Easter bracelet plans-how to make bracelets with beads

Page 1

Easter bracelet plans-how to make bracelets with beads Use some simple 10mm pearl beads and gauge wire from the craft store, you can rapidly learn how to make bracelets with beads under half an hour, especially to create an fabulous and festival Easter bracelet.

Just in time for Easter. Make a significant vivid Easter bracelet for yourself, your friend, families or anyone other will love wearing handmade jewelry of a kind of gift. While practicing by following this how to make bracelets with beads plan, you will acquire incredible customized Easter gifts and at meanwhile go over the wire wrap techniques.

Stuff you’ll need in your Easter Bracelet: 

10mm Acrylic Beads-Imitation Pearl

1mm Brass wire

Jumprings

Clasp

Side Cutting Plier

Round Nose Plier

Needle Nose Plier

Here’re details of how to make bracelets with beads: Step1: make bead pattern

the

fundamental

Step2: create the triangle pattern 1. Take out one more 12cm long wire and loop

1. Snip about 12cm long wire and then slide

one end for kind of Eyepin;

one 10mm pearl bead onto it;

2. Slide on one 10mm pearl bead, the

2. Pull two wire ends crisscross over the

fundamental bead pattern in step1 and then

bead;

one 10mm pearl bead;

3. Bend one end to form a 90 degree;

3. Bend the wire into 90 degree;

4. Wrap the horizontal end around the vertical

4. Loop the other wire end and then process

one. Normally, 4 times is ok;

the remaining wire in same way.


5. Remove the extra wire portion of wrapping

5. Assemble each individual triangle bead

end;

pattern for an Easter bracelet, just connect

6. Bend the vertical wire end outwards into a

the beginning and ending wire loops before

90 degree again;

close them.

7. Create a loop at the bead top by Round Nose Plier; 8. Wrap the remaining wire around 4 times and finally trim off the sticking out wire portion in same way. At present, you crucial basic bead pattern for the Easter bracelet has finished! Just repeat the same processes for more of it.


Step3: add on a closure for Easter bracelet

Once grouped all triangle clusters, attach the clasp and Jumprings to two ends.

That’s it. Now you have obtained a new trinket around your wrist. Fell so proud of yourself? However, that’s not enough. Just set your mind free and to branch out and try more bead collocations you’d like to. Hope this how to make bracelets with beads institutions can help you figure out more stunning and festival Easter bracelet, necklace, earrings……

For more stunning theme inspirations, please visit: www.pandahall.com/learning-center.html


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.