How to make earring cuffs- fab wire earring tutorial This wire earring tutorial is going to show you how to make earring cuffs just with 20 gauge wire and pliers. The ornate earring cuff jewelry can best adorn your ears.
Wire earring tutorial is always fascinating! Our how to make earring cuffs project belongs to that kind. Only if you master the technique about earring cuff making, you can later apply whatever wired or fab ideas on your jewelry.
Materials and tools:
0.6mm brass wire
Purple bicone and drop beads
Jump rings
Round nose plier
Flat nose plier
Wire cutter
Instructions: Step 1: prepare wire and wrap the upper part 1st, snip a piece of wire about 12.5cm long; 2nd, fold right end 1/3 with plier; 3rd, do the similar thing at left end and leave the center part is about 2.5cm length; 4th, turn around the wire piece and loop the upper part into desired pattern.
Step 2: continue wrapping to finish the lower part
Step 3: make dangles for the earring cuffs
1st, from center position fold the lower part
1st, use wire to make wrapped bead dangles;
again and add a purple bicone on;
2nd, attach dangles onto earring cuffs.
2nd, keep on folding to secure the bead from falling down; 3rd, curl the rest wire and finish with a nice loop; 4th, shape the whole piece into cuffs with plier.
Oookay! The beautiful earring cuffs are successfully created. And we also end up our how to make earring cuffs project. Based on the earring cuff, utilize ear pin to make another piece of piercing earring and combine the two by thin chain, then the new wire earring tutorial is well finished.
Jewelry tools needed during the earrings making please click: http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html