THE EXPOSURE TRIANGLE EXPLAINED

For amateur photographers, the interaction between aperture, shutter speed and ISO can be perplexing. This article clarifies these concepts and allows individuals who are new to photography to grasp a basic understanding of them— particularly when concerning ISO. As a disclaimer, this article simplifies certain aspects of the exposure triangle in order for beginner-level comprehension. The articles explains why it is important for budding photographers to understand the nuances of aperture, shutter speed, and ISO, by talking about the relationships between them known commonly as the exposure triangle.

The exposure of a photograph is made by allowing light to hit the camera’s sensor and record an image. Exposure is controlled by three variables: aperture, shutter speed, and ISO. Here, we’re going to explain how a model called the exposure triangle can be used to help you understand the balance of all three.

Whether you’re using a mirrorless camera or one of the best film cameras, the three elements of exposure are the same.

The size of the aperture determines how much light is let in through the lens, while the shutter speed dictates the duration of the sensor’s exposure to the light. ISO settings determine the camera sensor’s sensitivity to light. ISO enables you to use the best combo of aperture and shutter speed when the amount of light available to make an exposure would otherwise prevent it. But, upping the ISO risks reducing the quality of your shots.

The aperture is a key ingredient for controlling the depth of field, or how much of an image appears sharp. You need to understand f/stops to know how to change the aperture appropriately.

Shutter speed stops also take some practice to understand, but in very general terms, you want a fast shutter speed for moving subjects like animals, sports, kids, and a slow shutter for low-light conditions or creative effects like long-exposure flash photography.

You must understand the relationship between these variables, as each decision you make in terms of aperture, shutter speed, and ISO will affect the look and feel of a picture, as well as its brightness.

This is where the exposure triangle comes in. The key is that when you increase the exposure for one variable (a green arrow), you need to decrease it for one or both of the other variables.

The exposure triangle explained

Exposure is essentially a juggling act between aperture, shutter speed and ISO. If you increase one of the three variables, then one or both of the other settings will need to decrease by an equivalent to maintain the same level of exposure.

Exposure can be measured in ‘stops’, with each stop representing double or half the level of exposure of the adjacent stop. If you increase the exposure by one stop, the sensor will receive twice the level of exposure.

Decrease it by one stop, and the exposure is halved.

Aperture, shutter speed, and ISO can each be described in stops. So, a shutter speed of 1/50 sec is one stop brighter than 1/100 sec, as the sensor is exposed for twice as long. But the same 1/50 sec speed is one stop darker than 1/25 sec. ISO is just as clear. Low numbers are less sensitive, higher numbers are more. A sensitivity of ISO400 is one stop brighter than ISO200.

The ranges of apertures on a lens are similar – opening up the aperture by one stop gives twice the level of exposure, while closing it by one reduces the exposure by half – but the sequence is less obvious. Larger f-numbers represent smaller apertures, while smaller f-numbers give larger apertures – just try thinking of them as fractions: a 1/16th is smaller than a 1/4.