Gedore Range by Drakewoods Group

ASHBURTON

(03) 308 3147

NORTH SHORE

(09) 414 7214

DARGAVILLE

(09) 439 7335

OAMARU

(03) 434 6956

FRANKTON

(07) 847 4994

PALMERSTON NORTH

(06) 357 8888

GISBORNE

(06) 868 8214

PUKEKOHE

(09) 238 1800

GORE

(03) 208 4882

RANGIORA

(03) 313 3425

HASTINGS

(06) 870 4450

ROTORUA

(07) 347 9110

HAWERA

(06) 278 4185

TAKAKA

(03) 525 9847

INVERCARGILL

(03) 218 2059

TE AWAMUTU

(07) 871 7062

MORRINSVILLE

(07) 889 7681

TE RAPA

(07) 847 4994

MT MAUNGANUI

(07) 575 0504

TIMARU

(03) 684 7036

NAPIER

(06) 842 2304

TOKOROA

(07) 886 1700

NELSON

(03) 547 8000

WANGANUI

(06) 344 4804

NEW PLYMOUTH

(06) 758 5133

WESTPORT

(03) 789 7033

20 20

TradeZone NZ Locations

TOTALRANGE

NORTH SHORE PUKEKOHE FRANKTON MORRINSVILLE MT MAUNGANUI TE RAPA

TOTALRANGE

TOKOROA

TAKAKA

RANGIORA

OAMARU

2020

ASHBURTON

MISSION STATEMENT Gedore strives to be the leading supplier of superior quality tools in Africa and other designated markets. We seek to build and maintain lasting relationships with customers by responsively offering suitable products at fair prices, which consistently conform to the highest level of product and service quality standards.

DISCLAIMER As we are constantly improving our products, we reserve the right to make changes as the need arises. The actual products delivered may therefore vary from those depicted in the catalogue. We do not provide any warranties in connection with technical and safety information provided in this catalogue. All customers are therefore advised to refer directly to their manufacturer’s specifications and the advice and standards of the relevant professional/trade associations. All products remain the property of Gedore Tools SA (Pty) Ltd until paid for in full. We cannot accept any liability for printing errors. Reproduction of any part of this catalogue requires the prior written permission of Gedore Tools SA (Pty) Ltd. All rights reserved worldwide.

“Our guarantee covers all tools against breakage under normal working conditions and is subject to fair wear and tear.”

We strive to increase the value for all stakeholders and to be a preferred supplier, employer and customer.

VALUE SYSTEM Quality We strive to be the best that we can be in everything that we do. Innovation and Knowledge We strive for continuous improvement in all aspects of our business through learning, benchmarking and having a general uneasiness with the status quo. Responsiveness We have a bias for action by feeling a sense of urgency in everything that we do, and encourage employees to be proactive.

GEDORE TOOLS SA

TORQUE WRENCH WARRANTY &

WARRANTY POLICY

CALIBRATION POLICY

At GEDORE we take pride in the quality of our products and services and we review all warranty claims with the aim of using the information gained for further product improvement. Every GEDORE tool is covered by a lifetime guarantee against defective material and workmanship. Provided that the tool has been used correctly for its intended purpose and allowances have been made for wear and tear, this guarantee will allow for the repair or exchange of the tool. While some deterioration through extensive use might be unavoidable, we will adopt a generous approach when viewing warranty claims. We do, however, set warranty limitations on wear and tear, obvious misuse, missing parts and purposely altered tools to protect ourselves against unreasonable claims. Should the product fall outside the parameters of the warranty criteria, we will advise the customer on the repair or replacement cost of the article.

Motivation and People Centred We acknowledge that our employees are the key to our success. © Copyright by Gedore Tools SA (Pty) Ltd.

Customer Focused We expect all employees to maintain a customer focus in all aspects of their work. Care for the Environment We are sensitive of the need to care for the environment and apply our business processes accordingly. Corporate Governance We enforce good corporate governance by encouraging honesty, transparency, trust, equity and social responsibility.

The warranty does not cover torque wrenches which have been misused or which have experienced wear and tear through extensive use. A warranty return will be assessed by our technical staff and if the return falls outside of our warranty policy, the customer will be notified and quoted for the repair. Calibration A standard calibration and the issue of a test certificate will be provided as standard practice on any repair conducted. A SANAS calibration and the issue of a SANAS calibration certificate will be done on request at a nominal charge.

Team Work and Mutual Respect We encourage and support team participation, effective communication and mutual respect.

We motivate employees by providing opportunities for advancement, sharing information, fair treatment, training, job security and workplace safety.

Warranty In terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee against defective materials and workmanship. Provided that the tool has been correctly used for its intended purpose and allowances have been made for the wear and tear of moving parts, the torque wrench will be repaired free of charge.

Obsolescence Please note that while GEDORE uses its best endeavours to carry significant stocks of spares to support its torque wrench product range, some spares for older discontinued items are no longer available. In such cases, repair of the torque wrench may not be possible.

GEDORE – high-quality hand tools with a lifetime guarantee GEDORE Werkzeugfabrik, is a family-owned manufacturer of superior quality hand tools and related industrial products. Headquartered in Germany, with manufacturing operations in Germany, Austria, UK, South Africa and Brazil, GEDORE has a global footprint, distributing their products to more than 70 countries worldwide.

GEDORE operations are ISO-accredited, and all products are manufactured to exceed international operating standards. Every GEDORE hand tool boasts a lifetime guarantee, offering consumers “Tools for Life”.

With a wide selection of drop-forged, precisioncrafted hand tools to choose from, GEDORE provides Under the motto of “Inspired by tradition - forging high-quality tools to a range of industries, artisans the future”, GEDORE is celebrating its 100-year and professionals. anniversary this year. Traditional forging methods coupled with 21st century robotic and automated operations ensure that GEDORE’s tools meet the core objectives of accuracy, quality, versatility and customer satisfaction.

NEW

147 3550-UK-LS3 TORQUE WRENCH

PRODUCTS

15 62P ADJUSTABLE WRENCH

84 S8000 CIRCLIP PLIERS SETS

32 D19 NZU-10T SOCKET SET

65 DT 2142 ALLEN KEY SET

TORQUE TOOLS

UNCOMPROMISING AMBITION

INDEX

Controlled screw tightening - reliable and safe for more than 50 years

142

133 650C CLUB HAMMERS

SPANNERS

4-17

SOCKETS & ACCESSORIES

18-49

IMPACT SOCKETS & ACCESSORIES

50-59

SCREWDRIVERS

60-71

PLIERS

72-89

AUTOMOTIVE & SPECIAL TOOLS

90-101

SHEETMETAL & TOOL ASSORTMENTS 102-127

STRIKING TOOLS

128-133

VDE INSULATED SAFETY TOOLS

134-141

TORQUE TOOLS

142-177

PULLERS

178-187

NON-SPARKING TOOLS

188-193

APPRENTICE TOOLKITS

194-203

ARTISAN TOOLKITS

204-211

MERCHANDISERS

212-215

S8393 PLIERS SET

SPANNERS 4 - 17

SPANNERS, SETS ADJUSTABLE WRENCHES

COMBINATION SPANNERS 6

RATCHET SPANNERS 9

RING SPANNERS 10

FLARE NUT SPANNERS 13

OPEN ENDED SPANNERS 14

ADJUSTABLE WRENCHES 15

SLOGGING SPANNERS 16

HOOK SPANNERS 17

CROWFOOT SPANNERS 17

SPANNERS

Combination Spanners

NO. 1 B – THE STRONG ALL-ROUNDER › According to DIN 3113 Form B, ISO 3318, ISO 7738. › Sizes 5 and 5.5mm with hexagon ring, from size 6mm upwards with UD profile. › GEDORE vanadium steel 31CrV3, chrome-plated. › Carefully forged and professionally machined. › Overloading indicated by deformation. › The offset ring ensures a better grip on deep-seated or inset nuts or bolts. › Top-grade industrial quality for the hardest of continuous use.

Ring: 10° off set from shaft, with UD profile for gentle transmission of force

Non-glare look due to matt chrome plating

Jaw: ground precisely to exact nominal size for optimum contact areas

UD PROFILE protects bolt heads Slim ribbed open end for added strength guarantees maximum torques

The wave form of the ring profile allows the spanner to hold in all situations, even where the bolt dimensions are outside the tolerance range.

The contact surface area between the spanner and the bolt head is markedly increased due to the wave form. This allows a more even distribution of the contact pressure, which in turn allows the application of a higher torque.

Torque is transmitted to the flanks of the bolt head. This means that the edges cannot be deformed and the bolt is effectively protected.

4 3

As the torque is transmitted to the flanks of the bolt, even damaged bolt heads may be gripped and turned.

1 B (MM) COMBINATION SPANNERS Code 6000240 6000320 600040 600059 600067 600075 600083 600091 600105 600113 600121 600148 600156 600164 600172 600180 600199 600202 600210 600229 600237

! 5 5,5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

y 100 100 100 112 125 138 148 158 168 185 198 210 220 232 245 258 270 280 292 305 318

Code 15 15 14 21 25 33 44 50 60 77 88 103 120 140 160 190 220 250 300 335 370

600245 600253 600261 600288 600296 600318 600326 002540 600415 600342 600350 002527 002528 002529 002530 6004070 6004660 6004740 6004820 6004900

! 25 26 27 28 29 30 32 33 34 36 38 -11/2” 41 46 50 55 60 65 70 75 80

y 328 340 352 370 370 390 412 412 412 460 460 520 560 590 620 660 710 760 810 860

410 450 500 560 570 645 780 1000 840 1160 1450 1485 1900 2350 3600 3600 4500 5600 6545 8800

1 B (AF) COMBINATION SPANNERS

inch *WHILE STOCKS LAST Code 600512 600520 600539 600547 600555 600563 600571 600598 600601 600628 600636 600644 600652 600660

" 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1.” 1.1/16”

y 100 125 148 158 185 198 220 245 258 280 292 318 340 352

Code 14 25 45 50 80 97 120 174 185 250 300 370 450 500

600679 600881 600687 600695 600709 600717 600725 6007330 6007410 6007760 6007840 6007920 6008060 6008140 6008220 6008300

" 1.1/8” 1.3/16” 1.1/4” 1.5/16” 1.3/8” 1.7/16” 1.1/2” 1. 5/8” 1.3/4” 1.7/8” 2” * 2.1/16” * 2.3/16” 2.1/4” 2.3/8” * 2.7/16” *

601152 601160 601187 601200 601217 601268 601268TR 601438 601292 601276 601276TR 601179 601209

! " 1B-04M 1B-06M 1B-08M 1B-10M 1B-12M 1B-17M 1B-17M WITH TOOL ROLL 1B-18M 1B-TOP 20M 20 MOST POPULAR SIZES 1B-26M 1B-26M WITH TOOL ROLL 1B-13A 1B-017A

SLOGGING SPANNERS

Contents 10 13 17 19 10 11 13 14 17 19 10 12 13 14 17 19 22 24 10 11 12 13 14 15 16 17 18 19 10 11 12 13 14 17 19 22 24 27 30 32 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1.” 1/4” 5/16” 3/8” 7/16” 1/2” 9/16” 5/8” 11/16” 3/4” 13/16” 7/8” 15/16” 1.” 1.1/16” 1.1/8” 1.3/16” 1.1/4”

570 570 780 790 1150 1160 1170 1500 1900 1900 2400 3200 3600 4000 4400 4800

1 B (MM) / 1 B (AF) COMBINATION SPANNER SETS

Code

y 370 370 412 412 460 460 460 520 550 550 580 580 620 620 660 660

1425/41/1B FOAM ASSORTMENTS

0 0.500 0.670 1.380 2.100 3.260 1.910 2.270 2.390 3.373 6.740 6.740 2.285 4.765

1 22

SPANNERS

NO. 7 – SLIM LINE › According to DIN 3113 Form A, ISO 3318, ISO 7738. › Gedore vanadium steel 31CrV3, chrome-plated. › Carefully forged and professionally machined. › Slim jaw and jaw walls make this spanner lighter overall. › Overloading indicated by deformation. › Secure grip. › Non-glare look thanks to matt chrome-plating. › Designed for universal use.

Jaw: ground precisely to exact nominal size for optimum contact areas

Ring: 15° off set from shaft, with UD profile for gentle transmission of force

Non-glare look due to matt chrome plating

7 (MM) COMBINATION SPANNERS with same size each end

Code 608955 608963 608971 608998 609005 609013 609021 609048 609056 609064 609161 609072 609188

! 6 7 8 9 10 11 12 13 14 15 16 17 18

y 100 110 120 130 140 150 160 170 180 190 200 210 220

Code 12 15 20 32 34 45 50 65 73 90 120 105 165

609080 609196 609218 609099 609226 609102 609234 609242 609110 609250 609269 609129 609137

! 19 20 21 22 23 24 25 26 27 28 29 30 32

7 (MM) COMBINATION SPANNER SETS

Code 609358 609579 609374

! 7-17M 7-21 M 7-26 M

Contents 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32

y 230 240 250 260 270 280 290 300 310 320 330 340 380

150 220 250 215 335 295 410 450 400 440 500 544 624

0 1.65 3.70 5.11

Combination Ratchet Spanners

THE REVOLUTION Hollow profile comfortable to hold

› With same size each end. › UD profile. › High torque transfer. › Gedore vanadium steel 31CrV3. › Non-glare look thanks to matt chrome-plating › Locking insert and pawl manganese-phosphated. › Hot forged. › Jaw: ground precisely to exact nominal size for optimum contact areas.

Warp-resistant geometry with double T-girder effect

For ratchet loosening and fast tightening

Non-glare look due to matt chrome plating

7R COMBINATION RATCHET SPANNERS Code 2297051 2297078 2297086 2297094 2297108 2297116 2297124 2297132 2297140 2297159

! 8 9 10 11 12 13 14 15 16 17

7 7 7 7 7 7 7 7 6 6

y 140 150 160 164 170 180 190 200 212 225

7 R-005 COMBINATION RATCHET SPANNER SET

Code 32 42 54 63 69 88 101 125 137 160

2297167 2297175 2219433 2297191 2297205 2297213 2297221 2297248 2219549 2219557

! 18 19 21 22 24 27 30 32 34 36

12 pieces

› Most popular sizes combined in a set. › Flat pattern. › UD profile. › High torque transfer. › In plastic case. › Dimensions: 275 x 150 x 42mm.

› Most popular sizes combined in a set. › Flat pattern. › UD profile. › High torque transfer. › In robust sheet-metal case. › Dimensions: 320 x 210 x 55mm.

2297434

Contents 7R 8 10 13 17 19

0 0.930

y 237 250 274 292 325 359 399 424 449 480

7 R-012 COMBINATION RATCHET SPANNER SET

5 pieces

Code

6 6 6 6 6 6 5 5 5 5

Code 2297442

Contents 7R 8 9 10 11 12 13 14 15 16 17 18 19

197 202 262 319 520 590 780 920 1010 1208

0 2.840

SPANNERS

Double Ended Ring Spanners

Swivel Head Wrenches

534 COMBINATION SWIVEL HEAD WRENCHES

NO. 2 – RING SPANNER › Rings: thin walled with deep offset. › Chrome VANADIUM steel 31CrV3. › Carefully forged and professionally machined. › Ring: thin-walled, 5° deep offset from shaft, with UD profile for gentle transmission of force. › High bending strength does not fracture or splinter when overloaded, thus minimising the risk of injury.

› Slim pattern, with free moving socket wrench. › With hole for tommy bars 26 D and 26 RS (please order separately). › Gedore vanadium steel 31CrV3, heads polished, chrome-plated.

› In accordance with SANS 1112 and DIN 838.

3 2 DOUBLE ENDED RING SPANNERS Code 651206 651214 651222 651230 651249 651257 651265 651273 651516 651281

! 10 11 12 13 14 15 16 17 18 19

y 177 189 198 208 218 231 244 255 269 283

534 COMBINATION SWIVEL HEAD WRENCH SETS

0 0.055 0.065 0.075 0.095 0.110 0.120 0.140 0.170 0.220 0.240

Code 601535 601551 601594 601659 601691 601721 601748 601756 601780 601799 601802 601837 601853 601861 601918 601926 601934 601942 003518 003519 003520 003521

! 6x7 8X9 10x11 12x13 14x15 16x17 17x19 18x19 20x22 19x24 21x23 24x26 24x30 25x28 27x32 30x32 30x36 32x36 36x41 38x42 41x46 46x50

y 170 182 195 212 225 245 265 265 287 305 305 325 345 345 370 370 400 400 440 440 535 535

2 AF RING SPANNER

50 65 95 120 155 210 260 260 325 410 410 475 580 580 680 680 1000 1100 1150 1200 2250 2150

*WHILE STOCKS LAST Code 651389 651397

! 534-6M 534-9M

Contents 10 12 13 14 17 19 10 11 12 13 14 15 16 17 19

0 1.000 1.410

Code 003558 003561 003567 003568

" 13/16x7.8” 1.1/16x1.1/4” * 1.7/16x1.5/8” 1.13/16x2” *

y 285 370 440 540

0 0.360 0.700 1.300 2.200

3 304 / 304 (AF) 2 3 DOUBLE ENDED RING SPANNER HALF-MOON RING SPANNERS SETS › Sets of the most popular sizes. › Rings: thin walled with deep offset. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1112 and DIN 838.

› Chrome Vanadium steel 31CrV3. › Chrome plated, polished rings.

Code

! Contents 603058 2-8M 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 6x7 8x9 10x11 12x13 14x15 16x17 17x19 18x19 20x22 603112 2-11M 21x23 24x30 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 603090 2-12M 24x26 25x28 27x32

0 1.380 2.630 3.440

Code 006001 006006 6470120 006002 6470390 006003 006007 006005 006004 Code 006051 006052 006053

TX4 FLAT RING SPANNERS TORX®

! 11x13 13x15 13x17 14x16 14x17 15x17 16x18 19x21 19x22

y 152 185 185 185 185 186 185 233 233

0 0.075 0.135 0.135 0.120 0.135 0.120 0.170 0.230 0.230

" 7/16x1/2 9/16x5/8 3/4x7/8

y 150 185 230

0 0.075 0.135 0.275

304 HALF-MOON RING SPANNER SETS

straight pattern, for protruding TORX® head screws › Chrome Vanadium steel 31CrV3. › Chrome plated, polished rings. › For outside TORX®.

› Chrome Vanadium steel 31CrV3. › Chrome plated, polished rings.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA

Code 6059800 6059990 6060140 6060220

9 E6xE8 E10xE12 E14xE18 E20xE24

+ M5 - M7 M8 - M10 M12 - M14 M16 - M20

& 5,74 x 7,52 9,42 x 11,17 12,9 x 16,7 18,45 x 22,16

y 110 140 180 226

0 0.014 0.040 0.074 0.163

Code 634018

! Contents 6M 11x13 14x16 15x17 16x18 19x21 19x22

0 1.200

SPANNERS

Deep Ring Spanners

Friction Type Ratchet

2A 29 I SINGLE ENDED RING SPANNERS CONSTRUCTION RATCHETS offset › Heavy-duty pattern for highest torques. › Chrome Vanadium steel — 31CrV3. › Optional accessories: No. 2 AR extension tube for extending the

Reversible ratchet with two different size heads. Bi-hexagon and ‘rat-tail’ handle.

lever arm.

No. 2A + 2 AR

Code 6033840 6033920 6034060 6034140 6030150 6034220 6034300 6034490 6034570 6034650 6034730 6034810 6035030 6035110 6035380 6035460 6035540 6035620 6035700

! 24 27 30 32 34 36 41 46 50 55 60 65 70 75 80 85 90 95 100

y 180 190 200 235 235 245 265 280 290 300 345 355 365 375 385 385 410 410 412

0 0.350 0.400 0.450 0.550 0.650 0.650 0.750 1.050 1.150 1.400 2.100 2.300 2.600 3.000 3.450 3.800 4.870 4.560 4.500

Code 1648934 1382853 1648926 031320 031322 6262790 031325 031170 031328 031330

! 17x19 19x22 19x24 22x24 24x27 24x30 27x30 27x32 30x36 32x36

y 315 315 365 365 370 450 450 450 450 450

0 0.500 0.700 0.700 0.800 0.800 1.400 1.400 1.400 1.400 1.600

IMPACT SOCKETS

1“ SOCKET SET

2AR EXTENSION TUBES For heavy duty ring spanner 2A. Steel tube, chrome plated.

Code 6048600 6048790 6048870 6048950

No. 0 1 2 3

! 24-30 32-41 46-55 60-100

y 460 610 760 860

0 0.600 1.150 2.150 2.850

Flare Nut Spanners

NO. 400 3

› Chrome Vanadium steel 31CrV3. › Ring offset at 15 . Hexagon gap offset at 30 . › Chrome plated, polished open rings. › In accordance with DIN 3118. o

Ring 15° offset from shaft

Hexagon gap 30° offset, UD-section at 15° offset

400 (MM) / 400 (AF) FLARE NUT SPANNERS Code

! 8x10 9x11 10x11 10x12 11x13

y 140 145 150 150 160

0 0.045 0.050 0.055 0.110 0.075

Code " 005051 5/16x3/8 005053 7/16x1/2

y 140 160

0 0.045 0.075

005001 6056970 005002 6051070 005003

Code

! 12x14 14x17 17x19 22x24

y 170 195 210 250

0 0.100 0.135 0.160 0.320

" 005055 9/16x5/8 005056 5/8x3/4

y 195 210

0 0.135 0.160

005004 005005 005006 005007

inch

400 FLARE NUT SPANNER SETS

Code

› Chrome Vanadium steel 31CrV3. › Ring offset at 15 . Hexagon gap offset at 30 . › Chrome plated, polished open rings. › In accordance with DIN 3118. o

Code 634026

! 5M

Contents 8X10 11X13 12X14 17X19 22X24

0 1.200

SPANNERS

Open Ended Spanners

NO. 6 – STRONG AND ACCURATE › › › ›

In accordance with SANS 1112 and DIN 895. Chrome plated. Slim pattern. Chrome Vanadium steel 31CrV3. Non-glare look due to matt chrome plating

Jaw: ground precisely to exact nominal size for optimum contact areas

Slim pattern

Secure grip due to slim profile shaft

6 (MM) DOUBLE OPEN ENDED SPANNERS Code 606383 606421 606448 606472 606537 606588 606626 606642 606650 606677 606685

! 6x7mm 8x9mm 8x10mm 10x11mm 12x13mm 14x15mm 16x17mm 17x19mm 18x19mm 19x22mm 20x22mm

y 122 140 140 157 172 188 205 222 222 236 236

0 0.020 0.025 0.030 0.040 0.060 0.070 0.110 0.155 0.155 0.210 0.210

Code 606707 606731 606758 606774 004518 606812 004520 004521 004522 004523 004524

! 21x23mm 24x26mm 24x27mm 25x28mm 27x32mm 30x32mm 32x36mm 36x41mm 38x42mm 41x46mm 46x50mm

y 247 266 266 280 302 302 328 360 360 400 450

0 0.240 0.300 0.300 0.355 0.460 0.460 0.650 0.850 0.800 1.100 1.600

6 DOUBLE OPEN ENDED SPANNER SETS

Code 607703 607711 607738 607754 607878 607770

! 4M 6M 8M 10 M 11 M 12 M

Contents 10x11 12x13 14x15 16x17 8x9 10x11 12x13 14x15 16x17 19x22 6x7 8x9 10x11 12x13 14x15 16x17 18x19 6x7 8x9 10x11 12x13 14x15 16x17 18x19 6x7 8x9 10x11 12x13 14x15 16x17 18x19 6x7 8x9 10x11 12x13 14x15 16x17 18x19

20x22 20x22 21x23 24x27 20x22 21x23 24x27 30x32 20x22 21x23 24x26 25x28 27x32

0 0.280 0.510 0.690 1.230 1.690 2.040

Adjustable Wrenches

NEW

62P

ADJUSTABLE WRENCHES A heavy-duty, Industrial 15º Adjustable Wrench Chrome vanadium, exceeding international standards as ISO 6787-1982

› › › › › › ›

A smaller angle 15º wrench aligns the wrench with the nut in a manner that offers speed, precision, ergonomic comfort and provides greater leverage distance thus reducing hand & arm fatigue. Non-Protruding on the movable jaw end. This allows a greater ease of use in tight spaces. Thicker Handle provides a comfortable fit making it easy to apply force. Chrome vanadium, exceeding international standards as ISO 6787-1982 Uniform mechanical grinding of face gives wrenches a very flat and strong industrial appearance. With ruler scale. Blister packed.

Close up

Code 6368000 6368190 6368270 6368350 6368430 6368510

! 150 200 250 300 375 450

22 28.6 32.8 38.1 50.0 60.0

y 155 205 255 306 383 460

0 0.155 0.250 0.460 0.700 1.030 1.675

SPANNERS

Slogging Spanners

306 (MM) / 306 (AF) RING SLOGGING SPANNERS

133 (MM) OPEN ENDED SLOGGING SPANNERS

Chrome Vanadium steel 31CrV3. Designed for heavy duty applications. Shot blast finish. In accordance with DIN 7444.

Chrome Vanadium steel 31CrV3. Designed for heavy duty applications. Shot blast finish. In accordance with DIN 133.

*WHILE STOCKS LAST

*WHILE STOCKS LAST Code 010001 010002 010003 010004 010035 010005 6474460 010006 010007 010008 6475940 6476080 6476160 6476240 6476320 6476400 6476590 6476670 6476750 6476830 6476910 6477050 6477130 6477210 6477480 6477560

! 24 27 30 32 34 36 38 41 46 50 55 60 65 70 75 80 85 90 95 100 * 105 * 110 * 115 * 120 125 130

y 185 185 195 195 195 200 205 225 240 250 260 270 290 325 325 345 345 380 380 410 415 435 435 480 510 510

0 0.300 0.400 0.500 0.500 0.400 0.700 0.660 0.800 1.100 1.200 1.500 1.600 2.200 2.500 3.200 3.600 3.900 7.000 7.000 6.600 9.600 9.600 9.600 9.800 9.800 13.600

" 15/16” * 1” * 1.1/8” * 1.1/4” * 1.7/16” 1.1/2” * 1.5/8” * 1.11/16” * 1.3/4” * 1.7/8” * 2” * 2.3/16” * 2.1/4” * 2.3/8” * 2.9/16” 2.5/8” 2.3/4” 3”

y 185 185 185 195 200 200 225 225 240 240 250 260 260 270 290 290 325 325

0 0.400 0.400 0.400 0.500 0.700 0.600 0.800 0.800 1.100 1.100 1.200 1.600 1.600 1.600 2.200 2.200 2.400 3.100

Code 009000 009002 009003 009004 009035 009005 009006 009007 009008 6400850 6400930 6401070 6401150 6401230 6401310 6401580 6401660 6401740 6401820 6401900 6402040 6402120 6402200

! 25 27 30 32 34 36 41 46 50 55 60 65 70 75 80 85 90 95 * 100 105 110 115 120

CLUB HAMMERS

y 180 180 190 195 195 210 225 255 280 310 310 360 360 395 410 410 455 455 500 500 500 525 525

0 0.400 0.400 0.500 0.600 0.600 0.800 1.000 1.300 1.700 2.700 2.700 3.400 4.600 5.900 7.000 6.800 10.000 9.500 14.600 13.500 13.300 16.800 17.100

1 33

inch Code 010051 010050 010053 010054 010056 010057 010058 010059 010060 010062 010063 6479930 6480000 6480190 6480350 6480430 6480510 6480780

AUTOMOTIVE

Hook Spanners

44 CALIPER FACE SPANNERS

40 HOOK SPANNERS In accordance with DIN 1810, Form A. Chrome Vanadium steel 31CrV3. Manganese phosphated. For slotted round nuts.

Code 6333990 6334020 6334100 6334290 6334370 6334450 6334530 6334610 6334880 6334960 6335180 6335260

) 16 - 20 25 - 28 30 - 32 34 - 36 40 - 42 45 - 50 52 - 55 58 - 62 68 - 75 80 - 90 95 - 100 110 - 115

Chrome Vanadium steel 31CrV3. Manganese phosphated. Similar to DIN 3116.

y 110 135 135 170 170 205 205 240 240 280 280 335

0 0.020 0.040 0.045 0.075 0.080 0.115 0.120 0.200 0.210 0.290 0.300 0.480

Code 6354480 6354560 6354640 6354720 6354990

, 3 4 5 6 8

y 178 178 230 230 230

0 0.135 0.140 0.275 0.275 0.285

y 160 160 200 200 200 200 200 200 250 250 250 250 315 315 315

0 0.100 0.100 0.170 0.150 0.220 0.250 0.260 0.300 0.450 0.500 0.650 0.700 1.150 1.500 1.600

Crowfoot Spanners

3114 CROWFOOT SPANNERS

40Z PIN SPANNERS In accordance with DIN 1810, Form A. Chrome Vanadium steel 31CrV3. Manganese phosphated. For cross-drilled nuts.

Chrome Vanadium steel 31CrV3. Chrome plated. Opening at right angle to handle for maximum accessibility.

*WHILE STOCKS LAST / INDENT ONLY Code 6335850 6335930 6336580 6336660 6336740 6336820 6336900 6337040 6337120 6337200 6337390 6337470

) 16 - 18 20 - 22 25 - 28 30 - 32 34 - 36 40 - 42 45 - 50 52 - 55 58 - 62 68 - 75 80 - 90 95 -100

y 110 110 135 135 170 170 205 205 240 240 280 280

0 0.020 0.025 0.040 0.045 0.075 0.080 0.115 0.120 0.200 0.210 0.290 0.300

Code 6670050 6670130 6676920 6670210 6677060 6670480 6677140 6670560 6670640 6670720 6670800 6670990 6671020 6671290 6671370

! 13 * 14 * 16 * 17 * 18 * 19 * 21 * 22 * 24 * 27 * 30 * 32 * 36 * 46 * 50 *

SOCKETS & ACCESSORIES 18 - 49

SOCKETS & ACCESSORIES

(1/4”) SETS / RATCHETS 20

(1/4”) SOCKETS / ACCESSORIES 22

(3/8”) SETS / RATCHETS 24

(3/8”) SOCKETS / ACCESSORIES 25

(1/2”) SETS / RATCHETS 28

(1/2”) SOCKETS / ACCESSORIES 36

(3/4”) SETS / RATCHETS 42

(3/4”) SOCKETS / ACCESSORIES 44

(1”) SETS / RATCHETS / SOCKETS / ACCESSORIES 47

SOCKETS

Socket Manufacturing Process A key feature of GEDORE’S socket manufacture is the use of chrome vanadium steel in a hot forging process. As the heated metal is forged, the grains are bent to follow the shape of the forging die, thus maintaining an unbroken grain structure throughout the article. This grain structure and the resulting elastic and toughness properties of a GEDORE socket can easily be compared to the fibrous resilience of a tree branch. As chrome vanadium steel cannot be cold forged, GEDORE’S competitors using cold forging processes are forced to use metallurgically modified steels to accommodate this type of manufacture, resulting in inferior elastic and toughness properties.

In summary GEDORE sockets are hot forged to obtain a superior strength to weight ratio. Competitor sockets are cold forged primarily to reduce manufacturing cost.

Hot forged.

Blank cropped to size from 31CrV3.

Hot forged in the forging press.

6. Degreased – grease would destroy the protective gas atmosphere in hardening.

Machined to size.

Outside diameter turned and knurled using hightech CNC machinery.

Counterbored, square socket drive fluted, manufacturer and socket size permanently stamped.

Hardened under protective gas atmosphere, followed by annealing.

Cold forged.

Sand blasted in preparation for surface coating.

Nickel plated and matt-chrome plated. The electrolytically applied nickel coating ensures corrosion protection. The electroplated chrome improves the look and gives the socket a perfect finish.

(1/4") square drive Sets (1/4")

20 E SOCKET SETS 1/4"

R 1

For manually operated sockets and accessories with 1/4” square drive. Chrome Vanadium steel 31CrV3. Dimensions: 200x120x38mm.

Code 6172100

No. No.20 EMZ

Ratchet ! 2093 Z-94

6172250

No.20 MDX

! 2093 Z-94

6172450

No.20 EAU-3

# 2093 U-3

Sockets 1 20 4 4,5 5 6 7 8 9 10 11 13

Accessories + 2087 2090-4 ) 2095 2098 2090-4 1 20 4 5 6 7 8 9 10 11 12 13 ‚ ) 2095 IKS20 PZD1 PZD2 PZD3 2098 IKS20 PH1 PH2 PH3 20 MDX Foam Insert IS20-4 IS20-5.5 IS20-6.5 IS20-7 ITX20 T8 T10 T15 T20 T25 T27 T30 T40 MDX Plastic Case IN20L 3 4 5 6 7 8 1 20 3/16 7/32 1/4 9/32 5/16 11/32 + 2087 2090-4 3/8 7/16 1/2 ‚ ) 2095 2098

0 0.71

1.197

0.76

NEW

20 NZ SOCKET SETS 1/4"

For manually operated sockets and accessories with 1/4” square drive. Chrome Vanadium steel 31CrV3. Dimensions: 200x120x38mm.

20NZA

20NZI

Code 6172460

No. No.20 NZA

Ratchet ! 2093 Z-94

Sockets 1/4“ drive sockets 4 4,5 5 6 7 8 9 10 11 12 13 14 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2

Accessories + 2087 2090-2 / 4 Extensions ) 2095 2098 2088 Flexible Extension Foam Insert Plastic Case

0 1.050

6172465

No.20 NZI

! 2093 Z-94

1/4“ drive sockets 4 4.5 5 6 7 8 9 10 11 12 13 14mm 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 Torx T8 T10 T15 T20 T25 T27 T30 T40 Screwdriver bits IS20 4 5.5 6.5 7 Screwdriver sockets IKS20 PH0 PH1 PH2 PH3 ‚

2090-2 / 4 Extensions ) 2095 2098 + 2087 2088 Flexible Extension Foam Insert Plastic Case

1.150

Ratchets (1/4")

2093 U-3 REVERSIBLE RATCHET 1/4"

2093 U-10 m b REVERSIBLE RATCHET 1/4"

› Especially for working in confined spaces, as in the automotive business. › According to DIN 3122, ISO 3315. › With non-slip metal disc change, fine-toothed (72 teeth) and robust. › Return angle of five degrees. › Non-slip 2-component handle with hanging hole. › For hand-operated sockets and accessories with square drive

› Particularly for heavy duty use in industry and with utility vehicles. › According to DIN 3122, ISO 3315. › With recessed lever change, locks in middle position. › Return angle of five degrees. › Non-slip 2-component handle with hanging hole. › For hand-operated sockets and accessories with square drive

› Ball locking device. › Gedore vanadium steel 31CrV3, chrome plated.

as per DIN 3120 - C 6.3, ISO 1174.

Code No. 6170590 2093 U-3

a„ 1/4

a 6.3

A° 5

y 129

0 0.095

Code No. 6180470 2093 U-10

a„ 1/4

a 6.3

A° 15

y 129

0 0.109

SOCKETS

2093 Z-94 RATCHET HANDLE WITH COUPLER 1/4"

a„ 1/4

a 6.3

A° 18

y 129

› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3120.

0 0.076

Sockets (1/4")

20 (MM) SOCKETS 1/4"

R 1

hexagon › Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3120. Code 6165400 6165590 6165670 6165830 6165910 6166050 6166130 6166210 6166480 6166560 6166640 6166720

! No.20 4mm No.20 4.5mm No.20 5mm No.20 6mm No.20 7mm No.20 8mm No.20 9mm No.20 10mm No.20 11mm No.20 12mm No.20 13mm No.20 14mm

y 25 25 25 25 25 25 25 25 25 25 25 25

0 0.009 0.010 0.010 0.010 0.012 0.014 0.016 0.020 0.025 0.030 0.035 0.037

R 1

hexagon 6167020 6167100 6167290 6167370 6167450 6167530 6167610 6167880 6167960 6161840

! No.20 3/16AF No.20 7/32AF No.20 1/4AF No.20 9/32AF No.20 5/16AF No.20 11/32AF No.20 3/8AF No.20 7/16AF No.20 1/2AF No.20 9/16AF

Code 6191400 6191590 6191670 6191830 6191910 6192050 6192130 6192210 6192480 6192560 6192640

! 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0

y 50 50 50 50 50 50 50 50 50 50 50

0 0.017 0.017 0.018 0.020 0.024 0.027 0.030 0.033 0.047 0.050 0.054

R IN20L (MM) SCREWDRIVER BIT SOCKET 1/4" for in-hex screws, long pattern

20 (AF) SOCKETS 1/4" Code

R 1

hexagon, long pattern

› Used throughout industry and the automotive world. › According to DIN 3122, ISO 3315. › With square coupler, medium-fine toothed, extremely rugged. › Return angle of eighteen degrees. › For hand-operated sockets and accessories with square drive as per DIN 3120 - C 6.3, ISO 1174. › Ball locking device. › Gedore vanadium steel 31CrV3, chrome plated.

Code No. 6170750 2093 Z-94

20L (MM) SOCKETS 1/4"

› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3.

Code 1933256 1933264 1933272 1933280 1933298 1933299

$ 3 4 5 6 7 8

y 60 60 60 60 60 60

0 0.024 0.025 0.027 0.029 0.038 0.050

R IKS 20 SCREWDRIVER BIT SOCKET 1/4" for cross-head screws PH

y 25 25 25 25 25 25 25 25 25 25

0 0.009 0.009 0.025 0.010 0.013 0.015 0.018 0.023 0.029 0.036

› Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3. Code 6174579 6174580 6174660 6174740

No. IKS 20 0 IKS 20 1 IKS 20 2 IKS 20 3

; PH 0 1 2 3

y 28 28 28 28

0 0.011 0.011 0.012 0.012

R R ITX20 SCREWDRIVER BIT SOCKET 1/4“

Accessories (1/4")

2097 SWIVEL HANDLE 1/4"

for recessed TORX® head screws › Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3120. › TORX® = registered trademark of Acument Intellectual

› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

Properties, LLC. USA

Code 6190430 6190780 6190860 6190940 6191080 6191160 6191240 6265890

No. ITX 20 T8 ITX 20 T10 ITX 20 T15 ITX 20 T20 ITX 20 T25 ITX 20 T27 ITX 20 T30 ITX 20 T40

7 T8 T10 T15 T20 T25 T27 T30 T40

+ M2,5 M3 - M3,5 M3,5 - M4 M4 - M5 M4,5 - M5 M4,5 - M6 M6 - M7 M7 - M8

& 2,31 2,74 3,27 3,86 4,43 4,99 5,52 6,65

y 30.5 30.5 30.5 30.5 30.5 30.5 30.5 33.5

0 0.013 0.014 0.014 0.014 0.014 0.014 0.015 0.025

R IS 20 SCREWDRIVER BIT SOCKET 1/4" for slotted head screws › Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3.

Code 6171560 6171640 6174230 6174310

No. IS 20 4x0,8 IS 20 5,5x1 IS 20 6,5x1,2 IS 20 8x1,6

?K 4.0 5.5 6.5 8.0

L 0.8 1.0 1.2 1.6

y 28 28 28 28

0 0.011 0.012 0.012 0.012

IKS 20 PZD SCREWDRIVER BIT SOCKET 1/4" › Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove › Manually operated sockets with knurled base. › Chrome plated and polished. › Chrome Vanadium steel 31CrV3.

< PZ 1 2 3

a 6.3

y 146

0 0.094

y 55 97 148 220 305

0 0.025 0.041 0.061 0.090 0.124

y 115

0 0.039

2090 EXTENSIONS 1/4" › For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

2090-4

Code 6170320 6170400 6171210 6171211 6173340

No. 2090-2 2090-4 2090-6 2090-10 2090-12

a„ 1/4 1/4 1/4 1/4 1/4

a 6.3 6.3 6.3 6.3 6.3

› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

Code No. 6170160 2087

a„ 1/4

a 6.3

2094 COUPLER 1/4"

for cross-head screws Pozi PZ

No. IKS 20 PZD 1 IKS 20 PZD 2 IKS 20 PZD 3

a„ 1/4

2087 SLIDING T-BAR 1/4"

Code 6187130 6187210 6187480

Code No. 6171050 2097

› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123. y 28 28 28

0 0.012 0.013 0.014

Code No. 6170830 2094

a„ 1/4

a 6.3

y 19.8

0 0.006

SOCKETS

2098 DRIVING HANDLE 1/4"

Sets (3/8")

› According to DIN 3122, ISO 3315. › For hand-operated sockets with square drive as per DIN 3120, ISO 1174 › Ball locking device

Code No. 6171480 2098

a„ 1/4

(3/8") Square Drive

D30 FMZ SOCKET SET 3/8"

a 6.3

y 140

2088 FLEXIBLE EXTENSION 1/4"

0 0.070

c !

› Manually operated 3/8” sockets and accessories. › Supplied in blue powder coated, D19 K steel box. › Dimensions: 281x77x37mm.

› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. Code 623202 Code No. 6170240 2088

a„ 1/4

a 6.3

y 140

2095 UNIVERSAL JOINT 1/4"

a„ 1/4

Ratchet ! 3093 Z-94

0 0.045

› For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

Code No. 6170910 2095

No. D30 FMZ

Sockets Accessories 3090-125 3 D 30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

D30 HMZ SOCKET SET 3/8"

0 1.490

c !

› Manually operated 3/8” sockets and accessories. › Supplied in blue powder coated, D19 J steel box. › Dimensions: 290x186x52mm.

a 6.3

y 38

0 0.026

2030 CONVERTER 1/4" TO 3/8" › For manually operated sockets and accessories with 1/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123. 3/8“ 10 mm

1/4“ 6,3 mm

Code No. 6170080 2030

„ Q 1/4

Q 6.3

„ a 3/8

a 10

y 26

0 0.020

Code No. 623962 D30 HMZ

Ratchet ! 3093 Z-94

Sockets Accessories 3 D 30 6 7 8 9 + 3087 3090-250 10 11 12 13 14 15 3090-125 16 17 ) 3095 18 19 20 21 22 C 3081

0 2.750

NEW

D30 NZZ SOCKET SET 3/8"

c !

› Manually operated 3/8” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › In high-density foam insert.

Sockets (3/8")

D 30 (MM) SOCKETS 3/8"

3 S

bi-hexagon UD profile › Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3124. Code Ratchet 623968 ! 3093 Z94

Sockets 3 D 30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22mm 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 25/32 13/16 7/8

Accessories 3087 Sliding T bar 3090 125mm Extension 3090 250mm Extension Plastic Insert Metal Case

0 3.025

*Hexagon

Code 6230160 6230240 6230320 6230400 6230590 6230670 6230750 6230830 6230910 6231050 6231130 6231210 6231480 6231560 6231640 6231720 6231800

Ratchets (3/8")

3093 U-3 REVERSIBLE RATCHET 3/8" › For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, fine-toothed (72 teeth) and robust. › Return angle of five degrees. › In accordance with SANS 1113 and DIN 3122.

! No.30 6mm* No.30 7mm* No.30 8mm* No.30 9mm* No.30 10mm* D30 11mm D30 12mm D30 13mm D30 14mm D30 15mm D30 16mm D30 17mm D30 18mm D30 19mm D30 20mm D30 21mm D30 22mm

D 30 (AF) SOCKETS 3/8" Code No. 6237090 3093 U-3

a„ 3/8

a 10

A° 5

y 200

0 0.244

a 10

A° 10

3 S

bi-hexagon UD profile

*Hexagon

Code

› For manually operated sockets and accessories with 3/8” square drive. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, fine-toothed (72 teeth) and robust. › Return angle of ten degrees. › In accordance with SANS 1113 and DIN 3122.

a„ 3/8

0 0.025 0.024 0.024 0.027 0.029 0.029 0.033 0.038 0.039 0.040 0.046 0.056 0.058 0.066 0.066 0.078 0.088

› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3124.

3093 Z-94 RATCHET HANDLE WITH COUPLER 3/8“

Code No. 6237680 3093 Z-94

y 28 28 28 28 28 28 28 28 28 30 30 30 30 30 30 30 31

y 200

0 0.223

2016613 2101009 1997122 2101017 1997130 6232610 6232880 6232960 6233180 6233260 6233340 6233420 1997157 1997165 6232020

! D30 1/4AF D30 9/32AF D30 5/16AF D30 11/32AF D30 3/8AF D30 7/16AF D30 1/2AF D30 9/16AF D30 19/32AF D30 5/8AF D30 11/16AF D30 3/4AF D30 25/32AF D30 13/16AF D30 7/8AF

y 28 28 28 28 28 28 28 28 30 30 30 30 30 30 31

0 0.025 0.024 0.024 0.026 0.032 0.028 0.038 0.035 0.041 0.046 0.056 0.065 0.070 0.074 0.083

SOCKETS

TX 30 SOCKETS 3/8"

for protruding TORX® head screws

3094 COUPLER 3/8"

! TX30 E5 TX30 E6 TX30 E7 TX30 E8

9 E5 E6 E7 E8

› For manually operated sockets and accessories

› Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

Code

a„ 3/8

with 3/8” square drive.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

Code 6250270 6250350 6250430 6250510

Accessories (3/8")

+ M4 M5 M6 M6-M7

& 4.73 5.74 6.16 7.52

y 28 28 28 28

ITX 30 SCREWDRIVER BIT SOCKETS 3/8"

0 0.025 0.025 0.025 0.027

No.

6237760 3094

a 10

y 29

0 0.019

y 50

0 0.053

3095 UNIVERSAL JOINT 3/8" › For manually operated sockets and accessories with 3/8” square drive.

› CHROME VANADIUM steel – 531CrV3. › In accordance with ISO 3316 and DIN 3123. › With ball locking device.

for recessed TORX® head screws

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

Code

6246320 6246830 6247210 6247560 6247720

ITX30 T 20 ITX30 T 25 ITX30 T 27 ITX30 T 30 ITX30 T 40

T20 T25 T27 T30 T40

M4-M5 M4,5-M5 M4.5-M6 M6-M7 M7-M8

& 3.86 4.43 4.99 5.52 6.65

y 49 49 49 49 49

IN 30 (MM) SCREWDRIVER BIT SOCKETS 3/8"

0 0.050 0.051 0.051 0.051 0.052

N S

„ a 3/8

a 10

Q 3/8

„

Q 10

3019 CONVERTER 3/8" TO 1/2" › For manually operated sockets and accessories with 3/8” square drive.

› CHROME VANADIUM steel – 31CrV3. › In accordance with SANS 1113 and DIN 3123.

for in-hex screws

Code No. 6241010 IN30 4mm

L 47

0 0.038

6241280 IN30 5mm

0.390

6241360 IN30 6mm

0.041

6241440 IN30 8mm

0.053

6242920 IN30 10mm

0.073

Code No. 6238140 3095

Code No. 6236010 3019

„ a 1/2

1/2“ 12,5 mm

3/8“ 10 mm

a 12,5

„ Q 3/8

Q 10

y 36

0 0.057

S 3020 REDUCER 3/8" TO 1/4"

3090 EXTENSIONS 3/8"

› For manually operated sockets and accessories

› ›

› Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

with 3/8” square drive. Chrome Vanadium steel 31CrV3. In accordance with SANS 1113 and DIN 3122.

with 3/8” square drive.

3/8“ 10 mm

1/4“ 6,3 mm

3090-250

3090-125

Code No. 6236280 3020

„

a 1/4

a 6,3

„

Q 3/8

Q 10

y 28

0 0.026 3090-75

Code 6236600 6236790 6236870

3081 L-HANDLE 3/8"

No. 3090/ 75 3090/125 3090/250

„ a 3/8 3/8 3/8

a 10 10 10

y 75 125 250

0 0.071 0.110 0.197

a 10

y 0 250 0.171

› For manually operated sockets and accessories with 3/8” square drive.

› Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

3096 SWIVEL HANDLE 3/8" › For manually operated sockets and accessories with 3/8” square drive.

› Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

Code No. 6236360 3081

„ a 3/8

a 10

y 180

0 0.163

3087 SLIDING T-BAR 3/8"

30 SPARES 3/8"

› For manually operated sockets and accessories › ›

„ a 3/8

Code No. 6238220 3096

with 3/8” square drive. Chrome Vanadium steel 31CrV3. In accordance with SANS 1113 and DIN 3122.

› For the 3096 power bar and 3093 U-3 ratchet. › For F and H socket sets. Blue powder coated steel case. › Black matt-finish insert.

545767 3096 Repair Kit 545759 3093 U-3 Repair Kit

Code No. 6236520 3087

„ a 3/8

a 10

y 0 163 0.128

514632 514640 515175 515280

D D D D

19 19 30 30

K Box J Box F Insert H Insert

SOCKETS

(1/2") square drive Sets (1/2")

d !

19 HMZ / KMZ SOCKET SETS 1/2" 15 / 14 pieces

19 SR SOCKET SETS 1/2"

T !

› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 K steel box. › Dimensions: 281x77x46mm.

13 pieces › Manually operated 1/2” sockets and accessories. › Blister packed. Code 612286

No. Sockets C19 HMZ C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 Accessories ! 1993 Z-94 1990/125 Extension

0 1.940

614610

1.930

D19 HMZ D19 8 10 11 12 13 14 15 16 17 19 22

Accessories ! 1993 Z-94

612316 Code 611921

No. Sockets SR-C19Z 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 Accessories ! 1993 Z-94 1990/75 Extension Socket Rail

0 1.390

616834

1.460

SR-D19Z 10 12 13 14 15 16 17 19 22 24

Accessories ! 1993 Z-94

1990/75 Extension

Accessories ! 1993 Z-94

614653

1990/125 Extension

C19 KMZ C19 10-3/8 12 13-1/2 14 15-19/32 17 19-3/4 22 24-15/16 27-1.1/16 1990/125 Extension

D19 KMZ D19 10 12 13 14 15 17 19 22 24 27

Accessories ! 1993 Z-94

d !

19 1BMZ SOCKET SETS 1/2"

20 pieces

23 pieces

› Manually operated 1/2” sockets. › Supplied in blue powder coated, D19 K steel box. › Dimensions: 281x77x46mm.

› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 J steel box.

614122 616419

2.050

1990/125 Extension

Socket Rail

19 AK / MK SOCKET SETS 1/2"

Code 612936

2.010

No. Sockets C19 MK C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 23 24-15/16 26 -1. 27-1.1/16 28 30-1.3/16 32-1.1/4 D19 MK D19 8 10 11 12 13 14 15 16 17 19 22 23 24 26 27 28 30 32 D19 AK D19 5/16AF 11/32AF 3/8AF 7/16AF 1/2AF 9/16AF 19/32AF 5/8AF 11/16AF 3/4AF 13/16AF 7/8AF 15/16AF 1.AF 1.1/16AF 1.1/8AF 1.3/16AF 1.1/4AF

T !

0 2.270 2.430 2.250

Code 615595

No. 1B Spanners D19 1BMZ 10 11 13 14 17 19 22

Ratchet Sockets ! 1993 Z-94 10 11 12 13 14 15 16 17 1 9 22

Accessories 0 4.540 1990-125 145-250 137-250

T 19 GMU-10T SOCKET SETS 1/2"

T !

19/22 TMU-10T SOCKET SETS 1/2"

18 pieces

29 pieces

› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 J steel box. › Dimensions: 290x186x52mm.

› Manually operated 1/2” sockets and

T !

accessories.

› Supplied in blue powder coated, D19 T steel box.

› Dimensions: 435x170x50mm.

*WHILE STOCKS LAST Code No. 616699 D19 GMU-10T

Ratchet Sockets Accessories 0 5.700 $ 1993 U-10 T 10 11 12 13 14 + 1987 15 17 18 19 21 1990-125 22 24 1990-250

5.700 611956 C19 GMU-10T * $ 1993 U-10 T 10 11 12 13 14 + 1987 15 17 18 19 21 1990-125 22 24 1990-250

19/22 TMZ SOCKET SETS 1/2"

T !

Code No. Ratchet Sockets 611999 C19/22 TMU-10T $ 1993 8-5/16 9-11/32 103/8 11 12 13-1/2 14 U-10 T 15-19/32 16-5/8 17 18-11/16 19-3/4 20-25/32 2113/16 22 24-15/16 26 -1. 27-1.1/16 28 291.1/8 30-1.3/16 32-1.1/4 616532 D19/22 TMU$ 1993 8 9 10 11 12 13 14 10T 15 16 17 18 19 20 U-10 T 21 22 24 26 27 28 29 30 32

19 TM97U-10T SOCKET SETS 1/2"

29 pieces

22 pieces

› Manually operated 1/2” sockets

› Manually operated 1/2” sockets and

›

› Supplied in blue powder coated,

›

616524

No. Ratchet C19/22 TMZ ! 1993 Z-94

D19/22 TMZ ! 1993 Z-94

5.400 + 1987 1990-125 1990-250 ) 1995

T !

accessories.

and accessories. Supplied in blue powder coated, D19 T steel box. Dimensions: 435x170x50mm.

Code 611980

Accessories 0 5.400 + 1987 1990-125 1990-250 ) 1995

D19 T steel box.

› Dimensions: 435x170x50mm.

Sockets 8-5/16 9-11/32 10-3/8 11 12 13-1/2 14 1519/32 16-5/8 17 18-11/16 19-3/4 20-25/32 21-13/16 22 24-15/16 26 -1.27-1.1/16 28 29-1.1/8 30-1.3/16 32-1.1/4 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 30 32

Accessories 0 1990-125 5.200 1990-250 + 1987 ) 1995

1990-125 5.200 1990-250 + 1987 ) 1995

Code No. Ratchet Sockets 612413 C19 TM97U-10T $ 1993 U-10 T 10-3/8 11 12 13-1/2 14 1519/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 301.3/16 32-1.1/4 615455 D19 TM97U-10T $ 1993 U-10 T 10 11 12 13 14 15 16 17 19 20 22 24 27 30 32

Accessories 1990-125 1990-250 1997-375 50-20.8

0 4.540

1990-125 1990-250 1997-375 50-20.8

4.740

SOCKETS

19 TMU / TAU-10T SOCKET SETS 1/2"

T !

27 pieces › Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 T steel box. › Dimensions: 435x170x50mm.

Code 612464

No. C19 TMU-10T

Ratchet $ 1993 U-10 T

615196

D19 TMU-10T

$ 1993 U-10 T

616206

D19 TAU-10T

$ 1993 U-10 T

Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26 -1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4

Accessories +1987 1990-125 1990-250 ) 1995 / 1985 8 10 11 12 13 14 15 16 17 19 21 +1987 22 23 24 26 27 28 30 32 1990-125 1990-250 ) 1995 / 1985 5/16AF 3/8AF 13/32AF 7/16AF 1/2AF +1987 9/16AF 19/32AF 5/8AF 11/16AF 3/4AF 1990-125 25/32AF 13/16AF 7/8AF 15/16AF 1. AF 1990-250 1.1/16AF 1.1/8AF 1.3/16AF 1.1/4AF ) 1995 / 1985

19 TMZ / TMAZ SOCKET SETS 1/2"

0 5.620

5.700

5.650

T !

27 pieces › Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 T steel box. › Dimensions: 435x170x50mm.

Code 612456

No. C19 TMZ

Ratchet ! 1993 Z-94

614831

D19 TMZ

! 1993 Z-94

614572

D19 TMA-Z

! 1993 Z-94

Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26 -1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4

Accessories +1987 1990-125 1990-250 ) 1995 / 1985 8 10 11 12 13 14 15 16 17 19 21 +1987 22 23 24 26 27 28 30 32 1990-125 1990-250 ) 1995 / 1985 10 13 14 15 16 17 19 22 24 27 30 +1987 32 3/8 7/16 1/2 9/16 11/16 13/16 1. 1990-125 1990-250 ) 1995 / 1985

0 5.480

5.560

5.420

T C19 YMAU-10T SOCKET SETS 1/2"

T !

32 pieces › Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 T steel box. › Dimensions: 526x190x52mm.

Code 612367

No. C19 YMAU-10T

Ratchet $ 1993 U-10 T

Sockets 8-5/16 9-11/32 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18 19-3/4 21-13/16 22 24-15/16 26 -1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 1990-125 1990-250 1997-375 50-20.8 + 1987 ) 1995Joint

0 7.230

T !

D19 YMAU-10T SOCKET SET 1/2" 43 pieces › Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › Dimensions: 526x190x52mm.

Code 616222

No. D19 YMAU-10T

Ratchet $ 1993 U-10 T

Sockets Accessories 8 9 10 11 12 13 14 15 16 17 1990-125 18 19 20 21 22 23 24 27 5/16AF 1990-250 11/32AF 3/8AF 13/32AF 7/16AF 1/2AF + 1987-375 9/16AF 19/32AF 5/8AF 11/16AF 3/4AF ) 1995 25/32AF 13/16AF 7/8AF 15/16AF 1. AF 50-20.8 / 1985

0 7.390

SOCKETS

NEW

D19 NZU-Z94 SOCKET SET 1/2"

T !

› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated steel box. › In high-density foam insert.

Code 615298

Reversible Ratchet ! 1993 Z-94

Sockets D19 10 11 12 13 14 15 16 17 18 19 21 22 23 24 26 27 30 32mm 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1.1/16 1.1/8 1.3/16 1.1/4

Accessories +1987 1990-125 1990-250 ) 1995 50/20.8mm

19 YM1B-10T SOCKET SETS 1/2"

T !

› Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › Dimensions: 526x190x52mm. Code 612383

No. C19 YM1B-10T

1B Spanners 10 11 12 13 14 15 16 17 19 22 24

Ratchet $ 1993 U-10 T

Sockets 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 24-15/16

616230

D19 YM1B-10T

10 11 12 13 14 15 16 17 19 22 24

$ 1993 U-10 T

10 11 12 13 14 15 16 17 19 22 24

Accessories 1990-125 1997-375 50-20.8

0 6.040

1990-125 1997-375 50-20.8

6.500

T !

19 62MU-10T SOCKET SETS 1/2" › Manually operated 1/2” sockets and accessories. › Supplied in blue powder coated, D19 Y steel box. › Dimensions: 526x190x52mm.

Code 612391

No. C19 62MU-10T

Spanners Ratchet No.2 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 $ 1993 U-10 T No.6 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22

Sockets 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 20-25/32 21-13/16 22

616001

D19 62MU-10T

No.2 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 $ 1993 U-10 T No.6 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22

10 11 12 13 14 15 16 17 18 19 20 21 22

Accessories 1990-125 1990-250 + 1987 ) 1995 1990-125 1990-250 + 1987 ) 1995

0 6.760

7.120

T IN19 PM-6 / PA-6 SOCKET SETS 1/2"

T !

IN19 PM-5D / PA-5D SOCKET SETS 1/2"

T !

› Manually operated 1/2” sockets. › Supplied in black matt-finish insert.

› Manually operated 1/2” sockets. › Supplied in black matt-finish insert. › Also available in a blister pack.

Code 617423 617458

Code 617474 617849

No. Sockets PM-6 IN19 5 6 8 10 12 14 PA-6 IN19 3/16AF 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF

0 1.260 1.100

617476

SR PM-6 IN19 5 6 8 10 12 14 (Including Holding Rail and Adaptor)

0.600

No. Sockets PM 5D IN19 6 8 10 12 14 IN19L 6-100 8-100 10-100 12-100 14-100 PA 5D IN19 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF IN19L 1/4-100 5/16-100 3/8-100 1/2-100 9/16-100

IN19 PM-10 / PA-10 SOCKET SETS 1/2"

0 1.250 1.100

T !

› Manually operated 1/2” allen key sockets. › Supplied in black matt-finish insert.

IN19 PM-9 / PA-9 SOCKET SETS 1/2"

T !

Code 617415 617431 617417

› Manually operated 1/2” sockets. › Supplied in blue powder coated Ref D30 K steel box. › Dimensions: 281x77x37mm. › Also available in a blister pack.

No. Sockets PM-10 IN19 5 6 7 8 9 10 12 14 17 19 PA-10 IN19 3/16AF 7/32AF 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF 5/8AF 9/32AF IKS19 2 SR-PM10 IN19 5 6 7 8 9 10 12 14 17 19 (Including Holding Rail and Adaptor)

INX19 SOCKET SETS 1/2"

0 1.260 1.100 1.220

T !

› Manually operated 1/2” spline sockets. › Supplied in black matt-finish insert.

Code 615625 615641 615627

No. Sockets PM-9 IN19 5 6 7 8 9 10 12 14 17 PA-9 IN19 3/16AF 7/32AF 1/4AF 9/32AF 5/16AF 3/8AF 1/2AF 9/16AF 5/8AF SR-PM9 IN19 5 6 7 8 9 10 12 14 17 (Including Holding Rail and Adaptor)

0 1.500 1.470

Code 617989

0.960

617601

No. Sockets PM-5D INX19 5 6 8 10 12 INX19L 6-100 8-100 10-100 12-100 IKS19 2 6 INX19-6 5 6 8 10 12 IKS19 2

0 1.320 0.510

SOCKETS

ITX / TX19 FMT TORX® SOCKET SET 1/2"

T !

ITX19 TORX® SOCKET SETS 1/2"

T !

› Manually operated 1/2” sockets. › Supplied in blue powder coated Ref D30 K steel box. › Dimensions: 281x77x37mm. › Also available in a blister pack.

› Manually operated 1/2” sockets. › Supplied in blue powder coated, D19 J steel box. › Dimensions: 290x186x52mm.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

Code 665983 665986

No. FMT

Sockets ITX19 T20 T25 T27 T30 T40 T45 T50 TX19 E10 E11 E12 E14 E16 E18 E20 E24

TX19 SOCKET SETS 1/2"

0 1.100

T !

Sockets TX19 E10 E11 E12 E14 E16 E18 E20 E24 TX19 E10 E11 E12 E14 E16 E18 E20 E24 (Including Holding Rail and Adaptor)

Code

No.

545694 545708

1993 Z Repair Kit 1996/7 Repair Kit

19 BOXES & INSERTS

› Blue powder coated steel case. › Black matt-finish insert.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA No. FT SR-FT

19 REPAIR KITS

› For the 1993Z ratchet and 1996/7 power bar.

› Manually operated 1/2” sockets. › Supplied in blue powder coated, D30 K steel box. › Dimensions: 281x77x37mm. › Also available in a blister pack.

Code 665991 665994

Sockets ITX19 T20 T25 T27 T30 T40 T45 T50 ITX19 T20 T25 T27 T30 T40 T45 T50 (Including Holding Rail and Adaptor)

SPARES

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA Code 666009

No. MT SR-MT

0 0.510 0.620

Code 514640 514632 514667 514675 515450 515965 515485 515975 544191 515507 544213 515310 515515 544221 515337 544205 515353 515426 515418 544248 515396 515876 515868 515841 515981

No. D 19 J Box D 19 K Box D 19 T Box D 19 Y Box C 19 Y Insert D 19 GM Insert D 19 H Insert D 19 IM Insert D 19 J Insert D 19 K Insert D 19 T Insert D 19 T 97 Insert D 19/22 T Insert D 19 Y Insert D 19 YM1B Insert D 19 1B Insert D 19 62MU Insert IN19 - 5D Insert IN19 - 6 Insert IN19 - 9 Insert IN19PM - 10 Insert ITX19 MT Insert TX19 FT Insert ITX/TX19 FM Insert K19 Insert

0 1.000 0.540

T Ratchets (1/2")

1993 U-10 T REVERSIBLE RATCHET 1/2"

1993 U-3 REVERSIBLE RATCHET 1/2"

› For manually operated sockets and accessories with 1/2”

› For manually operated sockets and accessories with 1/2” square

› › › › › ›

› With recessed lever change. › Ball locking device. › Return angle of five degrees. › Non-slip 2-component handle. › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3.

› ›

drive.

square drive. In accordance with SANS 1113 and DIN 3122. With recessed lever change. Push-button release. Return angle of seven and a half degrees. Non-slip 2-component handle. Locks in the middle position: When the lever is flipped, it automatically engages for clockwise or anti-clockwise operation. Chrome Vanadium steel 31CrV3. Ball locking device.

Code 614262

No. 1993U-10T

a„ 1/2

A° 7,5

a 12.5

y 270

0 0.584

Code 614424

No. 1993U-3

a„ 1/2

a 12.5

A° 5

1993 U-10 K PLASTIC RATCHET 1/2"

1993 Z-94 RATCHET HANDLE WITH COUPLER 1/2"

› Maximum torque: 70Nm. › For manually operated sockets and accessories with 1/2” square drive. › Return angle of seven and a half degrees. › Made from sturdy compound material with a steel mechanism. › Lightweight. › Dimensions: 44 x 145 x 42.2mm. › Reversible ratchet.

› For manually operated sockets and accessorieswith 1/2” square drive. › With square coupler, medium-fine toothed, extremely rugged › Return angle of seven and a half degrees. › Reversible ratchet. › Non-slip 2-component handle › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3.

Code 624489

No. 1993U-10K

a„ 1/2

a 12.5

A° 7,5

y 145

0 0.226

Code 614459

No. 1993Z-94

a„ 1/2

a 12.5

A° 7,5

y 270

0 0.544

y 270

0 0.430

SOCKETS

Sockets (1/2")

C 19 (MM) / (AF) SOCKETS 1/2"

D 19 (MM) / (AF) SOCKETS 1/2“

C profile

bi-hexagon UD profile

› Manually operated sockets with thin walls and knurled base. › CHROME VANADIUM steel – 31CrV3. › Chrome plated and polished. › In accordance with SANS 1113 and DIN 3124.

Code 612006 612014 612022 612030 612057 612065 612073 612081 612103 612111 612138 612146 612154 612162 612170 612189 612197 612200 612219 612227 612235 612243 612251 612278

! C19 8mm-5/16 C19 9mm-11/32 C19 10mm-3/8 C19 11mm C19 12mm C19 13mm-1/2 C19 14mm C19 15mm-19/32 C19 16mm-5/8 C19 17mm C19 18mm-11/16 C19 19mm-3/4 C19 20mm-25/32 C19 21mm-13/16 C19 22mm C19 23mm C19 24mm-15/16 C19 25mm C19 26mm-1. C19 27mm-1.1/16 C19 28mm C19 29mm-1.1/8 C19 30mm-1.3/16 C19 32mm-1.1/4

612308 C19 7/16AF 612324 C19 9/16AF 612375 C19 7/8AF

y 38.0 38.0 38.0 38.0 38.0 38.0 38.0 40.0 40.0 40.0 40.0 40.0 40.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 43.0 43.0 43.0 43.0

0 0.056 0.054 0.055 0.057 0.058 0.057 0.059 0.065 0.065 0.073 0.062 0.078 0.084 0.096 0.099 0.121 0.124 0.130 0.135 0.145 0.148 0.159 0.175 0.189

38.0 38.0 41.5

0.056 0.061 0.105

K19 1/2“ IMPACT SOCKETS

INK19 1/2“ IMPACT ALLEN KEY SOCKETS

Code

613304 613312 613320 613339 613347 613355 613363 613371 613398 613401 613428 613436 613444 613452 613460 613479 613487 613495 613509 613517 613525 613533 613541 613576 613584 613568

D19 8mm D19 9mm D19 10mm D19 11mm D19 12mm D19 13mm D19 14mm D19 15mm D19 16mm D19 17mm D19 18mm D19 19mm D19 20mm D19 21mm D19 22mm D19 23mm D19 24mm D19 25mm D19 26mm D19 27mm D19 28mm D19 29mm D19 30mm D19 32mm D19 33mm D19 36mm

38.0 38.0 38.0 38.0 38.0 38.0 38.0 40.0 40.0 40.0 40.0 40.0 40.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 43.0 43.0 43.0 43.0 44.5 44.5

0.056 0.053 0.055 0.055 0.057 0.057 0.061 0.065 0.072 0.067 0.065 0.074 0.088 0.096 0.100 0.111 0.122 0.135 0.140 0.145 0.167 0.170 0.190 0.219 0.250 0.287

613606 613614 613622 613630 613649 613657 613665 613673 613681 613703 613711 613738 613746 613754 613762 613770 613789 613797 613800 613819

D19 5/16AF D19 11/32AF D19 3/8AF D19 13/32AF D19 7/16AF D19 1/2AF D19 9/16AF D19 19/32AF D19 5/8AF D19 11/16AF D19 3/4AF D19 25/32AF D19 13/16AF D19 7/8AF D19 15/16AF D19 1. AF D19 1.1/16AF D19 1.1/8AF D19 1.3/16AF D19 1.1/4AF

38.0 38.0 38.0 38.0 38.0 38.0 38.0 40.0 40.0 40.0 40.0 40.0 41.5 41.5 41.5 41.5 41.5 43.0 43.0 43.0

0.054 0.051 0.053 0.054 0.053 0.055 0.063 0.065 0.070 0.062 0.077 0.082 0.098 0.100 0.120 0.137 0.145 0.167 0.190 0.203

T T

19L (MM) / (AF) SOCKETS 1/2" hexagon, long pattern

bi-hexagon UD profile, long pattern

› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Chrome plated and polished.

Code 614017 614025 614033 614041 614068 614076

! 19L 13mm 19L 14mm 19L 17mm 19L 19mm 19L 21mm 19L 24mm

y 77 77 77 82 82 82

0 0.102 0.109 0.134 0.171 0.205 0.250

614130 614149 614157 614165 614173 614181 614203 614211

19L 1/2AF 19L 9/16AF 19L 5/8AF 19L 11/16AF 19L 3/4AF 19L 13/16AF 19L 7/8AF 19L 15/16AF

77 77 77 77 82 82 82 82

0.96 0.110 0.130 0.143 0.173 0.210 0.213 0.233

D19L (MM) SOCKETS 1/2"

Code 015705 015706 015701 015702 015707 015712 015703 015708 015704 015709 015713 015710 015711 015714 015715

! D19L 10mm D19L 12mm D19L 13mm D19L 14mm D19L 15mm D19L 16mm D19L 17mm D19L 18mm D19L 19mm D19L 21mm D19L 22mm D19L 24mm D19L 27mm D19L 30mm D19L 32mm

y 82 82 82 82 82 82 82 82 82 82 82 82 82 82 82

0 0.095 0.120 0.100 0.130 0.130 0.140 0.150 0.180 0.190 0.210 0.210 0.260 0.310 0.300 0.400

IN 19 (MM) / (AF) ALLEN KEY SOCKETS 1/2" for hexagon screws

› Manually operated sockets with knurled base. › For hexagon head screws. › 1/2” square drive. › Bits: Chrome Vanadium steel 59CrV4. › Sockets: Chrome Vanadium steel 31CrV3.

Code 615315 615323 615331 615358 615366 615374 615382 615390 615404 615412

! IN19 5mm IN19 6mm IN19 7mm IN19 8mm IN19 9mm IN19 10mm IN19 12mm IN19 14mm IN19 17mm IN19 19mm

y 60 60 60 60 60 60 60 60 60 60

0 0.050 0.055 0.058 0.060 0.063 0.065 0.075 0.085 0.115 0.120

Code 615471 615498 615501 615528 615536 615544 615552 615560 615579

! IN19 3/16AF IN19 7/32AF IN19 1/4AF IN19 9/32AF IN19 5/16AF IN19 3/8AF IN19 1/2AF IN19 9/16AF IN19 5/8AF

y 60 60 60 60 60 60 60 60 60

0 0.050 0.053 0.055 0.055 0.060 0.065 0.080 0.085 0.115

SOCKETS

INR 19 L SCREWDRIVER BIT SOCKETS 1/2"

IN 19 L ALLEN KEY SOCKETS 1/2"

for hexagon screws, long pattern

for multi-spline screws RIBE®, long pattern › Manually operated sockets with knurled base. › For hexagon head screws. › 1/2” square drive. › Bits: Chrome Vanadium steel 59CrV4. › Sockets: Chrome Vanadium steel 31CrV3.

› Manually operated sockets with knurled base. › For hexagon head screws. › 1/2” square drive. › Bits: Chrome Vanadium steel 59CrV4. › Sockets: Chrome Vanadium steel – 31CrV3.

RIBE® = Registered trademark of Richard Bergner, GmbH & Co. KG, Schwabach, Germany. Code 1449826 1449850 1449877 1449591 1398636 1449893

! INR 19L 5-100 INR 19L 6-100 INR 19L 8-100 INR 19L 10-100 INR 19L 12-100 INR 19L 14-100

y 100 100 100 100 100 100

INX 19-INX 19L SCREWDRIVER BIT SOCKETS 1/2"

0 0.085 0.085 0.085 0.105 0.145 0.155

Code 6162060 615730 6157570 615773 615811 615846 615862 616265 616303 616346 616370 616397

! IN19L 5-90 IN19L 6-100 IN19L 7-100 IN19L 8-100 IN19L 10-100 IN19L 12-100 IN19L 14-100 IN19L 1/4-100 IN19L 5/16-100 IN19L 3/8-100 IN19L 1/2-100 IN19L 9/16-100

y 90 100 100 100 100 100 100 100 100 100 100 100

ITX 19 TORX® BIT SOCKETS 1/2"

0 0.091 0.079 0.089 0.097 0.124 0.151 0.202 0.081 0.097 0.119 0.161 0.207

male TORX®

for multi-point screws XZN › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Manually operated sockets with knurled base. › Bits: Molybdenum tool steel.

› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Bits: Molybdenum tool steel.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

Code 615889 615900 615927 615943 615978 615919 615935 615951 615986 1888951

! INX19 5mm INX19 6mm INX19 8mm INX19 10mm INX19 12mm INX19L 6-100 INX19L 8-100 INX19L 10-100 INX19L 12-100 INX19L 14-100

+ M5 M6 M8 M10 M12 M6 M8 M10 M12 M14

y 55 55 55 55 55 100 100 100 100 100

0 0.068 0.076 0.077 0.094 0.110 0.093 0.097 0.124 0.149 0.110

Code 024710 024720 024730 024740 024750 024760 024770 024780 024790

! ITX19 T 20 ITX19 T 25 ITX19 T 27 ITX19 T 30 ITX19 T 40 ITX19 T 45 ITX19 T 50 ITX19 T 55 ITX19 T 60

T20 T25 T27 T30 T40 T45 T50 T55 T60

+ M4-M5 M4,5-M5 M4.5-M6 M6-M7 M7-M8 M8-M10 M10 M12 M14

3.86 4.43 4.99 5.52 6.65 7.82 8.83 11.22 13.25

y 55 55 55 55 55 55 55 55 55

0 0.068 0.070 0.070 0.070 0.075 0.070 0.075 0.100 0.110

T ITX 19 L TORX® BIT SOCKETS 1/2"

male TORX®, long pattern

IKS 19 SCREWDRIVER BIT SOCKETS 1/2"

for cross-head screws PH › Manually operated sockets with knurled base. › 1/2” square drive. › Chrome Vanadium steel 31CrV3. › Bits: Molybdenum tool steel.

› Manually operated sockets with knurled base. › 1/2” square drive. › Sockets: Chrome Vanadium steel 31CrV3. › Bits: Molybdenum tool steel. ® › Socket with Phillips & POZZIDRIV Bits

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

Code 024210 024215 024220 024225 024230 024235 024240 024245 024250 024253

! ITX19L T20 ITX19L T25 ITX19L T27 ITX19L T30 ITX19L T40 ITX19L T45 ITX19L T50 ITX19L T55 ITX19L T60 ITX19L T70

9 T20 T25 T27 T30 T40 T45 T50 T55 T60 T70

+ M4-M5 M4.5-M5 M4.5-M6 M6-M7 M7-M8 M8-M10 M10 M12 M14 M16

& y 0 3.86 100 0.095 4.43 100 0.095 4.99 100 0.096 5.52 100 0.096 6.65 100 0.096 7.82 100 0.098 8.83 100 0.124 11.22 100 0.151 13.25 100 0.197 15.55 100 0.277

ITX 19 B TORX® BIT SOCKETS 1/2"

Code 665665 665673 665711 665738

! IKS19 NO. 2 IKS19 NO. 3 IKS19 PZD 2 IKS19 PZD 3

y 60 60 60 60

TX 19 TORX® SOCKETS 1/2"

male TORX® head screws with pilot

female TORX®

› Manually operated sockets with knurled base. › Chrome Vanadium steel 31CrV3. › Bits: Molybdenum tool steel. › 1/2” square drive. › Tamper proof.

› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › 1/2” square drive. › Chrome plated.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

0 0.075 0.080 0.070 0.080

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

*WHILE STOCKS LAST

Code 6192720 6195660 6196390 6200170 6200410

! ITX19B T20* ITX19B T25* ITX19B T27* ITX19B T30 ITX19B T40

8 T20 T25 T27 T30 T40

+ M4-M5 M4,5-M5 M4,5-M6 M6-M7 M7-M8

3.86 4.43 4.99 5.52 6.65

y 55 55 55 55 55

0 0.075 0.075 0.076 0.076 0.091

Code 665908 665916 665924 665932 665940 665959 665967 665975

NO. TX19 E 10 TX19 E 11 TX19 E 12 TX19 E 14 TX19 E 16 TX19 E 18 TX19 E 20 TX19 E 24

9 E10 E11 E12 E14 E16 E18 E20 E24

+ M8 M10 M12 M12 M14 M6 M18-M20

9.42 10.08 11.17 12.90 14.76 16.70 18.45 22.16

y 38.0 38.0 38.0 38.0 38.0 40.0 40.0 41.5

0 0.055 0.055 0.055 0.055 0.060 0.080 0.085 0.115

SOCKETS

Accessories (1/2")

1985 SPEED BRACE HANDLE 1/2" › For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3.

Code 614335

No. 1985

a„ 1/2

a 12.5

y 420

0 0.585

1996 - 1997 SWIVEL HANDLES 1/2" 1996

› For manually operated sockets and accessories with 1/2” square drive. › Non-slip 2-component handle. › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3.

1997

Code 614483 614491 614556

No. 1996 1997/375 1997/450

a„ 1/2 1/2 1/2

a 12.5 12.5 12.5

y 255 375 450

0 0.414 0.576 0.677

1930 REDUCER 1/2" TO 3/8"

1932 CONVERTER 1/2" TO 3/4"

› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

1/2“ 12,5 mm

Code No. 6143000 1930

„ Q 1/2

Q 12,5

„ a 3/8

a 10

y 39

0 0.062

3/4“ 20 mm

1/2“ 12,5 mm

3/8“ 10 mm

Code 614319

No. 1932

a 3/4

„ 20

Q 1/2

„

Q 12.5

y 45

0 0.124

T 1990 EXTENSION BARS 1/2"

1990-75

› For manually operated sockets and accessories

1990-125

› ›

with 1/2” square drive. Chrome Vanadium steel 31CrV3. In accordance with SANS 1113 and DIN 3123.

1990-175

Code 614378 614386 614289 614394

1990-250

No. 1990/75 1990/125 1990/175 1990/250

a„ 1/2 1/2 1/2 1/2

1995 UNIVERSAL JOINT 1/2"

a 12.5 12.5 12.5 12.5

y 75 125 175 250

0 0.109 0.177 0.239 0.337

1990 M EXTENSION 1/2" with magnet

› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

› For manually operated sockets and accessories with 1/2” square drive and ball locking device. › Strong magnet securely fixes even large screws in the socket. › Makes work easier particularly in confined spaces. › One-hand operation. › Chrome Vanadium steel 31CrV3. › In accordance with DIN 3120. › Hot forged.

*WHILE STOCKS LAST Code 614475

No. 1995

„

a 1/2

a 12.5

Q 1/2

„

Q y 12.5 70

0 0.149

Code No. 2697920 1990M *

„ a 1/2

a 12.5

1987 SLIDING T-BAR 1/2"

1994 COUPLERS 1/2"

› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3.

› For manually operated sockets and accessories with 1/2” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

y 83

0 0.110

y 37 46

0 0.042 0.056

*WITH MUSHROOM HEAD

Code 614343

No. 1987

„ a 1/2

a 12.5

y 290

0 0.350

Code No. 6144670 1994 Coupler 614467 1994 PZK*

„ a 1/2 1/2

a 12.5 12.5

SOCKETS

(3/4") Square Drive Sets (3/4")

e !

32 EMAZ/ EMZ / EAZ SOCKET SETS 3/4" › Manually operated 3/4” sockets and accessories. › Supplied in blue powder coated D32 E steel box. › Dimensions: 526x190x75mm.

Code 626538

No. C32 EMAZ

Ratchet ! 3293 Z-94

Sockets C32 27-1.1/16 29-1.1/8 32-1.1/4 33-1.5/16 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2. 1.3/8

Accessories + 3287 3290-200 3290-400

0 11.430

628026

D32 EMZ

! 3293 Z-94

D32 22 24 27 30 32 36 38 41 46 50

+ 3287 3290-200 3290-400

11.060

628050

D32 EAZ

! 3293 Z-94

D32 7/8 15/16 1.1/16 1.1/4 1.5/16 1.3/8 1.7/16 1.5/8 1.13/16 2.

+ 3287 3290-200 3290-400

11.220

e !

32 EMAU-2 / EMU-2 SOCKET SETS 3/4" › Manually operated 3/4” sockets and accessories. › Supplied in blue powder coated D32 E steel box. › Dimensions: 526x190x75mm.

*WHILE STOCKS LAST Code 626546

No. C32 EMAU-2

Ratchet " 3293 U-2

Sockets C32 27-1.1/16 29-1.1/8 32-1.1/4 33-1.5/16 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2. 1.3/8

Accessories + 3287 3290-200 3290-400

0 11.600

628042

D32 EMU-2

" 3293 U-2

D32 22 24 27 30 32 36 38 41 46 50

11.230

628069

D32 EAU-2 *

" 3293 U-2

D32 7/8 15/16 1.1/16 1.1/4 1.5/16 1.3/8 1.7/16 1.5/8 1.13/16 2.

+ 3287 3290-200 3290-400 + 3287 3290-200 3290-400

11.400

NEW

D32 NZU-Z SOCKET SET 3/4" › Manually operated 3/4” sockets and accessories. › Supplied in blue powder coated steel box. › Sturdy carrying handles.

Code Reversible Ratchet 628073 " 3293 U-2

Sockets D32 22 24 27 29 30 32 36 38 41 46 50mm 7/8 15/16 1.1/16 1.1/4 1.5/16 1.3/8 1.7/16 1.5/8 1.13/16 2

Accessories + 3287 3290-200 3290-400

0 14.100

Ratchets (3/4")

3293 U-1 REVERSIBLE RATCHETS WITH LEVER CONTROL 3/4" › For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122. › With lever control and detachable handle.

Code 627798 627984

No. 3293 U-1 3293 U-1/440

a„ 3/4 3/4

A° 11,25 11,25

a 20 20

y 500 440

3293 Z-94 RATCHET HANDLE WITH COUPLER 3/4"

3293 U-2 REVERSIBLE RATCHET 3/4"

› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

Code No. 627895 3293 Z-94

a„ 3/4

a 20

A° 10

y 500

0 1.300

Code 627860

No. 3293 U-2

a„ 3/4

a 20

A° 7,2

y 500

0 2.590 2.380

0 1.470

SOCKETS

3293/500 DJ/DJ 24X34 DOUBLE JOHNNY RATCHETS 3/4" › For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122. › 500 DJ with double 3/4” drive coupler and 500mm detachable handle. › 500 DJ24x30 with 24mm and 30mm fixed sockets and 500mm detachable handle.

3293/500

3293/500-24x30

Code 627127 627194

No. 3293/500 3293/500 24x30

a„ 3/4 3/4

A° 15 15

a 20 20

y 625 650

0 3.080 2.940

Sockets (3/4")

C 32 (MM) / (AF) SOCKETS 3/4"

D 32 (MM) / (AF) SOCKETS 3/4“

C profile

bi-hexagon UD profile

› Manually operated sockets with thin walls and knurled base. › Chrome Vanadium steel 31CrV3. › Chrome plated. › In accordance with SANS 1113 and DIN 3124.

Code 626007 626015 626023 626058 626066 626074 626082 626090 626104 626112 626171 626201 626228 626244 626260

! C32 19mm-3/4 C32 22mm-7/8 C32 24mm-15/16 C32 26 mm-1. C32 27mm-1.1/16 C32 29mm-1.1/8 C32 30mm-1.3/16 C32 32mm-1.1/4 C32 33mm-1.5/16 C32 34mm C32 36mm-1.7/16 C32 38mm-1.1/2 C32 41mm-1.5/8 C32 46mm-1.13/16 C32 50mm-2.

626279 C32 1.3/8AF

K32 3/4“ IMPACT SOCKETS

y 51.5 51.5 51.5 51.5 54.5 54.5 57.5 57.5 57.5 57.5 59.5 59.5 62.5 65.5 68.5

0 0.208 0.211 0.221 0.220 0.243 0.261 0.303 0.343 0.350 0.380 0.413 0.440 0.550 0.690 0.840

59.5

0.402

Code 627216 627224 627232 627240 627259 627267 627275 627704 627763 627283 627291 627305 627313 627321

! D32 19mm D32 22mm D32 24mm D32 27mm D32 29mm D32 30mm D32 32mm D32 33mm D32 34mm D32 36mm D32 38mm D32 41mm D32 46mm D32 50mm

627402 627410 627429 627437 627445 627399 627453 627461 627488 627496 627518 627526 627534 627542 627550 627569 627577

D32 D32 D32 D32 D32 D32 D32 D32 D32 D32 D32 D32 D32 D32 D32 D32 D32

7/8AF 15/16AF 1. AF 1.1/16AF 1.1/8AF 1.3/16AF 1.1/4AF 1.5/16AF 1.3/8AF 1.7/16AF 1.1/2AF 1.5/8AF 1.11/16AF 1.3/4AF 1.13/16AF 1.7/8AF 2.AF

y 51.5 51.5 51.5 54.5 54.5 57.5 57.5 57.5 57.5 59.5 59.5 62.5 65.5 68.5

0 0.208 0.211 0.221 0.243 0.261 0.303 0.343 0.350 0.380 0.413 0.439 0.551 0.690 0.780

51.5 51.5 51.5 54.5 54.5 58.0 57.5 57.5 59.5 59.5 59.5 62.5 62.5 65.5 65.5 65.5 68.5

0.212 0.222 0.220 0.250 0.240 0.306 0.331 0.370 0.402 0.440 0.435 0.551 0.600 0.550 0.690 0.765 0.840

U IN 32 SCREWDRIVER BIT SOCKETS 3/4"

U IN32 14mm

for hexagon head screws › Manually operated sockets with knurled base. › 3/4” square drive. › Sockets: Chrome Vanadium steel 31CrV3. › Bits: Chrome Vanadium steel 59CrV4.

Code No. 6275850 IN32 14mm 6275930 IN32 17mm

IN32 22mm

$ 14 17

y 80 80

Code No. 6276070 IN32 19mm 6276150 IN32 22mm

0 0.352 0.394

$ 19 22

y 80 80

0 0.433 0.482

Accessories (3/4")

3296 SWIVEL HANDLE 3/4" › For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122. Code 627925

No. 3296

a„ 3/4

a 20

y 547

0 1.900

a„ 3/4 3/4

a 20 20

y 500 447

0 0.118 0.107

y 200 400

0 0.555 1.058

3287 SLIDING T BARS 3/4" › For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122. Code 627836 627941

No. 3287 3287/447

3290 EXTENSIONS 3/4"

3290-200

› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

Code 627844 627852

No. 3290/200 3290/400

a„ 3/4 3/4

a 20 20

SOCKETS

3219 REDUCER 3/4" TO 1/2"

3221 CONVERTER 3/4" TO 1"

› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

3/4“ 20 mm

Code 017100

„ a 1/2

No. 3219

a 12,5

„ Q 3/4

Q 20

y 56

0 0.160

Code 627828

No. 3221

a 1

„

a 25

Q 3/4

3295 UNIVERSAL JOINT 3/4"

3294 COUPLER 3/4"

› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

› For manually operated sockets and accessories with 3/4” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

Code 017170

„ a 3/4

No. 3295

a 20

„ Q 3/4

Q 20

y 105

0 0.580

Code 627909

No. 3294

a 3/4

SPARES 32 REPAIR KITS

19 BOXES & INSERTS

› For the 3293 range of ratchets and 3296 power bar.

› Blue powder coated steel case. › Black matt-finish insert.

Code 541036 545716 545724 627135 545740

1“ 25 mm

3/4“ 20 mm

1/2“ 12,5 mm

No.

Code

No.

3293 U-I Repair Kit 3293 U-2 Repair Kit 3293 Z Repair Kit 3293 DJ Repair Kit 3296 Repair Kit

514683 544256 545228

D32 E Box D32 Insert C32 EMAZ Insert

„

a 20

„

Q 20

y 60

0 0.338

y 52

0 0.133

(1") Square Drive Sets (1")

D 21 EMU-10 SOCKET SET 1"

f !

15 pieces › Manually operated 1” sockets and accessories. › Gedore Vanadium steel 31CrV3. › With reversible lever change ratchet. › Supplied in blue powder coated steel case. › Dimensions: 760 x 160 x 105mm. Code 018250

No. D 21 EMU JG

Ratchet $ 2193 U-3

Sockets 3 D 21 36 41 46 50 55 60 65 70 75 80

Accessories 2190 -16 Extension 2190 -8 Extension + 2187 Sliding T-Bar

0 27.600

2193 U-3 REVERSIBLE RATCHET 1" › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, fine-toothed (72 teeth) and robust.

› Return angle 5 degrees. › Push-fit tube handle. › For manually operated sockets and accessories with 1” square drive.

Code 018240

No. 2193 U-3

a„ 1

A° 5

a 25

y 720

0 4.500

2193 Z-94 RATCHET HANDLE WITH COUPLER 1" › In accordance with SANS 1113 and DIN 3122. › Chrome Vanadium steel 31CrV3. › With non-slip metal disc change, fine-toothed (72 teeth) and robust.

› Return angle of nine degrees. › Push-fit tube handle. › For manually operated sockets and accessories with 1” square drive.

Code 6181520

No. 2193 Z-94

a„ 1

a 25

A° 9

y 720

0 4.200

SOCKETS

Sockets (1")

D 21/21 (MM) SOCKETS 1"

C profile › Manually operated sockets with knurled base. › 1” square drive. › Gedore Vanadium steel 31CrV3. › Chrome plated. › In accordance with SANS 1113 and DIN 3124.

70-80mm

36-65mm

Code 018001 018002 018003 018004 018005

! D21 36mm D21 41mm D21 46mm D21 50mm D21 55mm

y 70 70 75 75 75

0 0.600 0.700 0.900 1.000 1.100

Code 018006 018011 018008 018009 018010

! D21 60mm D21 65mm 21 70mm - Hexagon 21 75mm - Hexagon 21 80mm - Hexagon

y 80 84 70 70 75

0 1.200 1.670 0.600 0.700 0.900

Accessories (1")

2187 SLIDING T-BAR 1" › For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

Code 018210

No. 2187

1“ IMPACT ACCESSORIES

a 1

1“ IMPACT SOCKET SET

„

a 25

y 640

0 3.100

V 2190 EXTENSIONS 1" › For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

2190-8

2190-16

Code 018220 018230

No. 2190-8“ 2190-16“

a„ 1 1

a 25 25

y 200 400

0 1.100 1.900

2132 REDUCER 1" TO 3/4" › For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123. 1“ 25 mm

Code 018200

„ a 3/4

No. 2132

a 25

Q 1

„

Q 20

3/4“ 20 mm

y 75

2194 COUPLER 1"

2195 UNIVERSAL JOINT 1"

› For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3122.

› For manually operated sockets and accessories with 1” square drive. › Chrome Vanadium steel 31CrV3. › In accordance with SANS 1113 and DIN 3123.

Code No. 6180710 2194

a 1

„

a 25

y 68

0 0.321

Code No. 6180980 2195

a 1

„

a 25

Q 1

„

0 0.500

Q 25

y 140

0 1.480

IMPACT SOCKETS 50 - 59

IMPACT SOCKETS, SETS ACCESSORIES

(1/2”) SOCKETS 53

(1/2”) SETS 52

(1/2”) ACCESSORIES 53

(3/4”) SOCKETS 55

(3/4”) ACCESSORIES 56

(1”) SOCKETS 57

(1”) ACCESSORIES 58

(1.1/2”) SOCKETS 59

(1.1/2”) ACCESSORIES 59

IMPACT TOOLS

Impact Tools (1/2") square drive

K19-14 IMPACT SOCKET SET 1/2"

NEW

K19-17 IMPACT SOCKET SET 1/2" › 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated. › Supplied in blue powder coated steel box.

› 14 impact sockets, suitable for all standard electric and air tools. › 1/2” square drive. › Supplied in blue powder coated steel box.

Code No. Sockets 1646928 K19-14 1 K19 10 11 12 13 14 16 17 18 19 21 22 23 24 27

K 19-5 IMPACT SOCKET SET 1/2"

Code No. 1646930 K19-17

Sockets Extension KB1990-125 1 K19 10 11 12 13 14 16 17 18 19 KB1970/75 8-14mm safety ring & pin KB1970/75 15-32mm safety ring & pin 21 22 23 24 27

K 1900 IMPACT DRIVER SETS 1/2"

› 5 impact sockets, machine-operated, suitable for all standard electric and air tools. › 1/2” square drive. › Supplied in blue powder coated D19 steel box. › Dimensions: 281x77x46mm.

› For use on screws and bolts with slotted, cross-slotted or hexagon heads. › Supplied in blue sheetmetal case with black plastic insert. › Dimensions: 281x79x42mm.

*WHILE STOCKS LAST

Code No. 1646923 K19-5

Sockets 1 K19 10 13 14 17 24

Extension KB1990-125

0 0.95

Code 025490

025491

NEW

No. Sockets 4 6 7 8 K1900-613 1 2 3 2,5 3 4 5 K1900-813 7 8 9 12 2 3 4 5 6 8 10

R T

Accessories K1900

0 1.22

K1900

1.22

T K 19 (MM) IMPACT SOCKETS 1/2"

K 19 L IMPACT SOCKETS 1/2"

hexagon

hexagon, long pattern

› 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated.

› 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated.

Code

Recommended Accessories

6160280 6160360 6160440 6160520 6160600 6160790 6160870 6160950 6161090 6161170 6161250 6161330 6161410 6182680 6182720 6182880 1560557 1783742

K19 10mm K19 11mm K19 12mm K19 13mm K19 14mm K19 16mm K19 17mm K19 18mm K19 19mm K19 21mm K19 22mm K19 23mm K19 24mm K19 27mm K19 28mm K19 29mm K19 30mm K19 32mm

KB1970 10-14, KB1975 10-14 KB1970 10-14, KB1975 10-14 KB1970 10-14, KB1975 10-14 KB1970 10-14, KB1975 10-14 KB1970 10-14, KB1975 10-14 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27

Code

Recommended Accessories

38 38 38 38 38 38 38 38 38 38 38 38 45 50 50 50 50 50

0.082 0.085 0.084 0.081 0.082 0.124 0.123 0.122 0.119 0.137 0.142 0.148 0.154 0.180 0.183 0.188 0.256 0.286

6163380 6163381 6163400 6163540 6163620 6197790 6163890 6197870 6164000 6162730 6164270 6199810 6164430 6164780 6184270

K19L 10mm K19L 11mm K19L 12mm K19L 13mm K19L 14mm K19L 16mm K19L 17mm K19L 18mm K19L 19mm K19L 21mm K19L 22mm K19L 23mm K19L 24mm K19L 27mm K19L 30mm

IN K 19 IMPACT ALLEN KEY SOCKETS 1/2"

77 77 77 77 77 77 80 82 82 82 82 82 82 82 82

0.140 0.133 0.140 0.150 0.154 0.172 0.200 0.215 0.225 0.243 0.290 0.292 0.314 0.389 0.453

KB 1932 CONVERTER 1/2" TO 3/4" for impact sockets

for in-hex screws › With square drive as per DIN 3121.

› 1/2“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3121. › GEDORE special steel, manganese phosphated.

Code

Recommended Accessories

6224190 6224270 6224350 6225320 6225670 6225675

IN K19 8mm IN K19 10mm IN K19 12mm IN K19 14mm IN K19 17mm IN K19 19mm

KB1970 10-14, KB1975 10-14 KB1970 10-14, KB1975 10-14 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27 KB1970 15-27, KB1975 15-27

1/2“ 12,5 mm

44 44 50 50 50 50

0.093 0.104 0.130 0.148 0.189 0.214

Code No. 6650020 KB1932

„ a 3/4

a 20

Q 1/2

„

Q y 12.5 48

3/4“ 20 mm

0 0.159

IMPACT TOOLS

KB 1990 EXTENSIONS 1/2"

KB 1995 UNIVERSAL JOINT 1/2"

for impact sockets

› For impact sockets and accessories with 1/2” square drive.

› For air tool operated impact sockets and accessories with 1/2” square drive.

Code No. 6655100 KB1990/75 6655250 KB1990/125

a„ a 1/2 12.5 1/2 12.5

y 75 125

0 0.143 0.226

KB 1900 IMPACT DRIVER 1/2"

No.

„ a 1/2

a 12.5

Q 1/2

„

Q y 12.5 62

0 0.202

KB 1970 - KB 1975 SAFETY RING AND PIN for impact sockets 1/2"

› For impact sockets and accessories with 1/2” square drive.

Code

Code No. 6655410 KB1995

123

0.580

024010 KB1900

Code No. 6654790 KB1970/75 8-14mm 6654870 KB1970/75 15-32mm

0 2 2

(3/4") square drive

K32-18 IMPACT SOCKET SET 3/4" › 3/4“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated. › Supplied in blue powder coated steel box.

Code No. 6289995 K32-18

Sockets 1 K32 17 18 19 21 22 23 24 27 28 29 30 32 33 34 36 38 40 41

Extension 0 KB3270/75 17-50mm safety ring & pin KB3270/75 52-60mm safety ring & pin

NEW

U K 32 (MM) IMPACT SOCKETS 3/4"

hexagon › 3/4“ square drive. › Machine-operated, suitable for all standard electric and air tools. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated.

Code

Recommended Accessories

6282040 6289990 6282120 6282190 6282200 6282210 6282390 6282470 6282474 6282476 6282550 6282630 6283010

K32 17mm K32 18mm K32 19mm K32 21mm K32 22mm K32 23mm K32 24mm K32 27mm K32 28mm K32 29mm K32 30mm K32 32mm K32 33mm

KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275

Code

Recommended Accessories

45 45 45 46 46 46 46 48 48 48 52 52 55

0.330 0.330 0.331 0.340 0.333 0.360 0.349 0.367 0.379 0.384 0.395 0.445 0.475

6281580 6282710 6281740 6282970 6282980 6282982 6282984 6282986 6282988 6282990 6282992 6282994 6282996 6282998

K32 34mm K32 36mm K32 38mm K32 40mm K32 41mm K32 42mm K32 44mm K32 46mm K32 47mm K32 48mm K32 50mm K32 55mm K32 60mm K32 65mm

KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275

K 32 L IMPACT SOCKETS 3/4"

55 56 59 59 59 58 62 62 68 68 68 72 75 78

0.475 0.482 0.517 0.560 0.561 0.582 0.697 0.703 0.810 0.827 0.831 1.149 1.500 1.800

INK32 IMPACT ALLEN KEY SOCKETS 3/4"

hexagon, long pattern

for in-hex screws › Machine-operated, suitable for all standard electric and air tools. › With square drive as per DIN 3121.

› 3/4” square drive. › With square drive as per DIN 3129.

Code

Recommended Accessories

6283600 6283790 6283870 6283950 6284090 6284170 6284250 6286540 6281660 6284330 6284332 6286890 6284336

K32L 17mm K32L 19mm K32L 22mm K32L 24mm K32L 27mm K32L 30mm K32L 32mm K32L 33mm K32L 34mm K32L 36mm K32L 38mm K32L 41mm K32L 46mm

KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275

90 90 90 90 90 90 90 90 90 90 90 90 90

0.490 0.510 0.560 0.580 0.630 0.700 0.740 0.770 0.800 0.850 0.880 0.950 1.080

Code 1956477 1956485 1956493 1956507 1956515

! INK32 14mm INK32 17mm INK32 19mm INK32 22mm INK32 24mm

Recommended Accessories KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275 KB3270, KB3275

y 59 62 64 67 67

0 0.408 0.445 0.467 0.520 0.555

IMPACT TOOLS

KB 3221 CONVERTER 3/4" TO 1"

KB 3219 REDUCER 3/4" TO 1/2"

for impact sockets

› With square drive as per DIN 3121.

› With square drive as per DIN 3121. › GEDORE special steel, manganese-phosphated.

3/4“ 20 mm

Code No. 6675280 KB3219

a 1

„

a 25

Q 3/4

„

a 12,5

Q 3/4

„

Q 20

y 65

0 0.351

Q 20

y 94

0 0.623

1“ 25 mm

3/4“ 20 mm

Code No. 6671530 KB3221

„ a 1/2“

1/2“ 12,5 mm

Q 20

y 65

0 0.445

KB 3295 UNIVERSAL JOINT 3/4" for impact sockets › For impact sockets and accessories with 3/4” square drive.

KB 3290 EXTENSIONS 3/4" for impact sockets › For impact sockets and accessories with 3/4” square drive. Code No. 6676090 KB3295

„ a 3/4“

a 20

Q 3/4

„

KB 3270 - KB 3275 SAFETY RING AND PIN for impact sockets 3/4"

KB 3290-175

Code 6675550 6675650 6675790

No. KB3290/175 KB3290/250 KB3290/12“

KB 3290-300

KB 3290-250

a„ 3/4 3/4 3/4

a 20 20 20

y 175 250 300

0 0.887 0.917 1.300

Code

No.

6675441 KB3270/75 17-50mm 6675444 KB3270/75 52-60mm

0 0.02 0.02

V (1") square drive

NEW

K21-21 IMPACT SOCKET SET 1" › 1“ square drive. › In accordance with DIN 3129. › GEDORE special steel, manganese phosphated. › Supplied in blue powder coated steel box.

Code No. 6186259 K21-21

Sockets 1 K21 32 33 34 42 46 47 55 60 65

27 29 30 36 38 41 48 50 52 70 75 80

* Picture for illustration purposes only. Contents/accessories may differ.

Extension 0 KB2190-175 KB2190-250 KB2170/75 19-70mm safety ring & pin KB2170/75 71-90mm safety ring & pin

K 21 (MM) IMPACT SOCKETS 1" hexagon

hexagon, long pattern

› 1“ square drive. › In accordance with DIN 3129.

› 1“ square drive. › In accordance with DIN 3121.

Code

Recommended Accessories

6183060 6183140 6183220 6183290 6183300 6183490 6183650 6196980 6183570 6184890 6183730 6184970 6183810 6183820 6183822 6184030 6184034 6184110 6184380 6184460 6184540 6184620 6184700 6184710 6184720 6184725 6184730 6184735

K21 22mm K21 24mm K21 27mm K21 29mm K21 30mm K21 32mm K21 33mm K21 34mm K21 36mm K21 38mm K21 41mm K21 42mm K21 46mm K21 47mm K21 48mm K21 50mm K21 52mm K21 55mm K21 60mm K21 65mm K21 70mm K21 75mm K21 80mm K21 85mm K21 90mm K21 95mm K21 100mm K21 105mm

KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175

K 21 L IMPACT SOCKETS 1"

Code

Recommended Accessories

55 55 55 56 57 57 57 60 60 62 64 64 69 70 71 73 74 76 82 85 88 92 97 106 108 108 115 120

0.546 0.561 0. 593 0. 643 0. 636 0. 649 1.001 0. 733 0. 781 0. 858 0. 830 0. 900 1.054 1.120 1.200 1.305 1.300 1.533 1.821 2.040 2.479 3.022 2.890 3.852 3.730 4.830 5.625 6.620

6185350 6185430 6185510 6185780 6185860 6197950 6197010 6185940 6186080 6186160 6186240 6186242 6186244 6186246 6186248 6186250 6186252

K2L 22mm K2L 24mm K2L 27mm K2L 30mm K2L 32mm K2L 33mm K2L 34mm K2L 36mm K2L 38mm K2L 41mm K2L 46mm K2L 50mm K2L 55mm K2L 60mm K2L 65mm K2L 70mm K2L 75mm

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

0.934 0.958 1.007 1.076 1.135 1.123 1.169 1.221 1.325 1.393 1.621 1.947 2.100 2.253 2.723 3.005 3.303

IMPACT TOOLS

INK21 IMPACT ALLEN KEY SOCKETS 1"

KB 2132 REDUCER 1" TO 3/4"

for in-hex screws

for impact sockets

› For all standard electric and air tools. › With square drive as per DIN 3121.

› With square drive as per DIN 3121.

Code

Recommended Accessories

1956548 1956558 1956566 1956574 1956582

INK21 17mm INK21 19mm INK21 22mm INK21 24mm INK21 27mm

KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175 KB 2170, KB 2175

75 75 75 75 75

0.800 0.825 0.845 0.888 0.938

Code No. 6657460 KB2132

„ a 3/4“

a 20

Q 1

„

KB 2137 CONVERTER 1" TO 1.1/2"

KB 2170 - KB 2175 SAFETY RING AND PIN

for impact sockets

for impact sockets 1"

Q 25

y 77

0 0.661

› With square drive as per DIN 3121.

Code No. 6657890 KB2137

„ a 1.1/2“

a 40

Q 1

„

Q 25

y 85

0 0.988

Price 101.70

Code

No.

0 0.02 0.02

6657621 KB2170/75 19-70mm 6657623 KB2170/75 71-90mm

KB 2190 EXTENSIONS 1"

KB 2195 UNIVERSAL JOINT 1"

for impact sockets

› For impact sockets and accessories with 1” square drive.

Code 6657969 6657975 6658000

No. KB2190/175 KB2190/250 KB2190/330

a„ 1 1 1

a 25 25 25

y 200 300 400

0 1.57 1.75 2.35

Code No. 6658350 KB2195

„ a 1“

a 25

Q 1

„

Q 25

y 0 136 1.42

W (1.1/2") square drive

K 37 IMPACT SOCKETS 1.1/2"

KB 3790 EXTENSIONS 1.1/2“

hexagon

for impact sockets

› 1.1/2” square drive. › In accordance with DIN 3129.

› For impact sockets and accessories with 1.1/2” square drive.

Code 6328130 6328210 6328220 6328230 6328480 6328560 6328640 6328720 6328800 6328990 6329020 6329100 6329290 6329370 6329450 6329530 6329610

!. K37 46mm K37 50mm K37 52mm K37 54mm K37 55mm K37 60mm K37 65mm K37 70mm K37 75mm K37 80mm K37 85mm K37 90mm K37 95mm K37 100mm K37 105mm K37 110mm K37 115mm

Recommended Accessories

y 80 82 85 85 89 92 96 101 105 110 116 118 118 125 125 137 137

KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775 KB 3770, KB 3775

0 2.260 2.386 2.420 2.450 2.500 2.731 2.901 3.466 3.713 4.252 5.332 5.658 6.372 6.543 7.537 7.959 8.833

KB 3290-175

Code 6329885 6329888 6329890

KB 3290-250

No. KB3790/175 KB3790/250 KB3790/330

a„ 1.1/2 1.1/2 1.1/2

KB 3290-330

a 40 40 40

KB 3721 REDUCER 1.1/2" TO 1"

KB 3770 - KB 3775 SAFETY RING AND PIN

for impact sockets

for impact sockets 1.1/2"

y 175 250 330

0 4.08 5.20 6.38

› With square drive as per DIN 3121.

Code No. 6676410 KB3721

a 1

„

a 25

„ Q 1.1/2

Q 40

y 0 95 2.58

Code No. 6676762 KB3770/75 46-90mm 6676764 KB3770/75 95-115mm

0 0.02 0.02

SCREWDRIVERS 60 - 71

SCREWDRIVERS

2150 3C SCREWDRIVERS 63

2160PH 3C SCREWDRIVERS 63

SCREWDRIVER SETS 65

NUT DRIVERS 67

NUT DRIVER SETS 67

ALLEN KEYS 68

ALLEN KEY SETS 68

TORXÂ® KEYS 70

SCREWDRIVER BITS 71

SCREWDRIVER

3C SCREWDRIVER PERFECT POWER TRANSMISSION

powerful - unerring - absolute precision - wear-resistant ... perfect power transmission included

That is what the new series Power-Grip3 That is what screwdrivers the new series Power-Grip screwdrivers from GEDORE are from3GEDORE areâ&#x20AC;Ś â&#x20AC;Ś the reliable all-rounders for all work in wood, plastic and metal reliable all-rounders for all work on all materials.

Head marking for specifically and rapidly

Head marking specifi cally and accessing the for right screwdriver rapidly accessing the right screwdriver

Useful hanging hole

Useful hanging hole. T

Ergonomic grip design for optimum power

transfergrip design for optimum power transfer. Ergonomic T Maximum force involving minimum effort Maximum force involving minimum effort. T Extensive contact surface with the hand Extensive contact surface with the hand. T Ergonomically appropriately placed hard and Ergonomically placed anditssoftGEDORE elements give the soft elements give hard the grip typical feel feeling. gripkind-to-hands its kind-to-hands T Suitable for small hands, large hands and for Suitable for all size hands, both right and left-handers.

Seized screws are loosened by gently knocking screws areblade loosened by on the striking Seized cap. Full-length transfers gently knocking on the striking the full 100 % impact force onto the blade tip.

cap. Full-length blade transfers the full 100% impact force onto the blade tip.

both right and left-handers

Blade injected as a positive fit into the plastic core and matt chrome-plated

Soft fast turning zone with hard T Soft fast turning zone with hard power point power point gets the power there - gets the power there quickly quickly. Power point ensures T Power point also ensures that thealso forefinger thatthetheblade forefinger reliably reliably guides guides the blade.

The hard core is inside the grip. It takes up the force The hard core is inside the grip.and It takes the from the external components easilyuptransfers force from the external components and easily it to the shaft. The hard core can be seen at the head transfers it to the shaft. The hard core can be seen marking. at the head marking

The torque required by the German Standards Institute (DIN/ISO) is exceeded considerably The ideal all-rounder for screws in wood, plastic and metal

Blade fully fully tempered tempered for for aa long long service service life. life Blade Blade from from Gedore GEDOREVanadium molybdenum-vanadium-Plus Made Molybdenum plus tempered steel for hardness, elasticity and resistance tempered steel for hardness, elasticity and resistance to wear to wear.

GEDORE has two different blade types for slotted head screws: Workshop tip = wedge-shaped blade in acc. with DIN ISO 2380-1 Form-A Workshop tip for all types of bolting work. Screwdriver tip is wedge-shaped Little parallel surface of nominal thickness DIN ISO 2380-1 Form-A

POWER-GRIP

Form A

Precision-made blade tip ensures optimum power transfer onto the screw head.

Electrician tip = slender, parallel blade in acc. with DIN ISO 2380-1 Form-B Electrician tip specially for screws deep down in the screw shaft e.g. with wire connectors and sockets. Extensive parallel surface of nominal thickness, no wedge-shape 62 DIN ISO 2380-1 Form-B

Precision-made blade tip ensures optimum power transfer onto the screw head

Form A

Form B

3C-Screwdrivers

2150 3C SCREWDRIVERS for slotted-head screws, special lengths › According to DIN ISO 2380-2. › Blade tip according to DIN ISO 2380-1 Form A. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from Gedore Molybdenum-Vanadium-plus tempered steel.

Code 6679270 6679350 6679430 6679510 6679780 6679860

No. 2150 2150 2150 2150 2150 2150

3 4 5.5 6.5 8 10

M 80 100 100 150 150 200

?K L N 3.0 0.5 165 4.0 0.8 185 5.5 1.0 200 6.5 1.2 260 8.0 1.2 270 10.0 1.6 320

Ø 3.0 4.0 5.0 6.0 7.0 8.0

0 0.039 0.061 0.093 0.128 0.170 0.203

Code 2822709 6680280 6680360 6680520 6680870

No. 2150-2.5-75 2150 3-150 2150 4-150 2150 5.5-150 2150 6.5-200

M 75 150 150 150 200

?K L N 2.5 0.4 160 3.0 0.5 235 4.0 0.8 235 5.5 1.0 250 6.5 1.2 310

2160 PH 3C SCREWDRIVERS

2160 PZ 3C SCREWDRIVERS

for cross-head screws PH

for cross-head screws Pozi PZ

› According to DIN ISO 8764. › Tip according to DIN ISO 8764-1 PH. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Size 3 blade with hexagon bolster. › Blade from Gedore Molybdenum-Vanadium-plus tempered steel.

› Acc. to DIN ISO 8764, tip acc. to DIN ISO 8764-1 PZ. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Size 3 blade with hexagon bolster. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.

Code 6683110 6683380 6683460 6683540

No. 2160 PH 0 2160 PH 1 2160 PH 2 2160 PH 3

+ N M1,6-M2 145 M2-M3 200 M3,5-M5 210 M5,5-M7 270

; PH 0 1 2 3

0 0.032 0.080 0.119 0.192

Code 6683970 6684000 6684190 6684270

No. 2160 PZ 0 2160 PZ 1 2160 PZ 2 2160 PZ 3

+ N M1,6-M2 145 M2-M3 180 M3,5-M5 210 M5,5-M7 270

Ø 2.5 3.0 4.0 5.5 6.0

0 0.055 0.044 0.069 0.104 0.152

< PZ 0 1 2 3

0 0.038 0.080 0.119 0.189

SCREWDRIVER

2153 3C SCREWDRIVER

2161 PH 3C SCREWDRIVER

for slotted-head screws, stubby

for cross-head screws PH, stubby

› Acc. to DIN ISO 2380-2A, blade tip acc. to DIN ISO 2380-1 Form B. › For confined spaces. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.

› Acc. to DIN ISO 8764, tip acc. to DIN ISO 8764-1 PH. › For confined spaces. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.

Code No. 1482432 2153-5.5

?K 5.5

L 1.0

N 81

Code No. 1531204 2161 PH 2

0 0.036

+ M3,5 - M5

N 81

0 0.036

2163 TX 3C SCREWDRIVERS for recessed TORX® head screws › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel. › TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA.

Code 6685400 6685590 6685670 6685750 6685830 6685910

No. 2163 TX T6 2163 TX T7 2163 TX T8 2163 TX T9 2163 TX T10 2163 TX T15

cha

nic

’s

7 T6 T7 T8 T9 T10 T15

+ M2 M2,5 M2,5 M3 M3 - M3,5 M3,5 - M4

Ele ct

& 1,69 1,99 2,31 2,50 2,74 3,27

rici

an’s

N 145 145 145 145 165 165

Code 6686050 6686130 6686210 6686480 6686560 6686640

0 0.029 0.038 0.038 0.038 0.039 0.054

Phi

llip

No. 2163 TX T20 2163 TX T25 2163 TX T27 2163 TX T30 2163 TX T40 2163 TX T45

7 T20 T25 T27 T30 T40 T45

POZ

+ M4 - M5 M4,5 - M5 M4,5 - M6 M6 - M7 M7 - M8 M8 - M10

IDR

IV ®

& 3,86 4,43 4,99 5,52 6,65 7,82

N 185 200 215 225 240 250

TOR X®

0 0.060 0.082 0.098 0.123 0.144 0.176

3C-Screwdriver Sets

2150-2160 PH-06 MS 3C SCREWDRIVER SET

2150-2160 PH-06 ELS 3C SCREWDRIVER SET

6 pieces

› Practical set composition in environmentally-friendly cardboard box. › For slotted and cross-head screws PH. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel.

Code No. 1482319 2150-2160 PH-06 MS

Contents ? 2150 4 5.5 6.5 8 ; 2160 PH1 PH2

0 0.660

Code No. 1482320 2150-2160 PH-06 ELS

Contents ? 2150 6.5 3-150 4-150 6.5-200 ; 2160 PH1 PH2

2163 TX 3C TORX® SCREWDRIVER SET

DT 2142-008 HEXAGON ALLEN KEY SET

10 pieces

8 pieces

› Practical set composition in environmentally-friendly cardboard box. › For recessed TORX® head screws. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Type of drive marked at end of the handle. › Blade from GEDORE Molybdenum-Vanadium-Plus tempered steel. › TORX® = reg. trademark of Acument Intellectual Properties, LLC. USA.

› With 2 hexagons, same size each end. › 2C-T handle. › Soft component made from thermoplastic elastomer. › Hard component made from fibre glass reinforced plastic. › With hanging hole. › GEDORE vanadium steel 61CrSiV5. › Positive-fit joint of handle and blade for optimum transmission of force.

Code No. 1482335 2163TX

Contents 7 2163 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40

0 0.740

Code No. 3037371 DT2142

Contents k 2142 2 2,5 3 4 5 6 8 10

0 0.660

NEW

0 0.970

SCREWDRIVER

Electronic Screwdrivers

165-171-06 ELECTRONIC SCREWDRIVER SET

165 TX-06 ELECTRONIC SCREWDRIVER SET

6 pieces

› For slotted head and cross-slotted head screws PH. › Blade in high-alloy Chrome Vanadium Molybdenum steel, chrome-plated. › Tip additionally coated for highest precision and corrosion protection. › 2-component handle in ergonomic design. › Pivoting end cap with micro anti-slip surface. › Colour coding of the drive type. › In plastic case. › With Gedore Check-Tool-System: 2-colour foam insert to check that the set is complete

› For recessed TORX® head screws. › Blade in high-alloy Chrome Vanadium Molybdenum steel, chrome-plated. › Tip additionally coated for highest precision and corrosion protection. › 2-component handle in ergonomic design. › Pivoting end cap with micro anti-slip surface. › Colour coding of the drive type. › In plastic case. › With GEDORE Check-Tool-System: 2-colour foam insert to check that the set is complete.

*WHILE STOCKS LAST

Code No. 1902849 165-171-06 *

Contents ; 165 PH 000 00 0 ? 171 IS 1,2 1,8 2,5

0 0.385

4611 POWER TESTING SCREWDRIVER › For 6-24 Volt with clamp cable.

Code No. 6698650 4611

0 115

Code No. 1902857 165-TX-06 *

Contents 7 165 TX T5 T6 T7 T8 T9 T10

0 0.415

Nut Drivers

2133 NUT DRIVERS WITH 3C HANDLE › Acc. to DIN 3125, ISO 2725-1. › 3-component handles. › Power-Grip3 with hanging hole. › Ergonomic handle design enables precise and fatigue-free working. › Positive-fit joint of handle and blade for optimum transmission of force. › Head depth 25 mm, blade length 125mm. › 10 mm and larger with hexagon bolster. › Blade from GEDORE Molybdenum-Vanadium-Plus steel. Code 1746731 1746758 1746766 1746855 1746863 1746898 1746901 1746928 1746944

No. 2133 5,5mm 2133 6mm 2133 7mm 2133 8mm 2133 9mm 2133 10mm 2133 11mm 2133 12mm 2133 13mm

$ 10 13 13 13

Ø 5 5 6 6 6 6 8 8 8

! 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0

N 225 225 235 235 235 245 245 245 245

0 0.107 0.109 0.135 0.152 0.168 0.198 0.202 0.221 0.225

2133 NUT DRIVER SETS for hexagon nuts › Made up of most popular sizes.

Code 1746947 1746946 1746948

No. 2133-06S 2133-06L 2133-09

55 SPARK PLUG SPANNER

Contents 2133 5,5 6,0 7,0 8,0 9,0 10,0 2133 8,0 9,0 10,0 11,0 12,0 13,0 2133 5,5 6,0 7,0 8,0 9,0 10,0 11,00 12,00 13,00

VDE NUT DRIVERS

0 0.648 0.937 1.300

1 36

SCREWDRIVER

Allen Keys

42 (MM) / (AF) HEXAGON ALLEN KEYS for hexagon screws › For hexagon socket head bolts. › Chrome Vanadium steel 59CrV4. › Gunmetal finish. › Short series. › In accordance with SANS 1210 and DIN 911. *WHILE STOCKS LAST Code 6342200 6342390 6342470 6340260 6340340 6340420 6340500 6340690 6340770 6340850 6340930 6341070 6341150 6341230 6341231 6341310 6341580 6341581 6341660 6341740 6341820

No. 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42

y 32 34 40 45 50 56 63 70 80 90 95 100 106 112 117 125 140 150 160 180 200

0,7mm 0,9mm 1,3mm 1,5mm 2mm 2,5mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm 14mm 16mm 17mm 19mm 22mm

0 0.001 0.001 0.001 0.002 0.002 0.003 0.004 0.010 0.018 0.030 0.042 0.060 0.080 0.100 0.130 0.160 0.260 0.320 0.440 0.620 0.950

Code

No.

6341900 6342550 6342040 6342041 6344330 6344410 6344411 6344680 6344760 6344840 6344920 6345060 6345140 6345141 6345220 6345300 6345490 6345491 6345570 6345571 6345572

42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42

42 / 42L (MM) / (AF) HEXAGON ALLEN KEY SETS

! 6347510 42-7M 6349050 42-8M 6349051 42-88M 6349052 42-100M 012112 42-22M 6349053 42-88P 6348910 42-9P 6351974 42L-7M 6351975 42L-9M 6351976 42L-14M*

0 1.250 1.760 0.001 0.002 0.003 0.005 0.007 0.009 0.015 0.020 0.030 0.055 0.090 0.140 0.190 0.270 0.360 0.420 0.600 0.900 1.400

42-88M

42L-9M

› Made up of most popular sizes.

Code

y 224 244 45 50 53 59 62 65 72 78 84 97 110 114 122 136 146 156 175 195 218

24mm 27mm 1/16 AF 5/64 AF 3/32 AF 1/8 AF 9/64 AF 5/32 AF 3/16 AF 7/32 AF 1/4 AF 5/16 AF 3/8 AF 7/16 AF 1/2 AF 9/16 AF 5/8 AF 11/16 AF * 3/4 AF 7/8 AF 1 AF

Contents 2 2,5 3 4 5 6 8 3 4 5 6 8 10 12 14 2 2,5 3 4 5 6 8 10 2 2,5 3 4 5 6 7 8 9 10 0,7 0,9 1,3 1,5 2 2,5 3 4 5 6 7 8 9 10 11 12 14 16 17 19 22 24 3/32” 1/8” 5/32” 3/16” 7/32” 1/4” 5/16” 3/8” 1/16” 5/64” 3/32” 1/8” 5/32” 3/16” 1/4” 5/16” 3/8” 2 2,5 3 4 5 6 8 1,5 2 2,5 3 4 5 6 8 10 1,5 2 2,5 3 4 5 6 7 8 9 10 11 12 14

0 0.200 0.700 0.300 0.400 6.200 0.200 0.300 0.200 0.400 2.200

42L (MM) / (AF) HEXAGON ALLEN KEYS

42KL (MM) / (AF) HEXAGON ALLEN KEY SETS

for in-hex screws

› For hexagon socket head bolts. › Chrome Vanadium steel 59CrV4. › Gunmetal finish. › Long pattern for use in hard to access areas. › Cranked shaft, resulting in a lever effect during tightening or loosening operation.

› Hexagon socket key with ball end and holder. › Chrome Vanadium steel 59CrV4. › Gunmetal finish.

*WHILE STOCKS LAST Code 6350809 6350810 6351030 6351110 6351380 6351460 6351540 2977486 6351620 6351621 6351700 6351890 6351891 6351970 6351971

No. 42L-1,5 42L-2 42L-2,5 42L-3 42L-4 42L-5 42L-6 42L-7 42L-8 42L-9 42L-10 42L-11 42L-12 42L-14 42L-17

1543375 1543376 1543377 1543318 1543319 1543326 1543334 1543342 1543369 1543350 1543385 1543386 1543393 1543407

42L-1/16 * 42L-5/64 * 42L-3/32 * 42L-1/8 * 42L-9/64 * 42L-5/32 * 42L-3/16 * 42L-7/32 * 42L-1/4 * 42L-5/16 * 42L-3/8 * 42L-7/16 * 42L-1/2 * 42L-9/16 *

y 90 100 112 125 142 163 184 194 205 216 231 244 259 290 333

0 0.002 0.003 0.005 0.008 0.020 0.030 0.050 0.070 0.100 0.140 0.180 0.240 0.290 0.445 0.600

80 80 84 94 102 103,5 111 122,5 130 150 168 188 206 266

0.002 0.003 0.004 0.007 0.010 0.013 0.030 0.040 0.045 0.082 0.130 0.200 0.290 0.400

42SCL HEXAGON ALLEN KEY SETS polypropylene holder.

› Easy to handle. › Indispensable pocket set for electricians.

*WHILE STOCKS LAST ! 6351972 42SCL-6M 6351973 42SCL-7M *

Contents 3 4 5 6 8 10 2 2,5 3 4 5 6 8

! Contents 6351977 42KL-7M 1,5 2 2,5 3 4 5 6 6351978 42KL-9M 1,5 2 2,5 3 4 5 6 8 10 6351979 42KL-7P 3/64” 1/16” 5/64” 3/32” 1/8” 1/4” 5/32”

0 0.250 0.395 0.300

42T (MM) / (AF) HEXAGON ALLEN KEYS for in-hex screws › Chrome Vanadium steel 59CrV4. › Blackened finish and blue polypropylene handle. › T-shaped handle, making tightening or loosening operations easier for users.

*WHILE STOCKS LAST

› Chrome Vanadium steel 59CrV4. › Blackened finish and blue

Code

0 0.170 0.175

Code 2647257 2647265 2647273 2647281 2647303 2647311 2681439 2667846 2647338

No. 42T-2 42T-2,5 42T-3 42T-4 42T-5 42T-6 42T-7 42T-8 42T-10

2647351 2647352 2647354 2647361 2647362 2647370 2647388 2647389 2647397 2647400

42T-5/64 * 42T-3/32 * 42T-1/8 * 42T-9/64 * 42T-5/32 * 42T-3/16 * 42T-7/32 * 42T-1/4 * 42T-5/16 * 42T-3/8 *

y 140 152 165 182 200 220 230 240 264 140 152 166 182 182 200 220 220 240 264

0 0.035 0.040 0.045 0.055 0.070 0.090 0.130 0.150 0.230 0.035 0.040 0.050 0.050 0.050 0.060 0.080 0.095 0.150 0.220

SCREWDRIVER

42SCKL HEXAGON ALLEN KEY SET

43TX CRANKED SOCKET KEY SETS

for in-hex screws

for recessed TORX® screws

› Hexagon socket key with ball end and holder. › Chrome Vanadium steel 59CrV4. › Gunmetal finish.

› Chrome Vanadium steel 59CrV4. › Gunmetal finish. › Supplied in plastic wallet.

*PACKAGING SUBJECT TO CHANGE WITHOUT NOTICE. TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

*WHILE STOCKS LAST Code

Contents ! 6351980 42SCKL 5M * 5 6 7 8 10

0 0.270

Code

! 6360959 43TX-08 Plastic Holder 6360961 43TX-15*

Contents T9 T10 T15 T20 T25 T27 T30 T40 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 T60

0 0.090 0.500

TORX® Keys

43TX CRANKED SOCKET KEYS

43 KTX CRANKED SOCKET KEY SET

for recessed TORX® screws

for recessed TORX® screws, with ball end

› Made from Chrome Vanadium steel 59CrV4. › L-shaped. › Long pattern for use in hard to access areas. › Gunmetal finish.

› Made from Chrome Vanadium steel 59CrV4. › L-shaped. › Cranked shaft, resulting in a lever effect during tightening or loosening operation. › Blackened finish.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA. Code

No.

6363550 6363630 6363710 6363980 6364010 6364280 6364360 6364440 6364520 6364600 6364790 6364870 6364950 6365090 6365170

43 TX-T6 43 TX-T7 43 TX-T8 43 TX-T9 43 TX-T10 43 TX-T15 43 TX-T20 43 TX-T25 43 TX-T27 43 TX-T30 43 TX-T40 43 TX-T45 43 TX-T50 43 TX-T55 43 TX-T60

+ M2 M2,5 M2,5 M3 M3-M3,5 M3,5-M4 M4-M5 M4,5-M5 M4,5-M5-M6 M6-M7 M7-M8 M8-M10 M10 M12 M14

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA. & 1,67 1,99 2,31 2,50 2,74 3,27 3,86 4,43 4,99 5,52 6,65 7,82 8,83 11,22 13,25

y 42 48 48 48 51 54 57 60 64 70 76 83 95 108 120

0 0.004 0.005 0.005 0.005 0.008 0.008 0.011 0.014 0.022 0.029 0.041 0.061 0.087 0.176 0.180

Code

! 6367897 43KTX-8M

Contents T9 T10 T15 T20 T25 T27 T30 T40

2163 TX TORX® SCREWDRIVER SETS

0 0.130

43TXL CRANKED SOCKET KEYS

43TXL CRANKED SOCKET KEY SETS

for recessed TORX® screws

› Made from Gedore Chrome Vanadium steel 59CrV4 › L-shaped. › Long pattern for use in hard to access areas. › Gun-metal finish.

› L-shaped. › Long pattern for use in hard to access areas.

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

*WHILE STOCKS LAST Code

! 6367895 43TXL 09 * 6367896 43TXL 15 *

Contents T7 T8 T9 T10 T15 T20 T25 T30 T40 T6 T7 T8 T9 T10 T15 T20 T25 T27 T30 T40 T45 T50 T55 T60

0 0.300 1.200

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

*WHILE STOCKS LAST Code

No.

6367106 6367107 6367108 6367109 6367110 6367380 6367460 6367540 6367620 6367700 6367890 6367891 6367892 6367893 6367894

43 TXL-T6 * 43 TXL-T7 * 43 TXL-T8 * 43 TXL-T9 * 43 TXL-T10 * 43 TXL-T15 * 43 TXL-T20 * 43 TXL-T25 * 43 TXL-T27 * 43 TXL-T30 * 43 TXL-T40 * 43 TXL-T45 * 43 TXL-T50 * 43 TXL-T55 * 43 TXL-T60 *

+ M2 M2,5 M2,5 M3 M3-M3,5 M3,5-M4 M4-M5 M4,5-M5 M4,5-M5-M6 M6-M7 M7-M8 M8-M10 M10 M12 M14

1,67 1,99 2,31 2,50 2,74 3,27 3,86 4,43 4,99 5,52 6,65 7,82 8,83 11,22 13,25

90 100 110 124 138 158 178 190 200 210 215 224 232 248 278

0.007 0.007 0.007 0.008 0.010 0.020 0.020 0.030 0.050 0.060 0.085 0.110 0.185 0.200 0.415

43TV TORX® GAUGE TESTER › Easy determination of internal or external TORX® sizes

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA.

Code

No.

0 0.023

024700 43 TV

Screwdriver Bits

687 / 690 SCREWDRIVER BITS

TORX®

› 687 For TORX® screws. › 690 For Phillips and POZIDRIV® screws. › Manufactured from high quality Molybdenum tool steel. › Gun metal finish. Code

No.

654183 654191 654205 654213 654221 654248 654256 654264 654272 654280 654299

687 TX - T6 687 TX - T7 687 TX - T8 687 TX - T9 687 TX - T10 687 TX - T15 687 TX - T20 687 TX - T25 687 TX - T27 687 TX - T30 687 TX - T40

+ M2 M2,5 M2,5 M3 M3-M3,5 M3,5-M4 M4-M5 M4,5-M5 M4,5-M5-M6 M6-M7 M7-M8

& 1,67 1,99 2,31 2,50 2,74 3,27 3,86 4,43 4,99 5,52 6,65

y 25 25 25 25 25 25 25 25 25 25 25

0 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005

POZIDRIV®

TORX® = Registered trademark of Acument Intellectual Properties, LLC. USA. POZIDRIV® = Registered Trademark of GKN Fasteners. Code

No.

654124 654132 655279 655287

690 PH 1 690 PH 2 690 PZD - 1 690 PZD - 2

y 25 25 25 25

0 0.005 0.005 0.005 0.005

PLIERS 72 - 89

PLIERS SETS

COMBINATION PLIERS 74

FLAT / ROUND NOSE 76

MECHANICS 77

CABLE STRIPPERS / CRIMPERS 80

CIRCLIP 82

PIPE WRENCHES 86

LOCKGRIP / UNIVERSAL 87

CUTTERS 88

TIN SNIPS / PIPE CUTTERS 89

PLIERS

Combination Pliers

8250 POWER COMBINATION PLIERS › According to DIN ISO 5746. › For heavy continuous use. › Good lever action for easy cutting. › For flat and round material.

› To cut all wire types including piano wire, 1.6 mm. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.

Gripping surface with file-cut for a particularly effective grip.

› Identifies the GEDORE Power Pliers range,

offering increased cutting and gripping force with up to 35% less effort.

Roughly toothed gripping surfaces for securely holding screws, pipes etc.

Inductively hardened cutting edges (62 - 64 HRC) ensure constant cutting power over a long time period.

Maximum cutting performance for minimal effort expended thanks to an optimum interaction of cutting geometry, eccentric rivet bearing and ergonomic handle design.

High-grade 2-component handles with finger protection enable work to be done ergonomically and without fatigue.

8250 POWER COMBINATION PLIERS Code 6707070 6707310

No. 8250 - 180 JC 8250 - 200 JC

y 180 200

8250-225 TL R 8260 POWER COMBINATION PLIERS FENCING PLIERS › For heavy, continuous use. › Good lever action for easy cutting. › Induction hardened precision cutting edge. › Hardness approximately 63HRC. › To cut all wire types, including piano wire. › DIN ISO 5756.

Code 6708040

No. 8250 - 225 TL

240 320

› For heavy duty, continuous use. › CrV material. › Hardened and tempered. › Cutting edges induction hardened.

y 225

Code 400

670250 670300

No. 8260 - 250 8260 - 300

y 250 310

570 930

Side Cutters / Pincers

8316 POWER SIDE CUTTER › According to DIN ISO 5749. › Good lever action for easy cutting. › For hard wire/piano wire. › Maximum cutting capacity Ø 1.4 - 2.0mm.

› Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.

Inductively hardened cutting edges (63 - 65 HRC) ensure constant cutting power over a long period. Maximum cutting performancefor minimal effort expended due to an optimum interaction of cutting geometry, eccentric rivet bearing and ergonomic handle design.

8316 POWER SIDE CUTTERS Code 6711930 6744190 6744510 6745080

No. 8316 - 140TL 8316 - 140 JC 8316 - 160 JC 8316 - 200 JC

8380 TOWER PINCERS

1,4 1,4 1,6 2,0

› Heavy-duty wire braid and mesh-cutting pincers. › Accoding to DIN ISO 9242, Form A. › Induction hardened precision cutting edges, hardness 61-63 HRC. › For medium-hard wire, 1.6 mm. › Heads ground, steel-grey, with blue dipped non-slip handles (TL). › Geometrically optimised head and handle areas for ergonomic use.

y 140 140 160 200

8381 PINCERS

132 152 210 305

› Standard heavy-duty pincers. › Accodingto DIN ISO 9243, Form A. › Induction hardened precision cutting edges, hardness 61-63 HRC. › Heads ground, steel-grey, with blue dipped non-slip handles (TL).

*WHILE STOCKS LAST Code

No. 6752020 8380 - 225 TL 6752100 8380 - 250 TL

y 225 250

Code

315 400

No. 6752370 8381 - 160 TL * 6751990 8381 - 200 TL * 6752450 8381 - 225 TL *

y 160 200 224

225 410 450

PLIERS

8132 TELEPHONE PLIERS

Flat Nose / Round Nose Pliers

8112 ROUND NOSE PLIERS

with cutting edge, serrated, straight pattern › Accoding to DIN ISO 5745. › Long, flat-round jaws, straight gripping faces, serrated. › For holding, gripping, bending and cutting. › Induction hardened precision cutting edges,

serrated

› › › › › › ›

Similar to DIN ISO 5745. Short jaws, serrated gripping faces. For gripping and bending. Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. JC = chrome-plated, with 2-component handles. TL = steel-grey, with blue dipped non-slip handles.

› ›

Code 6710610 6718860 6719240 6719670

hardness 61-63 HRC. Gedore special hardened and tempered steel, dropforged, oil-hardened and annealed. JC = chrome plated, with 2-component handles. TL = steel-grey, with blue dipped non-slip handles. No. 8132 - 140 TL 8132 - 140 JC 8132 - 160 JC 8132 - 200 JC

y 140 140 160 200

103 118 140 200

8132 AB BENT NOSE TELEPHONE PLIERS

with cutting edge, serrated, angled pattern

*WHILE STOCKS LAST Code

No. 6713200 8112 - 140 TL * 6713390 8112 - 140 JC

y 140 140

› Similar to DIN ISO 5745. › Long, flat-round jaws, angled gripping surfaces, 92 117

serrated.

› 45 ° angled tips make gripping round the corner possible.

› Induction hardened precision cutting edges, hardness 61-63 HRC.

› Gedore special hardened and

8120 FLAT NOSE PLIERS

R › ›

without cutting edge, serrated gripping faces › Accoding to DIN ISO 5745. › Long jaws, serrated gripping faces. › For holding and bending. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed. › JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.

tempered steel, drop-forged, oil-hardened and annealed. JC = chrome plated, with 2-component handles. TL = steel-grey, with blue dipped non-slip handles.

Code 6711180 6720920 6711260 6721300

No. 8132 - AB - 160 TL 8132 - AB - 160 JC 8132 - AB - 200 TL 8132 - AB - 200 JC

y 160 160 200 200

8135 TELEPHONE PLIERS

120 140 175 200

without cutting edge, serrated, straight pattern JC

› Accoding to DIN ISO 5745, straight pattern. › Flat-round tapered jaws, cross-hatched gripping surfaces and fine-tipped nose.

› Gedore special hardened and tempered ›

Code

No. 6710370 8120 - 160 TL 6715170 8120 - 160JC

y 160 160

121 140

steel, drop-forged, oil-hardened and annealed. Steel-grey, with blue dipped non-slip handles.

Code No. 6722460 8135 - 140 TL

y 140

8133 MULTIPLE PLIERS › Multifunctional pliers for the mechanical and electronic fields. › For holding, cutting, insulation-stripping, crimping, squeezing. › Flat-round jaws, straight gripping faces, serrated. › For medium-hard wire, 1.6 mm. › Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed.

› JC = chrome plated, with 2-component handles. › TL = steel-grey, with blue dipped non-slip handles.

Gripping faces with filecut for safe holding. Stripping of wire sizes 0.5/1.5/2.5mm2.

Cutting edge induction hardened (62-64 HRC).

Crimping of conductor endsleeves 0.5-2.5mm2. Squeezing of insulated flat plugs 1.0-2.5mm2.

8133 MULTIPLE PLIERS

with cutting edge, serrated, straight pattern Code No. 6722110 8133 - 180 JC

y 160

120

Mechanic‚s Pliers

8136 MECHANIC‘S PLIERS

without wire cutter, straight pattern › According to DIN ISO 5745. › Flat-round tapered jaws, cross-hatched › › ›

gripping surfaces. For holding, gripping and bending. Fine-tipped nose, for safe work in confined spaces. Gedore special hardened and tempered steel, drop-forged, oil-hardened and annealed.

Code No. 6722890 8136 - 200 TL

› JC = chrome-plated, with 2-component handles.

› TL = steel-grey, with blue dipped non-slip handles.

y 200

178

PLIERS

Pliers sets › Produced in-house by GEDORE Austria. › Combination, flat-nosed, round-nosed and mechanic‘s pliers made from Gedore special hardened and tempered steel. › Side cutters and end cutting nippers made from GEDORE high-performance hardened and tempered steel. › Chrome-plated, 2-component handle protectors. › Hot-forged tempered steel. › Precision-machined, oil-hardened and annealed.

› › › › › ›

Induction-rehardened cutting edges. Protective nickel and chrome plating. Optimum transfer of force. High cutting performance. Fatigue-free, even with constant use. Guaranteed GEDORE quality.

S 8003 JC PLIERS SET

S8303 JC PLIERS SET

3 pieces

› Practical set in environmentally friendly cardboard box.

Code

No.

› Practical set in environmentally friendly cardboard box.

Contents

6701110 S 8003 JC

8132-200 JC Telephone Pliers 8250-200 JC Combination Pliers 8316-200 JC Side Cutters

Code 1025

No.

6703160 S 8303 JC

Contents 142 10 JC Universal Pliers 8250-180 JC Combination Pliers 8316-160 JC Side Cutters

NEW

1102-003 PLIERS SET

S8393 JC PLIERS SET

3 pieces

› In Gedore L-BOXX® Mini, including divider set.

› Practical set in environmentally friendly cardboard box.

Code

No.

Contents

1692305

1102-003

8132-160 JC Telephone Pliers 8250-180 JC Combination Pliers 8316-160 JC Side Cutters

Code 940

No.

3012859 S 8393 JC

1005

Contents 142 10 TL Universal Pliers 8250-200 JC Combination Pliers 8314-180 JC Side Cutters

1005

Cable cutters

GEDORE WIRE ROPE CUTTERS

BOLT CUTTERS

› The cutting plates slide past each other dissecting the

› Notch cut; the cutters press into the material and create a

›

› The wire rope is compressed and thus loses its circular cross-

material. The wire rope is cleanly cut and retains its circular crosssection. It does not fan out.

Splicing: › The old seafaring ability to separate the rope into its individual strands so as to then braid them into a loop or lengthen the rope with another rope without knotting.

notch. The material is compacted and thus separated. section at the cut. The wire rope fans out as a result.

Fanning out: › Separation into individual strands is not wanted when cutting wire ropes. It is a very laborious business to splice wire ropes. That is why more up-to-date ways are available to incorporate loops in wire ropes. However, they require a smooth cut without any spliced strands.

8320 JL WIRE ROPE CUTTERS Execution:

› Easy-to-change cutting plates. › Cutting plates of powder metallurgical high-speed steel (HSS). Manufactured in the MIM process (Metal Injection Moulding).

› Extremely soft shearing cut reliably prevents the wire rope from fanning out.

Jaws/cutting edges: › Specially arched cutting edges. › Easy to replace cutting plates if worn. › Hardness 62-65 HRC. › Low force needed due to the optimum cutting-edge geometry. › Two integrated press profiles for Bowden cable terminal sleeves and cable end sleeves. Cutting performance: › Wire ropes up to 1800N/mm2 with maximum 6mmØ. (e.g. stainless steel wire ropes, wire ropes with steel and textile cores, Bowden cables, shears). › Wire up to 750N/mm2 with maximum 4mmØ. (e.g. nails/wire nails, screws, bolts, ceiling banners). Code 2788799

› Single- and multi-core copper and aluminium cables with maximum 6mmØ. Joint:

› Adjustable joint for precise cutting plate guidance. › Latch to prevent unwanted opening. Handles:

› With 2-component handles. Material/finish:

› Plier body hot drop-forged. › Chrome plated.

No. 8320 - 200 JL

y 200

480

Stripping Tools

8146 STRIPPING PLIERS

8146

with exchangeable module inserts, self-adjusting › Self-adjusting cutting and stripping tool for modern electrical installations and equipment circuitry (90% of all wires can be stripped without any adjustment of the tool).

› The use of easily exchangeable module inserts allows accurate stripping › ›

8146-1

8146-2

of a wide range of insulation materials, including PVC and PTFE, with just one tool. Flat blade included in delivery. Dimensions: 191 x 123 x 20mm.

Stripping capacity:

› 8146-1 with flat blade: 0.02-10mm2 / AWG 34-8 (for PVC insulation). › 8146-2 with round blade: 4-16mm2 / AWG 10-5. Code 1830805 1830813 1830821

No. 8146 8146-1 8146-2

Description Stripping pliers including module insert 8146-1 Module insert with flat blade Module insert with round blade

Cutting values: › Flexible wires up to 10mm2 / AWG 8. › Rigid wires up to 1.5mm2 / AWG 16. mm2 0,02-10 0,02-10 4-16

AWG 34-8 34-8 12-6

180 15 16

PLIERS

8147 HEAVY-DUTY CABLE STRIPPING TOOL

8148 PRECISION STRIPPING TOOL

› Professional wire stripping tool with 2 cable hooks. › Compact and user-friendly, even in the most difficult conditions. › For cables (up to 40mmØ) with any kind of insulation. › Blade can be locked in one of three positions (circular, straight or spiral cuts). › Cable capacity: 4.5 - 40mmØ. › Insulation thickness: up to 4.5mm.

› User-friendly, easy to handle, all-round cut. › Precision adjustment of cutting depth (adjuster wheel with 9 positions). › Replaceable blade. › Safe, rounded, pocket design. › Stripping capacity: 2.5 - 11mm. › Insulation thickness: up to 1.0mm.

for data cables

Dimensions: › 90.5 x 39.5 x 19mm. › E-8148 = Spare blade.

Dimensions: › with small cable hook: 150 x 42 x 30.5mm. › with large cable hook: 167 x 52 x 30.5mm. › E-8147 = Spare blade.

*WHILE STOCKS LAST

*WHILE STOCKS LAST Code

No. 1830856 8147 * 1884719 E-8147 Spare Blade *

Ø 4,5-40

Code

196 2

No. 1830864 8148 * 1884727 E-8148 Spare Blade *

Crimp Plier modular

ADVANTAGES: › Reliable: parallel action ensures precision crimping. › Easy to handle: components kept visible throughout the crimping process, easily accessible release function allows quick change of insert modules without the use of additional tools.

› Comfortable: lightweight, plastic-sheathed tool frame for comfort grip - even at low temperatures. › Practical: insert modules, easy to change and clearly labelled, supplied in pairs on a pin in a storage box to prevent loss (storage boxes interconnect - like a jigsaw puzzle).

› Versatile and economical: just one tool base frame can be used with all the various insert modules to carry out a

wide range of crimping processes, including heavy plug and socket connectors, coaxial connectors, optic fibres and RJ45 plugs.

CHANGING OF THE CRIMPING INSERTS › By pressing the release of the crimping insert you can easily remove the insert.

› Remove the crimping insert and put in the required insert while pressing down the release.

Ø 2,5-11

43 2

Crimp Plier Sets

S 8140 A CRIMPING PLIERS SET AUTOMOTIVE

S 8140 D CRIMPING PLIERS SET DATA COM

4 pieces

› Practical set made up for specific requirements in

› Practical set made up for specific requirements in data-

› ›

› Ideal for high-standard crimping. › Can be individually upgraded by purchasing additional

› ›

automotive engineering. Ideal for high-standard crimping. Can be individually upgraded by purchasing additional module inserts. Module inserts changeable without tools. In practical blister packaging.

communications installations.

module inserts.

› Module inserts changeable without tools. › In practical blister packaging. S 8140 A

8140-05

S 8140 D

8140-14

8140-11

8140-09

*WHILE STOCKS LAST Code

No. 1830910 S 8140 A *

8140-16

8140-17

*WHILE STOCKS LAST Contents

Code

Cripmer 8140

Inserts 05 09 11

754

Contents No. 1830937 S 8140 D Cripmer 8140

Inserts 14 16 17

S 8140 E CRIMPING PLIERS SET ELECTRONIC

S 8140 J CRIMPING PLIERS SET INDUSTRIAL

4 pieces

› Practical set made up for specific requirements for

› Practical set made up for specific requirements in

› ›

› Ideal for high-standard crimping. › Can be individually upgraded by purchasing additional

› ›

industrial maintenance.

electricians. Ideal for high-standard crimping. Can be individually upgraded by purchasing additional module inserts. Module inserts changeable without tools. In practical blister packaging.

module inserts.

› Module inserts changeable without tools. › In practical blister packaging. S 8140 J

S 8140 E

8140-01

8140-02

8140-05

8140-18

8140-06

*WHILE STOCKS LAST

*WHILE STOCKS LAST Contents No. 1830899 S 8140 E Cripmer 8140

711

Code

Code Inserts 01 02 05

760

No. 1830929 S 8140 J *

Contents Cripmer 8140

Inserts 02 06 18

752

PLIERS

Circlip pliers for external retaining rings (shafts)

8000 A 0 - A 4 - STRAIGHT BM 8000 A 01 - A 41 - BENT CIRCLIP PLIERS FOR EXTERNAL CIRCLIP PLIERS FOR RETAINING RINGS EXTERNAL RETAINING RINGS Form A

Form B

› For retaining rings as per DIN 471, DIN 983. › DIN 5254 Form A. › Straight tips. › With opening spring. › With clamping protection.

Code 6701380 6701460 6701540 6701620 6701700

No. 8000 A 0 8000 A 1 8000 A 2 8000 A 3 8000 A 4

F 5/32-3/8 3/8-1 3/4-2.3/8 1.5/8-4 3.3/8-5.1/2

› ›

hardened and tempered steel. Precision machined, oil hardened and annealed. Black, with red dipped handles.

E 3-10 10-25 19-60 40-100 85-140

Code

y 141 141 182 230 320

96 98 186 310 555

B M

› Straight tips. › Black, tips and lock lever zinc plated. › The toothed bracket stops the plier legs from

› Non-crush type release lever with handle

›

straddling beyond the permitted working area. This ensures safe working even in concealed fitting positions. Locking pin can be replaced.

Code

No. 6701890 8000 A 5

› For retaining rings as per DIN 471, DIN 983. › DIN 5254 Form B. › 90° angled tips. › With opening spring. › With clamping protection.

› Forged Gedore Chrome Vanadium special

8000 A 5 - STRAIGHT CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS

›

recesses, red dip insulated. Precision machined, oil hardened and annealed. E-8000 A = pair of spare tips.

F 4.13/16-11.7/8

E 122-300

y 550

No. 5701840 E-8000 A 5 Spare Tips

6702270 6702350 6702430 6702510 6702780

No. 8000 A 01 8000 A 11 8000 A 21 8000 A 31 8000 A 41

F 5/32-3/8 3/8-1 3/4-2.3/8 1.5/8-4 3.3/8-5.1/2

› Forged Gedore Chrome Vanadium special hardened and tempered steel.

› Precision machined, oil hardened and annealed.

› Black, with red dipped handles.

E 3-10 10-25 19-60 40-100 85-140

y 130 130 170 210 305

97 97 182 317 563

8000 A 51 - BENT CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS › 90° angled tips. › Tips and lock lever zinc plated. › Lever handle end red dip insulated. › Finger protection.

Code 1900

Code

B N

No. 6702860 8000 A 51

B N

› Reinforced safety arms. › Precision machined, oil hardened and annealed.

› E-8000 A = pair of spare tips.

F 4.13/16-11.7/8

E 122-300

y 560

1898

Code 72

No. 5702810 E-8000 A 51 Spare Tips

112

Circlip pliers for internal retaining rings (bores)

A M

8000 J 0 - J 4 - STRAIGHT CIRCLIP PLIERS FOR INTERNAL RETAINING RINGS Form C

› For retaining rings as per DIN 472, DIN 984 › DIN 5256 Form D. › 90° angled tips. › Forged Gedore Chrome Vanadium special

› Precision machined, oil hardened and ›

annealed. Black, with blue dipped handles.

No. 8000 J 0 8000 J 1 8000 J 2 8000 J 3 8000 J 4

D 3/8-9/16 3/8-1 3/4-2.3/8 1.5/8-4 3.3/8-5.1/2

C 8-13 12-25 19-60 40-100 85-140

y 141 141 183 230 322

Code 0.080 0.081 0.164 0.281 0.472

A M

8000 J 5 - STRAIGHT CIRCLIP PLIERS FOR INTERNAL RETAINING RINGS › Straight tips. › Black, tips and lock lever zinc plated. › The toothed bracket stops the plier legs from ›

straddling beyond the permitted working area. This ensures safe working even in concealed fitting positions.

Code

No. 6703750 8000 J 5

› Locking pin can be replaced. › Non-crush type release lever with handle recesses, blue dip insulated.

› Precision machined, oil hardened and

annealed.

› Black, with blue dipped handles.

annealed.

6704130 6704210 6704480 6704560 6704640

No. 8000 J 01 8000 J 11 8000 J 21 8000 J 31 8000 J 41

D 3/8-9/16 3/8-1 3/4-2.3/8 1.5/8-4 3.3/8-5.1/2

C 8-13 12-25 19-60 40-100 85-140

y 129 129 169 214 292

0.080 0.082 0.161 0.279 0.484

8000 J 51 - BENT CIRCLIP PLIERS FOR INTERNAL RETAINING RINGS › 90° angled tips. › Black, tips and lock lever zinc plated. › Lever handle end blue dip insulated. › Finger protection.

A N

› Reinforced safety arms. › Precision machined, oil hardened and annealed.

› E-8000 J = pair of spare tips.

D 4.13/16-11.7/8

C 122-300

y 565

Code 1836

Code

No. 5703700 E-8000 J 5 Spare Tips

› Precision machined, oil hardened and

hardened and tempered steel.

6703240 6703320 6703400 6703590 6703670

A N

Form D

› For retaining rings as per DIN 472, DIN 984. › DIN 5256 Form C. › Straight tips. › Forged Gedore Chrome Vanadium special

Code

8000 J 01 - J 41 - BENT CIRCLIP PLIERS FOR INTERNAL RETAINING RINGS

No. 6704720 8000 A 51

D 4.13/16-11.7/8

C 122-300

y 575

1898

Code 72

No. 5704780 E-8000 J 51 Spare Tips

116

PLIERS

Circlip Pliers Assortment

S 8000 SET OF CIRCLIP PLIERS

B A M N

4 pieces

B A M N

8 pieces

› Most popular sizes, packed in environmentally friendly cardboard box. › Particularly suitable for barely accessible places. › For internal and external circlip rings. › With straight and 90° angled tips.

Code

No.

6701030

S 8000 External: 8000-A2 Straight 8000-A21 Angled Internal: 8000-J2 Straight 8000-J21 Angled

› Most popular sizes, packed in sturdy plastic case. › Particularly suitable for barely accessible places. › For internal and external circlip rings. › With straight and 90° angled tips. › In Gedore i-BOXX® 72, with transparent cover for easy view.

Contents 756

NEW

S 8000 JE CIRCLIP PLIERS FOR INTERNAL RETAINING RINGS

Code

No.

Contents

3041999

S8000 JE

Internal: 8000-JE 1 Straight 8000-JE 2 Straight Internal: 8000-JE 11 Angled 8000-JE 21 Angled

1101-001 SET OF CIRCLIP PLIERS

B M N

756

Code

No.

1692275

1101-001

Contents External: 8000-A1 Straight 8000-A11 Angled 8000-A2 Straight 8000-A21 Angled Internal: 8000-J1 Straight 8000-J11 Angled 8000-J2 Straight 8000-J21 Angled

1550

NEW

S 8000 AE CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS

Code

No.

Contents

3041980

S8000 AE

External: 8000-AE 1 Straight 8000-AE 2 Straight External: 8000-AE 11 Angled 8000-AE 21 Angled

A M N

756

Grip Wrenches

THE TOGGLE LEVER – A GIANT AMONG THE JOINTS › Similar in construction to the human leg and consisting of hip, knee and ankle joints › The knee joint's intelligent power management is its unbeatable advantage: › Clever utilization of the physical lever laws *) › Rapid and powerful even with a reduced operating force › Ideal for optimum pressure and clamping operations

› Maximum pressing/clamping force with knee lever extended – even with automatic locking effect i.e. self-clamping effect (e.g. with grip pliers) relieved by operating the releasing lever

› Constant high quality of work

Self-clamping effect – can only be cancelled by operating the releasing lever!

134 STRAIGHT JAW GRIP WRENCH

137 GRIP WRENCHES

› For secure clamping, gripping and holding. › Chrome Vanadium steel 31CrV3. › Nickel plated. › Jaws hardened to 50HRC. › With adjusting screw and release lever with moulded plastic grip. › Safe release.

› For secure clamping, gripping and holding. › Chrome Vanadium steel 31CrV3. › Nickel plated. › Jaws hardened to 50HRC. Three-point shaped bottom jaw, upper jaw with wire groove. › With adjusting screw and release lever with moulded plastic grip. › Safe release.

Code

No. 745995 134 / 250

O 25

y 230

Code

570

No. 640662 137 / 175 640670 137 / 250

O 25 32

y 185 230

293 546

138 WELDER'S GRIP WRENCH

138 Y PROFILE-SECTION GRIP WRENCH

› For clamping strips and profile sections when welding. › Cast steel jaws. › Nickel plated. › Release lever blue dip insulated.

› For clamping bulky profile and angle sections. › Strong forged jaws. › GEDORE special chrome-vanadium steel, nickel-plated. › Release lever blue dip insulated.

Code

No. 6407350 138

y 280

Code 960

6407860

No. 138 Y

O 95

P 75

y 280

763

PLIERS

Pipe Wrenches

DID YOU KNOW?

Permit No. 9668 / 15323

Gedore heavy duty pipe wrenches are the ONLY pipe wrenches in South Africa with the SABS certified mark.

225 PIPE WRENCHES

227 PIPE WRENCHES

Stillson type

American pattern

› Drop forged, CHROME VANADIUM handle, hardened and tempered. › Drop forged hook, hardened and tempered from selected carbon steel. › Jaw teeth induction hardened. › Blue epoxy powder coated. › In accordance with SANS 1028.

› For heavy duty applications. › Drop forged hook, hardened and tempered from selected carbon steel. › Jaw teeth induction hardened. › Spheroidal graphite cast handle. › Blue epoxy powder coated. › In accordance with SANS 1028.

Code 645036 645044 645052 645060 645079 645087

No. 225/250 225/300 225/350 225/450 225/600 225/900

O 34 44 49 60 76 102

[ 1 1.1/4 1.1/2 2 2.1/2 3.1/2

y 250 300 350 450 600 920

225 SPARES

Code 580 770 1035 1630 3000 6780

645303 645311 645344 645346 645354 645362 645370 645374

227 SPARES

Code

No.

Code

544027 544035 544043 544051 544078 544086 544825 544833 544841 544868 544876 544884 544922 544930 544949 544957 544965 544973 545007 545015 545023 545031 545058 545066 545252 545260 545309 545279 545317 545287

E 225 A / 250 Frame E 225 A / 300 Frame E 225 A / 350 Frame E 225 A / 450 Frame E 225 A / 600 Frame E 225 A / 900 Frame E 225 B / 250 Knurl E 225 B / 300 Knurl E 225 B / 350 Knurl E 225 B / 450 Knurl E 225 B / 600 Knurl E 225 B / 900 Knurl E 225 C / 250 Hook E 225 C / 300 Hook E 225 C / 350 Hook E 225 C / 450 Hook E 225 C / 600 Hook E 225 C / 900 Hook E 225 D / 250 Pin E 225 D / 300 Pin E 225 D / 350 Pin E 225 D / 450 Pin E 225 D / 600 Pin E 225 D / 900 Pin E 225 EF / 250 Rivet & Spring E 225 EF / 300 Rivet & Spring E 225 EF / 350 Rivet & Spring E 225 EF / 450 Rivet & Spring E 225 EF / 600 Rivet & Spring E 225 EF / 900 Rivet & Spring

545376 545384 545392 545406 545414 545422 545368 545430 545449 545457 545465 545597 545473 545481 545503 545511 545538 545635 545546 545554 545562 545570 545589 545643 545426 545469 545540 545592

No. 227/200 227/250 227/300 227/350 227/450 227/600 227/900 227/1200

Composite

No. E 227 A / 200 Spring E 227 A / 250 Spring E 227 A / 350 Spring E 227 A / 450 Spring E 227 A / 600 Spring E 227 A / 900 Spring E 227 B / 200 Knurl E 227 B / 250 Knurl E 227 B / 350 Knurl E 227 B / 450 Knurl E 227 B / 600 Knurl E 227 B / 900 Knurl E 227 C / 200 Jaw & Pin E 227 C / 250 Jaw & Pin E 227 C / 350 Jaw & Pin E 227 C / 450 Jaw & Pin E 227 C / 600 Jaw & Pin E 227 C / 900 Jaw & Pin E 227 D / 200 Hook E 227 D / 250 Hook E 227 D / 350 Hook E 227 D / 450 Hook E 227 D / 600 Hook E 227 D / 900 Hook E 227 A / 1200 E 227 B / 1200 E 227 C / 1200 E 227 D / 1200

O 34 49 55 60 76 90 140 210

y 190 245 300 320 410 550 800 1040

415 785 1180 1625 2780 4190 9595 14500

210 PIPE WRENCH

E 210A SPARE CHAIN & JAWS (PAIR)

Chain pipe wrench › Double sided replaceable serrated jaws. › Selected carbon steel. › Drop forged, heat treated. › Red epoxy powder coated handle.

Code 032000 032005 032010 032020 032040

No. 210 / 50 210 / 75 210 / 100 210 / 150 210 / 200

Pipe Size

y 510 710 950 1140 1320

10-60mm 15-90mm 27-115mm 35-165mm 45-220mm

1600 4400 8000 11500 13000

Code 032099 032100 032101 032102 032104

No. E 210 A / 50 Chain E 210 A / 75 Chain E 210 A / 100 Chain E 210 A / 150 Chain E 210 A / 200 Chain

032049 032050 032051 032052 032054

E 210 B / 50 Pair of Jaws E 210 B / 75 Pair of Jaws E 210 B / 100 Pair of Jaws E 210 B / 150 Pair of Jaws E 210 B / 200 Pair of Jaws

Chain Lengths 325mm 420mm 530mm 765mm 960mm

Water Pump / Universal Pliers

142 UNIVERSAL PLIERS

143 UNIVERSAL PLIERS 6 settings

› According to DIN ISO 8976 Form C. › With safety box joint and protection against blocking.

› Fine adjustment. › 142 10 = 15 settings. › Single-hand adjustment for safe clamping. › Slim pliers head for places that are hard to ›

access. Long slim jaws.

› Offset gripping faces for self-gripping – no

slipping off. › Gedore special Chrome Vanadium steel. › Induction rehardened serrated faces. › Model C = slim handles with forged serrations. › Model JC = chrome-plated, with 2-component handles › Chrome Vanadium special steel.

› According to DIN ISO 8976 Form B. › Offset gripping faces for self-gripping of nuts and pipes. › Pinch protector. › For pipes up to 1.1/2" and nuts up to 38mm.

› Slim handles with forged serrations

Code 6410650 5410600

No. 143 10 C E 143 A/10 Spare Screw and Nut

O y 38 256

0.340

142 10 JC

145 WATER PUMP PLIERS 142 10 TL

› 145 10C = 7 settings. › 145 15C = 9 settings.

142 10 C

Code 6416260 6416340 6416180 5537190

145 10 C

No. 142 10 C 142 10 JC 142 10 TL E 142 A/10 Spare Screw and Nut

O 38 38 38

y 250 260 255

*WHILE STOCKS LAST 0.380 0.417 0.371

Code 6412000 6412190 2962683

No. 145 10 C 145 15 C * E 145 A/10 Spare Screw and Nut

O 39 50

y 250 375

0.365 0.854

PLIERS

Bolt Cutters

8340 / 8340 Z BOLT CUTTERS › An effective force multiplication ratio of 1:30 near the cutting edge. › Compact power bolt cutters with effective cutting performance. › Force optimised, cutting near joint is guaranteed. › Optimum lever action requires less effort. › Wear-free rotating/thrust block bolt to reduce sliding friction when cutting.

10 N

300 N 30 : 1 10 N

8340

8340 Z

› From soft to hard wires up to 4mmØ. › The grooves in the blades prevent sliding while cutting.

› With a two-cut process, from soft to hard wires 4 to 6mmØ. › The extra cutting edge (1) serves as a first cut for thick bolts and engraves them. › In the second step, the main cutting edge (2) cuts through the bolt completely.

8340 MINI BOLT CUTTERS

8340 Z MINI BOLT CUTTERS

› The positioning of the blades close to the joint

› Optimum lever action requires less effort. › Precision blades that can cut soft wire up to › Cutting edges additionally inductively hardened 6.0mmØ, hard wire up to 5,5mmØ and piano

›

creates a particularly effective power to cutting ratio. Blades additionally induction hardened (63-65HRC).

› Precision cutting edges for soft wire up to ›

6.0mmØ, hard and piano wire up to 3.8mmØ. Model JL = steel-grey, with blue dipped handle protectors.

(63 - 65HRC).

wire up to 3,8mmØ.

leverage for thicker wire diameters.

protectors.

› Double-sided milling near the joint ensures best › Model JL = steel-grey, with blue dipped handle

8340-200 JL 8340 Z-200 JL

Code No. 2541300 8340 - 200JL

y 200

0 0.389

Code No. 2666324 8340Z - 200JL

0 1.680 2.460 4.700 5.000

Code 2675196 2675218 2675226 2675234

8178 BOLT CUTTERS › Accoding to DIN ISO 5743. › Double cam bolt adjustment. › Cutting head replaceable. › Cutters from Chrome Vanadium steel. › Maximum cutting performance 48HRC.

Code 2675137 2675145 2675153 2675161

No. 8178 - 460 8178 - 620 8178 - 780 8178 - 900

max. E z 5 18 7 24 8 30 9 36

y 460 620 780 900

No. E 8178 460 Replacement Cutting Head E 8178 620 Replacement Cutting Head E 8178 780 Replacement Cutting Head E 8178 900 Replacement Cutting Head

y 200

0 0.389

Pipe Cutter

220 for steel pipes › Heavy duty pipe cutters. › Frame in malleable cast steel. › TUBEX®

Code No. 4503400 220020 1/8-2”

, 10-60

Wall thickness 2.0-6.3

y 380

0 2.90

Code

No. 4503750 220220 Spare Wheel

Tin Snips

8516

8531

scissors pattern

straight pattern

› American Pattern. › Carbon steel SAE1045. › Drop forged and heat treated.

Code 675504 675547

› Cutting surfaces induction hardened. › Precision ground cutters. › Blue epoxy powder coated.

No. 8516/250 8516/300

y 250 300

› English Pattern. › Carbon steel SAE1045. › Drop forged and heat treated.

0 0.525 0.675

Code 675784 675792 675806

No. 8531/200 Left-hand Cutting 8531/250 Left-hand Cutting 8531/300 Left-hand Cutting

424

425

ideal pattern snips

figure snips

› For straight continuous and shape cutting. › With lever action. › Self-opening with installed spring and lock. › Polished cutting edges.

› Sheet thickness maximum 1.2mm at strength ›

of 600N/mm2. Non-slip two-component handles.

*WHILE STOCKS LAST Code

No. 4515410 424-260 Right-hand Cutting *

› Cutting surfaces induction hardened. › Precision ground cutters. › Blue epoxy powder coated.

› For straight continuous and shape cutting. › With lever action. › Self-opening with installed spring and lock. › Polished cutting edges.

y 200 250 300

0 0.290 0.455 0.660

› Sheet thickness maximum 1.2mm at strength ›

of 600N/mm2. Non-slip two-component handles.

*WHILE STOCKS LAST y 160

0 530

Code

No. 4515760 425-260 Right-hand Cutting *

y 260

0 480

AUTOMOTIVE & SPECIAL TOOLS 90 - 101

AUTOMOTIVE TOOLS

TYRE FITMENT TOOLS 92

FILTER / SPARK PLUG TOOLS 93

LIFTERS 94

PISTON / VALVE TOOLS 95

SPECIAL PLIERS 95

BRAKE TOOLS 96

MEASURING TOOLS 97

SAWS 98

TOOLKITS 100

AUTOMOTIVE TOOLS

Box Spanners

Wheel Wrenches

26R 27 DOUBLE ENDED BOX SPANNERS WHEEL SOCKET WRENCH › In tubular steel, hardened. › Chrome plated.

Code

No.

6210050 6210210 6210640 6210990 6211370 6211610 6211880 6211960 6212260 6212340 6212690 6212770 6213070 6213310

26R 6x 7 26R 8x 9 26R 10x 11 26R 12x 13 26R 14x 15 26R 16x 17 26R 17x 19 26R 18x 19 26R 20x 22 26R 21x 23 26R 24x 27 26R 25x 28 26R 30x 32 26R 36x 41

› Chrome Vanadium steel 31CrV3. › Chrome plated.

y 105 110 120 140 140 150 160 160 170 170 190 200 200 220

Code 28 35 45 75 90 120 180 180 210 215 300 350 380 650

026050 026060 026150 026155 026156 026165 026168 026170 026175 026180

No. 27-22x24 27-24x27 27-27x30 27-27x32 27-27x33 27-30x32 27-30x33 27-32x33 27-21x38 27-21x41

19 19 19 21 21 21 21 21 19 21

y 500 500 500 500 500 500 500 500 500 500

0 1700 1800 2300 2300 2300 2300 2300 2400 2300 2500

026052 026152

27d/35d-19 (19.05mmx500) 27d/35d-21 (20.89mmx500)

19 21

500 500

1095 1300

26RS STEPPED TOMMY BAR

28 4-WAY WHEEL WRENCH

› Chrome Vanadium steel 31CrV3, hardened. › Chrome plated.

› Chrome Vanadium steel 31CrV3. › Blue epoxy powder coated.

Code

No.

652806 26RS 1 - Fits 26R 6x7 - 10x11 652814 26RS 2 - Fits 26R 12x13 - 16x17 652822 26RS 3 - Fits 26R 17x19 - 36x41

y 190 240 330

40 140 500

KD-26R BOX SPANNER SET 7 pieces

*WHILE STOCKS LAST Code

No.

621846

KD-26R

Contents 8x9 10x11 12x13 14x15 16x17 18x19

Accessories 26RS 2 Tommy Bar

Code

0 0.685

No. 622761 28 PU 622869 28 CV 6229150 28 LV *

Size 17x19 21x22 19x20 24x27 34.5x38 45x25.3

y 420x420 595x583

0 1360 3690 4900

Tyre Levers

Filter Tools

38 / 39 TYRE LEVERS

36 OIL FILTER STRAP WRENCH › Chrome Vanadium steel 31CrV3. › Chrome plated. › Strong wide strap. › Light duty.

› Chrome Vanadium steel 31CrV3. › Drop forged. › 38 = Chrome plated. › 39 = Blue epoxy powder coated. 38

Code

No.

633267 633283 633305

38 / 400 38 / 500 39 / 610

y 400 500 610

0 0.458 0.576 1.463

Code

No.

6327320 6327400 5327380 5327460

36 / 1 36 / 2 E 36 / 1 Strap E 36 / 2 Strap

y 220 285

307 470

1.75 OIL FILTER HOOK › Three-arm pattern. › For removing firmly seated oil filters.

Pry Bars

139 PRY BARS

Code

No.

8117420 1.75/1

y 60-120

600

y 63

119

Spark Plug Tools

› Chrome Vanadium steel 31CrV3. › Drop forged.

50 SPARK PLUG SOCKET Code No. 1396597 139 - 350X19 Pry Bar 1396598 139 - 450X19 Pry Bar

SAWS

y 350 450

0 0.797 1.020

› Chrome Vanadium steel 31CrV3. › Chrome plated. › To be used in conjuction with 1/2” drive socket accessories.

Code

No.

636614 50/20,8mm-13/16

AUTOMOTIVE TOOLS

54 SPARK PLUG SOCKET

647 SPARK PLUG BRUSH

› Chrome Vanadium steel 31CrV3. › Chrome plated. › To be used in conjuction with 1/2” drive socket accessories.

› With plastic handle and brass wire bristles.

Code Code

No.

636622 54 / 16mm

y 63

No.

Bristle Length

6531950 647

15mm

y 180

y 390

0 1.25

Lifters

55 SPARK PLUG SPANNER

121 G SUCTION CUP LIFTER

› Chrome Vanadium steel 31CrV3. › Chrome plated. › Hot forged socket head with plug retainer, swivel joint. › Handle with blue PVC sleeve.

› Two hinged suction heads with safety locking. › Oil and acid resistant ABS plastic. › Lifting capacity approximately 80kg.

*INDENT ONLY Code

No.

636606 55 / 20,8mm

y 238

Code 298

No.

6391170 121 G *

, 120

58 SPARK PLUG SPANNER

121 G-3 SUCTION CUP LIFTER

› Chrome Vanadium steel 31CrV3. › Hot forged socket head with plug retainer. › Chrome plated. › Swivel joint.

› Three hinged suction heads with safety locking. › Oil and acid resistant ABS plastic. › For curved glass and panels. › Lifting capacity approximately 120kg.

Code

No.

636355 636339 636347 636312 636320

58 / 16mm 58 / 20,8 mm 58 / 16 & T-Bar 58 / 20,8 & T-Bar 58 Tommy Bar

y 301 500 301 500 199

330 340 455 465 125

*INDENT ONLY Code

No.

6390870

121 G-3 *

, 120

0 1.27

642 SP MAGNETIC LIFTER

126 PISTON RING PLIERS

with lamp, mirror and clip

› For secure fitting of piston rings. › Handles with blue sleeves.

› For searching for and picking up of small metal parts in confined areas.

› Magnet can be removed if necessary. › Mirror diameter 30mm.

Code

No.

6536750

Diameter of magnet

642 SP

12mm

y 500

172

Code

No.

6397370 6397450

126 1-100 126 2-120

O 55-100 80-120

640 MAGNETIC LIFTER

126-060 PISTON RING PLIERS

› With flexible shaft and plastic handle. › Bright nickel plated.

› For secure fitting of piston rings. › With prism holder and adjusting screw.

y 200 240

0 0.250 0.410

y 210

0 0.160

*WHILE STOCKS LAST Code

No.

Diameter of magnet

6531280 640

12mm

y 520

230

Pistons / Valves / Special Pliers

Code

No.

6397100

126 0-60 *

, 30-60

128 VALVE SPRING TENSIONER

125 PISTON RING CLAMP BAND

› For overhead valve engines with one each straight and offset pair of hooks. › Bright nickel plated. › Type 2-225 handle with blue sleeve.

› Made from special spring strip steel with continuous adjustment. › With tightening key.

*WHILE STOCKS LAST Code

No.

6396800 6396990 6397020

125-1 125-2 125-3

, 57-125 90-175 90-175

y 80 80 165

0 0.310 0.350 0.650

Code

No.

6398500 6398690

128 2-225 128 1-280 *

, 60-225 120-280

y 290 390

0 1.20 3.25

AUTOMOTIVE TOOLS

132 HOSE CLAMP PLIERS

132 CLIC CLIC HOSE CLAMP PLIERS

› For self-clamping hose clips. › Chrome plated handles.

› For CLIC-R hose clamps. › Polished, bright nickel plated, joint gunmetal finished. › Forged for clip sizes 5-30mm.

*INDENT ONLY

Code

No.

6399900

132-220 *

y 220

0 0.215

Code

No.

1396714

132-180 *

y 180

8134 INSTALLATION PLIERS

8276 BALANCE WEIGHT PLIERS

› Chrome Vanadium steel 31CrV3.

0 0.247

*INDENT ONLY Code

No.

6722030

8134-170C *

y 170

0 0.200

Brake Tools

Code

No.

6739350

8276-250C

STEEL RULER

› Chrome Vanadium steel 31CrV3. › For drum brakes. › With special holder and support crown, especially suitable for adhesive brake linings. › Chrome plated.

› Stainless steel with polished finish. › Permanently engraved. › Metric to imperial conversion table on reverse side.

*WHILE STOCKS LAST No.

6405300 6405490

135 - 13 135 -19 *

0 0.315

Measuring Tools

135 BRAKE SPRING PLIERS

Code

y 250

y 330 480

0 0.370 0.850

Code

No.

0134000 0134100 0134300

Measuring Rule - 150mm Measuring Rule - 300mm Measuring Rule - 600mm

y 150 300 600

q 6 12 24

0 0.050 0.060 0.120

702 FEELER GAUGE SET › With protective handle. › Handle nickel plated. › Folding. › Blade length 100mm.

Code

No. 6547790 702 13 M 6547870 702 20 M 6547950 702 21 M 6548680 702 13 A 6548760 702 22 A 6548840 702 26 A

Contents 5 10 15 20 25 30 40 50 60 70 80 90 100 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 .002AF .003AF .004AF .005AF .006AF .008AF .010AF .012AF .015AF .020AF .025AF .030AF .035AF .004 - .025 increasing by 1/1000” .0015 - .025 increasing by 1/1000”

0 0.065 0.100 0.068 0.055 0.081 0.080

PRECISION ENGINEERING TOOLS INSIDE SPRING CALIPER

Code

No.

0140100 0140200 0140300 0140400 0140500

Inside Spring Caliper Inside Spring Caliper Inside Spring Caliper Inside Spring Caliper Inside Spring Caliper

y q 100 4 150 6 200 8 250 10 300 12

0 0.085 0.133 0.180 0.240 0.260

OUTSIDE SPRING CALIPER

Code

No.

0141100 0141200 0141300 0141400 0141500

Outside Spring Caliper Outside Spring Caliper Outside Spring Caliper Outside Spring Caliper Outside Spring Caliper

SPRING DIVIDER

y q 100 4 150 6 200 8 250 10 300 12

0 0.080 0.133 0.180 0.250 0.260

Code

No.

0142000 0142100 0142200 0142300 0142400

Spring Divider Spring Divider Spring Divider Spring Divider Spring Divider

ENGINEERS SCRIBER

ENGINEERS SQUARE

› Double-ended with one straight point and the other at 90 degrees. › Ideal for use in confined spaces.

› Hardened blade. › Accurately ground blade and stock ensures

y q 75 3 100 4 150 6 200 8 250 10

0 0.080 0.080 0.133 0.180 0.267

straightness and parallelism.

› Accurate right angles on inside and outside. › Ideal for setting up and checking machinery.

Code

No.

0321001

Engineers Scriber

y 190

0 0.045

Code

No.

0110100 0110200 0110300

Engineers Square - 75mm Engineers Square - 100mm Engineers Square - 150mm

Blade Length y 75 100 150

0 0.115 0.133 0.288

AUTOMOTIVE TOOLS

Saws

Miscellaneous

403 HACKSAW

BRASS PUMP OIL CAN

› Adjustable tubular steel frame. › For 10” and 12” hacksaw blades. › Shatterproof blades.

› Dome shaped body. › Brass suction pump. › Heavy gauge tin. › Powder coated. › Pump has two ball valves. › Lack of spring on the bottom suction valve prevents malfunctioning.

Code 039010 5500350

No. 403 403A Hacksaw Blade 24TPI - Pack of 10

y 435 300

0 0.360 0.120

407 HACKSAW

Code

No.

4163300

Brass Pump Oil Can

Capacity (ml)

0 0.278

500

4530 TOWROPE

› Pressure cast aluminium. › Ergonomic soft rubber grips. › Adjust saw blade by turning blue clamping element in the hand grip.

Code

No.

1879375

407

0 0.650

Code

No.

669776 669806

4530- 2 Ton 4530- 4 Ton

JUNIOR HACKSAW

SAFETY GLASSES

› Powder coated, steel wire frame. › Easy blade replacement. › Shatterproof blade. › Finger guard prevents injury.

› Euro type spectacles, polycarbonate lens CE (EN 166-2001). › Clear anti-scratch lens.

Code

No.

3012000

Junior Hacksaw

0 0.083

Code

No.

200638

DV026C Safety Glasses & Bag

y 3500 3500

0 0.310 1.700

0 0.035

905 CREEPER

G-CLAMPS

› Ergonomically shaped one-piece creeper. › With practical carrying handle › Made form PP (polypropylene) › Six swivel castors ensure easy, safe manoeuvrability › Two storage trays › Head and neck cushion for maximum comfort › Bucket moulding gives additional support and allows freedom of movement › Carrying capacity: 130kg › Temperature range: -30C to +60C › Dimensions: 1030 x 480 x 115mm Code

No.

3580000 3580100 3580200 3580300

G-Clamp G-Clamp G-Clamp G-Clamp

y q 75 3 100 4 150 6 200 8

0 0.500 0.900 1.400 1.500

299 DRAIN PLUG SPANNER › Chrome Vanadium steel 31CrV3. › Chrome plated. › For square bungs on engine pumps, tanks and drums for oil and chemicals. › Five square sizes: 8.7 9.5 10.5 11.5 13mm › Four tapered sizes: 6.8-8.7 10.5-13 15.2-18 16.5-19mm › One screwdriver blade: 5.5 x 18mm

Code

No.

1823698

905

0 5.00

Tool Bags Code

No.

6464580

299

y 220

0 0.450

907 FENDER PROTECTOR › Protection from unwanted scratches, dents and dirt. › Magnetic attachment keeps paintwork safe from damage – also attaches to galvanised steel. › Rugged, padded imitation leather and reinforced edges provide a perfect, cushioned working area. › Dimensions: 1100x650mm with wheel cut-out to allow easy acccess.

TOOL BELTS TOOL BAG / WAIST POUCH › Fabric construction in 600D polyester canvas. › Water repellent and durable. › Toolbag: 38mm reinforced polypropylene webbing straps. › Waist Pouch: 25mm reinforced polypropylene webbing straps. › YKK zip and nickel rivets for additional reinforcing. › Reinforced loops for screwdrivers and pliers.

Waist Pouch

Zipped Tool Bag

Code

No.

1942956

907

y 1100

0 0.620

Code

No.

545200

Zipped Tool Bag

Code

No.

545210

Waist Pouch

0 0.350 0 0.200

AUTOMOTIVE TOOLS

ELECTRICIAN‘S TOOL CASE

TOOL JACKET

› Double stitched and bound. › Very durable water repellent inner lining. › Heavy duty zip. › Reinforced inners.

› High quality tear resistant fabric made from 600D polyester. › Strong industrial seams. › Universal size with four lateral buckles for resizing. › One back pocket with zips. › Two right-hand pockets and four left-hand pockets. › Elastic screwdriver holder. › Reflector strips front and back for improved visibility. TOOLS NOT INCLUDED

See pg. 223 for complete Electrcians Toolset.

Code

No.

545220

Tool case - EMPTY

0 2.25

TOOL RUCKSACK

Code

No.

1818260

Tool Jacket

0 0.730

507 LEISURE MOTORIST TOOLKIT

› 600x600D water repellent polyester fabric. › Double stitched and bound. › 10cf-thick extra heavy duty zip. › Three front velcro-closing pockets with reflective strip. › Inside detachable divider with fabric sleeves to hold tools with clear velcro sleeve cover. › Reinforced padded back with reinforced padded back straps.

› In a black canvas case with zip fastener.

TOOLS NOT INCLUDED

*WHILE STOCKS LAST Code 668097

Contents Spanners Screwdrivers

See pg. 228 for complete Rucksack Toolset.

Code

No.

545190

Rucksack - EMPTY

100

0 1.00

Accessories 26RST x 175 Socket & T-Bar 60CP-250 Shifting Spanner 145/250 Universal Pliers

0 2.36

NO.6 8x9 10x11 12x13 14x15 16x17 19x22 2150 6.5 2160 PH2

Reflective Vest Leather Gloves

5017 JAZZ TOOL ASSORTMENT › Dimensions: L=440 x W=400 x H=100mm. *WHILE STOCKS LAST Code 677010

Contents Spanners Allen Keys Screwdrivers Sockets

Accessories 1993 Z-94 Ratchet 2093 Z-94 Ratchet 2087 Sliding T-Bar 2088 Flexible Extension 2090-4 Extension Voltage Tester 140-2K 137-250 Grip Pliers 8601-500 Ball Pein Hammer

1990-250 Extension 1990-125 Extension 1995 Universal Joint 55/20.8 Spark Plug Spanner 2090-6 Extension 145-250 Universal Pliers 8250 200JC Combination Pliers

0 9.06

Accessories 145-250 Waterpump Pliers 95-200 Flat Cold Chisel Voltage Tester 140-2K 1993U-10T Reversible Ratchet 1987 Sliding T-bar 8601-500 Ball Pein Hammer

8250-200 JC Combination Pliers 8316-200 JC Side Cutters 1990-125 Extension 1990-250 Extension No.62 Adjustable Wrench - 200mm

0 3.86

Accessories 1990/125 Extension 1993U-10K Plastic Ratchet 9534-05 Tape Measure 9930 Torch

0 9.12

No.7 10 11 12 13 14 15 16 17 19 42-88M 2 2.5 3 4 5 6 8 10 2150 3-150 4-150 6.5 2160 PH1 PH2 C19 10 11 12 13 14 15 17 19 22 24 No.20 5 6 7 8 9 10 11 12 13

SORTIMO GENERAL TOOL ASSORTMENT › Dimensions: L=442 x W=357 x H=151mm.

*WHILE STOCKS LAST Code 677001

Contents Allen Keys Screwdrivers Sockets

42-88M 2 2.5 3 4 5 6 8 10 2150 6.5 5.5-150 2160 PH1 PH2 PH3 D19 10 11 12 13 14 15 16 17 18 19 21 22 24

502 MOTORIST TOOLKIT › In a black canvas case with zip fastener and carry strap.

Code 651125

Contents Spanners Screwdrivers Sockets

NO.6 10x11 12x13 14x15 16x17 19x22 2150 6.5 3-150 2160 PH1 PH2 C19 10-3/8 12 13-1/2 17 19-3/4 22

62/200 Adjustable Wrench 145/250 Universal Pliers 4530 Tow Rope – 2-Ton 9999.900 Multifunction Pliers

101

SHEETMETAL & TOOL ASSORTMENTS 102 - 127

102

SHEETMETAL TOOL ASSORTMENTS

TOOLBOXES / TRAYS / TRUNKS ASSORTMENTS / CABINETS 104 107

ARTISANS WORKSTATIONS 116

VICES 117

TOOL PANELS 117

DRAWER UNITS 117

TOOL CHESTS 118

TOOL TROLLEYS 120

MODULAR ASSORTMENTS 122

SHEETMETAL / TOOL ASSORTMENTS

Toolboxes

1260 TOOLBOX 3 compartments › With riveted joins. › Strong structure, smooth and easy opening and closing. › Maximum access to bottom tray. › Lockable, phosphated and powder coated to prevent corrosion. › L=460 x W=248 x H=173mm.

Code

No.

660868 1260

0 4.700

1261 TOOLBOX 5 compartments › With riveted joins. › Strong structure, smooth and easy opening and closing. › Maximum access to bottom tray. › Lockable, phosphated and powder coated to prevent corrosion. › L=460 x W=248 x H=220mm.

Code

No.

660876 1261

0 6.200

1282 / 5 TOOLBOX 5 compartments › With riveted joins. › Strong structure, smooth and easy opening and closing. › Maximum access to bottom tray. › Plastic Handle: ZA Registration Design 2005/0507. › Lockable, phosphated and powder coated to prevent corrosion. › L=460 x W=248 x H=220mm. › Designed to accommodate all modular kits.

Code

No.

660957 1282/5

104

0 7.500

1335 TOOLBOX

TRAYS

5 compartments

› Trays Fit Into: 1280 / 1281 / 1282 Toolboxes

SHEETMETAL TRAYS

Code 561150 561266 561401 561428

› With riveted joins › Strong structure, smooth and easy opening and closing.

› Maximum access to bottom tray. › Lockable, phosphated and

powder coated to prevent corrosion.

No. 1280/81 - Metal Tray 1280/81 - D32 Metal Tray 1282 - Metal Tray 1282 - D32 Metal Tray

INSERTS

› L=550 x W=248 x H=220mm.

VACUUM MOULDED INSERTS

› Inserts Fit Into:

Code

No.

661058 1335

MODULAR ASSORTMENTS

0 6.000

1 22

Code 561347 561134 561169 561142 561126 561185 561193 561207 561215 561258 561274 561283 561291 561304 561312 561322 561339 561355 561363 561371 561398

1281 / 1282 Toolboxes 1575 / 1581 Tool Trolleys 1401 / 1404 Tool Cabinets

1425 Tool Chest 1502 Drawer Unit

No. 1280/81-7M INS 1280/81-1B INS 1280/81-1B AF INS 1280/81-DI9 INS 1280/81-D19ACC INS 1280/81-22-ACC INS 1281/82-1B 62H INS 1280/81-D19/IN19 INS 1280/81-D19 ACC/SKT INS 1280/81-D32/6 INS 1280/81-PL/137/36 INS 1282-SD-PH-STB INS 1282-SD-MEC-EL INS 1282-4/ACC INS 1282 - EXT INS 1282 - 6SD INS 1282 - UTILITY INS 1282 - D20 EZ INS 1282 - PLIER INS 1282 - 1B 18 INS 1282 - 8601 ACC INS

Die-cast Aluminium Toolbox

1281 TOOLBOX 5 compartments › Robust, rust-free, rounded corners. › Cast-in lid hinges with non-removeable pins. Lockable. › Plastic Handle: ZA Registration Design 2005/0507.

› Phosphated and powder coated to prevent corrosion.

› L=460 x W=240 x H=220mm.

Code

No.

660949 1281

0 6.500

105

SHEETMETAL / TOOL ASSORTMENTS

Tool Trunks

1460 TOOL TRUNKS › Strong structure, smooth operating hinges. › Lockable. › Phosphated and powder coated to prevent corrosion. › 1460: Silver galvanized tray is purchased separate. › 1460: Nests.

1460-91

Code

No.

663837 663839 663840 663841 663843 663844 663845

1460-59 1460-65 1460-65S 1460-70 1460-80 1460-80S 1460-91

1425 / 27 / SP MODULAR ASSORTMENT

106

1 23

587 651 651 717 801 801 910

252 284 284 314 379 379 431

203 280 280 388 471 471 554

REF L-PL / 137 / 36 PLASTIC INSERT

0 7.000 7.000 7.000 10.000 14.000 14.000 14.000

1 26

Tool Assortments

1281-C19-1BM TOOL ASSORTMENT

d Die-cast Aluminium

*WHILE STOCKS LAST

Code 678155

No. 1281-C19-1BM

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

42-88M Allen Keys Screwdrivers 2 2,5 3 4 5 6 2150 8 10 4 5.5 6.5 8 2160 PH1 PH2

Toolbox / Inserts / Tray 1281 Toolbox 1280/81 D19 ACC Insert 1280/81 1B Insert 1280/81 D19 Insert 1280/81 Tray

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4

Accessories 50/20.8 Spark Plug Socket 145/250 Universal Pliers 1990-75 Extension 1990-125 Extension 1990-250 Extension 137/250 Grip Pliers 1987 Sliding T-Bar 1993U-10T Rev. Ratchet 1997/375 Power Bar 1995 Universal Joint

Die-cast Aluminium

1281 / 1282-C19-1BM-62 TOOL ASSORTMENT

0 15.860

*WHILE STOCKS LAST

Code 678511 679003

No. 1281-C19-1BM-62 1282-C19-1BM-62

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 IN19 sockets 4-150 5 6 8 10 12 14 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1281 / 1282 Toolbox 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1281 - 1280/81 Tray 1282 - 1282 Tray

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 50/20.8 Spark Plug Socket 143/250 Universal Pliers 1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint 62/250 Adjustable Wrench 1987 Sliding T-Bar 1993U-10T Ratchet

0 16.000 17.000

107

SHEETMETAL / TOOL ASSORTMENTS

1281 / 1282-D19-1BM-62 TOOL ASSORTMENT

Die-cast Aluminium

*WHILE STOCKS LAST

Code 678554 679070

No. 1281-D19-1BM-62 1282-D19-1BM-62

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 IN19 sockets 4-150 5 6 8 10 12 14 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1281 / 1282 Toolbox 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1281 - 1280/81 Tray 1281 - 1282 Tray

1281-D19-1BA-U3 TOOL ASSORTMENT

D19 Sockets 8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32 7/16AF 9/16AF 7/8AF

Accessories 0 50/20.8 Spark Plug Socket 16.000 143/250 Universal Pliers 17.000 1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint 62/250 Adjustable Wrench 1987 Sliding T-Bar 1993U-10T Rev. Ratchet

Die-cast Aluminium

*WHILE STOCKS LAST

Code 678597

No. 1281-D19-1BA-U3

1B Spanners 1/4AF 5/16AF 3/8AF 7/16AF 1/2AF 9/16AF 5/8AF 11/16AF 3/4AF 13/16AF 7/8AF 15/16AF 1. AF

Allen Keys 42-88P 3/32AF 1/8AF 5/32AF 3/16AF 7/32AF 1/4AF 5/16AF 3/8AF IN19 sockets 3/16AF 1/4AF 5/16AF 3/8AF 1/2AF 9/16AF

108

Screwdrivers 2150 3-150 4 4-150 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1281 Toolbox 1280/81-1B AF. Insert 1280/81-D19 ACC Skt Insert 1280/81-D19/IN19 Insert 1280/81 Tray

D19 Sockets 5/16AF 3/8AF 13/32AF 7/16AF 1/2AF 9/16AF 19/32AF 5/8AF 11/16AF 3/4AF 25/32AF 13/16AF 7/8AF 15/16AF 1. AF 1.1/16 1.1/8 1.3/16 1.1/4

Accessories 50/20.8 Spark Plug Socket 142/250 Universal Pliers 137/250 Grip Pliers 702/13 A Feeler Gauge Set 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint 1993U-3 Rev. Ratchet

0 16.220

1282-C19-1BM-62-PL TOOL ASSORTMENT

Code 679240

No. 1282-C19-1BM-62-PL

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 4 5.5 IN19 sockets 6.5 5 6 8 10 12 14 8 2160 PH1 PH2

Toolbox / Inserts / Tray 1282 Toolbox 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert 1282 - 6SD Insert 1282 - Pliers Insert 1282 Tray

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 50/20.8 Spark Plug Socket 62/250 Adjustable Wrench 143/250 Universal Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint 1993U-10T Rev. Ratchet

0 18.500

Pliers 8132-200 JC Telephone Pliers 8250-200 JC Combination Pliers 8316-200 JC Side Cutters

1282-D19-1BM-62-PL TOOL ASSORTMENT

Code 679267

No. 1282-D19-1BM-62-PL

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 4 5.5 IN19 sockets 6.5 5 6 8 10 12 14 8 2160 PH1 PH2

Toolbox / Inserts / Tray 1282 Toolbox 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert 1282 - 6SD Insert 1282 - Pliers Insert 1282 Tray

D19 Sockets 8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32 7/16AF 9/16AF 7/8AF

0 18.500

Pliers 8132-200 JC Telephone Pliers 8250-200 JC Combination Pliers 8316-200 JC Side Cutters

109

SHEETMETAL / TOOL ASSORTMENTS

1282-C19Z-1BM-62 TOOL ASSORTMENT

Code No. 679119 1282-C19Z-1BM-62

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 IN19 sockets 4-150 5 6 8 10 12 14 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1282 Toolbox 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1282 Tray

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 50/20.8 Spark Plug Socket 143/250 Universal Pliers 62/250 Adjustable Wrench 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint 1993Z-94 Ratchet +Coupler

1282-C19-1BMZ-PL-6SD TOOL ASSORTMENT

Plastic inserts

Code No. 679232 1282-C19-1BMZ-PL6SD (plastic inserts) 679408 1282-FM-C19-1BMZPL-6SD (foam inserts)

110

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 4 5.5 6.5 8 2160 PH1 PH2

0 18.500

High-density foam inserts

Toolbox / Inserts / Tray 1282 Toolbox 1280/81-DI9 Insert 1280/81-1B Insert 1282 - EXT Insert 1282 - 6SD Insert 1282 - Pliers Insert 1282 Tray

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4

Accessories 137/250 Grip Pliers 145/250 Universal Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1993Z-94 Ratchet + Coupler Pliers 8132-200 JC Telephone Pliers 8250-200 JC Combination Pliers 8316-200 JC Side Cutters

0 18.000

1282-D19-1BMZ-PL-6SD TOOL ASSORTMENT

Code No. 679259 1282-D19-1BMZPL-6SD

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 4 5.5 6.5 8 2160 PH1 PH2

Toolbox / Inserts / Tray 1282 Toolbox 1280/81-DI9 Insert 1280/81-1B Insert 1282 - EXT Insert 1282 - 6SD Insert 1282 - Pliers Insert 1282 Tray

D19 Sockets 8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32

1282-C19-1BMZ-10SD TOOL ASSORTMENT

Code No. 679135 1282-C19-1BMZ-10SD 679291 1282-D19-1BMZ-10SD

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

0 18.500

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 4-150 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1282 Toolbox 1280/81-DI9 Insert 1280/81-1B Insert 1282 - EXT Insert 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1282 Tray

C19 Sockets (679135) 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 D19 Sockets (679291) 8 10 11 12 13 14 15 16 17 18 19 21 22 24 26 27 29 30 32

Accessories 137/250 Grip Pliers 145/250 Universal Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1993Z-94 Ratchet + Coupler

0 19.500 19.500

111

SHEETMETAL / TOOL ASSORTMENTS

1281-C19/22-1BA-U3 TOOL ASSORTMENT

d Die-cast Aluminium

*WHILE STOCKS LAST

Code No. 678589 1281-C19/22-1BA-U3

1B Spanners 1/4AF 5/16AF 3/8AF 7/16AF 1/2AF 9/16AF 5/8AF 11/16AF 3/4AF 13/16AF 7/8AF 15/16AF 1.AF

Allen Keys 42-88P 3/32AF 1/8AF 5/32AF 3/16AF 7/32AF 1/4AF 5/16AF 3/8AF

Screwdrivers 2150 3-150 4 4-150 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1281 Toolbox 1280/81-1B AF. Insert 1280/81-DI9 Insert 1280/81-22 ACC Insert 1280/81 Tray

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 0 50/20.8 Spark Plug Socket 16.420 137/250 Grip Pliers 141/250 Universal Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1997/375 Power Bar 1995 Universal Joint 1993U-3 Rev. Ratchet

1281/1282-C19/22-1BM-10SD TOOL ASSORTMENT

Die-cast Aluminium

*WHILE STOCKS LAST

Code No. 678538 1281-C19/22-1BM-10SD 679011 1282-C19/22-1BM-10SD

112

1B Spanners Allen Keys Screwdrivers 6 7 8 9 10 11 12 42-88M 2 2,5 3 2150 13 14 15 16 17 18 4 5 6 8 10 3-150 19 20 21 22 4 4-150 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1281/1282 Toolbox 1281/2 1280/81-1B Insert 1280/81-D19 Insert 1280/81-22-ACC Insert 1282 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1280/81 Tray 1282 Tray

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 0 50/20.8 Spark Plug Socket 16.500 137/250 Grip Pliers 18.500 145/250 Universal Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1997/375 Power Bar 1995 Universal Joint 1993U-10T Rev. Ratchet

1281/1282-D19/22-1BM-10SD TOOL ASSORTMENT

Die-cast Aluminium

*WHILE STOCKS LAST

Code No. 678546 1281-D19/22-1BM-10SD 679089 1282-D19/22-1BM-10SD

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 4-150 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1281/1282 Toolbox 1281/2 1280/81-1B Insert 1280/81-D19 Insert 1280/81-22-ACC Insert 1282 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1280/81 Tray 1282 Tray

D19 Sockets 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 30 32

Accessories 50/20.8 Spark Plug Socket 137/250 Grip Pliers 145/250 Universal Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1997/375 Power Bar 1995 Universal Joint 1993U-10T Rev. Ratchet

Die-cast Aluminium

1281/1282-C32/19-1BM-62 TOOL ASSORTMENT

0 16.500 18.500

d e

*WHILE STOCKS LAST

Code No. 678740 1281-C32/19-1BM-62 679038 1282-C32/19-1BM-62

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 IN19 sockets 4-150 5 6 8 10 12 14 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Toolbox / Inserts / Tray 1281/1282 Toolbox 1281/2 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert 1280/81-D32/6 Insert 1282 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1280/81 - D32 Tray 1282 - D32 Tray

C19 / C32 Sockets C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF C32 1.3/8AF 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2.

0 25.500 26.500

113

SHEETMETAL / TOOL ASSORTMENTS

1282-D32/19-1BM-62 TOOL ASSORTMENT

Code No. 679097 1282-D32/19-1BM-62

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 4-150 IN19 5 6 8 10 5.5 12 14 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

d e

Toolbox / Inserts / Tray 1282 Toolbox 1280/81-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 ACC/SKT Insert 1280/81-D32/6 Insert 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1282 - D32 Tray

D19 / D32 Sockets D19 8 10 11 12 13 14 15 16 17 19 21 22 23 24 26 27 28 30 32 7/16AF 9/16AF 7/8AF

Accessories 50/20.8 Spark Plug Socket 62/250 Adjustable Wrench 143/250 Universal Pliers 1987 Sliding T-Bar 1990-75 Extension D32 34 36 38 41 46 50 1990-125 Extension 1990-250 Extension 1995 Universal Joint 1993U-10T Rev. Ratchet 3287/447 Sliding T-Bar 3290-200mm Extension 3290-400mm Extension 3293U-1/440 Rev. Ratchet

0 25.610

Tool Cabinets

1401 / 1401 PRO TOOL CABINET / ASSORTMENT

› Ideal for the professional workshop. › Rigid sheetmetal structure with precision CNC punched pegboard. › Three easy-slide drawers incorporating extra strong ball bearing slide mechanisms. › One moveable tray, spanner and screwdriver rack and an assortment of moveable hanging hooks for maximum flexibility.

› Lockable. › Phosphated to prevent corrosion. Blue and grey powder coated. › L=650 x W=250 x H=970. Code

No.

Accessories

661155 1401 - EMPTY with Accessories Code No. 661163 1401 PRO With Accessories and Tools

114

* Picture for illustration purposes only. Contents/accessories may differ.

30 x Plastic Holders with Pins 1 x Tool Rack: 17-Pin 1 x Screwdriver Rack: 6-Piece 1 x Double Storage Tray 1 x Punch Holder

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 IN19 5 6 8 10 4-150 12 14 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Tool Cabinet 1401 Accessories 30 x Plastic Holders with Pins 1 x Tool Rack: 17-Pin 1 x Double Storage Tray 1 x Screwdriver Rack: 6-Piece 1 x Punch Holder

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 50/20.8 Spark Plug Socket 62/250 Adjustable Wrench 137/250 Grip Pliers 143/250 Universal Pliers 225/250 Pipe Wrench 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1993Z-94 Ratchet + Coupler 1995 Universal Joint 8531/300 Tin Snips 8601/500 Ball Pein Hammer

0 45.000 0 55.000

1401L / 1401L PRO TOOL CABINET / ASSORTMENT

› Ideal for the professional workshop. › Rigid sheetmetal structure with precision CNC punched pegboard.

› Five easy-slide drawers incorporating

extra strong ball bearing slide mechanisms.

› One moveable tray, spanner and screwdriver › › ›

rack and an assortment of moveable hanging hooks for maximum flexibility. Lockable. Phosphated to prevent corrosion. Blue and grey powder coated. L=1300 x W=250 x H=970.

* Picture for illustration purposes only. Contents/accessories may differ.

Code

No.

Accessories

662607 1401L - EMPTY with Accessories Code No. 662608 1401L PRO With Accessories and Tools

1 x Hook 1 Pin: 10-Piece 1 x Double Storage Tray 1 x Tool Rack: 17-Pin 1 x Screwdriver Rack: 10-Piece

Spanners Allen Keys 42-88M 2 2,5 3 1B/17M 6 7 8 9 10 11 12 13 14 15 16 17 4 5 6 8 10 18 19 20 21 22 IN19 5 6 8 10 No.2/11M 6x7 8x9 12 14 10x11 12x13 14x15 16x17 17x19 18x19 42KL-7M 1,5 2 20x22 21x23 24x30 2,5 3 4 5 6 534/9M 10 11 12 13 43TX-9M T7 T8 14 15 16 17 19 T9 T10 T15 T20 T25 T30 T40

ENGINEERING VICE

Screwdrivers 2150 3-150 4 4-150 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Tool Cabinet 1401L Accessories 1 x Hook 1 Pin: 10-piece 1 x Tool Rack: 17-Pin 1 x Double Storage Tray 1 x Screwdriver Rack: 10-Piece

1 17

WORKSTATIONS

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 19-3/4 22 23 24-15/16 26-1. 27-1.1/16 28 30-1.3/16 32-1.1/4

0 90.000 Accessories 0 115.400 43TV Torx® Gauge Tester 403 Hacksaw 9534.05 Tape Measure 9930.000 Torch 1987 Sliding T-Bar 1995 Universal Joint 1990-75 Extension 1990-125 Extension 1990-250 Extension 1993Z-94 PZK Ratchet & Coupler 227/350 Pipe Wrench 1993 U-10K Plastic Ratchet 36/1 Strap Wrench 145/250 Multigrip Pliers 62/300 Adjustable Wrench 8380-250TL Tower Pincers 8516-300 Tin Snips 8601-500 Ball Pein Hammer 106 Tool Punch Set 137/250 Grip Pliers 4611 Power Tester 8132-200JC Telephone Pliers 8316-200JC Side Cutters 8250-200JC Combination Pliers S8000 Circlip Pliers Set 50-20.8 Spark Plug Socket D30 FMZ Socket Set VDE ELS/PH Screwdriver Set

116

115

SHEETMETAL / TOOL ASSORTMENTS

1404 / 1404 PRO TOOL CABINET / ASSORTMENT › Ideal for the professional workshop. › Rigid sheetmetal structure with precision CNC punched pegboard.

› Three easy-slide drawers incorporating

extra strong ball bearing slide mechanisms.

› 80mm-deep doors to accommodate numerous accessories – moveable shelves, hanging rack and screwdriver rack.

› Doors: ZA Registered Design – A2006/01314 & F2006/01315. › Lockable. › Phosphated to prevent corrosion. Blue and grey powder coated. › L=650 x W=345 x H=970. Code

No.

* Picture for illustration purposes only. Contents/accessories may differ.

Accessories

662976 1404 - EMPTY with Accessories

30 x Plastic Holders with Pins 1 x Tool Rack: 17-Pin 1 x Tool Rack: 6-Pin 6 x Small Storage Trays 2 x Large Storage Trays 1 x Screwdriver Rack

0 47.000

*WHILE STOCKS LAST Code No. 663115 1404 PRO * With Accessories and Tools

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Allen Keys Screwdrivers 42-88M 2 2,5 3 4 2150 5 6 8 10 3-150 4 IN19 5 6 8 10 4-150 12 14 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Tool Cabinet 1404 Accessories 30 x Plastic Holders with Pins 1 x Tool Rack: 6-Pin 1 x Tool Rack: 17-Pin 2 x Large Storage Trays 6 x Small Storage Trays 1 x Screwdriver Rack

C19 Sockets 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 0 55.000 50/20.8 Spark Plug Socket 62/250 Adjustable Wrench 137/250 Grip Pliers 143/250 Universal Pliers 225/250 Pipe Wrench 403 Hacksaw 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1993Z-94 Ratchet + Coupler 1995 Universal Joint 9534.05 Tape Measure 8132-200 JC Telephone Pliers 8250-200 JC Combination Pliers 8316-200 JC Side Cutters 8531/300 Tin Snips 8601/500 Ball Pein Hammer

Workstations / Vices / Drawer Units / Tool Panels

1500W / 1500M ARTISAN WORKSTATION › Ideal for the professional workshop or DIY enthusiast.

Wooden Top

Galvanised Metal Top

Drawer unit not included Code

No.

Surface

663166 663174 663182 663557 663565 663573

1500-12 W 1500-15 W 1500-20 W 1500-12 M 1500-15 M 1500-20 M

Wooden Wooden Wooden Galvanised Metal Galvanised Metal Galvanised Metal

116

L 1200 mm 1500 mm 2000 mm 1200 mm 1500 mm 2000 mm

W 700 mm 700 mm 700 mm 700 mm 700 mm 700 mm

H 900 mm 900 mm 900 mm 900 mm 900 mm 900 mm

0 34.000 43.900 53.000 47.800 53.200 59.000

MV100 / MV150 , MECHANIC S VICE

EV150 / EV200 ENGINEERING VICE

› All steel construction. › Cast iron nut on spindle. › Robotic welded construction. › Steel anvil block.

› Heavy duty engineering vice. › All steel robot welded construction. › Robust sturdy design which can withstand hammer strikes. › Replaceable spindle and nut, the nut being virtually unbreakable. › Replaceable jaw plates, which are serrated for better grip. › Jaw inserts case hardened to between 540-650 HV (52-57 Rockwell). › Proof load kn (kiloNewton): 150mm-54kN 200mm-90kN. › Tensile strength of handle – 425 MPa – complies with SANS 6892.

Code 6500640 6500720

No. MV-100mm MV-150mm

O 125 175

y 100 150

0 7.600 13.400

MV100 / MV150 SPARES

Code 3351150G 3350200G

No. EV-150mm EV-200mm

O 175 225

y 150 200

0 25.000 45.500

EV150 / EV200 SPARES

Code

No.

Code

No.

7400001 7400002 7400100 7400150

MV-100mm Jaw Set Insert MV-150mm Jaw Set Insert MV-100mm Spindle & Nut Set MV-150mm Spindle & Nut Set

7500001 7500002 7500004 7500005 7500006 7500003

EV-150mm Jaw Set Insert EV-200mm Jaw Set Insert EV-150mm & EV-200mm Spring EV-150mm & EV-200mm Handle EV-150mm & EV-200mm Spindle Only EV-150mm & EV-200mm Nut Only

1502 DRAWER UNITS

1450S TOOL PANEL

› Sheetmetal drawer units for 1500 workbenches.

› Ideal for the professional workshop or DIY enthusiast. › Rigid sheetmetal pegboard structure. › Numerous accessory options available. › Phosphated to prevent corrosion. › Grey powder coated. › L=570 x W=20 x H=1010mm.

* Tools not included. Code 663506 663522

No. 1502 / 2 1502 / 3

565 565

395 395

365 365

0 18.500 19.200

Code 663123 663352 Accessories

No. 1450S - Pegboard Only 1450S - With Accessories (Tools Not Included) 1 x PA-H3 Tool Rack: 17-Pin 10 x PA-H1 Hook: 1-Pin

0 4.900 5.200

117

SHEETMETAL / TOOL ASSORTMENTS

Pegboard Accessories › The following accessories are for the 1401, 1401L, 1404 and 1450S

Code

F Code

No. PA-H1 Hook: 1-Pin, 10-Piece PA-H2 Tool Rack: 6-Pin PA-H3 Tool Rack: 17-Pin PA-T1 Small Storage Tray PA-T2 Large Storage Tray PA-T3 Double Storage Tray

664111 664014 664022 664030 664049 664057

A B C D E F

664065 664138

Contents

No. PA-T4 Screwdriver Rack - Holds 11 Screwdrivers PA- Starter Pack

10 x PA-H1 Hook: 1-Pin 1 x PA-H3 Tool Rack: 17-Pin 1 x PA-T4 Screwdriver Rack - Holds 11 Screwdrivers 1 x PA-T3 Double Storage Tray

Tool Chests / Assortments

b d

1425 / 3 TOOL CHEST / ASSORTMENT › Four-compartment sheetmetal tool chest. › Lockable. › Three easy-slide drawers, incorporating full extension ball bearing slide mechanisms. › Drawer latch incorporated into each drawer. › Strong structure, smooth operating hinges. › Retractable spring-loaded handles. › Load capacity per drawer 35kg. › Phosphated and powder coated to prevent corrosion. › High-density foam inserts. › L=687 x W=400 x H=362mm. Code

No.

0 35.500

660963 1425 / 3 Tool Chest - EMPTY Code

No.

660967 1425 / 3 Workshop With Tools

118

Tool Chest 1425 / 3

1425/41/1B Foam Insert 1B 6-24 Spanners (18) 60CP-250 Shifting Spanner

1425/41/D19 Foam Insert C19 8-32 Sockets (24) No.50/20.8 Spark Plug SKT 1987 Sliding T-Bar IN19 5-19 Sockets (10) TX19 E10-24 Sockets (8) 1990/75mm Extension 1990/125mm Extension 1990/250mm Extension

1425/27/SP Foam Insert ITX19 T20-T50 Sockets (7) No.20 4-13 Sockets (11) 2093Z/94 Ratchet + Coupler 2090/4 Extension 2098 Driving Handle 1993-U10T Rev. Ratchet 1997/375mm Swivel Handle 1995 Universal Joint

2150 8 (Mechanic’s S/D) 2150 6.5 (Mechanic’s S/D) 2150 4-150 (Electrician’s S/D) 2150 6.5-200 (Electrician’s S/D) 2160 PH1 (Phillips S/D) 2160 PH2 (Phillips S/D) 2160 PH3 (Phillips S/D) 42/88M Allen Key Set

8132/200 Telephone Pliers 8250/200 Combination Pliers 8316-200 Side Cutters 137/250 Vice Grip 145/250 Universal Pliers 43TX/09 TORX® Allen Key Set

43.500

b d

1425 / 5 TOOL CHEST / ASSORTMENT › Six-compartment sheetmetal tool chest. › Lockable. › Five easy-slide drawers, incorporating full extension ball bearing slide mechanisms. › Drawer latch incorporated into each drawer. › Strong structure, smooth operating hinges. › Can be stacked on 1525 tool trolley. › Retractable spring-loaded handles. › Load capacity per drawer 35kg. › Phosphated and powder coated to prevent corrosion. › High-density foam inserts. › L=687 x W=400 x H=491mm.

Code

No.

0 35.500

660965 1425 / 5 Tool Chest - EMPTY

Code No. Tool Cabinet 1425/41/1B Foam Insert 660969 1425 / 5 1425 / 5 1B 6-24 Spanners (18) Comprehensive 60CP-250 Shifting Spanner With Tools

1425/41/D19 Foam Insert C19 8-32 Sockets (24) 50/20.8 Spark Plug SKT 1987 Sliding T-Bar IN19 5-19 Sockets (10) TX19 E10-24 Sockets (8) 1990/75mm Extension 1990/125mm Extension 1990/250mm Extension ITX19 T20-T50 Sockets (7) No.20 4-13 Sockets (11) 2093Z/94 Ratchet + Coupler 2090/4 Extension 2098 Driving Handle 1993-U10T Rev. Ratchet 1997/375mm Swivel Handle 1995 Universal Joint

1425/27/PL Foam Insert 8000/A21 Circlip Pliers 8000/J21 Circlip Pliers 8000/A2 Circlip Pliers 8000/J2 Circlip Pliers 137/250 Vice Grip 145/250 Universal Pliers 8132/200 JC Telephone Pliers 8250/200 JC Combination Pliers 8316-200 JC Side Cutters 42/88M Allen Key Set 43TX/09 TORX® Allen Key Set

1425/27/SD Foam Insert 2150 4-150 6.5 6.5-200 8 2153 5.5 2160 PH1 PH2 PH3 2161 PH2 No.400 8 x 10 Flare Nut Spanner No.400 11 x 13 Flare Nut Spanner No.400 12 x 14 Flare Nut Spanner No.400 17 x 19 Flare Nut Spanner No.400 22 x 24 Flare Nut Spanner 26R Tubular Box Spanners - 8x9 10x11 12x13 14x15 26RS/2 Stepped Tommy Bar

1425/27/HM Foam Insert 403 Hacksaw 9000.00 Digital Vernier 702/21M Feeler Gauge Set 9100 Utility Knife 9534.05 Tape Measure 248ST/40 Recoil Free Hammer 8601/500g Hammer 106 Chisel & Punch Set (6-Piece) 95/200 Flat Chisel

0 59.500

1410 ARTISAN‘S TOOL CHEST › Four-drawer sheetmetal tool chest. › Lockable. › Strong structure, full extension ball bearing slides. › Rubber anti-slip mats in each drawer. › Drawer latch incorporated into each drawer. › Can be stacked on 1510 tool trolley and other 1410 tool chests. › Retractable spring-loaded handles. › Phosphated and powder coated to prevent corrosion. › Load capacity per drawer 35kg. › L=574 x W=417 x H=384mm.

Code 660817

No. 1410

0 23.000

119

SHEETMETAL / TOOL ASSORTMENTS

Tool Trolleys / Assortments

1510 TOOL TROLLEY / ASSORTMENT

› Ideal for the professional workshop. › Rigid sheetmetal structure. › Five standard and one deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms. › Central drawer locking mechanism. › Two swivel castors (one with safety brake) for maximum mobility and safety. › Handle for easy manoeuvrability. › Load capacity of 300kg. › Load capacity per drawer 35kg. › Blue and grey powder coated. › Drawer latch incorporated into each drawer. › L=651 x W=585 x H=877mm.

Code

No.

662792 1510 Trolley - EMPTY

0 48.000

*WHILE STOCKS LAST Code No. 661310 1510 * Classic With Tools

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

1410 + 1510 CONCEPT

Allen Keys Screwdrivers 42-88M 2 2,5 3 2150 4 5 6 8 10 3-150 4 4-150 IN19 5 6 8 10 5.5 12 14 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Trolley / Inserts / Tray 1510 Tool Trolley 1281/82-1B62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 Acc/Skt Insert 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1280/81-PL/137/36 Insert 1581 Filler

1410

1510

120

C19 Sockets C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 165/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 0 36/1 Oil Filter Strap Wrench 60.000 62/250 Adjustable Wrench 143/250 Universal Pliers 50/20.8 Spark Plug Socket 137/250 Grip Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1993U-10T Rev. Ratchet 1995 Universal Joint 8000-A2 Circlip Pliers 8000-J2 Circlip Pliers 8250-200 JC Combination Pliers 8132-200 JC Telephone Pliers 8316-200 JC Side Cutters

1525 TOOL TROLLEY / ASSORTMENT › Ideal for the professional workshop. › Rigid sheetmetal structure. › Five standard and two deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms. › Central drawer locking mechanism. › Two swivel castors (one with safety brake) for maximum mobility and safety. › Handle for easy manoeuvrability. › Load capacity of 300kg. › Load capacity per drawer 35kg. › Blue and grey powder coated. › Drawer latch incorporated into each drawer. › L=758 x W=602 x H=914mm.

Code

No.

0 55.000

662794 1525 Tool Trolley - EMPTY

Code No. Tool Trolley 661325 1525 1525 Comprehesive With Tools

1425 + 1525 CONCEPT

1425/41/1B Foam Insert 1B 6-24 Spanners (18) 60CP-250 Shifting Spanner

1425/41/D19 Foam Insert C19 8-32 Sockets (24) No.50/20.8 Spark Plug SKT 1987 Sliding T-Bar IN19 5-19 Sockets (10) TX19 E10-24 Sockets (8) 1990/75mm Extension 1990/125mm Extension 1990/250mm Extension ITX19 T20-T50 Sockets (7) No.20 4-13 Sockets (11) 2093Z/94 Rev. Ratchet 2098 Driving Handle 1993-U10T Rev. Ratchet 1997/375mm 1995 Universal Joint

1425/27/PL Foam Insert 8000/A21 Circlip Pliers 8000/J21 Circlip Pliers 8000/A2 Circlip Pliers 8000/J2 Circlip Pliers 137/250 Vice Grip 145/250 Universal Pliers 8132/200JC Telephone Pliers 8250/200JC Combination Pliers 8316-200 JC Side Cutters 42/88M Allen Key Set 43TX/09 TORX® Allen Key Set

1425/27/SD Foam Insert 2150 4-150 6.5 6.5-200 8 2153 5.5 2160 PH1 PH2 PH3 2161 PH2 400 8 x 10 Flare Nut Spanner 400 11 x 13 Flare Nut Spanner 400 12 x 14 Flare Nut Spanner 400 17 x 19 Flare Nut Spanner 400 22 x 24 Flare Nut Spanner 26R Tubular Box Spanners - 8x9 10x11 12x13 14x15 26RS/2 Stepped Tommy Bar

1425/27/HM Foam Insert 403 Hacksaw 9000.00 Digital Vernier No.702/21M FeelerGauge Set 9100.00 Utility Knife 9534.05 Tape Measure 248ST/40 Recoil FreeHammer 8601/500g Ball PeinHammer 106 Chisel & PunchSet (6-Piece) 95/200 Flat Chisel

0 84.400

1425

1525

121

SHEETMETAL / TOOL ASSORTMENTS

1581 TOOL TROLLEY / ASSORTMENT

› Ideal for the professional workshop. › Rigid sheetmetal structure with pegboard back. › Six standard and one deep easy-slide drawers incorporating extra strong ball bearing slider mechanisms. › Working platform with three compartments for small parts. Raised edges. › Central drawer locking mechanism. › Two swivel castors (one with safety brake) for maximum mobility and safety. › Handle for easy manoeuvrability. › Load capacity of 300kg. › Load capacity per drawer 35kg. › Blue and grey powder coated. › Drawer latch incorporated into each drawer. › L=635 x W=495 x H=932mm. Code

No.

0 56.000

662801 1581 Trolley - EMPTY

Code No. 661306 1581 Classic With Tools

1B Spanners Allen Keys 6 7 8 9 10 11 12 13 42-88M 2 2,5 3 14 15 16 17 18 19 4 5 6 8 10 20 21 22 IN19 5 6 8 10 12 14

Screwdrivers 2150 3-150 4 4-150 5.5 6.5 8 2153 5.5 2160 PH1 PH2 2161 PH2

Trolley / Inserts / Tray 1581 Tool Trolley 1281/82-1B/62 Insert 1280/81-D19/IN19 Insert 1280/81-D19 Acc/Skt Insert 1282-SD-PH-STB Insert 1282-SD-MEC-EL Insert 1280/81-PL/137/36 Insert 1581 Filler Insert

C19 Sockets C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 301.3/16 32-1.1/4 7/16AF 9/16AF 7/8AF

Accessories 0 68.000 36/1 Oil Filter Strap Wrench 62/250 Adjustable Wrench 143/250 Universal Pliers 50/20.8 Spark Plug Socket 137/250 Grip Pliers 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1993U-10T Rev. Ratchet 1995 Universal Joint 8000-A2 Circlip Pliers 8000-J2 Circlip Pliers 8250-200 JC Combination Pliers 8132-200 JC Telephone Pliers 8316-200 JC Side Cutters

Modular Assortments › All assortments are packed in a high-density foam insert that will fit into an appropriate compartment of the 1425 / 3, 1425 / 5 Tool Chest and 1525 Comprehensive Kit.

1425 / 41 / D19

Code

No.

663023 1425/41/D19 Contents C19 8-32 Sockets (24) 1987 Sliding T-Bar 1990/75mm Extension 1990/125mm Extension 1990/250mm Extension 1995 Universal Joint

122

2098 Driving Handle 1993-U10T Rev. Ratchet 1997/375mm Swivel Handle 2090/4 Extension 2093Z-94 Ratchet + Coupler 1425/41/D19 Foam Insert

1425 / 41 / 1B

0 7.820 50/20.8 Spark Plug SKT IN19 5-19 Sockets (10) TX19 E10-24 Sockets (8) ITX19 T20-50 Sockets (7) No.20 4-13 Sockets (11)

Code

No.

663024 1425/41/1B Contents 1B 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 1425/41/1B Foam Insert 60CP-250 Shifting Spanner

0 3.210

1425 / 27 / SP

Code

No.

663037 1425/27/SP Contents 2150 4-150 (Electrician’s) 2150 6.5-200 (Electrician’s) 2150 6.5 (Mechanic’s) 2150 8 (Mechanic’s) 145/250 Universal Pliers

2160 PH1 (Phillips) 2160 PH2(Phillips) 2160 PH3 (Phillips) 42/88M Allen Key Set 1425/27/SP Foam Insert

1425 / 27 / PL

0 3.170 8132/200 Telephone Pliers 8250/200 Combination Pliers 8316-200 JC Side Cutters 137/250 Vice Grip 43TX/09 TORX® Allen Key Set

1425 / 27 / HM

Code

No.

663036 1425/27/HM Contents 403 Hacksaw 106 Chisel & Punch Set 9534.05 Tape Measure 1425/27/HM Foam Insert

0 4.070 9000.00 Digital Vernier 248ST/40 Recoil Free Hammer 8601/500g Ball Pein Hammer No.702/21M Feeler Gauge Set 9100.00 Utility Knife 95/200 Flat Chisel

1425 / 3 / 5 SPARES

Code

No.

663025 1425/27/PL Contents 8000/A21 Circlip Pliers 8000/J21 Circlip Pliers 8000/A2 Circlip Pliers 8000/J2 Circlip Pliers

137/250 Vice Grip 145/250 Universal Pliers 1425/27/PL Foam Insert 8132/200JC Telephone Pliers

0 3.250 8250/200JC Combination Pliers 8316-200 JC Side Cutters 42/88M Allen Key Set 43TX/09 TORX® Allen Key Set

1425 / 27 / SD

Code

No.

663035 1425/27/SD Contents 2150 4-150 6.5 6.5-200 8 2153 5.5 2160 PH1 PH2 PH3 2161 PH2 26RS-2 Stepped Tommy Bar 1425/27/SD Foam Insert

ARTISAN‘S TOOLKITS

0 2.150 No.400 8 x 10 Flare Nut Spanner No.400 11 x 13 Flare Nut Spanner No.400 12 x 14 Flare Nut Spanner No.400 17 x 19 Flare Nut Spanner No.400 22 x 24 Flare Nut Spanner 26R - 8x9 10x11 12x13 14x15

2 04

› Foam inserts are not covered by the GEDORE guarantee and may be subject to degradation as well as wear and tear. Replacement foam inserts can therefore be purchased separately. Code

No.

562860 562865 562870 562875 562880 562885

1425 / 41 / D19 1425 / 41 / 1B 1425 / 27 / PL 1425 / 27 / SD 1425 / 27 / HM 1425 / 27 / SP

123

SHEETMETAL / TOOL ASSORTMENTS

Modular Assortments â&#x20AC;º Toolbox, Tool Cabinet, Tool Trolley and Modular Assortments.

REF A-C19/22/ACC

Code No. / Insert Sockets 662208 REF A-C19/22/ACC C19 7/16AF Insert 9/16AF 7/8AF 1280/81-22-ACC

REF C-1B

Accessories 50/20.8 Spark Plug Socket 1990-75 Extension 1990-125 Extension 1990-250 Extension 1997/375 Power Bar 1987 Sliding T-Bar 1995 Universal Joint

0 2.370

Sockets C19 8-5/16 10-3/8 11 12 13-1/2 14 15-19/32 16-5/8 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4

Accessories 1993U-10T Rev. Ratchet

0 2.710

REF RF-C19/Z94

Code No. / Insert 663086 REF RF-C19/Z94

124

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Accessories 137/250 Grip Pliers 145/250 Universal Pliers 42/88M Allen Key Set

0 4.100

Accessories 137/250 Grip Pliers 145/250 Universal Pliers 42/88M Allen Key Set

0 3.960

REF SF-1B/145

REF B-C19

Code No. / Insert 662216 REF B-C19 Insert 1280/81-D19

Code No. / Insert/Tray 662224 REF C-1B Insert 1280/81-1B Metal Tray 1280/81

Sockets Accessories C19 8-5/16 10-3/8 11 12 1993 Z-94 Ratchet + 13-1/2 14 15-19/32 16-5/8 Coupler 17 18-11/16 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4

Code No. / Insert/Tray 663087 REF SF-1B/145 Insert 1280/81-1B Metal Tray 1282

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

REF D-C19/IN19

0 2.330

Code No. / Insert 662232 REF D-C19/IN19 Insert 1280/81-D19/IN19

Sockets Allen Key Sockets C19 8-5/16 10-3/8 11 12 13-1/2 IN19 5 6 8 10 14 15-19/32 16-5/8 17 18-11/16 12 14 19-3/4 21-13/16 22 24-15/16 26-1. 27-1.1/16 29-1.1/8 30-1.3/16 32-1.1/4

0 2.670

REF E-1B/62

Code No. / Insert 662240 REF E-1B/62 Insert 1281/82-1B/62 Metal Tray 1280/81

1B Spanners 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

REF H-D19/22/ACC

Accessories 62/250 Adjustable Wrench 143/250 Universal Pliers 42/88M Allen Key Set

0 4.120

REF F-D19/ACC/SKT

Code No. / Insert Sockets 662259 REF F-D19/ACC/SKT D19 7/16AF Insert 9/16AF 7/8AF 1280/81-D19 ACC/SKT

Accessories 50/20.8 Spark Plug SKT 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint 1993U-10T Rev. Ratchet

Sockets C32 1.3/8AF 36-1.7/16 38-1.1/2 41-1.5/8 46-1.13/16 50-2.

Accessories 50/20.8 Spark Plug Socket 1987 Sliding T-Bar 1990-75 Extension 1990-125 Extension 1990-250 Extension 1995 Universal Joint 1997/375 Power Bar

0 2.360

REF I-D19

0 2.180

REF G-C32/6

Code No. / Insert 662267 REF G-C32/6 Insert 1280/81-D32/6

Code No. / Insert Sockets 662275 REF H-D19/22/ACC D19 9 18 20 Insert 1280/81-22-ACC

Code No. / Insert 662283 REF I-D19 Insert 1280/81-D19

Sockets Accessories D19 8 10 11 12 1993U-10T Rev. Ratchet 13 14 15 16 17 19 21 22 24 26 27 28 29 30 32

0 2.360

REF J-D19/IN19

Accessories 3287/447 Sliding T-Bar 3290-200 Extension 3290-400 Extension 3293U-1/440 Rev. Ratchet

0 8.700

Code No. / Insert 662291 REF J-D19/IN19 Insert 1280/81-D19/IN19

Sockets D19 8 10 11 12 13 14 15 16 17 18 19 21 22 24 26 27 29 30 32

Allen Key Sockets IN19 5 6 8 10 12 14

0 2.720

125

SHEETMETAL / TOOL ASSORTMENTS

REF K-D32/6

Code No. / Insert 662321 REF K-D32/6 Insert 1280/81-D32/6

REF-10SD

Sockets D32 1.3/8AF 36 38 41 46 50

Accessories 3287/447 Sliding T-Bar 3290-200 Extension 3290-400 Extension 3293U-1/440 Rev. Ratchet

0 8.710

REF L-PL/137/36

Code No. / Insert 662356 REF L-PL/137/36 Insert 1280/81PL137/36

Pliers/Circlip Pliers Accessories Pliers 36/1 Strap Wrench 8132/200 JC Telephone Pliers 137/250 Grip Pliers 8250/200 JC Universal Pliers 8316/200 JC Side Cutters Circlip Pliers 8000-A2 8000-J2

126

Pliers 8132/200 JC Telephone Pliers 8250/200 JC Universal Pliers 8316/200 JC Side Cutters

2150 2153 4 5.5 6.5 8 5.5 3-150 4-150

2160 PH1 PH2

2161 PH2

0 1.830

REF N-10

0 2.390

REF M/MF-PL/81/82/83

Code No. / Insert 662941 REF M-PL/81/82/83 Ass. 663082 REF MF-PL/81/82/83 Ass. Insert 1282-Pliers

Code Description 662348 10SD

Code Insert 2150 662968 1282-2161 ELS+PH 4 5.5 6.5 8 1282-2150 MEC 3-150 4-150

2153 5.5

2160 PH1 PH2

2160

2161

2161 PH2

0 2.100

REF WF/VF

0 2.700 2.010

Code Inserts 663092 REF WF-2153 663091 REF VF-2161

2150 4 5.5 6.5 8 3-150 4-150

PH1 PH2

PH2

2153 5.5

0 0.580 0.450

REF 0-6SD

Code

REF PF-4 EXT T-BAR

No.

2150

2160

663018 REFO-6SD Insert 1282-6SD 3C

4 5.5 6.5 8

PH1 PH2

1.780

REF OF

Code

No.

663083 REF OF-6SD Insert REF OA-2150-6SD Foam Insert

Accessories 1990-75 Extension 1990-125 Extension 1990-250 Extension 1987 Sliding T-Bar

0 1.080

Accessories 1990-75 Extension 1990-250 Extension 1995 Universal Joint 1997-375 Swivel Handle

0 1.300

Accessories 1990-75 Extension 1990-250 Extension 1995 Universal Joint 1997-375 Swivel Handle

0 1.300

REF Q-4

2150

2160

4 5.5 6.5 8

PH1 PH2

0.730

REF P-4 EXT T-BAR

Code No. / Insert 663020 REF P-4 Ext – T-bar Ass Insert 1282 EXT

Code No. / Insert 663084 REF PF-4 Ext – T-bar Ass Insert Foam

Accessories 1990-75 Extension 1990-125 Extension 1990-250 Extension 1987 Sliding T-Bar

Code No. / Insert 663022 REF Q-4 ACC – Power Bar Ass. Insert 1282-4 ACC.

REF QF-4

0 1.100

Code No. / Insert 663085 REF QF-4 ACC – Power Bar Ass. Insert Ref Q 1997

127

STRIKING TOOLS 128 - 133

128

HAMMERS, CHISELS, PUNCHES SETS

RECOIL FREE HAMMERS 130

BALL PEIN HAMMERS 130

CHISELS 130

HAND GUARD 130

CENTRE PUNCHES 130

CHISEL & PUNCH SET 131

PUNCH SETS 131

PUNCH NUMBER/LETTER SET SLEDGE HAMMERS

131

133

HAMMERS / STRIKING TOOLS

Hammers / Striking Tools

NEW

248 ST RECOIL-FREE HAMMERS

› Drop forged. › Striking faces induction hardened

› Splinter-proof, shatter-proof and wear› ›

resistant polymide heads. Powder coated with silver hammer-effect enamel. Robust and durable steel tube handle.

Code

No.

8828950 8829170 8829250 8829330 8830260 8830420 8830500 8830690

248 ST 30mm 248 ST 40mm 248 ST 50mm 248 ST 60mm E 248 / 30 Replacement Head (1 Piece) E 248 / 40 Replacement Head (1 Piece) E 248 / 50 Replacement Head (1 Piece) E 248 / 60 Replacement Head (1 Piece)

8601 BALL PEIN HAMMERS and precision ground

y 295 305 315 340

0 0.600 0.800 1.005 1.800 0.015 0.031 0.050 0.090

› Blue epoxy powder coated. › In accordance with SANS 387. › Hardwood handles. Code

No.

676381 676403 676411 676438 676446 676519 676527

8601 / 100 8601 / 200 8601 / 300 8601 / 500 8601 / 700 8601 / 900 8601 / 1100

y 280 310 325 370 375 400 410

95 FLAT COLD CHISELS

96 CROSS-CUT CHISELS

› Made from Chrome Molybdenum Vanadium air hardened

›

› Carefully hardened and tempered along the

› ›

45CrMoV7 steel, in accordance with DIN 6453. Carefully hardened and tempered along the full length. Striking head induction tempered to prevent shattering. Working edge polished and clear varnished, free of burrs.

Code

No.

8698640 8698720 8698800 8698990 8699100 8699370 8700640

95 - 125 95 - 150 95 - 175 95 - 200 95 - 250 95 - 300 95 HS-300 with guard

45CrMoV7 steel, in accordance with DIN 6451.

full length.

› Striking head induction tempered to prevent shattering. › Working edge polished and clear varnished, free of burrs.

Tip 15mm 18mm 21mm 24mm 28mm 30mm 30mm

y 125 150 175 200 250 300 300

0 0.125 0.225 0.270 0.270 0.480 0.700 0.860

Code

No.

8702180 8702260 8702340 8702420 8702500 8702770

96 - 125 96 - 150 96 - 175 96 - 200 96 - 250 96 - HS-250 with guard

108 UNI HAND GUARD

100 CENTRE PUNCHES

› Made from PVC. › Ergonomic design. › Rectangular shape ensures no rolling away. › Optimum hold – avoids hand fatigue and injuries. › For use with 95, 2095 and 2096 chisels.

› Made from Chrome Molybdenum Vanadium › › ›

Code

No.

8658500

108 UNI

130

0 0.160 0.320 0.420 0.610 0.840 1.140 1.240

0 0.160

y 125 150 175 200 250 250

0 0.140 0.220 0.270 0.380 0.535 0.695

y 120 120 150 150

0 0.060 0.095 0.120 0.240

air hardened 45CrMoV7 steel, in accordance with DIN 7250. Hardened and tempered along the full length. Striking head induction tempered to prevent shattering. Working edge polished and clear varnished.

Code

No.

8721050 8721130 8721210 8721480

100 - 10 100 - 12 100 - 15 100 - 16

Tip 4mm 5mm 5mm 8mm

99 DRIFT PUNCHES

106 CHISEL & PUNCH SET

› Made from Chrome Molybdenum Vanadium air hardened

6 pieces

› ›

› Made from Chrome Molybdenum Vanadium air

›

45CrMoV7 steel, in accordance with DIN 6458. Hardened and tempered along the full length. Striking head induction tempered to prevent shattering. Working edge polished and clear varnished.

hardened 45CrMoV7 steel.

› Hardened and tempered along the full length. › Striking head induction tempered to prevent shattering.

› Working edge polished and clear varnished. › Comes in a PVC stand. Code

No.

8708700 8708970 8709190 8711170 8711330 8711410 8711680 8711760

99 99 99 99 99 99 99 99

y 120 120 120 120 120 120 120 120

10-1 10-2 10-3 12-4 12-5 12-6 12-7 12-8

0 0.060 0.060 0.060 0.090 0.090 0.090 0.100 0.105

Code 8725200

No.

Contents

106

97 - 125 97 - 150 98 - 125 99 - 12-3 100 - 10 119 - 4

0.550

113 DRIFT PUNCH SET

116 PIN PUNCH SET

6 pieces

› Made from Chrome Molybdenum Vanadium air

› ›

› Hardened and tempered along the full length. › Striking head induction tempered to prevent

› ›

hardened 45CrMoV7 steel. Hardened and tempered along the full length. Striking head induction tempered to prevent shattering. Working edge polished and clear varnished. Comes in a PVC stand.

Code 8753680

hardened 45CrMoV7 steel. shattering.

› Working edge polished and clear varnished. › Comes in a PVC stand.

No.

Contents

113

99 - 10-1 99 - 10-2 99 - 10-3 99 - 12-4 99 - 12-5 100 - 10

0 0.450

Code 8757670

No. 116 A

Contents 119 - 3 119 - 4 119 - 5 119 - 6 119 - 7 119 -8

2200 NUMBER SET

2201 LETTER SET

› 6mm print height. 9 numbers. › To label finished parts such as signs, tools etc. › In blue plastic box. › Made from hardened steel, with hardened handle and

› 6mm print height. 27 letters. › To label finished parts such as signs, tools etc. › In blue plastic box. › Made from hardened steel, with hardened handle and

tempered striking head to prevent shattering.

Code

No.

8605140

2200 - 6

0 0.510

tempered striking head to prevent shattering.

0 0.300

Code

No.

8605220

2201 - 6

0 1.30

131

HAMMERS / STRIKING TOOLS

SLEDGE HAMMER Developed in 1975 to withstand the rigorous hard rock mining conditions with hard hitting power that delivers more than 36 000 strikes smoothly and efficiently.

Forged head Superior grain structure. Striking faces hardened to 50-58HRC.

Locked-in lanyard hole Totally safe attachment. Ergonomic shape Handle is shaped to provide a comfortable and safe grip.

Thickened boss Further protects the hammer from overstrikes.

High tensile steel rods High strength rubber-to-metal bonding makes the handle extremely strong.

Non-slip grip Secure grip in both wet and dry conditions. Positive locking plate Head will not seperate from the handle.

Sledge / Club Hammers

620C CLUB HAMMERS › Handle contains high tensile steel rods moulded in abrasive-resistant rubber ensuring outstanding durability. › Locking plate design ensures head will not seperate from the handle. › The abrasive-resistant rubber is injected all the way into the eye of the hammer head. › Superior quality rubber handle provides excellent grip in wet and dry conditions allowing for versatility and safety. › Hammer head hardened to 50-58HRC and conforms to ANSI, BS876 & ISO15601 Specifications. Applications: Mining, Construction, Steelwork, Fencing, Electrical Engineering, Chiseling and Chasing, Surveying

Code

No.

676530 620C Club Hammer 676531 620C Club Hammer

132

y 0 250 1.10 250 1.80

Impact absorbing handle Heavy duty rubber cushions impact, thereby reducing fatigue and injury.

640S SLEDGE HAMMERS

622C COPPER SLEDGE HAMMERS

› Handle core contains high tensile steel rods moulded in abrasive-resistant rubber ensuring

› Handle contains high tensile steel rods moulded in abrasive-resistant rubber ensuring

› › ›

› Superior quality rubber handle provides excellent grip in wet and dry conditions

›

outstanding durability. Locking plate design ensures head will not seperate from the handle. The abrasive-resistant rubber is injected all the way into the eye of the hammer head. Superior quality rubber handle provides excellent grip in wet and dry conditions allowing for versatility and safety. Hammer head hardened to 50-58HRC and conforms to ANSI, BS876 & ISO15601 Specifications.

No.

676532 640S Steel Sledge Hammer 676533 640S Steel Sledge Hammer

allowing for versatility and safety.

› Head 99.98% copper reduces damage to workpieces and reduces chance of sparking in hazardous areas.

Applications: Mining, Petrochemical, Engineering, Toolmaking

Applications: Mining, Building & Construction, Demolition, Heavy Industry, Military, Emergency Serrvices.

Code

outstanding durability.

y 0 535 3.60 710 6.30

Code

No.

y 250 535 710

676534 622C Copper Sledge Hammer 676536 622C Copper Sledge Hammer 676538 622C Copper Sledge Hammer

0 1.80 3.60 6.30

NEW

650C CLUB HAMMERS › Fine grain high alloy steel/carbon steel. › Drop forged. › Heat treated and induction hardened. › Highly polished head. › Fiber glass handle. › Comfortable shock absorbant vinyl grip. › 50-58HRC.

Close up

Code

No.

6765392 650C Club Hammer 6765390 650C Club Hammer

y 260 275

0 1.100 1.800

133

VDE INSULATED SAFETY TOOLS 134 - 141

134

VDE INSULATED SAFETY TOOLS

SPANNERS 136

NUT DRIVERS 136

NUT DRIVER SET 136

TORQUE WRENCH 137

SCREWDRIVERS 137

PLIERS / SIDE CUTTERS 138

CABLE SHEARS 140

VOLTAGE TESTER 140

TOOLSETS 140

INSULATED SAFETY TOOLS

VDE 2 E VDE SINGLE ENDED RING SPANNERS

VDE 894 VDE SINGLE OPEN ENDED SPANNERS

deep offset › Gedore Vanadium steel 31CrV3. › VDE insulation up to 1000 V, according to EN 60900/IEC 60900, two-ply Check-Tool insulation.

› Gedore Vanadium steel 31CrV3. › VDE insulation up to 1000 V, according to EN 60900/IEC 60900, two-ply Check-Tool insulation. › Jaw set at 15 °.

VDE 2 E 19

VDE 894 12

VDE 2 E 13

*WHILE STOCKS LAST / INDENT ONLY Code

No.

6036000 6036190 6036350 6036430 6036780 6036860 6037320

VDE 2 E10mm * VDE 2 E11mm * VDE 2 E13mm * VDE 2 E14mm * VDE 2 E17mm * VDE 2 E19mm * VDE 2 E32mm *

170 180 190 210 220 240 330

VDE 894 22

*WHILE STOCKS LAST / INDENT ONLY

10 11 13 14 17 19 32

0 0.097 0.093 0.130 0.151 0.199 0.244 0.683

VDE 2133 NUT DRIVERS

ö 1000 V

with 3C handle

Code

No.

6572120 6572200 6572470 6572550 6572980 6573010 6574920

VDE 894 10mm * VDE 894 11mm * VDE 894 13mm * VDE 894 14mm * VDE 894 17mm * VDE 894 19mm * VDE 894 32mm *

y 105 115 135 145 160 175 280

3 10 11 13 14 17 19 32

VDE 2133 NUT DRIVER SET

0 0.034 0.044 0.067 0.081 0.117 0.161 0.558

ö 1000 V

10 pieces

› 3-component handles Power-Grip3 with hanging hole. › Ergonomic handle design. › Head depth 25mm, blade length 125mm. › VDE insulation up to 1000 V, according to EN 60900/IEC 60900.

Code

No.

1747045 1747053 1747061 1747088 1747096 1747118 1747126 1747134 1747142 1747150 1747169 1747177 1747185

VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133 VDE 2133

136

N 3 4 5 6 7 8 9 10 11 12 13 14 17

225 225 225 225 235 235 235 245 245 245 245 245 245

1 3 4 5 6 7 8 9 10 11 12 13 14 17

Head Ø 9 10 11 12 14 15 16 17 19 20 21 22 26

0 0.109 0.111 0.112 0.114 0.152 0.154 0.154 0.161 0.193 0.196 0.199 0.198 0.222

Code

No.

1747260 VDE 2133 / 10

Contents

2133 5,0 6,0 7,0 8,0 9,0 10,0 11,0 12,0 13,0 14,0

1.30

› Only tools bearing these test symbols are classed as insulated tools. › VDE insulation as per standard EN60900, IEC/CEI900, VDE0680. › Safe working in high-voltage areas. › Up to 1000V alternating current. › Up to 1500V direct current.

ö 1000 V

VDE 4507 TORQUE WRENCH 1/2" 5-50 Nm / 4-37 lbf·ft › Controlled screw tightening in the most common range of 5 - 50Nm / 4 - 37 lbf·ft.

› Automatic short-path actuation with tactile impulse and audible signal. › Dual scale with a scale graduation of 5Nm and 5lbf·ft. › Fine toothed ratchet with square drive as per DIN 3120 - A 12.5, ISO 1174. › VDE insulation up to 1000V, according to EN 60900/IEC 60900, two-ply Check-Tool insulation.

*WHILE STOCKS LAST Code

No.

a„

6681920

VDE 4507-4 *

1/2

12.5

VDE 2160 PH PHILLIPS SCREWDRIVERS

iO ö 1000 V

y 370

0 1.251

ö 1000 V VDE 2170 ELECTRICIAN‘S SCREWDRIVERS

for cross-head screws PH

for slotted head screws

› Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade › Blade tip to DIN ISO 8764-1 PH › 3-component handles Power-Grip3 with hanging hole › Ergonomic handle design enables precise and fatigue-free working › Positive-fit joint of handle and blade for optimum transmission of force › Type of drive marked at end of the handle › Blade from GEDORE molybdenum-vanadium-Plus tempered steel

› Individually tested, VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, fully insulated blade › Tip to DIN ISO 2380-1 form B › 3-component handles Power-Grip3 with hanging hole › Ergonomic handle design enables precise and fatigue-free working › Positive-fit joint of handle and blade for optimum transmission of force › Type of drive marked at end of the handle › Blade from GEDORE molybdenum-vanadium-Plus tempered steel

Code 1612115 1612123 1612131

No. VDE 2160 PH1 VDE 2160 PH2 VDE 2160 PH3

+ M2 - M3 M3,5 - M5 M5,5 - M7

; 1 2 3

N 180 210 270

0 0.082 0.119 0.188

Code 1612220 1612247 1612255 1612271 1612298

No. VDE 2170 2,5 VDE 2170 3,5 VDE 2170 4 VDE 2170 5,5 VDE 2170 6,5

?K 2.5 3.5 4.0 5.5 6.5

N 160 185 185 225 260

0 0.038 0.055 0.058 0.095 0.134

VDE 2160-2170 SCREWDRIVER SET 6 pieces

Code No. 1616048 VDE 2170-2160 PH 06

Contents ? VDE 2170 3.5 4 5.5 6.5 ; VDE 2160 PH1 PH2

0 0.660

137

INSULATED SAFETY TOOLS

R iO

VDE 8250 H VDE HEAVY DUTY COMBINATION PLIERS

ö 1000 V

with VDE insulating sleeves

› For consistent use under tough working conditions. › To cut all wire types including piano wire. › Good lever action for easy cutting. › In heat treated steel as per DIN EN 10083. › Oil hardened, chrome plated. › Cutting edges inductively rehardened, approximately 64HRC. › Handles with VDE dipped insulation as per DIN EN 60900.

› For hard wires. › Oil hardened, chrome plated. › Cutting edges inductively rehardened, approximately 64HRC. › Handles with VDE dipped insulation as per DIN EN 60900.

Code 1550942 1550950 1550969

No. VDE 8250-160 H VDE 8250-180 H VDE 8250-200 H

y 160 180 200

VDE 8314 H VDE SIDE CUTTERS

0 0.228 0.288 0.369

P iO ö 1000 V

Code 1551000

› With slender head - ideal for confined spaces. › For medium-hard wire, 1.6 mm. › Cutting edges inductively rehardened, approximately 64HRC. › Oil hardened, chrome plated. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE dipped insulation as per DIN EN 60900.

› Opening stop, spring and brass adjusting screw. › For cables 0.8 - 6.0 mm2. › GEDORE special hardened and tempered steel, chrome-plated. › Handles with VDE insulation as per DIN EN 60900.

Ø 1.6 1.6

y 140 160

0 0.177 0.231

y 200

VDE 8098 H VDE STRIPPING PLIERS with VDE insulating sleeves

No. VDE 8314-140 H VDE 8314-160 H

ö 1000 V

No. VDE 8316 - 200 H

with VDE insulating sleeves

Code 1552155 1552163

P iO

VDE 8316 H VDE POWER SIDE CUTTERS

Code 1552074

No. VDE 8098-160 H

y 160

VDE 8132 H VDE TELEPHONE PLIERS

0 0.350

ö 1000 V

0 0.204

T iO ö 1000 V

with VDE insulating sleeves, straight pattern › Long, flat jaws and straight gripping surfaces. › Face hardness approximately 62HRC. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900. 138

Code 1552112 1552120

No. VDE 8132 - 160 H VDE 8132 - 200 H

y 160 200

0 0.150 0.210

VDE 8099 H VDE STRIPPING PLIERS

iO ö 1000 V

VDE 8120 H VDE FLAT NOSE PLIERS

with VDE insulating sleeves

› Self adjusting for wires 0,5-5,0mm2. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.

› Long, flat jaws and serrated gripping surfaces. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.

Code 1552082

No. VDE 8099-160 H

y 160

VDE 8122 H VDE ROUND NOSE PLIERS

0 0.170

S iO ö 1000 V

with VDE insulating sleeves

Code 1552090

No. VDE 8120 - 160 H

R iO ö 1000 V

y 160

0 0.210

T iO

VDE 8132 AB H VDE BENT NOSE TELEPHONE PLIERS

ö 1000 V

with VDE insulating sleeves, angled pattern › Long, round jaws and serrated gripping surfaces. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.

Code 1552104

No. VDE 8122 -160 H

› Long, flat jaws and angled gripping surfaces. › Face hardness approximately 62HRC. › GEDORE special hardened and tempered steel, chrome plated. › Handles with VDE insulation as per DIN EN 60900.

y 160

0 0.180

VDE S 8003 H VDE PLIERS SET WITH VDE INSULATING SLEEVES

Code 1552139 1552147

No. VDE 8132AB-160 H VDE 8132AB-200 H

y 160 200

0 0.150 0.210

T P iO ö 1000 V

3 pieces › Packed in environmentally-friendly cardboard box › Handles with VDE insulating sleeves up to 1000 V, acc. to EN 60900/IEC 60900 Code

No.

1550594

VDE S 8003 H

Contents VDE 8132 - 160 H VDE 8250 - 180 H VDE 8314 - 160 H

0 0.747

139

INSULATED SAFETY TOOLS

VDE 4522 CABLE KNIFE

iO ö 1000 V

No. VDE 4522

y 180

VDE 1001 VDE TOOLSET

0 0.104

ö 1000 V

the adjusting screw of extension no. VDE 1990 no. 42 is not VDE insulated.

No. 1001 VDE Toolset

Allen Keys 42 2,5

Sockets VDE 19 10 12 13 14 17 19 22 24

Accessories VDE 1993 U VDE 1990-5 -10 VDE 1989 T VDE 2170 5,5

0 3.40

VDE 1101-003 VDE TOOLSET

140

Contents VDE 8132-200H VDE 8250-180H VDE 8314-160H

y 620

0 2.12

ö 1000 V

› AC and DC voltages from 12-690V. › Accoustic continuity testing up to 500KOhm. › Single pole phase testing > 100VAC. › With VDE insulation as per DIN EN 60900. › Twin-pole with LED display. › 2x batteries type AAA included. › Integrated LED torch (white). › Automatic on/off function. › Protection classification IP65, dust-proof, hose-proof. › Safety outlet and CEE one-hand operation. › Displays polarity in case of direct current (DC).

Code 2241137

No. V 4614

0 0.270

ö 1000 V

› In Gedore i-BOXX® 72, with transparent cover for easy view of tools. › Dimensions: 367 x 316 x 72mm.

No. 1101-003

No. 180-23

T P ? ; iO

in i-BOXX® 72

Code 1828045

Code 6430330

o V 4614 PLUS d ? VOLTAGE TESTER 1000 V 5 two-pole with LED display iO

› With practical foam insert in sturdy PVC case. › Dimensions: 395 x 295 x 106mm. › Cranked allen socket screwdriver no. 42 is for locking

Code 6602560

ö 1000 V

› Cuts cable up to 27mm, solid material up to 200 mm2. › Individually tested, insulation up to 1000V.

› Strong, straight blade made from hardened and tempered steel. › Tough, resilient plastic handle. › With VDE insulation as per DIN EN 60900.

Code 6690400

V 180 CABLE SHEARS

VDE 2170 4 5,5 VDE 2160 PH1 PH2 VDE 4615 3

0 2.00

o d 5 iO

ELECTRICIAN‘S TOOLSET › Double stitched and bound. › Very durable water repellent inner lining. › Heavy duty zip. › Reinforced inners.

Code 668122

No. Electrician’s Tool Set

1B Spanners 8 10 13 17 19

ö 1000 V

42-88M Allen Keys 2 2,5 3 4 5 6 8 10

VDE Screwdrivers VDE 2160 PH1 PH2 PH3 VDE 2170 4 5.5 6.5 VDE Nut Drivers Accessories 0 2133 4 6 Electrician’s Toolcase 145-250 Waterpump Pliers 6.10 8 10 13 VDE 8098-160H Stripping Pliers 9930.000 Torch VDE 8250-200H Combination Pliers 9534.05 Tape Measure VDE 8314-160H Side Cutters VDE 4522 Cable Knife VDE 8132-200H Telephone Pliers Digital Multimeter 137-175 Grip Pliers 8601-300 Ball Pein Hammer 62-250 P10 Shifting Spanner

1100-1094 VDE TOOL ASSORTMENT HYBRID

n c iO ö 1000 V

› Perfect range of tools for all vehicle types. › Comes in Gedore L-BOXX´®

Code No. 2979063 1100-1094

Contents VDE 30 6 8 9 10 11 12 13 14 VDE 146 10 15 16 17 18 19 20 22 VDE 8250-200H VDE INX 30 8 10 12 VDE 8314-180H VDE 3090-3 3093-6 VDE 8132 AB-200H VDE 3093-U VDE 8120-160H VDE 2170 2,5 3,5 4 5,5 VDE 4522 VDE 2160 PH1 2 3 V914 1 2 3 VDE 2163 TX T20 T25 T30 VDE 8094

0 8.04

141

TORQUE TOOLS 142 - 177

142

TORQUE TOOLS

TORCOFIX 146

DREMASTER 148

DREMOMETER 150

TORQUE SLIPPERS 156

TORQUE BREAKERS 158

TORQUE SCREWDRIVERS 162

CALIBRATION ANALYSERS 163

FITTINGS / RATCHET HEADS 165

MULTIPLIERS 167

TORQUE TOOLS

OVERVIEW OF GEDORE TORQUE TOOLS Page

Series/Type 0,4 – 3.000Nm

Precision +/-

Drive

Ratchet

Scale

Operation length independent

Release types

Mechanical Torque Wrenches

155

Dremometer Mini

152

Dremometer

149

Dremaster DMK

149

Dremometer DMSE

146

Torcofix K

147

Torcofix SE

147

Torcofix FS

156

TSN Slipper

b d

158

TBN Breaker

4%, 6%

157

TSP Slipper

157

TSC Slipper

161

Typ 83

b d

160

Typ 88

0,04 – 13,6Nm Torque screwdriver 162

TLS Pro

162

Typ 756 S

2 – 1.000Nm 160

Torcotronic III

Electronic torque wrench

Torque testers 163

Dremotest E

TORCOFIX

144

146

DREMASTER

148

Different Torque Tool Mechanisms Range Nm

100

150

200 300

400

500

750 1000 1500 2000

1 Click Tools Overtightening Possible

When the preset torque value is reached the operator will hear a click, feel an impulse and there will be approximately 3° of tool movement. Resetting takes place when the hand pressure is released. Work can then immediately continue. These tools are generally length dependent (exception DREMOMETER models AM - F), thus the position of the hand on the tool alters the torque produced. Continued application of force after the 3° of movement will cause the torque applied to increase above the required preset limit.

Torque

Mechanical torque wrench 2,5 – 12Nm

Preset Torque Value

6 – 3.000Nm

20 – 850Nm

p ro

x. 3

°m

o ve

20 – 400Nm ap

1 – 750Nm

Applied Force

5 – 50Nm Overtightening Possible

2 – 200Nm 3 – 125Nm 5 – 200Nm

2 Breaking Tools Overtightening Unlikely

1 – 10Nm

When the preset torque value is reached, these tools break at a specific point along the tool’s length - usually at a pivot point near the tool’s head. In most cases the movement is approximately 20°. The tool is automatically reset by allowing the handle to return to its in line position. These tools are length dependent, thus the position of the hand on the tool alters the torque produced. Continued application of force after 20° of tool movement will increase the torque applied above the preset limit but with the greater angle of tool movement this is less likely.

1 – 10Nm Torque

0.8 – 2000Nm 100 – 1500Nm Preset Torque Value

5 – 125Nm 0,05 – 25Nm 0,05 – 9Nm

1 – 10Nm

ro pp

v mo

Applied Force

70 – 350Nm

Overtightening Unlikely

0,9 – 3150Nm

3 Slipping Tools Overtightening Impossible

DREMOMETER

1 50

When the preset torque value is reached, a mechanism in the tool causes the application of torque to cease and the tool slips free for a short time until resetting occurs. Even if the application of force is repeated, the preset torque value will not be exceeded, therefore making it impossible to overtighten a fastener. These tools are not length dependent.

Torque

Preset Torque Value

Applied Force

Overtightening Impossible

145

TORQUE TOOLS

TORCOFIX

Robust torque wrench with square drive and integrated ratchet-head function for controlled bi-directional tightening. Scale Easily readable double scale (Nm/lbf.ft), well protected behind a window with a magnifying glass effect. The torque setting is readable on the scale or, more particularly, on the scale in combination with the scale ring.

Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back. Calibrated to a permitted +/- 3% deviation and better. The specifications of the standard (+/- 4%) are exceeded. Maximum +/- 3% tolerance: Guaranteed TORCOFIX accuracy of +/- 3% of relevant scale value reading for each 5,000 tightening cycles. Includes test certificate as per DIN EN ISO 6789. Serial number on the wrench and on the certificate allows clear product identification, traceable to national norms.

Micrometer scale Optimised shape, stable scale frame with red-shaded micrometer scale ring. Model-dependent intervals of 0.025, 0.1, 0.25, 0.5 or 1Nm allow very accurate settings.

Automatic actuation The TORCOFIX actuates with a clear tactile impulse and audible signal and is immediately ready for operation again. Chrome-plated ratchet head All 1/4“-1/2“ square drives of the TORCOFIX K series have a black plastic cap – also referred to as a mushroom head. This mushroom head prevents an unintentional pulling out of the whole square drive when changing the nut socket.

Ligthweight and reliable Locking button enables reliable locking of the torque setting.

Handgrip with a user aid Black plastic handgrip, new ergonomically enhanced shape, with an indentation in the middle of the handgrip. User aid and reference points for calibration.

Robust steel tube With high corrosion protection, copper clad and chrome plated, silk-matt.

TORCOFIX K / SE / FS

4550 TORQUE WRENCH TORCOFIX K 40-750Nm / 30-550lbf·ft › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying effect. › Black plastic handgrip with slip-resistant ribbed surface. › Sturdy, varnished tubular steel construction, with zinc plated ratchet head and top grade plastic parts. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm. › Supplied with a calibration certificate. › Unique serial number for traceability.

Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

Code 7601610 7674330 7674760 1521365

No. 4550-20 4550-40 4550-55 4550-75

„ a 1/2 3/4 3/4 3/4

a 12.5 20.0 20.0 20.0

Nm 40-200 80-400 110-550 150-750

lbf·ft 30-150 60-300 80-405 110-550

y 485 665 960 1240

0 1.10 1.86 3.56 4.50

FUNCTION In order to change the turning direction of the TORCOFIX K:

› Press on the protruding square drive with your

thumb and take out the mushroom head, turn the wrench over and re-insert the square drive.

146

1 3

180

4101 4150-4151 TORQUE WRENCH TORCOFIX SE TORQUE WRENCH TORCOFIX FS 5-50Nm / 3.5-37lbf·ft

9x12

Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features: › Adjustable torque wrench with a 9x12 rectangular cavity. › For controlled bi-directional tightening. › With pin-locking mechanism for replaceable 9x12 spanner end fittings. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying effect. › Full-metal construction from high strength aluminium alloy. › Supplied with a calibration certificate. › Unique serial number for traceability.

Code 1646206

No. 4101-05

: 9x12

„

Nm 5-50

lbf·in 3,5-37

y 325

0 0.640

9x12

2-200Nm

Use: › For use in almost all industrial manufacturing areas. 14x18 › For controlled nut and bolt tightening. Features: › Adjustable torque wrench with a 9x12 or 14x18 rectangular cavity. › For controlled bi-directional tightening. › With pin-locking mechanism for replaceable 9x12 or 14x18 spanner end fittings. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying effect. › Full-metal construction from high strength aluminium alloy. › Supplied with a calibration certificate. › Unique serial number for traceability.

Code 7601960 7602180 7602850 7603580

No. 4150-25 4150-50 4150-85 4151-20

: 9x12 9x12 9x12 14x18

„

Nm 2-25 5-50 15-85 20-200

y 180 240 320 400

0 0.210 0.270 0.340 0.750

TORCOFLEX UK

NEW

4549 TORQUE WRENCH TORCOFIX K

3549 UK - 3550 UK TORQUE WRENCH TORCOFLEX UK

1-50Nm / 0.75-37lbf·ft

5-200Nm

Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening.

› Ideal for fitment centres and automotive workshops. › For controlled nut and bolt tightening.

› Adjustable torque wrench with a square drive and integrated ratchet head function. › For controlled bi-directional tightening. › Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals. › Double scale Nm and lbf.ft behind window with magnifying effect. › Black plastic handgrip with slip-resistant ribbed surface. › Full-metal construction from high strength aluminium alloy. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm. › Supplied with a calibration certificate. › Unique serial number for traceability.

› Torque wrench with integrated lever-ratchet-head. › Working accuracy: +/- 3% tolerance of scale set torque. › For controlled directional tightening › Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate.

Features:

FREE with 3550-UK-LS 3

17mm

Code 2201429 1545132 1545140

No. 4549-00 4549-02 4549-05

„

a 1/4 1/4 3/8

a 6.3 6.3 10.0

Nm 1-5 2-25 10-50

lbf·in 0,75-3,7 1,5-18 7,5-37

y 225 285 335

0 0.323 0.450 0.540

Code 2958015 2958023 2958031 3014398

19mm

No. 3549-02 UK 3549-05 UK 3550-10 UK 3550-UK-LS 3 INCLUDES 3 FREE SOCKETS 17, 19, 21mm

21mm

a 1/4 3/8 1/2 1/2

„

a 6.3 10.0 12.5 12.5

Nm 5-25 10-50 20-100 40-200

y 285.5 348.5 408.8 499

0 0.410 0.820 1.380 1.990

147

TORQUE TOOLS

DREMASTER ® Robust torque wrench with square drive and integrated ratchet-head function for controlled bi-directional tightening and interchangeable mushroom head with push-button release.

Chrome plated ratchet head All 1/2” square drives of the DREMASTER DMKseries have a black plastic cap – also referred to as a mushroom head. This mushroom head prevents an unintentional pulling out of the whole square drive when changing the socket.

Robust steel tube With high corrosion protection, chrome plated, satin powder coated.

Handgrip with a user aid Black plastic handgrip, new ergonomically enhanced shape, with an indentation in the middle of the handgrip. User aid and reference points for calibration.

Nonius Model-dependent intervals of 1 or 0.5Nm allow for very accurate settings.

Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back. Calibrated to a permitted +/- 3% deviation and better. Exceeding the specifications standard of +/- 4%.

Ligthweight and reliable Locking button enables reliable locking of the torque setting. Torque adjustable reference by means of opened lock symbol. Provision for rapid setting from the separate hexagon allen key fixture.

Dual scale with main and alternative unit (Nm/Ibf·ft). Main unit Nm with vernier. At all times only one unit in the viewing area = avoids any reading errors. Change-over switch next to the scale for straightforward unit selection. Automatic actuation The DREMASTER® DMK actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.

Technical information Anti-loss attachment

Additional protection of the serial number Concealed setting drill hole = secured adjusting/setting system serial number on the wrench and on the certificate for unambiguous product identification, traceable via in-house DAkkS laboratory to national standards.

Function In order to change the turning direction of the DREMASTER® DMK: Press on the push-button with your thumb and take out the mushroom head. Turn the wrench over and re-insert the square drive.

1 2

180° GEDORE Werkzeugfabrik GmbH & Co. KG Remscheider Straße 149 42899 Remscheid · GERMANY

All the benefits at a single glance › Additional protection of the serial number. › Concealed setting drill hole. › Engaging adjusting button with locking reference (lock symbol). › Rapid adjustment provision using a separate hexagon allen key. › Mushroom head with release button and soft component.

Vertrieb DEUTSCHLAND Fon +49 2191 596-900 Fax +49 2191 596-999 zentrale@gedore.com

Sales INTERNATIONAL Fon +49 2191 596-910 Fax +49 2191 596-911 www.gedore.com

› Plastic grip with soft component. › Dual scale (main unit with vernier). › At all times only one unit in the viewing area (Nm or lbf·ft). › Change-over switch for selecting the unit. › Controlled safety via in-house DAkkS test laboratory. 2995832 01/16

148

DREMASTER®

DMK TORQUE WRENCH DREMASTER® 20-850Nm / 15-630lbf·ft Use:

› Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Sturdy, satin-chrome plated tubular steel construction, with chrome plated

Features: › Adjustable torque wrench with a square drive and integrated ratchet head function. › For controlled bi-directional tightening. › Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals.

› Ergonomically shaped, two-component plastic grip with calibration aid. › Double scale Nm and lbf.ft behind window with magnifying effect. › Additional micrometer scale with a Nm graduation of 0.1, 0.25, 0.5 or 1Nm. › Supplied with a calibration certificate. › Unique serial number for traceability.

› For use in all areas of industrial manufacturing. › For controlled nut and bolt tightening.

Code 2641232 2641240 2641259 2641267 2641275 2641283 2641291

No. DMK 100 DMK 200 DMK 300 DMK 400 DMK 550 DMK 750 DMK 850

ratchet head and top grade plastic parts.

„ a 1/2 1/2 1/2 3/4 3/4 3/4 3/4

a 12.5 12.5 12.5 20.0 20.0 20.0 20.0

Nm 20-100 40-200 60-300 80-400 110-550 150-750 250-850

lbf·ft 15-75 30-150 45-220 60-300 80-405 110-550 185-630

9 5 N·m 10 N·m 10 N·m 10 N·m 10 N·m 10 N·m 10 N·m

Scale ring 0,5 N·m 1 N·m 1 N·m 1 N·m 1 N·m 1 N·m 1 N·m

y 423.5 514.5 606.4 714.8 953.2 1,228.2 1,375.2

0 1.10 1.30 1.50 2.40 3.80 4.90 5.20

9x12

DMSE TORQUE WRENCH DREMASTER® 20-400Nm / 15-300lbf·ft Use:

› Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Sturdy, satin-chrome plated tubular steel construction, with chrome plated ratchet

Features: › Adjustable torque wrench with a spigot end. › For controlled bi-directional tightening. › Interchangeable mushroom head square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Lever breaking mechanism with a castor guarantee tactile impulse and audible actuation signals.

› For use in all areas of industrial manufacturing. › For controlled nut and bolt tightening.

Code 2641445 2641453 2641461 2641488 2641496

No. DMSE 100 DMSE 150 DMSE 200 DMSE 300 DMSE 400

head and top grade plastic parts.

: 9x12 9x12 14x18 14x18 14x18

Nm 20-100 30-150 40-200 60-300 80-400

lbf·ft 15-75 22-110 30-150 45-220 60-300

9 5 N·m 10 N·m 10 N·m 10 N·m 10 N·m

Scale ring 0,5 N·m 1 N·m 1 N·m 1 N·m 1 N·m

y 398.5 489.5 499.5 590.4 677.2

0 1.00 1.16 1.25 1.40 2.00

149

TORQUE TOOLS

DREMOMETER PERMANENT PRECISION Torque wrench made of high-strength aluminium alloy

Drive in accordance with application DREMOMETERS are available for a large variety of applications in controlled screw tightening. The single square drive for controlled clockwise tightening or the double square drive (L) for controlled bi-directional tightening. Special utilisation areas for DREMOMETER with spigot end (Z) and rectangular cavity (SE) particularly for hard-to-access locations and where space is tight. Almost all DREMOMETER models have separate ratchet heads, and there are good reasons for that: It is possible to work with or without the ratchet head function as desired.

Model Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back. Calibrated to a permitted +/- 3% deviation and better. The specifications of the standard (+/- 4%) are exceeded.

Robust The full-metal construction of the DREMOMETER makes it particularly unsusceptible to grime and rough handling on construction sites, in workshops and in industry.

Automatic resetting The DREMOMETER gives the operator an audible signal and tactile impulse and is back in operation in an instant.

Working principle s b-g

6-3000Nm

tL b-f

6-2000Nm

The quality lever chain produced in Gedoreâ&#x20AC;&#x2DC;s own drop forge reduces the strain on the mechanics to a minimum. The proportioning of the individual levers, which are optimally attuned to each other, gives the DREMOMETER its unique precision and its long tool life.

Position of the lever chain without impact of force (in starting position).

2 Position of the lever chain with impact of force before the set torque is achieved. The force is transferred from the primary lever to the intermediary and final lever until the final lever slips past the so-called release lever through the sliding back of the angle-lever body.

8-1000Nm

SE } ~ 150

8-400Nm

3 Position of the lever chain when the force impacts after the torque setting is achieved. Immediate position after the clear tactile impulse and audible signal click. On relief, the lever chain moves back into the starting position (1).

Maximum precision Extended tool life span even if used intensely.

› Serial number on the wrench and on the certificate for product identification and traceability.

DREMOMETER Operable without inaccuracies Regardless of where you apply the force, at the centre of the handgrip or another part of the DREMOMETER, with both hands or using an extension tube, your torque setting will always be attained, without shifts in value. Due to its unique single-axis location of the centre of rotation and the output square drive, the DREMOMETER is a tool that can be operated free from errors. In contrast to conventional torque wrenches, this single lever enables tightening without shifts in the measured value and without interference caused by activation outside of the handgrip.

Lightweight and pleasant The aluminium housing and the ergonomically designed handgrip enable simple and safe operation over wide tightening ranges.

Scale Clear dual scale Nm and lbf·in/lbf·ft on every DREMOMETER (apart from models E / EL / EK / EKL / F).

Features Setting of the torque value to Nm or alternatively to lbf·in / lbf·ft by the clumsy hexagon key in the handgrip. The smooth-running mechanism enables the setting to be made quickly without significant force needing to be applied. 2

However, value shifts are possible when activating the DREMOMETER with special wrenches or when using wrenches with different depth gauges. All DREMOMETERS are also available with locking and safety device (A+S).

A+S

151

TORQUE TOOLS

DREMOMETER

8554 TORQUE WRENCH DREMOMETER 6-30Nm / 50-270lbf·in Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features: › Adjustable torque wrench with a 1/4” single square drive for controlled clockwise tightening. › 1/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certificate. › Unique serial number for traceability. „ Code Type No. Contents a a 7775440 8554-01 1/4 6.3 s ! in plastic box

9 1Nm / 10lbf·in

Nm 6-30

lbf·in 50-270

y 265

0 0.580

Nm 8-40

lbf·in 70-350

y 338

0 1.00

Nm 20-120

lbf·ft 15-90

y 462

0 1.50

8560 TORQUE WRENCH DREMOMETER 8-40Nm / 70-350lbf·in Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

› Adjustable torque wrench with a 3/8”single square drive for controlled clockwise tightening. › 3/8” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certificate. › Unique serial number for traceability. Code 7682000

Type s

No. 8560-01

„ a 3/8

a 10

Contents ! in plastic box

9 5Nm / 50lbf·in

8561 TORQUE WRENCH DREMOMETER 20-120Nm / 15-90lbf·ft Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

› Adjustable torque wrench with a 1/2”single square drive for controlled clockwise tightening. › 1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certificate. › Unique serial number for traceability. Code 7683320

152

Type s

No. 8561-01

„ a 1/2

a 12.5

Contents ! in plastic box

9 5Nm / 5lbf·ft

8562 TORQUE WRENCH DREMOMETER 50-300Nm / 35-220lbf·ft Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

› Adjustable torque wrench with a 1/2” single square drive for controlled clockwise tightening. › 1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certificate. › Unique serial number for traceability. Code 7685450

Type s

No. 8562-01

„ a 1/2

a 12.5

Contents ! in plastic box

Nm 50-300

lbf·ft 35-220

y 617

0 2.0

Nm 40-200

lbf·ft 30-150

y 551

0 1.40

Contents 9 ! in plastic box 5Nm / 5lbf·ft ! in plastic box

Nm 140-760 140-760

9 5Nm / 5lbf·ft

8573 TORQUE WRENCH DREMOMETER 40-200Nm / 30-150lbf·ft Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

› Adjustable torque wrench with a 1/2” single square drive for controlled clockwise tightening. › 1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certificate. › Unique serial number for traceability. Code 7685530

Type s

No. 8573-00

„ a 1/2

a 12.5

Contents ! in plastic box

9 5Nm / 5lbf·ft

8563 D & DR TORQUE WRENCH DREMOMETER 140-760Nm / 105-560lbf·ft Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

› Adjustable torque wrench with a 3/4” single square drive for controlled clockwise tightening. › 3/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale Nm and lbf.ft with scale graduation of 1Nm and 10lbf.in. › Supplied with a calibration certificate. › Unique serial number for traceability. Code 7670180 7691500

Type s s

No. 8563-01 (DR) with extension tube 8563-10 (D)

„ a 3/4 3/4

a 20 20

lbf·ft 105-560 105-560

y 1400 812

0 5.00 2.90

153

TORQUE TOOLS

8570 TORQUE WRENCH DREMOMETER 80-360Nm / 60-260lbf·ft Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

Type s

No. 8570-10

„ a 3/4

a 20

Contents ! in plastic box

9 5Nm / 5lbf·ft

Nm 80-360

lbf·ft 60-260

y 718

0 2.40

Nm 520-1000

lbf·ft 380-730

y 800-1400

0 5.10

8571 TORQUE WRENCH DREMOMETER 520-1000Nm / 380-730lbf·ft Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

Type s

No. 8571-01

„ a 3/4

a 20

Contents ! in plastic box with ALU extension tube

9 10Nm / 10lbf·ft

8564 TORQUE WRENCH DREMOMETER 750-2000Nm Use: › For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features: › Adjustable torque wrench with a 1” single square drive for controlled clockwise tightening. › 1” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Single scale Nm with scale graduation of 50Nm. › Extension tube with maximum lever length of 1998mm. › Supplied with a calibration certificate. › Unique serial number for traceability. „ Code Type No. Contents a a 7695250 8564-01 1 25 s ! with 2 extension tubes

154

9 50Nm

Nm 750-2000

y 932-2353

0 11.60

8572 TORQUE WRENCH DREMOMETER 1500-3000Nm Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

› Adjustable torque wrench with a 1.1/2” single square drive for controlled clockwise tightening. › 1.1/2” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Full-metal construction from high strength aluminium alloy. › Double scale with scale graduation of 50Nm. › Extension tube with maximum lever length of 2343mm. › Supplied with a calibration certificate. › Unique serial number for traceability. Code 7717160

Type s

No. 8572-01

„ a 1.1/2

a 40

Contents ! with 2 extension tubes

9 50Nm

Nm 1500-3000

y 1423-2343

0 13.20

y 211

0 0.320

753 TORQUE WRENCH DREMOMETER MINI 2-12Nm Use:

› For use in almost all industrial manufacturing areas. › For controlled nut and bolt tightening. Features:

› Adjustable torque wrench with a 1/4” single square drive for controlled clockwise tightening. › 1/4” square drive with ball-locking mechanism as per DIN 3120. › In accordance with DIN EN ISO 6789, traceable to national norms. › Automatic short path actuation with tactile impulse and audible signal. › Actuation accuracy: +/- 3% tolerance of the scale set to torque. › Window with a magnifying-glass effect. › Double scale with a scale graduation of 0.5Nm and 5 lbf·in. › Additional micrometer scale for setting interim values with Nm, graduations of 0.05Nm › Supplied with a calibration certificate. › Unique serial number for traceability. Code 1957694

Type Mini

No. 753-11

„ a 1/4

a 6.3

Contents ! in plastic box

9 0,5Nm / lbf·in + 0,05Nm

Nm 2-12

lbf·in 18-106

8200 TORQUE ANGLE INDICATOR Use:

› Additional angle regulated tightening for controlled torque and angle activation. Features:

› For additional precise angle tightening (0 - 360°) › 1/2“ square drive with ball-locking device. › With sliding magnetic and gripping arm. › For use with a suitable torque wrench. › The maximum output of the torque wrench must not be exceeded.

Code 1195980

No. 8200-01

„ a 1/2

„ Q 1/2

, 80

A° 0-360

0 0.330

155

TORQUE TOOLS

TSN SLIPPER Pre-set ratchet head torque wrench with automatic actuation and slip function. Over-tightening is not possible.

High repeatability Guarantees constant tightening torques.

Integrated ratchet function Particularly dependable ratchet with 36 teeth (75900/-01) or 48 teeth (759-02/-03). Slip-through function guarantees controlled and safe screw tightening, even in hard-to-access locations.

Output square drive Made of quality steel with ball-locking mechanism

Rubber handgrip Ergonomic and pleasant to hold in your hand. Prevents slipping.

Robust casting part Made of corrosion-resistant, rustproof material.

Working principle

Technical information

TSN SLIPPER

TSN SLIPPER & TBN BREAKER

When the pre-set torque value is achieved, the mechanism slips through over the ball (without the possibility of over-tightening). The torque wrench is then immediately ready for the next operation.

All TSN Slipper and TBN Breaker torque wrenches (apart from 76000/-01) are fitted with the patented Mechanical Torque Adjustment Locking Device to modify torque tester.

759 TORQUE WRENCH TSN SLIPPER 3-125Nm / pre-set › Precision mechanism slides through very noticeably and audibly when the pre-set

Use:

› For use in all areas of production line assembly. › For controlled nut and bolt tightening.

torque is achieved – over tightening is not possible.

› Automatic resetting to the starting position. › Lightweight yet stable and corrosion resistant construction design. › Black, non-slip rubber handgrip. › Supplied with a calibration certificate. › Unique serial number for traceability.

Features:

› Pre-set production torque wrench without scale. › Square drive with ball-locking mechanism. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/-4% tolerance of the set torque. Code 7091900 7092040 7092120 7092200

156

No. 759-00 759-01 759-02 759-03

„ a 1/4 1/4 3/8 1/2

a 6.3 6.3 10.0 12.5

Nm 5-25 5-25 15-55 40-125

y 216 216 324 460

0 0.340 0.340 0.800 1.360

761 TORQUE WRENCH TSP SLIPPER 1-10Nm / pre-set

Use:

› For use in all areas of assembly work where controlled tightening with low torque values is required (eg electronic hardware sector).

torque is achieved – over tightening is not possible.

› For controlled nut and bolt tightening.

› Automatic resetting to the starting position. › Lightweight yet stable and corrosion resistant construction design. › ESD (electrostatic discharge) = electrostatically protected. › Black, non-slip rubber handgrip. › Supplied with a calibration certificate. › Unique serial number for traceability.

Features:

› Pre-set production torque wrench without scale. › Square drive with ball-locking mechanism. › Integrated ratchet function for controlled clockwise tightening. › In accordance with DIN EN ISO 6789, traceable to national norms. Code 1196650 1196731

No. 761-05 761-10

› Actuation accuracy: +/-6% tolerance of the set torque. › Precision mechanism slides through very noticeably and audibly when the pre-set

„ a 1/4 1/4

a 6.3 6.3

Nm 1-5 2-10

y 185 185

0 0.190 0.190

762 TORQUE WRENCH TSC SLIPPER 1-10Nm Use:

› Precision mechanism slides through very noticeably and audibly when the pre-set

(eg electronic hardware sector). › For controlled nut and bolt tightening. Features: › Square drive with ball-locking mechanism. › Integrated ratchet function for controlled clockwise tightening. › In accordance with DIN EN ISO 6789, traceable to national norms. › Actuation accuracy: +/-6% tolerance of the set torque.

› For use in all areas of assembly work where controlled tightening with low torque values is required

Code 1196480 1196510

No. 762-05 761-10

„ a 1/4 1/4

a 6.3 6.3

torque is achieved – over tightening is not possible.

Nm 1-5 2-10

y 195 195

0 0.235 0.235

TSC TORQUE WRENCH ADJUSTABLE SLIPPER 10-90Nm

Use:

› Maintains production output by minimising operator fatigue through the tool’s

(eg electronic hardware sector). › For controlled nut and bolt tightening. Features: › Improved control of the fastening process by reducing the risk of both under and over tightening. › Unique slipping mechanism, which gives the operator more time to react once the target torque is reached. › Actuation accuracy: +/- 6% tolerance of the set torque.

› Maximises productivity in restricted space through its compact slimline design. › EPA compliant for use in electrostatically sensitive applications. › Drive type made of stainless steel. › Supplied with a calibration certificate. › Unique serial number for traceability. › Accessories available.

› For use in all areas of assembly work where controlled tightening with low torque values is required

Code 056060 056080

No. TSC-45 TSC-90

„ a 1/4 1/4

a 6.3 6.3

ergonomic design.

Nm 10-45 20-90

y 195 195

0 0.235 0.235

157

TORQUE TOOLS

TBN BREAKER Pre-set torque wrench with automatic snap actuation. Torque wrench offering maximum accuracy. Guaranteed tightening values without over-tightening.

Drive 16mm spigot end or 9x12mm rectangular cavity made of quality steel with pin-locking mechanism.

Breaking All TBN breaking torque wrenches break by 20Â° at the pivot point when the set torque is achieved. The models 760-00/-01 can also be set to a breaking angle of 90Â°.

Rubber handgrip: Ergonomic and pleasant to hold in your hand. Prevents slipping.

Lightweight steel tube Firm, solid and free of corrosion.

Patented mechanism Guarantees a long product lifespan with guaranteed accuracy values.

TBN Knicker j 5 - 135Nm

TBN Knicker } 0,2 - 135Nm

As an option, Gedore also manufactures the TBN Breaker models 760-00/-01 with interchangeable fittings directly positioned on the tool.

Working principle

Technical information

TBN BREAKER

When the TBN breaking torque wrench is operated, the rear section of the driver unit pushes on the roller. When the pre-set torque value is achieved, the lever switches over and the front section of the drive unit breaks.

TBN Breaker 760-00/-01 values are changed using the Double Positive adjustment system.

158

760 BREAKING TORQUE WRENCH TBN

9x12

0,4-200Nm / 44-147lbf·in / pre-set Use:

› For controlled nut and bolt tightening. › For use in all areas of production line assembly. › Extremely durable.

TBN-25G

Features:

› Pre-set production torque wrench – without scale › With 9x12mm rectangular cavity end or 16mm spigot-end. › For bi-directional tightening (the wrench only has to be turned by 180°). › Actuation accuracy: +/- 4% tolerance of the set torque. › Precision mechanism slides through very noticeably and audibly when the pre-set

TBN-135G

torque is achieved – over tightening is not possible.

› Automatic resetting to the starting position. › Lightweight yet stable and corrosion resistant construction design. › Black, non-slip rubber handgrip. › No. 760-00/-01: EPA (Electrostatic Protected Area) compliant. › The TBN range is available with a variety of end fitting styles.

Code 7090690

No. TBN-2G

7090770 1824694

TBN-65

: 9x12

EPA x

Nm 0.4-2

TBN-10G

9x12

TBN-25G

9x12

1824716

TBN-65G

9x12

1824732

TBN-135G

9x12

050310

TBN-200G

14x18

40-200

1825686 1824708 1824724 050300

TBN-25 TBN-65 TBN-135 TBN-200

16 16 16 16

lbf·in 1.8-18

y 133

0 0.125

1-10

9-89

133

0.145

5-25

44-221

265

0.405

10-65

89-575

302

0.745

25-135

177-1195

408

1.030

520

1.400

265 302 408 520

0.410 0.750 1.030 1.400

5-25 10-65 20-135 40-200

44-221 89-575 177-1195

ATB SE ADJUSTABLE BREAKING TORQUE WRENCH

9x12

1-10Nm Use:

› Controlled bolt and nut tightening. › For use in all areas of production line assembly. › Extremely durable. Features:

› Compact design allows easy access where space is restricted. › With 9x12 mm rectangular end. › Offers improved control of the tightening process by reducing the risk of under and over › › › › › › ›

tightening. This is achieved by Torqueleader’s unique breaking mechanism that allows the operator more time to react once the target torque is achieved. Accuracy +/- 6% of reading. Reduces the likelihood of warranty claims and rework by assuring process control through accurate and repeatable torque application. Automatic resetting to the starting position. Fast and accurate to set using the quick and easy to read micrometer setting scale. Black, non-slip rubber handgrip. This tool is length dependent, with hand position altering the torque applied. Accessories available.

Code 2839636 2839644

No. ATB-5G ATB-10G

: 9x12 9x12

ISO 1-5 2-10

y 230 230

0 0.290 0.300

159

TORQUE TOOLS

Torque wrench Type 88

8801 TORQUE WRENCH 150-1500Nm › Breaker mechanism (handle snaps over) is seen and felt when selected torque is

Use:

› Controlled bolt and nut tightening in the range 100 - 1500Nm. › For use in all areas of industry, automotive sector and machine maintenance.

reached, reducing the likelihood of over tightening.

› Dual scale in Nm and lbf·ft › Actuation accuracy: +/- 4% tolerance of the value setting. › 4 models in the range 150 - 1500Nm › Robust construction. › Supplied with a calibration certificate and unique serial number for traceability. › Delivered in sturdy cardboard packaging

Features:

› Adjustable torque wrench with scale. › 3/4"square drive with integrated ratchet function. › Push-through square drive for bi-directional tightening. › In accordance with DIN EN ISO 6789, traceable to national norms.

Code 3022854 3022862 3022870 3022889

„ a 3/4 3/4 3/4 3/4

No. 8801-01 8801-02 8801-03 8801-04

a 20 20 20 20

9 10Nm 10Nm 20Nm 25Nm

Nm 150-700 200-800 300-1000 700-1500

y 915 1090 1470 1470

0 5.500 6.000 7.300 10.00

Torcotronic lll

TT3KH ELECTRONIC TORQUE WRENCH TORCOTRONIC III 70-350Nm / 51.6-258.2lbf·ft

› For everyday requirements in installation and torque control. › For use in all areas of manufacturing and development.

› Resolution torque: 0.1Nm. › Resolution torque angle: 0.1°. › PC-software easy to operate for uncomplicated programming and

› Microprocessor controlled, electronic torque wrench with CE symbol. › For controlled bi-directional tightening › Broad measurement range in Nm, can be switched to lbf·ft. › With 1/2” reversible ratchet. The ratchet is exchangeable, providing the option of using

› Data can be transfered to MS Excel®. › Keyboard lock. › Operation with standard Mignon AA or optional with rechargeable-battery (NiMH). › Visual signal: 3x LED (yellow, green, red). › Acoustic signal: buzzer.

Use:

Features:

a 9x12mm (8455-120) or 14x18mm (8455-350) square socket. Characteristics: › Torque and torque angle measure. › 5 different measuring modes. › 5 parameters storable. › USB interface for data exchange. › 2000 storage places › High measurement accuracy: +/-1% tolerance for all read-off values, +/-1 digit. › Different depth gauges for end fittings programmable. › Simple to operate with easy to understand icon-menu navigation and 4 functional keys. › Clearly readable, illuminated LCD display.

*WHILE STOCKS LAST Code 2648644

160

No. TT3KH-350 *

„ a 1/2

documentation of data.

Scope of delivery:

› Electronic torque wrench TorcoTronic III HighLine. › Reversible ratchet 1/2". › USB cable. › Software on CD-R. › Supplied with a calibration certificate. › Delivered in a transparent plastic box with insert. Attention:

› A PC, running Windows® operating system (from Windows XP®) is required to obtain the full benefit of all the functions of this product.

a 12.5

: 14x18

N·m 70-350

lbf·ft 51.6-258.2

0 1.20

Torque wrench Type 83

TORQUE WRENCHES WITH SLAVE POINTER IDEAL FOR TEST, CONTROL AND MAINTENANCE WORK Clear product identification: Provided by the type plate/label. The article number and the serial number always ensure traceability to test and check the tool.

Solid tube: Light-metal tube with plastic sleeving. Integrated ratchet spindle: The double square drive enables high-speed bi-directional tightening.

Practical handgrip: Handgrip shaped in accordance with the most recent ergonomic findings. Resistant to grease and oil.

FEATURES

Dual scale: Nm and lbf·in/lbf·ft with main and slave pointers, protected by a strong window made of Trogamid T. The working principle of the torque wrench with slave pointer type 83

8301 - 8302 TORQUE WRENCH WITH SLAVE POINTER 0.8-200Nm Use:

Scope of delivery:

› Controlled tightening and verification of tightening values. › For use in all areas of industrial manufacturing and quality control. › Working ranges of 0.8 to 200Nm are covered.

› Dial-measuring torque wrench type 83. › Test certificate accoring to DIN EN ISO 6789. › Delivered in a sturdy black plastic box (no. 8301-04 to 8302-20).

Features:

› Dial-indicating torque wrench with dual scale and multi-functional slave pointer. › 1/4", 3/8", 1/2" double-square drive with ball locking device for controlled bi-directional tightening. › Models 8301-04 to 8302-20: With integrated ratchet function. › For controlled screw tightening and torque measurements. › Working accuracy: +/- 4% tolerance of the indicated torque. › Double scale in Nm and lbf·in or lbf·ft display on double tinted clearly readable face. › Integrated overload protection – mechanical stop up to maximum 25% overload of the maximum value.

› Housing made of lightweight, robust special aluminium construction – lacquered, silver-grey. › Black, non-slip rubber handgrips. › Models 8301-04 to 8301-40: EPA-conformant (Electrostatic Protected Area), for use in sensitive

8301

electrostatic applications.

8302

Code 7651390 7651470 7651550 7651630 7651710 7651980

No. 8301-04 8301-12 8301-25 8301-40 8302-08 8302-20

Type t t t t t t

„ a 1/4 1/4 3/8 3/8 1/2 1/2

a 6.3 6.3 10.0 10.0 12.5 12.5

9 0,1Nm / 1lbf·in 0,5Nm / 2lbf·in 1Nm / 10lbf·in 1Nm / 10lbf·in 2Nm / 1lbf·ft 5Nm / 5lbf·ft

Nm 0,8-4 2,4-12 5-25 8-40 16-80 40-200

lbf·in 7-35 21-105 44-240 72-360 12-60 30-160

Height 61 61 69 69 86 86

y 244 244 244 244 435 435

EPA x x x x

0 0.500 0.500 0.500 0.500 1.400 1.400

161

TORQUE TOOLS

TORQUE SCREWDRIVERS 756 Rubber handgrip: Ergonomic, ensuring a secure grip.

1/4" drive type: Made of stainless steel, for industry-standard bits.

Sliding T-Bar: Made of quality steel, can be adapted to enhance user‘s, transmission of power.

Positive-Lock system: Locks the set torque, reliably preventing it from wrong setting.

Scale: Clearly readable scale ring; enables you to make the setting accurately, quickly and without error.

756 TORQUE SCREWDRIVER TYPE S 0.24-9Nm › EPA-conformant (Electrostatic Protected Area), for use in sensitive

Use:

› For controlled screw tightening. › For use in electrical hardware, industrial manufacturing or in quality control.

electrostatic applications Scope of delivery: › Torque wrench type 756. › 1/4" square/hexagon drive adapter (no. 757-20). › Models 756-06/-09 with additional sliding T-bar for ease of use. › Supplied with a calibration certificate. › Unique serial number for traceability.

Features:

› Adjustable torque screwdriver – with scale. › With 1/4" female hexagon drive for use with 1/4" hexagon bits. › Actuation accuracy: +/- 6% tolerance of the set torque. › In accordance with DIN EN ISO 6789, traceable to national norms. › Precision radial ball clutch and cam design for controlled bi-directional tightening › Precision mechanism slips through very noticeably when the pre-set torque is achieved. › Automatic resetting to the starting position. › With set-torque-locking ‘positive-lock’ system, automatically fixes the set torque. › Non-slip rubber handgrip. › Micrometer scaling: 1cNm and 0.1Nm. Code 1400150 1400169 1400177

No. 756-01 756-06 756-09

„ a 1/4 1/4 1/4

a 6.3 6.3 6.3

„ 1/4 1/4 1/4

6.3 6.3 6.3

9 1cNm 0,1Nm 0,1Nm

Nm 0,24-1,2 1-6 4-9

cN.m 20-120 120-600 400-900

Height 61 61 69

y 183 196 196

0 0.165 0.340 0.340

TLS PRO PRESET TORQUE SCREWDRIVER 0.05-13.5Nm › Accurate process control is ensured by eliminating under and over tightening due to Torqueleader’s proven slipping technology.

› Years of dependable service is provided by the robust design especially if regularly calibrated. › Calibration stickers can be easily applied to the purpose designed nose. › To allow for customisation and clear identification, interchangeable coloured end caps are available. › Increased production efficiency by reducing operator fatigue due to a specifically designed ergonomic handgrip combined with a smooth tool reset action.

› To assist with higher torque, T-bars come standard with the Pro and ESD 450 and 1350 models. Code 065400 065500 065600 065700

162

No. TLS PRO 25H TLS PRO 150H TLS PRO 450H TLS PRO 1350H

„ 1/4 1/4 1/4 1/4

6.3 6.3 6.3 6.3

Nm 0.05-0.25 0.2-1.5 0.5-4.5 2.5-13.5

cNm 5-25 20-150 50-450 250-1350

y 132 132 140 140

0 0.210 0.210 0.230 0.230

8612 ELECTRONIC TORQUE TESTER DREMOTEST E 0.9-3150Nm

8612-720

8612-720 – 8612-740 › Guaranteed measuring accuracy: +/-2% of read-out in the core range of 20-100% of the scale. › Double scale in cNm and ozf.in or Nm and lbf.in. › For testing and setting clockwise torque wrenches and screwdrivers in the lower torque range of 0-25Nm.

8612-050 – 8612-3150 Use: › For verifying and setting clockwise torque wrenches and torque screwdrivers. Features: › Simple, electronic torque tester with integrated torque transducer (DMS). › 4 models in the range from 0.9 to 3150Nm. › Model 8612-3150 with 10mm, 17mm and 36mm hexagonal socket (size dependent). › Model 8612-3150 with 1“ square drive adapter. › Models 8612-050 - 8612-1000 with 1/4", 3/8" or 1/2"square drive adapter (depending on the size). › High measurement accuracy: +/- 1 % tolerance of reading, +/- 1 digit. › Break-point measurement (1st peak). › Auto reset. › Can be switched from Nm to lbf·ft. › Serial RS232 interface. Scope of delivery: › Electronic torque tester. › RS232 cable. › Power supply unit. › 100 - 240 V, 50 - 60 Hz, maximum 500mA (see type plate). › 2 sockets (size and drive model-dependent). › Adapter for 8612-3150. › Operating instructions.

*WHILE STOCKS LAST Code 1824635 1824651

No. 8612-720 * 8612-740 *

1947699 1856111 1947702 2529858

8612-050 * 8612-300 * 8612-1000 * 8612-3150 *

10 17 36

„ 1/4

„ a 1/4 1/4, 3/8

Resolution

Adapter Q

0.01 0.1 1 1

1/4, 3/8 3/8, 1/2 1/2, 3/4 1

„

lbf·ft

0.7-40.6 7-236 66-811 369-2323

0.9-55 9-320 90-1100 500-3150

cNm/Nm 26-130 2.4-12

ozf.in/lbf.in 36-180 0.2-2

Gradation 2cNm/2ozf.in 0.2Nm/2lbf.in

0 10.000 3.200 3.000 3.000 10.000 26.000

Torque calibration analysers

NEW

CAPTURELITE

The latest edition to the Gedore Capture range is Capture Lite. A robust Torque tester for use in industrial, automotive and production environments. Suitable for use with clicker, breaking and slipping wrenches and torque screwdrivers. The robust construction with aluminium anodised body ensures long tool life. OLED display, safely housed under a robust perspex screen protector allows for a compact design. Capture Lite’s contemporary & high quality appearance means that it is appropriate and well adapted for use in high technology & manufacturing environments. Capture Lite’s power and data links via the USB port located at the rear of the device allow data to be exported if required.

The Torque tester is easy to operate and can be used by operators at any skill level. Easy to read display gives the operator a quick and efficient method for checking their tools. Designed to give the user confidence that their Torque tools are operating within limits. Capture Lite has three modes: Peak- displaying the highest torque value reached, First Peak- displaying the first peak torque value & Track -progressively tracks the applied torque. To protect the Capture Lite when not in use it is supplied with a protective carry case and USB power cable.

› One piece aluminium lightweight design. › Clear to read OLED Display for accurate readings. › Simple one button design for ease of use. › Supplied with USB connection for portability with ability to use a power bank etc. › Easy to switch between N.m, lbf.in and lbf.ft units allowing a range of measurements to be used. › Supplied with an in-house calibration certificate. › Suitable for bench or wall mounting. › As with all Gedore Torque Tools our products are guaranteed by a 2 year warranty. › Gedore Torque offer a full and comprehensive after sales service for all our tools. Code 038120 038160

No. CL 10 CL 400

Nm 1-10 1-400

„

3/4

„ 1/4

Dimensions (mm) 120x70 120x70

Hole centres (mm) 90 90

Accuracy +/1% 1%

0 1.400 1.600

*CL 400 is supplied with 3/8” + 1/2” adaptors

163

TORQUE TOOLS

NEW

CAPTURE HUB Use: Quality Control (Power tool checks, line side checks, etc.) Calibration (In house calibrations, etc.) TOOL BENEFITS AND FEATURES

› Capture Family User layout / menus (Same operation as Capture Display) › Supplied with an in-house calibration certificate. UKAS calibration is available on request › Auto Filtering for power tools Intelligent software › On Board Memory – 50 Tools & 2000 Torque reading storage › Capture Manager software compatibility for certificate generation › Rundown adaptors - Hard, medium and soft joint supplied › Capture Sensor connectivity – ability to connect external sensors, plug n play › Clear easy to read display, with limits warnings

Code 036910 036920 036930 036930 TBC

Description CH1 CH2 CH5 CH25 CL3000

Nm 0.1-1 0.2-2 0.5-5 2.5-25

Accuracy +/1% 1% 1% 1%

„ a 1/4 1/4 1/4 3/4

HxWxD 50 x 200 x 110 50 x 200 x 110 50 x 200 x 110 50 x 200 x 110

0 1.190 1.190 1.190 1.200

NEW

CAPTURE DISPLAY AND SENSOR Use: Quality Control (line side checks, etc.) Calibration (Calibration houses, in house calibrations, certificate generation, etc.)

TOOL BENEFITS AND FEATURES

› Capture Family User layout / menus (Same operation as Capture Display) › Sensors supplied with a UKAS calibration to BS7882 Class 1 or better › On Board Memory – 500 Tools & 2000 Torque reading storage › Capture Manager software compatibility for certificate generation › USB connection for data transfer › Clear easy to read display, with limits warnings › Capture Display integrates with competitors’ 2mV/V sensors / transducers, plug n play › Battery or Mains powered

Code 038802 038805 038807 038810 038815 038820 038825 038830 038835 038845

164

Description CS1.5 CS2 CS5 CS10 CS25 CS50 CS100 CS250 CS500 CS1500

Nm 0.1-1.5 0.2-2 0.5-5 1-10 2.5-25 5-50 10-100 25-250 50-500 150-1500

Accuracy +/1% 1% 1% 1% 1% 1% 1% 1% 1% 1%

„ a 1/4 1/4 1/4 1/4 3/8 3/8 1/2 1/2 3/4 1

HxWxD 62 x 85 x 65 62 x 85 x 65 62 x 85 x 65 62 x 85 x 65 62 x 85 x 65 62 x 85 x 65 62 x 85 x 65 82 x 120 x 87 82 x 100 x 87 100 x 165 x 134

0 0.500 0.500 0.500 0.500 0.500 0.570 0.600 1.450 1.600 4.000

Code 038700 038703 036246 036226 038710

Description Capture Display 4 way switch (allows 4 sensors to connect to display) Capture Cable (Capture Display to Capture Sensor) Capture Cable (Capture Display to Custom Sensor) Capture Manager Software

HxWxD 80 x 170 x 140 80 x 170 x 140

0 0.780 0.700

End fittings 9x12 / 14x18 SE 9x12

7112 / 7118 RECTANGULAR OPEN END FITTING

14x18

9x12-14x18 7112-13 7118-19

› For accessing bolts in cramped and hard-to-reach locations, easy to change. › Forged. › Chrome Vanadium steel, matt chrome plated. › With eject-pin for unlocking.

Code 7688390 7688550 7679050 7688630 7688980 7679560 7689010 7689360 7689440 7679990 7689600 7684560 7689790

No. 7112-07 7112-08 7112-09 7112-10 7112-11 7112-12 7112-13 7112-14 7112-15 7112-16 7112-17 7112-18 7112-19

! 7 8 9 10 11 12 13 14 15 16 17 18 19

: 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12

4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7.5 7.5 7.5 7.5 7.5 7.5

r 20.0 21.5 23.0 24.5 26.0 27.5 29.0 31.0 33.0 35.0 37.0 39.0 41.0

Depth gauge 17.5 17.5 17.5 17.5 17.5 17.5 17.5 20.0 20.0 20.0 20.0 20.0 20.0

0 0.035 0.035 0.035 0.040 0.030 0.035 0.035 0.040 0.040 0.045 0.050 0.060 0.060

Code 7689870 7690020 7690100 7685610 7690370 7686180 7690450 7686420 7690610 7690880 7690960 7691260 7687740

No. 7118-13 7118-14 7118-15 7118-16 7118-17 7118-18 7118-19 7118-21 7118-22 7118-24 7118-27 7118-30 7118-32

! 13 14 15 16 17 18 19 21 22 24 27 30 32

: 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18

4 7 7 7 9 9 9 9 11 11 11 13 13 13

r 30.0 32.0 34.0 35.5 37.0 39.0 41.0 45.0 47.0 51.0 58.5 67.5 67.5

Depth gauge 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 32.5 32.5 32.5

7212 / 7218 RECTANGULAR RING END FITTING

0 0.120 0.120 0.120 0.130 0.130 0.130 0.130 0.155 0.150 0.170 0.185 0.220 0.220

9x12 14x18

9x12-14x18 7212-19 7218-19

› For accessing bolts in cramped and hard-to-reach locations, easy to change. › Forged. › Chrome Vanadium steel, matt chrome plated. › With eject-pin for unlocking.

*WHILE STOCKS LAST Code 7691340 7691420 7691690 7691770 7677940 7691930 7692230 7692580 7678080 7692740 7678160 7692820 7678240

No. 7212-07 * 7212-08 * 7212-10 * 7212-11 * 7212-12 * 7212-13 * 7212-14 * 7212-15 * 7212-16 * 7212-17 * 7212-18 * 7212-19 * 7212-21 *

! 7 8 10 11 12 13 14 15 16 17 18 19 21

: 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12 9 x 12

4 8 8 8 8 12 12 12 12 13 13 13 13 15

r 13.0 14.2 17.2 18.6 20.0 21.5 23.0 24.0 26.0 27.0 28.5 30.5 33.0

Depth gauge 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5

0 0.030 0.035 0.040 0.030 0.035 0.035 0.040 0.040 0.040 0.040 0.040 0.040 0.040

Code 7693120 7693390 7693470 7678320 7693630 7678830 7693710 7678910 7693980 7694280 7694440 7694790 7695920

No. 7218-13 7218-14 7218-15 7218-16 7218-17 7218-18 7218-19 7218-21 7218-22 7218-24 7218-27 7218-30 7218-32

! 13 14 15 16 17 18 19 21 22 24 27 30 32

: 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18 14 x 18

4 12.0 12.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 15.0 17.5 17.5 17.5

r 21.5 23.0 24.2 25.7 27.2 28.5 30.5 33.0 34.5 37.5 41.5 45.0 47.5

Depth gauge 25 25 25 25 25 25 25 25 25 25 31 31 31

0 0.120 0.120 0.120 0.125 0.125 0.125 0.125 0.140 0.140 0.140 0.150 0.160 0.165

165

TORQUE TOOLS

9x12 14x18 7412 / 7418 RECTANGULAR REVERSIBLE RATCHET HEAD

9x12-14x18 › For accessing bolts in cramped and hard-to-reach locations, easy to change. › Forged. › Chrome Vanadium steel, matt chrome plated. › With eject-pin for unlocking. › Fine-toothed. › 7412 with return angle of 5 degrees › 7418 with return angle of 7 degrees › Maximum continuous load of ratchet according to DIN EN ISO 6789:2003 and/or maximum load of cavity. 7418

7412

Code 7672710 7686500 7687230 7687580 7687660

No. 7412-00 7412-01 7412-02 7418-02 7418-04

a" 1/4 3/8 1/2 1/2 3/4

: 9 x 12 9 x 12 9 x 12 14 x 18 14 x 18

4 16.6 23.2 24.2 28.8 35.5

r 25 34 34 47 64

Depth gauge 17.5 17.5 17.5 25 33

0 0.060 0.140 0.150 0.350 0.780

754 RATCHET HEAD 1/2“-1“ › Enables controlled torque tightening in combination with a DREMOMETER torque wrench. › Forged. › Made from Chrome Vanadium steel. › Fine-pitched, sturdy ratchet head. › With 1/2”, 3/4” and 1” output square drive. › For clockwise tightening.

Code 7680650 7680730 7680810

166

No. 754-02 754-04 754-06

a„ 1/2 3/4 1

0 0.350 1.00 2.50

TORQUE MULTIPLIERS

0 D V 0 2.

0N 30 Ratio lb 1 t 50 t pu 9 u O . x a M Torque

f·f

Se rie n-N o o. M de l To ax. 2 0 I 11 rq np ue ut 2 70 N·m 200 l bf·f t

·m

DREMOPLUS ALU

Safety Plus Your advantage › The slender, lighter structure of the appliances ensures convenient and safe working – even where conditions are particularly cramped. › Repetition-accurate and precise results – supported by individual factory test certificates – ensure a maximum degree of job safety. › High degree of resilience and long life of the appliances attributable to a low-backlash planet gear with Ceramic-Teflon® coating. › A 30%+ lighter steel housing thanks to the use of high-performance aluminium. › Each multiplier‘s torque range is checked at the factory and provided with an individual factory test certificate. › Precise, reliable figures – even under extreme climatic conditions › Easy to operate: The most common input/output torques on the torque multiplier.

167

TORQUE MULTIPLIERS TOOLS

PRODUCT OVERVIEW TORQUE MULTIPLIERS Range Nm tested and certificated

Reaction arm

Ceramic-Teflon® coating

Ratio

Slipper non-destructive

Output drive

Shearing square

Drive

Sun gear

Accuracy + / DVV-13 Z

1/2"

3/4"

1:5

250 – 1.300Nm

DVI-20 Z

3/4"

1:4

500 – 2.000Nm

DVI-20L

3/4"

1:4

500 – 2.000Nm

DVI-28Z

3/4"

1:5,5

500 – 2.800Nm

DVI-28L

3/4"

1:5,5

500 – 2.800Nm

DVV-40Z

1/2"

1:16

500 – 4.000Nm

DVV-40ZRS

1/2"

1:16

500 – 4.000Nm

DVV-60ZRS

3/4"

1.1/2"

1:18

700 – 6.000Nm

DVV-80ZRS

3/4"

1.1/2"

1:22

750 – 8.000Nm

DVV-100ZRS

3/4"

1.1/2"

1:28,5

1.000 – 10.000Nm

DVV-130ZRS

3/4"

1.1/2"

1:39

1.200 – 13.000Nm

DVV-540RS

3/4"

2.1/2"

1:175

–

7.000 – 54.000Nm

Series / Type

168

Anti-wind-up ratchet

DREMOPLUS ALU

Overload safety mechanism

Choosing the right reaction arm Reaction arm Z-form

› A flexible offset reaction arm which has proven itself as the standard solution. › Anchor points are, for instance, adjoining screws, walls, machine parts and other ›

stable abutments. This reaction arm can be ideally used where conditions are quite cramped.

Choosing the right reaction arm Reaction arm L-form

› This straight reaction arm with adjustable reaction square is admirably suited for flange screw connections.

› The L-form reaction arm‘s support has a larger radius than the Z-form.

The L-form is also ideal for those points above the screwtightening level. However, the resulting tilting moment causes the maximum permitted torque to drop by 20%.

Choosing the right torque assembly tool for screws and nuts › It is vital that use is made of a torque wrench complete with ratchet function

(integrated or separate) for torque multipliers without anti-wind-up ratchet.

› For models with an anti-wind-up ratchet, we recommend the use of torque tools complete with ratchet function (integrated or separate) for ease of working.

169

TORQUE MULTIPLIERS TOOLS

DREMOPLUS ALU FAMILY 3 DVV-13Z

1/2" input square.

Lightweight: High-performance aluminium housing is 30% lighter than a steel one. Low backlash, single-stage planet gear for a long service life.

Flexible: With detachable Z-form reaction arm; can be optionally retrofitted with long reaction arm incorporating an adjustable reaction square (L-form) of lightweight metal.

Output square 3/4" with drill hole for impact sockets with safety pin and ring. Reaction arm: Forged reaction arm absorbs any arising counter force.

100% quality check › Delivery includes factory test certificate › The most common input/output torques on the torque multiplier.

The GEDORE maintenance service promoting service life and safety › Regular maintenance can considerably lengthen the service life of your GEDORE torque multiplier and also contribute to your safety.

› Maintenance involves our qualified personnel examining the individual components, testing their functional precision and verifying the factory certificate.

› In such an instance, we would gladly give you a quote. › We will, of course, continue to support you should you have any questions on and problems with the

170

·m

9 00 6 00 1 D V 0 7. 1: N 0 0 l bf Ratio 40 t t pu 2 9 3 0 Max.Ou Torque

·f t

Se M rienNo. M od To ax. el 2 011 rq Inp ue ut 3 00 N·m 220 l bf·f t

former DREMOPLUS models - just get in touch with us !

› Should a guarantee case arise - then either hand the appliance to your dealer or send it directly to your nearest Gedore agency.

DVV-13Z TORQUE MULTIPLIER DREMOPLUS ALU 1300Nm / 950lbf·ft Particularly suitable for:

› Industry, construction sites, car and truck garages, agricultural technology. › Bridge, aircraft and railway construction, ship building, refineries. › Machinery and plant engineering, maintenance. Features:

› Mechanical hand torque multiplier for controlled screw tightening and loosening.

› With a single-stage planet gear. › High-performance aluminium housing. › With Z-form offset reaction arm of Chrome Vanadium steel. › Can be optionally retrofitted with L-form straight reaction arm – with adjustable reaction arm – of lightweight metal.

› Multiplication at the ratio of 1:5. › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 1 model for a maximum load of around a maximum 1300Nm. › Also available as set (No. DVV-13ZG) with three different impact sockets – sizes 27, 30, 32mm. › Output square with drill hole for impact sockets with safety pin and ring. Scope of delivery:

› Torque Multiplier DREMOPLUS ALU. › With Z-form offset reaction arm. › Delivery in sturdy shipping case with foam insert. › Factory test certificate and setting table. › Detailed technical information is available on request.

DVV-13Z

DVV-13ZG

DVV-13Z Code

No.

2653370 DVV-13Z

< max. Nm Output

< max. lbf·ft Output

„ Q C

„ a D

Cmin

Cmax

Dmin

Dmax

1300

950

1:5

1/2

3/4

133

165

173

; max. Nm Input $ 270

; max. lbf·ft Input $ 200

0 1.900

OPTIONAL ACCESSORIES Code No. 2653400 RL-DVV13 *

Description Reaction arm L-form straight for DVV-13, 3/4“

A 80

B 133

Cmin 60

Cmax 159

0 0.800

171

TORQUE MULTIPLIERS TOOLS

DREMOPLUS ALU FAMILY 2 DVI-20L/Z AND DVI-28L/Z

3/4" input square

Lightweight: High-performance aluminium housing is 30 % lighter than a steel one.

Low backlash, single-stage planet gear for a long service life

A Z-form forged reaction arm of chrome-vanadium steel absorbs any arising counter-force.

Output square 1" with drill hole for impact sockets with safety pin and ring

Overload safety mechanism achieved from a classic shearing square

DVI-20Z and DVI-28Z › Reaction arm Z-form offset › fix integrated

DVI-20L and DVI-28L › Reaction arm L-form with adjustable reaction square drive › fix integrated

100% quality check

1:4 2.000 N-M 172

1:4 2.000 N-M

9 00 6 00 1 D V 0 7. 1: 0N f 00 Ratio lb t4 t pu 2 9 3 0 Max.Ou Torque ·m

on the torque multiplier

Se M rienNo. M od To ax. el 2 011 rq Inp ue ut 3 00 N·m 220 l bf·f t

·f t

› Delivery includes factory test certificate › The most common INPUT/OUTPUT torques

1:5,5 2.000 N-M

DVI-20L/Z & DVI-28L/Z TORQUE MULTIPLIER DREMOPLUS ALU 2000-2800Nm / 1500-2050lbf·ft

Particularly suitable for:

› Industry, construction sites, car and truck garages, agricultural technology, construction machinery. › Bridge, aircraft and railway construction, ship building, refineries. › Machinery and plant engineering, maintenance. Features:

› Mechanical hand torque multiplier for controlled screw tightening and loosening.

› With a single-stage planet gear. › High-performance aluminium housing. › Multiplication at the ratio of 1:4, 1:5.5. › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 2 models for maximum load in the range between maximum 2000Nm and 2800Nm. › Z model: with Z-form, offset reaction arm of Chrome Vanadium steel. › L model: with L-form straight reaction arm - with adjustable reaction square - of lightweight metal. › Output square with drill hole for impact sockets with safety pin and ring.

DVI-28Z

Scope of delivery:

› Torque Multiplier DREMOPLUS ALU. › With firmly integrated reaction arm of a Z- or L-form depending on model. › Delivery in sturdy shipping case with foam insert. › Factory test certificate and setting table. › Detailed technical information is available on request.

DVI-28L

Code

No.

< max. Nm Output

< max. lbf·ft Output

Reaction arm

„ Q C

„ a D

Cmin

Cmax

2653265 2653273 2653249 2653257

DVI-20Z DVI-28Z DVI-20L DVI-28L

2000 2800 2000 2800

1500 2050 1500 2050

1:4 1:5,5 1:4 1:5,5

offset offset straight straight

3/4 3/4 3/4 3/4

1 1 1 1

88 106 88 106

131 146 131 146

100 100 73 83

150 150 152 199

; max. Nm Input $ 580 550 580 550

; max. lbf·ft Input $ 430 410 430 410

0 2.900 3.900 3.000 4.100

OPTIONAL ACCESSORIES:

Code No. 2653303 RL-DVI20 * 2653338 RL-DVI28 *

Description Reaction arm L-form straight for DVI20, 1“ Reaction arm L-form straight for DVI28, 1“

0 1.200 1.700

173

TORQUE MULTIPLIERS TOOLS

DREMOPLUS ALU FAMILY 1 DVV-40Z, DVV-40ZRS - DVV-540RS 1/2" or 3/4" input square. Convenient: Integrated RS anti-wind-up ratchet for safe working. Bi-directional (apart from model DVV-40Z).

Overload safety mechanism: Non-destructive overload safety mechanism - Slipper - filed as a patent. Triggers overload at 10% and then clicks into place again. Clockwise and anti-clockwise.

Lightweight and slim: High-performance aluminium housing is 30% lighter than a steel one. A ceramic and teflon coating of the tooth flanks constantly lubricates the gear with a minimal grease.

Low backlash, 2-stage planet gear for a long service life.

A Z-form forged reaction arm of chrome vanadium steel absorbs any arising counter-force. Optional: L-form reaction arm on request.

Stable, shuttle-impacted gear housing.

Flexible: With detachable Z-form reaction arm, can be optionally retrofitted with L-form reaction arm and adjustable reaction square.

A 1", 1.1/2" or 2.1/2" output square with drill hole for impact sockets with safety pin and ring.

100% quality check on the torque multiplier.

1:16 4.000Nm

174

1:18 6.000Nm

9 00 6 00 1 D V 0 7. 1: 0N f 00 Ratio lb ut 4 3 0 p t u O 29 Max. e Torqu ·m

Se M rienNo. M od To ax. el 2 011 rq Inp ue ut 3 00 N·m 220 l bf·f t

·f t

› Delivery includes factory test certificate. › The most common input/output torques

1:22 8.000Nm

1:28.5 10.000Nm

1:39 13.000Nm

1:175 54.000Nm

DVV-40Z & DVV-40ZRS TORQUE MULTIPLIER DREMOPLUS ALU 4000Nm / 2930lbf·ft Particularly suitable for:

› Machinery and plant engineering. › Cable cars, lifts and masts. › Heavy industry, construction sites. › Bridge construction. › Ship building, aircraft and railway construction. › Refineries, plastics industry. › Power plants of all kinds. Features:

› Mechanical hand torque multiplier for controlled screw tightening and loosening.

› With a two-stage planet gear. › High-performance aluminium housing. › Torque multiplication ratio: 1:16. › DVV-40ZRS model with anti-wind-up ratchet (RS). › With non-destructive Slipper overload safety mechanism

DVV-40Z

for gear protection - clockwise and anti-clockwise.

› Z-form, offset reaction arm depending on model made of Chrome Vanadium steel. › Can be optionally retrofitted with L-form straight reaction arm with adjustable reaction arm - of lightweight metal.

› Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 2 models for a maximum load of around a maximum 4000Nm. › Output square drive with a drill hole for sockets or impact sockets with safety pin and ring.

Scope of delivery:

DVV-40ZRS

A Q

a Cmin. Cmax.

*WHILE STOCKS LAST / INDENT ONLY Code

No.

2653087 DVV-40Z 2653109 DVV-40ZRS

< max. Nm Output

< max. lbf·ft Output

„ Q C

„ a D

Cmin

Cmax

Dmin

Dmax

4000 4000

2930 2930

1:16 1:16

1/2 1/2

1 1

88 88

212 227

71 71

136 136

250 264

256 270

; max. Nm Input $ 300 310

; max. lbf·ft Input $ 220 230

0 5.400 5.700

OPTIONAL ACCESSORIES: Code No. 2653184 RL-DVV40 *

Description Reaction arm L-form straight for DVV40, 1“

A 88

B 212

Cmin 86

Cmax 234

0 1.700

175

TORQUE MULTIPLIERS TOOLS

DVV-60ZRS - DVV-130ZRS TORQUE MULTIPLIER DREMOPLUS ALU 6000-13000Nm / 4400-9530lbf·ft

Particularly suitable for:

› Mechanical hand torque multiplier for controlled screw tightening and loosening.

› With a two-stage planet gear. › High-performance aluminium housing. › Torque multiplication ratio: 1:18, 1:22, 1:28.5, 1:39. › All models with anti-wind-up ratchet (RS). › With non-destructive Slipper overload safety mechanism for gear protection - clockwise and anticlockwise.

› Z-form, offset reaction arm depending on model made of Chrome Vanadium steel. › Can be optionally retrofitted with L-form straight reaction arm - with adjustable reaction arm - of lightweight metal.

› Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 4 models for maximum load between 6000Nm and maximum 13000Nm. › Output square drive with a drill hole for sockets or impact sockets with safety pin and ring.

Scope of delivery:

› Torque Multiplier DREMOPLUS ALU › With Z-form offset reaction arm › Delivery in sturdy shipping case with foam insert › Factory test certificate and setting table › Detailed technical information is available on request A Q

a Cmin. Cmax.

*WHILE STOCKS LAST / INDENT ONLY Code

No.

< max. Nm Output

< max. lbf·ft Output

„ Q C

„ a D

Cmin

Cmax

Dmin

Dmax

2653117 2653125 2653133 2653141

DVV-60ZRS * DVV-80ZRS * DVV-100ZRS * DVV-130ZRS *

6000 8000 10000 13000

4400 5870 7330 9530

1:18 1:22 1:28,5 1:39

3/4 3/4 3/4 3/4

1.1/2 1.1/2 1.1/2 1.1/2

102 128 142 175

257 277 292 306

110 110 120 (126)

190 190 216 (229)

316 338 350 (372)

324 342 356 (379)

; max. Nm Input $ 400 420 410 380

; max. lbf·ft Input $ 300 310 305 280

0 10.500 13.400 13.900 20.900

OPTIONAL ACCESSORIES: Code No. 2654091 RL-DVV60-80 *

176

Description Reaction arm L-form straight for DVV60-80, 1.1/2“

A 102/128

B 256,2/276,5

Cmin 120/120

Cmax 315/315

0 4.000

DVV-540RS TORQUE MULTIPLIER DREMOPLUS ALU 54000Nm / 40330lbf·ft

Particularly suitable for:

› Heavy industry. › Oil industry. › Petrochemicals. Features:

› Mechanical hand torque multiplier for controlled screw tightening and loosening. › With a three-stage planet gear. › High-performance aluminium housing. › Chrome Vanadium steel reaction arm. › Multiplication at the ratio of 1:175. › With anti-wind-up ratchet (RS). › With non-destructive Slipper overload safety mechanism for gear protection - clockwise and anti-clockwise.

› With fixture for welding on a reaction arm (optional). › Guaranteed accuracy: Better than +/- 3% tolerance. › For operation in combination with a torque wrench. › 1 model for a maximum load of around a maximum 54000Nm. › Output square drive with a drill hole - for sockets or impact sockets with a safety pin and ring.

Scope of delivery:

› Torque Multiplier DREMOPLUS ALU. › Delivery in a sturdy crate on pallet. › Setting table. › Detailed technical information is available on request.

*WHILE STOCKS LAST / INDENT ONLY Code

No.

2653168 DVV-540RS *

< max. Nm Output

< max. lbf·ft Output

„ Q C

„ a D

54000

40330

1:175

3/4

2.1/2

270

415

; max. Nm Input $ 380

; max. lbf·ft Input $ 280

0 64.500

SPECIAL REACTION ARMS AS WELL AS TECHNICAL ADVICE CAN BE OBTAINED ON REQUEST.

› Please contact us with any queries and for advice. › Your query is our priority.

177

PULLERS 178 - 187

178

PULLERS

UNIVERSAL PULLERS 180

HSP SPINDLES 182

SAFETY COVER 183

NUT SPLITTERS 183

STUD EXTRACTORS 183

SPECIAL PULLERS 184

EXTRACTOR SETS 185

PULLER KITS 185

PEGBOARD KITS 186

PULLERS

Universal Pullers

8220 TWIN GRIP PULLERS

8220P 8220-20HSP

› For the safe and fast removal of discs, pulleys, wheels, ball bearings etc. › Strong drop forged design. › Reversible hooks permit use as an internal or external puller. › Available in standard length or with extensions for extra length. 8220-20

*WHILE STOCKS LAST Code 040150 040180 040210 040160 040190 040220

No 8220-10 8220-20 8220-30 * 8220-10L 8220-20L 8220-30L *

Code 040170 040200 040230

No 8220-10P 8220-20P 8220-30P

Running Depth 105 160 210 200 310 410

Max. Opening 110 180 280 110 180 280

0 1.200 3.100 8.500 1.800 4.500 11.600

y 151 220 308

0 0.900 2.00 5.00

Code 040460 040470 040480 040490

No Running Depth 90 8220-20HSP1 Puller & Spindle * 100 8220-30HSP3 Puller & Spindle * 90 8220-20L HSP1 Puller & Spindle * 100 8220-30L HSP3 Puller & Spindle *

Max. Opening 180 280 180 280

8562 TWIN GRIP PULLERS

8563 TRIPLE GRIP PULLER

› For removing small parts such as battery terminals, pulleys, wheels, ball bearings etc.

Code 040427 040428

180

No 8562-1 8562-2

Running Depth 50 70

Max. Opening 60 70

0 0.200 0.220

Code 040417

No 8563-1

Running Depth 55

Max. Opening 60

0 3.600 9.900 5.100 13.100

0 0.310

8564 TWIN GRIP PULLERS

8565 TRIPLE GRIP PULLERS

*WHILE STOCKS LAST Code 040010 040030 040050 040440

No 8564-2 8564-3 8564-4 8564-4 HSPIL Puller & Spindle *

Running Depth 100 140 200 105

Max. Opening 110 150 200 200

0 1.000 1.900 2.300 3.700

8566 TWIN GRIP PULLERS

Code 040020 040040 040060 040450

No 8565-2 8565-3 8565-4 8564-4 HSPIL Puller & Spindle

Running Depth 80 140 200 105

Max. Opening 120 160 220 220

0 1.300 2.500 4.000 4.600

8567 TRIPLE GRIP PULLERS › Suitable for industrial purposes and heavy agricultural as well as construction machines.

*WHILE STOCKS LAST

*WHILE STOCKS LAST Code 040070 040080 040495 040500

No 8566-1 8566-2 8566-1 HSP3 Puller & Spindle * 8566-2 HSP3 Puller & Spindle *

Running Depth 300 400 105 110

Max. Opening 300 400 300 370

0 9.800 10.800 10.100 11.100

Code 040090 040100 040505 040510

No 8567-1 8567-2 8567-1 HSP3 Puller & Spindle * 8567-2 HSP3 Puller & Spindle

Running Depth 400 400 110 110

Max. Opening 350 420 345 350

8568 TWIN GRIP PULLERS

8569 TRIPLE GRIP PULLERS

› Heavy duty model for the removal

of discs, pulleys, wheels, ball bearings etc.

Code 040110 040130

No 8568-1 8568-2

0 11.900 13.000 12.100 13.300

of discs, pulleys, wheels, ball bearings etc.

Running Depth 100 140

Max. Opening 150 200

0 0.800 1.900

Code 040120 040140

No 8569-1 8569-2

Running Depth 80 140

Max. Opening 150 200

0 1.100 2.700

181

PULLERS

HSP GREASE HYDRAULIC PRESSURE SPINDLE The grease hydraulic pressure spindle has been designed for controlled and safe extraction forces of up to 15t.

Preperation for use:

› Before using, check whether the pressure spindle is screwed far enough out of the cap,

› Place the puller into position and pre-tension the spindle body using a size 32mm or 41mm

› Unscrew the cap from the spindle body. First slacken off the grub screw. › Screw the spindle body into the crossbeam of the puller from below until the body protrudes

› Screw the pressure spindle size 12mm or 17mm into the cap. The hydraulic process will come into

›

so that the pressure pad is in the initial position in the hydraulic cylinder.

approximately 60mm from the crossbeam. Screw the cap onto the spindle body until it stops and then fix it in position by turning in the grub screw.

Hydraulic bolt

wrench.

play. The workpiece that has been loosened by the hydraulic force may be pulled off completely by turning the spindle body with the 32mm or 41mm cap. After use, the pressure spindle (size 12mm or 17mm) is turned back into its initial position and the pressure pad is pushed into the hydraulic cylinder.

Grub screw

Adjusting cap nut

Hydraulic spindle

Tip

Ball Ø 9/16“ or 5/8“

1.15 TRIPLE GRIP PULLERS

HSP GREASE HYDRAULIC PRESSURE SPINDLES

› Heavy duty model for the removal of discs, pulleys, wheels, ball bearings etc.

› The grease hydraulic pressure spindle has been designed for controlled and safe pulling work and is set up for a pressure of up to 15t.

*WHILE STOCKS LAST Code

Running Depth

Max. Opening

8006190 1.15/1

140

130

0 1.200

8006350 1.15/2

210

200

3.300

182

Code No 040350 HSP1L * 040360

HSP1

040400

HSP3 *

Force Capacity 6-ton - Twin Grip 10-ton - Triple Grip 6-ton - Twin Grip 8-ton - Twin Grip 12-ton - Twin Grip 15-ton - Triple Grip

Puller Ref. 8564-4 8565-4 8220-20 8220-20L 8220-30 8220-30L 8566-1 8566-2 8567-1 8567-2

0 1.300 1.200 3.300

Special Tools

1.26/HYD NUT SPLITTERS

5.10 SAFETY COVER

hydraulic

› At pulling forces of 18t, these PVC safety covers provide maximum active safety › › › › › › › ›

protection from suddenly detaching ball bearings, driving pinions or small parts. The safety covers are extremely flexible, making them suitable for all applications. Dimensions 510 x 915mm. Double-ply welded = double safety (total thickness at 0.5mm = 1.0mm). Tear strength: longitudinal 23N/mm2 - lateral 21N/mm2. Two straps for variable adjustment. Press stud fasteners for added safety - no flapping ends. UV resistant. Temperature resistant at -25 °C to +50 °C. Supplied in a carry bag which guarantees a long service life.

› With strong chisel, additionally induction

› Channel walls rolled, thus mirror-smooth and

› ›

› For nuts up to property class 10. › Chisel replaceable. › For splitting jammed or stripped nuts without .

›

hardened. At the cutting edge for breakage resistance. The chamfer at the chisel's edge improves the splitting effect and prevents breakage. With smooth chisel function.

wear resistant.

damaging the bolt thread.

1.26/1 HYD

1.26/2 HYD

*WHILE STOCKS LAST Code No 1868195 5.10 *

0 1.500

8600 STUD EXTRACTORS

Code No 040790 1.26/1 040870 1.26/2

for nuts 7-22 mm, M4-M14 22-36 mm, M14-M24

$ 12 12

max. t 5.0 13.0

0 0.800 3.400

1.30/N INTERNAL EXTRACTORS with reinforced shoulder

› For inserting and removing studs. › Suitable for extremely short stud ends.

› For extremely tightly packed ball bearings,bearing races, bushes, shaft seals and circlips.

› The shoulder of the shell jaw must be applied behind the bearing.

*WHILE STOCKS LAST Code 041010 041020

No 8600-1 8600-2

Ø-Stud 4-10 8-25

0 0.290 0.570

Code 8012750 8012830 8012910 8013130 8013480 8013560 8013640 8013720

No 1.30/0 * 1.30/1 * 1.30/2 * 1.30/3 * 1.30/4 * 1.30/4A * 1.30/5 * 1.30/6 *

C 5-8 8-12 12-15 15-19 19-25 25-30 30-35 35-45

p M10 M10 M10 M10 M10 M10 M10 M14 x 1,5

$ 10 10 10 14 14 14 14 17

0 0.120 0.120 0.130 0.170 0.200 0.300 0.400 0.650

183

PULLERS

1.36 SUPPORT BRACE

1.40 SEPARATORS

› Operation: The counter-support brace is placed on

› For removing taper roller and ball bearings, inner

the housing and the spindle screwed onto the spindle of the internal extractor. The toggle is held firmly and the bearing extracted by tightening the nut.

› › ›

Code No 8016580 1.36 / 1 8016660 1.36 / 2

$ 27 32

p M10 M14 x 1,5

0 0.750 1.650

bearing races and other tightly-seated or thinwalled parts. Operation: The sharp edges of the separator blades are pressed behind the part and it is then withdrawn using the 1.38 puller. To avoid damage to delicate parts, the flat surfaces of the separator are used. This produces a large support surface that prevents deformation.

Code 8019680 8019760 8019840 8019920

No 1.40/0 1.40/1 1.40/2 1.40/3

AO 5-60 12-75 22-115 30-155

For puller 1.38/0 1.38/1 1.38/2 1.38/3

C M10 M10 M14x1,5 M18x1,5

1.38 SEPARATOR PULLERS

1.67 STEERING WHEEL PULLER

› These separator pullers are used together with the

for cars

›

bearing separators 1.40. The tension bolts are screwed into the threaded holes in the bearing separators.

0 1.100 3.600 2.300 4.400

› Contains 1 pair of short legs, 1 pair of long legs and a protective cap for the thread of the steering column.

Code 8017550 8017630 8017710 8017980

No 1.38/0 1.38/1 1.38/2 1.38/3

For separator 1.40/0 1.40/1 1.40/2 1.40/3

a 40-120 60-165 70-215 90-300

b 125 180 195 205

17 19 22 27

0 1.000 1.100 3.400 6.500

Code

8028240 1.67/1

Leg length up to 135

Clamping reach

$ 17

35-90

0 0.900

8551 BOLT EXTRACTOR SET

1.73 UNIVERSAL BALL JOINT PULLER

› Made from Chrome Vanadium steel-35HRC. › In sturdy plastic case.

› For removing ball joints on cars.

Operation

› Drill a central hole into the broken bolt. › Turn the bolt extractor to the left into the hole until it grips and removes the bolt.

› Always use the maxiumum extractor size.

Code No 6759890 8551-88 Bolt Extractor Set Sizes 12345678

184

0 0.724

Code

8030810 1.73/1

Clamping height 65

Fork Depth 24

O 23

0 0.730

1.85/1 PROFESSIONAL PLASTIC BEARING INSTALLATION SET › Sturdy plastic bearing installation set. › Impact resistant plastic is light but as robust ›

as metal variants. This set guarantees that the installed bearings will not suffer the damage that might have

Puller Kits

1100-1.04 UNIVERSAL PULLER SET

occured when working ‘metal to metal’.

in L-BOXX® 136

› Ensures no deformations of the bearing housings, sealing rings or shafts.

› Maximum capacity up to 5t. › 2- and 3-arm cross-beam. › With rigid and slim legs and extensions. › 12 different pullers can be combined. › External Ø up to 130mm, internal Ø up to 170mm with a 200mm clamping reach.

› 1100 CT2-1.04 to retrofit existing L-BOXX®es 136.

Code 2838362

No. 1100-1.04

Contents L-Boxx® 136 no. 1100L + Assortment no. 1100 CT2-1.04

0 6.300

*WHILE STOCKS LAST Code 1120778

No. 1.85/1 *

Contents 33 impact rings, 10-50mm for external Ø 26-110mm 3 aluminium impact sleeves 1 recoil-free bodywork hammer with nylon heads (1.2kg)

0 5.200

1.07/K PULLER SET with 9 legs

1101-1.29/3K BALL BEARING EXTRACTOR SET › Ball bearing extractor set for more than 40 ball › ›

bearings. For removing ball bearings that are both on a shaft and in a housing. Non-destructive removal of deep-groove ball bearings without dismantling the shaft; no need to drill open the bearing cage (no chippings).

› In plastic case. › Dimensions: 120 x 250mm.

› With Check-Tool insert. › Insert for use in drawers with minimum dimensions 340 x 260 x 60mm.

Code No. Contents max.t A $ 8117340 1.07/K 2-arm Cross Piece 2.5 M 14x1,5 x 140 17 3-arm Cross Piece 3 x Pulling Hooks - 100mm 3 x Pulling Hooks - 200mm 3 x Slim Pulling Hooks - 250mm

› In GEDORE i-BOXX® 72 No. 1101 L. › Dimensions: 367 x 316 x 72mm.

0 5.800

1.31 INTERNAL EXTRACTOR SET › For extremely tightly packed ball bearings, bearing races, bushes, shaft seals and circlips.

*WHILE STOCKS LAST Code 2964392

No. 1101-1.29/3K *

Contents 4 Heads with spindle no. 1.29/1-1.29/5 7 Heads with spindle no. 1.29/10-1.29/45 1 Handle no. 1.29/0

For ball bearing No. 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6403 6404 6405 6406 6407

0 5.800

Code 8014610

No. 1.31/1

Contents 6 internal extractors 12-46mm, No. 1.30/2 - /6 2 counter-support braces No. 1.36/1 - /2

0 6.400

185

PULLERS

2.20 TRUCK WORKSHOP KIT › Clearly arranged modular system on pegboard.

Code No. 1088718 2.20LKW

Contents 2-arm Cross Piece - 260mm 3-arm Cross Piece - 260mm 3 x Pulling Hooks - 100mm 3 x Pulling Hooks - 300mm 3 x Slim Pattern Pulling Hooks - 220mm Spindle Hydraulic Pressure Spindle Bearing Separator

0 25.000

Contents 4 x 2-arm cross pieces 140 180 220 260mm 4 x 3-arm cross pieces 140 180 220 260mm 2 x Spindles Hydraulic Pressure Spindle 6 x Pulling Hooks

0 19.600

Contents 2 x 2-arm Heads 2 x 3-arm Heads 3 x Pulling Hooks - 210mm 3 x Pulling Hooks - 260mm 3 x Pulling Hooks - 390mm 2 x Spindles Hydraulic Pressure Spindle

0 24.900

2.30 INDUSTRIAL PULLER KIT › For the assembly of 1.06 and 1.07 pullers. › Clearly arranged modular system on pegboard.

Code No. 1393014 2.30

2.40 CONSTRUCTION MACHINE KIT › For the assembly of 1.14 and 1.15 pullers. › Clearly arranged modular system on pegboard.

Code No. 1393030 2.40

186

INDUSTRIAL KIT

CAR WORKSHOP KIT

› Clearly arranged modular system on pegboard.

*WHILE STOCKS LAST Code 634840

No. Industrial Puller Kit *

Contents 8220-20 Universal Twin Grip Puller 8220-20P Extension 8565-4 Triple Grip Puller HSP 1 Hydraulic Pressure Spindle 8569-2 Universal Triple Grip Puller 8600-2 Stud Extractor 248 ST Recoil Free Hammer 1450S Tool Panel (Including Hooks)

Code 634859

0 19.600

No. Car Workshop Puller Kit

Contents 8220-10 Universal Twin Grip Puller 8220-10P Extensions 8562-2 Battery Terminal Puller 8565-2 Triple Grip Puller 8569-1 Universal Triple Grip Puller 8600-2 Stud Extractor 1.38-0 Separator Puller 1.40-0 Bearing Separator 1.73-1 Ball Joint Puller 1.75-1 Oil Filter Hook 248 ST Recoil Free Hammer 1450S Tool Panel (Including Hooks)

0 13.600

SAFETY NOTES PULLERS › Read the operating instructions! › Use only original spare parts and accessories for your Gedore puller. Never use worn, modified or ›

defective spare parts or accessories. Wear goggles and protective clothing when working. For added safety, use the Gedore safety cover 5.10!

› Before pulling, ensure that the legs are in contact with the part to be pulled and are firmly tightened so that the spindle operates centrally along the axis of the puller.

› Attention! When using a puller, forces of up to several tons are generated! Take care to ensure that the puller is correctly positioned and is vertical to the component being pulled.

› Do not use electric or pneumatic power or percussion drivers.

187

NON-SPARKING TOOLS 188 - 193

188

NON SPARKING TOOLS

SPANNERS / SETS 190

(1/2”) SOCKETS 191

(1/2”) ACCESSORIES 191

(1/4”) SOCKET SET 192

SCREWDRIVER SET 192

PIPE WRENCH 193

ADJUSTABLE WRENCH 193

COMBINATION PLIERS 193

SIDE CUTTERS 193

NON-SPARKING TOOLS

Non-Sparking Combination Spanners

GED0130 COMBINATION SPANNERS › With same size on each end. › Bi-hexagon ring.

Code 2510855 2510847 2510839 2510820 2509148 2509121 2509113 2509105 2509091 2509083 2509075 2509067 2509040

No. GED0130006S GED0130007S GED0130008S GED0130009S GED0130010S GED0130011S GED0130012S GED0130013S GED0130014S GED0130015S GED0130016S GED0130017S GED0130018S

! 6 7 8 9 10 11 12 13 14 15 16 17 18

y 130 130 135 150 150 150 190 190 190 210 210 210 230

0 0.050 0.055 0.0 55 0.0 95 0.085 0.0 90 0.170 0. 165 0. 160 0.230 0.230 0.220 0.330

Code 2509032 2509024 2509016 2509008 2508990 2508982 2508974 2508966 2508958 2508923 2508915 2508907 2508893

No. GED0130019S GED0130020S GED0130021S GED0130022S GED0130023S GED0130024S GED0130025S GED0130026S GED0130027S GED0130028S GED0130029S GED0130030S GED0130032S

! 19 20 21 22 23 24 25 26 27 28 29 30 32

y 230 230 250 250 250 270 270 270 280 280 280 300 300

0 0.330 0.325 0.360 0.355 0.350 0.500 0.475 0.470 0.665 0.680 0.630 0.730 0.650

GED0130 COMBINATION SPANNER SETS › Sets made up of the most popular sizes.

Code 2493551 2493578

No. GED0130003S-11 Pieces GED0130001S-12 Pieces

Contents 8 10 11 12 13 14 16 17 18 19 22 10 11 12 13 14 17 19 22 24 27 30 32

WHY THE NEED FOR NON-SPARKING TOOLS? The recommendation is to use GEDORE non-sparking tools in all areas where there are combustible or easily ignitable vapours, liquids and dusts as well as where sparks can potentially cause a fire or explosion.

› Made either from proven, low-sparking special bronze and copper/beryllium

› Using non-sparking tools must not be the only protective measure taken in

› › › ›

› It would be more accurate to refer to ‘low spark’ since ignitable sparks cannot

alloys or from other non-spark inducing materials. The spanners are cast and not forged for your own safety. Corrosion resistant, even against salt water. Copper/beryllium tools are non-magnetic. Non-sparking tools are not as hard as conventional ones and must be used with care.

190

aeas of fire or explosion risk.

be 100% prevented with the use of non-sparking tools.

0 2.200 4.100

Non-Sparking Sockets & Accessories 1/2“

GED035 HEXAGON SOCKETS 1/2“

› Hand operated.

Code 2496518 2496488 2496437 2496410 2523795 2523671 2523523 2523507 2523485 2523469 2523442 2523434 2523426

No. GED0350612S GED0350712S GED0350812S GED0350912S GED0351012S GED0351112S GED0351212S GED0351312S GED0351412S GED0351512S GED0351612S GED0351712S GED0351812S

! 6 7 8 9 10 11 12 13 14 15 16 17 18

y 40 40 40 40 40 40 40 40 40 40 40 40 40

0 0.050 0.055 0.050 0.050 0.050 0.050 0.050 0.050 0.055 0.055 0.060 0.065 0.075

Code 2523396 2523361 2523353 2523337 2523302 2517965 2523280 2523264 2523248 2523213 2523183 2523167 2523140

No. GED0351912S GED0352012S GED0352112S GED0352212S GED0352312S GED0352412S GED0352512S GED0352612S GED0352712S GED0352812S GED0352912S GED0353012S GED0353212S

GED0360 REVERSIBLE RATCHET 1/2

GED042 EXTENSIONS 1/2

› For hand operated sockets.

Code No. 2513684 GED0360012C

y 250

0 0.590

GED410 SWIVEL HANDLES 1/2

Code

No. 2506335 GED0420002S 2506270 GED0421434S 2506319 GED0420121S

1B COMBINATION SPANNERS

! 19 20 21 22 23 24 25 26 27 28 29 30 32

y 40 40 40 40 40 40 40 40 40 40 40 40 42

0 0.085 0.095 0.100 0.110 0.120 0.125 0.130 0.145 0.150 0.175 0.185 0.195 0.240

y 100 200 250

0 0.180 0.315 0.360

› For hand operated sockets.

Code No. 2507927 GED0410013S 2507897 GED0410016S

y 250 300

0 0.560 0.920

191

NON-SPARKING TOOLS

GED0400 SLIDING T-BAR 1/2

GED0400 UNIVERSAL JOINT 1/2

› For hand operated sockets.

Code No 2511886 GED0400114S

y 250

0 0.450

GED0430 SOCKET SET 1/2

Code No 2514788 GED0400118S

y 70

0 0.135

GED080 SCREWDRIVER SET 5 pieces

› In plastic case. › Picture may differ from actual product.

Code No. 2503239 GED0430002S

192

› Picture may differ from actual product.

Contents Reversible Ratchet 1/2” Extension 1/2” 150mm Sliding T-bar 1/2” 320mm Swivel handle 1/2” 380mm Sockets: 10 11 12 13 14 15 16 17 18 19 2 0 21 22 23 24 25 26 27 28 29 30 32mm

0 4.100

Code No. 2499061 GED0800002C

Contents 4,5x100mm 6x100mm 6x150mm 8x150mm PH1 PH2

0 0.515

Non-Sparking Wrenches/Pliers

GED053 PIPE WRENCH

GED048 ADJUSTABLE WRENCHES

› American pattern.

Code No 2517310 GED0530385S

y 385

0 1.370

Code 2503166 2503158 2503131

No GED0482000C GED0482500C GED0483000C

GED060 COMBINATION PLIERS

GED066 POWER SIDE CUTTERS

› With two-component handle.

Code No 2514753 GED0602000C

y 200

0 0.425

Code No 2522659 GED0662650C

y 200 250 300

0 0.200 0.400 0.700

y 190

0 0.290

193

APPRENTICE TOOLKITS 194 - 203

APPRENTICE TOOLKITS

CONSTRUCTION MACHINERY 196

ELECTRICIAN‘S & REFRIGERATION MECHANIC‘S 200

MECHANIC‘S / AUTOMOTIVE 198-199

APPRENTICE TRUNK 201

APPRENTICE TOOLKITS

CONSTRUCTION MACHINERY TOOLKIT

b c d e

For construction apprentices and tradesmen.

Code 668119

0 145.53

1525 Tool Trolley

8000-J2 Circlip Pliers

95-125, 150, 175 Flat Chisel

1425 Tool Chest

8250-200 JC Combination Pliers

116 Pin Punch Set

Foam Inserts 1525-41-1B 1525-41-400 1525-41-403 1525-41-4550 1525-41-D32 1525-41-8601 1525-27-62 1525-27-PH 1525-27-PL

8132-200 JC Telephone Pliers

4550-20 Torque Wrench

8316-200 JC Side Cutters

702-21M Feeler Gauge Set

8531-250 Tin Snips

R93000006 Key File Set

8601-500, 900 Ball Pein Hammers

R9455-05 Tape Measure - 5m

248-ST Reccoil Free Hammer

Scriber-MS/ST-190mm

R9250 Rubber Mallet

Digital Multimeter

62P 150, 450mm Adjustable Wrenches 145-10C Universal Pliers 137-250 Grip Pliers 8000-A2 Circlip Pliers

196

No. Construction Machinery Toolkit

Caliper-Vernier -150x0.02mm

3287 Sliding T-bar

IKS 20 PZ Sockets-PZ 1, PZ 2, PZ 3

File Thread Restorer

3293-U1 Reversible Ratchet

R4255 Allen Key Sockets-3, 4, 5, 6, 8, 10

403 Hacksaw

3296 Swivel Handle

IKS 20 PH Sockets-PH 0, PH 1, PH 2, PH 3

3081 L-Handle

R4510-50, 150mm Extensions

R4120 Female Torx-E5, E6, E7, E8, E10

3090-125, 250 Extensions

R45200022 Slidng T-bar

ITX19 Sockets-T20, T25, T27, T30, T40, T45, T50

3019 Adapter

R45300005 Universal Joint

TX19 Sockets-E10, E12

3095 Universal Joint

R40000027 Reversible Ratchet

TX30 Sockets-E5, E6, E7, E8

3087 Sliding T-bar

R4100 Sockets-4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

IN19 Sockets-5/16 AF, 3/8 AF, 1/2 AF, 9/16 AF, 5/8 AF

3093-Z94 Reversible Ratchet

D30 Sockets-8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 7/16 AF, 9/16 AF, 7/8 AF C19 Sockets- 8-5/16, 10-3/8, 11, 12, 13-1/2, 14, 15-19/32, 16-5/8, 17, 18-11/16, 19-3/4, 21-13/16, 22, 24-15/16, 26-1., 27-1.1/16, 29-1.1/8, 30-1.3/16, 32-1.1/4

1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32

D19 Sockets- 5/16 AF, 3/8 AF, 7/16 AF, 1/2AF, 9/16 AF, 5/8 AF, 11/16 AF, 3/4 AF, 13/16 AF, 7/8 AF, 15/16 AF, 1 AF, 1.1/16 AF, 1.1/8 AF

1B13A-1/4AF, 5/16AF, 3/8AF, 7/16AF, 1/2AF, 9/16AF, 5/8AF, 11/16AF, 3/4AF, 13/16AF, 7/8AF, 15/16AF, 1AF 400 Flare Nut Spanners-17x19, 22x24, 7/16x1/2, 9/16x5/8, 5/16x3/8

C32 Sockets-19-3/4, 22-7/8, 2415/16, 26-1, 27-1.1/16, 29-1.1/8, 301.3/16, 32-1.1/4, 33-1.5/16, 38-1.1/2, 41-1.5/8, 46-1.13/16, 50-2

42L-9M Long Allen Keys Set-1.5, 2, 2.5, 3, 4, 5, 6, 8, 10

3295 Universal Joint 3/4”

D32 Sockets-1.3/8 AF, 1.7/16 AF, 1.11/16 AF, 1.3/4 AF, 1.7/8 AF

2150 3C Screwdriver 4 6.5 10

3290-200, 400 Extensions

R4245 Male Torx-T10, T15, T20, T25, T27, T30, T40

2160 3C Screwdriver PH1 PH2 PH3

1995 Universal Pliers 1990-75,125,250 Extensions 1985 Speed Brace 1987 Sliding T-bar 1997-375 Swivel Handle 1993-U10T Reversible Ratchet

1.1/4AF, 1.5/16AF, 1.3/8AF, 1.1/2AF, 1.1/8 AF, 1.1/16 AF

42-9P Allen Keys Set-1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”

197

APPRENTICE TOOLKITS

MECHANIC‘S TOOLKIT

For diesel, forklift, motor, tractor, motorcycle, diesel fuel injection mechanic, diesel fitter apprentices and tradesmen.

Code 668036

198

No. Mechanic’s Toolkit

1410 Tool Chest

Round File-250

1985 Feeler Gauge Set

D19 Sockets- 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 23, 24, 26, 27, 28, 30, 32 1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 534 Swivel Head Spanners-10, 11, 12, 13, 14, 15, 16, 17, 19

Half-Round File-250

1987 Speed Brace

100-16 Centre Punch

1990-125, 250 Extensions

95-175, 200 Flat Chisel

1995 Universal Joint

62P 200, 300mm Adjustable Wrenches

Stainless Steel Ruler-300mm

50-20,8mm Spark Plug Socket

8601-100, 700 Ball Pein Hammers

Engineer‘s Square-100mm

54-16mm Spark Plug Socket

248-ST Recoil Free Hammer

Engineer‘s Scriber 190mm

42-88M-2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10 Allen Keys Set

702-21M Feeler Gauge Set

42-88P-3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8” Allen Keys Set 116 Pin Punch Set

403 Hacksaw

2160 PH1 PH2

8000-J2 Circlip Pliers

2150 4 5.5 6.5 8 10

8132-200 JC Telephone Pliers

8531-250 Tin Snips

8250-200 JC Combination Pliers

36/1 Oil Filter Wrench

8316-200 JC Side Cutters

Safety Glasses

145-10C Universal Pliers

10pc Drill Bit Set

137-250 Grip Pliers

Thread Restorer

Oil Can-300

Flat File-250

1993-Z94 Reversible Ratchet

8000-A2 Circlip Pliers

0 41.50

Optional Extras 95-300 Flat Chisel Code: 8699370 0 0.560 R94420021 Vernier Code: 3301430 0 0.320 R9455-05 Tape Measure Code: 3301428 0 0.200 227-350 Pipe Wrench Code: 645346 0 1.62 Suction Lifter-19mm Code: 0120130 0 0.020 Suction Lifter-22mm Code: 0120120 0 0.020 Circuit Tester Code: 0120100 0 0.040 Tyre Pressure Gauge Code: 0120110 0 0.120 400-5M Flare Nut Spanner Set Code: 634026 0 0.710 INX19 PM-5D Allen Key Socket Set Code: 617989 0 1.32

AUTOMOTIVE ELECTRICIAN‘S TOOLKIT

b d

Code 668028

1410 Tool Chest

8250-200 JC Combination Pliers

1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 R49003046-46 Piece 1/4” Socket Set

8316-160 JC Side Cutters

No. Automotive Electrician’s Toolkit

0 35.50

Needle File Set-6 Piece

8132AB-160 TL Telephone Pliers 145-10C Universal Pliers

Tube Spanner Set-8x9, 10x11, 12x13, 14x15, 16x17, 18x19

62P 200 Adjustable Wrench

26-RS2 To be used with Tube Spanner Set

Heavy Duty Crimping Pliers

42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10

8516-250 Tin Snips

42-88P Allen Keys Set-3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

Wire Stripper

2160 PH1 PH2

Digital Multimeter

2150 4 5.5 6.5 8 116 Pin Punch Set

Stainless Steel Ruler-300

100-10, 16 Centre Punches

R93210000 Heavy-Duty Utility Knife

8601-700 Ball Pein Hammer

403 Hacksaw

267-40 Recoil Free Hammer

Safety Glasses

Circuit Tester

Engineer‘s Scriber

8132-160 JC Telephone Pliers

Box Wrench Set-8 Piece

Optional Extras 95-300 Flat Chisel Code: 8699370 0 0.400 95-200 Flat Chisel Code: 8698990 0 0.400 Junior Hacksaw Code: 3012000 0 0.100 134-250 Grip Pliers Code: 745995 0 0.570 R94420021 Vernier Code: 3301430 0 0.320 9534-05 Tape Measure Code: 3301428 0 0.200 1985 Speed Brace Code: 614335 0 0.585 50-20.8mm Spark Plug Socket Code: 636614 0 0.119 54-16mm Spark Plug Socket Code: 636622 0 0.096 702-21M Feeler Gauge Set Code: 6547950 0 0.070 D19HMZ Socket Set Code: 614610 0 1.93 10pc Drill Bit Set Code: 0120000 0 0.510

199

APPRENTICE TOOLKITS

b d

ELECTRICIAN‘S & REFRIGERATION MECHANIC‘S TOOLKIT

Code

No.

668001

Electrician’s & Refrigeration Mechanic’s Toolkit

1410 Tool Chest

8316-200 JC Side Cutters

Circuit Tester

1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 R49003046-46 Piece 1/4” Socket Set

8601-100, 700 Ball Pein Hammers

95-100 Flat Chisel

248-ST Recoil Free Hammer 145-10C Universal Pliers

D19HMZ Socket Set

62P 200, 300 Adjustable Wrenches

42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10

Heavy Duty Crimping Pliers

42-88P Allen Keys Set-3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

Wire Stripper

2160 PH1 PH2

Digital Multimeter

2150 4 5.5 6.5 8

200

116 Pin Punch Set

Stainless Steel Ruler-300

100-16 Centre Punches

R93210000 Heavy-Duty Utility Knife

Flat File-250

403 Hacksaw

Round File-250

Safety Glasses

Half-Round File-250

Engineer‘s Scriber

8132-200 JC Telephone Pliers

Box Wrench Set-8 Piece

8250-200 JC Combination Pliers

137-250 Grip Pliers

Optional Extras 95-200 Flat Chisel Code: 8698990 0 0.400 Engineer‘s Square Code: 0110200 0 0.133 R94100051 Spirit Level Code: 3301422 0 0.170 227-350 Pipe Wrench Code: 645346 0 1.62 R94420021 Vernier Code: 3301430 0 0.320 R9455-05 Tape Measure Code: 3301428 0 0.200 8000-A2 Circlip Pliers Code: 6701540 0 0.167 8000-J2 Circlip Pliers Code: 6703400 0 0.146

0 38.50

d c e

APPRENTICE TRUNK TOOLKIT › 4x Sliding trays with high-density foam inserts.

Code 668109

No. Apprentice Trunk Toolkit

0 48.63

1460 Tool Trunk

4550-20 Torque Wrench

D19 Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 23, 24, 26, 27, 28, 30, 32

1B 6 ,7, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 34, 36

403 Hacksaw

1997-450 Power Bar

8601-100 Ball Pein Hammers

1987 Sliding T-Bar

D32-EMZ 3/4“ Socket Set

1990 Extensions 125, 250mm

1B 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 7/8, 15/16, 1, 1.1/16, 1.1/8, 1.3/16, 1.1/4 8250-200 JC Combination Pliers 8132-200 JC Telephone Pliers

2160 PH1 PH2

8316-200 JC Side Cutters

2150 6.5 3-150 4-150 6.5-200

8000-A2 Circlip Pliers

42KL-9M 1,5 2 2,5 3 4 5 6 8 10

8000-J2 Circlip Pliers

702-21M Feeler Gauge Set

137-250 Grip Pliers 145-10C Universal Pliers

D30 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 3081 L-Handle

116 Pin Punch Set

3090 Extension 125mm

100-16 Centre Punches

3093Z-94 Ratchet

Flat File-250

1993Z-94 Reversible Ratchet

201

APPRENTICE CUSTOMISED TOOLKITS

GEDORE INDIVIDUAL PRECISE â&#x20AC;&#x201C; CUSTOMISED

Plastic references

High-density foam

Why not create your perfect tool assortment to match your corporate design requests and your process specifications. We look forward to hearing from you! All assortments are packed in high-density foam inserts or plastic references and will fit into an appropriate compartment of the GEDORE tool chests, trolleys or toolboxes. Minimum quantities apply.

202

Custom colour choices

Tidy, uncluttered look and always easily accessible › Ready to be used straight after delivery: simply unpack and screw on the handle. › Whether for mobile use or stationary, every tool has its place. › Modular arrangement systems make daily routine that much easier (no more

scratching for tools). › Compact tool assortments make for easy tool selection. › Customised equipment/tool sets in module systems and/or trolleys/benches in company design/colours.

ADVANTAGES: › Easy assessment of what tools to buy. › Spend less time ‘looking for tools’. › Tidier workplace. › Easy identification and easy access of the correct tool. › Easily check whether the toolset is complete. › Elimination of unnecessary tool purchases – no surplus

tool accumulation.

203

ARTISAN TOOLKITS 204 - 211

204

ARTISAN‘S TOOLKITS

ELECTRICIANS LIGHT CURRENT 206

ELECTRICIANS MEDIUM CURRENT 207

FARMER‘S 208

GENERAL ARTISAN‘S 209

TECHNICIAN‘S RUCKSACK 210

ELECTRICIAN‘S 211

ARTISAN TOOLKITS

ELECTRICIAN‘S LIGHT CURRENT TOOLKIT

Code

No.

0 32.20

668110 Electrician’s Light Current Toolkit

1410 Tool Chest

8316-160 JC Side Cutters

1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13

Universal Panel Key

62P 150 Adjustable Wrench

Digital Multimeter

42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10 60CP-250 Adjustable Wrench

Wire Stripper

2150 6.5 3-150 4-150 6.5-200

8601-500

2160 PH1 PH2

R9455-05 Tape Measure

145-10C Universal Pliers

403 Hacksaw

Junior Hacksaw

R95300017 LED Torch

137-250 Grip Pliers

R9321 Utility Knife

8133-180 JC Telephone Pliers 8250-200 JC Combination Pliers

206

ELECTRICIAN‘S MEDIUM CURRENT TOOLKIT

Code

No.

0 32.20

668113 Electrician’s Medium Current Toolkit

1410 Tool Chest

VDE 8314-140 H Side Pliers

1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13

Universal Panel Key

62P 150, 300mm Adjustable Wrenches

Digital Multimeter

42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10 Circuit Voltage Tester

Wire Stripper

VDE 2133 Nut Drivers 6, 7, 8, 9, 10, 11, 12, 13

8601-500 Ball Pein Hammer

VDE 2160 PH1 PH2

R9455-05 Tape Measure

VDE 2170 3.5 4 5.5 6.5

403 Hacksaw

145-10C Universal Pliers

R95300017 LED Torch

Junior Hacksaw

VDE 4522 Cable Knife

137-250 Grip Pliers

Heavy-Duty Crimping Pliers

VDE 8132-160 H Telephone Pliers

D19HMZ Socket Set

VDE 8250-200 H Combination Pliers

207

ARTISAN TOOLKITS

FARMER‘S TOOLKIT

Code

No.

0 32.40

668111 Farmer’s Toolkit

1335 Tool Box

Leather Gloves

50-20.8 Spark Plug Socket

1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 62P 300 Adjsutable Wrench

Digital Multimeter

95-250 Flat Chisel

42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 7, 8, 9, 10

8531-250 Tin Snips

38-500 Tyre Lever

403 Hacksaw

8601-900 Ball Pein Hammer

106 Chisel and Punch Set

2150 4 5.5 6.5 8

R9455-05 Tape Measure

C19TMZ Socket Set 1/2“

2160 PH1 PH2

Yale Padlock

R9321 Utility Knife

145-10C Universal Pliers

R95300017 LED Torch

227-350 Pipe Wrench

Junior Hacksaw

Fencing Pliers 8260-300

137-250 Grip Pliers

Flat File-250

8132-200 JC Telephone Pliers

Round File-250

8250-200 JC Combination Pliers

Half-Round File-250

8316-200 JC Side Cutters

208

702-20M Feeler Gauge Set

GENERAL ARTISAN‘S TOOLKIT

Code

No.

0 42.0

668112 General Artisan’s Toolkit

1410 Tool Chest

Flat File-250

Engineer‘s Scriber

1B Combination Spanners-6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 62P 300 Adjustable Wrench

Round File-250

Safety Glasses

Half-Round File-250

Engineer‘s Square

42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10

8601-700 Ball Pein Hammers

116 Pin Punch Set

8133-180 JC Triple Pliers

R9455-05 Tape Measure

R49003046-46 Piece 1/4” Socket Set

2150 4 5.5 6.5 8

267-40 Recoil Free Hammer

2160 PH1 PH2

R95300017 LED Torch

Vernier

145-10C Universal Pliers

8531-250 Tin Snips

95-250 Flat Chisel

403 Hacksaw

50-20.8 Spark Plug Socket

100-16 Centre Punch

137-250 Grip Pliers

C19HMZ Socket Set 1/2“

8132-200 JC Telephone Pliers

227-350 Pipe Wrench

8250-200 JC Combination Pliers

R9321 Utility Knife

8316-200 JC Side Cutters

Stainless Steel Ruler-300mm

209

ARTISAN TOOLKITS

TECHNICIAN‘S RUCKSACK TOOLKIT

Code

No.

0 8.61

668120 Technician’s Rucksack Toolkit

Gedore Rucksack

8316-200 JC Side Cutters

No.6 Open-Ended Spanners-6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 62P-200 Adjustable Wrench

R9321 Utility Knife SRC-C19Z-10 Socket Set 1/2“

42-7M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8

2150 6.5 3-150 4-150 6.5-200

R95300017 LED Torch

2160 PH1 PH2

8601-500 Ball Pein Hammer

145-10C Universal Pliers Leather Gloves

8250-200 JC Combination Pliers

210

ELECTRICIAN‘S TOOLSET

Code

No.

0 6.1

668122 Electrician’s Toolset

Electrician‘s Toolcase

VDE 8132-200 H Telephone Pliers

1B Combination Spanners-8, 10, 13, 17, 19

VDE 8250-200 H Combination Pliers

42-88M Allen Keys Set-2, 2.5, 3, 4, 5, 6, 8, 10

VDE 8314-160 H Side Cutters

Digital Multimeter

VDE 8098-160 H Stripping Pliers

8601-300 Ball Pein Hammer VDE 2160 PH1 PH2 PH3

R9455-05 Tape Measure

VDE 2170 4 5.5 6.5

R95300017 LED Torch

145-10C Universal Pliers

VDE 4522 Cable Knife

137-175 Grip Pliers

VDE 2133 Nut Drivers 4 6 8 10 13

62P Adjustable Wrench

211

MERCHANDISERS 212 - 215

212

Merchandiser Concepts

1-2-3 MERCHANDISER STAND CONCEPTS

THE PICTURES SHOWN ON THIS PAGE ARE FOR ILLUSTRATION PURPOSES ONLY. ACTUAL PRODUCTS MAY VARY DEPENDING ON CUSTOMERSâ&#x20AC;&#x2122; REQUIREMENTS.

OPTION 1 1 STAND MERCHANDISER Code No.

No. Code

Opening order Opening Order

Code

No.

Opening order

Code

No.

Opening order

1B-6mm

600040C

D19 13mm

613355C

62 / 250mm

636827

1B-7mm

600059C

D19 14mm

613363C

137/250mm

640670

1B-8mm

600067C

D19 15mm

613371C

145 / 250mm

641200

1B-9mm

600075C

D19 16mm

613398C

225 / 250mm

645036

1B-10mm

600083C

D19 17mm

613401C

534 10mm

651206C

1B-11mm

600091C

D19 18mm

613428C

534 11mm

651214C

1B-12mm

600105C

D19 19mm

613436C

534 12mm

651222C

1B-13mm

600113C

D19 20mm

613444C

534 13mm

651230C

1B-14mm

600121C

D19 21mm

613452C

534 14mm

651249C

1B-15mm

600148C

D19 22mm

613460C

534 15mm

651257C

1B-16mm

600156C

42-88M

012104

534 16mm

651265C

1B-17mm

600164C

1985

614335C

534 17mm

651273C

1B-18mm

600172C

1987

614343C

534 18mm

651516C

1B-19mm

600180C

1990/75mm

614378C

534 19mm

651281C

1B-20mm

600199C

1990/125mm

614386C

1B-21mm

600202C

1990/250mm

614394C

1B-22mm

600210C

1993 Z/94

614459C

D19 8mm

613304C

1995

614475C

D19 9mm

613312C

1997/375

614491C

D19 10mm

613320C

D19 HMZ

614610

D19 11mm

613339C

36/1

6327320

D19 12mm

613347C

62 / 200mm

636819

1282-C19-1BMZ-PL-6SD 679232

MERCHANDISERS

CONCEPT OPTION 2 2 STAND MERCHANDISERS

Code

No.

Opening order

Code

No.

Opening order

Code

No.

Opening order

1B-6mm

600040C

IN19 7mm

615331C

2150 3-150

6680280C

1B-7mm

600059C

IN19 8mm

615358C

2150 4-150

6680360C

1B-8mm

600067C

IN19 9mm

615366C

2150 6.5-200

6680870C

1B-9mm

600075C

IN19 10mm

615374C

2153 5.5

1482432C

1B-10mm

600083C

IN19 12mm

615382C

2161 PH2

1531204C

1B-11mm

600091C

IN19 14mm

615390C

225 / 250mm

645036

1B-12mm

600105C

IN19 17mm

615404C

225 / 300mm

645044

1B-13mm

600113C

IN19 19mm

615412C

534 10mm

651206C

1B-14mm

600121C

42-88M

6349051

534 11mm

651214C

1B-15mm

600148C

42KL-9M

6351978

534 12mm

651222C

1B-16mm

600156C

43TX-09

6360959

534 13mm

651230C

1B-17mm

600164C

1985

614335C

534 14mm

651249C

1B-18mm

600172C

1987

614343C

534 15mm

651257C

1B-19mm

600180C

1990/75mm

614378C

534 16mm

651265C

1B-20mm

600199C

1990/125mm

614386C

534 17mm

651273C

1B-21mm

600202C

1990/250mm

614394C

534 18mm

651516C

1B-22mm

600210C

1993 U-10T

614262C

534 19mm

651281C

1B-23mm

600229C

1993 Z/94

614459C

1261

660876

1B-24mm

600237C

1995

614475C

MV-150mm

6500720

1B/04M

601152

1997/375

614491C

106

8725200

1B/17M

601268

1997/450

614556C

113

8753680

1B/26M

601276

D19 HMZ

614610

116A

8757670

D19 8mm

613304C

D19 TMZ

614831

4550 / 20

7601610

D19 9mm

613312C

28 PU

622761

S8000

6701030

D19 10mm

613320C

36/1

6327320

8132-200JC

6719670

D19 11mm

613339C

38/400mm

633267C

8250-200JC

6707310

D19 12mm

613347C

62 / 150mm

636800

8316-200JC

6745080

D19 13mm

613355C

62 / 200mm

636819

S8003JC

6701110

D19 14mm

613363C

62 / 250mm

636827

8380-250TL

6752100

D19 15mm

613371C

62 / 300mm

636835

8531/250mm

675792

D19 16mm

613398C

62 / 375mm

636843

8531/300mm

675806

D19 17mm

613401C

62 / 450mm

636851C

D19 18mm

613428C

137/250mm

640670

D19 19mm

613436C

145 / 250mm

641200

D19 20mm

613444C

2150-2160 PH-06 ELS 1482320

D19 21mm

613452C

VDE 2160-2170 PH-06 1616048

D19 22mm

613460C

2150-6.5

6679510C

D19 23mm

613479C

2150-8.0

6679780C

D19 24mm

613487C

2160 PH1

6683380C

IN19 5mm

615315C

2160 PH2

6683460C

IN19 6mm

615323C

2160 PH3

6683540C

214

1282-C19-1BMZ-PL-6SD 679232

CONCEPT OPTION 3 3 STAND MERCHANDISERS

Code

No.

D19 HMZ

614610

D19 TMZ

614831

613452C

SR-D19Z-10

D19 22mm

613460C

D19 23mm

613479C

D19 24mm

613487C

600105C

D19 25mm

1B 13mm

600113C

1B 14mm

600121C

1B 15mm

600148C

1B 16mm

Code

No.

Opening order

Code

No.

1B 6mm

600040C

1B 7mm

600059C

1B 8mm

Opening order

D19 19mm

613436C

D19 20mm

613444C

600067C

D19 21mm

1B 9mm

600075C

1B 10mm

600083C

1B 11mm

600091C

1B 12mm

Opening order

Code

No.

534 15mm

651257C

534 16mm

651265C

616834

534 17mm

651273C

D32 EMZ

628026

534 18mm

651516C

KD 26R-6

621846

534 19mm

651281C

28 PU

622761

1261

660876

613495C

33 / 6S

96660

MV 150mm

6500720

D19 26mm

613509C

36 / 1

6327320

106

8725200

D19 27mm

613517C

38 / 400

633267C

113

8753680

D19 28mm

613525C

38 / 500

633283C

116A

8757670

600156C

D19 29mm

613533C

62 / 150mm

636800

4550-20

760161

1B 17mm

600164C

D19 30mm

613541C

62 / 200mm

636819

S 8000

6701030

1B 18mm

600172C

D19 32mm

613576C

62 / 250mm

636827

8132 - 200 JC

6719670

1B 19mm

600180C

IN19 5mm

615315C

62 / 300mm

636835

8250 - 200 JC

6707310

1B 20mm

600199C

IN19 6mm

615323C

62 / 375mm

636843C

8316 - 200 JC

6745080

1B 21mm

600202C

IN19 7mm

615331C

62 / 450mm

636851C

S 8003 JC

6701110

1B 22mm

600210C

IN19 8mm

615358C

137 / 175

6406620

8380 - 250 TL

6752100

1B 23mm

600229C

IN19 9mm

615366C

137 / 250

640670

8531 / 250

675792

1B 24mm

600237C

IN19 10mm

615374C

145 / 250

6412000

8531 / 300

675806

1B 25mm

600245C

IN19 12mm

615382C

2150-2160 PH-06 ELS 1482320

1282-C19-1BMZ-PL6SD T/ASS 679232

1B 26mm

600253C

IN19 14mm

615390C

VDE 2160-2170 PH-06 1616048 1

1282-C19-1BMZ-10SD T/ASS 679135

1B 27mm

600261C

IN19 17mm

615404C

2150-6.5

6679510C

1282-FM-C19-1BMZ-2PL T/ASS 679415 1

1B 28mm

600288C

IN19 19mm

615412C

2150-8.0

6679780C

1B 29mm

600296C

D19L 10mm

015705C

2160 PH1

6683380C

1B 30mm

600318C

D19L 12mm

015706C

2160 PH2

6683460C

1B 32mm

600326C

D19L 13mm

015701C

2160 PH3

6683540C

1B / 04M

601152

D19L 17mm

015703C

2150 3-150

6680280C

1B / 17M

601268

D19L 19mm

015704C

2150 4-150

6680360C

1B / 26M

601276

42 88M

6349051

2150 6.5-200

6680870C

D30 FMZ

623202

42KL-9M

6351978

2153 5.5

1482432C

D19 8mm

613304C

43TX-09

6360959

2161 PH2

1531204C

D19 9mm

613312C

1985

614335C

225/250

645036

D19 10mm

613320C

1987

614343C

225/300

645044

D19 11mm

613339C

1990 / 75

614378C

225/350

645052

D19 12mm

613347C

1990 / 125

614386C

225/450

645060

D19 13mm

613355C

1990 / 250

614394C

225/600

645079

D19 14mm

613363C

1993U-10T

614262C

534 10mm

651206C

D19 15mm

613371C

1993 Z/94

614459C

534 11mm

651214C

D19 16mm

613398C

1995

614475C

534 12mm

651222C

D19 17mm

613401C

1997 / 375

614491C

534 13mm

651230C

D19 18mm

613428C

1997 / 450

614556C

534 14mm

651249C

Opening order

215

TECHNOLOGY AND SAFETY

OUR TORQUE WRENCH SERVICE QUALIFIED AND CUSTOMISED Warranty In terms of GEDORE’S warranty policy, all torque wrenches are covered by a lifetime guarantee against defective materials and workmanship. Provided that the tool has been correctly used for its intended purpose and allowances have been made for the wear and tear of moving parts, the torque wrench will be repaired free of charge. The warranty does not cover torque wrenches which have been misused or which have experienced wear and tear through extensive use. A warranty return will be assessed by our technical staff and if the return falls outside of our warranty policy, the customer will be notified and quoted for the repair.

Calibration A standard calibration and the issue of a test certificate will be provided as standard practice on any repair conducted. A SANAS calibration and the issue of a SANAS calibration certificate will be done on request at an additional nominal charge.

Please note that the torque wrench is an item of measuring equipment.

Regular calibration, adjustment and certification. Why is this so important?

We recommend

› This us allows us to guarantee the precision and reliability of our torque tools in

› Calibration once a year (DIN EN ISO 6789:2003)

or after 5000 load cycles (DIN EN ISO 6789:2003)

Your advantage › Torque wrench offers measurement accuracy. › Free calibration service at GEDORE SA.

216

›

the long term. We attach a great deal of importance to this as your safety is of the utmost importance. We offer you the safety you require for everyday controlled tightening.

GEDORE - competent control at the highest level

WE TAKE YOUR HEALTH AND SAFETY SERIOUSLY. To ensure that you use our tools safely, please familiarise youself with the following information.*

Why should heavy tools be stored in the bottom drawer?

Tool trolley

› Always store the heaviest tools in the bottom (heavy duty) drawer. › When the bottom drawer is opened, the centre of gravity is relocated to a

› Read the operating instructions. › Open only one drawer at a time, when more than one drawer is open it increases the chance of the trolley

›

› Always keep the heaviest tools in the lower (heavy) drawer. Storage in the top drawers increases the chance of

› › ›

safe range. Storing heavy tools in the upper drawers relocates the centre of gravity upwards. When the drawer is opened, the centre of gravity is relocated to a critical range. This makes the tool trolley very susceptible to lateral forces. If the trolley is exposed to lateral forces such as impact, it can overturn. Always observe the load capacity for each drawer to ensure that you always stay in the safe range.

› S 1 = tool trolley centre of gravity when the drawer is closed › S 2 = tool trolley centre of gravity when the drawer is opened › Red = critical range danger of overturning

tipping over.

the trolley tipping over.

› Take note of the permissible load capacity of each drawer and the total carrying capacity of the trolley. › Never store pointed or sharp items loosely in the tool chest. Scribers can be made safe by pushing a cork on to the pointed ends.

› Only move the trolley when all the drawers are closed and locked. › When the trolley is stationary always set the safety brake on the swivel castors to avoid movement.

Tool chests › › ›

Spanners › › › › › › ›

General › › › › › › › › ›

Always wear safety goggles for tasks involving chips or the possibility of parts splintering. Only use the hand tools for their intended purpose. Never modify or tamper with tools. Exceptions: Professional regrinding of chisels, scrapers, cutting tools as well as hammer edges. Never work with damaged tools. Damaged tools must be replaced immediately. Handles must be free of oil and grease. Depending on the task, protect your hands by wearing work gloves. Work on live circuits may only be performed by qualified personnel using suitable VDE tools. Choose a safe surface to ensure stability. Wear safety shoes. Wear the specified ear protection when working in noisy environments.

› › › ›

Only use spanner sizes and profiles which fit the bolt or nut head. Do not use spanners as levers or as striking tools. Select the spanner in accordance with the screwed connection. This applies particularly to screwed connections with high torques. Never extend the tool lever arm except when the tools are designed especially for this purpose, e.g. single ended ring spanners. Never hit a spanner with a hammer except when the tools have an area designed especially for this purpose, e.g. slogging spanners. Always apply the spanner at a right angle to the bolt axis. Always pull the spanner towards you. Never push the spanner away from you. If for any reason you can only press the spanner away from you, use your open hand to prevent injuring your knuckles. Ring spanners transmit the forces more consistently. Ring spanners are therefore more suitable for large torques. Apply open ended spanners in such a way that the angle of the jaw is facing in the direction of rotation. If a torque is required for the screwed connection, use a torque wrench. Never work with damaged spanners or attempt to repair them, rather replace them.

Screwdrivers › › › › ›

* Furthermore, the relevant safety guidelines of various institutions apply, e.g. the guidelines of the trade associations, employers' instructions and the statutory specifications of the respective country.

Do not climb or step on to the tool chest. Never store pointed or sharp items loosely in the tool chest. Scribers can be made safe by pushing a cork on to the pointed ends. To avoid injury keep your back straight and lift from your knees when attempting to lift the tool chest.

› › › ›

Choose the screwdriver which is suitable for the respective bolt head profile. Place the workpiece on a ledge or clamp it. This helps to avoid injuries incurred by sliding blades. Avoid cuts by directing the requisite pressure for releasing or tightening the bolt head away from your body. Wear protective gloves when working with screwdrivers. If the screwdriver is too long, do not under any circumstances shorten the blade or handle. Choose a shorter screwdriver. Do not use the screwdriver as a caulking or crushing tool. Light hammer impact may only be applied for loosening screws using suitable screwdrivers with striking cap or continuous blade. If the bolt fails to loosen, use the GEDORE impact driver set No. K 1900-013 to release the bolt without destroying it. Insulated and tested screwdrivers must be used when working on electrical systems.

217

TECHNOLOGY AND SAFETY

VDE tools › › › › › › ›

Work on electrically live equipment may only be carried out by trained electricians. Only tools and safety equipment marked with the double triangle or bell 1000V symbol may be used. Before commencing any work, check the insulation for damage. Damaged tools must not be used. The regulations of the employers’ liability insurance associations and power supply companies must be complied with. GEDORE VDE tools are approved for work on live circuits at voltages up to 1000V AC and 1500V DC. Tools must not be combined unless they are designed to be securely joined together.

Pullers › ›

Read the operating instructions. Use only original spare parts and accessories for your GEDORE puller. Never use worn, modified or defective spare parts or accessories. Wear goggles and protective clothing when working. For added safety, use the GEDORE safety cover 5.10. Before pulling, ensure that the legs are in contact with the part to be pulled and are firmly tightened so that the spindle operates centrally along the axis of the puller. Attention! When using a puller, forces of up to several tons are generated. Take care to ensure that the puller is correctly positioned and is vertical to the component being pulled. Do not use electric or pneumatic power or percussion drivers.

› › › ›

Ratchets, tools and sockets › › › › › › › › ›

Ratchets are suitable for quick loosening and tightening. Avoid jerky movements with the ratchet, e.g. caused by hammer impact. The square drive and the tool and socket square drive must be of the same size. Select the drive size in accordance with the screwed connection. This applies particularly to screwed connections with high torques. Ensure that the ball engages properly in the ball catch. Always pull the spanner towards you. Never push the spanner away from you. If for any reason you can only press the spanner away from you, use your open hand to prevent injuring your knuckles. Only use suitable sockets and connections for the impact driver. Use a safety pin and ring to secure the connection between the socket, extension and machine. When using reducers, the smaller drive's torque always applies. Do not use ratchets as levers or as striking tools.

Pipe bending systems › Read the operating instructions. › Never use defective or worn pipe bending systems. › Replace defective or worn parts with original parts. › Use suitable systems and tools for bending. › Wear safety goggles, safety shoes and protective clothing. › Ensure stability of the pipe bending system during the bending process.

Safety notes for striking tools Chisels › Wear safety glasses and safety gloves. › Before starting work, check that the chisel blade is sharp and the striking end is burr-free. The blades must be properly wet-sharpened. › Select the appropriate type and size of chisel for the work to be carried out. › Hold the chisel with a firm grip. › When working, keep your eyes on the chisel tip. › Wherever possible, use a chisel with hand guard. › Never use chisels on workpieces harder than 40 HRC. › Set safety guards in place to prevent splinters and chips posing a hazard for other people. Centre punches, drifts and mortise chisels These tools are subject to the same safety rules as chisels.

›

218

Cutting tools › › › ›

Always set cutting tools down on a clearly visible place. Handles should always point towards you. Sharpen your cutting tools regularly. Blunt cutting tools represent a greater risk of injury than sharp ones. Blunt cutting tools require more force to be applied. Store cutting tools separately. This protects the blades and your fingers. Set shears down with their tips closed. This protects the blades and your fingers.

Torque tools › › › › › › › › › › › › ›

Read the operating instructions. Only use correctly calibrated torque wrenches. Treat torque wrenches as measuring equipment. Store torque wrenches carefully. Only use torque wrenches within the permissible torque range. Stop tightening the bolt immediately once you feel and hear the click signal. Apply the torque wrench at a right angle to the screwed connection. Only use original end fittings or accessories which fit the respective torque wrench. Where possible, do not use any reducers. Never loosen bolts using a torque wrench. Never use the torque wrench as a hammer. Slacken the torque wrench after completing work. Never use defective or worn accessory parts. Replace defective or worn parts with original parts. Only use one hand on the handle of the torque wrench; two-handed operation is only possible using DREMOMETER A - F.

Torque multipliers › Read the operating instructions. › Wear safety goggles, safety shoes and protective clothing. › Always inspect the torque multiplier for damage before use. › Never use electric, pneumatic or battery operated torque multipliers or impact wrenches. › Never exceed the specified maximum input torque. › Always use impact sockets in accordance with DIN 3129 or ISO 2725-2 and ISO 1174. › Always securely connect the reaction arm to the support bolt. › Never extend the impact socket or connector between bolt and torque multiplier. › Never use a universal or cardan joint. › Never hit the torque multiplier with a hammer. › Do not drop the torque multiplier. › Never use the torque multiplier if it has been dropped, used to strike other objects, › › › ›

or if anything has fallen on it. Always keep hands and fingers away from the reaction arm. Always select an anchor point (wall, another bolt) sufficient to withstand torque reaction forces. Reaction torque equals output torque. Never allow the gearbox to touch a wall or other object. Never modify the reaction arm without consulting with the manufacturer.

Work gloves › Read the operating instructions. › Ensure that your work gloves are suitable for the respective task to be performed. › Examine your work gloves for damage before use. Damaged work gloves must be › ›

replaced. Only work using work gloves which fit your hands perfectly. Store your work gloves in a clean and dry place.

Safety goggles › › › › › ›

Read the operating instructions. Ensure that your safety goggles are suitable for the respective task to be performed. Examine your safety goggles for damage before use. Damaged safety goggles must be replaced. Store safety goggles in dry areas. Use the black plastic bag provided for this purpose. This will help you to avoid scratches on the lenses. Clean the lenses regularly under running water, not when dry. Do not wear safety goggles on top of standard spectacles. Mechanical effects can be transferred which may be dangerous.

Hammers › › › › › › › › › › › › ›

Always wear safety glasses and safety gloves. Use the hammer only for its intended purpose. Never misuse the hammer as a lever. Before starting work, check that the hammer head is securely attached to the shaft. Select the appropriate size hammer for the work to be carried out. Never hit two hammers together. Never use steel hammers on workpieces harder than 46HRC. Use suitable plastic-faced hammers for this. If in doubt, rather use a suitable plastic-faced hammer. Avoid bouncing blows. Use only the work faces of the hammer. Blows with the side face damage the non-hardened hammer eye. This can loosen the grip of the shaft in the hammer head. If a burr forms on the pein or face of the hammer head, this must be immediately removed. Failure to do this can pose the risk of splintering when the hammer is in use. Grip the hammer shaft as far away from the hammer head as possible. This improves the impact effect and avoids vibrations. Do not store hammers with wooden shafts in warm, dry environments. Wood is a natural product. Dry, warm storage conditions can cause the shaft to lose moisture and shrink, so that the hammer shaft is no longer a tight fit in the hammer head. Do not store the wooden shaft in too damp conditions! Too much moisture causes the wooden shaft to swell up and damages the wooden fibres. This can result in the wooden shaft snapping behind the eye area.

Ear protection › › › › › ›

Pliers › › ›

Safety notes › › ›

For engines with ignition coils integrated in the spark plug connector (coil-on-plug), use only spark plug sockets with retainer springs. (No. 50 - 59). Do not use magnetic spark plug spanners on coil-on-plug spark plugs. This can result in control unit faults.

Read the operating instructions. Ensure that your ear protection is suitable for the respective task to be performed. Examine your ear protection for damage before use. Ear protection displaying damage must be replaced. Wear ear protection for the entire duration of your stay in noisy areas. Store your ear protection in a clean and dry place. Avoid impact against the earpieces. Otherwise, this can move the earpieces and lead to a noise level which is harmful for your ears.

› › › ›

Wear protective goggles when working with pliers. Ejected bits of wire and circlips not positioned correctly in the tip of the pliers pose a risk to your eyes. Check on the jaws for wear and tear. Worn jaws result in slipping and thus in accidents. The joint of the pliers should not to have any noticeable play. Exceptions are the sliding joints. When cutting wire, choose pliers that match the wire diameter and wire hardness. Never use pliers as hammers. Only insulated and tested pliers are to be used when working on electrical equipment. Grip wrenches are only for briefly fixing work pieces.

219

TECHNOLOGY AND SAFETY

TIGHTENING / TEST TORQUE Suggested bolt tightening torque in Nm (Newton metres)

Wrench/spanner test torques in accordance with DIN ISO 1711-1 (minimum guaranteed values) Nm

These torque levels are guideline values for metric standard threads in accordance with DIN ISO 261 and head sizes in accordance with DIN EN ISO 4762, DIN EN ISO 4032, DIN EN ISO 4014, and DIN 931-2, 6912, 7984 and 7990. These produce a 90% utilisation of the bolt yield strength. The calculations are based on a friction coefficient of 0.14 (new bolt) without any after treatment, (non-lubricated). Please note: in extreme cases, e.g. for bolts lubricated with MOS2 compound and with cadmium plated connecting elements on both sides, the tightening torque should be reduced by around 20 %.

No. 2, 2A, 2B No. 1B, 308, 7

No. 4

No. 6, No. 1B, 7, 400

No. 25

No. 26 R No. 626

No. 35 A No. 35 B No. 3112

No. 894 No. 895

Tightening values for quality grade as per DIN 267 5.6

6.9

8.8

10.9

12.9

0,123

0,162

0,314

0,373

0,520

0,628

1,90

M 2,2

0,196

0,265

0,510

0,598

0,843

1,010

4,5*

2,64

M 2,5

0,284

0,373

0,726

0,863

1,206

1,451

11,5

3,55

0,441

0,588

1,128

1,344

1,883

2,256

5,5

14,4

4,64

4.6

14,4

2,32

M 3,5

0,677

0,902

1,736

2,060

2,893

3,481

17,6

7,4

5,92

17,6

2,96

1,000

1,344

2,599

3,040

4,315

5,148

25,2

11,4

9,12

25,2

4,56

1,916

2,648

5,099

6,031

8,483

10,200

8 9*

34,5 45,4

16,6 23

13,3 18,4

34,5 45,4

3,432

4,511

8,728

10,300

14,710

17,652

34,5 45,4

6,65 9,20

58,1

24,8

58,1

12,4

11 12* 13 14* 15 16 17* 18 19* 20* 21 22* 23* 24 25* 26* 27 28*

72,7 89,1 107 128 150 175 201 230 261 294 330 368 408 451 496 544 594 647

40,4 51,5 64,5 79,4 96,2 115 134 160 186 215 247 281 319 359 402 449 499 552

32,3 41,2 51,6 63,5 77,0 92,3 107 128 149 172 198 225 255 287 322 359 399 442

72,7 89,1 107 128 150 175 201 230 261 294 330 368 408 451 496 544 594 647

16,1 20,6 25,8 31,7 38,5 46,1 53,5 64,0 74,5 86,0 99,0 112 127 143 161 179 199 221

5,590

7,453

14,220

17,162

24,517

28,439

8,238

10,787

21,575

25,497

35,304

42,168

M 10

16,67

21,575

42,168

50,014

70,608

85,317

M 12

28,44

38,246

73,550

87,279

122,60

147,10

M 14

45,11

60,801

116,70

138,30

194,20

235,40

M 16

69,63

93,163

178,5

210,80

299,10

357,90

M 18

95,12

127,50

245,20

289,3

411,90

490,30

M 20

135,3

180,45

384,10

411,90

578,60

696,30

760

670

536

760

268

941,40

32* 34

884 1019

804 951

643 761

884 1019

321 381

M 22

182,4

245,16

470,70

559,00

784,50

M 24

230,5

308,91

598,20

711,00

1000

1196

1165

1117

894

1165

447

M 27

343,2

460,90

887,50

1049

1481

1775

1579

1442

1154

1579

577

M 30

465,8

622,72

1206

1422

2010

2403

2067

1816

1453

2067

726

M 33

632,5

848,30

1628

1932

2716

3266

2512

2145

1716

2512

858

M 36

814,0

1089

2099

2481

3491

4197

3140

2077

3140

M 39

1059

1412

2716

3226

4531

5443

3849

2471

3849

3140

1038

3849

1235

M 42

1304

1746

3364

3991

5609

6727

4021

2900

4021

1422

M 45

1638

2177

4207

4992

7012

8414

4658

3364

4658

1618

M 48

1981

2638

5080

6021

8473

10150

5394

3862

5394

1765

M 52

2540

3393

6541

7747

10885

13092

6178

4394

6178

1912

M 56

3168

4227

8149

9650

13582

16279

6963

2059

M 60

3932

5247

10101

11964

16867

20202

7845

M 64

4737

6306

12160

14416

20300

24320

8336

* These sizes are not included in DIN ISO 272 Note: In reference to the spanner test torque as per DIN ISO 1711-1 column, we explicitly point out that these are minimum guarantee values. Bolts from M39 in quality grades 4.6, 5.6, 6.9, 8.8, 10.9 and 12.9 are not standardised.

220

TIGHTENING / TEST TORQUE Wrench/spanner test torques in accordance with DIN ISO 1711-1 (minimum guaranteed values) Nm With internal square as per DIN 3120

Test torques for tightening tools for hexagon socket head screws

12,5

No. 20 No. D 20

No. 30 No. D 30

No. 19 No. D 19

No. 32 No. D 32

No. D 21

1/4“

3/8“

1/2“

DIN EN ISO 4762

No. 42T, DT42 No. 42, 42EL

With hexagon head as per DIN 7422

No. IN 34 6,3

12,5

No. IN 20

No. IN30

No. IN 19

No. IN 32

No. IN 21

3/8“

1/2“

3/4“

1“

6,3

3/4“

1“

1/4“

10,4

1,5

0,82

M 2,2

4,5*

12,6

1,9

M 2,5

15,1

5,5

17,8

2,5

3,8

M 3,5

20,6

23,2

26,8

33,2

8 9*

33,6 41,1

45,5 59,9

49,1

11 12* 13 14* 15 16 17* 18 19* 20* 21 22* 23* 24 25* 26* 27 28*

57,8 67,0 68,6 68,6

M6 M7 M8 M 10 M 12 M 14 M 16 M 18

6,6

94,1 119,2

76,7

147

96 118 141 169 198 225 225 225 225 225 225 225

178 212 249 288 331 377 425 477 531 569 569 569 569 569 569 569 569 569

6 7 8

52 80 120

120

52 78 120

9 10

165 220

220

165 220

370

590

980

1000

1360

1400

2110

2100

569 569 569 583 624 665 707

M 20

569

795

M 22

32* 34

569 569

888 984

M 24

1084

1677

M 27

1353

1910

M 30

1569

2143

M 33

1569

2329

2750

M 36

1569

2562

3910

M 39

1569

2795

4000

M 42

2795

M 45

2795

M 48

2795

M 52

2795

M 56

M 60

M 64

2700

The matching test torques are derived from the theoretical load capability of the connecting square drive. Note: Hand tightening sockets are unsuited to use with impact drivers. Inappropriate use poses an accident risk.

221

TECHNOLOGY AND SAFETY

HEAD WIDTHS AND THREAD DIAMETERS Nominal size DIN ISO 272 normal (large)

222

Thread diameter Ø Metric as per DIN ISO 272

Nominal size

Metric for hightensile bolted structural joints as per EN 14399-4

Thread diameter Ø

Nominal size Inch

BS 916, 1083

Nominal size Inch

8 BA 7 BA 6 BA

0,152 0,172 0,193

3,86 4,37 4,90

3,2 (–) 4 (–)

1,6 2

5 (–) 5,5 (–)

2,5 3

5/32

0,1562

3,97

3/16

0,1875

4,76

7 (–) 8 (–)

4 5

7/32 1/4

0,2187 0,2500

5,56 6,35

5 BA 4 BA 1/16 W

0,220 0,248 0,256

5,59 6,30 6,90

10 (–) 11 (–)

6 7

9/32

0,2812

7,14

5/16

0,3125

7,94

3 BA 3/32 W 2 BA

0,282 0,297 0,324

7,16 7,54 8,23

13 (–) 16 (–)

8 10

11/32 3/8 13/32

0,3438 0,3750 0,4062

8,73 9,52 10,32

1/8 W 1 BA 0 BA

(7/32)

0,340 0,365 0,413

8,64 9,27 10,49

18 (21) 21 (24) 22

12 14

7/16

0,4375

11,11

3/16 W

1/4

0,445

11,30

1/2

0,5000

12,70

1/4 W

5/16

0,525

13,34

24 (27) 27 (30)

16 18

9/16 19/32 5/8

0,5625 0,5938 0,6250

14,29 15,08 15,88

5/16 W

3/8

0,600

15,24

30 (34) 32 34 (36)

11/16

0,6875

17,46

3/4

0,7500

19,05

3/8 W

7/16

0,710

18,03

36 (41) 41 (46)

24 27

22 24

25/32 13/16 7/8

0,7812 0,8125 0,8750

19,84 20,64 22,22

7/16 W

1/2

0,820

20,83

46 (50) 50 (55)

30 33

27 30

15/16 1.

0,9375 1,0000

23,81 25,40

1/2 W

9/16

0,920

23,37

55 (60) 60 (65)

36 39

1.1/16

1,0625

26,99

9/16 W

5/8

1,010

25,65

5/8 W

(11/16)

1,100

27,94

65 70

42 45

1.1/8 1.3/16 1.1/4

1,1250 1,1875 1,2500

28,58 30,16 31,75

11/16 W

3/4

1,200

30,48

75 80

48 52

1.5/16 1.3/8 1.7/16

1,3125 1,3750 1,4375

33,34 34,92 36,51

3/4 W 13/16 W

7/8 (15/16)

1,300 1,390

33,02 35,31

85 90

56 60

1.1/2 1.5/8 1.11/16

1,5000 1,6250 1,6875

38,10 41,28 42,86

7/8 W

1,480

37,59

1. W

1.1/8

1,670

42,42

95 100

64 68

1.3/4 1.13/16 1.7/8

1,7500 1,8125 1,8750

44,45 46,04 47,62

1.1/8 W

1.1/4

1,860

47,24

105 110

72 76

2. 2.1/16 2.3/16

2,0000 2,0625 2,1875

50,80 52,39 55,56

1.1/4 W

1.3/8

2,050

52,07

115 120

80 85

2.1/4 2.3/8 2.7/16

2,2500 2,3750 2,4375

57,15 60,32 61,91

1.3/8 W

1.1/2

2,220

56,39

1.1/2 W

1.5/8

2,410

61,21

130

2.9/16 2.5/8 2.3/4

2,5625 2,3750 2,7500

65,09 66,68 69,85

1.5/8 W

1.3/4

2,580

65,53

1.3/4 W

2,760

70,10

135

2.13/16 2.15/16 3

2,8125 2,9375 3,0000

71,44 74,61 76,20

145

100

3.1/8 3.3/8 3.1/2

3,1250 3,3750 3,5000

79,38 85,72 88,90

2.1/4

3,150

80,01

2.1/2

3,550

90,17

2.3/4

3,890

98,81

4,180

106,17

3.1/4

4,530

115,06

3.1/2

4,850

123,19

3.3/4

5,180

131,57

5,550

140,97

4.1/2

6,380

162,05

150

105

3.3/4 3.7/8

3,7500 3,8750

95,25 98,42

155

110

4.1/8 4.1/4 4.1/2

4,1250 4,2500 4,5000

104,78 107,95 114,30

165

115

4.5/8 4.7/8 5.

4,6250 4,8750 5,0000

117,48 123,82 127,00

170

120

5.1/4 5.3/8 5.5/8

5,2500 5,3750 5,6250

133,35 136,52 142,88

5.3/4 6. 6.1/8

5,7500 6,0000 6,1250

146,05 152,40 155,58

180

125

185

130

200 210

140 150

(3/16)

(1.7/8W)

76,70

SPANNER SIZES TOLERANCE FOR BOLTS AND SOCKET WRENCHES Nominal size/s in mm

Tolerance class 1 as per ISO 691 dimensions

Tolerance class 2a as per ISO 691 dimensions

Conversion tables Inch to decimal-inches and mm

! in. 0 1/64 1/32 3/64

dec.in. 0 0.015625 0.03125 0.046875

mm. 0 0,3969 0,7938 1,1906

in. 1/2 33/64 17/32 35/64

dec.in. 0.5 0.515625 0.53125 0.546875

mm. 12,7000 13,0969 13,4938 13,8906

1/16 5/64 3/32 7/64

0.0625 0.078125 0.09375 0.109375

1,5875 1,9844 2,3812 2,7781

9/16 37/64 19/32 39/64

0.5625 0.578125 0.59375 0.609375

14,2875 14,6844 15,0812 15,4781

1/8 9/64 5/32 11/64

0.125 0.140625 0.15625 0.171875

3,1750 3,5719 3,9688 4,3656

5/8 41/64 21/32 43/64

0.625 0.640625 0.65625 0.671875

15,8750 16,2719 16,6688 17,0656

3/16 13/64 7/32 15/64

0.1875 0.203125 0.21875 0.234375

4,7625 5,1594 5,5562 5,9531

11/16 45/64 23/32 47/64

0.6875 0.703125 0.71875 0.734375

17,4625 17,8594 18,2562 18,6531

This tolerance class applies only to ring spanners or socket wrenches that have not been manufactured by material removal.

1/4 17/64 9/32 19/62

0.25 0.265625 0.28125 0.296875

6,3500 6,7469 7,1438 7,5406

3/4 49/64 25/32 51/62

0,75 0,765625 0,78125 0,796875

19,0500 19,4469 19,8438 20,2406

Spanner sizes in accordance with this international standard must be marked with: a) Spanner head size. b) Reference to the international standard, i.e. ISO 691. c) Nominal sizes in millimetres. d) Tolerance class 1 or 2.

5/16 21/64 11/32 23/64

0.3125 0.328125 0.34375 0.359375

7,9375 8,3344 8,7312 9,1281

13/16 53/64 27/32 55/64

0,8125 0,828125 0,84375 0,859375

20,6375 21,0344 21,4312 21,8281

3/8 25/64 13/32 27/64

0.375 0.390625 0.40625 0.421875

9,5250 9,9219 10,3188 10,7156

7/8 57/64 29/32 59/64

0,875 0,890625 0,90625 0,921875

22,2250 22,6219 23,0188 23,4156

7/16 29/64 15/32 31/64

0.4375 0.453125 0.46875 0.484375

11,1125 11,5094 11,9062 12,3031

15/16 61/64 31/32 63/64 1

0,9375 0,953125 0,96875 0,984375 1

23,8125 24,2094 24,6062 25,0031 25,4000

min.

max.

min.

max.

2 ≤s < 3 3 ≤s < 4 4 ≤s < 6

+ 0,02 + 0,02 + 0,02

+ 0,08 + 0,10 + 0,12

+ 0,02 + 0,02 + 0,02

+ 0,12 + 0,14 + 0,16

3 ≤s < 10 10 ≤s < 12 12 ≤s < 14

+ 0,03 + 0,04 + 0,04

+ 0,15 + 0,19 + 0,24

+ 0,03 + 0,04 + 0,04

+ 0,19 + 0,24 + 0,30

14 ≤s < 17 17 ≤s < 19 19 ≤s < 26

+ 0,05 + 0,05 + 0,06

+ 0,27 + 0,30 + 0,36

+ 0,05 + 0,05 + 0,06

+ 0,35 + 0,40 + 0,46

26 ≤s < 33 33 ≤s < 55 55 ≤s < 75

+ 0,08 + 0,10 + 0,12

+ 0,48 + 0,60 + 0,72

+ 0,08 + 0,10 + 0,12

+ 0,58 + 0,70 + 0,92

75 ≤s < 105 105 ≤s < 150 150 ≤s < 210

+ 0,15 + 0,20 + 0,25

+ 0,85 + 1,00 + 1,22

+ 0,15 + 0,20 -

+ 1,15 + 1,40 -

223

TECHNOLOGY AND SAFETY

TORQUE CONVERSION TABLES Corresponding unit

Torque conversion factors

Required Units

= mNm

= cNm

= Nm

= ozf·in

= lbf·in

= lbf·ft

= gf·cm

= f·cm (kp·cm)

= kgf·m (kp·m)

Application

1 mN·m

0,1

0,001

0,142

0,009

0,0007

10,2

0,01

0,0001

1 cN·m

0,01

1,416

0,088

0,007

102

0,102

0,001

Conversion formula: Units to be converted x factor = corresponding unit

1 N·m

1000

100

141,6

8,851

0,738

10197

10,2

0,102

1 ozf·in

7,062

0,706

0,007

0,0625

0,005

0,072

0,0007

1 lbf·in

113

11,3

0,113

0,083

1152,1

1,152

0,0115

1 lbf·ft

1356

135,6

1,356

192

13826

13,83

0,138

1 gf·cm

0,098

0,01

0,0001

0,014

0,0009

0,00007

0,001

0,00001

98,07

9,807

0,098

13,89

0,868

0,072

1000

0,01

9807

980,7

9,807

1389

86,8

7,233

100000

100

1 kgf·cm (kp·cm) 1 kgf·m (kp·m)

Example: Conversion of 5lbf·ft in cNm Solution: 5 x 135.6 = 678cNm

Conversion from m in kgf·m (kp·m) N·m 0 1 2 3

kgf·m(kp·m)0

Conversion from kgf·m (kp·m) in Nm 1 2 3

0,41

0,51

0,61

0,71

0,82

0,92

39,23

49,03

58,84

68,65

78,45

88,26

0,00

0,10

0,20

0,31

1N·m = 0,102 kgf·m

0,00

9,81

19,61

29,42

1 kgf·m (kp·m) = 9,807 N·m

1,02

1,12

1,22

1,33

1,43

1,53

1,63

1,73

1,84

1,94

98,07

107,87

117,68

127,49

137,29

147,10

156,91

166,71

176,52

186,33

2,04

2,14

2,24

2,35

2,45

2,55

2,65

2,75

2,86

2,96

196,13

205,94

215,75

225,55

235,36

245,17

254,97

264,78

274,59

284,39

3,06

3,16

3,26

3,37

3,47

3,57

3,67

3,77

3,87

3,98

294,20 304,01 313,81

323,62

333,43

343,23 w353,04 362,85 372,65

382,46

4,08

4,18

4,28

4,38

4,49

4,59

4,69

4,79

4,89

5,00

392,27

402,07 411,88

421,69

431,49

441,30

480,53

500,14

519,75

529,56

539,37

549,17

558,98

568,79 578,59

608,01 617,82

627,63

637,43

647,24

657,05

666,85 676,66

5,10

5,20

5,30

5,40

5,51

5,61

5,71

5,81

5,91

6,02

490,33

6,12

6,22

6,32

6,42

6,53

6,63

6,73

6,83

6,93

7,04

588,40 598,21

509,95

451,11

460,91 470,72

7,14

7,24

7,34

7,44

7,55

7,65

7,75

7,85

7,95

8,06

686,47 696,27 706,08 715,89

725,69 735,50

745,31

755,11

764,92

8,16

8,26

8,36

8,46

8,57

8,67

8,77

8,87

8,97

9,08

784,53 794,34 804,15

813,95

823,76

833,57

843,37

853,18

862,99 872,79

902,21 912,02

921,83

931,63

941,44

951,25

961,05

774,73

9,18

9,28

9,38

9,48

9,59

9,69

9,79

9,89

9,99

10,10

882,60 892,41

100

10,20

10,30

10,40

10,50

10,60

10,71

10,81

10,91

11,01

11,11

100

980,67 990,47 1000,28 1010,08 1019,89 1029,70 1039,50 1049,31 1059,12 1068,92

Conversion from N·m in Ibf·ft N·m 0 1 2

Conversion from Ibf·ft in N·m Ibf·ft 0 1 2

2,21

2,95

3,69

4,43

5,16

5,90

6,64

4,07

5,42

6,78

8,13

9,49

10,85

12,20

0,00

0,74

1,48

1N·m=0,7376 lbf·ft

0,00

1,36

2,71

970,86

1 lbf·ft = 1,356 N·m

7,38

8,11

8,85

9,59

10,33

11,06

11,80

12,54

13,28

14,01

13,56

14,91

16,27

17,63

18,98

20,34

21,69

23,05

24,40

25,76

14,75

15,49

16,23

16,96

17,70

18,44

19,18

19,91

20,65

21,39

27,12

28,47

29,83

31,18

32,54

33,90

35,25

36,61

37,96

39,32

22,13

22,86

23,60

24,34

25,08

25,81

26,55

27,29

28,03

28,76

40,67

42,03

43,39

44,74

46,10

47,45

48,81

50,16

51,52

52,88

29,50

30,24

30,98

31,72

32,45

33,19

33,93

34,67

35,40

36,14

54,23

55,59

56,94

58,30

59,66

61,01

62,37

63,72

65,08

66,43

36,88

37,62

38,35

39,09

39,83

40,57

41,30

42,04

42,87

43,52

67,79

69,15

70,50

71,86

73,21

74,57

75,93

77,28

78,64

79,99

44,25

44,99

45,73

46,47

47,20

47,94

48,68

49,42

50,15

50,89

81,35

82,70

84,06

85,42

86,77

88,13

89,48

90,84

92,20

93,55

96,26

51,63

52,37

53,10

53,84

54,58

55,32

56,05

56,79

57,53

58,27

94,91

59,00

59,74

60,48

61,22

61,96

62,69

63,43

64,17

64,91

65,64

108,46 109,82

97,62

98,97

100,33

101,69

103,04

104,40 105,75

107,11

111.18

112,53

113,89

115,24

116,60

117,96

120,67

119,31

66,38

67,12

67,86

68,59

69,33

70,07

70,81

71,54

72,28

73,02

122,02

123,38

124,73

126,09

127,45

128,80 130,16

131,51

132,87

134,23

100

73,76

74,49

75,23

75,97

76,71

77,44

78,18

78,92

79,66

80,39

100

135,58

136,94

138,29

139,65

141,00

142,36

143,72

145,07

146,43

147,78

Conversion from Nm in Ibf·in N·m 0 1 2

Conversion from Ibf·in in Nm Ibf·in 0 1 2

26,55

35,40

44,25

53,10

61,96

70,81

79,66

0,34

0,45

0,56

0,68

0,79

0,90

1,02

0,00

8,85

17,70

1 N·m = 8,851 lbf·in

0,00

0,11

0,23

1 lbf·in = 0,113 N·m

88,51

97,36

106,21

115,06

123,91

132,76

141,61

150,46

159,31

168,16

1,13

1,24

1,36

1,47

1,58

1,69

1,81

1,92

2,03

2,15

177,02

185,87

194,72

203,57

212,42

221,27

230,12

238,97

247,82

256,67

2,26

2,37

2,49

2,60

2,71

2,82

2,94

3,05

3,16

3,28

283,22 292,08 300,93

309,78

318,63

327,48

336,33

345,18

3,39

3,50

3,62

3,73

3,84

3,95

4,07

4,18

4,29

4,41

398,28 407,14

415,99

424,84

433,69

4,52

4,63

4,75

4,86

4,97

5,08

5,20

5,31

5,42

5,54

265,52

274,37

354,03

362,88 371,73

380,58 389,43

442,54 451,39

460,24 469,09 477,94

531,05

539,90

548,75 557,60

619,55

628,40 637,26

708,06 716,91

725,76

486,79 495,64 504,49 513,34

566.45 575,30

593,00

601,85

522,20

5,65

5,76

5,87

5,99

6,10

6,21

6,33

6,44

6,55

6,67

610,70

6,78

6,89

7,00

7,12

7,23

7,34

7,46

7,57

7,68

7,80

646,11

654,96 663,81 672,66 681,51

690,36 699,21

7,91

8,02

8,13

8,25

8,36

8,47

8,59

8,70

8,81

8,93

734,61

743,46

752,32

778,87 787,72

9,04

9,15

9,26

9,38

9,49

9,60

9,72

9,83

9,94

10,06

840,82 849,67

796,57 805,42

814,27

823,12

831,97

100

885,08 893,93

902,78

911,63

920,48 929,33

224

584,15 761,17 938,18

770,02

858,52 867,38 947,03

876,23

955,88 964,73

10,17

10,28

10,39

10,51

10,62

10,73

10,58

10,96

11,07

11,19

100

11,30

11,41

11,52

11,64

11,75

11,86

11,98

12,09

12,20

12,31

Comparison table of Vickers-Brinell-Rockwell hardness and tensile strength

Important prefix characters

Giga Mega Kilo Hecto Deca Deci Centi Milli Micro Nano

G M k H Da d c m µ n

1.000.000.000 1.000.000 1.000 100 10 0,1 0,01 0,001 0,000001 0,000000001

= 10 9 = 10 6 = 103 = 102 = 101 = 10 -1 = 10 -2 = 10 -3 = 10 -6 = 10 -9

Important SI units with conversions to old but still commonly used units

Length Masa Time Force Torque Energy (work) Heat quantity Power Pressure Electrical current Temperature

metre kilogramme second newton newton metre joule joule watt pascal ampere kelvin

Conversion table, mass and weight 1 megagramme (Mg) = 1.000 kg 1 ton (to.) = 1.000 kg

1 kilogramme 1 hectogramme 1 decagramme 1 gramme 1 decigramme 1 centigramme 1 miligramme

(kg) (hg) (dag) = 10 dg (g) (dg) (cg) (mg)

m s N Nm J J W Pa A K

= m/s 2

1 N = 0,102 kp 9,81 N·m = 1 kp·m

= Nm = Nm/s = N/m 2

1 J = 0,239 cal 1 kW = 1,36 PS = 860 kcal/h 100 000 Pa = 1 bar = 10 mWS 1 K = 1 °C

= 10.000 hg

= 100.000 dag

= 1.000.000 g

= 10 hg

= 100 dag = 10 dag

= 1000 g = 100 g = 10 g

= 100 cg = 10 cg

= 1000 mg = 100 mg = 10 mg = 1 mg

Conversion table, force and torque

1 newton 1 kilopond 1 kilopond metre

= 0,102 kp = 9,81 N = 9,81 Nm

Material properties

Aluminium Lead Iron (Steel) Gold Copper Zinc Glass Air Wood

Density g/cm 3 2,7 11,3 7,86 19,3 8,9 7,1 2,2–2,9 0,0013 0,5–0,7

Plastics / synthetic materials: 1,05 PS, 0,9 PP, 1,05 ABS

Expansion 1/°C 0,000024 0,000029 0,000012 0,000014 0,000017 0,000026 0,000008 0,0036

Melting point °C 660,1 327,3 1540 1063 1083 419 800–1500

Modulus of elasticity N/mm 72 000 16 000 210 000 79 000 126 000 94 000 68 000 10 000

0,00008 0,00018 0,00010

3 400 1 200 2 500

Examples Example 1: Expansion of a steel body of 100mm in length at a temperature of 10°C. Lengthy expansion coefficient x °C exp. = 100mm x 0,000012 x 10 = 0,012mm = 12µm Example 2: Elastic expansion e = s/E. A body of 100mm in length made of ABS is stretched with s = 50N/mm2. e = 50N/mm2: 2500N/mm2 = 0.02. The expansion is: 10 mm x 0.02 = 2mm. Example 3: Two steel plates with a total thickness of 20mm are pre-stressed by means of a screw connection of s = 50N/mm2: e = 50: 210000 = 0.00024. The compression in the surrounding area of the screw is 2 mm x 0.00024 = 0,0048mm = 5µm. The elastic compression induces a continuous pre-tension of the screw connection. A properly tensed screw connection is selfinhibiting.

Vickers hardness Brinell hardness HV 30

HB 30

Rockwell hardness Rockwell hardness Tensile strength HRB

HRC

80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 640 650 660 670 680 690 700 720 740 760 780 800 820 840 860 880 900 920 940

80,7 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 310 320 330 340 350 359 368 376 385 392 400 408 415 423 430 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

36,4 42,4 47,4 52,0 56,4 60,0 63,4 66,4 69,4 72,0 74,4 76,4 78,4 80,4 82,2 83,8 85,4 86,8 88,2 89,6 90,8 91,8 91,5 94,0 95,0 95,8 96,6 97,4 98,2 99,0 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 19,2 20,2 21,2 22,1 23,0 23,8 24,6 25,4 26,9 27,1 27,6 28,3 29,0 29,6 30,3 31,5 32,7 33,8 34,9 36,0 37,0 38,0 38,9 39,8 40,7 41,5 42,4 43,2 44,0 44,8 45,6 46,3 47,0 47,7 48,3 49,1 49,7 50,4 51,0 51,6 52,2 52,8 53,3 53,9 54,4 55,0 55,5 56,0 56,5 57,0 57,5 58,0 58,5 59,0 59,5 60,4 61,2 62,0 62,8 63,6 64,3 65,0 65,7 66,3 66,9 67,5 68,0

sB N/mm2

270 290 310 320 340 360 380 390 410 420 440 460 470 490 500 520 540 550 570 590 600 620 640 660 670 680 710 720 730 750 760 780 800 820 830 850 870 880 900 920 940 950 970 990 1010 1040 1080 1110 1140 1170 1200 1230 1260 1290 1320 1350 1380 1410 1430 1460 (1490) (1520) (1550) (1580) (1600) (1630) (1660) (1690) (1710) (1740) (1770) (1790) (1820) (1850) (1870) (1900) (1930) (1950) (1980) (2000) (2030) (2050) (2080) (2110) (2130) (2170) (2220) (2260) (2300) – – – – – – – –

225

TECHNOLOGY AND SAFETY ARTICLE INDEX

ARTICLE INDEX Article No.

ARTICLE INDEX Page

Article No.

Page

1.07/K ........................... Puller Set ....................................................................................185

1404.............................. Tool Cabinet ...............................................................................116

1.15 ............................... Triple Grip Puller.......................................................................182

1410.............................. Artisan’s Tool Chest..................................................................119

1.26 .............................. Nut Splitter - Hydraulic ..........................................................183

142 ................................ Universal Pliers............................................................................87

1.30 ............................... Internal Extractor .....................................................................183

1425/3/5 ..................... Foam Inserts Spares ................................................................123

1.31 ............................... Internal Extractor Set ..............................................................185

1425/27/HM .............. Modular Assortment...............................................................123

1.36 ............................... Support Brace ...........................................................................184

1425/27/PL................. Modular Assortment...............................................................123

1.38 ............................... Separator Puller ........................................................................184

1425/27/SD ............... Modular Assortment...............................................................123

1.40 ............................... Bearing Separator ....................................................................184

1425/27/SP ................ Modular Assortment...............................................................123

1.67 ............................... Steering Wheel Puller .............................................................184

1425/3.......................... Tool Chest ...................................................................................118

1.73 ............................... Ball Joint Puller .........................................................................184

1425/3.......................... Workshop Tool Assortment ..................................................118

1.75 ............................... Oil Filter Hook..............................................................................93

1425/41/D19 ............. Modular Tool Assortment .....................................................122

1.85 ............................... Bearing Installation Set..........................................................185

1425/41/IB ................. Modular Tool Assortment .....................................................122

100 ................................ Centre Punch .............................................................................130

1425/5.......................... Comprehensive Tool Assortment.......................................119

106 ................................ Chisel & Punch Set ...................................................................131

1425/5.......................... Tool Chest ...................................................................................119

108 ................................ UNI Hand Guard .......................................................................130

143 ................................ Universal Pliers............................................................................87

1001.............................. Electricians VDE Toolset .........................................................140

145 ................................ Waterpump Pliers ......................................................................87

1100-1.04 ................... Universal Puller Set .................................................................185

1450S ........................... Tool Panel & Accessories .......................................................117

1101-001 ..................... Circlip Pliers Set ..........................................................................84

1460.............................. Tool Trunk ..................................................................................106

1101-1.29/3K ............. Ball Bearing Extractor Set......................................................185

1500.............................. Metal Work Bench....................................................................116

1102-003 ..................... Pliers Set ........................................................................................84

1500.............................. Wooden Work Bench ..............................................................116

113 ................................ Drift Punch Set ..........................................................................131

1502 ............................. Drawer Unit ................................................................................117

116 ................................ Pin Punch Set.............................................................................131

1510 ............................. Classic Tool Assortment .........................................................120

121 G ............................ Suction-Cup Lifter ....................................................................94

1510 ............................. Tool Trolley .................................................................................120

121 G-3 ........................ Suction-Cup Lifter ....................................................................94

1525 ............................. Comprehensive ........................................................................121

125 ................................ Piston Ring Clamp Band ..........................................................95

1525 ............................. Tool Trolley .................................................................................121

126 ................................ Piston Ring Pliers........................................................................95

1581 ............................. Tool Trolley .................................................................................122

126-060 ....................... Piston Ring Pliers........................................................................95

1581.............................. Classic Tool Assortment ........................................................122

1260 ............................. Toolbox - 3 Compartments ..................................................104

165-171-06 ................. Electronic Screwdriver Set ......................................................66

1261 ............................. Toolbox - 5 Compartments ..................................................104

165-TX-06 ................... Electronic Screwdriver Set ......................................................66

128 ............................... Valve Spring Tensioner.............................................................95

180 ................................ Cable Shears - Insulated ........................................................140

1281.............................. Toolbox - 5 Compartments - Aluminium.........................105

19................................... Boxes & Inserts ............................................................................46

1281/1282 ................. Tool Assortments ............................................................107-116

32................................... Repair Kits .....................................................................................46

1282/5.......................... Toolbox - 5 Compartments ..................................................104

1930.............................. Reducer 1/2” to 3/8” ..................................................................40

132 ................................ Hose Clamp Pliers .....................................................................96

1932.............................. Converter 1/2” to 3/4”...............................................................40

132 CLIC ...................... Hose Clamp Pliers ......................................................................96

1985.............................. Speed Brace Handle 1/2”.........................................................40

133 ................................ Open Ended Slogging Spanner ...........................................16

1987.............................. Sliding T-Bar 1/2” ........................................................................41

1335 ............................. Toolbox - 5 Compartments ..................................................105

1990 ............................. Extension Bar 1/2”......................................................................41

134 ............................... Straight Jaw Grip Wrench .......................................................85

1990M ......................... Extension with Magnet 1/2”...................................................41

135 ................................ Brake Spring Pliers .....................................................................96

1993 U-3...................... Reversible Ratchet 1/2”............................................................35

137 ................................ Grip Wrenches .............................................................................85

1993 U-10K ................ Reversible Plastic Ratchet 1/2” .............................................35

138 ................................ Welding Grip Pliers ....................................................................85

1993 U-10T................. Reversible Ratchet 1/2”............................................................35

138 Y............................. C-Grip Pliers .................................................................................85

1993 Z-94 ................... Reversible Ratchet & Coupler 1/2”.......................................35

139 ................................ Pry Bars ..........................................................................................93

1994 ............................. Square Coupler 1/2”..................................................................41

1401.............................. PRO Cabinet & Tools................................................................114

1995 ............................. Universal Joint 1/2”....................................................................41

1401.............................. Tool Cabinet ...............................................................................114

1996 ............................. Power Bar 1/2”.............................................................................40

1401L ........................... Large Tool Cabinet...................................................................115

1997.............................. Power Bar 1/2”.............................................................................40

1401L ........................... PRO Cabinet & Tools................................................................115

19L ................................ Extra Deep Socket (MM) (AF) .................................................37

1404.............................. PRO Cabinet & Tools................................................................116

1B .................................. Spanner Sets ...................................................................................7

226

ARTICLE INDEX

ARTICLE INDEX Article No.

ARTICLE INDEX Page

Article No.

Page

1B .................................. Spanners (AF) .................................................................................7

26 R ............................... Double Ended Box Spanners .................................................92

1B .................................. Spanners (MM) ...............................................................................6

26 RS............................. Stepped Tommy Bar..................................................................92

2 ..................................... Ring Spanner Sets......................................................................11

248ST ........................... Recoil-free Hammer ................................................................130

2 ..................................... Ring Spanners (MM) (AF).........................................................10

27................................... Wheel Socket Wrench - Trucks ..............................................92

20................................... Socket (MM) 1/4”........................................................................22

28 PU ............................ 4-Way Wheel Wrench................................................................92

20L ................................ Socket Long Pattern 1/4”.........................................................22

29 I ................................ Construction Ratchet ..............................................................12

2.20 .............................. Truck Workshop Kit .................................................................186

299 ................................ Drain Plug Spanner ...................................................................99

2.30 .............................. Industrial Puller Kit ..................................................................186

2A .................................. Heavy Duty Ring Spanner.......................................................12

2.40 ............................... Construction Machine Puller Kit.........................................186

2AR ............................... Extension Tube ...........................................................................12

20 EAU-3 ..................... Socket Set 1/4”............................................................................20

3019 ............................. Converter 3/8” to 1/2”...............................................................26

20 EMZ ........................ Socket Set 1/4”............................................................................20

3020 ............................. Reducer 3/8” to 1/4” ..................................................................27

20 MDX ........................ Socket Set 1/4”............................................................................20

304 ................................ Half-Moon Ring Spanner Sets ...............................................11

20 NZA ........................ Socket Set 1/4”............................................................................21

304 ................................ Half-Moon Ring Spanners (MM) (AF) ..................................11

20 NZI .......................... Socket Set 1/4”............................................................................21

306 ................................ Ring Slogging Spanners (MM) (AF) ....................................16

2030 ............................. Converter 1/4” to 3/8”...............................................................24

3081.............................. L-handle 3/8”................................................................................27

2087.............................. Sliding T-Bar 1/4” ........................................................................23

3087.............................. Sliding T-bar 3/8”........................................................................27

2088.............................. Flexible Extension 1/4”.............................................................24

3090.............................. Extension 3/8” .............................................................................27

2090.............................. Extension 1/4” .............................................................................23

3093-U3 ...................... Reversible Ratchet 3/8”............................................................25

2093-U3 ...................... Reversible Ratchet 1/4”............................................................21

3093-Z/94 .................. Reversible Ratchet & Coupler 3/8”.......................................25

2093-U10 ................... Reversible Ratchet 1/4”............................................................21

3094 ............................. Coupler 3/8”.................................................................................26

2093-Z/94 .................. Reversible Ratchet 1/4”............................................................22

3095 ............................. Universal Joint 3/8”....................................................................26

2094 ............................. Coupler 1/4”.................................................................................23

3096 ............................. Power Bar 3/8”.............................................................................27

2095.............................. Universal Joint 1/4”....................................................................24

3114.............................. Crowfoot Spanner .....................................................................17

2097.............................. Swivel Handle 1/4”.....................................................................23

3219.............................. Reducer 3/4” to 1/2” .................................................................46

2098.............................. Driving Handle 1/4”...................................................................24

3221.............................. Converter 3/4” to 1”...................................................................46

210 ................................ Chain Pipe Wrench ....................................................................87

3287.............................. Sliding T-bar 3/4”........................................................................45

2132.............................. Reducer 1“ to 3/4” AF................................................................49

3290.............................. Extension Bar 3/4”......................................................................45

2133.............................. 3C Nut Drivers .............................................................................67

3293 DJ........................ Repair Kit 3/4”..............................................................................46

2133.............................. 3C Nut Driver Sets......................................................................67

3293 U-1...................... Reversible Ratchet 3/4”............................................................43

2150.............................. 3C Screwdriver ...........................................................................63

3293 U-1...................... Repair Kit 3/4”..............................................................................46

2153.............................. 3C Stubby Screwdriver.............................................................64

3293 U-2...................... Reversible Ratchet 3/4”............................................................43

2150-2160 PH............ 3C Screwdriver Sets...................................................................65

3293 U-2...................... Repair Kit 3/4”..............................................................................46

2160 PH ....................... 3C Screwdriver ............................................................................63

3293 Z .......................... Repair Kit 3/4” .............................................................................46

2160 PZ........................ 3C Screwdriver ............................................................................63

3293 Z/94 .................. Reversible Ratchet 3/4”............................................................43

2161 PH ....................... 3C Stubby Screwdriver - Philip..............................................64

3293/500 .................... Double Johnny Ratchet 3/4”..................................................44

2163 TX........................ 3C Torx® Screwdrivers...............................................................64

3293/500-24x30 ....... Double Johnny Ratchet 3/4”..................................................44

2163 TX........................ 3C Torx® Screwdriver Set .........................................................65

3294 ............................. Square Coupler 3/4”..................................................................46

2187.............................. Sliding T-Bar 1” ............................................................................48

3295.............................. Universal Joint 3/4”....................................................................46

2190.............................. Extension Bar 1”..........................................................................49

3296.............................. Power Bar 3/4”.............................................................................45

2193 U-3...................... Reversible Ratchet .....................................................................47

3296.............................. Repair Kit 3/4”..............................................................................46

2193-Z94..................... Reversible Ratchet .....................................................................47

36................................... Oil Filter Strap Wrench .............................................................93

2194.............................. Square Coupler ...........................................................................49

38................................... Tyre Lever......................................................................................93

2195.............................. Universal Joint.............................................................................49

39................................... Tyre Lever......................................................................................93

220 ................................ Steel Pipe Cutter.........................................................................89

40................................... Hook Spanner .............................................................................17

2200.............................. Number Set ................................................................................131

400 ................................ Flare Nut Spanner (MM) (AF) .................................................13

2201.............................. Letter Set .....................................................................................131

4400.............................. Flare Nut Spanner Set...............................................................13

225 ................................ Pipe Wrench - Stillson Type ....................................................86

403 ................................ Hacksaw ........................................................................................98

227 ................................ Pipe Wrench - American Pattern ..........................................86

40Z ................................ Pin Spanner ..................................................................................17 227

TECHNOLOGY AND SAFETY ARTICLE INDEX

ARTICLE INDEX Article No.

ARTICLE INDEX Page

Article No.

Page

407 ................................ Hacksaw ........................................................................................98

7118 ............................. Open End Fitting ......................................................................165

4101.............................. Torcofix SE - Torque Wrench.................................................147

7212 ............................. Ring End Fitting ........................................................................165

4150 / 4151 ................ Torcofix FS - Torque Wrench .................................................147

7218 ............................. Ring End Fitting ........................................................................165

42................................... Allen Key Sets ..............................................................................68

7412 ............................. Ratchet Head ............................................................................166

42................................... Allen Key (MM) (AF) ...................................................................68

7418 ............................. Ratchet Head .............................................................................166

424 ................................ Tin Snips - Ideal Pattern ...........................................................89

753 ................................ Dremometer - Mini Torque Wrench...................................155

425 ................................ Tin Snips - Figure Pattern ........................................................89

754 ................................ Ratchet Head ............................................................................166

42KL ............................. Ball Head Allen Key Set ............................................................69

756 ................................ Torque Screwdriver .................................................................162

42L ................................ Allen Key .......................................................................................69

759 ............................... TSN Slipper Torque Wrench..................................................156

42L ................................ Allen Key Sets ..............................................................................68

760 .............................. Breaking Torque Wrench .......................................................159

42SCKL......................... Ball Head Allen Key Set ............................................................70

761 ............................... TSP Slipper Torque Wrench ..................................................157

42SCL ........................... Allen Key Set ................................................................................69

762 ............................... Slipping Torque Wrench ........................................................157

42T ................................ Allen Key (MM) (AF) ...................................................................69

7R ................................. Ratchet Spanner Sets ..................................................................9

43KTX........................... Ball Head Torx Key Set ..............................................................70

7R ................................. Ratchet Spanners ..........................................................................9

43TV ............................. Torx Gauge Tester ......................................................................71

8000 - A0-A4 .............. Circlip Pliers - External Straight.............................................82

43TX ............................ Torx Allen Key..............................................................................70

8000 - A01-A41 ......... Circlip Pliers - External Bent ...................................................82

43TX ............................. Torx Allen Key Set ......................................................................70

8000 - A5..................... Circlip Pliers - External Straight.............................................82

43TXL .......................... Long Torx Allen Key...................................................................71

8000 - A51 .................. Circlip Pliers - External Bent ...................................................82

43TXL ........................... Long Torx Allen Key Sets .........................................................71

8000 - J0-J4 ................ Circlip Pliers - Internal Straight..............................................83

44................................... Caliper Face Spanner ................................................................17

8000 - J01-J41 ........... Circlip Pliers - Internal Bent ....................................................83

4530.............................. Towrope ........................................................................................98

8000 - J5 ...................... Circlip Pliers - Internal Straight..............................................83

4549.............................. Torcofix K - Torque Wrench ...................................................147

8000 - J51 ................... Circlip Pliers - Internal Bent ....................................................83

4550.............................. Torcofix K - Torque Wrench ...................................................146

8112 ............................. Round Nose Pliers......................................................................76

4611.............................. Power Testing Screwdriver .....................................................66

8120.............................. Flat Nose Pliers ............................................................................76

5.10 ............................... Puller Safety Cover ..................................................................183

8132.............................. Telephone Pliers - Straight......................................................76

50................................... Spark Plug Socket ......................................................................93

8132AB ........................ Telephone Pliers - Angled .......................................................76

5017.............................. JAZZ Tool Assortment ............................................................101

8133.............................. Multiple Pliers..............................................................................77

502 ................................ Motorist Toolkit.........................................................................101

8135 ............................ Telephone Pliers .........................................................................76

534 ................................ Swivel Wrench .............................................................................10

8136.............................. Mechanicâ&#x20AC;&#x2122;s Pliers ........................................................................77

534 ................................ Swivel Wrench Sets ...................................................................10

8146.............................. Wire Stripping Pliers .................................................................79

54................................... Spark Plug Socket ......................................................................94

8147.............................. Heavy Duty Cable Stripping Tool .........................................80

55................................... Spark Plug Spanner ...................................................................94

8148 ............................. Stripping Tool for Data Cable ................................................80

58................................... Spark Plug Spanner ...................................................................94

8178 ............................ Bolt Cutters ..................................................................................88

6 .................................... Open Ended Spanners .............................................................14

8178 ............................ Bolt Cutter Spares ......................................................................88

62................................... Adjustable Wrench ....................................................................15

8200.............................. Torque Angle Indicator ..........................................................155

620C ............................. Club Hammers ..........................................................................132

8220 ............................. Universal Puller with Twin Grip ...........................................180

622C ............................. Copper Sledge Hammers ......................................................133

8250 ............................. Combination Pliers - Heavy Duty .........................................74

640S .............................. Sledge Hammers ......................................................................133

8260.............................. Fencing Pliers ..............................................................................74

640 ................................ Magnetic Lifter............................................................................95

8276 ............................. Balance-Weight Pliers...............................................................96

642 SP .......................... Magnetic Lifter............................................................................95

8301 / 8302 ............... Dial Measuring Torque Wrench...........................................161

647 ................................ Spark Plug Brush ........................................................................94

8316 ............................. Side Cutters - American Pattern ...........................................75

687 ................................ Screwdriver Bits - Torx ..............................................................75

8320 JL......................... Wire Rope Cutters ......................................................................79

690 ................................ Screwdriver Bits - PH.................................................................71

8340 / 8340Z ............. Mini Bolt Cutters.........................................................................88

690 ................................ Screwdriver Bits - PZD ..............................................................71

8380.............................. Tower Pincers ..............................................................................75

7 ..................................... Combination Spanners ...............................................................8

8381.............................. Pincers............................................................................................75

7 ..................................... Combination Spanner Sets .......................................................8

8516.............................. Tin Snips - Scissors Pattern .....................................................89

702 ................................ Feeler Gauge Set - Fan Pattern ..............................................97

8531.............................. Tin Snips - Straight Pattern .....................................................89

7112 ............................. Open End Fitting ......................................................................165

8551.............................. Bolt Extractor Set .....................................................................184

228

ARTICLE INDEX Article No.

ARTICLE INDEX Page

Article No.

Page

8554.............................. Dremometer Torque Wrench ...............................................152

Club Hammers ..........................................................................................................132-133

8560.............................. Dremometer Torque Wrench ...............................................152

Construction Machinery Toolkit.........................................................................196/197

8561.............................. Dremometer Torque Wrench ...............................................152 8562.............................. Puller - Twin Grip ......................................................................180

8562.............................. Dremometer Torque Wrench ...............................................153

D19 ............................... Socket (MM) (AF) 1/2”...............................................................36

8563.............................. Puller - Triple Grip ....................................................................180

D19 ............................... Socket Sets .............................................................................28-34

8563 D & DR............... Dremometer Torque Wrench ...............................................153

D19L ............................ Extra Deep Socket Bi-hexagon..............................................37

8564 ............................. Puller - Twin Grip ......................................................................181

D21 ............................... Sockets 1”......................................................................................48

8564.............................. Dremometer Torque Wrench ...............................................154

D21 EMU ..................... Socket Set 1” ................................................................................47

8565.............................. Puller - Triple Grip ....................................................................181

D30 ............................... Socket (MM) (AF) 3/8”...............................................................25

8566.............................. Puller - Twin Grip ......................................................................181

D30FMZ....................... Socket Set 3/8”............................................................................24

8567.............................. Puller - Triple Grip ....................................................................181

D30HMZ...................... Socket Set 3/8”............................................................................24

8568.............................. Puller - Twin Grip .....................................................................181

D32 ............................... Socket (MM) (AF) ........................................................................44

8569.............................. Puller - Triple Grip ....................................................................181

D32 ............................... Socket Sets .............................................................................42-43

8570.............................. Dremometer Torque Wrench ...............................................154

DMK .............................. Dremaster Torque Wrench ....................................................149

8571.............................. Dremometer Torque Wrench ...............................................154

DMSE............................ Dremaster Torque Wrench ....................................................149

8572.............................. Dremometer Torque Wrench ...............................................153

DT 2142-008 3C ........ Torx Screwdriver Set .................................................................65

8573.............................. Dremometer Torque Wrench ...............................................153

DVI-20L/Z & 28L/Z ... Dremoplus Torque Multiplier .....................................172-173

8600.............................. Stud Extractor ...........................................................................183

DVV-13Z ..................... Dremoplus Torque Multiplier .....................................170-171

8601.............................. Ball Pein Hammer.....................................................................130

DVV-540RS ................ Dremoplus Torque Multiplier ..............................................177

8612 ............................ Torque Calibration Analyser.................................................163

DVV-40Z & 40ZRS .... Dremoplus Torque Multiplier ..............................................175

8612 ............................ Electronic Tester .......................................................................163

DVV-60-130ZRS ........ Dremoplus Torque Multiplier ..............................................176

8612-3150 ................. Electronic Tester .......................................................................163 8801.............................. Torque Wrench..........................................................................160

907 ................................ Fender Protector ........................................................................99

E 142 A/10 .................. Spares - Screw & Nut.................................................................87

95................................... Flat Cold Chisel .........................................................................130

E 143 A/10 .................. Spares - Screw & Nut.................................................................87

95 HS ............................ Flat Cold Chisel & Hand Guard ............................................130

E 145 A/10 .................. Spares - Screw & Nut.................................................................87

96................................... Cross-Cut Chisel........................................................................130

E 210 A ......................... Spares - Chain..............................................................................87

96 HS ............................ Cross-Cut Chisel & Hand Guard ..........................................130

E 210 B ......................... Spares - Pair of Jaws ..................................................................87

99................................... Drift Punch .................................................................................131

E 225 A ......................... Spares - Frame.............................................................................86 E 225 B ......................... Spares - Knurl ..............................................................................86

E 225 C ........................ Spares - Hook ..............................................................................86

Apprentice Toolkits ................................................................................................194-203

E 225 D ....................... Spares - Pin ...................................................................................86

Artisan’s Toolkits.......................................................................................................204-213

E 225 EF ...................... Spares - Rivet & Spring .............................................................86

ATB SE Adjustable Breaking Torque Wrench...........................................................159

E 227 A ........................ Spares - Spring ............................................................................86

Automotive Electrician’s Toolkit ..................................................................................199

E 227 B ......................... Spares - Knurl ..............................................................................86 E 227 C ......................... Spares - Jaw & Pin ......................................................................86

E 227 D ........................ Spares - Hook ..............................................................................86

Brass Pump Oil Can ............................................................................................................98

E8000A ........................ Spares - Tips .................................................................................82

Breaker Torque Wrenches .....................................................................................158-160

E8000J ......................... Spares - Tips .................................................................................83 E-8147 .......................... Spare Blade ..................................................................................80

E-8148 .......................... Spare Blade ..................................................................................80

C19 ................................ Socket (MM) (AF) 1/2”...............................................................36

E-8178 .......................... Replacement Cutting Head....................................................88

C19 ................................ Socket Sets .............................................................................28-34

Electrician’s Light Current Toolkit ...............................................................................206

C32 ................................ Socket (MM) (AF) 3/4”..............................................................44

Electrician’s Medium Current Toolkit .........................................................................207

C32 ................................ Socket Sets ...................................................................................42

Electrician’s & Refrigeration Mechanic’s Toolkit.....................................................200

Capture Calibration Analyser ..............................................................................163-164

Electrician’s Toolcase .......................................................................................................100

Car Workshop Puller Kit..................................................................................................187

Electrician’s Toolset .................................................................................................141/211 229

TECHNOLOGY AND SAFETY ARTICLE INDEX

ARTICLE INDEX Article No.

ARTICLE INDEX Page

Article No.

Page

Engineer’s Scriber ...............................................................................................................97

ITX19B.......................... Torx Allen Key Socket - Male 1/2”.........................................39

Engineer’s Square ...............................................................................................................97

ITX19L .......................... Long Torx Allen Key Socket - Male 1/2”..............................39

EV 150/200 ................. Spares - Engineering Vice .....................................................117

ITX20 ............................ Screwdriver Bit Socket 1/4” ....................................................23

EV150/200 .................. Engineering Vice ......................................................................117

ITX30 ............................ Torx Allen Key Socket - Male 3/8”.........................................26 ITX19/TX19 FMT ....... Torx Allen Key Socket Set - Male & Female .......................34

F Farmer’s Toolkit .................................................................................................................208

J Junior Hacksaw ...................................................................................................................98

G G-Clamps ...............................................................................................................................99

General Artisan’s Toolkit .................................................................................................209

K19 ................................ Impact Sockets 1/2” ..................................................................53

GED0130 ..................... Non-Sparking Combination Spanners .............................190

K19 ................................ Impact Socket Set ......................................................................52

GED0130 ..................... Non-Sparking Combination Spanners Sets....................190

K1900 ........................... Impact Driver...............................................................................54

GED035 ....................... Non-Sparking Hexagon Sockets 1/2”................................191

K1900 ........................... Impact Driver Set .....................................................................52

GED0360 ..................... Non-Sparking Reversible Ratchet 1/2”.............................191

K19L.............................. Impact Socket .............................................................................53

GED042 ....................... Non-Sparking Extensions 1/2” ............................................191

K21 ................................ Impact Socket .............................................................................57

GED410 ....................... Non-Sparking Swivel Handles 1/2”....................................191

K21L.............................. Impact Socket - Long Pattern ................................................57

GED0400 ..................... Non-Sparking Sliding T-Bar 1/2” .........................................192

K32 ................................ Impact Socket .............................................................................55

GED0400 ..................... Non-Sparking Universal Joint 1/2”.....................................192

K32L.............................. Impact Socket .............................................................................55

GED0430 ..................... Non-Sparking Socket Set 1/2” .............................................192

K37 ................................ Impact Socket .............................................................................59

GED080 ....................... Non-Sparking Screwdriver Set ...........................................192

KB1932 ........................ Impact Socket Converter ........................................................53

GED053 ....................... Non-Sparking Pipe Wrench ..................................................193

KB1970/75 .................. Safety Rings & Pins ....................................................................54

GED048 ....................... Non-Sparking Adjustable Wrenches .................................193

KB1990 ........................ Impact Extension .....................................................................54

GED060 ....................... Non-Sparking Combination Pliers .....................................193

KB1995 ........................ Impact Universal Joint .............................................................54

GED066 ....................... Non-Sparking Power Side Cutters .....................................193

KB2132 ........................ Impact Socket Reducer ............................................................58 KB2137 ........................ Impact Socket Converter ........................................................58

KB2170/75 .................. Safety Rings & Pins ....................................................................58

HSP ............................... Hydraulic Pressure Spindle...................................................182

KB2190 ........................ Impact Extension .......................................................................58 KB2195 ........................ Impact Universal Joint .............................................................58

KB3219 ........................ Impact Socket Reducer ............................................................56

IKS19 ............................ Allen Key Socket - Phillips & Pozzidriv Bits 1/2”...............39

KB3221 ........................ Impact Socket Converter ........................................................56

IKS20 ............................ Screwdriver Bit Socket 1/4” ....................................................22

KB3270/75 .................. Safety Rings & Pins ....................................................................56

IKS20 PZD ................... Screwdriver Bit Socket 1/4” ....................................................23

KB3290 ........................ Impact Extension .......................................................................56

IN19 .............................. Allen Key Socket (MM) (AF) 1/2” ...........................................37

KB3295 ........................ Impact Universal Joint .............................................................56

IN19 .............................. Allen Key Socket Sets ...............................................................33

KB3721 ........................ Impact Socket Reducer ............................................................59

IN19L ............................ Extra Long Allen Key Socket 1/2” .........................................38

KB3770/75 .................. Safety Rings & Pins ....................................................................59

IN20L ............................ Screwdriver Bit Socket 1/4” ....................................................22

KB3790 ........................ Impact Extension .......................................................................59

IN30 .............................. Allen Key Socket 3/8”................................................................26

KD-26R......................... Tubular Box Spanner Set .........................................................92

IN32 .............................. Allen Key Socket 3/4”................................................................45 Industrial Puller Kit...........................................................................................................187

INK19............................ Impact Allen Key Socket 1/2”.................................................53

Mechanic’s Toolkit ............................................................................................................198

INK21............................ Impact Allen Key Socket 1”.....................................................58

Merchandiser Concepts ........................................................................................214-217

INK32............................ Impact Allen Key Socket 3/4”.................................................55

MV 100/150 ............... Spares - Mechanic’s Vice .......................................................117

INR19L ......................... Allen Key Socket - Long Spline Ribe 1/2”...........................38

MV 100/150 ............... Mechanic’s Vice.........................................................................117

INX19 - INX19L.......... Allen Key Socket - Spline Bit 1/2” .........................................38 IS20 ............................... Screwdriver Bit Socket 1/4” ....................................................23

ITX19 ............................ Torx Allen Key Socket - Male 1/2”.........................................38

Non-Spark Range ....................................................................................................188-193

ITX19 ............................ Torx Allen Key Socket Set - Male 1/2” .................................34 230

ARTICLE INDEX Article No.

ARTICLE INDEX Page

Article No.

Page

Safety Glasses & Bag ......................................................................................................98

Pegboard Accessories ....................................................................................................118

Sledge Hammers ..............................................................................................................133

Precision Engineering Tools............................................................................................97

Steel Ruler .............................................................................................................................96

REF 10SD .................... 10 ScrewdriverAssortment ...................................................126

TBN Breaking Torque Wrench ......................................................................................159

REF A ............................ C19/22 Assortment .................................................................124

Technician’s Rucksack Toolkit .......................................................................................210

REF B............................. C19 Assortment ........................................................................124

TLS PRO Preset Torque Screwdriver ...........................................................................162

REF C ............................ 1B Assortment ..........................................................................124

Tool Bags & Rucksacks ....................................................................................................100

REF D ............................ C19/IN19 Assortment .............................................................124

Tool Jacket ..........................................................................................................................100

REF E ............................. 1B/62H Assortment.................................................................125

Torque Screwdrivers ....................................................................................................162

REF F ............................. D19/ACC/SKT Assortment ....................................................125

TSC Slipper Torque Wrench...........................................................................................157

REF G ............................ C32/6 Assortment....................................................................125

TT3KH 350 ................. Torcotronic III Electronic Torque Wrench.........................160

REF H ............................ D19/22/ACC Assortment .......................................................125

TX19 ............................. Torx Socket - Female 1/2”........................................................39

REF I .............................. D19 Assortment .......................................................................125

TX19 ............................. Torx Socket Set - Female 1/2” ................................................34

REF J ............................. D19/IN19 Assortment ............................................................125

TX30 ............................. Torx Socket - Female 3/8”........................................................26

REF K............................. D32/6 Assortment ...................................................................126

TX4 ................................ Flat Ring Spanner.......................................................................11

REF L ............................. PL/137/36 Assortment ...........................................................126 REF MF ......................... PL/81/82/83 3 Pliers Assortment........................................126

REF M ........................... PL/81/82/83 3 Pliers Assortment........................................126

V 4614 PLUS .............. Voltage Tester ............................................................................140

REF N-10 ..................... 10 Screwdriver Assortment ..................................................126 REF O ........................... 6 Screwdriver Assortment ...................................................127 REF OF ......................... 6 Screwdriver Assortment ...................................................127

VDE 2160 PH ............. Phillips Screwdriver .................................................................137

REF P ............................ 4 EXT - T/BAR Assortment .....................................................127

VDE 2170 ................... Electrician’s Screwdriver ........................................................137

REF PF ......................... 4 Extension + T/Bar Assortment .........................................127

VDE 2133 .................... Nut Driver ...................................................................................136

REF Q ........................... 4 ACC - Power Bar Assortment ...........................................127

VDE 2133 .................... Nut Driver Set ............................................................................136

REF QF.......................... 4 Acc+Power Bar Assortment ..............................................127

VDE 2E ......................... Single Ended Spanner ............................................................136

REF RF .......................... C19/Z94 Assortment...............................................................127

VDE 4507 .................... Torque Wrench..........................................................................137

REF SF .......................... 1B/145 Assortment .................................................................127

VDE 4522 .................... Cable Knife .................................................................................140

REF VF ......................... Ph & Stubby Screwdriver Assortment ..............................126

VDE 8098 H ................ Stripping Pliers..........................................................................138

REF WF ........................ Mec & Elec Screwdriver Assortment .................................126

VDE 8099 H ................ Stripping Pliers .........................................................................139

RL-DVV13 .................... Reaction Arm .............................................................................171

VDE 8120 H ................ Flat Nose Pliers .........................................................................139

RL-DVV-60-80 ............ Reaction Arm .............................................................................176

VDE 8122 H ................ Round Nose Pliers....................................................................139

RL-DVI 20/28 .............. Reaction Arm .............................................................................173

VDE 8132 H ................ Telephone Pliers .......................................................................138

RL-DVV40 ................... Reaction Arm .............................................................................175

VDE 8132AB H........... Telephone Pliers - Angled .....................................................139 VDE 8250 H ................ Combination Pliers ..................................................................138

VDE 8314 H ................ Side Cutters ................................................................................138

S8000 ........................... Circlip Pliers Set ..........................................................................84

VDE 8316 H ................ Side Cutters - American Pattern .........................................138

S8000 AE ..................... Circlip Pliers Set ..........................................................................84

VDE 894 ...................... Single Open Ended Spanner................................................136

S8000 JE ...................... Circlip Pliers Set ..........................................................................84

VDE 2160-2170 ......... Screwdriver Set .........................................................................137

S8003 JC ..................... Pliers Set ........................................................................................78 S8140 A ....................... Crimping Pliers Set - Automotive.........................................81 S8140 D ....................... Crimping Pliers Set - Data Com.............................................81 S8140 E ........................ Crimping Pliers Set - Electronics...........................................81 S8140 J ........................ Crimping Pliers Set - Industustrial .......................................81 S8303 JC...................... Pliers Set ........................................................................................78 S8393 ........................... Pliers Set ........................................................................................78 Sortimo General Tool Assortment .............................................................................101 231

TECHNOLOGY AND SAFETY ARTICLE INDEX

232

“Our guarantee covers all tools against breakage under normal working conditions and is subject to fair wear and tear.”

We strive to increase the value for all stakeholders and to be a preferred supplier, employer and customer.

GEDORE TOOLS SA

TORQUE WRENCH WARRANTY &

WARRANTY POLICY

CALIBRATION POLICY

Motivation and People Centred We acknowledge that our employees are the key to our success. © Copyright by Gedore Tools SA (Pty) Ltd.

Team Work and Mutual Respect We encourage and support team participation, effective communication and mutual respect.

We motivate employees by providing opportunities for advancement, sharing information, fair treatment, training, job security and workplace safety.

ASHBURTON

(03) 308 3147

NORTH SHORE

(09) 414 7214

DARGAVILLE

(09) 439 7335

OAMARU

(03) 434 6956

FRANKTON

(07) 847 4994

PALMERSTON NORTH

(06) 357 8888

GISBORNE

(06) 868 8214

PUKEKOHE

(09) 238 1800

GORE

(03) 208 4882

RANGIORA

(03) 313 3425

HASTINGS

(06) 870 4450

ROTORUA

(07) 347 9110

HAWERA

(06) 278 4185

TAKAKA

(03) 525 9847

INVERCARGILL

(03) 218 2059

TE AWAMUTU

(07) 871 7062

MORRINSVILLE

(07) 889 7681

TE RAPA

(07) 847 4994

MT MAUNGANUI

(07) 575 0504

TIMARU

(03) 684 7036

NAPIER

(06) 842 2304

TOKOROA

(07) 886 1700

NELSON

(03) 547 8000

WANGANUI

(06) 344 4804

NEW PLYMOUTH

(06) 758 5133

WESTPORT

(03) 789 7033

20 20

TradeZone NZ Locations

TOTALRANGE

NORTH SHORE PUKEKOHE FRANKTON MORRINSVILLE MT MAUNGANUI TE RAPA

TOTALRANGE

TOKOROA

TAKAKA

RANGIORA

OAMARU

2020

ASHBURTON