Mounting Your Rifle-Scope: A Few Tips Thousands of gun and rifle enthusiasts worldwide opt for the DIY option when it comes to the telescopic sight they use on their rifles or gun. The sight, as every shooter knows, sits on top of the firearm and its main purpose is to aid accuracy when you shoot. Accuracy can never be compromised since you often have one chance only at hitting the target – hence the importance of the sight on your firearm and its effectiveness in assisting you to be successful. These telescopic sights are often sold together with the rifle one buys, and it comes mounted; however, many thousands of shooters and hunters prefer to buy a separate sight and then mount it on top of the firearm. It is a preference and for different reasons, different individuals may decide to choose their sight and then mount it. This process requires the correct parts and tools such as the base and its accompanying rings that are installed on top of the firearm with a tool such as a wrench. When you buy your telescopic sight and a separate mounting system, you normally buy a base and either a 1- or 2-piece ring system. Choices between the options are often an individual preference related to, say, weight – hence the growing popularity of aluminum which is lighter than steel even if some reports indicate the steel option may be steadier/sturdier than its aluminum counterpart. The choice is the individual’s and very often made after having spoken to other hunters and shooters. These bases and rings can be bought from a reputable gun shop or retailer, or you may want to order the system via a good website’s online ordering service. This is becoming more popular than ever in the past since online shopping saves buyers a lot of time; it makes it possible to look at different websites all at the same time, in the privacy of your home or office – and you can compare quality and prices. It just makes sense for thousands today to choose this option. A good mounting system is made of a strong, durable material such as steel or, for many the choice, aluminum. If you buy from a good, trusted source you are assured of a quality product that is shipped to you with good instructions on how to go about mounting the base and rings on the firearm’s receiver. Instructions should be followed carefully to be sure you do not sacrifice accuracy which will happen without a good installation. A good retailer always makes sure they offer their buyer the best instruction they can follow during the process. Talk to a trusted retailer, watch videos on the internet – be sure you know what you are doing. If you install a good base and ring system correctly, you have good reason to believe that your sight is mounted to aid the shot accuracy you want. In addition to the manufacturer, or the retailer’s, instructions about the process of mounting your base and rings, the following points, among some, should be considered to make sure you do a good job: Be sure you undertake the process while your firearm is NOT loaded and no ammunition present; it helps to position your firearm in a gun rest or vise; de-grease metal
parts on a new base and then apply a very thin layer of oil to the underside of the base so you help prevent corrosion where it makes contact with the rifle; tighten screws to gradually finish the process so that all screws are virtually tightened at the same time – this helps with even distribution of the parts. The above are a few tips in terms of which rifle scopes are mounted. Dealing with a good service provider remains the most important issue.
About Us: As a family-owned and operated company situated in Sanford, NC we design and manufacture high-quality scope mounts and related products. At DNZ Products we take pride in the scope mounts we manufacture and make available to all hunting and gun enthusiasts. We believe in accuracy at all times and therefore our products can be trusted to deliver maximum results. Our 1-piece and 2-piece scope mounts are ideal for a range of different rifles and will therefore suit the needs of a great number of gun enthusiasts. Our scope mounts are made from the highest quality solid billet aluminum to ensure maximum shock absorption. Our products stand out above the rest and constantly receive a positive comment. For more about us please visit https://www.dnzproducts.com/.