Tips To Rifle Scope Mounting It's important to know how to mount your rifle scope mount, it is the difference between making a shot or missing it. Many people are intimidated by their rifle scope and knowing how it performs is what matters. Learning how to do it yourself can be beneficial. Why should you learn how to mount your scope? The local gun shops can do it for you. Mounting your scope properly is the first thing you can do to improve performance. Numerous gun shops will assist you with complete precision, but knowing how to do it yourself is also a way to know and understand your firearm. The first step to rifle scope mounting is to have the right tools at hand. This starts with a torque wrench, which is essential and you cannot do without it. You will need a leveling kit, it should be accurate and universal. Gun stabilizers or vices are a must. The next is to purchase the scope mount you want and there are so many to choose from. There are scope ring and base options, which is the most common and basic setup, which you often see on hunting rifles. The base ring is lightweight, made from alloy, and is a variation of the classic base, the bottom half of the scope rings and bases are one piece, rather than two. This is the lightest option and often preferred, adding a few ounces to your overall setup. Rail and scope ring setups involve the use of a single rail that mounts to the gun barrel, you then attach the scope rings to the rail. This is often used by the long-range and tactical shooters, ensuring the scope rings are mounted on the same plane, which aligns the rings perfectly without torquing. You can also adjust these and can choose exactly where you want to place the scope. It is heavier than the scope ring and base option. This option makes it slightly easier to level the rifle scope. Stabilize your rifle in the vice, to ensure your rifle remains stable while you work on it. It should be parallel to the ground. The fourth step is to mount the base. If using a rail, put a coating of oil on the underside before mounting, which will help to prevent corrosion. Make sure you do not get the oil on the mounting screws. Use the manufacturer's recommendations when using the torque wrench. If using a base/ring combo. Follow the above, only mounting the lower half of the ring combo, so you have the horizontal part of the base to set your reference level on. Note that when mountain the base ring setup, you may find that your scope has torquing issues, mounting with a slightly different angle.
This is known as lapping, which is a process designed to ensure the rings don't torque your scope, it involves using a medieval-looking tool. Most people believe you should lap your rings, though this is not advisable as they are precision-made rings. If you have purchased quality rings, then there is no reason to lap them. From here you will want to level your rifle scope. This can be confusing if you are doing it by yourself for the first time, but there are a few ways you can do it, making it easier. The method and technique used are determined by the hardware used to mount the scopes. Some use plumb lines to align crosshairs, others use a bubble level. Always use high-quality levels to ensure the best results.
About Us: DNZ Products is a scope mounts specialist company that operates throughout the United States. This very well-established company offers proudly made in the USA products which are all precision machined, top-grade, billet aluminum products, which are sixty-seven percent lighter than the other one-piece mounts available. DNZ Products offers custom-made mounts, which are made for each firearm, with the added benefit of no moving parts. The company provides ear protection, mounts, camera mounts and so much more. To find out more, visit their website at https://www.dnzproducts.com.