Make your own charm necklace out of several Pearlized Acrylic beads and seed beads How to make your own charm necklace out of common beads that you have bought from stores? Here, a practical charm necklace making project is available. By the very common beads, you can produce a characteristic jewelry ornament with a new “V” shape!
To be frank, there are larger numbers of techniques to make your own charm necklace as the style you desire. You can simply turn a photo or treasured bead into a charm pendant. Or if you like, you can also create an entirely distinctive charm necklace out of three kinds of beads: glass beads, Pearlized Acrylic beads and seed beads. Have this interested you? Then, you can start now.
Main materials needed for charm necklace:
10mm Pearlized Acrylic bead
4mm Pearlized Acrylic bead
4mm Bicone Glass bead
12/0 seed bead
Bead cap
Chain
Eyepin
Headpin
Tiger tail wire
Side Cutting Plier
Wire-cutter Plier
Round Nose Plier
Instructions for making your own charm necklace: Step1: make out the “V” shape skeleton This part is mainly consisted of several linked loops out of two Pearlized Acrylic beads and two Bicone Glass Beads. Between each two loops, share one Bicone Glass Bead. Pay attention of the center portion of the pendant that in order to shape it into the “V” mark, move the two added Pearlized Acrylic beads into the below working end as the diagram show.
side
Step3: make the last surface of whole charm necklace
In the whole solid charm pendant, if regard
1. Weave the left working end through its
the portion you have made in step1 as one
adjoining pear bead and three 12/0 seed
surface, this step will teach you how to make
beads; then cross both together through one
the four side surfaces of your charm necklace.
Pearlized Acrylic beads;
1. Add two Pearlized Acrylic beads one
2. In the following parts, regard each three
working end and then cross both tips through
12/0 seed beads as one whole to make the
another one to form one surface;
loops as diagram show;
2. Lead the left working end through its
3. in the corner of charm, the left working
adjoining pear bead, and the other end string
end do not need to add or through any 12/0
three 12/0 seed bead, at last cross through
seed bead;
one more Pearlized Acrylic bead;
4. At last, hide the wire ends by weaving
3. Repeat the above procedures for the
them randomly through the beads. Usually,
second side surface; then make the third side
6~8 pieces can be enough. Trim the excess
surface out of three Pearlized Acrylic beads as
portion and you can start make your own
you did in the beginning;
charm necklace now.
Step2: make surfaces
the
four
4. Make the forth side surface which is wholly as same as the second surface; 5. At last, finishing all the step2 part by cross two working ends through three 12/0 seed
Step4: ending work 1. String one 10mm Pearlized Acrylic bead and one bead cap with the headpin, make a loop with 6mm pin and hang on a 4~5 mm long chain. 2. Hang the chain on the central corner location with a Jumpring; 3. String two Pearlized Acrylic beads with two Eyepin respectively to adorn the chain.
Now, you have completed making your own charm necklace! So delicate, isn’t it? To get one like this, all you have to do is following the above steps. Each detail has been showcased with clearly with pictures and words explanations! Or you can just freely change the color collocation of your charm necklace depending on your preference! Whatever, hope this instruction may be of some help to you!
For more delicate handmade jewelry tutorials, please visit: http://www.pandahall.com/learning-center