PARTS LIST & ASSEMBLY INSTRUCTIONS FRAMELESS WALL EASY REACH (Part No. WER24**)
Tools Required:
Cordless Drill
Level
Rubber Mallet
Wood Glue
A
B
D
E
F
C
C
G
H
I
J
K
L A B C D E F G H I
PLAI_FL_WER24
M
Wall Side Panel Right Wall Side Panel Left Shelf Left Side Panel Right Side Panel Top Panel Bottom Panel Door 1 Door 2 (hinge side)
N x1 x1 x2 x1 x1 x1 x1 x1 x1
J K L M N O P Q
O
P
Back Panel 1 7/8” Screw 1 1/2” Dowel Metal Shelf Pin 5/8” Screw 3/4” Screw Bi-fold Door Hinge Door Hinge
x1 x26 x20 x12 x12 x8 x2 x2
Q
Page 2 of 5
STEP 1
1. Remove all pieces from box.
2. Place Bottom Panel (G) on nonabrasive clean, flat surface.
G L
3. Place a drop of wood glue into predrilled dowel holes and insert Dowels (L). 4. Gently tap dowels into place with rubber mallet.
STEP 2
L B
K G
1.
Place a drop of wood glue into predrilled dowel holes and insert Dowels (L).
2.
Gently tap dowels into place with rubber mallet.
3.
Attach Wall Side Panel Left (B) using (3) 1 7/8� Screws (K)
STEP 3
1. Insert Back Panel (J) into routed slots of panels B and G.
B
J
G
STEP 4 B
J
L
A K
1.
Place a drop of wood glue into predrilled holes on Wall Side Panel Right (A) and insert Dowels (L).
2.
Attach Wall Side Panel Right (A) using (3) 1 7/8� screws (K).
G
PLAI_FL_WER24
Page 3 of 5
STEP 5
K
1.
Insert Dowels (L) into predrilled dowel holes in Top Panel (F) as in Step 1.
2.
Attach Top Panel (F) to Wall Side Panel Left (B) while positioning Back Panel (J) into routed slot.
3.
4.
F
B
Attach Top Panel (F) to Wall Side Panel Right (A). Take care when manuvering into position to ensure Back Panel (J) is inserted into routed slot on Wall Side Panel Right (A).
J
A
G
Using (6) 1 7/8” Screws (K) secure top panel.
STEP 6
K D
1.
Attach Left Side Panel (D).
2.
Using (7) 1 7/8” Screws, secure Left Side Panel (D).
*
*(Ensure bamboo edge banding is toward front of cabinet)
STEP 7
K D
E *
PLAI_FL_WER24
1.
Attach Left Side Panel (D) and Right Side Panel (E).
2.
Using (7) 1 7/8” Screws, secure Left Side Panel (D).
*(Ensure bamboo edge banding is toward front of cabinet)
Page 4 of 5
STEP 8 1.
Insert Metal Shelf Pins (M) six per side.
2.
Place Shelves (C) at desired height.
C C
M
STEP 9
Q I
1.
Place Door 1 (H) and Door 2 (I) on clean flat surface.
2.
Insert Door Hinges (Q) into routed holes and secure with 5/8” Screws (N).
3.
Open Bi-fold Door Hinge (P) and place into routed holes on Door 1 (H), secure with 3/4” Screws (O). Repeat for Door 2 (I).
P
H
P
STEP 10
D
PLAI_FL_WER24**
E
1.
Attach Door Assembly to cabinet. Using (4) 5/8” Screws (N), line up hinge holes with predrilled holes on Side Panel (D or E).
2.
Use phillips head screwdriver to adjust hinges for proper door alignment.
Page 5 of 5