Preparation Is The First Step Towards Success Everybody understands that preparation plays an important part in the success of any activity we partake of. It is certainly true, too, for the hunter and shooter. You make sure you arrive with the most appropriate rifle and the accessories that will support your efforts when you go up against you prey. One of these refers to the scope you have on top of the rifle. The scope allows you to feel confident as you aim and focus on the prey or whatever the target is. Without a good scope, it goes without saying that success can never be guaranteed. Firearms can be bought with scopes attached – or without. In the latter case the hunter or shooter will buy a scope mount for the scope to be attached to and rest on. Many hunters prefer this option, since it allows them to do proper research about their options and the best choices available to them. A scope mount system is required to ensure the scope is attached. This scope mount system – often also called the scope mount – exists, essentially, out of two parts, i.e. the base and the rings. They can be made from either steel or aluminum. That will depend on the manufacturer and their preference as to what they feel is the best to ensure precision and accuracy. A good designer and manufacturer will make sure their customers are offered great products that they can rely on to aid their efforts in terms of which accuracy remains the most important factor, always. Therefore, choosing the correct base and rings for your system is crucial. You want to have a product that attaches easily and is known for shock absorption when the shot is fired. That is why many shooters prefer an aluminum scope mount that is lighter than, say, a steel equivalent which will be heavier and may require greater concentration in terms of accuracy. There are some basics for the hunter and the shooter to consider when they set out to acquire the best, most appropriate scope mount system. Bases are offered in 1- or 2-piece options, which will fit directly to the rifle; a good base will allow no room for movement between itself and the receiver. Rings fit to the bases they correspond with and are offered in a variety of sizes, such as, for example, very low to very high. There are also ring mounts to consider, which are integrated with the base that fits onto the receiver. These systems are fitted onto the rifle’s receiver, and should be done to ensure that the system is solid and allows for no movement between parts, as that will compromise accuracy. Depending on the dealer or retailer one acquires the scope mount from, there will be choices related to, for example, sizes. These sizes differ and can be an option such as, say, 30mm, or 34mm, or 1 inch. These are the standard options. There are more options too, which could be considered non- standard. The important thing for the hunter or shooter to remember is to establish what scope mount would work best with their rifle. It is good to talk to other enthusiasts and consult the dealer, or a gunsmith or someone with knowledge – if you are doing this for the first time. Some of the leading suppliers these days offer their scope mounts on well-run websites, which is a great way of acquiring the scope mount you may well need for your rifle. The best ones send you instructions for an easy DIY process, and they will offer you advice about the best systems for your rifle. It is important, though, to approach and deal with a supplier that offers experience and comes with a good reputation. They are the ones that will offer you a good scope mount system and the guide that will lead you through the process so you have the most appropriate scope mount on top of the rifle – to support the riflescope with regard to accuracy and precision.
About Us: As a family owned and operated company situated in Sanford, NC we design and manufacture high quality scope mounts and related products. At DNZ Products we take pride in the scope mounts we manufacture and make available to all hunting and gun enthusiasts. We believe in accuracy at all times and therefore our products can be trusted to deliver maximum results. Our 1-piece and 2-piece scope mounts are ideal for a range of different rifles and will therefore suit the needs of a great number of gun enthusiasts. Our scope mounts are made from the highest quality solid billet aluminum to ensure maximum shock absorption. Our products stand out above the rest and constantly receive positive comment. For more about us please visit - https://www.dnzproducts.com/.