The Best Central Lighting Inverter– Power Ride 3 Battery backup power system supplies and switches between the main power and a battery. It is usually used to provide emergency lighting when there is a failure in the power system. It is equipped with uninterrupted coupling the turbine gas in order to supply power network. Why do we need a backup power? Because, sometimes, the electric power supplied by the local utility can be suddenly disconnected due to a black out. The battery backup can maintain the power to be restored until the equipment can be properly turned off.
Features and Specification Here are the features and specification of a backup power system, so you do not have to worry about the black out: 1. 2. 3. 4. 5. 6.
Power rating: 8 to 50 KW Input voltage:20% to +15% Output voltage: 208Y/120 or 480Y/277 VAC Efficiency: 94% online, 98% standby, and fast transfer in under 1 minute Crest factor: 3 to 1 in typical condition Surge protection: It will protect itself and the load against surge. It is defined as ANSI/IEEE C62.41 Categories A and B. 7. Isolation: It is completed from the line where the output is bounded neutrally to the ground. 8. Battery: sealed and maintenance free of AGM battery All of these features and specifications make the emergency battery backup system survives at 95% humidity with no condensation at 0 degrees to 40 degrees operating temperature. Where to buy a three phase central lighting inverter? For detailed information about the power ride 3, the battery backup power system, you can visit the page http://www.perfectpowersystems.com/powerride3.html. Not only detail information about the product’s features and specification, it also provides you with downloadable documents such as technical drawing, manual book, and lock-in specification so that you can decide whether the product is suitable for your needs. SOURCE URL: http://bit.ly/2gAtaEF