Volume 9 No. 7
JULY 2014 ` 150
RNI NO. MAHENG/2007/20212
INDUSTRIAL www.ind-safety.com
9
REVIEW
INDIA’S LEADING MONTHLY MAGAZINE ON FIRE, SAFETY & SECURITY INDUSTRY
Embracing
visibility with technology
Mr. Lalit Aggarwal - Managing Director (left) & Mr. Rakshit Damani - Partner (right) Reflectosafe Page no. 64-65
innovation
RNI NO. MAHENG/2007/20212
JULY 2014 ` 150
Volume 9 No. 7
INDUSTRIAL www.ind-safety.com
REVIEW
ISR_FX3500_Ad_July2014 14-07-14 9:37 AM Page 1
INDIA’S LEADING MONTHLY MAGAZINE ON FIRE, SAFETY & SECURITY INDUSTRY
AV AIL
AB
LE
NO
W!
FX-3500 SERIES Intelligent Fire Alarm & Suppression Systems
Saving Lives and Protecting Property NEW from Mircom, the FX-3500 Series includes powerful and intelligent fire alarm systems which are listed for fire control and releasing service. Supporting both Advanced Protocol as well as Classic Loop Interface Protocol devices, the FX-3500 Series provides quicker response, superior system capacity and flexible programming options. Thanks to the new faster AP digital protocol, the FX-3500 Series provides up to three addressable Signal Line Circuits and connects up to 954 addressable devices or points. Recommended for both new and retrofit fire detection and special-hazard applications, the FX-3500 Series stands ready to save lives and protect property. Call or visit us online to learn more about the FX-3500 Series. Shown with 2 optional RAX-1048TZDS modules
www.mircom.com/fx-3500 India Head Office: Mircom Fire & Communications India Pvt. Ltd., No.7, BDA Road, Avani Sringeri Nagar, BTM 6th Stage, Bangalore - 560076. Tel: +91 80 26480236/37 International Head Office: Mircom Group of Companies, 25 Interchange Way, Toronto ON, L4K 5W3 Canada
Intelligent Fire Detect
The Most Versatile and Powerful Systems in the Industry MMX™ is a ‘next generation’ modular network system that is designed for the most demanding fire protection and emergency communications applications. MMX™ has an impressive new range of system configurations, including a wide array of cabinets and sizes for control and annunciation requirements.
APPROVED
www.secutron.com/MMX
Contact us to learn how we can assist your team with your next project!
India Office: Mircom Fire & Communications India Pvt. Ltd. | No.7, BDA Road, Avani Sringeri Nagar, BTM 6th Stage, Bangalore - 560076. T
tion and Mass Notification Systems
In addition to the widest selection of LED and LCD annunciators, MMX is also supported by Open Graphic Navigator, an advanced 3D graphic software system that takes system monitoring and emergency response to a whole new level. Enhanced Life and Property Protection Secure System Configuration / Maintenance Advanced Monitoring and Control Fully Customized Graphics Intuitive User Interface
Tel: +91 80 26480236/37. International Office: Mircom Group of Companies | 25 Interchange Way, Vaughan Ontario, L4K 5W3 Canada
E
www.mircomgroup.com
COVER STORY
Contents
Monthly Magazine On Fire Safety & Electronic Security
Managing Editors Shilpa Kadam Shirish Dongre CEO Shekhar Dongre
Embracing visibility with technology innovation Mr. Rakshit Damani - Partner & Mr. Lalit Aggarwal - Managing Director, Reflectosafe
64-65
IN FOCUS
BUSINESS NEWS e –surveillance: The cost benefits & ROI for banking sector Mr. Sunil Rao, Head - SaaS enterprise, Zicom
58
“Today Matrix is positioned as a qualitative & competitive product manufacturer on the global planet”
60
Mr. Ruchir Talati, Product Manager- Telecom, Matrix Comsec,Vadodara
“There is immense growth in the industry as with growing technology”
66
Mr. Firoze Zia Hussain, CEO, Totem International Pvt. Ltd., Hyderabad
TECH UPDATE SAFETY INDUSTRY 68 India’s Industrial Safety Case FIRE INDUSTRY 76 Wireless Gas Detection with Crowcon’s Detective Net SECURITY INDUSTRY 86 Guard Tour Systems 90 Thermal imaging helps Kalmthout fire department during wildlife fires and other interventions 92 Truly innovative shapes & uncompromising safety 94 Solus canteen management solutions 96 Hikvision megapixel cameras secure 2014 FIFA world cup Brazil 97 Choose right camera to save bandwidth & NVR storage
SAFETY INDUSTRY 04 Dräger expands the X-zone system 06 British Safety Council’s annual conference 2014: “Pushing health up the workplace agenda” FIRE INDUSTRY 08 Gunnebo launches new fire-fighting solutions brand – GILPRO 12 Pelican introduces the new pelican.com 14 Lighter, brighter, longer-lived: New generation of robust fluorescent lights for hazardous areas SECURITY INDUSTRY 16 Aditya Infotech rolls out Star First Partner program 26 Gallagher’s personal identity verification solution achieves approval from U.S. Government 28 Hikvision remains in pole position in global CCTV and Video Surveillance market 32 Godrej Security Solutions awarded the prestigious TOCICO International Achievement Award 34 Matrix Comsec awarded as the best electronics company by GESIA 36 Toshiba & Rashi concludes a 4 city training program for surveillance partners 38 HID Global’s trusted tag services delivers home health “Proof of Presence” to comply with Medicaid EVV mandates 42 Genetec and Vidcie partner to provide mobile video surveillance capabilities to law enforcement and security professionals 44 VIVOTEK, along-with Bajaj Electricals Ltd, fulfills diversified market demands in India 46 Rosslare launches revolutionary open to secure™ (O2S) readers 48 Budget 2014: Boosting demand for Electronic Security Products
PROJECT UPDATE ..................77
FOR ADVERTISING ENQUIRY CONTACT : E-mail: shekhar@divyamediaonline.com
www.ind-safety.com
Editor Rajeev lyer Advisory Board (Editorial) Mr. D.C. Nath - IPS (Retd.) Ex.President & CEO - IISSM Farooq Abdullah Managing Partner - Marvel Gloves Industries Dr. Saifuddin Bharmal C.M.D. - Lookman Electroplast Industries Ltd. Mr. R. R. Nair Chief Executive of Safety & Health Information Bureau (SHIB) Mr. T. P. Singh Director-S&M, FLIR Systems India Pvt Limited Mr. Arul Prakash Vice President, Business Area – Fire Products, Gunnebo Security Solutions Marketing Team : Ladoji Pendurkar, Bhavin Shah, Bharat Shah Vinod Surve, Kavita Chaudhari, Design & Layout Arun Shinde, Pradeep Pillalamarri, Nandan Moghe, Dinesh Gawade
Head Office : Divya Media Publications Pvt.Ltd. 303/304,3rd Floor, Harmony Tower, Netaji Subhash Road, Court Naka, Thane (W) Thane-400 602 Maharashtra Tel: +91 22-25380574/75 Telefax: +91-22-25418254 E-mail: shekhar@divyamediaonline.com Website: www.ind-safety.com Branch Offices (Zonal): NORTH (Delhi & NCR regions) : Sandesh Jain : 09810837877 SOUTH (Chennai & Coimbatore) Y. V. Raghu : 09566141224 Bangalore - Vaman : 09686721340 Hyderabad - R Tiwari : 09985381878 Kochi - Sanjeev Nair : 09846249568 EAST (Kolkata & Other regions) S. Roy - 09433097806 WEST (Maharashtra & Gujarat) Pune - S.Kadam - 09833373371 Gujarat - Dinesh Shah 09327344559 Rajkot (Saurashtra) Swapnil Bhatia: 09227909005
INDUSTRIAL SAFETY REVIEW Overseas Offices USA : Nancy TARTAGLIONE, Mepax USA n.tartaglione@mepax.com / usa@mepax.com
GERMANY: Sebastian OLLIER Mepax Deutschland, Tel: +49 711 222 54 456, deutschland@mepax.com
FRANCE: MEPAX SA, Romain CLASS Tel.: +33 1 39 02 77 78, FRANCE ITALY: Valeria VILLANI Tel.: +39 339 8610117, Via Firenze, Milano, Italia
SPAIN: Sofiane JEDIDI Mepax España Tel : +34 963 255 886, spain@mepax.com UK: Liz Jones Tel: +44 (0)1227 276016 , l.jones@mepax.com
RUSSIA: Garri ZALTS Mepax Russia Tel: +7 495 576-7666 / gizalec@yandex.ru
CHINA/South Korea/Taiwan: Mepax - Konaxis Shanghai Julien PENARD Tel : (+86) 21 6252 2731/ china@mepax.com
All rights reserved. No part of this magazine may be reproduced in any form without the permission of the Editor. INDUSTRIAL SAFETY REVIEW is owned, printed & published by Shilpa Kadam, published from 3rd Floor, Harmony Tower, Netaji Subhash Road, Court Naka, Thane (W) Thane-400 602 Tel: +91 22-25380574/75 Telefax: +91-22-25418254, Editor : Rajeev lyer. Important : Whilst care is taken prior to acceptance of advertising copy, it is not possible to verify its contents. INDUSTRIAL SAFETY REVIEW can not be held responsible for such contents, nor if any losses or damages incurred as a result of transactions with companies, association or individuals advertising in the publications. Articles, interviews published in INDUSTRIAL SAFETY REVIEW are the personal vie-ws and expressions of its authors. INDUSTRIAL SAFETY REVIEW does not necessarily agree to it. INDUSTRIAL SAFETY REVIEW can not be held res-ponsible for such articles / interviews. We therefore recommend that readers make necessary enquiries before sending any money or entering into any agreements with advertisers or otherwise act-ing on an advertisement in any matter whatsoever.
INDUSTRIAL SAFETY REVIEW
2
JULY 2014
SAFETY INDUSTRY
BUSINESS NEWS
Dräger expands the X-zone system New opportunities in mobile area monitoring
L
übeck – With the new model X-zone 5500 and
the GSM module X-zone Com, Dräger is expanding the opportunities for mobile area monitoring. The system can now send measuring data and warning notices by email, by text message or to the cloud. Like the original X-zone 5000, you can connect up to 25 X-zone 5500s in an alarm chain. The triggering device transfers the alarm to all other devices in the chain. One X-zone Com is now enough to forward the data from up to 15 devices directly to the safety officer. No precious time will be lost in an emergency.
More information, more safety Via Bluetooth, the data of the grouped X-zone can also be displayed on a laptop. The integrated GPS module transmits the position of the X-zone Com and thus also the position of the hazard location. A data logger continually stores the measurements. No data will be lost and all important measures can be implemented quicker, more efficiently and safer. The X-zone 5500 and X-zone Com are manufactured by Dräger Safety AG & Co. KGaA, Lübeck.
Dräger. Technology for Life® Dräger is an international leader in the fields of medical and safety technology. Our products protect, support and save lives. Founded in 1889, in 2013 Dräger generated revenues of around EUR 2.37 billion. The Dräger Group is currently present in more than 190 countries and has about 13,500 employees worldwide.
For more information Web: www.draeger.com
4|
JULY 2014 | INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
SAFETY INDUSTRY
BUSINESS NEWS
British Safety Council’s annual conference 2014: “Pushing health up the workplace agenda” On 15 October 2014 the British Safety Council will be hosting its annual conference at the America Square Conference Centre, London EC3N 2LB. This year we are focusing on occupational health. Absence from work owing to work-related ill-health far outweighs absence due to injury at work and as an issue overall occupational health is generally perceived as being more difficult to manage than safety.
T
he conference, which will be opened by our Chair of Trustees Lynda Armstrong OBE, will include keynote presentations from Lawrence Waterman OBE, Director of Health and Safety at Battersea Power Station, Trustee of the British Safety Council and Past President of IOSH; and Dr Lesley Rushton OBE, Reader in Occupational Epidemiology, Imperial College, London, one of the leading experts on work-related disease. There will also be presentations by Steve Perkins, Chief Executive, BOHS - The Chartered Society for Worker Health Protection and the Health and Safety Executive. These will be followed by a number of panel discussions on key issues in relation to occupational health and the experience gained from rolling out health and well-being programmes in workplaces. Neal Stone, Policy and Communications Director at the British Safety Council, said: “There have been significant improvements in the 40 years since the enactment of the Health and Safety at Work Act in 1974 in the reduction of fatal and major injuries at work. This achievement is a tribute to all of those involved in ensuring that the
6|
JULY 2014 | INDUSTRIAL SAFETY REVIEW
risk of workplace injury is effectively controlled. “However, occupational health has not had the same degree of attention and has not consequently experienced a similar improvement. With 1.8 million people suffering from ill health caused or made worse by work every year, according to the latest statistics from the Health and Safety Executive, this is without doubt a key risk that business needs to be focusing on. “Our conference will provide an opportunity for our members and others to hear from a range of experts in the field of occupational health and those who have contributed to putting successful programmes and initiatives in place including our member organisations. The conference will address a wide range of issues concerning occupational health from exposure to harmful substances and work environments
to issues around mental health, rehabilitation, stress management and the health challenges of managing an ageing workforce.” In addition to the confirmed speakers there are a number of confirmed panellists from business and experts in occupational health taking part that include Sodexo, Mount Anvil, The Work Foundation, OECD, Health and Safety Laboratory, Loughborough University, Mind, Macmillan Cancer Support and the Royal College of Arts (RCA) as well as others.
For more information, Web: www.britsafe.org
www.ind-safety.com
FIRE INDUSTRY
BUSINESS NEWS
Gunnebo launches new
fire-fighting solutions brand – GILPRO Newrange of fire-fighting products designed for superior performance
T
o address the safety needs of India’s booming infrastructure industry, Gunnebo, a world leader in security solutions, has announced the launch of itsnew brand, GILPRO, under its Fire Fighting Solutions vertical. Under the new brand, the company will offera range of fire extinguishers, hoses and couplings, sprinkler hoses (UL & FM approved), Kitchen Hood protection system and automatic fire suppression system. Designed to cater to the commercial and retail segments, including malls, hospitals, hotels, educational institutes complex, supermarkets and gas stations, the range of fire extinguishers under GILPRO is made under quality norms allowing it to perform underall conditions. Highlighting the need for resistant fire-fighting solution, Sandeep Deshpande, Managing Director, Gunnebo India, said, “With the rapid growth of infrastructure in smaller markets, it has become criticalfor the physical structures to be equipped with high-standard safety and security solutions.Our team has been relentlessly working to fulfil customer’s demand for Reliable and Value for Money products..” “Rapid growth and expansion in Tier II and Tier III cities has led to development of several commercial and retail establishments, and subsequently a higher risk of firerelated accidents. It is of utmost importance that all establishments
8 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
equip their premises with the right firefighting equipment,which adhere to best in class international safety standards. Keeping ‘innovation’ and ‘safety’ at the core of our offerings, our new brand GILPRO offers specialized and cost-effective fire solutions that cater tospecific needs of commercial customers,” added Arul Prakash, Vice President, Fire Products, Gunnebo India. In an industry which is plagued by inconsistency in quality, Gunnebo India adopts a no compromise approach to ensure, each and every product offered by it is qualified to meet the stringent specifications as mentioned in the standards. Backed by a rich global legacy, and seen as trusted brand name, quality remains central to all new innovations and launches at Gunnebo, with checks at various stages of manufacturing.
About Gunnebo India: Gunnebo India, a subsidiary of the Swedish-based Gunnebo Security Group, is a comprehensive provider of security & safety products and solutions. With a global brand legacy spanning over 240 years and 80 years of experience in the Indian market, Gunnebo brings unrivalled expertise in delivering security solutions for the Indian industry. Gunnebo India envisions to provide a safer future by catering to the growing demand in the Indian market with a comprehensive range of innovative
and efficient security solutions & services, both simple security needs and enterprise-wide security requirements. In India, Gunnebo offers solutions across five key business verticals: Bank Security & Secure Storage, System Integration, Global Services, Entrance Control and Fire Products. Today India is not only Gunnebo’ s second largest growth market, but also boasts of the company’s second largest employee base and largest manufacturing unit at Halol, Gujarat. The Halol manufacturing facility will house the Group’s global R&D center to develop and innovate new products and solutions and enhance the existing solutions. The company caters to a wide range of customers across sectors including banks such as the Reserve Bank of India, State bank of India, almost all nationalized and private/ public sector banks, Multinational, Co-operative & Rural banks, has partnered with key infrastructure projects such as security deployments in the phase 1 and 2 of Delhi Metro; Government & Defense sectors; manufacturing units such as Reliance Industries, Tata Group, Nokia, and Essar Steels etc, IT & BPO Sector like ANZ, Fidelity and Yahoo etc and much more. For more information, Web: www.gunnebo.com
www.ind-safety.com
Bank Security
Entrance Security
Fire Fighting Solutions
Security Services
System Integration
Gunnebo securing India's future World leaders in providing security solutions Innovative, global and world class security offerings Securing India since 1932 Committed towards creating a ‘Safer world and a Safer future’ Gunnebo India Pvt. Ltd. For more information call 1800 22 3525, 1800 209 2040 (Toll Free), 022 6780 3600 or email us at customercare.india@gunnebo.com
INDUSTRIAL SAFETY REVIEW
9
INDUSTRIAL SAFETY REVIEW AD, Size: 21cm x 28 cm JULY 2014
Successful combination:
detect gases
where you expect them
Dräger X-zone® 5000: reacts to up to six gases. State-of-the-art area monitoring – the Dräger X-zone 5000, in combination with the Dräger X-am 5000 or X-am 5600 gas detection instruments, can be used for the measurement of up to six gases. This easily transportable, robust and waterproof unit extends mobile gas detection technology to a unique system with many applications.
1978-2010
FOR MORE INFORMATION, VISIT WWW.DRAEGER.COM
FIRE INDUSTRY
BUSINESS NEWS
Pelican introduces the new pelican.com Website Launched With Sleek Interface
P
elican Products, Inc., the global leader in the design and manufacture of high-performance protective case solutions and advanced portable lighting, has introduced the newly revamped www.pelican.com. “This site boasts dynamic imagery, cutting edge design and user friendly simplicity in order to showcase our new and diverse products across the company’s many horizontal markets,” said Joe Baltronis, Pelican’s Senior Vice President of Worldwide Marketing. “We are confident that this new venue will be a go-to resource for new and existing customers to review our newest offerings and find what they need quickly.” The redefined Pelican.com showcases new imagery to give their products and services a new look and boasts enhanced features, which
include: • A streamlined look and organization, which allows for quick “two-click” navigation so users easily find what they’re looking for. • Responsive site design that adjusts dynamically for any computer or portable electronic device. Users can now visit the new site on a smart phone, tablet or desktop computer and images and text will automatically resize; no need to pinch or zoom. • Interactive product pages that feature all available product images and videos. Pelican Products, Inc. is a portfolio company of Behrman Capital, a private equity investment firm based in New York and San Francisco.
About Pelican Products, Inc. Pelican Products, Inc. is the global leader in design and manufacture of both high-performance protective case solutions and advanced portable lighting systems. Their products are used by professionals in the most demanding markets including fire safety, law enforcement, defense / military, aerospace, entertainment, industrial and consumer. Pelican products are designed and built to last a lifetime. The company operates in 19 countries, with 28 offices and seven manufacturing facilities across the globe. For more information, Web: www.Pelican.com
12 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
FIRE INDUSTRY
BUSINESS NEWS
Lighter, brighter, longer-lived: New generation of robust fluorescent lights for hazardous areas
R
. STAHL’s new line of light fittings for use in Ex zone 1/21 and 2/22 hazardous areas achieves better energy efficiency than comparable devices and provide approximately 10% more luminous flux. New EXLUX 6001 luminaires also feature a design that is considerably more compact, stable, and torsionresistant than their EXLUX 6000 predecessors. While more than one million of the long-proven EXLUX 6000 lights have been deployed worldwide over the last twenty-odd years, the new generation now meets increasing user demand for a similarly economic, yet enhanced product with improved technical features reflecting the most current state of the art. Depending on their performance class, the 6001 luminaires are a quarter to a third lighter than their predecessor models and many competing products. Users now also benefit from the extremely robust design of these slimmer, narrower units: unlike most lights, the new devices can be operated at extremely low ambient temperatures (as low as -30 °C). In many cases, this amounts to a
14 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
decisive extension of the application range that saves costs by making extra specifications unnecessary. In order to facilitate a stepby-step exchange of existing EXLUX pendants, the installation of the new units remains fully compatible to the predecessor series. Moreover, swiftly removable replacement parts ensure quick and easy maintenance. Like before, the new lights are available with customerspecific modifications on request. In addition, R. STAHL provides especially cost-efficient standard models with a power consumption of 18 W, 36 W, or 58 W that are available at short notice. Featuring 4 mm² cage clamp terminals, 5-core through-wiring, and a full-phase safety shutdown, these models are adequately equipped for the majority of all typical applications. The new series fully complies with the requirements of all current industry standards. Notably, the new silicone-based foamed gasket has been optimised for maximum durability, as stipulated by IEC 60079. This sealing solution, which is
resistant to various chemicals as well as UV radiation, the fitting’s hinge, and a newly designed central lock reliably ensure IP66/IP67 protection over many years. 6001 series lights are available as of now. However, more products are due to follow in the new EXLUX generation: in the near future, the program will be extended both by optional accessories, such as pole mount adapters, and by additional models such as emergency lights, lights with an address module, and models with T5 fluorescent lamps for use in zone 2/22. Moreover, LED lights from R. STAHL will also be available soon, though these will be based on a completely different housing and equipped with materials and features optimised for LED technology.
For more information, Web: www.rstahl.net
www.ind-safety.com
s
Cerberus PRO – ensuring comprehensive fire safety with powerful panels Combining high security standards with the latest technology Answers for infrastructure and cities.
Whether small or very large networks – with CerberusŽ PRO, you always have the right control panel at hand. They are competitive for simple applications, yet powerful enough for every application, which make them the ideal choice whatever the size and complexity of your project. Moreover, the control panels also offer a great number of safety features such as the degrade mode, which ensures that alarms are still transmitted even if a panel should fail.
Cerberus PRO control panels are also easy and intuitive to operate. In the event of an alarm, customized intervention texts facilitate correct actions. An important factor especially in stressful emergency situations when quick and reliable action is essential to save people and assets. You see, Cerberus PRO control panels are always a clever solution.
www.siemens.com/cerberus
SECURITY INDUSTRY
BUSINESS NEWS
Aditya Infotech rolls out
Star First Partner program
I
Mr. Yogesh B. Dutta, COO, Aditya Infotech Ltd.
ndia’s no. 1 Security Enterprise, Aditya Infotech Ltd. (AIL) announces India’s first Reward program in the Security Industry, in association with Aditya Star First Partners, now buying through Aditya Star First Partners will have an incredible experience with direct Rewards and Benefits. The objective of the program is to motivate, engage and directly reward Channel community buying from Aditya’s Star Partners and thereby helping them in business and improve their profitability. “Our partners and Channel Community have been the important link of our Surveillance product supply chain. They have executed many challenging key projects and delighted the customers. We acknowledge their contribution and it’s high time we rewarded them”, said, Yogesh B. Dutta, COO, Aditya Infotech Ltd. Aditya acknowledges its loyal and valued partners under the Aditya Star First program. “This is an opportunity to strengthen and value direct partners, and looking beyond to acknowledge the contribution of their business partners as well. This will not only strengthen the supply chain further, but lead to comprehend the needs increase user base”, said Yogesh B. Dutta. In India, Aditya Infotech Ltd. is an exclusive distributor partner of Dahua Technology for their brand Dahua, and CP PLUS GMBH & Co. KG, Germany for their brand CP PLUS. AIL has been aggressively distributing and marketing entire range of CP PLUS and Dahua surveillance Cameras, Digital Video Recorders (DVRs), VDP, Time & Attendance, Intelligent Home Automations and allied accessories in India. Aditya Infotech Ltd (AIL) is a leader in introducing video security and surveillance brands in India and has an expertise in designing solutions on the basis of the needs.
For more information, Email: jaya_sharma@adityagroup.com
16 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
CP PLUS introduces i-Wizard :
An intelligent video surveillance solution
C
P PLUS Technologix Labs introduces i-Wizard, an intelligent video surveillance IP solution including Cameras and NVRs, that not only provides extra highdefinition image quality, but also brings more professional, convenient and intelligent video surveillance experience driving a comprehensive upgrade with smart functions. The i-Wizard supports triple streaming, each with its own codec, frame and bitrate. Two of the streams can support full HD Resolution and one stream for a mobile phone. The ultra 3D DNR feature enhances images by eliminating image noise and improving image clarity in low-light circumstances without creating ghosting and blurring. Further, with ultra WDR features, up to 120dB wide dynamic range can be realized that greatly improves image clarity, even under extreme lighting and backlight conditions. The i-wizard series uses ultra defogging features which renders better image quality and clarity through an image correction algorithm even in extreme foggy conditions. An enhanced Smart IR can help lighting adjustments with the surroundings and can handle a vast
18 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
range of lighting conditions. Other features include smart Region of Interest (ROI), Electrical Image Stabilizer (EIS) and edge based video content analysis. Smart ROI makes important region clear in the low bitrate and thus saving the storage space. The EIS helps to stabilize the image and clean it during high motion. The Edge based video content analysis offer several detections, e.g., tripwire, intrusion, abandoned or missing, defocus detection, face and audio detection. In summary, iwizard solution is highly innovative product, providing advanced features, intelligence and self correcting features which make this a must have for all types of end customers. In India, Aditya Infotech Ltd. is an exclusive distributor partner of CP PLUS GMBH & Co. KG, Germany for their brand CP PLUS. AIL has been aggressively distributing and marketing entire range of CP PLUS surveillance Cameras, Digital Video Recorders (DVRs), VDP, Time & Attendance, Intelligent Home Automations and allied accessories in India. Aditya Infotech Ltd (AIL) is a leader in introducing video security and surveillance brands in India and has an expertise in designing solutions on the basis of the needs.
For more information, Web: www.cpplusworld.com
www.ind-safety.com
Unrivaled choice from the leader in ID card solutions
Invest with confidence in the most comprehensive range of easy-to-use, versatile & upgradable FARGO® ID Card printers from industry leader HID Global. Choosing the right ID card printer can be a challenge. The FARGO® range of easy-to-use, versatile and upgradable portfolio of printers allows organisations to make the perfect match. This advanced range of printers and encoders is designed to fulfil the demands of the most demanding organisation in terms of high quality, high security ID badges. Make the right choice, invest with confidence in a printer which has the capability to meet your customers needs now and far into the future. Look for Genuine HID products for guaranteed quality every time. To see how HID can enhance your world visit hidglobal.com Contact: lagarwal@hidglobal.com | +91 99710 08464
INDUSTRIAL SAFETY REVIEW
19
JULY 2014
PYROSIT速 NG The new generation of fire protection foam
Dust- and fibre-free installation
Simple application
Fire resistance duration of up to 120 minutes
No coating of surfaces necessary!
Many combined installations possible Soft consistency simple additional installations
OBO BETTERMANN OBO Bettermann India Pvt India Ltd.G Pvt. Ltd., Plot No O-37, Door No.8, Bharathidasan Street, Tel.: +91 44 4358 9411 Thiru Nagar, Jafferkhanpet, Chennai - 600 083, India. E-mail: info@obo.india.com Tel : +91 44 4358 94 11/ 12/ 13 Fax : +91 44 4358 9410 www.oboindia.com Email: sales@oboindia.com, www.oboindia.com
INDUSTRIAL SAFETY REVIEW 140052_A4_pyrosit_ng_Indien.indd
1
21
19.03.14JULY 11:18
2014
SECURITY INDUSTRY
BUSINESS NEWS
Modernizing premium apartment surveillance with HDCVI - Case study At TVH LUMBINI SQUARE Chennai
Background
the threat perception was real and
TVH LUMBINI SQUARE, Chennai is spread over one million square feet and containing nine, nineteen storied blocks and around 500 residential units. It is one of the premium residential location which boasts of all comforts, luxuries and aesthetic appeal per the latest trends in luxury housing. The residency, despite having good physical surveillance, lacked not so effective video surveillance system commensurate with other luxuries. The society had only 30 Analog cameras to monitor for safety and protection of people. Out of these 30, only 16 were functional!
grave as the locality housed rich
Threat Perceptions Unlike any usual residential society,
people including many HNIs. Apart from usual incidences of burglaries, road the
accidents potential
and for
loitering,
kidnappings,
harassments was significant. The safety of the kids playing in the area
needed
a
high
definition
surveillance.
Limitations of previous system The previous system relied on video surveillance with 30 Analog cameras with video quality of low resolution, which was just capable of capturing the movements, but the picture quality was very poor, which in itself considered to be out-dated. The infrastructure was made up of armored cables (RJ6 and Power cable in a single medium) and coaxial cables which were prone to damage and were costly to maintain and repair. Besides, cables deprived of cost cuts benefits to the installers project.
Expectations from the new system Fed up with long experience of security breaches and escaping of culprits, authorities felt the strong need
of
effective
surveillance
cameras’ presence to secure entire area with face recognition and identification. The other features Continue on page no.24
22 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
Keep your network performing at its full potential. Easy upgrading
Improved grid reliability
Retrofit solutions optimize infrastructure costs and ensure compliance with industry standards and legislation.
Max. Perf.
Improved network management
Max. Perf.
Max. Perf.
Communications, automation and monitoring solutions improve grid reliability.
Smart network development functionalities, such as network planning and reinforcement and simulating your grid’s future evolution.
Improve the performance of your grid infrastructure with Schneider Electric upgrading solutions. Ageing networks lead to poor performance As a grid’s electrical equipment nears end of life, malfunctions and failures begin to happen more often. Meanwhile, maintaining optimized levels of performance and efficiency becomes an increasingly difficult task.
Comprehensive ECOFIT™ refurbishment solutions
Fortunately, even electric utilities with ageing networks have options at their disposal to decrease operational costs, improve customer satisfaction, and increase service continuity. The best solution? Upgrade your network with the help of Schneider Electric™ services and solutions.
Services and solutions from a global partner Schneider Electric can upgrade your existing network and its equipment to deal with today’s energy challenges, increasing its reliability, efficiency and overall performance in a cost-effective way. With our preventive maintenance, on-site training, and ECOFIT modernization programs, we help utilities plan their future evolution and ensure reliable service to consumers. And, with our proven solutions, utilities can streamline processes and extend redundancy where needed.
Enhance and modernize ageing assets by replacing circuit breakers, contactors, disconnectors, protection relays or new panels, increasing network reliability and prolonging your switchgear’s lifetime.
Learn how to improve your network performance. Download our Whitepaper on “Medium & Low Voltage Distribution-ECOFIT” & enter to WIN a Samsung Galaxy Note 3! Visit www.SEreply.com Key Code 52885Y
© 2014 Schneider Electric Industries SAS. All trademarks are owned by Schneider Electric Industries S.A.S. or their affiliated companies. t 998-6705_IN-GB 35 rue Joseph Monier, CS 30323, 95506 Rueil Malmaison Cedex (France) t Tel. +33 (0) 1 41 29 70 00
SECURITY INDUSTRY
BUSINESS NEWS
augured well with the client’s cost and effective budget after rendering high quality video, safety and other features. We used our vast range of experience to faces other similar issues.
Factors considered before implementing the new solution The following points were were of utmost importance:
Continued from page no.22 they looked forward to: • Clarity vision of HD for easy recognition • Functional surveillance cameras 24X7 availability • Night vision CCTV cameras • Centralized control room • Cost effective and offered value for money. • High efficiency of the system • No extra cost of cabling • Warranty and services
Challenges faced by our team? Since the authorities had vast experience of CCTV surveillance, their expectations were quite exhaustive. They had the long list of complaints from residents. So, challenges for our team were too many. System Integrator and Aditya’s team’s grasp of precise customer requirement and problem solving approach helped them to win the confidence of the authorities and residents. Affixing cameras at the elevator area was a bit challenging as to arrest some disturbance in cameras. This was sorted out with the use of a special cable Flat-armored cable. This
24 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
• Safety measures of the client. • Cover the entire area. • Cover every possible extent of the total area for surveillances. • To fit into the client’s budget while maintaining high quality installations. • Armored cables were very costly
Important Features of Deployment This was the biggest surveillance project in Chennai till now with 162 numbers of HDCVI cameras of 1 mega pixel photo quality installed to cover up the entire area. Other significant points were: • Installation of surveillance cameras at elevators. • Mainly used Dome and bullet cameras. • Rendering 3 years of warranty & services. • Stakeholders Client: Jitendra, President – Lumini Square Flats Association System Integrator: R. Sasikumar, Active System Integration
For more information, E.: jaya_sharma@adityagroup.com
www.ind-safety.com
INDUSTRIAL SAFETY REVIEW
25
JULY 2014
SECURITY INDUSTRY
BUSINESS NEWS
Gallagher’s personal identity verification solution
achieves approval from U.S.
Government
G
allagher Security, a technology leader in integrated access control, intruder alarms management and perimeter protection, has announced that its security management platform is now approved for sale in the United States. The development of the Homeland Security Presidential Directive 12, has driven forward the establishment of the Personal Identity Verification (PIV) card as the standard credential for federal employees and contractors for access to federal information systems and controlled facilities. The Gallagher solution, purpose-built for the U.S. federal market, is an end-to-end system with integrated Federal Information Processing Standard (FIPS) compliant functionality from a single manufacturer that leverages existing components. The PIV solution is the first to be approved without the use of a PIV Authentication Module. It is also the first to meet the reader range requirement - its technology reads cards at a 3.5+cm distance, providing the utmost flexibility for the user. Further benefits include significant cost savings compared with nonintegrated solutions, minimized
26 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
device footprint, and ease of installation and maintenance. “The US market is a top priority for Gallagher and we’re pleased the U.S. General Services Administration has approved our solution,” said Brandy Sloan, Gallagher’s Business Development Manager, North America. “The launch of our PIV product is the result of an in-depth study of current and projected customer requirements, understanding of Homeland Security Presidential Directive 12, as well as a significant investment in research and development. We will now work hard with our channel partners to bring this innovation to the market.” The highly effective system combines Gallagher’s Command Centre and Controller 6000 (High Spec) PIV, to deliver a single, scalable security management platform. The Command Centre software works seamlessly with the user’s Public Key Infrastructure and information technology network. Gallagher’s powerful access control, intrusion detection, and perimeter security system also integrates with video and building management systems. The Gallagher Controller 6000 (HS) PIV incorporates all
the
authentication
demanded
by
the
capabilities FIPS
201-2
standard, including meeting the federal enterprise-wide need for strong contactless authentication at electronic access control points and the provision of both role and attribute-based authorization. The system supports multiple devices and interfaces, including mobile. The Gallagher PIV Solution works with PIV, PIV-I, CAC, and TWIC cards. Gallagher
North
America
currently employs 72 members of staff based in Washington DC and Riverside, MO.
For more information, Web: www.security.gallagher.co
www.ind-safety.com
Command Centre v7.20 Gallagher’s next generation security management platform
SECURITY INDUSTRY
BUSINESS NEWS
Hikvision remains in pole position in global CCTV and Video Surveillance market
F
or the third consecutive year, Hikvision has been ranked as the world’slargest CCTV and Video Surveillance Equipment provider in 2013 with a dominant 10.9% market share. This is up by more than a third, from 8% in 2012, according to the latest report from IHS Inc. (NYSE: IHS). In a year of significant achievements, Hikvision maintained or gained position in every market segment. Its most striking success was becoming the top Hardware NVR manufacturer from not being in the Top 10 in 2012. In addition, Hikvision maintained its position as global DVR leader for the fifth consecutive year, gained two places to become the world’s No. 1 supplier of Security Cameras with an 11.9% market share, and rose one place to be No. 2 in Network Security Cameras with
28 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
a 13% share of the market. As for the VMScategory, it achieved third having risen from 5th place in 2012. “This outstanding performance across the board serves, once again, to prove Hikvision’s continuing dedication to innovation and excellence in all aspects of video surveillance products.It’s also evidence of the success of Hikvision’s international marketing strategy and in-depth local customer services,”says Polo Cai, Vice President at Hikvision. “As the global CCTV market continues to move towards HD as the de facto standard, Hikvision has brought forward a full range of HD IP products, including the family of easy-to-use IP solution and Smart
IP solution, that has been highly acclaimed by our partners and customers since its introduction to the market. Hikvision is growing very quickly in all segments, continuing to outperform the market as a whole, and this is also testament to our expanding sales channels and loyalty of our customers,” continued Polo.
For more information, Web: www.hikvision.com
The table below illustrates Hikvision’s rankings(1) Market share for
IHS report 2014 IHS report 2013 Rank
Rank
CCTV & Video Surveillance Equipment
1
1
Hardware NVRs
1
below 10
DVRs
1
1
Security Cameras
1
3
Megapixel Network Security Cameras
2
2
Network Security Cameras
2
3
Analogue Security Cameras
2
2
VMS
3
5
Video Encoders
2
2
Network Video Surveillance Equipment
2
3
(1)
- The World Market for CCTV and Video Surveillance Equipment – 2014 edition, published by IHS
www.ind-safety.com
Limitless possibilities
Any lighting condition. Any environment. Any application.
With thousands of IP cameras to choose from, Pelco™ by Schneider Electric™ has the right network-based video surveillance camera for any lighting condition, environment, and application.
Choose with confidence. Learn how a busy resort benefits from our IP products and services! Download more information on Pelco IP Cameras and enter to WIN a Samsung Galaxy Note 3! Visit www.SEreply.com Key Code 52932Y
©2014 Schneider Electric. All Rights Reserved. Schneider Electric and Pelco are trademarks owned by Schneider Electric Industries SAS or its affiliated companies. All other trademarks are property of their respective owners. • www.schneider-electric.com. • 998-1205476_GMA-GB
SECURITY INDUSTRY
BUSINESS NEWS
Hikvision wins a prestigious Maximum Impact Award
H
ikvision, a global leader in video surveillance products and solutions, is proud to be announced as the winner of coveted Maximum Impact Award at the ESX 2014 in the Digital Recording Systems category of Video Security. The company’s ‘plug and play’ NVR (model DS7716NI-SP/16) was the clear winner in its category. The award reaffirms Hikvision’s commitment to research and development in video surveillance technology and the company’s pledge to provide the highest level of customer satisfaction. The Maximum Impact Award is the only program in the security industry that honors the impact new and recently introduced products & services have on security integration and monitoring companies. This year’s winners were determined by a panel of distinguished judges from the industry leadership and ranks of ESX owner and sponsors, CSAA and ESA, who evaluated the submitted entries. “It’s not just about the hype or the next big technology play - it’s about solutions for real-life security problems that help integration and monitoring companies deliver better products and services to their customers,” says ESX Chair, George De Marco. “Judges examined the
30 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
submissions for overall value, impact and effect on a company’s top and bottom line performance.” The Hikvision product that won the award is the NVR solution in a box. The ‘plug and play’ approach to IP makes the system as easy to install as analog but provides superior image resolution up to 5MP. With built-in POE, alarms, audio and on-board storage capacity for most SMB needs, additional equipment is rarely required. These features and functionality make this NVR the perfect solution as a digital recording system that elevates clients’ video security. “We are excited to be recognized as the winner of this esteemed industry accolade,” says Jeffrey He, president of Hikvision USA. “Our focus continues to be on providing best-in-breed video surveillance solutions to our customers, including security integration and monitoring companies. This award serves as a further proof of Hikvision’s innovation that helps to meet customer needs and grow profits.”
as designing and manufacturing a fullline of innovative CCTV and video surveillance products. The product line ranges from cameras and DVRs to video management software. Since its inception in 2001, Hikvision has quickly achieved a leading worldwide market position in the security industry. Hikvision possesses the world’s largest R&D team and stateof-art manufacturing facilities; both allow Hikvision’s customers the benefit of world-class products that are designed with cutting-edge technology. As further commitment to its customers, Hikvision annually reinvests 7% of its revenue into R&D for continued product innovation and improvement. Hikvision operates over 30 domestic branches in China and 16 overseas regional subsidiaries, in conjunction with over 30,000 partners all over the world to achieve a truly global presence. Hikvision is now publicly listed on the Shenzhen Stock Exchange.
About Hikvision Hikvision is the world’s largest supplier of video surveillance products and solutions. The company specializes in video surveillance technology, as well
For more information, Web: www.hikvision.com
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
Godrej Security Solutions awarded the prestigious TOCICO International Achievement Award One of the only two Indian companies to be awarded this year
T
he Theory of Constraints International Certification Organization (TOCICO) recently awarded Godrej Security Solutions with this year’s International Achievement Award for its comprehensive and superior end to end processes which enable and ensure timely delivery to customers. The selection criterion for this award is noted to be stringent and has been awarded to GSS due to its consistent application of Theory of Constraints (TOC) and achieving consistent results over a significant period of time that it was implemented. The award was presented to GSS by Dr. Lisa Lang, Chairperson of the TOCICO Board at the 2014 TOCICO International Conference held in Washington DC. The conference was attended by members of the TOC international community from around 77 countries. The award recognizes the adoption of the TOC framework to revamp GSS’ supply chain of its physical securities business with the objective of improving on-time delivery performance, reducing lead-time, and enhancing availability. This has been implemented and achieved in the two years of its implementation. GSS was also invited to make a presentation in the plenary session on the company’s journey to fulfil its vision despite the economic slowdown. The adoption of the TOC framework has significantly boosted the company’s revenue showing results of increasing it by
32 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
as much as 300% in the first two years and quadrupling it thereafter. Furthermore sales have doubled in the last three years and tripled the return on capital.
Institution Business • On time performance improved to more than 90%, while the production lead time reduced by over 50% • Lead time to customers reduced by 50%, while variability in lead time reduced seven times • Output in the plant almost tripled, and this has been achieved with significant reduction in overtime and with the least addition of manpower • Work-in-progress inventory reduced by more than 50% & finished goods stock reduced by 50% • Rate of new product introduction increased by 200%
Retail Business • Availability of all items is in the range of 90% • Number of distributors have almost tripled, along with doubling of range at the distributor • Number of retailers increased four times, along with doubling of range at the retailer Overall Result • Sales increased by 39%, while profitability almost tripled • Profitability of the company has doubled
Mr. Dara Byramjee - Executive Vice President and Business Head, Godrej Security Solutions said “GSS has always focused on meeting the consumers’ needs with excellence and efficiency. We are happy that the efforts are recognized through this award and are honored to receive it. We have worked along with our partner Vector Consulting Group to improve our overall performance by implementing the TOC principles and methodology. We will continue to uphold the high values of customer service and undertake such efforts in the future so that we are able to deliver only the best to our customers.” Mr. Rahul Naik - Associate Vice President and Head supply chain Management, Godrej Security Solutions who was present in Washington D.C to receive this award on behalf of the company said, “It has been our pleasures to deliver the best products and services to the customer with minimum barriers in terms of delivery time or customer service. This award comes as recognition of the efforts put in by our team at GSS over the years in streamlining processes. We are delighted to have received this honor and will continue to serve our customers with better quality and efficiency in the coming years and more.”
For more information, Web: www.godrejsecure.com
www.ind-safety.com
DANGER ZONE SAFE NEW PELICAN™ 2745, 2755 AND 2765 SAFETY APPROVED LED HEADLIGHTS: MULTI-BEAM FUNCTIONALITY AT YOUR FINGERTIPS
PELICAN™ 2765 LED HEADLIGHT • High, low, and flashing modes • Downcast LEDs • Full level battery indicator AVAILABLE FALL 2014
PELICAN™ 2755 LED HEADLIGHT • High, low, and flashing modes • Includes low battery warning
PELICAN™ 2745 LED HEADLIGHT • High, low, and flashing modes
Pelican™ safety approved headlights are designed for use in hazardous environments. They are not only Class I Div1 approved but also shine bright (up to 100 lumens) and burn long (up to 40 hours). Additional features include downcast LEDs for illuminating your path, and a battery level indicator so you won’t be left in the dark. Count on Pelican to bring you the best in lighting design and technology. The new Pelican 2745, 2755, and 2765 headlights: Guiding you safely through the danger zone. ™
n All Models
are IPX4
n Includes
Cloth and Rubber Straps
n 3 AAA
Alkaline Batteries Included on All Models
Black Yellow
GUARANTEED FOR LIFE
SEE PELICAN.COM/WARRANTY FOR FULL DETAILS.
www.pelican.com/isr
Pelican Products and Services India Pvt. Ltd. Level “4”, Augusta Point, Sector-53, Golf Course Road, Gurgaon 122002 Haryana, India Tel +91 124 4354148• Fax +91 124 4354001 All trademarks are registered and/or unregistered trademarks of Pelican Products, Inc., its subsidiaries and/or affiliates.
SECURITY INDUSTRY
BUSINESS NEWS
Matrix Comsec awarded as the best electronics company by GESIA
Deepak Chudasama (L) Business Manager – Govt. Sales & Projects and Mayur Bhavsar Officer – Business Development , Matrix Comsec receiving the award from Mr. James Bryce – Deputy Director, UK Trade & Investment, India.
V
adodara based Matrix Com-
sec was awarded the Best Electronics Company Award in recently concluded
GESIA
Awards
2014,
Ahmedabad. Matrix has won the award for the third time. The Award has been instituted by the Gujarat Electronics and Software Industries Association (GESIA) to acknowledge the achievements of the ICT & Electronics industry in Gujarat. On the occasion, the Manag-
technologies, design and manufacturing. We export Matrix telecom and security solutions to more than 30 countries including USA, Germany, Italy, Spain, Portugal, Australia and UAE. This award will go a long way in motivating us towards establishing a world-class product company from Gujarat, India.” Matrix is a true-blood indigenous product and solutions company with serious commitment and investments in product design, manufacturing and marketing-sales It is the technology and the quality of its products that has helped Matrix defy competition from well established brands. For the 14 award categories, entries were received from companies representing a diverse and inclusive profile of the ICT industry in Gujarat. A jury of intellectuals and experts, ranging from industry experts to academicians have assessed the entries and picked the awardees. These awards are the only of their kind at the State level, aiming at recognizing “Excellence” on the basis of quantitative as well as qualitative criteria which shall set a benchmark in the industry. This unique initiative is intended to acknowledge achievements of the different players in the ICT business of Gujarat.
ing Director of Matrix Comsec, Mr. Ganesh Jivani said, “We are happy to win GESIA award for the Best Electronics Company. We thank GESIA for recognizing Matrix for our
34 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
For more information, Web: www.MatrixComSec.com
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
Toshiba & Rashi concludes a 4 city training program for surveillance partners
A
hmedabad about 60 partners attended the program and Rajkot received over-whelming response of more than 80 partners whereas Nagpur answered queries of about 60 partners present in the event. Indore was also very responsive for the surveillance market by nearly 50 partners showing up on the event with full participation. Mr. Dinesh Malhotra from Robocam Intelligent Security, Ahmedabad says “The training was very useful for us and helped us understand the product better. The whole team was ready to answer all our queries and listen to our doubts. The products showcased during the program were latest and will help us inform our customers in a better way. Since the event we have added Toshiba drives in our line of products and they are doing well.” Mr. Polad Garda, Manager Marketing, Toshiba Storage Devices, says “We were happy to see a good turnout with such participative audience. Some partners were thrilled to know about the Toshiba hard drive specifically made for Surveillance Systems & Video Stream applications with various features and a large range of multiple storage capacities.” Mr. Rajesh Goenka, VPSales and Marketing, Rashi Peripherals adds “Toshiba and Rashi team have travelled all the 4 cities and returned with good appreciation from the partners for this initiative.
36 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
The number of partners attending range from 50 to 80 partners that too in all non-metro cities is a positive feedback in itself. We hope to plan for many such training programs to educate more partners about these latest products and technological development as much as possible.”
About Rashi Peripherals Pvt ltd Rashi Peripherals has emerged to be one of the leading value added distributors in the country with 25 years of presence in IT Distribution. Today Rashi has 58 branches offices and 60 centers spread across A, B, C & D class cities of India and more than 9000 Partners/Customers in 750 cities/Towns. Our distribution brands comprise of World leaders like ADATA, AMD, APC, ASUS, ECS, HP, INTEL, LOGITECH, LENOVO, LEADTEK, NETGEAR, NORTON, NVIDIA, MOBOTIX, PLANTRONICS, SANDISK, SAMSUNG, TARGUS and TOSHIBA. Established in the year 1989, Rashi has come a long way in distribution and is amongst the TOP 5 IT distributor in India and also
amongst the TOP 50 IT (Hardware, Software & services) companies in India. We have grown consistently over the years @ CAGR of 29% with revenue of 360 Million USD / Rs.2180 crores for FY 2013-14. Rashi team of 300+ sales & marketing professionals help in building the Brand and also strong channel engagement. Dedicated Marketing and PR initiative make Rashi ‘ The Real Value Added Distributor ‘. Rashi is known for its various innovative marketing programs with conceptualizing and implementing schemes/rebates being its key strengths. One of its very popular flagship events is the Channel Business Forum (CBF) which is an equal opportunity forum that brings together participating vendors and channel partners on a common platform. Started off in 2005 Rashi initiated CBF event series to inform, educate and train channel partners on the upcoming technologies and products. All 9 edition of CBF together have covered more than 30409 partners in 200+ cities.
For more information Web: www.rptechindia.com
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
HID Global’s trusted tag services delivers home health “Proof of Presence” to comply with Medicaid EVV mandates Key Highlights: • Tags combat fraud by leveraging HID Global and Near Field Communications (NFC) technology to deliver a highly secure, Medicaid-compliant Electronic Visitor Verification (EVV). • HID Trusted Tag Services™ turns NFC-enabled smartphones into trusted verification devices capable of delivering indisputable “proof of presence” of the caregiver in the patient’s home. • Because no special equipment or applications are required, HID Trusted Tags are a costeffective and user-friendly compliance solution.
H
ID Global®, a worldwide leader in secure identity solutions, announced that its HID Trusted Tag Services™ meets the EVV requirements for home health agencies enacted by several states as a condition of Medicaid participation. HID’s trusted tags provide indisputable “proof of presence” of the caregiver in the patient’s home, thereby eliminating the opportunity to falsify records to support fraudulent claims. Medicaid and Medicare reimbursements for home-based care in excess of $31 billion and a booming home health industry that is expected to reach a value of $150.8
38 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
billion by 2018 have given rise to a multi-billion dollar fraud problem for public and private insurers. One of the most common fraudulent activities is submission of claims for payment on services that were never provided, a situation exacerbated by manual verification processes that make it easy to falsify records pertaining to the presence of a caregiver at a patient’s home. To eliminate fraudulent claims, a several state Medicaid programs now require home health agencies to implement EVV systems to prove that a caregiver was physically present in the patient’s home for the required length of time. While some states mandate the use of specific EVV equipment, others simply require EVV systems that meet minimum technical and functional standards. “HID Trusted Tags satisfy these requirements by leveraging the near ubiquitous nature of NFC-enabled mobile devices to enable a highly secure EVV system that is both easy to use and impossible to defraud,” said Marc Bielmann, vice president of Identification Technologies with HID Global. “Our patented tag technology optimizes security and convenience, eliminating the need for special equipment to read tags or for users to modify their mobile device or download apps.” Tamper-proof tags are attached to or embedded into an object inside the patient’s home in such a way that they cannot surreptitiously be
removed or altered. When the caregiver arrives, they tap the object with their NFC-enabled device to communicate secure information to HID Global’s cloud-based authentication platform. The data read from a trusted tag has security and privacy attributes that change on every tap, providing an indisputable and auditable EVV record for home health agencies to use for billing and reimbursement. “HID Trusted Tag Services also integrates seamlessly into most clinical and administrative management software systems, which means agencies can continue to use the systems that most closely meet their unique needs,” said Bielmann. “In addition to sparing the expense associated with system upgrades or replacement, easy integration means data collected at the point of care can be transmitted back to the agency in real-time for faster and more accurate claims processing and advanced analytics.”
For more information, Web: www.hidglobal.com
www.ind-safety.com
Lockout / Tagout
Products
CertiďŹ ed Products
Electrical Panel device
MCB lockout device
Pneumatic Lockout Device
VALVE LOCKOUT DEVICE
ULD Lockout device
GATE VALVE LOCKOUT device
Cable Lockout device
Tag Safety padlock device
hasp lockout device
SAFETY SOLUTIONS PVT. LTD.
CORPORATE OFFICE NORTH : DELHI 1327,Street Kunde Walan, Ajmeri Gate, Delhi-110006 Tel:+91-11-30114165 / 30114265 / 42786467 Mobile:+91-8287837722 / 9310659005 / 9310659002 Fax: +91-11-23210925 / 30114265 Email: info@aktionsafety.com, loto@aktionsafety.com, sales@aktionsafety.com website : www.aktionsafety.com, www.loto.co.in
EAST REGION
Email : Kbo@aktionsafety.com Mobile : 09903975602
WEST REGION
Email : west@aktionsafety.com Maharashtra : 08055291791, 09310659007 M.P. : 08287837725, 09310659007 Gujarat : 08287837725, 09310659007
SOUTH REGION Email : south@aktionsafety.com Hyderabad : 07799443352 Bangalore : 08147860174 Tamilnadu : 09310659011 Kerala : 07799443352
SECURITY INDUSTRY
BUSINESS NEWS
New Irish ePassport wins International Design Award
H
ID Global®, a worldwide leader in secure identity solutions, congratulates DLRS and the Irish Department of Foreign Affairs and Trade on winning the Regional ID Document of the Year Award 2014 at the annual High Security Printing Conference in Milan for the newly designed Irish electronic passport (e-passport). The award was presented to the Irish Department of Foreign Affairs. The Regional ID Document of the Year award aims to promote the best in security printing, system infrastructure and implementation of a government passport, identity or other security card scheme. In presenting the award the conference organizers, Reconnaissance International, recognized the pioneering use of many new high security printing technologies and techniques by the consortium led by DLRS, HID Global and X INFOTECH. “We are delighted that the newly designed Irish e-passport has gained international recognition,” said Joe Nugent,
H
Director of Passport Services, Irish Department of Foreign Affairs. “Not only does our new passport use the latest security technologies to protect citizens’ identities but the use of images depicting Irish culture and landscapes has created a sense of pride among our citizens.” The new Irish e-passport is both more attractive and secure than its predecessor and combines the latest security technology with selected imagery that represents the culture, history and people of Ireland. Prime for both security and Irish culture is the image of the BrunaBoinne stone printed using SPARK colour shifting ink technology. Another feature involves images situated on the edge of each pair of pages – when the pages are partially bent for the edges to be side by side, the two images form a complete image. The new passport also features poems from three of Ireland’s bestknown poets – NualaniDhomhnaill, William Butler Yeats, and James Orr. “DLRS is proud to have led the
team that created the document that won this prestigious award,” said David O’Connor, Sales Director, DLRS. “Our goal was to deliver a secure and flexible e-passport solution within the budget and timeline set by the Irish government. I am happy to report we exceeded our goal not only meeting time and budget parameters but creating one of the most secure and visually appealing e-passport designs to date.” The cost of the new passports is nearly half that of their predecessors, which will result in annual savings of 4 million Euros. The award was accepted by Fiona Penollar of the Irish Passport Office as well as Joseph Callaghan and William Byrne of DLRS. “We would like to congratulate Ireland’s Department of Foreign Affairs and DLRS for winning this international award,” said Rob Haslam, Vice President Government ID Solutions, HID Global. “We are proud our polycarbonate data-page technology played a part in helping to achieve the award-winning design.”
HID Global and ASSA ABLOY help secure 2014 FIFA world cup
ID Global®, a worldwide leader in secure identity solutions, announced that its access control products, along with door-opening solutions from parent ASSA ABLOY, are being used in various solutions across six of the 12 stadiums in Brazil now hosting the 2014 FIFA World CupTM football matches through July 13, 2014. “We are very excited to be playing such an important role in protecting the safety and security of the fans, players and staff during this year’s FIFA championship matches,”
40 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
said Gustavo Gassmann, Sales Director, Brazil with HID Global. “Securing large-scale outdoor sporting venues is one of the industry’s most difficult security challenges, but HID Global & ASSA ABLOY have extensive experience in this area. Working with our local integration partners, we have delivered secure solutions that are designed to provide robust protection for the people, equipment and infrastructure at these World Cup venues.” HID Global and ASSA ABLOY products are being used at new
stadiums in Fortaleza, Natal, Recife, Curitiba, and Brasilia, as well as at the legendary Maracanã Stadium in Rio de Janeiro, which will host the World Cup final on July 13 and both the opening and closing ceremonies for the 2016 Olympics. The two companies’ products have also been recently deployed at the Arena do Grêmio in Porto Alegre and the Allianz Parque (formerly the Arena PalestraItália) in Sao Paulo. For more information, Web: www.hidglobal.com
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
Genetec and Vidcie partner to
provide mobile video surveillance capabilities to law enforcement and security professionals
Genetec Security Center Now Integrates with Vidcie Lookout Wearable Cameras
G
enetec™, a leading provider of unified IP security solutions and Vidcie, a leading provider of mobile live video streaming services announced the integration of Vidcie Lookout wearable camera systems with the Genetec unified security platform, Security Center. Vidcie on-body cameras provide law enforcement officers and security personnel with on-demand, handsfree live streaming video that can be transmitted from the field over cellular or Wi-Fi networks. When connected to Security Center, Vidcie cameras extend coverage and add new levels of situational awareness to security operations. With increased use of wearable cameras by law enforcement and public safety agencies, the integration provides operators with greater awareness of real-time events from agents on patrol, as well as the ability to remotely record video streams from the scene of an incident for evidence. Intelligence built into the Vidcie server software and cameras provides dynamic real-time adaptation of video streams across mobile networks to ensure reliable, low-latency video output for the viewer. Available in the latest release of Security Center, the integration allows Vidcie Lookout cameras to be easily enrolled within a Genetec
42 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
system and seamlessly viewed and recorded alongside other video devices. With the integration of Vidcie cameras in Security Center, organizations can extend their surveillance operations by equipping personnel with wearable, hands-free cameras that offer a firstperson point of view, or that can be used as a mobile video device in fixed positions for temporary events that require surveillance. The use of on-body cameras allows law enforcement, emergency response, and corporate security personnel to maintain video communication when either planned or unexpected events go beyond the sight of fixed surveillance perimeters. “Because Security Center is based on an open architecture, we are able to forge partnerships with innovative technology developers and integrate new cameras when they are released. With the addition of Vidcie cameras to our ecosystem of partner devices, we can now provide support for purpose-built, wearable cameras for law enforcement, public safety, and corporate organizations that require a mobile, hands-free solution to extend their surveillance operations,” said Morgan Pasnon, Senior Technology Alliance Manager at Genetec. “Vidcie adds real-time point-
of-view mobile video to existing fixed surveillance and increases the coverage provided by Genetec Security Center. Our unique mobile video service enables unprecedented remote visibility and quick, effective situational response by public and private security personnel,” said Ron Callison, Director of Channels and Alliances at Vidcie
About Genetec Genetec develops open-platform software, hardware and cloud-based services for the physical security and public safety industry. Its flagship product, Security Center, unifies IP-based video surveillance, access control and license plate recognition (LPR) into one platform. A global innovator since 1997, Genetec is headquartered in Montreal, Canada, and serves enterprise and government organizations via an integrated network of resellers, integrators and consultants in over 80 countries. Genetec was founded on the principle of innovation and remains at the forefront of emerging technologies that unify physical security systems.
For more information, Web: www.genetec.com
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
VIVOTEK, along-with Bajaj Electricals Ltd, fulfills diversified market demands in India
V
IVOTEK, has partnered with the India-based prestigious company Bajaj Electricals Ltd & is pleased to announce the successful completion of Secutech India 2014 held at New Delhi in late June. Bajaj Electricals, a 75-year old trusted company with more than 1400 products, is highly recognized courtesy its appliances, fans, lighting & luminaires products, along-with its Engineering Projects. Bajaj Electricals is also marketing and servicing the prestigious Morphy Richards brand. Integrated Building Management Systems (IBMS) of Bajaj Electricals offers a product portfolio that includes Building Management System, Fire Detection Systems, Access Control System, CCTV Surveillance System and Lighting Controls. Viewing the increasing demand for more SMB scale and consumer-oriented surveillance applications, VIVOTEK has developed a series of compact, simple and smart IP-based surveillance solutions. VIVOTEK has tied up with Bajaj Electricals in India, aiming to provide end-users with more surveillance options to make their life safer and better. To incorporate more closely and seamlessly, Bajaj Electricals has included VIVOTEK’s surveillance products to its brand “nxt”, bolstering the offering of this product line. After the official launch at Secutech India 2014, VIVOTEK’s compact,
44 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
simple and smart IP-based surveillance products are now available in markets all across India.
About VIVOTEK VIVOTEK, established in 2000, has quickly taken its place as a leading brand in the security industry. Known for delivering world-class IP surveillance solutions, VIVOTEK specializes in system applications and integration. With innovative R&D teams adopting groundbreaking codec technologies, VIVOTEK provides a wide range of products, including network cameras, video servers, video receivers and central management systems. VIVOTEK (TAIEX: 3454) was listed on the Taiwan Stock Exchange in 2011. In 2008, a branch office was set up in California, USA. VIVOTEK is currently working with more than 150 authorized distributors in over 80 countries.
For more information, Web: www.vivotek.com
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
Rosslare launches revolutionary open to secure™ (O2S) readers
R
osslare Security, a leading global provider of professional Access Control solutions, is pleased to announce the release of its new family of Open to Secure™ (O2S) smart card readers. These readers support reading from and writing to the secure memory of the world’s most accepted RFID technologies – MIFARE® DESFire® EV1, MIFARE® Plus, and MIFARE® Classic. Rosslare’s Open to Secure (O2S) family of readers are highly flexible smart card readers that redefine ease of use and high security in the world of RFID access control solutions. With MIFARE DESFire EV1 and MIFARE Plus credentials, you have access to the highest levels of cryptographic security with support for 128-Bit AES encrypted communications between reader and credential. With O2S preprogrammed readers and credentials, you can have the highest level of secure access control solutions right out of the box. Choose from a variety of standard configurations to get
the functionality that you need – revolutionary and modern industrial design
(US/UK/Asia
or
mullion
mount), proximity only or proximity & keypad authentication, pigtail or terminal block termination, and multi-format
Wiegand
or
Open
Supervised Device Protocol (OSDP) outputs. The O2S readers utilize a three-pass authentication technique together with a random number generator (high-speed triple-DES data encryption) and a flexible memory
organization
structure
to guarantee data integrity during contactless transactions. They can be programmed as a Card Serial Number (CSN) or as a MIFARE Plus/ DESFire application data reader. The MIFARE Plus/DESFire reader utilizes DES encryption and is compliant with the Common Access Card (CAC) standard for secured access control systems. The readers meet IP65 and are suitable for both indoor and outdoor use. “We are very excited about the launch of our O2S smart card readers,” said Rosslare Director of EU Sales Don Weintraub. “Global markets are moving towards higher security solutions, and with our O2S readers we continue to be at the fore of card reading technology.”
For more information, Web: www.rosslaresecurity.com
46 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
Budget 2014: Boosting demand for Electronic Security Products association with the Bengal Chamber
MarketsandMarkets, ”Booming of
of Commerce and Industry. The
Indian smart city projects is due to
project will be focusing on reducing
growing urban population, which is
carbon footprint in the industrial
expected to reach around 590 million
town of Haldia. Recently, IBM has
creating pressure in the existing
also announced its partnership with
urban infrastructure. Such smart
Lodha Group to build and manage
city projects will link all citizens,
smart city infrastructure for Palava,
cities, government and many more
spanning over 4000 acres, located
with each other on a real time basis.
at the junction of Navi Mumbai and
It will also focus on reducing carbon
Dombivali. Global networking products
emission and smooth flow of traffic
T
major Cisco Systems in partnership
in the urban cities.”
he Indian IT and Security industry was looking forward to the budget announcement as this will have a direct impact on the demand for many such technologies that are a prerequisite for building Smart infrastructure. Finance Minister, Arun Jaitley in his maiden budget speech announced to spend Rs 7,060 core, for developing 100 ’smart cities’ in the country. Jaitley said,”Prime Minister Narendra Modi has a vision of developing 100 satellite towns of the larger cities as ‘smart cities’.” Earlier this year, the Singapore foreign minister has also shown interest in replicating their Tianjin Knowledge City model in several parts of India. Smart City is a concept aimed to provide a set of new generation services and infrastructure with the help of Information and Communication Technologies (ICT). Smart cities are differentiated in terms of their governance, technological advances, economic benefits, and social and environmental standards.
48 | JULY 2014
According to the latest study of
| INDUSTRIAL SAFETY REVIEW
with the Electronics City Industries
Upcoming Smart City projects in India
Association (ELCIA) is working on a
Smart City Kochi, is the one of the
the electronics city in Bangalore into
largest business parks of India and
a smart city with smart parking, smart
the second city in the Smart city
CCTV
global network. Smart city Kochi, is
lighting, smart water management
a joint venture between Government
and community messaging.
pilot project, which would soon turn
surveillance,
smart
street
of Kerala and Tecom (a subsidiary of
The first phase of this smart
Dubai Holding). It is India’s largest
city project will be rolled out in Elec-
knowledge based township creating
tronics City and will serve as a repli-
90,000 direct jobs.
cable model for the rest of Bangalore
India’s first International Fi-
as well as other cities in India, across
nancial Tech City, Gujarat Interna-
the region and other emerging mar-
tional Financial Tech City (GIFT)
kets. Some of the major players in-
would be setup at the approximately
cluded in the Smart City market are
investment of Rs 70,000 crores and is
IBM,
the first green field investment proj-
ABB, Cisco, Cubic, Honeywell, Intel,
ect. The project has been initiated in
Siemens and Oracle.
Alcatel-Lucent,
Accenture,
2011 and is expected to be completcity project, which would be a com-
Opportunities for Electronic Security Market
mand center of Information, Com-
The Indian IT and Security industry
munication and Technology (ICT)
was looking forward to the budget
managing every aspect from traffic
announcement as this will have a
to water movement.
direct impact on the demand for
ed by 2021. It will be futuristic smart
Haldia Project is a pilot project initiated
by
European
Business
and Technology Centre (EBTC) in
many such technologies that are a prerequisite for building Smart Continue on page no.50
www.ind-safety.com
INDUSTRIAL SAFETY REVIEW
49
JULY 2014
SECURITY INDUSTRY
BUSINESS NEWS
Continued from page no.48 infrastructure. Sharing his pre-budget expectations, Sudhindra Holla, Country Manager, Axis Communications India said,” The government has various initiatives to build smart cities; and the budget needs to be concurrent with the plans. With the growth in infrastructure, security and surveillance will move to the next juncture of critical importance and in the smart cities. Video surveillance will be used beyond monitoring, to gather intelligent data. The budget, therefore, should set aside substantial investment, for video surveillance solutions.
Technologies and the convergence of various technologies play key roles in the development of smart cities. Video surveillance, biometrics and advanced database systems are gradually changing the way intelligence is being collected and treated. Without being noticed, CCTVs on the streets increase public safety through better surveillance. Smart technology is already being applied in our country through smart phones, contactless payments, near field communication (NFC), the integration of smart cards with biometrics etc. It is believed that the next stage for the use of
smart technologies will involve the integration of smart technologies with video surveillance, biometrics, access cards, etc. Through this integration, law enforcement authorities will be able to identify criminals/offenders in a city and accordingly take steps towards enhancing their level of understanding. Countries like Singapore, Malaysia, Indonesia etc are already reaping the benefits of smart technology in the form of smart national ID cards wherein the users’ details are present on the card itself thereby proving to be a key identification card for the user.
E-vision adds automatic boom barrier EV ABAC to its surveillance range Multi-featured access control device for smooth flow of traffic
E
-vision, one of the leading providers of advanced, new-age surveillance products, added new product line to its portfolio with the launch of EV ABAC - Automatic Boom Barrier and road blocker. Boom Barrier Security Gates have been designed to systematically handle the entry and the exit of vehicles in
private or public parking. The automatic boom barrier identifies each vehicle that passes through it and avoids the illegal entry and exit of vehicles.Users can con-
• Input signal - Remote control and push button • Access control with Proximity card • Auto close function variable from
trol the device in most convenient
5 seconds to 30 seconds
way with remote control for open-
• Operate 5000 cycles per day
ing, closing and stopping the barrier.
• Boom length up to 5.5 meters
The boom barrier is equipped with
• Provides reverse operation
Proximity card reader, where an em-
• Spike
road
mechanism
card can enter or exit by just holding
• Microprocessor
the card near the reader. The device is also featured with magnetic card reader for easy swiping.
• Vehicle identification system
| INDUSTRIAL SAFETY REVIEW
with
based
drive
control
panel • Restricts & stops forceful entries of vehicles • Maintenance
Features:
50 | JULY 2014
block
ployee or a visitor with the proximity
free
electro
mechanical device system • Magnetic card reader
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
Axis introduces modular miniature camera series with wide dynamic range for superb image detail
AXIS F Network Camera Series presents a highly flexible, modular network camera series that involves extremely discreet HDTV 1080p cameras with wide dynamic range. The new series is ideal for ATMs (automated teller machines), banks, stores, hotels, as well as rugged environments such as ambulances and police cars.
A
xis Communications, the world leader in network video, introduces a modular camera series that not only gives customers discreet surveillance solutions that provide high image detail, but also great flexibility in choosing the units that are ideal for the installation. “AXIS F Series enables great flexibility and discreetness with superb video performance, even in high-contrast lighting conditions,” says Erik Frännlid, Axis’ Director of Product Management. “The series is based on a divided network camera concept, where the camera is split into a lens and image sensor unit, and a main unit. This concept was first introduced in the AXIS P12 Series. When we developed the AXIS F Series, we took into account the feedback we received from AXIS P12 to provide customers with even better solutions.” The divided network camera concept allows a small sensor unit to be installed discreetly in tight places and the bigger main unit to be placed elsewhere and away from public view. AXIS F Series consists of units that are all sold separately. The series includes AXIS F41 Main Unit and four compatible AXIS F sensor units with different form factors and lens types for different field of views. AXIS F41 Main Unit houses the processor, network, power, SD card slot and other connections, and can
52 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
connect to one AXIS F sensor unit. Each sensor unit, which consists of a lens and image sensor, comes with the choice of a 3-m or 12-m (10-ft. or 39-ft.) pre-mounted cable for connecting to the main unit. “The small sensor units give users the flexibility to easily and discreetly install them, even in very tight spaces,” says Frännlid. “They can be flush-mounted in walls, ceilings, doorways, elevators and behind sheet metal with only the small lens surface visible-in the case of the pinhole unit, just a tiny hole for the lens. Certain AXIS F sensor units can also withstand tough conditions such as vibrations, shocks & temperature fluctuations, which make them ideal for use inside and outside of emergency vehicles. The modular concept also gives customers the flexibility to purchase the sensor unit that is ideal for their application.”
AXIS F41 Main Unit supports the following features: • Axis’ Wide Dynamic Range (WDR) – Forensic Capture, which enables details from both bright and dark areas of a scene to be visible; ideal for scenarios such as at entrances or in front of ATMs where the subject may be dark against a bright background, or in nighttime situations where Continue on page no.54
www.ind-safety.com
SECURITY INDUSTRY
BUSINESS NEWS
Continued from page no.52
•
• •
• • •
•
the camera must handle lowlight environments together with bright lights from vehicles, street lamps, signage and stores HDTV 1080p video at up to 50/60 frames per second, ideal for capturing fast-moving objects and generating smoother video Two-way audio Input/output ports to external devices for enhanced alarm management RS232 port for integration of external data to the video Full-sized SD card slot for local storage Power over Ethernet, as well as the option of connecting to an external power supply Intelligent video capabilities such as video motion detection, active tampering alarm and downloadable applications through the AXIS Camera Application Platform
The four compatible AXIS F sensor units (with two different cable lengths to choose from) consist of: • IP66-rated AXIS F1005-E Sensor Unit with a fixed lens and 113° horizontal field of view • AXIS F1015 Sensor Unit with a varifocal lens for a 53° to 108° horizontal field of view
AXIS F Series offers a main unit and sensor units with pinhole, standard, varifocal, and fish-eye lenses for field of views up to 194° in highly discreet surveillance installations. The main unit can connect to only one sensor unit at a time
54 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
• AXIS F1025 Sensor Unit with a pinhole lens and 89° horizontal field of view • IP66-rated AXIS F1035-E Sensor Unit with a fisheye lens for a 194° horizontal field of view. AXIS F41 Main Unit offers AXIS Camera Companion video management software and is supported by AXIS Camera Station and the industry’s largest base of video management software through the Axis Application Development Partner Program. AXIS F41 also includes support for AXIS Video Hosting System and ONVIF for easy camera system integration. Available in July are AXIS F41 Main Unit and AXIS F1005-E and AXIS F1015 Sensor Units . Available in September 2014 are AXIS F1025 and AXIS F1035-E Sensor Units .
About Axis Axis offers intelligent security solutions that enable a smarter, safer world. As the global market leader in network video, Axis is driving the industry by continually launching innovative network products based on an open platform - delivering high value to its customers and carried through a global partner network. Axis has long-term relationships with partners and provides them with knowledge and ground-breaking network products in existing and new markets. Axis has more than 1,600 dedicated employees in more than 40 countries around the world, supported by a network of over 60,000 partners across 179 countries. Founded in 1984, Axis is a Swedenbased company listed on NASDAQ OMX Stockholm under the ticker AXIS. For more information, Web: www.axis.com
www.ind-safety.com
INDUSTRIAL SAFETY REVIEW
69
JUNE 2014
SECURITY INDUSTRY
BUSINESS NEWS
Allied Telesis unveils more details about its vision for Software Defined Networking (SDN)
IP Networking Leader Collaborates with Partners to Engineer Powerful SDN Applications, Leveraging Increasing SDN Adoption into Enterprise Networks with Creation of Value-Driven Business Apps
A
llied Telesis, a global provider of secure IP/Ethernet switching solutions and an industry leader in the deployment of IP Triple Play networks, unveiled more details about its unique vision for the evolution of Software Defined Networking (SDN). Less than one year after the launch of the Allied Telesis Management Framework™ (AMF) solution, Allied Telesis declared that although there is a great deal of activity in SDN-based solutions in the data center, the adoption of SDN into enterprise networks will only gain momentum once applications are created that deliver true value to business. The company determined that extracting business value from SDN would require several steps. Allied Telesis recognized that previous SDN innovation had primarily focused on the control plane, leaving the management plane underdeveloped. With that in mind, the first step Allied Telesis took was to develop AMF, which delivers an innovative management solution that simplifies network management and drives down operating costs. Next, Allied Telesis created an end-to-end SDN capable platform that is compliant with the latest ratified OpenFlow standards. This platform is designed to be a hybrid, capable of both OpenFlow and traditional intelligent Layer 3 switching simultaneously, and configurable on a per-port basis.
56 | JULY 2014
| INDUSTRIAL SAFETY REVIEW
This platform can be managed by AMF to provide a powerful and costeffective management solution for SDN networks. Finally, Allied Telesis is currently working with partners to create SDN applications that solve real-world business problems. The initial focus is on office applications for Enterprise customers. SDN opens up innovative new ways to provide the flexible, secure, reliable communication options that are being driven by the take-up of mobile devices and everincreasing convergence in Enterprise networks. Allied Telesis has decades of experience in creative problemsolving in Enterprise networks, and is now applying that experience to its SDN-based solutions. The powerful combination of AMF in the management plane and OpenFlow in the control plane provides an ideal platform for further innovation to develop unique and comprehensive networking solutions. Additionally, the flexible AMF platform supports legacy Allied Telesis products, including workgroup switches, and is able to provide a legacy network system to an AMF system, without incurring a major investment. Mr. Seiichiro Sato, Director of Global Product Management at Allied Telesis said, “As a member of the Open Networking Foundation (ONF), Allied Telesis is fully
committed to finding ways to deliver value from SDN solutions to our customers. We are excited to be able to demonstrate the first of these SDN applications, based on Allied Telesis platforms, at Tokyo Interop 2014 in June.” In the future, Allied Telesis development initiatives will further enhance its AMF/OpenFlow offering to support wireless devices, larger networks, and a variety of business models.
About Allied Telesis Inc. Founded in 1987, and with offices worldwide, Allied Telesis is a leading provider of networking infrastructure and flexible, interoperable network solutions. The Company provides reliable video, voice, and data network solutions to clients in multiple markets including government, healthcare, defense, education, retail, hospitality, and network service providers. Allied Telesis is committed to innovating the way in which services and applications are delivered and managed, resulting in increased value and lower operating costs.
For more information, Web: www.alliedtelesis.com
www.ind-safety.com
IN FOCUS
e –surveillance: The cost benefits &
ROI for banking sector
Mr. Sunil Rao, Head - SaaS enterprise, Zicom
Q. How the system works? Is this technology developed after bangalore incident ? The service offered for ATM security is e –surveillance and was offered to Banks much before the Bangalore incident. This solution is a comprehensive security solution designed exclusively for ATMs & integrates Intruder Alarm, Fire Alarm, CCTV surveillance and is coupled with 2 way audio communication as well. This entire solution is offered to Banks on SaaS model. There is Zero Investment & Zero Management for the Bank, it is offered on an OPEX basis. The Bank needs to pay a nominal usage fee on a monthly basis. Zicom deploys, maintains & monitors the entire system with no hidden costs to the Bank.
Q. How is it different from the existing system? The systems offered earlier were primitive. They were basically limited to CCTV surveillance cameras with DVR for local recording. It used to be stand alone and not networked. These were not connected to a Central Command Center for Remote Monitoring services. Also it entailed CAPEX for the Bank and AMC charges later. These systems were not remotely monitored.
58 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
E-surveillance operates on ip (Internet Protocol) and is connected to Zicom Command Center for 24x7 Remote Monitoring. It comprises of various sensors to protect every asset in the ATM lobby such as ATM machine, Cheque Drop box, Airconditioners, UPS, etc. It includes smoke and heat sensors as well. High resolution, varifocal, IR cameras are installed, both inside and outside the lobby for surveillance. Besides these, 2 way audio systems & hooter are provided to deter the criminal and alert the public in case of any crime or panic situation. The ATM sites are connected to Zicom Command Center and are remotely monitored on a 24x 7 basis. In the event of any alarm generated from ATM, a video verification is conducted to confirm if it is a criminal activity & the 2 way audio is triggered to deter the criminal . In the event the criminal persists, the local hooter is switched ON remotely from Zicom Command Center to alert the public and deter the criminal. Also depending on the emergency, ZCC also alerts to local Police Station or the Fire Brigade, as the case may be. Besides providing security coverage, e-surveillance additionally monitors the status of UPS and AC Power. It can be further extended for Energy Management too In short, e-surveillance is a comprehensive security service customized for 24x7 Remotely Monitored ATM security!
Q. Will the command centre near Mumbai be able help avoid a robbery or any incident inside ATM centre? Since this is an IP based solution, operating on power of internet, a single centrally located Zicom Command Center is good enough to connect & monitor pan India ATMs. The Monitoring Software deployed by
Zicom is state of the art and is versatile and highly scalable as well. It is also user friendly too.
Q. Which are the banks that are using it? Currently, Punjab National Bank, Kotak Mahindra Bank, HDFC Bank, Federal Bank, are using it. Many more banks, both PSU and Private will be availing this e-surveillance services shortly.
Q. Any banks in Karnataka using it or shown interest in it? Yes, some PSU and Private banks in Karnataka are in process of finalizing this service soon.
Q. has it been discussed with the police? If yes, what was there response? Yes, the police are made aware of this innovative e-surveillance service and they are extending their fullest support in promoting this concept to the Banks for both ATM and Branches, as well. Certainly, it aids them in their endeavor to deter crimes in ATMs & ensure security of customers availing ATM services across the nation. Besides, being a deterrent to crime, the video footage in event of any attempt, helps the cops in speeding up their investigations & closing the case faster.
Q. can you explain cost factor that helps banks to consider installing such a system! With implementation of e-surveillance, Banks can save on huge costs currently incurred in deploying 24x7 man guarding the ATMs. Compared to cost of man guarding, e-surveillance is highly economical & ROI is highly appreciated by Banks. Optionally, esurveillance can be complimented with QRT(Quick Response Team) at the field level as first responders to any Emergency situation at the ATM.
www.ind-safety.com
IN FOCUS
“Today Matrix is positioned as a qualitative and competitive product manufacturer on the global planet” range of telecom products; which includes range of IP-PBX (SMB, SME and Enterprises),range of key phones and IP Phones, Converged Exchanges, Universal Gateways, GSM Gateways and VoIP Gateways. These products find applications in: • SOHO, SMB and Enterprise Communication Systems • Housing Complexes • Hospitality PBX • Call Center Switch • Service Provider • Electricity Utilities Mr. Ruchir Talati, Product Manager- Telecom, Matrix Comsec,Vadodara
Q. Could you brief us about overall business activities of Your company (tie-ups, associations, reach, network)? Matrix Comsec is indigenous for all its core business activities like R&D, Manufacturing, Marketing, Sales and Technical Support. All Matrix products are indigenously designed in a dedicated R&D Centre. Matrix markets its products under the brand name of ‘MATRIX” through its 600+ channel partners spread across India and overseas. We work handin-hand with our channel partners and systemintegrators in pre-sales, sales, installation and after-sales process. Today Matrix products are sold not only in India but also in 50 +countries across the globe.
Q. Can you elaborate more about the product portfolio &it’s applications? Matrix range of telecom products meet the varied communication requirements of customers from diverse industries, businesses and institutions. We have comprehensive
60 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
management features for all office communications needs. This multiservice appliance overcomes the complexities of employing separated devices for each function such as Phone system, Data router, Network switches, Wi-Fi access point and Voice Gateways to simplify the communication infrastructure and reduce total cost of ownership. 2. IP-PBX for Large Enterprises (ETERNITY LE)
Matrix range of security solutions include Tim-Attendance Systems, Access Control Systems and Video Surveillance Systems. These solutions are futuristic and specifically designed for large enterprises and multi-location organizations.
Q. Which are the some of your pioneering products you introduced in the market recently or is there any plan to launch the new products? We have launched our two flagship products in the year 2013-2014. 1. Office-in-a-Box Solution (NAVAN CNX) NAVAN CNX is single box solution offering voice, data, internet, mobility and messaging services from a compact and converged platform. Ideal for small businesses and branch offices, it delivers internet access, wireless mobility, firewall, VPN and enterprise-like call
Matrix ETERNITY LE is a powerful enterprise communication solution designed to transcend all technological, organizational and geographical boundaries. This thorough breed solution offers advanced functionality backed by reliability and flexibility that today’s growing enterprises expect from a communication solution. Unlike other IP-PBXs in this range, ETERNITY LE is an energy efficient, compact, single rack solution that eliminates the need of large power stations and stacking multiple cabinets to offer scalability up to 2000 users. Its advanced call capabilities and comprehensive features ensure that the organizations is more responsive, alert and aptly empowered to do more. Continue on page no.62
www.ind-safety.com
IN FOCUS
Continued from page no.60 Q. How do you account R&D activity in your company? India for a long time has enjoyed the reputation as a destination for outsourcing IT and business processes. Now, the country is fast emerging as a major center for cutting-edge research and development (R&D) projects for global multinationals and Indian firms. Matrix is among the few Indian companies which indigenously design, manufactures and markets both Telecom and Security products. With around 40% of the total manpower dedicated to the development of new products, Matrix R&D is the foundation of its growth and sustenance. Today Matrix is positioned as a qualitative and competitive product manufacturer on the global planet and has introduced more than 40 innovative products through continuous research and development activities; strengthening its global competency. This dedicated R&D centre has a great opportunity to extend our product development capability in order to best serve thevibrant and burgeoning Global Electronics markets as well as the target of catering to the need of the international market.Besides the product research, we have a market research team, which dedicatedly works on identifying new products, segments and trends across the globe. They closely interact with our customers and industries to identify future requirements and trends and design products accordingly.
Q. Brief us about the quality policy for your business? We at Matrix are driven by the mission of delivering world-class Telecom and Security solutions to all our customers through continual improvements in technology and processes. We believe it is possible to build world-class products in India for the international markets including the developed countries.
62 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
Q. How do you foresee “India” as a potential market, what are the prospects? The growing Indian economy is a promising business destination. Overall PBX market is moving towards IP Technology. With reference to India, Omni present POTS and GSM would still play a major role in offering connectivity in the length and breadth of India. The requirement sought after, would be Hybrid IP Solutions. The demand for Unified Communication would also grow among enterprises. The traditional PBX market will come down. It is expected that PBX industry will grow from 20 to 25 percent in line with the expected India GDP growth of 10 percent. We are aiming for 30% revenue growth this financialyear. We have specialized solutions to cater the needs of varied domains/ segments, we foresee manufacturing, real estate, hospitality, BFSI, and Government organizations are in our priority list of prospects.
Q. What are your strategies to improve the your company’s position in Indian & global market as well? To begin with, Matrix products are amply differentiated in architecture, functions and features from competition. In marketing and sales, we believe in strong distribution & channel network. We have nearly 600 + channel partners spread across the globe who are busy marketing, selling and supporting Matrix products. Not only in India but our products are available in other countries of Europe, America, Middle-East, Africa, Asia and Australia. Our marketing team works closely with these channel partners to ensure that the products serve the communication and security needs of the customers efficiently, faster and longer. We also have a special customer care cell, which provides prompt assistance to the customers. Finally,
we invest a lot of resources in aftersales support to the end-customers and channel partners ensuring 100% satisfaction to all our customers.
Q. According to you what are the factors affecting to your business? The un-clear regulatory policy for the usage of VoIP Network in India is restricting the expansion of VoIP to a certain extent. The secondary challenges would be from the competition from unorganized players and cheap products from across the border.
Q. What are the key technological trends that are driving the telecom industry? Key Technological Trends: • Need of Enterprise Mobility for Mobile Employees • Mobile Device Diversity and Management • Mobile Apps • Unification of Voice, Video and Data • Multi-location Connectivity • Secure Integration with Branch Office • M2M Communications
Q. What is your vision for your company? Our vision is to build Matrix as a world-class telecom and security solutions and services company operating all over the world.
Q. What are the issues you need to address that are related to your industry? The main challenges would be to address requirement of customized solutions of businesses. The un-clear regulatory policy for the usage of VoIP Network in India is restricting the expansion of VoIP to a certain extent, if addressed would open up new dimensions for telecom industry.
www.ind-safety.com
COVER STORY
Reflectosafe:
Embracing visibility with technology innovation
Mr. Rakshit Damani - Partner & Mr. Lalit Aggarwal - Managing Director, Reflectosafe
64 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
COVER STORY
Q. Please brief us about company’s Indian & global infrastructure? We at Reflectosafe are currently focused on enhancing use of reflective wear in the Indian market which has probably the highest working force in the world. We have an exclusive manufacturing setup for manufacturing hi viz reflective work wear including in-house testing laboratory for testing hi visibility & reflective as per EN471 standards. We design test & manufacture as per International / Indian Standards.
Q. Please also highlight the latest initiatives in your industry domain? With help of presentation & product development we have added new sectors to buy high visibility & enhance safety of their workers. We have helped Indian Standards to frame IS15809 standards for hi viz garments.
Q. What are the market opportunities for your company’s products in India? India is poised to grow at the rate never seen before, with increasing projects, the complexities at work
sites will increase, therefore need for visibility at site will become necessary. We have constantly worked on creating awareness in various sectors & therefore created opportunity for us & will do so in future. “As the awareness will grow, so will the opportunity”.
Q. What is future prospect for your industry? Future prospects for high visibility in India is very “BRIGHT”, however role of safety councils and organizations are vital. The user in India are not aware of safety standards in high visibility arena. Reflective vest should be made mandatory where the workers are exposed to vehicular accident.
Q. Is there any plans for expansion & new investment in terms of product development or new technology adoption to cater the demand of the industry? In the last two years we have launched new products in our high visibility range & have added & as we speak are adding facilities for the same.
Q. What is the top line product range & Is there any plans to launch new products? We and 3M have collaborated to manufacture certified reflective wear for the industry using their “Scotchlite Range”. These products are designed to make certified vests available at an affordable price.
New Products are : a. Bag belt : Reflective belts for bags suitable for bikers. b. Waist belt : Reflective belts suitable for night use like security guards etc. c. T-Shirts : Hi viz T-shirts with reflectives for executives and promotions etc.
Q. What is your vision for your company? The “Team” is committed to improve “Visibility” conditions throughout India & to establish a strong foothold by offering innovative solutions in the most ethical way.
www.ind-safety.com
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
65
IN FOCUS
“ There is immense growth in the industry as with growing technology ”
Q. In your opinion, what is the state of security industry in India and what is the trend you see in the space?
has caught eye of the industry that
India currently has approximately
long time support.
is information security. We provide advisory consultation and imple-
Q. What is your support strategy?
mentation on Enterprise Compli-
This is one of the features where our
ance Management, Managed Secu-
company holds an edge over our
5.5 million security guards employed
rity Services and LAN Management,
competitors. We not only supply and
by about 15,000 security companies;
Cabling etc.
deliver superior quality product and
as an industry, this sector is now the
services but also provide on-going support and maintenance to our
as a full-blown security industry
Q. What is the advantage of Matrix products vis-à-vis the competition?
which is growing steadily year after
Matrix
year and is likely to grow steadily.
Substance is in the DNA of Matrix
Q. What are the challenges that you are currently facing in India?
solutions. Substance in the form
There
of technology, depth, genuineness
like cultural conflict, integrating
country’s largest corporate taxpayer. Security finds a place in the country
Q. Which targeting?
market
are
you
is
SUBSTANCE
brand.
customers.
are
various
challenges
and going beyond the mere outer
technology but the main hurdle
We have an established foothold in
façade and offer more values in all
is
the area of physical security that is
the areas.
between physical security managers
CCTV installation, bomb detectors
This
is
the
understanding
differentiates
& information security consultants.
etc. Recently we have started a new
Matrix from the lot. Matrix solutions
But the best way to support the
division in our organization which
are
More
business is to understand core
applications,
competencies and put the best team
packed
productivity,
what
managing
with more
More.
more flexibility, more functions,
together to accomplish the mission.
more features, more cost saving,
values which customers expect from
Q. How much of growth are you expecting this year and are you also expecting any business from the overseas market?
infrastructure solutions.
As I have mentioned earlier, there is
more reliability, and more support. Matrix positioning is based on offering more of these true inherent
immense growth in this industry as
Mr. Firoze Zia Hussain, CEO, Totem International Pvt. Ltd., Hyderabad
66 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
Q. What is your marketing and channel strategy?
with growing technology the threats
Our latest marketing strategy is
We are already doing business
trying to be niche in the market.
with organizations abroad but yes
We will be partnering with various
we expect a steep increase in the
vendors in India and abroad to
coming year as we have brought
provide our customers out of the
some
league services and products with
strategy.
and risks to our assets is increasing.
concrete
changes
in
our
www.ind-safety.com
SAFETY INDUSTRY
TECH UPDATE
India’s Industrial Safety Case
I
About the Author:
Venkatesan Narayanaswamy is a chemical engineer with post graduate specialisation in industrial pollution prevention and control and environmental management and policy. Venkatesan has over 20 years of professional experience across industries, government and academia both in India, Europe, and Australia. Venkatesan is at present working for the Department of Mines and Petroleum - DMP (Government of Western Australia) as a Senior Inspector of Petroleum and Major Hazard facilities. The DMP is a State regulatory agency in Australia that enforces and monitors safety cases for chemical and petroleum industries.
ndia needs a safety case regulatory regime to govern its major hazard industries. The safety case regulatory regime has been proven to be the most viable system to provide effective regulatory enforcement & monitoring through collaborative partnership with industries to prevent occurrence of major incidents. There are over 1900 Major Accident Hazard (MAH) control units or facilities in India [1]. There are also several million of registered hazardous factories, below MAH criteria. There are numerous factories
in unorganised sectors [2] storing and handling hazardous chemicals posing serious and complex risks to people, property and the environment. Major chemical and petrochemical disasters, with multiple fatalities, have occurred almost every year since the 1984 Bhopal gas leak disaster (see Table 1 [1], [2]) In addition to the loss of lives, these disasters have eroded the manufactured, human and natural capital base of the Indian economy. Flow-on, adverse impacts to the banking and finance sector are also
Table 1 Chemical Incidents in India since 1984 Bhopal Gas Leak Location
Year
Incident
Chemical Involved
No of Fatalities
No of Injuries
No Evacuated
Vishakapatnam
2013
Refinery Explosion
Hydrocarbons
Mumbai
2010
Release
Chlorine
27
7
Unknown
Unknown
70
Jaipur
2009
Fire
Oil
120
12
>200
1000000
Nagothane
2008
Explosion
Renukoot Sonebhadra
2006
Release
Hydrocarbons
4
49
>200
Chlorine
6
29
Unknown
Hyderabad
2005
Explosion
Hydrocarbons
Cochin
2004
Fire
Toluene
2
2
Unknown
Unknown
Unknown
Mohali
2003
Fire
Unknown
4
25
Unknown 150
Vellore
2003
Explosion
Explosives
25
3
Unknown
Vadodara
2002
Explosion
Chlorine gas
2
18
>100
Mumbai
2001
Release
Toxic fumes
Unknown
5
Unknown
Paradip
2000
Fire
Hydrocarbons
6
>12
Unknown
Panipat
1999
Refinery Fire
Hydrocarbons
5
2
Unknown
Calcutta
1998
Fire
Hydrocarbons
5
>100
Unknown
Vishakapatnam
1997
Refinery Fire
LPG
60
31
150000
Dhanbad
1996
Gas, Rain
Mine collapse
64
Unknown
Unknown
Mumbai
1995
Poisonous Gas
Unknown
2
Unknown
Unknown
Asanol
1994
Fire
Methane
53
Unknown
Unknown
Calcutta
1991
Pipeline leak
Chlorine
Unknown
200
Unknown
Nagothane
1990
Leakage
Ethane & Propane
32
22
Unknown
Bhatinda
1989
Leak
Ammonia
Unknown
500
Unknown
Bombay
1988
Refinery Fire
Oil
35
16
Unknown
New Delhi
1985
Release
Sulphuric Acid
1
340
>10
Cochin
1985
Release
Hexacyclopentadiene
Unknown
200
Unknown
Sources: Compiled from Ref [1] and [2] and from Newspaper clippings from Hindustan Times, the Times of India, & the Hindu.
68 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
SECURITY INDUSTRY SAFETY INDUSTRY
TECH UPDATE
For example, insurers
Analysis of disasters almost always
and underwriters can potentially
show a combination of technical and
become insolvent if disasters of the
managerial flaws which have led to
scale of the Bhopal gas leak were to
the event occurring.
significant.
Appropriate
occur.
• pressures regulator to hold the occupiers accountable • shifts
from
‘command performance
a and
prescriptive control’
to
performance based ‘negotiated compliance’ model
To foster process safety, India
standards must be defined for the
needs to re-engineer its process
operation of the safety critical as-
• forces the regulator to engage
safety governance. The re-engineered
pects. A ‘performance standard’ is a
with the occupiers on an ongoing
safety governance constitutes:
standard, established by the opera-
and continual basis • improves
administrative
and
and
tor, of the performance required of
monitoring reform by introducing
a system, item of equipment, person
enforcement
a safety case regulatory and
or procedure which is used as a ba-
effectiveness
enforcement operations within
sis for managing the risk of a major
• increases economic efficiency
the inspectorate of factories;
accident event.The workforce must
• ensures industrial and public
1. radical
enforcement
2. organisational development and indigenous
capacity
building
be involved. Workforce involve-
efficiency
and
safety effectiveness
ment is necessary so they know what
• achieves uniformity and consis-
happens in practice and why. This
tency in regulatory expectations
performance
makes it more likely that they do the
and enforcement across the states
monitoring of MAH control units
right thing because they know why,
within the inspectorates; and 3. On-going
safety
rather than relying on a ‘rules-based’
to prevent major accidents.
and the union territories • achieves
drastic
reduction
in
number and frequency of indus-
culture.
What is a Safety Case and how is it different to current regulatory and enforcement system?
the knowledge that it will be scru-
A safety case is a document produced
pendent regulator. Competent and
by the operator of a facility which:
relevant Indian regulatory authority
Regulatory Reform
• Identifies the hazards and risks
must assess safety cases and ‘accept’
India
• Describes
a safety case if it is satisfied that the
implement a comprehensive safety
how
the
risks
are
The safety case is produced in tinised by a competent and inde-
trial accidents • achieves
continuous
improve-
ment towards zero harm
should
formulate
and
arrangements set out in the docu-
case legislative framework. This is
• Describes the safety management
ment demonstrate that the risks will
the first, and foremost, step towards
system in place to ensure the
be reduced to As Low As Reasonably
a performance based governance
controls
Practicable (ALARP). Following this
approach
‘accepted’ safety case, the compe-
safety outcomes for the industry and
tent authority will conduct audits
the community.
controlled
are
effectively
and
consistently applied.
that
ensures
positive
Safety cases must be produced by
and inspections in relation to facili-
the operator of an installation. The
ties to monitor and enforce the oper-
Following are Acts and Rules that
principle here is that those who
ator’s application of the safety cases
have been developed over a period
create the risk must manage it. It
in practice.
of time to regulate MAH control units:
is the operators’ job to assess their processes, procedures and systems
The safety case regulatory regime, if
to identify and evaluate risks and
effectively enforced:
implement the appropriate controls,
• puts the onus squarely on the
because
the
operator
has
the
greatest in-depth knowledge of their
1987
facilities or occupiers
The safety case must identify the
• emphasises performance based • provides
degrees
freedom
for the occupiers to achieve
both
compliance
www.ind-safety.com
and
managerial.
Major
Accident
Hazard
• Environment Protection Act 1986 • Manufacture, Storage and Import
of
safety critical aspects of the facility, technical
• The
Control Rules 1997
safety outcomes
installation.
• Factories Act 1948 amended in
of Hazardous Chemical Rules, 1989, amended in 1990 and 1994 • The
Chemical
Accidents
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
69
SAFETY INDUSTRY
TECH UPDATE
(Emergency Planning, Prepared-
and develop a self-contained and
facility risks against these criteria as
ness and Response) Rules, 1996
an integrated legislative framework
part of their safety case assessment.
safety
The Indian safety regulatory
performance outcomes. There is
system should drive public consensus
a need to bring together the best
and best practice to establishing
elements from these diverse set of
the risk criteria across States and
Acts and Rules to develop a cohesive
Union Territories. Demonstration of
Besides these, there are standards
safety case regulatory framework that
ALARP/SFAIRP, by the MAH control
of performance set and periodically
covers the chemical, petrochemical
units, should become absolutely
revised
and the oil and gas industry.
critical in earning, and retaining,
• The
National
Disaster
Management Act 2005 • The Public Liability Insurance Act, 1991 amended in 1992
by
Oil
Industry
Safety
to
petroleum
exploration,
drilling and processing facilities. With an overall objective of ensuring safety and security of public and property from fire and explosion, Petroleum and Explosives Safety Organisation (PESO) as a statutory authority is entrusted with the administration of Explosives Act, 1884, Petroleum Act, 1934; Inflammable Substances Act, 1952 and the following Rules framed under these Acts; Explosives Act, 1884: 1. Explosives Rules, 2008 2. Gas Cylinder Rules, 2004 3. Static & Mobile Pressure Vessels (Unfired) Rules, 1981 4. Notification No. GSR 625(E) dated 07.08.1983 regarding Acetylene Generation Petroleum Act, 1934: 1. Petroleum Rules, 2002 2. Calcium Carbide Rules, 1987 3. Cinematography Film Rules, 1948
and
monitor
At present, more impetus is
their social licence to operate. The
being given to on-site and off-site
MAH control rules must define what
emergency planning, preparedness
constitute a SMS & demonstrate how
and response. Little or no emphasis
key requirements of SMS are being
is being put on hazard prevention
met. There is no need to reinvent
and control. Prevention and control
the wheel here.
of
Directorate (OISD) for on-shore and off-shore
enforce
industrial
hazards
India can adapt
deserves
and advance good examples from
equal emphasis to learn and to take
the Occupational Safety and Health
improvement actions continuously
Administration (OSHA), the Centre
from near misses in order to prevent
for Chemical Process Safety (CCPS),
major accidents from occurring.
and the Health and Safety Executive
Hazard mitigative measures are
(HSE), of the United Kingdom.
often complementary to hazard prevention
efforts.
Implementing the above re-
However,
forms and measures will be critical
mitigation is costlier and prevention
to achieving process safety excel-
is cheaper in the long term.
lence in Indian MAH control units.
The Major Accident Hazard
Process safety excellence is a key
Control Rules 1997 (the MAH Rules)
differentiator to gaining competi-
do not explicitly consider Safety
tive advantage in global markets, as
Management Systems (SMS), whilst
it can lead to consistently high qual-
major accidents that have been
ity and reliable supplies. It can also
occurring invariably point towards
restore public confidence in safety
systemic failures at the facilities.
governance and can encourage col-
Neither the current regulation nor
laboration and partnership with lo-
the industry codes of practice provide
cal communities on industrial and
sufficient clarity on risk tolerance
spatial safety planning, and in the
criteria for individual on-site and off-
safety case approval processes.
site, and for cumulative and societal Jurisdictional clarity and regulatory
The MAH Rules prescribe a
risks. There is no mention of the
and
three yearly cycle for continuous
and
So Far As Is Reasonably Practicable
improvement and mandatory review
responsibilities should be clearly
(SFAIRP) or the As Low as Reasonably
of the Safety Report. However,
defined between state and federal
Practicable (ALARP) concept in the
should a major incident occur at the
agencies for on-shore and off-shore
MAH control rules. It is absolutely
MAH unit, or should there be a major
MAH facilities.
essential that MAH control units
industrial accident, the safety report
should
and
should immediately be reviewed
principles
cumulative risk tolerance criteria
and reassessed. For example, post
Acts
and
for on-site and off-site fatality and
Rules relevant to MAH control units,
serious injuries, and evaluate the
Buncefield, and post the BP Texas Continue on page no.72
the
enforcement
India
should
intent
and
underpinning
70 |
roles
the
various
consolidate
JULY 2014 | INDUSTRIAL SAFETY REVIEW
define
individual
www.ind-safety.com
INDUSTRIAL SAFETY REVIEW
71
JULY 2014
SAFETY INDUSTRY
TECH UPDATE
Continued from page no.70
Increasingly, this capability must be internalised within the inspectorate to ensure independence and to avoid potential business bias and rent seeking. External expertise can still be made available to the industry as support services. Investigative
and
technical
rigour should be enhanced in the inspections that are being undertaken by the inspectorate. There should be a National Capacity Building program for the inspectors in Process Safety, Incident Investigation, and Auditing and Inspections. Universities and professional institutions should contribute to the long term skill development of the inspectorates. Inspectors should be trained Refinery incidents, the tank terminals and refineries in India should have reviewed their Safety Report and provided assurance to their regulator that sufficient control measures have been in place to prevent those types of incidents from occurring. All MAH units should review their safety management systems, and risk assessment, as soon as practicable after an occurrence of an industrial and site hazardous incident (regardless of its potential to cause a major accident). The outcomes of such reviews and any renewed assurances should be notified to the regulator. A decision framework below provides how this could be accomplished by adding a provision of review of risk assessment and SMS following a hazardous incident to the existing MAH Rules.
Safety Audits and Inspections At present, the safety audits are primarily focused on Occupational Safety and Health issues and lack sufficient technical rigour. The audit scope and methodology should be
72 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
expanded to include auditing of major incident event scenarios and controls identified and assessed for each scenario. The audits should seek evidence on performance assurance of safety controls. The performance criteria are functionality, availability, reliability, effectiveness, independence, survivability, auditability, maintainability, etc. IS 14489:1998 (Code of Practice on Occupational Safety and Health Audit) should be reviewed and rewritten to include core elements of process safety. This standard should be revised to provide more focus on auditing Independent Protection Layers (IPLs) or safety control barriers, for eliminating, preventing, reducing and mitigating the potential major accidents. The audit standard should cross refer relevant approved codes of practices and standards under the MAH Rules.
and assessed in both soft and hardtechnical skills. Stakeholder engagement and communication,
conflict
resolu-
tion and management, negotiation, managing change, effective leadership and team work, coaching and mentoring,
actionable
advocacy,
and influencing willing compliance, are some of the areas in which the inspectors should be periodically trained and assessed. The Directorate General, Factory Advisory Service & Labour Institutes
(DGFASLI)
should
be
strengthened and effectively utilised for developing professional capabilities within the inspectorates.
The
Centre for Chemical Process Safety (CCPS), the Institution of Chemical Engineers (IChemE-UK), the International Labour Institute (ILI), and other international institutions should be invited to participate and contribute alongside Indian institu-
Capacity Building
tions to facilitate cross-pollination
At present, safety audits are being conducted either by consultants or by safety auditing cell experts.
of technical knowhow and transfer of skills and expertise. Unless Continue on page no.74
www.ind-safety.com
SAFETY INDUSTRY
TECH UPDATE
Continued from page no.72 the enforcement arm, enforcement quality and enforcement rigour of the inspectorates are strengthened, safety case regulatory regime cannot by itself lead to effective safety outcomes.
Resourcing and Performance Assessment Many countries have successfully implemented a ‘fee-for-service’ model recovering the labour and total overhead costs of delivery of regulatory services. The full cost recovery model provides more accountability to safety case governance structure and ensures greater economic and administrative efficiency and transparency for the regulatory and enforcement services delivered. In countries where safety case regimes are in place, the cost of direct labour and other overheads for delivering the regulatory services are being recovered through MAH unit licencing and annual fees. In return, the regulator undertakes an annual safety audit and two six monthly safety performance review inspections. Three times a year point of contact and direct interaction with MAH units provides the inspectors with opportunities to engage with the units more pro-actively to monitor progress in safety performance. Through this approach, the inspectorate is also expected to demonstrate ‘value-for-money’ and add value to the MAH units in the audits and inspections. The inspectors’ performance should be assessed by defining and monitoring Key Performance Indicators (KPIs) in professional and interpersonal skills, and continuous learning and professional development activities. The individual and team performance must be assessed by the
74 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
senior management panel biannu-
capacities within the inspectorate.
ally to ensure quality, quantity and
The model proposed in this
timeliness outcomes in delivering
article is time tested, borne out
regulatory and enforcement services
of experience, and has helped the
are achieved. Individual performance
developed and emerging economies
of the inspectors should be tied to
reduce the number and severity of
their remuneration and this should
industrial accidents.
encompass the whole organisational
positioned
structure right from the Chief In-
safety case governance given her
spector to a graduate field inspector.
institutional strengths and stronger
The inspectors should demonstrate
skills base in public and private sector.
that these KPIs are being achieved
India should seize this opportunity
by providing hard evidence during
to demonstrate a world-class safety
each assessment period. Biannual
governance and regulatory system
performance assessment should be
to its rivals. Superior performance
conducted for the inspectors to en-
in process safety in the MAH control
sure planned service and organisa-
units and in the inspectorate will be
tional outcomes are met. Feedback
amply rewarded by greater direct
on individual and team performance
foreign and domestic investments
of the inspectors should be sought
in
from the MAH units and other stake-
petrochemical processing and in the
holders to identify and implement
oil and gas sector.
areas of continuous improvement.
to
India is best
achieve
advanced
effective
chemical
and
The rolling out of safety reform on this scale for a vast geographical
Conclusions
and demographic coverage is un-
Current accident fatality numbers
doubtedly a massive task for India.
are clearly not acceptable, if India
This could be implemented through
wants to become a global leader in
pilot runs of this reform on a smaller
this sector. By implementing a safety
scale, in industrially advanced states
case regulatory and enforcement
and union territories and then dis-
regime, the inspectorate’s efforts
seminating the success gained to
will be focused to keep the occupiers
garner support from industry and
honest. Ultimately, the occupiers are
institutions nationwide.
responsible and accountable for safe operation of their facilities.
References
The intent of this article is to
[1] Anil K Gupta and Sreeja S Nair,
acknowledge that ongoing efforts by
2012. Chemical (Industrial) Disaster
the inspectorates and institutions
Management,
nationwide are laudable but have
National
not been proven to be sufficient and
Management, First Edition, 2012,
effective to prevent the number of
Pages 15 of 158.
fatalities and the severity of damage
[2] Prajapati R P, 2013. Industrial
to property and the environment.
Disaster and Disaster Risk Reduction,
To achieve drastic reductions in the
Journal of Environmental Science,
frequency and number of major
Computer Science and Engineering
accidents, India should reform its
and Technology, Volume 2, Number
current safety regulatory structure
4, September -November 2013, pages
and practices and build professional
1099-1103.
Training
Institute
of
Module, Disaster
www.ind-safety.com
FIRE INDUSTRY
TECH UPDATE
Wireless
Gas Detection with
Crowcon’s Detective Net
Wireless module works with Crowcon’s Detective+ transportable gas detectors.
T
he Detective+ is a free-standing, transportable multigas monitor that can be used individually or in groups to monitor up to four gases at once. By using the Detective Net module, up to 25 Detective+ units can be linked wirelessly and positioned as much as 100 metres apart. Should wireless connection between two of the detectors weaken, the RICOCHET® wireless network will ‘self-heal’ and automatically reroute communications via alternative devices. This creates a ‘mesh’ type network, ensuring greater reliability in safety-critical situations. Over a dozen gas sensor options are available with the Detective+, including infrared sensors for flammable gas that are immune to the poisoning effects which plague standard flammable gas sensors. If a dangerous gas level is detected, the Detective+ unit warns with a wailing
76 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
104 dBA siren and flashing, high intensity LED beacons which are visible from all angles. A signal is also sent to all the other units, alerting workers to the danger. In addition Detective Net transmits other fault information such as loss of signal or low battery power. If the signal is very weak, for example because of thick metal bulkheads, Detective Net can act as a repeater to boost the signal between units. A cable can even be used to extend the reach of an individual Detective+ unit and put it in a position with a stronger wireless signal – this is especially useful in cramped, confined spaces. The Detective+ is indeed ideal for confined spaces, ensuring safe gas levels before workers enter and monitoring continuously during welding and other repair work. With 60 hours of battery
operation, work can go on with a minimum of detector recharging, keeping shutdown time as short as possible. In commissioning new liquefied natural gas (LNG) plants, the Detective+ can be placed along the pipelines to check for leaks, minimising explosion risks. The rugged tripod construction and raised profile keeps the Detective+ sensors away from obstructions and surface water. An integral safety cage gives extra protection in the event of the unit being overturned in chaotic work areas. An operating temperature range of -20°C to +40°C assures reliable detection in a variety of environments. The units are Class 1 Division1Groups A, B, C, and D approved. Optional folding legs facilitate compact storage and transportation. For more information, Website: www.crowcon.com
www.ind-safety.com
PROJECT UPDATE Latest Project updates for Fire Safety & Electronic Security Vendors
PROJECT INDEX Sr. No.
Project Category
Pg.No.
1.
AIRPORT
78
2.
CONSTRUCTION
78
3.
HEALTHCARE
79
4.
HOSPITALITY
80
5.
HOUSING
80
6.
PORT & SHIPPING
81
7.
RAILWAYS
82
8.
ROADS / HIGHWAYS / BRIDGES
82
9.
SPORTS INFRASTRUCTURE
84
A new initiative by INDUSTRIAL SAFETY REVIEW A professional magazine for people in profession
PROJECT UPDATE
AIRPORT
A
ndal airport is coming up in Durgapur Industrial belt in Burdwan District. Around 95 per cent of the airport work is completed, the issue of shifting the high-tension power transmission line is sorted out. This project is likely to take off around September-October 2014. The airport authorities are in talks with Pinnacle Air, Spirit Airlines and North-East Shuttles. Location: Burdwan District West Bengal Budget: 10000 Crore Bengal Aerotropolis Projects Ltd (BAPL) Kaushik Banerjee, Vice President - Projects, Block A, 8th Floor, ApeejayBusiness Centre, 15 Park Street, Kolkata - 700016. T: 033-40201756, 39845270 / 71, F: 22891660, kaushik@bengalaero.com (Partha Ghosh, MD)
A
CONSTRUCTION
P
lans to undertake construction of court bhavan building at Biharsharif, Nalanda. Location: Nalanda Bihar Bihar Building Construction Department Ashok Kumar Suman, BAS, OSD, Building Construction Dept. Nalanda Building Division, Biharsharif, Bihar. M: 9431478539, E.: ashokkrsumangmail.com
K
erala’s women self-help group Kudumbashree plans to foray into the construction sector by forming ‘Kudumbashree Constructions’. The group plans to build a model tribal village at Edakkattuvayal in Ernakulam district. Location: Wayanad District Kerala
AI is contemplating plans to build a much larger airport near Shimla. The preliminary report submitted by AAI’s team of engineers has opined that it is feasible based on the survey conducted at the proposed site near Kiari Bungalow on the Shimla-Kalka highway. Location : Shimla Himachal Pradesh Airport Authority of India (AAI) Bakhshish Singh Jauhal, Regional Executive Director, Northern Region, Operational Offices Complex Rangpuri, New Delhi -110037. T: 011-25652343, 25654212, F : 25656451, Email: red_nr@aai.aero (V P Agarwal,Chairman)
78 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
Kudumba shree Manjula Bharati, C2nd Floor, TRIDA Rehabilitation Building, Chalakuzhy Road, Medical College PO., Thiruvananthapuram -695011, Kerala, T: 471-2554714, 2554715, F: 2334317, E.: info@kudumbashree.org (K B Valsala Kumari, Executive Director)
P
lans development of Agasti Rushi Deosthan Akole. The project include construction main building and toilet block. Location: Ahmednagar District Maharashtra
www.ind-safety.com
PROJECT UPDATE
Govt of Maharashtra, Public Work Department P V Naik, Deputy Engineer, PWD Sub Division, No. 1, Akole, Dist- Ahmednagar, Maharashtra. M: 9422943800
P
lans to construct Rajarshi Chhatrapati Shahu Memorial on 27-acre land at Shahu Mill. The Maharashtra Government has sanctioned Rs 3.5 crore in this regard. The civic body has appointed Pune-based firm Designs Consultants Architect Private Ltd to prepare a detailed project report. Location: Kolhapur Maharashtra Budget: 117 Crore
Unity Infraprojects Ltd Vinay Digikar, Manager-Corp Comm, 1252, Pushpanjali, Apartments, Old Prabhadevi Road Prabhadevi, Mumbai-400025. T: 022-66665500, F: 66665599, E: vinayd@unityinfra.com
T
he buildings & factories business division of L&T has bagged an order from West Bengal Housing Infrastructure Development Corporation for construction of a convention centre at New Town, Kolkata. Location: Kolkata West Bengal Larsen and Toubro (L&T) Dip Kishore Sen, Senior Vice President & Head - Transportation Infrastructure, L&T House, 2nd Floor, Ballard, Estate, Mumbai-400001, T: 022-67525656 / 836, F: 67525796. (A M Naik, CMD)
Kolhapur Municipal Corporation (KMC) Gauri Chorage, Project co-ordinator Main Building, Shivaji Chowk, C-Ward, Kolhapur - 416002, Maharashtra. T: 0231-2540291 to 99, F: 2541830, (Vijayalakshmi Prasanna Bidari, Commissioner)
B
agged construction of 1000 rooms (2000 seats) Boys Hostel (G+10) for ISM at Dhanbad i/c Internal water supply, sanitary installation, drainage & civil development work, internal electrical installations, fans & fittings, fire alarm system, fire fighting system and passenger lifts by CPWD, Dhanbad. The completion is targeted in 26 months. Location: Dhanbad Jharkhand Budget: 116.11 Crore Unity Infraprojects Ltd Vinay Digikar, Manager-Corp Comm, 1252, Pushpanjali, Apartments, Old Prabhadevi Road Prabhadevi, Mumbai-400025. T: 022-66665500, F: 66665599, E: vinayd@unityinfra.com, (Kishore A Avarsekar, CMD)
B
agged construction of Karwar Institute of Medical Sciences at Karwar by Public Works, Ports and Inland Water Transport Department Division. The completion is targeted in 24 months. Location: Karwar Karnataka Budget: 141 Crore
www.ind-safety.com
HEALTHCARE
P
lans construction of 30 bedded maternity wings at community centre located at Rudrapur, Devaria in the state of Uttar Pradesh Location: Rudrapur Uttar Pradesh Budget: 2.08 Crore Uttar Pradesh Projects Corp Ltd A K Singh, General Manager, Zone-3, Devkali, Faizabad. Camp Office, Left Bank, Gomti Barrage, Gomati Nagar, Lucknow, T: 09454419131
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
79
PROJECT UPDATE
P
lans construction of 30 bedded maternity wings at community centre located at Bheeti, Ambedkarnagar in the state of Uttar Pradesh. Location: Ambedkar nagar Uttar Pradesh Budget: 2.25 Crore Uttar Pradesh Projects Corp Ltd A K Singh, General Manager, Zone-3, Devkali, Faizabad. Camp Office, Left Bank, Gomti Barrage, Gomati Nagar, Lucknow, T: 09454419131
T
he hospital group plans to build three new hospitals with a total bed capacity of 800. The group has got 50 hospitals with a total bed capacity of 8,617 beds as on March 31, 2014. The hospitals will come up at along the Vijayawada- Guntur road, Visakhapatnam and another in Nellore. Location: Nellore Andhra Pradesh
Location: Vijayawada Andhra Pradesh Budget: 200 Crore Varun Group Purna Chandra, GM (Construction), #1-10-177, Begumpet, Hyderabad, T: 040-27767676, M: 9885227711 (V Prabhu Kishore, Group Chairman)
T
he Group is setting up resort-cumservice apartments with 30 luxury rooms at Bhimili beach in Vizag. This property is likely to be operationalise in two to three months. Location: Visakhapatnam Andhra Pradesh Budget: 15 Crore Varun Group Purna Chandra, GM (Construction) #1-10-177, Begumpet, Hyderabad, T: 040-27767676, M: 9885227711 (V Prabhu Kishore, Group Chairman)
Apollo Group of Hospitals Anuruba KGN, Assistant Manager (Media & Communications), Near IIMB, Bannerghatta Road, Bangalore- 560076, Karnataka. T: 080-40304050, E: anuruba_k@apollohospitals.com (Sangita Reddy, Executive Director(Operations))
HOUSING
P
lans construction of 230 nos EWS houses under Gitanjali Housing Scheme at Nanoor Panchayat Samity in the district of Birbhum. Location: Birbhum West Bengal
HOSPITALITY
T
he Group plans to come up with a 5-star hotel with 200 rooms in Vijayawada. The project approvals are in place. The construction is likely to start by September 2014 and completion is targeted by 2018.
80 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
West Bengal Directorate Of Fisheries Sujit Chakraborty, Project Manager, Meen bhaban, Birbhum-731101, West Bengal, T: 03462-255419, E: adfbirbhum@gmail.com
www.ind-safety.com
PROJECT UPDATE
M
HADA had started construction of the first building on a vacant plot in Dharavi last year. MHADA is unable to complete the work of the first building due to a height cap by the aviation ministry. Due to this the work on the second building could not start. MHADA is the special planning authority for Dharavi’s Sector 5. Location: Mumbai Maharashtra Maharashtra Housing and Area Development Authority (MHADA) Vaishali Sandansingh, Chief Public Relations Officer, Room No. 318, 2nd Floor PPD, Mumbai Board, Griha Nirman Bhavan, Kalanagar, Bandra East Mumbai-51 Maharashtra. T: 022-66405077, 26590911, M: 9920346667
Andhra Pradesh. T: 0891-2871332, 2871327, E: nsrprasad@dci.gov.in (D.K. Mohanty, CMD)
P
lans to expand its cargo handling capacity. It intends to increase the draught of the port to 18 m from the present 14 m. This is to enable the port to handle larger vessels mainly related to petroleum and oil products. Location: Mangalore Karnataka New Mangalore Port Trust (NMPT) Shashidhar Koppad, Executive Engineer (Civil), Panambur, Mangalore-575010, D.K. District, Karnataka. T: 0824-2407341, F: 2408390, M: 09448344541, E: shashidhar.koppad@rediffmail.com (P C Parida, Chairman)
T
he port has proposed to the private sector to set up hybrid cargo terminals — captive-cum-common user facility. The investing partner can decide on the ratio of captive and third party cargo at 60:40 or 70:30. But the minimum throughput needs to be guaranteed. Location: Paradip Odisha Paradip Port Trust A K Jain, Chief Engineer, Administrative Bldg, Paradip Port - 754241, T: 06722-222026
PORT & SHIPPING
D
CI and Dharti Dredging and Infrastructure Ltd had jointly submitted bids for the dredging contract in the northern arm of the Visakhapatnam port. It is likely that the work order will be issued to these companies soon. The project is targeted to complete in six months. On completion it would enable the arrival of Panamax vessels. This project is part of the last phase of dredging in the inner harbour of Visakhapatnam port. Location: Visakhapatnam Andhra Pradesh Budget: 32 Crore Dredging Corporation of India Ltd (DCI) NSR Prasad, DGM, Marketing, Dredge House, Port Area, Visakhapatnam,
www.ind-safety.com
P
lans development of new iron ore berth for handling of iron ore exports at Paradip port located in Jagatsinghpur district of Odisha on build, operate and transfer bot basis. Location: Paradip Odisha Budget: 650 Crore Paradip Port Trust A K Jain, Chief Engineer, Paradip- 754142, Orissa. T: 06722-222062, 222242, E: ceppt@paradipport.gov.in
P
lans to appoint technical advisor for carrying out techno-commercial feasibility studies for development of berthing facilities off Tekra near Tuna at
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
81
PROJECT UPDATE
Kandla port on BOT basis. Location: Kandla Gujarat Kandla Port Trust R.Murugadoss, Chief Engineer, P.O. Box 50, Administrative Building, Gandhidham, Kutch, Gujarat. T: 02836- 233192, F: 220050, E: ce@kandlaport.com
Sambalpur, Sambalpur- Titlagarh-Raipur, JakhapuraKeonjhar- Banasapani and Cuttack-Barang-Rajatgarh sections. The Odisha government has also demanded wagon factory at Ganjam, doubling of Khurda Road-Puri line. Location: Khurda Odisha Indian Railways Anil Saxena, Director General-Public Relations, Railway Board, Delhi, T: 011-23381332, E: dpr.rly@gmail.com.
D
ighi Port is hopeful of commissioning the second berth by October 2014. The Dighi Port project envisages development of five berths in the first phase by next December. The first phase is estimated to cost Rs 2,500 crore. So far the company has raised Rs 1,300 crore debt till date. The second phase is likely to complete by 2020. The port will have a capacity of 70 MT with 15 berths by 2020. Location: Raigad District Maharashtra Budget: 2500 Crore Balaji Infra Projects Ltd Ratan Maheshwari, General ManagerProjects, 6th floor, New Excelsior Bldg, Fort, Raigad District - 400001, Maharashtra, T: 022-22074824 / 25, F: 22072124, E: ratan_maheshwari@balaji.co.in.
T
he company has been declared the successful bidder (L1) for the following project/work by Rail Vikas Nigam Ltd. The works include Package- 2 proposed new BG line between Obluvaripalle and Venkatachalam Execution of earthwork in formation, bridges, road under bridges, station buildings, staff quarters, general electrical works including power line crossings Budget: 178.99 Crore Sadbhav Engineering Ltd Rahuldeep Mittal, DGM, 602/702, C Wing, Godrej Coliseum, B/h Everard Nagar, Sion (East), Mumbai – 400022, T: 022-24095887, F: 24096883, M: 09619798296, (Vishnubhai M Patel, MD)
RAILWAYS ROADS / HIGHWAYS / BRIDGES
T
he railway ministry has stressed on completion of all five projects approved between 1994-95 and 201011. The projects include Khurda Road - Bolangir project, doubling of saturated railway lines such as Talcher-
82 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
NHAI has approved four laning of 96-km-long KaithalAmbala National Highway in Haryana. As of now, the Kaithal-Karnal Road in Kaithal City has been six-laned
www.ind-safety.com
PROJECT UPDATE
P
upto Pehowa Chowk at a project cost of more than Rs 12.40 crore. Location: Kaithal Haryana Budget: 724 Crore
lans improvement to Singhpur Kandia road from 0.0 km to 9.500 km at Jajpur. Completion period: 12 months. Location: Jajpur Odisha
National Highways Authority of India (NHAI) M.K Jain, General Manager, G-5 & 6, Sector-10, Kaithal - 110075 , Delhi, T: 011-25074100-1449, F: 250741100, 200, E: mkjain@nhai.org
Odisha Bridge and Construction Corporation Ltd Setu Bhavan, Nayapalli, Bhubaneswar,Odisha. T: 0674-2390043, F: 2396326. E: mdobcc@gmail.com (Subhandu Kumar Rai, CMD)
P
lans to undertake four laning of UP/ Haryana borderYamunanagar-Saha- Barwala-Panchkula section of NH-73 from km 71.640 to km 179.249 in the State of Haryana under NHDP Phase-lll on (DBFOT) basis. Location: Panchkula Haryana National Highways Authority Of India S.S. Gaharwar, General Manager (Tech)- H, G-5 & G-6, Sector 10, Dwarka, New Delhi 110 075. T: 011-25074100, 4200 Ext 1339, F: 25074100 Extn. 2619, E: ssgaharwar@nhai.org
N
ew flyover construction near Dera Bassi on on the Chandigarh-Ambala national highway to take off soon. NHAI has designed this 1,150 metre long flyover. This flyover will begin from the Bhankharpur railway overbridge and end near the Sukhmani Engineering College. Location: Dera Bassi Punjab Budget: 125 Crore National Highways Authority of India (NHAI) Anil Kumar Sharma, General Manager, G-5 & G-6, Sector 10, Dwarka, New Delhi 110 075, Delhi. T: 011- 25074100/4200, F: 25074100. M: 09968309230
T
he proposal to build a steel flyover on JC Road, from Minerva Circle to Hudson Circle seems to be only on paper for the last ten years. The proposed JC Road flyover will be a 2.2-km elevated road. Location: Bangalore Karnataka Budget: 120 Crore Bruhat Bengaluru Mahanagara Palike (BBMP) Ranga Raju, Engineer in Chief, 21st floor PUB, MG Road, Bangalore- 560002, Karnataka. T: 080-22975803, 22975829, 22975815, M: 09740813571 (Krishna Swamy, Chief Engineer)
U
IT Udaipur is gearing up to undertake road repair works across the city. The project includes 20 major roads around the city which is likely to cost Rs 250 crore. UIT has also included ring road construction around Udaisagar Lake, along with beautification work throughout the proposed ring road among other projects. Location: Udaipur Rajasthan Budget: 250 Crore Urban Improvement Trust (UIT) Giri Raj Singh Hada, Additional Chief Engineer, Near NAD Circle, Kota- 324009. T: 0744-2500733, 2500951, 2500879 (Ashutosh A.T. Pednekar, District Collector)
P
lans to undertake improvements to Holagundi to Sovenahalli road from km.6.00 to 9.00 in Hadagali taluk Bellary district under nabard ridf 19. Location: Bellary Karnataka Government Of Karnataka, Public Works, Port And Inland Water Transport Dept Executive Engineer, Bangalore, Karnataka, T: 08399-240143
www.ind-safety.com
P
lans to undertake re-laying of 10,000 interior roads in the city. Some of these roads were expected to be laid with cement concrete. This was announced in May 2014. The corporation council has decided to re-tender the road works in some areas as the earlier bids failed to elicit response.
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
83
PROJECT UPDATE
Location: Chennai Tamil Nadu Budget: 1200 Crore
Location: Gayatri Projects Ltd Gayatri Projects Ltd Ramakrishna, Cheif General Manager, B-1, T.S.R. Towers, 6-3-1090, Raj Bhavan Road, Somajiguda, Hyderabad-500082, Andhra Pradesh, T: 040-23310330, 233314284,23314296, F: 23398435, E: gplhyd@gayatri.co.in (Sandeep Kumar Reddy, MD)
Corporation of Chennai M.Sathiyaseelan, Public Relation Officer, Ripon Building, Chennai - 600003. T: 022-25383785, 25619256, M: 9445190944 (D Karthikeyan, Commissioner)
P
lans to construct elevated road from Taramani to Siruseri Under Phase -I and From Siruseri to Mahabalipuram Under Phase-ll, for a length of 45 km, along OMR, Chennai. As of now, the authority seeks consultants services to prepare detailed project report for this project. Location: Chennai Tamil Nadu Tamil Nadu Road Development Company Ltd L Balaji, Chief General Manager, Sindhur Panthion Plaza, 2nd Floor 346, Pantheon Road, Egmore Chennai - 600008, Tamil Nadu. T: 044- 42152130, 28194800 / 4900, F: 28195800, E: itelsiteoffice@gmail. com, (D Vivekanandan, IAS, MD)
P
lans to design and construct 144 metre span long PSC continuous type Chalti bridge over Ladhiya at km 34.500 on road tankpur tawaghat under project STF Hirak in the state of Uttarakhand. Location: Hirak Uttarakhand Budget: 6 Crore Border Roads Organisation (BRO) S.P Sharma, Deputy Director General (West), Seema Sadak Bhawan, Ring Road Naraina, Delhi Cantt, New Delhi 110010, T: 011-25686957, 25686851
H
KR Roadways Ltd (HKRRL) is the SPV of Gayatri Projects Ltd. HKRRL has received a provisional completion certificate from an independent consultant for Hyderabad-Karimnagar- Ramagundam roadway. The 207-km highway stretch is part of State Highway 1, connecting the important districts of Hyderabad, Medak and Karimnagar.
84 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
SPORTS INFRASTRUCTURE
P
lans construction of multipurpose indoor sport complex etc at Hyderabad. Location: Hyderabad Andhra Pradesh Budget: 0.70 Crore Greater Hyderabad Municipal Corporation M Sreemannarayana, Superintending Engineer (Projects-II), Hill Fort, Adarsh Nagar, Hyderabad, Andhra Pradesh, T: 040-21111111, M: 9878977894
P
lans to undertake construction of sport complex, cricket stadium and sports hostel at Haldwani, Nainital. Location: Nainital Uttarakhand Indira Gandhi International Sports Complex Society C/o Director of Sports, Maharana Pratap Sports College, Raipur,Dehradun, T: 0135-2781414, E: igiscshld@gmail.com
www.ind-safety.com
PROGRAMS OFFERED
vkink izcU/u ,oa vfXu foKku laLFkku
INSTITUTE OF DISASTER MANAGEMENT AND FIRE SCIENCE H.O. : Rana Complex, Level-2, Maloya, Chandigarh-India-160025 Mobile : 9915327336, 9876951171 E-mail: idmfscare@gmail.com website : www.idmfs.com INDUSTRIAL SAFETY REVIEW
85
JULY 2014
SECURITY INDUSTRY
TECH UPDATE
........but who is watching the watchman?
Guard Tour Systems
A
guard tour patrol system is a system for logging the rounds of employees in a variety of situations such as security guards patrolling property, technicians monitoring climate-controlled environments, and correctional guards checking prisoner living areas. It helps ensure that the employee makes his or her appointed rounds at the correct intervals and can offer a record for legal or insurance reasons. Organizations hire security guards to protect their facilities on a ‘twenty-four hour, seven day per week’ basis. These guards are expected to carry out periodic patrols of the facility to detect suspicious & abnormal activity, including doors left unlocked, burned out lights, water leaks, safety hazards, and other such conditions. To get the most value of such patrols it is essential that the guards patrol according to established procedures. Patrols should be made at least several times per shift, and should cover all
important areas of the facility. The person managing the security program establishes a patrol route or “tour” that includes stops at all the important points that the security officer needs to check. Depending on the size of the facility, there may be several different tours, each which includes different areas of the facility. The officer usually alternates between tours, doing one tour during the first hour, and a different tour during the second hour, and so on throughout the shift.
In this way, all important areas of the facility are checked at least every two hours. Such systems have existed for many years using mechanical watch clock-based systems (watchman clocks/guard tour clocks/patrol clocks). Computerized systems were first introduced in Europe in the early1980s, and in North America in1986. Modern systems are based on handheld data loggers and RFID sensors. The system provides a
About Author Kiron Kunte has over 35 years of design and solutions experience, in Security, Telephony and Networking infrastructure. He is a graduate of IIT Bombay, a Fellow of the Institute of Engineers and has a post-graduate diploma, from Bombay University, in Systems Management. He is professionally certified in the design and engineering of Data Centres, IP Telephony, Video surveillance and Structured Cabling solutions. He heads Norik Konsult, a practice that offers advisory, design and system planning help to upgrade or build a new Telephony, Security and Networking infrastructure.
Mr. Kiron Kunte
86 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
For more information contact: www.norikkonsult.com
www.ind-safety.com
SECURITY INDUSTRY
means to record the time when the employee reaches certain points on their tour. Checkpoints or watch stations are commonly placed at the extreme ends of the tour route and at critical points. Some systems are set so that the interval between stations is timed so if the employee fails to reach each point within a set time, an alarm can be triggered and other staff dispatched to ensure the employee’s well-being. During many shifts, security guards may work alone and with very little or no supervision. Often, security guards tend to remain at their posts and do not want to go on patrol. This can be particularly tempting at times when the weather is bad and going on patrol means going out in the cold or rain. Even when guards do go on patrol, there may be certain portions of the tour that are difficult to access or that require that a large number of stairs be climbed. There will always be a tendency for guards to skip these portions of the tour. Guard Tour systems have been developed to solve these problems. In general, guard tour systems record the activities of the security guards to determine if guards are making their tours when they should, and to verify that they are covering all portions of their tour.
Typical Deployment. The employee carries a portable electronic sensor or electronic data collector which is activated at each checkpoint. Checkpoints can consist of iButtons (addressable, dedicated ‘trackers’), magnetic strips, proximity microchips such as RFIDs, or optical barcodes.
www.ind-safety.com
TECH UPDATE
The data collector stores the serial number of the checkpoint with the date and time. Later, the information is downloaded from the collector onto a computer where the checkpoint’s serial number will have an assigned location (eg. East Perimeter Fence, Block Number 1, etc.). Data collectors can also be programmed to ignore duplicate checkpoint activations that occur sequentially or within a certain time period. Computer software used to compile the data from the collector can print out summaries that pinpoint missed checkpoints or patrols without the operator having to review all the data collected. Because devices can be subject to misuse, some have builtin microwave, g-force, and voltage detection.
There are three basic types of guard tour systems in use: • Watchman’s Clock System • Electronic Guard Tour System • Guard Tour Integrated System
markings that indicate each of the 24 hours in the day. At various points along the patrol route, “key stations” are installed. Each key station contains a large metal key that looks something like a skeleton key. Each key has a unique key number. The key is usually fastened to the key station using a metal chain to keep the key from being removed. The key station usually has a door that allows the key to be stored when not in use. When on patrol, the security officer stops at each key station along the route, removes the key, and inserts it into the watchman’s clock. Doing this causes the key number to be printed on the paper dial located within the clock. The key number is printed next to the markings on the dial which indicate the present time. This provides a record of which keys were used and at what times. At the end of each day, the paper dial is removed from the watchman’s clock and replaced with a new one. The paper dials can be examined by the security manager or supervisor to determine if patrols were completed on time and that all stops along the patrol route were properly made. The paper dials can be filed away to provide a long-term record of all patrol activity.
Watchman’s Clock System
Electronic Guard Tour System
This is the oldest type of guard tour system in use and has been around since the middle of the 19th Century. The watchman’s clock is a circular device about eight-inches in diameter and has an analog clock face on the front of it. The watchman’s clock is usually provided in a leather carrying case with shoulder strap which allows it to be carried by the security officer when on patrol. Inside of the watchman’s clock is a circular paper dial. This dial is printed with
Electronic guard tour systems are similar in function to the watchman’s clock system except use electronic rather than mechanical components. An electronic data gathering device, called a “wand”, is used in place of the watchman’s clock. The physical shape of the wand varies depending on the manufacturer, but is usually a small hand-held device in the shape of a pen or small PDA. The wand is carried by the security officer when on patrol.
Types of Guard Tour Systems
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
87
SECURITY INDUSTRY
TECH UPDATE
“Checkpoint stations” are used in place of key stations. These stations contain some type of device that can be read electronically and are used in place of the mechanical key. Depending on the manufacturer and type of system used, a barcode, magnetic strip, or memory button may be used in the checkpoint station. Like key stations, checkpoint stations are installed at various points along the desired patrol route. When on patrol, the security officer stops at each checkpoint station and scans it using the wand. This causes the location of the station as well as the current time to be recorded in the wand. Most electronic systems also allow the security officer to make a record of any abnormal conditions found at or near the checkpoint station. For example, if a checkpoint station was located at a door, and this door was found unlocked when checked by the security officer, he or she could enter a code indicating that the door was found unsecured. Depending on the system, this code can be entered either on a keypad located on the wand itself, or by scanning the appropriate code in an “incident booklet” that is carried by the officer. At the end of the tour or at the end of each shift, the security officer places the wand into a “docking station”. This docking station is connected either to a printer or personal computer and is used to download information from the wand. If connected to a printer, all information concerning patrol activities can be immediately printed to create a written report. If connected to a computer, the information from
88 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
the wand is downloaded into a computer database. This database can then be sorted and various types of activity reports can be displayed on the computer screen and/or printed.
be created that shows all guard tour activity for any time period. This report can be displayed on a computer screen or printed to create a written report.
Guard Tour Integrated System
• Built-in email and cell phone capability in guard tour device. • GPS integration to enable active and real-time tracking of security guards. • Built-in security incident reporting capability in guard tour device. Real-time status updates for all incidents. • Built-in equipment inspection reporting capability to automate things such as the inspection of fire extinguishers.
Technology enhancements Many facilities already have an electronic security management system that is used to provide card access control, alarm monitoring, & closed-circuit television monitoring. At these facilities, it is possible to integrate the guard tour system with the security management system. This type of arrangement is known as an “integrated guard tour system”. Integrated guard tour systems use card readers instead of key stations or checkpoint stations. Most often, existing card readers that are already used to control doors are also used as “guard tour” readers, allowing them to perform double duty. If needed, additional card readers can be installed at certain points where guard tour stations are needed and a reader doesn’t already exist. Security guards do not need to carry any special type of equipment such as a watchman’s clock or wand. Instead, they can use a regular access card at the card readers set up as guard tour readers. Special “guard tour” software is provided on the computer that controls the security management system. This software is programmed so that system knows which card readers are to be used as guard tour readers and which access cards will be used by the security guards. When on patrol, the security officer stops at each location along the patrol route and swipes his or her access card at the card reader. This causes the time and location to be recorded into the guard tour software. At any time, a report can
Benefits of a Guard tour system. The use of a guard tour system offers the following benefits: • When guards know that their activities are being recorded, there is a strong motivation for them to follow the rules and make patrols the way they are supposed to. • Alarms generated when a security staff fails to reach a designated point within the desired time slot could trigger the need for back up thus ensuring the well being of the security staff. • The guard tour system provides a written record of all patrol activities, allowing discrepancies in patrol procedures to be quickly identified. • Appropriate disciplinary actions can be taken against guards who fail to comply with established procedures. • The written record provided by the guard tour system can also be used for incident investigation and as proof of patrol activities for insurance companies or regulatory agencies.
www.ind-safety.com
SECURITY INDUSTRY
TECH UPDATE
Thermal imaging helps Kalmthout
fire department during wildlife fires and other interventions Kalmthout is located about 20 kilometers north of Antwerp, Belgium. Although being a small village of approximately 20,000 inhabitants the local firefighters are well equipped. Apart from their normal firefighting duties they also need to protect the natural reserve “Kalmthout Heat” against fire. Thermal imaging cameras are since long part of their equipment. Kalmthout Heat during the fire in 2011 (image courtesy of Boris Rousseeuw)
T
hermal imaging cameras are definitely not new to us, explains lieutenant Ronny van Riel, commanding officer of the Kalmthout fire fighters. “We started to use them about 10 years ago. At that point in time we acquired a FireFLIR. The unit works perfectly and has proven its worth.” “Recently we also acquired a FLIR K50. This camera is a lot more compact than the FireFLIR which makes it a lot more practical to carry around. Firefighters clip it easily to their turnout or Self Containing Breathing Apparatus (SCBA) and carry it around hands-free until they need the device.” “We have the FLIR K50 mounted in a charger in the truck that always arrives first at the scene. Thanks to its fast start-
up time the FLIR K50 is immediately ready for action when we need it.”
Fire on the Kalmthout Heat Heather stretching to the horizon, purple moor-grass swaying in the breeze, golden bracken fronds, windswept silver birch, chirruping meadow pipits and calling curlews: the Kalmthout Heat. This natural reserve, which a surface of over 8,000 hectares is located in Kalmthout. During the hot and dry summer season this unique and protected area is susceptible to fires. “In 2011 a fire started in the Heath.”, explains lieutenant van Riel. “It spread rapidly and at the end about 600 hectares were destroyed. Extinguishing the fire was a massive operation during which
The lightweight FLIR K50 camera provides clear and detail rich images of 320x240 pixels.
we were supported by numerous firefighting corpses. Hundreds of firefighters worked day and night, sometimes risking their lives, in order to minimize the damage at this unique nature reserve.” “Also during this operation thermal imaging came into play. In areas where we succeeded to extinguish the flames we were confronted sometimes with
Lieutenant Ronny van Riel, commanding officer at the Kalmthout fire department.
90 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
www.ind-safety.com
SECURITY INDUSTRY
“ground fire”. Although not visible to the human eye, the fire rages underground. It can lead to a full outbursting fire, several meters away from it’s last origin. Thermal imaging cameras showed us clearly hot spots in the heath where “undergroud fire” was still raging. By further extinguishing and cooling down the area we prevented spontaneous self combustion.” “Not only did we use our handheld thermal imaging camera for looking at hot spots. Helicopters equipped with gimbal thermal imaging cameras flew over the area and directed us to places where underground fire was raging.”
Protection against rollovers thanks to temperature measurement “When there is a fire we often need to enter in thick smoke. For firefighters it is sometimes hard to see their hands in front of their face. Thanks to a thermal imaging camera they can see through the smoke, see the lay-out of the room and determine if there are still people around. But thanks to the fact that a thermal imaging camera can also measure temperature, it helps to protect our firefighters against a dangerous phenomenon: a roll-over.”
FLIR K50 in the hands of one of the 40 volunteer firefighters of the Kalmthout fire department.
www.ind-safety.com
TECH UPDATE
The fire condition known as rollover is a dramatic display of unburned, superheated gases, that gather at the ceiling or upper levels of a fire area. It’s not the materials in the room that are burning, but the flammable gases that are given off by the materials. When these concentrated gases reach their ignition point the temperature in the room will rise rapidely. “If we go inside a building and see that we might be confronted with a roll-over, we closely monitor the temperature of the ceiling with the thermal imaging camera while we try to cool down the smoke. If the temperature exceeds a certain value we know that we can be confronted with a flash-over. In order not to bring the lives of firefighters in danger we need to leave the room before a roll-over can take place. “When we are confronted with a burning building at least two firefighters enter the scene. One is carrying the fire hose and another the thermal imaging camera so that the can show the lay-out of the structure and help his colleague to direct the nozzle pattern where it needs to go.”
Chimney fires A chimney fire often begins with incomplete combustion of fuel . Unburned volatiles are heated to their vapor state but not consumed due to a lack of adequate heat and oxygen within the appliance that is connected to the chimney. Volatile distillates escape into the chimney, where they contact cooler surfaces and condense into tar-like deposits, and soot. Successive layers accumulate until either the chimney plugs completely, or the chimney reaches a temperature and oxygen level at which the deposit will ignite. “When we are confronted with a chimney fire we use the thermal imaging camera to determine the hottest spot in the chimney. This
FLIR K50 next to the FireFLIR. Although the FLIR K50 is the preferred tool due to its compactness, the FireFLIR is still proving its worth after 10 years and is still in operation. It was extensively used during the fire at the Kalmthout Heat in 2011.
spots stand immediately out on the thermal image. We can monitor the progress of our extinguishing efforts with the camera.”
More than fire only “Recently we used the FLIR thermal imaging camera to look for a child that got lost in the Kalmthout Heath. Since dusk was arriving we used our thermal imaging cameras during the search since we knew that the cameras would pick up the heat signature of the child. At the end the child was recovered safely without needing the thermal imaging cameras but if not, the cameras would have been a great tool during total darkness.” “Thermal imaging cameras are a great tool for every firefighter for multiple applications. With the FLIR K50 in our primary vehicle and the FireFLIR in our secondary, we are well equipped. The cameras help to protect the lives of our firefighters and helps them to save the lives of others.”, lieutenant van Riel concludes. For more information, FLIR Systems India 1111, D Mall, Netaji Subhash Place, Pitampura, New Delhi-110034, India TeL: 011-45603555 Email : flirindia@flir.com.hk Web: www.flir.com
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
91
SECURITY INDUSTRY
TECH UPDATE
Truly innovative shapes & uncompromising safety These are the credentials of the new Boom Barriers offered by Gandhi Automations Pvt Ltd
G
andhi Automations offers a wide range of models in automatic Boom Barriers which are reliable and maintenance free. Models are available for boom length up to 8.4m to suit various applications like car parking sites, condominiums, toll collection & industrial entrances. It is highly compact in size with extremely silent operation. The soft edges, rounded corners and high performance of the Boom Barriers offered by Gandhi Automations are suitable for any type of installation environment. The newly designed and technologically advanced Boom Barrier is an ideal solution for a totally safe access control to high transit environments such as hotels, banks, shopping malls, as well as blocks of flats, companies and camp sites ensuring their use to authorized people only. The pickled, metallic colour painted sheet metal does not degrade with time, despite adverse weather conditions, and gives the boom barrier a clean look. The key operated lever release system can be promptly accessed from the
92 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
inspection side; fitted with a cover plate, the system can safely handle all emergencies in case of power failure. The top structure has a provision for an aerial to be installed to avoid any vandal attacks. The new cabinet features large dimensions, to cater for the need for greater sturdiness and convey stronger-impact aesthetics. The electronic panel is positioned on the top part of the barrier at a height that permits easier access to components and therefore allows conveniently carrying out setting and maintenance jobs. The new aluminium arm has been designed to avoid any shearing problems, thanks to a rubber guard located in the top and bottom section and to a newly designed rounded rotation pin. The arm, round or elliptical, can be up to 8 meters long. The new, elliptical shape of the barrier arm ensures better wind resistance, thus avoiding any swinging in the 6 meter version. The arm is fitted with a rubber end plug and a provision for accessories. To ensure more visibility in the more demanding applications, the direct
current version is fitted with an arm lighting kit: the LED goes off when the arm is up; it flashes when the arm is moving and is continuously lit when the arm is down, in order to enhance its outline. They are available in grey and red or in stainless steel, the ideal solution for harsh environments such as areas near the sea. The sturdy steel structure comes with scratch – proof coating which can resist harsh weather conditions. The wide range of lengths and accessories available ensure that all installation requirements are met. It can also be integrated with wide range of accessories and all kinds of access control systems. All models are equipped with a provision of manual operation in the event of power failure and battery back-up facility in selected models.
For more information, Website : www.geapl.co.in
www.ind-safety.com
SECURITY INDUSTRY
TECH UPDATE
Solus canteen management solutions
C
anteen facility is provided in almost all the organizations, but proper canteen management is tedious and cumbersome task. The traditional approach of canteen management that is printing Canteen Coupons, re-ordering them from time to time, keeping a register of issue and usage, calculating monthly consumption of each employee and deduct the same from their salary, no prior information of the required amount of food, searchi ng for loose change when there is a long queue in front of you is what you don’t want in the canteen. Just imagine the loss and cost involved in following this practice; Now Say GOOD bye to the manual process. Solus Canteen management solution is a user friendly, completely integrated, web based enterprise solution that facilitates quick and efficient operation to cover larger section of employees of an organization. Canteen reader allows Card holders to flash their cards to avail meals and also Employees can use their pre-programmed Smart Cards to make cashless payments at canteens and cafeterias using Solus’
94 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
Canteen Terminal. Our Software manages all tasks related to issue of coupons to permanent, temporary, trainees, outsourced employees and Guests. As the administrator, you can easily add, remove or change items, descriptions, add photos for each item and more. This solution can be integrated with self service KIOSK which can be placed in the Canteen and the information flow to Employee, to the canteen vendor and HR is seamlessly available.
Benefits of using our Canteen Management Application • Improve your quality of service through smart and innovative technology. • Minimize the amount of staff members queuing in the canteen by allowing them to order from your menu through the canteen application/ KIOSK terminals. • Time based restrictions for food consumption. • Advance booking facility for Employees, staff and guests. • To avoid proxy punching, photo display module can be integrated
•
•
• • •
with the system which displays the photograph and Employee details. Rules and regulation can be integrated within the system like time based food booking, food availed if booked, one time food consumption restriction and so on. Helps in resource/raw material planning for canteen and thus reduce Food wastage. Accommodates for food subsidies too. Supports both Pre-paid and postpaid methods of accounting. Wide range of reports for quick interpretation of consumption.
With experience in customizing Canteen management solutions for multiple organizations needs and expectations, SOLUS has proven time and time again.
For more information, Web: www.solus.com
www.ind-safety.com
SECURITY INDUSTRY
TECH UPDATE
Hikvision megapixel cameras secure 2014 FIFA world cup Brazil
H
ikvision, the global leader of video surveillance products and technologies, has been selected to provide comprehensive security solutions to safeguard 2014 FIFA World Cup Brazil -- the biggest event on the planet. The security projects include Brazil’s BRT MOVE bus stations and Mineirao stadium in Belo Horizonte, a host city for the World Cup. Hundreds of Hikvision megapixel network cameras and speed domes have been successfully applied to ensure a safer environment for local citizens and visiting tourists. When it comes time for the Belo Horizonte Traffic Agency to choose a primary security camera, they rely upon Hikvision to make sure both their quality and safety needs are successfully addressed. As such, over 300pcs of Hikvision DS-2CD864F-E 1.3MP WDR network cameras were selected to be installed at the Brazil BRT MOVE bus stations to protect citizens, visitors and their property effectively. This camera, designed with excellent low light capability, allows enhanced imaging performance in low light scenarios with minimum illumination of 0.6Lux
96 |
JULY 2014 | INDUSTRIAL SAFETY REVIEW
@ F1.2 in color mode and 0.08Lux @ F1.2 in B/W mode. In addition, 3D digital noise reduction and true day / night ensure excellent image quality regardless of time of day as well as a resolution of 1280x960. Benefitting from the superior megapixel images delivered by this camera, security personnel will be able to easily identify suspicious individuals and objects at bus stations and their surroundings. The high quality video images could also be provided for forensic purposes if needed. The other remarkable project for the World Cup is the Hikvision security solution for Mineirao stadium surroundings. Mineirao stadium, one of the most iconic venues in Brazilian football, underwent two and a half years of renovation to transform the stadium into a modern, safe, and sustainable arena, with room for over 62,000 spectators. It will be the venue for a total of 6 matches for the World Cup. Hikvision, along with the Military Police of Minas Gerais (PMMG), designed an IP surveillance solution for the streets around the stadium. 74pcs of Hikvision DS-2DF1-57A 1MP high speed domes in total were installed for World Cup security purposes and city surveillance. These Hikvision network speed domes are primarily tasked to protect fans and visitors against riots. The Hikvision DS-2DF1-57A offers a 1280x960 resolution at 25 to 30 frames per second, with an 360° endless pan range at a speed of 540°/s, and a -5°-90° tilt range at a speed of 400°/s. This allows the speed domes to immediately zoom onto
moving objects and deliver crystalclear images, regardless of outdoor light. This is an extremely important feature, since the police need to quickly and accurately recognize and respond to riots or other crime, establishing a secure environment for the World Cup. According to Alvaro de Souza, CCTV manager at VMI Sistemas de Seguranca, Brazil’s official Hikvision Distributor, “Hikvision cameras with megapixel resolution come to meet a real need in the city of Belo Horizonte and for the Military Police of Minas Gerais for identification of suspects, supporting decision making for strategic military actions and protecting citizens during and after the World Cup 2014. Design, image quality, durability, maintenance and local support were key points for this wonderful solution to be chosen. I consider it a major milestone in the history of the Belo Horizonte & this project complements a great legacy of thousands of Hikvision cameras already installed in Brazil.”
For more information, Website: www.hikvision.com
www.ind-safety.com
SECURITY INDUSTRY
TECH UPDATE
Choose right camera to save bandwidth & NVR storage
By Steve Carney, Director - Product Management, Video Tyco Security Products
W
ith each stage of development in high-definition IP cameras, as the megapixels increase, there is a greater emphasis on tailoring solutions to avoid major impact on network bandwidth and storage. As camera features are improved and enhanced, so is the need for greater bandwidth and storage. While H.264 compression enabled widespread use of megapixel resolution, bandwidth and storage are still a major concern for many customers. More industries and organizations have an increased need for greater details and features when purchasing high-definition cameras. From a cost standpoint, storage has an impact on customer purchasing. While storage may seem inexpensive relative to other technology, when a customer adds up the amount of storage needed for a full megapixel deployment, it is not necessarily cost-effective. This results in the purchase of fewer cameras. Fewer cameras may result in security incidents being missed, which can directly impact a business. Face detection technology significantly combats bandwidth &
www.ind-safety.com
storage costs. A camera’s ability to detect a face in a scene and send an alarm without increasing bandwidth and storage is key. Superior highdefinition cameras can detect a face and increase the bit rate around it, while still being able to see the surrounding areas in the scene. Think of this as an intelligent region of interest. Customers concerned about bandwidth are generally on “shared networks.” Shared networks are those where traffic from the security devices coexist with traffic from other business functions, as opposed to dedicated networks where only security traffic travels. In applications where capturing quality facial imagery is important, choosing the right camera can make a difference. With some surveillance cameras, you have no choice but to set the resolution and quality high enough to capture the faces with ample clarity. But when those settings are used all the time, whether there is a face in the scene or not, this wastes bandwidth and storage on video that is not important. In other cameras, you might have to crop the image in order to save bandwidth and storage, but this often loses important scene information. The best option is an intelligent surveillance camera which can be set at a lower overall bit rate but one that will boost the quality around faces detected in the scene. This captures high quality face images, but reduces overall bandwidth and storage consumption by not wasting it on less interesting parts of the scene. But those parts of the scene are still available so that important information is not lost.
The Illustra 600 IP HD Mini camera is a good example of face detection technology. This camera is uniquely suited for monitoring cash registers, tellerlines, entrances, and other environments where high-quality facialimages are important. With builtin facial detection technology,the Illustra 600 finds faces in the scene and improves the quality of theimage around the face. Facial detection allows you to get clearerimages, while reducing the bit rate in the rest of the scene. Thisfurther reduces bandwidth and storage costs. The Illustra 600 cameras enhance viewing quality withuser-defined regions of interest. The camera can be programmedto manage both higher and lower bit rates in areas customizedfor each scene. Too often, significant security events take place at night or in low lighting conditions. The Illustra 600s deliver clean, crisp images even in near darkness. This clarity has a further benefit – reduced storage cost. The “noisy” low light images of some megapixel cameras increase bandwidth and storage consumption.
INDUSTRIAL SAFETY REVIEW | JULY 2014 |
97
ADVERTISERS INDEX COMPANY NAME
PG. NO.
A
COMPANY NAME
PG. NO.
I
41
IBEX GALLAGHER PVT. LTD.
27
ADITYA INFOTECH LTD.
FRONT GATEFOLD
IFSEC INDIA 2014
75
39
ALLIED LEATHER FINISHERS PVT. LTD.
49
ALLIED SAFETY EQUIPMENTS PVT. LTD.
35
ANSELL LIMITED
INSIDE BACK COVER
D
DRAEGER SAFETY (INDIA) PVT. LTD. E
E4 EVENTS
89
F
FIRE SAFETY DEVICES PVT. LTD.
59
FIREFLY FIRE PUMPS PVT. TLD.
43
G
71
INSTITUTE OF DISASTER MANAGEMENT & FIRE SCIENCE
85
57
RASHI PERIPHERALS PVT. LTD.
INSIDE FRONT COVER
REFLECTOSAFE
31
RR KABEL LIMITED
20
S
K
KARAM INDUSTRIES
100
KRM CORPORATION
99
LARSEN & TOUBRO LIMITED
25
LIBERTY SHOES LTD.
13
M
MAGNUM MEDICARE PVT. LTD.
63
MARVEL GLOVES INDUSTRIES
51
MATRIX SECURITY SOLUTIONS
3&5
MIRCOM GROUP OF COMPANIES
RAMANA SAFETY AND SYSTEMS (I) PVT. LTD.
INNER COVER & GATEFOLD
SAFEX FIRE SERVICES LTD.
10
SAMRIDDHI AUTOMATIONS PVT. LTD.
INSIDE FRONT COVER
SCHNEIDER ELECTRIC
23
SCHNEIDER ELECTRIC - PELCO
29
SIEMENS
15
SOLUS SECURITY SYSTEMS PVT. LTD.
37
SURE SAFETY (INDIA) PVT. LTD.
45 & 47
V
VANTAGE INTEGRATED SECURITY SOLUTION (P) LTD.
55
VIJAY SABRE SAFETY PVT. LTD.
53
O
GALAXY EARTHING ELECTRODES (P) LTD.
73
GANDHI AUTOMATIONS PVT. LTD.
61
GODREJ SECURITY SOLUTIONS
1
GUNNEBO INDIA PVT. LTD.
9
H
HID GLOBAL
INDIA INTERNATIONAL SECURITY EXPO 2014
L
11
PG. NO.
R
ADIT GROUP
AKTION SAFETY SOLUTIONS PVT. LTD.
COMPANY NAME
19
INDUSTRIAL SAFETY REVIEW
W
OBO BETTERMANN INDIA PVT. LTD.
21 WORLD DISASTER MANAGEMENT CONGRESS 2014
P
PAARTH VALVES PVT. LTD.
67
X
PELICAN PRODUCTS AND SERVICES INDIA PVT. LTD.
33
XYLEM INDIA
PRAMA HIKVISION INDIA PVT. LTD.
BACK PAGE
PROLITE AUTOGLO LIMITED
98
7
95
93
Z
ZICOM ELECTRONIC SECURITY SYSTEMS LTD.
17
JULY 2014
EMPOWERED.
All-in-one oil grip, oil repellence and cut resistance. The new HyFlex® 11-927 features ANSELL GRIP™, INTERCEPT ™ and RIPEL™ technologies in a single oil repellent glove. For secure handling of sharp parts in oily conditions, it sets an unprecedented new standard for oil performance and protection.
Find out more: www.ansell.eu ® & ™ are owned by Ansell Limited or one of its affiliates. © All Rights Reserved 2013. Neither this document nor any other statement made herein by or on behalf of Ansell should be construed as a warranty of merchantability or that any Ansell product is fit for a particular purpose. Ansell assumes no responsibility for the suitability or adequacy of an end user’s selection of gloves for a specific application.
HyFlex_11-927_ADV-ER-INDIA.indd 1
11/15/13 10:19 AM