JOIN THE TWO JACKET TOGETHER

- Starting from the vent attach the lining to the jacket right side to right side

- Stitch the lining hem of the n.11 with the hem of the jacket 1 cm, fold and stitch along the vent, stitch the other side hem (the n.10) with the hem of the jacket 1 cm, fold and stitch from the notch till the hem leaving a fold, stitch together the upper part

- Stitch right side to right side, all the hem from the vent till the round part 1 cm

- Fix this seam allowance with cross stitch

- Close the jacket on the collar starting knotting together the 2 meting point of the collar to the lapel, excluding the seam allowance, stitch the collar 1 cm starting from one of this 2 point till the other one, excluding again the seam allowance, restarting from this point sewing all the lapel with same 1 cm of seam allowance, repete on the other side

- Open the two stitches of the two collar with the back of the jacket and stitch together at 0,5 cm

- Close al the perimeter and use the escape stitch on the left sleeve to turn the jacket

- Stitch the sleeve ham

- Stitch all the bottom hole and the bottom

- Hand-stitch a long and flat stitch all around to keep the hem in place

- Iron all well and flat.