BurButler
The Dental Bur Management System
Your dental bur block is one of those essential items that is often taken for granted. The ability to access the sterile bur of your choice with ease is one of those small things that we have to do many times a day, often many times a patient.
Even if you use single use burs, BurtButler allows you to present these as a set. Just discard and replace the ones you use. This gives you a full option of the burs YOU want.
The BurButler is available in many colours: BurButler is a solid block of AUTOCLABALE silicon. The cover / lid is an AUTOCLAVABLE Polymer
• BurButler allows each dentist or each procedure to be colour coded.
• BurButler improves practice organisation, safety, efficiency and costs
• BurButler is a simple solid one-piece medical grade silicon.
• BurButler has no removable elements.
• BurButler has no deterioration of the bungs as found in many bur blocks.
• Other bur blocks can have cost of bungs to replace. Surface deterioration of these bungs is difficult to see. The bungs fit the metal case mechanically. The internal fit and interface of the bung cannot be accessed during washing.
• Any hole fits any bur - Any bur fits any hole
• BurButler is non-magnetic.
• Magnetising the burs presents a hazard if magnetised burs are inadvertently picked up by other instruments with a supine patient
• BurButler has parabolic contour of the holes that allows the end diameter of the bur to grip the base.
• This gives you the ability to store any combination of dental burs on one burblock.
• This reduces handling of the burs by the team and potential sharps incidents.
• This improves efficiency in cleaning and access to your selection of burs.
• This keeps each bur separate during sterilisation procedures and negates the use of “Bur Baskets” which do not separate the burs during sterilisation.
• BurButler medical grade silicone base and high strength polymer lid are both autoclavable.
• BurButler is the only BurBlock with a “transparent fully autoclavable “closed cover” to offer aerosol/dust control.
• The cover has a “skirt” of lateral ribs to allow spacing between the base and lid for steam penetration.
• The holes are through and through for steam penetration.
• Plastic bur stands that cannot be autoclaved do not meet sterilization standards.
• Individually wrapped drills are not practical in a busy practice.
• To open single use burs during a procedure one still has to fish through the storage area and do do this one has to remove ones gloves or cross contaminate the other pouches.
• The assistants will LOVE the BurButler. It saves so much time.
• The practice management will LOVE the BurButler – it reduces lost burs and increases efficiency.
BurButler. The Dental Bur Management System Instructions for Use
BurButler Dental Bur Blocks, as part of our Dental Bur Management System are designed to: Allow you to organise and care for your dental burs by dentist, by surgery, by procedure and make your dental practice more organised and efficient. Set-up.
• Uniquely to the BurButler, any bur of any diameter may be placed in the BurButler in any order you require wether friction grip or latch grip or lab grip to suit your need
• Please note the force that you insert the bur will be the force required to remove the bur. Do not jam the bur in too tightly as you will have to pull equally to remove it.
• We recommend a particular colour for a particular surgery, or procedure.
• There are no moving parts,
• The natural material quality of the silicon will resist normal clinical repeated wear and function and actively discourage bacterial growth.
• In clinical use, we recommend that burs once removed from the BurButler during a procedure should be placed in the inverted lid of the BurButler.In this way any burs used during the procedure can be identified for special attention.
• The user should at all times wear gloves when handling Dental Burs.
• After clinical use, inspect each bur individually before re-inserting it into the BurButler to ensure any gross
• debris removal.
Ultrasonic cleaning.
• Prepare a fresh pH neutral cleaning solution following the manufacturers instructions for correct concentration, exposure time, water temperature and quality.
• Place the BurButler with the lid removed in a sonic unit ensuring the device is completely submerged for at least 15 minutes.. Beware that untested concentrations of the many and varied ultrasonic agents may have deleterious effect over time.
• Rinse thoroughly for 1 minute.
• Visually inspect to confirm removal of any gross debris.
• There are no moving parts or hinges to deteriorate with the BurButler or to “hide” bacteria.
• There are no metal parts to rust. There are no silicon “Bungs” to replace.
• Washer Disinfector.
• We recommend that the lids are washed separate to the block at this stage. Do Not Invert the lids. This allows adequate drainage and prevents water accumulating.
• Once the cycle has been completed the lids can be placed onto the BurButler bases. Autoclave.
• The base and lid should be assembled (and may be bagged in sterilisation pouch if required ) prior to autoclaving.
• Follow the autoclave manufacturer instructions as recommended to achieve sterilisation temperature 134C ( 273F ) for 5 min or 121C for 20 min.
Storage.
• The BurButler set should then be stored. (and labelled appropriately as required by some authorities).
• Silicon is quite stain resistant. If a steel bur corrodes and marks the surface, any rust residue will wash off
• a soft cloth and ultrasonic cleaning.
• Do not insert rusting burs and this will not occur.
For Bacteriological report please see our website http://dentalorganiser.com/bacteriologicalreport.html
Available from DentalOrganiser / Steriliu. GarryNagry Roscahill Galway Ireland. www.steriliu.com
And selected dealers worldwide
Australia: Amalgadent , Canada: Henry Schein Ca Denmark Sweden: Nordenta , France Cadence GACD , Netherlands: 4 Clever Dental , Norway: Technomedics, Spain: Akura , UK: Trycare USA: Hager Worldwide
BurButler Videos and Blog
BurButler Blog