Buy Your Game Reaper Scope Mounts, Which Are Precision Machined For Benelli, Browning, CVA, Howa, Winchester, Remington, And More Online From Leading Manufacturers
According to dealers and gunsmiths, incorrect or poor mounting of telescopes is one of the major reasons why some rifles do not group accurately, or why telescopes or rifle combinations do not keep their ‘zeros’. The term ‘zero’ refers to a specific distance at which the telescope or rifle is set and where the shooter doesn't need to aim from the spot (higher or lower) to hit it. In other words, it is the distance you hit exactly where you are aiming. Many would argue that an article on setting up telescopes is superfluous because to hit the target, you still have to set for each distance. This is the ideal and target shooters do it on the shooting range where distances are known, where shooting is done to specific counting rings, and where you have enough time to adjust, if necessary. However, it is when you are in the hunting field (and sometimes at some field shooting competitions), or in many cases in law enforcement, where things can start to get troublesome because wild animals or moving targets are not necessarily found at predetermined distances. Sometimes you have enough time to measure the distance and make adjustments, but very often that luxury is not yours. You may still be able to quickly measure the distance to the animal, but for the set, there is no time. Under certain circumstances there is no time for fumbling around at all, you should be able to shoot almost instinctively within five seconds. A telescope needs to be mounted correctly so that the rings do not apply tension to the telescope tube, which could adversely affect the adjustment mechanisms, and it is also essential to buy the right equipment for telescope mounting. The most modern telescopic rifle sights are pre-drilled and prepared for a telescopic base, or with ribbed sections for the accessories. You must buy mounting equipment that is compatible with the design of your telescopic face. If your telescopic face needs mounting rings or scope mounts, you should buy the one with the right inner diameter, as the body of the telescopic face will be mounted inside the ring. For any hardcore hunter, as well as the Military, Sheriff’s Departments, Law Enforcement Agencies, and SWAT team members who use tactical weapons, accuracy is not negotiable and
when they squeeze the triggers, they need to know they will be hitting the target, no matter the circumstances, which is why they often rely on 215 Tactical Tikka scope mounts for their rifles. 215 Tactical is a Game Reaper one-piece scope mount that has been designed for extremity and can be purchased as a straight 0 MOA model for shots out to 500 to 600 yards, or the 21.5 MOA model which is suited for 500 to 1000 plus yard shots with most calibers. Tikka scope mounts are designed with .80” wide rings and each ring has 4 ring screws, which will be grooved out on the outside centerline (or scalloped) to provide more holding power to the mount and unlike two, they act more like four rings. These ring screws are usually .62” long and will engage into the mount with approximately 20 threads per screw for extreme firing power. All ring and base screws are precision machined from top grade, solid Billet Aluminium, and Tikka scope mounts are also designed for right and left-hand firearms. The connecting bar between the rings has also been thinned down to .25” wide by some manufacturers, and put on the centerline of action, to ensure it causes no issues with loading and unloading, regardless of the firearm is right or left-handed. The weight of Tikka scope mounts is four to four and a half ounces, depending on size and height, and are available from leading manufacturers. There are several manufacturers of Tikka scope mounts, but before you buy a product, it is always a good idea to check what others think of the manufacturer and the product, by reading online reviews.
About Us: DNZ Products is a family-owned and operated company situated in Sanford, North Carolina. We design and manufacture high-quality scope mounts and related products. At DNZ Products we take pride in the scope mounts we manufacture and make available to all hunting and gun enthusiasts. We always believe in accuracy and therefore our products can be trusted to deliver maximum results. Our 1-piece and 2-piece scope mounts are ideal for a range of different rifles and will therefore suit the needs of a great number of gun enthusiasts. Our scope mounts are made from the highest quality solid billet aluminum to ensure maximum shock absorption. Our products stand out above the rest and constantly receive positive comments. For more about us please visit https://www.dnzproducts.com.