Home improvement tips

Laminate Flooring In Five Steps!

Laminate is attractive for a few reasons. It is just a good tight floor that requires minimal maintenance. Laminate flooring is normally durable and in comparison with other types of flooring not costly. If you're following theses steps carefully, it is possible to setup any flooring straight away on your own. A fairly nice activity job for two individuals to undertake.

What do I need?

- Laminate - Underfloor + joining tape - Skirtings - Mitre Saw / Jig Saw - Tapeline - Hammer - Spacers - Pencil - Square

Step 1

Prepare everything you have obtained for the project to start out. The ground where one must place the laminate ought to be completely flat and free of dirt and dust.

Step 2

Then you may start with the actual sub floor. This is basically the sound, humidity and heat insulation. There are numerous types of flooring on the market. Make sure when choosing your sub floor to select the one that fits your floor the best. When rolling out the sub floor. Simply place the underlay along with joining tape together.

Step 3

Now you can begin at one corner, between the walls and the laminate place spacers an 8mm apart around the room between the wall and the laminate. This help the laminate to expand against the wall in hot and cold climates. First, place a whole sheet of flooring. After that you can work the room. Hold the plank in a angle of about forty-five degrees and tap the boards together using a rubber hammer and off cut of laminate to ensure you don’t ruin the tung or grove of the next board. I recommend using a dremel tool to cut out spaces under skirting that is surrounding doors to get a seamless finish if your leaving the original skirting in place

Step 4

When the laminate is completed , you may start the skirting to hide the 8mm. You can find a variety of skirting for sale at places like B and Q. The simplest to use is the bull nosed variety. This can be a good choice seeing as there are absolutely no fancy edges to cut. Cut the skirting boards inside a corner with a miter saw at forty-five degrees. This way you will get good, tight edges.

Step 5

Your floor is ready! Thoroughly clean the surface with a lightweight. Wet cloth. Not too wet, because laminate are not able to endure that. Be careful while positioning the furniture. Putting them on laminate (specially with the cheaper ones) can quickly get them scratched. The best you can do is ensure the bottom part of the legs is properly flat.

WINDOWS | DOORS | ROOFLIGHTS

www.pinterest.co.uk/crystalclearbristol www.facebook.com/crystalclearbristol

Aluminium, Timber, PVCu, Windows, Doors & Rooflights

Plan your dream home

Visit Bristol’s Biggest Showroom 24 Emery Road Brislington, Bristol BS4 5PF To find out more, call 01179 717 880 or visit www.crystalclearbristol.co.uk

in partnership with North Somerset Council