1 PERSONAL PROTECTIVE EQUIPMENT
2020 30.10.2019
PROTECT YOUR LIFE USE IMAGINATION
Safety
“Working at a height may expose workers to a high risk of injuries or death following a fall or other serious accident. Accidents related to working at a height constitute to a large part of all accidents during work – particularly fatal accidents. Annually in Poland there occurs about 5,000 accidents resulting from fall from a height, in which 150 people suffer fatalities or serious injuries.”
(Source: Central Statistical Office of Poland — data as for 2005)
6
0
“Working at a height may expose workers to a high risk of injuries or death following a fall or other serious accident. Accidents related to working at a height constitute to a large part of all accidents during work – particularly fatal accidents. Annually in Poland there occurs about 5,000 accidents resulting from fall from a height, in which 150 people suffer fatalities or serious injuries.”
EQUIPMENT PREPARATION
WORK ORGANIZATION
SAFETY STANDARDS
If possible, work should be organized so that all employees are not exposed to falls from the height. However, if risk of a fall cannot be totally eliminated, in order to provide the best possible working conditions it is required to choose proper protection method and necessary protection equipment. Then as a rule, priority should be given to the collective protection equipment (balustrades, safety nets) over the individual.
Being defined as Personal Protection Equipment (PPE), the fall protection equipment shall meet the requirements of relevant harmonised European Standards (EN). All fall protection products shall bear CE marking including but not limited to reference European standard number.
In order to make a proper selection of equipment the character of the work should be taken into consideration. When selecting and using proper fall protection equipment specialist training and medical examination should be provided. Moreover the employer is obliged to ensure specific organization of works at the height and supervision of the tasks being performed and whether the safety rules in the course of the works are respected. Personal fall protection equipment is subject to periodic inspections carried out by qualified personnel. Periodic inspections do not release users from checking the equipment before each use.
WWW.PROTEKT.COM.PL
Safety standards
EN 353-1
Personal fall protection equipment. Guided type fall arresters including an anchor line. Guided type fall arresters including a rigid anchor line
EN 353-2
Personal protective equipment against falls from a height. Guided type fall arresters including a flexible anchor line
EN 354
Personal fall protection equipment. Lanyards
EN 355
Personal protective equipment against falls from a height. Energy absorbers
EN 358
Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards
EN 360
Personal protective equipment against falls from a height. Retractable type fall arresters
EN 361
Personal protective equipment against falls from a height. Full body harnesses
EN 362
Personal protective equipment against falls from a height. Connectors
EN 363
Personal fall protection equipment. Personal fall protection systems
EN 795-A1
Anchor devices. Anchor points placed on vertical, horizontal or inclined surfaces (devices of this class are not personal protective equipment (PPE))
EN 795-A2
Anchor devices. Anchor points placed on inclined walls (devices of this class are not personal protective equipment (PPE)).
EN 795-B
Anchor devices. Anchor devices with anchor point(s) without the need to fix them into the structure (temporary, transportable anchor devices)
EN 795-C
Anchor devices. Anchor device with a flexible anchor line which deviates from the horizontal by not more than 15° (devices of this class are not personal protective equipment (PPE))
EN 795-D
Anchor devices. Anchor device with a rigid anchor line which deviates from the horizontal by not more than 15° (devices of this class are not personal protective equipment (PPE))
EN 813
Personal fall protection equipment. Sit harnesses
EN 1496
Personal fall protection equipment. Rescue lifting devices
EN 1497
Personal fall protection equipment. Rescue harnesses
0
7
1 2
FALL PROTECTION KITS Kits for work at heights Fall protection kits for work on steep roof Confined descent kits
FULL BODY HARNESSES, PROTECTIVE CLOTHING
Full body harness Heat-resistant full body harness Hi Vision full body harness Overalls with full body harness SOFTSHELL jackets Harness with vest Protective vests
3 4
ENERGY ABSORBERS AND LANYARDS AW 170 energy absorbers with lanyard ABM energy absorbers with lanyard ABM SCF energy absorbers with lanyard for work on scaffolds Lanyards
GUIDED TYPE AND RETRACTABLE TYPE FALL ARRESTERS Guided type fall arresters Guards for guided type fall arresters Roof lanyard Retractable type fall arresters
5
CONNECTORS
6
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
Detachable connectors Integrated connectors Screw link connectors
Industrial safety helmets Face shields and ear protectors Bump caps
7 8
0
LINES Working lines Work positioning lanyard
WWW.PROTEKT.COM.PL
8
LINE EDGE GUARDS AND LINE SLEEVES
15
Screens Ground tents Safety barriers Protection netting Warning signs
Line edge guard Line sleeves
9
WORKING ROPE INSTALLATION EQUIPMENT Insulating telescopic poles Heads and working hooks Cable clamps for cable installers
10
WORK POSITIONING BELTS AND DEVICES Work positioning belts Work positioning devices Work positioning webbing lanyards
11 12
POLE CLIMBERS AND TREE CLIMBING SPIKES
GROUND TENTS, SCREENS AND SAFETY BARRIERS
16
ADDITIONAL ACCESSORIES Bosun’s chairs Climbing Tool lanyards Tool holders Cargo bags Cargo cases and boxes Covers Straps for heavy load handling Line throwing weights Tree climbing carts Paints and applicators Fans
Pole climbers Spare parts for pole climbers Tree climbing spikes Spare parts for tree climbing spikes
ANCHOR POINTS AND DEVICES Anchor points Anchor devices Horizontal anchor lanyards and lines Webbing slings and portable anchor points Anchor systems and devices
13
LADDERS, SCAFFOLDS AND PLATFORMS Rope ladders Telescopic ladders Double-sided and combined ladders Scaffolds Mobile platforms
14
LIFTING AND DESCENDING DEVICES Descending devices Lifting and descending device Pulleys and pulley blocks
0
9
6 Section
10 Section
2
2
EN 397
Industrial safety helmet
EN 358
Work positioning device
EN 361, EN 358
Section
1
EN 795 CLASS D
3
Full body harness
EN 354, EN 355
Section
4
EN 360
Section
12 Section
Energy absorber with lanyard
Guided type fall arrester
EN 795 TYP B Webbing sling
12 Section
2 EN 353-1
3 Section
12
EN 354, EN 355
Section
Energy absorber with lanyard
4
2
Anchor point
EN 795 TYP B
Horizontal anchor line
EN 360
Section
dział
EN 795 TYP A
Guided type fall arrester
EN 361
Full body harness
17 Section
2
EN 354
Rescue lifting sling
EN 795 CLASS C
13 Section
EN 1496 KLASA B
Rescue lifting device
2 Section
EN 361, EN 1497 Full body harness
2 EN 795 CLASS C
3 Section
2 Section
4 Section
13 Section
EN 361, EN 358, EN 813 Full body harness
EN 353-2
Retractable type fall arrester
EN 795 TYP B Safety tripod
EN 354, EN 355
Energy absorber with twin-tail lanyard
12 Section
EN 795 TYP B Webbing sling
10 Section
12 Section
EN 358
Work positioning device
EN 795 TYP B Anchor beam
Fall protection kits 1-3
Kits for work at heights Fall protection kits for work on steep roof
1 - 21
Confined descent kits
1 - 24
1
FALL PROTECTION KITS
1
BASIC
BASIC 2
VG11 11.074
for use in the vertical where fall over the edge can occur
R 0,5 mm
for profile of r 0.5mm radius without sharp edgesi
ABM + LB 101
energy absorber ABM with lanyard LB 101, 2m long + 2 x AZ 011
Full body harness
P 30
ABM + LB 100
Full body harness
energy absorber ABM with lanyard LB 100 + 2 x AZ 0111
CARGO BAG T2
CARGO BAG T2
THE KIT COMPRISES:
THE KIT COMPRISES:
• • •
•
• full body harness P 01 with dorsal attachment point, size M-XL or XXL energy absorber ABM with lanyard LB 101, 2m long and steel connectors AZ 011 cargo bag, dimensions 31 x 27 x 10cm
•
ATTACHMENT POINTS
1 dorsal
USE:
EN 355
full body harness P 30 with front and dorsal attachment point, size M-XL or XXL energy absorber ABM with lanyard LB 100 and steel connectors AZ 011 cargo bag, dimensions 31 x 27 x 10cm
• • •
ATTACHMENT POINTS:
1
1
front
dorsal
1
FALL PROTECTION KITS
P 01
USE:
EN 355
Fall protection kits
1
3
BASIC 3
P 03
BASIC 4
ABM + LB 101
Full body harness
energy absorber ABM with lanyard LB 101, 2m long + 2 x AZ 011
P 01
CARGO BAG T2
1
energy absorber ABM with lanyard LB 101 + AZ 011 + AZ 029
CARGO BAG T2
THE KIT COMPRISES :
THE KIT COMPRISES :
•
•
full body harness P 03 with front and dorsal attachment point, size M-XL or XXL energy absorber ABM with lanyard LB 101, 2m long and steel connectors AZ 011 cargo bag, dimensions 31 x 27 x 10cm
• •
FALL PROTECTION KITS
ABM + LB 101
Full body harness
ATTACHMENT POINTS:
1
1
front
dorsal
4
1
Fall protection kits
USE:
EN 355
full body harness P 01 with dorsal attachment point, size M-XL or XXL energy absorber ABM with lanyard LB 101, 2m long and steel connector AZ 011 and steel connector AZ 029 cargo bag, dimensions 31 x 27 x 10cm
• •
ATTACHMENT POINTS:
1
USE:
EN 355
dorsal
WWW.PROTEKT.COM.PL
BASIC 5
ABM + LB 101
energy absorber ABM with lanyard LB 101, 2m long + 2 x AZ 011
P 05
Full body harness
LB 100
adjustable lanyard LB 100, 2m long + 2 x AZ 011
THE KIT COMPRISES :
• • •
ATTACHMENT POINTS:
full body harness P 05 with front and back attachment point and with belt and side attachment buckles, size M-XL or XXL energy absorber ABM with lanyard LB 101, 2m long and steel connectors AZ 011 adjustable lanyard LB 100, 2m long with steel connectors AZ 011 cargo bag, dimensions 31 x 27 x 10cm
1
FALL PROTECTION KITS
•
CARGO BAG T2
USE:
1
1
2
front
dorsal
waist
EN 355
EN 358
Fall protection kits
1
5
BASIC S
P 01S
BASIC 3S
ABM + LB 101
Full body harness
energy absorber ABM with lanyard LB 101, 2m long + 2 x AZ 011
P 03S
ABM + LB 101
Full body harness
energy absorber ABM with lanyard LB 101, 2m long + 2 x AZ 011
CARGO BAG T2
1
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
• •
FALL PROTECTION KITS
CARGO BAG T2
full body harness P 01S with dorsal attachment point, size M-XL or XXL • energy absorber ABM with lanyard LB 101, 2m long and steel connectors AZ 011 cargo bag, dimensions 31 x 27 x 10cm
ATTACHMENT POINTS:
EN 355
1 dorsal
6
USE:
1
Fall protection kits
full body harness P 03S with dorsal attachment point, size M-XL or XXL • energy absorber ABM with lanyard LB 101, 2m long and steel connectors AZ 011 cargo bag, dimensions 31 x 27 x 10cm
• •
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 355
WWW.PROTEKT.COM.PL
BASIC 4S
BASIC 5S NEW CONNECTORS AZ 029
ABM + LB 101
energy absorber ABM with lanyard LB 101, 2m long + 2 x AZ 011
P 01S
ABM + LB 101
Full body harness
energy absorber ABM with lanyard LB 101, 2m long + 2 x AZ 011
P 05S
Full body harness
LB 100 CARGO BAG T2
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
•
•
full body harness P 01S with dorsal attachment point, size M-XL or XXL energy absorber ABM with lanyard LB 101, 2m long and steel connectors AZ 011 connector AZ 029 cargo bag, dimensions 31 x 27 x 10cm
full body harness P 05S with front and dorsal attachment point and with belt and side attachment buckles, size M-XL or XXL energy absorber ABM with lanyard LB 101, 2m long and steel connectors AZ 011 adjustable lanyard LB 100, 2m long with steel connectors AZ 011 cargo bag, dimensions 31 x 27 x 10cm
• • •
ATTACHMENT POINTS:
1 dorsal
USE:
EN 355
ATTACHMENT POINTS:
USE:
1
1
2
front
dorsal
waist
EN 355
Fall protection kits
EN 358
1
7
1
FALL PROTECTION KITS
CARGO BAG T2
adjustable lanyard LB 100, 2m long + 2 x AZ 011
BASIC 6S
NEW CONNECTORS AZ 029
P 01S
ABM SCF
Full body harness
energy absorber BW 220 with twin-tail lanyard and connectors AZ 011 and 2 x AZ 029, total length 1.5m
CARGO BAG T2
FALL PROTECTION KITS
1
THE KIT COMPRISES: • • •
full body harness P 01S with dorsal attachment point, size M-XL or XXL energy absorber BW 220 with twin-tail lanyard and steel connectors AZ 011 and 2 x AZ 029, total length 1.5m cargo bag, dimensions 31 x 27 x 10cm
ATTACHMENT POINTS:
USE:
EN 355
1 dorsal
8
1
Fall protection kits
WWW.PROTEKT.COM.PL
BASIC 7S
NEW CONNECTORS AZ 029
ABM SCF
P 30
Full body harness
CARGO BAG T2
energy absorber BW 220 with twin-tail lanyard and connectors AZ 011 and 2 x AZ 029, total length 1.5m
1
THE KIT COMPRISES: full body harness P 30 with front and dorsal attachment point, size M-XL or XXL energy absorber BW 220 with twin-tail lanyard and steel connectors AZ 011 and 2 x AZ 029, total length 1.5m cargo bag, dimensions 31 x 27 x 10cm
ATTACHMENT POINTS:
1
1
front
dorsal
FALL PROTECTION KITS
• • •
USE:
EN 355
Fall protection kits
1
9
BASIC PRO 1
BASIC PRO 1S
P 01
AC 060 + AZ 011
Full body harness
P 01S
AC 060 + AZ 011
Full body harness
guided type fall arrester with working rope + AZ 011 and AZ 002
guided type fall arrester with working rope + AZ 011 and AZ 002
CARGO BAG T4
1
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
full body harness P 01 with dorsal attachment point, size M-XL or XXL rope grab with energy dissipater LINOSTOP II with working rope and connectors AZ 011, AZ 002 cargo bag, dimensions 45 x 38 x 10cm
• •
FALL PROTECTION KITS
CARGO BAG T4
ATTACHMENT POINTS:
EN 353-2
1 dorsal
10
USE:
1
• •
full body harness P 01S with dorsal attachment point, size M-XL or XXL rope grab with energy dissipater LINOSTOP II with working rope and connectors AZ 011, AZ 002 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
1
USE:
EN 353-2
dorsal
Fall protection kits
WWW.PROTEKT.COM.PL
BASIC PRO 3
BASIC PRO 3S
AC 060 + AZ 011
Full body harness
P 03S
AC 060 + AZ 011
Full body harness
guided type fall arrester with working rope + AZ 011 and AZ 002
guided type fall arrester with working rope + AZ 011 and AZ 002
CARGO BAG T4
CARGO BAG T4
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
• •
full body harness P 30 with front and dorsal attachment point, size M-XL or XXL rope grab with energy dissipater LINOSTOP II with working rope and connectors AZ 011, AZ 002 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 353-2
• •
full body harness P 03S with front and dorsal attachment point, size M-XL or XXL rope grab with energy dissipater LINOSTOP II with working rope and connectors AZ 011, AZ 002 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 353-2
Fall protection kits
1
1
FALL PROTECTION KITS
P 03
11
BASIC PRO 5
BASIC PRO 6
DEVICE VERS
P 30
AC 060 + AZ 011
Full body harness
P 36C
AC 060 + AZ 011
Full body harness
guided type fall arrester with working rope + AZ 011 and AZ 002
guided type fall arrester with working rope + AZ 011 and AZ 002
CARGO BAG T4
1
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
• •
FALL PROTECTION KITS
CARGO BAG T4
full body harness P 30 with front and dorsal attachment point, size M-XL or XXL rope grab with energy dissipater LINOSTOP II with working rope and connectors AZ 011 and AZ 002 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
12
1
1
front
dorsal
1
Fall protection kits
USE:
EN 353-2
• •
full body harness P 36 C with front and dorsal attachment point, size M-XL or XXL rope grab with energy dissipater LINOSTOP II with working rope and connectors AZ 011 and AZ 002 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 353-2
WWW.PROTEKT.COM.PL
BASIC ac 5
BASIC ac 6
SIONS
AC 080 + 2 AZ 011
Full body harness
P 36C
AC 080 + 2 AZ 011
Full body harness
guided type fall arrester with working rope
guided type fall arrester with working rope
CARGO BAG T4
CARGO BAG T4
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
• •
full body harness P 30 with front and dorsal attachment point, size M-XL or XXL guided type fall arrester AC 080 with working rope and connectors AZ 011 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 353-2
• •
full body harness P 36C with front and dorsal attachment point, size M-XL or XXL • guided type fall arrester AC 080 with working rope and connectors AZ 011 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 353-2
Fall protection kits
1
1
FALL PROTECTION KITS
P 30
13
GRIDER
NEW CONNECTORS AZ 029
P 05S
ABM-2T
Full body harness
energy absorber with double webbing + AZ 011 + 2 x AZ 029
LB 100
adjustable lanyard + 2 x AZ 011
THE KIT COMPRISES: CARGO BAG T2
1
• •
FALL PROTECTION KITS
•
ATTACHMENT POINTS:
USE:
1
1
2
front
dorsal
waist
14
1
Fall protection kits
full body harness P 05S with front and dorsal attachment point, belt and side attachment buckles energy absorber with double polyamide webbing ABM-2T and connectors AZ 011 and 2 x AZ 029 adjustable lanyard LB 100, 1.2m long with connectors AZ 011cargo bag, dimensions 31 x 27 x 10cm
EN 355
EN 358
WWW.PROTEKT.COM.PL
GRIDER 2
NEW CONNECTORS AZ 029
P 52PRO
ABM SCF
Full body harness
energy absorber BW 260 15 with twin-tail lanyard, 1.5m long + AZ 011 + 2 x AZ 029 (opening 50mm)
PROT 22
work positioning device, 2m long with connectors AZ 002 and AZ 011
THE KIT COMPRISES:
• • •
ATTACHMENT POINTS:
full body harness P 52PRO with front and dorsal attachment point, belt and side attachment buckles energy absorber BW 260 15 with twin-tail lanyard and connectors AZ 011, 2 x AZ 029 (opening 50mm), 1.5m long work positioning device PROT 22, 2m long with steel connectors AZ 002 and AZ 011 cargo bag, dimensions 31 x 27 x 10cm
USE:
1
1
2
front
dorsal
waist
EN 355
1
FALL PROTECTION KITS
•
CARGO BAG T2
EN 358
Fall protection kits
1
15
ROLER
ROLER 2
AZ 410
connecting lanyard, 1m long with connector AZ 0111
P 30
ROLEX 3
Full body harness
retractable type fall arrester with connectors AZ 029S and AZ 002AS
P 30
Full body harness
CR 240 CARGO BAG T2
1
CARGO BAG AX 011
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
full body harness P 30 with front and dorsal attachment point, size M-XL or XXL retractable type fall arrester AH 220S with connectors AZ 029S and AZ 002AS cargo bag, dimensions 31 x 27 x 10cm
• •
• •
FALL PROTECTION KITS
•
ATTACHMENT POINTS:
1
1
front
dorsal
16
1
Fall protection kits
USE:
EN 360
retractable type fall arrester with cable, 10m long and connector AZ 002ASI
full body harness P 30 with front and dorsal attachment point, size M-XL or XXL connecting lanyard AZ 410, 1m long with connector AZ 011 retractable type fall arrester CR 240 with cable, 10m long and connector AZ 002ASI cargo bag AX 011, dimensions 30 x 30 x 60cm
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 360
WWW.PROTEKT.COM.PL
ROLER 3
WR 025
Full body harness
retractable type fall arrester with connectors AZ 011 and AZ 002A
P 32PRO
WR 040 DOUBLE
Full body harness
retractable type fall arrester with connector AZ 055
CARGO BAG T2
CARGO BAG T4
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
full body harness P 30S with front and dorsal attachment point, size M-XL or XXL retractable type fall arrester WR 025 with connectors AZ 011 and AZ 002AS cargo bag, dimensions 31 x 27 x 10cm
• •
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 360
• •
full body harness P 32PRO with front and dorsal attachment point, size M-XL or XXL retractable type fall arrester WR 040 DOUBLE with connectors AZ 055 (opening 50 mm) cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 360
Fall protection kits
1
FALL PROTECTION KITS
P 03S
ROLER 4
1
17
ROLER 5
P 52PRO
WR 040 DOUBLE
Full body harness
PROT 22
retractable type fall arrester with connector AZ 055
work positioning device, 2m long with connectors AZ 002 and AZ 011
THE KIT COMPRISES: •
1
•
CARGO BAG T4
•
FALL PROTECTION KITS
•
ATTACHMENT POINTS:
USE:
1
1
2
front
dorsal
waist
18
1
Fall protection kits
full body harness P 52PRO with front and dorsal attachment point, belt and side attachment buckles retractable type fall arrester WR 040 DOUBLE with connectors AZ 055 (opening 50 mm) work positioning device PROT 22, 2m long with connectors AZ 002 and AZ 011 cargo bag, dimensions 45 x 38 x 10cm
EN 360
EN 358
WWW.PROTEKT.COM.PL
COMFORT
COMFORT 2 NEW CONNECTORS AZ 029
NEW CONNECTORS AZ 029
ABM/2LE 111 energy absorber + AZ 011 + 2 x AZ 029
P 30
LA 101
Full body harness
energy absorber with connectors AZ 011 and AZ 029
P 51E
Full body harness
PROT 3
THE KIT COMPRISES:
THE KIT COMPRISES:
•
•
full body harness P 30 with front and dorsal attachment point, size M-XL or XXL energy absorber, 1.6m long with connectors AZ 011 and AZ 029 cargo bag, dimensions 31 x 27 x 10cm
•
• • •
ATTACHMENT POINTS:
1
1
front
dorsal
USE:
EN 355
full body harness P 51E with front and dorsal attachment point, size M-XL or XXL energy absorber ABM with twin-tail elastic lanyard LE 111 and connectors AZ 011 and 2 x AZ 029 work positioning device PROT 3, 2m long with connectors AZ 011 and AZ 002 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
USE:
1
1
2
front
dorsal
waist
EN 355
Fall protection kits
EN 358
1
19
1
FALL PROTECTION KITS
CARGO BAG T4
CARGO BAG T2
•
work positioning device, 2m long with connectors AZ 011 and AZ 002
COMFORT 3
NEW CONNECTORS AZ 029
P 52PRO
ABM SCF
Full body harness
energy absorber BW 260 15 + AZ 011 + 2 x AZ 029 (opening 50mm), 1.5m long
PROT 22
work positioning device, 2m long + AZ 011 + AZ 002
THE KIT COMPRISES: •
1
•
CARGO BAG
•
FALL PROTECTION KITS
•
ATTACHMENT POINTS:
USE:
1
1
2
front
dorsal
waist
20
1
Fall protection kits
full body harness P 52PRO with front and dorsal attachment point, belt and side attachment buckles energy absorber BW 260 15 with elastic lanyard and connectors AZ 011 and 2 x AZ 029 (opening 50mm), 1.5m long work positioning device PROT 22, 2m long with steel connectors AZ 002 and AZ 011 cargo bag, dimensions 45 x 38 x 10cm
EN 355
EN 358
WWW.PROTEKT.COM.PL
ROOFER
P 70
PROT 2
Full body harness
AZ 410
2 work positioning device
connecting lanyard, 1m long with connector AZ 011
FALL PROTECTION KIT FOR WORK ON STEEP ROOF THE KIT COMPRISES:
• • •
ATTACHMENT POINTS:
full body harness P 70 with front and dorsal attachment point, adjustable thigh, shoulder straps and waist belt, size M-XL or XXL connecting lanyard AZ 410, 1m long with connector AZ 011 work positioning device PROT 2 with connectors AZ 011 and AZ 002 cargo bag, dimensions 45 x 38 x 10cm
USE:
1
1
2
front
dorsal
waist
1
EN 358
sit harness
Fall protection kits
1
21
1
FALL PROTECTION KITS
•
CARGO BAG
ROOFER PRO
FALL PROTECTION KIT FOR WORK ON STEEP ROOF
AZ 410
2 x connecting lanyard, 1m long with connector AZ 011
P 70
Full body harness
PROT 22
AC 060
work positioning device
guided type fall arrester with working rope with connectors AZ 011 and AZ 002
THE KIT COMPRISES:
1
•
CARGO BAG
FALL PROTECTION KITS
• • • •
full body harness P 70 with front and dorsal attachment point, adjustable thigh, shoulder straps and waist belt, size M-XL or XXL 2 x connecting lanyard AZ 410, 1m long with connector AZ 011 work positioning device PROT 22 with steel connectors AZ 002 and AZ 011 rope grab with energy dissipater LINOSTOP II with working rope and connectors AZ011, AZ002 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
USE:
1
1
2
1
front
dorsal
waist
sit harness
22
1
Fall protection kits
EN 355
EN 358
WWW.PROTEKT.COM.PL
ROOFER AC
FALL PROTECTION KIT FOR WORK ON STEEP ROOF
AZ 410
2 x connecting lanyard, 1m long with connector AZ 011
P 90
Full body harness
AC 080
guided type fall arrester with working rope with connectors 2 x AZ 011
PROT 22
work positioning device
THE KIT COMPRISES: • • • • •
• full body harness P 90 with front and dorsal attachment point, adjustable thigh, shoulder straps and waist belt, size M-XL or XXL 2 x connecting lanyard AZ 410, 1m long with connector AZ 011 work positioning device PROT 22 with steel connectors AZ 002 and AZ 011 guided type fall arrester AC 080 with working rope and connectors AZ 011 cargo bag, dimensions 45 x 38 x 10cm
ATTACHMENT POINTS:
USE:
1
1
2
front
dorsal
waist
2
EN 353-2
EN 358
sit harness
Fall protection kits
1
23
1
FALL PROTECTION KITS
CARGO BAG
LIFTER - CONFINED DESCENT KIT
P 40
AT 300
Full body harness
rescue lifting sling with 3 connectors AZ 011
CR 240
retractable type fall arrester with cable, 10m long and connector AZ 002ASI
THE KIT COMPRISES:
1
FALL PROTECTION KITS
CARGO BAG AX 011
• • • • • • • •
full body harness P 40 with front and dorsal attachment point, size M-XL or XXL retractable type fall arrester with line, 10m long and connector AZ 002ASI rescue lifting sling AT 300 with 3 connectors AZ 011 cargo bag AX 011, dimensions 60 x 30 x 30cm, volume 33L safety tripod TM 9 rescue lifting device RUP 502 with line, 20m long pulley PL 101 cargo bag for tripod TM 9
ATTACHMENT POINTS:
1
1
front
dorsal
24
1
Fall protection kits
WWW.PROTEKT.COM.PL
RUP 502
TM 9
rescue lifting device with line, 20m long
Safety tripod
CARGO BAG AX 016 FOR TRIPOD TM 9
FALL PROTECTION KITS
1
PL 101 Pulley
Fall protection kits
1
25
LIFTER 2 - CONFINED DESCENT KIT
P 40
AT 300
Full body harness
rescue lifting sling with 3 connectors AZ 011
CRW 300
retractable type fall arrester with rescue lifting device and cable, 25m long
THE KIT COMPRISES: • • •
1
FALL PROTECTION KITS
CARGO BAG AX 012
• • • • •
full body harness P 40 with front and dorsal attachment point, size M-XL or XXL rescue lifting sling AT 300 with 3 connectors AZ 011 retractable type fall arrester CRW 300 with rescue lifting device and cable, 25m long cargo bag AX 012, dimensions 80 x 40 x 40cm, volume 81L safety tripod TM 9 with fixing adapter AZ 171 for CRW 300 pulley PL 101 safety fence AT 203 cargo bag for tripod TM 9
ATTACHMENT POINTS:
1
1
front
dorsal
26
1
Fall protection kits
WWW.PROTEKT.COM.PL
PL 101 Pulley
AT 171
TM 9
fixing adapter for CRW 300
Safety tripod
CARGO BAG AX 016 FOR TRIPOD TM 9
FALL PROTECTION KITS
1
AT 203
Scissor fence
Fall protection kits
1
27
LIFTER 3 - CONFINED DESCENT KIT
P 40
AT 300
Full body harness
rescue lifting sling with 3 connectors AZ 011
CRW 200
retractable type fall arrester with rescue lifting device and cable, 15m long
THE KIT COMPRISES: • • •
1
FALL PROTECTION KITS
CARGO BAG AX 012
• • • • •
full body harness P 40 with front and dorsal attachment point, size M-XL or XXL rescue lifting sling AT 300 with 3 connectors AZ 011 retractable type fall arrester CRW 200 with rescue lifting device and cable, 15 m long cargo bag AX 012, dimensions 80 x 40 x 40cm, volume 81L safety tripod TM 9 with fixing adapter for CRW 200 pulley PL 101 safety fence AT 203 cargo bag for tripod TM 9
ATTACHMENT POINTS:
1
1
front
dorsal
28
1
Fall protection kits
WWW.PROTEKT.COM.PL
PL 101 Pulley
AT 173
TM 9
fixing adapter for CRW 200
Safety tripod
CARGO BAG AX 016 FOR TRIPOD TM 9
FALL PROTECTION KITS
1
AT 203
Scissor fence
Fall protection kits
1
29
LIFTER 4 - CONFINED DESCENT KIT
P 40
AT 300
Full body harness
rescue lifting sling with 3 connectors AZ 011
CRW 200
retractable type fall arrester with rescue lifting device and cable, 15m long
THE KIT COMPRISES: • • •
1
FALL PROTECTION KITS
CARGO BAG AX 012
• • • •
full body harness P 40 with front and dorsal attachment point, size M-XL or XXL rescue lifting sling AT 300 with 3 connectors AZ 011 retractable type fall arrester CRW 200 with rescue lifting device and cable, 15 m long cargo bag AX 012, dimensions 80 x 40 x 40cm, volume 81L safety tripod TM 14 with fixing adapter for CRW 200 pulley PL 101 cargo bag for tripod TM 14
ATTACHMENT POINTS:
1
1
front
dorsal
30
1
Fall protection kits
WWW.PROTEKT.COM.PL
TM 14
Safety tripod
1
Pulley
AT 174
FALL PROTECTION KITS
PL 101
fixing adapter for CRW 200
CARGO BOX FOR TRIPOD TM 14
Fall protection kits
1
31
FULL BODY HARNESSES, PROCETIVE CLOTHING
2
Full body harnesses, protective clothing 2-3
Full body harness Heat-resistant full body harness
2 - 65
Hi Vision full body harness
2 - 89
Overalls with full body harness
2 - 97
SOFTSHELL jackets
2 - 98
Harness with vest
2 - 101
Protective vests
2 - 102
2
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
P 01
Full body harness
EN 361
Ref. no.:
AB 101 01
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
1 CHEST STRAP
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 dorsal
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
EN 361
Full body harnesses, protective clothing
2
3
P 01B
Full body harness
EN 361
Ref. no.:
AB 101 03
CHEST STRAP
1
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
INUMBER OF ATTACHMENT POINTS
1 dorsal ADJUSTABLE THIGH STRAP
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
VERSION
WEIGHT
M - XL
650 g
XXL
670 g
DORSAL ATTACHMENT POINT
1
EN 361 Dorsal attachment D-ring
4
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 01S
Full body harness
EN 361
Ref. no.:
1
CHEST STRAP
AB 101 02
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 dorsal
ADJUSTABLE THIGH STRAP
VERSION
WEIGHT
M - XL
690 g
XXL
710 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
DORSAL ATTACHMENT POINT
1
EN 361
Full body harnesses, protective clothing
2
5
P 02
Full body harness
EN 361, EN 358
Ref. no.:
AB 102 01
SPECIAL FEATURES
1
CHEST STRAP
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
2
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 1
2
dorsal
waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1050 g
XXL
1150 g
BELT
2
EN 361
6
VERSION
2
EN 358
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 02S
Full body harness
EN 361, EN 358
Ref. no.:
AB 102 02
SPECIAL FEATURES CHEST STRAP
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
1
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2
1
2
dorsal
waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
EN 361
VERSION
WEIGHT
M - XL
1100 g
XXL
1200 g
BELT
2
EN 358 Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
7
P 03
Full body harness
EN 361
Ref. no.:
AB 103 01
1
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
CHEST STRAP
2
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
1
2
dorsal
front
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
WEIGHT
M - XL
690 g
XXL
700 g
FRONT ATTACHMENT POINT
2
1
EN 361
8
VERSION
2
EN 361
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 03AL
Full body harness
EN 361
Ref. no.
1
AB 103 05
CHEST STRAP
2
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
AL
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
1
2
dorsal
front
VERSION
WEIGHT
M - XL
670 g
XXL
680 g
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
All buckles made of aluminium
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
9
P 03S
Full body harness
EN 361
Ref. no.:
AB 103 02
CHEST STRAP
2
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
1
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
730 g
XXL
740 g
FRONT ATTACHMENT POINT
2
EN 361
10
VERSION
2
EN 361
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 05
Full body harness
EN 361, EN 358
Ref. no.:
AB 105 01
SPECIAL FEATURES
1
Tested for maximum user's weight 140 kg
CHEST STRAP
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
2 MANUFACTURE
3
3
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
2 3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
pas
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
EN 361
FRONT ATTACHMENT POINT
2
EN 361
VERSION
WEIGHT
M - XL
1120 g
XXL
1220 g
BELT
3
EN 358
Full body harnesses, protective clothing
2
11
P 05S
Full body harness
EN 361, EN 358
Ref. no.:
AB 105 02
SPECIAL FEATURES
1 CHEST STRAP
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
2 MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3
3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
1
2
dorsal
front
3 waist
DORSAL ATTACHMENT POINT
1
2
EN 361
12
FRONT ATTACHMENT POINT
2
EN 361
Full body harnesses, protective clothing
VERSION
WEIGHT
M - XL
1160 g
XXL
1260 g
BELT
3
EN 358
WWW.PROTEKT.COM.PL
P 10
Full body harness
EN 361
Ref. no.:
AB 110 01
1
SPECIAL FEATURES
CHEST STRAP
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 dorsal
2
VERSION
WEIGHT
M - XL
870 g
XXL
900 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
EN 361
Full body harnesses, protective clothing
2
13
P 10A
Full body harness
EN 361
Ref. no.:
1
AB 111 01
CHEST STRAP
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 dorsal
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
AL All buckles made of aluminium
VERSION
WEIGHT
M - XL
920 g
XXL
1000 g
DORSAL ATTACHMENT POINT
1
EN 361 Dorsal attachment D-ring
14
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 10R
Full body harness
EN 361, EN 1497
Ref. no.:
AB 110 03
3
SPECIAL FEATURES
1
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
2 NUMBER OF ATTACHMENT POINTS
1
2
dorsal
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
EN 361
FRONT ATTACHMENT POINT
2
EN 361
front
2
3 rescue
VERSION
WEIGHT
M - XL
1460 g
XXL
1600 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTING BUCKLE
RESCUE ATTACHMENT POINT
3
EN 1497
Full body harnesses, protective clothing
2
15
P 11
Full body harness
EN 361
Ref. no.:
AB 110 07

PRODUCT PRESENTATION protekt.co/p11
SPECIAL FEATURES
1
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
2
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
ADJUSTING BUCKLE
NUMBER OF ATTACHMENT POINTS
2
dorsal
front
ADJUSTABLE THIGH STRAP
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
1
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1100 g
XXL
1150 g
FRONT ATTACHMENT POINT
2
EN 361
16
VERSION
2
EN 361
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 11C
Full body harness
EN 361
Ref. no.:
AB 110 06
SPECIAL FEATURES
1
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
AUTOMATIC BUCKLE
2
Webbing:
polyester 45mm
Buckles:
automatic aluminium
Threads:
polyester
ADJUSTING BUCKLE
NUMBER OF ATTACHMENT POINTS
AL
1
2
dorsal
front
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
1
EN 361
VERSION
WEIGHT
M - XL
1100 g
XXL
1200 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
DORSAL ATTACHMENT POINT
2
FRONT ATTACHMENT POINT
2
EN 361
Full body harnesses, protective clothing
2
17
P 20
Full body harness
EN 361, EN 358
Ref. no.:
AB 120 01

PRODUCT PRESENTATION protekt.co/p20
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
CHEST STRAP
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 1
2
dorsal
waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1350 g
XXL
1450 g
BELT
2
EN 361
18
VERSION
2
EN 358
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 20C
Full body harness
EN 361, EN 358
Ref. no.:
AB 120 03
1 CHEST STRAP
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2
AL
1
2
dorsal
waist
2
DORSAL ATTACHMENT POINT
1
EN 361
VERSION
WEIGHT
M - XL
1600 g
XXL
1690 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
BELT
2
EN 358
Full body harnesses, protective clothing
2
19
P 30
Full body harness
EN 361
Ref. no.:
AB 130 01

1
PRODUCT PRESENTATION protekt.co/p30
SPECIAL FEATURES
Protection up to 140 Kg PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS ADJUSTING BUCKLE
CHEST STRAP
2
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
1
2
dorsal
front
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1010 g
XXL
1080 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361 Front attachment point
20
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 30A
Full body harness
EN 361
Ref. no.: AB 131 10
1
SPECIAL FEATURES
N
ADJUSTING BUCKLE
CHEST STRAP
ALL BUCKLES MADE OF STAINLESS STEEL
MANUFACTURE
2
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
ADJUSTABLE THIGH STRAP
1
2
dorsal
front
2
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1135 g
XXL
1205 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
EN 361
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
21
P 30C
Full body harness
EN 361
Ref. no.:
AB 130 03
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS ADJUSTING BUCKLE
MANUFACTURE
CHEST STRAP
2
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
AL
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
AUTOMATIC ALUMINIUM BUCKLE
1
2
dorsal
front
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1100 g
XXL
1180 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
22
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 30E
Full body harness
EN 361
Ref. no.:
AB 130 02
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ADJUSTING BUCKLE
MANUFACTURE CHEST STRAP
2
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
2
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1235 g
XXL
1305 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
23
P 30EC
Full body harness
EN 361
Ref. no.:
AB 130 05
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
CHEST STRAP
2 NUMBER OF ATTACHMENT POINTS
AL
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
1
2
dorsal
front
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1305 g
XXL
1395 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
24
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 35
Full body harness
EN 361
Ref. no.:
AB 135 01
1
ADJUSTING BUCKLE
MANUFACTURE
2
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
ADJUSTABLE THIGH STRAP
1
VERSION
WEIGHT
M - XL
1150 g
XXL
1200 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
DORSAL ATTACHMENT POINT
2
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
25
P 35C
Full body harness
EN 361
Ref. no.:
AB 135 03
ADJUSTING BUCKLE
1 MANUFACTURE
2
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
AL AUTOMATIC ALUMINIUM BUCKLE
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1220 g
XXL
1270 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
26
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 35CR
Full body harness
EN 361, EN 1497
Ref. no.:
AB 135 04
3
SPECIAL FEATURES
Tested for maximum user's weight 140 kg ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300 MANUFACTURE
1
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 1
2
dorsal
front
AL AUTOMATIC ALUMINIUM BUCKLE
3 rescue
2
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1395 g
XXL
1475 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
RESCUE ATTACHMENT POINT
3
EN 361
EN 361
EN 1497
Dorsal attachment D-ring
Front attachment point
Rescue attachment point
Full body harnesses, protective clothing
2
27
P 35E
Full body harness
EN 361
Ref. no.:
AB 135 02
1 ADJUSTING BUCKLE
MANUFACTURE
2
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
1
2
dorsal
front
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1220 g
XXL
1270 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
28
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 36
Full body harness
EN 361
Ref. no.:
AB 136 01
1 MANUFACTURE
ADJUSTING BUCKLE
2
Webbing:
polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1080 g
XXL
1130 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
29
P 36AL
Full body harness
EN 361
Ref. no.:
AB 136 04
MANUFACTURE
1
ADJUSTING BUCKLE
2
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1065 g
XXL
1135 g
FRONT ATTACHMENT POINT
2
AL EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
30
2
Full body harnesses, protective clothing
ALUMINIUM BUCKLE
WWW.PROTEKT.COM.PL
P 36C
Full body harness
EN 361
Ref. no.:
AB 136 03
1
MANUFACTURE
ADJUSTING BUCKLE
2
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
AL
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1100 g
XXL
1160 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
31
NEW
P 37
Full body harness
EN 361
Ref. no.:
AB 137 01
1
ELASTIC WEBBING
MANUFACTURE
Webbing:
polyester
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS ADJUSTING BUCKLE
1 dorsal EN 361
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
VERSION
WEIGHT
M - XL
1270 g
XXL
1420 g
DORSAL ATTACHMENT POINT
1
EN 361 Dorsal attachment D-ring
32
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
NEW
P 37C
Full body harness
EN 361
Ref. no.:
AB 137 02
1
ELASTIC WEBBING
MANUFACTURE
Webbing:
polyester
Buckles:
galvanized steel / aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS ADJUSTING BUCKLE
1 dorsal EN 361
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP VERSION
WEIGHT
M - XL
1330 g
XXL
1470 g
DORSAL ATTACHMENT POINT
1
EN 361 Dorsal attachment D-ring
Full body harnesses, protective clothing
2
33
NEW
P 37R
Full body harness
EN 361, EN 1497
Ref. no.:
AB 137 03
2
MANUFACTURE
1
Webbing:
polyester
Buckles:
galvanized steel
Threads:
polyester
ELASTIC WEBBING
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
rescue
ADJUSTING BUCKLE EN 361
EN 1497
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
WEIGHT
M - XL
1435 g
XXL
1595 g
RESCUE ATTACHMENT POINT
2
1
EN 361
EN 1497
Dorsal attachment D-ring
Rescue attachment point
34
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
NEW
P 37CR
Full body harness
EN 361, EN 1497
Ref. no.:
AB 137 04
2
1
MANUFACTURE
ELASTIC WEBBING
Webbing:
polyester
Buckles:
galvanized steel / aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
ADJUSTING BUCKLE
1
2
dorsal
rescue EN 361
EN 1497
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1495 g
XXL
1655 g
RESCUE ATTACHMENT POINT
2
EN 361
EN 1497
Dorsal attachment D-ring
Rescue attachment point
Full body harnesses, protective clothing
2
35
NEW
P 39
Full body harness
EN 361
Ref. no.:
AB 139 01
1 ELASTIC WEBBING
MANUFACTURE
Webbing:
polyester
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 ADJUSTING BUCKLE
1
2
dorsal
front EN 361
EN 361
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
WEIGHT
M - XL
1380g
XXL
1520 g
FRONT ATTACHMENT POINT
2
1
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
36
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
NEW
P 39C
Full body harness
EN 361, EN 1497
Ref. no.:
AB 139 02
1
ELASTIC WEBBING
MANUFACTURE
Webbing:
polyester
Buckles:
galvanized steel / aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 1
2
dorsal
front EN 361
EN 361
2
AL
FULL BODY HARNESSES, PROTECTIVE CLOTHING
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1445g
XXL
1585 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
37
NEW
P 39R
Full body harness
EN 361, EN 1497
Ref. no.:
AB 139 03
3
1
MANUFACTURE
ELASTIC WEBBING
Webbing:
polyester
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front EN 361
ADJUSTING BUCKLE
EN 361
2 3
2
rescue
FULL BODY HARNESSES, PROTECTIVE CLOTHING
EN 1497
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
FRONT ATTACHMENT POINT
2
1
VERSION
WEIGHT
M - XL
1550g
XXL
1690 g
RESCUE ATTACHMENT POINT
3
EN 361
EN 361
EN 1497
Dorsal attachment D-ring
Front attachment point
Rescue attachment point
38
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
NEW
P 39CR
Full body harness
EN 361, EN 1497
Ref. no.:
AB 139 04
3
1
MANUFACTURE
Webbing:
polyester
Buckles:
galvanized steel / aluminium
Threads:
polyester
ELASTIC WEBBING
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
ADJUSTING BUCKLE
EN 361
2
EN 361
3
2
rescue
FULL BODY HARNESSES, PROTECTIVE CLOTHING
EN 1497
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1610g
XXL
1760 g
RESCUE ATTACHMENT POINT
3
EN 361
EN 361
EN 1497
Dorsal attachment D-ring
Front attachment point
Rescue attachment point
Full body harnesses, protective clothing
2
39
P 40
Full body harness
EN 361
Ref. no.:
AB 140 01
SPECIAL FEATURES
1
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS ADJUSTING BUCKLE
2
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
2
CONNECTING AND ADJUSTING BUCKLE
MANUFACTURE Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2
1
2
dorsal
dorsal
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1050g
XXL
1200 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
40
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 40A
Full body harness
EN 361
Ref. no.:
AB 141 01
1
SPECIAL FEATURES
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
2
2
MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
stainless steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
dorsal
2
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1260g
XXL
1310 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
41
P 40C
Full body harness
EN 361
Ref. no.:
AB 140 03
1
ADJUSTING BUCKLE
SPECIAL FEATURES
2
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
2
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
1
2
dorsal
front
AL
2X EN 361
EN 361
AUTOMATIC ALUMINIUM BUCKLE
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1090g
XXL
1240 g
DORSAL ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
42
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 42
Full body harness
EN 361, EN 358
Ref. no.:
AB 142 01
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
1 ADJUSTING BUCKLE
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
2
2 MANUFACTURE
3
3
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
waist
DORSAL ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1530g
XXL
1750 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
43
P 50
Full body harness
EN 361, EN 358
Ref. no.:
AB 150 01

PRODUCT PRESENTATION
SPECIAL FEATURES
protekt.co/p50
Protection up to 140 Kg PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
1
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
ADJUSTING BUCKLE CHEST STRAP
NUMBER OF ATTACHMENT POINTS
2
1
2
dorsal
front
3
3
2
3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
waist
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1640g
XXL
1790 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
44
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 56
Full body harness
EN 361, EN 358
Ref. no.:
AB 156 01
ADJUSTING BUCKLE
MANUFACTURE
1 2
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3
1
2
dorsal
front
3
3
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
waist
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1500 g
XXL
1640 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
45
P 56AL2
Full body harness
EN 361, EN 358
Ref. no.:
AB 156 05
MANUFACTURE
1
2
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3
1
2
dorsal
front
3
3 waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
2380 g
XXL
2510 g
BELT
3
AL EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
46
2
Full body harnesses, protective clothing
ALUMINIUM BUCKLE
EN 358 Work positioning belt with side attachment buckles
WWW.PROTEKT.COM.PL
P 56C
Full body harness
EN 361, EN 358
Ref. no.:
AB 156 03
MANUFACTURE ADJUSTING BUCKLE
1
2
3
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3 3 waist
AL
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1530 g
XXL
1670 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
47
P 58C
Full body harness
EN 361, EN 358
Ref. no.:
AB 158 03
1
ADJUSTING BUCKLE
2
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3
1
2
dorsal
front
3 3
AL
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
waist
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
2380 g
XXL
2210g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
48
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 33EL
Full body harness
EN 361
Ref. no.:
AB 133 01
1
SOFT PADDING
MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
ADJUSTING BUCKLE
1
2
dorsal
front
SOFT PADDING
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1500 g
XXL
1660 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
49
P 34EL
Full body harness
EN 361
Ref. no.:
AB 134 01
1
SOFT PADDING
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
2
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
SOFT PADDING
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1600 g
XXL
1700 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
50
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 12PRO
Full body harness
EN 361
Ref. no.:
AB 112 01
SOFT PADDING
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
1 MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 dorsal
AL
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
SOFT PADDING
VERSION
WEIGHT
M - XL
1115 g
XXL
1165 g
DORSAL ATTACHMENT POINT
1
EN 361 Dorsal attachment D-ring
Full body harnesses, protective clothing
2
51
P 22PRO
Full body harness
EN 361, EN 358
Ref. no.:
AB 122 01
SOFT PADDING
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
3
ADJUSTING BUCKLE
3
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
3
dorsal
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
waist
SOFT PADDING
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1450 g
XXL
1550 g
BELT
3
EN 361
EN 358
Dorsal attachment D-ring
Work positioning belt with side attachment buckles
52
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 32PRO
Full body harness
EN 361
Ref. no.:
AB 132 01

PRODUCT PRESENTATION
SOFT PADDING
protekt.co/p32pro
1 SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ADJUSTING BUCKLE
2 MANUFACTURE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
AL AUTOMATIC ALUMINIUM BUCKLE
1
2
dorsal
waist
2
SOFT PADDING
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1650 g
XXL
1750 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
53
P 52PRO
Full body harness
EN 361, EN 358
Ref. no.:
1
AB 152 01
SOFT PADDING
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 3
3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
dorsal
front
3
AL
2
1
waist
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
SOFT PADDING
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1650 g
XXL
1750 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
54
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 51E
Full body harness
EN 361, EN 358
Ref. no.:
AB 151 02
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ELASTIC WEBBING
1 MANUFACTURE ADJUSTING BUCKLE CHEST STRAP
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
2 NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3 3 3 waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1945 g
XXL
2080 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
55
P 51E ISOL
Full body harness
EN 361, EN 358
Ref. no.:
AB 151 03
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
1 MANUFACTURE ISOLATED ADJUSTING BUCKLE
CHEST STRAP
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
2 NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3
3
3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
waist
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
2105 g
XXL
2240 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with isolated side attachment buckles
56
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 51E/LT401
Full body harness
EN 361, EN 358
Ref. no.:
AB 151 02 / LT 401
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
ADJUSTING BUCKLE
CHEST STRAP
2
3
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3 3
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
waist
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
2035 g
XXL
2170 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
57
P 60
Full body harness
EN 361, EN 358
Ref. no.:

AB 160 01
PRODUCT PRESENTATION
1
protekt.co/p60
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
CHEST STRAP
NUMBER OF ATTACHMENT POINTS
2
3
1
2
dorsal
front
3
2
3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
waist
ADJUSTING BUCKLE
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1720 g
XXL
1870 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
58
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 60E
Full body harness
EN 361, EN 358
Ref. no.:
AB 160 02
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ELASTIC WEBBING
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
CHEST STRAP
NUMBER OF ATTACHMENT POINTS
2
3
2
dorsal
front
2
3
3
DORSAL ATTACHMENT POINT
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1880 g
XXL
1960 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
waist
ADJUSTABLE THIGH STRAP
1
1
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
59
P 61
Full body harness
EN 361, EN 358
Ref. no.:
AB 161 01
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
CHEST STRAP
NUMBER OF ATTACHMENT POINTS
2 3
1
2
dorsal
front
3 3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
waist MOVABLE BELT
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1880 g
XXL
1960 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
60
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 61C
Full body harness
EN 361, EN 358
Ref. no.:
AB 161 03
1
ADJUSTING BUCKLE
MANUFACTURE
CHEST STRAP
2
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3
3
1
2
dorsal
front
3
2
waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
MOVABLE BELT
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
2145 g
XXL
2300 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
61
P 61E
Full body harness
EN 361, EN 358
Ref. no.:
AB 161 02
1 SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE ELASTIC WEBBING
ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 3
1
2
dorsal
front
3 3
2
waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
MOVABLE BELT
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1880 g
XXL
1960 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
62
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 61EC
Full body harness
EN 361, EN 358
Ref. no.:
AB 161 04
MANUFACTURE
1
ELASTIC WEBBING
ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
CHEST STRAP
2 1
2
dorsal
front
3
3
3
2
waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
MOVABLE BELT
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2
63
P 62EC
Full body harness
EN 361, EN 358
Ref. no.:
AB 162 04
1
MANUFACTURE ADJUSTING BUCKLE
ELASTIC WEBBING
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 1
2
dorsal
front
3 3 3 waist
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
2370 g
XXL
2490 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
64
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 30N
Full body harness
EN 361
Ref. no.:
AB 131 01
1
SPECIAL FEATURES
Tested for maximum user's weight 140 kg PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
ARAMID WEBBING
MANUFACTURE ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
2 NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
ADJUSTABLE THIGH STRAP
1
VERSION
WEIGHT
M - XL
1030 g
XXL
1090 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
DORSAL ATTACHMENT POINT
2 EN 361
EN 361
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
65
P 30NR
Full body harness
EN 361, EN 1497
Ref. no.:
AB 131 02
1 NATURAL LEATHER CROSSING PLATE
SPECIAL FEATURES
Tested for maximum user's weight 140 kg PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ARAMID WEBBINGY
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
ADJUSTING BUCKLE
MANUFACTURE
2
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
1
2
dorsal
front EN 361
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1030 g
XXL
1090 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
66
VERSION
EN 361
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 50N
Full body harness
EN 361, EN 358
Ref. no.:
AB 151 01
SPECIAL FEATURES
NATURAL LEATHER CROSSING PLATE
Tested for maximum user's weight 140 kg
1
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
ARAMID WEBBING
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
2 NUMBER OF ATTACHMENT POINTS
ARAMID FABRIC
1
2
dorsal
front
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
EN 361
EN 361
AL 3 waist
EN 358
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1600 g
XXL
1680 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
3
3
2
67
P 50N ISOL
Full body harness
EN 361, EN 358
Ref. no.:
AB 151 01 ISOL
1
NATURAL LEATHER CROSSING PLATE
ARAMID WEBBING
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
SHRINK SLEEVE
MANUFACTURE
2
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
3 3
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
EN 361
AL
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
EN 361
3 waist
EN 358
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1690 g
XXL
1790 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
68
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 70
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 170 01
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ADJUSTING BUCKLE
MANUFACTURE
2
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
4
3
Webbing:
3 1
2
dorsal
front
EN 361
2 waist
sit harness
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1660 g
XXL
1760 g
BELT
FULL BODY HARNESSES, PROTECTIVE CLOTHING
4
3
SIT HARNESS
3
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
Full body harnesses, protective clothing
2
69
P 70C
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 170 03
1 ELASTIC WEBBING
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
2
3
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
3
4
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
EN 361
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
EN 361
3
4
waist
sit harness EN 813
EN 358
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1660 g
XXL
1760 g
BELT
3
SIT HARNESS
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
70
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 71
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 171 01
1
ADJUSTING BUCKLE
2
MANUFACTURE
4
Webbing:
polyester 45 mm
Buckles:
galvanized steel
3
Threads:
polyester
4
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3
4
waist
sit harness EN 813
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT FRONT ATTACHMENT POINT
1
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
VERSION
WEIGHT
M - XL
1660 g
XXL
1760 g
BELT
SIT HARNESS
3
4
EN 358
EN 813
Work positioning belt with side attachment buckles
Attachment point for sit harness
Full body harnesses, protective clothing
2
71
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
P 71C
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 171 03
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
ADJUSTING BUCKLE
2
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3 4
4
1
2
dorsal
front EN 361
EN 361
3
4
waist
2
sit harness EN 813
EN 358
FULL BODY HARNESSES, PROTECTIVE CLOTHING
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT FRONT ATTACHMENT POINT
1
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
72
2
Full body harnesses, protective clothing
VERSION
WEIGHT
M - XL
1720 g
XXL
1820 g
BELT
3
EN 358 Attachment point for sit harness
SIT HARNESS
4
EN 813 Attachment point for sit harness
WWW.PROTEKT.COM.PL
P 71CR
Full body harness
EN 361, EN 358, EN 813, EN1497
Ref. no.:
AB 171 05
SPECIAL FEATURES
1
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
5
Tested for maximum user's weight 140 kg ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
MANUFACTURE
ADJUSTING BUCKLE
2
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
4
2
dorsal
front
3
4 sit harness
waist
2
3
AL
5
AUTOMATIC ALUMINIUM BUCKLE
evacuation
ADJUSTABLE THIGH STRAP
EN 1497
DORSAL FRONT ATTACHMENT POINT ATTACHMENT POINT
1
2
BELT
3
VERSION
WEIGHT
M - XL
1780 g
XXL
1890 g
SIT HARNESS
4
RESCUE ATTACHMENT POINT
5
EN 361
EN 361
EN 358
EN 813
EN 1497
Dorsal attachment D-ring
Front attachment point
Attachment point for sit harness
Attachment point for sit harness
Rescue attachment point
Full body harnesses, protective clothing
2
73
FULL BODY HARNESSES, PROTECTIVE CLOTHING
4
1
P 71E
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 171 02
1 SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE ADJUSTING BUCKLE
2 NUMBER OF ATTACHMENT POINTS
3
ADJUSTING BUCKLE
2
dorsal
front
3
4
4
4
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
1
waist
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
sit harness
VERSION
WEIGHT
M - XL
1720 g
XXL
1820 g
BELT
3
SIT HARNESS
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
74
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 73
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 173 01
SPECIAL FEATURES
ADAPTED TO USE CLAMPING DEVICE
1 ADJUSTING BUCKLE
Tested for maximum user's weight 140 kg MANUFACTURE
2
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3 4
1
2
dorsal
front
3
AL
4
waist
2
sit harness
AUTOMATIC ALUMINIUM BUCKLE
FULL BODY HARNESSES, PROTECTIVE CLOTHING
4
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1780 g
XXL
1890 g
BELT
SIT HARNESS
3
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
Full body harnesses, protective clothing
2
75
P 80
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 180 01
1
MANUFACTURE ADJUSTING BUCKLE
2 3
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
4
2
1
4
front
dorsal
4
3
2
waist
sit harness
FULL BODY HARNESSES, PROTECTIVE CLOTHING
EN 813
AL AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1720 g
XXL
1820 g
BELT
3
SIT HARNESS
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
76
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 80E
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 180 02
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ELASTIC WEBBING
1
Tested for maximum user's weight 140 kg
ELASTIC WEBBING
MANUFACTURE
2
3
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
4
1
2
dorsal
front
3
4
waist
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1780 g
XXL
1860 g
BELT
3
2
sit harness
FULL BODY HARNESSES, PROTECTIVE CLOTHING
4
SIT HARNESS
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
Full body harnesses, protective clothing
2
77
P 80E ISOL
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 180 03
1
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
CHEST STRAP
MANUFACTURE
2 3
Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
4 4
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
1
2
dorsal
front
3
4
waist
sit harness EN 813
DORSAL ATTACHMENT POINT FRONT ATTACHMENT POINT
1
2
VERSION
WEIGHT
M - XL
1800 g
XXL
1800 g
BELT
3
SIT HARNESS
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
78
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 81
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 181 01
1
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
ADJUSTING BUCKLE
MANUFACTURE
2 Webbing:
polyester 45 mm
Buckles:
automatic aluminium
Threads:
polyester
4
4
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3
EN 361
2 waist
sit harness EN 358
DORSAL ATTACHMENT POINT FRONT ATTACHMENT POINT
1
2
EN 813
VERSION
WEIGHT
M - XL
1890 g
XXL
1980 g
BELT
SIT HARNESS
3
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
Full body harnesses, protective clothing
2
79
FULL BODY HARNESSES, PROTECTIVE CLOTHING
4
3
P 81D
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 181 03
1
ADJUSTING BUCKLE
MANUFACTURE
2
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
4
4
1
2
dorsal
front
3
4
3
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
waist
sit harness EN 813
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1810 g
XXL
1900 g
BELT
3
SIT HARNESS
4
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Rescue attachment point
80
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 86R
Full body harness
EN 361, EN 358, EN 1497
Ref. no.:
AB 186 01
SPECIAL FEATURES
Tested for maximum user's weight 140 kg 3
1
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300 MANUFACTURE
2 CHEST STRAP ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
4
2 3
4
waist
ISOLATING SLEEVES
DORSAL ATTACHMENT POINT FRONT ATTACHMENT POINT
1
2
rescue
VERSION
WEIGHT
M - XL
1820 g
XXL
1960 g
RESCUE ATTACHMENT POINT
BELT
3
4
EN 361
EN 361
EN 358
EN 1497
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
Full body harnesses, protective clothing
2
81
FULL BODY HARNESSES, PROTECTIVE CLOTHING
4
P 87R
Full body harness
EN 361, EN 358, EN 1497
Ref. no.:
AB 187 01
SPECIAL FEATURES
Tested for maximum user's weight 140 kg 1
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
3
MANUFACTURE
2
4
4
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3
4
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 waist AUTOMATIC ADJUSTING BUCKLE
DORSAL ATTACHMENT POINT
1
rescue EN 358
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
2540 g
XXL
2750 g
BELT
3
RESCUE
4
EN 361
EN 361
EN 358
EN 1497
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Rescue loops
82
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 90
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 190 01
ADJUSTING BUCKLE
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Tested for maximum user's weight 140 kg
1 5
1 MANUFACTURE
4
3
3
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
2 3
4
waist
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
WORK POSITIONING
3
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
sit harness
VERSION
WEIGHT
M - XL
1950 g
XXL
2030 g
SIT HARNESS
4
5
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
Full body harnesses, protective clothing
2
83
P 90C
Full body harness
EN 361, EN 358, EN 813
Ref. no.:
AB 190 03
SPECIAL FEATURES ADJUSTING BUCKLE
Tested for maximum user's weight 140 kg MANUFACTURE
2
1
5
3
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3
4
1
2
dorsal
front
3
4
waist
sit harness
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
WORK POSITIONING
3
VERSION
WEIGHT
M - XL
1950 g
XXL
2030 g
SIT HARNESS
4
5
EN 361
EN 361
EN 358
EN 813
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Attachment point for sit harness
84
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 10F
Full body harness
EN 361
Ref. no.:
AB 110 04
1
MANUFACTURE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 dorsal
SOFT SAFETY PADDING
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 ADJUSTABLE THIGH STRAP
VERSION
WEIGHT
S
1000 g
M - XL
1050 g
XXL
1150 g
DORSAL ATTACHMENT POINT
1
EN 361 Dorsal attachment D-ring
Full body harnesses, protective clothing
2
85
P 14R
Full body harness
EN 361, EN 1497
Ref. no.:
AB 114 01
MANUFACTURE
ADJUSTING BUCKLE
CHEST STRAP
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 front EN 361
1
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
ADJUSTABLE THIGH STRAP
VERSION
WEIGHT
M - XL
1600 g
XXL
1720 g
FRONT ATTACHMENT POINT
1
EN 361 Front attachment point
86
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 15E
Full body harness
EN 361
Ref. no.:
1
ADJUSTING BUCKLE
CHEST STRAP
AB 115 02
MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1 dorsal
2
VERSION
WEIGHT
M - XL
1220 g
XXL
1290 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
EN 361 Dorsal attachment D-ring
Full body harnesses, protective clothing
2
87
NEW
P 16
Full body harness
EN 361, EN 813
Ref. no.:
AB 116 01
1
CHEST STRAP
MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
ADJUSTING BUCKLE
1
2
dorsal
front EN 361
EN 813
2
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 SIT HARNESS
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
WEIGHT
M - XL
1360 g
XXL
1430 g
SIT HARNESS
2
EN 361
EN 813
Dorsal attachment D-ring
Front attachment point
88
VERSION
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
HI VISION FULL BODY HARNESS
HV GREEN REFLECTIVE TAPES FOR BETTER
NEW BELT WITH ADDITIONAL REFLECTIVE TAPES
REFLECTIVE MARKERS FOR BETTER HARNESS VISIBILITY
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
NEW
P 10R HV
Hi Vision full body harness
EN 361, EN 1497
Ref. no.:
AB 110 09
3
1
1
2
MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
ADJUSTING BUCKLE
1
2
dorsal
front EN 361
3
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
EN 361
rescue
ADJUSTABLE THIGH STRAP
EN 1497
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1460 g
XXL
1600 g
RESCUE ATTACHMENT POINT
3
EN 361
EN 361
EN 1497
Dorsal attachment D-ring
Front attachment point
Rescue attachment point
90
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
NEW
P 35CR HV
Hi Vision full body harness
EN 361, EN 1497
Ref. no.:
AB 135 09
1 SPECIAL FEATURES
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
3
MANUFACTURE
ADJUSTING BUCKLE
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front EN 361
EN 361
2 3
AL
rescue
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
EN 1497
AUTOMATIC ALUMINIUM BUCKLE ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1100 g
XXL
1160 g
RESCUE ATTACHMENT POINT
3
EN 361
EN 361
EN 1497
Dorsal attachment D-ring
Front attachment point
Rescue attachment point
Full body harnesses, protective clothing
2
91
NEW
P 40 HV
Hi Vision full body harness
EN 361
Ref. no.:
AB 140 09
1 SPECIAL FEATURES ADJUSTING BUCKLE
2
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
2 MANUFACTURE
CONNECTING AND ADJUSTING BUCKLE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
2
1
2
dorsal
front EN 361
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1050 g
XXL
1200 g
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
92
2X EN 361
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
NEW
P 42 HV
Hi Vision full body harness
EN 361, EN 358
Ref. no.:
AB 142 09
1
SPECIAL FEATURES
ADJUSTING BUCKLE
2
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
2
CONNECTING AND ADJUSTING BUCKLE
MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
3
1
2
dorsal
front EN 361
2X EN 361
3
ADJUSTABLE THIGH STRAP
waist EN 358
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1530 g
XXL
1750 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
Full body harnesses, protective clothing
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
3
2
93
NEW
P 87R HV
Hi Vision full body harness
EN 361, EN 358, EN 1497
Ref. no.:
AB 187 09
SPECIAL FEATURES
3
ADAPTED TO COOPERATE WITH A TWO-POINT HITCH AT 300
1 MANUFACTURE
2
4 4
Webbing:
polyester 45mm
Buckles:
automatic aluminium galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front EN 361
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
EN 361
3
4 waist
rescue
AUTOMATIC ADJUSTING BUCKLE
EN 358
EN 1497
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
RESCUE
3
VERSION
WEIGHT
M - XL
2540 g
XXL
2750 g
BELT
4
EN 361
EN 361
EN 1497
EN 358
Dorsal attachment D-ring
Front attachment point
Rescue loops
Work positioning belt with side attachment buckles
94
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 30HV+
Hi Vision full body harness
EN 361
Ref. no.:
AB 130 04
1 MANUFACTURE
ADJUSTING BUCKLE
2
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
2
DORSAL ATTACHMENT POINT
1
VERSION
WEIGHT
M - XL
1000 g
XXL
1600 g
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
FRONT ATTACHMENT POINT
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2
95
P 50HV+
Full body harness
EN 361, EN 358
Ref. no.:
AB 150 04
1 MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
2 NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front
3 3
3 waist
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
DORSAL ATTACHMENT POINT
1
FRONT ATTACHMENT POINT
2
VERSION
WEIGHT
M - XL
1460 g
XXL
1600 g
BELT
3
EN 361
EN 361
EN 358
Dorsal attachment D-ring
Front attachment point
Work positioning belt with side attachment buckles
96
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
KB 020 EN 361
Overalls with full body harness Ref. no.:
KB 020
ADJUSTABLE CHEST STRAP
DORSAL ATTACHMENT POINT
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
Overalls integrated with full body harness. Made from high-quality polyester and cotton fabric by KLOPMAN. Full body harness is sewn up inside the overalls with dorsal attachment D-ring brought out.
VARIOUS FABRICS AND COLOURS ON REQUEST OVERALLS AVAILABLE ALSO IN REFLECTIVE VERSION. COLOUR VERSION
Material:
HV fabric: 85% Polyester, 15% Cotton other fabrics: 65% Polyester, 35% Cotton
Weight:
350 g
HV orange Ash-gray
Full body harnesses, protective clothing
2
97
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
KB 040
SOFTSHELL HIGH VISIBLE jacket with full body harness P 11 or P 11C
EN361
Ref. no.:
KB 040
FRONT ATTACHMENT POINT
3
LAYER PROTECTION PROTECTS AGAINST WIND
PROTECTS AGAINST RAIN
TPU MEMBRANE MICROFLEECE BREATHES AND WICKS MOISTURE
KEEPS WARMTH
P 11C - FULL BODY HARNESS
DORSAL ATTACHMENT POINT
MANUFACTURE
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
Material:
97% Polyester, 3% Elastane
Weight:
350 g
SIZES
REFLECTIVE TAPES
SIZE
HEIGHT
M
176-179 cm
83-94 cm
L
179-182 cm
95-102 cm
XL
182-185 cm
103-112 cm
CHEST CIRCUMFERENCE
Softshell jacket equipped with full body harness P11 or P11C (automatic buckles). Harness can be released easily. The jacket is made of firmly woven fabric providing an excellent protection against wind blows. The applied technology ensures windproofness, water tightness and breathability. Thanks to the above the jacket provides optimal protection while working with high intensity. The jacket is fitted with full-length zipper, chin protection and a single front and two side pockets. Sleeve cuffs are adjustable with strong Velcro fasteners.
98
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
SOFTSHELL FABRIC
WITH BREATHABLE MEMBRANE
CONCEALABLE HARNESS
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
Full body harnesses, protective clothing
2
99
KB 041, KB 042
SOFTSHELL jacket with full body harness P 11 or P 11C
EN361
Ref. no.:
KB 041, KB 042
FRONT ATTACHMENT POINT
P 11C - FULL BODY HARNESS
DORSAL ATTACHMENT POINT
MANUFACTURE
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
Material:
97% Polyester, 3% Elastane
Weight:
350 g
SIZES
Softshell jacket equipped with full body harness P11 or P11C (automatic buckles). Harness can be released easily. The jacket is made of firmly woven fabric providing an excellent protection against wind blows. The applied technology ensures windproofness, water tightness and breathability. Thanks to the above the jacket provides optimal protection while working with high intensity. The jacket is fitted with full-length zipper, chin protection and a single front and two side pockets. Sleeve cuffs are adjustable with strong Velcro fasteners.
SIZE
HEIGHT
M
176-179 cm
83-94 cm
L
179-182 cm
95-102 cm
XL
182-185 cm
103-112 cm
CHEST CIRCUMFERENCE
VERSION JACKET KB041 + P11 JACKET KB041 + P11 C JACKET KB042 + P11 JACKET KB042 + P11C
100
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
P 04
Harness with vest
EN 361
Ref. no.:
AB 104 01
1
MANUFACTURE
Webbing:
polyester 45 mm
Buckles:
galvanized steel
Threads:
polyester
NUMBER OF ATTACHMENT POINTS
1
2
dorsal
front EN 361
2 EN 361
FULL BODY HARNESSES, PROTECTIVE CLOTHING
ADJUSTABLE THIGH STRAP
COLOUR VERSION HV yellow/green HV orange
DORSAL ATTACHMENT POINTS
1
FRONT ATTACHMENT POINTS
2
EN 361
EN 361
Dorsal attachment D-ring
Front attachment point
Full body harnesses, protective clothing
2 101
VS 010
Protective vest with reflective tapes Ref. no.:
VS 010
MANUFACTURE Material:
85% Polyester, 15% Cotton
Weight:
0,60 kg
Size:
waist 80-110 cm
Compatibility:
P-01, P-01S, P-02, P-02S, P-10, P-20, P-30, P-30N, P-50, P-51E, P-60, P-61, P-61E
Reflective tape width:
40 mm and 30 mm
COLOUR VERSION HV yellow/green HV orange
VS 011
Protective vest with reflective tapes Ref. no.:
VS 011 SPECIAL FEATURES
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE
Material:
100% Polyester
Weight:
0,30 kg
Size:
waist 100-130 cm
Reflective tape width:
30 mm
COLOUR VERSION HV orange HV yellow/green Red Green Dark blue Black
102
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
VS 012
Protective vest with reflective tapes Ref. no.:
VS 012
MANUFACTURE
Material:
100% Polyester
Weight:
0,30 kg
Size:
L-XL
Reflective tape width:
50 mm
COLOUR VERSION HV orange HV yellow/green Red Green Dark blue Black
Protective vest with reflective tapes Ref. no.:
VS 020
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
VS 020
MANUFACTURE
Material
65% Polyester, 35% Cotton
Weight:
0,62 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-02, P-02S, P-10, P-20, P-30,P-40, P-50, P-51E, P-60, P-61, P-61E
COLOUR VERSION HV orange HV yellow/green Red Green Dark blue Black
Full body harnesses, protective clothing
2 103
VS 030
Vest for full body harness Ref. no.:
VS 030
MANUFACTURE Material
65% Polyester, 35% Cotton
Weight:
0,60 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-02, P-02S, P-10, P-20, P-30, P-30N, P-50, P-51E, P-60, P-61, P-61E
COLOUR VERSION HV orange HV yellow/green Red Green Dark blue Black
VS 031
Vest for full body harness Ref. no.:
VS 031
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2 MANUFACTURE
Material
65% Polyester, 35% Cotton
Weight:
0,60 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-02, P-02S, P-10, P-20, P-30, P-30N, P-50, P-51E, P-60, P-61, P-61E
COLOUR VERSION HV orange HV yellow/green Red Green Dark blue Black
104
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
VS 032
Vest for full body harness
EN 471
Ref. no.:
VS 032
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
MANUFACTURE Material
65% Polyester, 35% Cotton
Weight:
0,60 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-02, P-02S, P-10, P-20, P-30, P-30N, P-50, P-51E, P-60, P-61, P-61E
COLOUR VERSION HV orange HV yellow/green Red Green Dark blue Black
Vest for full body harness Ref. no.:
VS 041
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
VS 041
MANUFACTURE
Material
65% Polyester, 35% Cotton
Weight:
0,60 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-02, P-02S, P-10, P-20, P-30, P-30N, P-50, P-51E, P-60, P-61, P-61E
COLOUR VERSION HV orange HV yellow/green Red Green Dark blue Black
Full body harnesses, protective clothing
2 105
VS 042
Vest for full body harness Ref. no.:
VS 042
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
MANUFACTURE Material
85% Polyester, 15% Cotton
Weight:
0,60 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-03, P-10, P-30, P-30N
106
2
Full body harnesses, protective clothing
COLOUR VERSION HV orange HV yellow/green
WWW.PROTEKT.COM.PL
VS 050
Vest for full body harness Ref. no.:
VS 050
MANUFACTURE Material:
85% Polyester, 15% Cotton
Weight:
0,60 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-01B, P-10, P-30, P-30N,
Reflective tape width:
40 mm
COLOUR VERSION HV orange HV yellow/green
Vest for full body harness Ref. no.:
VS 051
2
MANUFACTURE
Material:
85% Polyester, 15% Cotton
Weight:
0,60 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-01B, P-10, P-30, P-30N,
Reflective tape width:
40 mm
COLOUR VERSION
NET PRICE
HV orange
125,00
HV yellow/green
125,00
Full body harnesses, protective clothing
2 107
FULL BODY HARNESSES, PROTECTIVE CLOTHING
VS 051
VS 070
Vest for full body harness Ref. no.:
VS 070
ADDITIONAL BACK POCKETS
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
Material in accordance with the following standards: EN 532, EN 367, EN 366, EN 373 – resistance to aluminium filings (780°C), resistance to iron filings (1400°C).
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
MANUFACTURE
Material
65% Polyester, 35% Cotton
Weight:
0,60 kg
Size: Compatibility:
L-XL P-01, P-01S, P-02, P-02S, P-10, P-20, P-50,P-60, P-61
COLOUR VERSION HV orange GRAY
108
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
VS 080
Vest for full body harness Ref. no.:
VS 080
FULL BODY HARNESSES, PROTECTIVE CLOTHING
2
COLOUR VERSION HV orange
MANUFACTURE
HV yellow/green Red
Material
85% Polyester, 15% Cotton
Weight:
0,70 kg
Size:
L-XL
Compatibility:
P-01, P-01S, P-10, P-30, P-30N, P-40
Green Dark blue Black
Full body harnesses, protective clothing
2 109
VS 200
Protective vest with reflective tapes
EN 340, EN 531, EN 1149-5
Ref. no.:
VS 200
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Warning vest, flame-retardant, anti-static, type VS 200, made from acrylic fabric XISPAL 827 RS HV ANTIESTATICO, HV yellow/green. Reflective flame-retardant tapes, 50mm wide, Ref. No. RETROLUX FLR 600. Vest snapped with four snap fasteners at front, covered with placket.
2 FULL BODY HARNESSES, PROTECTIVE CLOTHING
Rolled up and stitched lower section. Along its perimeter the vest has a single reflective tape sewn up horizontally on the waist at the front, running through shoulders, and two diagonal tapes at the back. The vest holds EC Type Examination Certificate
MANUFACTURE Size:
L-XL
HV yellow/green
110
2
Full body harnesses, protective clothing
WWW.PROTEKT.COM.PL
Energy absorbers and lanyards AW - energy absorbers with lanyard
3-2
ABM - energy absorbers with lanyard
3-9
ABM SCF - energy absorbers with lanyard for work on scaffolds
3 - 29
Lanyards
3 - 35
3
AW170/LB100
Energy absorber with adjustable lanyard
EN 355
Ref. no.:
AW170/LB100
2
1
SPECIAL FEATURES
PARAMETERS
Protection up to 140 Kg
LANYARD Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
12 mm
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ENERGY ABSORBER
3
Manufacture:
polyamide webbing
Dimensions:
300x40x50 mm
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
1
2 Ref. no. AW170/LB100/2AZ011
ENERGY ABSORBERS AND LANYARDS
Energy absorber AW 170 with lanyard LB 100 and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
Ref. no. AW170/LB100/AZ002/AZ029
2,0 m
nr kat. AW170/LB100/2AZ002 Energy absorber AW 170 with lanyard LB 100 and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
Energy absorber AW 170 with lanyard LB 100 and connectors AZ 002 (galvanized steel, opening 19mm), AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
nr kat. AW170/LB100/AZ003/AZ029
2,0 m
Ref. no. AW170/LB100/2AZ002 Energy absorber AW 170 with lanyard LB 100 and connectors 2 x AZ 003 (aluminium, opening 20mm)
2
Energy absorber AW 170 with lanyard LB 100 and connectors AZ 003 (aluminium, opening 20mm), AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. AW170/LB100
2,0 m
Energy absorber AW 170 with lanyard LB 100. WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
2
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
AW170/LB101
Energy absorber with lanyard
EN 355
Ref. no.:
AW170/LB101
2
1
SPECIAL FEATURES
PARAMETERS
Protection up to 140 Kg
ENERGY ABSORBER
Material:
polyester
Manufacture:
polyamide webbing
Manufacture:
kernmantle lanyard
Dimensions:
300x40x50 mm
Diameter:
10,5 mm
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
1 Ref. no. AW170/LB101/2AZ011 Energy absorber AW 170 with lanyard LB 100 and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2 Ref. no. AW170/LB101/AZ002/AZ029
2,0 m
Energy absorber AW 170 with lanyard LB 101 and connectors AZ 002 (galvanized steel, opening 19mm), AZ 029 (galvanized steel, plastic, opening 50mm)
Ref. no. AW170/LB101/2AZ002
Ref. no. AW170/LB101/AZ003/AZ029
Energy absorber AW 170 with lanyard LB 101 and connectors 2 x AZ 002 2,0 m (galvanized steel, opening 19mm)
Energy absorber AW 170 with lanyard LB 101 and connectors AZ 003 (aluminium, opening 20mm), AZ 029 (galvanized steel, plastic, opening 50mm)
Ref. no. AW170/LB101/2AZ003
Ref. no. AW170/LB101
Energy absorber AW 170 with lanyard LB 100 and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
3
2,0 m
Energy absorber AW 170 with lanyard LB 101. WITHOUT CONNECTORS
ENERGY ABSORBERS AND LANYARDS
LANYARD
2,0 m
2,0 m
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
3
AW170/LB102
Energy absorber with twin-tail lanyard
EN 355
Ref. no.:
AW170/LB102
3
2
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS
LANYARD Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
12 mm
1
2
NEW CONNECTOR AZ 029
3 Ref. no. AW170/LB102/3AZ011 Energy absorber AW 170 with twin-tail lanyard LB 102 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
ENERGY ABSORBER
3
Manufacture:
polyamide webbing
Dimensions:
300x40x50 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ENERGY ABSORBERS AND LANYARDS
Protection up to 140 Kg
Ref. no. AW170/LB102/AZ002/2AZ029 Energy absorber AW 170 with twin-tail lanyard LB 102 and connectors AZ 002 (galvanized steel, opening 19mm), 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. AW170/LB102/AZ003/2AZ029 Energy absorber AW 170 with twin-tail lanyard LB 102 and connectors AZ 003 (aluminium, opening 20mm), 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. AW170/LB102/AZ002/2AZ025 Energy absorber AW 170 with twin-tail lanyard LB 102 and connectors AZ 002 (galvanized steel, opening 19mm), 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. no. AW170/LB102/AZ003/2AZ024 Energy absorber AW 170 with twin-tail lanyard LB 102 and connectors AZ 003 (aluminium, opening 20mm), 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no. AW170/LB102 Energy absorber AW 170 with twin-tail lanyard LB 102. WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
4
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
AW170/LE111
Energy absorber with elastic lanyard
EN 355
Ref. no.:
AW170/LE111
PARAMETERS
2
LANYARD
loop for connector
ENERGY ABSORBER
Material:
polyester
Manufacture:
polyamide webbing
Manufacture:
polyamide webbing
Dimensions:
300x40x50 mm
Diameter:
28 mm
SPECIAL FEATURES
Protection up to 140 Kg

AVAILABLE COLOR VERSIONS
PRODUCT PRESENTATION protekt.co/aw170le111
yellow
blue
red
black
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
Ref. no. AW170/LE111/2AZ011
elastic webbing, 100% polyester
Energy absorber AW 170 with elastic lanyard LE 111 and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. AW170/LE111/2AZ002 Energy absorber AW 170 with elastic lanyard LE 111 and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
3
Ref. no. AW170/LE111/2AZ003 Energy absorber AW 170 with elastic lanyard LE 111 and connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
2
ENERGY ABSORBERS AND LANYARDS
1
Ref. no. AW170/LE111/AZ002/AZ029 Energy absorber AW 170 with elastic lanyard LE 111 and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. AW170/LE111/AZ003/AZ029 Energy absorber AW 170 with elastic lanyard LE 111 and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
energy absorber AW170
2,0 m
Ref. no. AW170/LE111 Energy absorber AW 170 with elastic lanyard LE 111 WITHOUT CONNECTORS
loop for connector
1
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
5
AW170/2LE111
Energy absorber with elastic twin-tail lanyard
EN 355
Ref. no.:
AW170/2LE111
PARAMETERS 2
3 LANYARD loop for connector
ENERGY ABSORBER
Material:
polyester
Manufacture:
polyamide webbing
Manufacture:
kernmantle lanyard
Dimensions:
300x40x50 mm
Diameter:
28 mm
SPECIAL FEATURES
Protection up to 140 Kg AVAILABLE COLOUR VERSIONS
yellow
blue
red
black
DEVICE STANDARD CONFIGURATIONS
1
2
NEW CONNECTOR AZ 029
3
Ref. no. AW170/2LE111/3AZ011
elastic webbing, 100% polyester
Energy absorber AW 170 with elastic twin-tail lanyard 2 LE 111 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. AW170/2LE111/AZ002/2AZ029
3
Energy absorber AW 170 with elastic twin-tail lanyard 2 LE 111 and connectors AZ 002, 2 x AZ 029 (galvanized steel, opening 18mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)

PRODUCT PRESENTATION
Ref. no. AW170/2LE111/AZ003/2AZ029 Energy absorber AW 170 with elastic twin-tail lanyard 2 LE 111 and connectors AZ 003, 2 x AZ 029, AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
protekt.co/aw1702le111
ENERGY ABSORBERS AND LANYARDS
2,0 m
2,0 m
Ref. no. AW170/2LE111/AZ002/2AZ025 Energy absorber AW 170 with elastic twin-tail lanyard 2 LE 111 and connectors AZ 002, 2 x AZ 025 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. no. AW170/2LE111/AZ003/2AZ024 Energy absorber AW 170 with elastic twin-tail lanyard 2 LE 111 and connectors AZ 003, 2 x AZ 024, AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
energy absorber AW170
2,0 m
Ref. no. AW170/2LE111 Energy absorber AW 170 with elastic twin-tail lanyard 2 LE 111 WITHOUT CONNECTORS
loop for connector
1
6
3
Energy absorbers and lanyards
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
WWW.PROTEKT.COM.PL
AW170/LE211 FLR
Heat-resistant energy absorber with elastic lanyard Ref. no.:
AW170/LE211FLR
2
PARAMETERS LANYARD
ENERGY ABSORBER
Material:
aramid
Manufacture:
polyamide webbing
Manufacture:
aramid webbing
Dimensions:
300x40x50 mm
Width
28 mm
SPECIAL FEATURES
Protection up to 140 Kg
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
DEVICE STANDARD CONFIGURATIONS 1
NEW CONNECTOR AZ 029
2
Ref. no. AW170/LE211FLR/2AZ011
elastic aramid webbing
Energy absorber AW 170 with elastic lanyard LE 211 FLR and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. AW170/LE211FLR/2AZ002 Energy absorber AW 170 with elastic lanyard LE 211 FLR and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
3
Ref. no. AW170/LE211FLR/2AZ003 Energy absorber AW 170 with elastic lanyard LE 211 FLR and connectors 2 x AZ 003 (aluminium, opening 20mm) 1
2,0 m
2
Energy absorber AW 170 with elastic lanyard LE 211 FLR and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
Ref. no. AW170/LE211FLR/AZ002/AZ029 2,0 m
Ref. no. AW170/LE211FLR/AZ003/AZ029 Energy absorber AW 170 with elastic lanyard LE 211 FLR and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
energy absorber AW170
Ref. no. AW170/LE211FLR Energy absorber AW 170 with elastic lanyard LE 211 FLR without connectors
loop for connector
2,0 m
1
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
7
AW170/2LE211 FLR
Heat-resistant energy absorber with elastic twin-tail lanyard Ref. no.:
2
AW170/2LE211FLR
3 PARAMETERS
loop for connector
LANYARD
ENERGY ABSORBER
Material:
aramid
Manufacture:
polyamide webbing
Manufacture:
aramid webbing
Dimensions:
300x40x50 mm
Diameter:
28 mm
SPECIAL FEATURES
Protection up to 140 Kg
elastic aramid webbing
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
DEVICE STANDARD CONFIGURATIONS
1
2
NEW CONNECTOR AZ 029
3 Ref. AW170/2LE211FLR/3AZ011 Energy absorber AW 170 with elastic twin-tail lanyard 2LE 211 FLR and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. AW170/2LE211FLR/AZ002/2AZ029 Energy absorber AW 170 with elastic twin-tail lanyard 2LE 211 FLR and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
3
2,0 m
Ref. AW170/2LE211FLR/AZ003/2AZ029
ENERGY ABSORBERS AND LANYARDS
Energy absorber AW 170 with elastic twin-tail lanyard 2LE 211 FLR and connectors AZ 003 (galvanized steel, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. AW170/2LE211FLR/AZ002/2AZ025
energy absorber AW170
Energy absorber AW 170 with elastic twin-tail lanyard 2LE 211 FLR and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. AW170/2LE211FLR/AZ003/2AZ024 Energy absorber AW 170 with elastic twin-tail lanyard 2LE 211 FLR WITHOUT CONNECTORS
2,0 m
Ref. AW170/2LE211FLR Energy absorber AW 170 with elastic twin-tail lanyard 2LE 211 FLR WITHOUT CONNECTORS
loop for connector
8
3
1
Energy absorbers and lanyards
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
WWW.PROTEKT.COM.PL
ABM/LB100
Energy absorber with adjustable lanyard
EN 355
Ref. no.:
BW200/LB100
2
1
PARAMETERS
NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
LANYARD
1
2
Material:
polyester
Manufacture:
kernmantle lanyard
Ref. BW200/LB100/2AZ011
Diameter:
28 mm
Energy absorber with lanyard LB 100 and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
ENERGY ABSORBER Manufacture:
polyamide webbing
Dimensions:
300x40x50 mm
Ref. BW200/LB100/2AZ002 Energy absorber ABM with lanyard LB 100 and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
3
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Ref. BW200/LB100/2AZ003 Energy absorber ABM with lanyard LB 100 and connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
VG11 11.074
for use in the vertical where fall over the edge may occur
R 0,5 mm
for profiles of radius r 0.5mm without sharp edges
Energy absorber ABM with lanyard LB 100 and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
Ref. BW200/LB100/AZ002/AZ029
2,0 m
Ref. BW200/LB100/AZ003/AZ029 Energy absorber ABM with lanyard LB 100 and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. BW200/LB100 Energy absorber ABM with adjustable lanyard LB 100 WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
9
ABM/2LB100
Energy absorber with adjustable twin-tail lanyard
EN 355
Ref. no.:
BW200/2LB100
3 2
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS
LANYARD
1
2
NEW CONNECTOR AZ 029
3
Material:
polyester
Manufacture:
kernmantle lanyard
Ref. no.BW200/2LB100/3AZ011
Diameter:
12 mm
Energy absorber ABM with adjustable lanyard 2 LB 100 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
ENERGY ABSORBER
3
Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
Energy absorber ABM with adjustable lanyard 2 LB 100 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ENERGY ABSORBERS AND LANYARDS
Ref. no. BW200/2LB100/AZ002/2AZ029
Ref. no.BW200/2LB100/AZ003/2AZ029 Energy absorber ABM with adjustable lanyard LB 100 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/2LB100/AZ002/2AZ025 Energy absorber ABM with adjustable lanyard 2 LB 100 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
VG11 11.074
for use in the vertical where fall over the edge may occur
2,0 m
R 0,5 mm
for profiles of radius r 0.5mm without sharp edges
Ref. no. BW200/2LB100/AZ003/2AZ024 Energy absorber ABM with adjustable lanyard LB 100 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
nr kat. BW200/2LB100 Energy absorber ABM with adjustable safety lanyard 2 LB 100 WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
10
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
ABM/LB101
Energy absorber with lanyard
EN 355
Ref. no.:
BW200/LB101

ENERGY ABSORBER TESTED IN LABORATORY protekt.co/abmlb101lab
1 SPECIAL FEATURES
PARAMETERS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
LANYARD Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
10,5 mm
ENERGY ABSORBER Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
DEVICE STANDARD CONFIGURATIONS 1
NEW CONNECTOR AZ 029
2
Ref. no. BW200/LB101/2AZ011 Energy absorber ABM with lanyard LB 101 and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW200/LB101/2AZ002 Energy absorber ABM with lanyard LB 101 and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
3
Ref. no. BW200/LB101/2AZ003 Energy absorber ABM with lanyard LB 101 and connectors 2 x AZ 003 (aluminium, opening 20mm) 1
2,0 m
2
Ref. no. BW200/LB101/AZ002/AZ029 Energy absorber ABM with lanyard LB 101 and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
2
2,0 m
Ref. no. BW200/LB101/AZ003/AZ029 Energy absorber ABM with lanyard LB 101 and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/LB101 Energy absorber ABM with lanyard LB 101 WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
11
ABM/LB102
Energy absorber with twin-tail lanyard
EN 355
Ref. no.:
BW200/LB102
3 2
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS 1
LANYARD Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
10,5 mm
2
NEW CONNECTOR AZ 029
3
Ref. no. BW200/LB102/3AZ011 Energy absorber ABM with lanyard LB 102 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
ENERGY ABSORBER
3
Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
Ref. no. BW200/LB102/AZ002/2AZ029 Energy absorber ABM with lanyard LB 102 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
SPECIAL FEATURES Ref. no. BW200/LB102/AZ003/2AZ029
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Energy absorber ABM with lanyard LB 102 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
ENERGY ABSORBERS AND LANYARDS
Ref. no. BW200/LB102/AZ002/2AZ025 Energy absorber ABM with lanyard LB 102 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. no. BW200/LB102/AZ003/2AZ024 Energy absorber ABM with lanyard LB 102 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no. BW200/LB102 Energy absorber ABM with lanyard LB 102 WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
12
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
ABM/LB200 FLR
Heat-resistant energy absorber with adjustable lanyard
EN 355
Ref. no.:
BW200/LB200 2
1
ARAMID KERNMANTLE LANYARD
energy absorber BW 200
DEVICE STANDARD CONFIGURATIONS
PARAMETERS
1
LANYARD Material:
aramid
Manufacture:
aramid kernmantle lanyard
Diameter:
11,4 mm
NEW CONNECTOR AZ 029
2
Ref. no. BW200/LB200FLR/2AZ011 Energy absorber ABM with lanyard LB 200 FLR and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
ENERGY ABSORBER polyamide webbing
Dimensions:
200x32x45 mm
Ref. no. BW200/LB200FLR/2AZ002 Energy absorber ABM with lanyard LB 200 FLR and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
SPECIAL FEATURES RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
2,0 m
3
Ref. no. BW200/LB200FLR/2AZ003 Energy absorber ABM with lanyard LB 200 FLR and connectors 2 x AZ 003 (aluminium, opening 20mm) 1
2,0 m
2
Ref. no. BW200/LB200FLR/AZ002/AZ029 Energy absorber ABM with lanyard LB 200 FLR and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
Manufacture:
2,0 m
Ref. no. BW200/LB200FLR/AZ003/AZ029 Energy absorber ABM with lanyard LB 200 FLR and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/LB200FLR Energy absorber ABM with lanyard LB 200 FLR WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
13
ABM/LB201 FLR
Heat-resistant energy absorber with adjustable lanyard
EN 355
Ref. no.:
BW200/LB201
2
1
ARAMID KERNMANTLE LANYARD
energy absorber BW 200
DEVICE STANDARD CONFIGURATIONS
PARAMETERS
LANYARD Material:
aramid
Manufacture:
aramid kernmantle lanyard
Diameter:
11,4 mm
1
NEW CONNECTOR AZ 029
2
Ref. no. BW200/LB201FLR/2AZ011 Energy absorber ABM with lanyard LB 200 FLR and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
ENERGY ABSORBER
3
Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
Ref. no. BW200/LB201FLR/2AZ002 Energy absorber ABM with lanyard LB 200 FLR and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
SPECIAL FEATURES Ref. no. BW200/LB201FLR/2AZ003
ENERGY ABSORBERS AND LANYARDS
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
Energy absorber ABM with lanyard LB 200 FLR and connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
Ref. no. BW200/LB201FLR/AZ002/AZ029 Energy absorber ABM with lanyard LB 200 FLR and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/LB201FLR/AZ003/AZ029 Energy absorber ABM with lanyard LB 200 FLR and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/LB201FLR Energy absorber ABM with lanyard LB 200 FLR WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
14
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
ABM/LB202 FLR
Heat-resistant energy absorber with twin-tail lanyard
EN 355
Ref. no.:
BW200/2LB202
3
2 ARAMID KERNMANTLE LANYARD
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS
LANYARD Material:
aramid
Manufacture:
aramid kernmantle lanyard
Diameter:
11,4 mm
1
2
NEW CONNECTOR AZ 029
3
Ref. no. BW200/LB202/3AZ011 Energy absorber ABM with adjustable twin-tail lanyard LB 202 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
ENERGY ABSORBER Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
Ref. no. BW200/LB202/AZ002/2AZ029 Energy absorber ABM with lanyard LB 202 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
3
SPECIAL FEATURES Ref. no. BW200/LB202/AZ003/2AZ029 Energy absorber ABM with lanyard LB 202 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
ENERGY ABSORBERS AND LANYARDS
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
Ref. no. BW200/LB202/AZ002/2AZ025 Energy absorber ABM with lanyard LB 202 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. no. BW200/LB202/AZ003/2AZ024 Energy absorber ABM with lanyard LB 202 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no. BW200/LB202 Energy absorber ABM with adjustable twin-tail lanyard LB 202 WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
15
ABM/2LB200 FLR
Heat-resistant energy absorber with adjustable twin-tail lanyard
EN 355
Ref. no.:
BW200/2LB200 3
2
energy absorber BW 200 connected to lanyards by a ring
ARAMID KERNMANTLE LANYARD
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS
LANYARD Material:
aramid
Manufacture:
aramid kernmantle lanyard
Diameter:
11,4 mm
ENERGY ABSORBER
3
Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
1
2
NEW CONNECTOR AZ 029
3
Ref. no. BW200/2LB200/3AZ011 Energy absorber ABM with adjustable twin-tail lanyard 2 LB 200 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW200/2LB200/AZ002/2AZ029 Energy absorber ABM with lanyard 2 LB 200 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
SPECIAL FEATURES Ref. no. BW200/2LB200/AZ003/2AZ029
ENERGY ABSORBERS AND LANYARDS
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
Energy absorber ABM with lanyard 2 LB 200 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/2LB200/AZ002/2AZ025 Energy absorber ABM with lanyard 2 LB 200 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. no. BW200/2LB200/AZ003/2AZ024 Energy absorber ABM with lanyard 2 LB 200 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no. BW200/2LB200 Energy absorber ABM with adjustable twin-tail lanyard 2 LB 200 WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
16
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
ABM/LE111
Energy absorber with elastic lanyard
EN 355
Ref. no.:
loop for connector
BW200/LE111
2 PARAMETERS
ENERGY ABSORBER
LANYARD Material:
polyester
Manufacture:
polyamide webbing
Manufacture:
polyester webbing
Dimensions:
200x32x45 mm
Diameter:
28 mm
AVAILABLE COLOR VERSIONS
yellow
blue
red
black
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
Ref. no. BW200/LE111/2AZ011 Energy absorber ABM with lanyard LE 111 and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW200/LE111/2AZ002 Energy absorber ABM with lanyard LE 111 and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
elastic webbing, 100% polyester
3
Ref. no. BW200/LE111/2AZ003 v Energy absorber ABM with lanyard LE 111 and connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
Energy absorber ABM with lanyard LE 111 and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
Ref. no. BW200/LE111/AZ002/AZ029 2,0 m
Ref. no. BW200/LE111/AZ003/AZ029 Energy absorber ABM with lanyard LE 111 and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
energy absorber ABM
Ref. no.BW200/LE111 Energy absorber ABM with lanyard LE 111 WITHOUT CONNECTORS
loop for connector
2,0 m
1
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
17
ABM/2LE111
Energy absorber with elastic twin-tail lanyard
EN 355
Ref. no.:
2
BW200/2LE111
3 PARAMETERS
loops for connector
ENERGY ABSORBER
LANYARD Material:
polyester
Manufacture:
polyamide webbing
Manufacture:
polyester webbing
Dimensions:
200x32x45 mm
Diameter:
28 mm
AVAILABLE COLOUR VERSIONS
yellow
blue
red
black
DEVICE STANDARD CONFIGURATIONS
1
2
NEW CONNECTOR AZ 029
3
Ref. no.BW200/2LE111/3AZ011 Energy absorber ABM with twin-tail lanyard 2 LE 111 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no.BW200/2LE111/AZ002/2AZ029 Energy absorber ABM with twin-tail lanyard 2 LE 111 and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
3
elastic webbing, 100% polyester
2,0 m
Ref. no.BW200/2LE111/AZ003/2AZ029 Energy absorber ABM with twin-tail lanyard 2 LE 111 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no.BW200/2LE111/AZ002/2AZ025
ENERGY ABSORBERS AND LANYARDS
Energy absorber ABM with twin-tail lanyard 2 LE 111 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no. BW200/2LE111/AZ003/2AZ024 Energy absorber ABM with twin-tail lanyard 2 LE 111 and connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
energy absorber ABM
loop for connector
18
3
2,0 m
Ref. no. BW200/2LE111 Energy absorber ABM with twin-tail lanyard 2 LE 111 WITHOUT CONNECTORS
1
Energy absorbers and lanyards
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
WWW.PROTEKT.COM.PL
ABM/LE211 FLR
Heat-resistant energy absorber with elastic lanyard
EN 355
Ref. no.:
NEW
BW200/LE211
2
PARAMETERS ENERGY ABSORBER
LANYARD Material:
aramid
Manufacture:
polyamide webbing
Manufacture:
aramid webbing
Dimensions:
200x32x45 mm
Diameter:
28 mm
SPECIAL FEATURES RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
DEVICE STANDARD CONFIGURATIONS 1
NEW CONNECTOR AZ 029
2
Ref. no. ABM/LE211/2AZ011 Energy absorber ABM with elastic lanyard LE 211 and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. ABM/LE211/2AZ002 Energy absorber ABM with elastic lanyard LE 211 and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
3
Ref. no. ABM/LE211/2AZ003 Energy absorber ABM with elastic lanyard LE 211 and connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
Energy absorber ABM with elastic lanyard LE 211 and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
Ref. no. ABM/LE211/AZ002/AZ029 2,0 m
Ref. no. ABM/LE211/AZ003/AZ029 Energy absorber ABM with elastic lanyard LE 211 and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. ABM/LE211 Energy absorber ABM with elastic lanyard LE 211 without connectors
1
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
19
ABM/2LE211 FLR
Heat-resistant energy absorber with elastic twin-tail lanyard
EN 355
Ref. no.:
2
NEW
BW200/2LE211
3 PARAMETERS
LANYARD
ENERGY ABSORBER
Material:
aramid
Manufacture:
polyamide webbing
Manufacture:
aramid webbing
Dimensions:
200x32x45 mm
Diameter:
28 mm
SPECIAL FEATURES RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
DEVICE STANDARD CONFIGURATIONS
1
2
NEW CONNECTOR AZ 029
3 Ref. no. ABM/2LE211/3AZ011 Energy absorber ABM with elastic twin-tail lanyard 2LE 211 and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. ABM/2LE211/AZ002/2AZ029 Energy absorber ABM with elastic twin-tail lanyard 2LE 211 and connectors AZ 002, 2 x AZ 029 (galvanized steel, opening 18mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
3
2,0 m
Ref. no. ABM/2LE211/AZ003/2AZ029 Energy absorber ABM with elastic twin-tail lanyard 2LE 211 and connectors AZ 003, 2 x AZ 029, AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
ENERGY ABSORBERS AND LANYARDS
Ref. no. ABM/2LE211/AZ002/2AZ025 Energy absorber ABM with elastic twin-tail lanyard 2LE 211 and connectors AZ 002, 2 x AZ 025 AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. no. ABM/2LE211/AZ003/2AZ024 Energy absorber ABM with elastic twin-tail lanyard 2LE 211 and connectors AZ 003, 2 x AZ 024 AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no. ABM/2LE211 Energy absorber ABM with elastic twin-tail lanyard 2LE 211 WITHOUT CONNECTORS
1
20
3
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
MANUF
ABM-T
Energy absorber ABM-T
EN 355
Ref. no.:
FACTURE:
1
PARAMETERS
WEBBING
ENERGY ABSORBER
Manufacture:
polyester webbing
Manufacture:
polyamide webbing
Width::
30 mm
Dimensions:
200x32x45 mm
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
Ref. no. BW700/2AZ011 Energy absorber ABM-T with connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW700/2AZ002 Energy absorber ABM-T with connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
3
Ref. no. BW700/2AZ003 Energy absorber ABM-T with connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
Ref. no. BW700/AZ002/AZ029 Energy absorber ABM-T with connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
2
BW700
2,0 m
Ref. no. BW700/AZ003/AZ029 Energy absorber ABM-T with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW700 Energy absorber ABM-T WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
21
ABM-2T
Energy absorber ABM-2T
EN 355
Ref. no.:
BW800
DIMENSIONS
3
2
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS
WEBBING
1
Manufacture:
polyester webbing
Width::
30 mm
2
NEW CONNECTOR AZ 029
3
Ref. no.BW800/2T/3AZ011 Energy absorber ABM-2T with connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
ENERGY ABSORBER Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
Ref. no.BW800/2T/AZ002/2AZ029 Energy absorber ABM-2T with connectors AZ 002, 2 x AZ 029, AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
3
2,0 m
Ref. no.BW800/2T/AZ003/2AZ029 Energy absorber ABM-2T with connectors AZ 003, 2 x AZ 029, AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no.BW800/2T/AZ002/2AZ025
ENERGY ABSORBERS AND LANYARDS
Energy absorber ABM-2T with connectors ABM-2T AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
2,0 m
Ref. no.BW800/2T/AZ003/2AZ024 Energy absorber ABM-2T AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no.BW800/2T Energy absorber ABM-2T WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
22
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
Energy absorber with adjustable lanyard HV
EN 355
Ref. no.:
2
1
BW200/LB100HV
PARAMETERS
ENERGY ABSORBER
LANYARD Material:
polyester
Manufacture:
polyamide webbing
Manufacture:
kernmantle lanyard
Dimensions:
200x32x45 mm
Diameter:
28 mm
COLOUR VERSIONS
HV ORANGE
HV YELLOW/GREEN
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
Ref. no.BW200/LB100HV/2AZ011 Energy absorber with lanyard LB 100 HV and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no.BW200/LB100HV/2AZ002 Energy absorber ABM with lanyard LB 100 HV and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
2,0 m
3
Ref. no.BW200/LB100HV/2AZ003 Energy absorber ABM with lanyard LB 100 HV and connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
Ref. no.BW200/LB100HV/AZ002/AZ029 Energy absorber ABM with lanyard LB 100 HV and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
ENERGY ABSORBERS AND LANYARDS
S:
ABM/LB100 HV
2,0 m
Ref. no.BW200/LB100HV/AZ003/AZ029 Energy absorber ABM with lanyard LB 100 HV and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no.BW200/LB100HV Energy absorber ABM with lanyard LB 100 HV WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
23
ABM/LB101 HV
Energy absorber with lanyard HV
EN 355
BW200/LB101HV
Ref. no.:
1
2
PARAMETERS
LANYARD
ENERGY ABSORBER
Material:
polyester
Manufacture:
polyamide webbing
Manufacture:
kernmantle lanyard
Dimensions:
200x32x45 mm
Diameter:
10,5 mm
COLOUR VERSIONS
HV ORANGE
HV YELLOW/GREEN
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
Ref. no. BW200/LB101HV/2AZ011 Energy absorber ABM with lanyard LB 101 HV and connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW200/LB101HV/2AZ002 Energy absorber ABM with lanyard LB 101 HV and connectors 2 x AZ 002 (galvanized steel, opening 19mm)
3
2,0 m
Ref. no. BW200/LB101HV/2AZ003 Energy absorber ABM with lanyard LB 101 HV and connectors 2 x AZ 003 ( aluminium, opening 20mm)
2,0 m
Ref. no. BW200/LB101HV/AZ002/AZ029
ENERGY ABSORBERS AND LANYARDS
Energy absorber ABM with lanyard LB 101 HV and connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/LB101HV/AZ003/AZ029 Energy absorber ABM with lanyard LB 101 HV and connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/LB101HV Energy absorber ABM with lanyard LB 101 HV WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
24
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
ABM/LB102 HV
Energy absorber with twin tail lanyard HV
EN 355
Ref. no.:
BW200/LB102HV
3 2
1
DEVICE STANDARD CONFIGURATIONS
PRODUCT PRESENTATION
1
2
NEW CONNECTOR AZ 029
3
protekt.co/abmlb102hv Ref. no. BW200/LB102HV/3AZ011 Energy absorber ABM with twin-tail lanyard LB 102 HV and connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW200/LB102HV/AZ002/2AZ029 Energy absorber ABM with twin-tail lanyard LB 102 HV and connectors AZ 002, 2 x AZ 029, AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm) )
PARAMETERS
2,0 m
3
Ref. no. BW200/LB102HV/AZ003/2AZ029
Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
10,5 mm
ENERGY ABSORBER Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
2,0 m
Ref. no. BW200/LB102HV/AZ002/2AZ025 Energy absorber ABM with twin-tail lanyard LB 102 HV and connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
ENERGY ABSORBERS AND LANYARDS
LANYARD
Energy absorber ABM with twin-tail lanyard LB 102 HV and connectors AZ 003, 2 x AZ 029, AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW200/LB102HV/AZ003/2AZ024
COLOUR VERSIONS
Amortyzator bezpieczeństwa ABM z podwójną linką bezpieczeństwa LB 102 HV z zatrzaśnikami AZ 003 (aluminium, otwarcie 20 mm) 2 x AZ 024 (aluminium, otwarcie 100 mm)
2,0 m
Ref. no. BW200/LB102HV HV ORANGE
Energy absorber ABM with twin-tail lanyard LB 102 HV WITHOUT CONNECTORS
1,8 m
HV YELLOW/GREEN
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
25
ABM-T HV
Energy absorber with webbing HV
EN 355
Ref. no.:
2
PARAMETERS
1
BW700 HV
ENERGY ABSORBER
WEBBING Material:
polyester
Manufacture:
polyamide webbing
Width:
30 mm
Dimensions:
200x32x45 mm
POLYAMID AVAILABLE COLOUR VERSIONS
HV ORANGE
HV YELLOW/GREEN
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
Ref. no. BW700/2AZ011 HV Energy absorber ABM-T HV with connectors 2 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW700/2AZ002 HV Energy absorber ABM-T HV with connectors 2 x AZ 002 (galvanized steel, opening 19mm)
3
2,0 m
Ref. no. BW700/2AZ003 HV Energy absorber ABM-T HV with connectors 2 x AZ 003 (aluminium, opening 20mm)
2,0 m
Ref. no. BW700/AZ002/AZ029 HV
ENERGY ABSORBERS AND LANYARDS
Energy absorber ABM-T HV with connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW700/AZ003/AZ029 HV Energy absorber ABM-T HV with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW700 HV Energy absorber ABM-T HV WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
26
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
ABM-2T HV
Energy absorber with twin-tail webbing HV
EN 355
Ref. no.:
BW800 HV
3 2
DE WEBBING 1
PARAMETERS
WEBBING
DEVICE STANDARD CONFIGURATIONS
1
Material:
polyester
Width:
30 mm
ENERGY ABSORBER Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
2
NEW CONNECTOR AZ 029
3
Ref. no. BW800/3AZ011 Energy absorber ABM-2T HV with connectors 3 x AZ 011 (galvanized steel, opening 18mm)
2,0 m
Ref. no. BW800/AZ002/2AZ029
HV ORANGE
Ref. no. BW800/AZ003/2AZ029
HV YELLOW/GREEN
Energy absorber ABM-2T HV with connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
3 2,0 m
Ref. no. BW800/AZ002/2AZ025 Energy absorber ABM-2T HV with connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
ENERGY ABSORBERS AND LANYARDS
COLOUR VERSIONS
Energy absorber ABM-2T HV with connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. BW800/AZ003/2AZ024 Energy absorber ABM-2T HV with connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
2,0 m
Ref. no. BW800 Energy absorber ABM-2T HV WITHOUT CONNECTORS
1,8 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
27
ABM
Energy absorber
EN 355
Ref. no.:
BW 200
1
MANUFACTURE:
SPECIAL FEATURES
PARAMETERS
3
Manufacture:
polyamide webbing
Dimensions:
200x32x45 mm
Weight:
160 g
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
DEVICE STANDARD CONFIGURATIONS
NEW CONNECTOR AZ 029
1
ENERGY ABSORBERS AND LANYARDS
1
Ref. no. BW200/AZ011
nr kat. BW200/AZ029
Energy absorber ABM with connector AZ 011 (galvanized steel, opening 18mm)
Energy absorber ABM with connector AZ 029 (galvanized steel, plastic, opening 50mm)
Ref. no. BW200/AZ002
nr kat. BW200
Energy absorber ABM with connector AZ 002 (galvanized steel, opening 19mm)
Energy absorber ABM WITHOUT CONNECTORS
Ref. no. BW200/AZ003 Energy absorber ABM with connector AZ 003 (aluminium, opening 20mm)
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
28
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
BW 210
Energy absorber with lanyard for works on scaffolds ABM SCF
EN 355
Ref. no.:
BW210
1
PARAMETERS LANYARD
ENERGY ABSORBER
Material:
polyester
Manufacture:
kernmantle lanyard
Manufacture:
Diameter:
10,5 mm
polyamide webbing
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
3
2
Ref. no. BW210/AZ011/AZ002
Ref. no. BW210/AZ011/AZ029 Energy absorber BW 210 with connectors AZ 011 (galvanized steel, opening 18mm) AZ 029 (galvanized steel, plastic, opening 50mm)
Ref. no. BW210/AZ003/AZ029 Energy absorber BW 210 with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m
ENERGY ABSORBERS AND LANYARDS
Energy absorber BW 210 with connectors AZ 011 (galvanized steel, opening 18mm) AZ 002 (galvanized steel, opening 19mm)
1,5 m
0,9 m 1,5 m
0,9 m 1,5 m
2 ON SPECIAL REQUEST OTHER LENGTHS BETWEEN 0.5 AND 1.5 M ARE AVAILABLE
Energy absorbers and lanyards
3
29
BW 220
Energy absorber with twin-tail lanyard for works on scaffolds ABM SCF
EN 355
BW220
Ref. no.:

1
PRODUCT PRESENTATION protekt.co/bw220
PARAMETERS
LANYARD
ENERGY ABSORBER
Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
10,5 mm
Manufacture:
polyamide webbing
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
3
NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
1
2
3
ENERGY ABSORBERS AND LANYARDS
Ref. no. BW220/AZ011/2AZ002 Energy absorber BW 220 with connectors AZ 011 (galvanized steel, opening 18mm) 2 x AZ 002 (galvanized steel, opening 19mm)
0,9 m 1,5 m
Ref. no. BW220/AZ011/2AZ029 Energy absorber BW 220 with connectors AZ 011 (galvanized steel, opening 18mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
Ref. no. BW220/AZ003/2AZ029 Energy absorber BW 220 with connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
3
2
ON SPECIAL REQUEST OTHER LENGTHS BETWEEN 0.5 AND 1.5 M ARE AVAILABLE
30
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
BW 230
Energy absorber with webbing for works on scaffolds ABM SCF
EN 355
Ref. no.:
BW230
1
PARAMETERS
ENERGY ABSORBER
WEBBING Material:
polyester
Width:
32 mm
Manufacture:
polyamide webbing
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
3
2
Ref. no. BW230/AZ011/AZ002 0,9 m
ENERGY ABSORBERS AND LANYARDS
Energy absorber BW 230 with connectors AZ 011 (galvanized steel, opening 18mm) AZ 002 (galvanized steel, opening 19mm)
1,5 m
Ref. no. BW230/AZ011/AZ029 Energy absorber BW 230 with connectors AZ 011 (galvanized steel, opening 18mm) AZ 029 (galvanized steel, plastic, opening 50mm)
Ref. no. BW230/AZ003/AZ029 Energy absorber BW 230 with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
0,9 m 1,5 m
2 ON SPECIAL REQUEST OTHER LENGTHS BETWEEN 0.5 AND 1.5 M ARE AVAILABLE
Energy absorbers and lanyards
3
31
BW 240
Energy absorber with twin-tail webbing for works on scaffolds ABM SCF
EN 355
Ref. no.:
BW240
1
PARAMETERS ENERGY ABSORBER
WEBBING Material:
polyester
Width:
32 mm
Manufacture:
polyamide webbing
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
3
NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
1
2
3
ENERGY ABSORBERS AND LANYARDS
Ref. no. BW240/AZ011/2AZ002 Energy absorber BW 240 with connectors AZ 011 (galvanized steel, opening 18mm) 2 x AZ 002 (galvanized steel, opening 19mm)
0,9 m 1,5 m
Ref. no. BW240/AZ011/2AZ029 Energy absorber BW 240 with connectors AZ 011 (galvanized steel, opening 18mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
Ref. no. BW240/AZ003/2AZ029 Energy absorber BW 240 with connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
3
2
ON SPECIAL REQUEST OTHER LENGTHS BETWEEN 0.5 AND 1.5 M ARE AVAILABLE
32
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
BW 250
Energy absorber with elastic webbing for works on scaffolds ABM SCF
EN 355
Ref. no.:
BW250
1
PARAMETERS
ENERGY ABSORBER
WEBBING Material:
polyester
Width:
40 mm
Manufacture:
polyamide webbing
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
3
2
Ref. no. BW250/AZ011/AZ002 0,9 m
ENERGY ABSORBERS AND LANYARDS
Energy absorber BW 250 with connectors AZ 011 (galvanized steel, opening 18mm) AZ 002 (galvanized steel, opening 19mm)
1,5 m
Ref. no. BW250/AZ011/AZ029 Energy absorber BW 250 with connectors AZ 011 (galvanized steel, opening 18mm) AZ 029 (galvanized steel, plastic, opening 50mm)
Ref. no. BW250/AZ003/AZ029 Energy absorber BW 250 with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
0,9 m 1,5 m
2 ON SPECIAL REQUEST OTHER LENGTHS BETWEEN 0.5 AND 1.5 M ARE AVAILABLE
Energy absorbers and lanyards
3
33
BW 260
Energy absorber with elastic twin-tail webbing for works on scaffolds ABM SCF
EN 355
Ref. no.:
BW260
1
PARAMETERS ENERGY ABSORBER
WEBBING Material:
polyester
Width:
40 mm
Manufacture:
polyamide webbing
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
3
NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
1
2
3
ENERGY ABSORBERS AND LANYARDS
Ref. no. BW260/AZ011/2AZ002 Energy absorber BW 260 with connectors AZ 011 (galvanized steel, opening 18mm) 2 x AZ 002 (galvanized steel, opening 19mm)
0,9 m 1,5 m
Ref. no. BW260/AZ011/2AZ029 Energy absorber BW 260 with connectors AZ 011 (galvanized steel, opening 18mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
Ref. no. BW260/AZ003/2AZ029 Energy absorber BW 260 with connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
0,9 m 1,5 m
3
2
ON SPECIAL REQUEST OTHER LENGTHS BETWEEN 0.5 AND 1.5 M ARE AVAILABLE
34
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
LB 100
Adjustable safety lanyard
EN 354, EN 358
Ref. no.:
1
PARAMETERS
Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
12 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
Ref. no. LB100/2AZ011
1,4 m
Adjustable lanyard LB 100 with connectors 2 x AZ 011 (galvanized steel, opening 18mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB100/2AZ002
1,4 m
Adjustable lanyard LB 100 with connectors 2 x AZ 002 (galvanized steel, opening 19mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB100/2AZ003
1,4 m
Adjustable lanyard LB 100 with connectors 2 x AZ 003 (aluminium, opening 20mm)
1,6 m
3
1,9 m 2,0 m
Ref. no. LB100/AZ002/AZ029
ENERGY ABSORBERS AND LANYARDS
2
LB 100
1,4 m
Adjustable lanyard LB 100 with connectors AZ 1,6 m 002 (galvanized steel, opening 18mm) 1,9 m AZ 029 (galvanized steel, plastic, opening 50mm)
2,0 m
Ref. no. LB100/AZ003/AZ029
1,4 m
Adjustable lanyard LB 100 with connectors AZ 1,6 m 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 1,9 m 50mm)
2,0 m
Ref. no. LB100
1,4 m
Adjustable lanyard LB 100 WITHOUT CONNECTORS
1,6 m 1,9 m 2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
35
LB 101
Lanyard
EN 354, EN 358
Ref. no.:
2
LB 101
1 PARAMETERS
Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
10,5 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
1
2
Ref. no. B101/2AZ011
1,4 m
Lanyard LB 101 with connectors 2 x AZ 011 (galvanized steel, opening 18mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB101/2AZ002
1,4 m
Lanyard LB 101 with connectors 2 x AZ 002 (galvanized steel, opening 19mm)
1,6 m
3
1,9 m 2,0 m
Ref. no. LB101/2AZ003
1,4 m
Lanyard LB 101 with connectors 2 x AZ 003 (aluminium, opening 20mm)
1,6 m 1,9 m
ENERGY ABSORBERS AND LANYARDS
2,0 m nr kat. LB101/AZ002/AZ029
1,4 m
Lanyard LB 101 with connectors AZ 002 (galvanized steel, opening 18mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m
Ref. no. LB101/AZ003/AZ029
1,4 m
Lanyard LB 101 with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m
Ref. no. LB101
1,4 m
Lanyard LB 101 WITHOUT CONNECTORS
1,6 m
1,9 m 2,0 m
1,9 m 2,0 m
1,9 m 2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
36
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
LB 102
Twin-tail lanyard
EN 354
Ref. no.:
LB 102
PARAMETERS 2
1 Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
10,5 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
1
2
3
Ref. no. LB102/3AZ011
1,4+1,4 m
Twin-tail lanyard LB 102 with connectors 3 x AZ 011 (galvanized steel, opening 18mm)
1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
Ref. no. LB102/AZ002/2AZ029
1,4+1,4 m
Twin-tail lanyard LB 102 with connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
1,6+1,6 m
Ref. no. LB102/AZ003/2AZ029
1,4+1,4 m
1,9+1,9 m
3
2,0+2,0 m
Twin-tail lanyard LB 102 with connectors AZ 1,6+1,6 m 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 1,9+1,9 m 50mm)
2,0+2,0 m
Ref. no. LB102/AZ002/2AZ025 Twin-tail lanyard LB 102 with connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
ENERGY ABSORBERS AND LANYARDS
3
1,4+1,4 m 1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
Ref. no. LB102/AZ003/2AZ024
1,4+1,4 m
Twin-tail lanyard LB 102 with connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
Ref. no. LB102
1,4+1,4 m
Twin-tail lanyard LB 102 WITHOUT CONNECTORS
1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
37
LB 100 HV
Adjustable lanyard HV
EN 354, EN 358
Ref. no.:
LB 100 HV
2
1
PARAMETERS
3
SPECIAL FEATURES
Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
12 mm
COLOUR VERSIONS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
HV YELLOW/GREEN
HV ORANGE
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
1
Ref. no. LB100HV/2AZ011
1,4 m
ENERGY ABSORBERS AND LANYARDS
Adjustable lanyard LB 100 HV with connectors 1,6 m 2 x AZ 011 (galvanized steel, opening 18mm)
1,9 m 2,0 m
2
Ref. no. LB100HV/AZ002/AZ029
1,4 m
Adjustable lanyard LB 100 HV with connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB100HV/2AZ002
1,4 m
Ref. no. LB100HV/AZ003/AZ029
1,4 m
Adjustable lanyard LB 100 HV with connectors 2 x AZ 002 (galvanized steel, opening 19mm)
1,6 m
Adjustable lanyard LB 100 HV with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m
Ref. no. LB100HV
1,4 m
Adjustable lanyard LB 100 HV WITHOUT CONNECTORS
1,6 m
1,9 m 2,0 m
Ref. no. LB100HV/2AZ003
1,4 m
Adjustable lanyard LB 100 HV with connectors 1,6 m 2 x AZ 003 (aluminium, opening 20mm)
1,9 m 2,0 m
1,9 m 2,0 m
1,9 m 2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
38
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
LB 101 HV
Lanyard HV
EN 354, EN 358
Ref. no.:
LB 101 HV
2
1
SPECIAL FEATURES
Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
12 mm
COLOUR VERSIONS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
HV YELLOW/GREEN
HV ORANGE
DEVICE STANDARD CONFIGURATIONS
1
NEW CONNECTOR AZ 029
2
1
2
Ref. no. LB101HV/2AZ011
1,4 m
Ref. no. LB101HV/AZ002/AZ029
1,4 m
Lanyard LB 101 HV with connectors 2 x AZ 011 (galvanized steel, opening 18mm)
1,6 m
Lanyard LB 101 HV with connectors AZ 002 (galvanized steel, opening 18mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m
1,4 m
Ref. no. LB101HV/AZ003/AZ029
1,4 m
Lanyard LB 101 HV 1,6 m with connectors 2 x AZ 002 (galvanized steel, opening 19mm) 1,9 m
Lanyard LB 101 HV with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m
1,9 m 2,0 m
Ref. no. LB101HV/2AZ002
2,0 m
1,9 m 2,0 m
1,9 m 2,0 m
Ref. no. LB101HV/2AZ003
1,4 m
Ref. no. LB101HV
1,4 m
Lanyard LB 101 HV with connectors 2 x AZ 003 (aluminium, opening 20mm)
1,6 m
Lanyard LB 101 HV WITHOUT CONNECTORS
1,6 m
1,9 m
3
2,0 m
ENERGY ABSORBERS AND LANYARDS
PARAMETERS
1,9 m 2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
39
LB 102 HV
Twin-tail lanyard HV
EN 354
Ref. no.:
LB 102 HV
PARAMETERS 3
2
1 Material:
polyester
Manufacture:
kernmantle lanyard
Diameter:
10,5 mm
SPECIAL FEATURES
COLOUR VERSIONS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
HV YELLOW/GREEN
HV ORANGE
NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
1
2
3
Ref. no. LB102HV/3AZ011
1,4+1,4 m
Twin-tail lanyard LB 102 HV with connectors 3 x AZ 011 (galvanized steel, opening 18mm)
1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
Ref. no. LB102HV/AZ002/2AZ029 1,4+1,4 m Twin-tail lanyard LB 102 HV with connectors 1,6+1,6 m AZ 002 (galvanized steel, opening 19mm) 2 x AZ 029 (galvanized steel, plastic, opening 1,9+1,9 m 50mm)
3
2,0+2,0 m
Ref. no. LB102HV/AZ003/2AZ029 1,4+1,4 m Twin-tail lanyard LB 102 HV with connectors 1,6+1,6 m AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 1,9+1,9 m 50mm)
2,0+2,0 m
ENERGY ABSORBERS AND LANYARDS
Ref. no. LB102HV/AZ002/2AZ025 Twin-tail lanyard LB 102 HV with connectors AZ 002 (galvanized steel, opening 19mm) 2 x AZ 025 (galvanized steel, opening 83mm)
1,4+1,4 m 1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
Ref. no. LB102HV/AZ003/2AZ024 1,4+1,4 m Twin-tail lanyard LB 102 HV with connectors AZ 003 (aluminium, opening 20mm) 2 x AZ 024 (aluminium, opening 100mm)
1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
Ref. no. LB102HV
1,4+1,4 m
Twin-tail lanyard LB 102 HV WITHOUT CONNECTORS
1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
40
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
LB 200 FLR
Heat-resistant adjustable lanyard
EN 354, EN 358
Ref. no.:
LB 200 FLR
2 ARAMID KERNMANTLE LANYARD
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS
Material:
aramid
Manufacture:
aramid kernmantle lanyard
Diameter:
11,4 mm
1
NEW CONNECTOR AZ 029
2
Ref. no. LB200FLR/2AZ011
1,4 m
Adjustable lanyard LB 200 FLR with connectors 2 x AZ 011 (galvanized steel, opening 18mm)
1,6 m 1,9 m 2,0 m
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
Ref. no. LB200FLR/2AZ002
1,4 m
Adjustable lanyard LB 200 FLR with connectors 2 x AZ 002 (galvanized steel, opening 19mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB200FLR/2AZ003
1,4 m
Adjustable lanyard LB 200 FLR with connectors 2 x AZ 003 (aluminium, opening 20mm)
1,6 m
3
1,9 m 2,0 m
Ref. no. LB200FLR/AZ002/AZ029
1,4 m
Adjustable lanyard LB 200 FLR with connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m
ENERGY ABSORBERS AND LANYARDS
SPECIAL FEATURES
1,9 m 2,0 m
Ref. no. LB200FLR/AZ003/AZ029
1,4 m
Adjustable lanyard LB 200 FLR with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB200FLR
1,4 m
Adjustable lanyard LB 200 FLR WITHOUT CONNECTORS
1,6 m 1,9 m 2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
41
LB 201 FLR
Heat-resistant lanyard
EN 354, EN 358
Ref. no.:
LB 201 FLR
2
ARAMID KERNMANTLE LANYARD
1
PARAMETERS
DEVICE STANDARD CONFIGURATIONS
Material:
aramid
Manufacture:
aramid kernmantle lanyard
Diameter:
11,4 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
3
1
NEW CONNECTOR AZ 029
2
Ref. no. LB201FLR/2AZ011
1,4 m
Adjustable lanyard LB 201 FLR with connectors 2 x AZ 011 (galvanized steel, opening 18mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB201FLR/2AZ002
1,4 m
Adjustable lanyard LB 201 FLR with connectors 2 x AZ 002 (galvanized steel, opening 19mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB201FLR/2AZ003
1,4 m
Adjustable lanyard LB 201 FLR with connectors 2 x AZ 003 (aluminium, opening 20mm)
1,6 m 1,9 m
ENERGY ABSORBERS AND LANYARDS
2,0 m Ref. no. LB201FLR/AZ002/AZ029
1,4 m
Adjustable lanyard LB 201 FLR with connectors AZ 002 (galvanized steel, opening 19mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB201FLR/AZ003/AZ029
1,4 m
Adjustable lanyard LB 201 FLR with connectors AZ 003 (aluminium, opening 20mm) AZ 029 (galvanized steel, plastic, opening 50mm)
1,6 m 1,9 m 2,0 m
Ref. no. LB201FLR
1,4 m
Adjustable lanyard LB 201 FLR WITHOUT CONNECTORS
1,6 m 1,9 m 2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
42
3
Energy absorbers and lanyards
WWW.PROTEKT.COM.PL
LB 202 FLR
Heat-resistant adjustable twin-tail lanyard
EN 354
Ref. no.:
NEW
LB 202 FLR
PARAMETERS
2
Material:
aramid
Manufacture:
aramid kernmantle lanyard
Diameter:
11,4 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
NEW CONNECTOR AZ 029
DEVICE STANDARD CONFIGURATIONS
1
2
3
Ref. no. LB202FLR/3AZ011
1,4+1,4 m
Twin-tail lanyard LB 202 FLR with connectors 3 x 1,6+1,6 m AZ 011 (galvanized steel, opening 18mm)
1,9+1,9 m 2,0+2,0 m
Ref. no. LB202FLR/AZ002/2AZ029 1,4+1,4 m Twin-tail lanyard LB 202 FLR with connectors AZ 1,6+1,6 m 002 (galvanized steel, opening 19mm) 1,9+1,9 m 2 x AZ 029 (galvanized steel, plastic, opening 50mm)
2,0+2,0 m
3
Ref. no. LB202FLR/AZ003/2AZ029 1,4+1,4 m Twin-tail lanyard LB 202 FLR with connectors 1,6+1,6 m AZ 003 (aluminium, opening 20mm) 2 x AZ 029 (galvanized steel, plastic, opening 1,9+1,9 m 50mm)
2,0+2,0 m
Ref. no. LB202FLR/AZ002/2AZ025 1,4+1,4 m
ENERGY ABSORBERS AND LANYARDS
3
1
Twin-tail lanyard LB 202 FLR with connectors AZ 1,6+1,6 m 002 (galvanized steel, opening 18mm) 1,9+1,9 m 2 x AZ 025 (galvanized steel, opening 83mm)
2,0+2,0 m Ref. no. LB202FLR/AZ003/2AZ024 1,4+1,4 m Twin-tail lanyard LB 202 FLR with connectors 1,6+1,6 m AZ 003 (aluminium, opening 20mm) 1,9+1,9 m 2 x AZ 024 (aluminium, opening 100mm)
2,0+2,0 m
ARAMID KERNMANTLE LANYARD
Ref. no. LB202FLR
1,4+1,4 m
Twin-tail lanyard LB 202 FLR WITHOUT CONNECTORS
1,6+1,6 m 1,9+1,9 m 2,0+2,0 m
OTHER DEVICE CONFIGURATIONS ON SPECIAL REQUEST
Energy absorbers and lanyards
3
43
GUIDED TYPE AND RETRACTABLE TYPE FALL ARRESTERS
4
Retractable type and guided type fall arresters 4-2
Retractable type fall arresters Guards for retractable type fall arresters
4 - 17
Roof lanyard
4 - 18
Guided type fall arresters
4 - 19
4
ROLEX 1
Webbing retractor
EN 360
Ref. no.:
AH 210 PARAMETERS
protekt.co/rolex
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
Dimensions:
96 x 98 x 320 mm
Weight:
1180 g
The ROLEX 1 retractor is a component of personal fall protection equipment.
SPECIAL FEATURES
4
max. 2250 mm
Retractable type fall arrester AH 210 with expandable textile webbing in a new, strong ABS cover with connectors AZ 011 and AZ 002AS. Locking mechanism inside the impact-resistant cover. The device is intended for works requiring mobility in respect to attachment point. Energy absorber is not required.
PRODUCT PRESENTATION
Tested for maximum user's weight 140 kg
Working length:
REF. NO.:
For vertical use
Protection of 1 PERSON
AH 210
ROLEX 2
Webbing retractor
EN 360
Ref. no.:
AH 220
protekt.co/rolex
PRODUCT PRESENTATION
PARAMETERS
Working length:
max. 2250 mm
Dimensions:
96 x 98 x 320 mm
Weight:
1500 g
Retractable type fall arrester AH 220 with expandable textile webbing in a new, strong ABS cover with connectors AZ 022 and AZ 002AS. Locking mechanism inside the impact-resistant cover. The device is intended for works requiring mobility in respect to attachment point. Energy absorber is not required. Maximum user’s weight is 140 kg. The ROLEX 2 retractor is a component of personal fall protection equipment. SPECIAL FEATURES
Tested for maximum user's weight 140 kg
2
4
For vertical use
Protection of 1 PERSON
Retractable type and guided type fall arresters
REF. NO.:
AH 220
WWW.PROTEKT.COM.PL
ROLEX 3
Webbing retractor
EN 360
Ref. no.:
AH 220S
PRODUCT PRESENTATION protekt.co/rolex
SWIVEL SHACKLE
COVER
ENERGY ABSORBER
SWIVEL SHACKLEK
PARAMETERS
Working length:
max. 2250 mm
Dimensions:
96 x 98 x 320 mm
Weight:
1680 g
Retractable type fall arrester AH 220S with expandable textile webbing in a new, strong ABS cover with connectors AZ 022S and AZ 002AS. Locking mechanism inside the impact-resistant cover. The device is intended for works requiring mobility in respect to attachment point. Energy absorber is not required. Maximum user’s weight is 140 kg . The ROLEX 3 retractor is a component of personal fall protection equipment.
SPECIAL FEATURES REF. NO.:
Tested for maximum user's weight 140 kg
For vertical use
Protection of 1 PERSON
AH220S
Retractable type and guided type fall arresters
4
3
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
CR 200
Retractable type fall arrester
EN 360
Ref. no.:
IMPROVED
CR 200
PRODUCT PRESENTATION protekt.co/cr
59cm - with wound cable
Retractable type fall arrester CR 200 is a component of personal fall protection equipment.
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
Retractable type fall arrester CR 200 in plastic cover with expandable steel cable. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required. Retractable type fall arrester CR 200 is a component of personal fall protection equipment. The device is tested and approved for working on flat roofs in combination with roof lanyard AZ 800.
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
For vertical use
On request, the device is available with the permission to work in potentially explosive areas
For horizontal and vertical use
with AZ 800
Protection of 1 PERSON
AZ 002ASI
PARAMETERS
4
4
Retractable type and guided type fall arresters
Cable diameter:
4 mm
Maximum user’s weight:
140 kg
REF. NO.::
CABLE LENGTH
WEIGHT
CR 200 06
6m
5,10 kg
CR 200 10
10 m
5,30 kg
CR 200 12
12 m
5,90 kg
CR 200 15
15 m
6,10 kg
WWW.PROTEKT.COM.PL
CR 210
Retractable type fall arrester
EN 360
Ref. no.:
IMPROVED
CR 210
Retractable type fall arrester CR 210 in steel cover with expandable galvanized steel 4 mm cable. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required.. Retractable type fall arrester CR 210 is a component of personal fall protection equipment. PARAMETERS
Tested for maximum user's weight 140 kg
For vertical use
AZ 002ASI
On request, the device is available with the permission to work in potentially explosive areas
Cable diameter:
4 mm
Maximum user’s weight::
140 kg
Protection of 1 PERSON
REF. NO.:
CABLE LENGTH
WEIGHT
CR 210 06
6m
5,30 kg
CR 210 10
10 m
5,50 kg
CR 210 12
12 m
6,20 kg
CR 210 15
15 m
6,50 kg
CR 220
Retractable type fall arrester
EN 360
Ref. no.:
IMPROVED 4
CR 220
Retractable type fall arrester CR 220 with expandable stainless steel 5mm cable. Mechanism is made of stainless steel and enclosed in plastic cover. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required.
59cm - with wound cable
Retractable type fall arrester CR 220 is a component of personal fall protection equipment. SPECIAL FEATURES
Tested for maximum user's weight 140 kg
PARAMETERS
For vertical use
AZ 002ASI
On request, the device is available with the permission to work in potentially explosive areas
Cable diameter:
5 mm
Maximum user’s weight::
140 kg
Protection of 1 PERSON
REF. NO.::
CABLE LENGTH
WEIGHT
CR 220 06
6m
5,10 kg
CR 220 10
8m
5,30 kg
CR 220 12
11 m
5,90 kg
Retractable type and guided type fall arresters
4
5
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
59cm - with wound cable
SPECIAL FEATURES
CR 240
Retractable type fall arrester
EN 360
Ref. no.:
IMPROVED
CR 240
PRODUCT PRESENTATION
59cm - with wound cable
ALUMINIUM SWIVEL SHACKLE
Retractable type fall arrester CR 240 with expandable steel cable in plastic cover. Fitted with a comfortable side handle. Cable diameter is 4mm. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required.
4
Retractable type fall arrester CR 240 is a component of personal fall protection equipment. STEEL CABLE Ø 4mm SWIVEL SHACKLE
PARAMETERS
FALL INDICATOR
AZ 002ASI
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
protekt.co/cr240
Cover:
plastic
Manufacture:
galvanized steel
Cable diameter:
4 mm
SPECIAL FEATURES
Tested for maximum user's weight 140 kg For vertical use
THE DEVICE WEIGHS ONLY
4,10 kg
Protection of 1 PERSON
REF. NO.:
CABLE LENGTH
WEIGHT
CR 240 06
6m
4,10 kg
CR 240 10
10 m
4,35 kg
CR 240 12
12 m
4,90 kg
CR 240 15
15 m
5,10 kg
6
4
Retractable type and guided type fall arresters
WWW.PROTEKT.COM.PL
CR 241
Retractable type fall arrester
EN 360
Ref. no.:
IMPROVED
CR 241
Retractable type fall arrester CR 241 with expandable steel cable in plastic cover. Fitted with a comfortable side handle. Cable diameter is 4mm. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required. The arrester is equipped with fixed connector AZ 022.
4 RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
75cm - with wound cable
Retractable type fall arrester CR 241 is a component of personal fall protection equipment.
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
For vertical use
Protection of 1 PERSON
THE DEVICE WEIGHS ONLY
4,60 kg
PARAMETERS SWIVEL SHACKLE
AZ 002ASI
FALL INDICATOR
Cover:
plastic
Manufacture:
galvanized steel
Cable diameter:
4 mm
REF. NO.:
CABLE LENGTH
WEIGHT
CR 241 06
6m
4,60 kg
CR 241 10
10 m
4,85 kg
CR 241 12
12 m
5,10 kg
CR 241 15
15 m
5,70 kg
Retractable type and guided type fall arresters
4
7
CR 245
Retractable type fall arrester
EN 360
Ref. no.:
IMPROVED
CR 245
IMPROVED CORROSION-RESISTANCE
AISI 316 STAINLESS STEEL SWIVEL
59 cm - with wound cable
external and internal elements made of stainless steel
PARAMETERS
plastic
Manufacture:
galvanized steel
Cable diameter:
5 mm
SPECIAL FEATURES STAINLESS STEEL CABLE Ø 5mm
Tested for maximum user's weight 140 kg
SWIVEL SHACKLE
FALL INDICATOR
AZ 002ASI
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
Cover:
For vertical use
THE DEVICE WEIGHS ONLY
4,12 kg
Protection of 1 PERSON
Retractable type fall arrester CR 245 with expandable steel cable in plastic cover. Equipped with stainless steel swivel. Fitted with a comfortable side handle. Cable made of stainless steel of 5mm dia. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required. Retractable type fall arrester CR 245 is a component of personal fall protection equipment.
REF. NO.::
CABLE LENGTH
WEIGHT
CR 245 06
6m
4,12 kg
CR 245 08
8m
4,25 kg
CR 245 11
11 m
4,45 kg
8
4
Retractable type and guided type fall arresters
WWW.PROTEKT.COM.PL
CR 300
Retractable type fall arrester
EN 360
Ref. no.:
CR 300
PRODUCT PRESENTATION protekt.co/cr300
Retractable type fall arrester CR 300 with expandable galvanized steel 4mm cable. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required. The device is tested and approved for working on flat roofs in combination with roof lanyard AZ 800.
59cm - with wound cable
Retractable type fall arrester CR 300 is a component of personal fall protection equipment. SPECIAL FEATURES
PARAMETERS
On request, the device is available with the permission to work in potentially explosive areas
AZ 002ASI
For vertical use
For horizontal and vertical use with AZ 800
Protection of 1 PERSON
WR 100
Retractable type fall arrester
EN 360
Ref. no.:
Cable diameter:
4 mm
Maximum user’s weight::
140 kg
REF. NO.:.:
CABLE LENGTH WEIGHT
CR 300 18
18 m
11,10 kg
CR 300 20
20 m
11,25 kg
CR 300 25
25 m
11,50 kg
CR 300 28 28 m
11,65 kg
WR 100
4
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
PRODUCT PRESENTATION
58cm - with wound webbing
protekt.co/wr100
Retractable type fall arrester WR 100 with connectors AZ 011 and AZ 002ASI, fitted with expandable webbing, 17mm wide. Locking mechanism inside the composite cover. The device is intended for works requiring mobility in respect to attachment point. Energy absorber is not required. The WR 100 arrester is a component of personal fall protection equipment. PARAMETERS
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
For vertical use
Protection of 1 PERSON
Webbing width:
17 mm
Working length:
max. 6 m
Static strength:
no less than 15 kN
Braking force:
less than 6 kN
Weight:
1,8 kg
REF. NO.:
LENGTH
WEIGHT
WR 100
6m
1,80 kg
Retractable type and guided type fall arresters
4
9
CRW 200
Retractable type fall arrester
EN 360, EN 1496 CLASS B
Ref. no.:
CRW 200

PRODUCT PRESENTATION
53 cm - with wound cable
protekt.co/crw200
4
RESCUE LIFTING DEVICE
SWIVEL SHACKLE FALL INDICATOR
CRW 200 can be used independently or with selected tripods. In order to install the device on a tripod use a mounting bracket. Retractable type fall arrester CRW 200 is a component of personal fall protection equipment.
AZ 002ASI
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
CRW 200 is a combination of a retractable type fall arrester and a rescue lifting device. The cover is made of an aluminium alloy. CRW 200 is fitted with a rescue lifting device with galvanized steel cable.
ABSORBING SPRING
PARAMETERS
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
Protection of 1 PERSON
10
4
For vertical use On request, the device is available with the permission to work in potentially explosive areas
Retractable type and guided type fall arresters
Cable diameter:
4,7 mm
Working load:
min. 50 kg, max. 140 kg
Working length:
max. 15 m
Dimensions:
300 x 230 x 175 mm
Weight:
11 kg
REF. NO.:
CABLE LENGTH
WEIGHT
CRW 200
15 m
11 kg
WWW.PROTEKT.COM.PL
CRW 300
Retractable type fall arrester
EN 360, EN 1496 CLASS B
Ref. no.:
CRW 300

PRODUCT PRESENTATION protekt.co/crw300
RESCUE LIFTING DEVICE
CRW 300 is a combination of a retractable type fall arrester and a rescue lifting device. The cover is made of an aluminium alloy. The arrester is fitted with retractable zinc plated steel cable.
64cm - with wound cable
CRW 300 is fitted with rescue lifting device, and can be used independently or with selected tripods. In order to install the device on a tripod use a mounting bracket. Retractable type fall arrester CRW 300 is a component of personal fall protection equipment
Tested for maximum user's weight 140 kg
ABSORBING SPRING
On request, the device is available with the permission to work in potentially explosive areas
SWIVEL SHACKLE FALL INDICATOR
Protection of 1 PERSON
For vertical use
AZ 002ASI
PARAMETERS
REF. NO.:
CABLE LENGTH
WEIGHT
CRW 300
25 m
15 kg
CRW 300 + connector AZ 017
25 m
15 kg
Cable diameter:
4,7 mm
Working load:
max. 140 kg
Working length:
max. 25 m
Dimensions:
365 x 267 x 132 mm
Weight:
15 kg
Retractable type and guided type fall arresters
4
11
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
SPECIAL FEATURES
CR 030
Steel cable retractor
EN 360
Ref. no.:
IMPROVED
AZ 011
CR 030
PRODUCT PRESENTATION
SWIVEL SHACKLE
58cm - with wound webbing
Retractable type fall arrester with expandable steel cable ø 4 mm, fitted with a locking mechanism in a durable plastic cover. CR 030 is fitted with an integrated swivel shackle at the eye for device anchoring. The device is intended for works requiring significant mobility in respect to attachment point. Energy absorber is not required. SPECIAL FEATURES SWIVEL SHACKLE
Tested for maximum user's weight 140 kg
For vertical use
Protection of 1 PERSON PARAMETERS
AZ 002ASI
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
310cm - with maximum webbing length
AZ 002ASI
protekt.co/cr030
12
4
Retractable type and guided type fall arresters
Max. user's weight:
140 kg
Max. working length:
3m
Cable diameter:
4 mm
Weight:
~1750g + connector weight
REF. NO.:
LENGTH
WEIGHT
CR 030
3m
1,75 kg
WWW.PROTEKT.COM.PL
WR 020
Steel cable retractor
EN 360
Ref. no.:
WR 020
PRODUCT PRESENTATION protekt.co/wr020
SWIVEL SHACKLE
red
blue
grey
AVAILABLE COLOUR VERSIONS
58cm - with wound webbing
ENERGY ABSORBER ON WEBBING
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
For vertical use
Protection of 1 PERSON SWIVEL SHACKLE
PARAMETERS
Weight:
~ 850g + connector weight
Webbing:
17,5 x 2 mm
Max. user’s weight:
140 kg
Min. static strength:
15kN
Max. braking force:
6 kN
REF. NO.:
LENGTH
WR 020 18
max. 1,80 m
WR 020 20
max. 2,00 m
WR 020 23
max. 2,30 m
Retractable type and guided type fall arresters
4
13
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
AZ 002AS
180, 200, 230cm - with maximum webbing length
1. Retractable type fall arrester WR 020 with expandable textile webbing in a durable plastic cover. 2. Locking mechanism in an impact-resistant cover with swivel shackle in upper part of the device. 3. Additionally, lower connector is fitted with swivel shackle and indicator. 4. The device is intended for works requiring mobility in respect to attachment point. Energy absorber is not required.
WR 025
Retractable type fall arrester
EN 360
Ref. no.:
78cm - with wound webbing
245cm - with maximum webbing length
68cm - with wound webbing
235cm - with maximum webbing length
AZ 011
AZ 022
WR 025
TEXTILE WEBBING
TEXTILE WEBBING
AZ 002AS
AZ 002AS
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
WR 025 10
PARAMETERS
WR 025 20
SPECIAL FEATURES
Webbing width:
17,5 mm
Max. user’s weight:
140 kg
Min. static strength:
15 kN
Max. braking force::
6 kN
Weight:
~ 850g + connector weight
On request, the device is available with the permission to work in potentially explosive areas
Tested for maximum user's weight 140 kg
For vertical use For horizontal use with AZ 800
Protection of 1 PERSON Retractable type fall arrester WR 025 with expandable textile webbing in a durable plastic cover. Locking mechanism in a durable cover with swivel shackle in upper part of the device. Additionally, lower connector is fitted with swivel shackle. The device is intended for works requiring mobility in respect to attachment point. Energy absorber is not required. The device is tested and approved for working on flat roofs in combination with roof lanyard AZ 800.
14
4
Retractable type and guided type fall arresters
REF. NO.:
LENGTH
WR 025 10
2,45 m
WR 025 20
2,55 m
WWW.PROTEKT.COM.PL
WR 040
Retractable type fall arrester
EN 360, VG 11 CNB/P/11.085:2015
Ref. no.:
WR 040
STRENGTHENED CONSTRUCTION
CLR - SAFETY CLEARANCE
TESTED FOR FALL FACTOR 2
free fall distance
anchorage point min. 12 kN
FOR WORK ABOVE ANCHOR POINT
1m
Device recommended for work requiring mobility above an anchor point.
PARAMETERS
Weight:
~ 900g + connector weight
Webbing:
18,5 x 2,2 mm
Max. user’s weight::
140 kg
Max. user’s weight:
6 kN
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
REF. NO.:
WR 040
Retractable type and guided type fall arresters
4
15
4 RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
ENERGY ABSORBER WITH INCREASED BR AKING CAPACIT Y
1. Retractable type fall arrester WR 040 with expandable textile webbing in a plastic cover of strengthened construction. 2. Thicker webbing ensures higher strength. 3. Locking mechanism in a durable cover with swivel shackle in upper part of the device. 4. Additionally, lower connector is fitted with swivel shackle and indicator. 5. The device is intended for works requiring mobility in respect to attachment point. 6. Energy absorber is not required.
AZ 002ASI
68cm - with wound webbing
180cm - with maximum webbing length
TEXTILE WEBBING
WR 040 DOUBLE
Retractable type fall arrester
EN 360, VG 11 CNB/P/11.085:2015
Ref. no.:
WR 040
A Z 019T ALUMINIUM CONNECTOR
ADAPTER
PARAMETERS ENERGY ABSORBERS WITH INCREASED BR AKING CAPACIT Y
Weight:
~ 1850g + connector weight
Webbing:
18,0 x 2,2 mm
Max. user’s weight:
140 kg
Max. braking force::
6 kN
SPECIAL FEATURES
Tested for maximum user's weight 140 kg
AZ 002ASI
AZ 002ASI
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
63cm - with wound webbing
TEXTILE WEBBING
REF. NO.:.:
WR 040
16
4
Retractable type and guided type fall arresters
WWW.PROTEKT.COM.PL
OS 010, OS 030
Guard for retractable type fall arresters Ref. no.:
OS 010
OS 010, OS 030
intended for retractable type fall arresters: CR 200, CR 210, CR 220, CR240, CR241, CR245, CR 030, ROLEX 1, ROLEX 2, ROLEX 3, WR 020, W R 025, WR 100
OS 010 - CR 030
OS 010 - CR 240
OS 010 - WR 020
OS 010 - WR 025
OS 010 - WR 100
500 mm
OS 010 - CR 240, CR 241, CR 245
AVAILABLE COLOUR VERSIONS
OS 010 - CR 200, CR 210, CR 220
335 mm
yellow OS 010 OS 030
red OS 010 OS 030
black OS 010 OS 030
blue OS 010 OS 030
green OS 010 OS 030
grey OS 010 OS 030
4
OS 030
yellow Hi-Vis OS 010 OS 030
orange Hi-Vis OS 010 OS 030
transparent yellow Hi-Vis OS 010 OS 030
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
intended for retractable type fall arresters: CR 300 transparent orange Hi-Vis OS 010 OS 030
500 mm
1. Protects the device against unfavourable weather conditions 2. Increases service life of retractable type fall arresters 3. Available in various colour versions
PARAMETERS
Material:
Highly-transparent PVC, PVC Hi-Vis, PVC
Dimensions: OS010 - 500 x 335mm, OS030 - 500 x 390mm black, blue, grey, green, red, yellow, yellow Hi-Vis, orange Hi-Vis
Colours: OS 030 - CR 300
REF. NO.:
390 mm
OS010 / 0S030 - guard price without connector
Retractable type and guided type fall arresters
4
17
AZ 800
Roof lanyard
EN 354
Ref. no.:
AZ 800

PRODUCT PRESENTATION protekt.co/AZ800
AZ 800
retractable type fall arrester
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
USING AZ 800
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Tested for maximum user's weight 140 kg
For horizontal and vertical use
Protection of 1 PERSON
AZ 800 is a 1.8m long lanyard, intended for works on roof, suitable for cooperation with retractable type fall arresters CR 300, CR 200 and WR 025. REF. NO.:
AZ 800
18
4
Retractable type and guided type fall arresters
WWW.PROTEKT.COM.PL
SKR-BLOCK
Guided type fall arrester
EN 353-2
Ref. no.:
AC 040
Guided type fall arrester SKR-BLOCK intended for use with polyester work rope AC 200, 12mm dia. The device should be connected to full body harness by an oval connector, e.g. AZ 011. The AC 040 device is a component of personal fall protection equipment. The device should be used with PROTEKT work ropes, 12mm dia.
POLYESTER ROPE Ø 12MM
SPECIAL FEATURES
Protection of 1 PERSON REF. NO.:
WEIGHT
AC 040 - without rope
360 g
AC 200
Work rope for SKR-BLOCK system
EN 353-2
Ref. no.:
Kernmantle polyester work rope, 12mm dia. Intended for use with guided type fall arrester AC 040 SKR-BLOCK. The rope has loop with thimble at both endings.
LENGTH
LENGTH
10 m
30 m
15 m
35 m
20 m
40 m
25 m
50 m
Material:
polyester
Diameter:
12 mm
Retractable type and guided type fall arresters
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
PARAMETERS
4
AC 200
4
19
BLOCMAX
Guided type fall arrester
EN 353-2
Ref. no.:
AC 010
GUIDED TYPE MECHANISM GUIDED TYPE MECHANISM
POLYESTER ROPE Ø 14MM
4
ENERGY ABSORBER
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
Guided type fall arrester BLOCMAX intended for use with polyester work rope AC 100, 14mm dia. The device comprises the following components: 1. guided type mechanism; 2. energy dissipater; 3. energy dissipater steel connector - with snap hook AZ 002. The BLOCMAX device is a component of personal fall protection equipment. The device should be used with PROTEKT work ropes, 14mm dia. CONNECTOR
SPECIAL FEATURES
Protection of 1 PERSON NR KAT.:
AC 010 - without rope
20
4
Retractable type and guided type fall arresters
WWW.PROTEKT.COM.PL
AC 012
Guided type fall arrester
EN 353-2
Ref. no.:
AC 012 GUIDED TYPE MECHANISM
Guided type fall arrester AC 012 intended for use with work rope AC 100, 14mm dia. Parameters of the device enable direct connection to full body harness – with no energy dissipater required.
POLYESTER ROPE Ø 14MM
SPECIAL FEATURES
Protection of 1 PERSON REF. NO.:
AC 012 -without rope
AC 100
Work rope for AC 010 and AC 012
EN 353-2
Ref. no.:
4
Kernmantle polyester work rope, 14 mm dia. Intended for use with guided type fall arrester AC 010 BLOCMAX and AC 012. The rope has loop with thimble at both endings.
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
AC 100
LENGTH
30 m
PARAMETERS
35 m
Material:
polyester
Diameter:
14 mm
40 m 50 m
Retractable type and guided type fall arresters
4
21
AC 080
Guided type fall arrester
EN 353-2, EN 358, EN 12841 (as access rope)
Ref. no.:
AC 080
PRODUCT PRESENTATION protekt.co/ac080
HOW TO USE?
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
POLYESTER ROPE Ø 12MM
LOCKING PLATE
Guided type fall arrester AC 080 intended for use with polyester work rope AC 300, 12mm dia. The device should be connected to full body harness by an oval connector, e.g. AZ 011. The AC 080 device is a component of personal fall protection equipment. PARAMETERS
AVAILABLE COLOUR VERSIONS
Weight:
194 g
BLUE
BLACK
Material:
aluminium alloy
YELLOW
RED
SPECIAL FEATURES
22
4
Retractable type and guided type fall arresters
REF. NO.:
WEIGHT
AC 080 - without rope
194 g
WWW.PROTEKT.COM.PL
1
2
INSTALLING ROPE ON GUIDED TYPE FALL ARRESTER AC 080
AC 300
Work rope for AC 080 and AC 081
EN 353-2
Ref. no.:
4
4
AC 300
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
3
PARAMETERS
Material:
polyester
Diameter:
12 mm
LENGTH
LENGTH
10 m
30 m
15 m
35 m
20 m
40 m
25 m
50 m
Retractable type and guided type fall arresters
4
23
AC 081
Guided type fall arrester
EN 353-2, EN 358, EN 12841 (as access rope)
Ref. no.:
AC 081
STAINLESS STEEL SIDE PLATES
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
HOW TO USE?
LOCKING PLATE
AC 300 Ø 12 ROPE WITH THIMBLE
24
4
Retractable type and guided type fall arresters
WWW.PROTEKT.COM.PL
POSSIBLE USE OF AC 081
EN 358
EN 813
EN 12841
4
Guided type fall arrester AC 081 intended for use with polyester work rope AC 300, 12mm dia. The arrester should be connected to full body harness by an oval connector, e.g. AZ 011. Maximum load 120kg (EN 12841 as access rope).
The AC 081 device is a component of personal fall protection equipment. PARAMETERS
Weight:
350 g
Material:
stainless steel
SPECIAL FEATURES
NR KAT.:
WAGA
AC081 - without rope and connector
350 g AC081 - without rope and connector
Retractable type and guided type fall arresters
4
25
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
EN 353-2
LINOSTOP II
Guided type fall arrester + rope
EN 353-2
Ref. no.:
AC 060
ENERGY ABSORBER
INTEGRAL POLYESTER ROPE Ø 12MM
PARAMETERS
Diameter:
12 mm
Material:
polyester
RETRACTABLE TYPE AND GUIDED TYPE FALL ARRESTERS
4
LENGTH
5m 10 m 15 m 20 m
The device comprises the following components: 1. work rope with a loop with a thimble on one end and a splice on the other; 2. galvanized steel non-detachable rope grab mechanism fixed on the work rope; 3. energy dissipater; 4. connector for energy dissipater. The LINOSTOP II device is a component of personal fall protection equipment.
26
4
Retractable type and guided type fall arresters
25 m 30 m 35 m 40 m 45 m 50 M
WWW.PROTEKT.COM.PL
Connectors Detachable connectors
5-2
Integrated connectors
5 - 13
Screw link connectors
5 - 17
5
AZ 011
Detachable connector with locking gear
EN 362
Ref. no.:
AZ011
60 mm
Detachable connector with locking gear.
PARAMETERS m 18
110 x 60 mm
Opening:
18 mm
Weight:
160 g
Material:
galvanized steel
Static strength
25 kN
110 mm
m
Dimensions:
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 011
AZ 011A
Detachable connector with locking gear
EN 362
Ref. no.:
AZ011A
64 mm
PARAMETERS m 18
111 mm
m
5
Dimensions:
111 x 64 mm
Opening:
18 mm
Weight:
110 g
Material:
aluminium
Static strength
20 kN
SPECIAL FEATURES
CONNECTORS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 011A
2
5
Connectors
WWW.PROTEKT.COM.PL
AZ 011 INOX
Detachable connector with locking gear
EN 362
Ref. no.:
AZ011INOX
64 mm
PARAMETERS m 19
110 x 64 mm
Opening:
19 mm
Weight:
160 g
Material:
galvanized steel
Static strength
20 kN
110 mm
m
Dimensions:
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 011 INOX
AZ 011T
Detachable connector with “twist lock” gear
EN 362
Ref. no.
AZ011T
60 mm
PARAMETERS
108 x 60 mm
Opening:
18 mm
Weight:
170 g
Material:
galvanized steel
Static strength
20 kN
108 mm
Dimensions:
SPECIAL FEATURES
5 CONNECTORS
18 m
m
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 011T
Connectors
5
3
AZ 012
Detachable connector with locking gear
EN 362
Ref. no.:
AZ012
64 mm
21
PARAMETERS
110 mm
mm
Dimensions:
110 x 64 mm
Opening:
21 mm
Weight:
75 g
Material:
aluminium
Static strength
25 kN
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 012
AZ 012T
Detachable connector with “twist lock” gear
EN 362
Ref. no.:
AZ012T
64 mm
PARAMETERS
110 x 64 mm
Opening:
21 mm
Weight:
80 g
Material:
aluminium
Static strength
25 kN
110 mm
Dimensions:
SPECIAL FEATURES
5
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
CONNECTORS
21
mm
REF. NO.:
AZ 012T
4
5
Connectors
WWW.PROTEKT.COM.PL
AZ 012DT
Detachable connector with “double twist lock” gear
EN 362
Ref. no.:
AZ012DT
61 mm
PARAMETERS m 21 110 mm
m
Dimensions:
110 x 64 mm
Opening:
19 mm
Weight:
85 g
Material:
aluminium
Static strength
20 kN
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 012DT
AZ 013A
Detachable connector with locking gear
EN 362
Ref. no.:
80 mm
AZ013A
PARAMETERS
25
Dimensions:
119 x 80 mm
Opening:
25 mm
Weight:
95 g
Material:
aluminium
Static strength
20 kN
mm
SPECIAL FEATURES 119 mm
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
5
silver
black
gold
AZ 013A 01
AZ 013A 02
AZ 013A 03
CONNECTORS
COLOUR VERSIONS
REF. NO.:
AZ 013A
Connectors
5
5
AZ 014
Detachable connector with locking gear
EN 362
Ref. no.:
AZ014
73 mm
PARAMETERS
24
113 x 73 mm
Opening:
24 mm
Weight:
95 g
Material:
aluminium
Static strength
20 kN
113 mm
mm
Dimensions:
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 014
AZ 014T
Detachable connector with “twist lock” gear
EN 362
Ref. no.:
AZ014T
72 mm
117 mm
PARAMETERS
117 x 72 mm
Opening:
24 mm
Weight:
100 g
Material:
aluminium
Static strength
20 kN
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
CONNECTORS
24
mm
5
Dimensions:
REF. NO.:
AZ 014T
6
5
Connectors
WWW.PROTEKT.COM.PL
AZ 014DT
Detachable connector with “double twist lock” gear
EN 362
Ref. no.:
AZ014DT
73mm
Detachable connector with “double twist lock” automatic locking.
PARAMETERS
22
112 x 73 mm
Opening:
22 mm
Weight:
100 g
Material:
aluminium
Static strength
20 kN
112 mm
mm
Dimensions:
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 014DT
AZ 017
Detachable connector with locking gear
EN 362
Ref. no.:
AZ017
71 mm
PARAMETERS
113 mm
mm
113 x 71 mm
Opening:
25 mm
Weight:
200 g
Material:
galvanized steel
Static strength
20 kN
SPECIAL FEATURES
5
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
CONNECTORS
25
Dimensions:
REF. NO.:
AZ 017
Connectors
5
7
AZ 017T
Detachable connector with “twist lock” gear
EN 362
Ref. no.:
AZ017T
71 mm
PARAMETERS
113 x 71 mm
Opening:
25 mm
Weight:
200 g
Material:
galvanized steel
Static strength
20 kN
113 mm
mm 25
Dimensions:
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 017T
AZ 017DT
Detachable connector with “double twist lock” gear
EN 362
Ref. no.:
AZ017DT
71 mm
PARAMETERS
24
113 mm
mm
5
Dimensions:
113 x 80 mm
Opening:
24 mm
Weight:
210 g
Material:
galvanized steel
Static strength
20 kN
SPECIAL FEATURES
CONNECTORS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 017DT
8
5
Connectors
WWW.PROTEKT.COM.PL
AZ 018
Detachable connector with locking gear
EN 362
Ref. no.:
AZ018
80 mm
PARAMETERS
27
126 mm
mm
Dimensions:
126 x 80 mm
Opening:
27 mm
Weight:
230 g
Material:
galvanized steel
Static strength
20 kN
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 018
AZ 018T
Detachable connector with “twist lock” gear
EN 362
Ref. no.:
AZ018T
80 mm
PARAMETERS
126 mm
mm
126 x 80 mm
Opening:
27 mm
Weight:
245 g
Material:
galvanized steel
Static strength
20 kN
SPECIAL FEATURES
5
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
CONNECTORS
27
Dimensions:
REF. NO.:
AZ 018T
Connectors
5
9
AZ 019T
Detachable connector with “twist lock” gear
EN 362
Ref. no.:
AZ019T
75 mm
PARAMETERS
m
m
Dimensions:
119 x 75 mm
Opening:
27 mm
Weight:
95 g
Material:
aluminium
Static strength
20 kN
119 mm
27
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 019T
AZ 019DT
Detachable connector with “double twist lock” gear
EN 362
Ref. no.:
AZ019DT
75 mm
PARAMETERS
mm
119 mm
27
5
Dimensions:
119 x 75 mm
Opening:
27 mm
Weight:
90 g
Material:
aluminium
Static strength
25 kN
SPECIAL FEATURES
CONNECTORS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 019DT
10
5
Connectors
WWW.PROTEKT.COM.PL
AZ 111
Detachable connector with “twist lock” gear
EN 362
Ref. no.:
AZ111
111 mm
PARAMETERS
190 x 111 mm
Opening:
45 mm
Weight:
205 g
Material:
aluminium
Static strength
20 kN
190 mm
mm 45
Dimensions:
REF. NO.:
AZ 111
AZ 111B
Ref. no.:
AZ111B
111 mm
PARAMETERS 45
Dimensions:
196 x 111 mm
Opening:
45 mm
Weight:
220 g
Material:
aluminium
Static strength
20 kN
5 CONNECTORS
mm 196 mm
EN 362
Detachable connector with “twist lock” gear
REF. NO.:
AZ 111B
Connectors
5
11
AZ 122
NEW
Detachable connector with “twist lock” gear
EN 362
AZ122
Ref. no.: 140 mm
PARAMETERS
65
260 x 140 mm
Opening:
65 mm
Weight:
360 g
Material:
aluminium
Static strength
20 kN
260 mm
mm
Dimensions:
REF. NO.:
AZ 122
AZ 125
Detachable connector with “twist lock” gear
EN 362
Ref. no.:
AZ125
160 mm
PARAMETERS
88
340 x 160 mm
Opening:
88 mm
Weight:
490 g
Material:
aluminium
Static strength
20 kN
340 mm
mm
Dimensions:
CONNECTORS
5
REF. NO.:
AZ 125
12
5
Connectors
WWW.PROTEKT.COM.PL
AZ 024
Integrated connector with locking gear
EN 362
Ref. no.:
AZ024
190 mm
Integrated connector is available as a factory-mounted in the PROTEKT equipment or as a separate anchor element.
350 mm
PARAMETERS
Dimensions:
350 x 190 mm
Opening:
110 mm
Weight:
935 g
Material:
aluminium
Static strength
20 kN
REF. NO.:
AZ 024 - separately 110
AZ 024 - factory-mounted in equipment
mm
AZ 025
Integrated connector with locking gear
EN 362
Ref. no.:
AZ025
155 mm
Integrated connector is available as a factory-mounted in the PROTEKT equipment or as a separate anchor element.
330 mm
PARAMETERS
Dimensions:
330 x 155 mm
Opening:
83 mm
Weight:
845 g
Material:
steel galvanically protected against corrosion
Static strength
20 kN
CONNECTORS
m 83 m
5
REF. NO.:
AZ 025 - separately AZ 025 -factory-mounted in equipment
Connectors
5
13
AZ 029
Integrated connector with locking gear
EN 362
Ref. no.:
NEW
AZ029
206 mm
148 mm
50 mm
LOW WEIGHT 340 g
THE DEVICE WEIGHS ONLY
thanks to composite elements
Integrated connector is available as a factory-mounted in the PROTEKT equipment or as a separate anchor element.
COLOUR VERSIONS
PARAMETERS
CONNECTORS
5 black
red
blue
AZ 029 01
AZ 029 02
AZ 029 03
Dimensions:
146 x 206 mm
Opening:
50 mm
Weight:
340 g
Material:
galvanized steel, composite
Static strength
25 kN
REF. NO.:
AZ 029 - separately
14
5
orange
Hi Vision
AZ 029 04
AZ 029 05
Connectors
AZ 029 - factory-mounted in equipment
WWW.PROTEKT.COM.PL
AZ 029 ISOL
Integrated connector, insulated with locking gear
EN 362
Ref. no.:
NEW
AZ029ISOL
208 mm
150 mm
47 mm
Integrated connector is available as a factory-mounted in the PROTEKT equipment or as a separate anchor element.
SPECIAL FEATURES
Dimensions:
150 x 208 mm
Opening:
50 mm
Weight:
350 g
Material:
galvanized steel, composite
Static strength
25 kN
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
5 CONNECTORS
PARAMETERS
REF. NO.:
AZ 029 ISOL - separately AZ 029 ISOL - factory-mounted in equipment
Connectors
5
15
AZ 055
Integrated connector with locking gear
EN 362
Ref. no.:
NEW
AZ055
244 mm
97 mm
LIGHT CONNECTOR AT ONLY 250 g
50
mm
THE DEVICE WEIGHS ONLY
thanks to use of aluminium 7075 T6
CONNECTORS
5
New light connector AZ 055 thanks to use of high-quality materials (aluminium 7075 T6) and large opening (50mm) suits perfectly for cooperation with retractable type fall arresters such as WR 020/WR 040. The used swivel shackle prevents twisting of webbing or lanyard during operation and thus increases use comfort and safety. Moreover the applied anodizing considerably improves anti-corrosion characteristics of the product.
PARAMETERS
Dimensions:
97 x 244 mm
Opening:
50 mm
Weight:
250 g
Material:
aluminium 7075 T6
Static strength
20 kN
REF. NO.:
Integrated connector is available as a factory-mounted in the PROTEKT equipment or as a separate anchor element.
16
5
Connectors
AZ 055
WWW.PROTEKT.COM.PL
AZ 090
Detachable connector with locking gear
EN 362
Ref. no.:
AZ090
41 mm
Connector AZ 090 is intended for short-time and fixed connection of individual components of a fall protection system.
92 mm
13 mm
PARAMETERS
Dimensions:
92 x 41 mm
Opening:
13 mm
Weight:
65 g
Material:
stainless steel
Static strength
35 kN
SPECIAL FEATURES ø 10 mm
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
AZ 090
AZ 091
Detachable connector with locking gear
EN 362
Ref. no.:
56 mm
AZ091
Connector AZ 091 is intended for short-time and fixed connection of individual components of a fall protection system.
PARAMETERS
75 mm
8 mm
75 x 56 mm
Opening:
8 mm
Weight:
45 g
Material:
stainless steel
Static strength
20 kN
SPECIAL FEATURES
5
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
CONNECTORS
m
ø8m
Dimensions:
REF. NO.:
AZ 091
Connectors
5
17
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
6
Industrial safety helmets, eye and hearing protection Industrial safety helmets
6-2
Face shields and ear protectors
6-5
Bump caps
6 - 10
6
EVO LITE BASIC
Industrial safety helmet
EN 397
Ref. no.:
HA 007
Light safety helmet EVO LITE Basic. Size adjustment by strap. Version with ventilation holes and long peak. Low weight combined with high-comfort helmet harness and unique three-point helmet harness depth adjustment ensure perfect fitting to any head size. With light shell made of ABS and innovative design the EVO LITE Basic helmet exceeds requirements of EN 397. COLOUR:
REF. NO.: 01
WHITE
REF. NO.: 02
YELLOW
PARAMETERS Weight:
EVO LITE HIGH
Industrial safety helmet
EN 397
Ref. no.:
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
6
300 g
HA 005, HA 006
Light safety helmet EVO LITE Basic. Size adjustment by strap. Version with ventilation holes and long peak. Low weight combined with high-comfort helmet harness and unique three-point helmet harness depth adjustment ensure perfect fitting to any head size. With light shell made of ABS and innovative design the EVO LITE Basic helmet exceeds requirements of EN 397. COLOUR:
REF. NO.: 01
WHITE
REF. NO.: 04
REF. NO.: 02
YELLOW
REF. NO.: 05
ORANGE
REF. NO.: 03
DARK BLUE
REF. NO.: 06
GREEN
RED
PARAMETERS Weight:
2
6
Industrial safety helmets, eye and hearing protection
300 g
WWW.PROTEKT.COM.PL
MONTANA
Industrial safety helmet
EN 397
Ref. no.:
HA 008
RETRACTABLE GOGGLES
COMFORTABLE ADJUSTMENT
COLOUR:
Protective helmet is made of polycarbonate which provides its resistance to damage and very low weight. The helmet is comfortable in use, and fits to the head shape and size – it is fitted with six-point webbing harness and includes a sweat band. Has closable ventilation holes. At both sides, slots for mounting hearing protection are provided..
REF. NO.: 01
ORANGE
NR. KAT: 05
BLUE
REF. NO.: 02
YELLOW
REF. NO.: 06
WHITE
REF. NO.: 03
RED
PARAMETERS
Weight:
490 g
On the inner side, the helmet is fitted with standard transparent polycarbonate goggles. Also tinted goggles are available. This helmet is recommended for scaffolding fitters, tree climbers, crane operators; does not limit user’s visibility and makes user comfortable when looking up With four-point chin strap the helmet is particularly comfortable in use when performing overhead works.
Industrial safety helmets, eye and hearing protection
6
6
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
OPTION! TINTED GOGGLES
3
POLE CLIMBER
Protective helmet for climbing
EN 397 / EN 124925.7
Ref. no.:
HA 009
The Pole Climber protective helmet for pole climbers, scaffolding fitters and people working at height. Made of polyethylene; absorbs vibrations perfectly. Has two side holes for hearing protection. The helmet is fitted with comfortable six-point strap harness and very absorbent sweat band. Lock VOSS with nut is designed for size adjustment between 51 and 64cm. Tested at low temperature of -20°C COLOUR:
REF. NO.: 01
ORANGE
REF. NO.: 04
GREEN
REF. NO.: 02
YELLOW
REF. NO.: 05
DARK BLUE
REF. NO.: 03
RED
REF. NO.: 06
WHITE
PARAMETERS
Weight:
250 g
COMFORTABLE ADJUSTMENT BETWEEN 51 AND 64CM
Industrial safety helmet
EN 397
Ref. no.:
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
6
VISOR LIGHT
HA 010
Comfortable Visior Light protective helmet with integrated visor, also for users wearing glasses. The VisiorLight protective helmet is fitted with unique six-point harness depth adjustment and very absorbent sweat band. Integrated polycarbonate visor. Size adjustment between 51 and 64cm. Tested at low temperature of -30°C. COLOUR:
REF. NO.: 01
ORANGE
REF. NO.: 04
GREEN
REF. NO.: 02
YELLOW
REF. NO.: 05
DARK BLUE
REF. NO.: 03
RED
REF. NO.: 06
WHITE
RETRACTABLE GOGGLES
PARAMETERS COMFORTABLE ADJUSTMENT BETWEEN 51 AND 64CM
4
6
Industrial safety helmets, eye and hearing protection
Weight:
475 g
WWW.PROTEKT.COM.PL
HA 006 11
Hearing protectors
EN 397
Ref. no.:
HA 006 11
PARAMETERS
Weight:
HA 006 12
Mesh face shield
EN 397
Ref. no.:
300 g
6
Mesh face shield ensures general protection against particles moving at 12m/s. The face shield comes out with mounting clamps included.
PARAMETERS
Weight:
165 g
Industrial safety helmets, eye and hearing protection
6
5
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
HA 006 12
HA 006 13
Polycarbonate face shield Ref. no.:
HA 006 13
Provides protection against particles of moderate energy and moving at 120m/s, and liquid and molten metal splashes, and also arcing. Optical properties of the shield meet requirements of optical class 1 (the highest).
PARAMETERS
Weight:
HA 006 14
Face shield against arcing
EN 166
Ref. no.:
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
6
125 g
HA 006 14
Provides protection against particles of moderate energy and moving at 120m/s, and liquid and molten metal splashes, and also arcing. Optical properties of the shield meet requirements of optical class 1 (the highest).
PARAMETERS
Weight:
6
6
Industrial safety helmets, eye and hearing protection
155 g
WWW.PROTEKT.COM.PL
HA 006 15
Acetate face shield, transparent Ref. no.:
HA 006 15
Provides protection against particles of low energy and moving at 45m/s, and liquid splashes. Optical properties of the shield meet requirements of optical class 1 (the highest). The face shield comes out with mounting clamps included. PARAMETERS
Weight:
155 g
HA 006 16
Polycarbonate face shield
EN 397
Ref. no.:
6
Provides protection against particles of low energy and moving at 45m/s, and liquid splashes. The shield can be used for gas welding. In case of other welding methods face shield of much darker visor is required. Optical properties of the shield meet requirements of optical class 1 (the highest). PARAMETERS
Weight:
155 g
Industrial safety helmets, eye and hearing protection
6
7
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
HA 006 16
HA 006 10 Ref. no.:
HA 006 10
HA 006 17
HA 008 10 Ref. no.:
Harness for helmet EVO LITE
Ref. no.:
HA 006 17
8
Industrial safety helmets, eye and hearing protection
HA 008 10
HA 008 17 Ref. no.:
Sweat band for helmet Montana
Harness for helmet Montana
HA 008 17
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
6
Sweat band for helmet EVO LITE
6
WWW.PROTEKT.COM.PL
HA 006 18
Reflective stickers for helmet EVO LITE
EN 397
Ref. no.:
HA 006 18
Reflective stickers for helmet EVO LITE
for mounting HA 006 19 Clamp shields on helmet EVO LITE HA 006 30 Ref. no.:
HA 006 19
PARAMETERS
Weight:
Ref. no.:
6
HA 006 30
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
EN 397
Chin strap for helmet EVO LITE
PARAMETERS
45 g
Weight:
25 g
Industrial safety helmets, eye and hearing protection
6
9
CUPPIE 1
Light industrial safety helmet
EN 812
Ref. no.:
HA 131
COLOUR VERSIONS
RED DARK GREEN BLUE BLACK WHITE
PARAMETERS Industrial safety helmet intended for head protection against impacts by solid stable objects. Manufactured as a textile peaked cap equipped with protective pad. The cap has length-wise ventilation holes protected by polyester mesh, hard peak with polyamide pad and cotton adjustment strap at the back. Head size: 55 - 62cm.
INDUSTRIAL SAFETY HELMETS, EYE AND HEARING PROTECTION
6
Weight:
220 g
Head size:
55 - 62 cm
CUPPIE 2
Light industrial safety helmet
EN 812
Ref. no.:
HA 132
COLOUR VERSIONS
HV ORANGE HV YELLOW/GREEN RED GREEN DARK BLUE BLACK GREY BLUE WHITE
PARAMETERS Light industrial safety helmet with protective pad. Provides head protection against impacts by solid objects or structural elements. Not suitable for protection against falling objects. Size adjusted by adjustment strap at the back.
10
6
Industrial safety helmets, eye and hearing protection
Weight:
235 g
Head size:
56 - 61 cm
Peak length:
5 cm
WWW.PROTEKT.COM.PL
Work ropes and work positioning lanyards Work ropes
7-2
Work positioning lanyard
7-6
7 Work ropes and work positioning lanyards
7
1
TU 130
Work rope
EN 1891 Class A
Ref. no.:
PESPA 13,5-K-16
Spliced Eye - EN 1891 certified eye splicing min. strength with loops 15kN breaking force 24kN
The rope is intended mainly for arborist works. Features large diameter enabling larger strength to damages and adequate flexibility for working with pulleys, connectors and other equipment. Red and white colour provides good visibility
WORK ROPES AND WORK POSITIONING LANYARDS
7
PARAMETERS
AVAILABLE COLOUR VERSIONS
Rope diameter:
Ø 13,5 mm
Weight:
130 g/m
Kernmantle slip:
0 mm
Drop-off number:
1
Relative elongation:
3% (50-150 kg)
Shrinkage:
0.5 %
Min. static strength:
22 kN
Breaking strength:
37 kN
Core:
polyamide
Kernmantle:
polyester 01
2
7
Work ropes and work positioning lanyards
REF. NO.:
ROPE DIAMETER
PesPa 13,5-K-16
13 mm
WWW.PROTEKT.COM.PL
TU 131
Work rope
EN 1891 Class A
Ref. no.:
PA 100
AVAILABLE COLOUR VERSIONS
WORK ROPES AND WORK POSITIONING LANYARDS
7
01
PARAMETERS
Rope diameter:
Ø 10 mm
Ø 10,5 mm
Ø 11 mm
Ø 11,5mm
Ø 12 mm
68 g/m
72 g/m
76 g/m
103 g/m
98 g/m
Relative elongation:
3,4 %
2,9%
3,3 %
1,8%
3,9 %
Kernmantle shift:
0,9 %
0,5%
1%
1,3%
0,6 %
Weight:
Min. Static strength:
22 kN
22 kN
22 kN
22 kN
22 kN
Breaking strength:
29,10 kN
29,8 kN
30,60 kN
25,7 kN
32,10 kN
Material:
polyamide
polyamide
polyamide
polyester
polyamide
REF. NO.:
Pa 100-10-K-24
Pa 100-105-K-24
Pa 100-11-K-24
Pa 100-115-K-24
Pa 100-12-K-24
Work ropes and work positioning lanyards
7
3
LL
Work rope Ref. no.:
LL 060, LL 080, LL 110, LL 120, LL 140
AVAILABLE COLOUR VERSIONS
WORK ROPES AND WORK POSITIONING LANYARDS
7
01
02
03
04
05
06
ROPES MADE ON SPECIAL REQUEST
If no colour version if specified, rope to be sent is colour version no. 01
PARAMETERS Rope diameter:
Ø 6 mm
Ø 8 mm
Ø 10,5 mm
Ø 12 mm
Ø 14 mm
Weight:
30 g/m
51 g/m
92 g/m
108 g/m
140 g/m
Relative elongation:
2,30 %
1,80 %
1,15 %
1,20 %
1,20 %
Kernmantle shift:
0,6 %
0,8 %
0,4 %
0,5 %
0,3 %
Breaking strength:
11,06 kN
15,46 kN
27,41 kN
37,07 kN
39,25 kN
Material:
polyester
polyester
polyester
polyester
polyester
REF. NO:
LL 060
LL 080
LL 110
LL 120
LL 140
4
7
Work ropes and work positioning lanyards
WWW.PROTEKT.COM.PL
TU 132
Cargo rope Ref. no.:
TU 132
The rope is fully made of high-strength polyester. Formed as 12-fibre braid rope. Intended only for cargo transportation. Bright colour provides good visibility. Perfect as a work positioning rope for hydrants or pulleys. PARAMETERS
Rope diameter:
TU 132 018
Ø 16 mm
Ø 18 mm
Strength:
37 kN
45 kN
Material:
polyester
polyester
REF. NO.:
ROPE DIAMETER
TU 132 016
Ø 16 mm
TU 132 018
Ø 18 mm
Work rope
7 Ref. no.:
TU 135
WORK ROPES AND WORK POSITIONING LANYARDS
TU 135
TU 132 016
PARAMETERS Rope diameter:
Ø 10 mm
Strength:
17 kN
Material:
aramid, polyester
REF. NO.:
ROPE DIAMETER
TU 135
Ø 10 mm
Work ropes and work positioning lanyards
7
5
TU 145
Work positioning lanyard Ref. no.:
TU 145
PARAMETERS
Rope diameter:
Ø 20 mm
MBS:
124 kN
WLL:
30 kN
Material:
polyester
TU 145
Material:
TU 327
WORK ROPES AND WORK POSITIONING LANYARDS
7
Splicing bodkin kit Ref. no.:
TU 327
PARAMETERS
Material:
blue-anodized aluminium
Diameters:
TU 327 020 - Ø 24,00 mm TU 327 018 - Ø 22,00 mm TU 327 016 - Ø 18,00 mm TU 327 014 - Ø 16,00 mm TU 327 012 - Ø 14,00 mm TU 327 010 - Ø 12,00 mm TU 327 008 - Ø 9,00 mm TU 327 006 - Ø 6,00 mm
6
7
Work ropes and work positioning lanyards
Kit comprising 8 bodkins with case for rope splicing.
TU 327
WWW.PROTEKT.COM.PL
Rope edge guards and rope sleeves Rope edge guards
8-2
Rope sleeves
8-7
8
AX 902
Rope edge guard
AX 903
Ref. no.: AX 902
Rope edge guard Ref. no.: AX 903
AY 025 rope limiter included
AY 025 rope limiter included
ROPE EDGE GUARDS AND ROPE SLEEVES
8
AX 902 are guards providing protection of roof parapet elements and rope or webbing against sharp-edged parapet elements. Parts are made of stainless steel. The parts are suitable for use with one textile rope or webbing. The device is mounted to structural elements by connectors AZ 011.
AX 903 are guards providing protection of roof parapet elements and rope or webbing against sharp-edged parapet elements. Parts are made of stainless steel. The parts are suitable for use with one or two textile ropes or webbings. The device is mounted to structural elements by connectors AZ 011.
PARAMETERS
PARAMETERS
Material:
stainless steel
Material:
stainless steel
Dimensions:
120 x 175,5 mm
Dimensions:
180 x 175,5 mm
Weight:
0,85 kg
Weight:
1,30 kg
REF. NO.:
REF. NO.:
AX 902
AX 903
2
8
Rope edge guards and rope sleeves
WWW.PROTEKT.COM.PL
AX 904
Rope edge guard Ref. no.: AX 904
ROPE EDGE GUARDS AND ROPE SLEEVES
8
PARAMETERS
Temperature range:
-30°C / +50°C
Material:
aluminium, brass, steel
REF. NO.:
AX904/1 AX904/3 AX904/4
Rope edge guards and rope sleeves
8
3
AX 905
Rope edge guard Ref. no.: AX 905
80
24
Ø 25
Ø 30
8
Ø1
8
Ø1
8
Ø1
8
Ø1
22,5
22,5
80
24
15
80
12
22,5
100 125,2
ROPE EDGE GUARDS AND ROPE SLEEVES
8
PARAMETERS
Max. length:
300 mm
Weight:
620 g
Material:
steel, polyamide
Temperature range:
-30°C / +50°C
REF. NO.:
AX 905
4
8
Rope edge guards and rope sleeves
WWW.PROTEKT.COM.PL
AX 907
Rope edge guard Ref. no.: AX 907
KIT AX 907/1 single module
119
47,5
90
16
KIT AX 907/3 three modules
300 195 90
16
ROPE EDGE GUARDS AND ROPE SLEEVES
119
47,5
8
KIT AX907/4
PARAMETERS
four modules
Temperature range:
-30°C / +50°C
Material:
aluminium, stainless steel, steel
405 300 195
REF. NO.:
NUMBER OF MODULES
AX 907/1
1
AX 907/3
3
AX 907/4
4
119
47,5
90
16
Rope edge guards and rope sleeves
8
5
AX 908
Rope edge guard Ref. no.: AX 908
40
250
16
155
1
15
30
30
40
50
16
R2 5
110
6
4
4
10
R1
R165
4 R1
20
R2
0
8
4x
16
1
50
2
ROPE EDGE GUARDS AND ROPE SLEEVES
4
95
100
210
250
3
29,6
6
Rope edge guard AX 908 is designed for use with a single rope or more ropes. Light aluminium design facilitates transport and installation. The guard has additional boreholes for roller mounting. Rubber padded base facilitates installation on smooth surfaces and protects them against damage.
7
10
89
20
105 145
PARAMETERS
Dimensions:
250 x 250 x 155 mm
Weight:
1,8 kg
Material:
aluminium, stainless steel, steel
Temperature range:
-30°C / +50°C
REF. NO.:
AX 908
6
8
Rope edge guards and rope sleeves
WWW.PROTEKT.COM.PL
AX 901
Rope sleeve
TU 320
Rope cover Ref. no.: TU 320
Ref. no.: AX 901
ROPE EDGE GUARDS AND ROPE SLEEVES
8
Rope sleeve AX 901 for cooperation with work rope on rope grab complying with EN 353-2 (LINOSTOP, ACOIO), preventing rope wearing on roof edges.
PARAMETERS
Material:
PARAMETERS
polyester fabric / PVC
Material:
natural leather
REF. NO.:
REF. NO.:
WEIGHT
AX 901
TU 320
0,29 kg
Rope edge guards and rope sleeves
8
7
TU 321
Rope sleeve
TU 322
Rope sleeve Ref. no.: TU 322
Ref. no.: TU 321
AY 025 rope limiter included
ROPE EDGE GUARDS AND ROPE SLEEVES
8
Rope guard TU 321 made of leather and PVC is suitable for cooperation with rope on rope grab complying with EN 353-2 (LINOSTOP II, ACOIO), preventing the rope from wearing.
Rope sleeve TU 322 made of leather with velcro straps suitable for cooperation with rope on rope grab complying with EN 353-2 (LINOSTOP II, ACOIO), preventing the rope from wearing.
PARAMETERS
PARAMETERS
Material:
leather and PVC
Material:
natural leather
REF. NO.:
LENGTH
REF. NO.:
LENGTH
TU 321 50
50 cm
TU 322 50
50 cm
TU 321 100
100 cm
TU 322 100
100 cm
8
8
Rope edge guards and rope sleeves
WWW.PROTEKT.COM.PL
TU 323
Rope sleeve Ref. no.: TU 323
AY 025 rope limiter included
8
ROPE EDGE GUARDS AND ROPE SLEEVES
for lace, thin line storage
PARAMETERS
The TU 323 pad is designed as a multifunctional patch enabling i.e. comfort storage of laces and thin lines, protecting sharp edges when using lifelines, guarding rope ends against damage by pulley blocks, etc.
Material:
PS + PCV
Available colours:
orange and khaki
REF. NO.:
TU 323
Rope edge guards and rope sleeves
8
9
WORK ROPE INSTALLATION EQUIPMENT
9
Work rope installation equipment Insulating telescopic poles
9-2
Heads and working hooks
9-4
Cable clamps for cable installers
9 - 10
9
Each pole ends with a thread M10
POLE UPPER SECTION
1m
DT 200
WORK ROPE INSTALLATION EQUIPMENT
9
minimum length
maximum length
INSULATING PART MARKER
INSULATING TELESCOPIC POLES Telescopic poles are tested at High Voltage Laboratory Institute of Power Engineering in Warsaw and are approved by the Polish Accreditation Centre. ACCREDITATION CERTIFICATE (RESEARCH LABORATORY) NO. AB 272
PARAMETERS
Work range:
8,88 m
Weight:
4,17 kg
Maximum length:
7,38 m
Minimum length:
1,96 m
Working height:
30 kV
Admissible load of pole end in horizontal configuration: Admissible load of pole end in vertical configuration:
Locking of individual pole sections is possible in any position. Cooperates working with hooks and rope installers, acoustic sensors and other equipment compatible with UDI head. Possibility of extension section use with UDI (DT 900) and DT 800 head The pole comes without UDI head - DT 800.
2
9
Work rope installation equipment
1,10 kg 20,00 kg
Mechanical compressive strength:
200 N
Mechanical tensile strength:
200 N
Mechanical torsional strength:
5 Nm
Mechanical bending strength:
80 Nm
REF. NO.:
DT 200 with bag AXDT 200
WWW.PROTEKT.COM.PL
DT 202
AXDT 200
200 cm
ho
le dia Ø me 70 te m r m
DT 201
9
7,50 m
5,78 m
2,70 kg
1,90 kg
6,00 m
4,28 m
1,85 m
1,80 m
30 kV
30 kV
1,70 kg
2,38 kg
20,00 kg
20,00 kg
200 N
200 N
200 N
200 N
5Nm
5Nm
100Nm
100Nm
Material:
PVC
Length:
2,0 m
Hole diameter:
70 mm
REF. NO.:
REF. NO.:
REF. NO.:
DT 200 with bag AXDT 200
DT 202 with bag AXDT 200
AXDT 200
Work rope installation equipment
WORK ROPE INSTALLATION EQUIPMENT
PARAMETERS
9
3
DT 900 Extension section with UDI head “Push-in” mounting
DT 501 Universal telescopic pole adapter for connectors. Threaded fitting, screw M10, comes without screw.
Working hooks DT 800 UDI head “Push-in” mounting DT 650 01
DT 650 02
Hanging hooks “Push-in” mounting
DT 651 01
DT 600 01
9
DT 600 02
DT 600 01
DT 600 02
Rope installers “Push-in” mounting
DT 651 02
WORK ROPE INSTALLATION EQUIPMENT
DT 610
DT 720 01
DT 720 02 DT 600 04
COMPONENTS OF WORK ROPE INSTALLER 4
9
Work rope installation equipment
DT 600 03 Hanging hooks Threaded fitting
WWW.PROTEKT.COM.PL
DT 800
DT 900
UDI head
Extension section for insulating poles DT 200, DT 201 i DT 202.
DT 800 UDI HEAD
Extension section
Extension section for insulating poles DT 200, DT 201 i DT 202.
1032 mm
212 mm
DT 900 EXTENSION SECTION
9
INSULATING POLE
INSULATING POLE
PARAMETERS
WORK ROPE INSTALLATION EQUIPMENT
Enables mounting of working ends such as working hooks or rope installers. PARAMETERS
Dimensions:
Ø 39 x 212 mm
Dimensions:
Ø 39 x 1032 mm
Weight:
~0,20 kg
Weight:
~0,45 kg
Material:
pole - glass fibre fittings - PA + 30% glass fibre
Material:
pole - glass fibre fittings - PA + 30% glass fibre
REF. NO.:
WEIGHT
REF. NO.:
WEIGHT
DT 800
0,20 kg
DT 900
0,45 kg
Work rope installation equipment
9
5
DT 600
DT 601
Hanging hook
Cooperates with working hook DT 610, DT 650 i DT 651.
DT 600 01 “Push-in” mounting
Hanging hook
Cooperates with working hook DT 610, DT 650 i DT 651 and cable clamp AT 191S.
DT 600 03 Threaded fitting
DT 601 01 - insulated “Push-in” mounting
9 DT 601 02 - non-insulated “Push-in” mounting
WORK ROPE INSTALLATION EQUIPMENT
DT 600 02 “Push-in” mounting
DT 600 04 Threaded fitting
Hanging hook for UDI head. Cooperates with working hook DT 610, DT 650 and DT 651 and cable clamp AT 191S.
Hanging hook for UDI head or telescopic pole.
PARAMETERS DEVICE VERSIONS
DT 601 01
DT 601 02
Material:
galvanized steel + PVC
galvanized steel
Weight:
0,20 kg
0,15 kg
WEIGHT
Push-in mounting: DT 600 01 - hanging hook - insulated
0,25 kg
DT 600 02- hanging hook - non-insulated
0,20 kg
Threaded fitting M10:
REF. NO.:
DT 600 03 - hanging hook - insulated
0,15 kg
DT 601 01 - working hook - insulated
DT 600 04 - hanging hook - non-insulated
0,15 kg
DT 601 02 - working hook - non-insulated
6
9
Work rope installation equipment
WWW.PROTEKT.COM.PL
DT 650
DT 651
Working hook, small
EN 795:2012
Working hook, large
EN 795:2012 EN 795 :2012
Work hooks obtained a certificate compliance with the standard EN 795:2012
DT 650 01 - insulated
DT 651 01 - insulated
DT 651 02 - non-insulated
DT 650 02 - non-insulated
HOW TO USE?
1
2
3
PARAMETERS
Material:
PARAMETERS
DT 650 01
DT 650 02
galvanized steel + PVC
galvanized steel
Opening: Weight:
WORK ROPE INSTALLATION EQUIPMENT
9
DT 651 01
DT 651 02
galvanized steel + PVC
galvanized steel
Opening:
65 mm 0,6 kg
Material:
0,5 kg
Weight:
85 mm 0,95 kg
REF. NO.:
REF. NO.:
DT 650 01 - working hook - insulated
DT 651 01 - working hook - insulated
DT 650 02 - working hook - non-insulated
DT 651 02 - working hook - non-insulated
0,9 kg
Work rope installation equipment
9
7
DT 610
Working hook, stainless EN 795:2012 type B
E
E
C C
D
D
mm 11 0
WORK ROPE INSTALLATION EQUIPMENT
9
PARAMETERS
Opening:
New working hook DT 610 made of stainless steel, with opening 110mm is a connector and a component of fall arrest system. Fitted with gravitational opening locking to ensure safe us of the device.
8
9
Work rope installation equipment
110 mm
Weight:
800 g
Material:
stainless steel
Strength:
25 kN
REF. NO.:
DT 610
WWW.PROTEKT.COM.PL
DT 720
Rope installer
DT 720 01 - insulated “push-in” mounting
DT 720 02 - non-insulated “push-in” mounting
HOW TO USE?
1
2
3
4 max. max. max. 100 100 100
max. 130
420,50 420,50 420,50
9
WORK ROPE INSTALLATION EQUIPMENT
80
80 80 80
420,50
20
max. 130 max. 130 max. 130
max. 100 20 20 20
192 192 192
192 PARAMETERS
Rope installer DT 720 with a handle for UDI head of a telescopic pole. Cooperates with telescopic pole DT 200 and head DT 800. Intended for cooperation with a rope 6-10mm dia. Installer is available in insulated and non-insulated version.
DT 720 01
DT 720 02
Material:
stainless steel + PVC
stainless steel
Weight:
1,3 kg
1,1 kg
REF. NO.:
DT 720 01 - insulated DT 720 02 - non-insulated
Work rope installation equipment
9
9
DT 501
Universal connector installer
DT 100
Auxiliary rope for rope installer
PARAMETERS
Material:
polyamide
DEVICE VERSION
HOW TO USE?
DT 100 - rope ø 8 mm DT 100 - rope ø 10,5 mm DT 100 - rope ø 12 mm
1
2
DT 100 - rope ø 14 mm
DT 750
9
Auxiliary rope for rope installer
WORK ROPE INSTALLATION EQUIPMENT
Ref. no.: DT 750
One rope end protected by a film. PARAMETERS PARAMETERS Weight:
30 g
Material:
stainless steel
Material:
REF. NO.:
DEVICE VERSION
DT 501
DT 750 - lina ø 8 mm
10
9
Work rope installation equipment
polyamide
WWW.PROTEKT.COM.PL
AT 191 S
Cable clamp for telescopic pole
EN795 TYP B
INCREASED STRENGTH min. 30 kN
Installation
AT191S
AZ011
DT601
EN362 B
DT800
EN 353-2 (np. AC080)
Cable clamp AT 191 S is a component of fall protection equipment. The clamp should be used as a transportable temporary anchor device type B, enabling connection of connecting and absorbing device to a structural anchor point on vertical structures or concrete poles. Cable clamp is formed by a section of stainless steel cable, 8 mm dia and 0.6 to 10m long. The clamp has loops of various diameters at both ends enabling for looping without using any additional connectors. One of the loops is fitted with a polyamide skid to facilitate the rope sliding. The skid provides support for hanging hook. In cooperation with hook DT 601 + DT 800 + DT 200, the skid enables safe assembly on steel or concrete electric poles.
DT200
9
Material:
stainless steel, copper, polyamide
Static strength:
min. 30 kN
WORK ROPE INSTALLATION EQUIPMENT
PARAMETERS
SPECIAL FEATURES
Protection of 1 PERSON REF. NO.:
LENGTH
AT 191S 060
600 mm
AT 191S 100
1000 mm
AT 191S 200
2000 mm
AT 191S 300
3000 mm
AT 191S 500
5000 mm
AT 191S 1000
NET PRICE
10 000 mm
AT 191S xx - any length up to 10m as ordered
Work rope installation equipment
9
11
WORK POSITIONING BELTS AND DEVICES
10
Work positioning belts and devices Work positioning belts
10 - 2
Work positioning devices
10 - 8
Work positioning webbing lanyards
10 - 19
10 Work positioning belts and devices
10
1
PB 10
Work positioning belt
EN 358
Belt fitted with ergonomically profiled padding, connecting and adjusting buckle and side attachment buckles. Work positioning belt PB 10 complements fall protection equipment and prevents falls from height during works at poles, trees, building structures, etc. PARAMETERS SIZE
WEIGHT
galvanized steel
M-XL (medium)
460 g
polyester
XXL (large)
480 g
Webbing:
polyamide/polyester 45mm
Buckles: Threads:
PB 11
Work positioning belt
EN 358
WORK POSITIONING BELTS AND DEVICES
10
Belt fitted with ergonomically profiled padding, connecting and adjusting buckle, side attachment buckles and dorsal attachment buckle. Work positioning belt PB 11 complements fall protection equipment and prevents falls from height during works at poles, trees, building structures, etc. PARAMETERS Webbing:
polyamide/polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
2
10
Work positioning belts and devices
SIZE
WEIGHT
M-XL (medium)
470 g
XXL (large)
490 g
WWW.PROTEKT.COM.PL
PB 20
Work positioning belt
EN 358
Belt fitted with ergonomically profiled padding, connecting and adjusting buckle and side attachment buckles. Work positioning belt PB 20 complements fall protection equipment and prevents falls from height during works at poles, trees, building structures, etc. PARAMETERS Webbing:
polyamide/polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
SIZE
WEIGHT
M-XL (medium)
670 g
XXL (large)
690 g
NEW
PB 30
Work positioning belt
EN 358
WORK POSITIONING BELTS AND DEVICES
10
PARAMETERS Webbing:
polyamide/polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
SIZE
WEIGHT
M-XL (medium)
710 g
XXL (large)
780 g
Work positioning belts and devices
10
3
PB 31
Work positioning belt
EN 358
WORK POSITIONING BELTS AND DEVICES
10
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Work positioning belt PB 31 for firemen. Belt fitted with ergonomically profiled padding, connecting and adjusting buckle, side attachment buckles and attachment webbing lanyard. Work positioning belt PB 31 complements fall protection equipment and prevents falls from height during works at poles, trees, building structures, etc.
PARAMETERS Webbing:
polyamide/polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
4
10
Work positioning belts and devices
SIZE
M-XL (medium)
XXL (large)
WWW.PROTEKT.COM.PL
PB 60
Work positioning belt
EN 358
Work positioning belt PB 60 is made from a single polyester webbing strip connected by an aluminium buckle. Fitted with a welt to enable smooth belt length adjustment (length between 0.45m and 2.0m). Chain with steel connector AZ 002 at the end.Work positioning belt PB 60 complements fall protection equipment and prevents falls during works at height.
SIZE S-XXL (large)
PB 70
Work positioning belt
EN 358, EN 813
PRODUCT PRESENTATION protekt.co/pb70
Belt fitted with ergonomically profiled padding, connecting and adjusting buckle, side attachment buckles and attachment point for work in a harness. Work positioning belt / sit harness PB 70 complements fall protection equipment and prevents falls from height during works at poles, trees, building structures, etc. PARAMETERS Webbing:
polyamide/polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
SIZE
WEIGHT
M-XL (medium)
990 g
XXL (large)
1020 g
Work positioning belts and devices
10
5
10
WORK POSITIONING BELTS AND DEVICES

TH 20
Harness for tree climbers
EN 358, EN 813 Work positioning belt for tree climbers TH 20 fitted with ergonomically profiled padding, adjusting buckles, side attachment buckles and attachment point for work in a harness complying with EN 813. The belt includes aluminium adjusting buckles. There is no risk of an accidental release. Belt TH 20 is a basic equipment for works at height, mainly at trees, poles, building structures, etc.
WORK POSITIONING BELT WITH SIDE ATTACHMENT BUCKLES
ADJUSTING BUCKLE
PARAMETERS
Material:
TH 30
PES, aluminium
REF. NO.:
SIZE
WEIGHT
TH 120 01
M-XL
1450 g
TH 120 02
XXL
1490 g
Harness for tree climbers
EN 358, EN 813
10
Work positioning belt for tree climbers TH 30 fitted with ergonomically profiled padding, adjusting buckles, side attachment buckles and attachment point for work in a harness complying with EN 813. The belt includes automatic connecting and adjusting buckles Comfortable wearing and removal. Belt TH 30 is a basic equipment for works at height, mainly at trees, poles, building structures, etc.
WORK POSITIONING BELTS AND DEVICES
WORK POSITIONING BELT WITH SIDE ATTACHMENT BUCKLES
PARAMETERS AUTOMATIC ADJUSTING BUCKLE
6
10
Work positioning belts and devices
Material:
PES, aluminium
REF. NO.:
SIZE
WEIGHT
TH 130 01
M-XL
1780 g
TH 130 02
XXL
1820 g
WWW.PROTEKT.COM.PL
TH 50
Work positioning belt with sit harness
EN 358, EN 813
WORK POSITIONING BELT WITH SIDE ATTACHMENT BUCKLES
ADJUSTING BUCKLES
AUTOMATIC CONNECTING AND ADJUSTING BUCKLES
10
WORK POSITIONING BELTS AND DEVICES
INTEGRATED SEAT
Work positioning belt for tree climbers TH 50 with an integrated seat. Equipped with ergonomically profiled padding, adjusting buckles, side attachment buckles and attachment point for work in a harness complying with EN 813. The belt includes automatic connecting and adjusting buckles Comfortable wearing and removal. Belt TH 50 is a basic equipment for works at height, mainly at trees, poles, building structures, etc. PARAMETERS Webbing:
polyamide/polyester 45mm
Buckles:
galvanized steel
Threads:
polyester
REF. NO.:
SIZE
WEIGHT
TH 150 01
M-XL
2500 g
TH 150 02
XXL
2600 g
Work positioning belts and devices
10
7
PROT 2
Work positioning device
EN 358
PROTECTIVE TUBE
KERNMANTLE ROPE
ADJUSTER
WORK POSITIONING BELTS AND DEVICES
10
PARAMETERS
Kernmantle rope:
polyester rope Ø 14mm dia
Adjuster:
stainless steel, connector AZ 011
Protective tube:
coated fabric
Rope ends:
free end, thimble with connector AZ 002
REF. NO.:
LENGTH
AF 201 020
2,0 m
AF 201 025
2,5 m
AF 201 030
3,0 m
AF 201 040
4,0 m
AF 201 050
5,0 m
AF 201 100
10,0 m
AF 201 200
20,0 m
8
10
Work positioning belts and devices
Work positioning device PROT 2 comes with steel connectors AZ 002 (opening: 19mm) and AZ 011 (opening: 18mm).
WWW.PROTEKT.COM.PL
PROT 3
Work positioning device
EN 358
Work positioning device PROT 3 comes with steel connectors AZ 002 (opening: 19mm) and AZ 011 (opening: 18mm). PARAMETERS
10 polyester rope Ø 14mm dia
Adjuster:
aluminium alloy, connector AZ 011
Protective tube:
coated fabricw
Rope ends:
free end, thimble with connector AZ 002
REF. NO.:
LENGTH
AF 130 020
2,0 m
AF 130 025
2,5 m
AF 130 030
3,0 m
AF 130 050
5,0 m
AF 130 100
10 m
AF 130 150
15 m
AF 130 200
20 m
Work positioning belts and devices
WORK POSITIONING BELTS AND DEVICES
Kernmantle rope:
10
9
PROT 4
Work positioning device
EN 358
PROTECTIVE TUBE
HOW TO USE? KERNMANTLE POLYESTER ROPE Ø 12MM
ROPE FREE END
WORK POSITIONING BELTS AND DEVICES
10
PROT 4 ADJUSTER
AZ 011 CONNECTOR EN 362
Work positioning device PROT 4 comes with steel connectors AZ 002 (opening: 19mm) and AZ 011 (opening: 18mm).
PARAMETERS
Kernmantle rope:
kernmantle polyester rope Ø 12mm dia
Adjuster:
aluminium, connector AZ 011
Protective tube:
coated fabric
Rope ends:
free end, thimble with connector AZ 002
10
10
Work positioning belts and devices
AZ 002 galvanized steel opening: 19mm weight: 220g
REF. NO.:
LENGTH
AF 104 020
2,0 m
AF 104 025
2,5 m
AF 104 030
3,0 m
AF 104 040
4,0 m
AF 104 050
5,0 m
AF 104 100
10,0 m
AF 104 200
20,0 m
WWW.PROTEKT.COM.PL
2
1
Attach connector with rope adjuster to right attachment buckle on work positioning belt (or to the left for a left-handed user).
Wrap the rope around a structural element and attach connector with rope adjuster to left attachment buckle on work positioning belt (or to the right for a left-handed user).
3
Secure connector access lock by locking gear
Using rope adjuster, adjust the rope length and tensioning to provide stable working position and limit the user’s free fall distance. Free fall distance should not be greater than 0.6m.
Attach connector to anchor point located above the belt.
2
Using rope adjuster, adjust the rope length and tensioning to provide stable working position and limit the user’s free fall distance. Free fall distance should not be greater than 0.6m.
Work positioning belts and devices
10
11
WORK POSITIONING BELTS AND DEVICES
1
10
PROT 6
Work positioning device
EN 358
PARAMETERS
PROT 10
Kernmantle rope:
polyester twisted rope Ø 16mm dia
Adjuster:
aluminium alloy
Protective tube:
coated fabric
Rope ends:
thimble
REF. NO.:
LENGTH
AF 106 020
2,0 m
AF 106 025
2,5 m
AF 106 030
3,0 m
AF 106 050
5,0 m
AF 106 100
10,0 m
AF 106 150
15,0 m
AF 106 200
20,0 m
Work positioning device
EN 358
10
PRODUCT PRESENTATION protekt.co/prot10
WORK POSITIONING BELTS AND DEVICES
Work positioning device PROT 10 comes with steel connectors AZ 060 (opening: 21mm) and AZ 011 (opening: 18mm). PARAMETERS
12
10
Work positioning belts and devices
Kernmantle rope:
polyester kernmantle steel cable, 16mm dia
Adjuster:
chrome-plated steel, connector AZ 011
Protective tube:
coated fabric
Rope ends:
strong aluminium crimps, connector AZ 060
REF. NO.:
LENGTH
AF 150 200
2,0 m
AF 150 300
3,0 m
AF 150 400
4,0 m
AF 150 500
5,0 m
WWW.PROTEKT.COM.PL
PROT 10S
Work positioning device
EN 358
PROT 10S for work positioning complying with EN 358 with connectors AZ 060 (opening: 21mm) and AZ 011 (opening: 18mm). PROT 10S is fitted with stainless steel adjuster.
PARAMETERS
Kernmantle rope:
polyester kernmantle steel cable, 16mm dia
Adjuster:
stainless steel, connector AZ 011
Protective tube:
coated fabric
Rope ends:
strong aluminium crimps, connector AZ 060
PROT 11
REF. NO.:
LENGTH
AF 151 200
2,0 m
AF 151 300
3,0 m
AF 151 400
4,0 m
AF 151 500
5,0 m
Work positioning device
EN 358
PRODUCT PRESENTATION
Work positioning device PROT 11 comes with steel connectors AZ 002 (opening: 19mm) and AZ 011 (opening: 18mm).
10
protekt.co/prot11
Kernmantle rope:
kernmantle polyester rope Ø 12mm dia
Adjuster:
nickel-plated steel, connector AZ 011
Protective tube:
coated fabric
Rope ends:
free end, thimble with connector AZ 002
REF. NO.:
LENGTH
AF 101 020
2,0 m
AF 101 025
2,5 m
AF 101 030
3,0 m
AF 101 050
5,0 m
AF 101 100
10,0 m
AF 101 150
15,0 m
AF 101 200
20,0 m
Work positioning belts and devices
10
WORK POSITIONING BELTS AND DEVICES
PARAMETERS
13
PROT 22
Work positioning device
EN 358 Work positioning device PROT 22 comes with steel connectors AZ 002 (opening: 19mm) and AZ 011 (opening: 18mm). PARAMETERS
Kernmantle rope:
kernmantle polyester rope Ă˜ 12mm dia
Adjuster:
stainless steel, connector AZ 011
Protective tube:
coated fabric
Rope ends:
free end, thimble with connector AZ 002
REF. NO.:
LENGTH
AF 222 020
2,0 m
AF 222 025
2,5 m
AF 222 030
3,0 m
AF 222 050
5,0 m
AF 222 100
10,0 m
AF 222 150
15,0 m
AF 222 200
20,0 m
PROT 220FLR
Work positioning device
EN 358 EN362 EN 358
New work positioning device PROT 220FLR fitted with aramid rope resistant to high temperature provided with protective leather sheath. PARAMETERS
WORK POSITIONING BELTS AND DEVICES
10
14
10
Rope:
aramid
Manufacture:
aramid braided core
The diameter of the rope:
11,5 mm
Adjustament:
stainless steel, snap hook az011
Rope end:
free ending, a latched eye with AZ 002 snap hook
Rope protective sheath:
leather 50 cm
Meets the standards:
EN 358:1999 EN 362:2004 EN 358 P.4.1.5
REF. NO.:
LENGTH
AF 222 020
2,0 m
AF 222 025
2,5 m
AF 222 030
3,0 m
AF 222 050
5,0 m
AF 222 100
10,0 m
AF 222 150
15,0 m
AF 222 200
20,0 m
Work positioning belts and devices
WWW.PROTEKT.COM.PL
PROT 30
Work positioning device
EN 358
Work positioning device PROT 30 comes with steel connectors AZ 060 (opening: 21mm) and AZ 011 (opening: 18mm). PARAMETERS
Kernmantle rope:
polyester kernmantle steel cable, 16mm dia
Adjuster:
light alloys, connector AZ 011
Protective tube:
coated fabric
Rope ends:
strong aluminium crimps, connector AZ 060
PROT 40
REF. NO.:
LENGTH
AF 160 200
2,0 m
AF 160 300
3,0 m
AF 160 400
4,0 m
AF 160 500
5,0 m
Work positioning device
EN 358
WORK POSITIONING BELTS AND DEVICES
10
PARAMETERS REF. NO.:
LENGTH
Kernmantle rope:
polyester kernmantle steel cable, 11.4 mm dia
AF 140 200
2,0 m
Adjuster:
chrome-plated steel, connector AZ 011
AF 140 300
3,0 m
Protective tube:
coated fabric
AF 140 400
4,0 m
Rope ends:
strong aluminium crimps
AF 140 500
5,0 m
Work positioning belts and devices
10
15
PROT 90
NEW
Work positioning device
Belt adjuster
Anti-slip overlay
Steel snap hook AZ032DT
Rope guard
PRODUCT PRESENTATION protekt.co/prot90
Rope grab rope Ø 14mm Rope adjuster
WORK POSITIONING BELTS AND DEVICES
10
PROT 90 features unique design that enables user to move along wooden poles in an unobstructed and comfortable manner thanks to stiff, easy-to-lift belt. Belt length adjustment allows for optimum selection of the distance between the user and the pole. In the case the user falls out the device forms a clamp loop disabling an uncontrolled and inert descent.
PARAMETERS
Rope grab rope
polyester rope Ø 14mm dia
Rope grab rope length
2,0 m
Belt adjuster:
galvanized steel
Protective tube:
coated fabric
Flat anti-slip strip:
width 44mm, thickness 6mm, length 1.0m
16
10
Work positioning belts and devices
REF. NO.:
AF 190
WWW.PROTEKT.COM.PL
PROT 70
Work positioning device
EN 358
PARAMETERS REF. NO.:
LENGTH
Kernmantle rope:
polypropylene kernmantle twisted steel cable, Ø 16mm dia
AF 170 200
2,0 m
Adjuster:
stainless steel, connector AZ 011
AF 170 300
3,0 m
Protective tube:
coated fabric
AF 170 400
4,0 m
Rope ends:
aluminium crimps, thimble with connector AZ 060
AF 170 500
5,0 m
WORK POSITIONING BELTS AND DEVICES
10
TU 010
Work positioning device
EN 358
PARAMETERS
TU 011
Kernmantle rope:
polyester kernmantle steel cable, 11.4mm dia
Rope ends:
strong aluminium crimps
Protective tube:
coated fabric
REF. NO.:
LENGTH
TU 010 20
2,0 m
TU 010 30
3,0 m
TU 010 40
4,0 m
TU 010 50
5,0 m
Work positioning device
EN 358
WORK POSITIONING BELTS AND DEVICES
10
PARAMETERS
Kernmantle rope:
polyester kernmantle steel cable, 11.4mm dia
Rope ends:
strong aluminium crimps, one end with aluminium connector AZ032DT with triple locking gear equipped with swivel shackle
Protective tube:
coated fabric
18
10
Work positioning belts and devices
REF. NO.:
LENGTH
TU 011 20
2,0 m
TU 011 30
3,0 m
TU 011 40
4,0 m
TU 011 50
5,0 m
WWW.PROTEKT.COM.PL
AF 500
Work positioning webbing lanyard
EN 358

PRODUCT PRESENTATION protekt.co/af500
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
PARAMETERS
Work positioning webbing lanyard with adjustable length, max. length 2m.
REF. NO.:
AF 500 without connectors Webbing width:
30 mm
AF 600, AF 610
AF 500 with two connectors AZ 011
Work positioning webbing lanyard
EN 358
WORK POSITIONING BELTS AND DEVICES
10
AF 600 - STEEL BUCKLE
Work positioning webbing lanyard with adjustable length, max. length 300cm.
AF 600 without connectors AF 600 with two connectors AZ 002
AF 610 - ALUMINIUM BUCKLE
PARAMETERS
AF 610 without connectors Webbing width:
45 mm
AF 610 with two connectors AZ 002
Work positioning belts and devices
10
19
POLE CLIMBERS AND TREE CLIMBING SPIKES
11
Pole climbers and tree climbing spikes Pole climbers
11 - 2
Spare parts for pole climbers
11 - 7
Tree climbing spikes
11 - 8
Spare parts for tree climbing spikes
11 - 11
11
SP 101, SP 102
Pole climbers for wooden poles D-20 and D-30
PN-E-55000
The construction of pole climbers complies with the guidelines PGE-2017
SP 101
POLE CLIMBERS AND TREE CLIMBING SPIKES
11
SP 102 PARAMETERS
Manufacture:
frame - powder-coated steel straps - waterproof coated fabric
REF. NO.
2
11
Pole climbers and tree climbing spikes
PAIR WEIGHT
SP 101
for wooden poles D-20
3,0 kg
SP 102
for wooden poles D-30
3,2 kg
WWW.PROTEKT.COM.PL
SP 103
Pole climbers for wooden poles type D with adjustment
PN-E-55000
The construction of pole climbers complies with the guidelines PGE-2017
SP 030 REPLACEABLE SPIKE
POLE CLIMBERS AND TREE CLIMBING SPIKES
11
PARAMETERS
Manufacture:
Pole climbers for wooden poles type D with variable adjustment are suitable for use on wooden poles sized 130–300mm. The device is fitted with replaceable hardened steel spikes.
frame - powder-coated steel straps - waterproof coated fabric
REF. NO.
PAIR WEIGHT
SP 103
6,30 kg
Pole climbers and tree climbing spikes
11
3
SP 203, SP 204, SP 205
Pole climbers for reinforced-concrete poles B10, B20 and B40
PN-E-55000
The construction of pole climbers complies with the guidelines PGE-2017
SP 011 REPLACEABLE ROLLER SP 012 REPLACEABLE ROLLER
POLE CLIMBERS AND TREE CLIMBING SPIKES
11
PARAMETERS
Manufacture:
frame - powder-coated steel straps - waterproof coated fabric rollers - rubber
REF. NO.
PAIR WEIGHT DIMENSION A
SP 203
for reinforced-concrete poles B10
5,0 kg
max. 185 mm
SP 204
for reinforced-concrete poles B20
5,1 kg
max. 225 mm
SP 205
for reinforced-concrete poles B40
5,2 kg
max 257 mm
4
11
Pole climbers and tree climbing spikes
WWW.PROTEKT.COM.PL
SP 401
Pole climbers for spun poles
PN-E-55000
The construction of pole climbers complies with the guidelines PGE-2017 PARAMETERS
frame - powder-coated steel straps - waterproof coated fabric rollers - rubber
Manufacture:
Pole climbers type B0r-340/220 for spun poles, 220–340mm dia. Suitable for pole types: E10,5/2,5; E10,5/4,3; E10,5/10; E10,5/12; E12/2,5; E12/4,3; E13,5/2,5; E13,5/4,3; E15/2,5; E15/4,3 and adequate EPV poles.
SP 402
REF. NO.
PAIR WEIGHT
SP 401
7,60 kg
Pole climbers for spun poles
PN-E-55000
POLE CLIMBERS AND TREE CLIMBING SPIKES
11
The construction of pole climbers complies with the guidelines PGE-2017 PARAMETERS
Manufacture:
frame - powder-coated steel straps - waterproof coated fabric rollers - rubber
Pole climbers type B0r-400/280 for spun poles, 280-400mm dia. Suitable for pole types: E12/10; E12/12; E13,5/10; E13,5/12; E15/10; E15/12 and adequate EPV poles.
6
11
Pole climbers and tree climbing spikes
REF. NO.
PAIR WEIGHT
SP 402
8,00 kg
WWW.PROTEKT.COM.PL
Spare parts for pole climbers SP 203 SP 204 SP 205
SP 401 SP 402
SP011
•
•
SP012
•
REF. NO.
SP 101 SP 102
SP 103
SP 011 Roller, small 1 pce
SP 012 Roller, large 1 pce
11
SP 021 •
•
•
• POLE CLIMBERS AND TREE CLIMBING SPIKES
Strap for pole climbers SP021 1 pce
SP 030 Spike, long 2 pcs
SP030
•
Pole climbers and tree climbing spikes
11
7
DR 1
Steel climbing spikes
DR 2
Steel climbing spikes
CALF PADDING
POLE CLIMBERS AND TREE CLIMBING SPIKES
11 REPLACEABLE SPIKE
Steel climbing spikes with soft calf padding. Comes with two replaceable heat-hardened steel spikes (short and long).
Steel climbing spikes with adjustable soft calf padding height and replaceable heat-hardened steel spike.
PARAMETERS
PARAMETERS
Manufacture:
frame - powder-coated steel straps - waterproof coated fabric padding - leather and felt
Manufacture:
frame - powder-coated steel straps - waterproof coated fabric padding - leather and felt
REF. NO.:
PAIR WEIGHT
REF. NO.:
PAIR WEIGHT
SP 501
3,75 kg
SP 505
3,80 kg
8
11
Pole climbers and tree climbing spikes
WWW.PROTEKT.COM.PL
DR 2A
Aluminium climbing spike
DR 3
Steel climbing spikes
CALF PADDING CALF PADDING
11 REPLACEABLE SPIKE
Aluminium climbing spikes with adjustable calf padding height. Comes with two replaceable heat-hardened steel spikes (short and long).
Steel climbing spikes with adjustable calf padding height (additionally the padding is fitted with leg stabilising plate) and replaceable heat-hardened steel spike.
PARAMETERS
PARAMETERS
Manufacture:
frame - aluminium straps - waterproof coated fabric padding - leather and felt
Manufacture:
REF. NO.:
PAIR WEIGHT
REF. NO.:
PAIR WEIGHT
SP 502
2,56 kg
SP 506
3,85 kg
POLE CLIMBERS AND TREE CLIMBING SPIKES
REPLACEABLE SPIKE
frame - powder-coated steel straps - waterproof coated fabric padding - leather and felt
Pole climbers and tree climbing spikes
11
9
DR 3A
Aluminium climbing spike
DR 4
Steel climbing spikes
POLE CLIMBERS AND TREE CLIMBING SPIKES
11
Aluminium climbing spikes with adjustable calf padding height, additionally the padding is fitted with leg stabilising plate, pivotally connected to bow element. Comes with two replaceable heat-hardened steel spikes (short and long).
Steel climbing spikes with soft calf padding. Comes with two replaceable heat-hardened steel spikes (short and long).
PARAMETERS
PARAMETERS
Manufacture:
frame -aluminium straps - waterproof coated fabric padding - leather and felt
Manufacture:
REF. NO.:
PAIR WEIGHT
REF. NO.:
PAIR WEIGHT
SP 503
2,76 kg
SP 504
4,80 kg
10
11
Pole climbers and tree climbing spikes
frame - powder-coated steel straps - waterproof coated fabric padding - leather and felt
WWW.PROTEKT.COM.PL
Spare parts for tree climbing spikes REF. NO.:
DR 2
•
SP052
•
•
•
•
•
•
SP054
•
•
•
•
SP060
•
•
•
•
•
•
SP061
•
•
•
•
•
•
SP062
•
•
•
•
•
•
SP063
•
•
•
•
•
•
SP064
•
•
•
•
•
•
Spike, long - kit
SP 060 Lower strap assembly
SP 061 Strap, long
SP 062 Lower mounting strap, long
SP 063 Lower mounting strap, short
SP 064 Attachment ring
SP 065
11 SP065
Spike covers
SP 070
•
•
•
SP070
Stiffened calf padding
SP 071
SP071
•
•
•
SP072
•
•
•
Padding, left
SP 072 Padding, right
SP 073 Padding reinforcement
SP 080 Sleeve
DR 4
SP053
Spike, short - kit
SP 054
DR 3A
•
Spike, long - kit
SP 053
DR 3
SP051
Spike, short - kit
SP 052
DR 2A
SP073
SP080
•
•
•
•
•
•
•
•
•
•
•
•
•
Pole climbers and tree climbing spikes
POLE CLIMBERS AND TREE CLIMBING SPIKES
SP 051
DR 1
11
11
AX 023
Bag for climbing spikes
PARAMETERS Dimensions: Material:
470 x 320 x 160 mm reinforced PVC
REF. NO.:
AX 023
POLE CLIMBERS AND TREE CLIMBING SPIKES
11
12
11
Pole climbers and tree climbing spikes
WWW.PROTEKT.COM.PL
Anchor points and devices Anchor points
12 - 2
Anchor devices
12 - 30
Horizontal anchor lanyards and lines
12 - 53
Webbing slings and portable anchor points
12 - 61
Anchor systems and devices
12 - 68
12
PROTON 1
Anchor point
EN795 TYPE A
Ref. no.: PROTON 1
Mounting kit with retaining plate HL 705 / Post retaining plate
PARAMETERS
Material:
hot-dip galvanized steel
Plate base dimensions:
23 x 23 cm
Mounting hole spacing:
140 - 180 mm
REF. NO.:
HL 705
HL 910 / Mounting kit Anchor post PROTON 1 can be installed on roofs, terraces, platforms and beams. It is fitted with a three-hole plate enabling connection of personal fall protection equipment. The device complies with EN 795 type A.
ANCHOR POINTS AND DEVICES
12
Comes with 4x mechanical anchors. PARAMETERS
Height variant: Material: Maximum strength
20 cm, 30 cm, 40 cm hot-dip galvanized steel 28 kN
PARAMETERS Materiał:
stainless steel
SPECIAL FEATURES
Protection for up to 3 people.
REF. NO.:
LENGTH
QUANTITY
HEIGHT
HL 910 125
125 mm
kit 4 pcs
PROTON 1 200
200 mm
HL 910 250
250 mm
kit 4 pcs
PROTON 1 300
300 mm
HL 910 500
500 mm
kit 4 pcs
PROTON 1 400
400 mm
HL 910 1000
1000 mm
kit 4 pcs
REF. NO.:
2
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Example installation of post PROTON 1 PROTON 1 installed using retaining plate and mounting kit (HL 705 + HL 910).
DIMENSIONS
HL 910 mounting kit
14
10
89
12 140 190 230
ANCHOR POINTS AND DEVICES
190
140
230
HL 705 post retaining plate
HL 910 mounting kit
HL 705 post retaining plate
Anchor points and devices
12
3
PROTON 2
Anchor point
EN795 TYPE A
Ref. no.: PROTON 2
Mounting kit with retaining plate HL 702 / Two sizes of post retaining plates
PROTON 2 anchor post
KIT B
KIT A
HL 702 post retaining plates
PARAMETERS
Material:
HL 910 mounting kit
12
HL 910 / Mounting kit - 4 pcs kit
Anchor post PROTON 2 can be installed on roofs, terraces, platforms and beams. It is fitted with a three-hole plate enabling connection of personal fall protection equipment. The device complies with EN 795 type A. PARAMETERS
ANCHOR POINTS AND DEVICES
hot-dip galvanized steel
PARAMETERS
Height variants:
50 cm, 80 cm, 110 cm, 140 cm
Material:
hot-dip galvanized steel
Maximum strength:
28 kN
Material:
REF. NO.:
SPECIAL FEATURES
Protection for up to 3 people.
4
12 Anchor points and devices
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
stainless steel
HEIGHT
PROTON 2 500
500 mm
PROTON 2 800
800 mm
PROTON 2 1100
1100 mm
PROTON 2 1400
1400 mm
WWW.PROTEKT.COM.PL
Example installation of post PROTON 2 PROTON 2 installed using retaining plate and mounting kit (HL 702 + HL 910).
DIMENSIONS
ROOF AREA ROOF COVER
STEEL ROOF STRUCTURE
HL 702 post retaining plates
SET B post retaining plates
HL 910 mounting kit
SET A post retaining plates
H
HL 910 mounting kit
500 800 1100
HL 702 post retaining plates
1400
He
Hb min
300
Hb max
W max
Hb max using mounting kit HL910
300
300
300
300
300
300
300
600
600
600
600
300
120
300
300
300
600
600
600
600
300
300
300
300
600
600
600
600
ANCHOR POINTS AND DEVICES
12
H - post height He - post height above roof steel structure Hb - roof steel structure height W - HL 910 mounting defined length R - roofing thickness F - recommended post height above roof surface
Anchor points and devices
12
5
PROTON 4
Anchor point
EN795 TYPE A
Ref. no.: PROTON 4
Example installation of post PROTON 4 PROTON 4 installed using screws to trapezoidal sheeting.
INSTALLATION
Proton 4A post base
Proton 4
Proton 4 is an anchor device complying with EN 795 type A. It is and anchor point for personal fall protection equipment. Proton 4 is intended for mounting directly to trapezoidal steel sheet roofing, if the sheet is an outer cover, and also if covered with an insulation material. With various configurations of the post the product can be used for a wide range of metal sheets.
Proton 4A post base
12
ANCHOR POINTS AND DEVICES
PARAMETERS
Proton 4
Height variants:
43 cm
Material:
stainless steel AISI 304
Minimum strength:
14 kN
SPECIAL FEATURES
Protection for up to 3 people.
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
PROTON 4
6
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Dimensions and variants of post PROTON 4
430
DIMENSIONS
333 363
400 430
PROTON 4A
ANCHOR POINTS AND DEVICES
12
PROTON 4B
Anchor points and devices
12
7
PROTON 5
Anchor point
EN795 TYP A
nr kat.: PROTON 5
Mounting kit with retaining plate HL 705 / Post retaining plate
PARAMETERS
Material:
hot-dip galvanized steel
Plate base dimensions:
23 x 23 cm
Mounting hole spacing::
140 - 180 mm
NR KAT.:
HL 705
Anchor post PROTON 5 can be installed on roofs, terraces, platforms and beams. It is equipped with a rotary plate with three holes enabling connection of personal fall protection equipment.
HL 910 / Mounting kit
Comes with 4x mechanical anchors.
PARAMETERS
12
Height variants:
50 cm, 80 cm, 110 cm, 140 cm
Material:
hot-dip galvanized steel
Maximum strength:
28 kN
ANCHOR POINTS AND DEVICES
PARAMETERS SPECIAL FEATURES Material:
Protection for up to 3 people. REF. NO.:
stainless steel
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS HEIGHT
REF. NO.:
HEIGHT
QUANTITY
PROTON 5 500
500 mm
HL 910 125
125 mm
4 pcs kit
PROTON 5 800
800 mm
HL 910 250
250 mm
4 pcs kit
PROTON 5 1100
1100 mm
HL 910 500
500 mm
4 pcs kit
PROTON 5 1500
1500 mm
HL 910 1000
1000 mm
4 pcs kit
8
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Example installation of post PROTON 5 PROTON 5 installed using retaining plate and mounting kit (HL 705 + HL 910).
INSTALLATION
DIMENSIONS
76,10
14
10
88,90
140 190
HL 705 POST RETAINING PLATE
230
12
ANCHOR POINTS AND DEVICES
190
140
230
35
HL 910 MOUNTING KIT
HL 910 MOUNTING KIT
HL 705 POST RETAINING PLATE
Anchor points and devices
12
9
Anchor point
EN795 TYPE B
Ref. no.: PROTON 6
ALUMINIUM POST
Adjustable clamp HEB 100-300mm complete assembly
STRUCTURAL ELEMENT
DIMENSIONS
Minimum working height: 1750 mm
PROTON 6
Minimum working height:
Proton 6 is an anchor point for individual fall protection equipment. Proton 6 can be installed on HEB I-beams, 100mm to 300mm wide. The device is made of a strengthened aluminium alloy and stainless steel.
12
Two Proton 6 devices can be used as an anchor point for horizontal webbing AE 320.
Minimum working height:
min. 1,75 m
Material:
aluminium
Weight:
~15 kg
Maximum strength:
28 kN
100 - 300 mm
SPECIAL FEATURES
Protection for up to 3 people. REF. NO.: PROTON 6 (post + clamp kit)
10
12 Anchor points and devices
10 -36 mm
ANCHOR POINTS AND DEVICES
PARAMETERS
WWW.PROTEKT.COM.PL
Example installation of post PROTON 6 PROTON 6 mounted on HEB beam INSTALLATION
12
ANCHOR POINTS AND DEVICES
EXAMPLE USE Proton 6 as an anchor point for horizontal anchor lanyard AE 320
Anchor points for horizontal anchor lanyard AE 320
Anchor points and devices
12
11
AT 150
Anchor point type A
EN795 TYPE A
Ref. no.: AT 150
Kit AT 150 001
AT 150
installation on concrete AT 150 + stainless steel segment anchors M12/25/45
INSTALLATION
Anchor point is an anchor device mounted on a permanent structure.
26
100
Ø 12
80
SPECIAL FEATURES 64
Protection of 1 PERSON PARAMETERS
THE KIT COMPRISES Material:
aluminium
Dimensions:
135 x 64 x 62 mm
Weight:
0,31 kg
Static strength:
min. 12 kN
12
1 x AT 150
ANCHOR POINTS AND DEVICES
PS 150 Rubber pad PS 150 for anchor AT 150 to be used on uneven and porous concrete surfaces. PARAMETERS
Material:
EPDM rubber
Dimensions:
62 x 135 x 2,8 mm
Weight:
19 g
12
12 Anchor points and devices
2 x M12/25/45
WWW.PROTEKT.COM.PL
Kit AT 150 002
Kit AT 150 003
AT 150 + galvanized steel segment anchors M12/25/45
AT 150 + screws M12x40 + washer M12 + self-locking nut M12
installation on concrete
installation on steel profile
INSTALLATION
INSTALLATION
26
26
100
100
Ø 12
80
64 min 6
64
THE KIT COMPRISES
1 x AT 150
1 x AT 150
2 x M12/25/45
2 x M12x40
12
ANCHOR POINTS AND DEVICES
THE KIT COMPRISES
Anchor points and devices
12
13
AT 151
Anchor point
EN 795 TYPE A
Ref. no.: AT 151
LOAD DIRECTION
INSTALLATION
F
F
F
F F
F SELF-LOCKING NUT M12 - A2 DIN985 WASHER 13MM-A2 SCREW M12-A2 DIN
12
ANCHOR POINTS AND DEVICES
PARAMETERS
Anchor point AT 151 for concrete is intended for anchoring personal fall protection equipment. The anchor can be installed on steel or concrete structural slabs.
Weight:
2,25 kg
Material:
stainless steel
Dimensions:
300 x 296 x 98 mm
Static strength:
min. 12 kN
SPECIAL FEATURES
Protection of 1 PERSON
14
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AT 152
Anchor point
EN 795 TYPE A
Ref. no.: AT 152
INSTALLATION
LOAD DIRECTION
12
Anchor point AT 152 for concrete is intended for anchoring personal fall protection equipment. The anchor can be installed also in “green” concrete during its casting or using chemical anchors.
Weight:
0,35 kg
Material:
hot-dip galvanized steel
Dimensions:
173 x 60 x 20 mm
Static strength:
min. 12 kN
ANCHOR POINTS AND DEVICES
PARAMETERS
SPECIAL FEATURES
Protection of 1 PERSON
Anchor points and devices
12
15
AT 153
Anchor point type A
EN795 TYPE A
Ref. no.: AT 153
AT 153
Kit AT 153 001
installation on concrete AT 153 + stainless steel segment anchors M12/25/45 INSTALLATION
DIMENSIONS 89,7
25
135
100
º
R
10
R8
70
90
140
2x
Ø1
60
4
R 50
8 Ø
THE KIT COMPRISES
58
12
1 x AT 150
Anchor point is an anchor device mounted on a permanent structure.
ANCHOR POINTS AND DEVICES
PARAMETERS
Dimensions:
140x135x58 mm
Sheet thickness:
8 mm
Material:
stainless steel AISI 304
Weight:
1,1 kg (without anchors/screws)
Breaking strength:
min. 32 kN
2 x M12/25/45
SPECIAL FEATURES
Protection of 1 PERSON
16
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Kit AT 153 002
Kit AT 153 003
AT 153 + screws M12x40 + washers + self-locking nuts M12
AT 153 + screws M12x40 + stainless steel segment anchors M12/25/45.
installation on steel profile
installation on concrete
INSTALLATION
INSTALLATION Kit of increased strength!
Kit of increased strength!
Breaking force min. 32 kN
THE KIT COMPRISES
1 x AT 150
Breaking force min. 32 kN
THE KIT COMPRISES
1 x AT 150
12
1 x AT153A
ANCHOR POINTS AND DEVICES
2 x M12x40 2 x M12x40 4 x M12/25/45
Anchor points and devices
12
17
AT 180
Anchor point type A
EN795 TYPE A
Ref. no.: AT 180
Kit AT 181 001
AT 180
installation on concrete AT 180 + stainless steel segment anchor INSTALLATION 100
M12
Ø12
4
DIMENSIONS max. 30 7,5
Ø 22
95
3Ø
3,5
4
Ø
12
,5
23,7
32
º 1
ANCHOR POINTS AND DEVICES
THE KIT COMPRISES
º
12
º
50
44
135
Anchor point is an anchor device mounted on a permanent structure.
1 x AT 180
PARAMETERS Dimensions:
56 x 48 x 35 mm
Material:
stainless steel AISI 304
Weight:
65 g
Breaking strength:
min. 12 kN
Mounting hole:
ø 12,5
1 x M12/25/45
SPECIAL FEATURES
Protection of 1 PERSON
18
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Kit AT 181 002
Kit AT 181 003
AT 180 + galvanized steel segment anchor
AT 180 + screw M12x40 + washer M12 + self-locking nut M12
installation on steel profile
installation on concrete
INSTALLATION 100
min 3
max. 30 7,5
THE KIT COMPRISES
1 x AT 180
1 x AT 180
1 x M12/25/45
1 x M12x40
12
ANCHOR POINTS AND DEVICES
THE KIT COMPRISES
M12
M12
Ø13
min 3
Ø12
4
INSTALLATION
Anchor points and devices
12
19
AT 181
Anchor point type A
EN795 TYPE A
Ref. no.: AT 181
Kit AT 181 001
AT 181
installation on concrete AT 181 + stainless steel segment anchor INSTALLATION 100
M10
Ø10
4
DIMENSIONS 7,5 max. 30
Ø 22
95
3Ø
3,5
4
Ø
10
,5
º 23,7
32
THE KIT COMPRISES 135
º
50
1
44
º
12
Anchor point is an anchor device mounted on a permanent structure.
1 x AT 181
ANCHOR POINTS AND DEVICES
PARAMETERS
Dimensions:
56 x 48 x 35 mm
Material:
stainless steel AISI 304
Weight:
65 g
Breaking strength:
min. 12 kN
Mounting hole:
ø 10,5
1 x M12/25/45
SPECIAL FEATURES
Protection of 1 PERSON
20
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Kit AT 181 002
Kit AT 181 003
AT 181 + galvanized steel segment anchor
AT 181 + screw M12x40 + washer M12 + self-locking nut M12
installation on steel profile
installation on concrete
INSTALLATION 100
4
M10 min 3
7,5 max. 30
THE KIT COMPRISES
THE KIT COMPRISES
1 x AT 181
1 x AT 181
1 x M12/25/45
1 x M12x40
12
ANCHOR POINTS AND DEVICES
M10
Ø10
Ø11
4
INSTALLATION
Anchor points and devices
12
21
AT 182-01
Anchor point type A
EN795 TYPE A
Ref. no.: AT 182-01
INSTALLATION ON TRAPEZOIDAL SHEET
mi
n.
0,6
min. 330 - max. 466
min. 365 - max. 500,5
DIMENSIONS
INSTALLATION ON PERMANENT STRUCTURE
454
12
Anchor point is an anchor device mounted on a permanent structure.
ANCHOR POINTS AND DEVICES
PARAMETERS
Material:
stainless steel AISI 304
Weight::
4,5 kg
Breaking strength:
min. 12 kN
Mounting hole:
ø 12,5
EXAMPLE USE Retractable type fall arrester
SPECIAL FEATURES
Protection of 1 PERSON REF. NO.: AT 182-01
22
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AT 182-02
Anchor point type A
EN 795 TYPE A
Ref. no.: AT 182-02
INSTALLATION ON TRAPEZOIDAL SHEET
AT180
mi
n.
0,6
DIMENSIONS INSTALLATION ON PERMANENT STRUCTURE
308
min. 365 - max. 500,5
12 min. 330 - max. 466,5
ANCHOR POINTS AND DEVICES
EXAMPLE USE
Roof ladder
Anchor point is an anchor device mounted on a permanent structure.
SPECIAL FEATURES
Protection of 1 PERSON
REF. NO.: AT 182-02
Anchor points and devices
12
23
AT 183
Anchor point type A
EN795 TYPE A
Ref. no.: AT 183
AT 183
Kit AT 183 001
installation on concrete AT 183 + stainless steel segment anchor INSTALLATION
80
Ø1 Ø 12
8 max. 67,3 M12
DIMENSIONS 18
53
50
48
67
THE KIT COMPRISES
Ø 13
Ø 8,5
67,3
12
Anchor point is an anchor device mounted on a permanent structure.
1 x AT 183
ANCHOR POINTS AND DEVICES
PARAMETERS Material:
stainless steel AISI 304
Breaking strength:
min. 12 kN
Mounting hole:
ø 13
SPECIAL FEATURES
1 x M12/25/45
Protection of 1 PERSON REF. NO.:
REF. NO.:
AT 183
AT 183 01
24
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Kit AT 183 002
Kit AT 183 003
AT 183 + galvanized steel segment anchor
AT 183 + screw M12x40 + washer M12 + self-locking nut M12
installation on steel profile
installation on concrete
INSTALLATION
INSTALLATION 50
80
Ø1 8
42
Ø 12
Ø 12
Ø
M12
max. 67,3 min. 3
THE KIT COMPRISES
1 x AT 183
1 x AT 183
1 x M12/25/45
1 x M12x40
REF. NO.:
REF. NO.:
AT 183 002
AT 183 003
12
ANCHOR POINTS AND DEVICES
THE KIT COMPRISES
max. 67,3
Anchor points and devices
12
25
AT 192
Anchor point for steep roofs
EN795 TYPE A2
Ref. no.: AT 192
Kit AT 192 XXX 001
AT 192
assembly on wooden structures AT 192 + galvanized steel wood screw INSTALLATION
Connecting lanyard AT 192 is a component of personal fall protection equipment. The lanyard should be used as a permanent anchor device type A, enabling connection of connecting and absorbing device to a structural anchor point. Connecting lanyard is formed by a stainless steel cable, 5mm dia. Device length from 0.35 to 5.0m. Fitted with a galvanized steel handle. PARAMETERS
12
1 x AT 192
Material:
stainless steel + galvanized steel
Breaking strength:
min. 12 kN
SPECIAL FEATURES
Protection of 1 PERSON
ANCHOR POINTS AND DEVICES
THE KIT COMPRISES
REF. NO.:
2x AT 192 LENGTH
AT 192 035
350 mm
AT 192 100
1000 mm
AT 192 035 001
350 mm
AT 192 200
2000 mm
AT 192 100 001
1000 mm
AT 192 300
3000 mm
AT 192 200 001
2000 mm
AT 192 400
4000 mm
AT 192 300 001
3000 mm
AT 192 500
5000 mm
AT 192 400 001
4000 mm
AT 192 500 001
5000 mm
AT 192 xxx - any length from 0.35 to 5.0m as ordered
26
12 Anchor points and devices
REF. NO.:
AT 192 LENGTH
WWW.PROTEKT.COM.PL
Kit AT 192 XXX 002
Kit AT 192 XXX 003
AT 192 + screw M12x40-70 A2 + washer M12 + self-locking nut M12
AT 192 + galvanized steel segment anchor
installation on steel profile
assembly on wooden structures
INSTALLATION
INSTALLATION
THE KIT COMPRISES
THE KIT COMPRISES
1 x AT 192
1 x AT 192
12
REF. NO.:
AT 192 LENGTH
REF. NO.:
ANCHOR POINTS AND DEVICES
2 x M12x40
2 x M12x40-70 A2
AT 192 LENGTH
AT 192 035 002
350 mm
AT 192 035 003
350 mm
AT 192 100 002
1000 mm
AT 192 100 003
1000 mm
AT 192 200 002
2000 mm
AT 192 200 003
2000 mm
AT 192 300 002
3000 mm
AT 192 300 003
3000 mm
AT 192 400 002
4000 mm
AT 192 400 003
4000 mm
AT 192 500 002
5000 mm
AT 192 500 003
5000 mm
Anchor points and devices
12
27
m
180 mm
43 mm
200 mm
Ø
34 m
Ø 16 mm
m 34 m Ø
63 mm
220 mm
83 mm
240 mm
Ø
34 m
m 34 m Ø
103 mm
Ø 16 mm
Ref. no.: AT 020 m
EN 795 TYPE B
Ø 16 mm
Anchor point
Ø 16 mm
AT 020
INSTALLATION 1
Anchor point AT 020 is intended for anchoring personal fall protection equipment. The anchor is intended for installation on vertical, horizontal or inclined surfaces, in a specially prepared bore hole.
Push the device as shown Lock plate F F F
2
Put anchor point in bore hole
Ø = od 21mm do 24mm
ANCHOR POINTS AND DEVICES
12
3
PARAMETERS
Make sure that lock plate disables the anchor point removal
Material:
galvanized steel, stainless steel, aluminium
Weight:
~ 0,66 kg
Static strength:
no less than 12 kN
SPECIAL FEATURES
Protection of 1 PERSON
Lock plate
28
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AT 021
Anchor point for concrete
EN 795 TYPE B
Ref. no.: AT 021
PRODUCT PRESENTATION protekt.co/at021
INSTALLATION
1
Squeeze the device in direction as shown F F F
2
Anchor AT021 is an easy-to-mount temporary anchor point for permanent structures, intended for protection of 1 user, installed on concrete of class min. B20. The anchor AT021 can be used for installation on vertical, horizontal or inclined surfaces.
Put anchor point in bore hole
12
3
Static strength:
no less than 12 kN
Surface strength:
min. concrete B20
Weight:
280 g
Material:
zinc-anodized galvanized steel stainless steel, aluminium
ANCHOR POINTS AND DEVICES
Ø = 20 mm
PARAMETERS
Make sure that stones are locked in the hole by pulling the device in direction shown by arrow “X”.
SPECIAL FEATURES X
Protection of 1 PERSON
Anchor points and devices
12
29
AZ 200
Pipe anchor
EN 362
Ref. no.: AZ 200
DIMENSIONS
ANCHOR POINTS AND DEVICES
12
PARAMETERS
Dimension
DEVICE VERSION AZ 200 01
AZ 200 02
AZ 200 03 140
Material:
stainless steel + copper
A
81
112
Weight:
min. 12 kN
B
85
105
125
C
128
175
208
SPECIAL FEATURES
Formed by a single stainless steel rod, 6mm dia. Pipe anchor is a component of fall protection equipment, and is intended to connect connecting and absorbing device (e.g. energy absorber with lanyard, retractable type fall arrester, guided type fall arrester work rope) to a structural anchor point.
Protection of 1 PERSON
REF. NO.:
AZ 200 01 CLEARANCE 81 MM
346 mm
AZ 200 02 CLEARANCE 112 MM
373 mm
AZ 200 03 CLEARANCE 140 MM
415 mm
30
12 Anchor points and devices
Maximum opening of the pipe anchor when placing on a profile cannot be greater than dimension A for a given model, as provided in the table.
WWW.PROTEKT.COM.PL
AZ 300
Anchor device
EN 795 TYPE B
Ref. no.: AZ 300
 PRODUCT PRESENTATION protekt.co/az300
DIMENSIONS MOVABLE PRESS JAW
112
,6 ABS COVER
23
SWIVEL SHACKLE
3, 2
12
28
Anchor device AZ 300 is intended for use by one person; to be used as a protection against falls from a height when working on scaffolds. To be used on tubes, 44.5 - 50mm dia.
ANCHOR POINTS AND DEVICES
20
PARAMETERS
Opening:
52 mm
Breaking strength:
min. 12 kN
Material:
stainless steel, ABS
Weight:
880 g
SPECIAL FEATURES
Protection of 1 PERSON
REF. NO.:
AZ 300
Anchor points and devices
12
31
AT 060
Anchor beam
EN 795 TYPE B
Ref. no.: AT 060
INSTALLATION
1
Place anchor beam inside opening in the ground or on sill.
3
Bring adjustment plate close to the opposite side surface on the hole. Push adjusting plate firmly by tightening adjustment screw to the hole side surface.
room where work takes place Hole width 360 to 1240mm
2
ANCHOR POINTS AND DEVICES
12
Make sure that beam is horizontal and if it fits tightly to the wall. Then bring mounting plate close to the hole side surface.
bring plate close and tighten adjustment screw
bring the plate close
Anchor beam AT 060 is a component of fall protection equipment and can be used as a portable anchor device. The beam can be used in building openings (windows and doors), 350 to 1240mm wide. It is fitted with two fixing plates.
PARAMETERS
Material:
zinc-anodized steel
Dimensions:
1415 x 150 x 100 mm
Weight:
6,9 kg
Static strength:
min. 13 kN
SPECIAL FEATURES
Protection for up to 2 users.
32
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AT 061
Aluminium anchor beam + bag
EN 795 TYPE B
Ref. no.: AT 061
INSTALLATION
1
Place anchor beam inside opening in the ground or on sill.
3
Bring adjustment plate close to the opposite side surface on the hole. Push adjusting plate firmly by tightening adjustment screw to the hole side surface.
room where work takes place Hole width 300 to 1270mm
2
Make sure that beam is horizontal and if it fits tightly to the wall. Then bring mounting plate close to the hole side surface.
bring plate close and tighten adjustment screw
12
ANCHOR POINTS AND DEVICES
bring the plate close
PARAMETERS Light aluminium alloy anchor beam AT 061 is a component of fall protection equipment and can be used as a portable anchor device. The beam can be used in building openings (windows and doors), 300 to 1270mm wide. It is fitted with two fixing plates.
Material:
aluminium
Dimensions:
1422 x 122 x 100 mm
Weight:
3,2 kg
Static strength:
min. 12 kN
SPECIAL FEATURES
Protection of 1 PERSON
Anchor points and devices
12
33
AT 062
Aluminium anchor beam
EN 795 TYPE B
Ref. no.: AT 062
INSTALLATION Place anchor beam inside opening in the ground or on sill. If the beam is horizontal and fits the wall firmly, bring mounting plate close to the hole side surface. Bring adjustment plate close to opposite side surface on the hole and push adjustment plate firmly by tightening adjustment screw to the hole side surface.
ANCHOR POINTS AND DEVICES
12 Light aluminium alloy anchor beam AT 062 with a stabilising clamp is a component of fall protection equipment and can be used as a portable anchor device. The beam can be used in building openings (windows and doors), 300 to 1270mm wide. It is fitted with two fixing plates. Beam AT 062 must be used with personal fall protection equipment.
PARAMETERS
Material:
aluminium
Weight:
6,7 kg
Dimensions:
1455 x 300 x 200 mm
Static strength:
min. 12 kN
SPECIAL FEATURES
Protection of 1 PERSON
34
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AT 063
Anchor for trapezoidal corrugated sheet
EN 795 TYPE B
Ref. no.: AT 063
INSTALLATION
Correct
Incorrect
The anchor is suitable for most sheet profiles available on the market.
ANCHOR POINTS AND DEVICES
12
PARAMETERS
Material:
powder coated steel
Dimensions:
495 x 500 x 100 mm
Weight:
~3,70 kg
Static strength:
>12 kN
Breaking strength:
>12 kN
SPECIAL FEATURES
Protection of 1 PERSON
Anchor points and devices
12
35
AT 250
Anchor device
EN 795 TYPE B
Ref. no.: AT 250
DIMENSIONS
(400 mm) 320 mm
100 mm
25 mm
ANCHOR POINTS AND DEVICES
12
Anchor device AT 250 is a portable anchor point, suitable for use with an I-beam rail. The rail must be fixed to a permanent structure.
PARAMETERS
Minimum opening:
25 mm
Maximum opening:
320 mm
Material:
aluminium
Dimensions:
440 x 100 x 45 mm
Weight:
1,37 kg
SPECIAL FEATURES
Protection of 1 PERSON
36
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AT 251
Anchor device
EN 795 TYPE B
Ref. no.: AT 251
INSTALLATION
DIMENSIONS
PARAMETERS
SPECIAL FEATURES
Materiał:
aluminium, stainless steel, galvanized steel
Dimensions when folded:
150 x 805 x 150 mm
Weight:
8 kg
Minimum breaking strength:
15 kN
Number of users:
max. 3
Protection for up to 3 people.
Anchor points and devices
12
37
ANCHOR POINTS AND DEVICES
12
ST 010
Anchor device
EN 795 TYPE B
Ref. no.: AT 100
PRODUCT PRESENTATION protekt.co/st010
DIMENSIONS MIN. 60
9
MIN. 60
Ø 74 177
Ø 54
40º
MAX. 60
MAX. 120
81
12
15 71
137
MAXIMUM SPAN
MINIMUM SPAN
ANCHOR POINTS AND DEVICES
PARAMETERS
Weight:
5,2 kg
Material:
painted galvanized steel
SPECIAL FEATURES
Anchor trolley ST 010 is designed as a portable anchor (attachment) point. It must be used with fall protection equipment. The trolley moves (drives) along a horizontal I-beam (rail). The rail must be fixed to a permanent structure. Anchor trolley ST 010 can be used with rails, 65mm to 120mm wide. The trolley provides protection for one person only.
38
12 Anchor points and devices
Protection of 1 PERSON
WWW.PROTEKT.COM.PL
ST 020
Anchor device
EN 795 TYPE B
Ref. no.: AT 120

PRODUCT PRESENTATION protekt.co/st020
DIMENSIONS MAX. 210
76
152
152
207,4
199,3
MIN. 60
MIN. 60
MIN. 75
298
298
12
96,6
MAXIMUM SPAN
MINIMUM SPAN
Weight:
4 kg
Material:
painted galvanized steel
ANCHOR POINTS AND DEVICES
PARAMETERS
SPECIAL FEATURES
Anchor device ST 020 is a portable anchor point (as a protection for one person) suitable for use with an I-beam rail. The rail must be fixed to a permanent structure. Anchor device ST 020 can be used with rails, 75mm to 210mm wide.
Protection of 1 PERSON
Anchor points and devices
12
39
ST 030
Anchor device
EN 795 TYPE B
Ref. no.: AT 130
197 mm
DIMENSIONS
230 mm
714 mm
10 - 36 mm
INSTALLATION
10 0 - 3 0
0 mm
HEB I-beam
tightening locking mechanism
12
ANCHOR POINTS AND DEVICES
PARAMETERS
6 anchor points
Material:
zinc-anodized steel
Dimensions:
72 x 20 x 23 cm
Weight:
~16,5kg
Maximum number of users:
Max. 6 users
SPECIAL FEATURES Anchor device ST 030 is an element of personal fall protection equipment. The device is a portable anchor point for fall protection equipment. The device can be mounted on HEB I-beams with flange 100 to 300mm wide and 10 to 36mm thick. The device provides protection for up to 6 users at a time. It is made of zinc-anodized and powder-coated steel.
40
12 Anchor points and devices
Protection of up 6 PERSONS
WWW.PROTEKT.COM.PL
AT 190
Connecting lanyard without connectors
EN795 TYPE B
Ref. no.: AT 190
INSTALLATION
Connecting lanyard AT 190 is a component of fall protection equipment, intended for connection of connecting and absorbing device to a structural anchor point. Connecting lanyard is formed by a stainless steel cable, 5mm dia, and has flexible loops of various diameters at both ends enabling for looping without using any additional connectors. The cable is weather-resistant.
DIMENSIONS
PARAMETERS
Material:
stainless steel + copper
Weight:
min. 12 kN
SPECIAL FEATURES
Ø5
0
12
Ø5
REF. NO.:
ANCHOR POINTS AND DEVICES
Protection of 1 PERSON LENGTH
AT 190 060
60 cm
AT 190 100
100 cm
AT 190 200
200 cm
AT 190 300
300 cm
AT 190 500
500 cm
AT 190 1000
1000 cm
Ø2
5
AT 190 XX - ANY LENGTH UP TO 10M AS ORDERED
Anchor points and devices
12
41
AT 191
Connecting lanyard without connectors
EN 795 TYPE B
Ref. no.: AT 191

INSTALLATION
PRODUCT PRESENTATION protekt.co/at191
Connecting lanyard AT 191 is a component of personal fall protection equipment. The anchor point should be used as a portable temporary anchor device type B, enabling connection of connecting and absorbing device to a structural anchor point. Connecting lanyard is formed by stainless steel cable, 8mm dia and 0.6 to 10m long, fitted with loops of various diameters at both ends, enabling for looping without using any additional connectors.
DIMENSIONS
PARAMETERS
12
Material:
stainless steel + copper
Weight:
min. 12kN
ANCHOR POINTS AND DEVICES
SPECIAL FEATURES
Protection of 1 PERSON REF. NO.:
LENGTH
AT 191 060
60 cm
AT 191 100
100 cm
AT 191 200
200 cm
AT 191 300
300 cm
AT 191 500
500 cm
AT 191 1000
1000 cm
AT 191 XX - ANY LENGTH UP TO 10 M ACCORDING TO THE ORDER
42
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AC 340
Anchor device
EN 795 TYPE A
Ref. no.: AC 340
INSTALLATION
CORRECT
PRODUCT PRESENTATION protekt.co/ac340
DIMENSIONS INCORRECT
a = 30-100 mm b = 30 -100 mm c = max. 12 mm
a = 30-100 mm b = 30 -100 mm c = max. 12 mm
d = 30 Ø - 90 mm Ø
12 a = 30-100 mm b = 30 -100 mm c = max. 12 mm
PARAMETERS
Material:
stainless steel
Dimensions:
208 x 97 x 75 (min.) - 140 (max.) mm
Weight:
2,50 kg
Mounting range:
75-140 mm
SPECIAL FEATURES
Protection of 1 PERSON
Anchor points and devices
12
43
ANCHOR POINTS AND DEVICES
Anchor device AC 340 is a portable anchor point (as a protection for one person) suitable for use with I-beams as shown above. They can be used also on tubes, 90mm dia max.
a = 30-100 mm b = 30 -100 mm c = max. 12 mm
HL 104
Anchor point
EN795 TYPE A
Ref. no.: HL 104
Kit HL 104 001
installation on concrete HL 104 + stainless steel segment anchor INSTALLATION
DIMENSIONS
THE KIT COMPRISES
1 x HL 104
12 Anchor point HL 104 can be mounted on concrete structure or on steel profiles.
ANCHOR POINTS AND DEVICES
PARAMETERS Dimensions:
70 x 166 x 39 mm
Material:
stainless steel AISI 304
Breaking strength:
min. 12 kN
SPECIAL FEATURES
2 x M12/25/45
Protection of 1 PERSON REF. NO.:
REF. NO.:
HL 104 001
HL 104
44
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Kit HL 104 002
Kit HL 104 003
HL 104 + galvanized steel segment anchor
HL 104 + screw M12x40-A2-70
installation on concrete
installation on steel profile
INSTALLATION
INSTALLATION
THE KIT COMPRISES
THE KIT COMPRISES
1 x HL 104
2 x M12/25/45
2 x M12x40-A2-70
REF. NO.:
REF. NO.:
HL 104 002
HL 104 03
12
ANCHOR POINTS AND DEVICES
1 x HL 104
Anchor points and devices
12
45
HL 105
Anchor point for steep roofs
EN795 TYPE A
Ref. no.: HL 105
Kit HL 105 001
installation on concrete HL 105 + stainless steel segment anchor
INSTALLATION
100 130
THE KIT COMPRISES
15
10
130
DIMENSIONS
17
5
100 130
66,5
8,5
1 x HL 105
41
12
Anchor point HL 105 can be mounted on concrete structure or on steel profiles.
ANCHOR POINTS AND DEVICES
PARAMETERS
Dimensions:
130 x 130 x 17 - 66,5 mm
Material:
powder-coated steel - RAL 1023
Breaking strength:
min. 12 kN
SPECIAL FEATURE
4 x M12/25/45
Protection of 1 PERSON REF. NO.:
REF. NO.:
HL 105
HL 105 001
46
12 Anchor points and devices
WWW.PROTEKT.COM.PL
IMPROVED Kit HL 105 002
Kit HL 105 003
HL 105 + galvanized steel segment anchor
HL 105 + screw M12x40-A2-70
installation on concrete
installation on steel profile
INSTALLATION
INSTALLATION
THE KIT COMPRISES
THE KIT COMPRISES
1 x HL 105
1 x HL 105
4 x M12/25/45
4 x M12x40-A2-70
REF. NO.:
REF. NO.:
HL 105 002
HL 105 003
ANCHOR POINTS AND DEVICES
12
Anchor points and devices
12
47
AT 401
Under-tile roof anchor point
EN 795 TYPE A2
Ref. no.: AT 401
10 kN
DIMENSIONS Can be mounted on structures by mechanical, chemical anchors or bolts. Possibility of mounting on wooden structures.
PARAMETERS
ANCHOR POINTS AND DEVICES
12
Material:
stainless steel
Dimensions:
418 x 194,8 mm
Weight:
0,54 kg
Sheet thickness:
5 mm
Static strength:
min. 10 kN
SPECIAL FEATURES
Protection of 1 PERSON
48
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AT 402
Under-tile roof anchor point with hook
EN 795 TYPE A2
Ref. no.: AT 402
2 kN
10 kN
DIMENSIONS
Can be mounted on structures by mechanical, chemical anchors or bolts. Possibility of mounting on wooden structures.
PARAMETERS
stainless steel
Dimensions:
418 x 194,8 mm
Weight:
0,54 kg
Sheet thickness:
5 mm
Static strength:
min. 10 kN
Permissible dead load:
2 kN
12
ANCHOR POINTS AND DEVICES
Material:
SPECIAL FEATURES
Protection of 1 PERSON
Anchor points and devices
12
49
AT 403
Anchor device
EN795:2012 TYPE A
Ref. no.: AT 403
DIMENSIONS
EXPLANATORY FIGURE
77
552,5
20,5
283
ANCHOR POINTS AND DEVICES
12
Anchor point is an anchor point intended for use with personal fall protection equipment. It is intended for use by one user working on an inclined roof. The device design enables its mounting to rafters on a roof ridge. The point comprises two plates connected by a movable eye hinge. On the plates, there are 36 bores in total for screws or nails. The point complies with EN 795:2012 type A (approved by CIOP (Central Institute for Labour Protection)), however is not subject to the above standard..
PARAMETERS
Weight:
1,5 kg
Material:
zinc-anodized steel
Dimensions:
553 x 82 x 100 mm
Static strength:
min. 12 kN
Minimum wooden beam dimensions:
100 x 100 mm
Minimum anchoring depth:
80 mm
SPECIAL FEATURES
Protection of 1 PERSON
50
12 Anchor points and devices
WWW.PROTEKT.COM.PL
IMPROVED
KIT AT 403 001
KIT AT 403 002
AT 403 + 36 x wood screws diameter min. 4mm type: KDH/KMH4 0070 4,0x70 PZ-2 - SREW - MET Philips screwdriver head
AT 403 + 36x ring shanks, 4mm dia type: GCOC-40080 - SREW - MET
Required installation using min. 32x screws.
Required installation using min. 28x shanks.
INSTALLATION
INSTALLATION
THE KIT COMPRISES
THE KIT COMPRISES
12
36 x minimum 32 x
1 x AT 403
36 x minimum 28 x
Anchor points and devices
ANCHOR POINTS AND DEVICES
1 x AT 403
12
51
AT 252
Anchor beam for concrete wells
EN 795 TYPE B
Ref. no.: AT 252
2
4 3
1
RUP 502-T rescue lifting device with steel cable, 20 or 25m long Working load: max. 500kg *to be ordered separately
1
2
Additional anchor point
3
Cable-locking pin
4
Beam has 9 holes for span adjustment
Beam-locking pin
INSTALLATION
1
3
2
12
ANCHOR POINTS AND DEVICES
PARAMETERS Anchor device AT 250 is a portable anchor point, suitable for use with an I-beam rail. The rail must be fixed to a permanent structure.
Material:
powder coated steel
Dimensions when folded:
115 x 55 x 65 cm
Weight:
~24 kg (without rescue lifting device)
SPECIAL FEATURES
Protection of 1 PERSON
52
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Horizontal lifeline
EN 795
Ref. no.: LP 120
Adjustable horizontal lifeline. Fitted with loops with thimble at both ends. Line length adjuster (tensioner) is made of stainless steel. To be used for works requiring frequent mobility in the horizontal. In order to connect horizontal lifeline LP 120 to full body harness, use an energy absorber with lanyard only.
PARAMETERS
Material:
polyamide
Manufacture:
twisted rope
Diameter:
14 mm
DEVICE VERSION
LENGTH
LP 120 10
10,0 m
LP 120 20
20,0 m
Anchor points and devices
12
ANCHOR POINTS AND DEVICES
LP 120
12
53
NEW
AZ 640
Webbing sling
EN 795:2012 TYPE B
Ref. no.: AZ 640
EXAMPLE USE The AZ640 webbing sling is an anchoring device designed to create a point on the construction site ensuring the connection of a safety harness (connection and shock-absorbing system) in the place of risk of falling.
ANCHOR POINTS AND DEVICES
12
The webbing sling is designed to be installed in the middle of a reinforced concrete structure (reinforced concrete) in order to create a point for fastening safety harnesses and permanent horizontal safety systems. The webbing sling is intended for use by only one employee. The device has been tested and positively certified in accordance with EN 795: 2012 (Fall protection from height, Anchor devices, Requirements and tests, TYPE B). The webbing sling can be used with a self-locking device, in accordance with the EN 360 standard. PARAMETERS
Webbing:
polyester, width 45 mm, thickness 2,5 mm
Termination:
polyethylene
Buckle:
galvanized steel
SPECIAL FEATURES Protection of 1 PERSON
54
12 Anchor points and devices
REF. NO.:
LENGTH
AZ 640 05
0,5 m
AZ 640 10
1,0 m
AZ 640 15
1,5 m
AZ 640 20
2,0 m
WWW.PROTEKT.COM.PL
AE 100
Column anchoring point
EN 795:2012 TYPE B
Ref. no.: AE 100 washer with clamp buckle
tensing mechanism
securing washer corner
working tape
CARRIER BAG
DEVICE COVER FOR RETRACTABLE TYPE FALL ARRESTER AE 100-002-000
DEVICE VERSIONS
AE 100 is a new column anchoring point intended for simultaneous connecting of 3 persons. AE 100 can be installed on reinforced concrete, steel posts and skylight constructions. The set consists of: working tape with maximum length of 50 m with tensing mechanism 4 washers to secure the construction 3 washers with clamp buckles type transport bag
LENGTH
AE 100 03
3,0 m
AE 100 05
5,0 m
AE 100 10
PARAMETERS
Material:
galvanized steel tapes: polyester
10,0 m
Available lengths:
3 m, 5m, 10 m, 20 m, 30 m, 40,m 50 m
AE 100 20
20,0 m
Tape width:
35 mm
AE 100 30
30,0 m
Number of users:
3
AE 100 40
40,0 m
EN 795:2012 type B / CE
AE 100 50
50,0 m
In accordance with the standard
AE 100 -001-000
12
SPECIAL FEATURES
AE 100 -002-000
Protection for up to 3 people.
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Anchor points and devices
12
55
ANCHOR POINTS AND DEVICES
CORNER WASHER AE 100-001-000
AE 320
Safety horizontal webbing
EN 795
Ref. no.: AE 320
ASSEMBLY
Horizontal webbing can be attached to a structural anchor point directly or by a loop using the integrated connector, or by connecting lanyard. Minimum loads at both webbing sides: 24 kN for one user, 27 kN for 2 user and 29 kN for 3 users.
F
F F
STRUCTURAL ANCHOR POINT
F
F
INSTALLATION ON STRUCTURAL ANCHOR POINT BY LOOP USING INTEGRATED CONNECTOR
F F
F F F
F
F F
F F
12
The device AE 320 complies with EN 795 type B (portable anchor points). The device AE 320 is intended for protection of 3 users at a time.
INSTALLATION BY CONNECTING LANYARD
PARAMETERS
L
D
F
F
L L
ANCHOR POINTS AND DEVICES
Adjustable horizontal lifeline (horizontal fall protection line). The device is delivered with two steel connectors AZ 060 and cargo bag. To be used for works requiring frequent mobility in the horizontal.
D D
F F
Z Z Liczba u¿ytkowników
Liczba u¿ytkowLiczba ników u¿ytkowników 1 1 2 2 3 3
5m
F F
Z
7m
L
10 m
15 m
20 m
F [kN]
D [m]
F [kN]
D [m]
F [kN]
D [m]
F [kN]
D [m]
F [kN]
1
0,65
24,00
0,91
24,00
1,30
24,00
1,94
24,00
2,59
24,00
2
0,68
27,00
0,96
27,00
1,37
27,00
2,05
27,00
2,73
27,00
3
0,72
29,00
1,00
29,00
1,43
29,00
2,15
29,00
2,86
29,00
1m 1m
L L 10 m 10 m
15 m 20 m L[m] -55 mmtotal length of77 mmrelaxed webbing AE 320 15 m 20 m D [m] F [kN] F [kN] D [m] F [kN] F [kN] D [m] D [m] F [kN] D[m]*webbing AE fallingDD [m] D [m] 320 deflection F [kN] F [kN] D [m] during [m] F [kN] F [kN] D [m] D [m] F [kN] 1,94 0,91 24,00 2,59 24,00 24,00 24,00 24,00 1,30 0,65 Z[m] - maximum elongation of 1,30 connecting and1,94absorbing device + user 0,91 24,00 2,59 24,00 24,00 24,00 24,00 0,65 2,05 0,96 27,00 2,73 27,00 27,00 27,00 27,00 1,37 0,68 height = 5.5m 2,05 0,96 27,00 2,73 27,00 27,00 27,00 27,00 1,37 0,68
56
29,00 29,00
1,00 1,00
29,00 29,00
1,43 1,43
webbing - polyester webbing tensioner/length adjuster - steel protected against corrosion by galvanization
SPECIAL FEATURES
1m
D [m]
0,72 0,72
Material:
29,00 29,00
2,15 2,15
29,00 29,00
2,86 2,86
CLR[m] - required distance = D+Z+1m
12 Anchor points and devices
29,00 29,00
Protection for up to 3 people. DEVICE VERSIONS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
LENGTH
WEIGHT
AE 320 10
10,0 m
4,00 kg
AE 320 20
20,0 m
5,20 kg
WWW.PROTEKT.COM.PL
AE 321
Adjustable horizontal anchor rope
EN795:2012/B CEN/TS 16415:2013/B
ref. no.: AE321 XX
intermediate points
Protection for 1 to a maximum of 3 people.
The anchoring tape can be attached to a fixed construction point directly, or by means of looping with a snap lock, possibly with a lanyard. Minimal loads both sides of the tape: 12 kN for one person, 14.5kN for 3 people. As intermediate points you can use snap-locks that meet the load requirements of 14.5 kN.
SPECIAL FEATURES
Protection for up to 3 people.
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
PARAMETERS
Maximum number users:
3 persons
Maximal length:
30 m, 20m, 10m
Minimal length:
2,5 m
Material:
tape - polyester belt tensioner / regulator - galvanized steel zabezpieczona przed korozjÄ…
Horizontal anchoring rope (horizontal safety rope) with adjustable length. A transport bag is enclosed in the set with the device. The device is used to provide protection during works that require frequent movement in a horizontal plane. The AE 321 rope meets the requirements of EN 795: 2012 type B (portable anchoring points for equipment) and CEN/TS 16415:2013/B. The AE 321 device is intended for simultaneous protection of 1 to 3 people. It can work with the set EN 345/355 and EN 353-2, EN 360. As intermediate points you can use snap-locks that meet the load requirements of 14.5 kN.
VERSIONS OF THE DEVICE
12
ANCHOR POINTS AND DEVICES
ASSEMBLY
LENGTH
AE 321 10
10 m
AE 321 20
20 m
AE 321 30
30 m
Anchor points and devices
12
57
12
LP 100 LL
Horizontal lifeline
EN 795
Ref. no.:
Kernmantle polyamide horizontal lifeline, 10.5mm dia, fitted with thimbles at both endings. To be used for works requiring frequent mobility in the horizontal.
PARAMETERS
ANCHOR POINTS AND DEVICES
LP 100 LL
DEVICE VERSIONS
Material:
polyamide
Manufacture:
kernmantle rope
Diameter:
10,5 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
58
12 Anchor points and devices
LENGTH
LP 100 LL
2,5 m
LP 100 LL
5,0 m
LP 100 LL
8,0 m
LP 100 LL
10 m
LP 100 LL
15 m
LP 100 LL
20 m
LP 100 LL
25 m
LP 100 LL
30 m
WWW.PROTEKT.COM.PL
AE 300
Horizontal lifeline
EN 795
Ref. no.: AE 300
 PRODUCT PRESENTATION protekt.co/ae300
PARAMETERS
Material:
polyamide
Manufacture:
twisted rope
Diameter:
16 mm
DEVICE VERSIONS
LENGTH
WEIGHT
AE 300 10
10,0 m
3,70 kg
AE 300 20
20,0 m
5,15 kg
Anchor points and devices
12
ANCHOR POINTS AND DEVICES
Adjustable horizontal lifeline (horizontal fall protection line). Fitted with loops with thimble at both endings. Line length adjuster (tensioner) is made of galvanized steel. To be used for works requiring frequent mobility in the horizontal. Horizontal lifeline AE 300 complies with EN 795 (portable anchor points for fall protection equipment). In order to connect horizontal anchor line AE 300 to full body harness, use an energy absorber with lanyard only. Line tensioning wrench included.
12
59
LP 100 LT
Horizontal lifeline
EN 795
Ref. no.:
LP 100 LT
1
HORIZONTAL LINE WITHOUT CONNECTORS
PARAMETERS Material:
polyamide
LP 100 LT
Manufacture:
kernmantle rope
Ref. no.: LP 100 LT
Diameter:
10,5 mm
2,5 m
15 m
Horizontal lifeline ended with loop and thimble. WITHOUT CONNECTORS
5,0 m
20 m
8,0 m
25 m
10 m
30 m
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
DEVICE STANDARD CONFIGURATIONS WITH FACTORY-FITTED CONNECTOR
1
1
LP 100 LT + AZ 002
12
Ref. no.:LP 100 LT + AZ 002
2,5 m 5,0 m 8,0 m 10 m
Horizontal lifeline ended with loop and thimble. Factory-fitted steel connector: •
ANCHOR POINTS AND DEVICES
NEW CONNECTOR AZ 029
AZ 002 (opening 18mm)
15 m
Ref. no.: LP 100 LT + AZ 003
2,5 m 5,0 m
Ref. no.: LP 100 LT + AZ 029
8,0 m
Horizontal lifeline ended with loop and thimble.
20 m
Factory-fitted steel connector:
25 m
•
30 m
LP 100 LT + AZ 003
LP 100 LT + AZ 029
AZ 029 (galvanized steel, plastic, opening 50mm)
10 m 15 m 20 m 25 m 30 m
2,5 m 5,0 m 8,0 m 10 m
Horizontal lifeline ended with loop and thimble. Factory-fitted steel connector: •
AZ 003 (opening 20mm)
15 m 20 m 25 m 30 m
60
12 Anchor points and devices
WWW.PROTEKT.COM.PL
LP 100 TT
Horizontal lifeline
EN 795
Ref. no.:
LP 100 TT
1
2
12
ANCHOR POINTS AND DEVICES
Horizontal lifeline ended with thimbles at both ends. To be used for works requiring frequent mobility in the horizontal.
PARAMETERS
Material:
polyamide
Manufacture:
kernmantle rope
Diameter:
10,5 mm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Anchor points and devices
12
61
HORIZONTAL LINE WITHOUT CONNECTORS
LP 100 TT Ref. no. LP 100 TT
2,5 m
15 m
Horizontal lifeline ended with thimbles at both ends.
5,0 m
20 m
WITHOUT CONNECTORS
8,0 m
25 m
10 m
30 m
STANDARD DEVICE CONFIGURATIONS WITH FACTORY-FITTED CONNECTOR
1
2
1
LP 100 TT + 2 x AZ 002 Ref. no. LP 100 LT + 2xAZ 002
2,5 m 5,0 m 8,0 m
NEW CONNECTOR AZ 029
2
LP 100 TT + 2 x AZ 003
2,5 m 5,0 m
Ref. no. P 100 TT + 2xAZ 003
10 m Horizontal lifeline ended with loop and thimble. Factory-fitted steel connectors:
15 m
•
25 m
AZ 002 (opening 18mm)
20 m
10 m Horizontal lifeline ended with thimbles at both ends. Factory-fitted aluminium connectors: • AZ 003 (opening 20mm)
30 m
LP 100 TT + 2 x AZ 029
12
Ref. no. LP 100 LT + 2xAZ 029
5,0 m 8,0 m
Ref. no. LP 100 TT + AZ 002 + AZ 029
ANCHOR POINTS AND DEVICES
15 m
•
25 m
AZ 029 (opening 50mm)
20 m
30 m
LP 100 TT + AZ 003 + AZ 029 Ref. no. LP 100 TT + AZ 003 + AZ 029
20 m 25 m
2,5 m 5,0 m 8,0 m 10 m
10 m Horizontal lifeline ended with thimbles at both ends. Factory-fitted steel connectors:
15 m
30 m
LP 100 TT + AZ 002 + AZ 029
2,5 m
8,0 m
Horizontal lifeline ended with thimbles at both ends. Factory-fitted steel connectors: • •
AZ 029 (opening 50mm) AZ 002 (opening 18mm)
15 m 20 m 25 m 30 m
2,5 m 5,0 m 8,0 m 10 m
Horizontal lifeline ended with thimbles at both ends. Factory-fitted steel connectors: • •
62
AZ 029 (opening 50mm) AZ 002 (opening 18mm)
12 Anchor points and devices
15 m 20 m 25 m 30 m
WWW.PROTEKT.COM.PL
LP 200 FLR
Horizontal lifeline, flame-resistant
EN 795, EN 358 P.4.1.5
Ref. no.:
1
LP 200 FLR
2
DEVICE STANDARD CONFIGURATIONS
2
Ref. no. LP200FLR/AZ002 Horizontal lifeline with adjuster LP 200 FLR with connector AZ 002 (galvanized steel, opening 18mm)
Ref. no. LP200FLR/AZ003 Horizontal lifeline with adjuster LP 200 FLR with connector AZ 003 (aluminium, opening 20mm)
Ref. no. LP200FLR/AZ002/AZ029 Horizontal lifeline with adjuster LP 200 FLR with connector AZ 029 (galvanized steel, opening 50mm)
Ref. no. LP200FLR/AZ002/AZ011 Horizontal lifeline with adjuster LP 200 FLR with connectors AZ 002 (galvanized steel, opening 18mm) AZ 011 (galvanized steel, opening 18mm)
Ref. no.LP200FLR/AZ029/AZ011 Horizontal lifeline with adjuster LP 200 FLR with connector AZ 029 (galvanized steel, opening 50mm) AZ 011 (galvanized steel, opening 18mm) Ref. no.LP200FLR/2AZ003 Horizontal lifeline with adjuster LP 200 FLR with connector 2 x AZ 003 (aluminium, opening 20mm)
PARAMETERS Ref. no.LP200FLR/AZ029/AZ003 Material:
polyamide
Manufacture:
aramid kernmantle lanyard
Diameter:
11,2 mm
Horizontal lifeline with adjuster LP 200 FLR with connector AZ 029 (galvanized steel, opening 50mm) AZ 003 (aluminium, opening 20mm) Ref. no.LP200FLR/2AZ029
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS RESISTANCE TO FLAME IN ACCORDENCE WITH EN 358 P.4.1.5 STANDARD
Horizontal lifeline with adjuster LP 200 FLR with connector 2 x AZ 029 (galvanized steel, opening 50mm)
Ref. no. LB200FLR Horizontal lifeline with adjuster LP 200 FLR WITHOUT CONNECTORS
5m 10 m 20 m
5m 10 m 20 m
5m 10 m 20 m 5m 10 m 20 m
5m 10 m 20 m
12
5m 10 m 20 m
5m
ANCHOR POINTS AND DEVICES
1
10 m 20 m
5m 10 m 20 m
5m 10 m 20 m
Anchor points and devices
12
63
AZ 700
Webbing sling
EN 795 TYPE B
Ref. no.:
AZ 700
PRODUCT PRESENTATION
Webbing sling AZ 700 is formed by polyamide webbing 45mm wide. Inner side of the sling has non-slip rubber protective coating. It is suitable for protection of 3 users at a time with device AE 320.
protekt.co/az700
PARAMETERS Material:
polyester, rubber, galvanized steel
Webbing width:
45 mm
Static strength:
30 kN
DEVICE VERSIONS
SPECIAL FEATURES
Protection of 1 PERSON
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
LENGTH
AZ 700 090
90 cm
AZ 700 140
140 cm
AZ 700 200
200 cm
AZ 410
Connecting lanyard
EN 354, EN 795 TYP B
Ref. no.:
AZ 410, AZ 430
PRODUCT PRESENTATION
ANCHOR POINTS AND DEVICES
12
Connecting lanyard AZ 410 is a component of fall protection equipment. When combined with an energy absorber (e.g. ABM) forms a connecting and absorbing device. Connecting lanyard is a portable anchor point complying with EN 795/B. Connecting lanyard AZ 430 is a portable anchor point complying with EN 795/B. It is suitable for protection of 3 users at a time with device AE 320. Material: galvanized steel cable, 6.3mm dia, fitted with loops with thimbles at both endings. The middle part of the lanyard is protected by a transparent plastic tube.
protekt.co/az410
PARAMETERS DEVICE VERSIONS
Material:
steel
Manufacture:
kernmantle rope
Diameter:
6,3 mm
SPECIAL FEATURES
Protection of 1 PERSON
64
12 Anchor points and devices
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
LENGTH
AZ 410
1,0 m
AZ 410
2,0 m
AZ 430
3,0 m
AZ 430
5,0 m
AZ 430
10,0 m
WWW.PROTEKT.COM.PL
AZ 900
Webbing sling
EN 354, EN 566, EN 795 TYPE B
Ref. no.:
AZ 900
length = 200 cm
length = 150 cm
length = 120 cm length = 80 cm
length = 60 cm
length = 30 cm
Webbing sling AZ 900 is: 1. a component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354, 2. a component of fall protection equipment, intended for connection of connecting and absorbing device to a structural anchor point.
length 20 - 200cm
12
ANCHOR POINTS AND DEVICES
9 cm
PARAMETERS LENGTH
Material: Webbing width: Length:
textile webbing 20 mm 30 cm ÷ 200 cm
30 cm 60 cm 80 cm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
120 cm 150 cm 200 cm
Anchor points and devices
12
65
AZ 900
Webbing sling
EN 354, EN 566, EN 795 TYPE B
Ref. no.:
AZ 900
length = 200 cm
length = 150 cm
length = 120 cm
length = 80 cm
length = 60 cm
length = 30 cm
12
Webbing sling AZ 900 is: component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354, a component of fall protection equipment, designed to connect connecting and absorbing device to a structural anchor point.
ANCHOR POINTS AND DEVICES
PARAMETERS
Material:
webbing - textile webbing sleeve - polyester
Webbing width:
20 mm
Protective sleeve width:
35 mm
Length:
30 cm ÷ 200 cm
LENGTH 30 cm 60 cm 80 cm 120 cm
SPECIAL FEATURES
150 cm 200 cm
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
66
12 Anchor points and devices
WWW.PROTEKT.COM.PL
AZ 920
Webbing sling
EN 354, EN 566, EN 795 TYPE B
Ref. no.:
AZ 920
AZ 920 200 - length = 200 cm AZ 920 150 - length = 150 cm AZ 920 120 - length = 120 cm AZ 920 080 - length = 80 cm AZ 920 060 - length = 60 cm AZ 920 030 - length = 30 cm AZ 920 020 - length = 20 cm
length 20 - 200cm
PARAMETERS
Material:
textile webbing
Webbing width:
20 mm
Length:
20 cm ÷ 2 m
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Webbing sling AZ 920 is: 1. a component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354, 2. a component of fall protection equipment, intended for connection of connecting and absorbing device to a structural anchor point. LENGTH
LENGTH
20 cm
120 cm
30 cm
150 cm
60 cm
200 cm
80 cm
Anchor points and devices
12
67
ANCHOR POINTS AND DEVICES
12
AZ 930
Webbing sling
EN 354, EN 566, EN 795 TYPE B
Ref. no.:
AZ 930
AZ 930 200 - length = 200 cm AZ 930 150 - length = 150 cm AZ 930 120 - length = 120 cm AZ 930 080 - dł. = 80 cm AZ 930 060 - length = 60 cm AZ 930 030 - length = 30 cm AZ 930 020 - length = 20 cm
ANCHOR POINTS AND DEVICES
12
Webbing sling AZ 930 is: 1. a component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354, 2. a component of fall protection equipment, intended for connection of connecting and absorbing device to a structural anchor point.
length 20 - 200cm
PARAMETERS LENGTH Material:
textile webbing
Webbing width:
20 mm
Length:
20 cm ÷ 2 m
30 cm 60 cm 80 cm
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
68
12 Anchor points and devices
120 cm 150 cm 200 cm
WWW.PROTEKT.COM.PL
TU 701
Prusik
EN 795
Ref. no.:
TU 701
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Ø 12 mm polyester
PARAMETERS
Material:
polyester
Rope diameter:
Ø 12 mm
Lengths:
80 cm, 85 cm, 90 cm, 100 cm
LENGTH
80 cm KLK 100
85 cm 90 cm 100 cm
TU 810
Prusik
EN 795 TYPE B
Ref. no.:
TU 810
PARAMETERS
Ø 10 mm
Material:
aramid, polyester
Rope diameter:
Ø 10 mm
Lengths:
80 cm, 85 cm, 90 cm, 100 cm
12
aramid, polyester
SPECIAL FEATURES
ANCHOR POINTS AND DEVICES
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
LENGTH
80 cm 85 cm 90 cm 100 cm
Anchor points and devices
12
69
TU 811
Prusik
EN 795
Ref. no.:
TU 811
SPECIAL FEATURES PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
PARAMETERS Ø 10 mm aramid, polyester
Material:
aramid, polyester
Rope diameter:
Ø 10 mm
Lengths:
80 cm, 85 cm, 90 cm, 100 cm
LENGTH
80 cm 85 cm
KLK 200
90 cm 100 cm
TU 812 EN 795 TYPE B
Prusik Ref. no.:
TU 812
PARAMETERS
Ø 10 mm aramid, polyester
12
Material:
aramid, polyester
Rope diameter:
Ø 10 mm
Lengths:
80 cm, 85 cm, 90 cm, 100 cm
SPECIAL FEATURES
ANCHOR POINTS AND DEVICES
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
LENGTH
80 cm 85 cm 90 cm 100 cm
70
12 Anchor points and devices
WWW.PROTEKT.COM.PL
RJ 200
Davit
EN 795:2012 TYPE B
Ref. no.:
RJ 200 DIMENSIONS
PRODUCT PRESENTATION protekt.co/rj200
CR240/10m retractable type fall arrester, to be ordered separately
ROTARY ARM
SEAT
BASE
AUXILIARY LINE for lowering of retractable type fall arrester connector
SPECIAL FEATURES
Protection of 1 PERSON
12 USE: • •
construction works on steel structures, works on façades based on steel structures, works at a height.
PARAMETERS
Material:
powder coated steel
Weight:
Base - 500,0kg +/- 20,0kg Seat - 76,4kg Rotary arm - 65,0kg Concrete weight - 1000,0kg +/- 20,0kg
Temperature range:
-30°C / +50°C
Static strength:
no less than 12 kN (complies with EN 795:2012 TYPE B)
Anchor points and devices
12
71
ANCHOR POINTS AND DEVICES
Device RJ 200 is designed for safe work when loading and unloading of vehicles and levellers. Anchor point for retractable type fall arrester is at 6.25m and enables operation at 5.00m from the “zero” level and within a 3.50m radius from the device arm rotation. For operation with RJ 200 device it is recommended to use retractable type fall arrester CR240/10m by PROTEKT. Retractable type fall arrester is installed on rotary arm. User attaches connector of retractable type fall arrester to full body harness (e.g. P30 by PROTEKT). The RJ200 device complies with EN 795:2012 for type B devices.
EXAMPLE USE use no. 1
360°
BALLAST min. 3000 kg
use no. 2 360°
12
CONCRETE WEIGHT RJ200.10 AT 1,000KG
ATTENTION! Use at least 3 weights
ANCHOR POINTS AND DEVICES
min. 3
DEVICE VERSIONS
RJ 200 RJ 200 10 - weight (1 pce) CR 240 - 10 m OS 010 - cover for CR 240
72
12 Anchor points and devices
WWW.PROTEKT.COM.PL
EN 795:2012 TYPE B
RJ 200 for embedding
RJ 200 for mounting on steel
use no. 3
use no. 4
Seat is embedded in a concrete structure, and arm can be mounted in seats.
Device RJ 200 can be used as an anchor point for mounting on steel structures using special side seat and retaining plate and screws or threaded rods M16. Seat with retaining plate forms a “clamp” around steel structure without interfering with its framework.
in concrete elements
ATTENTION!!! Minimum depth for embedding the seat in concrete is 1.0m..
structures
DIMENSIONS
DIMENSIONS
USE: • construction works on steel structures, works on façades based on steel structures, • works at a height.
PARAMETERS
PARAMETERS
Material:
powder coated steel
Weight:
Seat - 76,4kg Rotary arm - 65,0kg
Temperature range:
-30°C / +50°C
Static strength::
no less than 12 kN (complies with EN 795:2012 TYPE B)
Material:
powder coated steel
Weight:
Seat - 76,4kg Rotary arm - 65,0kg Side seat - 25,0kg Plate - 12,0kg
Temperature range:
-30°C / +50°C
Static strength:
no less than 12 kN (complies with EN 795:2012 TYPE B)
REF. NO.:
REF. NO.:
RJ 200
RJ 200
Anchor points and devices
12
12
ANCHOR POINTS AND DEVICES
USE: • construction works on construction site or boarding works, • works at a height.
73
RJ 200 for mounting on steel or concrete structures use no. 5
Device RJ 200 can be used as an anchor point for mounting on steel or concrete structures using special side seat and screws or threaded rods M16. It is required to prepare bore holes in the structure.
DIMENSIONS
Price list of components for RJ 200 RJ200.06.00
RJ200.05.00
12
USE: •
ANCHOR POINTS AND DEVICES
•
construction works on steel or reinforced-concrete structures, works on façades based on steel or reinforced-concrete structures, works at a height.
RJ200.11.02
RJ200.11.00
PARAMETERS
Material:
powder coated steel
Weight:
Seat - 76,4kg Rotary arm - 65,0kg Side seat - 25,0kg
Temperature range:
-30°C / +50°C
Static strength:
no less than 12 kN (complies with EN 795:2012 TYPE B)
REF. NO.:
RJ200.05.00 RJ200.06.00
REF. NO.:
RJ200.11.00
RJ 200
RJ200.11.02
74
12 Anchor points and devices
WWW.PROTEKT.COM.PL
RJ 500
Adjustable anchor rail
EN 795:2012 typ D CEN/TS 16415:2013
12
3 attachment points
anchor rail
DESCRIPTION inertia mass made of concrete
ANCHOR POINTS AND DEVICES
The RJ 500 adjustable anchor rail is a complete safety system against falls from a height. Excellent stability of the structure is ensured by inertia mass made of concrete blocks, thanks to which there is no need to make solid foundations or supporting structure. The RJ 500 is a modular device that can be combined to create any number of configurations and lengths according to the user’s needs. The standard length of the rail is 6 m, on which the trolleys are moving horizontally, constituting anchorage points for the persons to be secured. The rail is located at a height of 6.88 m. RJ 500 is a device which is perfect for, among others, servicing cisterns, railway sidings and repair stations and in systems where there is a need to move safely on planes at a height.
PARAMETERS
Material:
galvanized steel
Weight of concrete weights 4 pieces.
4100 kg
Construction weight:
1420 kg
The length of one segment rail:
6 mb
Max. number of users:
3
Anchor points and devices
12
75
4525 mm
6000 mm
2650 mm
5515 mm
6880 mm
7280 mm
2407 mm
2060 mm
2820 mm 1380 mm
ANCHOR POINTS AND DEVICES
12
76
12 Anchor points and devices
WWW.PROTEKT.COM.PL
DW 100
Deadweight trolley
EN 795 TYPE B
Ref. no.:
DW 100

DIMENSIONS 300
PRODUCT PRESENTATION
275
protekt.co/dw100 33,2
13 82
20
0
351
1470
ANCHOR POINTS
410
44
480
WEIGHTS mass of a weight: 18 kg
524
610
EXAMPLE USE
SPECIAL FEATURES
Dimensions:
1470 x 610 x 524 mm
Mass of the body:
28 kg
Total weight:
208 kg
Amount of weights:
10 pcs
Mass of a weight:
18 kg
Minimum upstand height:
60 cm
Material:
steel
Deadweight trolley DW 100 is a portable anchor point for any use where fall protection for one user or two users is required.
Protection of up 2 PERSONS
Anchor points and devices
12
77
ANCHOR POINTS AND DEVICES
12
PARAMETERS
DW 200
Anchor device
EN 795 TYPE B
Ref. no.:
DW 200 EXAMPLE USE
ANCHOR POINTS
PRODUCT PRESENTATION protekt.co/dw200
WEIGHTS mass of a weight: 25 kg
DIMENSIONS
2420 473 2420 473
2410
2486 2486
PARAMETERS
Dimensions:
2420 x 1766 x 2486 mm
Mass of the body:
48,5 kg
Total weight:
348,5 kg
Amount of weights:
12 pcs
Mass of a weight:
25 kg
Materiał:
powder coated steel
SPECIAL FEATURES
1715
1050
Protection of 1 PERSON
78
1715
1050
ANCHOR POINTS AND DEVICES
12
2410
Anchor device DW 200 with three anchor points is a perfect solution for use on flat roofs, where work outside roof edge is required. The device is fitted with wheels to enable moving the device quickly with no need to reload the weights. Wheel lock prevents uncontrolled motions of the device.
12 Anchor points and devices
WWW.PROTEKT.COM.PL
HL 709
Anchor kit
EN 795 TYPE B
Ref. no.:
HL 709
DIMENSIONS
anchor post HL 709
Posts HL 709 for cooperation with anchor device AE 320. The kit includes cargo bag AX 019 and fixing adapter.
12
POST PARAMETERS
Dimensions:
1100 mm x 300mm x 212mm
Weight:
14 kg
Material:
aluminium
ANCHOR POINTS AND DEVICES
EXAMPLE USE
ALUMINIUM VERSION::
STEEL VERSION: Dimensions:
1100 mm x 300mm x 212mm
Weight:
28 kg
Material:
hot-dip galvanized steel
SPECIAL FEATURES
Protection of up 2 PERSONS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Anchor points and devices
12
79
HL 710
Adapter for post HL 709 and HL 709DIEL installation Ref. no.:
HL 710
THE KIT COMPRISES
DIMENSIONS
2 x HL 709 anchor post
0
100
11
2 x AX 019 cargo bag
ANCHOR POINTS AND DEVICES
12
EXAMPLE USE
HL 710 USED FOR POST HL 709 INSTALLATION
HL 710 USED FOR POST HL 709DIEL INSTALLATION
1 x AE 320 anchor device
PARAMETERS REF. NO.:
Weight:
18,10 kg
2 aluminium posts HL 709 + 2 bags AX 019
Material:
powder coated steel
2 steel posts HL 709 + 2 bags AX 019
REF. NO.:
AE 320 20 - 10m long
HL 710 - 1 pce + bolts
80
12 Anchor points and devices
WWW.PROTEKT.COM.PL
DIEL
Dielectric post
EN 795 TYPE C
Ref. no.:
HL 709DIEL
DIMENSIONS
anchor post HL 709DIEL
Post HL 709DIEL is an ultimate support point for safety horizontal webbing AE320/10m. In combination with this webbing, it forms a temporary horizontal anchor system complying with EN 795:2012 for devices type C. The system is designed for works on transformers or other high-voltage devices. The post must be removed for discharge tests what considerably reduces the time for preparation of the device for the test. The kit is intended for 2 users working at a time.
ANCHOR POINTS AND DEVICES
12
POST PARAMETERS
Dimensions: 1362 x 275 x 220 mm Weight:
36,5 kg
Material:
post: glass and epoxy material EP GC 201 in accordance with PN EN 60893
SPECIAL FEATURES
Protection of up 2 PERSONS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
ANCHOR KIT IS SUBJECT TO INDIVIDUAL ESTIMATION
Anchor points and devices
12
81
EXAMPLE USE
Safety horizontal webbing AE 320
POST HL 709DIEL
POST HL 709DIEL
Connector for safety horizontal webbing AE 320 TENSIONER Webbing
THE KIT COMPRISES
ANCHOR POINTS AND DEVICES
12
2 x HL 709DIEL
82
12 Anchor points and devices
AE 320 anchor device, length 10m
WWW.PROTEKT.COM.PL
TEMP
Anchor system TEMP
EN 795 TYPE C
Ref. no.:
TEMP (HL730+AE320)
Kit TEMP 009
Kit TEMP 018
2 x HL 730 + AE 320 webbing 20.0m
3 x HL 730 + AE 320 webbing 20.0m
single-span configuration for 9m system
INSTALLATION
. min
4,5
m-
m
two-span configuration for 18m system
m 9,0 ax.
INSTALLATION
THE KIT COMPRISES
mi
,0 n. 9
m m-
ax.
1 8,
0m
THE KIT COMPRISES
2 x HL 730
3 x HL 730
1 x AE 320
1 x AE 320
REF. NO.:
REF. NO.:
TEMP 002 - 2x posts
TEMP 003 - 3x posts
AE 320 20 - 20m long
AE 320 20 - 20m long
ANCHOR POINTS AND DEVICES
12
Anchor points and devices
12
83
EXAMPLE USE The system can be expanded by adding more posts HL 730. Kit TEMP 009
single-span configuration for 9m system
Kit TEMP 018
two-span configuration for 18m system
SPECIAL FEATURES
Protection of up to 3 persons per strap The TEMP system is a vertical anchor system complying with EN 795:2012 for devices type C and document FprCEN/ TS16415. The system is designed for protection of works on a height on steel structures based on I-beams and other works on steel structures. The system is easy and quick to install and requires no special tools. The system can be expanded by more modules, each 18.0m long.
Elements for expansion of TEMP system DIMENSIONS POST HL 730 PARAMETERS
HL730
Dimensions:
1100 mm x 300mm x 212mm
Weight:
18,8 kg
Material:
zinc-anodized steel
HL 730
HL 730 - 1x post
AE 320 AE 320 20 - 20m long
84
12 Anchor points and devices
HL730
REF. NO.:
HL730
ANCHOR POINTS AND DEVICES
12
by more spans
300
WWW.PROTEKT.COM.PL
IM 100
Deadweight
EN 795 TYPE E
Ref. no.:
IM 100
Deadweight IM 100 is a portable anchor point for use on a flat roof of adequate load capacity. Comprises 12 elements (weights) and the main cross piece with anchor point. The IM 100 device should be placed so that it rests firmly on the roof surface.
PARAMETERS
Material: Total weight: Mass of a weight:
hot-dip galvanized steel, rubber
Dimensions:
2124 x 2124 mm
260 kg 18,5 kg
SPECIAL FEATURES REF. NO.:
Protection of 1 PERSON
IM 100
IM 200
Deadweight
EN 795 TYPE E
Ref. no.:
IM 200
Deadweight IM 200 is a portable anchor point for use on a flat roof of adequate load capacity. Comprises 12 elements (weights) and the main cross piece with mounted pole PROTON I (300mm). The IM 200 device should be placed so that it rests firmly on the roof surface.
12
ANCHOR POINTS AND DEVICES
PARAMETERS
hot-dip galvanized steel, rubber Material: 374 kg Total weight: Weight of a single weight: 25,5 kg
Dimensions:
3020,5 x 3020,5 x 400 mm
SPECIAL FEATURES
Protection of up 2 PERSONS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
REF. NO.:
IM 200
Anchor points and devices
12
85
ANCHOR POINTS AND DEVICES
12
86
12 Anchor points and devices
WWW.PROTEKT.COM.PL
Ladders, scaffolds and platforms Rope ladders
13 - 2
Telescopic ladders
13 - 14
Double-sided and combined ladders
13 - 18
Scaffolds
13 - 23
Mobile platforms
13 - 26
13
DL ROPE LADDERS
METHODS OF ATTACHING ROPE LADDERS 1
2
3
ROPE LADDERS OF THE SAME TYPE CAN BE COMBINED IN SERIES
LADDERS, SCAFFOLDS AND PLATFORMS
13
Ladder A
Join ultimate rung of a ladder to attachment loops of the other ladder by two connectors, 10cm (+/- 2cm) long. Each connector should be joined to the rung between retaining ring and rope fastener. Maximum length of an assembly comprising a number of joined ladders cannot be greater than 100m.
2
ladder joining connectors
Ladder B
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
DL 010
Wide rope ladder – polyester
PN-83/W-52501-CLAUSE 8
Ref. no.: DL 010
1 attachment loops fitted with thimbles
1
3
2
rung
310 mm
HOW TO USE? carrying rope
attachment loops fitted with thimbles
fasteners
retaining rings
2 fastener
Ladder conforms with PN-83/W-52501 - clause 8, Certificate No. Z/02/013/17, issued by the Institute of Mechanised Construction and Rock Mining in Warsaw.
PARAMETERS
Material: Manufacture: Weight:
rungs - aluminium rope - polyester Ø 8mm width - 310 mm rung spacing:- 310 mm 0.55kg - 1 r.m.
SPECIAL FEATURES
3
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
LADDERS, SCAFFOLDS AND PLATFORMS
310 mm
13
retaining rings
Ladders, scaffolds and platforms
13
3
DL 010C
Wide rope ladder – polyester
PN-83/W-52501-CLAUSE 8
Ref. no.: DL 010C
1
2
3
310 mm
1
attachment loops fitted with thimbles
2
fasteners
retaining rings
Ladder conforms with PN-83/W-52501 - clause 8, Certificate No. Z/02/013/17, issued by the Institute of Mechanised Construction and Rock Mining in Warsaw.
PARAMETERS
Material:
13 LADDERS, SCAFFOLDS AND PLATFORMS
Manufacture:
rungs - aluminium rope - polyester Ø 8mm width - 310 mm rung spacing: - 310 mm
Weight:
0.55kg - 1 r.m.
Colour:
black
310 mm
3
4
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
DL 011
Narrow rope ladder – steel
PN-83/W-52501-CLAUSE 8
Ref. no.: DL 011
1 1
3
2
fasteners
retaining rings
310 mm
attachment loops fitted with thimbles
Ladder conforms with PN-83/W-52501 - clause 8, Certificate No. Z/02/013/17, issued by the Institute of Mechanised Construction and Rock Mining in Warsaw.
2
PARAMETERS
Material: Manufacture: Waga:
rungs - aluminium cable - galvanized steel Ø 4mm width- 210 mm rung spacing: - 310 mm 0,3 kg - 1 r.m.
SPECIAL FEATURES
13 LADDERS, SCAFFOLDS AND PLATFORMS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS 210 mm
3
Ladders, scaffolds and platforms
13
5
DL 012
Wide rope ladder – steel
PN-83/W-52501-CLAUSE 8
Ref. no.: DL 012
1
1
2
310 mm
attachment loops fitted with thimbles
2
fasteners
3
retaining rings
Ladder conforms with PN-83/W-52501 - clause 8, Certificate No. Z/02/013/17, issued by the Institute of Mechanised Construction and Rock Mining in Warsaw.
PARAMETERS
13
Materiał:
rungs - aluminium cable - galvanized steel Ø 4mm
Weight:
0.58kg - 1 r.m.
Dimensions:
width: - 310 mm rung spacing: - 310 mm
SPECIAL FEATURES
LADDERS, SCAFFOLDS AND PLATFORMS
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
310 mm
3
6
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
DL 013
Narrow rope ladder – polyester
PN-83/W-52501-CLAUSE 8
Ref. no.: DL 013
1
310 mm
1
attachment loops fitted with thimbles
3
2
fasteners
retaining rings
Ladder conforms with PN-83/W-52501 - clause 8, Certificate No. Z/02/013/17, issued by the Institute of Mechanised Construction and Rock Mining in Warsaw.
2
PARAMETERS
Material:
rungs - aluminium rope - polyester Ø 8mm
Weight:
0,35 kg - 1 r.m.
Dimensions:
width: - 210 mm rung spacing: - 310 mm
LADDERS, SCAFFOLDS AND PLATFORMS
13
210 mm
3
Ladders, scaffolds and platforms
13
7
DL 013C
Narrow rope ladder – polyester
PN-83/W-52501-CLAUSE 8
Ref. no.: DL 013C
1
2
310 mm
1
attachment loops fitted with thimbles
fasteners
3
retaining rings
2
Ladder conforms with PN-83/W-52501 - clause 8, Certificate No. Z/02/013/17, issued by the Institute of Mechanised Construction and Rock Mining in Warsaw. PARAMETERS
Material: Manufacture:
LADDERS, SCAFFOLDS AND PLATFORMS
13
rungs - aluminium rope - polyester Ø 8mm width - 210 mm rung spacing- 310 mm
Weight:
0,3 kg - 1 r.m.
Colour:
black
210 mm
3
8
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
DL 016, DL 017
Cave rope ladder Ref. no.: DL 016, DL 017
3
3
2
1
rung ends in rubber
fasteners
anti-slip rungs
DL 016 - PARAMETERS
Material:
2
Manufacture:
310 mm
310 mm
Weight:
125 mm
150 mm
rungs - aluminium cable - stainless steel Ø 3mm width - 175 mm rung spacing - 310 mm cable spacing - 125 mm 0,2 kg - 1 r.m..
DL 017 - PARAMETERS
13 Manufacture: Weight:
175 mm
DL 016
LADDERS, SCAFFOLDS AND PLATFORMS
Material:
1
rungs - aluminium cable - stainless steel Ø 3mm width - 200 mm rung spacing - 310 mm cable spacing - 150 mm 0,22 kg - 1 r.m.
200 mm
DL 017
Ladders, scaffolds and platforms
13
9
Roof ladder
PN-83/W-52501-CLAUSE 8
Ref. no.: DL 014, DL 015
310 mm
DL 014, DL 015
HOW TO USE?
DL 014 – PARAMETERS
13
Material:
rungs - aluminium cable - galvanized steel Ø 4mm mountings - galvanized steel rubber - EPDM
Manufacture:
width - 310 mm rung spacing - 310 mm
Weight:
2,5 kg - 1 r.m.
LADDERS, SCAFFOLDS AND PLATFORMS
DL 015 - PARAMETERS
Material:
rungs - aluminium rope - polyester Ø 8mm mountings - galvanized steel rubber - EPDM
Manufacture:
width - 310 mm rung spacing - 310 mm
Weight:
2,5 kg - 1 r.m.
310 mm
10
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
METHODS OF LADDER ATTACHMENT
2
3
13
4
LADDERS, SCAFFOLDS AND PLATFORMS
1
Ladders, scaffolds and platforms
13
11
DL 018
Rope ladder Ref. no.: DL 018
rung ends in rubber
3
2
1
attachment loops fitted with thimbles
anti-slip rungs
300 mm
3
PARAMETERS
1
LADDERS, SCAFFOLDS AND PLATFORMS
13
Material: Manufacture:
rungs - aluminium cable - stainless steel Ø 8mm width - 510 mm rung spacing- 300 mm
Weight:
1,80 kg - 1 r.m.
Working load:
200 kg
510 mm
2
12
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
DL 019
“Gangway” rope ladder for horizontal movement Ref. no.: DL 019
3
attachment loops fitted with thimbles
anti-slip rungs
510 mm
rung ends in rubber
3
2
1
300 mm
2
13 LADDERS, SCAFFOLDS AND PLATFORMS
1
PARAMETERS
Material: Manufacture:
rungs - aluminium cable - stainless steel Ø 8mm width - 510 mm rung spacing - 300 mm
Weight:
1,80 kg - 1 r.m.
Working load:
200 kg
Ladders, scaffolds and platforms
13
13
DS 240, DS 241, DS 242
Aluminium telescopic ladder – grey Ref. no.: DS 240, DS 241, DS 242
PRODUCT PRESENTATION
2707 mm
3260 mm
3810 mm
protekt.co/ds240
649,5 mm
691,5 mm
733,5 mm
DS 240 - PARAMETERS
Height when unfolded: Maximum load: Weight:
14
925 mm
821 mm
799 mm
LADDERS, SCAFFOLDS AND PLATFORMS
13
DS 241 - PARAMETERS
DS 242 - PARAMETERS
320 cm 150 kg 13,30 kg
380 cm 150 kg 15,60 kg
REF. NO.:
REF. NO.:
REF. NO.:
DS 240
DS 241
DS 242
260 cm 150 kg 11,10 kg
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
Quick mechanism lock
Exceptionally easy in unfolding and convenient in use, light telescopic ladder made of strengthened anodized aluminium. Available in three heights: 260cm, 320cm and 380cm. The ladder is easy to transport, fits in a car without any problem. The ladder has an easy-to-use and safe mechanism for locking individual sections and rubber feet providing a secure contact with the ground. When operating there is no need of unfolding all ladder sections. Ladder approach angle 70°.
LADDERS, SCAFFOLDS AND PLATFORMS
13
70°
approach angle
Ladders, scaffolds and platforms
13
15
DS 240, DS 241, DS 242
Aluminium telescopic ladder – black Ref. no.: DS 240, DS 241, DS 242
PRODUCT PRESENTATION
2707 mm
3260 mm
3810 mm
protekt.co/ds240
649,5 mm
691,5 mm
733,5 mm
925 mm
821 mm
799 mm
LADDERS, SCAFFOLDS AND PLATFORMS
13
DS 240 - PARAMETERS
DS 241 - PARAMETERS
DS 242 - PARAMETERS
380 cm 150 kg 15,60 kg
Height when unfolded:
260 cm
Maximum load:
150 kg
Weight:
11,10 kg
320 cm 150 kg 13,30 kg
REF. NO.:
REF. NO.:
REF. NO.:
DS 240
DS 241
DS 242
16
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
Quick mechanism lock
Exceptionally easy in unfolding and convenient in use, light telescopic ladder made of strengthened anodized aluminium. Available in three heights: 260cm, 320cm and 380cm. The ladder is easy to transport, fits in a car without any problem. The ladder has an easy-to-use and safe mechanism for locking individual sections and rubber feet providing a secure contact with the ground. When operating there is no need of unfolding all ladder sections. Ladder approach angle 70°.
70°
approach angle
Ladders, scaffolds and platforms
13
17
LADDERS, SCAFFOLDS AND PLATFORMS
13
DS 518, DS 521
Combined ladders
EN 131
Ref. no.: DS 518, DS 521 Combined ladders made of aluminium reinforced with fibre glass. DS 518 - PARAMETERS
Length when folded:
1690 mm
Length when unfolded:
2393 mm
Maximum load:
150 kg
Weight:
12,70 kg
DS 521 - PARAMETERS
DS 518
Length when folded:
3080 mm
Length when unfolded:
4220 mm
Maximum load:
150 kg
Weight:
14,55 kg
DS 521
DS 412
Folding ladder
EN 131
Ref. no.: DS 412
LADDERS, SCAFFOLDS AND PLATFORMS
13
PARAMETERS
Length when folded:
950 mm
Length when unfolded:
4220 mm
Maximum load:
150 kg
Weight:
15,30 kg
18
13 Ladders, scaffolds and platforms
Folding ladders made of aluminium reinforced with glass fibre, folding ladder - 12 rungs.
WWW.PROTEKT.COM.PL
DS 316
Single extension ladders
EN 131
Ref. no.: DS 316, DS 320, DS 336, DS 344
Single extension ladders made of fibre glass with aluminium rungs.
DS 316 - PARAMETERS
Length when folded:
2585 mm
Length when unfolded:
4086 mm
Maximum load:
150 kg
Weight:
14,80 kg
DS 320 - PARAMETERS
Length when folded:
3185 mm
Length when unfolded:
5286 mm
Maximum load:
150 kg
Weight:
18,10 kg
DS 336 - PARAMETERS
5595 mm
Length when unfolded:
9795 mm
Maximum load:
150 kg
Weight:
39,50 kg
13 LADDERS, SCAFFOLDS AND PLATFORMS
Length when folded:
DS 344 - PARAMETERS
Length when folded:
6795 mm
Length when unfolded:
11895 mm
Maximum load:
150 kg
Weight:
49,50 kg
Ladders, scaffolds and platforms
13
19
Aluminium double-sided orchard ladders
EN 131
Ref. no.: DS 600
H
DS 600
D
LADDERS, SCAFFOLDS AND PLATFORMS
13
W
DS 600 16 - PARAMETERS
DS 600 12 -PARAMETERS
DS 600 08 - PARAMETERS
Length when unfolded:
H 4652 x W 1650 x D 2720 mm 100 kg
Weight:
20,20 kg
H 3477 x W 1490 x D 2130 mm 100 kg 12,00 kg
H 2318 x W 1272 x D 1509 mm
Maximum load:
20
13 Ladders, scaffolds and platforms
100 kg 8,20 kg
WWW.PROTEKT.COM.PL
DOUBLE-SIDED LADDERS FULLY MADE OF ALUMINIUM. Orchard ladder for garden and orchard; - aluminium, hardened structure, - feet for ladder stability, - comfortable wide rungs, - enables faster, simpler and more effective fruit harvesting.
LADDERS, SCAFFOLDS AND PLATFORMS
13
Ladders, scaffolds and platforms
13
21
DS 801
Ladder stand Ref. no.: DS 801
PARAMETERS
Material:
galvanized steel
Spacing:
26-45 cm
Ladder stand DS 801 is designed for supporting a single ladder max. 2.5m long. To keep stability, the ladder working height should not be greater than 1.6m.
DS 802
NEW
Ladder support Ref. no.: DS 802
LADDERS, SCAFFOLDS AND PLATFORMS
13
Ladder support DS 802 is designed for supporting a single ladder to improve its stability and protect the wall against damages. PARAMETERS
Material:
22
13 Ladders, scaffolds and platforms
frame - aluminium wheels - rubber
WWW.PROTEKT.COM.PL
RS 100
Light glass fibre scaffold - modular
EN 1004
Ref. no.: RS 100
ELECTRICAL INSULATION
•
All elements of the scaffold are made of very light glass fibre in warning orange,
•
Possibility of expanding the scaffold in the vertical up to 8m (platform height),
•
Possibility of expanding in the horizontal without any limitation (possibility of adjoining individual scaffold modules joined by automatic couplers),
•
Possibility of placing on any ground with level adjustment by means of 4 independently removable legs - extendibility 32.5cm,
•
•
Possibility of easy moving of folded, complete scaffold by rubber wheels with locks preventing against shifting, The scaffold can be placed and assembled by 1 person due to very light elements joined by couplers,
•
electrical insulation (depending on version 25kV or 220kV),
•
resistance to weather conditions, chemical agents and UV radiation.
13 198 cm
80 cm
LADDERS, SCAFFOLDS AND PLATFORMS
Light platform made of glass fibre. Modular structure comprising 7 elements (scaffold, platform, check, 2 barriers: vertical and horizontal).
310 cm
(depending on version 25kV or 220kV)
PARAMETERS
Material:
glass fibre
Dimensions when folded:
200 x 80 x 39 cm
Weight:
83,5 kg
Ladders, scaffolds and platforms
13
23
Column scaffold
EN 1004
Ref. no.: RS 500
162 cm
RS 500
LADDERS, SCAFFOLDS AND PLATFORMS
13
54 cm
102 cm
PARAMETERS
Dimensions when unfolded:
102 x 54 x 162 cm
Dimensions when folded:
24 x 54 x 162 cm
Maximum load:
150 kg (1 user)
Weight:
15 kg
Material:
aluminium
24
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
LADDERS, SCAFFOLDS AND PLATFORMS
13
Ladders, scaffolds and platforms
13
25
MOVABLE PLATFORMS MOBILITY MEETING INDIVIDUAL NEEDS
RS 300
RS 300F
RS 300K
Moveable tank platform
Moveable tank platform with frame
Moveable platform for container service
p. 28
p. 30
RS 300S
RS 300VC
Moveable platform for wagon service
Moveable platform for tubular structures
p. 33
p. 34
p. 32
Possibility platform customization upon Customer’s request and provision of custom orders.
RS 300
Moveable tank platform

Ref. no.: RS 300
PRODUCT PRESENTATION
Safety basket
protekt.co/rs300
made from aluminium tube with rounded corners, welded
Railing
steel, protected against corrosion, painted in yellow
Extension ladder
aluminium, special side surface profiles, anti-slip rungs
Anti-slip rungs Hatch platform
provides safe access to the tank
Mechanism for platform stability
Work rope
steel 6 mm cable, galvanized
Sliding ladder position lock
used for locking position of extension ladder against fixed ladder
13 LADDERS, SCAFFOLDS AND PLATFORMS
Fixed ladder
aluminium, special side surface profiles, anti-slip rungs
Self-locking rescue lifting device RUP-502
approved mechanism, its parts are protected against corrosion (galvanization), adjustment with hand crank
Wheels
rubber wheels, capacity 650kg each
28
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
950 mm
75
°
2920 mm
4155 mm
850 mm
4350 mm
5600 mm
983 mm
1135 mm
Possibility of platform customization upon Customer’s request.
The extension ladder of the platform enables working height adjustment to the desired height (tank truck height). The extension ladder motion against the fixed ladder is locked after working height is adjusted. This provides for additional protection against falling of the ladder. The hatch platform provides problem-free access from the ladder onto the tank truck. Compact structure is supported on six rubber wheels, and can be moved easily to other hatches and taken away from the truck when the work is completed. The structure has aluminium work place railing.
1945 mm
Additional frame equipped with anchor point for personal fall protection equipment (e.g. retractable type fall arrester WR100) provides additional protection when ascending and descending the ladder, and working within the platform. Height of the railing provides protection against falls after tripping or slipping.
PARAMETERS
Dimensions when folded:
4,88 x 2,65 x 3,63 m
Dimensions when unfolded:
6,33 x 2,65 x 3,93 m
Working height:
2,95 m to 4,35 m
Maximum load:
140 kg (1 user)
Weight:
240 kg
The platform ladder is equipped with handrails for safe ascending and descending. The platform is made of high-durability aluminium alloy of special shape, and stable chassis is made of steel protected against the adverse weather conditions. The ladder rungs are made from textured stainless steel sheet preventing user’s slippage.
Ladders, scaffolds and platforms
13
29
13 LADDERS, SCAFFOLDS AND PLATFORMS
1900 mm
1000 mm
600 mm
2033 mm
2652 mm
Moveable tank platform RS 300 F has been designed to enable safe access to loading hatches on tank trucks or container ships. The platform allows worker servicing the tank truck to get on its tank and carry out all the required works in a safe manner.
RS 300F
Moveable tank platform Ref. no.: RS 300F
Safety basket
made from aluminium tube with rounded corners, welded
FRAME WITH ANCHOR POINT
for attachment of personal fall protection equipment
ANCHOR POINT FOR PERSONAL FALL PROTECTION EQUIPMENT COMPLYING WITH - EN 795:2012, E.G. WR100:
Railing
steel, protected against corrosion, painted in yellow
Extension ladder
Hatch platform
aluminium, special side surface profiles, anti-slip rungs
provides safe access to the tank
Sliding ladder position lock
used for locking position of extension ladder against fixed ladder
13 LADDERS, SCAFFOLDS AND PLATFORMS
Fixed ladder
aluminium, special side surface profiles, anti-slip rungs
STABILISING SUPPORTS
Self-locking rescue lifting device RUP502
Mechanism for platform stability
approved mechanism, its parts are protected against corrosion (galvanization), adjustment with hand crank
STEEL AND RUBBER WHEELS - 2 x fixed - 4 x swivel wheels with brake
30
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
Possibility of platform customization upon Customer’s request.
950 mm
75
°
2950 mm
4350 mm
850 mm
4875 mm
6325 mm
983 mm
1135 mm
540 mm
2960 mm 3630 mm
Moveable tank platform RS 300 F has been designed to enable safe access to loading hatches on tank trucks or container ships. The platform allows worker servicing the tank truck to get on its tank and carry out all the required works in a safe manner. The extension ladder of the platform enables working height adjustment to the desired height (tank truck height). The extension ladder motion against the fixed ladder is locked after working height is adjusted. This provides for additional protection against falling of the ladder. The hatch platform provides problem-free access from the ladder onto the tank truck. Compact structure is supported on six rubber wheels, and can be moved easily to other hatches and taken away from the truck when the work is completed. The structure has aluminium work place railing. Additional frame equipped with anchor point for personal fall protection equipment (e.g. retractable type fall arrester WR100) provides additional protection when ascending and descending the ladder, and working within the platform. Height of the railing provides protection against falls after tripping or slipping.
PARAMETERS
Dimensions when folded:
4,88 x 2,65 x 3,63 m
Dimensions when unfolded:
6,33 x 2,65 x 3,93 m
Working height:
2,95 m to 4,35 m
Maximum load:
140 kg (1 user)
Weight:
240 kg
The platform ladder is equipped with handrails for safe ascending and descending. The platform is made of high-durability aluminium alloy of special shape, and stable chassis is made of steel protected against the adverse weather conditions. The ladder rungs are made from textured stainless steel sheet preventing user’s slippage.
Ladders, scaffolds and platforms
13
31
13 LADDERS, SCAFFOLDS AND PLATFORMS
1735 mm
1000 mm
600 mm
2033 mm
2652 mm
3930 mm
RS 300K
NEW
Moveable platform for container service Ref. no.: RS 300K
950 mm
75
°
2650 mm
3950 mm
850 mm
4100 mm
5400 mm
1135 mm
983 mm
Possibility of platform customization upon Customer’s request.
3550 mm 3950 mm
1000 mm
600 mm
2033 mm
2652 mm
1883 mm
LADDERS, SCAFFOLDS AND PLATFORMS
13 1900 mm 1945 mm
PARAMETERS
Dimensions when folded:
3,95 m x 2,65 m x 3,55 m
Dimensions when unfolded:
5,40 m x 2,65 m x 3,95 m
Working height:
od 2,65 m to 4,10 m
Maximum load:
120 kg (1 user)
Weight:
~ 160 kg
REF. NO.:
RS 300K
32
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
NEW
RS 300S
Moveable platform for wagon service Ref. no.: RS 300S
5900 mm
983 mm
1135 mm
Moveable platform for wagon service
1250 mm
4455 mm
75
°
3220 mm
4650 mm
850 mm
3550 mm
1000 mm
600 mm
2033 mm
13 1900 mm
LADDERS, SCAFFOLDS AND PLATFORMS
2652 mm
3950 mm
1945 mm
PARAMETERS
Dimensions when folded:
4,65 m x 2,65 m x 3,55 m
Dimensions when unfolded:
5,90 m x 2,65 m x 3,95 m
Working height:
od 3,22 m to 4,65 m
Maximum load:
120 kg (1 user)
Weight:
~ 170 kgt
REF. NO.:
RS 300S
Ladders, scaffolds and platforms
13
33
RS 300VC
NEW
Moveable platform Ref. no.: RS 300VC
FRAME WITH ANCHOR POINT
Safety basket
for attachment of personal fall protection equipment
made from steel with rounded corners, welded
ANCHOR POINT FOR PERSONAL FALL PROTECTION EQUIPMENT, E.G. WR100:
Extension ladder
aluminium, special side surface profiles, anti-slip rungs
Opened barrier
possibility of opening only after leaning against tank cylinder
Platform
Sliding ladder position lock
provides safe working above object
used for locking position of extension ladder against fixed ladder
Work rope
Anti-slip rungs
steel 6mm cable, galvanized
LADDERS, SCAFFOLDS AND PLATFORMS
13
Self-locking rescue lifting device RUP-502 approved mechanism, its parts are protected against corrosion (galvanization), adjustment with hand crank
Wheels
rubber wheels, capacity 650kg each - 2 x fixed - 4 x swivel wheels with brake
34
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
1133 mm
platform possible horizontal movement
1122 mm
Possibility of platform customization upon Customer’s request.
00 m
platform possible horizontal movement
m
∅ 25
5260 mm
∅ 36
00 m
85
°
3314 mm
m
1416 mm 3050 mm
1060 mm
540 mm
1170 mm
2430 mm
2610 mm
2424 mm
LADDERS, SCAFFOLDS AND PLATFORMS
13
PARAMETERS
Dimensions when folded:
4,47 m x 2,61 m x 4,20 m
Dimensions when unfolded:
3,74 x 2,61 x 5,65 m
Working height:
2,25 m to 3,70 m
Maximum load:
120 kg (1 user)
Weight:
345 kg
Ladders, scaffolds and platforms
13
35
RS 300HAK
Towing hook for platforms Ref. no.: RS 300HAK
Universal hitch head ZSK 750L
Quick mounting
on any RS 300 platform
989 mm
349 mm
145 mm
500 mm
67 mm 160 mm
LADDERS, SCAFFOLDS AND PLATFORMS
13
108 mm
PARAMETERS
Material:
steel
Permissible speed:
max. 5 km/h
36
13 Ladders, scaffolds and platforms
WWW.PROTEKT.COM.PL
Lifting and descending devices Descending devices
14 - 2
Lifting and descending device
14 - 5
Pulleys and pulley blocks
14 - 6
14
TU 410
Pulley block
TU 411 upper pulley TU 411 upper pulley
OK
STOP
OK
OK
min. 700 mm
Cleat locking the rope when lifting
TU 412 lower pulley
14 PARAMETERS TU 412 lower pulley
LIFTING AND DESCENDING DEVICES
21 mm
Pulley block TU 410 is designed to lift and descend materials, loads. It is used mainly in sectional tree felling. Used for controlled descending of the material. By correct weaving the cable through the device, branches or parts (sections) of the trunk can be safely lowered to the ground. This is a perfect solution for use in inaccessible, tight spaces in the crowns of trees. Special remark: Since the gear ratio is 4:1 the ropes ordered should have 4x the length that would normally be ordered for the given use. For instance, there are 15m of operating rope length in a 60m long rope.
10
14
Lifting and descending devices
Dimensions:
250 x 198 mm - TU411 198 x 198 mm - TU412
Weight:
1822 g - TU411 1508 g - TU412
Gear ratio (set):
4:1
MBS:
50 kN
WLL:
10 kN
Through hole diameter:
ø 8 - 12 mm (textile rope)
REF. NO.:
TU 410 (set TU411 + TU 412) TU 411 TU 412
WWW.PROTEKT.COM.PL
TU 413
Pulley block
Machine Directive: 2006/42/EEC
UPPER SWIVEL EYE forged aluminium
INTENDED USE Pulley block TU 413 can be used for tree climbing (sectional tree felling) and load transporting. The device is designed to lift and descend loads. It is not designed for use as personal fall protection equipment.
UPPER PULLEY WITH TWO WHEELS wheels - radilon pulley - galvanized steel
DESIGN The TU 413 pulley block set comprises the following elements: a) upper rope pulley with two wheels b) lower rope pulley with one wheel c) connector for connecting the work rope end to the lower pulley d) work rope
CONNECTOR AZ 011
forged aluminium
LOWER PULLEY WITH ONE WHEEL wheels - radilon pulley - galvanized steel
USED MATERIALS Both (upper and lower) pulleys comprise wheels made of plastic - radilon (set on ball bearings, enabling free wheel motion under load) connected to galvanized steel plates. Axles and fasteners (bolts, nuts, washers) are made of galvanized steel. Each pulley is provided with a swivel eye made of aluminium alloy. The eye on the upper pulley can be additionally rotated against the pulley block body.
WORK ROPE LENGTH RANGE Along with the reduction in force required to lift or descend a load, the rope length “S” required to lift the load for height “H” increases three times. Example: if you want to lift a load at height H = 3m, from the pulley, pull away the rope length S = 3 * H = 3 * 3m = 9m. Take this into account when choosing the required rope length. The pulley block can be used only with textile rope, max. diameter ø 12mm.
UPPER SWIVEL EYE forged aluminium
PARAMETERS REF. NO.:
ROPE LENGTH:
Maximum rope diameter:
ø 12 mm
TU 413
-
Device ratio:
3:1
TU 413 10
10 m
Minimum Breaking Strength (MBS):
50 kN
TU 413 20
20 m
Working Load Limit (WLL):
10 kN
TU 413 30
30 m
Safety Factor:
5:1
TU 413 40
40 m
Weight of set (without work rope):
2,47 kg
TU 413 50
50 m
Lifting and descending devices
14
LIFTING AND DESCENDING DEVICES
POLYESTER WORK ROPE max. diameter ø12mm Rope length required for guiding through the wheels is 2.1m of the rope working length (automatically included in the order).
14
11
TU 415
Pulley with hook 1000kg
PARAMETERS
Material:
galvanized steel, radilon stainless steel, cast iron casting
Weight:
1,14 kg
Dimensions:
300 x 130x 56 mm
Working load:
max. 1000 kg
Steel cable diameter:
6,3 mm
Textile rope diameter:
8,0 - 12,0 mm
Safety Factor:
3:1
Gear ratio:
1:2
WLL:
10 kN
MBS:
40 kN
REF. NO.:
10 kN
TU 416
TU 415
Pulley with hook 2000kg
14
LIFTING AND DESCENDING DEVICES
PARAMETERS
20 kN
Material:
galvanized steel, cast iron casting, stainless steel
Weight:
2,15 kg
Dimensions:
330 x 130x 56 mm
Working load:
max. 2000 kg
Steel cable diameter:
6,3 - 8,0 mm
Textile rope diameter:
12,0 - 14,0 mm
Safety Factor:
3:1
Gear ratio:
1:2
WLL:
20 kN
MBS:
60 kN
REF. NO.:
TU 416
12
14
Lifting and descending devices
WWW.PROTEKT.COM.PL
EXAMPLE USE OF PULLEYS
Pulley
14
PARAMETERS
Dimensions:
133 x 56 x 128 mm
Weight:
450 g
Working load:
max. 1000 kg
Breaking strength:
30 kN
Safety Factor:
5:1
Rope diameter:
6 mm - 12 mm
LIFTING AND DESCENDING DEVICES
PL 101
REF. NO.:
PL 101
Lifting and descending devices
14
13
TU 420
Mini pulley
PARAMETERS
360°
COLOUR VERSIONS
Dimensions:
80 x 44 x 37 mm
Weight:
105 g
Material:
aluminium alloy
MBS:
25 kN
WLL:
5 kN
Safety Factor:
5:1
Maximum rope diameter:
<13,5 mm
Ø mounting hole:
≤16 mm
REF. NO.: blue
orange
black
gold
sany
TU 421
TU 420
Triple pulley
14
LIFTING AND DESCENDING DEVICES
360°
PARAMETERS
COLOUR VERSIONS
Dimensions:
90 x 70 x 37 mm
Weight:
160 g
Material:
aluminium alloy
MBS:
25 kN
WLL:
5 kN
Safety Factor:
5:1
Maximum rope diameter:
<13,5 mm
Ø mounting hole:
≤16 mm
REF. NO.: blue
14
orange
14
black
Lifting and descending devices
gold
sany
TU 421
WWW.PROTEKT.COM.PL
TU 430
Single pulley
EN 12278 Single pulley made of aluminium with movable pads designed for setting up of compound pulley systems. Also suitable in rescue applications. PARAMETERS
COLOUR VERSIONS
Dimensions:
122 x 80 x 38 mm
Weight:
257 g
Material:
aluminium alloy
MBS:
30 kN
WLL:
6 kN
Safety Factor:
5:1
Maximum rope diameter:
<15 mm
REF. NO.: blue
yellow
black
sany
TU 431
red
TU 430
Double pulley
EN 12278
14 Double pulley made of aluminium with movable pads designed for setting up of compound pulley systems. Also suitable in rescue applications.
COLOUR VERSIONS
Dimensions:
162 x 80 x 63 mm
Weight:
470 g
Material:
aluminium alloy
MBS:
30 kN
WLL:
6 kN
Safety Factor:
5:1
Maximum rope diameter:
<15 mm
LIFTING AND DESCENDING DEVICES
PARAMETERS
REF. NO.: gold
red
blue
sany
black
TU 431
Lifting and descending devices
14
15
BP 020
Auto brake pulley
USE
structural anchor point
PULLEY
CONNECTOR (sold separately)
PULLEY
LOAD
MAX 100 kg
twisted rope
PARAMETERS
PULLEY
Dimensions:
190 x 55 x 150 mm
Working Load Limit (WLL):
100 kg
Weight:
â&#x2030;&#x2C6;2,2 kg
Material:
steel, aluminium
14
ROPE
HOOK WITH LATCH
Diameter:
14 mm
Material:
polyester
Manufacture:
twisted rope
INTENDED USE Pulley is designed to lift and descend loads. It is fitted with a mechanism braking the load when the rope is released by the worker who pulls the rope.
SPECIAL FEATURES
PREMITTED TO WORK IN POTENTIALLY EXPLOSIVE AREAS
Material:
powder coated steel
Opening:
26 mm
Weight:
410 g
Load capacity:
1000 kg
Breaking strength:
50 kN
REF. NO.:
CABLE LENGTH
BP 020-20
20,0 m
BP 020-30
30,0 m
BP 020-50
50,0 m
Lifting and descending devices
14
LIFTING AND DESCENDING DEVICES
HOOK WITH LATCH
17
BP 200
Brake pulley
EN 13157:2004+A1:2009, EN 12278:2001 RAMIÄ&#x2DC; BP210 sold separately
PULLEY
USE
LOCKED POSITION
POSITION WHEN LIFTING
twisted rope
HOOK WITH LATCH BRAKE
14
PARAMETERS LOAD
PULLEY
Dimensions:
300 x 300 x 54 mm
Working Load Limit (WLL):
100 kg
INTENDED USE
Weight:
LIFTING AND DESCENDING DEVICES
BRAKE
Material:
galvanized steel
ROPE
Diameter:
16 mm
Material:
polyester
Manufacture:
twisted rope
Pulley with load capacity of 460kg is designed for manual lifting and descending of free loads with use of rope, 18mm dia. The pulley design complies with European Parliament and Council Directive 2006/42/EC and harmonized standards EN13157:2004+A1:2009 and EN 12278:2001.
HOOK WITH LATCH
Material:
galvanized steel
REF. NO.:
CABLE LENGTH
Opening:
26 mm
BP 200 20
20 m
Weight:
410 g
BP 200 30
30 m
Load capacity:
1000 kg
BP 200 40
40 m
Breaking strength:
50 kN
BP 210 - arm
18
14
Lifting and descending devices
WWW.PROTEKT.COM.PL
Ground tents, screens and safety barriers Screens
15 - 2
Ground tents
15 - 12
Safety barriers
15 - 21
Protection netting
15 - 22
Warning signs
15 - 31
15
GT 020
Screen
Ref. no.: GT 020
STRENGTHENED ALUMINIUM JOINTS AUXILIARY HANDLE FOR SCREEN UNFOLDING
STRENGTHENED GLASS-FIBRE RACK POLES
15
GROUND TENTS, SCREENS AND SAFETY BARRIERS
SCREEN STABILISING FEET
2
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
15
GROUND TENTS, SCREENS AND SAFETY BARRIERS
COLOUR VERSIONS AVAILABLE FOR POLICE AND FIRE SERVICE.
CARGO BAG INCLUDED
COLOUR VARIANTS
PARAMETERS
Red
01
Blue
02
REF. NO.:
DIMENSIONS
WEIGHT
GT 020 160 clean
1,60 x 1,60 m
4,70 kg
GT 020 161 with printing
1,60 x 1,60 m
4,70 kg
Number of segments:
4
GT 020 180 clean with feets
1,80 x 1,80 m
11,7 kg
Segment dimensions:
1.60 x 1.60m or 1.80 x 1.80m
GT 020 181 with printing and feets
1,80 x 1,80 m
11,7 kg
Ground tents, screens and safety barriers
15
3
GT 030
Screen with reflective tapes
Ref. no.: GT 030
AUXILIARY HANDLE FOR SCREEN UNFOLDING
STRENGTHENED ALUMINIUM JOINTS
15
GROUND TENTS, SCREENS AND SAFETY BARRIERS
SCREEN STABILISING FEET
COLOUR VERSIONS AVAILABLE FOR POLICE AND FIRE SERVICE. 4
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
GROUND TENTS, SCREENS AND SAFETY BARRIERS
15
COLOUR VARIANTS
CARGO BAG INCLUDED
PARAMETERS
Red
01
Blue
02
REF. NO.:
DIMENSIONS
WEIGHT
GT 030 160 clean
1,60 x 1,60 m
5,75 kg
GT 030 161 with printing
1,60 x 1,60 m
5,75 kg
Number of segments:
4
GT 030 180 clean with feets
1,80 x 1,80 m
11,7 kg
Segment dimensions:
1.60 x 1.60m or 1.80 x 1.80m
GT 030 181 with printing and feets
1,80 x 1,80 m
11,7 kg
Ground tents, screens and safety barriers
15
5
GT 040
Adjustable screen Ref. no.: GT 040
COMFORTABLE AND QUICK COVER ASSEMBLY
SCREEN HEIGHT VARIABLE ADJUSTMENT by clamping coupler.Telescope is made from aluminium tube and plastic. Telescope is made from aluminium tube and plastic.
15
GROUND TENTS, SCREENS AND SAFETY BARRIERS
LEG POSITION ANGLE ADJUSTMENT (each leg individually), joints are made of galvanized steel.
variable height adjustment: ~ 1250â&#x20AC;&#x201C;1950mm
3050 mm
VARIABLE HEIGHT ADJUSTMENT
Adjustable screen designed for guarding and sheltering of locations during traffic accidents, natural disasters, etc. Variable screen length adjustment ~1.25 - 1.95m with side telescopic tripods. Adjustment of leg position up and down in relation to the horizontal. Leg transport lock. The kit includes cargo bag and cover for folded equipment
6
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
15
COLOUR VERSIONS AVAILABLE FOR POLICE AND FIRE SERVICE.
GROUND TENTS, SCREENS AND SAFETY BARRIERS
SCREENS CAN BE COMBINED TOGETHER
BASE LEGS tube Ã&#x2DC; 33.7 made of galvanized steel and plastic
PARAMETERS
COLOUR VARIANTS Red
01
Blue
02
Weight:
15,50 kg
Dimensions:
height: 1,25-1,95 m, width: 3,05 m+
REF. NO.:
Material:
fabric: polyester, rack: galvanized steel, aluminium
GT 040
Ground tents, screens and safety barriers
15
7
GT 050
Adjustable screen with reflective tapes Ref. no.: GT 050 1,48 m
height adjustment 1.10m - 1.78m
FABRIC ATTACHED TO RACK BY VELCRO FASTENERS
15
SCREEN HEIGHT ADJUSTMENT KNOB
LOWER TRANSVERSE BEAM CAN BE MOUNTED USING KNOB OR ON HOOK
REFLECTIVE TAPE
GROUND TENTS, SCREENS AND SAFETY BARRIERS
EXTENDIBLE RACK LEGS
SCREENS CAN BE COMBINED TOGETHER
0,67 m
CARGO BAG INCLUDED
SCREEN CAN BE FIXED ON SOFT GROUND USING PINS
Adjustable screen designed for guarding and sheltering of locations during traffic accidents, natural disasters, etc. The kit includes cargo bag and cover for the fabric.
PARAMETERS
COLOUR VARIANTS Dimensions when folded:
0,15 x 0,15 x 1,5 m
Red
01
Max dimension of screen when unfolded::
1,78 x 1,48 m
Blue
02
Material:
fabric - polyester rack - powder-coated steel
REF. NO.:
Weight:
13 kg
GT 050
8
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
GT 140
Forensic tent Ref. no.: GT 140 AUXILIARY HANDLE FOR SCREEN UNFOLDING
ZIPPER FOR TOP WALLS OPENING
15 TOP WALLS CAN BE OPENED
Light and durable folding tent for covering of corpse on the inspection of the scene, site inspection, etc. Intended for the use by police, fire brigade, coroner, funeral home, etc. Tent is folding thanks to resilient rack, without unfolding to smaller pieces. Top walls are opened by zippers allowing for the inspection inside, without having to remove the tent. Possibility of providing an additional inscription, e.g. “CRIME SCENE”, “POLICE”, “CORONER” at an extra charge. Transport cover included.
GROUND TENTS, SCREENS AND SAFETY BARRIERS
STRENGTHENED INNER ALUMINIUM JOINTS
CARGO BAG INCLUDED
COLOUR VARIANTS PARAMETERS Dimensions when folded:
17 x 79 cm
Dimensions of ground tent when folded:
220 x 110 x 95 cm
Material:
fabric - water-proof fabric: microfibre (black), polyester (red, blue) rack - aluminium, glass fibre
Weight:
4,0 kg
Red
01
Blue
02
Black
03
REF. NO.:
GT 140 - black GT 140 - red, blue
Ground tents, screens and safety barriers
15
9
GT 070
Flame retardant screen
ADDITIONAL HANDLE FOR DEPLOYING SCREEN.
REINFORCED ALUMINIUM INTERNAL HINGES
3
SEGMENTS VERSION
15
1,60 x 1,60 m lub 1,80 x 1,80 m
GROUND TENTS, SCREENS AND SAFETY BARRIERS
1,60 x 1,60 m lub 1,80 x 1,80 m
SCREEN STABILIZER FOOT
4
SEGMENTS VERSION
PARAMETERS
Number of segments:
from 2 to 4
Dimensions of the segments:
1,60 x 1,60 m lub 1,80 x 1,80 m
Material:
XISPAL 825 + fire retardant plaville
Transport dimensions:
20x20x120 in a bag
SEGMENTS
COLOUR VARIANTS Bright yellow/green
10
15 Ground tents, screens and safety barriers
01
2 VERSION
WWW.PROTEKT.COM.PL
GROUND TENTS, SCREENS AND SAFETY BARRIERS
15
Ground tents, screens and safety barriers
15
11
GT 110
Safety tent Ref. no.: GT 110
GROUND TENTS, SCREENS AND SAFETY BARRIERS
15
OWŁOKI
H2O
Openings for ventilation ducts
New strengthened fibre-glass rack poles Ø 12
New strengthened aluminium joints
Window holes protected with meshing
PARAMETERS Safety tent GT 110 is designed to provide shelter against weather conditions during works in manholes, etc.
10,00 kg
Dimensions:
180 x 180 x 180 cm
Dimensions when folded: 140 x 25 x 25 cm
REF. NO.:
Time of unfolding/folding: 3 min
GT 110
12
Weight:
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
AT 201
Scissor fence Ref. no.: AT 201
Scissor fence is designed for warning, and securing and guarding of work locations. Used for works at sewer and telecom manholes. PARAMETERS
Height:
1,24 m
Weight:
4,75 kg
Unfolded fence:
max. side length 2.13m
15 REF. NO.:
AT 201
AT 202
Scissor barrier
GROUND TENTS, SCREENS AND SAFETY BARRIERS
Ref. no.: AT 202
Four panel scissor barrier is designed for warning, and securing and guarding of work locations. Used for works at sewer and telecom manholes.
PARAMETERS
Height:
1,24 m
Weight:
19 kg
Folded barrier:
0,25 x 0,25 x 1,24 m
Unfolded barrier:
max. side length 2.13m max. length 8.52m
REF. NO.: AT 202
14
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
AT 203
Fence Ref. no.:AT 203
MOVEABLE JOINTS
MOVEABLE JOINTS
QUICK AND COMFORTABLE DEPLOYMENT
15
Deploy the fence on your own in just .
5 s.
168 cm
GROUND TENTS, SCREENS AND SAFETY BARRIERS
17 cm
PARAMETERS
Four panel scissor barrier is designed for warning, and securing and guarding of work locations. Used for works at sewer and telecom manholes.
Material:
powder coated steel
Weight:
15 kg
Unfolded fence:
1,70 x 1,70 x 1,68 m
Unfolded fence:
0,17 x 0,17 x 1,68 m
REF. NO.: AT 203
Ground tents, screens and safety barriers
15
15
AT 241
L+P-90 P P+40
GROUND TENTS, SCREENS AND SAFETY BARRIERS
15
spring mechanism
P - Space required for security L - Length to which the gate should be shortened before assembly
PARAMETERS
Material:
galvanized steel powder coated
(1200 mm length is the standard supplied).
Weight:
8 kg / 1.200 mm
The AT 241 self-closing gate is a functional device enabling safe use of ladders, eg on silos or separating transitions in different locations.
Dimensions:
0,25 x 0,25 x 1,24 m
Unfolded barrier:
1100 x 426 mm
REF. NO.: AT 241
18
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
430 mm
100 mm
385 mm
Self - closing gate
AT 242
Skylight security system
GROUND TENTS, SCREENS AND SAFETY BARRIERS
15
PARAMETERS AT 242 is a system of fall protection grids (protection of skylights on flat and sloping roofs up to 15°) Installation without interfering with the roof sheathing - freestanding. The AT 242 system consists of intermediate modules and end modules with a maximum length of 1.2 m and a width of 2.5 m and legs with adjustable height.
Material:
hot-dip galvanized steel
Ability to absorb the kinetic energy of the fall: :
1400 J
Max. width of the protected skylight: Max. length of the protected skylight:
2,5 m 1,2 m
Length:
without limits
Height:
adjustable
REF. NO.: AT 242
20
15 Ground tents, screens and safety barriers
WWW.PROTEKT.COM.PL
AN EXAMPLE OF THE APPLICATION OF THE AP 242 SYSTEM ON THE ROOF
15
AN EXAMPLE OF THE GRID STRENGTH TEST
The weight of the ball with a diameter of 0.5 m is 100 kg (according to PN-EN 1263-1 standard).
•
The height of the ball drop on the grid is 1.4 m.
GROUND TENTS, SCREENS AND SAFETY BARRIERS
•
Ground tents, screens and safety barriers
15
21
ZS 010
Manhole protection Ref. no.: ZS 010
258 mm
max. spacing 700mm
min. spacing 497 mm
GROUND TENTS, SCREENS AND SAFETY BARRIERS
15
PARAMETERS ZS 010 is a device for the protection of open manholes. Variable adjustment to suit to any type of manhole.
Material:
powder coated steel
Weight:
3,8 kg
REF. NO.:
Dimensions:
497/700 x 258 x 66 mm
ZS 010
Ground tents, screens and safety barriers
15
33
GROUND TENTS, SCREENS AND SAFETY BARRIERS
15
Ground tents, screens and safety barriers
15
35
ADDITIONAL ACCESSORIES
16
36
16
Additional accessories
WWW.PROTEKT.COM.PL
Additional accessories Bosunâ&#x20AC;&#x2122;s chairs
16 - 2
Climbing
16 - 4
Tool lanyards
16 - 10
Tool holders
16 - 18
Cargo bags
16 - 20
Cargo cases and boxes
16 - 23
Covers
16 - 26
Straps for heavy load handling
16 - 29
Line throwing weights
16 - 30
Tree climbing carts
16 - 35
Paints and applicators
16 - 34
Fans
16 - 38
16
BA
Bosun’s chair Ref. no.: BA Bosun’s chair BA including work rope. When working with the chair it is required to additionally use fall protection equipment. Person using the chair can be descended and lifted (gear ratio 1:4). PARAMETERS
Seat dimensions:
530 x 270 mm
REF. NO.:
OPERATING RANGE
BA 010
0-10 m
BA 020
0-20 m
BA 030
0-30 m
BA 040
0-40 m
SEAT WITH HOLDERS
BA 100
Bosun’s chair Ref. no.: BA 100
PRODUCT PRESENTATION protekt.co/ba100
Bosun’s chair with seat finished in anti-slip fabric. Side profiling provides stability during work.
PARAMETERS
16 ADDITIONAL ACCESSORIES
Seat dimensions:
530 x 190 mm
REF. NO.:
BA 100
36
16
Additional accessories
WWW.PROTEKT.COM.PL
BA 200
Bosun’s chair Ref. no.: BA 200
Bosun’s chair, fitted with a safety strap and a seat with thermal insulation lining. 4 connectors AZ 011 are included.
PARAMETERS
Seat dimensions:
530 x 270 mm
REF. NO.:
BA 200
Bosun’s chair Ref. no.: BA 300
Bosun’s chair is made of tarpaulin fabric. Load bearing textile webbings with equipment holders and one closed pocket, dimensions 230 x 200mm.
PARAMETERS
Seat dimensions:
16 530 x 190 mm
ADDITIONAL ACCESSORIES
BA 300
REF. NO.:
BA 300
Additional accessories
16
37
CD 401
Rigging plate Ref. no.: CD 401
Rigging plate is designed for quick setting up of complex rigs thanks to numerous boreholes for connectors. Rigging plate has a large single main connecting point and three holes 20mm dia for connectors. PARAMETERS
Weight:
62 g
Strength:
36 kN
Dimensions:
90 x 83,5 mm
Material:
aluminium
REF. NO.:
CD 401
CD 402
Rigging plate Ref. no.: CD 402
Rigging plate designed for quick forming of complex rigs thanks to numerous boreholes for connectors. Rigging plate enables extension of connecting points on a rig. It has a large single main connecting point with two auxiliary holes, and 5 holes 20mm dia for connectors.
PARAMETERS
ADDITIONAL ACCESSORIES
16
Weight:
240 g
Strength:
50 kN
Dimensions:
100 x 159 mm
Material:
aluminium
REF. NO.:
CD 402
38
16
Additional accessories
WWW.PROTEKT.COM.PL
CD 403
Rigging plate Ref. no.: CD 403
Rigging plate enables perfect alignment of connectors in the line of action of the force. It can also be used as a main rigging point in complex systems. The rigging plate has 5 holes 20mm dia at one side, and 8 holes 20mm dia for connectors. PARAMETERS
Weight:
500 g
Strength:
50 kN
Dimensions:
149 x 248 mm
Material:
aluminium
REF. NO.:
CD 403
Double pulley Ref. no.: CD 101
Double pulley CD 101 is a device designed for horizontal transport using textile ropes of up to 13mm dia.
16 ADDITIONAL ACCESSORIES
CD 101
PARAMETERS
Weight:
250 g
Dimensions:
103 x 90 x 33 mm
REF. NO.:
CD 101
Additional accessories
16
39
CD 201, CD 202
Chest ascender Ref. no.: CD 201, CD 202
Chest ascender CD 201 and CD 202 without handle is designed for rope ascending or belaying. To be used with a kernmantle rope 8-13mm dia. Fitted with rope grab. PARAMETERS
Weight:
220 g
Dimensions:
134 x 90 x 28 mm
REF. NO.:
CD 201 CD 202
CD 201L, CD 202L
Chest ascender Ref. no.: CD 201L, CD 202L
Chest ascender CD 201 ultra light and CD 202 ultra light without handle is designed for rope ascending or belaying. To be used with a kernmantle rope 8-13mm dia. Fitted with rope grab.
16 ADDITIONAL ACCESSORIES
PARAMETERS
Weight:
135 g
Dimensions:
112 x 95 x 23 mm
REF. NO.:
CD 201L CD 202L
40
16
Additional accessories
WWW.PROTEKT.COM.PL
CD 211, CD 212
Chest ascender Ref. no.: CD 211, CD 212
Handled ascender CD 211 and CD 212 with handle for right- and left-hand users is designed for rope ascending on vertical surfaces or on slopes. To be used with a kernmantle rope 8-13mm dia. Fitted with rope grab.
PARAMETERS
Weight:
220 g
Dimensions:
207 x 100 x 28 mm
REF. NO.:
CD 211 CD 212
CD 211L, CD 212L î&#x20AC;˘
Chest ascender Ref. no.: CD 211L, CD 212L
PRODUCT PRESENTATION protekt.co/cd211l
Belay CD 211 ultra light and CD 212 ultra light with handle for right- and left-handed users is designed for rope ascending on vertical surfaces or on slopes. To be used with a kernmantle rope 8-13mm dia. Fitted with rope grab.
16
Weight:
205 g
Dimensions:
190 x 93 x 24 mm
ADDITIONAL ACCESSORIES
PARAMETERS
REF. NO.:
CD 211L CD 212L
Additional accessories
16
41
CD 302
Rigging plate Ref. no.: CD 302
Rappel eight CD 302 is used rappel or rescue with use of a single or half rope.
PARAMETERS
Weight:
80 g
Dimensions:
108 x 80 x 7 mm
REF. NO.:
CD 302
CD 303
Rigging plate Ref. no.: CD 303
16
Rappel eight CD 303 for rope descending.
ADDITIONAL ACCESSORIES
PARAMETERS
Weight:
80 g
Dimensions:
131 x 74 mm
Rope diameter:
8 - 13 mm
REF. NO.:
CD 303
42
16
Additional accessories
WWW.PROTEKT.COM.PL
KR 200, KR 210
Swivel Ref. no.: KR 200, KR 210
PARAMETERS KR 200 SWIVEL SHACKLE WITH BEARINGS Weight:
KR 210
167 g
157 g
Dimensions:
113 x 54 x 34 mm
113 x 54 x 34 mm
Materiał:
aluminium alloy
aluminium alloy
no less than 30 kN
no less than 30 kN
less than 50 kN
less than 50 kN
Static strength: Breaking strength:
REF. NO.:
KR 200
K 210
K 200
KR 210
KLK 100, KLK 200
ø4
ø2
6m m
8m m
ø1
2m
m
ø1
2m
m
Ref. no.: KLK 100, KLK 200
ADDITIONAL ACCESSORIES
16
KLK 200
KLK 100 REF. NO.:
KLK 100 KLK 200
Additional accessories
16
43
AY 004
Periodical inspection tag Ref. no.: AY 004
PARAMETERS
Orange
01
Blue
04
Yellow
02
Grey
05
Green
03
Red
06
Periodical inspection tag for marking of the date of the next periodical inspection of the equipment. Available in different colours on request.
REF. NO.:
AY 005
AY 001
Perforator for periodical inspection tag AY 004
AY 004
Ref. no.:AY 005
Wrist tool lanyard Ref. no.:AY 001
ADDITIONAL ACCESSORIES
16
REF. NO.:
REF. NO.:
AY 005
AY 001
44
16
Additional accessories
WWW.PROTEKT.COM.PL
AY 002
Belt tool lanyard Ref. no.: AY 002
PARAMETERS
Maximum load:
2 kg
Lanyard length:
max. 120 cm
Static strength:
15 daN / 3 min with no break
REF. NO.:
AY 002
Retractable tool holder Ref. no.: AY 003
16
PARAMETERS
Maximum load:
2 kg
Lanyard length:
max. 115 cm
Static strength:
35 daN / 3 min with no break
ADDITIONAL ACCESSORIES
AY 003
REF. NO.:
AY 003
Additional accessories
16
45
AY 010
Retractable tool holder with lanyard lock Ref. no.: AY 010
Retractable tool holder with lanyard lock and webbing for wearing on the wrist. PARAMETERS
max 115 cm
LANYARD LOCK
Maximum load:
2 kg
Lanyard length:
max 115 cm
Static strength:
35 daN
REF. NO.:
AY 010
AY 011
Wrist tool lanyard
AY 012
Tool lanyard for left-hand users Ref. no.: AY 012
Ref. no.:AY 011
ADDITIONAL ACCESSORIES
16 PARAMETERS
Maximum load:
2 kg
Lanyard length:
max. 115 cm
Static strength:
35 daN / 3 min with no break
REF. NO.:
REF. NO.:
AY 011
AY 012
46
16
Additional accessories
WWW.PROTEKT.COM.PL
AY 023
Steel tool lanyard
AY 032
Fast Ref. no.: AY 032
Ref. no.: AY 023
PARAMETERS
Dimensions:
45 x 15 x 20 mm
Size:
universal
Weight:
5g
Material:
polyamide
REF. NO.:
REF. NO.:
AY 023
AY 032
AY 024
Connecting lanyard
KLK 420
Ref. no.: AY 024
Ref. no.: KLK 420
PARAMETERS
16
Lanyard length without rings:
30 cm
Ring diameter:
45 mm
Weight:
25 g
Material:
plastic-coated galvanized steel cable ø 2mm
KLK 420 16
ADDITIONAL ACCESSORIES
KLK 420 26
KLK 420 12
REF. NO.:
ROPE DIAMETER
KLK 420 12
ø 12 mm
REF. NO.:
KLK 420 16
ø 16 mm
AY 024
KLK 420 26
ø 26 mm
Additional accessories
16
47
AY 033
Connector-stabilising thimble guard
NEW
Ref. no.: AY 033
PARAMETERS New, easy-to-use connector-stabilising thimble guard, intended for textile ropes 12mm and 14mm. Weight:
20 g
Material:
EPDM
REF. NO.:
Dimensions:
61 x 50 x 30 mm
AY 033
AY 034
Connector stabiliser
NEW
Ref. no.: AY 034
ADDITIONAL ACCESSORIES
16 New, easy-to-install connector stabiliser to be used with various textile ropes and webbings. PARAMETERS
Weight:
3,5 g
Material:
thermoplastic elastomere
REF. NO.:
Dimensions:
65 x 20 x 5 mm
AY 034
48
16
Additional accessories
WWW.PROTEKT.COM.PL
AY 040, AY 041
NEW
Tool lanyard Ref. no.: AY 040, AY 041
TOOL LANYARD opening ø 7 mm
TOOL LANYARD opening ø 4 mm
PLASTIC-COATED STEEL CABLE ø 4,5 mm
SNAP HOOK WITH SWIVEL opening ø 9 mm
PARAMETERS
Maximum load:
1 kg
Cable length:
63 cm
Maximum extension:
max. 150 cm
Material:
plastic-coated galvanized steel cable ø 4.5mm
ADDITIONAL ACCESSORIES
16
REF. NO.:
AY 040
AY 040
AY 041
AY 041
Additional accessories
16
49
AY 051
Tool lanyard Ref. no.: AY 051
Tool lanyard – protection against dropping of tools, e.g. chainsaw. Strong seams, inverted loops – always open. STRONG SEAM
PARAMETERS
INVERTED LOOPS
Material:
polyester
Webbing width:
25 mm
Length:
1.3 m
Static strength:
5 kN
SWL:
50 kg
Safety Factor:
7:1
REF. NO.:
AY 051
AY 052
Tool lanyard INVERTED LOOPS
Ref. no.: AY 052
Tool lanyard – protection against dropping of tools, e.g. chainsaw. Strong seams, handy inverted loops.
PARAMETERS
ADDITIONAL ACCESSORIES
16
STRONG SEAM
Material:
polyester
Webbing width:
25 mm
Length:
1.3 m
Static strength:
5 kN
SWL:
50 kg
Safety Factor:
7:1
REF. NO.:
AY 052
50
16
Additional accessories
WWW.PROTEKT.COM.PL
AY 053
Tool lanyard
INVERTED LOOPS
Ref. no.: AY 053
Tool lanyard – protection against dropping of tools, e.g. chainsaw. Strong seams, handy inverted loops.
STRONG SEAM
PARAMETERS
Material:
polyester
Webbing width:
25 mm
Length:
1.3 m
Static strength:
5 kN
SWL:
50 kg
Safety Factor:
7:1
REF. NO.:
AY 053
AY 054
Tool lanyard Ref. no.: AY 054
Tool lanyard – protection against dropping of tools, e.g. chainsaw. Strong seams, handy inverted loops. STRONG SEAM
PARAMETERS
CLIP
Material:
polyester
Webbing width:
25 mm
Length:
1.3 m
Static strength:
600 N
SWL:
8 kg
Safety Factor:
7:1
16 ADDITIONAL ACCESSORIES
ELASTIC LANYARD ø 4 mm
REF. NO.:
AY 054
Additional accessories
16
51
AY 061
Tool holder Ref. no.: AY 061
Tool holder to be attached to a harness.
PARAMETERS
Webbing width:
40 - 55 mm
Material:
natural leather
Dimensions:
170 x 200 mm
Weight:
85 g
REF. NO.:
AY 061
AY 100
Tool holder Ref. no.: AY 100
16
AY 100 - tool holder:
ADDITIONAL ACCESSORIES
• • • • •
attached on belt or full body harness or harness straps, provides stable position during work, enables easy access, provides optimum tool arrangement, enables connection of an additional tool lanyard..
AY 100 IS NOT PERSONAL FALL PROTECTION EQUIPMENT.
REF. NO.:
AY 100
52
16
Additional accessories
WWW.PROTEKT.COM.PL
AY 201, AY 202
Trauma strap Ref. no.: AY 201, AY 202
AY 202
Trauma strap AY 201 and AY 202 is designed to alleviate the effects of suspension trauma on a worker who has fallen in full body harness. It can be attached to full body harness and enables shifting the workerâ&#x20AC;&#x2122;s body weight onto the leg.
TU 300
REF. NO.:
LENGTH
AY 201
120 cm
AY 202
105 cm
Auxiliary hook Ref. no.: TU 300
Auxiliary hook is designed for attachment of equipment and accessories required for work to full body harness. Provides an additional alternative for attaching equipment while tree climbing, helps user to keep both hands free to improve the overall safety. TU 300 IS NOT PERSONAL FALL PROTECTION EQUIPMENT.
16 PARAMETERS
Maximum Working Load (WLL):
50 kg
Maximum load:
10 kg
Minimum Breaking Strength (MBS):
500 kg
ADDITIONAL ACCESSORIES
AY 201
REF. NO.:
TU 300
Additional accessories
16
53
AX 008-AX 012
Cargo bag Ref. no.: AX 008, AX 010, AX 011, AX 012 Cargo bag made from reinforced PVC fabric. PARAMETERS
Material:
reinforced PVC
COLOURS
AX 012
AX 008
AX 011D, AX 011K
Yellow
01
Red
02
Blue
03
REF. NO.:
DIMENSIONS
CAPACITY
AX 008 pÅ&#x201A;aski
420 x 400 mm
16 l
AX 010
380 x 380 x 450 mm
36 l
AX 011
300 x 300 x 600 mm
33 l
AX 012
400 x 400 x 800 mm
81 l
Cargo bags Ref. no.: AX 011D, AX 011K
Cargo bag made from reinforced PVC fabric. PARAMETERS
Material:
16
reinforced PVC
COLOURS
ADDITIONAL ACCESSORIES
AX 011D
AX 011N
Yellow
01
Red
02
Blue
03
REF. NO.:
DIMENSIONS
AX 011D
300 x 300 x 600 mm 33 l
AX 011N
300 x 300 x 600 mm 33 l
AX 011K
300 x 300 x 600 mm 33 l
CAPACITY
AX 011K
54
16
Additional accessories
WWW.PROTEKT.COM.PL
AX 013A
Carrying equipment bag Ref. no.:AX 013A Bag made from reinforced PVC. • • •
internal plastic foil pocket for instruction manual; adjustable arm strap with padding; additional adjustment strap for improved use comfort.
PARAMETERS
Material:
reinforced PVC
COLOUR VERSIONS
AX 016
Yellow
01
Red
02
Blue
03
REF. NO.:
DIMENSIONS
AX 013A
600 x 450 x 450 mm 20 l
AX 801
Cargo bag
CAPACITY
Ballast bag Ref. no.:AX 801
Ref. no.: AX 016
Ballast bag for work rope of rope grab compliant with EN 353-2 (LINOSTOP II, AC 010). The bag can be loaded e.g. with sand up to 5kg. PARAMETERS
16
reinforced PVC
ADDITIONAL ACCESSORIES
Material:
COLOUR VERSIONS
REF. NO.:
DIMENSIONS
CAPACITY
REF. NO.:
AX 016
1800 x 230 x 200 mm
75 l
AX 801
DIMENSIONS
Yellow
01
Red
02
Blue
03
CAPACITY
Additional accessories
16
55
AX 070
AX 080
Arborist bag
Arborist bag
Large arborist bag: Ergonomic arborist bag: • • • • •
sewn breathable padding for improved wearing comfort, 2 pockets for power saws, convenient connector mounting system removable bottom.
PARAMETERS
ADDITIONAL ACCESSORIES
16
• • •
double compartment for easier arrangement of loading space, 5 internal pockets, possibility of back pack division (2 detachable baskets), convenient straps for handling.
PARAMETERS
Weight:
1490 g
Weight:
2680 g
Material:
90% PVC, 10% polyester
Material:
polyester
Dimensions:
600 x 310 x 250 mm
Dimensions:
800 x 350 x 350 mm
COLOUR VERSIONS
COLOUR VERSIONS
Orange-black
01
Black-red
01
REF. NO.:
DIMENSIONS
CAPACITY
REF. NO.:
DIMENSIONS
CAPACITY
AX 070 - without snap hooks
600 x 310 x 250 mm
40 l
AX 080
800 x 350 x 350 mm
80 l
56
16
Additional accessories
WWW.PROTEKT.COM.PL
Toolbox
AX 320
Carry case Ref. no.: AX 321, AX 322
Ref. no.: AX 310, AX 311, AX 312
REF. NO.:
DIMENSIONS
AX 310
410 x 210 x 190 mm
REF. NO.:
DIMENSIONS
WAGA
AX 311
510 x 260 x 230 mm
AX 321
430 x 280 x 90 mm
2560 g
AX 312
580 x 290 x 280 mm
AX 322
430 x 280 x 120 mm 2860 g
AX 323
Toolbox Ref. no.: AX 323
16
Ballast bag for work rope of rope grab compliant with EN 353-2 (LINOSTOP II, AC 010). The bag can be loaded e.g. with sand up to 5kg.
REF. NO.:
DIMENSIONS
AX 323
340 x 308 x 126 mm
Additional accessories
16
57
ADDITIONAL ACCESSORIES
AX 310
TA 211
Tool case
Ref. no.:TA 211, TA 221, TA 224
Metal case for equipment. PARAMETERS
Material:
TA 301
powder coated steel
REF. NO.:
DIMENSIONS
WEIGHT
TA 211
430 x 280 x 90 mm
2560 g
TA 221
430 x 280 x 120 mm
2860 g
TA 224
430 x 280 x 180 mm
3400 g
Tool bag Ref. no.:TA 301, TA 302
Cargo bag made from reinforced PVC fabric.
PARAMETERS
16
Material:
reinforced PVC
ADDITIONAL ACCESSORIES
COLOUR VERSIONS
58
16
Additional accessories
Yellow
01
Red
02
Blue
03
REF. NO.:
DIMENSIONS
TA 301 - single pocket
330 x 100 x 300 mm 360 g
TA 302 - two pocket
330 x 100 x 300 mm 360 g
WEIGHT
WWW.PROTEKT.COM.PL
TA 060
Energy absorber ABM cover Ref. no.: TA 060 PARAMETERS
Material:
polyester / PVC fabric
COLOUR VERSIONS
01
02
03
04
05
06
REF. NO.:
TA 060
TA 061
Energy absorber ABM aramid cover
TA 070
Ref. no.: TA 070
Ref. no.: TA 061
PARAMETERS
16
Material:
ADDITIONAL ACCESSORIES
Absorber cover
poliester
Dimensions of an absorber available for use with the bag:
PARAMETERS
Material:
aramid fabric
Height (without ferrule):
185 +/- 5 mm
Width:
135 +/- 5 mm
Thickness:
70 +/- 5 mm
Strap length:
400 - 800 mm
REF. NO.:
REF. NO.:
TA 061
TA 070
60
16
Additional accessories
WWW.PROTEKT.COM.PL
PS 001
Multi-purpose padding for shoulder straps
PS 003
Multi-purpose padding for shoulder strap
Ref. no.: PS 001
Ref. no.: PS 003
Padding for shoulder straps on full body harness. Made of fabric-coated neoprene foam. Improves comfort when working in full body harness, and helps reduce constriction caused by the shoulder straps. Facilitates wearing of full body harness. Can be used with all types of full body harnesses manufactured by PROTEKT.
Multi-purpose pad for full body harness. Made of leather and fabric coated neoprene foam. Improves comfort when working in full body harness, and helps reduce constriction caused by the straps. Can be used with all types of full body harnesses manufactured by PROTEKT. The padding protects harness straps against damage.
REF. NO.:
REF. NO.:
PS 001
PS 003
PS 002
Multi-purpose padding for shoulder straps
PS 004
Ref. no.: PS 002
Multi-purpose padding for shoulder strap Ref. no.: PS 004
Padding for shoulder straps on full body harness. Made of fabric-coated neoprene foam. Improves comfort when working in full body harness, and helps reduce constriction caused by the shoulder straps. Facilitates wearing of full body harness. Can be used with all types of full body harnesses manufactured by PROTEKT.
Multi-purpose pad for full body harness. Made of leather and fabric coated neoprene foam. Improves comfort when working in full body harness, and helps reduce constriction caused by the straps. Can be used with all types of full body harnesses manufactured by PROTEKT. The padding protects harness straps against damage.
REF. NO.:
REF. NO.:
PS 002
PS 004
Additional accessories
16
61
ADDITIONAL ACCESSORIES
16
PS 040
NEW
Shoulder padding Ref. no.: PS 040
16 ADDITIONAL ACCESSORIES
Light shoulder padding PS 040 intended for cooperation with WR 040 Double. The device ensures comfortable and safe work. PARAMETERS
Material:
polyester, PVC
Weight:
250 g
REF. NO.:
PS 040
62
16
Additional accessories
WWW.PROTEKT.COM.PL
PE 010
Elastic belt Ref. no.: PE 010
Elastic belt designed for: • •
heavy duty machine operators and lorry drivers; workers who carry loads.
PARAMETERS
SIZE
WAIST
M
86 cm
L
86-96 cm
XL
96-108 cm
XXL
108-128 cm
REF. NO.:
PE010
Straps for heavy load handling Ref. no.: AP 300
16 ADDITIONAL ACCESSORIES
AP 300
Straps for lifting heavy objects, such as furniture, chests, barrels, machine parts. Thanks to the strap design the load can be distributed evenly so that the user’s spine is not overloaded. Kit for two users.
REF. NO.:
AP300
Additional accessories
16
63
AP 303
Belts for carrying heavy things (objects).
Set contains 2 pieces of each component.
AP 303 are new comfortable belts for carrying heavy items such as furniture, boxes, barrels or machine parts. The design of the belts allows the simultaneous distribution of the load on the employeeâ&#x20AC;&#x2122;s spine. AP 303 belts are equipped with automatic buckles that connect shoulder belts with adjustable belts.
ADDITIONAL ACCESSORIES
16
PARAMETERS
Material:
polyester, PVC
Weight:
max. 3 m
REF. NO.:
AP 303
64
16
Additional accessories
WWW.PROTEKT.COM.PL
TU 350 is a specifically-designed light cone wedge for use on the ground and on trees. It is intended for small and medium-sized trees. After a cut is made in the tree, the cone wedge is inserted which makes it easier to release the cut saw guide or enables to control tree tilting. The cone wedge may be turned using a ratchet spanner, impact gun or a hightorque drill driver equipped with a 1/2â&#x20AC;&#x2122;â&#x20AC;&#x2122; squared pin. The cone wedge is made of thermally-hardened steel and its surface is protected by thermal and chemical processing (black oxide treatment). It is easy to fasten to a harness using a flexible rope.
Cone wedge
PARAMETERS
16 Material:
thermally tempered steel
Weight of the set:
642 g (cone wedge and rope)
Dimensions of the cone:
170 x 35 mm
Dimensions of the cone:
35 mm
The length of the cable:
130 cm (expanded)
ADDITIONAL ACCESSORIES
TU 350
REF. NO.:
TU 350
Additional accessories
16
65
Cone wedge
16
PARAMETERS
ADDITIONAL ACCESSORIES
TU 360
Material:
high-stroke thermal-plasticst
Weight:
46 g
Dimensions:
93 x 49 x 18 mm
Available colours:
yellow / black
TU 360 is a pocket-size wooden wedge, made of durable plastics, helps to release the jammed saw guide without the risk of damaging the chain, even in case of contact with it. Compact size and low weight allows to use both on the ground and on the tree. large, central hole allows for attaching the wedge to the harness by means of majority of holders of tools and carabineers.
REF. NO.:
TU 360
66
16
Additional accessories
WWW.PROTEKT.COM.PL
AY 080
NEW
Line throwing weight Ref. no.: AY 080
PARAMETERS
220 g, 280 g, 340 g, 400 g, 460 g
Material:
steel, lead, polyester
REF. NO.:
WEIGHT
AY 080 220
220 g
AY 080 280
280 g
AY 080 340
340 g
AY 080 400
400 g
AY 080 460
460 g
Line throwing weight Ref. no.: AY 081
PARAMETERS
Weight:
220 g, 280 g, 340 g, 400 g, 460 g
Material:
steel, lead, reinforced PVC
16
REF. NO.:
WEIGHT
AY 081 220
220 g
AY 081 280
280 g
AY 081 340
340 g
AY 081 400
400 g
AY 081 460
460 g
Additional accessories
ADDITIONAL ACCESSORIES
AY 081
Weight:
16
67
AY 082
Line throwing weight Ref. no.: AY 082
PARAMETERS
AY 083
Weight:
220 g, 280 g, 340 g, 400 g, 460 g
Material:
steel, lead, synthetic leather, polyester
REF. NO.:
WEIGHT
AY 082 220
220 g
AY 082 280
280 g
AY 082 340
340 g
AY 082 400
400 g
AY 082 460
460 g
Line throwing weight Ref. no.: AY 083
PARAMETERS
ADDITIONAL ACCESSORIES
16
350 g AY 083 350 orange
68
16
450 g AY 083 450
Additional accessories
red
250 g AY 083 250 blue
Dimensions:
127 x 52 mm
Weight:
250 g, 350 g, 450 g
Material:
rubber, stainless steel
Breaking strength:
500kg of holder per rope
REF. NO.:
WEIGHT
AY 083 250
250 g
AY 083 350
350 g
AY 083 450
450 g
WWW.PROTEKT.COM.PL
AY 300
Tool holder
APPLICATION EXAMPLE AY 300 is a belt tool holder mounted with a burr to the belt or tapes or harness or safety belts. It facilitates optimum placement of tools to improve the work comfort. AY 300 allows for connecting a tool line, for example.
16
Material:
pipe polyester tape plastic holder
Diameter of the tape:
40 mm
Max. load:
2 kg
ADDITIONAL ACCESSORIES
PARAMETERS
REF. NO.:
AY 300
Additional accessories
16
69
AY 301
Tool holder
APPLICATION EXAMPLE
AY 301 is a belt tool holder mounted with a burr to the belt or tapes or harness or safety belts. It facilitates optimum placement of tools to improve the work comfort. AY 301 allows for connecting a tool line, for example.
16 ADDITIONAL ACCESSORIES
PARAMETERS
Material:
rolex polyester tape steel holder
Diameter of the tape:
40 mm
Max. load:
2 kg
REF. NO.:
AY 301
70
16
Additional accessories
WWW.PROTEKT.COM.PL
TU 325, TU 326
NEW
Anchors Ref. no.: TU 325, TU 326
PARAMETERS
Material:
TU 325
TU 326
anchor small
anchor large
powder coated steel
REF. NO.:
TU 325 TU 326
Arborist girdle
TU 501
Ref. no.: AZ 500
Ref. no.: AZ 501
PARAMETERS
PARAMETERS
Length:
90, 100, 120 cm (other possible)
Length:
Static strength:
â&#x2030;¥ 25 kN
Static strength:
Arborist girdle
16 ADDITIONAL ACCESSORIES
TU 500
40, 60, 80, 100, 120, 140, 170 cm (other possible) 18 kN
NR KAT.:
LENGTH:
NR KAT.:
LENGTH:
AZ 500 090
90 cm
AZ 501 040
40 cm
AZ 500 100
100 cm
AZ 501 080
80 cm
AZ 500 120
120 cm
AZ 501 120
120 cm
Additional accessories
16
71
RS 220
Arborist’s trolley Ref. no.: RS 220
PARAMETERS
Load capacity:
max 500 kg
Length:
783 - 1683 mm
Arborist’s trolley is a multi-functional solution for timber transport. It has been proven both in forest sites and in a homestead garden. It is an excellent solution for transporting materials in the back yard with difficult access. It accelerates transport ensuring high labour culture.
Height:
892 mm
REF. NO.:
Width:
855 - 1020 mm
RS 220
RS 221
Arborist’s trolley Ref. no.: RS 221
16 ADDITIONAL ACCESSORIES
RS 221 W
bag installed on arborist’s trolley, made from plawil 6mm
PARAMETERS
Load capacity:
max 500 kg
Length:
1760 - 2230 mm
REF. NO.:
Height:
1135 mm
RS 221
Width:
800 - 935 mm
RS 221 W - bag for trolley
72
16
Additional accessories
WWW.PROTEKT.COM.PL
WP 011, W 012, W 013
Blowers Ref. no.: WP 011, WP 012, WP 013
WP 011
WP 012
WP 013
Power supply:
230-250 V
230-250 V
230-250 V
Frequency:
50-60 Hz
50-60 Hz
50-60 Hz
Motor power:
185 W
245 W
745 W
Airflow capacity:
1300 m3/h
1450 m3/h
3500 m3/h
Sound pressure:
80 dB
74 dB
85 dB
Weight:
8,10 kg
8 kg
14,75 kg
Dimensions (H x L x W):
47 x 38,10 x 31,75 cm
36 x 33 x 30 cm
53,30 x 43,15 x 35,55 cm
connector coupler WP 310, WP 330 Duct for blower WP 410, WP 430 Duct for blower Ref. no.: WP 310, WP 330
Ref. no.: WP 410, WP 430
ADDITIONAL ACCESSORIES
16 PARAMETERS
WP 310
diameter 20cm
WP 330
diameter 29cm
REF. NO.:
REF. NO.:
WP 310 for blower WP-011
WP 410 for blower WP-011
WP 330 for blower WP-013
WP 430 for blower WP-013
76
16
Additional accessories
WWW.PROTEKT.COM.PL
WP 110, WP 130
Duct for blower
WP 200
Container with duct for blower WP 012
Ref. no.: WP 110, WP 130
Ref. no.: WP 200
PARAMETERS
PARAMETERS
WP 110
diameter 20 cm
WP 130
diameter 29 cm
WP 200 04
WP 200 07
Weight:
5,30 kg
10,30 kg
Dimensions:
36 x 58 x 30 cm
36 x 82 x 30 cm
Duct diameter:
20 cm
25 cm
REF. NO.:
MAX LENGTH
WP 110 04 for blower WP-011
4,0 m
WP 110 07 for blower WP-011
7,0 m
REF. NO.:
MAX DUCT LENGTH
WP 130 04 for blower WP-013
4,0 m
WP 200 04
4,0 m
WP 130 07 for blower WP-013
7,0 m
WP 200 07
7,0 m
WP 212
Complete ventilation set
TI 010
Ref. no.: WP 212
Labels on obligation to use full body harness Ref. no.: TI 010
NEW PARAMETERS
WP 212 07
Duct diameter:
20 cm
25 cm
Airflow capacity:
1200 m3/h
1200 m3/h
Weight:
13,30 kg
18,30 kg
Dimensions:
36 x 80 x 30 cm
36 x 105 x 30 cm
PARAMETERS
Dimensions:
250 x 330 mm
Material:
foamed PVC 3mm
REF. NO.:
MAX DUCT LENGTH
WP 212 04
4,0 m
REF. NO.:
DIMENSIONS
WP 212 07
7,0 m
TI 010
250 x 330 mm
Additional accessories
16 ADDITIONAL ACCESSORIES
WP 212 04
Information label available in 4 language versions: Polish, English, German and Russian.
16
77
MANUFACTURER OF FALL PROTECTION EQUIPMENT