CompositeXT®

Appendix

CompositeXT® General

Length

Items

Specifications Exterior 53’ 0” (on one line) Interior 52’ 6”

Width

Exterior 102.36” Interior 101.50" (above side scuff, wall to wall)

Height

Exterior 13’ 6” Interior 110” (front to back) Weight capacity 68,000 GVWR Interior volume 4,095 cu. ft.

Door opening

Height 110” Width 99”

Tare weight 13,850 lbs AIAG floor rating 18,000 lbs

Body Structure

Items Specifications

Side sheets

Composite panel (0.25") with pre-painted white, high-tensile galvanized steel inner and outer sheets Side stiffeners High-tensile galvanized steel (19GA) on 48" centers

Roof

• Full width aluminum sheet (0.04" thick) • Tension leveled prior to installation Roof bows Galvanized steel (16GA) anti-snag on 24" centers

Front wall

Four high-tensile, hat-shaped, posts securely fastened with 6 heavy-duty fasteners covered with aluminum front sheets (0.05")

Rear frame

• Hot-dip galvanized (0.19" thick), high-tensile steel construction with low profile header and tube shaped posts • Forged steel angle irons in top corners for added rack resistance. • Lights recessed in the rear sill with heavy-duty protection bars Rear doors Swing door with a composite panel

Interior lining

Exterior grade plywood (0.5") installed lower half of front wall and 0.25" over top height of front wall

Side scuffband

• Exposed height extended scuff (16") • Exterior ribs for increased stiffness and scrape resistance