DMR BIKES 2012

Page 1

www.dmrbikes.com | facebook dmr.bikes | twitter @DMR_bikes


DMR DIRT JUMP TEAM RIDERS 2012

OLLY WILKINS

898 bike (26”) / Bolt bike

RAY SAMSON

898 bike (26”) / Bolt bike

My 2011 was another good one. It started with a boring shoulder injury which put me out for a few months and stuck on a road bike for a while. But I got to watch my section in 3minute gaps, my largest movie appearance yet! After getting back in the swing of things and back on my 898 I started to go to trails all over the country including some new spots I’ve never ridden before. Also I got to ride the legendary Peynier trails in the South of France on a dirtjump trip with friends. I took my DMR Bolt all over the place too, from a street race in Plymouth, Downhill in the Swiss alps, and xc in France. I hope my 2012 continues with much the same theme. Riding my bike as much as I can. This will be my 9th year riding for DMR. Lets hope they can put up with me for another year! Godspeed.

2011 was a super fun year. Started off in February with a two week trip to California which was an amazing way to start the year. Highlight for me was riding Woodward West and learning new stunts. Rode loads and thanks to DMR traveled all over Europe competing on my 898 meeting new people, riding new spots and visiting some amazing places. Was stoked to win the King of Dirt again and keep the massive trophy. Also getting my DMR Bolt, have wanted one ever since i tested the prototype a while ago, so good to have a bike i can do everything on.

Simon Pratt (JIMMY).

clinton johns

898 bike (24”)

I had a good 2011 with a injury free year and plenty of riding done. I was lucky enough to get sessions in at some of the best trails in the world, which happen to be all nice and local to me in the surrey area which is always a treat on my DMR 898. Also my trails have made the change from being illegal to legal, which is a awesome feeling knowing i can carry on building and riding in the knowledge of them not going anywhere. I was also lucky enough to get my first DIRT magazine front cover (issue #117) and interview thanks to Gareth and Ben. At the end of the summer i went on a rad roadtrip around the UK for a week, taking in some good trails and good times with some good friends.

Really happy to be on DMR for 2012 and Really looking forward to More Riding, Competitions, traveling, filming and of course another California trip.

898 bike (26”)

My Highlight for 2011 was winning the uk dirt wars series, getting to do demos at some awesome festivals and meeting some really nice people along the way. for 2012 i would like to push my riding to the next level and ride more spots across the country and Europe, meet some more people along the way and most of all have some awesome times with the DMR team!

tOm reynolds FLOW RIDER

The digging has already begun to help make a even better 2012 and hopefully plan to go abroad and ride some new and different trails.

My 2011 year has been brilliant with the help and support of the guys at Upgrade Bikes. The highlight of the year for me was riding with all the pro’s in all the UK competitions, and pulling off my 1st ever 360 backflip! My goals for next year are to improve to atleast a podium in a national competition and i cant wait to travel to some competitions abroad!

James IOANNOU FLOW RIDER

RICHARD Acott FLOW RIDER

2011 has been such a sick year, as i have managed to ride my bike so much!! I’m real happy that i’ve got involved in the comp scene this year, as i was able to ride in pretty much every UK comp. To me, the most important thing with riding is to have fun! This year has been exactly that. Stoked to of had the opportunity to work with Nico Tuner again and featured in his film, ‘Being free’. For 2012 my aim is to progress even more then this year and produce many more edits!

I had a good year racing the DMR Omen in the hardtail downhill class, I won the hardtail Welsh Downhill Championships, Scottish Alpine Winter Series, English Championships, Caersws Cup Series and North Wales Series 2nd overall (HT Class). The highlight of 2011 was at the Welsh Champs where I won the (HT Class) by 14 seconds with a time that would have put me 4th in senior category. I will be racing to defend titles in 2012 and trying out XFusion forks.


DMR 4X TEAM RIDERS 2012

DUNCAN FERRIS

Suzanne Lacey

OMEN bike / Bolt bike

2011 was another great year of riding bikes, everything from 4X racing and pump track riding to racing DH and Enduro on my new DMR Bolt. I had a pretty average 4X season in 2011 plagued with a few injures and unlucky crashes and although I had some terrible results I still had loads of fun. I’ve also raced a few Down Hill races on the new DMR Bolt, the highlight of the season being a 3rd place at a British National DH (on a 125mm bike!). Braking my collar bone at the Megavalanche was maybe the low point to the season but i’d done so much great riding in the Alps leading up to the crash I couldn’t be too disappointed.

OMEN bike

The biggest highlights of 2011 was racing 4X world cups in Fortwilliam and Leogang as well as becoming the overall winner in the NPS 4X series for the second year running and also being supported by DMR bikes. My aims for 2012 are to progress my racing to new levels and to top 10 in the 4x world cups which i compete in. Also to race as many different disaplines as possible and to have alot of fun doing it.

2012 sees a new exciting direction for 4X and loads of new races to get my teeth stuck into, and as usual I can’t wait for the new season to start! - Cheers Duncan.

DMR FLOW RIDERS 2012

Sam Reynolds

Bernard Kerr

JAMIE JOHNSON

Vault pedals, Muta grips, Void SLM saddle, Tilt Seatpost, tyres

Bolt sample build, Vault pedals, Muta grips and Void saddle.

898 bike (26”)

TOM REYNOLDS

JAMES IOANNOU

RICHARD Acott

898 bike (26”)

898 bike (26”)

Omen bike, OMEN DH sample and Bolt frame

19 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


DMR 898 DIRT MAGAZINE AD.


BIKES 898 REFINED. PROLEVEL. LOADED

ÂŁ1199.99 Our ultimate Dirt Jump bike, the 898 is competition proven at the toughest events. The DMR team (past and present) ride a set up with this bike at its core. The 898 bike build is fully loaded with the best DMR parts. Fully heat-treated frame with tapered head tube Marzocchi DJ 2 forks DMR Wheelset Tektro hydraulic brakes DMR Oversize Alloy Wingbars DMR Swarm stem DMR Zip grips DMR Supermoto tyres DMR Cult Cro.mo 2piece crankset Microdrive set-up DMR pivotal saddle and seatpost DMR V8 pedals MetGry only (Deep Metallic Grey) Bike specification may change without notice

898 BIKE

21 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


BIKES OMEN FAST. RACEPEDIGREE. GEARED

ÂŁ1499.99 This team issue 4X race bike is based around the Omen frame and is ready to race out of the box. Also ridden to victory at the Scottish, Welsh and English national Hardtail Downhill championships by Richard Accott. Richard will be on board his Omen complete again in 2012. Tange Infinity Cro.mo tubeset with tapered head tube (running change not shown in photo). Marzocchi 4X 100mm forks with 20mm axle Truvative Ruktion crankset with full chain device DMR Thret wheelset with sealed bearing hubs Tektro hydraulic brakes DMR Redshift tyres Microshift CNC rear mech, short block and alloy trigger shifter DMR Void saddle DMR Tilt seatpost DMR Grab seat clamp DMR Oversize Alloy Wingbars DMR Swarm stem DMR Zip grips Deep Red only Bike specification may change without notice


REPTOID 9SPD TOUGH. PROVEN. GEARED

ÂŁ799.99 The Reptoid complete bike upgraded to a 9 speed set up. Heat treated down-tube and gusseted head tube 80mm Marzocchi DJ forks DMR alloy Wingbars DMR Zip grips Tektro disc brakes DMR DeeVee wheels DMR Supermoto tyres DMR Squid saddle with Pivotal post DMR V8 pedals Anodised hubs and chain wheel Sealed bearing rear hub Microshift shifter/mech Truvativ chainset and a full chain device Bike specification may change without notice

23 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


BIKES Reptoid TOUGH. PROVEN. LOADED

£749.99 The Reptoid features some of our latest products and rides as good as it looks. 24” and 26” wheeled versions are available Heat treated down-tube and gusseted head tube NEW 80mm Marzocchi DJ forks (not pictured) 3pc Cro.mo crank DMR Cro.mo Wingbars DMR Zip grips Tektro disc brakes DMR DeeVee wheels DMR Supermoto tyres NEW DMR Void pivotal saddle DMR Acid V8 pedals Anodised hubs and chain wheel NEW DMR sealed bearing cassette rear hub

Bike specification may change without notice


DRONE TOUGH. PROVEN. COMPETITIVE

£549.99 Designed for street and dirt riding, the Drone is built to a price but with a full Cro.mo 4130 frame with a heat treated down-tube and full Cro.mo fork it is tough enough to take the hits. Ideal for the younger rider or someone on a budget that wants to get into dirt and street riding, the geometry is suitable to upgrade to a short travel suspension fork, its hubs are disc ready too 24” and 26” wheeled versions are available Heat treated down-tube and gusseted head tube 3pc Cro.mo crank DMR Cro.mo Wingbars DMR Zip grips DMR Moto Digger tyres NEW DMR Void pivotal saddle DMR Acid V8 pedals Anodised hubs and chain wheel NEW DMR sealed bearing cassette rear hub

Bike specification may change without notice

25 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


FRAMES Bolt

If you’re looking for a versatile thrasher the BOLT is it.

FULLY SUSSED. GEARED. SINGLESPEED. 125MM TRAVEL

Single BB pivot to allow single speed set ups. 125mm travel Custom tuned X-FUSION O2 RCX Air shock with 3 compression options (200x57) Heat-treated, 4130 Cro.mo Steel Tapered headtube Ultra high load, spherical bearing, shock pivot Swing-link joint for added lateral rigidity ISCG05 Mounts Adaptable ‘Swopout’ dropouts, switch between horizontal ,vertical or 12mm dropouts Short chainstays 120 -150mm fork geometry

£899.99 The Bolt rides like one our 26”hard tails but when you need it, the Suspension is there. The Bolt frame was originally conceived as a Dirt jumper, but over a few prototypes with the Team riders input we’ve developed it into a broader ‘play-bike’ that can be set up for Downhill or Bikepark type riding. Its sort of like a full suspension Trailstar in character. Like all DMR frames it’s made from 4130 Cro.mo steel, we use steel for its excellent toughness and durability. The frame is BB pivoted allowing it to be set up as a single speeder or it can be built with gears by switching the DMR Swopouts to suit. The BB pivot makes for an active suspension system for DH riding, the X-Fusion air shock Comes with a lock out so you can also ride it as a hardtail for dirt-jumping or pump tracks etc.

Aqua Metallic with Magenta anodised parts Black Metallic with Orange anodised parts

The rear triangle is a fully rigid unit pivoted on 2 large bearings in the cast steel BB yoke, this is further supported by a swing link onto the front triangle to make the frame laterally stiff – so it pedals really well… The main shock pivot is mounted on two large spherical bearings to eliminate any play; these bearings are rated at 8000 Kgf so they can take a hammering.

• tapered head tube • SATIN FRONT, Hi Gloss REAR.


Geared (Example Only).

Single Speed (Example Only).

27 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


FRAMES 898 PRO DIRT JUMP. POST WELD HEAT TREATED.

£399.99 The 898 has a tapered head tube which makes for a stronger fork and a stronger frame, which has to be a good thing for a jump bike! Tubeset – custom butted tubing is made from a special steel alloy which after heat treatment is about 40% stronger allowing thinner thickness to reduce weight Head Tube - Taper type is Investment Cast to exactly control wall thickness enabling the strength to weight ratio is optimised and to ensure perfect fit for the internal type headset. (FSA No 42type) 45x45 1 1/8th top bearing and 36x45 1½“ lower bearing Chainstays – are as short as possible for quick handling and easy manuals Dropouts - CNC machined to save weight

MID BB – bigger stronger bearings fit directly into the frame to save weight (no cups) Geometry – DMR gets it right, our frames are fine tuned for serious riding and are world renowned for their perfect trail manners Light but not too light… there is a fine line between a light bike and a bent bike, our new competition DJ frame has the balance of weight vs. reliability our team riders need, its not a frame for the trail novice though…the Drone or Reptoid is the perfect choice for that level of rider What Forks? Our geometry is designed for a short travel fork – max 100mm – or our rigid Trailblade forks. Available in 26” only in a choice of JetBlk (Dark Gloss Black) or MetGrey (Metallic Grey) both include extra graphics designed to fit over the standard seat-tube decal and change the look of your bike. There’s an extra ‘DMRBIKES.com’ decal thrown in, to put wherever you like.


OMEN 4X. GEARED. SINGLESPEED.

£399.99 The Omen frame has been inspired by our Sidekick frame and developed alongside our Elite UCI Four Cross racer Duncan Ferris as the latest 4X race frame, but with Richard Acott aboard it has also dominated the Hardtail category in the Welsh, Scottish and English Downhill championships. Heat Treated Cro.mo Steel, Tange Infinity double butted tubeset for a responsive and tough frame Investment Taper type headtube (running change not shown in photo) ISCG05 Mounts for easy chain-device fitment Adaptable ‘Swopout’ dropouts allow you to run gears or single speed set-ups. Spring / Summer 2012 will see the introduction of the 142mm version of the Swopout system as standard Race proven Geometry, developed with our team riders for speed and precision handling. Designed to ride with 100 – 120mm travel fork the Omen is a versatile frame at home on the track or trails Met Blk (Metallic Black) or Deep Red

• tapered head tube

29 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


FRAME REPTOID TOUGH. VERSATILE. GREAT VALUE.

£199.99 DMR frames have a reputation for strength, great handling, dialled geometry and versatility, the Reptoid frame has all this DMR DNA, but at a killer price point. Full Cro.mo frame with a heat treated down-tube Disc ready 135mm rear hub spacing 26” wheel size only Colours: Gloss Black or White

Photo: Sebas Romero | DMR Drone Rider: Marcel | Upgrind | Barcelona, Spain

Olly Wilkins - Tests the Reptoid


FRAME SPARES

A

B

C

D

SWOPOUT A = £19.99 B,C,D = £24.99

MAXLE® ADAPTORS

The Swopout system is DMR’s frame innovation which allows the selection of 4 types of rear dropout. Swopouts are a standard feature on the Bolt, Omen, Exalt, Sidekick, Trailstar and a few other frame brands including Kinesis Decade and Ragley.

£14.99

For 12mm SwopOut

CHAIN TUG/ MECH HANGER CHAIN TUGS

TRANSITION CHAIN TUG

For DMR and other frames with horizontal dropouts

Converts from 14 to 10mm Allows use of 10mm geared cassette hubs

£19.99

To fit 10mm or 14mm axles 14mm - £17.99

£19.99

10mm - £17.99

WONDER CUPS Converts BMX BB shell to MTB Will work with a 68mm standard BB

DMR NUTZ

Forged alloy replacement for DMR frames

108g Black

14mm or 10mm, 7075 alloy nuts and washers Blue, Purple, Green, Brown, Gold, Red, Grey and Black

£15.99

£19.99

VERTICAL DROPOUT

GRAB

SEAT CLAMPS

Single bolt Seatclamp 28.6mm, 30.0mm, 31.8mm, 34.9mm Purple, Blue, Grey, Green, Black or Red

Single bolt or double bolt versions

£11.99

£5.99

£4.99 per wheel

CHAINSTAY PROTECTORS Will work with most frame designs Red, Blue, Grey, Black and CMYK

£6.99

31 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


FORKS

OW FORK Superlight Full Heat Treated fork - 1070gms

ÂŁ119.99 Triple butted and tapered Cro.mo blades with a fluted and CNC machined steerer A full pound lighter than the Trailblade. Made from a steel alloy which after heat treatment is about 40% stronger than standard Cro.mo allowing thinner wall thickness to reduce weight significantly. Graphics by DMR team rider Olly Wilkins. Black or White 9mm Disc mount only

DMR team rider Olly Wilkins is pretty handy with the bike, he’s also a talented artist. Inspired by Brighton artist Sanna Annukka, he has designed these fresh fork graphics. It will be the first of many collaborative projects with team riders.

Photo: Grant Robinson


TRAILBLADE Trailblade forks have been developed over several years to be the strongest rigid fork available. 3 versions of Trailblade fork are available and all feature: Oversized double butted 4130 Cro.mo tubing and steerer 440mm crown height = 100mm suspension fork Disc hose mounts and clips

TRAILBLADE20 Accept only the best fork for your bike!

£149.99 The ultimate version featuring full heat treatment and 20mm 4bolt dropouts for maximum stiffness. Full post welding heat treatment Alloy 20mm through axle and bolts Disc brake only Black or White

canti bosses

without canti bosses

Lightweight when compared to most dirt jump forks To use with standard front hubs Available with or without canti bosses (for 26”) Black or White

canti bosses

£79.99

without canti bosses

TRAILBLADE9

33 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


PEDALS

Ultra low profile

17mm with concave foot bed

Vault WIDE. LIGHT. SLIM. TOUGH. TUNEABLE

£99.99 Chrome - £104.99 The DMR Vault is the next generation of the classic V8 and V12 family. LARGE – 105mm x 115mm LIGHT – 400gms per pair SLIM – 17mm concave foot bed TOUGH – extruded 6061 aluminium and 4140 Cro.mo steel axles TUNEABLE – 11 pins per pedal or bolt pins can be fitted to fine tune or increase the grip SERVICEABLE – High load DU bush and cartridge bearing Blue, Green, Orange, Red, Magenta (Ltd Stock), White, Black, Grey, Silver and Chrome.

VAULT NEWS - Vault MAG If all goes to plan in Spring 2012 we should be introducing the VAULT Magnesium pedal which will weight a estimate 300g a pair. Keep a eye out for more updated news at upgradebikes.co.uk

FLIPPINS

DMR PEDAL SERVICE TOOL

£9.99

For VAULT, V12MAG and V12 pedals.

FlipPins allow tuning of Vault pedal grip and feel Run them ‘thread up’ or ‘head up’ to get the combination that is right for you. Black, Silver, Gold, Red and Blue.

Designed to easily remove and fit bearings into your pedals

£15.99


VAULT TITANIUM AXLE KIT

VAULT CRO.MO AXLE

£89.99

£6.49

Left and right titanium axle kit 85kgs rider weight limit

Left and right replacement axle kit

VAULT REBUILD KIT £38.99 All you need to fully service and overhaul your pedals. Excludes axles

35 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


V12 PEDALS

V12 MAGNESIUM

V12

Die-cast from magnesium alloy which is 30% lighter but just as tough.

100% exclusive DMR design

£69.99

£49.99

Show Chrome = £54.99 Cro.mo axle and a tough 1 pc body.

Diamond Black, Pure White, Oxblood or Steel 434g (354g when fitted with optional titanium axl

Diamond Black, Pure White, Polished, Code Red, Vivid blue, Irish green or Show Chrome. 536g

V12/V12MAG REBUILD KIT £38.99 All you need to fully service and overhaul your pedals. Excludes axles

V12/V12MAG TITANIUM AXLE KIT £69.99 Left and right titanium axle kit 85kgs rider weight limit

DMR PEDAL SERVICE TOOL For V12MAG, V12 and VAULT pedals

£15.99 Designed to easily remove and fit bearings into your pedals.

V12/V12MAG CRO.MO AXLE £6.49 Left and right replacement axle kit

V8/V8MAG REBUILD KIT £19.99 All you need to fully service and overhaul your pedals. Excludes axles


V8 PEDALS

V8 V8 MAGNESIUM

Our top selling product

Lightweight at a competitive price

£27.99

£34.99

Die cast from the same alloy as the V12Mags. Runs on precision ground loose ball bearings. Diamond Black, Pure White, Code Red 428g

V8/V8MAG CRO.MO AXLE £4.49 Left and right replacement axle kit

Runs on precision ground loose ball bearings. Fully serviceable –including ½” (BMX) axles.

Diamond Black, Pure White, Polished Silver, Code Red, Purple, Sick Green, Solid Blue, Acid Red, Acid Blue and Acid Green. 528g

PIMP MY PEDALS

40 coloured pins to pimp up your V12 / V12Mag pedals … pimpin’

£9.99 2 Coloured end caps and Allen key included Purple, Black, Red, Gold, Blue, Green, ‘Rasta’ mix

V8/V8MAG PEDAL SERVICE TOOL £3.99 Designed to easily remove and fit bearings into your pedals

STANDARD PINS £2.99 Screw in Pins to fit DMR pedals

TERROR PINS £3.99

Extra long screw in pins for increased grip.

37 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


ANODIZED RANGE All parts are CNC machined, forged or a combination of the both for the best possible combination of strength, weight, price and surface finish. The surface finish is critical element allowing the anodizing to really stand out on any bike. For other complimentary and matching anodized parts – please see: BARS on page 40 | NUTZ page 31 | Hubs page 53 |

GRAB £11.99 Laser etched graphics Purple, Black, Blue, Green, Red and Grey 28.6mm, 30.2mm, 31.8mm, 34.9mm

TILT £32.99 Forged and CNC machined Internally fluted to reduce weight without sacrificing strength. Purple, Black, Blue, Green, Red and Grey. 200mm length 25.4mm, 26.8mm, 27.2mm


SWARM

25.4 and 31.8mm

25.4mm £39.99 31.8mm £44.99 CNC stem with matching stem cap Internal bore to save weight Heavy duty Cro.mo steel 8mm bolts 55mm extension 25.4mm model in Black, Red, Green, Blue, Purple, Grey 31.8mm version in Black, Red, Blue or Green

SPIN Fits most 3pc cranksets Purple, Black, Blue, Green, Red and Grey 20t, 22t, are ‘nano’ drive £27.99

25t, 27t, 29t are standard BMX style £29.99

XLT SPIN 25T and 28T chainwheels

£32.99 Fits most 3pc cranksets CNC’d in the UK Ultra-lightweight design – 54g Anodised finished Blue, Red or Black

39 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


HANDLEBARS

ALLOY WINGBAR Feature a ‘blast treatment’ in the centre to increase the surface hardness in the stem clamp area for extra stiffness and durability. Heat-treated and double butted 6061 alloy. Tough enough to handle most riding styles. Note: As with all alloy bars we recommend their replacement every 2 years (maximum) or after a heavy fall

STANDARD / 25.4mm £34.99 726mm width, 38mm rise, 7° upsweep, 8° back sweep Black, Silver, Blue, Grey, Green, Purple, Red

OVERSIZED / 31.8mm £39.99 756mm width, 20mm rise, 4° upsweep, 8° backsweep Black, Blue, Red, Green


HEAT TREATED CRO.MO [40mm RISE] Tough steel bar with 5 section butting to reduce weight

£44.99 Heat treated for strength 710mm width, 7° upsweep, 8° degree back sweep 25.4mm only Black, White, Aqua Blue, Grey, Oxblood, Purple

Now available in Grey

HEAT TREATED CRO.MO [75mm RISE] Tough steel bar with 5 section butting to reduce weight

£44.99 Heat treated for strength 710mm width, 5° upsweep, 10° degree back sweep 25.4mm only Black, White, Aqua Blue, Grey, Purple

BRACED CRO.MO Bombproof 4130 Cro.mo steel riser bar

£24.99 Welded cross-bar design for heavier riding styles 75mm rise, 7° up sweep, 8° back sweep and 700mm width Comes with a shim so can be used with either MTB (25.4mm) or BMX (22.2mm) stems Black, White, Solid Blue or Sick Green

41 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


GRIPS

MUTA

Full lock-on type grip for easy and secure fit

£15.99 Not too fat, not too thin, for use with or without gloves. 135mm length Locking flange and lock on end cap Soft ‘Krayton’ grip material is ‘over moulded’ on the lock-on core and 42mm locking flange. Rigid centre core is relieved in the palm section of the grip allowing extra thickness of Krayton for comfort 130g (pair) Code Red, Solid Blue, Sick Green, White, Purple and Black

DMRBIKES repeated pattern


LOCDD Easy to fit and lock on to the bar without damage

ÂŁ11.99 Double D logo pattern is staggered in height to give loads of grip. Available with or without flange Black, White, Purple, Code Red, Sick Green, Solid Blue

ZIP Proven and classic design, thin section, dual density grip

ÂŁ8.49 Tough inner core that resists twisting and movement Grooves for cable ties to lock the grip to the bar Comes with end plugs and cable ties Available with or without flange 70g (incuding End Cap) Black, White, Purple, Code Red, Sick Green, Solid Blue

43 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


SADDLES

Ultra

Void

Ultra small and ultra light

Tough padded mid-sized

£19.99

£21.99

Tough, small and light Front and rear grab areas Compact low profile design 125mm x 220mm

20mm of lightweight foam padding 130mm x 245mm

Ultra [GASSED]

Black with Metallic Acid Drops Hi Gloss White

Ultra [CASSETTE] Black Veined White Microdot

Magenta / Solid Blue Black Stitched / White Solid Blue / Hi Gloss White Flat Grey / Black Veined


Void [SLM]

Void [pivotal]

Lightweight and Slim mid-sized

Pivotal, lightweight, Slim mid-sized

ÂŁ26.99

ÂŁ28.99

Special high density thin foam gives a low profile 130mm x 245mm

Popular Pivotal style, midsized dirt jump saddle Thin foam equals lightweight and low profile 130mm x 245mm

Black Stitched Hi Gloss White Soft Purple Solid Blue

Black Stitched Hi Gloss White

45 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


PIVOTAL SADDLES AND POST Void [pivotal] Pivotal, lightweight, Slim mid-sized

£28.99 Popular Pivotal style, midsized dirt jump saddle Thin foam equals lightweight and low profile 130mm x 245mm Black Stitched Hi Gloss White

LOCKJAW SEAT POST Our seatpost is now lighter and can be slammed in the frame to run the saddle lower than before. 3D forged alloy with new low profile head Sizes: 26.8mm, 27.2mm

£24.99


SQUID Lightweight see-through Pivotal saddles.

£21.99 Translucent high density Polyethylene Simple, lightweight and strong – no saddle rails to bend 215mm long by 120mm wide 228g Clear/Red Clear/Blue Clear/Green

47 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


TYRES (qty breaks, mix from all tyres 6/12 or 25 Bundle one product code) TRANSITION Heavy duty tyre specifically for street and skatepark riding Double ply carcass stiffens up the tyre and improves impact protection Dense tread pattern is fast rolling with a round profile Pattern wraps bead to bead adding further protection to the sidewall The tread height varies across the section giving loads of grip without ‘squirm’ on hard surfaces

£19.99 780 grams £19.99 820 grams £19.99

24” x 1.9” Wire bead 750 grams 24” x 2.2” Wire bead 26” x 2.2” Wire bead

SUPERMOTO Our lightweight, fast rolling Dirt Jumping tyre Compact and aggressive low profile tread give firm positive grip on hardpack dirt and street terrain. Knurled ‘micro – grip’ contact surface for skate-park type riding Round profile with slightly taller shoulder blocks for extra bite in the berms Low block height reduces weight and makes the tread blocks stiffer giving better bite Available in Skinwall or Blackwall versions

NATURAL SKINWALL 24” x 2.1” Wire bead 660 grams £22.99 26” x 2.1” Folding bead 580 grams £32.99 26” x 2.1” Wire bead 750 grams £22.99 BLACK SKINWALL 24” x 2.1” Wire bead 660 grams 26” x 2.1” Wire bead 750 grams

£19.99 £19.99

MOTO R/T DMR’s best selling tyre for street riding, hard pack trails and dirt jumps Directional tread pattern with deep tread blocks Closely spaced with a round profile for street and with enough space for grip on the trails. 24”x 2.2” 24”x 2.4” 26”x 2.2” 26”x 2.2” 26”x 2.4”

£22.99 Wire bead 760 grams £22.99 Wire bead 870 grams £22.99 Folding bead 810 grams £29.99 Wire bead 900 grams £22.99 Wire bead 720 grams


MOTO DIGGER Dirt specific tyre for looser, softer conditions, Based on a classic motocross block pattern Staggered shoulder blocks dig into berms or loose dirt Round profile gives predictable high speed, low angle cornering

£22.99 24” x 2.35” Wire bead 706 grams £22.99 26” x 2.10” Wire bead 680 grams £22.99 26” x 2.35” Wire bead 855 grams £22.99 26” x 2.35” Folding bead 800 grams £29.99 24” x 2.10” Wire bead 660 grams

REDSHIFT An aggressive off-road tyre for loose or wet conditions Large volume with a big footprint for maximum grip Aggressive staggered shoulder blocks bite the dirt. Fast rolling, lightweight single-ply construction. 26” x 2.0” 620 grams Wire bead 26” x 2.35” 700 grams Wire bead

£15.99 £15.99

Rider: Olly Wilkins//Photo: Grant Robinson

49 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


WHEELSETS Build Quality and Spare Parts DMR 2012 Wheelsets

All the wheels include DMR rim tape (in red and black of course!) and are built to the same high quality and hand finished to high standard; stress relieved and re-tensioned to ensure a durable tough wheel.

All our wheels are designed to be tough and good value, they are available individually allowing a mix and match approach. The range provides a choice of wheels for dirt jump, street riding, downhill or freeride use.

The black rims and spokes with deep red anodized hubs look the business too. We carry all the service parts as spares so you can be confident these wheels will keep rolling.

DMR NUTZ 14mm or 10mm, 7075 alloy nuts and washers Blue, Purple, Green, Brown, Gold, Red, Grey and Black

£4.99

20 - 9mm QR ADAPTER £22.99 Pro front wheels feature a convertible front hub, they come built with 20mm through axle Fits all front Pro wheels (24” and 26”)

24” COMP 9SPD REAR

24” COMP Front

ATOMLAB or DMR Rim

+

ATOMLAB or DMR Hub


24” WHEELS

26” WHEELS

COMP FRONT

DEEVEE rim

9mm nutted axle

1235g

COMP 9spd REAR

DEEVEE rim

10mm nutted axle

1450g

PRO FRONT

DEEVEE rim

20mm thru axle

1100g

DEEVEE rim

Short Block cassette 1590g

PRO 1SPD TO 6SPD

£99.99 £109.99 £129.99 £139.99

NOTE: Pro wheelsets feature cartridge bearing hubs whilst the Comp wheels run on loose ball type hubs. Pro 26” wheels have the choice of Black or Red hubs and matching nipples. Comp wheels have Red hubs. (All wheels have Black spokes).

COMP FRONT

DEEVEE rim

9mm nutted axle

1310g

PRO FRONT

Thret rim

20mm thru axle

1215g

COMP 9SPD REAR

DEEVEE rim

10mm nutted axle

1510g

PRO 9SPD REAR

Thret rim

10mm bolted axle

1545g

PRO 1SPD to 6SPD

Thret rim

Short Block cassette 1590g

£99.99 £129.99 £109.99 £139.99 £139.99

BIKE RADAR ‘ DMR have alegendary reputation for rock solid dirt products and their Pro wheels are no exception’. ‘The double eyelets and deep box-section construction has taken all the abuse we’ve thrown at them without flinching’

26” PRO 1SPD to 6SPD

26” PRO Front

+

ATOMLAB or DMR Spokes

=

CUSTOM WHEEL BUILD PROGRAM Choose any DMR or ATOMLAB rim / hub combination with a choice of spokes and nipples we will hand build your dream wheelset. See page 315 for all the details

51 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


REVOLVER HUBS

20 - 15mm

20 - 9mm

FRONT 20mm CONVERTIBLE Light enough for cross-country yet strong enough for downhill and free ride

£54.99 Forged body and CNC machined alloy axle Double sealed cartridge bearings Adapters available to convert to 15mm through axle or 9mm QR. 32h - Grey, Black, Red, Purple, Green, Blue 36h - Black, Red 208g

20mm HUB CONVERTERS

FRONT 9mm DISC

(QR NOT INCLUDED).

Strong, well sealed, beautifully finished and excellent value

£14.99

£49.99

20mm > 15mm Hub Converter 20mm > 9mm Hub Converter Black or Red

Sealed bearings and an internal double lip seal 32h, 36h - Black

SINGLE SPEED - SCREW-ON FREEWHEEL

SINGLE SPEED - 6PAWL MINI CASSETTE

Perfect for dirt jumpers, trail riders or die hard single speeders

The ultimate single speed hub

£54.99

£109.99

Nutted10mm Cro.mo axle 135mm spacing with sealed cartridge bearings Mini freewheel: 32h - Black, Red (288g). Standard freewheel: 32h, 36h - Black, Red (369g).

6pawl mini cassette and sprockets shrink the drive train down Includes 11t sprocket (9t and 10t available) 36h - Black, Red, Blue, Grey, Green, Purple, 32h - Black 480g

10mm >14mm ADAPTERS

MINI CASSETTE SPROCKETS

Screw on Cro.mo 10mm to 14mm axle converters

£9.99 Will work with any 10mm nutted axle Will fit frames and forks with 14mm dropouts

£6.99 9t, 10t or 11t


SHORT BLOCK – 1SPD TO 6SPD CASSETTE

9SPD CASSETTE DISC

Short cassette body can take 1 to 6 Shimano pattern sprockets

Lightweight and excellent value

£74.99

£62.99

Zero dish build for maximum strength Cro.mo nutted axle for strength and security Sealed, heavy duty, fully serviceable cartridge bearings 32 or 36h - Black, Red

Proven; 3 pawl ratchet mechanism and steel cassette body Sealed bearings with internal double lip seal for a good barrier against water and dirt 32 or 36h - Black, Red 385g

FREE HUB BODY £29.99

FREE HUB BODY £29.99

9SPD 6PAWLCASSETTE DISC – 12mm Heavy-duty bolt through type rear cassette hub

£99.99 9SPD 6PAWL CASSETTE DISC The pawls are placed inside the hub shell, allowing the free hub to run on larger cartridge bearings and the pawls work on a much larger surface area therefore reducing stress

Same great features as hub above. 135mm, 142mm or 150mm 12mm alloy through axle and nuts included 36h - Black

£109.99 Lightweight; forged hub shell with 7075 axle Reliable; 6 pawl internal design with 5 sealed bearing support 32 or 36h - Black, Red 345g

FREE HUB BODY £29.99

FREE HUB BODY £29.99 DMR NUTZ

142mm AXLE CONVERSION KIT Axle kit to convert a 6pawl cassette hub to 12mm x 142mm

£9.99

14mm or 10mm, 7075 alloy nuts and washers Blue, Purple, Green, Brown, Gold, Red, Grey and Black

£4.99 per wheel

53 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


RIMS

Thret

RIM TAPE

DISC ONLY. LIGHTER. STRONGER. Premium disc only rim, the rim section is the perfect balance of strength and weight

Available for 24” and 26” rims

£3.49

£39.99 25mm width, suitable for all mountain, trail bikes, 4X and pro dirt jump 26” only; Disc brake specific Stainless Steel spoke eyelets Anodised finish with laser graphics 32h - Black, Polished , Grey, Blue 36h - Black 32h - Black (Atomlab oversized torque nipple version). 510g

for 2012 New laser graphics.

DEEVEE Disc or V-Brake rim with the look of a disc only type rim Double wall section and eyeleted for strength

£34.99 24” 620g 32h - Black, Green, Silver 36h - Black 48h - Black 26” 700g 32h - Black, Green 36h - Black


CRANKSETS

Includes Crank Tool

CULT Lightweight 2pc Cro.mo design

£129.99 Proven, 48 spline axle and 4 bearing Euro BB Bolt drive for standard or nano chainwheels MID BB available separately Black, White, Fluoro Green, 170 or 175mm 809g

SICK GREEN CULT CRANK, CRO.MO WINGBARS, GRIPS AND V8 PEDALS

MID BB Ideal for the New DMR 898 Frames

£29.99

EURO BB £29.99

Wonder Cups Converts BMX size BB shells to MTB

£19.99

Choose any DMR or ATOMLAB Rim

+ DMR or ATOMLAB Hub

+ ATOMLAB or UPGRADE Spokes

CUSTOM WHEEL BUILD PROGRAM Choose any DMR or ATOMLAB rim / hub combination with a choice of spokes and nipples we will hand build your dream wheelset. See page 315 for all the details

SPOKES

Atomlab Spokes See page 10 and for Upgrade Bikes Spoke page 314

55 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


CHAINWHEELS SPIN XLT 25t and 28t Chainwheels

£32.99 Fits most 3pc cranksets CNC’d in the UK Ultra-lightweight design – 54g Anodised finished Black, Blue and Red

SPIN Fits most 3pc cranksets Laser etched graphics 20t, 22t, are ‘nano’ drive

£27.99 £29.99

25t, 27t, 29t are standard BMX style

Saturn Ring 4-Bolt or 5-Bolt Heavy duty non-shifting front chain-rings Compatible with 8 or 9 speed chain FROM

£7.99

Call Upgrade Bikes 01403 711 611 for more info.

Spline Drive Compact Chainwheels Fits ExType crank Offset to work with external BB types FROM

£14.99

Call Upgrade Bikes 01403 711 611 for more info.


SINGLE SPEED COMPONENTS

Tension Seeker 2

SIMPLE TENSION SEEKER - STS

Sprung XC Singlespeed Tensioner

Top seller; simple to fit, set up and adjust

£39.99

£19.99

Sealed bearings, alloy pulley, anodized finish and laser etched graphics Can be tensioned up or down 116g Black or Silver

Stainless steel arm and tough PU roller with sealed bearings Fit and forget, once fitted it stays put 103g

STS Combo Kit All you need to convert to single speed

£35.99 The Singlespeed spacer kit and the STS tensioner Black, Silver, Red, Green, Blue, White

Easy and effective way of converting to single speed

PU Pulley & Bolt

REACT 2 STEPPED PULLEY & BOLT

£16.99

Tough durable free running pulley

Tough durable free running dual pulley

Single Speed CassETTE SPROcKET

Single Speed Spacer Kit

12, 13, 14, 15, 16 or 18T

£5.99

Alloy spacers sandwich a 16t cog, replacing your entire cassette 87g

£9.99

£9.99

57 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


CHAIN DEVICES

VIRAL [CAGED VERSION]

VIRAL [BASHGUARD VERSION]

Tough and fully adjustable

Tough and fully adjustable

£79.99

£79.99

Compatible with 28t to 38t chainrings For use without a bashguard CNC alloy upper back plate and tough stainless steel lower section adjust independently allowing fine tuning to suit frame and set-up Toughened nylon guides with precision bearing pulley wheel keeps the chain locked on Includes adapter for frames without ISCG05 mounts

Compatible with 28t to 38t chainrings For use with a bashguard CNC alloy upper back plate and tough stainless steel lower section adjust independently allowing fine tuning to suit frame and set-up. Toughened nylon guides with precision bearing pulley wheel keeps the chain locked on. Includes adapter for frames without ISCG05 mounts

214g Black, Blue, Red, Green, Orange

214g Black, Blue, Red, Green, Orange

VIRAL ICSG ADAPTER PLATE For frames without ISCG05 mounts

£16.99


VIRAL UPPER [CAGED VERSION]

VIRAL LOWER

Replaces the front derailleur for a 1x9 or 1x10 set up

Tough stainless steel lower guide

£44.99

£44.99

ICSG05 mounting Compatible with 28t to 38t chainrings For use without a bashguard Toughened nylon guide

ISCG05 mounting

97g Black anodised back plate

Options: Toughened VIRAL nylon guide. PU Pulley. REACT2 Stepped Pulley.

VIRAL GUIDES [BASHGUARD VERSION]

VIRAL GUIDES [CAGED VERSION]

£9.99

£9.99

Black or white

Black or white

59 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


CLOTHING & ACCESSORIES

DMR Hoodie £39.99 Music port in front pocket and headphone loops in the hood. Perfect for keeping your tunes in place while riding

Duncan Ferris

DMR RACE JERSEY Technical all mountain race jersey designed in conjunction with Royal Racing.

£44.99 Lightweight, Sweat wicking material with key area venting. Sublimated fade-free printing. Semi-loose fit with lycra cuff.


DMR Tee £14.99 DMR ‘Bolt’ logo printed in vibrant colours on comfortable nice fitting T’s

DMR MUG £6.99 Beautifully crafted from fine china to cradle your favourite hot beverage Dishwasher and microwave safe

DMR Key Ring £2.99 Flexible moulded keyring

DD Stickers £2.99 6 mixed fluoro colours

DayGlo Stickers £2.99 6 mixed fluoro colours

61 please visit your local quality bike shop to order these products, or hit www.upgradebikes.co.uk for more information


MBUK, Dec 2011, Issue 271, DMR Vault Pedal Advert - DMR Rider: Sam Reynolds // Photo: Szymon Nieborak : www.delayedpleasure.com // Product Photo: Dom Mason // Ad: Matt Gray


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.