thermadyne product guide by Rapid Welding & Industrial Supplies Ltd

GBP

Contents Thermal Arc Welding Equipment Page Part No W1003605 W1002903

DC Stick + TIG Inverters and AC/DC Machines 161S 175SE

1 2

W1003003 W1003803 10-9326 10-9401 10-3091

175TE 201 TS 250TE 300WTE 400 TS

3 4 5 6 7

10-3099 10-3098 10-9402 10-9403

200 AC/DC 300 AC/DC 220 AC/DC 350 AC/DC

8 9 10 11

W1003186 707079 706114 706124 +706125 10-9405 10-9406 W1000103PP W1000303PP W1000203PP W1000503PP W1000203PP W1000503PP DSA.40 DSW.300/DSW.450

MIG Machines Fabricator 181i Fabricator 200 Fabricator 250 Fabricator 330 Compact and Separate Fabricator 400II Fabricator 450II PowerMaster Plus 320SP Air Cooled PowerMaster Plus 400SP Air Cooled PowerMaster Plus 400SP Water Cooled PowerMaster Plus 500SP Water Cooled PowerMaster Plus 400SP Robotic Package PowerMaster Plus 500SP Robotic Package Digital Torches - Air Cooled Digital Torches - Water Cooled

12 13 14 15 16 17 18 19 20 21 22 23 24 25

10-3089 TIG/HF400A 030104-A-SPTH 10-9330 10-9407 10-9408

Multi Process Machines and Wire Feed Units 400 MST 400 MST HF TIG BOX 400 MST Wire Feed Unit 220 GMS 300 GMS 400 GMS

26 27 28 29 30 31

Refer to Page

Trolleys

Contents Thermal Dynamics Cutting Equipment 1-3835-4 1-1604-4 1-4200-4 1-5130-4 / 1-5131-4 1-1130-4 / 1-1131-4 1-1330-4 / 1-1331-4 1-1730-4 / 1-1731-4 1-1930-4 / 1-1931-4 3-0005

Plasma Cutting Drag-Gun Plus CutSkill 35A CutMaster 12 PLUS - SL40 ATC - 4.5m CutMaster 12 - SL60 ATC - 6.1m / 15.2m CutMaster 20 - SL60 ATC - 6.1m / 15.2m CutMaster 25 - SL60 ATC - 6.1m / 15.2m CutMaster 35 - SL100 ATC - 6.1m / 15.2m CutMaster 40 - SL100 ATC - 6.1m / 15.2m Pak 200

Refer to Page Refer to Page Refer to Page

1Torch Torch Adapter Kits Accessories

33 34 35 36 37 38 39 40 41 42 - 43 44 45 - 47

Tweco Arc Accessories WHF41001 Refer to Page Refer to Page Refer to Page Refer to Page

Auto-Darkening Welding Helmet WeldSkill MIG Torches TWE European MIG Torches Classic Tweco MIG Torches MIG Torch Consumables

48 49 49 49 50

Arcair Air-Carbon Arc Gouging Equipment Arcair Slice Cutting Equipment

51 52

Arcair Arc Accessories Refer to Page Refer to Page General Information Generator Requirments Warranty Information Terms and Conditions Contacts

53-54 55 56 57

WELDING EQUIPMENT

STICK (SMAW) INVERTER

>>>>

50HZ

1 PHASE

>>>

>>>>

161 S 1ph 110/230V Input, 160A Stick Inverter Process Part Number W1003605

STICK LIFT TIG Duty Cycle @ Rated Output 30% @ 160A (230v) 35% @ 100A (110v)

Part No. W1003605

Output Range Dimensions (H x W x D) 10 - 160 Amps 229 x 135 x 394 mm 10 - 125 Amps

Description TA 161S 160 Amp Inverter Package power cord, MMA leads

Net Weight 7.9 kg

List Price £ 553.00

with 50mm dinse connections, operating manual, carry strap & case OPTIONS AND ACCESSORIES 90924 305.050.404 305.050.804 10-9997

Stick Kit (earth cable + clamp, electrode holder and lead) TIG Torch with valve SA17V.4m TIG Torch with valve SA17V.8m 50mm² DINSE TIG Torch Adapter

162.18 79.19 110.86 33.58

Machine Specifications Mains Input Voltage Open Circuit Voltage Protection Factor Warranty Period

Features Dual Voltage Input Power Excellent Portability Thermal Overload Protection with indicator Automatic Arc Control 50mm Output Terminals Lift Start TIG SmartLinkTM Input Power Factor Correction 3

1ph. 110/230v 71V IP23S 2 Years

Benefits Suitable for use on 110 or 230 VAC Weighs less than 8kg and has easy to carry shoulder strap Alerts operator if duty cycle is exceeded or airflow is blocked For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking and creating an inclusion Allow for easy polarity reversal and cable change Provides TIG arc starting without use of high frequency Automatically linking to 110 or 230 VAC 'The greener option' offers a higher output while reducing input power consumption!

1 4

Item Description 1 Amperage Control – the amperage control selects the desired amperage between 10–160A (230v) and 10-125A (110v) 2 Warning Indicator – illuminates if machine overheats causing thermal overload 3 Power ON/OFF indicator 4 Process selection switch. Allows operator to choose output function from ‘Lift TIG’ or ‘Manual Arc’ process

-1-

WELDING EQUIPMENT

STICK (MMA) INVERTER

>>>>

50HZ

1 PHASE

INVERTER

>>>

>>>>

ARCMASTER 175 SE 1ph 230V Input, 175A Stick Inverter with Lift-Start Tig function Process STICK LIFT TIG Part Number Duty Cycle @ Rated Output Output Range W1002903 20% @ 175A (TIG) 5 - 175A (230V) 20% @ 175A (STICK) Part No. W1002903

Dimensions (H x W x D) Net Weight 230 x 130 x 330 mm 6.5 kg

Description TA 175 SE 175 Amp Inverter Power Source, power cord, MMA leads with 50mm dinse connections, operating manual, carry strap & case

OPTIONS AND ACCESSORIES 90924 Stick Kit (earth cable + clamp, electrode holder and lead) 305.050.404 TIG Torch with valve SA17V.4m 305.050.804 TIG Torch with valve SA17V.8m 10-9997 50mm² DINSE TIG Torch Adapter

List Price £ 360.00

162.18 79.19 110.86 33.58

Machine Specifications Mains Input Voltage Open Circuit Voltage Warranty Period

1ph. 230v 65V 2 Years

Features Exceptional Performance Excellent Portability Thermal Overload Protection Easy to Use Cable Fitted 50mm Output Terminals Lift Start TIG Over Voltage Protection

Benefits Smooth stable arc with electrodes to 4mm Weighs less than 6.5kg and has easy to carry shoulder strap Indicator alerts if duty cycle is exceeded or airflow is blocked Simple, user friendly set up and operation Supplied with 230VAC primary cable Allow for easy polarity reversal and cable change Provides TIG arc starting without use of high frequency Full input protection for over voltage Item Description 1 Power on Indicator. Visibly indicates that input power is present 2 Process selection switch. Allows operator to choose output function from ‘Lift TIG’ or ‘Manual Arc’ process 3 Over temperature indicator. Illuminates if machine duty cycle has been exceeded 4 Weld current control (Amperage). Allows operator to set output welding amperage

-2-

WELDING EQUIPMENT

TIG (GTAW) INVERTER

>>>>

1 PHASE

INVERTER

50HZ

>>>

>>>>

ARCMASTER 175 TE 1ph 230V Input, 175A HF TIG Inverter Process STICK LIFT TIG Part Number Duty Cycle @ Rated Output Output Range W1003003 20% @ 175A 5 - 175A

Part No. W1003003

Dimensions (H x W x D) Net Weight 225 x 130 x 330 mm 7.5 kg

Description List Price ÂŁ TA 175 TE Inverter Power Source with 5m electrode lead, 5m work lead, 750.00 3m TIG Torch and TIG Torch consumables kit, operating manual, carry strap & case

OPTIONS AND ACCESSORIES W4012800 Site Carry Case 90924 Stick Kit (earth cable + clamp, electrode holder and lead) W4012700 Torch TIG, 17, 3m, 50mm Dinse with 5/8â&#x20AC;?-18 UNF Male gas fitting 10-9811 Plug for Remote or TIG Torch Button

47.22 162.18 122.40 25.50

Machine Specifications Mains Input Voltage Open Circuit Voltage Warranty Period

1ph. 230v 65V 2 Years

Features Thermal Overload Protection with indicator Adjustable Arc Control

Benefits Alerts the operator if duty cycle is exceeded or fan is blocked

Adjustable Down Slope Control Lift-Start TIG HF Arc Starting

Provides non-contact arc starting that eliminates tungsten or material contamination 2T (Normal) for short weld runs and 4T (Latch) for long weld runs Full input protection for over voltage

Trigger Control Over Voltage Protection

For Manual Arc (Stick) welding - the operator can adjust the arc penetration to eliminate electrode stick For TIG welding - the operator can adjust the time for the weld current to ramp down to eliminate craters Provides TIG arc starting without use of high frequency

Item Description 1 Power on indicator 2 Amperage control - the amperage control selects the desired amperage between 5 - 175A 3 Thermal overload indicator 4 Trigger mode selection switch (TIG process only) 5 Adjustable Arc Control (Manual Arc (Stick) process only) or Adjustable Down Slope Control (TIG process only) 6 Manual Arc (Stick), Lift TIG, HF TIG weld process selection control 7 Eight pin socket for torch trigger switch connection (Remote weld current control is not available) 8 50mm Dinse weld terminals

-3-

TIG (GTAW) INVERTER 1 PHASE

>>>>

50HZ

>>>>

>>>

ARCMASTER 201 TS 1ph 110/230V SmartLinkTM Input, 200A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, 2T/4T Function, Down Slope Timer and Arc Force Control Process STICK LIFT TIG Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight W1003803 20% @ 200A 10 - 200A (230V) 230 x 135 x 445 mm 10 kg 10 - 160A (110V) Part No. W1003803

Description List Price £ TA 201TS Inverter Power Source with 4m electrode lead, 3m work lead, 1200.00 4m TIG Torch and TIG Torch consumables kit, operating manual, carry strap & case

OPTIONS AND ACCESSORIES 10-4016 Remote Foot Control 7.6m lead and plug 10-4014 Remote Hand Pendant 7.6m lead and plug 90924 Stick Kit (earth cable + clamp, electrode holder and lead) W4012700 Torch TIG, 17, 3m, 50mm Dinse with 5/8”-18 UNF Male gas fitting 10-9811 Plug for Remote or TIG Torch Button

298.00 241.25 162.18 122.40 25.50

Machine Specifications Mains Input Voltage Protection Factor Features

1ph. 110/230v SmartLinkTM IP23S Benefits

Dual Voltage Input Power Thermal Overload Protection

Adjustable Down Slope Control Lift-Start TIG HF Arc Starting

Provides non-contact arc starting that eliminates tungsten or material contamination 2T (Normal) for short weld runs and 4T (Latch) for long weld runs Full input protection for over voltage

Trigger Control Over Voltage Protection

Power Factor Correction

'The greener option' offers a higher output while reducing input power consumption! 2

3 4 5

71V 2 Years

Suitable for use on 110 or 230 VAC Alerts the operator if duty cycle is exceeded or fan is blocked with indicator For Manual Arc (Stick) welding - the operator can adjust the arc penetration to eliminate electrode stick For TIG welding - the operator can adjust the time for the weld current to ramp down to eliminate craters Provides TIG arc starting without use of high frequency

Adjustable Arc Control

Open Circuit Voltage Warranty Period

6 7

Item 1 2 3 4 5 6 7 8 9 10

-4 -

Description Power Indicator Light Overheat / Fault Indicator Light 2T/4T Trigger Switch / Hold Stick / Lift TIG / HF TIG Process Switch Down Slope / Arc Force Control Knob 8 Pin Control Socket Positive Weld Output 50 mm Dinse Receptacle Negative Weld Output 50 mm Dinse Receptacle Gas output fitting 5/8"-18 Female Weld Amperage Control Knob

WELDING EQUIPMENT

g Q2 n i m Co 2011

WELDING EQUIPMENT

TIG (GTAW) INVERTER

>>>>

50HZ

3 PHASE

>>>>

>>>

250 TE 3ph 400V Input, 250A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse Process HF TIG LIFT TIG STICK Part Number Duty Cycle @ Rated Output Output Range 10-9326 60% @ 250A 3 - 250 Amps Part No. 10-9326

Dimensions (H x W x D) 372 x 209 x 377 mm

Net Weight 16.5 kg

Description TA 250 TE 250 Amp DC TIG Inverter Power Source with operating manual, primary cable and TIG plug (CO4025)

List Price ÂŁ 2355.00

OPTIONS AND ACCESSORIES Thermal Arc HD Inverter Cart 020218/MT 020258/TH Thermal Arc HD Cooler TIG 10-9996 Remote Foot Control 7.6m lead+plug 010330 RC01 10m Standard Remote Control C04025 5-Pin TIG Plug 10-9840/F Remote Control Plug 10-9997 50mm2 DINSE TIG Torch adapter 304.090.404 SA.26.4 TIG Torch

578.00 1153.00 298.00 407.41 32.57 91.41 33.58 103.07

Machine Specifications Mains Input Voltage Protection Factor

3ph. 400v IP23

Open Circuit Voltage Warranty Period

65V 2 Years

Features

Benefits

Smart LogicÂŽ Thermal Overload Protection with indicator Simple to use Control Panel Interface Remote Receptacle Lift-Start TIG HF Arc Starting TIG Pulser & Sloper

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked All functions and controls are easily set through robust easy to use push button switches Allows remote devices to be connected for controlling amperage and output contactor Provides TIG arc starting without use of high frequency Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control

15 12 11

10 8

1 Please note:

Item

Description

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Selection key for Stick or TIG mode Stick / TIG mode indicator Pulse current controls Selection key for HF or Lift Arc TIG HF ignition indicator Selection key for 2 stroke or 4 stroke operation 2 stroke or 4 stroke mode indicator Selection key for pre-gas time Selection key for post-gas time Selection key for up slope time Control button for down slope time Output control potentiometer Amperage or voltage display indicator Amperage or voltage selection key Thermal overload and phase down indicator Digital meter display

To fit a mono cable style TIG torch to this unit for TIG welding you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997) -5-

50HZ

3 PHASE

>>>>

>>>

>>>>

300 WTE 3ph 400V Input, 300A Digital DC Waveform, Tig & Stick Inverter with fully integrated Water Cooling, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse Process HF TIG LIFT TIG STICK Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight 10-9401 40% @ 300A 3 - 300 Amps 460 x 280 x 577 mm 27 kg 60% @ 250A Part No. Description List Price £ 10-9401 TA 300 WTE 300 Amp Inverter Power Source with fully integrated 4352.00 water cooling system with operating manual, primary cable and TIG plug (CO4025) OPTIONS AND ACCESSORIES 020212/SA Universal Trolley 357.00 10-9996 Remote Foot Control 7.6m lead+plug 298.00 010330 RC01 10m Standard Remote Control 407.41 C04025 5-Pin TIG Plug 32.97 10-9840/F Remote Control Plug 91.41 10-9997 50mm2 DINSE TIG Torch adapter 33.58 302.060.404 SA.20.4 TIG Torch 125.78 7-3580 Coolant 20.75

Machine Specifications Mains Input Voltage Protection Factor

3ph. 400v IP23

Features

VRD Parameter memory settings

F15 F16 F17 F18 F1 F19

F8 F3

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked All functions and controls are easily set through robust easy to use push button switches Protects torch from damage due to coolant blockage or cooling system malfunction Allows remote devices to be connected for controlling amperage and output contactor Provides TIG arc starting without use of high frequency Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable) Gives memory programmes which can easily be saved and recalled to give job settings to the operator at the push of a button Item Description F26 F1 Setting key MMA, TIG, 2/4 stroke F14 Indicator 4 stroke TIG welding F2 SET UP setting key F15 Indicator A current on F8 display F2 F9 F27

F10

F22

F23

F21 F20 F7

50 - 60V 2 Years

Benefits

Smart Logic® Thermal Overload Protection with indicator Simple to use Control Panel Interface Coolant Flow Protection Remote Receptacle Lift-Start TIG HF Arc Starting TIG Pulser & Sloper

F12 F13 F14

Open Circuit Voltage Warranty Period

F4 F5

Please note:

F11 F25 F24 F6

F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13

Pulse ON/OFF setting key Low current adjustment key Pulse frequency adjustment key Post gas, final current set key Pre-gas, initial current, upslope Digital display Digital display Parameter adjustment knob Downslope time adjustment Indicator MMA Welding Indicator 2 stroke TIG welding

F16 F17 F18 F19 F20 F21 F22 F23 F24 F25 F26 F27

Indicator ‘%’ on F8 display Indicator ‘time in s’ on F8 display Indicator ‘Hz’ on F8 display Indicator ‘mm’ on F8 display Indicator ‘pregas duration’ Indicator ‘initial current’ indicator ‘up slope time’ Indicator ‘Pulse mode’ ON Indicator ‘final current’ Indicator ‘post gas duration’ indicator main supply default Indicator cooler unit default

To fit a 3 piece water cooled TIG torch to this unit for TIG welding you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997) -6-

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

TIG (GTAW) INVERTER

>>>>

50HZ

3 PHASE

>>>>

>>>

ARCMASTER 400 TS

3ph 380/415V Input, 400A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse Process HF TIG LIFT TIG STICK Part Number Duty Cycle @ Rated Output Output Range 10-3091 25% @ 400A 5 - 400 Amps Part No.

Dimensions (H x W x D) Net Weight 420 x 210 x 450 mm 21 kg

Description List Price £ TA 400 TS 400 Amp DC TIG Inverter Power Source 4170.00 with operating manual, primary cable, TIG plug (10-2096) and cable clamp (10-2097)

10-3091

OPTIONS AND ACCESSORIES CRT.ARCM3.1 ArcMaster 3.1 Workshop Cart WC.ARCM3.1 ArcMaster Cooler 10-2007 Remote Foot control 7.6m lead and plug 10-2005 Remote Hand Pendant 7.6m lead and plug 10-2096 14 Pin Plug for Remote or TIG Torch Button 10-2097 Cable Clamp for 14 Pin Plug 304.090.404 SA.26.4 TIG Torch

422.00 1080.00 378.03 249.01 45.79 7.67 103.07

Machine Specifications Mains Input Voltage Protection Factor

3ph. 380/415v IP23S

Open Circuit Voltage Warranty Period

65V 3 Years

Features

Benefits

Smart Logic® Thermal Overload Protection with indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked

Programmable Lift-Start TIG Hot Start HF Arc Starting TIG Pulser & Sloper Parameter memory settings

All functions and controls are easily set through robust easy to use push button switches Allows remote devices to be connected for controlling amperage and output contactor Alerts operator of power supply abnormalities VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable) Allowing for 5 welding programmes to be saved for maximum flexibility as standard features Provides TIG arc starting without use of high frequency For STICK welding - Provides ease of arc starts Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control Gives memory programmes which can easily be saved and recalled to give job settings to the operator at the push of a button

1 2 4

6 5

Item Description 1 Pulse Function - enables the TIG current pulse functions 2 Scroll Buttons - Used to select the parameter to be set. The LED’s show which function is being adjusted on the Sequence Graph 3 TIG Mode Functions - Pressing this button scrolls through the output TIG function models (Standard, Slope, Slope w/repeat, Spot) 4 Digital LED Display - Welding amperage and parameter values are displayed in this window. internal warnings such as over temperature, low or high input voltage applied are signalled to the operator by a warning sound and error message on the screen 5 Save/Load Buttons (400 TS) - By using the Save & Load buttons the operator can easily save up to 5 welding parameter programs 6 Process Button - This button selects between STICK, HF TIG or Lift TIG mode 7 Control knob - Allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value

-7-

50HZ

1 PHASE

>>>>

AC > >>>DC

>>>>

ARCMASTER 200 AC/DC 1ph 230V Input, 200A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

Process Part Number 10-3099

HF TIG LIFT TIG STICK Duty Cycle @ Rated Output Output Range 25% @ 200A 5 - 200 Amps 40% @ 160A

Part No. 10-3099

Dimensions (H x W x D) 360 x 180 x 420 mm

Description TA 200 AC/DC 200 Amp TIG Inverter Power Source with operating manual, primary cable and Tig plug (10-9811)

Net Weight 17 kg List Price £ 3250.00

OPTIONS AND ACCESSORIES 020212/SA Universal Trolley 10-4016 Remote Foot control 7.6m lead and plug 10-4014 Remote Hand Pendant 7.6m lead and plug 10-9811 Plug for Remote or TIG Torch Button 304.090.404 SA.26.4 TIG Torch

357.00 298.00 241.25 25.50 103.07

Machine Specifications Mains Input Voltage Protection Factor

1ph. 230v IP23S

Open Circuit Voltage Warranty Period

65V 3 Years

Features

Benefits

Smart Logic® Thermal Overload Protection with indicator Simple to use Control Panel Interface Remote Receptacle

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked

Warning Circuitry VRD Lift-Start TIG HF Arc Starting TIG Pulser & Sloper Parameter memory settings

Gives memory programmes which can easily be saved and recalled to give job settings to the operator at the push of a button

All functions and controls are easily set through robust easy to use push button switches Allows remote devices to be connected for controlling amperage and output contactor Alerts operator of power supply abnormalities VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable) Provides TIG arc starting without use of high frequency Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control

Item Description 1 Pulse Function - Pressing this button enables the TIG current pulse functions 2 Scroll Buttons - Used to select the parameter to be set. The LED’s show which function is being adjusted on the Sequence Graph. 3 TIG Mode Functions - Pressing this button scrolls through the output TIG function models (Standard, Slope, Slope w/repeat, Spot) 4 Digital LED Display - Welding amperage and parameter values are displayed in this window. internal warnings such as over temperature, low or high input voltage applied are signalled to the operator by a warning sound and error message on the screen 5 Control knob - Allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value 6 Process Button - This button selects between STICK, HF TIG or Lift TIG mode 7 AC/DC Button - Selects between AC or DC welding output

-8-

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

TIG (GTAW) INVERTER AC

50HZ

3 PHASE

>>>>

>> >>DC

>>>>

ARCMASTER 300 AC/DC 3ph 380/415V Input, 300A Tig Inverter with HF Tig, Lift Tig, Stick, Hot Start, Digital Meters, 2T/4T Function, Up Slope/ Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

PROCESS Part Number 10-3098

HF TIG LIFT TIG STICK Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight 25% @ 300A 5 - 300 Amps 420 x 210 x 450 mm 24 kg 40% @ 250A Part No. Description List Price £ 10-3098 TA 300 AC/DC 300 Amp AC/DC TIG Inverter Power Source 5211.00 with operating manual, primary cable, TIG plug (10-2096) and cable clamp (10-2097) OPTIONS AND ACCESSORIES CRT.ARCM3.1 WC.ARCM3.1 10-2007 10-2005 10-2096 10-2097 10-9997 304.090.404 302.050.404

ArcMaster 3.1 Workshop Cart ArcMaster Cooler Remote Foot control 7.6m lead and plug Remote Hand Pendant 7.6m lead and plug 14 Pin Plug for Remote or TIG Torch Button Cable Clamp for 14 Pin Plug 50mm2 DINSE TIG Torch adapter SA.26.4 TIG Torch - air cooled SA.18.4 TIG Torch - water cooled

422.00 1080.00 378.03 249.01 45.79 7.67 33.58 103.07 128.40

Machine Specifications Mains Input Voltage Protection Factor

Features

3ph. 400v IP23S

Smart Thermal Overload Protection with indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD Programmable Lift-Start TIG Hot Start HF Arc Starting TIG Pulser & Sloper Parameter memory settings

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked All functions and controls are easily set through robust easy to use push button switches Allows remote devices to be connected for controlling amperage and output contactor Alerts operator of power supply abnormalities VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable) Allowing for 5 welding programmes to be saved for maximum flexibility as standard features Provides TIG arc starting without use of high frequency For STICK welding - Provides ease of arc starts Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control Gives memory programmes which can easily be saved and recalled to give job settings to the operator at the push of a button

Item 1 2 3

8 5 6

3 4

65V 3 Years

Benefits

Logic®

Open Circuit Voltage Warranty Period

7 8

7 9

Description Pulse Function - enables the TIG current pulse functions Remote Current Function - enables remote current functions TIG Mode Functions - Pressing this button scrolls through the output TIG function models (Standard, Slope, Slope w/repeat, Spot) Digital LED Display - Welding amperage and parameter values are displayed in this window. internal warnings such as over temperature, low or high input voltage applied are signalled to the operator by a warning sound and error message on the screen Save/Load Button - By using the Save & Load buttons the operator can easily save up to 5 welding parameter programmes Control knob - Allows the operator to adjust the output amperage within the entire range of the power source, also used to set each parameter value Process Button - This button selects between STICK, or Lift TIG mode Scroll Buttons - Used to select the parameters to be set. The LED’s show which function is being adjusted on the Sequence Graph AC/DC Button - Selects between AC or DC welding output

-9-

>>>>

50HZ

1 PHASE

AC > >>>DC

>>>>

220 AC/DC 1ph 230V Input, 220A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control

Process HF TIG LIFT TIG STICK Part Number Duty Cycle @ Rated Output Output Range 10-9402 60% @ 170A 3 - 220 Amps 100% @ 150A Part No. 10-9402

Dimensions (H x W x D) 372 x 209 x 377 mm

Description TA 220 AC/DC 220 Amp Inverter Power Source with operating manual, primary cable and TIG plug (CO4025)

Net Weight 19 kg List Price ÂŁ 2541.00

OPTIONS AND ACCESSORIES 020218/MT 020258/TH 10-9996 010330 C04025 10-9840/F 10-9997 304.090.404

Thermal Arc HD Inverter Cart Thermal Arc HD Cooler TIG Remote Foot Control 7.6m lead+plug RC01 10m Standard Remote Control 5-Pin TIG Plug Remote Control Plug 50mm2 DINSE TIG Torch adapter SA.26.4 TIG Torch

578.00 1153.00 298.00 407.41 32.57 91.41 33.58 103.07

Machine Specifications Mains Input Voltage Protection Factor

1ph. 230v IP23

Open Circuit Voltage Warranty Period

50 - 60V 2 Years

Features

Benefits

Smart LogicÂŽ Thermal Overload Protection with indicator Simple to use Control Panel Interface Automatic Arc Control

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked All functions and controls are easily set through robust easy to use push button switches For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking and creating an inclusion Allows remote devices to be connected for controlling amperage and output contactor Provides TIG arc starting without use of high frequency Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control

Remote Receptacle Lift-Start TIG HF Arc Starting TIG Pulser & Sloper

Weldskill

220 150 AC/DC SE

220

8 9 7 1 Please note:

To fit a 3 piece water cooled TIG torch to this unit you will need a 50mm2 DINSE type TIG torch adapter (part number 10-9997) - 10 -

Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Description Selection key for Stick or TIG mode Stick / TIG mode indicator AC function + pulse current controls Selection key for HF or Lift Arc TIG HF ignition indicator Selection key for 2 or 4 stroke operation 2 stroke or 4 stroke mode indicator Selection key for pre-gas time Selection key for post-gas time Selection key for up slope time Control button for down slope time Output control potentiometer Amperage or voltage display indicator Amperage or voltage selection key Thermal overload/phase down indicator Digital meter display

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

TIG (GTAW) INVERTER

>>>>

50HZ

3 PHASE

AC > >>>DC

>>>>

350 AC/DC 3ph 400V Input, 350A Tig Inverter with HF Tig, Lift Tig, Stick, Digital Meters, 2T/4T Function, Up Slope/Down Slope with Repeat Function and Full Function Built In Pulse, AC Frequency Control and AC Wave Balance Control & IP & RPI Adjustment.

Process Part Number 10-9403 Part No. 10-9403

HF TIG LIFT TIG STICK Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) 40% @ 350A 3 - 350 Amps 704 x 279 x 460 mm 60% @ 300A Description TA 350 AC/DC 350 Amp Inverter Power Source

Net Weight 39 kg List Price £ 6435.00

with HD Inverter Cart, HD Cooler TIG, mains cable, operating manual and TIG plug (C04025)

OPTIONS AND ACCESSORIES 020216/GT 020255 10-9996 010330 C04025 10-9997 302.050.404

Thermal Arc HD Inverter Cart Thermal Arc HD Cooler TIG Thermal Arc Remote Foot Control 7.6m lead and plug Thermal Arc Remote Hand Control 10m RC01 5 Pin TIG Plug 50mm2 DINSE TIG Torch adapter SA.18.4 TIG Torch

562.00 1189.00 298.00 407.41 32.57 33.58 128.40

Machine Specifications Mains Input Voltage Protection Factor

3ph. 400v IP23

Open Circuit Voltage Warranty Period

57V 2 Years

Features

Benefits

Smart Logic® Thermal Overload Protection with indicator Simple to use Control Panel Interface Automatic Arc Control

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked

Remote Receptacle Lift-Start TIG HF Arc Starting TIG Pulser & Sloper IP Adjustment RPI Adjustment Parameter memory settings Item F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15 F16 F17 F18 F19 F20 F21

All functions and controls are easily set through robust easy to use push button switches For STICK welding - Automatically fine tunes the arc to prevent the electrode from sticking and creating an inclusion Allows remote devices to be connected for controlling amperage and output contactor Provides TIG arc starting without use of high frequency Provides non-contact arc starting that eliminates tungsten or material contamination Provides Pulse ON/OFF, Pulse Frequency, peak % time, background and peak amperage, initial and final slope times and amperage control Adjusts the amperage value for the positive/cleaning cycle in AC welding, giving heat input and bead control to the weld profile Adjusts the arc polarity to give precise arc ignition at the tungsten point Gives memory programmes which can easily be saved and recalled to give job settings to the operator at the push of a button

Description Welding mode setting key «MMA»/«TIG 2 stroke»/«TIG 4 stroke» SET UP setting key PULSE ON/OFF setting Key Low current adjustment setting key PULSE frequency adjustment setting key AC ON/OFF setting key AC frequency adjustment setting key Cleaning/penetration balance setting key Setting key for SETUP choice and for parameters: pregas, initial current, up-slope time Setting key for SETUP choice and for parameters: post gas duration, final current Digital display Digital display Knob for all parameters adjustment Knob for down slope time adjustment Indicator «MMA welding» Indicator «2 stroke TIG welding» Indicator «4 stroke TIG welding» Indicator «current in A» displayed on F11 Indicator «value in %» displayed on F11 Indicator «time in s» displayed on F11 Indicator «frequency in Hz» displayed on F11

Please note:

Item F22 F23 F24 F25 F26 F27 F28 F29 F30 F31

Description Indicator «dimension in mm» displayed on F11 Indicator «pre gas duration» in modification Indicator «initial current» in modification Indicator «up-slope time» in modification Indicator «PULSE mode» ON Indicator «AC mode» ON Indicator «final current» in modification Indicator «post gas duration» in modification Indicator main supply default Indicator cooler unit default

To fit a 3 piece water cooled TIG torch to this unit you will need a 50mm2 DINSE type TIG torch adapter - 11 (part number 10-9997)

FABRICATOR 181i 1ph 230V Input, 180A Compact Mig & Multiprocess Inverter Process MIG FLUX CORED MMA LIFT ARC TIG Part Number Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight W1003186 20% @ 180A 10 - 180 Amps 410 x 210 x 450mm 14.6 kg Part No. W1003186

Description List Price ÂŁ Fabricator 181i Compact MIG Inverter with feed rolls for 0.6 - 0.8mm 930.00 kurled and hard wire and 1 - 1.2mm soft wire, gas hose, earth cable and clamp, mains cable, Tweco MIG Torch, electrode holder for MMA and operating manual OPTIONS AND ACCESSORIES 62020 62022 62179 62024 62028 62023 WS180XE-10-3035 310.050.002

0.6/0.8mm Hard Wire V groove feed roll 0.9/1.2mm Hard Wire V groove feed roll 0.8/1.0mm Soft Wire U groove feed roll 0.9/1.2mm Soft Wire U groove feed roll 0.8/0.9mm Cored Wire V knurl feed roll 1.2/1.6mm Cored Wire V knurl feed roll Tweco Weldkill 180A MIG Torch, 3m 17V Tig Torch with 4m Lead

Machine Specifications Mains Input Voltage Welding Current Range Protection Class Warranty Period

1ph. 230v 10-180A IP23S 2 Years

Features VRD Digital Meters Thermal Overload protection with Indicator Adjustable Burn Back Control Trigger Latching Facility Reverse Polarity Facility 50mm Output Terminals 9

Generator Requirement Wire Drive Type Welding Output

MIG MMA TIG

7 KVA 2 Roll 20% @ 180A 20% @ 175A 25% @ 175A

Benefits VRD stands for Voltage Reduction Device, it reduces the OCV when the power supply is not in use. Eliminates the need for add on voltage reducers. (Field Capable) Allows the operator to easily check and adjust parameters Alerts operator if duty cycle is exceeded or airflow is blocked Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs in MIG and TIG modes Allows use of self shielding wires for outdoor applications Allows for easy polarity reversal and cable change Item 1 2 3 4 5 6 7

3 4

5 8 6 7

28.46 28.46 28.46 28.46 28.46 28.46 85.86 115.32

- 12 -

8 9

Description Power Indicator Thermal Overload Indicator Digital Voltage Meter Push-Button Process Selection Push-Button Trigger Mode Control Variable Inductance Control Multifunction control - Infinitely Variable Voltage / Down Slope / Arc Force Control Amperage Control Digital Amperage Meter

WELDING EQUIPMENT

INVERTER MIG (GMAW) MACHINE

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

>>>>

1 PHASE

50HZ 60

OO OO

CV }||{

>>>

>>>>

FABRICATOR 200 COMPACT 1ph 230V Input, 200A Compact Mig Machine with 8 Voltage settings Process MIG FLUX CORED Part Number Duty Cycle @ Rated Output Output Range 707079 13% @ 200A 30 - 200 Amps 30% @ 145A Part No. 707079

Dimensions (H x W x D) Net Weight 770 x 410 x 830 mm 58 kg

Description Fabricator 200 Machine with Work Lead, Wheeling Kit/Cylinder Tray, gas hose, 0.6/0.8 Feed Roll and operating manual

List Price ÂŁ 861.00

OPTIONS AND ACCESSORIES 62020 62179 62024 62028 62023

0.6/0.8mm Hard Wire V groove feed roll 0.8/1.0mm Soft Wire U groove feed roll 0.9/1.2mm Soft Wire U groove feed roll 0.8/0.9mm Cored Wire V knurl feed roll 1.2/1.6mm Cored Wire V knurl feed roll

WS220XE-10-3035 WS220XE-12-3035

Tweco Weldkill 200A MIG Torch, 3m Tweco Weldkill 200A MIG Torch, 3.6m

Machine Specifications Mains Input Voltage Arc Voltage Range Voltage Settings Warranty Period

1ph. 230v 15 - 22v 8 3 Years

Features Thermal Overload protection with Indicator Reverse Polarity Facility Spot Timer Control

28.46 28.46 28.46 28.46 28.46 94.34 100.70

Wire Feed System Specifications Wire Feed Speed Range 1 - 18 m/min Wire Drive Type 2 Roll Wire Diameter Range Hard Wire 0.6-0.8mm Soft Wire 0.8-1.0mm Cored Wire 0.6-1.2mm

Benefits Alerts operator if duty cycle is exceeded or airflow is blocked Allows use of self shielding wires for outdoor applications Consistently timed, uniform tack welds

- 13 -

Item

Description

1 2 3 4 5 6 7 8 9 10

Thermal overload light Wire speed control Spot time control Output voltage switch Positive welding current terminal Torch polarity lead Negative welding current terminal Euro-kwik torch connection Spot mode switch Standby switch

>>>>

1 PHASE

50HZ 60

OO OO

CV }||{

>>>

>>>>

FABRICATOR 250 COMPACT 1ph 230V Input, 250A Compact Mig Machine with 16 Voltage settings Process MIG FLUX CORED Part Number Duty Cycle @ Rated Output Output Range 706114 50% @ 250A 30 - 250 Amps Part No. 706114

Dimensions (H x W x D) Net Weight 800 x 355 x 850 mm 103 kg

Description Fabricator 250 Compact Machine complete with feed rolls for 0.6/1.0mm wire, gas hose, earth cable and clamp, mains cable and operating manual

List Price ÂŁ 1495.00

OPTIONS AND ACCESSORIES 62020 62022 62179 62024 7977728 62028 62023

0.6/0.8mm 0.9/1.2mm 0.8/1.0mm 0.9/1.2mm 1.2/1.6mm 0.8/0.9mm 1.2/1.6mm

WS220XE-10-3035 WS220XE-12-3035

Machine Specifications Mains Input Voltage Arc Voltage Range Voltage Settings Warranty Period

Hard Wire V groove feed roll Hard Wire V groove feed roll Soft Wire U groove feed roll Soft Wire U groove feed roll Soft Wire U groove feed roll Cored Wire V knurl feed roll Cored Wire V knurl feed roll Tweco Weldkill 200A MIG Torch, 3m Tweco Weldkill 200A MIG Torch, 3.6m

1ph. 230v 15 - 29v 16 2 Years

Features Thermal Overload protection with Indicator Reverse Polarity Facility Spot Timer Control Adjustable Burn Back Control Trigger Latching Facility

28.46 28.46 28.46 28.46 28.46 28.46 28.46 94.34 100.70

Wire Feed System Specifications Wire Feed Speed Range 1 - 20 m/min Wire Drive Type 2 Roll Wire Diameter Range Hard Wire 0.6-1.0mm Soft Wire 0.8-1.2mm Cored Wire 0.8-1.2mm Benefits Alerts operator if duty cycle is exceeded or airflow is blocked Allows use of self shielding wires for outdoor applications Consistently timed, uniform tack welds Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Item 1 2 3 4 5

- 14 -

Description Standby Switch with Indicator Light Thermal Overload Warning Light Coarse Voltage Step Adjustment Fine voltage Step Adjustment Wire Feed Speed Control

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

>>>>

3 PHASE

50HZ

OO OO

CV }||{

>>>

>>>>

FABRICATOR 330 COMPACT and SEPARATE with VF2C Wire Feed Unit 3ph 220/380/400V Input, 330A Mig Machine with 24 Voltage settings and Digital Meters Process MIG FLUX CORED Part Number Duty cycle @ Rated Output 706124 30% @ 330A 706125 30% @ 330A

Output Range 25 - 330 Amps 25 - 330 Amps

Dimensions (H x W x D) Net Weight 800 x 355 x 850 mm 85 kg 800 x 355 x 850 mm 102 kg

Part No.

Description

706124

Fabricator 330 Compact Machine complete with feed rolls for 0.6/1.2mm wire, gas hose, earth cable and clamp, mains cable and operating manual Fabricator 330 Separate complete with VF2c roll feeder, 8m connecting cable, feed rolls for 0.6/1.2mm wire, gas hose, earth cable and clamp, mains cable and operating manual

706125

List Price £ 1636.00 1985.00

OPTIONS AND ACCESSORIES List £

List £

62020 62022 62179 62024 7977728 62028 62023

0.6/0.8mm 0.9/1.2mm 0.8/1.0mm 0.9/1.2mm 1.2/1.6mm 0.8/0.9mm 1.2/1.6mm

28.46 28.46 28.46 28.46 28.46 28.46 28.46

705975 704913 705900 705948

Wire feeder swivel base Wire feeder trolley 8m interconnecting ext. cable Spool Cover

Recommended Torches 161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A)

153.15 161.66 168.74

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Voltage Settings Warranty Period

3ph. 220/380/400v 16 - 29v 24 2 Years

Features Thermal Overload protection with Indicator Reverse Polarity Facility Spot Timer Control (Compact model only) Stitch Timer Control (Compact model only) Adjustable Burn Back Control Trigger Latching Facility

140.63 88.19 350.92 80.00

Hard Wire Soft Wire Cored Wire

1 - 20 m/min 2 Roll 0.6-1.2mm 0.9-1.6mm 0.8-1.6mm

Benefits Alerts operator if duty cycle is exceeded or airflow is blocked Allows use of self shielding wires for outdoor applications Consistently timed, uniform tack welds Allows operator to set dedicated on/off times to produce uniform short runs Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Item 1 2 3 4 5 - 15 -

Description Standby Switch with Indicator Light Thermal Overload Warning Light Coarse Voltage Step Adjustment Fine voltage Step Adjustment Wire Feed Speed Control

50HZ

3 PHASE

>>>>

OO OO

CV }||{

>>>

>>>>

FABRICATOR 400II SEPARATE WITH VF4ECII WIRE FEED UNIT 3ph 400V Input, 400A separate Mig Machine with 20 Voltage settings, Digital Meters, micro processor control

Process Part Number 10-9405

MIG FLUX CORED Duty Cycle @ Rated Output 30% @ 400A

Output Range 40 - 400 Amps

Dimensions (H x W x D) 1360 x 370 x 760 mm

Net Weight 110 kg

Part No. Description List Price £ 10-9405 Fabricator 400A Remote system with 1m interconnection, 1.0/1.2 mm 2299.00 drive rolls, Earth cable & clamp, feeder wheel kit, mains cable and operating manual OPTIONS AND ACCESSORIES VM0263 VM0266 VM0267 2187 2189 2511

List £

1m Interconnecting cable assy a/c 151.80 5m Interconnecting cable assy a/c 196.78 10m Interconnecting cable assy a/c 359.83 0.6/0.8mm Hard Wire V Groove Feed Roll 36.55 1.0/1.2mm Hard Wire V Groove Feed Roll 36.55 1.2/1.6mm Hard Wire V Groove Feed Roll 36.55

List £

2269 2316 2513 2319 2321

10/1.2mm 1.2/1.6mm 1.6/2.0mm 1.0/1.2mm 1.2/1.6mm

Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Cored Wire V Groove Feed Roll Cored Wire V Groove Feed Roll

153.15 161.66 168.74

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph 400v 19.9V - 46.6v IP 21 2 Years

Protection Factor Warranty Period

Features Thermal Overload protection with Indicator Spot Timer Control Stitch Timer Control Adjustable Burn Back Control Trigger Latching Facility Electronic feedback of wire speed Voltage and amp meters at wfu Pre + post gas control Initial Speed Control

36.55 36.55 36.55 36.55 36.55

Hard Wire Soft Wire Cored Wire

1-19m/min 4 Roll Geared 0.6-1.2mm 0.8-1.2mm 0.8-1.6mm

Benefits Alerts operator if duty cycle is exceeded or airflow is blocked Allows trigger to time out to give uniform tacks Allows operator to set dedicated on/off times to produce uniform short runs Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Constant wire feed speed Allows operator to see parameters at working area Allows operator to change pre + post gas times to suit applications Allows operator to change initial wire speed time for soft start applications

400

7 3 6

Item 1 2 3 4 5 6 7

Description

Thermal overload warning light Digital meters control knob Cold wire inch Gas purge Mode selector Secondary parameter settings button

Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set - 16 -

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

WELDING EQUIPMENT

MIG (GMAW) TRANSFORMER RECTIFIER MACHINE

>>>>

50HZ

3 PHASE

OO OO

CV }||{

>>>>

>>>

FABRICATOR 450II SEPARATE WITH VFE4CII WIRE FEED UNIT 3ph 400V Input, 520A separate Mig Machine with 30 Voltage settings, Digital Meters, micro processor control Process

MIG

Part Number

Duty Cycle @ Rated Output

Output Range

Dimensions (H x W x D)

10-9406

60% @ 400A

40 - 520 Amps

1400 x 470 x 770 mm

Part No.

FLUX CORED Net Weight

165 kg

Description

List Price £

10-9406

Fabricator 450A Separate system with 1m interconnection A/C, 1.0/1.2 mm drive rolls, Earth cable & clamp, feeder wheel kit, mains cable and operating manual OPTIONS AND ACCESSORIES List £ A.0014-OA VM0264 VM0265 VM0268 VM0263 VM0266 VM0267

Water Cooler w/flow sensor c/w fittings 1m Interconnecting cable assy w/c 5m Interconnecting cable assy w/c 10m Interconnecting cable assy w/c 1m Interconnecting cable assy a/c 5m Interconnecting cable assy a/c 10m Interconnecting cable assy a/c

708.19 179.91 269.87 461.02 151.80 196.78 359.83

2187 2189 2511 2269 2316 2513 2319 2321

0.6/0.8mm 1.0/1.2mm 1.2/1.6mm 10/1.2mm 1.2/1.6mm 1.6/2.0mm 1.0/1.2mm 1.2/1.6mm

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

Warranty Period

Features

Hard Wire Soft Wire Cored Wire

1-19m/min 4 Roll Geared 0.6 - 1.6mm 0.8 - 1.6mm 0.8 - 1.6mm

Benefits

Thermal Overload protection with Indicator Spot Timer Control Stitch Timer Control Adjustable Burn Back Control

Alerts operator if duty cycle is exceeded or airflow is blocked Allows trigger to time out to give uniform tacks Allows operator to set dedicated on/off times to produce uniform short runs Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Constant wire feed speed Allows operator to see parameters at working area Allows operator to change pre + post gas times to suit applications Allows operator to change initial wire speed time for soft start applications Torch will not burn out if no water flow at cooler Allows easy conversion from air cooled to water cooled

Trigger Latching Facility Electronic feedback of wire speed Voltage and amp meters at wfu Pre + post gas control Initial Speed Control Water Cooler system protection Easy fit water cooler

450

Item 1 2 3 4 5 6 7 8

8 4 7

36.55 36.55 36.55 36.55 36.55 36.55 36.55 36.55

153.15 161.66 168.74

Machine Specifications

Protection Factor

List £

Hard Wire V Groove Feed Roll Hard Wire V Groove Feed Roll Hard Wire V Groove Feed Roll Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Soft Wire U Groove Feed Roll Cored Wire V Groove Feed Roll Cored Wire V Groove Feed Roll

3365.00

Description

Water cooler warning light Thermal overload warning light Digital meters control knob Cold wire inch Gas purge Mode selector Secondary parameter settings button

Please note: The wire feed unit is a four roll system, therefore two of any of the above drive rolls are required to complete one set - 17 -

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 320SP Air Cooled System 3ph 400v Input, 320A Digital Control Synergic MIG Compact System FCAW

PowerMaster Plus

Process

MIG

Part Number

Duty Cycle @ Rated Output Output Range

MMAW Dimensions (H x W x D) Net Weight

W1000103PP

60% @ 320A 100% @ 280A

498 x 340 x 745 mm

5 - 320 Amps

Part No.

Description

W1000103PP

320A PowerMaster Mobile Power Source complete with 1.0mm/1.2mm V drive rollers, gas hose and operating manual

35 kg

List Price £ 6265.00

OPTIONS AND ACCESSORIES W4000000 W4011601 W4001301 W4000300

Remote Control RC 20 TIG Kit Water Recirculator Thermal Arc Inverter Cart

255.00 489.13 1218.90 504.90

Recommended Torches 161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m 161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A) ML3600PM Digital Push-pull torch 8m Air Cooled

FEED ROLLS

List £

74238 74129 74109 74102 74107

36.18 36.18 36.18 36.18 36.18

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

307.40 339.20 153.15 161.66 168.74 2154.00 List £

74796 74797 7977734 74291 7977372

1.0/1.2mm Soft Wire U Groove 1.2/1.6mm Soft Wire U Groove 0.8/0.9mm Cored Wire V Knurl 1.2/1.6mm Cored Wire V Knurl 1.6/2.4mm Cored Wire V Knurl

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v 15.2 - 30v IP23 3 Years

Features

PowerMaster Plus 100 Programmes accessible from MIG torch Synergic One Knob Control Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design Spatter free in majority of welding applications

Hard Wire Soft Wire Cored Wire

36.18 36.18 36.18 36.18 36.18

0.1 - 25 m/min 4 Roll 0.6-1.6mm 0.8-1.6mm 0.8-2.4mm

Benefits Increases welding speed by up to 30% Single pass butt welds possible up to 12 mm in thickness Increased penetration compared to standard systems Reduced risk of undercut Ensuring fast and flexible control Arc energy matched to wire feed speed to give excellent welding conditions TIG quality welds at MIG speeds ideally suited to thin gauge material Enabling machine to withstand rigor of every day use User friendly with all parameters - programmes easily viewed Giving precise arc characteristics at low running costs Less clean up time, aesthetically pleasing weld appearance - 18 -

WELDING EQUIPMENT

= PLUS ... ER FAST ER... TH SMOO ER... BETT

WELDING EQUIPMENT

= PLUS ... ER FAST ER... TH SMOO ER... BETT

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 400SP

PowerMaster Plus

Air Cooled System

3ph 400v Input, 400A Digital Control Synergic MIG Separate System Process

MIG

FCAW

MMAW

Duty Cycle @ Rated Output

Output Range

Dimensions (H x W x D)

Net Weight

60% @ 400A 100% @ 350A

5 - 400 Amps

855 x 445 x 1116 mm

112 kg

BASIC PACKAGE COMPONENTS Part No.

Description

W1000303PP W3000103 W4000400

400A PowerMaster Power Source Air Cooled 4 Roll Workshop Wire Feeder Air Cooled complete with 1.0/1.2mm V drive rollers 1m 70mm Air-Cooled Interconnection

List Price £

6205.00 1795.00 238.00

OPTIONS AND ACCESSORIES W4000100 Remote Control HR 911 W4011600 TIG Kit W4001000 Swivel Unit W4000503 5m 70mm Air-Cooled Interconnection W4000401 10m 70mm Air-Cooled Interconnection W4000606 20m 95mm Air- and Water-Cooled Interconnection Recommended Torches 161.628.307 TWECO DSA MIG Digital Air Cooled Torch 400A 3m 161.628.407 TWECO DSA MIG Digital Air Cooled Torch 400A 4m ML3600PM Digital Push-pull torch 8m Air Cooled 161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 161.560.457 TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A)

FEED ROLLS

List £

74238 74129 74109 74102 74107

36.18 36.18 36.18 36.18 36.18

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

706.49 339.24 127.40 384.00 514.00 1080.00 307.40 339.20 2154.00 153.15 161.66 168.74 List £

74796 74797 7977734 74291 7977372

1.0/1.2mm Soft Wire U Groove 1.2/1.6mm Soft Wire U Groove 0.8/0.9mm Cored Wire V Knurl 1.2/1.6mm Cored Wire V Knurl 1.6/2.4mm Cored Wire V Knurl

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v 15.2 - 34v IP23 3 Years

Features

Hard Wire Soft Wire Cored Wire

36.18 36.18 36.18 36.18 36.18

0.1 - 25 m/min 4 Roll 0.6-1.6mm 0.8-1.6mm 0.8-2.4mm

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 400SP

WELDING EQUIPMENT

= PLUS ... ER FAST ER... TH SMOO ER... BETT

PowerMaster Plus

Water Cooled System

3ph 400v Input, 400A Digital Control Synergic MIG Separate System Process

MIG

FCAW

MMAW

Duty Cycle @ Rated Output

Output Range

Dimensions (H x W x D)

Net Weight

60% @ 400A 100% @ 350A

5 - 400 Amps

855 x 445 x 1116 mm

112 kg

BASIC PACKAGE COMPONENTS Part No.

Description

List Price £

W1000203PP W3000203 W4000500

400A PowerMaster Power Source with Integrated Water Cooler 7210.00 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1917.00 1m 70mm Water-Cooled Interconnection 261.00

OPTIONS AND ACCESSORIES W4000100 Remote Control HR 911 W4011600 TIG Kit W4001000 Swivel Unit W4000503 5m 70mm Water-Cooled Interconnection W4000501 10m 70mm Water-Cooled Interconnection W4000606 20m 95mm Water-Cooled Interconnection Recommended Torches 160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m MW5400PM Digital Push-Pull torch 8m Water Cooled W4001500 Push-Pull Control Board 552.316.307 SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) 552.316.407 SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A)

FEED ROLLS

List £

74238 74129 74109 74102 74107

36.18 36.18 36.18 36.18 36.18

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

706.49 339.24 127.40 384.00 540.00 1080.00 479.12 524.70 2212.00 241.34 292.36 312.29 List £

74796 74797 7977734 74291 7977372

1.0/1.2mm Soft Wire U Groove 1.2/1.6mm Soft Wire U Groove 0.8/0.9mm Cored Wire V Knurl 1.2/1.6mm Cored Wire V Knurl 1.6/2.4mm Cored Wire V Knurl

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v 15.2 - 34v IP23 3 Years

Features

Hard Wire Soft Wire Cored Wire

36.18 36.18 36.18 36.18 36.18

0.1 - 25 m/min 4 Roll 0.6-1.6mm 0.8-1.6mm 0.8-2.4mm

WELDING EQUIPMENT

= PLUS ... ER FAST ER... TH SMOO ER... BETT

SYNERGIC MIG PULSE INVERTER

POWERMASTER PLUS 500SP

PowerMaster Plus

Water Cooled System

3ph 400v Input, 500A Digital Control Synergic MIG Separate System Process

MIG

FCAW

MMAW

Duty Cycle @ Rated Output

Output Range

Dimensions (H x W x D)

Net Weight

100% @ 500A

5 - 500 Amps

855 x 445 x 1116 mm

121 kg

BASIC PACKAGE COMPONENTS Part No.

Description

W1000503PP W3000203 W4000600

500A PowerMaster Power Source with Integrated Water Cooler 8070.00 4 Roll Workshop Wire Feeder Water Cooled complete with 1.0/1.2mm V drive rollers 1917.00 1m 95mm Water-Cooled Interconnection 277.00

List Price £

OPTIONS AND ACCESSORIES W4000100 Remote Control HR 911 W4011600 TIG Kit W4001000 Swivel Unit W4000607 5m 95mm Water-Cooled Interconnection W4000601 10m 95mm Water-Cooled Interconnection W4000606 20m 95mm Water-Cooled Interconnection Recommended Torches 160.620.307 TWECO DSW MIG Digital Water Cooled Torch 500A 3m 160.620.407 TWECO DSW MIG Digital Water Cooled Torch 500A 4m MW5400PM Digital Push-Pull torch 8m Water Cooled

FEED ROLLS

List £

74238 74129 74109 74102 74107

36.18 36.18 36.18 36.18 36.18

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

706.49 339.24 127.40 421.00 600.00 1080.00 479.12 524.70 2212.00 List £

74796 74797 7977734 74291 7977372

1.0/1.2mm Soft Wire U Groove 1.2/1.6mm Soft Wire U Groove 0.8/0.9mm Cored Wire V Knurl 1.2/1.6mm Cored Wire V Knurl 1.6/2.4mm Cored Wire V Knurl

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v 15.2 - 39v IP23 3 Years

Features

Hard Wire Soft Wire Cored Wire

36.18 36.18 36.18 36.18 36.18

0.1 - 25 m/min 4 Roll 0.6-1.6mm 0.8-1.6mm 0.8-2.4mm

SYNERGIC MIG PULSE INVERTER

WELDING EQUIPMENT

= PLUS ... ER FAST ER... TH SMOO ER... BETT

PowerMaster Plus POWERMASTER PLUS 400SP ROBOTIC PACKAGE Water Cooled System 3ph 400v Input, 400A Digital Control Synergic MIG Separate System with integrated cooler, remote control pendant HR911, 42 pin 10m robot interface cable Process

MIG

FCAW

MMAW

Duty Cycle @ Rated Output

Output Range

Dimensions (H x W x D)

Net Weight

50% @ 400A 100% @ 320A

5 - 400 Amps

855 x 445 x 1116 mm

112 kg

BASIC PACKAGE COMPONENTS Part No.

Description

W1000403PP

400A PowerMaster Power Source with Integrated Water Cooler, Remote Control Pendant HR911, 42 pin 10m Robot Interface Cable 4 Roll SP4000R Robotic Wire Feeder complete with 1.0/1.2mm V drive rolls 10m 70mm Water-Cooled Robotic Interconnection

W3000303 W4000502

List Price £

10240.00 1555.00 538.56

OPTIONS AND ACCESSORIES W4000100 W4000800 W4000700

Remote Control HR 911 42 pin plug for robot interface cable 10m robot control cable (includes W4000800)

FEED ROLLS

List £

74238 74129 74109 74102 74107

36.18 36.18 36.18 36.18 36.18

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

706.49 253.77 407.22 List £

74796 74797 7977734 74291 7977372

1.0/1.2mm Soft Wire U Groove 1.2/1.6mm Soft Wire U Groove 0.8/0.9mm Cored Wire V Knurl 1.2/1.6mm Cored Wire V Knurl 1.6/2.4mm Cored Wire V Knurl

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v 15.2 - 34v IP23 3 Years

Features

PowerMaster Plus Synergic One Knob Control Twin Pulse (pulse on pulse) welding Heavy Duty, Tough Case design Micro processor control with digital display High efficiency inverter design Spatter free in majority of welding applications

Hard Wire Soft Wire Cored Wire

36.18 36.18 36.18 36.18 36.18

0.1 - 25 m/min 4 Roll 0.6-1.6mm 0.8-1.6mm 0.8-2.4mm

Benefits Increases welding speed by up to 30% Single pass butt welds possible up to 12 mm in thickness Increased penetration compared to standard systems Reduced risk of undercut Arc energy matched to wire feed speed to give excellent welding conditions TIG quality welds at MIG speeds ideally suited to thin gauge material Enabling machine to withstand rigor of every day use User friendly with all parameters - programmes easily viewed Giving precise arc characteristics at low running costs Less clean up time, aesthetically pleasing weld appearance - 22 -

WELDING EQUIPMENT

= PLUS ... ER FAST ER... TH SMOO ER... BETT

SYNERGIC MIG PULSE INVERTER

PowerMaster Plus POWERMASTER PLUS 500SP ROBOTIC PACKAGE Water Cooled System 3ph 400v Input, 500A Digital Control Synergic MIG Separate System with integrated cooler, remote control pendant HR911, 42 pin 10m robot interface cable Process

MIG

FCAW

MMAW

Duty Cycle @ Rated Output

Output Range

Dimensions (H x W x D)

Net Weight

60% @ 500A 100% @ 400A

5 - 500 Amps

855 x 445 x 1116 mm

121 kg

BASIC PACKAGE COMPONENTS Part No.

Description

W1000603PP W3000303 W4000602

500A PowerMaster Power Source with Integrated Water Cooler 4 Roll SP4000R Robotic Wire Feeder complete with 1.0/1.2mm V drive rolls 10m 90mm Interconnection

List Price £

10765.00 1555.00 590.58

OPTIONS AND ACCESSORIES W4000100 W4000800 W4000700

Remote Control HR 911 42 pin plug for robot interface cable 10m robot control cable (includes W4000800)

FEED ROLLS

List £

74238 74129 74109 74102 74107

36.18 36.18 36.18 36.18 36.18

0.6/0.8mm Hard Wire V Groove 0.8/1.0mm Hard Wire V Groove 1.0/1.2mm Hard Wire V Groove 1.2/1.6mm Hard Wire V Groove 0.8/0.9mm Soft Wire U Groove

706.49 253.77 407.22

List £

74796 74797 7977734 74291 7977372

1.0/1.2mm Soft Wire U Groove 1.2/1.6mm Soft Wire U Groove 0.8/0.9mm Cored Wire V Knurl 1.2/1.6mm Cored Wire V Knurl 1.6/2.4mm Cored Wire V Knurl

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v 15.2 - 34v IP23 3 Years

Features

Hard Wire Soft Wire Cored Wire

36.18 36.18 36.18 36.18 36.18

0.1 - 25 m/min 4 Roll 0.6-1.6mm 0.8-1.6mm 0.8-2.4mm

Benefits Increases welding speed by up to 30% Single pass butt welds possible up to 12 mm in thickness Increased penetration compared to standard systems Reduced risk of undercut Arc energy matched to wire feed speed to give excellent welding conditions TIG quality welds at MIG speeds ideally suited to thin gauge material Enabling machine to withstand rigor of every day use User friendly with all parameters - programmes easily viewed Giving precise arc characteristics at low running costs Less clean up time, aesthetically pleasing weld appearance - 23 -

WELDING EQUIPMENT

DIGITAL TORCHES - DSA.40

AIR COOLED Part No.

Description

List Price ÂŁ

161.628.307 161.628.407

TWECO DSA MIG Digital Air Cooled Torch 400A 3m TWECO DSA MIG Digital Air Cooled Torch 400A 4m

ML3600PM Push Pull Torch 8m Air Cooled This torch includes all boards and sockets required to fit to the PowerMaster machines

307.40 339.20 2154.00

Standard Consumables Conductor Tube 116103510

Conductor Tube with Insulator

Nozzles 23-50 23-62 23-75

Insulated Fixed Nozzle 12.7mm Insulated Fixed Nozzle 15.9mm (fitted as standard) Insulated Fixed Nozzle 19.1mm

Contact Tips 14H-35 14H-40 14H-45 14H-52 14H-116

Contact Tip 0.8mm Contact Tip 1.0mm Contact Tip 1.2mm Contact Tip 1.3mm (fitted as standard) Contact Tip 1.6mm

0.96 0.96 0.96 0.96 0.96

Diffusers 54A

Gas Diffuser

3.14

Liners 134090402 S129.5.44.115

4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard) Liner Guide, 115mm

POR

- 24 -

10.43 10.43 10.43

12.35 7.37

WELDING EQUIPMENT

DIGITAL TORCHES = DSW.300 / DSW.450

WATER COOLED Part No.

Description

List Price ÂŁ

160.610.307 160.610.407 160.620.307 160.620.407

TWECO DSW MIG Digital Water Cooled Torch 300A 3m TWECO DSW MIG Digital Water Cooled Torch 300A 4m TWECO DSW MIG Digital Water Cooled Torch 500A 3m TWECO DSW MIG Digital Water Cooled Torch 500A 4m

MW5400PM Push Pull Torch 8m Water Cooled This torch includes all boards and sockets required to fit to the PowerMaster machines

405.98 442.02 479.12 524.70 2212.00

Standard Consumables Conductor Tube SW63-50 116116104 Nozzles 300A SW23-15 SW23-12 SW23-18 500A SW24-17 SW24-15 SW24-21

Conductor Tube Assembly (300A) Conductor Tube Assembly (500A)

93.80 POR

15mm Nozzle (fitted as standard) 12mm Nozzle 18mm Nozzle

8.38 8.38 8.38

Nozzle (500A) (fitted as standard) 15mm Nozzle 21mm Nozzle

8.65 8.65 8.65

Contact Tips 300A 14H-35 14H-40 14H-45 14H-52 500A 16S-35 16S-40 16S-45 16S-52 16S-116 16S-564

Contact Tip 0.8mm Contact Tip 1.0mm Contact Tip 1.2mm Contact Tip 1.3mm (fitted as standard)

0.96 0.96 0.96 0.96

Contact Tip 0.8mm Contact Tip 1.0mm Contact Tip 1.2mm Contact Tip 1.3mm (fitted as standard) Contact Tip 1.6mm Contact Tip 2.0mm

1.31 1.31 1.31 1.31 1.31 1.31

Diffusers SW53-14 SW54-16S

Diffuser (300A) Diffuser (500A)

5.95 5.24

Liners 134090402 S129.5.44.115

4m Liner for all wires 1.2-1.6mm Carbo (supplied as standard) Liner Guide, 115mm - 25 -

12.35 7.37

>>>>

50HZ

3 PHASE

CC CV

>>>>

>>>

ARCMASTER 400 MST 3ph 380/415V Input, 400A Multi Process Inverter with Mig, Lift Tig and Stick facility Process HF TIG LIFT TIG STICK Part Number Duty Cycle @ Rated Output Output Range 10-3089 25% @ 400A 5 - 400 Amps

Dimensions (H x W x D) Net Weight 420 x 210 x 450 mm 25 kg

Part No. Description 10-3089 TA 400 MST 400 Amp DC CC/CV Multi Process Inverter OPTIONS AND ACCESSORIES 10-2007 Remote Foot control 7.6m lead and plug 10-2005 Remote Hand Pendant 7.6m lead and plug 10-2096 14 Pin Plug for Remote or TIG Torch Button 10-2097 Cable Clamp for 14 Pin Plug CRT.ARCM3.1 ArcMaster 3.1 Workshop Cart WC.ARCM3.1

ArcMaster Cooler

TIG/HF400A 400A TIG HF Box (see page 27 for details) 030104-A-SPTH Wire Feed Unit (see page 28 for details)

List Price ÂŁ 3350.00 378.03 249.01 45.79 7.67 422.00 1080.00 1799.00 1250.00

Machine Specifications Mains Input Voltage Protection Factor

3ph. 380/415v IP23S

Features

Benefits

LogicÂŽ

Smart Thermal Overload Protection with indicator Simple to use Control Panel Interface Remote Receptacle Warning Circuitry VRD

Lift-Start TIG Hot Start

Item Description 1 2 3

2 4 5 6 7

65V 3 Years

Eliminates damage if the machine is accidentally installed to the improper voltage Alerts operator if duty cycle is exceeded or airflow is blocked

Programmable

Open Circuit Voltage Warranty Period

VRD- (Voltage Reduction Device) lights indicate on or off STICK/MIG Parameters - Pressing this button scrolls through the STICK functions or MIG functions Digital LED display - welding amperage and voltage or parameter values are displayed in these windows. Internal warnings are signalled to the operator Save/Load Buttons - By using the Save & Load buttons the operator can easily save up to 5 welding programmes Control knob - allows the operator voltage within the entire range of the power source, also used to set each parameter value Process functions - pressing this button scrolls through the output process modes (STICK, Lift TIG, MIG) Remote current function - pressing this button enables remote current Remote contactor function - pressing this button enables remote contactor one or off - 26 -

WELDING EQUIPMENT

TIG (GTAW) INVERTER

WELDING EQUIPMENT

400A HF TIG BOX For Use with 400 MST

Process Part Number TIG/HF400A Part No. TIG/HF400A

HF TIG Duty Cycle @ Rated Output Output Range 200A @ 60% TIG / 10 – 400Amps DC 400A @ 25% STICK

Dimensions (H x W x D) Net Weight 240 x 204 x 325 mm 10.3kg

Description 400A HF TIG Box complete with operating manual, TIG Plug (10-2096) and Cable Clamp (10-2097)

OPTIONS AND ACCESSORIES 5M-TIG/HF-LEAD 5m Control Cable c/w 14 Pin Amphenols 10M-TIG/HF-LEAD 10m Control Cable c/w 14 Pin Amphenols 15M-TIG/HF-LEAD 15m Control Cable c/w 14 Pin Amphenols 10-2007 Remote Foot control 7.6m lead and plug 10-2005 Remote Hand Pendant 7.6m lead and plug 10-2096 14 Pin Plug for Remote or TIG Torch Button 10-2097 Cable Clamp for 14 Pin Plug

List Price £ 1799.00

162.15 185.30 208.48 378.03 249.01 45.79 7.67

Machine Specifications Welding Voltage input range HF Output Voltage Input Voltage Protection Factor Warranty Period

10 – 100V DC 6 KV 24V AC 1.2A (supplied from Power supply via 14pin socket) IP22 3 Years

Features

Benefits

Fast Clean HF Arc Starting Digital Meter Precise Amperage Control Preview Set Current Simple to use Control Panel

Perfect TIG starts every time Easily read amperage from a distance Allows operator to set exactly desired amperage for TIG and MMA Allows operator to precisely set desired amps in TIG mode prior to welding Allows operator to set all functions, up slope, down slope and post flow easily with all controls in seconds Allows operator to set precise gas flow at control panel Allows switching for local to remote amperage control for use with hand pendant, foot control or on torch current control Allows torch trigger latching (4T) or standard on/off trigger function (2T). Selects either TIG welding with all functions or MMA welding through the TIG box Allows use of mono or dual cable TIG torches One of the smallest/lightest in its class allowing operator to easily transport to difficult areas Panel lid overhang ensures protection of control dials

Inbuilt Gas Flow Control Local Remote Facility Torch Trigger Latching TIG MMA Switch Dual TIG Torch Connectors Portability Designed for Site Use

1 4

8 5

13 11 9 - 27 -

Item 1 2 3 4 5 6 7 8 9 10 11 12 13

Description TIG/MMA switch Latch / norm switch Upslope control Downslope control Amps control Local remote switch Ammeter Post flow control Work socket Tig torch connectors Remote 14 pin socket Amps preset Gas flow control

Workshop style WFU suitable for 400MST. 4 roll drive system suitable for light and heavy duty applications

Process Part Number 030104-A-SPTH

MIG Duty Cycle @ Rated Output Output Range 400A @ 25% MIG 5 – 400Amps

Dimensions (H x W x D) Net Weight 460 x 279 x 568 mm 15kg

Part No. Description 030104-A-SPTH 4 Roll Wire Feed Unit for Arcmaster 400 MST fitted with 1.0 - 1.2mm feed rolls

List Price £ 1250.00

OPTIONS AND ACCESSORIES 5MAC-MSTFD-LEAD 10MAC-MSTFD-LEAD 5MWC-MSTFD-LEAD 10MWC-MSTFD-LEAD

5m Air cooled interconnect 400MST 10m Air cooled interconnect 400MST 5m Water cooled interconnect 400MST 10m Water cooled interconnect 400MST

U450810AC U451012AC U451216AC U451012AL U451216AL U451216FR

0.8 / 1.0mm Hard Wire V groove feed roll 1.0 / 1.2mm Hard Wire V groove feed roll 1.2 / 1.6mm Hard Wire V groove feed roll 1.0 / 1.2mm Soft Wire U groove feed roll 1.2 / 1.6mm Soft Wire U groove feed roll 1.2 / 1.6mm Cored Wire groove feed roll

288.89 384.13 339.68 447.62

Wire Feed System Specifications Wire Feed Speed Range Wire Drive Type Wire Diameter Range

1 - 20 m/min 4 Roll 0.8-1.6mm 1.0-1.6mm

Hard Wire Soft Wire

Features

Benefits

4 Roll Drive System Remote Voltage Control Remote Wire Speed Control Enclosed Spool Gun Trigger Hold (2T/4T)

Smooth and reliable wire feed system Allows adjustment of power source arc voltage from the wire feeder Allows adjustment ofwire speed from the wire feeder Prevents wire contamination and enables use in dirty envirnonments Allows standard or latched gun trigger

Item 1 2 3 4

5 4

- 28 -

Description Wirespeed Control Welding Voltage Control Voltage Control Switch Connections for Water-Cooled MIG Gun MIG Torch Euro Adaptor

70.00 70.00 70.00 70.00 70.00 70.00

WELDING EQUIPMENT

400 MST Wire Feed Unit

WELDING EQUIPMENT

MIG (GMA) TIG (GTAW) STICK (SMAW) INVERTER

>>>>

50HZ

1 PHASE

CC/CV

DC >>>>

>>>>

220 GMS 1ph 230V Input, 220A Compact Multi Process Inverter with 15kg Mig, Lift Tig, Stick Process

MIG

Part Number 10-9330

LIFT TIG

STICK

Duty Cycle @ Rated Output 35% @ 220A 60% @ 170A

Output Range 3 - 220 Amps

Dimensions (H x W x D) 460 x 279 x 570 mm

Part No. 10-9330

Net Weight 19 kg

Description List TA 220 GMS Compact 220 Amp MIG Inverter with Stick and Lift TIG facility with 0.6/0.8mm feed roll (U45806), mains cable and operating manual OPTIONS AND ACCESSORIES 020212/SA Universal Trolley 2187 0.6/0.8mm Hard Wire V groove feed roll 2189 1.0/1.2mm Hard Wire V groove feed roll 2269 1.0/1.2mm Soft Wire U groove feed roll 304.080.407 SA.17.4 4m Euro-kwik connector style TIG torch 304.080.807 SA.17.8 8m Euro-kwik connector style TIG torch WS220XE-10-3035 WS220XE-12-3035

Tweco Weldkill 200A MIG Torch, 3m Tweco Weldkill 200A MIG Torch, 3.6m

357.00 36.55 36.55 36.55 120.49 145.43 94.34 100.70

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

1ph. 230v Variable IP23 2 Years

Price ÂŁ 2108.00

Hard Wire Soft Wire

1 - 15 m/min 2 Roll 0.6-1.0mm 0.6-1.0mm

Features

Benefits

Thermal Overload protection with Indicator Reverse Polarity Facility Spot Timer Control Stitch Timer Control

Alerts operator if duty cycle is exceeded or airflow is blocked Allows use of self shielding wires for outdoor applications Allows trigger to time out to give uniform tacks Allows operator to set dedicated on/off times to produce uniform short runs Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Gives precise adjustment of output voltage to give control of heat input Gives arc transfer adjustment to improve weld quality and significantly reduce spatter

Adjustable Burn Back Control Trigger Latching Facility Variable Voltage Control Variable Inductance Control

Item 1

2 3

3 4

5 5

6 6 - 29 -

Description Main control knob for adjustment of output current, wire feed speed and touch pad key functions Control knob for adjustment of output voltage and down slope time Control knob for adjustment of inductance Selection key for Gas purge, cold wire inch and burn back functions Selection key for 2/4 stroke welding mode, intermittent MIG welding and spot MIG welding Selection key for welding modes, TIG, MIG and Stick

>>>>

50HZ

3 PHASE

CC/CV

>>>>

DC >>>>

300 GMS 3ph 400V Input, 300A Digital Mig Inverter in compact design with variable voltage and inductance control and full waveform set up features with memory for Mig, Lift Tig & Stick. Process

MIG

LIFT TIG

STICK

Part Number 10-9407

Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight 35% @ 300A 3 - 300 Amps 460 x 279 x 570 mm 25 kg 60% @ 260A Part No. Description List Price £ 10-9407 TA 300 GMS Digital Mig Inverter with 1.0/1.2 solid wire drive rolls, 3027.00 mains cable & Operating manual OPTIONS AND ACCESSORIES 020212/SA Universal Trolley 357.00 2187 0.6/0.8mm Hard Wire V groove feed roll 36.55 2189 1.0/1.2mm Hard Wire V groove feed roll 36.55 2269 1.0/1.2mm Soft Wire U groove feed roll 36.55 2319 1.0/1.2mm Cored Wire groove feed roll 36.55 304.090.407 SA.26.4 4m Euro-kwik connector style TIG torch 168.68 304.090.807 SA.26.8 8m Euro-kwik connector style TIG torch 191.81 161.560.307 161.560.407 161.560.457

TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) TWE4.45E 400A Air-Cooled MIG Torch, 4.5m (60% @ 340A)

153.15 161.66 168.74

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v Variable IP23 2 Years

Hard Wire Soft Wire

1 - 18 m/min 4 Roll 0.6-1.2mm 0.8-1.2mm

Features

Benefits

Thermal Overload protection with Indicator Reverse Polarity Facility Spot Timer Control Stitch Timer Control Adjustable Burn Back Control

Alerts operator if duty cycle is exceeded or airflow is blocked Allows use of self shielding wires for outdoor applications Allows trigger to time out to give uniform tacks Allows operator to set dedicated on/off times to produce uniform short runs Gives precise wire burn back for diameter of wire and good re-striking capability Allows trigger to be released for continuous long weld runs Gives precise adjustment of output voltage to give control of heat input Gives inductance adjustment from 0 - 100% for complete control of Arc transfer to improve weld quality and significantly reduce spatter Gives precise and consistent wire feeding for full operator control Allows 25 programmes for full parameter and settings to be saved and easily set up on the unit

Trigger Latching Facility Variable Voltage Control Variable Inductance Control Digital signal motor drive Memory Storage F11

F12

F7 F10

F13

F14 F16

F17 F18 F19

F21

F15 F20

F2 F1

F6 Item Description F5

F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11

Setting key for ‘Load’ program Setting key for ‘Save’ program Voltage adjustment knob ’Seconds’ indicator on ‘9’ display Setting key for ‘set up’ program ‘Set up’ program indicator ‘Volt’ indicator on ‘9’ display ‘%’ indicator on ‘9’ display Digital display Digital display ‘Amps’ indicator on ‘10’ display

- 30 -

F12 F13 F14 F15 F16 F17 F18 F19 F20 F21

Power supply fault indicator Water cooling fault indicator m/min indicator on ‘10’ display TIG welding indicator WFS adjustment knob MIG welding indicator Setting key for welding mode Setting key for 2/4 stroke MMA welding indicator Indicator 4 strokes welding

WELDING EQUIPMENT

MIG (GMA) TIG (GTAW) STICK (SMAW) INVERTER

WELDING EQUIPMENT

MIG (GMA) TIG (GTAW) STICK (SMAW) INVERTER

>>>>

3 PHASE

50HZ

CC/CV

DC >>>>

>>>>

400 GMS 3ph 400V Input, 400A Digital Mig Inverter with separate Wire Feeder featuring variable voltage and inductance control and full waveform set up features with memory for Mig, Lift Tig & Stick. Process Part Number 10-9408 Part No. 10-9408

MIG

LIFT TIG

STICK

Duty Cycle @ Rated Output Output Range Dimensions (H x W x D) Net Weight 40% @ 400A 3 - 400 Amps PS: 460 x 279 x 716 mm 49 kg 100% @ 300A WFU: 460 x 279 x 568 mm Description List Price ÂŁ TA 400 GMS Digital Mig Inverter with separate wire feed unit, 4433.00 2m interconnection cable,1.0/1.2 solid wire drive rolls, mains cable & Operating manual

OPTIONS AND ACCESSORIES 020214-GT Trolley 030372-500-2-A/TH 2M W/C Interconnection Cable 030372-500-5-A/TH 5M W/C Interconnection Cable 030372-500-10-A/TH 10M W//C Interconnection Cable 020255-AR/TH Water Cooler 030153 Wire Feed Unit Wheel Kit U450810AC 0.8 / 1.0mm Hard Wire V groove feed roll U451012AC 1.0 / 1.2mm Hard Wire V groove feed roll U451216AC 1.2 / 1.6mm Hard Wire V groove feed roll U451012AL 1.0 / 1.2mm Soft Wire U groove feed roll U451216AL 1.2 / 1.6mm Soft Wire U groove feed roll U451216FR 1.2 / 1.6mm Cored Wire groove feed roll U452024FR 2.0 / 2.4mm Cored Wire groove feed roll 20207 Dust Filter Kit F03040 Pack of 10 Filters

785.00 440.00 600.00 845.00 1400.00 285.00 70.00 70.00 70.00 70.00 70.00 70.00 70.00 185.00 45.00

Recommended Torches 161.560.307 TWE4.3E 400A Air-Cooled MIG Torch, 3m (60% @ 340A) 161.560.407 TWE4.4E 400A Air-Cooled MIG Torch, 4m (60% @ 340A) 552.316.307 SW450.3F 450A Water-Cooled MIG Torch, 3m (60% @ 450A) 552.316.407 SW450.4F 450A Water-Cooled MIG Torch, 4m (60% @ 450A)

Machine Specifications

Wire Feed System Specifications

Mains Input Voltage Arc Voltage Range Protection Class Warranty Period

Wire Feed Speed Range Wire Drive Type Wire Diameter Range

3ph. 400v Variable IP23 2 Years

Hard Wire Soft Wire

153.15 161.66 292.36 312.29 1 - 20 m/min 4 Roll 0.8-1.6mm 1.0-1.6mm

Features

Benefits

Water Cooling Indicator Thermal Overload Indicator Reverse Polarity Facility Spot Time Stitch Time Burn Back Trigger Latch Variable Voltage Variable inductance

When water cooled indicates when level is low, protecting mig torch Alerts operator if duty cycle is exceeded or airflow is blocked. Enables use of various flux cored wires Allows trigger to time out to give uniform tacks Allows operator to set times to produce uniform short runs Gives wire burn back times for different wire materials Allows trigger to be released for continuous welding Gives precise control of output voltage Gives adjustment to arc transfer improving arc stability - 31 -

ARCMASTER 3.1 SERIES CART Suitable for Arcmaster 300S, 400S, 300TS, 400TS, 400MST and 300 AC/DC Fits Power Source only or Power Source and Cooler Part No.: CRT.ARCM3.1

List Price: £422.00

THERMAL ARC UNIVERSAL TROLLEY Suitable for Arcmaster 200S, 200TS, 200 AC/DC, TA 300WTE, 220GMS and 300GMS. Fits Power Source only Part No.: 020212/SA List Price: £357.00

THERMAL ARC HD INVERTER CART Suitable for TA 250TE and 220 ACDC Fits Power Source only or Power Source and Cooler Part No.: 020218/MT List Price: £578.00

POWERMASTER 320SP TROLLEY Suitable for Powermaster 320SP Fits Power Source only or Power Source and Cooler Part No.: W4000300 List Price: £504.90

- 32 -

WELDING EQUIPMENT

Workshop Carts

CUTTING EQUIPMENT

PLASMA CUTTING DRAG-GUN PLUS 1ph, 50/60Hz, 230v Input / 35 amp Output 9mm Genuine Cut Capacity

System Specifications Cut Capacity

Input

Output

Duty Cycle

Dimensions

Weight

9mm

230V +/-10%, 1ph, 50/60 Hz, 18 Amps

15 - 30 Amps Continuously Adjustable

35% @ 35 Amps

H: 279mm W: 267mm L: 394mm

Net Wt. 25.7 kg

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No.

Description

List Price ÂŁ

1-3835-4

Drag-Gun Plus

2055.00

Includes Power Supply, PCH-42ER Torch with 6.1m leads, Input Power Cable, Work Cable & Clamp, Spare Parts Kit and Operating Manual

1-3835-4F

Drag-Gun Plus (fitted with Air Dryer Kit for environments with high humidity or fluctuating temperatures)

2195.00

Includes Power Supply, PCH-42ER Torch with 6.1m leads, Input Power Cable, Work Cable & Clamp, Spare Parts Kit and Operating Manual

REPLACEMENT TORCH AND PARTS 7-4220 9-8442 9-6501 9-6542 9-6507 9-6003

PCH-42ER (70o) Hand Torch and Lead package 6.1m 70o Torch Head Tip - 40A SureLok Electrode Gas Distributor Shield Cup - Heavy Duty

Pack Qty 1 1 10 5 1 1

358.18 171.40 2.76 4.81 10.66 12.85

OPTIONS AND ACCESSORIES 3-3837 7-7501 9-1260

Air Dryer Kit Cutting Guide Kit Leather Leads Cover

291.45 69.20 72.25

Features - Built in air compressor brings maximum convenience and portability - Ready to cut right out of the box - just plug it in - Powerful performance - Maximum Arc visibility for excellent operator control - 2 Year Warranty Machine / 1 Year Warranty Torch

- 33 -

CUTSKILLTM 35A 1ph, 50/60Hz, 230v Input 35 Amp Output 10mm Cut Capacity

Cut Capacity

Input

Output

Duty Cycle

Dimensions

Weight

10mm

230V, 1 ph,

35 Amps

30% @ 35 Amps

H: 280mm W: 133mm L: 419mm

Net Wt. 11.8 kg

16 Amps, 50/60 Hz

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No.

Description

1-1604-4

Cutskill 35A

List Price £ 1090.00

Includes Power Supply, SL40 Torch with 4.5m leads, Input Power Cable, Work Cable & Clamp, Spare Parts, Carry Case and Operating Manual

REPLACEMENT TORCH AND CONSUMABLES 7-0041 SL40, (75o) Hand Torch and Lead package, 4.5m 9-0091 Tip - 35A 9-0096 Electrode 9-0097 Start Cartridge 9-0098 Shield Cup

Pack Qty 189.52 1 5 2.42 5 3.53 1 11.44 1 10.27

Features -

Precision-engineered consumable parts are easy to change and require no tools Easy-to-use torch trigger release and ergonimic handle provide comfort during long cutting sessions New SL40 Torch features excellent arc visibility Surelok® electrode eliminates tip wobble found in some blow-apart torch designs, resulting in a cleaner arc and longer parts life - Carry Case for maximum portability - 2 Year Warranty Machine / 1 Year Warranty Torch

- 34 -

CUTTING EQUIPMENT

PLASMA CUTTING

CUTTING EQUIPMENT

PLASMA CUTTING

g Q2 n i Com 11 20

CUTMASTERTM 12 PLUS 1ph, 50/60Hz, 110v / 230v Input 40 Amp Output 12mm Genuine Cut Capacity

System Specifications Cut Capacity

Input

Output

Duty Cycle

Dimensions

Weight

12mm (230V)

110V / 230V, 1 ph,

8mm (110V)

16 Amps, 50/60 Hz

40 Amps (230v) 27Amps (110v)

230V: 40%@40A 110V: 30%@30A

H: 228 mm W: 117 mm L: 470 mm

Net Wt. 11.8 kg

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No. Description 1-4200-4

List Price £

CutMaster 12 Plus Includes Power Supply, SL40TMTorch with 4.5m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual

REPLACEMENT TORCH AND CONSUMABLES 7-0040 9-0091 9-0093 9-0094 9-0096 9-0097 9-0098

SL40, (75o) Hand Torch and Lead package, 4.5m with ATC Connector Drag Tip - 20-35A Drag Tip - 40A Standard Cutting Tip - 40A Electrode Start Cartridge Shield Cup

1790.00

Pack Qty 1 216.94 5 2.42 5 2.42 5 2.42 5 3.53 1 11.44 1 10.27

NEW SL40 Torch features

Minimises gas consumption by recycling wasted vent gas as shield gas

Features -

Automatic voltage linking to 115V / 230V input power Lighter weight design for maximum portability New SL40 Torch features excellent arc visibility SL40 Torch with Vent2Shield ( ) technology allows the use of smaller compressors compared to similar 40 Amp units. Surelok® electrode eliminates tip wobble found in some blow-apart torch designs, resulting in a cleaner arc and longer parts life Precision-engineered consumable parts are easy to change and require no tools Easy-to-use torch trigger release and ergonimic handle provide comfort during long cutting sessions 3 Year Warranty Machine / 1 Year Warranty Torch - 35 -

CUTMASTERTM 12 3ph, 50/60Hz, 400v Input 40 Amp Output 12mm Genuine Cut Capacity

System Specifications Cut Capacity

Input

Output

Duty Cycle

Dimensions

Weight

12mm

400V, 3 ph,

40 Amps

60% @ 40 Amps

H: 381mm W: 305 mm L: 610mm

Net Wt. 19.5 kg

8 Amps, 50/60 Hz

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No. Description 1-5130-4 1-5131-4

List Price ÂŁ

CutMaster 12 - 6.1m leads with ATC Connector CutMaster 12 - 15.2m leads with ATC Connector Includes Power Supply, SL60TMTorch with 6.1m or 15.2m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual

REPLACEMENT TORCH AND PARTS 7-5204 9-8219 9-8207 9-8208 9-8215 9-8213 9-8218

SL60, (75o) Hand Torch and Lead package, 6.1m with ATC Connector 75o Torch Head Drag Tip - 40A Standard Cutting Tip - 40A Electrode Start Cartridge Standard Shield Cup

2000.00 2130.00

Pack Qty 1 361.57 1 210.61 5 4.04 5 4.04 5 5.89 1 16.83 1 15.11

For the full range of 1Torch consumables and torches, please refer to pages 42 and 43

OPTIONS AND ACCESSORIES 7-7507 Air Filter Kit 9-7741 Replacement Filter Cartridge 7-7501 Basic Cutting Guide Kit 7-8910 Cutting Guide Kit Deluxe 7-8888 Multi-Purpose Cart 7-8911 Straight Line Cutting Guide 9-1260 Leather Lead Cover 6.1m 9-1280 Leather Lead Cover 15.2m

84.09 23.02 69.20 170.80 181.00 180.59 72.25 144.48

Features - Front Panel LED's indicate status conditions for maximum efficiency - Trigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the pilot arc while cutting expanded metals - True Guard roll bar provides easy transportation and protection for unmatched durability - Lighter weight design for maximum portability - Storage compartment for convenient access to spare parts and consumables - Versatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined extension and lead length of up to 30.5m - 3 Year Warranty Machine / 1 Year Warranty Torch - 36 -

CUTTING EQUIPMENT

PLASMA CUTTING

CUTTING EQUIPMENT

PLASMA CUTTING CUTMASTERTM 20 3ph, 50/60Hz, 400v Input 60 Amp Output Adjustable 20mm Genuine Cut Capacity

System Specifications Cut Capacity 20mm

Input

Output

Duty Cycle

Dimensions

Weight

400V, 3 ph,

60 Amps

40% @ 60 Amps

H: 381mm W: 305mm L: 610mm

Net Wt. 19.5 kg

16 Amps, 50/60 Hz

SYSTEM PACKAGE Part No. Description 1-1130-4 1-1131-4

List Price ÂŁ

CutMaster 20 - 6.1m leads with ATC Connector CutMaster 20 - 15.2m leads with ATC Connector Includes Power Supply, SL60TMTorch with 6.1m or 15.2m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual

REPLACEMENT TORCH AND PARTS 7-5204 9-8219 9-8210 9-8252 9-8215 9-8213 9-8218

SL60, (75o) Hand Torch and Lead package, 6.1m with ATC Connector 75o Torch Head Cutting Tip - 60A Drag Tip - 60A Electrode Start Cartridge Standard Shield Cup

2595.00 2725.00

Pack Qty 1 361.57 1 210.61 5 4.04 5 5.90 5 5.89 1 16.83 1 15.11

For the full range of 1Torch consumables and torches, please refer to pages 42 and 43

84.09 23.02 69.20 170.80 181.00 180.59 72.25 144.48

CUTMASTERTM 25 3ph, 50/60Hz, 400v Input 80 Amp Output 25mm Genuine Cut Capacity

System Specifications Cut Capacity

Input

Output

Duty Cycle

Dimensions

Weight

25mm

400V, 3 ph,

80 Amps

40% @ 80 Amps

H: 381mm W: 305mm L: 610mm

Net Wt. 19.5 kg

20 Amps, 50/60 Hz

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No. Description 1-1330-4 1-1331-4

List Price ÂŁ

CutMaster 25 - 6.1m leads with ATC Connector CutMaster 25 - 15.2m leads with ATC Connector Includes Power Supply, SL60TMTorch with 6.1m or 15.2m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual

REPLACEMENT TORCH AND PARTS Pack Qty 1 7-5204 SL60, (75o) Hand Torch and Lead package, 6.1m with ATC Connector 1 9-8219 75o Torch Head 5 9-8211 Cutting Tip - 80A 5 9-8215 Electrode 1 9-8213 Start Cartridge 1 9-8218 Standard Shield Cup

3135.00 3265.00

361.57 210.61 4.04 5.89 16.83 15.11

For the full range of 1Torch consumables and torches, please refer to pages 42 and 43

84.09 23.02 69.20 170.80 181.00 180.59 72.25 144.48

Features - Front Panel LED's indicate status conditions for maximum efficiency - Trigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the pilot arc while cutting expanded metals - True Guard roll bar provides easy transportation and protection for unmatched durability - Tip SaverTM current fold back circuit design prevents tip failure when the tip touches the work piece at high output current levels resulting in prolonged consumable parts life - Lighter weight design for maximum portability - Storage compartment for convenient access to spare parts and consumables - Versatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined extension and lead length of up to 30.5m - 3 Year Warranty Machine / 1 Year Warranty Torch - 38 -

CUTTING EQUIPMENT

PLASMA CUTTING

CUTTING EQUIPMENT

PLASMA CUTTING CUTMASTERTM 35 3ph, 50/60Hz, 400v Input 100 Amp Output 35mm Genuine Cut Capacity

System Specifications Cut Capacity

Input

Output

Duty Cycle

Dimensions

Weight

35mm

400V, 3 ph,

100 Amps

80% @ 100 Amps

H: 381mm W: 305mm L: 762mm

Net Wt. 28.1 kg

27 Amps, 50/60 Hz

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No. Description 1-1730-4 1-1731-4

List Price ÂŁ

CutMaster 35 - 6.1m leads with ATC Connector CutMaster 35 - 15.2m leads with ATC Connector Includes Power Supply, SL100TMTorch with 6.1m or 15.2m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual

REPLACEMENT TORCH AND PARTS Pack Qty 1 7-5206 SL100, (75o) Hand Torch and Lead package, 6.1m with ATC Connector o 1 9-8219 75 Torch Head 5 9-8212 Cutting Tip - 100A 5 9-8215 Electrode 1 9-8213 Start Cartridge 1 9-8218 Standard Shield Cup

4435.00 4562.00

361.57 210.61 4.04 5.89 16.83 15.11

For the full range of 1Torch consumables and torches, please refer to pages 42 and 43

OPTIONS AND ACCESSORIES 7-7507 9-7741 7-7501 7-8910 7-8888 7-8911 9-1260 9-1280

Air Filter Kit Replacement Filter Cartridge Basic Cutting Guide Kit Cutting Guide Kit Deluxe Multi-Purpose Cart Straight Line Cutting Guide Leather Lead Cover 6.1m Leather Lead Cover 15.2m

84.09 23.02 69.20 170.80 181.00 180.59 72.25 144.48

Features - Front Panel LED's indicate status conditions for maximum efficiency - Trigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the pilot arc while cutting expanded metals - True Guard roll bar provides easy transportation and protection for unmatched durability - Tip SaverTM current fold back circuit design prevents tip failure when the tip touches the work piece at high output current levels resulting in prolonged consumable parts life - Lighter weight design for maximum portability - Storage compartment for convenient access to spare parts and consumables - Versatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined extension and lead length of up to 30.5m - 3 Year Warranty Machine / 1 Year Warranty Torch - 39 -

CUTMASTERTM 40 3ph, 50/60Hz, 400v Input 120 Amp Output 40mm Genuine Cut Capacity

System Specifications Cut Capacity

Input

Output

Duty Cycle

Dimensions

Weight

40mm

400V, 3 ph,

120 Amps

40% @ 120 Amps

H: 381mm W: 305mm L: 762mm

Net Wt. 28.1 kg

32 Amps, 50/60 Hz

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No.

Description

List Price ÂŁ

1-1930-4 1-1931-4

CutMaster 40 - 6.1m leads with ATC Connector CutMaster 40 - 15.2m leads with ATC Connector Includes Power Supply, SL100TMTorch with 6.1m or 15.2m leads, Input Power Cable, Work Cable & Clamp, Spare Parts and Operating Manual

4920.00 5049.00

REPLACEMENT TORCH AND PARTS Pack Qty 1 361.57 7-5206 SL100, (75o) Hand Torch and Lead package, 6.1m with ATC Connector 1 210.61 9-8219 75o Torch Head 5 9-8253 Cutting Tip - 120A 4.73 5 9-8215 Electrode 5.89 1 9-8213 Start Cartridge 16.83 1 9-8218 Standard Shield Cup 15.11 For the full range of 1Torch consumables and torches, please refer to pages 42 and 43

84.09 23.02 69.20 170.80 181.00 180.59 72.25 144.48

Features - Front Panel LED's indicate status conditions for maximum efficiency - Trigger latch feature prevents hand fatigue during long cuts. Auto pilot restart instantly re-ignites the pilot arc while cutting expanded metals - True Guard roll bar provides easy transportation and protection for unmatched durability - Tip SaverTM current fold back circuit design prevents tip failure when the tip touches the work piece at high output current levels resulting in prolonged consumable parts life - Lighter weight design for maximum portability - Storage compartment for convenient access to spare parts and consumables - Versatile 1Torch with ATC disconnect makes it easy to add lead extensions offering a combined extension and lead length of up to 30.5m - 3 Year Warranty Machine / 1 Year Warranty Torch - 40 -

CUTTING EQUIPMENT

PLASMA CUTTING

CUTTING EQUIPMENT

PLASMA CUTTING PAK 200 3ph, 50/60Hz, 400v Input 35 - 200 Amp Output Adjustable 40mm Genuine Cut Capacity

System Specifications Cut Capacity 40mm

Input 400V, 3 ph, 77 Amps, 50/60 Hz

Output

Duty Cycle 100% @ 200 Amps

35 - 200 Amps

Dimensions H: 1238mm W: 700mm L: 978mm

Weight Net Wt. 221 kg

SYSTEM ORDERING INFORMATION SYSTEM PACKAGE Part No. Description 1-1541 Pak 200 400V CE complete system with 70° torch and 7.6m Leads 1-1542 Pak 200 400V CE complete system with 70° torch and 15.2m Leads 3-0005 Pak 200 P.S. Only 400V CE

List Price £ 21300.00 21660.00 19960.00

Includes Power Supply, Ground Cable & Clamp and Coolant - (Note: spare parts are not included)

TORCH AND LEADS PACKAGES 2-0009 70 degree 7.6m 1612.07 2-0010 70 degree 15.2m 1998.06 2-0015 180 degree 7.6m 1881.29 2-0016 180 degree 15.2m 2108.34

OPTIONS AND ACCESSORIES 7-7505 Torch Guide/Circle Cutting Attachment 100.33 9-2146 3m Plasma Supply Hose 62.01 9-2147 Secondary Supply Hose 41.41 7-3460 Remote Pendant Control 142.28

TORCH CONSUMABLE PARTS 32-1325 32-1326 32-1527 32-1323 32-1330 32-1321 32-1322 32-1320 32-1512 32-1513 32-1514

Shield Cup, Standard Crown Shield Cup (manual cutting) Shield Cup Gouging Tip, 200A Tip, 150A Tip, 70A Tip, 55A Tip, 35A Tip (0.110) Gouging Tip (0.125) Gouging Tip (0.156) Gouging

41.43 46.55 45.98 7.38 7.38 7.38 7.38 7.38 20.43 20.43 20.43

32-1515 32-1315 32-1509 32-1310 32-1311 32-1504 32-1505 32-1502 20-0001 8-4025 9-4173

Tip (0.171) Gouging Gas Distributor, Cutting Gas Distributor, Gouging Electrode, Air Cutting Electrode, Multi-Gas Cutting Electrode, Air, Gouging Electrode, ArH2, Gouging Coolant Tube Extension, Gouging Wrench O-Ring Lubricant Parts Box

Features -

Up to 200 amps output for faster cuts 100% duty cycle at 200 amps Energy efficient inverter technology Dual gas capability for significant improvement in cut quality control MaximumLife® Parts Exclusive Tip Saver™ Circuit Smart Start™ auto pilot restart Smart Logic™ over voltage protection - 41 -

20.43 29.52 59.03 10.78 10.78 32.35 32.35 17.03 32.61 5.06 35.99

Part No.

SL60 and SL100 TORCHES TM

Description

List Price £

TORCHES STANDARD RPT (O2B) SL60TM 60 Amp 75o 6.1m SL60TM 60 Amp 75o 15.2m SL100TM 100 Amp 75o 6.1m SL100TM 100 Amp 75o 15.2m

7-5200 7-5201 7-5202 7-5203

315.87 401.90 315.87 401.90

TORCHES ATC CONNECTOR SL60TM 60 Amp 75o 6.1m ATC SL60TM 60 Amp 75o 15.2m ATC SL100TM 100 Amp 75o 6.1m ATC SL100TM 100 Amp 75o 15.2m ATC

7-5204 7-5205 7-5206 7-5208

1TORCH

361.57 495.97 361.57 495.97

SL100 MECHANISED TORCHES TM

STANDARD RPT (O2B) TORCH CONNECTION SL100 Machine Torch - Standard (Fibreglass Tube w/Rack) SL100TM 100 Amp 180o 7.6m SL100TM 100 Amp 180o 15.2m

7-5209 7-5210

326.60 392.63

Remote Interface Adapter 7-3542 included with torch

ATC TORCH CONNECTION SL100 Machine Torch w/ATC - Standard (Fibreglass Tube w/Rack) SL100TM 100 Amp 180o 7.6m SL100TM 100 Amp 180o 15.2m

7-5215 7-5216

1TORCH

498.56 587.65

ATC OPTION PARTS ATC OPTION PARTS

7-5207

ATC Receptacle Adapter

79.54

This receptacle adapter is required for each power supply using an ATC torch connection. This is connected to the torch adapter kit specific to each power supply

7-7544 7-7545 7-7552

ATC Lead Extension 4.6m ATC Lead Extension 7.6m ATC Lead Extension 15.2m

183.26 215.76 410.91

7-3460

Remote Pendant Control

142.28

- 42 -

CUTTING EQUIPMENT

1TORCH

CUTTING EQUIPMENT

Universal Standoff Cutting Guide Part No 9-8422

Electrode

Start Cartridge

Shield Cup

Tip

Shield Cup Body

Drag Shield Cap

Gouging Deflector Shield Cap

™

CUTMASTER TRUE Standoff Cutting Guides Part No 9-8281 (CUTMASTER 12, 20, 25, 35 & 40)

1Torch Consumables List Pack Qty Price £

Part No

Description

9-8205

Tip, Cutting, 20A, Drag

4.04

9-8206

Tip, Cutting, 30A, Drag

4.04

9-8207

Tip, Cutting, 40A, Drag

4.04

9-8208

Tip, Cutting, 40A

4.04

9-8209

Tip, Cutting, 50/55A

4.04

9-8219

SL60/SL100 75 Torch Head

210.61

9-8210

Tip, Cutting, 60A

4.04

4-7830

SL60 Hand Lead Package (O2B) 6.1m

198.42

9-8211

Tip, Cutting, 80A

4.04

4-7832

SL100 Hand Lead Package (O2B) 6.1m

198.42

9-8212

Tip, Cutting, 90/100A

4.04

4-7833

SL100 Hand Lead Package (O2B) 15.2m

286.74

9-8213

Start Cartridge

16.83

4-7834

SL60 Hand Lead Package (ATC) 6.1m

217.62

5.89

4-7835

SL60 Hand Lead Package (ATC) 15.2m

245.78

4-7836

SL100 Hand Lead Package (ATC) 6.1m

217.62

4-7837

SL100 Hand Lead Package (ATC) 15.2m

245.78

9-8215

Electrode, Maximum Life

9-8218

Standard Shield Cup

15.11

9-8225

Tip, Gouging, 40A

5.00

9-8226

Tip, Gouging, 60A

5.00

9-8227

Tip, Gouging, 80A

5.00

9-8228

Tip, Gouging, 100A

5.00

9-8254

Tip, Gouging, 120A

5.00

9-8231

Tip, Cutting, 70A

9-8253

Tip, Cutting, 120A

9-8252

1Torch Repair Parts Part No

Description

List Price £ o

9-7030

SL60/SL100 75 Torch Handle Kit

42.24

9-7031

SL60/SL100 Switch Assembly

17.09

9-7034

SL60/SL100 Torch Trigger Assembly

23.90

4.04

5-2550

*Spare Parts Kit, 30 Amp

125.45

4.73

5-2551

*Spare Parts Kit, 40 Amp

125.45

Tip, Drag, 60A

5.90

5-2552

*Spare Parts Kit, 50/55 Amp

125.45

9-8235

Shield Cap, Drag 50-60A

9.48

9-8236

Shield Cap, Drag 70-100A

9.48

5-2553

*Spare Parts Kit, 60 Amp

125.45

9-8258

Shield Cap, Drag 120A

9.48

5-2554

*Spare Parts Kit, 70 Amp

125.45

9-8237

Shield Cup Body, Maximum Life 1

32.00

5-2555

*Spare Parts Kit, 80 Amp

125.45

9-8238

Shield Cap, Mach. 50-60A

8.61

5-2556

*Spare Parts Kit, 90/100 Amp

131.10

9-8239

Shield Cap, Mach. 70-100A

8.61

9-8241

Shield Cap, Gouging

9.48

9-8243

Shield Cap, Deflector

9-8422

Standoff Cutting Guide

1 1

17.28

9-8251

Standoff Cutting Guide

15.17

Standoff Cutting Guide

15.17

Ohmic Clip

18.30

9-8281 9-8224

10.70

(Note: All *Spare Parts Kits shown above include ten (10) Tips, five (5) Electrodes and one (1) Start Cartridge.)

- 43 -

The model of the plasma cutting system or torch must be known to determine the adapter kit required

Manufacturer Power Supply Model

Adapter Kit Part Number

Manufacturer Torch Model

“EURO” Style Connection Machine Brands

“Euro” Adapter Kit Part Number

“EURO” Style Connection Torch Brands

Adapter Kit Part Number Part Number 7-3470EL

LINCOLN, EWS, CASTOLIN, CEBORA, SELCO 7-3470EL CEMONT, HELVI, CEA, STEL, CIFI, FRIMAR, JACKLE

TRAFIMET, BINZEL, CEBORA, TEC.MO

HYPERTHERM®

A60, A80, A81 (non Euro)

7-3437EL

A90, A101 (non Euro)

7-3474EL

Powermax® 380 Powermax® 600 w/Int. Q.D. Powermax® 1000, 1250 Powermax® 800. 900 Powermax® 1100 Powermax® 1650 Max® 42, 43, 40cs Max® 40, HT 40 (HF Start) Max® 70, 80,100 w/wo Q.D.

7-3477 7-3480 7-3461 7-3481 7-3455 7-3483 7-3454 7-3430

BINZEL® PSB 30 (non Euro) PSB31, PSB 60/80 (non Euro)

7-3472EL 7-3473EL

CEBORA® P35, P50, P70 (non Euro)

7-3438EL

SAF®

ESAB® (yellow) CaddyCut, PCM-SMi, 500i, 625i, PCS-43, HandyPlasma 50 PCS-53, 80, 90 ESP-100i, LPH 120 LPH 50/80, PCM-750i, 875, 1000i, 1125, HandyPlasma 70 Sidewinder 30, 55, 105

TRAFIMET

Z1.0, Z2.0, Z3.0, CP40R, CP100R

7-3471EL

7-3425 7-3435 7-3426 7-3429 7-3434EL

CEBORA

Prof 36, 52, 70

SAF

7-3471EL

Zip 1.0, 2.0, 3.0, 4.0, Prestozip 615, Prestozip 2, Nertazip 215, 525/225, 540

MILLER

7-3471EL

*Plazcut 60/Zipcut

Spectrum 250D, 500, 750 Spectrum 700, 1000, 1250, PLUS Spectrum 3080 Spectrum 701, 2050, 650 Spectrum 300 Spectrum 375

7-3432 7-3433 7-3430 7-3456 7-3457 7-3476 7-3477

OERLIKON® CITOARC AP15-1, AP25-2, AP217, AP225 7-3471EL

THERMAL DYNAMICS® PAK® 3XR, 5XT, 5XR, 6XR, 7XR, 625XR, 750XR 7-3446

PAK® 8XR, 10XR, 1000XR, 1250XR, PakMaster 75, 100 PakMaster 50XL/XLP, 75XL/XLP, 100XL/XLP CUTMASTER 50, 75, 80XL, 100 PakMaster 25, 38XL, EconoPAK® 25 Drag-Gun® 38, PAK® 4Xi, 6Xi PAK® 2XT-220, Dynapak® 110 PakMaster 50 w/ Smart Torch (Q.D.) EconoPAK® 50 EconoPAK® 100 PAK® 5 PAK® 10

7-3434

TM TM

7-3447

7-3443 7-3445 7-3449 7-3450 7-3444 7-3436

* The Miller PlazCut machines with Serial Numbers beginning JE are not compatible with 1TorchTM RPT Torches. NOTES: The maximum current output of some of the Power Supplies listed can exceed the maximum rating of the torch. Do not operate the selected RPT Replacement Torch at current levels above the rating of the torch. Each Adapter Kit includes connection fitting, electrical connectors and installation instruction sheets for the selected power supply. CEBORA is a registered trademark of Cebora S.p.A.; DAIHEN is a registered trademark of Daihen Inc.; ESAB and L-TEC are registered trademarks of ESAB AB; HARRIS and LINCOLN are registered trademarks of Lincoln Electric Co.; HOBART is a registered trademark of Hobart Brothers Co.; HYPERTHERM, Max and powermax are registered trademarks of Hypertherm, Inc.; MILLER and Spectrum are registered trademarks of Miller Electric Mfg. Co.; MULTIQUIP is a registered trademark of Multiquip, Inc.; NU-TECSYS is a registered trademark of Nu-Tecsys, Inc.; P-TRON is a registered trademark of P-Tron Plasma/Tech Systems; SMITH is a registered trademark of Smith Equipment Co.; INNERLOGIC is a trademark of Innerlogic; THERMAL DYNAMICS, PAK, CUTMASTER, PakMaster, EconoPAK, Dynapak and Drag-Gun are registered trademarks of Thermal Dynamics Corp. - 44 -

CUTTING EQUIPMENT

Torch Adapter Kits

CUTTING EQUIPMENT

Accessories ®

Thermal Dynamics offers accessories to help improve cutting performance.

TORCH CUTTING GUIDES / GUIDE KITS Cutting Guide Kit (Deluxe) Cat. No. 7-8910 List Price - £170.80 PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER), 1Torch Cuts circles from 54mm to 1054mm with proper cutting attachments. This kit includes easy add-on attachments to fit most Thermal Dynamics torches for precise straight line, circle cutting and bevelling. Includes Carrying Case, Radius/Roller Kit (7-7501), Circle Cutting Guide Kit (7-3291), Magnetic Pivot, Suction Pivot. Circle Cutting Guide Kit Cat. No 7-3291 List Price - £118.11 PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER), 1Torch Cuts 54mm to 705mm circles (using magnetic attachment) when cutting or bevelling is required. For use with most Thermal Dynamics torches. Guide shown with optional pivot (7-3148). Radius / Roller Cutting Guide Kit Cat. No. 7-7501 List Price - £69.20 PCH 10,25,26,28,35,40,42,60,62,75,76,80,100XL,102, RPT 28, 100R(ER) 1Torch (not circles only radius) This easy-to-use guide cut circles from 76mm up to 730mm. Maintains a consistent height off the work piece whether you are using the circle cutting attachment for cutting circles or the roller guide feature to improve your straightline cutting. Both novices and experts will see noticeable improvement in quality, speed and parts life. Can be used with most Thermal Dynamics torches.

Straight Line Cutting Guide Cat. No 7-8911 List Price - £180.59 Introducing a new cutting guide accessory suitable for all hand torches, PCH-10 through PCH-102 and the 1Torch. This versatile, straight line cutter is for hand held systems and it cuts vertical, 90o, or bevel cuts. Its consistent standoff improves cut quality and maximises overall performance. Produces more efficient straight line cuts. Lightweight, minimum set up time and no power required. Magnetic mounts ensure placement and ease of use. Optional suction plates available for nonmagnetic applications (i.e. aluminum and stainless steel). The Cutting Guide Kit includes: 1.2m standard rail Torch Holder and Busing Heavy Duty Magnets (2 ea.) Slide Assembly Wheels and Fasteners. Optional 1.2m extensions (9-7971) available.

- 45 -

CUTTING EQUIPMENT

TORCH CUTTING GUIDES (CONT.) ™

CUTMASTER TRUE Standoff Cutting Guides Cat. No. 9-8281 (CUTMASTER 12, 20, 25, 35 AND 40) List Price - £15.17 New standoff guides designed to fit the SL60 & SL100 torches specific to the ™ CUTMASTER TRUE Series systems. The standoff is preset.

MISCELLANEOUS TORCH ACCESSORIES

Leather Leads 4.6m (15 ft.) 6.1m (20 ft.) 7.6m (25 ft.) 15.2m (50 ft.)

Cover 9-1258 9-1260 9-1270 9-1280

List Price - £61.53 List Price - £72.25 List Price - £88.29 List Price - £144.48 TM

These leads covers are suitable for both 1Torch and SureLok® leads. Snaps make it easy to install. For wider torches, consider snapping two covers together width wise.

Trigger Guard Kits 1Torch (SL60 & SL100) Cat No. 9-8420 - Short Trigger Guard

List Price - £19.53

These guards offer additional protection from accidental activation or damage to the torch switch.

Remote Pendant Control Cat No. 7-3460 - 6.1m (20 ft.) List Price - £142.28 Remote Pendant Control for your Mechanised application.

Hand Pendant Extension Cat No. 7-7744 - 7.6m (25 ft.)

List Price - £118.86

™

ATC Lead Extensions 4.6m (15 ft.) 7-7544 List Price - £183.26 7.6m (25 ft.) 7-7545 List Price - £215.76 15.2m (50 ft.) 7-7552 List Price - £410.91 Available for any system using 1Torch with ATC Quick Disconnect. Leads Extensions enable you to customise your lead length to suit the cutting job up to 30.5m.

- 46 -

Long Trigger Guard shown

CUTTING EQUIPMENT

AIR FILTER/AIR FILTER KITS For improved consumable parts life and overall performance, Thermal Dynamics recommends Air Filter Kits be used on all plasma cutting systems.

Single Stage Air Filter Kit List Price - £84.09 Cat. No. 7-7507 (Filter Body 9-7740, Hose 9-7742, Filter Element 9-7741) For use with shop compressed air systems, this in-line filter will not allow moisture or water to pass through the filter element even if it becomes completely saturated. This hi-tech filter element actually blocks the absorption of water to increase performance and improve consumable parts life.

TORCH COOLANT (For all Thermadyne liquid-cooled systems) ™

Extra Cool Coolant (Standard Coolant) Cat. No. 7-3580 List Price - £20.75 Resists freezing down to +10oF (-12oC) ™

Ultra Cool Coolant Cat. No. 7-3581 Resists freezing down to -27oF (-33oC)

List Price - £26.09

™

Extreme Cool Coolant Cat. No. 7-3582 Resists freezing down to -65oF (-51oC)

List Price - £42.15

™

De-I Cool Coolant Cat. No. 7-3583 List Price - £10.98 De-ionised water mixture for use where freezing protection is not required.

PORTABLE GEAR Multi-Purpose Cart Cat. No. 7-8888 List Price - £181.00 Designed for most portable manual cutting systems such as the PakMaster or CUTMASTER, or any other similar sized systems. This rugged steel cart has easy rolling 203mm diameter wheels along with 76mm front mounted casters. This cart also serves as an excellent showroom display stand.

MISCELLANEOUS ACCESSORIES Welding Gloves Cat. No. 9-1250

List Price - £10.15

Plasma Cutting Techniques - DVD

- 47 -

ARC ACCESSORIES

Auto-Darkening Welding Helmet

Ordering Information Part no.

Description

List Price ÂŁ

WHF41001 WH41001ADF WH41001FL WH41001IL WH41001HB WH41001HG

Weldskill Helmet (Carbon Fibre) Auto Darkening Filter Cartridge Front Cover Lens Inside Cover Lens Front Headband Headgear Assembly

80.00 68.54 1.43 1.04 3.02 15.01

Features

Benefits

Auto-darkening Variable Shade Light-weight 4 sensors Easy Process Changeover Delay Time Switch Solar-Powered Backed by Tweco support

Automatically adjusts from light to dark and from dark to light Welding shade levels from 9-13, adjustable based on the arc strength For improved operator comfort To respond rapidly to the welding arc From welding to grinding Long/Medium/Short delay No need to worry about changing batteries Quality, reliability, and a 2-year warranty

- 48 -

ARC ACCESSORIES

Tweco WeldSkill Air-Cooled MIG Torches Part no.

Description

List Price £

WS180XE-10-3035 WeldSkill 180A MIG Gun, 10ft WS180XE-12-3035 WeldSkill 180A MIG Gun, 12ft

85.86 90.10

WS220XE-10-3035 WeldSkill 220A MIG Gun, 10ft WS220XE-12-3035 WeldSkill 220A MIG Gun, 12ft

94.34 100.70

Tweco TWE Air-Cooled MIG Torches Part no.

Description

List Price £

161.550.307 161.550.407

TWE2.3E Tweco 250A MIG Gun, 3m (10ft) TWE2.4E Tweco 250A MIG Gun, 4m (12ft)

116.28 127.61

161.560.307 161.560.407 161.560.457

TWE4.3E Tweco 400A MIG Gun, 3m (10ft) TWE4.4E Tweco 400A MIG Gun, 4m (12ft) TWE4.45E Tweco 400A MIG Gun, 4.5m (15ft)

153.15 161.66 168.74

Tweco Classic Air-Cooled MIG Torches Part no.

Description

List Price £

X210-4045 X212-4045 X215-4045

Tweco Classic No. 2, 200A MIG Gun, 3m (10ft) Tweco Classic No. 2, 200A MIG Gun, 4m (12ft) Tweco Classic No. 2, 200A MIG Gun, 4.5m (15ft)

175.83 185.75 195.70

X410-3545 X412-3545 X415-3545

Tweco Classic No. 4, 400A MIG Gun, 3m (10ft) Tweco Classic No. 4, 400A MIG Gun, 4m (12ft) Tweco Classic No. 4, 400A MIG Gun, 4.5m (15ft)

218.37 232.54 246.73

- 49 -

Part no.

Description

List Price £

WS21-50F WS21-37 WS21-62 WS11-23 WS11-30 11-40 WS11-45 WS51 WS42-3035-15

Nozzle, 13mm bore Nozzle, 9.5mm bore Nozzle, 16mm bore Contact Tip, 0.6mm Contact Tip, 0.8mm Contact Tip, 1.0mm Contact Tip, 1.2mm Gas Diffuser Conduit Liner, 0.8-0.9mm

13.35 8.75 8.75 0.61 0.61 0.62 0.61 3.32 14.49

Tweco TWE & Classic Consumables Nozzles - TWE2 and Classic No.2 Guns 22-50 1/2” / 13mm Bore 22-62 5/8” / 16mm Bore

3.02 3.02

Nozzles - TWE4 and Classic No.4 Guns 24A-50 1/2” / 13mm Bore (adjustable) 24A-62 5/8” / 16mm Bore (adjustable) 23-50 1/2” / 13mm Bore (self insulated, screw-on) 23-62 5/8” / 16mm Bore (self insulated, screw-on)

3.12 3.12 10.43 10.43

Contact Tips 14-30 14-40 14-45 14-52 14-116

0.8mm - Standard 1.0mm - Standard 1.2mm - Standard 1.3mm - Standard 1.6mm - Standard

0.68 0.68 0.68 0.68 0.68

Gas Diffusers 52 54A 52FN

Gas Diffuser (TWE2 and Classic No. 2 Guns) Gas Diffuser (TWE4 and Classic No. 4 Guns) Gas Diffuser (Fixed Type Nozzles)

4.89 3.14 5.54

Conduit Liners - TWE2 and Classic No.2 Guns 42-3035-15 15ft Steel Liner, 0.8mm wire 42-4045-15 15ft Steel Liner, 1.0mm / 1.2mm wire

14.63 14.63

Conduit Liners - TWE4 and Classic No.4 Guns 44-3545-15 15ft Steel Liner, 0.8mm / 1.2mm wire 44-116-15 15ft Steel Liner, 1.2mm / 1.6mm wire

15.01 15.01

- 50 -

ARC ACCESSORIES

Tweco WeldSkill Consumables

ARC ACCESSORIES

Air Carbon Arc Gouging K4000 Angle-Arc® Manual Gouging Torch FEATURES and BENEFITS o

Natural 15 Torch Angle o 360 Swivel Cable Positive Grip Handle Reduced Weight High Quality Cable Hose Rugged Construction

Greater operator comfort Less cable twist / Less strain on operator Greater operator feel and ease in positioning the torch Optimum cable and torch weight to minimise fatigue Best quality cable hose offers high heat and abrasion resistance Overall rugged construction for the harsh environment

K4000 EXTREME GOUGING TORCHES

Part no.

Description

List Price £

61-082-008 61-082-009

K4000 Extreme 1000A Gouging Torch with 7” Cable K4000 Extreme 1000A Gouging Torch with 10” Cable K4000 Torches are suitable for use with up to 13mm electrodes

229.14 255.37

TRI-ARC FOUNDRY GOUGING TORCH

62-991-424

Tri-Arc 2200A Gouging Torch with 7” Cable Tri Arc Torches are suitable for use with up to 19mm electrodes

443.06

Carbon Electrodes Professional all purpose gouging electrodes. Controlled copper coating improves conductivity providing more efficient, cooler operation and helps maintain electrode diameter at the point of the arc. DC/CC POINTED ELECTRODES Part No.

Description

Pieces Per Box

Price £ per Electrode..

22-983-003A 22-033-003A 22-043-003A 22-053-003A 22-063-003A 22-082-003A

(4 x 305mm) 5/32 x 12 DC/CC Pointed (5 x 305mm) 3/16 x 12 DC/CC Pointed (6.5 x 305mm) 1/4 x 12 DC/CC Pointed (8 x 305mm) 5/16 x 12 DC/CC Pointed (9.5 x 305mm) 3/8 x 12 DC/CC Pointed (13 x 355mm) 1/2 x 14 DC/CC Pointed

50 50 50 50 50 50

0.24 0.25 0.26 0.33 0.43 0.76

100 100 100 100 100

0.62 0.97 1.23 1.82 2.29

DC/CC JOINTED ELECTRODES 24-052-003 24-064-003 24-084-003 24-104-003 24-124-003

(8 x 355mm) 5/16 x 14 DC/CC Jointed (9.5 x 430mm) 3/8 x 17 DC/CC Jointed (13 x 430mm) 1/2 x 17 DC/CC Jointed (16 x 430mm) 5/8 x 17 DC/CC Jointed (19 x 430mm) 3/4 x 17 DC/CC Jointed - 51 -

SLICE® CUTTING SYSTEM SLICE® Battery Pack

The SLICE Battery Pack comes in a rugged tool box. As with the Utility Pack, you get all the basic items needed to do a cutting job such as torch, striker and rods. Also included in the Battery Pack is a 12-Volt rechargeable SLICE battery Box Assembly.

SLICE® Exothermic Cutting Rods SLICE exothermic cutting rods are designed specifically for use with SLICE cutting systems.

SLICE BATTERY PACK Part No. 63-991-007CE

Description SLICE Battery Pack (220V) Setup for 1/4” Slice Rods SLICE TORCHES AND ACCESSORIES

List Price £ 1088.15

Part No.

Description

List Price £

03-003-000 03-003-001CE 03-003-006CE 94-168-024 94-158-045

SLICE Torch Assembly (0.3m/1ft Cable) SLICE Torch Assembly (1.8m/6ft Cable) SLICE Torch Assembly (3m/10ft Cable) 3/8” Collet Nut for 3/8” Rods 3/8” Collet Chuck for 3/8” Rods

400.99 400.99 400.99 47.26 30.03

SLICE CUTTING RODS Part No. 42-049-002 42-049-003 42-049-005 43-049-002 43-049-003 43-049-005 43-049-007 43-049-009

All SLICE Cutting Rods should be ordered per box. Description Pieces Per Box 25 Coated SLICE Rod (7 x 559mm) (1/4 x 22) 100 Coated SLICE Rod (7 x 559mm) (1/4 x 22) 50 Coated SLICE Rod (10 x 457mm) (3/8 x 18) 25 Bare SLICE Rod (7 x 559mm) (1/4 x 22) 100 Bare SLICE Rod (7 x 559mm) (1/4 x 22) 25 Bare SLICE Rod (7 x 1118mm) (1/4 x 44) 50 Bare SLICE Rod (10 x 457mm) (3/8 x 18) 25 Bare SLICE Rod (10 x 914mm) (3/8 x 36) - 52 -

Price £ Per Box 46.58 163.62 132.37 44.00 152.89 78.44 109.69 90.09

ARC ACCESSORIES

SLICE® Cutting Systems

Do Thermadyne Inverters work on Generators? One of the main fears when selling any inverter is its reliability when used with a generator. Some inverters are very susceptible to input voltage fluctuations. Thermal Arc and Thermal Dynamics inverter-based systems have in built protection to guard against any such fluctuations and minimise damage due to under or over voltage conditions. What Size of Generator do I Need? The KVA rating of the machine is the main factor to consider. However, it is important to remember that the input voltage can be affected by load changes during arc striking particularly when using rods which require a high open circuit voltage in order to initiate the arc. With the above in mind, listed opposite are the input current ratings and equivalent KVA rating for Thermadyne machines and the recommended generator size for running these systems up to their maximum duty cycle. If you wish to run these machines on extension leads you must ensure that you use the correct rated cables and mains plugs. As a guiding principle the kVA rating of a generator should be 1/3 higher than the rated load it is to supply.

- 53 -

Reccommended Generator Sizes

Part No

Power Source

Input Voltage

W1003605 W1002903 W1003003 W1003803 10-9326 10-9401 10-3091 10-3099 10-9402 10-3098 10-9403 W1003186 707079 706114 706124/25 10-9405 10-9406 10-9330 10-9407 10-9408 10-3089 W1000103PP W1000303PP W1000203PP W1000503PP 1-3835-4 1-1604-4 1-4200-4 1-4630-4 1-5130-4 1-1130-4 1-1330-4 1-1730-4 1-1930-4

161S 175SE 175TE 201TS 250TE 300WTE 400TS 200AC/DC 220AC/DC 300AC/DC 350AC/DC Fab181i Fab200 Fab250 Fab330 Fab400II Fab450II 220GMS 300GMS 400GMS 400MST Powermaster 320SP P’master 400SP (AC) P’master 400SP (WC) Powermaster 500SP Drag-gun Plus CutSkill 35A Cutmaster 12 PLUS Cutmaster 10 Cutmaster 12 Cutmaster 20 Cutmaster 25 Cutmaster 35 Cutmaster 40

115V/230V 230V 230V 115V/230V 415V 415V 415V 230V 230V 400V 400V 230V 240V 240V 415V 400V 400V 230V 400V 400V 415V 400V 400V 400V 400V 230V 230V 115V/230V 230V 400V 400V 400V 400V 400V

Max input current draw @ max current output of machine 35.5A/23.2A 40A 40A 39A / 32A 15A 13A 30A 38A 33A 20A 27A 20A 36.7A 48A 20A 24.2A 43.4A 20A 13A 38A 30A 21A 27A 27A 36A 30A 27A 28.5A/21.4A 14A 8A 16A 17A 27A 32A

Max rated kVA input

Recommended Generator Size

4/5.5 kVA 10 kVA 10 kVA 5/8 kVA 10.8 kVA 9.1 kVA 21.5 kVA 8.7 kVA 7.5 kVA 14.4 kVA 19 kVA 5 kVA 9 kVA 11.5 kVA 14.5 kVA 16.7 kVA 28.5 kVA 7.5 kVA 9.2 kVA 26 kVA 21.5 kVA 20 kVA 25 kVA 25 kVA 30 kVA 8.3 kVA 7 kVA 5.6/8.5 kVA 3.4 KVA 5.3 KVA 11 KVA 11.8 KVA 18.7 KVA 23.6 KVA

5.5/7.5 kVA 14 kVA 14 kVA 7/11 kVA 15 kVA 13 kVA 29 kVA 12 kVA 11 kVA 20 kVA 26 kVA 7 kVA 12 kVA 16 kVA 20 kVA 22 kVA 37 kVA 10 kVA 13 kVA 35 kVA 29 kVA 27 kVA 34 kVA 34 kVA 40 kVA 12 kVA 10 kVA 7.5/11.5 kVA 5.5 KVA 8 KVA 16 KVA 17 KVA 24 KVA 31 KVA

Slow blow fuses or Motor rated circuit breakers are recommended for the above machines. Recommended Generators KVA ratings MUST be adhered to minimise the welding power source’s possible failure as a result of inadequate mains power at the equipment's MAXIMUM input current draw at and MAXIMUM rated output at MAXIMUM duty cycle. Calculating kVA (Kilovolt-Amperes) ratings. 1.

Single Phase Kilovolt-Amperes (kVA) = Volts x Amperes 1000 2. Three Phase Kilovolt-Amperes (kVA) = Volts x Amperes x 1.73 1000 Information prepared by Thermadyne Technical Services. +44 1257 224852 - 54 -

Warranty Thermadyne guarantees the proposed product to be free from defects in material or workmanship when operated in accordance with the written instructions as defined in the ownerâ&#x20AC;&#x2122;s manual supplied with the machine. Thermadyne welding products are manufactured for use by commercial and industrial users and trained personnel with experience in the use and maintenance of electrical welding and cutting equipment. Thermadyne warranty will not apply to: a) Equipment that has been modified by any other party other than Thermadyneâ&#x20AC;&#x2122;s own service personnel or with prior written consent obtained from Thermadyne Technical department (UK). b) Equipment that has been used beyond the specifications established in the owners manual. c) Installation not in accordance with the installation/service manual. d) Failure to clean and maintain the machine as set forth in the owner, installation or service manual. If warranty is being sought, please contact Thermadyne's UK Technical department for a warranty authorisation returns form.

Welding Equipment - Limited Warranty Period Product 400TS, 400 MST, 200AC/DC, 300AC/DC, TIG/HF400A PowerMaster Plus 320SP, 400SP, 500SP, Fabricator 200, 220AC/DC, 250AC/DC, 350 AC/DC, Fabricator 181i, Fabricator 250, Fabricator 330, Fabricator 400II, Fabricator 450II, 220GMS, 300GMS, 400GMS, 175SE, 175TE, 161S, 201TS Options and Accessories Repair and Replacement Parts Torch Consumables

Period

3 Years

2 Years 6 Months 3 Months None

Cutting Equipment - Limited Warranty Period Product CutMaster Series Drag-Gun Plus, Pak 200, CutSkill 35 1Torch , SureLok Torches and PCH 120 Other Torches Repair Parts Torch Consumables TM

Period 3 Years 2 Years 1 Year 6 Months 3 Months None

- 55 -

Terms and Conditions Effective Date:

These current list prices supersede all other price lists. All deliveries will be priced as this list.

Currencies:

All prices are quoted in Pounds Sterling.

Discounts:

All prices quoted are list prices to which standard distributor discount will be applied.

Delivery Terms:

UK Deliveries - Prices are Freight Paid to UK mainland destination. Export Deliveries - Prices are Ex Works, Chorley, UK.

Order Value:

All orders are subject to our minimum order value of £150.

Product Details:

We have a full range of technical literature available on request.

Product Discount Categories INDUSTRIAL PRODUCTS WELDING AND CUTTING EQUIPMENT

TORCHES AND TORCH PARTS

I1 I2 I5 H1 D1 F6 F7

F1 F2 F4 E1 G2 G3 G6 G7 H2 R1 R2 R3 R4 R5 R6

Welding Equipment, Options and Accessories PowerMaster Range of Welding Equipment and Accessories PowerMaster - Robotic Synergic MIG TDC Manual Plasma Cutting Systems, Options and Accessories CutSkill Plasma Cutting Systems Tweco Watercooler and Repair Parts GAR Cooler and Repair Parts

REPAIR PARTS I4/H4 All Manual Plasma Cutting and Welding Repair Parts

SAFETY ACCESSORIES F8

Helmets

AUTOMATION

GAS EQUIPMENT

PLASMA CUTTING J1 J2 J3 J4 J5 J6 J7 J8

Thermal Dynamics Automation Systems and Components Thermal Dynamics Automation Consumable Parts Automation Repair Parts ULTRACUT/AUTOCUT Systems and Components XT-300/301 Torches Style 2 (22- & 36-) XT-300/301 Consumables Style 2 (22- & 36-) XT-300/301 Torches Style 1 (21- & 35-) XT-300/301 Consumables Style 1 (21- & 35-)

PLASMA WELDING I6 I7

Tweco MIG Guns Tweco MIG Consumables and Parts Tweco MMA Accessories “WS” WeldSkill Consumable Parts Arcair Systems, torches, Accessories and Parts Arcair Slice and Underwater Electrodes Arcair Gouging Electrodes Arcair branded Chemicals Manual Plasma Torches, Parts and Accessories OCIM TIG Torches OCIM TIG Consumables and Torch Parts Ocim MIG Digital Torches and Consumables Flex Neck Torches and Pars Ocim MIG TWE Torches Ocim MIG Torches, consumables and Torch Parts

Plasma Welding Systems + Accessories Plasma Welding Torches, Leads and Consumables

A1 A2 C1 C2 B1

Victor Kits, Regulators, Torches,Repair Parts Victor branded Tips and Nozzles CutSkill Gas Torches and Regulators CutSkill Tips and Nozzles TurboTorch branded products

Prices are subject to change and amendment without notice and to our normal terms and conditions of sale

ARC ACCESSORIES K1

Automation/Robotics MIG/TIG Torches, Parts, Accessories

For further details, please contact the Customer Service Team Telephone (44) 01257 224824 / Fax (44) 01257 224800 - 56 -

How to Contact Us THERMADYNE INDUSTRIES LIMITED THERMADYNE SRL Chorley North Industrial Park Via Bolsena, 7 Chorley, Lancashire PR6 7BX 20098 San Giuliano Milanese (MI) United Kingdom Italy Contact Numbers Contact Numbers Tel: +44 1257 224824 Tel: +39 02 36546801 Fax: +44 1257 224800 Fax: +39 02 36546840 Website: www.thermadyne.com Senior VP Sales General Manager Europe/ROW F Monechi

Mobile:

+39 348 4481304

fmonechi@thermadyne.com

UK/Eire/ROW Nordic/Central Eastern Europe Northern Europe Southern Europe Russian Regions Western Europe/North Africa

+44 7774405075 +31 235614182 +32 496634233 +39 0236546801 +7 8129862876 +34 608 121525

swaring@thermadyne.com mwennardt@thermadyne.com jvanheeswyck@thermadyne.com ecostamagna@thermadyne.com kdemidov@thermadyne.com pdallâ&#x20AC;&#x2122;oglio@thermadyne.com

UK - South UK - North

+44 7789685011 +44 7720350810

csimpson@thermadyne.com athackeray@thermadyne.com

+39 348 4481 302 +49 175 1777722 +44 7860 256787

gagazzi@thermadyne.com parntz@thermadyne.com smilner@thermadyne.com

+44 1257 224 811 +44 1257 224 838

darcher@thermadyne.com smallion@thermadyne.com

+44 7725 791444 +44 7983 435370 +39 0236546801 +31 615 838219

jjarvis@thermadyne.com mmeredith@thermadyne.com acadenabbio@thermadyne.com ezelis@thermadyne.com

+44 1257 224 819

tattwood@thermadyne.com

+44 1257 224 834 +44 1257 224 825 +44 1257 224 821

igraham@thermadyne.com jsmith@thermadyne.com kharrison@thermadyne.com

+39 0236546801

rsimonetti@thermadyne.com

+39 0236546801 +39 0236546801 +39 0236546801

gfettolini@thermadyne.com rnatale@thermadyne.com mmoreno@thermadyne.com

+44 1257 224 852 +44 1257 224 851 +44 1257 224 850 +39 0236546801

awarren@thermadyne.com broberts@thermadyne.com dktaylor@thermadyne.com sbarizza@thermadyne.com

Sales Regional Sales Managers Steve Waring Magnus Wennardt Johnny Vanheeswyck Elio Costamagna Konstantin Demidov Paolo Dall'Oglio Area Sales Managers

Clive Simpson Andy Thackeray

Automation - Regional Sales Managers Giovanni Agazzi Peter Arntz Steve Milner

Southern Europe Northern Europe UK/ROW

Sales & Marketing Administration Denise Archer Sean Mallion

Sales + Marketing Admin Manager Marketing Coordinator

Application Support Specialist Jeff Jarvis (Welding) Mike Meredith (Welding) Alessandro Cadenabbio (Automation - S Europe) Erwin Zelis (Automation - N Europe)

Customer Service - UK Teruka Attwood

Team Leader

Customer Service Representatives

Inge Graham Jane Smith Kerri Harrison

Customer Service - Italy Roberto Simonetti

Team Leader

Customer Service Representatives

Grazia Fettolini Ramona Natale Maria Moreno

Technical Service Andy Warren Bernard Roberts David Taylor Stefano Barizza

European Service Manager Repair Technician Technical Administrator Service Technician - Italy - 57 -

NOTES

Arc Welding Power Supplies Inverters Wire Feeders

Plasma Cutting Systems Torches Accessories

Arc Welding Products MIG Manual Products Robotics Arc Gouging Arc Accessories Arc Gouging Manual Products Electrodes

Gas Apparatus Outfits Regulators Torches & Tips Gas Manifolds

Hardfacing Welding Wires Electrodes

For information on the brands not included in this guide please contact us for details

WORLD HEADQUARTERS: Suite 300, 16052 Swingley Ridge Road Chesterfield, MO 63017, USA Tel: +636-728-3000 Fax: + 636-728-3021 www.thermadyne.com