Engineering Review - April 2016 by Divya Media Publications Pvt. Ltd.

Omira Engineered Products â&#x20AC;&#x201C; A PHILLIPS CORP Group Company

Volume 15 No. 12 | April 2016 | ` 200 | www.engrreview.com RNI No. MAHENG/2004/15135

EDITORIAL INDEX Executive Publisher : Shilpa Kadam CEO : Shekhar Dongre

Editor : Rajeev lyer

Aditron India

CMO: Shirish Dongre Advisory Board (Editorial) Mr. T. P. Singh : Director, Flir Systems India Pvt. Ltd. Mr. Vijay Pimparkar: Ex-General Manager, Godrej & Boyce Mfg. Co. Ltd. Mr. Gautam Kulkarni : CEO, Hafi Electra Pvt. Ltd. Mr. Ashok Sheth : Chairman, Solitaire Machine Tools Ltd. Prof. R. Sreedaran : Faculty, Atharva College of Engineering Mr. Ravin Mehta : Managing Director, Neel Controls/Neel Industrial Systems Pvt. Ltd. Mr. C. S. Limaye : Director, Supertech Instrumentation Services India Pvt. Ltd. Mr. S. A. Mohan: Chief Executive Officer, Maini Materials Movement Pvt. Ltd. Mr. Rajesh Ballamwar : Director, Prolific Systems & Technologies Pvt. Ltd. Mr. P.K. Balasubbramaniian: President, VBS Corporate Support Marketing Team : Ladoji Pendurkar, Amol Powle, Bhavin Shah, Bharat Shah, A.Purohit, Vinod Surve, Kavita Chaudhari Designer & Layout Arun P. Shinde, Nandan Moghe, Dinesh S. Gawade Online Division Ganesh M., Pradeep M. Pillalamarri

KASTO Maschinenbau

158

KSB Group

170

Ador Welding

78, 156

Advantech

B Beckhoff

BEUMER Group

Bharat Fritz Werner (BFW)

D Dormer Pramet

SOUTH (Chennai & Coimbatore) : Y. V. Raghu : 09566141224 Bangalore - Vaman : 09686721340 Kochi - Sanjeev Nair : 09846249568 EAST (Kolkata & Other regions) : S. Roy - 09433097806 WEST (Maharashtra & Gujarat) : Pune - S. Kadam - 09833373371 Gujarat - Dinesh Shah - 09327344559 Rajkot (Saurashtra) - Swapnil Bhatia: 09227909005 https://www.facebook.com/engrreview https://twitter.com/engrreview http://in.linkedin.com/pub/engineering-review/87/b31/97a

ENGINEERING REVIEW Overseas Offices

M Mastercam

48, 50

Meco Instruments

157

Mercom Capital Group

163

Mitsubishi Electric

165

Elecon Measurements

157

Essel Group

ET Edge

Exor India

158

Omron Automation

NEC India

Nord Drivesystems

118, 155

PC|SCHEMATIC

126

Geissel India

122

R. STAHL’s

166

GF Piping Systems

171

Red Lion

Renishaw

94, 52

H Haas Automation

44, 102

Rollon India

108

Hangsterfer’s

155

Rutronik

Hanna Instruments

HARTING

6, 100, 158

Shavo Technologies

Softing Industrial Automation

Sterling and Wilson

167

Suzlon Group

164

Heidenhain India

Hitachi Industry & Control Solutions

HMS Industrial Networks

Honeywell Process Solutions

T Toradex

18 162

IEEMA

165

Tulex Industrial Tools

USA Nancy TARTAGLIONE, Mepax USA Email: n.tartaglione@mepax.com usa@mepax.com

GERMANY Sebastian OLLIER Mepax Deutschland, Tel: +49 711 222 54 456, Email: deutschland@mepax.com

Igus GmbH

Imaginarium

ValvTechnologies

In ORBIT Tours

FRANCE MEPAX SA, Romain CLASS Tel.: +33 1 39 02 77 78, FRANCE

SPAIN Sofiane JEDIDI Mepax España Tel : +34 963 255 886, Email: spain@mepax.com

India tools & Instruments

160

InnoVista Sensors

156

ITALY Valeria VILLANI Tel.: +39 339 8610117, Via Firenze, Milano, Italia

UK Liz Jones Tel: +44 (0)1227 276016 , Email: l.jones@mepax.com

Instamod Airpipe

124

INTORQ

RUSSIA Garri ZALTS Mepax Russia Tel: +7 495 576-7666 / Email: gizalec@yandex.ru

CHINA/South Korea/Taiwan Mepax - Konaxis Shanghai Julien PENARD Tel : (+86) 21 6252 2731 Email: china@mepax.com

APRIL 2016

ENGINEERING REVIEW

Branch Offices (Zonal): NORTH (Delhi & NCR regions) : Sandesh Jain : 09810837877 / 09871602777

Legris India

FLIR Systems

Head Office : Divya Media Publications Pvt. Ltd., 3rd Floor, Harmony Tower, N.S. Road, Thane-400 602. Maharashtra Tel: +91 22-25380574/75, Telefax: +91-22-25418254 E-mail: shekhar@divyamediaonline.com Website: www.engrreview.com

168, 172

Effica Automation

Circulation Executive Satish Kadam, Amol Ranshur

Lapp India

W Walchandnagar Industries

Warpp Engineers

159

Welspun Renewables

164

K Kabelschlepp India

171

160

Zenith Industrial Products

159

www.engrreview.com

Regenerative Converter D1000 3.7 to 560 kW Looking for a fully regenerative and/or clean power solution for your multi-drive or single drive system? Look no further. D1000 is your answer. Unlike passive rectifiers which can only supply power from source to load, the D1000 is capable of delivering power in both directions, and is most beneficial to supply multi-drive or single drive common bus systems that experience significant regeneration. Additionally, the D1000 system includes input harmonic filtering, achieving low distortion levels and improved power factor, which further reduces energy costs and stress on power systems. This clean power solution is achieved without the use of expensive multi-pulse components. Conventional System 18-Pulse Rectifier

Active Rectifier System Brake Transistor Unit DC Supply for Inverter Loads

Harmonic Filter Module

D1000 DC Supply for Inverter Loads AC Reactor

18-Pulse Transformer

Brake Resistor Unit (wasted energy)

Highlights • Compatible with all conventional drives having full power access to DC bus • Overload capability of 150% for 30 seconds, 200% for 3 seconds • 0.99 True Power Factor at full load • Ability to compensate for low voltage (boost function) • Overcurrent and Overheat Protection

• 480 V POWER RANGE 3.7 to 560kW • AMBIENT OPERATING TEMP -10°C to 50°C (OPEN TYPE IP00) • CERTIFICATIONS UL, CE, RoHS, CSA B44.1 • STANDARD I/O (8) Digital Inputs (3) Analog Inputs (4) Relay Outputs (2) Analog Outputs • STANDARD COMMUNICATIONS Modbus RTU • CONTROL OPTIONS EtherNet/IP Modbus TCP/IP DeviceNet Proﬁbus DP Proﬁnet • MECHANICAL OPTIONS External Heatsink Kit

Typical Applications • Centrifuges • Paper winders • Film winders • Sawmill systems • Test stands

YASKAWA India Pvt. Ltd.

17/A, 2nd Main, Electronic city, Phase 1, Hosur Road, Bangalore 560 100 Tel: 080 4244 1900, Email: info@yaskawa.in / sales@yaskawa.in / service@yaskawa.in www.yaskawaindia.in

BUSINESS NEWS

IPTEX-16 / GRINDEX 16 in Mumbai help power transmission & grind finishing industries to showcase the latest technology trends

Mr. Naveen Sahni, GM-Gears & Services, Timken India Ltd. presents a paper on ‘Gear Refurbishing’ at the Seminar IPTEX - 2016 The 4th International Power Transmission Expo (A Gear Engineering event) was held in Bombay Exhibition Centre, Mumbai, from 3rd to 5th March 2016. This expo was held along with GRINDEX 2016The 2nd International Grinding and Surface Finishing Technology Expo. “These concurrent exhibitions were designed to benefit the visitors coming from various industry sectors to witness both Gear Engineering products along with Grinding and surface finishing products under one roof.,” said Mr. Raghu, Director, Virgo Communication s & Exhibitions P. Ltd who organized the Show. There were 75 exhibitors in the Show, both Indian and overseas combined. The key participants included Gleason, Timken, Shanthi Gears, Bonfiglioli, 3M, Beijing Gears,

ENGINEERING REVIEW

APRIL 2016

Electronica Hi Tech Machine Tools, Energetica, Hitachi, Klingelnberg, KTR Couplings, Liebherr, Francis Klein, :Luoyang Hong, Mahr Technologies, Marposs, Pragati Transmission, Premier, Ringfeder, Rossi Gear, Supreme Industrial Works, Ucam, Universal Technologies and Wenzel South Asia just to mention a few. The 2-day Seminar held on

3rd and 4TH March at the same venue added depth to the technology event. A number of interesting papers were presented by experts from the industry. These covered various aspects of design, manufacture, quality control and finishing operations. Among the overseas papers, the ones on ‘Advances in Surface Finishing Technologies’

by Mr. N.P. Yerriboina of Micro Chemical Korea; ‘The full scope of continuous generating gear grnding’ by Mr,Walter Graf, Reishauer A.G., Switzerland, and Modern Trends in Condition Monitoring of Gearboxes’ by Mr. Dieniel Lim, NGC Transmission, Singapore were notable. In the words of one of the key participants, “The event was well conceived. It allowed the leading Power Transmission companies to showcase their products and services. Also it was a good platform for networking among industry professionals. Asked what was the highlight of their show, this is what Timken said: We showcased Timken’s products and services portfolio for the transmission industry. Our Raipur capability for refurbishment of gearboxes was appreciated by industry professionals. Our General Manager-Gears & Services, Mr. Naveen Sahni also presented a paper on ‘Modern Technologies for Upgrading & Refurbishing Gears’ at the seminar which was very well received.” Indeed, both these complementing events provided an excellent platform for the participants to showcase innovative products, meet prospective customers, assess market potential, understand competition and identify new partners for networking for the benefit of all. - P.K. Balasubbramanian

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

Geneva Motor Show : HARTING’s rapid charging technology celebrates premiere HARTING’s rapid charging technology is celebrating its premiere at the Geneva Motor Show ( 3 to 13th March 2016) on Rinspeed AG’s exhibition stand (hall 6.240). Rinspeed’s latest “Etos” concept car is a spectacular application. The industrial connectivity specialist HARTING has been manufacturing innovative products and solutions for e-mobility for several years based on decades of experience in connection and transmission technology for data, signal and power. HARTING Automotive is developing and producing charging equipment for electric and plug-in hybrid vehicles. These include mode 2 charging cables, mode 3 charging cables and DC rapid charging plugs with approval and certification for all specific markets and

HARTING is displaying the DC rapid charging plug combo type 2 at the Geneva Motor Show amongst other solutions. which meet legal requirements worldwide. Customers can deploy the equipment in line with their own individual requirements as the HARTING vehicle charging cables are available in all three plug system versions used worldwide (with the corresponding approvals) for the common AC charging interfaces. The type 1 plug is certified for AC in accordance with UL, CE and JET/PSE, and the type 2 plug for AC in accordance with UL/

HARTING is also exhibiting the mode 2 charging cable.

HARTING will be presenting products such as Type 2 AC plug.

VDE. The HARTING GB China plug complies with the CQC standard. HARTING Automotive is currently reporting growing demand worldwide for e-mobility solutions. “Demand for such solutions remains high,” confirmed Marco Grinblats, Business Unit Manager E-Mobility at HARTING Automotive. The field of e-mobility is therefore becoming ever more important to HARTING as Grinblats predicts that automotive manufacturers will increasingly

roll out plug-in hybrid vehicles on the market over the coming years. “To achieve their CO2 balance alone, automotive manufacturers will be launching many more such cars,” Grinblats firmly believes. In order to meet the rising demand, the HARTING Technology Group is currently investing in the expansion of production in Sibiu in Romania, Silao in Mexico and Zhuhai in China. For more information Web: www.HARTING.com

Red Lion Names Daniel Gao Vice President of Sales for Asia Pacific Red Lion Controls, the global experts in communication, monitoring and control for industrial automation and networking announced the appointment of Daniel Gao as Vice President of Sales for Asia Pacific (APAC). Based in Shanghai, Daniel reports directly to Red Lion President Mike Granby and serves on the executive team. Prior to Red Lion, Daniel served as a Sales and Marketing Director for TE Connectivity Shanghai. Earlier in his career, he also held executive sales positions at Honeywell

ENGINEERING REVIEW

APRIL 2016

Mr. Daniel Gao, Vice President Red Lion Controls Sensing and Controls, Vishay Transducer, Rohde and Schwartz, Compuwave Technologies and Spirax Sarco Engineering. “Daniel is an experienced international executive with a

strong track record of sales in China and throughout Asia,” said Granby. “As the Industrial Internet of Things continues to grow in Asia, Daniel will play an important role in driving sales of Red Lion’s industrial automation and networking products in the region and helping establish our position as a global IIoT provider.” Daniel has a Bachelor Degree in Mathematics and Statistics from Zhongshan University and a Master Degree in Computing from the University of Bradford. “It is an honor to join an industry leader like Red Lion,

who follows a customer-first philosophy and has been serving industrial customers and partners for over 40 years,” commented Gao. “The IIoT presents a unique opportunity for Red Lion and for our customers, and I look forward to growing the business in Asia and enhancing our leadership position in the automation and networking markets.”

For more information Web: www.redlion.net

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

Advantech, ARM, Bosch Sensortec, Sensirion, and Texas Instruments Cooperate for the M2.COM IoT Sensor Platform Advantech (Taipei:2395), along with ARM, Bosch Sensortec, Sensirion and Texas Instruments (TI) announced the collaboration of a new Internet of Things (IoT) sensor platform called M2.COM; to be unveiled at Embedded World 2016. The IoT era brings new opportunities to traditional industries and drives business evolution for the next-generation of products and services. To enable a diverse range of IoT applications, and to standardize different platforms and technologies, an open platform for IoT sensors and sensor nodes was established by sensor makers and module makers for more efficient IoT development. By joining M2.COM, participants will define and drive the leading platform to empower the Internet of Things. Miller Chang, VP of Advantech Embedded Computing Group said, “Data collection will be one of the main challenges for IoT. Sensors, wireless technology, and embedded computing will be the three major core abilities for data acquisition, and that’s the reason Advantech worked closely with industrial partners to define the M2.COM open standard. With this standardization, we envision M2.COM will accelerate IoT sensor device deployment.” “A standards-based industrial computing and sensor format is key to fulfil the changing demands of the IoT market,”

ENGINEERING REVIEW

APRIL 2016

accelerate the practice of smart city and IoT solutions, and in the spirit of “Partnering for Smart City and IoT Solutions” it will continue to collaborate with worldwide partners. Through Advantech, ARM, Bosch Sensortec, Sensirion and TI’s joint promotion, we believe the M2.COM will realize more IoT sensing possibilities and accelerate the practice of smart city and IoT solutions. said Zach Shelby, vice president of marketing, IoT business, ARM. “The ARM® mbed™ OS provides the perfect foundation for this new format, supporting the needed communication protocols and formats to securely and easily integrate M2.COM based sensor devices with IoT cloud applications.” “One of the key challenges hindering a fast growth of sensor enabled devices in IoT relevant markets today is the lack of widely adopted open Platform” said Jeanne Forget, VP Marketing of Bosch Sensortec. “For Bosch Sensortec as the leader in MEMS and other sensor technologies it’s therefore essential to actively participate in developing open platforms like the M2.COM. We believe that through the collaboration of these competent partners the M2.COM open platform will become a strong driver for sensors in IoT markets.” “Collecting Data and creating wonderfully smart systems and devices will only move the IoT forward if those things are able

to interoperate or communicate with one another. Therefore we are proud and convinced, that we are doing the right thing by defining a standard -M2.COM to simplify the integration of sensors IoT development” says Pascal Gerner, Director Product Management of Sensirion. “In order to accelerate the change and new business opportunities created by the IoT, it’s important to have a platform that saves development time and cost with a with standardized sensor interface, like M2.COM, where developers can connect anything anywhere,” said Olivier Monnier, marketing director wireless connectivity solutions/IoT, Texas Instruments. “By leveraging TI’s low-power SimpleLink™ Wi-Fi® CC3200 wireless microcontroller, M2.COM IoT developers have access to award-winning hardware that will enable them to get their design to market quickly and easily.” Advantech reinforces its vision of “Enabling an Intelligent Planet’ in order to

About Advantech Founded in 1983, Advantech is a leader in providing trusted, innovative products, services, and solutions. Advantech offers comprehensive system integration, hardware, software, customer-centric design services, embedded systems, automation products, and global logistics support. We cooperate closely with our partners to help provide complete solutions for a wide array of applications across a diverse range of industries. Our mission is to enable an intelligent planet with Automation and Embedded Computing products and solutions that empower the development of smarter working and living. With Advantech, there is no limit to the applications and innovations our products make possible.

For more information www.advantech.com

www.engrreview.com

Contents PROFILE

Vol 15 | Issue 12 | April 2016

COVER STORY

Legris India: Innovation in connexions

INTORQ : The brand of reliability

Mr. Joy Dewan, National Manager-Transair, Legris India

NEC India : The technology expertise

VIEWPOINT

Union Budget 16-17 Industry Reacts

FACE TO FACE

64 We always seek out new technologies and applications to provide tailor-made solutions to the customer: Rushil Shah

“Resolve of the Govt. to ease the process of ‘doing business in India’ is apparent.”

Mr. Rushil Shah, Managing Director, Shavo Technologies Pvt. Ltd.

3D Printing is unfolding the future of manufacturing industry Mr. Guruprasad Rao Director, Technology & Operations, Imaginarium (India) Pvt. Ltd.

TECH TRENDS

Robotics in machine tending

TNC 640 with new features

126

“Addresses all major sectors of our economy”

CASE STUDY

Mr. Arjun Prakash- Managing Director Effica Automation Ltd.

Primo™ twin probe system : A revolutionary product

BUSINESS AVENUES .....147

FOR ADVERTISING ENQUIRY CONTACT : E-mail: shekhar@divyamediaonline.com

Time saving electrical CAD software Mr. Ove Larsen, International Sales Director, PC|SCHEMATIC A/s, Denmark

PRODUCT SHOWCASE .....155

BUSINESS NEWS .....04

www.engrreview.com

All rights reserved. No part of this magazine may be reproduced in any form without the permission of the Editor. ENGINEERING REVIEW is owned, printed & published by Shilpa Kadam, published from 3rd Floor, Harmony Tower, Netaji Subhash Road, Court Naka, Thane (W) Thane-400 602 Tel: +91 22-25380574/75 Telefax: +91-22-25418254, Editor : Rajeev lyer. Important : Whilst care is taken prior to acceptance of advertising copy, it is not possible to verify its contents. ENGINEERING REVIEW can not be held responsible for such contents, nor if any losses or damages incurred as a result of transactions with companies, association or individuals advertising in the publications. Articles, interviews published in ENGINEERING REVIEW are the personal vie-ws and expressions of its authors. ENGINEERING REVIEW does not necessarily agree to it. ENGINEERING REVIEW can not be held res-ponsible for such articles / interviews. We therefore recommend that readers make necessary enquiries before sending any money or entering into any agreements with advertisers or otherwise act-ing on an advertisement in any matter whatsoever.

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

ENGINEERING REVIEW |

13 | April 2016

Contents AUTOMATION

Vol 15 | Issue 12 | April 2016

ENGINEERING

BUSINESS NEWS

Geneva Motor Show : HARTING’s rapid charging technology celebrates premiere

Hanna Instruments, Inc. Introduces HI902C Titration System with Password Protection

Red Lion Names Daniel Gao Vice President of Sales for Asia Pacific

Advantech, ARM, Bosch Sensortec, Sensirion, and Texas Instruments Cooperate for the M2.COM IoT Sensor Platform

Pankaj Thapliyal joins as President of Smart Utilities, part of Essel Group

Hitachi Industry & Control begins sales of ADSTEFAN Ver. 2016” Casting simulation system in India

New “Edge Gateways” from HMS enable communication between IT-systems and the factory floor

Honeywell & Palo Alto Networks team to protect industrial control systems from cyber attacks

“After sales runs the market in India”

Omron unveils first-of- its-kind ‘Total Tamper Detection Solution’ to address power theft

Experience ‘Integrated Industry’ now: With ready-to-use products for IoT & Industrie 4.0 from Beckhoff

Rutronik opens new warehouse & logistics Center in Austin, Texas

TECH TRENDS 98

27 times more reliable: igus offers the largest selection of ethernet cables for moving applications

100 Increasing demand for embedded and “Customised Solutions” from HARTING

MACHINE TOOLS

POWER BUSINESS NEWS 163 Solar installations in India to Double in 2016 with more than 4 GW, Reports Mercom Capital Group 164 Suzlon wins order of 71.40MW from Gujarat Industries Power Company Ltd. 164 Welspun Renewables’ Builds-up its investments in Punjab, Expands Solar Portfolio 165 IEEMA welcomes Government’s intent for balanced & inclusive growth 165 Mitsubishi Electric to exhibit at ACREX 2016 166 EXLUX linear luminaires from R. STAHL: Latest lighting technology in tried-and-tested fitting 167 Sterling and Wilson solar division opens office in Lagos, Nigeria continuing its aggressive Africa expansion strategy 168 Lapp India Receives ISO 14001: 2004 Certification TECH TRENDS 118 Swiss solar panel specialist relies on FLIR thermal imaging camera to perform fail-proof inspections

BUSINESS NEWS

122 Geissel India – German excellence at home

BFW sets up Dr. Kalam Center for Innovation

172 Profitable growth for the Lapp Group

India, the next manufacturing hub of the world; The Economic Times International Tooling summit

Introducing the Haas F1 Team VF-16 – The latest, fastest, most exciting ‘Machine’ to carry the famous Haas VF pre-fix

Tech Trends

Efficient sawing & storage with German-built high-tech solutions

No room for complexity

124 Rust Proof energy efficient Aipipe compressed air distribution system

Mastercam & Edge Factor announce strategic partnership

Mastercam’s new community app now available

Renishaw to highlight various metrology products at Diemould 2016

102 Machining group believes in a Haas future 108 Rollon actuators for food packaging systems ENGINEERING REVIEW

PUMPS VALVES BUSINESS NEWS 170 Mobile app brings Industry 4.0 to all pumps / ACHEMA 2015

TECH TRENDS

AIR COMPRESSOR

APRIL 2016

171 Economic long runner : The diaphragm valve type 604/605 171 ValvTechnologies extends Bi‐directional sealing feature to 5/8” Bore Valves www.engrreview.com

BUSINESS NEWS

» AUTOMATION

Hitachi Industry & Control begins sales of ADSTEFAN Ver. 2016” Casting simulation system in India Hitachi Industry & Control Solutions, Ltd. (“Hitachi Industry & Control”) announced that it will begin sales of “ADSTEFAN Ver. 2016”, a casting simulation system*1, in the Republic of India(“India”) on March 15, 2016. “ADSTEFAN Ver. 2016” was released in Japan on February 1, 2016. Hitachi Industry & Control is aiming to secure sales of 50 licenses per year in the Indian market. *1Support provided in three languages (Japanese, English, and Chinese (simplified characters)). “ADSTEFAN” is a simulation tool that enables users in the front lines of casting production in the molding materials industry to predict casting defects before they occur. It can simulate the inflow of molten metal into casting molds as well as the hardening process, both

of which have been treated like a “black box” so far, and displays those processes in 3D. This makes it possible to reduce the number of casting prototypes, cut down on development time, and improve quality, thereby to demonstrate results in terms of reductions in both costs and the resources consumed. Hitachi Industry & Control originally released “ADSTEFAN” in Japan in 1999, and since then has made improvements of product functions based on requests for enhancements from user companies and the results of joint research with universities and partner companies, offering upgraded versions each year. In 2007, it released “ADSTEFAN” for the first time in India, when a sales agency contract was completed with the ProSIM R&D Center, an Indian subsidiary, and

is now working to strengthen and enhance the sales and service structure in collaboration with partner companies. By “ADSTEFANVer.2016”, Hitachi Industry & Control will contribute to the development of the manufacturing industry in India. Mitsuo Takayama, President - Hitachi Industry & Control Solutions, Ltd., said: By offering the “ADSTEFAN” simulation system, Hitachi Industry & Control has contributed to improving quality and reducing man-hours in the front lines of casting production in the Japanese molding materials industry. Now, we are extremely pleased and proud to be able to offer the system “ADSTEFAN Ver.2016” in India.

Benefits of “ADSTEFAN”: • Reduction of Time: Time

•

Reduction for Development / Designing , Decreasing numbers of prototypes Reduction of Cost: Cost reduction for prototypes, Reduction of designing costs Improvement of Quality: Preventing casting defects, Improvement of yield rate, Improvement of product reliability Grasp of Defect Causes: Grasp and countermeasures for the defects from simulation results Accumulation of Technology: Accumulating and handing technology and know-how of designing data

For more information www.adstefan.com

Toradex offers embedded computer based on NVIDIA® Tegra K1 Toradex announces its latest embedded computer based on the powerful CUDA® capable NVIDIA® Tegra® K1. This new embedded computer or System on Module (SOM) will further extend the portfolio of Toradex’s ARM®-based SOM families. Apalis TK1 is ideal for building high-end embedded products, which needs advanced performance or supreme graphics, along with high-speed connectivity interfaces, mostly targeting applications in vision, and GPU-accelerated parallel processing. The Apalis TK1 is pin-compatible with the existing

ENGINEERING REVIEW

APRIL 2016

Apalis SOMs based on NVIDIA Tegra 3 and NXP i.MX 6Quad/ Dual processors.

Some of the ke y features of Apalis TK1 are: • Based on NVIDIA TK1 • Quad-core ARM Cortex-A15, up to 2.2GHz • CUDA 6.5 support • 2GB RAM, 16GB on-board Flash • Connectivity: USB 3.0, PCIe, SATA, GbE, CAN, PWM, I2C, SPI, etc. • Multimedia: HDMI, LVDS, Digital Audio, Touch, etc. “We are happy being able

to offer this new NVIDIA TK1 based module to our industrial customers. Developers can now take advantage of the CUDA 6.5 support and move their application to a yet unseen new level of high performance and parallel computing. This module is a testimony of the long-standing association of Toradex and NVIDIA and extends our existing SOM family based on the successful NVIDIA Tegra 2 and 3 processors. This partnership is fostering the commitment of both companies into the embedded market,” adds Stephan Dubach, CEO, Toradex.

“Apalis TK1 is the result of a partnership between NVIDIA and Toradex for the past years. With a growing market for embedded solutions requiring more features and more capacities, we are very pleased that Toradex developed a fully capable CUDA 6.5 module leveraging the Jetson TK1 platform’s extreme capacities for parallel computing and thus enabling the developer community and the industry to create smarter groundbreaking products and solutions,” said Serge Palaric, Senior Director, EMEA Embedded & OEMs Sales. Website: www.toradex.com

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

New “Edge Gateways” from HMS enable communication between IT-systems and the factory floor HMS Industrial Networks now introduces yet another gateway family for the Industrial Internet of Things. The new Anybus .NET gateways enable realtime data from industrial machinery to be presented to NET-based IT applications. This means that .NET programmers can get data directly from a PLC system on the other side of “the edge” to be used in applications for statistics, analysis or maintenance. The first .NET gateways are available for PROFIBUS and PROFINET.

A quick and easy way to realize IIoT The basic prerequisite for Industrial IoT is that industrial applications are able to communicate with IT systems. However, the operational technology (OT) on the factory floor uses fieldbus and industrial Ethernet networks, which are designed for real-time communication – by default separated from the IT-infrastructure. The Anybus .NET gateways address this situation by acting as translators which send and receive data between PROFIBUS- or PROFINET-networks and IT platforms using .NET as a framework. The communication is set up in a couple of minutes and the .NET gateways are therefore a very fast way to realize IIoT. The result is that IT systems

ENGINEERING REVIEW

APRIL 2016

get access to data from industrial machinery, while PLC programmers can rest assured that the data access does not interfere with their critical systems.”

HMS Industrial Networks

get unprecedented access to real-time data from the factory floor which enables predictive maintenance, KPI-follow-up, machine analytics, data mining, big data processing, production statistics and much more – without interfering with the industrial processes. The solution can be used for a wide range of use cases, from simple transfer of KPI values, advanced messages with structured data types, or ultra-fast transfer of I/O data for “big data.”

How it works In addition to connecting the data from the industrial processes to the IT-systems, the .NET gateways make the data understandable on the IT-side. The information exchange between the Operational Technology (OT) side and the Information Technology (IT) side is defined in a spreadsheet template which defines how the data is mapped, tagged and

presented to IT-applications. The spreadsheet is uploaded to the HMS code generator which automatically creates a customized high level C# API (events and Post methods) that is easy to integrate directly into a .NET application. It also generates a customized GSDML file for the PLC.

Easy for both .NET and PLC programmers “The Anybus .NET gateways represent a very fast and easy way to realize the Industrial Internet of Things,” says Markus Bladh, Product Manager at HMS Industrial Networks. “For more than 20 years, HMS has been offering industrial communication solutions between different standards on the factory floor, and we now use this experience to offer a gateway to .NET. This is truly an ‘edge gateway’ in the sense that it creates a bridge between the IT and OT side – .NET programmers

HMS Industrial Networks is the leading independent supplier of products for industrial communication including remote management. HMS develops and manufactures solutions for connecting automation devices and systems to industrialnetworks under the Netbiter, Anybus and IXXAT brands. Development and manufacturing take place at the headquarters in Halmstad, Sweden and in Ravensburg, Germany. Local sales and support are handled by branch offices in China, Denmark, France, Germany, India, Italy, Japan, UK, and USA. HMS employs over 350 people and reported sales of 57 million EUR in 2013. HMS is listed on the NASDAQ OMX in Stockholm.

For more information Web:www.anybus.com

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

Honeywell & Palo Alto Networks team to protect industrial control systems from cyber attacks Honeywell (NYSE: HON) Process Solutions (HPS) and Palo Alto Networks® (NYSE: PANW) are collaborating to boost the cyber security capabilities of control systems used by industrial facilities and critical infrastructure. Honeywell’s Industrial Cyber Security business is now offering the Palo Alto Networks Next-Generation Security Platform to industrial customers. The collaboration enables customers to better prevent cyberattacks against their Process Control Networks (PCN) and Operational Technology (OT) environments in order to protect their assets and maximize production uptime and safety. The joint solution offers unrivaled process network traffic monitoring and advanced threat prevention across the automation environment. It combines Palo Alto Networks’ advanced and natively integrated security platform with Honeywell’s unique process control domain expertise to provide a cyber security solution tailored for industrial customers. This nextgeneration offering enhances Honeywell’s comprehensive portfolio of cyber security solutions, including its Industrial Cyber Security Risk Manager platform.

QUOTES • “The collaboration with Palo Alto Networks expands our ability to provide proactive intrusion prevention resulting in more

ENGINEERING REVIEW

APRIL 2016

robust protection for our customers. It is an example of Honeywell’s unique multi-vendor approach that integrates state-of-the-art technology with proven expertise so that customers can confidently rely on our cyber security capabilities, quickly and effectively prevent threats, and focus on their daily operations.” Jeff Zindel, vice president and general manager, cyber security, Honeywell Process Solutions • “Connecting vital infrastructure to the Industrial Internet of Things (IIoT) comes with tremendous benefit, but also associated cyber risks. Our work with Honeywell addresses the cyber risk with next-generation security designed to meet the needs of industrial customers and provide them with threat detection and prevention capabilities

previously unseen in the industry.” - Chad Kinzelberg, senior vice president of business and corporate development, Palo Alto Networks Honeywell Industrial Cyber Security is the leading provider of cyber security solutions that help protect the availability, safety, and reliability of industrial facilities, critical infrastructure and the Industrial Internet of Things. Leveraging industry-leading process control and cyber security expertise and experience, highly advanced technology, and integrated partner security products, Honeywell delivers proven, complete solutions designed for the specific needs of industrial environments.

services for the oil and gas; refining; pulp and paper; industrial power generation; chemicals and petrochemicals; biofuels; life sciences; and metals, minerals and mining industries. Process Solutions is part of Honeywell’s Performance Materials and Technologies strategic business group, which also includes Honeywell UOP (www.uop. com), a leading international supplier and licensor of process technology, catalysts, adsorbents, equipment, and consulting services to the petroleum refining, petrochemical, and gas processing industries.

About Honeywell Process Solutions Honeywell Process Solutions (www.honeywellprocess.com) is a pioneer in automation control, instrumentation and

For more information www.honeywellnow.com

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

“After sales runs the market in India”

Mr. Ashok Tanna, Managing Director- Linnhoff India Pvt. Ltd. A joint venture of S-T Group with one of the most renowned Asphalt and Concrete Batching plant companies in the world viz M/s Linnhoff Technologies Pvt Ltd, Linnhoff & Henne GmbH & Co. KG, Lintec GmbH & Co. KG & IPS- Eurotec Asia Pacific Pvt Ltd, Linnhoff India Pvt. Ltd is located in Mumbai since last 15 years and manufacturing unit is in Khed near Pune, Maharashtra. Linnhoff India is one of the most preferred supplier for asphalt and concrete plants for the road construction industries in India. They are the only supplier in the country for Mastic plant with complete accessories. Managing Director- Linnhoff (India), Mr. Ashok Tanna spoke about Linnhoff India vision, its potential market and significant elements to sustain and succeed in the

ENGINEERING REVIEW

APRIL 2016

Indian Market, “with 65% of market share our core business strength is in asphalt plants, however we should not depend on only one market. We have decided to diversify the products in the concrete batching plant like pre-cast, PQC, lot of housing etc. from next year. He added further, In India it’s the after sales that runs the market, it’s never the product that runs the market. So, the after-sale plays a very critical role to have a successful business. Our main mission is to strengthen our after sales to the point where the customer is 100% satisfied with the product and also with the company. We want to make our customer feel “WOW” about the product. This “WOW” factor comes from excellent quality, esthetic, lower operational cost & after-sales service.

Changing to NORD products helped us to shorten panel, reduction of cost & quicker delivery For our drive requirements, NORD has been associated with Linnhoff for more than15 yrs with our parent company in Singapore. We brought the same association to India once we started our manufacturing in 2013. We have installed nearly 98% of drive units from NORD. “Apart from good product, their excellent service, good support, competitive price made us sticks to NORD. We would like to appreciate the people behind the product, the company & the policy behind it, says Mr.Tanna. Rural India – Road Construction Market Mr. Tanna said, “We have a huge market potential in the rural part of India.

Roads are classified under a time-honoured system into National Highways (NHs), State Highways (SHs), Major District Roads (MDRs), Other District Roads (ODRs), and Village Roads (VRs), with well-recognized standards for construction and maintenance laid out in respect of each category. Rural segment with total 5.2 million Kilometers has been completely ignored in India. And the government is still focusing on highways consisting 125,000 Kms of national highways & 700,000 Kms of state highways. We have already imagined gigantic boom in the road construction market in the near future. It will definitely take some time but we are positive with our new government rural development plan, mentioned by Mr. Tanna. On a concluding note, Mr. Tanna emphasized on being honest to your customers. One should always be certain about their commitments. In India, we value words more than written documents so we should always respect our words and be truthful. For more information Website: www.nord.com

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

Omron unveils first-of- its-kind ‘Total Tamper Detection Solution’ to address power theft

Omron, the world leader in sensing & control technologies, announced the launch of its Total Tamper Detection Solution – world’s first of its kind - to address the national level concerns of power ‘theft’ in the electricity sector. Positioned as a revolutionary offering for Smart Energy Management, the solution has been unveiled by the company at the ongoing India Smart Grid Week -2016. The solution comprises of a technologically advanced security sensor, made by Omron, positioned in a smart meter. Conceptualised in association with the utility, Tata Power Delhi Distribution Limited (TPDDL), the endeavour is visualised as a milestone in enabling the Smart Grid initiative of the Government of India and is also expected to play a key role in shaping the macro initiatives of national importance such as the need to channelize and curb the losses caused by power theft.

ENGINEERING REVIEW

APRIL 2016

Transmission and distribution (T&D) losses remain one of the major concerns for the power sector in India. As per varied industry reports, the country ranks 5th in the world in terms of installed capacity, but still more than 300 million people do not have access to electricity. This unavailability and insufficiency of electricity has a strong linkage with the transmission & distribution losses which amount to around 40 % of the total production. The losses give rise to a vicious cycle - utilities running into losses leading to increased power tariff leading to more burden on the end user which ultimately results into more unscrupulous ways to tamper with the meters. Explaining the role of Total Tamper Detection solution in managing power theft, Mr. Vinod Raphael, Country Business Head - Omron Electronic and Mechanical Components business division in India said, “Though it is difficult to reckon the

proportion of power theft in the T&D losses, it is certainly one of the major concerns for the utilities. Omron’s security sensor for the smart meters is multi-functional, imparting a unique artificial intelligence to the meter by detecting all kinds of tampering”. Sharing an overview of the business prospects of this solution, Mr. Raphael shared, “The government plans to install 35 million smart meters in the country by 2019 which is a promising business avenue. As we move ahead, we aim to widen our customer outreach by associating with more utilities and contribute towards developing a sturdy infrastructure in the power sector benefitting the utilities and the end consumers.” As per the reports, the power distribution loss in India rose to INR 70,000 crore recently*. Omron’s new solution is in synergy with the Government’s efforts towards minimizing T&D losses, considering the Government

set up a ‘Smart Meter Task Force’ to address this alarming state of affairs and to contribute towards moulding India as a Smart Grid Nation. In a bid to further utilise the opportunity of connecting with all relevant stakeholders in the smart grid world, the company also exhibited other key electronic components for smart meters and varied electrical equipment making them safer, energy efficient, compact and better in performance. Notable solutions for Smart Energy Saving and Smart Energy Supply comprising of panel builders solutions, real time automation based applications for the manufacturing sites, concepts of PV Inverter and Solar Pump were also put on display.

For more information www.omron-ap.co.in

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

Experience ‘Integrated Industry’ now: With ready-to-use products for IoT & Industrie 4.0 from Beckhoff As the world’s leading industrial exhibition, Hannover Messe 2016 provides the premier platform for Industrie 4.0 and highlights the progress towards ‘Integrated Industry’, making it truly tangible. The Beckhoff presence in Hanover is in line with this year’s lead theme ‘Discover Solutions’ and can be found in several areas of the exhibition grounds, focusing on IoT and Industrie 4.0. At the Beckhoff main booth in Hall 9, visitors can explore the expanded Industrie 4.0 forum. Spanning 1,000 square meters, Beckhoff will demonstrate basic technologies and ready-to-use products for the smart factory. TwinCAT Analytics records industrial data synchronously with the process cycle and serves as the basis for comprehensive analytics. TwinCAT IoT supports common protocols used in cloud communication and enables

In the smart factory Beckhoff meets the demands with TwinCAT Analytics regarding online and offline state analysis, predictive maintenance, pattern recognition, machine optimisation, and long-term data archiving.

ENGINEERING REVIEW

APRIL 2016

easy-to-configure connections between the Internet of Things and the Internet of Services. In addition, visitors can see the latest Beckhoff innovations such as EtherCAT P and TwinCAT HMI, and the new terminal integrating high-end measurement technology. Industrie 4.0 from Beckhoff: Four times at Hannover Messe Under the motto ‘Discover Solutions’, Beckhoff will focus this year’s exhibits on concrete solutions for ‘Integrated Industry’ in no less than four locations: At the Industrie 4.0 forum on the main booth in Hall 9, Booth F06, Beckhoff will present live demonstrations of products supporting analytics, big data, and IoT communication. As part of the booth for the ‘it’s OWL’ technology network (Hall 16, Booth A04), Beckhoff will demonstrate the current state of ‘Scientific Automation’ and ‘eXtreme Fast Automation’, both of which are BMBF-funded leading-edge cluster research projects. A showcase of SAP, Beckhoff and other technology partners in Hall 7, Booth C04, will feature a live application that demonstrates the close interaction between production processes and business administration workflows. Its foundation will be the XTS (eXtended Transport System) from Beckhoff. The SAP software communicates directly with the XTS on the basis of standardised services.

Complete acquisition and analysis of process data: TwinCAT Analytics

Based on comprehensive and cycle-synchronous data recording, the new TwinCAT Analytics solution enables seamless online and offline analysis of machines and production data. As a Microsoft Gold Partner, Beckhoff will present its new IoT products such as its easy and secure link between the automation and field levels and the Azure™ cloud at Microsoft’s booth in Hall 7, Booth C40. Experience ‘Integrated Industry’ now: The Industrie 4.0 forum All applications with Beckhoff PC control technology are essentially ready for Industrie 4.0 today. The new specific IoT and Industrie 4.0 products from Beckhoff make using these features even easier. The complete process control mappings which can be generated from the control technology make it easy for the user to assess the various machines and systems. Extensive Industrie 4.0 features are available at the click of a button. All of this is made possible by a variety of new products. TwinCAT Analytics provides the foundation for predictive maintenance and machine optimisation.

The smart factory introduces numerous requirements regarding online and offline state analysis, predictive maintenance, pattern recognition, machine optimisation, and long-term data archiving. This requires data capture to be as continuous as possible and in sync with the processing cycle. That is exactly why Beckhoff developed TwinCAT Analytics software. All process data can be provided as needed, either locally or as a cloud-based solution on a server, whether on your own corporate network or in a public cloud.

For fast and standardised cloud communication: TwinCAT IoT With its new TwinCAT IoT solution, Beckhoff supports standardised protocols for cloud communications and for sending push messages to smart devices. Quick and easy to configure, TwinCAT IoT provides a variety of functions for exchanging process data via widely-used communication protocols such as AMPQ, MQTT, and OPC UA, and for accessing special data and communication services that belong either to public clouds or local systems.

For more information www.beckhoff.com

www.engrreview.com

BUSINESS NEWS

» AUTOMATION

Rutronik opens new warehouse & logistics Center in Austin, Texas

Jeff Shafer, Vice President North America at Rutronik The Rutronik Elektronische Bauelemente GmbH warehouse in the USA is now fully up and running. Seated in Austin, Texas, it serves as the central distribution center for Rutronik customers in the USA, Canada and Mexico. The new warehouse and logistics center based in Austin

has sufficient capacity to fully supply both legacy and new customers. It maps all processes of the European central warehouse based in Ispringen, Germany. These were brought into line with state-of the-art technology during the new warehouse construction in 2014 to enable orders to be processed even faster. All global warehouses access the same IT system and are networked to each other, ensuring a seamless support and supply for the customers across borders. Thus, Rutronik can ship all components efficiently on a worldwide basis, and do so with the shortest-possible delivery times and transit channels.

The new Rutronik warehouse and logistics center in Austin/ Texas is networked to the warehouses in Europe and Asia for globally seamless and efficient processes. Rutronik began its sales operation in North America with the headquarters located in Cleveland, Ohio, in April 2015. Beforehand, deliveries were carried out from the European central warehouse

and logistics hub in Asia. “Our start in the USA has clearly exceeded our best expectations. We have not only convinced the majority of our global customers to also conduct their American business with us, we have also gained numerous new local customers and franchises that align with our supplier linecard in EMEA. Now, with our warehouse implementation, we can provide our customers with a best-in-class quality service”, explained Jeff Shafer, Vice President North America.

For more information Website: www.rutronik.com

Fast & easy implementation of foundation fieldbus and PROFIBUS PA field devices As a product highlight at the embedded world trade fair in Nuremberg / Germany (23 to 25 February, 2016) Softing presented the next generation of its successful communication module commModule PD (successor to the Fieldbus Kit FBK-2) for the integration of Foundation™ fieldbus and PROFIBUS PA functionality in field devices. The commModule PD is the successor of Softing’s proven Fieldbus Kit FBK-2. It doesn’t require special fieldbus or programming knowledge, which makes fieldbus implementation fast and easy, and has an even smaller footprint compared to the FBK-2. The module offers greater flexibility and

ENGINEERING REVIEW

APRIL 2016

Fast and Easy Implementation of Foundation fieldbus and PROFIBUS PA Field Devices performance by using a 32 bit microcontroller with significantly more memory (RAM & ROM). The functionality of the fieldbus controller is implemented in software, which reduces the power consumption (captive) of the module by approximately 25% compared to the

FBK-2 solution. In addition, the commModule PD enables automatic assembly (SMD, Surface Mounted Devices), thereby reducing the manufacturing and handling costs significantly. Using this module as part of the commKit FFeasy / PAeasy product replaces the

previously required complex development project by a simple and fast implementation approach. By integrating the commModule PD, the bus physics is already prepared for the connection of Foundation fieldbus H1 and PROFIBUS PA. An extensive library of Function and Transducer Blocks is available for immediate integration eliminating the otherwise necessary software programming. Users do not need special Foundation fieldbus or PROFIBUS PA knowledge and benefit from a rapid time to market.

http://industrial.softing.com

www.engrreview.com

BUSINESS NEWS

» ENGINEERING

Hanna Instruments, Inc. Introduces HI902C Titration System with Password Protection Hanna Instruments is pleased to announce the release of HI902C titration system with new innovative features. The HI902C is the automatic titrator that complements Hanna’s wide range of products dedicated to quick and accurate laboratory analysis. HI902C can perform acid-base, redox, complexometric, precipitation, non-aqueous and argentometric titrations. The HI902C dispenses the titrant, detects the endpoint and performs all necessary calculations automatically. HI902C is useful for major applications like Food, Pharmaceuticals, Dairy, Wine, Water, Fruit juice, Plating & many more..

Features at-a-glance: Administration Options: New options allow users to adhere to strict traceability requirements with password

protection ensuring records remain safe and secure.

Memory Space Optimization : This simple option in the HI902C setup menu lets users consolidate fragmented data stored on the titrator.

Automatic Reagent Addition : Users no longer have to manually add reagents to a sample. Instead, a precision dosing burette can be programmed to volumetrically dispense reagent

Direct Measurement (Non-Linked Method) : The HI902C performs as a high accuracy pH, ORP, and ion selective benchtop meter that can now log and report direct measurements. Users can easily track and manage data without the hassle of manual record keeping.

Additional Linked Methods: While the HI902C was previously able to link two single end point titrations together, it is now capable of much more. Direct measurement methods of pH or selective ions can be linked to each other or to a variety of titration analyses such as single end point, multi-EQ point, or back titrations. • Four working modes; Potentiometric titrator, pH meter, mV meter, and ISE meter • Clip –Lock Exchangeable Burette System • Linear & Dynamic Dosing • Real-time titration curve • Support up to 100 methods • Optional HI9021 sampler can be connected

of electro-analytical instrumentation. Since 1978 Hanna has produced practical, cost effective devices for laboratory, environmental, food, and industry applications. We offer a wide array of instrumentation from research grade benchtop meters and ISEs to single and multiparameter portable meters for pH, conductivity, dissolved oxygen, turbidity, and more. Hanna has over 40 offices worldwide to ensure exceptional levels of service and support anywhere in the world.

About Hanna Hanna Instruments, Inc. is the world’s largest privately held manufacturer

ENGINEERING REVIEW

APRIL 2016

For more information Web: www.hannainst.com

www.engrreview.com

Dedication and Experience! The Broadest HMI Model Range! The Best End-User Experience! eTOP500 Series

eTOP600 Series eSMART Series

Most Environments

Same Software Same Resolution Same Cutout The Right HMI for the Job! Exor India Private Limited | www.exorindia.com | Navi Mumbai, India | +91 22 2781 0422/23/24 | info@exorindia.com

BUSINESS NEWS

» ENGINEERING

Pankaj Thapliyal joins as President of Smart Utilities, part of Essel Group Dr. Subhash Chandra led diversified Essel conglomerate announced the appointment of Mr. Pankaj Thapliyal as President for the Integrated Utility Business, Smart Utilities – the flagship brand of Essel Utilities Distribution Company Ltd. Smart Utilities is India’s first Integrated Utility Company which is committed towards delivering smart value and efficiency by participating in public-private partnership projects across India to transform the ageing public utility infrastructure into modern state of the art utility realm. Speaking on the appointment of Mr. Thapliyal, Mr. Ashok Agarwal, CEO, Essel Infraprojects, said, “We welcome Pankaj on board. He has wide experience in sectors like telecom & FMCG, which have large consumer base and will be beneficial for our organization. Pankaj will focus on roll-out of new businesses in B2C vertical and revenue growth in existing streams and has amply demonstrated his ability in his previous organizations. He is recognized business leader with 20+ years of accomplished experience towards managing large conglomerate business operations with demonstrated record of providing strategic direction, driving revenue and the growth of human capital. This will add huge value to our utility business.

ENGINEERING REVIEW

APRIL 2016

Smart Utilities simultaneously carters to five essential utility services namely power distribution, water distribution, solid waste management, city gas distribution and cable & broadband. The company is managing power distribution franchise in Nagpur (Maharashtra), Sagar (MP) and Muzaffarpur (Bihar) Currently the Company boast to be the largest power distribution franchise in India. Smart Utilities also manages the water distribution franchise in Aurangabad (Maharashtra), Bhagalpur (Bihar) & Tonk (Rajasthan). Commenting on his decision on joining Essel Utilities Distribution Company Limited, Mr. Thapliyal said, “Globally Utility Companies face the triple challenge of improving environmental performance, keeping consumer’s cost down and maintaining system reliability. We see there is a huge scope of improvement in the existing public utilities in India by investing in the assets and deploying global best practices. The Public Private Partnership (PPP) model is way forward to go in utility business and long term association spanning 25 to 30 years will nurture integrated smarter communities across major cities of India. Under his leadership the company will be delivering

smart value and efficiency by participating public-private partnership projects across India to transform the ageing public utility infrastructure into a state of the art utility empire. He is committed in improving the existing public utilities, by investing in assets and deploying global best practices. He is ensuring that the organization is developing innovative, sustainable and eco-friendly landscapes providing scalable and affordable services for a smarter life. He will be instrumental in instituting internal processes and compliances through cohesive program management & business excellence initiatives for B2C business. He is known for his clear foresight, business acumen and ability to increase productivity, growth and profitability. He is people’s person and uses mantra of transforming people to transform the businesses. Mr. Thapliyal is an alumni of IIM (Institute of Management) Calcutta and has pursued his Masters in Business Administration (MBA) from Institute of Management Science and Productivity Research, New Delhi, which is one of the oldest and respected management schools in the country.

Mr. Pankaj Thapliyal, President of Smart Utilities, part of Essel Group business houses with a diverse portfolio of assets in media, packaging, entertainment, technology-enabled services, infrastructure development and education. The Group started business in 1976 with a commodity trading and export firm. Today, Essel Group of Companies is a vast conglomerate of Media, Technology, Entertainment, Packaging, Infrastructure, Education, Healthy Lifestyle & Wellness, Financial Services and Precious Metals with worldwide operations and a workforce of over 10,000 dedicated employees.

About Essel Group The Essel Group is among India’s most prominent

www.engrreview.com

Automation, Power Transmission & Control Technology & Solutions for Sustainable Business Growth

Hydraulics & Pneumatics, Electro-Mechanical Transmission www.mda-india.com

Factory & Process Automation www.ia-india.com

1-3 December 2016

OK O B UR YO NOW E AC P S

MMRDA Grounds, Mumbai Joint Organiser for MDA INDIA

Knowledge Partner for Automation Training Zone

For Participation and Sponsorship Enquiry, Please write us - sales@hmf-india.com

Concurrent Show:

BUSINESS NEWS

» MACHINE TOOLS

BFW sets up Dr. Kalam Center for Innovation Riding on the ‘Make in India’ wave, BFW inaugurates its first world class Research and Development Center in India.

Bharat Fritz Werner (BFW), a leading manufacturer of machine tools for more than fifty years, inaugurated the Dr Kalam Center for Innovation at its premises in Bengaluru, India. This world class Research & Development centre, which has been set up with an investment of Rs 25 million, is a step forward towards increasing BFW’s global footprint, while simultaneously retaining its position in India. BFW expects to end FY 2016 with an annual turnover of Rs 900 crores. This Innovation Center named after Dr APJ Abdul Kalam is a tribute to the great scientist, researcher and innovator. This is BFW’s first Innovation Center spread over 3000 sq feet. The Dr Kalam Center for Innovation was inaugurated by Shri A S Kiran Kumar, Chairman, Indian Space Research Organization. Scientists at this Center will work on core research to improve and develop energy efficient and alternative material machine tools. Also present on the occasion were Mr.

ENGINEERING REVIEW

APRIL 2016

G K Moinudeen, Director & Head, Karnataka State Office, Confederation of Indian Industry and Mr. J Sheik Saleem, grandnephews of Dr APJ Abdul Kalam. Speaking at the function, Shri Kiran Kumar said, “I am happy to be a part of this Center’s inauguration. Research and Development is vital for India’s manufacturing capabilities. At a time when we are looking at Indian manufacturing moving to the next level, BFW’s approach is laudable. This Center is a tribute to Late Dr APJ Abdul Kalam who was the guiding force for many scientific innovations. It is indeed a great initiative that BFW will collaborate with academic institutions for R&D.” Bharat Fritz Werner, acquired the Turning business of Chennai-based engineering firm Proteck Machinery 9 months ago. BFW is aggressively working towards import substitution and contributing towards the ‘Make in India’ mantra by introducing a plethora of machining options. Shri AK Kothari, Chairman BFW said, “Our Group

companies, stress a lot on R&D irrespective of the industry to which they cater. Innovation is at the centre stage of our corporate philosophy. At BFW, we believe our customers deserve innovative machine tools and, we are committed to making the right investments to reinforce customers’ trust in us.” BFW has transitioned from being a traditional machine tool manufacturer to becoming a NextGen solutions provider. The company aspires to be one among global top 20 machine tool manufacturers by 2020. Mr Ravi Raghavan, MD & CEO, BFW said “Spends on R&D in India are well below the global standard across industries. As a nation we need to pay greater attention to innovate and transform. At BFW, we recognise our responsibility as one of the leaders and being a pioneer in this industry, we are striving to drive progress by singularly focusing on R&D. Our ambition is to be a strong global player and research is the backbone

of our plans. In the coming years, we will continue to invest in cutting edge technology.” BFW has a leading share of the domestic milling market. With a subsidiary in Germany, the company today caters to the global needs of customers for high end milling needs. With the acquisition of Proteck Machinery, BFW has made a commitment to be a leading player also in the Turning segment. Mr T Subramaniam, Head of the Innovation Center, BFW said, “While BFW’s design capability is acknowledged worldwide, we need to complement this with inputs from core research. This is what the Innovation Center will help us achieve. Investments in manufacturing R&D are critical for a country’s progress and employment generation.”

For more information Website: www.bfwindia.com

www.engrreview.com

ENGINEERING REVIEW |

41 | April 2016

BUSINESS NEWS

» MACHINE TOOLS

India, the next manufacturing hub of the world; The Economic Times International Tooling summit The Economic Times recently conducted International Tooling Summit to discuss the eminent role of tooling in the ambitious ‘Make in India’ initiative. Held in Mumbai, the event was brought forth in association with TAGMA India. India today stands amongst the twenty largest producers of cutting tools in the world. The tooling industry as per the industry survey is estimated to be Rs. 15,100 cr for 2014-15 out of which close to Rs. 8,000 cr is met indigenously. Understanding the importance of the sector in the infrastructure of the economy, Sunita Quadros, Business Head, TCL said, “ The strength of tooling industry is directly associated to the growth of auto and electronics business. We, at Economic Times are glad that we could provide a platform which triggers discussions, provides insights and facilitates change and growth of the sector.” Sharing his views Kamal Bali, MD, Volvo said, “I believe that the “Make in India” program strikes at the root of the critical shortcomings in manufacturing, namely the need for higher value-capture in India. The tooling industry is rightfully positioned to fulfill this shortcoming by facilitating higher value addition, thereby creating greater economic activity. Competitiveness of the Indian manufacturing sector, more jobs, inclusive and sustainable growth will pave

ENGINEERING REVIEW

APRIL 2016

way for higher exports from India.” The event saw several thought provoking panel discussions, as a part of which Anoop Chaturvedi, VP, Production Engg., Maruti said, The Indian automobile/ manufacturing Industry is rapidly evolving as a key global player. This rapid growth coupled with globalization has led developments in technology and regulations. This offers growth opportunities to tooling industry, which is known for low cost manufacturing but need to build world class capabilities in design & innovation, robust processes, and reduce product development time while keeping focus on quality.” As a part of the panel ‘Making India the manufacturing hub of the world’ Dr. Wilfried G. Aulbur, Managing Partner India, Chairman Middle-East & Africa, Head Automotive Asia, Roland Berger Strategy Consultants Pvt. Ltd. said, “National

into several emerging areas. It has given a new lease of life to the sector with an expectancy of 15-20% year-on-year growth.

About ET Edge:

manufacturing industries depend on high-performing tool manufacturers to bring products to market. Meeting quality, performance, aesthetics and cost targets is impossible without reliable partners on the machine tool side. India’s machine tool manufacturers have moved up the value chain as the increasing success in import substitution demonstrates. However, to be true partners in making “Make in India” happen, further improvements across a number of process parameters are necessary.” Despite various challenges, the Tooling industry has managed to surge ahead in the last ten years with diversification

Times Conferences Ltd., functional under the brand name ET Edge, is an Economic Times initiative founded to empower multiple industries and segments by sharing critical business knowledge through strategic conferences and summits. Encompassing the Indian business vista, ET Edge strives to bring together visionaries and key leaders on its knowledge platforms to create social and business ecology conducive to the positive changes required by the industry. The main aim of this initiative is to channel global business intelligence through summits and conferences in overarching lectures, hands-on workshops, panels, roundtables and case studies.

www.engrreview.com

BUSINESS NEWS

» MACHINE TOOLS

Introducing the Haas F1 Team VF-16 – The latest, fastest, most exciting ‘Machine’ to carry the famous Haas VF pre-fix The VF-16, Haas F1 Team’s first racecar, has arrived! The car was revealed February 21st to the world motorsport press at the Circuit de Barcelona – Catalunya, where it began pre-season testing, February 22nd. Of all Haas machines with VF nomenclature, this four-wheeled, Ferrari-powered model has been perhaps the most eagerly anticipated since Gene Haas stated his intentions to enter the world’s greatest race series, less than 2-years ago. Haas Automation Inc., the company Mr. Haas founded in 1983, is Haas F1 Team’s principal sponsor and the genesis of the F1 venture. “From an international standpoint, Formula One is the highest echelon of racing, and Haas Automation builds the highest-quality machine tools,” said Mr. Haas, who has grown Haas Automation Inc. into the largest machine tool builder in North America, with more than $1 billion in annual sales. “When you hear the words Formula One you know exactly what they stand for: a global racing series that invests in the latest technology and attracts the best talent in engineering and design. Haas Automation has an

excellent reputation in the United States – for reliability, innovation, and value for money – and I want that reputation to continue to grow worldwide. Connecting Haas Automation with F1 in name and in practice is the best way to grow our business, and elevate Haas Automation to a premium, global brand.” The dark grey, light grey, and striking red-toned livery of the Haas VF-16 was derived from that of Haas Automation’s CNC vertical and horizontal machining centers, turning centers, and CNC rotary tables and indexers: a ‘complete’ line of highproductivity CNC products. The Oxnard, California-based Haas Automation Inc. employs around 1300 people, and exports approximately 60% of its annual production to more than 60 countries. There are close to 185,000 Haas CNC machine tools installed around the world, supported by a network of 170 Haas Factory Outlets (HFOs) – independently owned sales and technical service businesses, dedicated to providing industryleading support, wherever a customer is based. The VF-16 demonstrates Haas Automation’s – and Gene Haas’ – commitment to

technology and innovation to a passionate, global audience, many of whom are already Haas customers, or who perhaps work in the precision engineering and manufacturing sectors. “Just as Haas Automation’s CNC machine tools evolve continually, becoming better and more efficient as time goes by, our methodology behind the VF-16 was to make it the best evolution of a good F1 car,” explained Guenther Steiner, team principal, Haas F1 Team. “As we’re a new team, we studied what the successful F1 teams were doing, so we had a strong baseline for the direction we needed to go with our design. “We need to go out there and show that we can do the job – that’s our first objective,” states Steiner. “Then show we can finish races, that we are respected by the fans and other teams in the paddock and, of course, that we can score points. That’s the goal!” The VF-16 is being tested on-track at Barcelona Feb. 22-25 and March 1-4, before its debut race, the season-opening Australian Grand Prix, March 20, in Melbourne. For more information Website: www.HaasCNC.com

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

BUSINESS NEWS

» MACHINE TOOLS

Efficient sawing & storage with German-built high-tech solutions KASTO Maschinenbau GmbH will be presenting its extensive portfolio of products and services. This German enterprise is a global market and technology leader in the manufacture of systems for sawing and storing bar stock and sheet metal. Its success is based on its innovative, topquality products, on the one hand, and the expert, personal service it provides, on the other. KASTO’s product range includes metal-cutting sawing machines and semi-automatic and fully automatic storage systems for bar stock and sheet metal as well as automatic handling systems for metal bars, sheet metal and pre-cut parts. Visitors to CCMT can obtain detailed information in hall N1, stand number 317. The sawing and storage technology specialist has already applied

KASTO supplies the UNITOWER tower storage system & other systems for the economic storage of bar stock and sheet metal.

One example of KASTO’s innovative solutions in the field of sawing technology takes the form of the KASTOwin range of versatile, multipurpose, fully automatic band saws. for 160 patents, sold more than 140,000 sawing machines worldwide and installed more than 1,700 automatic storage systems. One of the Europe’s oldest family-owned companies, KASTO celebrated its 170th anniversary in 2014.

The company has had an active presence in Asia since 1991 and has attracted a longstanding, loyal customer base. To improve the service it delivers to users in the region even further, KASTO has recently decided to open a subsidiary

in Singapore. Operating out of this site, KASTO intends to strengthen its presence in the Asian markets and provide an even faster, more personalized service. This specialist company supports users in every phase of a project: from planning and development of a plant through construction and commissioning all the way up to maintenance and service. For more information Web: www.kasto.de

No room for complexity Pramet’s high feed Penta HF cutter offers a highly versatile and simplified milling option for multiple applications. Designed primarily for high metal removal operations, the Penta HF is suitable for machining a wide variety of materials, including corrosionresistant steels, difficult-tomachine steels and heat-treated steels. The cutter features a 19° entering angle, enabling a maximum feed per tooth of 3mm. By supporting faster feed rates, machining time is reduced. In addition, a special surface finish promotes

ENGINEERING REVIEW

APRIL 2016

increased corrosion resistance, as well as reduced wear and friction resistance. With its economical five cutting edge inserts design,

the assortment is suitable for roughing to semi-finishing applications. Penta HF also supports internal coolant for deep milling and helical

applications. A wide range of diameters from 32 – 100mm, as well as a choice of shank and bore styles, offers a number of options for the user. In a recent case-study in North America, the Penta HF cutter with PDMW inserts was able to machine an entire component of structural steel without stopping to index the inserts. This compared to a competitor’s insert, which needed to be indexed three times to complete the same application, provided a significant saving on machine downtime.

www.engrreview.com

BUSINESS NEWS

» MACHINE TOOLS

Mastercam & Edge Factor announce strategic partnership Rooted in their mission to inspire the next generation of makers and fill the advanced manufacturing skills gap, the partnership between Mastercam and Edge Factor has been collaborative and longstanding. Mastercam, a widely-used CAM software company, and media production company Edge Factor, are proud to announce the continuation of their strategic partnership for 2016. Recognizing the need to fill the manufacturing pipeline, Mastercam is supporting the Edge Factor team as they focus on producing high impact media and interactive resources for educators and business leaders to inspire the next generation of makers, available through edu FACTOR memberships (edufactor.org).

Looking back at 2015 In 2015, Mastercam and Edge Factor partnered on major initiatives including Rock MFG Day Kit event resources used by 734 organizations to host MFG Day events, a LaunchPoint TV episode that features the career pathway of one of

ENGINEERING REVIEW

APRIL 2016

Mastercam’s young female machinists, and the upcoming Edge Factor documentary “Masters of Resonance” that tells the stories of makers and musicians such as John Good from DW Drums, Bob Taylor from Taylor Guitars, and Neil Peart, the drummer from Rush. They also worked together on several eduFACTOR resources such as the “Geek Out” technology video series and hands-on CNC machining and 3D printing projects. Building on the success of last year, Mastercam and Edge Factor are excited to move forward and partner together in 2016.

2016 Initiatives This year, the latest Edge Factor film “Masters of Resonance” is in postproduction and the crew will be producing three new films featuring students working on parts for NASA and the ISS, life changing inventions with MIT, and sustainably powered vehicles. Mastercam and Edge Factor are partnering to create many eduFACTOR resources

including 15 “Geek Out” technology videos, the 2016 version of the Rock MFG Day Kit, 3D printing and CNC machining projects, and tools based on the new films. “Mastercam holds over 20% of the Educational Market, and we are committed to the future of our industry,” said Meghan West, President of CNC Software Inc. “The need for manufacturing jobs over the next few years will be high, and partnering with Edge Factor allows us to help tell stories and create resources that inspire the next generation of our industry.” As the network of schools and companies that use Edge Factor resources grows, there is a constant flow of new content that span industries and careers to meet the needs of industry and education face, as they seek to inspire audiences and raise up the next generation of manufacturers. “To accomplish the things we do, it takes a team. When we stop and think of partnership with Mastercam, we don’t just think of them as a big

software company. We think of the amazing team of people and the Mastercam family that we have had the privilege of working closely with for the last several years,” said Jeremy Bout, Producer/Host of Edge Factor.

About Mastercam Developed by CNC Software, Inc., Mastercam is Windows®based CAD/CAM software for 2- through 5-axis routing, milling and turning, 2- and 4-axis wire EDM, 2D and 3D design, surface and solid modeling, and Swiss machining. Privately owned and founded in 1983, CNC Software provides CAD/ CAM solutions to more than 211,000 installations in 75 countries in industries including moldmaking, prototyping, automotive, medical, aerospace, consumer products, and much more.

For more information Web: www.mastercam.com

www.engrreview.com

BUSINESS NEWS

» MACHINE TOOLS

Mastercam’s new community app now available CNC Software has released an iOS App intended as a useful shop-floor tool for Mastercam users and non-users alike. The Mastercam Community App delivers practical information and calculators for any shop, coupled with immediate access to the Mastercam forum, knowledge base, and more for Mastercam users.

Here are some of the features in the Mastercam Community App: Radial Chip Calculator – Dial in feed rate and spindle speed, based on step-over amount, feed-per-tooth, and surface speed to help you create the optimum conditions for your tool. The calculator works in inches and metric. Drill/Tap Chart – Quick conversions and easy reference

ENGINEERING REVIEW

APRIL 2016

to decimal equivalents and tap sizes of fraction, number, letter, and metric sizes, and all at the tip of your fingers. Knowledge Base – Users can browse hot topics and articles from the extensive Mastercam knowledge base. Access to the Forum – Ability to jump right onto the users’ forum where you can learn about tips and tricks on Mastercam, and ask any questions you may have and get immediate answers from fellow Mastercam users. News Feeds of social media platforms – Stay up-to-date on the latest Mastercam news and tips. Videos – Access Mastercam videos; from new product

release features to customer success stories. CNC Product Line – Find information on each of Mastercam’s products at your fingertips. My Reseller – For questions or inquiries, find out who your own local Mastercam Reseller is. For more information on the Mastercam Community App, please visit http://

www.mastercam.com/en-us/ Communities/Community-App. To download the app on your iPhone or iPad, please visit https://itunes.apple.com/us/ app/mastercam-community/ id991322294?mt=8 or just search iTunes for “Mastercam Community.”

For more information www.mastercam.com

www.engrreview.com

BUSINESS NEWS

» MACHINE TOOLS

Renishaw to highlight various metrology products at Diemould 2016 At the Diemould exhibition taking place at Bangalore International Exhibition Centre, Bangalore, India, from 6-9 April, Renishaw (hall 2A stand B38) will highlight a range of process control solutions that help tackle the increasing drive to lean manufacturing, from new technologies for pre-process machine calibration, to on-line and off-line post-process measurement. There will also be a significant focus on the company’s additive manufacturing (3D printing) systems with the new PlusPac™ upgrade for its AM250 additive manufacturing machine. The company will have active demonstrations of its Equator gauging system along with various machine tool software’s catering to Diemould industry. Renishaw is the UK’s only manufacturer of a machine that ‘prints’ metal parts and visitors to the Renishaw stand will be able to see applications that demonstrate the capabilities of the company’s additive manufacturing technology and Strain gauge high-accuracy machine tool touch probes - Unparalleled accuracy and repeatability make this technology the best choice for complex multi-axis work and machine calibration .

RENGAGE™ technology RENGAGE™ technology delivers true three dimensional (3D) measurement performance and submicron repeatability. So for exceptional performance, reliability and durability, why choose anything less? Conventional probes continue to fulfil a valuable role, which is why Renishaw maintains its

ENGINEERING REVIEW

APRIL 2016

position as market leader in the design, manufacture and support of these products. However, for numerous applications, the significant performance benefits offered by RENGAGE technology provide users with a competitive advantage, for both now and the future. RENGAGE technology is available with radio transmission in the RMP600; with optical transmission in the ultra-compact OMP400 and compact OMP600; and in the miniature MP250, offering an unmatched combination of size and accuracy.

The Primo™ system – opening up the world of precision manufacturing At Diemould Renishaw is highlighting the Primo system: an entry-level machine tool probing system that opens up the world of precision manufacturing to all types of manufacturing operation. A genuine breakthrough business model, the Primo system makes it easy for manufacturers to take their first steps towards higher-value manufacturing by automating their operations and achieving repeatable processes.

Renishaw fixtures: the new single source for metrology fixturing Following the acquisition of R&R Sales LLC in 2012, Renishaw has developed an extensive new range of modular fixturing designed specifically for co-ordinate measuring machines (CMMs), vision systems and its Equator™ gauging system. Visitors to Diemould 2016 will

see that the new range offers a wide choice of base plates and components available in M4, M6 and M8 thread sizes, and can be utilised for measurement applications across multiple industries, such as aerospace, automotive and medical.

Automated gauging and process monitoring software for the Equator™ gauge Renishaw Equator™, a lightweight, fast and highly repeatable gauge, will be demonstrated in an automated cell. Equator’s innovative flexible gauging technology is based on the comparison of production parts to a reference master part, which can greatly increase throughput and reduce scrap rates at a fraction of the cost of an equivalent custom gauging system. Equator can switch between parts in seconds, perfect for flexible manufacturing processes or accepting parts from multiple machines. A new process monitoring window has also been added to the shop-floor user interface for the Equator gauging system. This instantly displays measurement results of inspected features to the operator on a bar-graph display. It also shows the history of measurement on each feature so that process trends can be

seen. The system’s re-mastering process can now be managed based on temperature limits, number of parts or time since last master.

Enhancements in metal 3D printing Visitors to Diemould will also see a new range of additive manufacturing technologies. Renishaw’s laser melting systems utilise a pioneering, additive manufacturing process capable of producing fully dense metal parts direct from 3D CAD, using a high-powered fibre laser. Parts are built from a range of fine metal powders that are fully melted in a tightly controlled atmosphere, in layer thicknesses ranging from 20 to 100 microns.The AM250, Renishaw’s first additive manufacturing machine is now available with PlusPac – an add-on kit which transforms the machine to meet the demand for cleaner process environments, improved surface finish and precision. PlusPac includes new Optical Control Software (OCS), a gas knife lens window protection system, and a high capacity filtration system. These updates give the user tighter control over the build process, enabling users to create even better components.

For more information www.renishaw.com

www.engrreview.com

Electro-mechanical troubleshooting has changed. Isn’t it time your oscilloscope did too? Automated industrial machinery is harder than ever to troubleshoot. It’s not enough to just know where to test, you also have to know what to look for. The new 120B Series ScopeMeter® Industrial Test Tools are designed to simplify testing and give you more insight than ever before, so you can troubleshoot faster and keep your systems up and running.

Automatically display critical waveform measurement information quickly with Fluke IntellaSet™ technology.

Automatically set up oscilloscope with Connect-and-View ™ triggering for hands free operation.

Wirelessly capture and share data with Fluke Connect ® app via your mobile device.

Identify and log elusive random events with Recorder Event Detect.

The future of electro-mechanical troubleshooting is here, from the inventors of the ScopeMeter Hand-Held Oscilloscope. SMS “FLUKE<space>ER16” to 56767 to book for a free demo

FLUKE TECHNOLOGIES PVT. LTD. #1074-A, 8th Cross, 11th Main, HAL 2nd Stage, Indiranagar (Behind ESI Hospital), Bangalore - 560 038 Tel : +91 80 6715 9000 | Toll Free : 1800 419 3001 Email : info.india@fluke.com | Website : www.fluke.com/india | www.facebook.com/flukeindia

BUSINESS NEWS

» MATERIAL HANDLING

BEUMER Group to deliver sortation system for DPD Russia’s new logistics centre

Fast, flexible, gentle: The BEUMER Rota-Sorter sorts various articles of different sizes, weight categories and packaging BEUMER Group - a leading global supplier of automated parcel and post handling systems – has been awarded a contract to design, manufacture and install the innovative Rota-Sorter at DPD Russia’s new central logistics centre in Domodedovo, Russia. As an International Courier, Express and Parcel (CEP) service provider, DPD Russia is investing in the Rota-Sorter to provide the additional capacity needed to support a strong growth in demand from the Russian market. The Rota-Sorter was chosen for its ability to sort items across a wide range of shapes, sizes and weights on a single line and at high speed, as well as for its gentle handling of even

ENGINEERING REVIEW

APRIL 2016

fragile items. DPD already uses a Rota-Sorter in its logistics centre at St. Petersburg where the system has delivered a 100% increase in productivity since it began operating in December 2014. This direct experience of the Rota-Sorter was the basis for DPD Russia’s decision to install a RotaSorter in the new logistics centre at Domodedovo. The Rota-Sorter sorts items ranging in size and weight from plastic bags and catalogues to packages up to 1,200 x 800 x 800 mm in size and weighing up to 31.5 kg. The sortation system at Domodedovo will integrate 15 discharge chutes, barcode scanners and a fully-automated volume measurement system. Despite

sorting up to 3,500 items per hour the Rota-Sorter’s gentle handling will help to increase customer satisfaction by minimising damage to parcels, whilst its low-noise operation will also ensure a more ergonomic working environment. The Rota-Sorter will be equipped with a Scada Supervisory Control And Data Acquisition (SCADA) system as well as BEUMER’s BeSS (BEUMER Sortation System) logistics software to ensure an error-free and efficient operation. A transparent interface to DPD’s host system will also ensure transparent operation across the different systems and controls. This will enable DPD to provide a fast, flexible and reliable supply to

customers throughout Russia. The BEUMER Group is an international leader in the manufacture of intralogistics systems for conveying, loading, palletising, packaging, sortation and distribution. Together with Crisplant a/s and Enexco Teknologies India Limited, the BEUMER Group employs 4,000 people worldwide, and achieves an annual turnover of about 680 million EUR. With its subsidiaries and sales agencies, the BEUMER Group serves customers around the globe, across a wide range of industries.

For more informaton Web: www.beumergroup.com

www.engrreview.com

HANNA TITRATION SYSTEM - HI902C Powerful Customization - Accurate Analysis - Versatile Data Management Hanna Titrator is useful for major applications like Food, Pharmaceuticals, Dairy, Wine, Water, Fruit Juice, Plating & many more.. • Password protection & data safety

• Real time titration curve

• Four working modes; potentiometric titrator, pH meter, mV meter, and ISE meter

• Support upto 100 methods

• Clip-Lock™ Exchangeable Burette System

• Optional HI921 Autosampler can be Connected

• Linear and dynamic dosing

View, Store, Print

with HANNA PC Connectivity

PC with HANNA Software

VGA Display

Parallel Printer

PC Keyboard

Hanna Equipments (India) Pvt. Ltd.

Kharghar, Navi Mumbai - 410210 +91 22 27746554/55/56 07045792167 / 68 / 69 water@hanna-india.com, Web: www.hannainst.in

www.facebook.com/HannaInstrumentsIndia/

Balance

USB Flash Drive

FACE TO FACE

We always seek out new technologies and applications to provide tailor-made solutions to the customer : Rushil Shah Shavo Technologies Pvt. Ltd., a part of the Shavo Group with a standing and reputation spanning over five decades, is in the frontiers of niche high technologies cutting across diverse disciplines. The company represents some of the world leaders in their respective fields for technology solutions like static elimination, precision air movement, high quality instrumentation, high purity gas delivery, corrosive gas handling, energy absorption and so on. With a vast product portfolio, the company serves over a thousand customers from diverse key sectors including semiconductor, aerospace, defense, chemical, oil & gas, automobile and so on. In an interview with Mr. P.K. Balasubbramaniian, Mr. Rushil Shah, Managing Director, Shavo Technologies gives a vivid account of his company’s capabilities and Mr. Rushil Shah, Managing Director, Shavo Technologies Pvt. Ltd.

Q. From static elimination solutions to precision air moving products to instrumentation fittings and high purity gas delivery systems, you are dealing in a wide spectrum of products and technologies. What is the common thread in all these? Our endeavour has always been to work in niche high technology areas across industries where we can offer significant value for a variety of problems. Our products and their applications find solutions in a diverse range of industries such as Semiconductor, Aerospace and Defense, Converting, Automotive, Chemical and many more.

ENGINEERING REVIEW

APRIL 2016

commitments to give better value to the discerning customer by leveraging the technologies from the world over. Excerpts:

Q. What are the pioneering efforts you have taken in concept selling? Our core selling concept, which we believe differentiates us, would have to be our deep application knowledge and command over the technologies we sell. For any solution oriented company, this is critical. We have gone from selling component to systems and solutions and turnkey capability in an effort to keep offering better value by leveraging the technologies we provide. Q. Across the board, which are the technologies you would call as cutting edge?

All our Principals have specific technologies that would be classified ‘cutting edge’ considering that almost all our principals are world leaders in their fields. For Static Elimination, we have ‘cutting edge’ integrated power supply ionising bars with full feedback control ( a first in the industry), for Gas Delivery, we have some of the most sophisticated fully automated systems capable of dealing with the most dangerous gases , we offer from HORIBA a multi gas , multi range Mass Flow controller again a first in the industry and many more such products across our range.

www.engrreview.com

ROSS CONTROLS Pneumatic Safety Solutions Achive your Safety Requirements through Lockout/Tagout Compliance Your Simple Solution...... Manual Lockout L-O-X® Valves

• • •

Effective Reliable Efficient

Pneumatic Energy Isolation for Lockout/Tagout Providing a Safe Work Environment While Increasing Productivity and Profitability SAFETY-Related Pneumatics Products: • Energy Isolation

• Safe Cylinder Return

• Load-Holding

ROSS CONTROLS INDIA Pvt. Ltd. Plot No. 113, Ambattur Industrial Estate, Chennai 600 058, India Phone: 91-44-2624-9040 Email: ross.chennai@rosscontrols.com

www.rosscontrols.com

FACE TO FACE Q. Your principals, Gast has been a leader in air moving products. What are the technological innovations they have displayed in recent years? Our journey of working with High Technology Industries has started with Gast which today remains one of the world leaders in Air Motors and Fractional horsepower. Over the years, we have released many new pumps that have extended typical service life to new frontiers especially with the new rocking piston technology pioneered by Gast. Our latest 87 R series offers industry leading pressure performance at lowest noise levels. Q. What’s the challenge in designing and offering high pressure regulators for corrosive fluids? Which are the industries that benefit from these? Corrosive gases are used in a wide range of industries from Chemical, Tooling and the new areas of Nanotechnology, Photovoltaics, etc. Handling corrosive gases requires deep application knowledge, understanding of the materials to be used especially soft goods. Many corrosive gases are also liquefied which need special considerations, from heating to weight measurement, etc. Q. What’s the level of awareness of the ill-effects of static electricity in the industry and the need for neutralization? I can say that the awareness on the causes and cures for static electricity are low in industry but steadily growing. A lot of problems of contamination, material misbehavior, etc., are often

Applied gas delivery systems

ENGINEERING REVIEW

APRIL 2016

isolation with special attention to strategic electronics in the Defense Sector which has some of the most stringent requirements for G force transmissibility.

High quality instrumentation valves attributed to other causes when they really are static related issues. We continue to publish articles and bring awareness to the industry by working with a number of industrial associations. Q. What’s special about the instrumentation valves you offer to say petrochemical industries? Do they require any approvals here from labs like NABL or FCRI? The valves and regulators we supply to the Chemical Industry in general have a wide range of certifications. For valves, we have course type approvals from various third parties like Llyod’s, TUV, DNV, etc. and the products meet all industrial standards and wherever required such as ASTM F-1387, for Oil & Gas , ECR 110 for Automotive NACE, for Sour Service and many more. In fact our Tescom vaporizing regulators, in addition to having ATEX Approval, is the first such unit to have PESO / CCOE Approval from Nagpur. Q. Which are the applications where energy absorption is crucial – I mean where you recommend your Enidine products? Generally of course ‘Energy Absorption’ has applications wherever we need to decelerate motion, in the Industrial space. Factory Automation especially with Pneumatics is the key application, but we also find safety applications such as end stops for large cranes like those found in steel and ports as an important area. Lately our focus has been vibration

Q. Where do your fluid control products go? Our Fluid Control products once again find applications in a very diverse range of industries, but the main would have to be Oil & Gas, Chemical, Analytical and general manufacturing. Q. What’s the significance of ultra high purity gas delivery systems and what are their applications in Indian industry? I believe the growth areas in the Fluid Control Industry lie in Semiconductor manufacturing and Photovoltaics which demand ultra high purity gas delivery systems. Equipment to service these industries is typically made to the exacting specifications of the SEMI code which controls all processes from raw material to manufacturing, testing and even packaging. The surface finish and cleanliness requirements for these industries are extremely demanding often requiring products to be assembled in Class 100 environments. Q. If you take one industry, for instance, you must be offering several products from your basket. As a test case, which are the products you offer to the automotive industry? Our supplies to the Automotive Industry

Shock absorption products

www.engrreview.com

PRODUCTIVITY ACROSS THE BOARD

CENTERLESS CYLINDRICAL GRINDING The centerless grinding machines of the JUPITER series offer significant production benefits: The patented CNC height adjustment of the support rail minimizes tooling times, automatic adjustment of the grinding gap geometry optimizes the grinding process, and the inclined bed guarantees outstanding dimensional accuracy.

Erwin Junker Maschinenfabrik GmbH India Branch Office Office No. 104, City Square 29-2, K.M. Gandhi Path Bhamburda, Shivaji Nagar Pune 411 005, India +91 20 255 33 896 info@junker.in

www.junker.in JUNKER PREMIUM-SERVICE: • Guaranteed servicing • Fast and competent • 24 hours a day, 7 days a week • Worldwide servicing network

FACE TO FACE

Static measurement for effective static neutralization almost cover the entire breath of our product lines e.g. all engine testing for the now EURO IV and Euro VI norms use our Tescom Central Gas Supply Systems for calibration gases. We supply Gast Air Motors almost extensively to all automotive paint kitchens. You will find our Enidine shock absorbers at the end of travel on many assembly lines. Our Meech Jet Stream Ionizing Systems clean & neutralize car bodies and plastic parts prior to painting and our other Fluid Control products find extensive applications in the CNG space and the automotive testing area such as car air bag testing for example. Q. What must be the head count of your customers today? Can you mention some prominent ones? We are fortunate to be working with some of India’s Top Companies such as Reliance, Tata’s, Biocon, GE, Department of Space, Ministry of Defense and many more. I believe we have in excess of 1000

ENGINEERING REVIEW

live accounts. Q. These products are highly serviceoriented. What’s your service set-up? Our service set-up / service team has been growing from strength to strength. We have full service capability at our Pune office and are in the process of building a world class center in our Bangalore Factory. Our service support is a key pillar of the value we provide. Q. How wide is the technology gap that you find in India as a provider of overseas products and technologies? Being in niche areas, I find the technology gap to be considerable but I believe this is largely related to fewer players in this kind of area. But as we all know over the last decade, the technology gap has been fast shrinking and will continue to do so as we see more FDI in Indian Industry. Q. Addition of any more agency lines in the anvil? We have generally been extremely selective and have refrained from having a long line card, preferring a deeper involvement with our current partners to fully exploit their potential, but we have recently signed with Horiba to introduce

Rocking piston compressor

High pressure regulators

APRIL 2016

flow control solutions and we would probably close with 2 more agencies in the Fluid Control area over the course of the next year. Q. What’s your greatest contribution to Indian industry? It would not be correct to say that I have made a contribution to indian industry but the Shavo Group started by my Father, Mr. H.K. Shah is widely recognized as the Indian pioneer in Industrial Pneumatics and we can safely say that we continue to provide new solutions and contribute to the growth of our customers. Q. What are the challenges ahead for you? The economic situation continues to remain strained and we, as an importer, remain under pressure due to exchange rate fluctuations. Also as we offer customized solutions, it is a constant challenge to seek out new areas and new applications to provide our solutions.

www.engrreview.com

FACE TO FACE

3D Printing is unfolding the future of manufacturing industry solution options. Q. What is Imaginarium’s plan to address Skill India opportunity? Imaginarium has been educating industry about 3D printing and wishes to crate a sound 3D ecosystem through focused content and efforts. The 3D driven industry will need a lot of skilled persons in future. We wish to train people in 3D related skills to augment the needs of future through “Imaginarium Academy” and inculcate a maker attitude through our 3D focused “Metamorphosis Café.”

Mr. Guruprasad Rao- Director, Technology & Operations - Imaginarium (India) Pvt. Ltd. Q. What in your opinion is the Impact of 3D printing technologies in manufacturing? 3D printing technologies are a new way of direct fabrication from a digital model, which can impact any manufacturing sector. It will aid New Product development by reducing the development cycle time, they are most preferred or only option to create very complex geometries. Today we see their application in Medical, Engineering, Jewellery, Architecture , Automotive, Aerospace, Foundry, packaging and the list goes on. Q. Do you think it can overtake conventional manufacturing processes? 3D printing has profound impact on future of making things. It can be very disruptive particularly in batch production needs. As of now it appears to be playing a complementary role but is growing so fast, it is difficult predict how early the disruption can happen. Q. How 3D printing can Impact Tool & Die industry? Today Tool & Die industry is the only means

ENGINEERING REVIEW

APRIL 2016

to get bulk production of parts. While Mold is means to get a component, 3D printing can do product without a mold! The Tool & Die industry works on a basic premise of bulk volume production driving lowcost. It becomes unviable for small batch quantities. 3D printing is inching towards filling this gap. Q. What is the future of manufacturing? Future of Manufacturing is Digital Manufacturing that is fully IT enabled data driven manufacturing process with little human error. The Future needs for quick changes in products and in small quantities needs an agile production beyond SMED! 3D printing technologies are of great relevance as they offer agility. They are going to compete in the areas of simple Molds, Jigs and fixtures and component production in a slow but steady way and could be quite disruptive. Q. Does Make in India call push up our industrial produce index? Definitely! It is a challenge to every Indian industry to strive for excellence in their own chosen areas to compete with global

Q. As an emerging technology does 3D printing gets any state support? As of now No, but it can help it grow faster, we look forward to it. The Digital manufacturing industries should form a focus team under the industry associations such as TAGMA /IMTMA / CII / FICCI to push for policy changes or new policy creation. GOI has been working on few recommendations under advanced manufacturing and hope to see some offers to boost the sector. Q. What according to you is the unique advantage of 3D printing over other manufacturing processes? It is the best technology for the fabrication of most complex geometry, which are impossible to make through traditional methods. Aerospace & Medical will see best of such opportunity. They use additive methods, which have less scraps and less demand on energy. They help to produce custom parts with additional tool cost. They help produce pre-assembled parts and save on cycle time. They help produce parts with different material properties in one go. They are best suited technologies for Digital Manufacturing of future.

For more information www.imaginarium.co.in

www.engrreview.com

COVER STORY

Legris India: Innovation in connexions Legris India, a Parker Hannifin group company and a global leader in its core business ie. CONNECTICS and TRANSAIR Aluminium Modular Piping systems offers a complete solution of fluid transmission right from Source to End Application. Legris India supports its clients into Energy saving Piping solutions for Compressed Air, Nitrogen, Vaccum, Inert Gases, & Water. The Company in its capacity offers Complete Utility Piping for all segments of industry like Automobile,Textile, Pharma, Food & Beverages, Electronics,Printing & Packaging and Cement. The Company not only has a wide variety of its product portfolio to offer but also provides Engineering consultancy in designing new pipe distribution system or retrofit the existing one. The Company has got a huge Channel and Service Network all across the country to ensure immediate deliveries and fullfill service commitments. Continuous Research in offering latest technology and delivering a product with the Highest Quality Standard is the commitment of Parker Legris which makes this company Versatile. Mr. Joy Dewan, National Manager-Transair, Legris India

Q. Can you please brief us about international alliances & Legris India global infrastructure? Legris India is a joint venture with Parker Hannifin group. With annual sales exceeding $13 billion, Parker Hannifin headquartered in Cleveland, Ohio is the worldâ&#x20AC;&#x2122;s leading manufacturer of motion & control technologies & systems through precision engineering for a wide variety of mobile, industrial and aerospace markets. The company employs over 58,000 people in 48 countries. Parker has increased its annual dividends paid to shareholders for 53 consecutive years and is just one of the five companies in the NYSE with such a track record. Legris worldâ&#x20AC;&#x2122;s leading brand in pneumatic solutions is headquartered at Rennes France Q. What are the latest initiatives Legris India has undertaken in compressed air systems space?

ENGINEERING REVIEW

APRIL 2016

Which are your focus areas? Legris having a core business as Pneumatics has been constantly working to add more and more range of pneumatic accessories in the current portfolio. Technology upgradations suiting to dynamics of manufacturing is the prime focus of Parker Legris. Q. What are the market opportunities for Legris India products in India? How do you plan to position these products? Legris India has the capacity of providing turnkey solutions in Compressed Air. Opportunity of business is at all industrial market segments like Automobile, Textile, pharma, food & beverages, printing & packaging, mining, electronics or semiconductor and nearly every manufacturing or service segment. Since each product line is linked to multiple market segments a common team drives all the products headed with respective product specialists.

www.engrreview.com

COVER STORY Q. In order to sustain at frontier position, what are the marketing strategies that are applied & will be applied for Indian market? Our marketing strategy is straight forward. We believe in transparent business philosophy. Our proposals are 99% accurate. Our sales team spends quality time in understanding the customer requirements and offers tailor mode solutions to the end user. Over commitment and under performance is not the PARKER LEGRIS way of business. Being a global leader and the oldest in the market we have earned trust of more than 2000 customers in India. Q. Can you please elucidate the contribution of technology innovations in the success of Legris India products? Push in technology was invented in 1969 by Legris which is been followed globally now by other suppliers. On the subject of TRANSAIR: Aluminium Modular Piping, we are there with three different technologies of fittings. Our Scientists and research team strongly believe that a similar technology of fittings cannot be applicable on all diameters having millions of test cycles applied on the product. Our patented software engineering tools are user friendly and help in simulating various combinations of piping design parameters.

www.engrreview.com

particularly for Pharma and Food & Beverages sectors.

Q. Brief us about the quality policy for the business? Parker Legris brand image is built because of years of quality product offerings. When it is to talk about standards,Europeans are always benchmarked. Quality is assured because its not the batch testing but itâ&#x20AC;&#x2122;s the 100% component testing. High grade Aluminum alloy with latest extrusion techniques and following the highest level of standards and certifications Transair product offering is globally the best. Q. Please highlight more about Legris Indiaâ&#x20AC;&#x2122;s top line product range? Is there any new launch or in pipeline stage? We have three product value streamsLegris Connectic Business comprising (pneumatic fittings, FRLâ&#x20AC;&#x2122;s, Blow guns, Ball Valves, PU tubing, couplers) Legris Transair: Intelligent Modular Piping system available in Aluminium and Stainless Steel for compressed Air, inert gases and vaccum applications and Legris Autoline: Instant fitting solutions for fuel circuits, gas recovery circuits and braking assistance on automobiles. Cleanfit connectic fittings is recently been added in our product portfolio

Q. What are the key technological trends that are driving compressed air piping systems industry? Conventional Piping systems have now been turning to new modular systems because of lot of awareness been created by us since last 12 years at various platforms. Gifting Indian market with the latest Aluminium modular piping, Parker Legris has also in one way contributed in saving energy reserves of the country. 100% Leak proofing, reduced pressure drops and consistent quality are the prerequisites from a piping system which off course is driving this market. Q. According to you what is the future of the compressed air piping systems industry? With MAKE IN INDIA as a prime initiative of current governance, Industry is bound to grow many fold, and expansion of current projects is foreseen. No industry can run without compressed air and so piping business has got a tremendous potential. Question is Quality Air with reliability. Conventional Galvanized steel or Mild Steel which has been used since ages is not going to serve the purpose, so Aluminium modular piping is the answer. But be aware! Not all available in the market are the same. Offering a guarantee on papers have to be backed up with strong Quality control and following the stringent standards. Its not a Blue and black combination of pipe and fittings. Q. According you what are the factors affecting to your business? Mindset to adapt conventional and traditional solutions is the biggest barrier to the business. In the world of daily innovations and to remain at par with the industrial standards, every new technology should be adopted.

APRIL 2016 ENGINEERING REVIEW

PROFILE

INTORQ : The brand of reliability

he INTORQ brand stands for reliable brake solutions of the highest standard. Whether in cranes, wind turbines or lift systems – INTORQ products are used in the most diverse of applications. Rely on us to create the right solution for your drive – individually and reliably. With its broad scope of different versions, the modular range of INTORQ products is used in many motors and geared motors and has set standards worldwide. With the establishment of facilities in Shanghai, Atlanta and Pune,

we have also consistently expanded our international presence. So wherever you are in the world, our network of sales and service staff is always close at hand to support you.

INTORQ at a glance • Products: electromagnetic brakes and clutches • Sales volume € 51 million per year • 800,000 units per year • 10,000 m² production area • Development and production in Aerzen • Companies in Shanghai, Atlanta and Pune • 250 employees • 63 sales partners in 49 countries

Product • Brakes and clutches for the sectors of electrical drive technology • High-performance, configurable standard products with a wide operational scope • Customised solutions for demanding applications in terms of technology and cost

For more information Web :www.intorq.com

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

PROFILE

NEC India : The technology expertise NEC is one of the world’s leading service provider in the integration of IT and network technologies that offers diverse solutions for Public Safety (Security and Surveillance), Retail, Private Network Solutions (Unified Communications), Carrier Network, IT Platforms (SDN & Data Centres), Smart Energy and Multimedia to cater to rapidly expanding Indian market.

Mr. Koichiro Koide, Managing Director NEC India Pvt. Ltd

Koichiro Koide is the Managing Director at NEC India Pvt. Ltd. With over two decades of sales and business operations experience at NEC, Koide is responsible for strengthening and expanding NEC’s business capabilities in the Indian market. With his deep knowledge of international sales, he is currently leading the company in its next phase of development in India by leveraging NEC’s innovation capabilities and integration expertise in IT and networking technologies. Koide’s previous roles with NEC include Manager, Overseas Carrier Solutions Division for NEC Corporation. He joined the India team in 2009 as Group Manager, where he was responsible for overseeing international sales and operations for China and Asia Pacific. Koide has an invaluable understanding of the Indian business climate and plans to achieve greater presence for NEC in the ever expanding market. He completed his bachelors in Political Science from the Waseda University, Tokyo, Japan.

EC India Private Limited, a wholly-owned subsidiary of NEC Asia Pacific Pte. Ltd. (NEC APAC) headquartered at Singapore & NEC Corporation headquartered in Japan, was established in New Delhi in August 2006. NEC is one of the world’s leading service provider in the integration of IT and network technologies that offers diverse solutions for Public Safety (Security and Surveillance), Retail, Private Network Solutions (Unified Communications), Carrier Network, IT Platforms (SDN & Data Centres), Smart Energy and Multimedia to cater to rapidly expanding Indian market. To strengthen NEC’s business capabilities in India, NEC works with its customers to introduce new solutions

ENGINEERING REVIEW

APRIL 2016

and services for a ubiquitous networking society. Leveraging on NEC’s unique capabilities in integrating IT and networking technologies for a diverse customer base across governments, businesses, individuals and societies worldwide, NEC customizes solutions to construct large-scale, highly reliable, scalable and flexible IT and network systems for the Indian market. NEC operates through its six offices across India - Mumbai, Kolkata, Chennai, New Delhi, Bangalore and Oragadam.

For more information, http://in.nec.com

www.engrreview.com

EVENT PROFILE

Another feather in the cap of Mr. Om Prakash, Director - In ORBIT Tours Pvt. Ltd.

awarded Exhibition Excellence Award for Outstanding contribution to Trade Promotion

r. Om Prakash – Director, In ORBIT Tours Pvt. Ltd. was honoured with the “Exhibition Excellence Award” for “Outstanding contribution to Trade Promotion” through international Exhibitions all over the world. His contribution of over 40 years has benefitted thousands of Indian industrialists and businessmen to visit international exhibitions all over the world. Such visits help to increase their business by meeting international business partners for Imports/Exports, Joint Ventures, Technology Transfers. It also helps to study and compare their Indian products to match with international standards. Exhibition Showcase organized First Exhibition Excellence Awards successfully on 23rd January 2016 hosted at India Expo Mart, Greater Noida. The event was meant to honour & provide recognition to the champions of Indian Exhibition Industry and inspire the industry to reach greater heights. The initiative was supported by The Ministry of Skill Development & Entrepreneurship, National Skill Development Council, The Indian Exhibition Industry Association, Indian Exhibition Services Association & Indian Industries Association. Exhibition Excellence Awards were held in the presence of Mr. Madan Chauhan, Minister of State (independent charge) U. P. Govt., Mr. J K Sharma, Jt. Commissioner of Police and many other VIPs. Needless to mention that Mr. Om Prakash has received many prestigious Awards nationally and internationally, mentioned below:

44 years of excellent achievements During 44 years of his mission of contributing to Industrial development of India Mr. Om Prakash was awarded many International and National Awards by International Exhibition

ENGINEERING REVIEW

APRIL 2016

Organisors, and International Institutions such as: • INDO-GERMAN AWARD 1985, 1995 & 1999 presented by Dr. Lothar Speath – • Prime Minister (BW) Federal Republic of Germany and for his outstanding contribution in the development of IndoGerman Economic Relations . • AMBASSADOR OF GERMANY IN INDIA by Messe Düsseldorf for his dedicated • service of promotion of Düsseldorf fairs for 30 years. • In 2015 GERMAN AWARD for his dedication of 4 decades promotion of German Fairs by Mr. Michael Siebert, Consul General – Consulate of Federal Republic of Germany. • Government of Texas USA with Honorary Citizenship Award • Ambassador of Goodwill Award by Government of Arkansas USA • Marshal of Oklahoma Territory Award USA China Tourism Ministry’s Top Award 2010 for promotion of China Fairs in India. • India International Tourism Council presented “Lifetime Achievement Award”.

• Lifetime Achievement Award presented by Exhibitions & Events Industry of • India at “Eventuality 2009”. • “Most Influential Person” in the Travel Industry Award presented by • NDTV PROFIT & OTM in February 2014. • India Travel Award 2014 “The Wall of Legends” Award by DDP Group presented by Mr. Parvez Dewan, Secretary Ministry of Tourism, Govt. of India. • “Top 100 Travel Producers Award” presented by NDTV PROFIT & OTM in February 2015.

Appreciations by Prime Ministers of India & Israel • Indian Prime Minister Mr. Morarji Desai who was the Chief Guest at the send-off function of 325 Indian visitors to Drupa 82 held in Germany whole-heartedly appreciated Mr. Om Prakash’s efforts. • The Prime Minister of Israel Mr. Shimon Peres felicitated Mr. Om Prakash in Israel in 1993 for bringing 300 agriculture professionals to Israel. • Mr. Om Prakash was elected as Chairman, Travel Agents Association of India (WR) for 2006-07 & 2007-08.

www.engrreview.com

EVENT PROFILE • Mr. Om Prakash was invited by Britain’s Exhibition Organisors Association at • London to address the Exhibition Organizers regarding promoting of their trade fairs in India. • Invited by Malaysian Trade Fair Authorities to Kuala Lumpur to address the Exhibition Organizers regarding promoting of Malaysian fairs in India. • Mr. Om Prakash was interviewed on BBC TV, Voice of America, German TV and Doordarshan. Mr. Om Prakash is a Rotarian and one of the Founders of Laughter Clubs. He conducts Laughter Club of Worli Seaface in Mumbai

since 18 years. Mr. Om Prakash’s passion to help the Indian businessmen has been his driving force for more than 40 years. He is full time active in his research to identify the Exhibitions worldwide and to present to the Indian Entrepreneurs. He is highly respected by the Exhibition Organisors from all over the world. Mr. Om Prakash thanks them for all their support in arranging: • Technical Factory visits abroad • Arranging meetings with trade associations abroad • Arranging match-making meetings for his Indian trade visitors.

Exclusive Service to India’s Small Scale Industries Special planning of industrial tours for Associations and Individuals are tailor made with a focus on the required industrial subjects. Such tours can include technical study visits, meetings with industry Associations and Chambers of Commerce abroad. Special guidance can also be provided to avail MSME subsidy on such tours. Some important Exhibitions to be promoted in 2016 is enclosed. For more information omprakash@inorbittours.com

CIMES 2016 – The 13th China International Machine Tool & Tools Exhibition

22 – 26 June 2016, Beijing, By Om Prakash, Director – Inorbit Tours Pvt. Ltd.,

IMES 2016 is a truly global machine tool trading and sourcing platform hosted in the world’s biggest machine tool market: China. As Asia’s leading machine tool exhibition for metal cutting tools and CNC machine trade, it also showcases the very latest high-end metalworking and industrial automation technology. In 2016, CIMES will showcase the world’s top industry giants and international pavilions from key manufacturing countries. In order to maximize the ROI for exhibitors and buyers at this Industrial automation exhibition, the organizers will invite an unprecedented array of VIP buyers from key Asian application industries including aerospace and aviation, medical equipment, shipbuilding and new energy. Accurate product segmentation and highly efficient marketing solutions will allow facilitate the establishment of powerful, direct connections with matching business partners. • Exhibition Area(sqm):120,000 • Number of Exhibitors:1300 • Supporting Associations &National Pavilions:30

ENGINEERING REVIEW

APRIL 2016

• Number of Visitors:150,000 • Total Turnover(RMS/million):2840

Exhibit Profile • • • • • • • •

• • • • • • • •

Machine Tool, Tools and Accessories Metal cutting machinery Metal forming machinery Sheet metal and plate processing machinery Metal tube and pipe processing machinery Special purpose machinery Special purpose machine tool Cutting tool, fixture, accessories, parts and components, electrical tools, hydraulic tools, pneumatic devices, abrasives, precision measuring technology and devices Automation and Motion Flexible manufacturing technology and equipment Numerical control systems, embedded systems and servo systems Industrial robots Frequency conversion and timing, sensors and motors Programmable logic controller and related technology Electronic drives and control systems

• Mechanical, hydraulic and pneumonic driven devices • Heat Treatment and Other Technology • Foundry technology and equipment • Forging technology and equipment • Heat treatment technology and equipment • Welding and cutting-off technology and equipment Other Manufacturing • Technology and Equipment • Bearing manufacturing technology and equipment • Gear generating technology and equipment • Mould processing technology and equipment • Other manufacturing technology for the making of auto parts

Highlights for Int’l Visitors: • Source from 3200 pieces of Equipment and Tools, displayed onsite • Factory Visits • New Robot Pavilion and more than 60 technical seminars and workshops

For more information omprakash@inorbittours.com

www.engrreview.com

VIEWPOINT

Union Budget 16-17 - Industry Reacts

“Resolve of the Govt. to ease the process of ‘doing business in India’ is apparent.” Mr. Satish Bhat, Managing Director, Ador Welding Ltd.

Q. The Union Budget 2016 has just been announced. How do you react to it? There are very good initiatives taken in terms of impetus to growth by supporting huge investment in Roads, Railways and Oil & Gas exploration areas. Coupled with that FM has also focused on revival of rural economy by supporting them on various schemes which will also be productive in terms of spend. For instance NREGA’s money will be used for irrigation projects for doubling the farm earnings in next five years. Focus is also on creating rural employment. On the social front, the FM has promised Healthcare to cover all under welfare and health services. The most heartening feature of this budget is that the fiscal deficit target of 3.5% is not being relaxed. This provides for hope in interest rate reduction by the RBI. On the whole the FM has very prudently fixed the mathematics of revenue, expenditure and fiscal deficit keeping growth and social / rural sector in mind. A clear road map has been laid down for reduction in tax rates. Several measures have been announced for reduction in tax litigation and resolving tax disputes. One time window has also been offered to assessees affected by retrospective tax amendment. All the above measures indicate the resolve of the Government towards “Ease

ENGINEERING REVIEW

APRIL 2016

of Doing Business” which gives confidence to foreign investors to invest in India. Q. What are the drivers which will help in accelerating the growth in key sectors? There are good initiatives taken by FM to revive the economy by focusing on investments in a few sectors. Some of the initiatives are: 85 Projects stuck due to various reasons activated; Road construction speeded up; Investment of Rs 97,000 Cr planned; 10,000 Kms of National Highways to be approved for development; 50,000 Kms of state highways to be upgraded. Total outlay for infrastructure Roads + Railways is Rs 2.2 lakh Crore; New Ports/New Civil Aviation sectors are being developed; Public Utility (Resolution of Disputes) bill to be introduced for dispute resolution; New FDI guidelines for infrastructure to be announced; 100% FDI in marketing of food products produced in the country permitted; Marketing freedom to Oil Companies to incentivize investment in deep water, ultra-deep water and high temperature, exploration; Plan to augment investment in Nuclear Power sector is on hand. All these measures will help cement, steel, engineering, railway and mining industry to enable growth, while supporting ‘Make in India’ a dream

of our PM a success. Q. What’s its impact on your industry and business? The Welding business rides on the back of investment in key infrastructure projects. Domestic manufacturing in Defense/ Railways/Ship Repair etc. is expected to improve the demand for Welding products. The government has activated 85 dormant/stalled projects which points out to a serious resolve on the part of the government. Marketing freedom to Oil Companies to incentivize investment, in deep water, ultra-deep water and high temperature, exploration will attract investment in the sector. All the above initiatives will enhance growth opportunities for welding industry. Q. Any flip sides to it from your point of view? If so please elaborate. Investment plans of the Government depend on raising capital from spectrum sale, divestment in insurance and other government and private sector companies, etc. The worry is if the equity markets continue to remain depressed and the Government is unable to raise capital as planned, then it will disturb the fiscal balance leading to slowing down of investment in infrastructure.

www.engrreview.com

VIEWPOINT

Union Budget 16-17 Industry Reacts

“Addresses all major sectors of our economy” Mr. G.K. Pillai, Managing Director & CEO, Walchandnagar Industries Ltd. Q. The Union Budget 2016 has been just announced. How do you react to it? The first reaction to the budget presented is that it is a well balanced budget which addresses all major sectors of the Indian economy with specific focus on the agricultural, rural, social, infrastructure and skill development aspects. Coupled with the government’s other high level policy initiatives like “Make in India”, “Digital India”, “Swacch Bharat”, etc the budget statement lays down a blueprint for ensuring that the fruits of economic development in the future are passed on to all sections of the society in a sustainable manner. In my view, the budget has ceased to be a one-time policy statement in recent times. The government keeps announcing and implementing important aspects of policy on an on-going basis. Also irrespective of the nature of the political dispensation at the helm of affairs in the country, key aspects of the economy like the ones mentioned above would continue to remain paramount in the minds of policy makers and a significant degree of continuity would be seen in budget statements going forward as well. Q. What are the drivers which will help in accelerating growth in key sectors? a. Continuous focus on infrastructure development – necessary for all -round development, growth in the economy, attracting stable domestic and foreign investment

ENGINEERING REVIEW

APRIL 2016

b. Emphasis on manufacturing sector along with development of skills necessary for the same – to generate employment and leverage the demographic that India has. c. Focus on Defence sector which is a subset of point (b) mentioned above – self-reliance and being insulated from the vagaries of the international defence markets. d. Support for Agricultural sector – in the form of minimum support prices, boosting non-agricultural income during lean periods, irrigation coverage and crop insurance. This would automatically drive rural demand for FMCG, Automobiles as well as Consumer Durables. e. Power sector reforms and continued emphasis on renewable energy sources. The dormancy in the Nuclear Power Sector also needs to be removed for sustained capital and technology flows into the country in this key area for energy security. f. Above all , the commitment to ‘Fiscal Responsibility’ would pave the way for a benign interest rate scenario in the coming months, thereby encouraging across the board investments which are so critical to kick-start the economy. Q. What is its impact on your industry and business?

The impact on our industry could be summarized as follows: a. Cement Plant Equipment Business – Cement requirement and resultant

investments in capacity would receive a boost from the overall emphasis on infrastructure development – especially Road development (approx INR 97,000 Cr investment in roads sector in 201617 planned) b. Defence Equipment Business – Defence expenditure is slated to go up sharply by 11% (to almost INR 2.49 Lakh Crore in FY 16-17) over previous year. This along with the on-going focus on ‘Make in India’ in Defence should see significant growth in the economy. c. General Engineering – Measures announced by Govt to kick-start stalled projects as well as overall emphasis on gross capital formation would fuel demand for process equipment, boilers, gearboxes, etc d. Railways – Increased outlays for modernization (total Capex at INR 1.21 Lakh crore), work on freight corridors, etc should fuel demand for mechanical equipment, EPC work which we could target. Q. Any flip side? Please elaborate The budget could have been more forthcoming on specific issues like – a. Clarity on retrospective taxation related issues which has supposedly been an issue with foreign investors though intent to do away with the same was indicated. b. Increasing FDI limits in sectors like Defence (from the present levels of 49%) though this is being considered on a case by case basis.

www.engrreview.com

MANAGEMENT

The art & tact of prospecting By Dr. Jyoti Vora

placed as the fulcrum of enhancing business

Here are simple mantras which would help you to master the concept of Prospecting: Be consistent and make Prospecting a habit:

by getting profitable customers. Naturally,

Prospecting is the art of opening new

the first big challenge would be to reach out

relationships. The new business opportu-

to the right individuals. To successfully find

nities that later turn into sales are initially

new prospects for one’s products and ser-

identified through prospecting, making it

vices, one needs a hard-working prospect-

the lifeblood of sales.

he search for potential customers or buyers is the initial magical step in the sequence of events of a successful “Sales Story” and can be

ing program that reaches out to qualified prospects and moves them through the

Turn Off the Distractions and Focus:

sales cycle from cold to warm to hot. The

Tell your friends you have a new found

strategic program must incorporate a range

discipline and that you need their support;

of marketing tactics that, over time, bring

promise to catch up with them later.

prospects incrementally closer to a decision

choices. It comes down to what you are

to sustainably connect to you.

saying when you prospect. Hence, being well rehearsed is a precursor to success. One

izations you’ve identified as well-qualified

PROFILE YOUR CUSTOMER BEFORE YOU PROSPECT

but that have little or no awareness of your

UNDERSTAND THAT:

before convincing anyone else.

advertising, public relations, cold calling and

EAGER : Will buy when offered

Focus on the Outcome:

networking.

INTERESTED : Will buy, but will shop for

Effectiveness in prospecting is improved

the best

by simply focusing on the outcome. One

begin networking within select groups

ATTRACTED: Will need persuasion

should be able to define concisely the objec-

where you’re likely to come into contact

NEUTRAL: Will need clear and effective

tive one moves out to achieve.

with members of your target audience.

presentation

Cold prospects are customers or organ-

has to be convinced about one’s product

company. They can be reached through

To round out your efforts to reach them,

This will help you consistently maintain

NEGATIVE: May buy on impulse

ongoing contact with warm prospects-com-

Even when you use all of the ideas above,

panies and individuals with whom you’ve previously spoken or met. Initiate a directmail campaign to make frequent contact with your database.

you are still going to hear “No”. Your

Use Every Method Available and recognize the gamut of human qualities:

consistent and relentless pursuit of your dream clients is part of a longer-term plan for success and not a quick fix.

Hot prospects are the ones you’ve suc-

If you are great at cold calling, you should

cessfully moved through the first two stages

absolutely focus on cold calling. But that

of your sales cycle. When your marketing

doesn’t mean that you should never use

program has brought them to this point,

email marketing, inbound marketing,

Hence, here are the Ten Commandments of ‘Successful Prospecting’ – ten ‘Ps’:

you’ll need to get personally involved to

networking, trade shows and conferences,

1. Preview

supply the “heat” to close sales.

direct mail, social networking, or referrals.

2. Plan

You should include all of these tools in your

3. Prepare

arsenal.

4. Prelude

Since prospecting is really about astute and accurate understanding of human nature, it is more about tact and is actually a

Nurture Relationships Over Time:

5. Present

scientifically oriented Art which gets better

Essay your ideas:

6. Persuade

if you approach it with strategy. The most

Two things cause poor prospecting results.

7. Persevere

significant aspects in this exercise is courtesy

The first is not spending enough time pros-

8. Persist

and politeness as well as a sterling sense of

pecting. The other is ineffective prospect-

9. Pamper,and

ethics.

ing. This mostly comes down to language

10. Finally Practice the Art till you Perfect it!

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

BE DYNAMIC!

THE FUTURE OF EFFICIENCY & SPEED IS HERE – MASTERCAM’S DYNAMIC MOTION TECHNOLOGY Since 2008, Mastercam has been building Dynamic Motion into our software. That means it has been shop-tested and proven in real-world environments. Dynamic Motion toolpaths carve out massive amounts of material quickly, reducing cycle times by up to 75% – while doubling and even tripling the tool life – immediately putting more money in your pocket. Sounds unbelievable, right? But as the market leader, we’ve had our Dynamic Motion toolpaths tested in most every conceivable work environment around the world. It works.

For more information, visit www.Mastercam.com 800-228-2877

TECH TRENDS

Robotics in machine tending

Part stacking magazines for various types of components. Mr. Arjun Prakash- Managing Director Effica Automation Ltd has acquired foundational skills and education in mechanical engineering, electronics and computers to pursue his passionfor robotic automation.

he advent of continuously falling prices in electronics and power electronics combined with the ever increasing cost and scarcity of labour has certainly pushed us into the age of robotics. The fact that China, a country where all economic factors were identical to that of Indiaâ&#x20AC;&#x2122;s in the 1980s and a country that was known in the past decades as

the worldâ&#x20AC;&#x2122;s manufacturing hub due to its low labour costs, is today also the worldâ&#x20AC;&#x2122;s largest consumer of industrial robots. This itself is a proof that we have already entered the age of robotics. They say people should think and machines must work. The youth of our country certainly have great aspirations and a job as menial as pick and place certainly does neither inspire them nor provide enough value addition to the end product to justify a fat paycheque. This is where robotics fits in with machine tending. Most CNC machines installed in India are typically used for mass production where a few variants of the same type of part are manufactured for long periods of time with

no changes in design or dimensions. A CNC machine operator typically even with some knowledge of programming the machine is reduced to the task of loading the machine and unloading the machine. This is certainly a waste of talent. Robotic machine tending Robotic machine tending is the process of loading and unloading components for all types of industrial machines including CNC machining centers. The greatest advantage that is derived in the Indian context is the increased uptime from the CNC machine. Industrial Robots are generally not much faster than the human counterparts when

Multiple CNCs machines can be handled based on cycle time.

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

TECH TRENDS

components have to be emptied time and again. Since robots programmed to pick or place the component at fixed location within a few microns accuracy and with the correct orientation to grip, the part stacking magazines need to be designed in such a manner that they accommodate the part. This can often be a challenge with castings and other molded products where flash is a hindrance. The shape of Burr can sometimes be a serious the product is also a consideration where hindrance to automatic machine tending. it is not possible to stack in the correct gripping orientation with good volumetric they are timed on a single operation. But efficiency of stacking. This is important practically when you factor in human as robots have a predefined reach. The fatigue, refreshment breaks, inefficient other big hindrance can be the presence night shifts and absenteeism in India, of burr after the machining operation. Robot users experience as much as 30 Burr is normally cleaned using a hand percent increase in machine uptime. operated air gun manually. This can of In projects where one robot caters course be automated by fitting an air jet to 3 CNC machines, this is equivalent of on the robot, but the cycle time lost due getting one more CNC machine. With to that should be kept in mind. If there is robotic machine tending solutions in a possibility to fit permanent air nozzles India falling below CNC machine prices, close to the chucks and fixtures inside the this translates to instant breakeven from CNC, where burr is typically a hindrance machine uptime alone. The manpower to the process, then it should be preferred. savings is completely a bonus. This is But sometimes even this does not solve of course only true when factors like the problems. In some types of steel and machining cycle time, CNC machine cost, aluminium burr formation is often long payload and required reach permit it, coils and this gets stuck in chucks and but in most cases a major portion of the fixture where heavy force is required to breakeven is achieved from the machine clear it. This should be solved either by uptime alone. But of course this does tool geometry design (Chip breaking not mean that implementing a robotic inserts) or by poke-yoke deflectors before machine tending project is as simple as the machine tending project is taken writing out a cheque. There are many up.Gripping in CNC machine tending is technical considerations that need to a straight forward process most of the be given careful thought and analysis. time. Various types of two jaw and 3 jaw First, if a robot loads a grippers are available. 3 CNC machine without jaw grippers are suitable human intervention, for ID and OD gripping then we need to have and 2 jaw grippers a part stacking system are suitable to hold so that the robot can long shafts. But again operate at least a few casting burr will lead hours without human to improper centering presence before in 3 jaw grippers. This the entire stack is is a problem when replenished again by a the chuck center does human. The same hold A typical compliance unit to compensate not align with the part for component offset with respect to true at the unloading center. Even if sufficient chuck side, where machined clearance is provided

ENGINEERING REVIEW

APRIL 2016

A complete robotic cell tending to two CNC turning centers. in the chuck opening , enormous forces are subjected upon the robot wrist as the robot tries to resist the pulling related to the offset. This can be overcome using an offset compensator device. Other considerations : Other considerations to be factored in are to ensure the safety of human operators. Since robotic accidents can even be fatal, it is important to completely cordon off the area with safety fences. Despite this, human access will be required, in the form of refilling and emptying magazine stacks. CNC machines also require frequent tool offset resetting and other minor changes. Doors and other openings need to be interlocked with safety switches and sensors. Conclusion : Finally having invested a great deal on the CNC machines and the machine tending project, it is always good to give some more thought to optimize the areas that tend to slow down the entire process. Non-machining activity like door open / close, chuck open close and where applicable tail stock and other accessories must be optimised for automatic operations and their speed can be considerably increased as sensors can be used to interlock their operation and prevent collision. The process of tool offset resetting should also be automated where it is very frequent, as no human should be present in an automated cell with 2 or 3 CNCs and one robot, or else the entire cell will come to a standstill while fixing one machine. For more information editor@divyamediaonline.com

www.engrreview.com

2016_04 Engineering Review.pdf 1 22/02/2016 16:45:03

Linear solutions global provider.

CMY

Linear Line Telescopic Line Actuator Line

ROLLON India Pvt. Ltd. - INDIA 1st ďŹ&#x201A;oor Regus Gem Business Centre 26/1 Hosur road, Bommanahalli Bangalore 560068, INDIA www.rollonindia.in - info@rollonindia.in

Rollon is a global provider of linear motion solutions for several industrial sectors, such as: industrial machines, railway, automation, packaging and logistics, aerospace.

ENGINEERING REVIEW |

87 | April 2016

TECH TRENDS

TNC 640 with new features By Abhilash Tripathi, Associate Director (Sales & Service), Heidenhain India switching over.

The new 3-D simulation graphic: displays that are rich in detail focus on undesired effects.

ince its market launch, the TNC 640 has increasingly been becoming the first choice for high-end controls with efficient and highly precise milling operations. Why? Because it makes milling so simple, because HEIDENHAIN has expanded its functions in a practical, user-friendly way with a keen sense of workshop needs, and because in addition to milling it also enables turning on the same machine. The new features of software version 4 currently being dispatched for the TNC 640 range from the programming and simulation of operations directly on the machine to setup and configuration, as well as many machining functions. This makes milling even more simple, safe and precise. Operators also program for turning operations just as simply as for milling. The TNC 640 masters both forms of machining without complex

ENGINEERING REVIEW

APRIL 2016

3-D simulation graphic with a host of benefits The most extensive new feature is certainly unique, true-to-detail 3-D simulation graphic functionality. This helps the HEIDENHAIN TNC 640 operator to identify missing information or inconsistencies in the program prior to machining, and without any risks to workpieces, tools or machines. It displays the workpiece at random viewing angles and simulates both milling and turning operations in a single view. Not only cuboids are displayed but also cylindrical forms such as cylinders, tubes and rotationally symmetric blanks. During simulation, several new view options expose a precise and freely selectable view of details. The graphic simulation is so detailed that the machine operator is able to identify undesired machining effects from NC programs, such as sub-standard surfaces, at an early stage. With maximum 3-D simulation resolution, the control can also display the block end points with corresponding block numbers in the display of tool motion as a 3-D line graphic. With externally created NC programs generated with CAM systems this facilitates the analysis of point distribution and pre-evaluation of the expected surface. The operator can choose to view only the workpiece, only the tool paths or both simultaneously. Views also enable display of the original workpiece blank dimensions as a frame with highlighted main axes, or with the workpiece edges as lines for improved spatial perception. The â&#x20AC;&#x153;transparent workpieceâ&#x20AC;? view option also enables a view of inside machining, even with rotationally symmetric workpieces. Color

www.engrreview.com

TECH TRENDS

Turning and milling in a single setup: the TNC 640 alternates between machining modes as desired according to the program. highlighting of the workpiece with a new color used for each new tool helps the operator to identify individual work steps and makes it easier to assign the tools used. The operator can also display the tools either completely or transparently and of course hide these at any time. Several advantages are provided for the operator by 3-D simulation on the TNC control. For example, he can rapidly and simply run through machining programs created on the machine. But simulations on the control are also highly useful from programs he adopts from CAD/CAM systems, because the 3-D simulation graphic of the TNC 640 takes into account the kinematics model saved on the control, optimally modified

Achieving maximum contour accuracy and surface quality machining without (above) and with Advanced Dynamic Prediction (below)

ENGINEERING REVIEW

APRIL 2016

according to the actual machine tool geometry, to realistically simulate machine movements. Milling and turning in one setup Does your workpiece, after complex milling operations, also have to be set up on a lathe for further machining? Here the TNC 640 helps you to save a great deal of time! A milling/turning machine equipped with the TNC 640 machines the workpiece in one run, combining milling and turning in any sequence. For this purpose, the control simply alternates between turning and milling mode according to the program and completely independent of the machine and axis configuration. During switchover, the TNC 640 assumes all necessary internal changes (such as switching to diameter display, or setting the datum in the center of the rotary table), as well as machine-dependent functions (such as clamping the tool spindles). In this way the TNC 640 not only saves space as well as money for an additional machine, but thanks to doing all operations on a single machine, it also avoids inaccuracies possibly caused by workpiece rechucking. The operator can create turning contours as usual in the HEIDENHAIN plain-language dialog, and he also has contour elements such as recessing or thread undercutting as well as cycles for turning shoulders, recessing, contour

www.engrreview.com

TECH TRENDS

Always supplying the right values: the context-sensitive cutting data calculator of the TNC 640

machining and thread machining. He can also use FK free contour programming to easily create contour elements or simply import contours in DXF format with the help of the DXF converter. In more sophisticated contour turning cycles, the TNC 640 uses the same techniques as used for milling. Here, too, there is no need for the TNC programmer to learn new ways of programming he build on what he already knows and quickly find his way into the world of turning on a milling machine. Another highlight of the TNC 640 is the blank form update feature. Based on the defined blank, the control calculates the newly created intermediate product with each step to adapt the following machining cycles accordingly. This avoids air cuts and optimizes approach paths.

feature (ADP) expands the previous look-ahead of the permissible maximum feed rate profile, thereby enabling optimized motion control of the feed rate axes with 3-axis and 5-axis milling. In this way, clean surfaces can also be milled with short machining times on contours characterized by strong point distribution deviations in adjacent tool paths. The control dynamically calculates the contour in advance and can therefore use acceleration-limited motion control with smoothed jerk to adapt the axis velocity at contour transitions in good time. ADP shows its strengths for example during bidirectional finish milling through symmetrical feed behavior on the forward and reverse paths as well as through particularly smooth feed rate curves on parallel milling paths.

Optimized motion control for clean surfaces and perfect contours An insufficient quality of data in NC programs frequently causes an inferior surface quality of the milled workpieces. The Advanced Dynamic Prediction

Fine tuning with attention to detail The TNC 640â&#x20AC;&#x2122;s quickly understandable user interface ensures an even better overview during programming and setup. The individual screen areas are clearly distinguished and the operating

ENGINEERING REVIEW

APRIL 2016

modes are indicated by unambiguous symbols. Value inputs, comments and syntax elements are color-highlighted, and error messages are categorized with colors according to importance. The latest software version 4 simplifies program creation and input of technology data on the TNC 640. With the context-sensitive cutting data calculator, the operator can calculate spindle speed and feed rate for the specific machining process and transfer these values directly into the open feed-rate or shaft-speed dialog. The calculator recognizes the open dialog window and automatically asks only for the required input data. Face milling cycles, of course, have long been a part of the performance range of HEIDENHAIN TNC controls, although this does not mean that familiar features cannot be improved. For example, a new face milling cycle enables the definition of up to three sides for limiting face machining on side walls or shoulders. For corners between by adjacent sides, even the corner radii can be specified as desired. Faces can be milled with various machining strategies: meandering, line-by-line (with or without overrun) or helically. Operators can also specifically define the machining direction, for example for directing the operating pressure against the fixed vice jaw. In addition to such expansions and optimizations, many other detailed improvements have also been integrated that are too extensive to describe here. The new software version 4 for the TNC 640 converts a wide range of customer requirements into workshop-oriented solutions.

www.engrreview.com

CASE STUDY

» MACHINE TOOLS

Primo™ twin probe system : A revolutionary product

Mr. Ashok Mungale from Universal Manufacturing Company (Unimac) has been using Renishaw probing technologies for the past ten years and is a highly satisfied client of the UK-based company

he Pune-based Universal Manufacturing Company (Unimac) has consistently reduced inspection time by 90% over four months after installing a Primo™ twin probe system, designed for on-machine part setting, part inspection and tool setting. Unimac manufactures components for railway engines, power generation plants, cement manufacturing plants, and other heavy engineering applications. For Unimac, maintaining accuracy of 15-20 microns on large parts is vital. A major challenge for Unimac has been the inspection of large parts during the manufacturing process. According to its Director, Mr Ashok Mungale, “The issue was resolved five months back when

ENGINEERING REVIEW

APRIL 2016

Renishaw’s Primo system was installed on the machine, based on application requirements. The on-machine probe is not only easy to use, but performance driven, which has resulted in increased machine utilisation time. Renishaw has truly been instrumental in our growth by providing an outstanding probing system that helped shorten our cycle time.” Innovative probing The Primo twin probe system consists of a Radio Part Setter and a Radio 3D Tool Setter. It enables automated on-machine part setting, part inspection and tool setting, helping to eliminate manual setting errors, improve accuracy and part conformance,

whilst reducing non-productive time and scrap. All of which increase productivity, improve quality and boost profits.The Primo system is straightforward to install and use, and represents a low initial financial outlay. It also has an exclusive, enhanced warranty to offer users peace of mind. Up and running in a day It is so easy to use the Primo system that at Unimac its installation and evaluation were completed on the same day. The Primo GoProbe training kit and pocket guide make it very quick to learn and implement the system. A key benefit is that there is no need for extensive G-code knowledge.

www.engrreview.com

safe save safe power...safe data...safe operation...save money

Lightweight, durable and energy-efficient: low-friction P4 rol e-chainsystems速 for 57% less drive energy consumption + Easy to install and corrosion-free modular aluminium-guide troughs for less system weight + High-speed data transmission with rugged chainflex速 fibre optic cables + Easy PPDS 2.0 condition monitoring system for push-pull forces to prevent downtime.

plastics for longer life 速 igus 速 (India) Pvt. Ltd. 36/1, Sy. No. 17/3 Euro School Road Austria Belgium Brazil Canada China Denmark

+43-7675-40 05-0 +32-16-314431 +55-11-35314487 +1-905-7608448 +86-21-51303100 +45-86-603373

/cranes

Dodda Nekkundi Industrial Area - 2nd Stage Mahadevapura, Bangalore -560048, Karnataka, India France +33-1-49840404 Germany +49-2203-9649-0 Great-Britain+44-1604-677240 Italy +39-039-5906-1 Japan +81-3-58192030 Malaysia +603-7880 5475

Phone Fax

Mexico +52-728-284-3185 Netherlands +31-346-353932 Poland +48-22-8635770 Portugal +351-22-6109000 Singapore +65-64871411 South Africa +27-11-312-1848

+91-80-45 12 78-00 +91-80-45 12 78-02

South Korea +82-32-8212911 Spain +34-936-473 950 Sweden +46-42-329270 Switzerland +41-62-3889797 Taiwan +886-4-23581000 USA +1-401-4382200

CASE STUDY

» MACHINE TOOLS

A Primo system was installed at Unimac five months ago, following a process audit

Amazing 90% reduction in inspection cycle time on turbocharger housing

Simple, single line commands are used instead of multiple lines of code, removing the necessity for any special training.

components, for its customers. Before the Primo system was installed, the cycle time for machining a turbo charger housing was 46 hours. During this process, at the semi-finished stage, the part would be taken to an inspection facility to be checked for flatness, squareness, parallelism and positional accuracy. The part would then be brought back to the machine, and have to be realigned and set before further machining could take place. This process would take three hours and have to be carried out twice, meaning that the machine lay idle for six hours during each manufacturing cycle. In this manual process, part setting itself takes 30 minutes. The Primo twin probe system enables inspection to take place on-machine, removing the need to breakdown and move the part, and reset it once it has been inspected. Now at Unimac, the new process takes just 30 minutes, has reduced inspection time by 90%, reduced cycle time by 12% and led to a very fast return on investment (ROI) in just four months.

Unimac, the company Mr Mungale started Unimac in 1987, after purchasing a second-hand machine from Germany for manufacturing components needed in sugar and cement plants. He later switched to manufacturing general engineering components. Currently, the company manufactures large precision parts used for railway engines, power generation plants, cement manufacturing plants and other heavy engineering applications. The company has its own tool room, horizontal boring machines, floor boring machines, HMCs and VMCs. One of the VMCs has a bed size of 4.5 m x 2.75 m. Making a difference Unimac manufactures precision components, such as turbo chargers that are used in railway engines and one-off single

Primo – twin probe system

ENGINEERING REVIEW

APRIL 2016

Optimising throughput Mr Mungale said, “After installing the Primo system, the manpower cost, material handling costs, material equipment and power consumption charges are saved so no additional investment is required. This gives flexibility to the manufacturing unit in accepting orders for any size and for segments such as the machine tool industry. The manual analysis of results is also avoided, as the data is available on the same controller. It’s an amazing experience to use Renishaw machine tool probes, which are being used by us for the first time.” “Another advantage of the Primo system is that it combines part set up, part inspection and tool setting capabilities in one system so there is no need to source separate items. The Primo system is definitely worth recommending for every engineering industry.” Building trust : Unimac first heard about Renishaw when ten years ago it purchased its CMM, which came fitted with a Renishaw probe. Following this, Unimac formed a relationship with Renishaw, and received regular updates about new product developments. Renishaw engineers analysed all of the machining applications at Unimac thoroughly, and offered best practice advice and guidance on which Renishaw products would be most suitable for Unimac’s needs. The Primo system is the company’s first machine tool probe. Mr. Mungale concluded, “Since we were convinced with the sales, service and application aspects of Renishaw, we installed its telescoping ballbar to help maintain machine accuracy. After this, it was easy to ascertain whether the fault was during machining and the errors could then be eliminated. Results from the ballbar are always perfect so a mutual trust has developed between Renishaw and us”.

For more information www.renishaw.com

www.engrreview.com

TECH TRENDS

» AUTOMATION

27 times more reliable: igus offers the largest selection of ethernet cables for moving applications The entire product range with seven price points allows users to always select the perfect cable

gus has further expanded its range of Ethernet cables for use in energy chains and now offers 27 different cables at seven price points. With the largest global portfolio of Ethernet cables for moving applications, igus offers its customers the right selection for any application. All cables at igus are available from stock in 24 hours, with a 36-month guarantee for durability and no minimum order quantity surcharge. Due to increasing automation in production processes, the volume of data that needs to be transmitted between individual functions is also increasing. Movement also plays an increasingly important role in modern production processes. For this reason, specially designed cables must be used. “Since requirements differ between applications, we are offering a complete product range of Ethernet cables specially designed for moving applications”, explains Rainer Rössel, Manager of the chainflex business area at igus. “No matter what the required mechanical and electrical performance, users can count on reliable, tried-and-tested cables and select the most affordable cable from our product range that will work in their application. This includes anything from transmission standards CAT5 to CAT7 or from simple linear to complex three-dimensional movements. Even applications with particularly high torsion forces can be fulfilled, which means we have a suitable Ethernet cable for virtually any situation.” The igus product range includes a total of 27 cables, from the affordable chainflex CF888 with a guaranteed service life of up to five million strokes, right up to the new chainflex CFROBOT8.052, the first robot cable that complies with the CAT7 standard. As is

ENGINEERING REVIEW

APRIL 2016

igus offers the largest product range of Ethernet cables for moving applications with 27 different types. (Source: igus GmbH) promised for the entire CFROBOT product range, igus guarantees a durability of five million torsional movements. Special design for optimum service life In situations where cables are fitted in static installations, commonly used Ethernet cables get the job done. But the service life of these cables is severely restricted when used in moving applications. The bus cables, developed by the motion plastics specialist igus, are always optimised for movement to provide the best possible transmission properties. The cables for linear movements are stranded with optimised strands and are available in six different jacket materials (from PVC to TPE), depending on the quality required. For cables from the CFROBOT product range, the components within the cable are guided loosely so that the cable can move safely when the wires and shielding twist together and apart. To demonstrate that these special designs and materials prove themselves in real-world applications, igus inspects all cables at its 2,750 square metre in-house test laboratory by

conducting more than two billion test cycles per year. Aside from electrical resistance values, which are determined using the specially designed AutΩMeS system from igus, these test sequences are also used to continuously monitor Ethernet-relevant values. The reason this is done is that the data transmission quality of the cables can cause significant problems over long periods of movement if the cables are poorly designed or manufactured. Thanks to the continuous tests that igus conducts, customers can be certain that chainflex cables will work for the duration of the guaranteed service life.

ABOUT IGUS : The igus GmbH is a world`s leading manufacturer in the field of energy chain systems and polymer plain bearings. The family-run company is based in Cologne, represented in 29 countries and contracts 2,200 employees worldwide. In 2012 igus generated a turnover of 399 million Euro. igus operates the largest test laboratories and factories in its industry to offer customers innovative and tailor-made products and solutions within the shortest time. The terms “igus, chainflex, readycable, easychain, e-chain, e-chainsystems, energy chain, energy chain system, flizz, readychain, triflex, twisterchain, invis, drylin, iglidur, igubal, xiros, xirodur, plastics for longer life, manus, vector“ are legally protected trademarks in the Federal Republic of Germany and, where applicable, in some foreign countries

For more information Web: www.igus.in

www.engrreview.com

TECH TRENDS

» AUTOMATION

Increasing demand for embedded and “Customised Solutions” from HARTING Customers call for added value / target long-term business relations

T High speed in a very compact form: HARTING Integrated Solutions (HIS) brings high transfer rates for signals, data and power to PCBs.

he HARTING Technology Group’s embedded solutions are important components in the implementation of Industry 4.0. The demand for these solutions is growing steadily. “The developments we saw in a few months were a pleasant surprise: business developments to date give us good reason for optimism,” explained Holger Heidenblut, Sales and Application Support HIS, and Robert Pulman, European Products Applications Manager, at a meeting at HARTING for trade journalists. “Embedded” means more than just “minimise” – far more, the incorporation of a very wide range of technologies and engineering competence into one marketor customer-oriented solution is what really matters, as Holger Heidenblut went on to explain. As a part of the HARTING Technology Group, HARTING Integrated Solution (HIS) draws on existing standards and components, but above all, on its know-how. For example, HIS is bringing high transfer rates for signals, data and power onto PCBs and integrating complete solutions for customers. Time-to-market, as well as cost-optimised approaches are paramount here. As

HCS solutions: As specialists for automation, machine construction, traffic, transportation and renewable energy engineering and products, the specialists “refine” the HARTING products, developing and manufacturing tailored solutions delivering greater customer benefits.

100

ENGINEERING REVIEW

APRIL 2016

a member of diverse organisations such as PICMG® and VITA®, and also based on the unit’s expertise, the “Embedded Solution” team is your first contact point. The service range extends from design to development and verification all the way through to manufacturing. “Based on our know-how in the engineering, verification and production areas, we want to stand out from competitors on the market. Customers are demanding such tailor-made embedded solutions. We have also experienced this as a strong trend in our backplane-based solutions for several years,” says Heidenblut. The “Customised Solutions” product and services portfolio is also creating decisive added value for customers. This includes the development, production and assembly of individual, customer specific solutions, such as cable assemblies and as well as products and complete solutions modified to match customer requirements. “We go beyond standards and thereby boost customer benefits,” as Danny Maijinckx, Business Development Manager EMEA at HCS emphasises. As specialists for automation, machine construction, traffic, transportation and renewable energy engineering and products, the specialists “refine” the HARTING products, developing and manufacturing tailored solutions delivering greater customer benefits. “In this way, customers become partners,” Danny Maijinckx relates. HCS products are sold and distributed across the established sales channels.

For more information www.HARTING.com

www.engrreview.com

HOW DO I KNOW IF I’M TALKING TO AN ENGINEER OR A SALESMAN? Ask Smalley. We have nothing against sales people. But when it comes to differentiating Inconel from Elgiloy or overcoming dimensional variations within a complex assembly, wouldn’t you rather work with an engineer? Our customers would. That’s why they collaborate directly with our world-class team of Smalley engineers—experienced professionals whose only focus is helping you specify or design the ideal wave spring, Spirolox® retaining ring or constant section ring for your precision application.

Smalley wave springs reduce spring operating height by 50%, saving space and weight, fitting tight radial and axial spaces. We offer more than 4,000 stock sizes in carbon and stainless steel.

Visit smalley.com for your no-charge test samples.

Smalley Wave Spring

Coil Spring

THE ENGINEER’S CHOICE™

TECH TRENDS

Âť MACHINE TOOLS

Machining group believes in a Haas future

ased at Flagogna, near the town of Udine, in the mountainous region of northeast Italy, HPF SpA is part of AmiL Srl, the holding company of the Lualdi family â&#x20AC;&#x201C; owners of successful manufacturing businesses operating in sectors such as medical, aerospace, and automotive, since 1945. HPF specialises in the production of hot forged, thermally treated and machined metal components. Its machine shop is being rebuilt around the latest Haas CNC machine tools. As well as producing OEM products for markets such as medical and veterinary, HPF also machines parts on-demand for the aerospace, automotive, and power generation sectors, typically from materials such as titanium alloys, cobalt-based alloys, stainless steel, precipitation hardened steel, and aluminium alloys. The company also has a busy R&D department, where product development, evaluation, and testing take place. HPF uses its Haas machine tools for R&D and production tasks. Among the models on site (acquired from local HFO, RF Celada Macchine Utensili SpA) are two VF-2SS Super-Speed vertical

Continue on page no.106 102

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

ANTRIEB

DER

Getriebetechnik ■ ■ ■ ■

The

Starke Lagerung Geräuscharmer Lauf Korrosionsschutz (AL) Hohe Leistungsdichte

Gear Unit

■ Strong bearings ■ Low noise ■ High power density

■ Reliable ■ Versatile ■ Global

Motorentechnik

Steuerungstechnik

Alle Efﬁzienzklassen Weitspannungsbereich (380-420V) ■ Auch als Brems - oder ATEX-Variante

■ ■ ■ ■

■ ■

The

Motor

■ High efﬁciency ■ Global Standards ■ All operating conditions

Alle Umgebungen Schutzklasse bis IP69K Flexible Schnittstellen Skalierbare Funktionalität

The

Drive Electronic

■ Compact design ■ Easy commissioning ■ Scalable functionality

Wide power range – Versatile system solutions – High system efficiency

DerAntrieb.com NORD DRIVESYSTEMS Pvt.Ltd. 282/2, 283/2, plot no. 15, Village Mann, Taluka Mulshi Adj.Hinjewadi MIDC-II, Pune- 411057 Maharashtra INDIA Toll Free No. 1800 200 2042 India@nord.com, www.nord.com Member of the NORD DRIVESYSTEMS GROUP

DRIVESYSTEMS

Interface

Highest degree of variability. For each application purpose.

MENNEKES Electric India Ptv. Ltd. No. 2 D, Dhanakottiraja Street Ekkattuthangal 600 097 Chennai – INDIA Tel. 044 222 535-61 / -62 / -63 Fax 044 222 535-65 | info@MENNEKES.in

“AMAXX DUO provides switched and interlocked safety as multiple distributor.”

TECH TRENDS

» MACHINE TOOLS

Continued from page no.102 machining centres, a pair of VM-3 vertical mould-making machines, a VF-2 vertical machining centre, and four SL series lathes, including an SL-20T model. “We buy Haas CNC machine tools because they offer a good price-quality ratio,” states technical director, Marco Zappa. “The machines in the R&D department run for 8 hours every day; we try not to let them stop. If there is a gap in our R&D work, we load them with smallbatch production to avoid idle time.” In the production area of HPF, the Haas machines work 15 hours a day, six days a week, which will help fuel company growth of 25 to 27 percent in 2015, with

106

ENGINEERING REVIEW

APRIL 2016

a further 20 percent expected in 2016. “We must invest wisely, and we are trying to standardise on machine tool brands, because we currently have seven or eight different ones, and that is not good,” says Mr. Zappa. Haas machines are also in use at another AmiL group company: Lima Corporate (AmiL is Lima spelt backwards), a world-renowned specialist in reconstructive orthopaedic solutions that include large joint implants for hip and knee systems. Due to the typical complexity of such products, the Haas machines already in place at Lima include a UMC-750 fiveaxis universal machining centre, and an ST-20Y CNC lathe with Y-axis. “Recently, we carried out an analysis to determine the best brand,” explains Mr. Zappa. “We discovered that Haas is the machine that gives us the best price-quality ratio, the best accuracy, and the best technical capability – plus, the support from HFO-Celada is excellent! Our intention, therefore, is to continue with Haas, and to eventually standardise our machine shop, to make things simpler and more efficient. Haas offers such a wide range of CNC machine tools, there’s a suitable machine for everything we do currently, and everything we aspire to do in the future.” For more information Web: www.HaasCNC.com

www.engrreview.com

ENGINEERING REVIEW |

107 | April 2016

TECH TRENDS

» MACHINE TOOLS

Rollon actuators for food packaging systems

TECHNICAL FEATURES INCLUDE: • A 50 x 50mm 6060 aluminum profile • A maximum stroke of 6.000 mm • A repeat accuracy of 0.1 mm • Sizes from 30 to 100 mm • Speeds up to 4 m/s • Accelerations of up to 50 m/s2 • A carriage weight of 0.56 kg • High bending moments • High load capacity of 14,560 N for theoretical,1,747 N for permissible • Low friction of 0.01

Pactiv redesigned and replaced its original pneumatic system with a servo-driven system using Rollon’s E-Smart 50 actuators. The updated system lets engineers control the timing and speed of the diversion.

activ, one of the world’s largest producers of food packaging, recently found a good way to improve the productivity of its multi-line inspection system for detecting and rejecting misformed egg cartons. Instead of relying on troublesome pneumatic diverters, they attached diverting rods to actuators, forming sufficient lanes for the traveling and separating of finished products. For this task, Pactiv went with a 27-axis servo system that resists jamming and downtime. Designed and built by systems integrator Chicago Electric, this new servo system is based on E-Smart 50 beltdriven actuators from Rollon. A SCALABLE SERVO SYSTEM Chicago Electric engineers combined 27

108

ENGINEERING REVIEW

APRIL 2016

E-Smart actuators into a single servo system. Because of their shape and material, egg cartons are particularly susceptible to jamming. “The original pneumatic system was unreliable and sometimes jammed in Pactiv’s production line,” said Brendan Forbes, Chicago Electric application engineer who helped design the 27-axis servo system. “The ensuing downtime backed up products and caused major headaches as engineers repaired the machines.” However, when Pactiv upgraded to a servo system, the threat of jamming decreased. Since servo systems are faster and more precise than pneumatic systems, less downtime and additional maintenance are needed. Servo systems are also more reliable due to their heightened accuracy and repeatability. The original system was

www.engrreview.com

TECH TRENDS

» MACHINE TOOLS

Designed and built by Chicago Electric, Pactiv’s new 27-axis servo system organizes traffic flow at the end of production and resists jamming and downtime. redesigned and replaced with a servo-driven system by using the E-Smart 50 actuator, which gives more feedback and allows engineers to see if something has jammed. The system also lets engineers control the timing and speed of the diversion. In addition, this upgrade takes away the need for a worker to constantly stand and monitor the machine. Operators can now be reassigned to more productive roles since the threat of jamming no longer exists. COMPACT ACTUATOR The E-Smart 50 used for this servo system is part of Rollon’s ActuatorLine Smart Series. The actuator features a compact frame for reduced size and weight, yet it’s engineered to maximize load bearing capacity. To strike the balance between size and load carrying capacity, the E-Smart 50

For this application, Chicago Electric combined 27 Rollon E-Smart actuators into a single servo system. These actuators feature a compact frame for reduced size and weight, yet they’re engineered to maximize load bearing capacity

110

ENGINEERING REVIEW

APRIL 2016

has rigid aluminum profiles and robust ball bearing guides mounted into a seat in the aluminum body. A carriage is assembled onto the preloaded ball bearing block so it can withstand even distribution from radial and lateral loads. The carriages of some actuators have a retention cage that eliminates steel-to-steel contact between adjacent rotating elements. The E-Smart 50 also includes a polyurethane transmission belt with steel inserts, AT pitch and parabolic profiles, as well as a 25 AT 5 belt and Z 40 pulley. The belt is ideal because of its high load transmission capabilities, compact size and low noise. And, when combined with a pulley, the belt achieves smooth alternating motion. “The sturdiness, the look everything about the E-Smart 50 just impressed us,” Forbes said. “We used this project to see how well the product stood up and how well it operated against other actuator systems we have used. It has held up extremely well.” For more information: Rollon India Pvt. Ltd. 1st floor, Regus Gem Business Centre 26/1 Hosur road, Bommanahalli Bangalore 560068, INDIA Tel: +91 80 67027066 Fax: +91 80 67027004 info@rollonindia.in www.rollonindia.in

www.engrreview.com

TECH TRENDS

» MACHINE TOOLS

New VariMill III ER from WIDIA With a new seven-flute, eccentric relief (ER) design, the newest addition to the WIDIA VariMill family, the VariMill III ER solid-carbide end mill, is engineered for higher metal removal, longer tool life, and improved surface finishes in demanding workpiece materials such as titaniums and stainless steels.

VariMill III ER is true finishing endmill for higher metal removal rates, longer tool life, and improved surface finishes in demanding workpiece materials such as titaniums and stainless steels

EMs and tier suppliers in the aerospace and energy segments who regularly face working in high-strength, low-weight titaniums and stainless steels will want to see how the VariMill III ER together with the new WIDIA Victory Grade WS15PE can improve performance,” says Ron West, WIDIA product manager. A newly developed coating and proprietary pre- and post-coat treatment significantly improves cutting edge consistency. Consistent cutting edges mean higher metal-removal rates, longer tool life, and improved workpiece surface finishes in expensive demanding materials. The tool is designed to be a true finishing endmill with the ability to take up to 30% radial engagement. “This also means VariMill III ER customers can use high-speed machining

112

ENGINEERING REVIEW

APRIL 2016

techniques such as peel milling or trochoidal machining in high-strength alloys,” West adds. Demanding markets such as aerospace and energy are defined by the need for increased efficiency. In response, WIDIA is offering the VariMill III ER in a full line of options, including two, three, and five times diameter length-of-cut and all common aerospace radii and chamfered corners, metric and inch. With more and more additive layer manufacturing in the aerospace field, the trend going forward will be from roughing to semi-finishing and finishing operations, perfect for the increased efficiencies VariMill III ER provides.VariMill III ER end mills also come standard with the SAFE-LOCK™ option by Haimer, eliminating pull-out risk, and making the tool assembly more stable and concentric, which in turn increases surface finish and tool life.

Featured in NOVO Moreover, VariMill solid-carbide end mills are available through NOVO™, WIDIA’s digital process knowledge application. With powerful process knowledge available on iPad™ and other digital devices, NOVO helps users define machining features, such as ramping or slotting in specific work materials, and then immediately reduces the product set to those like VariMill that can do the job. This provides far more useful process knowledge than any online catalog alone, all obtained in a fraction of the time.

For more information, Web: www.widia.com/novo

www.engrreview.com

TECH TRENDS

» MACHINE TOOLS

Die & Mould competence across the board DMG MORI at Die & Mould in Bangalore (Hall 1A, position B43)

ts many years of experience and application-specific expertise enable DMG MORI to develop customised solutions for users from the die & mould segment. The machine tool manufacturer will be presenting 4 high-tech machines and innovative production solutions for the die & mould industry live in operation at its 144 m² booth in Hall 1A (position B43) at this year’s Die & Mould exhibition in Bangalore. Daily shuttle services to the DMG MORI Technology Center and dedicated seminars round off DMG MORI’s trade fair presentation. That advanced production solutions ensure competitive ability in the manufacturing industry is an undisputed fact. DMG MORI supports its customers in this respect with its many years of experience and holistic process competence. A key feature in the range of products and services of the leader of innovation is also its specific branch orientation. Thanks to innumerable projects in the die and mould making branch, DMG MORI has been able to build up a wealth of application-specific expertise from which its customers today benefit. Because experts from DMG MORI concentrate on developing future-orientated manufacturing solutions for branch-specific applications in dedicated competence centers. HSC Center and Mould Laboratory – die & mould competence built on years of experience Die & mould applications have ranked high at DMG MORI for many years and this has resulted in an enormous wealth of experience in this sector on the one hand and the development and continued development of path-breaking manufacturing technologies on the other. The HSC Center in Geretsried and the Mould Laboratory in

114

ENGINEERING REVIEW

APRIL 2016

Picture 1 : The most accurate, state-of-the-art technologies for tool and mould making are the center of attention in the HSC Center. Japanese Nara impressively underscore this competence with specialised application technicians who always develop optimum manufacturing solutions for the tool and mould making sector. Trials are carried out here, customers are given technological support and training courses are offered. The demands on precision, long-term accuracy and surface qualities are met by stable DMG MORI machining centers that are convincing with their thermo-symmetric design and innovative cooling systems. While spindles with shaft, flange and sleeve cooling ensure best surfaces,

dynamic linear drives enable the required precision and at the same time shorter machining times. At the Die & Mould trade fair in Bangalore, DMG MORI will be presenting its branch competence with the powerful entry-level vertical machining centre ecoMill 600 V as well as the high-tech vertical machining centers DMC 650 V and NVX 5080 and the universal milling machine DMU 65 monoBLOCK®. CELOS® is on board, as it is in all hightech machines from DMG MORI. This uniform, app-based user interface enables

www.engrreview.com

TECH TRENDS

» MACHINE TOOLS important information are just a few of the effects that can be achieved with CELOS®.

Picture 2 : CELOS® enables smooth entry into the future of metal cutting production, because this takes place gradually. Customers who decide for CELOS® today receive firstly unlimited access to the existing 16 CELOS® APPs and secondly they open up the chance of benefiting from future APPs. consistent management, documentation and visualisation of order, process and machine data. In die & mold applications in particular, users benefit here from a seamless process chain. CELOS® from DMG MORI for Industry 4.0 The topic “Industry 4.0” is dominating the discussion of the future like no other, even in the sector of machine tool construction. As the leading manufacturer of metal

Picture 3 : The ecoMill 600 V impresses with its design and revolutionary DMG MORI Multi-Touch SLIMlin

116

ENGINEERING REVIEW

APRIL 2016

removing machine tools worldwide, DMG MORI supports its customers on their way to digital transformation of manufacturing process chains with the app-based CELOS® system, which the machine tool manufacturer first presented around three years ago and which it has consistently continued to develop in a targeted manner ever since. Using this uniform user interface for machine and office PC, employees in shop floor and job scheduling can manage, document and visualise job order, process and machine data. Thanks to its open architecture, CELOS® allows the exchange of information with higher-level structures in addition to its effects in the shop floor area. So CELOS® offers customers complete integration of their machines in the company organisation while simultaneously creating today the interface of metal cutting production in the cyber-physical production system of the future. The benefits in day-to-day operation are convincing: a 30 percent time saving in tooling times and 50 percent lower time and effort for the calculation of technology values or the search for

ecoMill V series – New revolutionary vertical machining centres in the new design with the new DMG MORI Multi-Touch SLIMline® control With the ecoMill 600 V at the Die & Mould trade fair in Bangalore, DMG MORI is presenting the new generation of the ecoMill V series . DMG MORI has defined a new standard of performance in the sector of entry-level machines with the ECOLINE product line. Even at the very first glance, the vertical machining centre impresses with its new design that ensures further improved work ergonomics and a higher level of value retention. The ecoMill V series is based on a C-frame cast iron bed for the best stiffness and vibration characteristics ensuring highest precision. Ball screws of the highest quality and a powerful 12,000 rpm spindle were combined to meet the highest standards in production. The performance of the ecoMill V machines even in the smallest size is outstanding already in the standard version. The highest precision (without direct scales) can be realized, due to direct coupling in X / Y, no belt drive for no backlash. An optimized machine structure also increases stability during machining, and a high degree of manufacturing flexibility is provided in the standard version by having 30 tool pockets in the tool magazine. The absolute highlight is the new 19 – inches DMG MORI multi-touch SLIMline® multi-touch control with Operate on SIEMENS (19” / Operate on SIEMENS / 400 V) with top screen resolution and touch function represents the next advanced step for a modern user interface. The practical and ergonomically optimised 19” multi-touch display with its maximised resolution and 45° swivel range offers decisive user benefits.The new ecoMill V series is also available with DMG MORI SLIMline® Panel (15“ / MAPPS IV on FANUC). For more information www.dmgmori.com

www.engrreview.com

TECH TRENDS

» POWER

Swiss solar panel specialist relies on FLIR thermal imaging camera to perform fail-proof inspections Solar panels have proven to be a wise, future-proof investment in terms of economy and ecology. But just like any other technology, failures may occur. Thermal imaging cameras are an ideal for quick detection of those failures. Heinz Simmler, owner of Swiss photovoltaic inspection company Energie Netzwerk, is an avid supporter of this technology.

hermal imaging can provide owners and installers of solar panels an indispensable look at the interior of solar modules and the construction of the photovoltaic system. Defective cells, junction boxes, cables, inverters or incorrectly connected modules can be localized with high-resolution thermal imaging cameras. Energie Netzwerk, based in Bachenbülach, Switzerland, is specialized in photovoltaic thermography and a certified inspector according to the construction and electrical thermography standard EN ISO 9712. “After gathering many years of experience with the installation and construction of solar panels for a large company, I decided to start my own company with a partner in 2014,” says

118

ENGINEERING REVIEW

APRIL 2016

Heinz Simmler. “Before that, I had already worked with the company Emitec Messtechnik AG, a consultancy firm and distributor of FLIR cameras. This is how I got acquainted with the power of thermal imaging. And when it was time to buy a thermal imaging camera ourselves, there was no question about it that we needed a FLIR camera.”

Solar panel inspections There are usually three situations in which people require thermal imaging inspections, according to Heinz Simmler: “First of all, at the time of installation, people want to be sure that everything works. A fully operational solar panel will allow the installer to provide a quality certificate. Secondly, there can be a

The FLIR T420 has a 320 x 240 pixel resolution and a wide array of functionality that makes a thermographer’s job a lot easier. problem with the installation, something that becomes apparent due to reduced output. Thirdly, before the warranty ends, a customer usually wants to know whether everything is still in order.”

Shadows result in reduced output A solar panel consists of several photovoltaic cells. Whenever one or more of these cells are not working properly, a thermal imaging camera will pick this up in the form of temperature

www.engrreview.com

TECH TRENDS

» POWER

A thermal imaging camera will pick up cell defects as hot spots, which can cause damage to the solar panel in the long run.

differences. This will allow the owner and the installer to become aware of reduced yield and to take the appropriate measures. “A frequent problem is reduced output as a result of shadows,” says Heinz Simmler. “Even a flower that casts a shadow on various solar cells can result in 30% less output in these cells. The result is also that these solar cells will become hotter, which is not very healthy for the installation in the long run.” When an equal amount of sunlight is cast on all solar cells, they will all produce an equal amount of current. When a certain amount of cells is overshadowed, for example by a chimney, they will produce less current. Still, the current of the neighboring cells that are not overshadowed needs to pass through these less active cells. The current that is pushed through these cells will make them heat up. A thermal imaging camera will pick this up as hot spots, which can cause damage to the

Heinz Simmler: “When it was time to buy a thermal imaging camera ourselves, there was no question about it that we needed a FLIR camera.”

120

ENGINEERING REVIEW

APRIL 2016

solar panel in the long run.

FLIR T420 camera and lenses In 2014, Energie Netzwerk purchased a FLIR T420 for use during its photovoltaic inspections. This thermal imaging camera has a 320 x 240 pixel resolution and a wide array of functionality that makes a thermographer’s job a lot easier. As a complement to the standard camera outfit, Energie Netzwerk also purchased an additional 15° telescope lens and a 45° field of view lens. The 15° lens is a popular lens accessory and provides almost 2X magnification compared to the 25° lens. “This lens is ideal to do your thermal inspections from a distance or when you need to inspect a roof from the ground floor,” says Heinz Simmler. “The 45° lens is ideal when you are on a roof and you don’t have a lot of room to maneuver.”

The Bluetooth headset allows you to insert voice comments on a picture. It’s so easy to add a comment to a picture, such as ‘third row, second panel from the left’. important for us; it’s also a way for us to show the customer where the problem is and what we need to do about it. I use the MSX functionality a lot. I also include MSX footage in my reports.”

Ease of use Next to MSX, the FLIR T420 camera also has other useful features that make the job of the solar panel thermographer easier. The annotation functionality for example is something that Heinz Simmler frequently uses. With this feature, it is possible to add voice comments via a Bluetooth headset. “This has proven to be a useful feature for me, especially when you are out there on a roof looking a dozens of solar panels. It’s so easy to add a comment to a picture, such as ‘third row, second panel from the left’. No need to bring an additional paper set or a tablet to make notes.”

Multi Spectral Dynamic Imaging (MSX) FLIR Systems recently added its Multi Spectral Dynamic Imaging (MSX) technology to every camera of its preventative maintenance range. This new feature produces an extremely detail rich image and produces better texture in a thermal image. Thanks to MSX more anomalies can be detected, analyses can be done more detailed and conclusions can be drawn in a split second. The addition of MSX has also been a success for Heinz Simmler: “MSX lets you see exactly in which cell of the solar panel there is a problem. This is not only

For more information FLIR Systems India Pvt. Ltd 1111, D Mall, Netaji Subhash Place, Pitampura, New Delhi – 110034, INDIA Tel: +91-11-4560 3555 | Fax: +91-11-4721 2006 E-mail : flirindia@flir.com.hk or call us at 011-45603555 or Web: www.flir.in

www.engrreview.com

TECH TRENDS

» POWER

Geissel India – German excellence at home

eissel India is an established name in India as a supplier of cable glands and electrical wiring accessories since 1994. The 100% German owned & family run Company since 1920 manufactures goods as per exacting German standards and has created a niche for itself in the Indian electrical market with its International Class Products. The “Geissel” brand of cable glands is well known and accepted worldwide. Products include cable glands in brass, polyamide and stainless steel S.S 303(1.4305) & S.S. 316 TI (1.4571) – according to RoHS standards, in IP 54, IP 68, IP 69K and EMC upto cable dia of 116 mm with all kinds of threads, i.e. Pg, metric and inch. Other products are plugs, reducers, enlargements, lock nuts, etc. In other words - a wide range of electrical wiring accessories.

Some of our “Star” products from the Geissel stable have created an impact in the Indian and International electrical market: Double Compression cable glands: The first of its kind in the Indian market with IP 68 and only three sizes to suit cable dia from 12 – 34 mm. Discerning customers have praised the product for its design, easy application and convenience of only three sizes. Designed and engineered in Germany, but manufactured in India, customers of International repute are finding many advantages in using these glands over others.

Conduits & Conduit glands: The conduits are available in galvanized steel as well as PVC coating on galvanized steel in grey and black colours. Complementing them are the conduit glands which fit the conduits perfectly. The design and application is simple and customers get a one-stop solution to their needs for conduits and the ease in fitting them. EMC glands. Available in brass with nickel plating in metric as well as Pg threads, these glands are very userfriendly. Customers of international repute have appreciated this simple but effective design. Multisealing inserts: To fit both brass and polyamide glands, with an assurance of IP 68 protection. IP 69K brass glands: the most recent entry. Geissel’s way to increase the threshold of water ingress at high pressure. PBE: Pressure balance element – to let out excessive moisture from enclosures/boxes. Detailed technical and pictorial descriptions of all Geissel products are available in their recently upgraded catalogue which can be downloaded from the website www.geissel.com Geissel India’s USP is the availability of mostly all products ex-stock from their factory in Pune. For more information: Email: info@geissel-india.com

122

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

TECH TRENDS

» AIR COMPRESSORS

Rust Proof energy efficient Aipipe compressed air distribution system

e wish to introduce our self as 100% subsidiary of Eco Pipe Ltd Company, we are leader in the compressed air distribution market. After several years of research, Airpipe was introduced. On the initial note the improvement for compressed air distribution system is immense. A few of the most effective benefits that you could expect after renovation are as follows:Corrosion proof aluminum alloy piping. The Pipe material has been engineered so as to counter the common problem of corrosion which results in scaling and porosity resulting in pressure drop and leakages. As per the latest data from prominent External body institutes a leakage from a hole of a size of 800 micros represents a loss of Rs 80000 annually.

Minimal pressures drop by the virtue of long lasting internal smooth surface of the pipe resulting in laminar flow as compared to the turbulent flow of the mild steel pipe material. This results in huge energy savings. British compressed air society confirms for every I bar of pressure drop the compressor represents a 7 % increase in compressor energy cost Zero Leakages Our “Airpipe” pipe and fittings a system ensures that there are no leakages from the piping and the components and comes with a 10 years zero leak guarantee. Plus there are many more benefits such as: no water retention in the system, ability to take out drop line even when the system is charged, scientifically designed fittings which ensure full flow and minimum pressure loss at drop points, in built sturdiness and flexibility in the system to

Mr. Santosh Kumar, Managing Director Instamod Airpipe Private Ltd.

Instamod Airpipe Warehouse

124

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

Special travel packages to visit International trade fairs for

Machine Tools, Aluminium, Commodities & Coatings

 

Aluminium CHINA 2016 22 – 26 June 2016, Beijing ► + 1,300 Exhibitors ► Over 150,000 Visitors CIMES 2016 is a truly global machine tool trading and sourcing platform hosted in the world’s biggest machine tool market: China. As Asia’s leading machine tool exhibition for metal cutting tools and CNC machine trade, it also showcases the very latest high-end metalworking and industrial automation technology.

12 – 14 July 2016, Shanghai Asia’s leading sourcing and networking platform for the complete aluminium industry chain  500 exhibitors from 30 nations  16,000 trade visitors from 90 national  Concurrent event: COPPER CHINA,  MAGNESIUM CHINA

Highlights for Int’l Visitors: • Source from 3200 pieces of Equipment and Tools, displayed onsite • Factory Visits • New Robot Pavilion and more than 60 technical seminars and workshops

Aluminium Germany 2016





29 Nov-1 Dec 2016, Dusseldorf  1,000 exhibitors from 50 nations  25,000 trade visitors from 100 nations  Concurrent event:COMPOSITES EUROPE

CANTON 2016

15 – 19 October 2016, Guangzhou - China

► 150000 products ►+ 24700 Exhibitors ►+ 186104 Visitors from 211 countries 120th Canton Fair 2016 China's oldest and largest comprehensive trade fair, is the key trade bridge and platform that promotes world trade development. The most effective way to develop the business relationships for Indian visitors to succeed in China. ● Exhibit Profile ● • • • • • • • • •

Consumer Electronics Small Machinery Bicycles, Motorcycles Vehicle Spare Parts Chemical Products Hardware & Tools International Pavilion Lighting Equipment Household Electrical Appliances

• Sanitary and Bathroom Equipment • Construction Machinery • Building and Decorative Materials • Computer and Communication Products • Electronic & Electrical Products

 • 1088 exhibitors from 32 countries • 29580 visitors from 81 countries Exhibit Profile  Raw Materials for the production of Coatings, Inks & Adhesives  Powder Coatings Technology  UV/EB Technology & Products  Production/Packaging Plants & Installations  Measurement & Testing of Coatings for QC/R&D  Safety, Health & Environment (SHE) & other Services  Coatings, Printing Inks & Adhesives Products

Concurrent Event:

TECH TRENDS

Time saving electrical CAD software AUTOMATION - electrical CAD software PC|SCHEMATIC has been a leading Electrical CAD software developer on the global market for 35 years, specialising in intelligent design and documentation of electrical control systems and PLC diagrams, pneumatics and hydraulic systems. The electrical CAD software PC|SCHEMATIC Automation is designed from the basic concept of setting you free to focus on the electrical aspects, while the program handles the practical side. Beyond the basic drawing functions, Automation offers you a comprehensive series of functions specially designed for electrical projects with IEC/EN standards.

Mr. Ove Larsen, International Sales Director, PC|SCHEMATIC A/s, Denmark

Documentation When you click on a component in the component vendor database, you automatically get a menu containing the electrical symbols for the component. By placing these symbols in the diagrams you also transfer information to the electrical diagram which enables the program to fill out order lists or files automatically. Integration PC|SCHEMATIC Automation can interface with PLC I/O tools, wire numbering tools, label systems, send files for component ordering systems, edit PLC data via Excel, import and export the standard CAD formats DWG and DXF, and update all types of lists automatically. Furthermore the program supports practically any database format, so that it can work with the database format used in your company. Our solution saves 80% time To make it possible for existing and new users to get started quickly, PC|SCHEMATIC - and its distributors offers a consulting service, consisting of an analysis of the already existing

126

ENGINEERING REVIEW

APRIL 2016

electrical documentation. Based on this analysis, the optimal set of subdrawings, models and project templates can be effectively created. This also has the consequence that new users can get started creating complete electrical documentation projects really quickly. In larger companies, this way of working might result in that just one single person needs to be pointed out as the main responsible for creating the company subdrawings, while the others in future almost only will need to create documentation by dragging templates and subdrawings into projects. Experiences from the industry suggest that the documentation time can be reduced by up to 80 percent. Why should I buy PC|SCHEMATIC Automation? People buying PC|SCHEMATIC Automation usually tell us they did it because: • It is easy to work with, and is very flexible in the everyday work routines. • The Module and Model Based drag’n draw functions, makes it possible to create electrical schematic pages extremely fast. • We have an excellent support team, and you can get support via NetViewer. Our support team can then see your screen, and guide you directly on your own PC. • Intelligent reuse of existing material with intelligent renaming - saves lots of time. • The intelligent connection between database and symbols is unique. • Electrical standards are integrated intelligently. • Functions for automatic project generation, automatic graphical plan generation and automatic documentation of symbols in projects/ libraries.

www.engrreview.com

TECH TRENDS PC|SCHEMATIC Automation. • Free access to our electrical design videos - where you can see PC|SCHEMATIC Automation in action. • Free access to articles about electrical design CAD programs. • Free access to the PC|SCHEMATIC user forums. When you have bought PC|SCHEMATIC Automation, you can either attend PC|SCHEMATIC training in your own country, or attend a web seminar about the topics you need to get familiar with. Please contact venkat@pcschematic.in for further details.

PC|SCHEMATIC Automation is designed from the basic concept of setting you free to focus on the electrical aspects, while the program handles the practical side. Beyond the basic drawing functions, Automation offers you a comprehensive series of functions specially designed for electrical projects with IEC/EN standards.

Contact us at any time At PC|SCHEMATIC we are very interested in hearing about your experiences using the PC|SCHEMATIC Automation program. It is because of the feedback from our many users, that we are able to make a better product year by year! So Feel free to contact us at any time.

Can I convert my schematic diagrams from other systems to Automation? Yes! You can convert schematic diagrams from practically speaking any CAD system to the PC|SCHEMATIC Automation format - as long as the CAD system can produce DWG or DXF files. PC|SCHEMATIC also offers a consultant service for converting drawings from other systems to the PC|SCHEMATIC Automation format. Can I export to other formats? From PC|SCHEMATIC Automation, you can export to the DWG and DXF formats. PC|SCHEMATIC is an active member of the OpenDWG alliance. From PC|SCHEMATIC Automation, you can also export projects as intelligent PDF files with active link between references etc. Electrical standards: How well are they integrated in PC|SCHEMATIC?

128

ENGINEERING REVIEW

APRIL 2016

At PC|SCHEMATIC we have detailed insight in electrical documentation standards, and we are active members of standardisation committees. We also publish the book “Electrical documentation according to standards”. This insight in the IEC/EN electrical standards is an integrated part of PC|SCHEMATIC Automation. However, the program is designed so flexible, that you can also use it for other standards than the IEC/EN standards. - Even for your own set of standards! Support: How can I get it? When you buy PC|SCHEMATIC Automation, you get “Tier 2support” from the PC|SCHEMATIC in India as well from our Head Office Denmark. This can take place using e-mail, telephone or NetViewer (where we can guide you directly on your own PC). • Free access to the complete set of electrical design manuals for

Conclusion Your success is our success. We want YOU to experience success and achieve your goals – regarding your customers, your workers, and your possible superiors. This is important to us. Because when you achieve success, we succeed as well.

Contact Details India A.Venkatakrishnan Market Consultant – INDIA venkat@pcschematic.in

www.engrreview.com

Innovation Generates Opportunity

Nordson EFD solutions offer the latest advancements in precision dispensing technology. Find out how our innovative systems can generate new manufacturing opportunities. Learn how you can achieve: Faster Dispensing • New valves that jet at up to 1500Hz Greater Accuracy • Innovative systems that deliver precise, repeatable deposits as small as 150 µm in diameter Lower Cost of Ownership • Robust, modular, tool-free designs that easily adapt to different applications EFD’s innovative solutions can help you improve process control and productivity for greater overall cost savings and profitability. To learn more contact us at +91 80 4021 3600 or india@nordsonefd.com .

See it in action

nordsonefd.com/improved-dispensing

Nordson India Pvt Ltd, 143A, Bommasandra Industrial Area, Bangalore – 560099, India. india@nordsonefd.com +91 80 4021 3600

Engineering Review 0316.indd 1

2/25/16 1:06 PM

ENGINEERING REVIEW |

129 | April 2016

TECH TRENDS

» AIR COMPRESSORS

ensure any future expansions plus many more. A brief catalogue on the system is enclosed. We have in all more than 10000 installations world over. It would also be worth mentioning here that with our Aluminum piping one can earn carbon credit from leading institute since it is green building concept .

Instamod office & Warehouse located in West Delhi easily accessible from New Delhi station & airport ,one can take Delhi Metro to reach our office & warehouse which are located @ different places in Delhi within range of 15KM . Technical specification • Working temperature: -20°C to +70°C (-30°C to +80°C*-30°C to +80°C

• Maximum working pressure: 13bar • Vacuum Degree: 0.13bar absolute pressure • Compatible with compressed oil • Fireproof (Meet UL-90-VC standard) • Suitable for outdoor installation • Size from 20mm to 200mm

For more information, Website: www.airpipe.in

WHY AIRpipe ? Over GI Pipes AIRpipe

GI Pipe

Smooth InternalSurface

Rough Internal Surface

Constant, low friction factor, resulting in an unrestricted air flow.

Low initial pressure drop. (E.g. In a system with

pipe, restricting the air flow. Due to corrosion, the friction factor increases over time. High initial pressure drop. (E.g. In a system with

an air demand of 110 l/s, designed as a 400 m

long ring of Ø50 mm (2”) pipes with P = 7 bar,

the pressure drop (rP) equals 0.2 bar.)

the pressure drop (rP) equals 0.37 bar.)

Requires lower loading pressure at the compressor

Requires higher loading pressure at the compressor

and lower power consumption.

and higher power consumption.

Standard painted blue (compressed air) or

Pipes need to be painted in the appropriate color,

grey(inert gases) for easy network identification.

adding to the total cost.

AIRpipe’saluminium pipes and fittings do not corrode. Their smooth inner surface keeps air clean, now and in the years to come.

No risk of corrosion when cutting the aluminium.

130

Friction factor is almost double of an aluminium

ENGINEERING REVIEW

APRIL 2016

Corrosion protection depends on the quality of the galvanization.

When the pipe is cut, the galvanization is removed, resulting in a high risk of corrosion.

www.engrreview.com

ENGINEERING REVIEW |

131 | April 2016

ENGINEERING REVIEW |

133 | April 2016

ENGINEERING REVIEW |

134 | April 2016

Witness a true international event with state-of-the-art infrastructure

Venue: The Exhibition Center, Helipad Ground, Gandhinagar, Gujarat, INDIA.

ENGINEERING REVIEW |

138 | April 2016

BUSINESS AVENUES

INSIDE BUSINESS AVENUES Information on latest manufacturing projects in India SR. NO.

CATEGORY

PG. NO.

01.

NORTH INDIA

147

02.

WEST INDIA

149

03.

SOUTH INDIA

152

04.

EAST INDIA

154

NORTH INDIA

lans construction of flyover/under- pass for improvement of existing Junctions at Rajiv Chowk, at km.33.185 on Delhi Gurgaon Access Controlled Highway on NH-8 in Haryana on EPC Mode. The completion is targeted in 30 months. Request for proposal is currently invited. “ Place : Gurgaon Haryana” National Highways Authority of India (NHAI)

www.engrreview.com

“Nishoo Gupta, General Manager, G-5&6, Sector-10, Dwarka, New Delhi-110075 . T: 011-25074100/200 (Extn.: 1321), nishoogupta@nhai.org”

lans to undertake 4/6 laning of Kharar to Ludhiana section of NH-95 (new NH-05) from Kharar km.10+185 (design APRIL 2016 ENGINEERING REVIEW

147

BUSINESS AVENUES chainage) to Samrala chowk, Ludhiana km. 86+199 (design chainage) in the state of Punjab on hybrid annuity mode. Request for proposal is currently invited. Place : Ludhiana Punjab National Highways Authority of India (NHAI) “Rajeev Yadav, GM (Technical), G-5 & G-6, Sector-10, Dwarka, New Delhi - 110075. T: 011-25074100/2001407/2319, M: 9868113500, rajeevyadav@nhai.org”

lans to set up manufacturing facility spread over 1 lakh sq feet in Assam. The installed capacity of the unit will be 86.41 million units per annum. The production would commence by March 2017. Place : Assam VLCC Health Care Ltd “Nandini Vaish, PR & Corporate Communications, 64, HSIIDC Sector - 18, Maruti Industrial Area, Gurgaon – 122015, Haryana. T: 0124-4719700, 4719726, Fax : 4011371, E-mail: nandini.vaish@vlccwellness.com, contact@vlccwellness.com”

s part of its expansion plan, the company plans to set up a factory spread over 24 acre in Samba sector. The unit would mainly manufacture room airconditioners, deep freezers and water coolers. The unit is likely to commence production in FY2018. Place : Samba Jammu & Kashmir Blue Star Ltd “Girish Hingorani, Head of Marketing and Corporate Communications, Kasturi Buildings, Mohan T Advani Chowk, Jamshedji Tata Road, Mumbai - 400020, Maharashtra. T: 022-66654000, F: 66654151, girishhingorani@bluestarindia.com (B Thiagarajan, executive director & President AC&R Products Business)”

SIIDC has signed an MoU with Jaina Mobiles Industries for setting up of an Electronics Cluster in Industrial Model Township (IMT) Sohna, district Mewat, Haryana. Place : Mewat Haryana Haryana State Industrial & Infrastructure Development Corporation (HSIIDC) “R.N Khan, Addl GM, Plot No C 13 & 14, SEctor 6, Panchkula - 134109, Haryana, T:0172-2584233, M: 9463888308, rnkhan60@gmail.com, Mr. Sudhir Rajpal , IAS, Managing Director

148

ENGINEERING REVIEW

APRIL 2016

lans to add 1x660 MW coal based super critical unit to existing 665 MW capacity at Harduaganj Thermal Power Project at Kasimpur, Aligarh District, Uttar Pradesh. Place : Aligarh District Uttar Pradesh UP Rajya Vidyut Utpadan Nigam Ltd “R K Trivedi, Director (Project), Environment & Safety Unit, 7th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001, Uttar Pradesh. T: 0522-2288557, director.project@uprvunl.org

V of NLC Ltd & UPRVUNL plans to set up super critical imported coal based Ghatampur Thermal Power Station of 1980 (3x660) MW capacity at Tehsil Ghatampur, District Kanpur Nagar, Uttar Pradesh. The total project area is 1886 acre including ash pond area and township. Land is already acquired. Place : Kanpur District Uttar Pradesh Neyveli Uttar Pradesh Power Ltd “K Chandran, CEO, AE 55,Officer Colony, Panki Power Plant, Kanpur-208020, Uttar Pradesh. T: 0512-2260030, E-mail: ceo.nuppl@nlcindia.com”

obile handset manufacturer plans to set up second manufacturing unit in Noida. Around 50 acre of land is acquired. The company aims to double its production capacity. Place : Noida Uttar Pradesh Lava International Ltd Hari Om Rai, CMD “Ananyaa Banerjee, Deputy Manager, A-56, Sector – 64, Noida-201301, Uttar Pradesh. T: 0120-4637100, M: 9818648821, 8826992709, ananyaa.banerjee@lavainternational.in

lans to construct an international airport in Kushinagar district on a public private partnership (PPP) model spread over 569-hectares land. The state government has cleared the first instalment of Rs 80 crore for constructing the runway. Place : Kushinagar Uttar Pradesh Civil Aviation Department Uttar Pradesh “Aryan Lal, Civil Engineer, Civil Aviation Department, Govt of Uttar Pradesh Lucknow Airport, Lucknow, UP. Tel : 0522–2436504, 2437565, Fax : 0522–2435780, E-mail: dsca@bsnl.in www.engrreview.com

BUSINESS AVENUES

WEST INDIA

agged an order from India Trade Promotion Organisation (ITPO) for Re-development of Pragati Maidan, New Delhi. Place : New Delhi Delhi NBCC Ltd “Yogesh Sharma, CGM (PMG), NBCC Bhawan, Lodhi Road, New Delhi-110003, T: 011-43591555, 24367314-15, F: 24366995, cgmpmg.nbcc@gov.in, cs.nbcc@nic.in, (Dr. Anoop Kumar Mittal, CMD)”

s part of its expansion plan, the company plans investment to the tune of Rs 8,000 crore on its automotive plants located at Nashik, Kandivali, Igatpuri and Chakan in Maharashtra over the next seven years. The company has signed Memorandum of Understanding (MoU) with the state government in this regard. Place : Maharashtra Mahindra & Mahindra “Roma Balwani, Sr VP & Group Head Corp Comm, Mahindra Towers, Media Cube, G. M. Bhosale Marg, Worli, Mumbai - 400018, T: 022-24975176, F: 24900830, balwani.roma@mahindra.com Pawan Goenka, Executive Director

lans to set up a new urea plant with a capacity of 1.27 million tonne per annum at its Thal unit in Maharashtra. PIB clearance is expected soon. Place : Maharashtra Rashtriya Chemicals and Fertilisers (RCF) “S.D Pandare, GM (Corporate), 10th Floor, Priyadarshini, Eastern Express Highway, Sion, Mumbai - 400022, T: 022-25523087, 25523025, E-mail: sapandare@rcfltd.com

lans to assign the construction of retaining wall with pile foundation at Mohili water treatment plant. The completion period is 12 months. Place : Thane district Maharashtra Kalyan Dombivali Municipal Corporation

www.engrreview.com

E Ravendiren, Commissioner “Gopal Bhangre, Hydraulic Engineer, Shankarrao Chowk, Kalyan City, Thane - 421301, Maharashtra. T: 0251-2206207, 2204065, 2206205, www.kdmc.gov.in,

lans to set up a full fledged railway university at Vadodara in Gujarat. Place : Vadodara Gujarat Indian Railways “Vijay Kumar, Commercial Manager, National Academy of Indian Railway, Vadodra - 390010, T: 0265-2633427, 9601285937”

lans to assign architectural and engineering design services for upgradation of district hospital to the capacity of 300 beds at Nadiad, District Kheda. Place : Kheda Gujarat Health and Family Welfare Department R.A Patel, EE, D-Office No 303, Sardar Bhawan, MS Building Nadiad, Kheda, Gujarat. M: 9978407940

he company plans to develop the fifth phase of its IT park Nirlon Knowledge Park in Goregaon suburb of Mumbai. Place : Mumbai Maharashtra Nirlon Ltd “Shikha Dhareshwar, Project Manager, Rahul V. Sagar, Executive Director Pahadi Village, Off. The Western Express Highway, Goregaon(E), Mumbai – 400063, Maharashtra. T: 26852256-59 / 40281919, F: 40281940, shikha@nirlonltd.com, info@nirlonltd. com, www.nirlonltd.com,

lans to drill a 406 development wells in oil fields of Gujarat’s Cambay basin. The proposed drilling is expected to be undertaken at the company’s Ahmedabad asset located in Gandhi- nagar, Place : Ahmedabad and Kheda districts. APRIL 2016 ENGINEERING REVIEW

149

BUSINESS AVENUES Oil and Natural Gas Corporation Ltd Mr. Dinesh K Sarraf, CMD Gujarat Sanjeev Sharma, Head (Public Relation and Corp Comm), Jeevan Bharti, Tower-II, 124-Indira Chowk, New Delhi – 110001 T: 011-23301243, 23320032, F: 23357860, ongcdelhicc@ongc.co.in

lobal bids are invited for Dharavi Redevelopment Project. In the first phase, Sectors 1 to 4 would be developed through private builders. The selected builders would have to construct free housing for the eligible slum dwellers and provide the required amenities and infrastructure. Place : Mumbai Maharashtra Slum Rehabilitation Authority “Harish Varade, PRO, Administrative Building, Anant Kanekar Marg, Bandra (E), Mumbai-400051, Maharashtra. T: 022-26590519,26590405, pro@sra.gov.in, info@sra.gov.in, (Aseem Gupta, CEO)

equest for proposal invited for the design, construction, operation, and maintenance of processing plant & engineered sanitary landfill site under the guidelines of Swachh Bharat Mission (SBM) for Nagar Nigam Bharatpur. Place : Bharatpur Rajasthan Directorate of Local Bodies, Rajasthan “K. K. Sharma, Chief Engineer, G-3, Rajmahal Residency, Near Civil lines, Railway Crossing, Jaipur, rajasthan. T: 0141-2222469, F: 2222403, M: 9829194003, cedlbjp@gmail.com”

lans to set-up Solar Power Plant in the premises of 18.0 MLD water treatment plant of Gondia WSS near village Kudwa, Tq. Gondia Dist. Place : Gondia. in the State of Maharashtra, Gondia District Maharashtra Maharashtra Jivan Pradhikaran “Chandrika Pure, EE, MJP Division, Gondia, Maharashtra, Tel : 07182-251266”

dlabs Imagica plans to open two more theme parks in northern and southern regions of the country in the next three to five years. Place : Southern India Adlabs Entertainment (AEL) “Mayuresh Kore, Vice President - Finance, Nimbus Business Center, 3rd Floor, Sab TV Lane, Andheri (W), Mumbai - 400053 Maharashtra, T: 022-40680000, 26, admin.ho@adlabsententertainment. com, Kapil Bagla, Director and CEO

lans to develop a 3(H) TPD Municipal Solid Waste (MSW) to energy incineration facility for the city of Mira Bhaindar on design, build, finance, operate and transfer (DBFOT) basis. The land for setting up the MSW processing facility will lie provided by the MBMC and MBMC will assure the quantity of waste delivered at the Sakwar Treatment site. The completion period is 6 months. Place : Mumbai Maharashtra Mira Bhainder Municipal Corporation “Prashant Jankar, Electrical Engineer, Public Health Department, Indira Gandhi Bhavan, Thane, Maharash- tra. M: 8422811224, 9819265842 (Dr. Sambhaji Panpatte, Dy Commissioner (Health), prashantjankar1@gmail.com”

lans to assign construction of solid waste and waste water management project at Sadegaon, Tq. Ambad, Jalna. The work is likely to start soon. Place : Jalna, Maharashtra Rural Development Department “Swami Vibhadra, Sectional Engineer (Water Supply),

150

Rural Water Supply, Sub Division, Ambad - 431213, Maharashtra, Tel : 02482-225412, M: 9423729123”

ENGINEERING REVIEW

APRIL 2016

lans to set up a manufacturing facility for off-road radial tyres in the state of Maharashtra. Place : Thane district Maharashtra CEAT Ltd “Naveen Khurana, GM (Project), Ceat Mahal, 463, Dr. Annie Besant Road, Worli , Mumbai-400030, Maharashtra. T: 022--66823735, 24930621, E-mail: naveen.khurana@ceat.in

lans to assign construction of raw water channel wall at Mohane Head works. The completion is targeted in three months. Place : Thane district Maharashtra Kalyan Dombivali Municipal Corporation E Ravindran, Commissioner “Gopal Bhangre, Hydraulic Engineer, Shankarrao Chowk, Kalyan City, Thane - 421301, Maharashtra. T: 0251-2206207, 2204065, 2206205, www.kdmc.gov.in, www.engrreview.com

BUSINESS AVENUES

SOUTH INDIA

lans to set up an engineering services centre near Bengaluru. Place : Bengaluru Karnataka Hical Technologies Pvt Ltd “N. P. Manjunath, Sr. GM, No.46 & 47,Unit No 3, Phase 2, Hosur Road, Electronic City, Bangalore - 560100, Karnataka. T: 080-66189686, 66189687, 66189602, 66189603, F: 28520558, M: 9845028485, manjunath.np@hical.com”

wedish commercial vehicle and engine manufacturer plans to double its production capacity at its plant located in Karnataka by 2020. Place : Karnataka Scania “Royce Roy, Manager (Marketing & Communication), Plot #63 (part), 64-66, 88-97, Naraspura KIADB Industrial Area, Achhatanahalli Village, Naraspura Hobli, Kolar - 563133, Karnataka. T: 0815-2288300, royce.roy@scania.com,

eliance Group company Reliance Defence plans to set up a centre for research, development and innovation in aerospace technolog at Rambilli near Vizag. Place : Visakhapatnam Andhra Pradesh Reliance Group “Daljeet S Singh, Senior Executive Vice President, Reliance Centre, 19 Walchand Hirachand Marg, Ballard Estate, Mumbai – 400001, Maharashtra. T: 022-30327000,30345522, M: 9312014099, E-mail: daljeet.s.singh@relianceada.com”

lans to set up a new naval shipbuilding facility in Andhra Pradesh. Place : Andhra Pradesh Reliance Group “Daljeet S Singh, Senior Executive Vice President, Reliance Centre, 19 Walchand Hirachand Marg,

152

ENGINEERING REVIEW

APRIL 2016

Ballard Estate, Mumbai – 400001, Maharashtra. T: 022-30327000,30345522, M: 9312014099, E-mail: daljeet.s.singh@relianceada.com”

lans to set up a new manufacturing unit on the outskirts of Bengaluru. The company has eleven plants across seven locations, and its proposed plant on a 50-acre plot near Bengaluru. Place : Bengaluru Karnataka Havells India Ltd “Anil Sharma, Head Corporate Communications, QRG Towers, 2D, Sec- 126, Express way, Noida - 201304, UP. T: 0120-4772015, 3331000, F: 3332000, E-mail: anil3.sharma@havells.com

s part of its expansion plan, the company plans to set up a factory spread over 20 acre in Sri City sector. The unit would mainly manufacture room airconditioners, deep freezers and water coolers. The unit is likely to commence production in FY2019. Place : Sri City & Samba Andhra Pradesh Blue Star Ltd “Girish Hingorani, Head of Marketing and Corporate Communications, T: 022-66654000, F: 66654151, E-mail: girishhingorani@bluestarindia.com”

lans to set up India’s first Defence Industrial Park spread over 60 acre at Ottappalam in Kerala. Department of Industrial Policy and Promotion (DIPP) has given nod to this project. Place : Kerala Kerala Industrial Infrastructure Development Corporation (Kinfra) G.C. Gopala Pillai, MD “Michael Suresh, Sr Consultant, KINFRA House, TC 31/2312, Sasthamangalam, Thiruvananthapuram -695010, Kerala. T: 0471-2727281, 2314509, M: 9387058431, kinfra@vsnl.com, www.engrreview.com

BUSINESS AVENUES

EAST INDIA

lans to assign design, supply, installation, commissioning & maintenance for 5 years of (5 kWp x 16Nos) off-grid rooftop Solar PV power plant with battery backup in 16 Residential Schools in 9 districts of Odisha state. The contract will be awarded soon. Place : Odisha REC Power Distribution Company Ltd T: 011-44128755, 44128752, M: 9958802216, 9810964380, goru.sudhakar@ recpdcl.in, (S C Garg, Addl. CEO)”

lans to set up a 3 mtpa green field integrated aluminium refinery in Rayagada district. The state government clearance is expected in 2-3 months. Place : Rayagada District Odisha Larsen & Toubro (L&T) “Sumit Ganguly, DGM (Special Initiative), Annapurna Complex, 559, Lewis Road, Bhubaneswar-751014, Odisha. T: 0674-2436695, 2537301,F: 2537309, E-mail: sumit.ganguly@larsentoubro.com, (Shailendra Roy, Senior Executive Vice-president-Power, Minerals and Metals)”

lans to setting up three skill development centres for the diversified sector at National Jute manufactures Corporation mills - Howrah Alaxendra and kinnison - in West Bengal. Place : West Bengal National Jute Board “Pramod K. Sahu, Chief Market Promotion Officer, 3A Park Plaza, 71 Park Street, Kolkata-700016, West Bengal. T: 033-22172107/ 2540, 222634381, E-mail: jute@njbindia.in

overnment of West Bengal plans to constuct a Food Park in the state. The West Bengal government has identified 61 acre of contiguous land for the proposed project. Place : West Bengal Ministry of Food Processing Industries

154

ENGINEERING REVIEW

APRIL 2016

“Sanjay Kumar Singh, Under Secretray, Panchsheel Bhawan, August Kranti Marg, Khelgaon, New Delhi-110049, Delhi. T: 011-26406531, singh@nic.in”

he company plans to set up an aluminium park on 240 acre adjacent to its aluminium smelter at Jharsu- guda. An agreement is signed with the Government of Odisha. Place : Jhasarguda Odisha Vedanta Aluminium Ltd Deepika Pradhan, HR Head, PMO Office, Bhurkahamunda, PO-Sripura, Dist- Jharsuguda-768202, Odisha. Tel : 06645-666739, hr.communication@ vedanta.co.in, Abhijit Pati, CEO- Aluminium

lobal bids are invited for developing and operating its coal mine in Chhattisgarh. The company intends to select a Mine Developer and Operator to develop, operate and mine coal from the Gare Palma Sector-I Coal Block (Phase I). Place : Raigarh Chhattisgarh Gujarat State Electricity Corporation Ltd (GSECL) “C G Parekh, EE, Sardar Patel Vidyut Bhawan, R C Datt Road, Vadodara-390007, Gujarat. T:0265-6612005, eefuel2.gsecl@gebmail.com, cefuel.gsecl@gebmail.com”

CL has unveiled a capital expenditure plan targeting 250 million tonne (mt) output by 2020. As part of this plan, new mines such as Garjanbahal and Siarmal in Basundhara area located in Sundargarh district and Gopalprasad will be opened. Place : SundargarhDistrict Odisha Mahanadi Coalfields Ltd (MCL) A K Jha, MD “M L Prajapat, GM Project & Planning, P.O. - Jagriti Vihar, Burla District, Sambalpur-768020, Odisha. T: 0663-2542461, 2542767, www.engrreview.com

PRODUCT SHOWCASE Hangsterfer’s CC 10 - 22 Straight Cutting Oils For Deep Hole Drilling • • • • • • • • • •

CC 10 & CC22 oils are Chlorine-Free Non-Staining Can be used safely on all materials Non-Toxic Non-Irritating Non-Corrosive Easy to recycle and waste treat Lower misting Fewer residues

Hangsterfer’s neat cutting oil CC10 is recommended for Deep Hole Drilling /Gun Drilling application. CC10 (Viscosity 10) has all the capability to outperform. Hangsterfer’s neat cutting oils are recognized by various machine manufacturers around the world. These oil improves tool life and surface qualities to the large extent. In addition to the lubricity provided at the cutting zone, Hangsterfer’s cutting oils provide excellent lubrication

for the machine’s slides, guide bushings, bearings, and spindles. CC 10 - This is the lowest viscosity in the series. CC 10 is ideal for Gun Drilling application which allows for more heat removal with high pressure. CC 22 - This oil is ideal for use in BTA application. It has enough lubricity for the more demanding operations and materials, including lubrication of the guide-bushings.

For more information Hangsterfer’s Laboratories, Inc.USA Sanjay Tools & Adhesives Mobile : +91 9822028518 , +91 9892516810 E-mail: hangsterfers@sanjaytoolsnsk.com Web : www.hangsterfers.com

www.engrreview.com

Take Temperature Measurements Safely with FLIR’s New TG54 & TG56 FLIR launched the new TG54 and TG56 Spot IR Thermometers, which allow professionals to quickly and easily take measurements in places that are out of reach for most IR thermometers.These thermometers let users take non-contact temperature measurements with a distance-to-spot ratio of 24:1 (TG54) and 30:1 (TG56).That means that with a TG56, they can measure a one-inch sized target from up to 30 feet away! A built-in laser and powerful LED work light help pinpoint the problem area, even in poor lighting conditions. Both thermometers have a large, color display and a graphical menu structure so the high and low alarms are easy to set and can’t be missed. Every temperature setting is simple to find and select, including emissivity, which has pre-determined levels

and can be custom adjusted. The TG54 and TG56 allow users to view their current temperature reading along with their last two readings together on one screen. This makes comparing temperature differences convenient without having to memorize or write them down. The main differentiating feature between the two products is that the TG56 includes a thermocouple Type K input for added flexibility when taking measurements. Find out more about the TG54 and TG56 and how efficient they are for temperature measurement at www.flir.in/ TG54-56

APRIL 2016 ENGINEERING REVIEW

155

PRODUCT SHOWCASE

Pioneer in intuitive programming • Offer the easiest-to-use and most adaptable alternative Automation Solution for specialized and demanding needs • An experienced technical team • A pioneer in the simplification of programming

em4 - MORE THAN JUST A PLC • All-in-one fully connected nano-PLC • Remote management & maintenance on a PC & mobile devices • Accurate & performant sensor measurement

Millenium 3 - Logic Controller • Compact & expandable • Easy to program • Multiple configuration options

Specialist in electromagnetic & electronic technology • Specialist in time management with an extensive automation components offer that includes timers, monitoring relays • In addition to high-performance products, advice and support, offers tailor-made solutions for any application

KING CUT PRO – The large gantry type CNC Cutting Machine Ador’s KING CUT PRO is a CNC portal cutting machine which is very precise and reliable. The machine has one head for plasma sheet metal cutting and one head for flame cutting of sheet metal with a dual side longitudinal drive with AC motors. The standard equipment comes with a basic machine package with CNC controller, one torch, central gas diffusion with manometers and a remote flame ignition.

The following equipment are supplied as required by the customer: Additional Equipment: • Plasma power source KJELBERG with machine torch • Programming software MOST 2D • Support table for sheet metal with segment extraction system • Extraction-filter system • Laser position indicator for determining the cutting point

Optional : TIMERS: • Simple to use • Multi voltage • Multi or mono function •

MONITORING RELAYS: • Close-up protection for total

• Extension of the longitudinal rail • Additional cutting head availability of equipment • All anomalies are detected • Optimise continuity of service

The CNC Controller – Phantom: The Phantom brings you the performance of a cutting edge

CNC that is built on more than 40 years of experience in the motion control and cutting industries. This controller is designed for multiple axis cutting machines and features the latest advances in CNC technology on a proven platform engineered to increase productivity, reduce costs and enhance profitability. The software provides flexibility, ease of operation and technologies that put Ador’s experience and expertise in your operator’s hands, resulting in extremely good cut quality and high productivity. The Phantom can operate any cutting machine and interface with virtually all plasma systems. Following are its standard features: Bright touch screen interface, Touch screen interactive display, Expandable shape library, True multi-tasking environment, Fast Dxt file conversion, Go to(Job interrupt), Quick plate alignment, and Monitor & track consumables. Advanced Plasma Process Control (Plasma Process Wizard) is available as optional extra. Ador offers cost-saving height control unit for simple plasma cutting applications. The KHC1 system provides all the essential functions that are needed for good cuts and optimum utilization of workpiece.

For more information

156

InnoVista Sensors

For more information

#23 - Trident Towers - 4th Floor - 100 Feet Ashoka Pillar Road -

Corporate Marketing Office

2nd Block - Jayanagar - Bangalore - 560011 - India

Ador Welding Limited ,

Tel: (1) +91 8041132204/05 Tel: (2) +91 080 40818916

Akurdi Chowk , Chinchwad, Pune 411 019

E-mail: india@innovistasensors.com

Phone : 020- 4070 6000

Web: www.innovistasensors.com

Email: cmo@adorians.com

ENGINEERING REVIEW

APRIL 2016

www.engrreview.com

PRODUCT SHOWCASE

MECO “Solar Module Analyzer (Photovoltaic I-V Curve Tester) Model 9009” MECO offer Solar Module Analyzer, Model – 9009 The MECO Solar Module Analyzer is a portable analyzer used for testing, maintenance and finding efficiency of various parameters of solar panel and cell. Analyzer can be used to design Solar System to generate specific power. It can identify Solar Power System requirement, best angle of Solar Panel installation and Broken / WornOut cells. Solar Module Analyzer 9009 can scan solar cells/ panels upto 60V and 12A maximum. The portability of this device means that it is also useful in quality assurance at various stages on the production line and can be taken from one site to another. When used in the installation of solar panels, solar panel analyzer assists in determining the proper inverter size as well as optimum power output position of panels and helps to identify defective cells or panels that have worn out over time. The solar panel analyzer also provides the user with current and voltage (I-V) test curves, maximum solar power (Pmax) as well as current (Ishort, Imax) and voltage (Vnow, Vopen, Vmax).

Solar cell/ panel efficiency (%) is also easily determined using the unit. Solar Module Analyzer is supplied with user friendly software for Data Storing and Analysis. Users can store data (.CSV/.TAB) that can be read in MS Excel and print Waveform / Graph via printer.

Other features: Max. Solar Panel Power (Pmax) search by Auto-Scan : 60V, 12A, Best Resolution of 1mV-1mA, Memory Size 100 Records, Large LCD backlight, Communicate with PC via USB Cable, Manual AC Adaptor & Rechargeable Lithium Battery, I-V Curve with Cursor to Display each Data Point

ElMeasure’s Intelligent ACCL The power instability coupled with inefficient power distribution has created the need for backup power usually using a DG set. The manual switching of DG every time the utility supply fails leads to the disruption of key functions and causes damage to expensive equipment. To overcome this problem ElMeasure has introduced an Intelligent Automatic source change over with current Limiter (iACCL). The compact product is built with high precision microcontroller that offers automatic changeover between main supply and generator supply. iACCL allows supply from mains as long as the load current is below the programmed current. When the mains supply fails and stand by generator supply is on, it connects the DG power to each consumer in sequence & starts monitoring its load. Whenever the load current exceeds the allotment, power is automatically switched off for 10 seconds, and automatically restored. This cycle repeats for 5 times each time with double the time (20, 40, 80 & 160) and then enters into lockout mode until it is ‘Reset’ manually. This helps to protect

against over voltage from DG side. Its current limiting capabilities are ideally suited to the efficient utilization of the standby generators frequently used in multi-storied apartments, commercial complexes, etc.

Features: • Microcontroller based automatic source changeover with neutral isolation • DIN Rail/surface mountable for single phase and Surface mountable for 3 phase • SMPS based design for low power consumption • Intelligent re-connection once trip has occurred due to either over voltage or over load • Manual Reset provision when in sleep mode for restoring power supply • Energy, Current, Voltage measurement for DG & Current measurement for EB • Programmable threshold setting for both source independently • Over voltage protection for DG

For more information MECO INSTRUMENTS PRIVATE LTD. Haren Shah – Senior Marketing Executive (Mobile : 09820093232) Plot No. EL-1, MIDC Electronic Zone, TTC Industrial Area, Mahape, Navi Mumbai 400710. INDIA. Tel: 0091-22-27673311-16 (Sales), 27673300 (Board) Fax: 0091-22-27673310, 27673330 CIN NO. : U33120MH1969PTC014477 Email: sales@mecoinst.com

www.engrreview.com

Web: www.mecoinst.com

For more information ELECON MEASUREMENTS A Group of ELMEASURE INDIA PRIVATE LIMITED # 764, 4th Phase, 707, Yelahanka New Town, Bangalore - 560 064 Karnataka INDIA Ph : +91 80 28461777/28461744 | Fax : +91 80 41272461 E-mail: marketing@elmeasure.com Web: www.elmeasure.com

APRIL 2016 ENGINEERING REVIEW

157

PRODUCT SHOWCASE

The M12 Power L-coded Power Connector The new HARTING M12 Power offers sufficient power for energy-hungry applications in the field - while boasting a smaller design footprint. Consistent standardisation and new encoding allow users to save on space as well as interfaces. The ever greater “appetite for energy” in automation caused by a growing number of participants is making new concepts necessary. Besides signals and data, ever more power must also be supplied. In response, HARTING has participated in the development of new industry standards in order to make manufacturer-neutral mating faces a reality. The resulting new IEC 61067-2111 standard is the basis for future M12 Power connector solutions. The new, universal mating face with L-coding has also emerged from the adopted standard. At 63V/16A, the 5-pin L-coding achieves 0.75kW of power, making it ideal for small servo motors, field distribution boxes, fieldbus-controlled I/O boxes,

power supply devices and valve applications. The PNO views the M12 L-coded as the future standard equipment connector that is slated to completely replace the application area of the existing M12 A-coded and 7/8” solutions. Consequently, in future, a standardised and universal IP65/67 power connector will be able to be deployed. On the cable side, the wellknown HARAX IDC connectors and 360° shielded crimp terminals are available for straight male/female versions. Consequently, HARTING has taken into account a market requirement that extends even beyond the requirements of the relevant IEC 61076-2-111 standard. As a result, at all events this solution does justice to Industry 4.0’s “appetite for energy”.

For more information HARTING India Pvt Ltd, Delhi Branch India Mr. Abhishek Bimal, Assistant Marketing Communications Manager Statesman House, Office No. 1506, 15th Floor, Barakhamba Rd, Connaught Lane, Delhi 110001 Tel: +9650634777 abhishek.bimal@HARTING.com Web: www.HARTING.in

158

ENGINEERING REVIEW

APRIL 2016

Automatic Interlocking Trolley Aditron india noida offers automatic interlocking roller top trolies to reduce die change time to improve safety reduced efforts no height matching during die exchange savings 30 to 90 percent for dies / moulds/ jigs/ fixtures/ heavy tools from 20 kgs to 6000 kgs offering free consultancy

Roller Top Mechanical Trolley With Automatic Interlocking Facilities Special range of heavy duty mechanical roller top trolleys with automatic interlocking facilities , as soon as the operator pushes the trolley to

the press it gets interlocked at pre-fixed location will not move until the lock is released be the operator

DIE/ MOULD / JIGS . Fixture Storage Rack With Rollers 1/2/3 Tier Aditron manufacturing a large range of die/ mould/ jigs/ fixtures storage racks with rollers in different sizes and capacities. Die racks are with two rows of rollers like a rail track with little effort- of push or pull without any other equipment required to move, safety pins provided with chain.

For more information Aditron India Pvt Ltd. Dr. N. KUMAR Director A-23, Sector 57, Noida – 201301. Uttar Pradesh (India) Email : info@aditronqdc.com, aditronqdc@gmail.com Web: www.aditronqdc.com

Automatic Interlocking Trolley EXOR is a Global Manufacturer of HMI & HMI Control solutions focused on enhancing the “End-User Experience”. Since 1971, EXOR is a producer of high quality, innovative, and visually appealing Human Machine Interface solutions. Our 40+ years of experience have led us to our flagship offer, JMobile Configuration Software, Series 500 Resistive Touch HMI, and Series 600 “True Glass” Capacitive Touch HMI. JMobile, alongside our 4+ decades of manufacturing excellence, offers industries’ finest flexibility, connectivity and portability; Web & Network enabled HMI solutions for secure control & data, anywhere, from any

device. EXOR’s “modern” tool set allows for crafting a more visually appealing, better “EndUser Experience”. A true partner solution wrapped in EXOR engineering and support services with the confidence of a 5 year Warranty.

Hardware Highlights: • High Quality Machined Aluminum Casing • Class 1 Division 2, ATEX • Coated Boards for High Heat & Moisture Resistance • IP66 & IP69K, Outdoor Rated, Sunlight Readable (-20c to 60c Temp Range)

JMobile Highlights: www.engrreview.com

PRODUCT SHOWCASE • Fully Scalable, Vector Graphics & Large Widget Library • Built in Remote Monitor & Control from any PC, Smart phone, or Tablet • Powerful JavaScript & XML

engine w/ Dynamic Widget properties • Email Functionality w/ Process Data • Offline and Online Simulation

Fasteners for Electric & Electronics item manufacturing unit 4/42

For more information Exor India Pvt Ltd Mahesh Gurav, Manager - Technical 228, 2nd Floor, Platinum Techno Park | Plot no: 17 & 18, Sector 30A / Vashi, Navi Mumbai 400 705| India (Office) (91) (22) 2781 0422 / 0423 / 0424 Email: mailto:mahesh.gurav@exorindia.com/ Web: http://www.exorindia.com

Welding carriage

These Welding carriage are used for Automatic Welding of Fillet, Butt, Joints in different Welding Position. GMAW/ FCAW process is normally used along with these kind of carriage. These carriage uses permanent magnet to hold on to the Job and can be used

in different Welding position depending on the Tractor Force of the magnet used. Either guide wheel or the track are used to move the trolley along the Weld Seam. Weaving & Weaving pattern are available on some model to realize the required Weld Beads.

For more information WARPP ENGINEERS PVT LTD B-1005, Western edge-II, Near Metro Cash & Carry, Western Express Highway, Borvali (E), Mumbai-400066 Tel : 8080808737, 28542272/73/74, E-mail: sales@warpp.co.in, salessupport@warpp.co.in, Website- www.warpp.co.in

www.engrreview.com

We have developed Stainless Steel Industrial Fasteners C/F, H/F & Turned Process from materials S.S. 202, 303, 304, 316 & 410. Eye Bolt, Bolt Nut Washers, Hex Nut, Dome, Nylock, Wing, Sq Nuts, Plain & Machine Washers, Spring, Star, Disk Fan, Circlip, Hex Socket type Allen Sc, Hex Socket & Slotted type Grub Sc, BSP, BSPT/ NPT, Tapper plug, Hex hd Coller plug, Allen plug, BSP Nuts, Philips Star Punch and Slotted type machine screws, Self Tapping Screws, Rivet, Stud, Full Thread Stud, Sq hd Bolt, T-Bolt, Coach Bolt, Tapper Pin, Solid Dowel Pin, Grooved Pin, Spring Dowel Pin, etc. Fasteners as per

sample or drawing.

STANDARD REFERENCE:It can be supply as per IS, BS, JIS, DIN, ISO, ASTM Standard & as per drawing or sample.

THREADS:MM Size Coarse & Fine Pitch, BSW, BSF, UNC, UNF, BSP, BA No. size 4 to 12 no. & STS Sc 2 no. to 14 no.

APPLICATIONS:Chemical, Sugar Plant, Pharmaceuticals, Fertilizer, Paper Machinery, Machine Tools, Engineering Industries, etc. & other service Industries.

Fasteners for home appliance manufacturing unit 22/42 We have developed some type of Fasteners Components which are useful above mfg. unit components are Philips Star Punch & Slotted Machine Sc, Shim Sc, Terminal Sc. BT-cut Screws, Rivet, Tapper pin, Dowel pin, Spring Dowel pin, Stud, Eye Bolt, Hex Bolt Nut washers, Machine Bolt, Nut

- Lock, Std Hex Long, Dome, Nylon, Weld Flanged nuts, Washers-Plain, Spring Star, Disk Fan, Bearing Washers, Wave Washers, Circlip, Knurled, Safety Lock Washers Hex Socket type Allen Sc, Grub Sc Hex Socket & Slotted, etc. and other items as per drawing or sample.

APRIL 2016 ENGINEERING REVIEW

159

PRODUCT SHOWCASE

• Where extremely fast cable laying is required • For high fill levels • Where an extensive unsupported length is required • Where rigidity is required • For low noise applications

STANDARD REFERENCE:-

FINISHING:-

As per IS, BS, JIS, DIN, & ISO or as per drawing or sample.

Bright Zinc - Silver & Blue shades, Yellow Zinc, Olive Green, Copper Zinc, Cadmium, Nickel, Blackened, Natural Finish.

THREADS:MM Size, BSW, BSF, UNC, UNF, BA & No. Size 4 to 12 NC/NF, Self Tapping Sc 2No. to 14No.

MATERIAL’S GRADES:M.S., HTS 8.8, 10.9, Brass, Copper, SS 304-316, Nylon, Phosphor, Bronze & Fiber.

Features

APPLICATIONS:T.V., Refrigerator, Air Condition, VCR, DVD-Tape Record, Washing Machine, Computer, Electrical Switches, etc. and other unit.

Fast and easy installation of cables and hoses

Very high filling level

High side stability

Divider systems for reliable cable separation

For more information ZENITH INDUSTRIAL PRODUCTS | ABC INDUSTRIAL FASTENERS E-122, Ansa Industrial Estate, 1st Floor, Sakivihar Road, Sakinaka, Andheri East, Mumbai - 400 072 Tel.: 022-2847 0806 / 2847 0705 / 6692 3987 E-mail : zenith@zip-india.com / abc@precibolts.com Website:- www.zip-india.com

Kabelschlepp India Pvt Ltd B-14, ITI Ancillary Industrial Estate

EasyTrax

Mahadevapura (P.O), Bengaluru-560 048

Extremely fast cable laying thanks to easy cable insertion 1. Sturdy two-component design: hard cable carrier body, flexible film hinge 2. Chain links made of plastic 3. Extensive unsupported length 4. Inside space is gentle on the cables – no interfering edges 5. Extremely low noise due to

160

ENGINEERING REVIEW

For more information

APRIL 2016

integrated noise damping 6. For inside/outside opening 7. Dividers and height separations for cable separation 8. Single-part end connectors with and without integratable strain relief

Example of inner distribution: Selection criteria for EasyTrax

Phone: +91-80-41158997, Fax: +91-80-41158998 EMail: mail@kabelschlepp.in, Website: www.kabelschlepp.in

NEW portable digital multi parameters reading type digital surface roughness tester : Multi-parameter measuring: Ra、Rp、Rv、Rt、Rz、Rq、Rsk、Rku、Rc、RPc、RSm、Rmr(c)、tp、Rmr、Rpm、Rz1max、RzJIS、Rmax、Htp、R、c、

、RΔq、RΔa、Pa、Pp、Pv、Pt、Pz、Pq、Psk、Pku、Pc、PSm、Pmr(c)、Pmr、Pz1max、PzJIS、P、c、PΔq Rk、Rpk、Rvk、Mr1、Mr2

www.engrreview.com

PRODUCT SHOWCASE Surface curvature: convex 1.5 mm / concave 7 mm Minimum test surface: Φ8mm Minimum thickness of base material: 0.4mm Operation Condition(not in high magnetic field): Temperature: -10 to 50 Deg. C / Humidity: 20%RH-90RH Product Size: 166 x 68 x 30mm Weight: 180g (batteries

included)

Standard Individual Packing: Fe / NFe probes, Set of plastic test shims and 2 reference calibration plates (Steel and Aluminum), Hard shell storage case, Instruction manual. & Calibration Certificate , Tracable to NPL-Delhi .

For more information 、A1、A2、 High accuracy inductance pickup;, Graph, Software, Data cable .

Technical Specification : Range: 400 Microns, Resoluation: 0.001 to 0.008 Microns,

For more information India tools & Instruments co.MUMBAI Tel: 09819345050/022-23428862 E-mail: ojus_itico@hotmail.com Web: www.indiatool.net

Portable Digital Coating Thickness Gauge (For General Purpose & SPECIALY for NICKEL Coating on Steel ) Overview NEW Portable Digital Coating Thickness Gauge Model : ITI – UCTG is a highly intelligent and precise instrument used to quickly and accurately measure thickness of coating or plating on almost all kinds of metal surface. It not only indicates thickness of coating or plating but also automatically identifies the base material. It is applicable to measure non-magnetic painting, ceramic, enamel, plastic, rubber coating on magnetic base materials such as iron and steel , non- ferrous metal plating such as nickel & chromium, anticorrosive coating, nonconductive painting, plastic

www.engrreview.com

coating and anodic oxide film on non-magnetic conductive devices

Function: Specification : Range: 0-1250μm /0-50mil Resolution: 0.1μm/mil Accuracy: ±(2%+2μm) / ±(2%+0.1mil) Display: TFT 320 x 240 LCD Test Limits:

India tools & Instruments co.MUMBAI Tel: 09819345050/022-23428862 E-mail: ojus_itico@hotmail.com Web: www.indiatool.net

NEW Portable Digital METAL Hardness Tester with New Technology - AUTO LOAD system Applications • Most suitable for testing of thick and heavy metal parts with uneven surfaces • Most suitable for testing of thin and light metal parts and for superficial testing • Measuring the hardness value of different metals in different shapes, metals which are too heavy and bulky to move, metal parts of large-scale machinery, metal pipes and CNG capsules, metals in small spaces, in production lines and during different stages of the production process, welding links, architectural structures, fuel transportation pipes & Many Other application. • Non-destructive testing (NDT) where only a slight trace of hardness test will remain on the surface

•

Features : • The device could be used

for hardness measurement at different angles and directions. It is applicable for hardness measurement of a wide range of metals including cast steel, Cold Work Tool Steel, ductile cast iron, grey cast iron, aluminium, brass, and copper. The device can display the hardness value in all common hardness scales such as HB, HV, HLD, HRC, HRB The user can convert the measured hardness value into other hardness scales using the device’s keyboard and conversion tables. The impact body could be removed in cases where the device dimensions make the

APRIL 2016 ENGINEERING REVIEW

161

PRODUCT SHOWCASE measurement difficult or impossible. • The user can calibrate the device by himself using the reference test block. • The device can instantly display the hardness value measured as well as the average value in different measurement tests. • It can also display the minimum and maximum hardness values measured in different tests.

• The device performance and functionality are not affected by magnetic fields. • It enjoys an automatic power-off system to optimise battery usage.

Email : tulex.sales@gmail.com

Calibrated Test Block, Two Attchments for Checking on Different shapes of Jobs, Charge-adapter , Software, Data cable , Calibration Certificate in Portable Bag.

Web : www.tulextools.com

Tel: 09819345050/022-23428862 E-mail: ojus_itico@hotmail.com Web: www.indiatool.net

Tulex adjustable click type Torque Wrenches

ENGINEERING REVIEW

APRIL 2016

TULEX INDUSTRIAL TOOLS PVT. LTD (An ISO 9001-2000 Certified Company)

India tools & Instruments co.MUMBAI

162

Drivers, Slugging Wrenches, Took Kits, etc are also manufactured by us.

For more information

Consist: Main Unit,

For more information

Tulex Torque Wrench is a calibrated tool recommended for use in controlled tightening of nuts & bolts to avoid over/ under stressing. Tulex Torque Wrenches are preset / adjustable click type torque wrenches which are available in ratchet and non-ratchet types. Tulex torque wrenches are compact, lightweight and rigid to suit the heavy duty working conditions existing in Indian Industry particularly the automobile sector and other critical industries. Tulex Torque Wrench is a fast acting precision spanner cum instrument of an entirely new design for tightening of bolts and nuts to the required Torque. The Torque Wrenches are available in a set of 12 models covering Torque requirements from 3 to 2500 Nm. Tulex

Extension Bars, Reversible Ratchet Handles, Hex Adaptors, Universal Joints / Sockets, Hex

Torque Wrenches are calibrated to an accuracy ±4% on calibrators and our equipments are traceable to National Physical Laboratories, an important pre-requisite for ISO 9000. Each and every Torque Wrench is accompanied with its Calibration Certificate. These are also traceable to National Standards and we guarantee our Torque Wrenches against any premature failure. Tulex Torque Wrenches are also available in special production models to suit exact Torque requirement and critical applications that do not have direct access. Industries where Torque Wrenches are used: Automobile, Heavy Engineering, Power Plants, Petrochemicals, Fertilizers, Aeronautics, Defence Organisations, etc. etc. Industrial Hand Tools like Sockets (Manual & Impact), Special Application Sockets, Square Drive Adaptors,

Digital AC T-RMS/DC Clamp meter with 50,000 Counts Multimeter DT-3381 CEM DT-3381 is a 1000A TRUE RMS AC/DC Full Function CLAMP METER with 50,000 COUNTS MULTIMETER Integrated Non Contact Voltage Detector and Dual Input Thermometer for K type thermocouple. The Non Contact Voltage Detector is provided to quickly check for the presence of live wires before testing. It can measure 500A and 1000A Current AC / DC. This Digital Clamp meters offers all the specifications required by any field engineer working on-site at incoming power site. These are very elegantly designed, perfectly fit into hand and can be used to access tight places for testing. The large backlit LCD with high display count of 50,000 provides precise and accurate readings with details till the last digit. The bright backlit and bright flashlight in the clamp, makes it easier to use in dark areas. These clamp meters confirm to CAT-III 1000V, CAT-IV

600V and are TUV & GS Approved. They confirm to EMC & LVD, EN:61326, EN:61010-1, EN:61010-02-031 The dual input thermometer with K type inputs for temperature, with differential temperature function, makes it all the more useful for all field use. It has Data Hold Plus Peak Hold of Current Surges During Motor Startup. Can measures Motor Capacitors to 5,000μF, has 49 mm (1.9”) Jaw Opening for Conductors up to 500MCM. It is Auto-ranging with Manual Override. The special feature of measuring AC/DC μA Multimeter Function for HVAC Flame Rod Current Measurements. This has Max/Min Record Functions and Relative Measurement functions along with Data Hold, Peak Hold, MAX/MIN record functions

For more information CEM INSTRUMENTS (INDIA) PVT. LTD India Office: 32A, Ganesh Chandra Avenue, 4th Floor, Kolkata – 700013 West Bengal Tel: +91-33-22151379 / 22159759; Email: info@cem-india.com; info@cem-instruments.in Website: www.cem-india.com; www.cem-instruments.in

www.engrreview.com

POWER » BUSINESS NEWS

Solar installations in India to Double in 2016 with more than 4 GW, Reports Mercom Capital Group Mercom Capital Group, a global clean energy communications and research firm, today released its quarterly update on the Indian solar market. Mercom forecasts more than 4 GW in total solar installations for the 2016 calendar year, nearly 100 percent year-over-year (YoY) growth from the 2015 total of 2,133 MW. “The Indian solar sector is finally coming out of hibernation,” said Raj Prabhu, CEO and Co-Founder of Mercom Capital Group. “Solar installations in 2015 increased by 142 percent after three years of remaining flat, and we expect 2016 and 2017 to record strong growth.” There are currently just over 10 GW of solar projects under development, with cumulative solar installations in the country totaling 5,632 MW and about 8.4 GW expected to be auctioned off over the next few months. “There is cautious optimism in the solar industry as aggressive bidding remains a major concern throughout the sector,” said Prabhu. The latest auctions have hit new lows at ₹ 4.34 ($0.064)/kWh, a drop of about six percent in the last three months. Projects with

www.engrreview.com

tariffs under ₹ 5 (~$0.0735)/ kWh, unless built at a cost of ₹ 5 crores (~$0.7 million) or below, are considered extremely risky and difficult to finance by lenders and most developers. But most of these projects are, however, expected to be commissioned in 2017 and developers hope that in the time period between bidding and procurement, module and balance of system (BOS) costs will continue to drop along with interest rates to make these projects feasible. The recently announced budget did not have much for the solar industry to cheer about. Accelerated depreciation will be reduced from 80 percent to 40 percent beginning in FY 2017. This reduction will mostly affect rooftop solar, some largescale projects and the wind sector. The Clean Environment Cess [formerly known as the Clean Energy Cess (tax)] has been increased from ₹ 200 (~$3)/ ton to ₹ 400 (~$6)/ton. This increase will make solar more competitive by increasing the cost of coal. But, increased costs are expected to be eventually passed on to consumers in the form of higher electricity bills.

Furthermore, nearly half of this tax in the past has gone to the Ministry of Water Resources for the Ganga rejuvenation project and we cannot assume that the entire amount collected from the new coal tax will go towards renewable energy.In January, the Union Cabinet approved amendments to the revised tariff policy. One of the most significant revisions is a Renewable Power Obligation (RPO) which would require that eight percent of electricity consumption be procured from solar energy by March 2022. This is an important step towards achieving the 100 GW goal, but the RPO will remain just a number without strict enforcement. The World Trade Organization (WTO) has recently ruled against India’s domestic content policy for solar cells and modules which was originally filed in 2013. In the short term, this will affect manufacturers who

are overly dependent on the Domestic Content Requirement (DCR) market. In the long term, the effect should be minimal as DCR projects are a small part of the projects auctioned; manufacturers now have clarity and can adjust their strategy accordingly in order to compete. The Indian government is expected to appeal the ruling. “Restricting the use of cheaper non-domestic components while expecting solar power at the lowest possible price has never made sense,” said Prabhu. For more information www.mercomcapital.com

APRIL 2016 ENGINEERING REVIEW

163

BUSINESS NEWS » POWER

Suzlon wins order of 71.40MW from Gujarat Industries Power Company Ltd. The Suzlon Group, one of the leading global renewable energy solutions providers in the world, announced its maiden order win for 71.40MW wind power project from Gujarat Industries Power Company Ltd (GIPL), a leading Gujarat based public sector undertaking engaged in the business of electrical power generation. Suzlon will install 29 units of S97-120m Wind Turbine Generators (WTGs) with all steel hybrid tower and 5 units of S9790m WTGs with tubular tower having rated capacity of 2.1MW each. Located in Kutch district, Gujarat, the project will be completed in three phases with execution culminating by April 2017. Suzlon will execute the entire project on a turnkey basis and will also provide operation and maintenance services for a period of 20 years through an integrated service package. Suzlon has more than two decades of experience in wind sector and maintains and

services more than 9GW across India, accounting for nearly 37% of the country’s total installations. As of March 2015, Gujarat’s total wind installations stand at 3,645MW, out of which 1,742MW has been contributed by Suzlon. Suzlon’s wind energy installations in Gujarat offset approximately 3.5 million tonnes of CO2 emissions, thereby supporting the transition of the state to a sustainable energy mix. The S97 series of 2.1MW WTG feature the time tested Doubly Fed Induction Generator (DFIG) technology which is designed to maximise generation at lower wind sites. It not only delivers higher energy output, but also offers higher return on investment for our customers. At a height of 120 meters the S97-120m is the Worlds’ tallest All-Steel Hybrid tower which combines both lattice and tubular structures, designed indigenously to harness the

enhanced availability of wind resources at higher altitudes making low wind sites viable. The combination of lattice and tubular gives enhanced tower strength at lower cost. The three-dimensional lattice structure can support heavier weights due to the broad base and reduces the steel requirement apart from being logistic friendly. The prototype, set up in November 2014, at Kutch, Gujarat, achieved a PLF of 35%. It has successfully generated 6.42 million kWh over the first 12 months of operation. The evolutionary product has received an encouraging response from customers across segments and reflects in the ~600MW orders received till date. Mr. Ishwar Mangal, Chief Sales Officer, Suzlon Energy, says, “Gujarat has been at the forefront of generating power through renewable energy sources and Suzlon has played

a pivotal role in contributing to its renewable energy portfolio. We have developed one of Asia’s largest wind parks at Kutch (Gujarat) with current capacity of over 1 GW as at 31st March and ongoing further installations. We are pleased to partner with Gujarat Industries Power Company Ltd. (GIPL) for driving their commitment towards sustainable and affordable energy. We are thankful to GIPL for the confidence reposed in Suzlon and its technology. With our comprehensive product portfolio, robust in-house R&D and more than 2 decades of experience in providing end-to-end solutions to customers alongwith integrated maintenance and services, we are best equipped to pursue our focus on bringing down the cost of energy” For more information Web: www.suzlon.com

Welspun Renewables’ Builds-up its investments in Punjab, Expands Solar Portfolio Welspun Renewables, India’s largest solar energy generator, has expanded it solar capacity in Punjab by 4 MW (AC). The latest addition comes close on the heels of its 32 MW (AC) Bathinda solar project. Committed to facilitating Punjab’s green energy transition, the two projects combined together will be annually feeding 54.37 million units of clean energy to the grid. Consequent to this, Welspun

164

ENGINEERING REVIEW

APRIL 2016

Renewables will be offsetting 1,481,525 tonnes of CO2 emissions over the next 25 years. Mr. Vineet Mittal, Vice Chairman Welspun Renewables said, “We believe that it’s our responsibility to help India meet her development needs by integrating ecological sustainability. Sustainable development of the people can only be ensured if we focus on clean energy and move away from polluting energy

sources. With each project the organization commissions; we are helping the country move closer to meeting its clean energy targets. Like all our projects before, this latest capacity addition too was commissioned well before the committed timelines. Given our engineering expertise, I am confident this project will be performing optimally. ” Earlier this financial year, Welspun Renewables had

commissioned state’s largest solar project of 32 MW (AC) capacities. Given its significance it was dedicated to the nation by Sardarni Harsimrat Kaur Badal, Hon’ble Union Cabinet Minister of Food Processing, Government of India and Sardar Bikram Singh Majithia Hon’ble Minister for New & Renewable Energy, Government of Punjab. For more information www.welspunrenewables.com

www.engrreview.com

POWER » BUSINESS NEWS

IEEMA welcomes Government’s intent for balanced & inclusive growth Indian Electrical and Electronics Association of India (IEEMA) welcomed the Union Budget 2016-17 announced by the Hon’ble Union Finance Minister as a balanced budget. Shri Babu Babel, IEEMA President stated, “The budget is in continuation of Government’s commitment to provide 24 X 7 Electricity For All, with increased allocation in the power sector. The focus on augmenting Nuclear Power with an allocation of INR 3000 crores is a welcome step and reflects the government’s intent to achieve the right fuel balance. While the Finance Minister has not gone overboard to make some populist announcements; yet he did his best to strike a balance between shortterm growth and sustainable economic gains and has done

a great balancing job. This will give a big boost to the infrastructure and rural sector. “With a budgetary outlay of INR 79,884 crores to the power sector in the new Budget there is an increase over previous year. The electrical industry is hopeful that the Government will take all steps to ensure that there is full utilisation of funds allocated”, Mr. Babel said. “Substantial emphasis is given to Stand up & Start Up India to make it a reality. A large section of the society, with lack of opportunity, shall benefit out of this.” He added. The industry welcomed the Government’s commitment to achieve 100% village electrification by 1st May, 2018. A fund allocation of INR 8,500 crores was allocated, out of which INR 3,000 crores and

INR 5,500 crores was allocated to Deendayal Upadhyaya Gram Jyoti Yojana and Integrated Power Development Scheme respectively. The proposal to increase the Presumptive Taxation Scheme for MSMEs from INR One crore to INR two crores will bring big relief to a large number of assesses in the MSME category. Shri Sunil Misra, Director General, IEEMA said, “The budget 2016 - 17 addresses Skill Development and new job creation, with 1500 Multi Skill Training Institutes proposed to be set up under Pradhan Mantri Kaushal Vikas Yojana, across the country with an amount of INR 1,700 crores. Moreover, the proposal to set up a National Board for Skill Development Certification in partnership with the industry and academia is encouraging,

which will train one crore youth over the next three years, further benefitting the manufacturing sector. This will also result in uniformity of growth and development across the country.” “IEEMA echoes the The Make In India and Skill India campaigns of the Government. This conforms to IEEMA’s objectives to promote domestic production and focus on exports through its ‘Made In India’ proposition,” Mr Misra added. The industry eagerly awaited for announcement of a roadmap for implementation of the Goods & Services Tax (GST) regime, which will positively impact complicated tax issues and boost productivity and business development. However, there was no mention about the same.

Mitsubishi Electric to exhibit at ACREX 2016 Mitsubishi Electric India announced that it will exhibit the complete range of ecofriendly and energy efficient products and technology of Air Conditioning Systems at the 17th edition of the ACREX India 2016 that will be held from February 25 to 27 at Bombay Convention and Exhibition Centre (BCEC), Mumbai. Mitsubishi Electric booth, located at Hall no.1 A, Stall no. 5, will present the company’s initiatives to become a global, leading green company contributing to low-carbon, recycling-based societies. A

www.engrreview.com

wide range of energy saving products and technologies under Air Conditioning Systems like Room Air Conditioners, Packaged Air Conditioners, City Multi VRF Systems, Jet Towel Hand Dryers would be on display and are expected to catch the viewer’s attention at ACREX India 2016. Other categories on display would be key ventilator products, Compressors and controllers. The Mitsubishi Electric India booth will also witness the launch of one of their Air Conditioner product under the MSZ-F series which is

designed for Optimum cooling/ heating performance as well as operational comfort. The advanced function of this series is its lucrative feature which will be explained and can be experienced at ACREX India 2016. Advanced functions such as “3D i-see Sensor” are known to help in temperature control and the plasma quad air purification system raises room comfort levels to new heights. Mr. Takashi Nishikuma, Director and Business Unit Head of Air conditioners, MEI said “I invite everyone to our stall at Bombay Convention

and Exhibition Centre (BCEC), Mumbai. We are displaying the best of Mitsubishi Electric Air Conditioning System products other than the launch of MSZ-F series which will be at working demonstration to make you experience the best of Japanese technology”

For more information: Web: www.mitsubishielectric.in

APRIL 2016 ENGINEERING REVIEW

165

BUSINESS NEWS » POWER

EXLUX linear luminaires from R. STAHL: Latest lighting technology in tried-and-tested fitting

Energy-efficient general lighting retrofits in any climate are straightforward with R. STAHL EXLUX 6002/6402 series linear luminaires

Despite a familiar appearance due to their tried-andtested fitting design, R. STAHL 6002 and 6402 series linear luminaires use the latest LED technology inside. Suitable for ceiling installation, use as pendant lights, or pole mounting, these explosion-proof devices enable particularly energyefficient general lighting in zones 1, 21, 2 and 22. Their familiar form factor ensures that changing over from traditional linear luminaires with fluorescent tubes to LED light sources is an especially straightforward process. In photometric terms, one 52 W luminaire is fully equivalent to two conventional 36 W fluorescent lamps. However, up to 100,000 hours of operation mean they achieve a far superior service life, as well as a high

166

ENGINEERING REVIEW

APRIL 2016

luminous flux of up to 5800 lm and excellent luminaire efficiency of well over 100 lm per W. In addition, thanks to their slim, low-profile GRP housing, the lights weigh at least one third less than widely available competing products in the same class. Series 6002 models feature “increased safety” (Ex e) type of protection, while 6402 series luminaires are “nonsparking” (Ex nA). Notable for their very robust IP66/ IP67 design, the products can be used at environmental temperatures ranging from -30 °C to +55 °C. Both series feature very economical 28 W or 52 W standard versions. They are available with or without diffusers in lengths of 700 mm and 1310 mm. The

current R. STAHL lighting solutions campaign provides instructive information on all crucial benefits of LED lighting compared with conventional light. The campaign website, www.stahlexplorers.com, not only features background information on LED technology and the latest news on lighting solutions, but also a series of actionpacked short clips showing luminaire operation in truly extreme conditions. For more than 80 years, R. STAHL has been a trendsetting manufacturer of safety technology for hazardous areas. Based in Waldenburg, Germany, the company is one of the world’s leading suppliers of explosion-protected automation, control and

distribution, installation, operating and monitoring, lighting, signaling and alarm components and systems. Key products include customerspecific systems solutions for hazardous areas. R. STAHL’s individual packages containing tailored product combinations and a wide range of services such as consulting, project planning, engineering and training courses for customers are designed to fully meet application requirements and customer needs. International certifications, approvals and patents demonstrate the company’s expertise and allow for R. STAHL’s products to be used throughout the world.

For more information Web: www.stahl.de

www.engrreview.com

POWER » BUSINESS NEWS

Sterling and Wilson solar division opens office in Lagos, Nigeria continuing its aggressive Africa expansion strategy

One of the top Global solar EPC solution provider, Sterling and Wilson, continues its aggressive expansion strategy throughout the Africa region. Sterling and Wilson’s Solar division has revealed its plan to setup four offices in Africa by end of 2016, beginning with Lagos Nigeria, before moving to Dar es salaam in Tanzania, followed by Kenya and Ghana. Sterling and Wilson, Solar division already has substantial presence in Cape Town and Cairo. Sterling and Wilson will employ local talent for running

www.engrreview.com

its new operations in Lagos. The company has already announced plans to execute EPC works for 500 MW of solar photovoltaic (PV) plants across different parts of Africa in the next three years. “We believe Sterling and Wilson is well positioned for expansion as more investors are focusing aggressively on the African Solar Market” stated Bikesh Ogra, President Solar EPC business for Sterling and Wilson. “The industry is growing rapidly and we will continue to expand strategically to meet demand.”

With solar power uptake on the African continent predicted to surge over the coming years – 100 gigawatts (GW) of solar installations are forecasted by 2030 – the expansion is clearly intended to ride the growing wave of the grid connected solar energy market. Sterling and Wilson is confident to attain market leader position supported by their proven track record and global reputation. The company provides 360 degree turnkey solutions adapted to each customer’s individual needs that exceed customer expectations,

transforming solar energy into green assets by maximizing value and mitigating risks. The company is already working on number of opportunities with various developers in Kenya, Zambia, Ghana, Mozambique, Algeria, Namibia & Morocco along with South Africa & Egypt. The Indian firm has more than 500 MW of operational solar plants and another 1500 MW of projects under pipeline.

For more information www.sterlingandwilson.com

APRIL 2016 ENGINEERING REVIEW

167

BUSINESS NEWS » POWER

Lapp India Receives ISO 14001: 2004 Certification Lapp India, a 100% subsidiary of the Lapp Group, Germany and a leading supplier of integrated solutions and branded products in the field of cable and connection technology in India has received ISO 14001:2004 certification from TUV Rheinland. ISO 14001: 2004 certification is an internationally recognized standard for environmental management of businesses. The certification helps organizations minimize their impact on the environment, comply with applicable laws and regulations and work towards continual environmental improvement. The certification has been awarded to Lapp India for successfully implementing and incorporating international standards of Environment Management System (EMS) initiative as its corporate way of life. As a responsible corporate citizen, Lapp India provides assurance to employees, company management and other stakeholders that the environmental activities are being measured and improved. Going forward, the company will invest in further measures in providing a healthy social and occupational environment for its employees, customers, vendors and the society at large. “This Certification is a milestone achievement for Lapp India and reflects Company’s long-term commitment in achieving our environmental responsibilities. Conformance to International Standards will instill confidence in our customers, of our products’ safety, reliability and quality. Attaining standards such as ISO 14001

168

ENGINEERING REVIEW

APRIL 2016

will enable us to formalize energy management within our own operations”, said Mr. Marc Jarrault, MD, LAPP India. Cables are an integral part of our homes, offices, public space and industries. To avoid mishaps and accidents, Lapp cables are coated with a unique thermal compound and are halogen-free which ensures 80% visibility during a fire outbreak. These cables generate less smoke with low generation of corrosive and toxic gasses. Its low fire propagation characteristics ensure a safe evacuation process during emergency situations. Lapp India is committed towards improving its environmental performance and strives to improve energy efficiency. As part of its commitment towards sustainable green environment, Lapp India manufactures environmentally-friendly products such as HFFR single core (UNIPLUS HFFR and INFRA HFFR), HFFR multi core flexible cables and Fire Survival Cables. A performance program is in place that minimizes scrap of copper and compound during manufacturing. We also focus on efficient waste segregation at source and disposal, including STP (sewage treatment plan) Lapp India is actively contributing to renewable energy by committing to install 1/3 of solar capacity and supplying extensively to wind mills. The organization has undergone a meticulous procedure for implementing a gamut of awareness drives for imparting EMS related

training to its employees and vendor partners. Adhering to an extensive assessment procedure, Lapp India has raised the bar for health, safety, security and environment in the wire and cable industry. During this Certification process, Lapp India employees were given the opportunity to understand how their work affects the environment, and to develop practices and technologies that improves environmental health.

About ISO 14001: 2004 certification ISO 14001:2004 sets out the criteria for an environmental management system and can be certified to. It maps out a framework that a company or organization can follow to set up an effective environmental management system. It can be used by any organization regardless of its activity or sector. Using ISO 14001:2004 can provide assurance to company management and employees as well as external stakeholders that environmental impact is being measured and improved.

About Lapp India Lapp India is a 100% subsidiary of the LAPP GROUP Germany, is a leading supplier of integrated solutions and branded products in the field of cable and connection technology. Having started its operations in 1996 with a manufacturing unit in Jigani, Bangalore Lapp India provided in 2014 about 120,000 km per year of control, instrumentation,

power and data cables along with connectors, accessories and End to End Systems to over 3000 customers pan India spread across different industry segments such as automation, textile, automotive, machine tools, oil and gas, renewable energy, process industries, as well as in the infrastructure and building sectors. 23 Sales offices close to customers all over India • 300 employees committed to best serve customers • Strong Network of 146+ dealers • 2 top of the notch manufacturing units Bangalore and Bhopal • State of the Art Laboratory • Fully fledged Technology and innovation center In 2012, Lapp India completed phase 1 of its second manufacturing plant in Pilukedi, Bhopal which produces more than 216,000 kms of single core cables per annum, catering mainly to the Building Cable Segment. The production area at Jigani was also doubled in 2014 and a new multi core line was commissioned in Bhopal with a total investment of over 5 Million Euros. Lapp brands – ÖLFLEX®, UNITRONIC®, ETHERLINE®, HITRONIC®, EPIC®, SKINTOP®, SILVYN®, FLEXIMARK® – are some of the best-known in the cable technology field and have earned an outstanding reputation as premium products. All over the world, they stand for the values which Lapp and their customers consider paramount: quality, precision and reliability.

www.engrreview.com

POWER » BUSINESS NEWS

TPV launches new technology of Philips Digital signage solutions in India Philips brand is based on three core values to serves the customers worldwide: Caring, Innovative and Impactful. So every Philips products including the signage features some interesting services for customer satisfaction. Philips has developed an advanced feature called Smart Control to provide the customers with customized solution to meet the specific business requirements. The solutions are equipped with features like full HD, extremely narrow bezel, Touch Screen, USB, 3D display, OPS slots and additional Connectivity Options. The products also offer best in class power saving options conforming to Energy Star standards, C-Tick, cUL, CE and RoHS compliance. Philips, the world leader in providing visually stunning and technologically advanced Digital Signage solutions, launches its Wide range of Signage solutions and Video Wallsfor Indian Market. Marketed by MMD, a subsidiary of TPV Technology Ltd,the Philips signage solutions are designed for stunning visual exposure through wide display for various public locations and offer a variety of spectacular features for a superior display experience. The Philips Digital Signage Solutions were launched in India in 2012 and now the company has announced the launch of revolutionary XL Series (Video wall) of signage solution with brightness of500/700 cd/m2, with OPS module and Smart Insert features. This is a perfect semi outdoor display device for commercial displays. The Video wallszero bezel displays,customizable in a formation of up to 15 x 10 displays. Compared to the competitors, these walls have ultra-narrowbezel, whichensures no gap in between the pictures, to provide incredible illustrations

www.engrreview.com

of the video images. Speaking about the launch Mr. Saurabh Grover, Country Head–TPV India said, “The global signage market with a growth of 8 percent CAGR is expected to reach$24 Billion by 2020. The Indian market, since last 5 years has shown unprecedented growth driven byincreased advertisement budget, infrastructural development, government initiatives and exciting digital content. Currently the market is growing at 25% CAGR growth and this is only expected to rise further. We at TPV see this as a great opportunity and expect to penetrate in maximum business segments with strong need for display solutions.” Also speaking on the occasion, Mr. Rob Fowler, MMD Sales Director Asia Pacific, added, “Philips has numerous solutions of signage available in the international markets. In terms of quality and built, our range of video walls isone of the best fitted solutions available in the markets today.” Philips brand is based on three core values to serves the customers worldwide: Caring, Innovative and Impactful.

So every Philips products including the signage features some interesting services for customer satisfaction. Philips has developed an advanced feature called Smart Control to provide the customers with customized solution to meet the specific business requirements. The solutions are equipped with features like full HD, extremely narrow bezel, Touch Screen, USB, 3D display, OPS slots and additional Connectivity Options. The products also offer best in class power saving options conforming to Energy Star standards, C-Tick, cUL, CE and RoHS compliance. Philips solution has other various categories like QL/ EL/VL/XL& T Series. These products serve the entry to high-end levels of requirements though LCD and LED series. Philips Signage also comes with Smart CMS (Content management software);which help the user to create and schedule their own content over 24 hours every day. HCL Infosystems Limited is the authorizedNational distributor forPhilips digital Signage solutions in India. On the occasion of launch Mr. Vimal Das, Vice President,

HCL Infosystems Limited,said, “We are excited about this new product line as there is a huge demand of Video Walls these days and Philips design and technology will definitely appeal to the customers.” TPV has a strong after sales service network with 110+ service centers & 68 installation providers, which ensures fast and uninterrupted function of signage solutions. About MMD: MMD, a subsidiary of TPV established in 2009 through a brand license agreement with Philips. MMD exclusively markets and sells Philips commercial displays and Philips monitors worldwide. By combining the Philips brand promise with TPV’s manufacturing expertise in displays, MMD uses a fast and focused approach to bringing innovative products to market. MMD operates internationally with its Global headquarters in Taiwan, North American headquarters in Fremont and its European headquarters in Amsterdam.

For more information MMD, visit www.mmd-p.com

APRIL 2016 ENGINEERING REVIEW

169

BUSINESS NEWS Âť PUMPS & VALVES

Mobile app brings Industry 4.0 to all pumps / ACHEMA 2015

To help plant operators increase productivity and transparency as well as improve competitiveness across the entire life cycle, Frankenthalbased pump manufacturer KSB has developed an app for smartphones and tablets that can determine the efficiency of fixed-speed pumps in just 20 seconds. The KSB Sonolyzer app is based on an algorithm that has been integrated in PumpMeter units for five years now, of which well over30,000 have already been sold. The smartphone-based application does not require knowledge of the individual characteristic curve or any additional technical data of the pump set to be measured, however, and can also be used with pumps from other manufacturers. Users can utilise the app to determine the

170

ENGINEERING REVIEW

APRIL 2016

load at which each centrifugal pump driven by a fixed-speed asynchronous motor is being operated. The following data must be entered for this purpose: the motor rating, the rated motor speed, the head and the flow rate of the pump. This information can be read from the name plate affixed to every pump. When the measurement routine starts, the microphone built into the smartphone or tablet is used for approximately 20 seconds to record the noise emitted by the fan of the electric motor. This noise spectrum is then filtered by the application to ascertain the exact speed of the pump set and determine the torque. By correlating the performance data entered by the user with the hydraulic systems database developed by the manufacturer,

the app can conclude whether the pump is operating at part load and lets the user know if any energy could be saved by optimising the hydraulic system or the drive. The KSB Sonolyzer app is available for the iOS and Android operating systems and can even be used in potentially explosive atmospheres if the smartphone or tablet PC has appropriate protection. The average life cycle of plants used in the chemical industry exceeds 30 years, which is why the pumps installed have only seldomly been connected directly with the Internet of Things. In many cases, users are not even aware of a pumpâ&#x20AC;&#x2122;s current load condition. This, in turn, points to a considerable amount of energysaving potential that can be tapped by optimising

existing pump installations. All analysis data that is uploaded to a secure, cloud-based environment does not reference an individual. The data serves statistical purposes and is only used to further develop and advance the analysis algorithms in the cloud application which is accessed by the app. Should a user be in need of support or assistance from the pump manufacturer, he or she must actively contact the company. Those interested in the app can download it to their device free of charge from June 15 via the App Store (Apple) and Google Play (Android).

For more information Web: www.ksb.com

www.engrreview.com

PUMPS & VALVES » BUSINESS NEWS

Economic long runner : The diaphragm valve type 604/605 The valve’s compact design fits standard installation lengths. Its integrated pneumatic actuator with quick opening and closing times enables more than one million closing cycles over its long service life. That is what GF Piping Systems calls a durable hard worker. The valve is flexible in its operating modes and offers fail safe to close (FC), fail safe to open (FO) and double acting (DA) options. The actuator housing can be opened quickly for service due to the central housing nut. The connection with the valve body is full plastic without any metal parts.Therefore all materials have the same temperature

expansion coefficients which prevents leakages and avoids re-torqueing of screws. Thanks to the optimized linear flow characteristics the kv value is up to 30 percent higher than with comparable valves. The valve is available in DN15 with the pressure rating of PN6. The small six-arms phenomena is living all over the world in equally cozy or harsh environments. Like the

GF Piping Systems diaphragm valves. The wide range of materials offers highest adaption and resistance to chemical fluids and environments. The valves are available in PVC-U, CPVC, PP-H and PVDF. Diaphragms in EPDM, FPM, PTFE/EPDM and PTFE/FPM enable the handling of aggressive media as well as neutral fluids. That makes them even more flexible and reliable for all your applications. Valve type 604 can be mounted into your system with true union connection matching all standard GF unions and inserts and solvent cementing. Type 605 has a spigot for welding resp. cementing.

The valves meet the standards ISO, BS, ASTM and JIS. As communication in an ant colony is very important they share all necessary information. The new diaphragm valve will communicate with you as well. A unique QR code on the product leads to installation manuals, online training videos and certifications. Open your application in water treatment, the chemical process or other industries for the diaphragm valve type 604/605 and you will be astonished what this small valve can handle. For more information Web: www.gfps.com

ValvTechnologies extends Bi‐directional sealing feature to 5/8” Bore Valves ValvTechnologies, Inc. ValvTechnologies Extends Bi‐directional Sealing Feature to 5/8” Bore Valves HOUSTON – ValvTechnologies, Inc., manufacturer of zero-leakage severe service isolation valve solutions, announced the extension of bi-directional sealing technology to its 5/8” bore V Series high-performance metal seated ball valves. ValvTechnologies’ 1” and larger V Series valves have always had bi-directional sealing ability: this superior capability has now been extended to 5/8” bore valves. Designed to provide 100% zero-leakage for customers in the fossil power and nuclear generation markets, this is the original fully bi-directional,

www.engrreview.com

zero-leakage metal seated ball valve on the market. The bi-directional design prevents the upstream load spring from collapsing in a reverse flow or backpressure condition. The design ensures the integrity of the seating of the high pressure end subsequent to any reverse flow condition, guaranteeing Class V shutoff in the reverse direction after an upset condition. Most metal seated ball valves are a uni-directional design specifically targeting globe

valves. ValvTechnologies’ V Series designs can be utilized in bi-directional applications where gate valves are used without the worry of internal damage typical of other metal seated ball valve designs. ValvTechnologies’ V Series 5/8” bi-directional valves can be used in severe service applications in fossil power and nuclear generation, as well as any industry where a combination of zero-leakage and bi-directional functionality is a benefit by improving the performance, reliability and the safety of a plant. “Adding bidirectional flow capabilities to the V series valves will have a great impact in the power industry, but nearly all industries can benefit from the

new design feature,” said Kevin Hunt, President and Founder of ValvTechnologies. “Customers will see a significant reduction in failures on a variety of valves including boiler feed recirculation valves, feedwater heater isolation bypass valves and feedwater isolation bypass block valves.” Customers benefit from ValvTechnologies’ bi-directional metal seated ball valves of every size by realizing increased security, less downtime and lower maintenance. During an upset condition, the process flow can be unpredictable and, in most cases, the performance of the equipment that experienced the upset is jeopardized. For more information Web: www.valv.com

APRIL 2016 ENGINEERING REVIEW

171

TECH TRENDS

» POWER

Profitable growth for the Lapp Group Higher turnover, more employees, more profit

Andreas Lapp, Chairman of Lapp Holding AG

he Stuttgart-based Lapp Group reported significant growth in turnover in the last financial year 2014/2015 (1 October to 30 September). After two years of low turnover development, turnover in the last financial year increased by 8.1 per cent to € 886 million. Profit before tax increased by 11.3 per cent to € 41.3 million. The number of employees rose to around 3,300. Andreas Lapp, Chairman of the Stuttgart-based Lapp Holding AG, said: “We have essentially achieved our objectives and further expanded our market position. Although the German engineering association VDMA had predicted zero growth for machinery and plant engineering - Lapp Group’s most important market - in 2015, we were successfully able to clearly set ourselves apart from the general trend. We are better than the industry average.” The Lapp Group has managed to clearly separate itself from the mixed development and deteriorating

172

ENGINEERING REVIEW

APRIL 2016

Andreas Hermann, Financial Director at Lapp Holding AG

Georg Stawowy, Chief Technical Officer at Lapp Holding AG

economic situation in important markets. Initiatives in the sales area, activities in the infrastructure segment, the system business and the consistent acquisition of new market segments particularly contributed to this. The increased turnover was also positively affected by the currency development outside of the Euro area. The annual average price of copper, important for the company, only increased marginally (from € 525/100 kg to € 527/100 kg).

Poland and Italy. America (USA, Canada, Central and South America) even managed to increase its turnover by 26.1 per cent to € 107.7 million (previous year € 85.4 million). As a result, its turnover share increased from 10.4 to 12.2 per cent. The high average exchange rate of the dollar and the initial consolidation of Cabos Lapp Brasil where Lapp has opened a new production plant had a considerable impact on this significant growth. Asia (with Africa, Australia and New Zealand) also achieved strong turnover growth of 17.4 per cent to € 188.9 million (previous year: € 160.9 million). The turnover share increased to 21.3 per cent. In addition to currency-related effects, Lapp Korea in particular was able to considerably increase its turnover.

Positive development in all regions Turnover development has been positive in all three Lapp Group regions. Europe is the most important market for the Lapp Group with a 66.5 per cent share in the total turnover. Turnover rose by 2.8% to € 589.6 million (previous year: € 573.7 million). The most important single market here is Germany with a turnover share of over 30 per cent. Turnover here was € 268.5 million (previous year: € 264.8 million). Turnover development was also positive in Benelux, Austria, Romania,

Healthy earnings and financial situation The earnings and financial situation at the Lapp Group is very healthy. The number

www.engrreview.com

POWER » of employees increased by 3.1 per cent to 3,300. Material costs (consisting of personnel costs, depreciation and other operating expenditures minus other operating proceeds) increased from € 285.9 to 305.5 million. At the same time, the company managed to increase profit before tax by 11.3 per cent to 41.3 million. The equity ratio improved slightly to 57 per cent. Financial Director Andreas Hermann: “The Lapp Group has asserted itself very well and is in a very healthy position. We have set a course for long-term stable growth.”

Investments for continued growth The Lapp Group invested € 20.4 million in the 2014/2015 financial year. The biggest projects included the continued roll-out of the new SAP software ECC 6.0 and addition to capacity in important plants. For example, the production plant in Bangalore, India was almost doubled by an extension. In the French plant in Forbach, a new wire drawing machine was commissioned. The new machine will enable them to double production of copper wires. This makes Lapp a technological leader. The construction of a new administration and logistics centre was started in Russia. The construction of the new Lapp Europe headquarters in Stuttgart-Vaihingen was started in spring 2015. The new construction provides new opportunities to bundle Lapp’s strengths even more effectively and to provide even better support for customers throughout Europe. The investment sum borne by Lapp Immobilien GmbH & Co. is

www.engrreview.com

approximately € 28 million.

Outstanding innovations & examples of application • The Lapp Group group presented the new ÖLFLEX® CONNECT SERVO at the last Hanover Fair. This is a new generation of servo products with which the connection solutions for electrical drives are improved, made more efficient and available worldwide. Lapp has revived its portfolio of ÖLFLEX® servo cables and developed a new generation of connection systems together with the global market leader Intercontec. The cables and connection systems are processed in an automated production process developed specifically for this purpose. The Lapp Group is now constructing special production facilities in Europe, North America and Asia where new solutions are produced in consistently high quality. • Lapp has developed a portfolio of tailored connection technology especially for the food industry. These include especially resistant cables and conduits, cable glands, connectors and accessories such as cable ties. The components meet strict international requirements, such as EHEDG design specifications or compatibility with ECOLAB® cleaning agents (see also special topic). • At the world exhibition in Milan, Expo Milano 2015, the German pavilion grabbed the visitors’ attention with its energy-generating solar trees. They

TECH TRENDS

integrated organic photovoltaics (OPV) technology and, unlike conventional solar modules, are made from flexible, film-integrated OPV modules. The revolutionary connection technology in this installation came from Lapp. The classic photovoltaic connection technology was especially in demand in the Asia-Pacific region. • An ambitious project to store current for renewable power has been started by VARTA Storage GmbH together with the Technical University of Munich in Moosham, Upper Bavaria. Since October 2015, this has been home to a battery storage system boasting 200 kilowatt hours. ÖLFLEX® cables from Lapp help protect against short circuits. • The Russian company Technomarin, based in St Petersburg and specialised in the development and production of radio navigation equipment for the maritime and aviation sector, uses Lapp products for cabling its beacons and navigation systems in the Arctic. Cables from the ÖLFLEX® HEAT series that still function reliably at cold temperatures down minus 100 degrees Celsius were used for these extreme locations.

People are the most important resource “It is our dedicated employees that make Lapp a successful company”, says Andreas Lapp. For this reason, a human resource development concept has been developed for all Lapp Group companies. Employees can obtain further qualification in various programmes. The aim is to further increase the number of managers from within the company. Currently, 60 trainees at Lapp in Germany are learning a trade in eleven skilled trades and study courses at the cooperative university. They include for the first time a refugee from Eritrea. As a result of positive experiences, Lapp will facilitate training as a machinery and plant operator for nine recognised refugees within three years. The refugees obtain a 6-12 month IHK (Chamber of Industry and Commerce) entry qualification before the training starts. Thanks to its familyconcious business culture, three years

APRIL 2016 ENGINEERING REVIEW

173

TECH TRENDS

» POWER

The SKINTOP® HYGIENIC has no corners or edges and is easy to clean

The new generation of ÖLFLEX® servo products processed in an automated production process designed specifically for this purpose

ago the U.I. Lapp GmbH was awarded the “berufundfamilie” (work&family) certificate which is awarded under the patronage of the German Federal Ministry for Family Affairs. This certificate is currently being renewed and the U.I. Lapp GmbH is in the final round of awardwinning companies again in 2016.

Positive outlook for the current financial year The Lapp Group has had a good start. The company also expects moderate turnover growth in this financial year. Andreas Lapp: “We are expecting important impulses from Asia and America in particular, as well as from Central Europe. However, volatility in currency exchange rates and

The modular battery storage system ‘Energy Neighbor’ from Varta Storage and the Technical University of Munich is intended to help generate power from wind and solar units

174

ENGINEERING REVIEW

APRIL 2016

the price of copper could affect growth.”

About the Lapp Group: Headquartered in Stuttgart, Germany, the Lapp Group is a leading supplier of integrated solutions and branded products in the field of cable and connection technology. The Group’s portfolio includes standard and highly flexible cables, industrial connectors and screw technology, customized system solutions, automation technology and robotics solutions for the intelligent factory of the

The energy-generating solar trees at the Expo with Lapp connection technology

Cables from the ÖLFLEX® HEAT series were used in the Arctic. Not only do these cables cope well with heat, they are real all-rounders when it comes to extreme temperature ranges. future, as well as technical accessories. The Lapp Group’s core market is in the industrial machinery and plant engineering sector. Other key markets are in the food industry as well as the energy and the mobility sector. The Lapp Group has remained in continuous family ownership since it was founded in 1959. In the 2014/15 business year, it generated consolidated revenue of 886 million euros. Lapp currently employs approximately 3,300 people across the world, has 17 production sites and 39 sales companies. It also works in cooperation with around 100 foreign representatives.

For more information www.lappindia.lappgroup.com

www.engrreview.com

INDUSTRIAL PRODUCTS LISTING OF THE MONTH Â» PRODUCTS INDEX A

CNC Vertical Machining Center

AC Current Isolated Sensor

INSIDE BACK COVER

Coating

AC Lenear Servo Motor

107

Colour Sensors

AC Servo Systems

107

Communication Cable

F Fans & Appliances

Fasteners

Fire & Alarm Detection Solutions

Access & Entrance Control Solutions

Composite Coble

Fire Alarm Cables

Actuator Line

Compressed Air Pipeline Network System

Fire Rolling Doors

Air Dump / Release

Compressed Air Piping

Fire Survival Cables

Air Particle Counter

Compression Fittings

135

Flashback Arrestor

135

Angle Pattern Needle Valve

135

Arc Flash Protective Clothing Articulated Robots

Conductors

Conduits

93 16-17

Flexible Cables

Flexible Couplings

107

Forged Rounds

131

Consumables

135

Control Cable

Automatic Circuit Breaker Testers

Control Gears

Automatic Conveyors Accessories

Controllers

Gas Filling & Transfer Device

Automation Products

Counters

Gas Management

Automobile Cable

CT with Analog Output Transducers

Gas Metal Arc Welding Machine

109

Automotive Meters

115

Gas Regulators

135

Gas Saver & Safety Switch

135

Gas Springs

129

Auto Changeover Systems

Currency Handling Equipment Cutting Tools

151, 153

Cylinder Home Position Control

135 29

Backfill Compound

139

Cylinder Manifold Systems

135

Gas Stop Valve

135

Ball Bearing Units

133

Cylinder Manifold with Delivery Staions

135

Gas Tungsten Arc Welding Machine

109

Ball Screws

INSIDE FRONT COVER

Gaskets

Ball Transfer Units

107

Battery Capacity Testers

115

Data Signal Cables

Gauge Comparator

135

Gear Oil

111

Building Wire

DC/AC Geared Motor

107

Gears

107

Burglary and Fire Resistant Safes

Dead Weight Pressure Tester

135

Greases

111

Deceleration Products

129

Grinding Machines

Deep Groove Ball Bearings

Cable Glands

16-17, 91 & BACK PAGE

Cable Jointing Kits Cable Protection Cables

93 BACK PAGE 16-17, 93

Cam Driven Systems

Die Lifters

Drive Systems

Capacitors

Earth Pit Earthing Electrodes

H Hand Chain Hoist

Hand-Held Oscilloscope

Harmonic Filter

103

Heat Exchangers

Hi Flex Battery Cable

113

Drag Servo & Variable Flexible Data Cable

CAM Software

131

Digital Panel Meters & Transducers

INSIDE FRONT COVER

Carbon Steel Flanges

133

Digital Impulse Reflectometer

Cam Followers

INSIDE FRONT COVER

139 77, 139

High Performance Water Soluble

111

High Pressure Hoses

135

High Voltage Insulating Matt

121

Ceramic Cappilaries

Earthing Rods

139

Ceramic Insulators

EDM Filter

131

Ceramic Pyrometry Tubes

EDM Oils

111

HMC Machine

Ceramic Solid Rods

EDM Wire & Resins

131

HMI

Circular Connectors

BACK PAGE

EFD Solutions

129

HMI Solutions

35 21

Clamp Meters Clamps for Linear Guids Cleaning & Painting System

23 107 5

EHV Installations

High-precision Digital Ultrasonic Thickness Gauge 151, 153 INSIDE BACK COVER 9

INSIDE FRONT COVER

HMIs

Electric Chain Hoist

Hoses

Electric Motors

Hot Forging Lubricants

111

CNC Customized Cutting Machine

Electrical CAD Software

Hydraulic Oil

111

CNC Flame Cutting Machine

Elevator Cable

Hydraulic Pipes

131

Hydraulic Press

119

127

CNC Lathe

INSIDE BACK COVER

Encoders

CNC Machine

INSIDE BACK COVER

Energy Absorption & Vibration Isolation Products

CNC Machining Center

INSIDE BACK COVER

Energy Cables

INSIDE FRONT COVER

Energy Chains

Industrial Computers

INSIDE FRONT COVER

Industrial Connectors

135

Industrial Enclosures

BACK PAGE

CNC Machining Centers CNC Milling Machine CNC Plasma Cutting Machine CNC Turning Center

www.engrreview.com

INSIDE BACK COVER 69 INSIDE BACK COVER

EPC Services Evacuation & Gas Filling Unit Explosion Proof

I 35

Industrial Fastners

APRIL 2016 ENGINEERING REVIEW

131

175

PRODUCTS INDEX » INDUSTRIAL PRODUCTS LISTING OF THE MONTH Industrial Forgings

131

Industrial Network

Industrial Plugs

104-105

Industrial Shock Absorbers Indutrial Sockets

Non-Destructive Testers

151, 153

129

Oil Free Piston Compressors

Small Batch Manufacturing

Oil Free Screw Compressors

Smart Probes

Soft Start Lockout-Tagout

Software Solutions

Instrumentation Fittings

Orbital Machine

Instrumentation Fittings & Valves

Oxy-Fuel CNC Cutting Machines

Instrumentation Valves

Insulation Tester

Insulation Testers

Perimeter Intrusion Detection Systems

L Lighting Systems

Lightning Arrestor

139 107 & INSIDE FRONT COVER INSIDE FRONT COVER 87

Linear Motion Guides

107

109 73

Spherical Plain Bearings

INSIDE FRONT COVER 137

133

SS Plates

137

Pinions

107

Stainless Steel Flanges

131

Pipe Fittings

131

Static Elimination Solutions

Plasma CNC Cutting Machines

Plasma Cutting Machine

109

Stepper & BLDC Motor

107

Storage Rack

133

PLCs

Submerged Arc Welding Machine

109

Polymer Bearings

Submersible Cable

Portable Cable Fault Location System

Surface Grinders

Lining

Power Transducers

Load-Holding Valves

Power Equipments

INSIDE FRONT COVER

Lockable Gas Springs

129 141

INSIDE FRONT COVER

Pillow Blocks

Portable Digital METAL Hardness Tester

Logout Tagout Products

Solar Energy Solutions SS Pipes

Solar Application Cable

Linear Slides

Logistics Services

INSIDE FRONT COVER

104-105

Oil Tester

Linear Line

Slewing Ring Bearings

Linear Guides

109

Signal Transmetters

Instrumentation Cable

Linear Actuators

Shielded Metal Arc Welding Machine

Precision Air Moving Products Precision Ball Screws Precision Measuring Instruments

151, 153

29 107 151, 153

Switches

10 FALSE COVER FRONT GATEFOLD

Switchgears

27, 93

T T & D Transformer Tank

T & D Transformer Tank - Robotic Welding

117

Low-Frequency Generator

Precision Turned Parts

Telescopic Line

Lubricated Piston Compressors

Pressure Control Solutions

Tension Springs

129

Lubricated Screw Compressors

Project Engineering Solutions

M Machine Automation Controller

Machining Centers

Timers

Titration System

Towers

TRMS Multimeter

Proximity Sensor

Proximity Sensors PU Coated Gloves

FALSE COVER

Maintenance Aerosols

111

Marquees

Racks

Material Handling Equipments

Rapid Manufacturing

Metal & Component Cleaners

111

Ratchet Lever Hoist

Metal Working Fluids

111

Record Protecting Equipment

Vaccum Pumps

107

Uniniyvin Cables

135

Microprosessor Digital Programmable Panel Meters 99

Regenerative Converter

Mild Steel Flanges

131

Remote I/O / Converters

Milling Machines

Retail Energy Solutions

INSIDE FRONT COVER

VFD

Modbus, Profibus, Foundation Field Bus

Rod Ends

INSIDE FRONT COVER

Vision Sensors

Modular Switches

Rodless Cylinders

129

VMC Machine

INSIDE BACK COVER

Roller Blocks

133

Roller Top Hydraulic Trolley

133

Monitoring & Surveillance Solutions Motors

FRONT GATEFOLD

Moulding Multi-Axis Motion Controller

Valves

Vault Equipment

11 9

Rotary Encoders

Warehousing Equipments

107

Rubber Products

Wave Springs

101

Multicore Cable

Rust Cleaners

111

Welding Automation

109

Multifunction Harmonics Analyzer

Rust Converters

111

Welding Cable

Multifunction Power Analyzer

Welding Equipments

Wire Rope Hoist

Wires

S N

Safety Light Curtain

Neat Cutting Oil

111

Safety Valve

Needle Valve

135

Scanning and Screening Solutions

Non Return Valve

135

Servo Motor

176

ENGINEERING REVIEW

APRIL 2016

9 135 11 9

3 Way Ball Valve

135

3D Rapid Prototyping

www.engrreview.com

AD INDEX COMPANY NAME

PG. NO.

COMPANY NAME

PG. NO.

A.C. AUTOMATION

129

DIEMOULD INDIA - 2016

AAA INDUSTRIES

DMG MORI

ACMEE - 2016

DOWEL ENGINEERING WORKS

119

ADITRON INDIA PVT. LTD.

133

ADOR WELDING LIMITED

AMTEX - 2016

132

APEX PRECISION MECHATRONIX PVT. LTD.

107

AUTOMATION INDIA WELDING TECHNOLOGY (P) LTD.

117

www.engrreview.com

25, 27

HRS PROCESS SYSTEMS LTD.

BACK PAGE

ERWIN JUNKER MASCHINENFABRIK GMBH

FLIR SYSTEMS INDIA PVT. LTD.

COSMOS IMPEX (INDIA) PVT. LTD.

HAVELLS INDIA LTD.

EPCOS INDIA PVT. LTD.

COLUMBUS McKINNON CORPORATION

HARTING (INDIA) PVT. LTD.

HUMMEL CONNECTOR SYSTEMS PVT. LTD.

BOGE INDIA

136

EXOR INDIA PRIVATE LIMITED

CNC SOFTWARE, INC.

HANNA EQUIPMENTS (INDIA) PVT. LTD.

ENGIMACH - 2017

139

FALSE COVER

BHARTI ENTERPRISE

CNC SERVICING & SOLUTIONS (I) PVT. LTD.

EFFICA AUTOMATION

GODREJ & BOYCE MANUFACTURING COMPANY LIMITED

144

BETTINELLI AUTOMATION COMPONENTS PVT. LTD.

CEM INSTRUMENTS (INDIA) PVT. LTD.

PG. NO.

E4 EVENTS

E-SQUARE ALLIANCE PVT. LTD.

COMPANY NAME

FLUKE TECHNOLOGIES PVT. LTD.

IGUS (INDIA) PVT. LTD.

IMAGINARIUM (INDIA) PVT. LTD

INDIA CHEM - 2016

134

INDIA MACHINE TOOLS SHOW - 2017

145

INDIA TOOLS & INSTRUMENTS CO.

151, 153

INNOVISTA SENSORS

FRONT GATEFOLD

INORBIT TOURS PVT. LTD.

125

INSTAMOD AIRPIPE PVT. LTD.

141

G GALAXY EARTHING ELECTRODES (P) LTD.

GEISSEL INDIA PVT. LTD. GLOBAL INDUSTRIAL EXPO - 2016

142

JAY STEEL CORPORATION

137

JIG ENGINEERING

131

APRIL 2016 ENGINEERING REVIEW

177

AD INDEX COMPANY NAME

PG. NO.

COMPANY NAME

PG. NO.

JYOTI CERAMIC INDUSTRIES PVT. LTD.

MTEKPRO TECHNOLOGIES PVT. LTD.

43, 45

JYOTI CNC AUTOMATION LTD.

INSIDE BACK COVER

KNOWELL INTERNATIONAL PVT. LTD. KOYO ELECTRONICS INDIA PVT. LTD.

RR KABEL LIMITED

SAFEXPRESS PVT. LTD.

SEE LUBE TECHNOLOGIES PVT. LTD.

111

SHAVO TECHNOLOGIES PVT. LTD.

SHREE NM ELECTRICALS LTD.

SMALLEY STEEL RING COMPANY

101

SWASTIK ROLLING SHUTTERS & MFG. WORKS

103

133

NORDSON INDIA PVT LTD

129

NRB INDUSTRIAL BEARINGS LIMITED

INSIDE FRONT COVER

KUEBLER AUTOMATION INDIA PVT. LTD.

PG. NO.

NORD DRIVESYSTEMS Pvt.Ltd.

COMPANY NAME

71 OMRON AUTOMATION PVT. LTD.

KUSAM ELECTRICAL INDUSTRIES LTD.

97, 99

P L PAARTH VALVES PVT. LTD.

135

PANAM ENGINEERS LTD.

LAKSHMI RING TRAVELLERS (COIMBATORE) LTD.

LAPP INDIA PVT. LTD.

16-17

PC|SCHEMATIC

LEGRIS INDIA PRIVATE LIMITED

POWERELEC INDIA - 2016

TEJ INDUSTRIES

131

127

TESTO INDIA PVT. LTD.

143

MAINI MATERIALS MOVEMENT PVT. LTD.

RAJKOT MACHINE TOOLS SHOW - 2016

146

MARVEL GLOVES INDUSTRIES

RAVIN INFRAPROJECT PVT. LTD.

INSIDE FRONT COVER

MECO INSTRUMENTS PRIVATE LTD.

113

RISHABH INSTRUMENTS PVT. LTD.

115

RMG POLYVINYL INDIA LTD.

121

WARPP ENGINEERS PVT. LTD.

109

WELDINDIA CONSULTANCY PRIVATE LIMITED

WIN INDIA - 2016

WIRE & CABLE INDIA - 2016

138

Y MECO METERS PRIVATE LTD.

YASKAWA INDIA PVT. LTD.

178

MENNEKES ELECTRIC INDIA PVT. LTD.

104-105

ROLLON INDIA PVT. LTD. - INDIA

MOTOR & MAGNETIC EXPO - 2016

123

ROSS CONTROLS INDIA PVT. LTD.

ENGINEERING REVIEW

APRIL 2016

Z ZENITH INDUSTRIAL PRODUCTS

131