/2 2-1/2

.653 .731

2-23/32 2-23/32

— —

384677 384678

.551 .394

2-15/16 2-15/16 3-5/32 3-5/32

—

1/4 1/4

20 —

— 28

3 3

— —

384688*

—

— —

384913 384914

— 384631

— —

5/16 5/16

18 —

— 24

3 3

— —

384613* 384614*

— —

384615* 384616*

384915 384916

— 384632

— —

384643 384644 384645 384646

3/8 3/8

16 —

— 24

3 3

— —

384917 384918

384647 384648

14 —

— 20

3 3

— —

384919 384920

— 384633 — —

— —

7/16 7/16

384617* 384618* 384619* 384620*

— —

384649 384650

— 384691

384679 384680

.591 .472

.699 .856 — —

1/2 1/2

13 —

— 20

3 3

— —

384621* 384622*

384921 384922

— —

384651 384652

— 384692

384681 384682

.630 .472

— —

3-3/8 3-3/8

9/16 9/16

12 —

— 18

3 3

— —

384653 384654*

384953 384954

— —

— 384698

— —

.709 .512

— —

3-19/32 3-19/32

5/8 5/8

11 —

— 18

3 3

— —

384625* 384626*

384925 384926

— —

384655 384656

— —

— 384672

.748 .512

— —

3-13/16 3-13/16

3/4 3/4

10 —

— 16

4 4

— —

384627* 384628*

384927 384928

— —

384657 384658

— —

— 384686

.827 .591

— —

4-1/4 4-1/4

7/8 7/8

9 —

— 14

4 4

— —

384695 384696

384995 384996

.827 .709

— —

4-11/16 4-11/16

— —

—

— —

— — 384664

— —

—

— —

*Also available in Bright Finish.

2015 YAMAWA PRODUCT CATALOG

TPI Nominal NC NF UNC UNF Size

3318 - Machine Screw sizes with steam oxide surface 3328 - Fractional sizes with steam oxide surface treatment 3318T - Machine Screw sizes with TiN (Titanium Nitride) 3328T - Fractional sizes with TiN (Titanium Nitride)

Pitch Diameter Limit / EDP Numbers No. of Flutes

H2 TiN

H3 TiN

Dimensions Length of Length of Length Thread Neck Overall

H4 TiN

384997 —

— —

—

.984

—

.709

— —

5-1/8 5-1/8

—

384697 384668

1-1/8 1-1/8 1-1/4 1-1/4

7 — 7 —

— 12 — 12

4 4 4 4

— — — —

— 384702 — 384705

384701 — 384703 —

— — — —

1.181 0.787 1.181 0.787

— — — —

5-7/16 5-7/16 5-3/4 5-3/4

1-3/8 1-3/8 1-1/2 1-1/2

6 — 6 —

— 12 — 12

4 4 4 4

— — — —

— 384707 — 384711

384706 — 384709 —

— — — —

1.575 0.787 1.575 0.787

— — — —

6-1/16 6-1/16 6-3/8 6-3/8

1-3/4 2

5 4-1/2

— —

4 4

— —

1.772 1.969

— —

7 7-5/8

2015 YAMAWA PRODUCT CATALOG

— —

384714 384715

TPI Nominal Size

NC UNC 40

NF UNF —

No. of Flutes

5 6 6 8

— —

10 10

24 —

1/4 1/4

20 —

5/16 5/16

18 —

3/8 3/8

16 —

32 — 32

7/16 1/2 1/2

13 —

9/16

3318 - Machine Screw sizes 3328 - Fractional sizes Pitch Diameter Limit / EDP Numbers

384001

384002

—

3 3 3 3

384003 384004 384084

— 384005 384007

— — — —

3 3

384009 384010

3 3

Length of Thread

Dimensions Length of Neck

Length Overall

—

.236

.326

1-7/8

— 384037

— — —

.236 .276 .276 .276

.389 .411 .411 .474

2 2 2-1/8

— —

384039 384040

— —

.354 .276

.521 .599

2-3/8 2-3/8

384013 384014

— —

384043 384044

— —

.433 .354

.567 .646

2-1/2 2-1/2

3 3

384015 384016

— —

384045 384046

— —

.472 .394

.653 .731

2-23/32 2-23/32

— 24

3 3

384017 384018

— 384033

384047 384048

.551 .394

.699 .856

2-15/16 2-15/16

— 20

3 3

384019 384020

— —

384049 384050

— —

.591 .472

— —

3-5/32 3-5/32

—

3 3

384021 384022

— —

384051 384052

— —

.630 .472

— —

3-3/8 3-3/8

40 — — 32 — 28 —

20 —

5/8 5/8

11 —

—

3/4

—

— 16

—

384077 —

1-15/16

384054

—

.512

—

3 3

384025 384026

— —

384055 384056

— —

.748 .512

— —

3-13/16 3-13/16

384027 384028

— —

—

.827

—

.591

—

4-1/4 4-1/4

2015 YAMAWA PRODUCT CATALOG

— —

3-19/32

ZELX SS Spiral Fluted Taps for Stainless Steels for Metric Threads ZELX SS Spiral Fluted Taps are designed for difficult jobs including the stainless steel family of materials as well as alloy steels, high carbon steel and ductile irons. Our unique design ZELX SS taps increase productivity through longer tool life. The modified bottom chamfer makes them ideally suited to blind hole tapping. ZELX Spiral Fluted Taps are oxide surface treated or Titanium Nitride (TiN) coated to reduce loading and galling of product material, improving tap wear life and thread quality. Necked design enhances flow of cutting fluid to cutting teeth and reduces surface contact between the tool and work-piece for more efficient threading. ZELX SS taps are suitable for UNJ Aerospace internal threading applications. The special ZELX tool geometry creates less torque, better removal of chips and runs cooler. Modified Bottoming Style (2 1/2 to 3 1/2 threads chamfered)

Nominal Size

No. of Flutes

3378 - Oxide surface treatment 33278T - TiN treatment (Titanium Nitride)

Pitch Diameter Limit / EDP Numbers D3

D3 TiN

374915 — — —

— 374616 374617* 374619*

D4 TiN — — — — 374917 374919

Length Overall

D6 TiN

— — — — — —

— — — —

.197 .276 .276 .354

.428 .411 .474 .521

2-1/8 2-3/8

— — — — — — — —

— —

.433 .433

.567 .692

2-1/2 2-23/32

— —

.472 .472

.653 .653

2-23/32 2-23/32

—

.472 .512 .551 .591

.778 .738 — —

2-15/16 2-15/16 3-3/8 3-3/8

3 3 3 3

374615 — — —

M6 x 1 M7 x 1

3 3

— —

374620 374621

— — — — — — — — 374920 —

M8 x 1 M8 x 1.25

3 3

— —

374622 374623

— 374923

M10 x 1.25

—

374624

M10 x 1.5 M12 x 1.25 M12 x 1.75

3 3 3

— — —

— 374626 —

M14 x 1.5 M14 x 2 M16 x 1.5

3 3 3

— — —

— — — — — — —

M16 x 2 M18 x 1.5 M18 x 2.5

3 4 4

— — —

2015 YAMAWA PRODUCT CATALOG

Dimensions Length of Neck

D5 TiN

M3 x 0.5 M3.5 x 0.6 M4 x 0.7 M5 x 0.8

— — — — — — — — — — — — — — —

Length of Thread

— — —

— — 374926 — — — — — — —

— — — 374625 — 374627

374925 — 374927

— — —

1-15/16 2

374628 — 374630

— — —

— 374629 —

.551 .709 .551

— — —

3-19/32 3-19/32 3-13/16

— 374632 —

— — —

374631 — 374633

.709 .551 .787

— — —

3-13/16 4-1/32 4-1/32

Nominal Size

No. of Flutes

3378 - Oxide surface treatment

Pitch Diameter Limit / EDP Numbers D3 374015

Length of Thread

Dimensions Length of Neck

—

.197

.428

1-15/16

— —

.276 .354

.474 .521

2-1/8 2-3/8

—

Length Overall

M3 x 0.5

M4 x 0.7 M5 x 0.8

3 3

— —

M6 x 1

—

374020

—

.433

.567

2-1/2

M8 x 1 M8 x 1.25

3 3

— —

374022 374023

— —

.472 .472

.653 .653

2-23/32 2-23/32

M10 x 1.25 M10 x 1.5

3 3

— —

374024 —

— 374025

— —

.472 .512

.778 .738

2-15/16 3-3/8

M12 x 1.25 M12 x 1.75

3 3

— —

374026 —

— 374027

— —

.551 .591

— —

3-3/8 3-19/32

M14 x 1.5 M14 x 2

3 3

— —

— 374029

.551 .709

— —

3-19/32 3-13/16

M16 x 2

—

374031

.709

—

4-1/32

2015 YAMAWA PRODUCT CATALOG

374017 374019

374028 — —

ZELX SS 6” Extended Spiral Fluted Taps for Stainless Steels for Unified Threads ZELX SS taps are suitable for UNJ Aerospace internal threading applications. Custom Blended Vanadium High Speed Steel. For Stainless Steels Alloy Steels and Ductile Irons. Taps have oxide surface treatment. 6” extended taps have the same approximate thread lengths as corresponding non-extended taps. Modified Bottoming Style (2 1/2 to 3 1/2 threads chamfered) Threads per inch Nominal Size

NC UNC

NF UNF

56 48 40

—

3 4

— —

6 8

32 32

10 10

No. of Flutes

3818 - Machine Screw sizes 3828 - Fractional Sizes Pitch Diameter Limit / EDP Numbers

Dimensions Overall Length

384523

—

2 2

384500 384501

— —

6" 6"

— —

3 3

— —

384505 384507

6" 6"

24 —

— 32

3 3

— —

384509 384510

6" 6"

1/4 1/4

20 —

— 28

3 3

— —

384513 384514

6" 6"

5/16

—

384515

3/8 3/8

16 —

— 24

3 3

— —

384517 384518

6" 6"

7/16 7/16

14 —

— 20

3 3

— —

384519 384520

6" 6"

1/2 1/2

13 —

— 20

3 3

— —

384521 384522

6" 6"

2015 YAMAWA PRODUCT CATALOG

ZELX SS PIPE Slow Spiral Fluted Pipe Taps for Stainless Steels, for NPT and NPTF Threads For American Taper Pipe Threads ZELX SS Spiral Fluted Pipe Taps are designed for difficult jobs including the stainless steel family of materials as well as alloy steels, high carbon steel and ductile irons. Our unique design ZELX SS Pipe taps increase productivity through longer tool life. Custom Blended Vanadium High Speed Steel. For Stainless Steels Alloy Steels and Ductile Irons. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot.

Threads per Inch

Nominal Size

EDP Numbers

No. of Flutes

Dimensions

NPT

NPTF

Length of Thread

Length Overall

1/16 1/8 (Lg. Shank)

27 27

4 4

383640 383641

383660 383661

11/16 3/4

2-1/8 2-1/8

1/8 (Sm. Shank)

383642

383662

3/4

2-1/8

1/4 3/8

18 18

4 4

383643 383644

383663 383664

1-1/16 1-1/16

2-7/16 2-9/16

1/2 3/4 1

14 14 11-1/2

4 4 4

383645 383646 383647

383665 383666 383667

1-3/8 1-3/8 1-3/4

3-1/8 3-1/4 3-3/4

Taper Pipe Taps Standard Projection Taper Pipe Tap standard projection is the distance the small end of the tap projects through an American National Standard Pipe Thread Ring Gage.

Taper Pipe Taps - General Dimensions (Inches) Nominal

Pipe Size

1/16 1/8 1/8 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2

Length Overall Length

2-1/8 2-1/8 2-1/8 2-7/16 2-9/16 3-1/8 3-1/4 3-3/4 4 4-1/4 4-1/2

Tol.

±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/16 ±1/16 ±1/16 ±1/16

Length of Thread Length

Tol.

11/16 3/4 3/4 1-1/16 1-1/16 1-3/8 1-3/8 1-3/4 1-3/4 1-3/4 1-3/4

±1/16 ±1/16 ±1/16 ±1/16 ±1/16 ±1/16 ±1/16 ±3/32 ±3/32 ±1/8 ±1/8

2015 YAMAWA PRODUCT CATALOG

Length of Square Length Tol.

3/8 3/8 3/8 7/16 1/2 5/8 11/16 13/16 15/16 1 1-1/8

±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/32 ±1/16 ±1/16 ±1/16 ±1/16

Diameter of Shank Dia.

Tol.

.3125 .3125 .4375 .5625 .7000 .6875 .9063 1.1250 1.3125 1.5000 1.8750

-.0015 -.0015 -.0015 -.002 -.002 -.002 -.002 -.002 -.003 -.003 -.003

Size of Square

†Gage Measurement

Size

Tol.

.234 .234 .328 .421 .531 .515 .679 .843 .984 1.125 1.406

-.004 -.004 -.004 -.006 -.006 -.006 -.006 -.008 -.008 -.008 -.008

Projection Tol.

.312 .312 .312 .459 .454 .579 .565 .678 .686 .699 .667

±1/16 ±1/16 ±1/16 ±1/16 ±1/16 ±1/16 ±1/16 ±3/32 ±3/32 ±3/32 ±3/32

TapDrill Sizes

Taper Per Foot Min.

Max.

23/32 23/32 23/32 23/32 23/32 23/32 23/32 23/32 23/32 23/32 23/32

25/32 25/32 25/32 25/32 25/32 25/32 25/32 25/32 25/32 25/32 25/32

First 2 or 3 Threads (Full)

C Q Q 7/16 9/16 45/64 29/32 1-9/64 1-31/64 1-23/32 2-3/16

ZELX MOLD Hand Taps for Hard-to-Machine Materials for Unified Threads First Choice for Tapping Mold Steels Ideal for tapping mold steels,tool steels and gray cast irons, YMW offers this series of ZELX Mold Taps made of Cobalt High Speed Steel, ZELX Mold Hand Taps and Mold Pipe Taps. Combined with specially designed geometry, Cobalt High Speed Steel improves the toughness of ZELX Taps for use in Prehardened Mold Steels. Furnished bright without surface treatment, taps can be surface treated upon request. Ideal for tapping mold steels, tool steels and gray cast irons. (35 to 45 HRC) YMW offers this series of ZELX Mold Taps made of Cobalt High Speed Steel. Plug Style (4 to 6 threads chamfered)

Nominal Size

Threads per Inch NC UNC

Number of flutes

2015 YAMAWA PRODUCT CATALOG

3114 - Machine Screw sizes 3124 - Fractional Sizes Pitch Diameter/EDP Numbers

Dimensions

Length of Thread

Length Overall

389606

7/8

2-3/8

ZELX CARBIDE HAND TAPS FOR UNIFIED THREADS ZELX Carb CI Carbide Hand Taps for Cast Irons, Hard Plastics, Fiberglass, Cast Brass, Cobalt, Chrome Alloys Steels ZELX Carb AL Carbide Hand Taps for Aluminum Alloys, Zinc Die Castings, Copper Alloys and Soft Plastics YMW solid ultra fine grain carbide taps are manufactured from the finest micro grain carbide for exceptional wear life and reduced chipping. For the longest tool life available from any tap, YMW offers two carbide tap designs — one for tapping cast irons and another for aluminums. Ideal for long production runs where reduced tool changes mean improved production efficiency. YMW carbide taps have also proven to be an excellent choice for threading very abrasive materials below 40HRC. Straight flute. Plug Style (3 to 5 threads chamfered) for through hole tapping Bottoming Style (1 to 2 threads chamfered) for blind hole tapping

Nominal Size

Threads per Inch NF UNF

NC UNC

Ground Thread Limits

3910 & 3917 - Machine Screw sizes 3920 & 3927 - Fractional Sizes

EDP Numbers FOR CAST IRONS FOR ALUM. ALLOYS 4 Flutes 3 Flutes Plug Bottoming Plug Bottoming LIST 3917

—

6 8

32 32

— —

H3 H3

— —

10 10

24 —

— 32

H3 H3

383806 383808

LIST 3927

Dimensions Length of Thread

Length Overall

LIST 3910 — — —

384802 384804

384801

5/8

1-5/16

384805

11/16 3/4

2 2-1/8

383807 383809

384806 384808 LIST 3920

384807

7/8 7/8

2-3/8 2-3/8

383811 383861

384810 384860

384811 384861

1 1

2-1/2 2-1/2

1/4 1/4

20 20

— —

H3 H5

383810 383860

1/4 1/4

— —

28 28

H3 H5

383812 383862

383813 383863

384812

384813 384863

1 1

2-1/2 2-1/2

5/16 5/16 5/16 5/16

18 18 — —

— — 24 24

H3 H5 H3 H5

383864 383816 383866

383815 383865 383817 383867

384814 384864 384816 384866

384815 384865 384817 384867

1-1/8 1-1/8 1-1/8 1-1/8

2-23/32 2-23/32 2-23/32 2-23/32

3/8 3/8 3/8 3/8

16 16 — —

— — 24 24

H3 H5 H3 H5

383818

383819 383869 383821 383871

384818 384868 384820 384870

384819 384869 384821 384871

1-1/4 1-1/4 1-1/4 1-1/4

2-15/16 2-15/16 2-15/16 2-15/16

7/16 7/16 7/16 7/16

14 14 — —

— — 20 20

H3 H5 H3 H5

383822 383872 383824

384822 384872

384823 384873 384825 384875

1-7/16 1-7/16 1-7/16 1-7/16

3-5/32 3-5/32 3-5/32 3-5/32

1/2 1/2 1/2

13 13 —

— — 20

H3 H5 H3

383826 383876 383828

384877 384829

1-21/32 1-21/32 1-21/32

3-3/8 3-3/8 3-3/8

1/2

—

383878

383879

1-21/32

3-3/8

5/8 5/8 5/8

11 11 —

— — 18

H3 H5 H3

383834 383884

383835 383885 383837

— — —

1-13/16 1-13/16 1-13/16

3-13/16 3-13/16 3-13/16

383886

383887

—

1-13/16

3-13/16

5/8

—

2015 YAMAWA PRODUCT CATALOG

383820 383870

383873 383825 383875 383877

384826 384876 384828

384879

ZELX CARBIDE HAND TAPS FOR METRIC THREADS ZELX Carb CI Carbide Hand Taps for Cast Irons, Hard Plastics, Fiberglass, Cast Brass, Cobalt, Chrome Alloys Steels ZELX Carb AL Carbide Hand Taps for Aluminum Alloys, Zinc Die Castings, Copper Alloys and Soft Plastics YMW solid ultra fine grain carbide taps are manufactured from the finest micro grain carbide for exceptional wear life and reduced chipping. For the longest tool life available from any tap, YMW offers two carbide tap designs — one for tapping cast irons and another for aluminums. Ideal for long production runs where reduced tool changes mean improved production efficiency. YMW carbide taps have also proven to be an excellent choice for threading very abrasive materials below 40HRC. Straight flute. Plug Style (3 to 5 threads chamfered) for through hole tapping Bottoming Style (1 to 2 threads chamfered) for blind hole tapping

Nominal Size

M3 x 0.5

EDP Numbers

Ground

FOR CAST IRONS

Thread Limits

3977 - Cast Iron Metric sizes 3970 - Aluminum Metric Sizes

Plug

4 Flutes LIST 3977

Bottoming 370001 370003

Dimensions FOR ALUM. ALLOYS 3 Flutes Plug

LIST 3970

Bottoming

Length of Thread

Length Overall

5/8

1-15/16

371001 371003

3/4

2-1/8

371007

7/8 1

2-3/8 2-1/2

371008

371009 371011

1-1/8 1-1/8

2-23/32 2-23/32

371012 371014

371013 371015

1-1/4 1-1/4

2-15/16 2-15/16

371016 371018 371020

371017 371019 371021

1-21/32 1-21/32 1-21/32

3-3/8 3-3/8 3-3/8

371000 371002

M4 x 0.7

370002

M5 x 0.8 M6 x 1

D4 D5

370004

M8 x 1 M8 x 1.25

D5 D5

370008 370010

370011

M10 x 1.25 M10 x 1.5

D5 D6

370012 370014

370015

M12 x 1.25 M12 x 1.5 M12 x 1.75

D5 D6 D6

370016 370018

370017

M14 x 1.5 M14 x 2

D6 D7

370024

370025

— —

1-21/32 1-21/32

3-19/32 3-19/32

M16 x 1.5 M16 x 2

D6 D7

370026 370028

370027 370029

— —

1-13/16 1-13/16

3-13/16 3-13/16

2015 YAMAWA PRODUCT CATALOG

371004 371006

ZELX NI Spiral Pointed Taps for Nickel Base Alloys for Unified Threads ZELX NI Taps have been designed for extended tap life in Cobalt, Nickel and Iron base exotic materials such as: Inconel, Hastelloy, Waspalloy and harder Stainless Steels, Mold and Tool Steels >30HRC. ZELX NI Taps are suitable for UNJ Aerospace internal threading applications. PM High Speed Steel. Taps have an oxide and nitride surface toughening treatment. Plug Style (3 to 5 threads chamfered) for through hole tapping

Nominal Size

NC UNC

TPI

NF UNF

No. of Flutes

3612 - Machine screw Sizes 3622 - Fractional Sizes

Pitch Diameter Limit / EDP Numbers H2

— 385502 — 385505 —

— 385504 — 385524 —

2 4 5

56 40 40

— — —

2 2 3

6 6

32 —

— 40

3 3

385523 385501 385503 — 385512

Length of Thread

Dimensions Length of Neck

Length Overall

— — — 385535 —

— — — — —

.256 .335 .374

.181 .227 .251

1-3/4 1-7/8 1-5/16

.413 .413

.274 .274

2 2

—

385507

385529

385537

385560

385567

.453

.297

2-1/8

10 10

24 —

— 32

3 3

— —

385509 385510

— 385530

385539 385540

— 385561

— 385570

.531 .531

.344 .344

2-3/8 2-3/8

1/4 1/4

20 —

— 28

3 3

— —

385513 385514

— 385531

385543 385544

— 385562

— 385574

.591 .591

.409 .409

2-1/2 2-1/2

5/16 5/16

18 —

— 24

3 3

— —

385515 385516

— 385532

385545 385546

— 385563

— 385576

.669 .669

.456 .456

2-23/32 2-23/32

3/8

—

385517

—

385547

—

385553

.748

.502

2-15/16

3/8 7/16 7/16

— 14 —

24 — 20

3 3 3

— — —

385518 385519 385520

385533 — —

385548 385549 385550

385564 — —

385578 — —

.748 .866 .866

.502 — —

2-15/16 3-5/32 3-5/32

1/2

—

385521

—

385551

—

.984

—

1/2 5/8 5/8

— 11 —

20 — 18

3 3 3

— — —

385522 385525 385526

— — —

385552 385555 385556

— — —

385582 385585 385586

.984 1.083 1.083

— — —

3-3/8 3-3/8 3-13/16 3-13/16

3/4 3/4

10 —

— 16

3 3

— —

385527 385528

— —

385557 385558

— —

—

1.201 1.201

— —

4-1/4 4-1/4

2015 YAMAWA PRODUCT CATALOG

ZELX NI Spiral Pointed Taps for Nickel Base Alloys for Metric Threads ZELX NI Taps have been designed for extended tap life in Cobalt, Nickel and Iron base exotic materials such as: Inconel, Hastelloy, Waspalloy and harder Stainless Steels, Mold and Tool Steels >30HRC. ZELX NI Taps are suitable for UNJ Aerospace internal threading applications. PM High Speed Steel. Taps have an oxide and nitride surface toughening treatment. Plug Style (3 to 5 threads chamfered) for through hole tapping

Nominal Size

No. of Flutes

3672 - Metric Sizes

Pitch Diameter Limit / EDP Numbers D3

M2.5 x 0.45

387320

M3 x 0.5 M3.5 x 0.6

3 3

387321 —

M4 x 0.7 M5 x 0.8

3 3

— —

Length of Thread

—

Dimensions Length of Neck

Length Overall

—

.295

.205

1-13/16

— 387322

— —

.374 .413

.251 .274

1-15/16 2

387323 387324

— —

.453 .531

.297 .344

2-1/8 2-3/8

M6 x 1

—

387325

—

.591

.409

2-1/2

M7 x 1 M8 x 1 M8 x 1.25

3 3 3

— — —

387326 387327 387328

— — —

.669 .669 .669

.456 .456 .456

2-23/32 2-23/32 2-23/32

M10 x 1.25 M10 x 1.5

3 3

— —

387329 —

— 387330

.748 .748

.502 .502

2-15/16 2-15/16

M12 x 1.25 M12 x 1.75

3 3

— —

387331 —

—

.984

—

3-3/8

387332

.984

—

3-3/8

2015 YAMAWA PRODUCT CATALOG

ZELX NI Spiral Fluted Taps for Nickel Base Alloys for Unified Threads ZELX NI Taps have been designed for extended tap life in Cobalt, Nickel and Iron base exotic materials such as: Inconel, Hastelloy, Waspalloy and harder Stainless Steels, Mold and Tool Steels >30HRC. ZELX NI Taps are suitable for UNJ Aerospace internal threading applications. PM High Speed Steel for blind hole. Taps have an oxide and nitride surface toughening treatment. Bottoming Style (1 to 2 threads chamfered)

3615 - Machine Screw Sizes 3625 - Fractional Sizes

Pitch Diameter Limit / EDP Numbers

Threads Per Inch Nominal Size

NC UNC

NF UNF

No. of Flutes

—

387583

387002

—

6 8

32 32

— —

3 3

387006

387005 387580

— —

10 10 1/4 1/4

24 — 20 —

— 32 — 28

3 3 3 3

— — — —

387009 381556 387013 387579

5/16 5/16

18 —

— 24

3 3

— —

387015 387577

3/8 3/8 7/16 1/2 1/2

16 — — 13 —

— 24 20 — 20

3 3 3 3 3

— — — — —

387017 387575 387573 387500 387022

5/8 5/8 3/4

11 — 10

— 18 —

4 4 4

— — —

387025 381508 387027

2015 YAMAWA PRODUCT CATALOG

— — — 387031 — — 387033 — — — — — —

Length of Thread

Dimensions Length of Neck

Length Overall

.236

.326

1-7/8

387035 387037

.276 .276

.411 .474

2 2-1/8

387040 387043 387443

.354 .276 .433 .354

.521 .599 .567 .646

2-3/8 2-3/8 2-1/2 2-1/2

387045

.472 .394

.653 .731

2-23/32 2-23/32

387047

.551 .394 .472 .630 .472

.699 .856 — — —

2-15/16 2-15/16 3-5/32 3-3/8 3-3/8

.748 .512 .827

— — —

3-13/16 3-13/16 4-1/4

387050 387051 — — —

TPI

Number of flutes

3615 - Machine Screw Sizes 3625 - Fractional Sizes Pitch Diameter Limit/EDP Numbers

NC UNC

NF UNF

—

387523

—

387501

—

387504

—

387505

387508

387535

—

387507

387529

387537

—

387509

—

387510

1/4

—

387513

1/4

—

387514

5/16

—

387515

5/16

—

387516

3/8

—

387517

387547

3/8

—

387518

387548

7/16

—

3875189

387549

7/16

—

387520

387555

1/2

—

387521

387551

1/2

—

387522

5/8

—

5/8

—

3/4

2 4 5 6 8

3/4

Dimensions Length of Thread

Length of Neck

Length Overall

.157

.280

1-3/4

.236

3.26

1-7/8

.236

.389

1-15/16

.276

.411

.276

.474

2-1/8

.354

.521

2-3/8

.276

.599

2-3/8

.433

.567

2-1/2

.354

.646

2-1/2

.472

.653

2-23/32

.394

.731

2-23/32

.551

.699

2-15/16

387578

.394

.856

2-15/16

.591

1.024

3-5/32

.472

3-5/32

387581

.630

3-3/8

387552

387582

.471

3-3/8

387525

387550

387585

.748

3-13/16

387526

387556

387586

.512

3-13/16

—

387527

387557

.827

4-1/4

387528

387558

.591

4-1/4

2015 YAMAWA PRODUCT CATALOG

387502

387512

387560

387567

387539 387530

387540

387561

387570

387543 387531

387544

387562

387574

387545 387532

387546

387563

387564

387576

ZELX NI Spiral Fluted Taps for Nickel Base Alloys for Metric Threads ZELX NI Taps have been designed for extended tap life in Cobalt, Nickel and Iron base exotic materials such as: Inconel, Hastelloy, Waspalloy and harder Stainless Steels, Mold and Tool Steels >30HRC. ZELX NI Taps are suitable for UNJ Aerospace internal threading applications. PM High Speed Steel for blind hole. Taps have an oxide and nitride surface toughening treatment. Modified Bottoming Style (3 to 4 threads chamfered)

Nominal Size

3675 - Metric Sizes

Pitch Diameter Limit / EDP Numbers

No. of Flutes

Dimensions Length of Neck

Length Overall

Length of Thread

— — —

.295 .197 .276

.205 .428 .411

1-13/16 1-15/16 2

M2.5 x 0.45 M3 x 0.5 M3.5 x 0.6

2 3 3

388320 388321 —

— — 388322

M4 x 0.7 M5 x 0.8 M6 x 1

3 3 3

— — —

388323 388324 —

— — 388325

— — —

.276 .354 .433

.474 .521 .567

2-1/8 2-3/8 2-1/2

M7 x 1 M8 x 1 M8 x 1.25

3 3 3

— — —

388326 388327 388328

— — —

.433 .472 .472

.692 .653 .653

2-23/32 2-23/32 2-23/32

M10 x 1.25 M10 x 1.5

3 3

— —

388329 —

— 388330

.472 .512

.778 .738

2-15/16 2-15/16

M12 x 1.25

—

388331

—

.551

—

3-3/8

M12 x 1.75

—

388332

.591

—

3-3/8

2015 YAMAWA PRODUCT CATALOG

HSS-P

STI Spiral Pointed Taps For Nickel Base Alloys

F o r U n if ie d Threads

ZELX NI STI

PM High Speed Steel For Nickel Base Alloys, Other Exotic Alloys, Mold and Stainless Steels > 30 HRC

STI Spiral Pointed Taps for Nickel Base Alloys for Unified S T I tThreads a p s a r e o v e r s iz e t o t h e e x t e n t t h a t t h e in t e r n a l

Z E L X N I T a p s h a v e b e e n d e s ig n e d f o r e x t e n d e d t a p lif e in C o b a lt N ic k e l a n d I r o n b a se e x o tic m a te r ia ls s u c h a s c o n eNI l, Taps H a ste llo ybeen , W adesigned s p a llo y an S ta in le tap ss S te ein lsCobalt, ,M o ld :I nZELX have fordextended life a n d T o o l S t e e ls .

w h ic h t h e y p r o d u c e w ill a c c o m m o d a te a h e lic a l c o il w ir e s c r e w th re a d in se rt, w h ic h a t fin a l sse m b ly w ill a c c e p t a s c such r e w as: t h rInconel, e a d o f Hastelloy, the Nickelnaand o m Iron in a l base s iz e exotic a n d pmaterials it c h .

Z E L X N I

t h re a d

Waspalloy and harder Stainless Steels, Mold and Tool Steels >30HRC. STI Taps are oversize to the extent that the internal thread which they produce will accommodate a helical coil wire screw threadPinsert, which at final assembly will accept a screw thread of lu g S t y le STI SPIRAL POINTED the nominal size and pitch. PM High Speed Steel for blind hole. Taps have an oxide and nitride surface toughening treatment. S TAPS Plug Style threads 3619 - Machine Screw Sizes T a c h inchamfered) e Screw L ist 3 6 1(3 9 to 5 M (3 to 5 th r e a d s c h a m fe r e d ) siz e s 3 6 2 9 3629 - Fractional T Sizes a p s h a v e a n o x id e a n d n it r id e s u r f a c e t o u g h e n in g t r e a t m e n t

F r a c tio n a l s iz e s

Threads per inch Nominal NC NF Size UNC UNF 2 4

56 40

Pitch Diameter Limit / EDP Numbers

No. of Flutes

— —

2 3

— 387203

387200 387204

— —

Length of Thread

— —

Dimensions Length of Neck

Length Overall

.335 .413

.227 .274

1-7/8 2 2-3/8

—

387208

387224

—

.531

.344

—

387209

—

.453

.297

2-1/8

—

387210

387226

—

.571

.366

2-3/8

10 10

24 —

— 32

3 3

— —

387212 387213

387228 387229

— —

.591 .591

.409 .409

2-1/2 2-1/2

1/4

—

387248

387258

—

.669

.456

2-23/32

1/4

—

387249

387259

—

.669

.456

2-23/32

5/16 5/16

18 —

— 24

3 3

— —

— 387251

387260 387261

387272 —

.748 .748

.502 .502

2-15/16 2-15/16

3/8 3/8

16 —

— 24

3 3

— —

— 387253

387262 387263

387270 —

.984 .866

— —

3-3/8 3-5/32

7/16 7/16

14 —

— 20

3 3

— —

387264 387265

— 387275

.984 .984

— —

3-19/32 3-3/8

1/2 1/2

13 —

— 20

3 3

— —

387266 387267

1.083 .984

— —

3-13/16 3-19/32

Nominal Size

Recommended Minor Diameters and Tap Drills for Inch Size STI

Threads per Inch

STI

Nomin al Size STI 2 4 6 8

Recommended Minor 10 Diameters and Tap Drills10for 1/4 Inch Size STI: 1/4

Threa ds per 2 Inch 4 UN C UNF 56 40 32 32

6 8

10 10

24 —

1/4

20 —

5/16

5/16 5/16

18 —

3/8

3/8 3/8

16 —

7/16

7/16 7/16

14 —

1/2 1/2

13 —

2015 YAMAWA PRODUCT CATALOG

1/4

5/16

3/8 7/16 1/2 1/2

— — — —

UNC 56 40 32 32

Aluminum Recommended Drill Nominal Size

UNF

Aluminum Recommended — 3/32 Drill — 31 Nominal Size Dec. — 26 Equiv. 3/32 .0938

24 —

— 31 —

26 3217

— 32

— 28

—

24 G

— 24

— 20 — 20

—

— — 13

— —

— 2014-8

— 13/64

28 7

—Q 21/64 24

17.1200

13/64

.1470 7 .1730

Dec. Equiv. .0938 .1200 .1470 .1730 .2031 .2010

H .2031

.2660

G.2010

.2610

Q.2660

.3320

.2610 21/64

.3281

X .3320

.3970

.3281

25/64

.3906

—

X 25/64 20

.3970 29/64

29/64 — 29/64

.4531 33/64

.5156

33/64

.5156

33/64 33/64

.3906 29/64 .4531 .5156 .5156

.4531 .4531

Plastic - Steel - Magnesium Recommended Drill Nominal Size Dec. Equiv.

Plastic - Steel .41 Magnesium .0960 Recommended Drill.1200 31 Nominal Size Dec. Equiv. 25 .1495 . 41 .0960 31 16 .1200.1770 25 5 16 13/64

.2055 .1495 .1770 .2031

5 H 6,7mm 13/64

.2660 .2055 .2031.2638

H Q 6,7mm 21/64

.3320 .2660 .2638.3281

Q X 21/64

25/64

.3320 .3970 .3281

X 29/64 25/64 29/64

.3970.4531 .3906.4531

29/64 17/32 29/64

.4531.5312 .4531

17/32 17/32

.5312 .5312

17/32

.3906

.5312

61 47

ZELX NI STI STI Spiral Fluted Taps for Nickel Base Alloys for Unified Threads ZELX NI Taps have been designed for extended tap life in Cobalt, Nickel and Iron base exotic materials such as: Inconel, Hastelloy, Waspalloy and harder Stainless Steels, Mold and Tool Steels >30HRC. STI Taps are oversize to the extent that the internal thread which they produce will accommodate a helical coil wire screw thread insert, which at final assembly will accept a screw thread of the nominal size and pitch. PM High Speed Steel for blind hole. Taps have an oxide and nitride surface toughening treatment. Modified Bottoming Style (3 to 4 threads chamfered)

Nominal Size

Threads per inch NF NC UNC UNF

No. of Flutes

3617 - Machine Screw Sizes 3627 - Fractional Sizes Pitch Diameter Limit / EDP Numbers

— 387403

387400 387404

— 387420

— —

3 3

— —

387408 387409

387424 —

— —

2 4

56 40

— —

3 3

6 6

32 —

— 40

Length of Thread

Dimensions Length of Neck

Length Overall

.236 .276

.326 .411

1-7/8 2

.354 .276

.521 .474

2-3/8 2-1/8

—

387410

387426

—

.354

.583

2-3/8

10 10

24 —

— 32

3 3

— —

387412 387413

387428 387429

— —

.433 .354

.567 .646

2-1/2 2-1/2

1/4

—

387448

387458

—

.472

.653

2-23/32

1/4

—

387449

—

.394

.731

2-23/32

5/16 5/16

18 —

— 24

3 3

— —

— 387451

387459 387460 387461

387470 —

.551 .394

.699 .856

2-15/16 2-15/16

3/8

—

387462

387472

.630

1.417

3-3/8

3/8

—

387453

387463

—

.472

7/16 7/16

14 —

— 20

3 3

— —

387464 387465

.709 .472

3-5/32 3-19/32 3-3/8

1/2

—

387466

— 387475

1.378 1.338 1.575

—

.748

1.456

3-13/16

1/2

—

387467

—

.512

1.535

3-19/32

2015 YAMAWA PRODUCT CATALOG

Size

UNC

UNF

Flutes

— 387403

387400 387404

— 387420

— — — —

—

6 6

32 —

— 40

3 3

— —

387408 387409

387424 —

Thread

Overall

Neck

.236

.326

.276

.411

1-7/8 2

.354 .276

.521 .474

2-3/8 2-1/8

—

387410

387426

—

.354

.583

2-3/8

10 10

24 —

— 32

3 3

— —

387412 387413

387428 387429

— —

.433 .354

.567 .646

2-1/2 2-1/2

1/4

—

387448

387458

—

.472

.653

2-23/32

1/4

—

387449

—

.394

.731

2-23/32

5/16 5/16

18 —

— 24

3 3

— —

— 387451

387459 387460 387461

387470 —

.551 .394

.699 .856

2-15/16 2-15/16

3/8

—

387462

387472

.630

1.417

3/8

—

14 —

— 20

3 3

387453 — —

387463 387464 387465

— — 387475

.472

7/16 7/16

— — —

1/2

—

387466

—

.709 .472HSS-P

1.378 1.338 1.575 N X

1/2

—

387467

—

.512

1.535

ZELXSpiral NI STI Fluted Taps for Nickel Base Alloys STI F o r U n ifie d T h re a d s

STI Spiral Fluted Taps for Nickel Base Alloys for Unified Threads

.748

1.456

3-3/8 3-5/32 3-19/32 15� 3-3/8

1.5

3-13/16

3-19/32

ZELX NI Taps have been NI designed for extended tap life in Cobalt, Nickel and Iron base exotic materials such as: Inconel, Hastelloy, ZELX

PM H igh Speed Steel For Nickel Base Alloys, Other Exotic Alloys, M o l d a n d Stainless Steels > 30 H R C . ST I t a p s a r e s p e c i a l taps used to p r e p a r e h o l e s e installation of helical coil thread wire thread for t h to oversize the extent that the internal inserts.

Waspalloy and harder Stainless Steels, Mold and Tool Steels >30HRC. STI Taps are which they produce will accommodate a helical coil wire screw thread insert, which at final assembly will accept a screw thread of the nominal size and pitch. PM High Speed Steel for blind hole. Taps have an oxide and nitride surface toughening treatment.

Bottoming Style 2 ach threads L ist 36 1 7 (1 toM in echamfered) S c re w 3 6 2 7 F n a l siz e s raecstio siz

Nominal Size

Threads per inch NF UNF

NC UNC

No. of Flutes

B o t t o m in g S t y le

(1 Screw to 2 th r e a d s c h a m fe r e d ) 3617 - Machine Sizes T a p s h a v e 3627 - Fractional Sizes a n o x id e a n d n it r id e t re a tm e n t

Pitch Diameter Limit / EDP Numbers H1

s u r f a c e t o u g h e n in g

Dimensions Length of Neck

Length of Thread

Length Overall

387419

—

.276

.411

.354 .354

.521 .583

2-3/8 2-3/8

—

387004

6 8

32 32

— —

3 3

387008 381409

10 10

24 32

— —

3 3

—

387028 387029

— —

387445 387057

.433 .354

.567 .646

2-1/2 2-1/2

387090

.472

.653

2-23/32

.856

2-15/16

— —

1/4

—

387058

—

5/16

—

387061

—

.394

3/8 3/8

16 —

— 24

3 3

—

387062

—

.630

1.417

3-3/8

387063

—

.472

1.378

3-5/32

7/16

—

387065

—

.472

1.575

3-3/8

1/2

—

7088 —

387067

—

.512

1.535

3-19/32

387085

20148

6 2

2015 YAMAWA PRODUCT CATALOG

ZELX TI Left Hand Spiral Fluted Taps for Titanium Alloys for Unified Threads For Titanium, Titanium Alloys, Magnesium and Beryllium Copper ZELX TI Slow Spiral Flute Taps have a left hand spiral flute design specifically designed to tap R.H. Threads in Titanium and Titanium Alloys. The Left Hand Slow Spiral makes this series of taps ideal for through hole tapping of right hand threads. The ZELX TI Taps are made from a PM High Speed Steel material to provide increased productivity as well as increased tap life while tapping Titanium. For through hole tapping. Taps have a nitride surface toughening treatment. Plug Style (4.5 to 6 threads chamfered)

Nominal Size

Threads per Inch NC NF UNC UNF

No. of Flutes

3613 - Machine Screw Sizes 3623 - Fractional Sizes

Pitch Diameter Limit / EDP Numbers H2

Length of Thread

Dimensions Length of Length Neck Overall

—

385623

—

.256

.181

1-3/4

4 5

40 40

— —

3 3

385601 385603

— —

.335 .374

.227 .251

1-7/8 1-15/16

6 8

32 32

— —

3 3

— —

385605 385607

— 385629

385635 385637

— 385660

— 385667

.413 .453

.274 .297

2 2-1/8

10 10

24 —

— 32

3 3

— —

385609 385610

— 385630

385640

— 385661

— 385670

.531 .531

.344 .344

2-3/8 2-3/8

1/4 1/4

20 —

— 28

3 3

— —

385613 385614

— 385631

385643 385644

— 385662

— 385674

.591 .591

.409 .409

2-1/2 2-1/2

5/16 5/16

18 —

— 24

3 3

— —

385615 385616

— 385632

385645 385646

— 385663

— 385676

.669 .669

.456 .456

2-23/32 2-23/32

3/8 3/8 7/16 7/16

16 — 14 —

— 24 — 20

3 3 3 3

— — — —

385617 385618 385619 385620

— 385633 — —

385647 385648 385649 385650

— 385664 — —

— 385678 — —

.748 .748 .866 .866

.502 .502 .984 .984

2-15/16 2-15/16 — —

1/2 1/2

13 —

— 20

3 3

— —

385621 385622

— —

385651 385652

— —

.984 .984

1.063 1.063

— —

2015 YAMAWA PRODUCT CATALOG

ZELX TI Left Hand Spiral Fluted Taps for Titanium Alloys For Metric Threads For Titanium, Titanium Alloys, Magnesium and Beryllium Copper ZELX TI Slow Spiral Flute Taps have a left hand spiral flute design specifically designed to tap R.H. Threads in Titanium and Titanium Alloys. The Left Hand Slow Spiral makes this series of taps ideal for through hole tapping of right hand threads. The ZELX TI Taps are made from a PM High Speed Steel material to provide increased productivity as well as increased tap life while tapping Titanium. For through hole tapping. Taps have a nitride surface toughening treatment. Plug Style (4.5 to 6 threads chamfered)

Nominal Size

No. of Flutes

3673 - Metric Sizes

Pitch Diameter Limits/EDP Numbers D3

—

M2.5 x 0.45

385700

M3 x 0.5 M3.5 x 0.6

3 3

385701 —

M4 x 0.7 M5 x 0.8

3 3

M6 x 1

—

M7 x 1 M8 x 1 M8 x 1.25

3 3 3

— — —

M10 x 1.25 M10 x 1.5

3 3

— —

385709 —

M12 x 1.25 M12 x 1.75

3 3

— —

385711 —

2015 YAMAWA PRODUCT CATALOG

— —

Length of Thread

Dimensions Length of Neck

Length Overall

—

.295

.205

1-13/16

— 385702

— —

.374 .413

.251 .274

1-15/16 2

385703 385704

— —

.453 .531

.297 .344

2-1/8 2-3/8

385705

—

.591

.409

2-1/2

385706 385707 385708

— — —

.669 .669 .669

.456 .456 .456

2-23/32 2-23/32 2-23/32

— 385710

.748 .748

.502 .502

2-15/16 2-15/16

— 385712

.984 .984

— —

3-3/8 3-3/8

ZELX TI Spiral Fluted Taps for Titanium Alloys For Unified Threads For Titanium, Titanium Alloys, Magnesium and Beryllium Copper ZELX TI Slow Spiral Flute Taps have a right hand spiral flute design specifically designed to tap R.H. Threads in Titanium and Titanium Alloys. The Left Hand Slow Spiral makes this series of taps ideal for through hole tapping of right hand threads. The ZELX TI Taps are made from a PM High Speed Steel material to provide increased productivity as well as increased tap life while tapping Titanium. For through hole tapping. Taps have a nitride surface toughening treatment. Bottoming Style (1 to 2 threads chamfered)

Nominal Size

Threads per inch NC NF UNC UNF

No. of Flutes

3616 - Metric Screw Sizes 3626 - Fractional Sizes Pitch Diameter Limit / EDP Numbers H3

—

387001

Length of Thread

Dimensions Length of Neck

Length Overall

—

.236

.326

1-7/8

6 8

32 32

— —

3 3

387606 387007

— —

.276 .276

.411 .474

2 2-1/8

10 10

24 —

— 32

3 3

381608 387010

— —

.354 .276

.521 .599

2-3/8 2-3/8

1/4 1/4

20 —

— 28

3 3

387628 387014

— —

387627 —

.433 .354

.567 .646

2-1/2 2-1/2

5/16 5/16

18 —

— 24

3 3

387695 387016

— —

—

.472 .394

.653 .731

2-23/32 2-23/32

3/8 3/8

16 —

— 24

3 3

387611 387018

— —

—

.551 .394

.699 .856

2-15/16 2-15/16

7/16 7/16

14 —

— 20

3 3

381629 387020

— —

— 387050

.591 .472

— —

3-5/32 3-5/32

1/2 1/2

13 —

— 20

3 3

387021 387023

— —

.630 .472

— —

3-3/8 3-3/8

2015 YAMAWA PRODUCT CATALOG

Nominal Size

TPI NC UNC

NF UNF

No. of Flutes

3616 - Metric Screw Sizes 3626 - Fractional Sizes

Pitch Diameter Limit / EDP Numbers H2

Length of Thread

Dimensions Length of Neck

Length Overall

2 4

56 40

— —

3 3

387623 387601

— —

— 387612

— —

.157 .236

.280 .326

1-3/4 1-7/8

6 8

32 32

— —

3 3

— —

387605 387607

387608 387629

387635 387637

— 387660

— 387667

.276 .276

.411 .474

2 2-1/8

—

387609

—

.354

.521

2-3/8

—

387610

387630

387640

387661

387670

.276

.599

2-3/8

1/4 1/4

20 —

— 28

3 3

— —

387613 387614

— 387631

— 387644

— 387662

— 387674

.433 .354

.567 .646

2-1/2 2-1/2

5/16 5/16

18 —

— 24

3 3

— —

387615 387616

— 387632

— 387646

— 387663

— 387676

.472 .394

.653 .731

2-23/32 2-23/32

3/8 3/8

16 —

— 24

3 3

— —

387617 387618

— 387633

— 387648

— 387664

— 387678

.551 .394

.699 .856

2-15/16 2-15/16

7/16 7/16

14 —

— 20

3 3

— —

387619 387620

— —

— 387650

— —

.591 .472

1/2

—

387621 387622

— —

387626

— —

3-5/32 3-5/32

1/2

— —

.630 .472

— —

3-3/8 3-3/8

2015 YAMAWA PRODUCT CATALOG

ZELX TI Spiral Fluted Taps for Titanium Alloys For Metric Threads For Titanium, Titanium Alloys, Magnesium and Beryllium Copper ZELX TI Slow Spiral Flute Taps have a right hand spiral flute design specifically designed to tap R.H. Threads in Titanium and Titanium Alloys. The Left Hand Slow Spiral makes this series of taps ideal for through hole tapping of right hand threads. The ZELX TI Taps are made from a PM High Speed Steel material to provide increased productivity as well as increased tap life while tapping Titanium. For through hole tapping. Taps have a nitride surface toughening treatment. Modified Bottoming Style (3 to 4 threads chamfered)

Nominal Size

3676 - Metric Screw Sizes

Pitch Diameter Limit / EDP Numbers

No. of Flutes

Length of Thread

Dimensions Length of Neck

Length Overall

M2.5 x 0.45

387700

—

.295

.205

1-13/16

M3 x 0.5 M3.5 x 0.6

3 3

387701 —

— 387702

— —

.197 .276

.428 .411

1-15/16 2

M4 x 0.7 M5 x 0.8 M6 x 1

3 3 3

— — —

387703 387704 —

— — 387705

— — —

.276 .354 .433

.474 .521 .567

2-1/8 2-3/8 2-1/2

M7 x 1 M8 x 1 M8 x 1.25

3 3 3

— — —

387706 387707 387708

— — —

.433 .472 .472

.692 .653 .653

2-23/32 2-23/32 2-23/32

M10 x 1.25 M10 x 1.5

3 3

— —

387709 —

— 387710

.472 .512

.778 .738

2-15/16 2-15-16

M12 x 1.25 M12 x 1.75

3 3

— —

387711 —

—

.551 .591

—— ——

3-3/8 3-3/8

2015 YAMAWA PRODUCT CATALOG

ZELX AL Spiral Pointed Taps for Non-Ferrous Materials for Unified Threads Custom Blended Vanadium High Speed Steel. For Silicon Die Cast, Zinc Die Cast Aluminum and Wrought Aluminum Alloys. Taps have a nitride surface toughening treatment. Plug Style (4 to 5 threads chamfered) DIN tap lengths, ANSI shank dimensions

Threads per Inch Nominal Size

No. of Flutes

3814 - Machine Screw Sizes

Pitch Diameter Limit / EDP Numbers H2

Dimensions

Length of Thread

Length of Neck

Length Overall

UNC

UNF

—

386200

—

.276

.196

1.772

4 5

40 40

— —

2 3

386201 386202

— —

.433 .433

.276 .276

2.205 2.205

6 8

32 32

— —

386203 386204

— —

.512 .512

.275 .315

2.205 2.480

10 10 1/4

24 —

—

3 3

— —

386205 386206

— —

.630 .630

.354 .354

2.756 2.756

— 18 —

—

1/4 5/16

28 —

3 3

— —

386207 386209

— 386211

386208 —

— —

.748 .748

.433 .433

3.150 3.150

3 3

— —

386212 386214

— 386215

386213 —

— —

.866 .866

.512 .512

3.543 3.543

3/8

16 —

— 24

3 3

— —

386216 386218

— 386219

386217 —

— —

.945 .787

.590 .748

3.937 3.543

7/16 7/16

14 —

— 20

3 3

— —

386220 386222

— —

386221 386223

— —

.945 .945

— —

3.937 3.937

1/2 1/2

13 —

— 20

—

386224

—

386225

—

1.142

—

4.331

—

386226

—

386227

—

5/16 3/8

2015 YAMAWA PRODUCT CATALOG

.866

—

3.937

ZELX AL Spiral Pointed Taps for Non-Ferrous Materials for Unified Threads Custom Blended Vanadium High Speed Steel. For Wrought Aluminum Alloys (6061-T6, 7075 type), Copper, Zinc Alloys, Magnesium Alloys. Will also thread deep blind holes in Silicon Die Cast Aluminum > 1-1/2 diameters in depth Taps have a nitride surface toughening treatment. Modified Bottoming Style (2-1/2 to 3 threads chamfered) DIN tap lengths, ANSI shank dimensions

Nominal Size

Threads Per Inch UNC UNF UNJC

2 4 5 6 8

56 40 40

UNJF — — —

No. of Flutes

3701 - Machine Screw Sizes 3711 - Fractional Sizes

Diameter Limit / EDP Numbers H7

Length of Thread

Dimensions Length of Neck

Length Overall

386500

—

.276

.196

1.772

2 3

386501 386502

— —

.433 .433

.276 .276

2.205 2.205

3 3

— —

386503 386504

— —

.512 .512

.275 .315

2.205 2.480

— —

.630 .630

.354 .354

2.756 2.756

10 10

32 32 24 —

3 3

— —

386505 386506

1/4 1/4

20 —

— 28

3 3

— —

386507 386509

— 386511

386508 —

— —

.748 .748

.433 .433

3.150 3.150

5/16 5/16

— 24

3 3

— —

386512 386514

— 386515

386513 —

— —

.866 .866

.512 .512

3.543 3.543

3/8 3/8

18 — 16 —

3 3

— —

386516 386518

— 386519

386517 —

— —

.945 .787

.590 .748

3.937 3.543

7/16 7/16

14 —

— 24 —

3 3

— —

386520 386522

— —

386521 386523

.945 .945

386524 386526

— —

386525 386527

— —

3.937 3.937

— —

1/2 1/2

13 —

— — —

20 — 20

3 3

2015 YAMAWA PRODUCT CATALOG

— —

1.142 .866

— —

4.331 3.937

ZELX AL Spiral Pointed Taps for Non-Ferrous Materials for Metric Threads Custom Blended Vanadium High Speed Steel. For Silicon Die Cast, Zinc Die Cast Aluminum and Wrought Aluminum Alloys. Taps have a nitride surface toughening treatment. Plug Style (4 to 5 threads chamfered) DIN tap lengths, ANSI shank dimensions

Nominal Size

No. of Flutes

3884 - Machine Screw Sizes

Dimensions

Pitch Diameter Limit / EDP Numbers D3

Length of Neck

Length Overall

— 386229

— —

.433 .512

.276 .275

2.205 2.205

386230 386231

— —

.512 .630

.315 .354

2.480 2.756

M3 x 0.5 M3.5 x 0.6

3 3

M4 x 0.7 M5 x 0.8

3 3

— —

M6 x 1 M7 x 1

3 3

— —

386232 386233

— —

.748 .748

.433 .433

3.150 3.150

M8 x 1 M8 x 1.25

3 3

— —

386234 386235

— —

.866 .866

.512 .512

3.543 3.543

M10 x 1.25 M10 x 1.5

3 3

— —

386236 —

— 386237

.945 .945

.590 .590

3.937 3.937

M12 x 1.25 M12 x 1.5 M12 x 1.75

3 3 3

— — —

386238 386239 —

— — 386240

.866 .866 1.142

— — —

3.937 3.937 4.331

2015 YAMAWA PRODUCT CATALOG

386228 —

Length of Thread

ZELX AL Spiral Pointed Taps for Non-Ferrous Materials for Metric Threads For Silicon Die Cast, Zinc Die Cast Aluminum and Wrought Aluminum Alloys. Taps have a nitride surface toughening treatment. Modified Bottoming Style (2-1/2 to 3 threads chamfered) DIN tap lengths, ANSI shank dimensions

Nominal Size

M3 x 0.5 M3.5 x 0.6

3771 - Machine Screw Sizes

Pitch Diameter Limit / EDP Numbers

No. of Flutes

3 3

Dimensions Length of Thread

Length of Neck

Length Overall

386528 —

— 386529

— —

.433 .512

.276 .275

2.205 2.205

—

M4 x 0.7

—

386530

—

.512

.315

2.480

M6 x 1 M8 x 1.25

3 3

— —

386532 386535

— —

.748 .866

.433 .512

3.150 3.543

M10 x 1.25

—

386536

—

.945

.590

3.937

2015 YAMAWA PRODUCT CATALOG

ZELX ALS Spiral Fluted Taps for Non-Ferrous Materials for Unified Threads Custom Blended Vanadium High Speed Steel. For Silicon Die Cast Aluminum Alloys, Soft Plastics and Copper Alloys. 25° Spiral Fluted Taps. ZELX ALS taps are suitable for UNJ Aerospace internal threading applications. Taps have a nitride surface toughening treatment. Modified Bottoming Style (2-1/2 to 3 threads chamfered) DIN tap lengths, ANSI shank dimensions

Threads per inch Nominal Size

UNF

UNJF

2 4 5

56 40 40

— — —

3 3 3

386400 386401 386402

— — —

6 8 10

— — —

3 3

— —

32 32 24 —

1/4 1/4

20 —

32 —

3 3 3

5/16 5/16 3/8

3/8 7/16 7/16 1/2 1/2

28 —

— 16

24 —

— 14 —

24 —

13 —

20 — 20

3804 - Machine Screw Sizes 3834 - Fractional Sizes

Pitch Diameter Limit / EDP Numbers

No. of

UNC UNJC

Flutes

Dimensions Length of

Length of

Length

Thread

Neck

Overall

— — —

.276 .433 .433

.196 .276 .276

1.772 2.205 2.205

386403 386404

— —

.512 .512

.275 .315

2.205 2.480

—

386405

—

.630

.354

2.756

— — —

386406 386407 386409

— — 386411

— 386408 —

— — —

.630 .748 .748

.354 .433 .433

2.756 3.150 3.150

3 3 3

— — —

386412 386414 386416

— 386415 —

386413 — 386417

— — —

.866 .866 .945

.512 .512 .590

3.543 3.543 3.937

3 3 3

— — —

386418 386420 386422

386419 — —

— 386421 386423

—

.787 .945 .945

.748 — —

3.543 3.937 3.937

3 3

— —

386424 386426

— —

386425 386427

—

4.331

2015 YAMAWA PRODUCT CATALOG

1.142 .866

—

3.937

ZELX ALS Spiral Fluted Taps for Non-Ferrous Materials for Metric Threads Custom Blended Vanadium High Speed Steel. For Silicon Die Cast Aluminum Alloys, Soft Plastics and Copper Alloys. 25° Spiral Fluted Taps. ZELX ALS taps are suitable for UNJ Aerospace internal threading applications. Taps have a nitride surface toughening treatment. Modified Bottoming Style (2-1/2 to 3 threads chamfered) DIN tap lengths, ANSI shank dimensions

Nominal Size

No. of Flutes

3804 - Machine Screw Sizes 3834 - Fractional Sizes

Pitch Diameter Limit/EDP Numbers D3

Dimensions D6

Length of Thread

Length of Neck

Length Overall

—

.433

.276

2.205

M3.5 x 0.6

—

386429

—

.512

.275

2.205

M4 x 0.7

—

386430

—

.512

.315

2.480

M5 x 0.8

—

386431

—

.630

.354

2.756

M6 x 1

—

386432

—

.748

.433

3.150

—

386433

—

.748

.433

3.150

M8 x 1 M8 x 1.25

3 3

— —

386434 386435

— —

.866 .866

.512 .512

3.543 3.543

M10 x 1.25 M10 x 1.5

3 3

— —

386436 —

.945 .945

.590 .590

3.937 3.937

M12 x 1.25 M12 x 1.5

3 3

— —

386438 386439

.866 .866

— —

3.937 3.937

M12 x 1.75

—

1.142

—

4.331

2015 YAMAWA PRODUCT CATALOG

—

M3 x 0.5

M7 x 1

386428

—

— 386437 — — 386440

+.005” H11 OVERSIZE SPIRAL FLUTE TAPS Spiral Fluted Taps for Ferrous Materials Oversize taps are +.005” larger than basic pitch diameter (equivalent to an H11). Oversize taps are supplied in the popular bottoming chamfer which is 2 pitches in length. Taps have a TICN surface treatment. Vanadium High Speed Steel Taps Bottoming Style (2-1/2 threads chamfered)

Nominal Size

Threads per inch

Spiral Flute Taps No. of Flutes

1/4

—

5/16

—

5/16

—

3/8

—

3/8

—

1/2

—

1/2

—

5/8 5/8 3/4

— —

—

Fractional Sizes

Pitch Diameter Limit/EDP Numbers SSU04K11-TICN SSU05O11-TICN SSU05M11-TICN SSU06P11-TICN SSU06M11-TICN SSU08R11-TICN SSU08N11-TICN SSU10U11-TICN

Dimensions Length of Thread

Length Overall

.591

3.150

.748

3.543

.748

3.543

.906

3.937

.906

3.937

1.024

4.331

1.024

4.331

1.024

4.331

SSU10O11-TICN

1.024

4.331

SSU12P11-TICN

1.299

4.921

2015 YAMAWA PRODUCT CATALOG

N-RZ ROLL TAPSTaps for Ferrous Materials Thread Forming

HSS

For Unified and Metric threads

Thread Forming Taps for Ferrous Materials for Unified and Metric Threads

YMW

Stainless Steels & Alloy Improved performance, new tap design. Custom Blended Vanadium High Speed Steel. Stainless and (for F e rAlloy r o u sSteels. Taps have an S t e e l sSteels a t e r ia ls ) M oxide coating for improved roll tapping in steels.

Custom Blended Vanadium High Speed Steel Plug Style (3 to 5 threads chamfered) L is tap t lengths, 3 5 6 0 ANSIM achine Screw sizes DIN shank dimensions

3565

Fractional sizes

4 4

5 5

6 6

8 8

10 10

12 12

1/4 1/4

5/16 5/16

3/8 3/8

7/16 7/16

3560 - Machine Sizes PlugScrew Style (3 to 5 threads chamfered) I m p rSizes o v e d p e r f o r m a n c e , n e w t a p d e s ig n 3565 - Fractional

Pitch Diameter Limit / EDP Numbers

Threads per Inch Nominal UNC Size UNJC

D I N t a p le n g t h s , ANSI s h a n k d i m e n s i o n s

UNF UNJF

T a p s h a v e a n o x id e c o a tin g f o r im p r o v e d r o ll t a p p i n g in s t e e l s

No. of Lobe Grooves

Dimensions

Length of Thread

Length of Neck

Length Overall

— —

389427

— —

389424 389428

— —

0 0

.433 .433

.276 .276

2.205 2.205

— —

389431 389435

— —

389432 389436

— —

4 4

.433 .433

.276 .276

2.205 2.205

— —

389440 389444

— —

389441 389445

— —

4 4

.512 .512

.276 .276

2.205 2.205

— —

389448 389452

— —

389449 389453

— —

4 4

.512 .512

.315 .315

2.480 2.480

— —

389456 389460

— —

389457 389461

— —

4 4

.630 .630

.354 .354

2.756 2.756

— —

389464 389468

— —

389465 389469

— —

4 4

.630 .630

.354 .354

3.150 3.150

— —

389476

— —

389473 389477

— —

4 4

.748 .748

.433 .433

3.150 3.150

— —

389480 389484

— —

389481 389485

3 3

.866 .866

.512 .512

3.543 3.543

— —

389488 389492

— —

389489 389493

3 3

.945 .787

.597 .748

3.937 3.543

— —

389496

— —

389497

4 4

.945 .945

— —

3.937 3.937

2015 YAMAWA PRODUCT CATALOG

2014-8

N-RZ ROLL TAPS Thread Forming Taps for Ferrous Materials for Unified and Metric Threads Improved performance, new tap design. Custom Blended Vanadium High Speed Steel. Stainless Steels and Alloy Steels. HSS OX 2 tapping Taps have an oxide coating for improved roll tapping in steels. N-RZ Roll taps can be run 1.5 times faster4than the speeds recommended for thread cutting taps. Bottoming Style (2 to 2-1/2 threads chamfered) DIN shankScrew dimensions Listtap lengths, 3560 USCTI Machine sizes 3565

UNC UNJC

0 1 2

80 72

4 5 6 8 10 12 1/4 5/16 3/8 7/16 7/16

—

.315

—

1.575

—

.315

—

1.575

—

.315

—

1.575

—

.354

—

1.772

389415

389416

—

.354

—

1.772

389417

389418

—

.276

.217

1.969

389419

389420

—

.276

.217

1.969

—

389422

—

.433

.276

2.205

—

389425

—

389426

—

.433

.276

2.205

—

389429

—

389430

—

.433

.276

2.205

—

389433

—

389434

—

.433

.276

2.205

—

389437

—

389438

—

.512

.276

2.205

—

389442

—

389443

—

.512

.276

2.205

—

389446

—

389447

—

.512

.315

2.480

—

389450

—

389451

—

.512

.315

2.480

—

389454

—

389455

—

.630

.354

2.756

—

389458

—

389459

—

.630

.354

2.756

—

389462

—

389463

—

.630

.354

3.150

—

389467

—

.630

.354

3.150

—

389470

—

389471

—

.748

.433

3.150

—

389474

—

389475

—

.748

.433

3.150

—

389478

—

389479

.866

.512

3.543

—

389482

—

389483

.866

.512

3.543

—

389487

.945

.597

3.937

—

389490

—

389491

.787

.748

3.543

—

389494

—

389495

.945

—

3.937

—

389498

—

389499

.945

—

3.937

24 32 24 20 18 24 16

3/8

—

5/16

—

1/4

—

389411

—

389410

—

Overall

—

Neck

Length

Grooves

Thread

Length of

—

Length of

389414

No. of Lube

389412

Dimensions

Pitch Diameter Limit / EDP Numbers

389413

2 3

UNF UNJF

Fractional sizes

Threads per Inch Nominal Size

Bottoming Style (2 to 2-1/2 threads chamfered) 3560 - Machine Screw Sizesnew tap design Improved performance, DIN tap lengths, USCTI shank dimensions 3565 - Fractional Sizes Taps have an oxide coating for improved roll tapping in steels Replaces #3510 and #3520 Roll Tap styles

24 14 20

N-RZ Roll taps can be run 1.5 times faster than the tapping speeds recommended for thread cutting taps.

2015 YAMAWA PRODUCT CATALOG

N-RZ METRIC ROLL TAPS

N-RS ROLL TAPS Thread Forming Taps for Non-Ferrous Materials for Unified Threads Improved performance, new tap design. For Aluminums, Brass, Copper Alloys (Non-Ferrous Materials). Taps have a nitride surface toughening treatment. N-RS Roll taps can be run 1.5 times faster than the tapping speeds recommended for thread cutting taps. Bottoming Style (2 to 2-1/2 threads chamfered) DIN tap lengths, ANSI shank dimensions

Threads per Inch Nominal UNC UNF Size UNJC UNJF 1 1

2 2

3 3

4 4

5 5

6 6

8 8

10 10

12 12

1/4 1/4

5/16 5/16

3/8 3/8

7/16 7/16

1/2 1/2

3550 - Machine Screw Sizes 3552 - Fractional Sizes

Pitch Diameter Limit/EDP Numbers H2

No. of Lobe Grooves

Dimensions Length of Thread

Length of Neck

Length Overall

388411 388412

— —

0 0

.315 .315

— —

1.575 1.575

388413 388415

388414 388416

— —

0 0

.354 .354

— —

1.772 1.772

388417 388419

388418 388420

— —

0 0

.276 .276

.217 .217

1.969 1.969

— —

388421 388425

— —

388422 388426

— —

0 0

.433 .433

.276 .276

2.205 2.205

— —

388429 388433

— —

388430 388434

— —

1 1

.433 .433

.276 .276

2.205 2.205

— —

388437 388442

— —

388438 388443

— —

1 1

.512 .512

.276 .276

2.205 2.205

— —

388446 388450

— —

388451

— —

1 1

.512 .512

.315 .315

2.480 2.480

— —

388454 388458

— —

388455 388459

— —

1 1

.630 .630

.354 .354

2.756 2.756

— —

388462 388466

— —

388463 388467

— —

1 1

.630 .630

.354 .354

3.150 3.150

— —

388470 388474

— —

388471 388475

— —

1 1

.748 .748

.433 .433

3.150 3.150

— —

388478 388482

— —

388479 388483

1 1

.866 .866

.512 .512

3.543 3.543

— —

388486 388490

— —

388487 388491

1 1

.945 .787

.591 .748

3.937 3.543

— —

388494 388498

— —

388495 388499

1 1

.945 .945

— —

3.937 3.937

— —

388504 388508

— —

388505 388509

1 1

1.142 .866

— —

4.331 3.937

2015 YAMAWA PRODUCT CATALOG

N-RS ROLL TAPS Thread Forming Taps for Non-Ferrous Materials for Unified Threads Improved performance, new tap design. For Aluminums, Brass, Copper Alloys (Non-Ferrous Materials). Taps have a nitride surface toughening treatment. Custom Blended Vanadium High Speed Steel. Plug Style (3 to 5 threads chamfered) DIN tap lengths, ANSI shank dimensions

Threads per Inch Nominal UNC UNF Size UNJC UNJF 4 4

5 5

6 6

8 8

10 10

12 12

1/4 1/4

5/16 5/16

3/8 3/8

7/16 7/16

1/2 1/2

3550 - Machine Screw Sizes 3552 - Fractional Sizes

Pitch Diameter Limit/EDP Numbers H2

No. of Lobe Grooves

Dimensions Length of Thread

Length of Neck

Length Overall

— —

388423 388427

— —

388424 388428

— —

0 0

.433 .433

.276 .276

2.205 2.205

— —

388431 388435

— —

388432 388436

— —

1 1

.433 .433

.276 .276

2.205 2.205

— —

388440 388444

— —

388441 388445

— —

1 1

.512 .512

.276 .276

2.205 2.205

— —

388448 388452

— —

388449 388453

— —

1 1

.512 .512

.315 .315

2.480 2.480

— —

388456 388460

— —

388457

— —

1 1

.630 .630

.354 .354

2.756 2.756

— —

388464 388468

— —

388465 388469

— —

1 1

.630 .630

.354 .354

3.150 3.150

— —

388472 388476

— —

388473 388477

— —

1 1

.748 .748

.433 .433

3.150 3.150

— —

388480 388484

— —

388481 388485

1 1

.866 .866

.512 .512

3.543 3.543

— —

388488 388492

— —

388489 388493

1 1

.945 .787

.590 .748

3.937 3.543

— —

388496 388502

— —

388497 388503

1 1

.945 .945

— —

3.937 3.937

— —

388506 388510

— —

388507 388511

1 1

1.142 .866

— —

4.331 3.937

2015 YAMAWA PRODUCT CATALOG

N-RS METRIC ROLL TAPS Thread Forming Taps for Non-Ferrous Materials for Metric Threads Improved performance, new tap design. For Aluminums, Brass, Copper Alloys (Non-Ferrous Materials). Taps have a nitride surface toughening treatment. N-RS Roll taps can be run 1.5 times faster than the tapping speeds recommended for thread cutting taps. Plug Style (3 to 5 threads chamfered) Bottoming Style (2 to 2-1/2 threads chamfered) DIN tap lengths, ANSI shank dimensions

Nominal Size

3750 - Metric

EDP Numbers

Ground Thread Limits

Plug

Bottoming

No. of Lobe Grooves

Dimensions Length of Thread

Length of Neck

Length Overall

M3 x 0.5

388513

388512

.433

.276

M3.5 x 0.6

388515

388514

.512

.276

2.205

M4 x 0.7 M5 x 0.8

D6 D7

388517 388519

388516 388518

1 1

.512 .630

.315 .354

2.480 2.756

M6 x 1 M7 x 1

D8 D9

388521 388523

388520 388522

1 1

.748 .748

.433 .433

3.150 3.150

M8 x 1 M8 x 1.25

D9 D9

388525 388527

388524 388526

1 1

.866 .866

.512 .512

3.543 3.543

M10 x 1.25 M10 x 1.5

D9 D10

388529 388531

388528 388530

1 1

.945 .945

.591 .591

3.937 3.937

M12 x 1.25

388533

388532

.866

—

3.937

M12 x 1.75

D11

388535

388534

1.142

—

4.331

2015 YAMAWA PRODUCT CATALOG

2.205

3502 3512

M a c h in e S c r e w F s irzaecst i o n a l s i z e s

H 4

TiCN

High Performance Thread Forming Taps

HSS-P

For Unified threads YMW

D I N ta p le n g th s, ANSI sh a n k d im e n s io n s T a p s h a v e T iC N c o a t in g f o r t a p p in g w it h c o o la n t H P - R Z R o ll ta p s c a n b e r u n 2 tim e s fa ste r th a n

ZELX HP-RZ Roll Taps

th e ta p p in g sp e e d s re c o m m e n d e d fo r th re a d

c u ttin g t a p s.

High Performance Thread Forming Taps for Unified Threads

the tapping speeds recommended for thread cutting

Pitch Diameter Limit / EDP Numbers

Threads per inch Nominal UNC UNF Size UNJC UNJF

Dimensions

of Lobe Taps have TiCN coating for tapping with coolant HP-RZ Roll taps can be run 2 timestaps. fasterNo. than the tapping recommended for Grooves Length ofspeeds Length of Length H2 H3 H4 H5 H6 H7 Neck Overall thread cutting taps. PM high speed steel. For Stainless, Low, Medium, High Carbon Steels < 35 HRC. Thread 1/2

—

1/2

—

Plug Style (3 to 5 threads chamfered) DIN tap lengths, ANSI shank dimensions UNC

Threads per inch Nominal UNF Size UNJC UNJF

L is t1/2 1/2

3 5 13 02 3 5—1 2

386862

—

386859

1.142

—

4.331

—

386863

.866

—

3.937

3502 - Machine Screw Sizes 3512 - Fractional Sizes

Pitch Diameter Limit / EDP Numbers H2

M a c h in e— S c r e w — — sFirzaecst i o n a l s i z e s 20 — —

— —

386862

HIGH PERFORMANCE ROLL Bottoming Style (2 to 2-1/2 threads chamfered) TAPS DIN tap lengths, ANSI shank dimensions YMW Threads per Inch

No. of Lobe Grooves

Thread

UNC

UNF

Size

UNJC

UNJF

—

386800

4 6

40 32

— —

—

1/4

—

1/2

—

H3 —

Length

Neck

Overall

—

386859

1.142

—

4.331

386863

.866

—

3.937

P S

T a p s h a v e T iC N c o a tin g f o r t a p p in g w it h

c o o la n t H P - R Z R o ll ta p s c a n b e r u n 2 3502 - Machine Screw t im eSizes s fa ste r th a n th e ta p p in g s p e e d s r e c o m m e n d e d fo r th re a d c u ttin g t a p s. 3512 - Fractional Sizes

D I N ta p le n g th s, ANSI sh a n k d im e n s io n s B o t t o m in g S t y le ( 2 t o 2 - 1 /2 t h r e a d s c h a m fe r e d ) No. of Lobe Grooves

—

— —

386805 386809

386820

—

H6 — — —

— —

Length of

—

Pitch Diameter Limit / EDP Numbers

Nominal

Dimensions Length of

386860

H7 —

Dimensions Length of Length of Length Thread Neck Overall

.315

—

1.575

— —

0 2

.433 .512

.276 .276

2.205 2.205 2.756

—

.630

.354

386825

—

.748

.433

3.150

—

386861

.866

—

3.937

M etric high perform ance roll taps on follow in g page

2014-8

2015 YAMAWA PRODUCT CATALOG

ZELX HP-RZ High Performance Thread Forming Taps for Metric Threads Taps have TiCN coating for tapping with coolant. Plug Style (3 to 5 threads chamfered) Bottoming Style (1 to 2 threads chamfered) DIN tap lengths, ANSI shank dimensions

Nominal Size

Ground Thread Limits

3572 - Metric Sizes

EDP Numbers Plug

Bottoming

No. of Lobe Grooves

Dimensions Length of Thread

Length of Neck

Length Overall

M3 x 0.5 M3.5 x 0.6

D5 D6

386885 386886

386864 386865

2 2

.433 .512

.276 .275

2.205 2.205

M4 x 0.7 M5 x 0.8

D6 D7

386887 386888

386866 386867

2 2

.512 .630

.315 .354

2.480 2.756

M6 x 1 M7 x 1

D8 D9

386889 386870

386868 386869

2 2

.748 .748

.433 .433

3.150 3.150

M8 x 1 M8 x 1.25

D9 D9

386872 386874

386871 386873

3 3

.866 .866

.512 .512

3.543 3.543

M10 x 1.25 M10 x 1.5

D9 D10

386876 386878

386875 386877

4 4

.945 .945

.590 .590

3.937 3.937

M12 x 1.25 M12 x 1.5

D9 D9

386879 386881

4 4

.866 .866

— —

3.937 3.937

M12 x 1.75

D11

386883

1.142

—

4.331

386884

2015 YAMAWA PRODUCT CATALOG

HSS

2 .5

Taper Pipe Taps â&#x20AC;&#x201C; General Purpo

NPT TAPER PIPE TAPS

NPT

General Purpose

G ro u n d th re a d ta p e r p ip e ta p s a re sta n d a rd in A m e r ic a n S t a n d a r d P ip e F o r m ( N P T ) .

NPT Taper Pipe Taps. These general purpose taper pipe taps are ideal for threading a wide variety of materials, such as steels and irons, and can also be used for nonferrous and nonmetallic materials. Ground thread taper pipe taps are standard in American T h e n o m in a l s iz e o f a p ip e t a p is t h a t o f t h e p ip e fittin g to b ePipe ta pForm p e d ,(NPT). n o t Custom th e a c tu a l s iz eVanadium o f th e High ta p . Speed Steel. The nominal size of a pipe tap is that of the pipe fitting to Standard Blended Custom Blended Vanadium High Speed Steel T h e t h re a d t a p e rs 3 /4 o f a n in c h p e r fo o t. be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. Taps have an oxide surface treatment. r f a c e tre a tm e n t All pipes have a chamfer of 2-1/2 to 3-1/2 threads T a p s h a v e o x id e s u3430 - NPT NPT L ist A ll p ip e t a p s h a v e a c h a m f e r o f 2 - 1 /2 ANP 343 T ANPT 0

Nominal Size

Threads per Inch

No. of Flutes

EDP Numbers NPT or ANPT

Length

Dimensions Length

of Thread

Overall

1/16

383100

11/16

2-1/8

1/8 (Lg. Shank)

383101

3/4

2-1/8

1/8 (Sm. Shank)

383102

3/4

2-1/8

1/4

383103

3/8

383104

1-1/16 1-1/16

2-7/16 2-9/16

1/2

383105

3/4

383106

1-3/8 1-3/8

3-1/8 3-1/4

11-1/2

383107

1-3/4

3-3/4

1-1/4

11-1/2

383108

1-1/2

11-1/2

383109

11-1/2

383110

1-3/4 1-3/4 1-3/4

t o 3 1 /2 t h re a d s

4 4-1/4 4-1/2

Troubleshooting Troubleshooting

Problem Chipping

Problem

Causes

Solutions

Excessive Tapping Speed Misalignment Hole Size is too Small Poor Tapping Fluid

Increase Tapping Speed to 15-18 SFM Adjust or Use Radial Float Tapping Head 4-1/ 3-3/ 4 4 Check Hole Size Use a Heavy Duty Lubricant

Causes

Poor Finish (Chatter Mark)

Excessive Tapping Speed Excessive Hook Angle Poor Tapping Fluid

Stop Mark

Excessive Tapping Speed Poor Tapping Head Poor Setup

2015 YAMAWA PRODUCT CATALOG

Solutions

Reduce Tapping Speed to 10-15 SFM Adjust Hook Angle During Regrind Use Cutting Oil or Tapping Lubricant Reduce Tapping Speed to 10-15 SFM Use Floating Tapping Head Use Special Design Taps or Thread Mill

Use special Design Taps or Thread Mill.

HSS

terrupted T aper Pipe T aps â&#x20AC;&#x201C; G eneral Purpose

2 .5

A m e r ic a n T a p e r P i p e T h r e a d s

th e ta p c h a m fe r a n d fo r th e first fe w th re a d s. b a la n c e o f th e th re a d s a re in te rru p te d to re d u d r a g w h ile th re a d in g . T h e s e p ip e t a p s a r e s t a n d a r d h a v in g a n o d d n u m b e r o f flu te s, 5 o r

NPT INTERRUPTED TAPER PIPE TAPS

General Purpose -HFor tom Blended Vanadium ighAmerican Taper Pipe Threads ed Steel

G ro u n d th re a d ta p e r p ip e ta p s a re sta n d a rd in A m e r ic a n S t a n d a r d P ip e F o r m ( N P T ) .

T h e n o m in a l s iz e o f a p ip e t a p is t h a t o f t h e p fittin g to b e ta p p e d , n o t th e a c tu a l siz e o f th e T h e t h r e a d t a p e r s 3 / 4 o f a n in c h p e r fo o t.

The balance of the threads are interrupted to reduce drag while threading. These pipe taps are standard having an odd number of T a p s Pipe h a vForm e o (NPT). x id e Custom s u r f a cBlended e tre a tm e n tHigh flutes, 5 or 7. Ground thread taper pipe taps are standard in American Standard Vanadium A ll p ip e a p sactual h a vsize e aofcthe h atap. m f The er o f 2 -tapers 1 /2 t3/4 o 3 - 1 /2 t Speed Steel. The nominal size of a pipe tap is that of the pipe fitting to be tapped, nott the thread of an inch per foot. Taps have oxide surface treatment All pipes have a chamfer of 2-1/2 to 3-1/2 threads

u p te d N P Nominal Size

Threads per Inch

No. of Flutes

EDP Numbers

NPT or ANPT

3435 - Interrupted NPT Dimensions Length of Thread

Length Overall

1/8 (Lg. Shank) 1/8 (Sm. Shank)

27 27

5 5

383151 383152

3/4 3/4

1/4

383153

1-1/16

2-1/8 2-1/8 2-7/16

3/8

383154

1-1/16

2-9/16

1/2

383155

3-1/8 3-3/4

383156

1-3/8 1-3/8

11-1/2

383157

1-3/4

1-1/4

11-1/2

383158

1-3/4

383159

1-3/4

4-1/4

383160

1-3/4

4-1/2

3/4

1-1/2

11-1/2

5 7

11-1/2

2015 YAMAWA PRODUCT CATALOG

3-1/4

HSS

2. 5

Taper Pipe Taps For Cast Iron F o r A m e r ic a n T a p e r P ip e T h r e a d s

T h e s e t a p s h a v e a g e o m e t r y s u it e d f o r t a p p in g g r a y iro n s a n d iro n s th a t p ro d u c e b ro k e n c h ip s. T h is d e s ig n is a lso a p p ro p ria te fo r so m e n o n m e ta llic s s u c h a s B a k e lite a n d C a s t B r a s s .

NPT/NPTF

Taper Pipe Taps For Cast Iron for American Taper Pipe Threads Custom Blended Vanadium High Speed Steel

These taps have a geometry suited for tapping gray irons and irons that produce broken chips. This design is also appropriate for S t r a ig h t flu te some non-metallics such as Bakelite and Cast Brass. Custom Blended Vanadium High Speed Steel. Straight L ist Flute. 3 4Taps 3 7 have NaP T (2 - 1 /2 t o 3 - 1 /2 t h r e a d s c h a m fe r e d ) 3447 NPTF surface toughening treatment. T a p s h a v e a s u r f a c e t o u g h e n in g t a p t re a tm e n t Nominal Size

Threads per Inch

EDP Numbers

No. of Flutes

NPT

Dimensions NPTF

Length of Thread

D ry se

Length Overall

1/8 (Lg. Shank) 1/8 (Sm. Shank)

27 27

4 4

383201 383202

383226 383227

3/4 3/4

2-1/8 2-1/8

1/4 3/8

18 18

4 4

383203 383204

383228 383229

1-1/16 1-1/16

2-7/16 2-9/16

1/2 3/4

14 14

4 5

383230 383231

1-3/8 1-3/8

3-1/8 3-1/4

1 1-1/4

11-1/2 11-1/2

5 5

383208

383232 383233

1-3/4 1-3/4

3-3/4 4

1-1/2 2

11-1/2 11-1/2

7 7

383209 383210

383234 383235

1-3/4 1-3/4

4-1/4 4-1/2

2014-8 2015 YAMAWA PRODUCT CATALOG

89 71

ZELX MOLD NPT Taper Pipe Taps for Mold Steels for American Taper Pipe Threads First Choice For Tapping Mold Steels. Ideal for tapping mold steels, tool steels and gray cast irons. (35 to 45 HRC). YMW offers this series of ZELX Mold Taps made of Cobalt High Speed Steel. Pipe Taps are standard with 2-1/2 to 3-1/2 threads chamfered

Nominal Size

Threads per Inch

Number of flutes

1/8 (Lg. Shank)

1/4 3/8

3434 NPT - Straight Flute Style

EDP Numbers

Dimensions

NPT

Length of Thread

Length Overall

389641

3/4

2-1/8

389643

1-1/16

2-7/16

389644

1-1/16

2-9/16

2015 YAMAWA PRODUCT CATALOG

Taper Pipe Taps â&#x20AC;&#x201C; General Purpose

HSS

For American Taper Pipe Dryseal Threads YMW

NPTF Taper Pipe Taps for American Taper Pipe Dryseal Threads - General Purpose Taps have an oxide surface treatment. All pipe taps have L ist 3 4 4a 0chamfer of 2-1/2 to 3-1/2 threads NPTF

T a p s h a v e o x id e s u r f a c e tre a tm e n t 3440 - NPTF A ll p ip e t a p s h a v e a c h a m f e r o f 2 - 1 /2 t o 3 - 1 /2 th re a d s

Threads per Inch

No. of Flutes

EDP Numbers

1/16

383125

1/8 (Lg. Shank)

1/8 (Sm. Shank)

3/8 1/2

Nominal Size

NPTF

Dimensions Length of Thread

Length Overall 2-1/8

383126

11/16 3/4

383127

3/4

2-1/8

383129

1-1/16

2-9/16

383130

3-1/8 3-1/4

2-1/8

383131

1-3/8 1-3/8

11-1/2

383132

1-3/4

1-1/4

11-1/2

383133

1-3/4

1-1/2 2

11-1/2 11-1/2

7 7

383134 383135

1-3/4 1-3/4

4-1/4 4-1/2

3/4

2015 YAMAWA PRODUCT CATALOG

3-3/4

NPS Straight Pipe Taps for American Straight Pipe Threads - General Purpose Taps have an oxide surface treatment. All pipe taps have a chamfer of 2-1/2 to 3-1/2 threads Modified Style (3-5 threads chamfered)

Dimensions

EDP Numbers

Nominal Size

Threads per Inch

No. of Flutes

NPS

Length of Thread

Length Overall

1/8 (Lg. Shank)

383301

3/4

2-1/8

1/8 (Sm. Shank)

383302

3/4

2-1/8

3/8

383304

1-1/16

2-9/16

1/2

383305

1-3/8

3-1/8

3/4

383306

1-3/8

3-1/4

2015 YAMAWA PRODUCT CATALOG

NPSF Straight Pipe Taps for American Straight Pipe Threads - General Purpose Taps have an oxide surface treatment. All pipe taps have a chamfer of 2-1/2 to 3-1/2 threads Modified Style (3-5 threads chamfered)

Â Nominal Size

Threads per Inch

3460 - NPSF Dryseal

EDP Numbers No. of Flutes

NPSF

1/8 (Lg. Shank)

383326

1/8 (Sm. Shank)

Dimensions Length of

Length

Thread

Overall

383327

3/4 3/4

1/4 3/8

18 18

4 4

383328 383329

1-1/16 1-1/16

2-7/16 2-9/16

1/2

14 14

383330

1-3/8

3-1/8

5 5

383331 383332

1-3/8

3-1/4 3-3/4

3/4 1

11-1/2

2015 YAMAWA PRODUCT CATALOG

1-3/4

2-1/8 2-1/8