Valid from 1 September 2011
CATALOGUE
PUBLIC PREMISES
WALLS, CEILINGS AND FLOORS
PROFILES HATCHES
ALUMINIUM FRAME
IMPACT GUARDS, HANDRAIL AND
ENTRANCE CARPETS
SUPPORT HANDLES
DUURI OY Tapulikaupungintie 35 PL 26, 00750 Helsinki FINLAND Tel. (09) 351 050 fax (09) 3510 5222 duuri@duuri.fi
D-PROFILE AB Kabelvägen 10 55302 Jönköping SWEDEN Tel. +46-(0)36-186363 Fax +46-(0)36-186366 info@d-profile.se
SIA D-profile Rīgas iela 6 LV-2114 Olaine LATVIA Tel. +371 67783506 Fax +371 67783508 info@d-profile.lv
ООО «Дюри Профайл Рус» Россия 143362 Москва РОССИЯ г.Апрелевка, Сентябрьская ул., д.12 Тел. +7-495-982 3875 Факс: +7-495-982 3875 Эл. почта: duuri@duuri.ru
www.dione.fi www.dionepro.fi
D-PROFILE AS Revefaret 12 3060 Svelvik NORWAY Mobile +47 90 47 06 30 Fax +47 33 77 32 43 info@d-profile.no
CATALOGUE The DionePro selection provides you with quality products for professional use. The products are ideal for public premises and designed to withstand extremely hard wear and tear. • Profiles for public premises • Manholes as well as wall and ceiling access hatches • Handrails and impact guards • Carpets for entrance tambours • Accessibility products
CONTENT OF THE CATALOQUE COVER STRIPS.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .8 FIRE THRESHOLDS... . .. . .. . .. . .. . .. . .. . .. . .. 9 EDGE TRIMS.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .9 RAMPS WITH LEVEL DIFFERENCE... ..10 END PROFILES... . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. 11 STAIR EDGE PROFILES.. . .. . .. . .. . .. . .. . .. . .12 TILING PROFILES... . .. . .. . .. . .. . .. . .. . .. . .. . .. 20 CORNER PROTECTION PROFILES... . .. 22 SKIRTINGS ... . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. 23 COLUMN COLLARS .. . .. . .. . .. . .. . .. . .. . .. . .24 CURVED PROFILES... . .. . .. . .. . .. . .. . .. . .. . .. 25 CUSTOM-MADE PRODUCTS... . .. . .. . .. 25
VINYL-COATED HANDRAILS.. . .. . .. . .. . .60 VINYL-COATED IMPACT GUARDS ... ..62 VINYL-COATED CORNER PROTECTION PROFILE.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .63 SHOPPING TROLLEY SHELTERS ... ... ..65 CORNER PROTECTION PROFILES FOR PARKING HALL.. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. 65 IMPACT GUARDS FOR PARKING HALL... . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. 66 SUPPORT HANDRAILS FOR SENIOR CITIZENS’ HOMES AND ASSISTED LIVING FACILITIES .. . .6
EXPANSION JOINT PROFILES... . .. . .. . .. 26 ENTRANCE CARPETS WITH ALUMINIUM FRAME... . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. 29 INSPECTION AND ACCESS HATCHES... . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. 32
COLOUR MAP... . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. . .. 64 FREQUENTLY ASKED QUESTIONS... . .. . .70 DELIVERY TERMS... . .. . .. . .. . .. . .. . .. . .. . .. . .. . .71
Minor things often matter most
Therefore DionePro is the best solution
DionePro - high-quality products for professional use Our selection includes a variety of options for products and solutions that withstand hard wear and tear in public premises. First-rate DionePro products are designed for professional use in particular, which makes it easy to create impressive general impressions with minor but significant details in tones. Ordering our standard products is easy by using the product's specific product code. Samples of most of our products are available on order and enable you to decide whether they fit in with the rest of your interior decoration.
PROFILES FOR PUBLIC PREMISES When you need elegant and reliable solutions.
Quality DionePro profiles made of stainless steel are designed for public premises and withstand extremely hard use. Stylish and strong materials preserve their fresh and modern look for a long time. Our selection includes a wide variety of impressive and durable profile options. All DionePro profiles are tested for wear and tear in accordance with our quality system. We also make every effort to ensure that the delivery speed of our products is excellent, and the products are safe and easy to install. All our tested standard products with different mounting methods are, in no time at all, available to customers from our warehouse, which makes their installation easy and cost-effective. We also make custom-made special profiles.
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
7
8
PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
Durable finish
COVER STRIPS Public premises are most often provided with glue or screw-mounted cover strips. The cover strips separate different materials and put the finishing touches to expansion joints. Standard strips with a width of 30–120 mm are directly available from stock. Our new product, a hard CPL-coated oak imitation cover strip, is also suitable for public premises subject to hard use. The strip is provided with an inconspicuous and secure nail/plug mounting.
M FOR SEA FINISH
STAINLESS STEEL COVER STRIPS FOR PUBLIC PREMISES Material: made of ground stainless steel suitable for public premises. Material thickness 1.5 mm. Fastening: screw or glue mounting. We recommend fastening the glue-mounted strips with assembly glue. Cutting: strips are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles can be cut with a hacksaw. Applications: offices, hotels, schools, shopping centres and other public premises where no hard-wheeled pallet jacks are used.
Curved surface
Ridged centre
Ridged edges
Width/type
Length
Product code
S/O
30 mm, curved surface, without holes
300 cm
7093005-R
S
30 mm, ridged centre, without holes
300 cm
7094605-R
S
38 mm, aluminium/stainless steel, without holes
270 cm
B2 AS 270-R
S
40 mm, ridged centre, without holes
300 cm
7094505-R
S
40 mm, ridged edges, with holes
90 cm
A4 RST 90
S
40 mm, ridged edges, with holes
180 cm
A4 RST 180
S
40 mm, ridged edges, with holes
300 cm
7095305
S
40 mm, ridged edges, with holes
300 cm
7095305-R
S
45 mm, aluminium/stainless steel, plugmounted
270 cm
KI AS 270
S
50 mm, ridged edges, without holes
300 cm
7094405-R
S
50 mm, ridged edges, with holes
300 cm
7094405
S
60 mm, ridged edges, without holes
90 cm
A5 RST 90
S
60 mm, ridged edges, without holes
180 cm
A5 RST 180
S
60 mm, ridged edges, without holes
300 cm
7094905-R
S
60 mm, ridged edges, with holes
300 cm
7094905
S
70 mm, ridged edges, without holes
300 cm
7095005-R
S
70 mm, ridged edges, with side holes
300 cm
7095015
S
80 mm, ridged edges, without holes
90 cm
A6 RST 90-R
S
80 mm, ridged edges, without holes
180 cm
A6 RST 180-R
S
80 mm, ridged edges, without holes
300 cm
7094805-R
S
80 mm, ridged edges, with holes
300 cm
7094805
S
90 mm, ridged edges, without holes
300 cm
7095105-R
S
100 mm, ridged edges, without holes
90 cm
A7 RST 90-R
S
100 mm, ridged edges, without holes
180 cm
A7 RST 180-R
S
100 mm, ridged edges, without holes
300 cm
7091005-R
S
120 mm, ridged edges, without holes
90 cm
A8 RST 90-R
S
120 mm, ridged edges, without holes
180 cm
A8 RST 180-R
S
120 mm, ridged edges, without holes
300 cm
70941205-R
S
*S = IN STOCK O= ORDER PRODUCT
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
9
CPL-COATED COVER STRIPS FOR PUBLIC PREMISES Material: made of CPL-coated oak imitation aluminium profile fit for public premises. Fastening: plug mounting. Applications: offices, hotels, schools, shopping centres and other public premises where no hard-wheeled pallet jacks are used.
Width/type
Colour
Length
Product code
S/O
45 mm, CPL cover strip
Oak
270 cm
K2 OA 270
S
*S = IN STOCK O= ORDER PRODUCT
DUCT O R P NEW
FIRE THRESHOLD
The fire threshold is designed in cooperation with architects to improve the comfort and safety in assisted living facilities that have fire doors. The fire threshold surface remarkably reduces the risk of slipping, as compared with thresholds made of sheet metal. The mat silver coated profile is an impressive surface option which is commonly used in homes as well. It goes well with a number of flooring shades. Width/type
Colour
Length
Product code
S/O
250 mm, fire threshold
Silver-anodised
270 cm
GE-AA0002
O
*S = IN STOCK O= ORDER PRODUCT
The slightly curved threshold is also suitable for a level difference of a couple of centimetres. The profile thickness is 5 mm and total height 10 mm. The silver-anodised option is available for 250 mm fire thresholds.
EDGE TRIMS Material: made of ground stainless steel suitable for public premises.Material thickness 1.5 mm. An option made of stainless steel coated aluminium is also available. Fastening: screw or glue mounting. We recommend using the Duuri assembly glue for the fastening of glue-mounted profiles. Cutting:trims are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. Applications: offices, hotels, schools, shopping centres and other public premises where no hardwheeled pallet jacks are used. Width/type
Length
Product code
S/O
level difference 4.5 mm, ridged edges, with holes, width 32 mm
300 cm
7092205
S
level difference 0–12 mm, curved surface, without holes, width 40 mm
300 cm
7090405-R
S
level difference 8–15 mm, curved surface, without holes, width 50 mm
300 cm
7090905-R
S
level difference 0–12 mm, aluminium/stainless steel, without holes, width 40 mm
270 cm
B3 AS 270-R
S
*S = IN STOCK O= ORDER PRODUCT
10 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
RAMPS WITH LEVEL DIFFERENCE
DUCT O R P NEW
Wide ramps even out the level difference of different materials in renovation objects in particular, and save renovation time and costs. The ramps are designed to make the traffic easier in public premises and facilities. Length 270 mm. Type
Colour
Length
Product code
S/O
Ramp 1
Aluminium
270 cm
2062309
O
Ramp 2
Aluminium
270 cm
2062101
O
Ramp 3
Silver-anodised aluminium
270 cm
5502290
O
Ramp 4
Silver-anodised aluminium
270 cm
5502277
O
Ramp 5
Silver-anodised aluminium
270 cm
5502284
O
Ramp 6
Silver-anodised aluminium
270 cm
5502291
O
*S = IN STOCK O= ORDER PRODUCT Ramp 3 5502290 Silver-anodised aluminium
Ramp 4 5502277 Silver-anodised aluminium Ramp 1 2062309 Aluminium
Ramp 5 5502284 Silver-anodised aluminium
Ramp 2 2062101 Aluminium Ramp 6 5502291 Silver-anodised aluminium
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
END PROFILES
The end profile with a bottom rail is ideal for joining the floating floors and the threshold. It is also used instead of the skirting by the wall with floating floors. The profile package contains two bottom rails of unequal height. Of the bottom rails, the higher is used with parquet and the lower with laminate.
E7 WH 270 white
End profile with a bottom rail
Length
Product code
S/O
White 7–18 mm
270 cm
E7 WH 270
S
Silver 7–18 mm
270 cm
E7 SI 270
S
Oak 7–18 mm
270 cm
E7 OAK 270
S
E7 SI 270 silver
E7 OAK 270 oak
*S = IN STOCK O= ORDER PRODUCT
END PROFILES FOR TILES AND CARPETS
Coloured end profiles
Height
Length
Product code
S/O
Bendable end profiles
Height
Length Product code
S/O
White
6 mm
250 cm
13110
O
Brass
3 mm
250 cm
12003
O
White
6 mm
300 cm
17110
O
Brass
4.5 mm
250 cm
12053
O
White
8 mm
250 cm
13210
O
Brass
6 mm
250 cm
12103
O
White
8 mm
300 cm
17210
O
Brass
8 mm
250 cm
12203
O
White
10 mm
250 cm
13310
O
Brass
10 mm
250 cm
12303
O
White
10 mm
300 cm
17310
O
Brass
12.5 mm
250 cm
12403
O
White
12.5 mm
250 cm
13410
O
Brass
15 mm
250 cm
12503
O
White
12.5 mm
300 cm
17410
O
Aluminium
3 mm
250 cm
13003
O
Light grey
6 mm
250 cm
13140
O
Aluminium
4.5 mm
250 cm
13053
O
Light grey
8 mm
250 cm
13240
O
Aluminium
6 mm
250 cm
13103
O
Light grey
8 mm
300 cm
17240
O
Aluminium
8 mm
250 cm
13203
O
Light grey
10 mm
250 cm
13340
O
Aluminium
10 mm
250 cm
13303
O
Light grey
10 mm
300 cm
17340
O
Aluminium
12.5 mm
250 cm
13403
O
Light grey
12.5 mm
250 cm
13440
O
Aluminium
15 mm
250 cm
13503
O
Black
6 mm
250 cm
13130
O
Stainless steel
3 mm
250 cm
14003
O
Black
8 mm
250 cm
13230
O
Stainless steel
4.5 mm
250 cm
14053
O
Black
12.5 mm
250 cm
13430
O
Stainless steel
6 mm
250 cm
14103
O
Black
10 mm
250 cm
13330
O
Stainless steel
8 mm
250 cm
14203
O
Stainless steel
3 mm
250 cm
E30
S
Stainless steel
10 mm
250 cm
14303
O
Stainless steel
4.5 mm
250 cm
E45
S
Stainless steel
12.5 mm
250 cm
14403
O
9800
O
Stainless steel
6 mm
250 cm
E60
S
Bending rolls
Stainless steel
8 mm
250 cm
E80
S
*S = IN STOCK O= ORDER PRODUCT
Stainless steel
10 mm
250 cm
E100
S
Stainless steel
12.5 mm
250 cm
E125
S
Stainless steel
15.0 mm
250 cm
E150
S
*S = IN STOCK O= ORDER PRODUCT
PLEASE FIND READY-MADE EXPANSION JOINT PROFILES ON PAGE 26!
11
12 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
STAIR EDGE PROFILES FOR HARD USE IN PUBLIC PREMISES DionePro stair edge profiles are an impressive solution for public premises. They are well suited to shopping centres, airports, hotels, offices, hospitals, and stairways in other public premises, for example. Another option is a stair edge profile with LEDs fit for cinemas and restaurants, for example.
STAINLESS STEEL STAIR EDGE PROFILES Different roughening options for stair edge profiles reduce the risk of slipping in the stairways of public premises. Width/type
Length
Product code
S/O
35 x 25 mm, smooth surface
300 cm
7352505-R
S
40 x 25 mm, embossed surface
250 cm
7352605-R
S
42.5 x 23.5 mm, grooved surface
300 cm
7523105-R
S
50 x 30 mm, embossed surface
250 cm
7352705-R
S
80 x 30 mm, embossed surface
250 cm
7352805-R
S
*S = IN STOCK O= ORDER PRODUCT
Smooth surface
Embossed surface
Grooved surface
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
MOUNTING OF STAIR EDGE PROFILES WITH ANTISLIP INSERTS IN PUBLIC PREMISES The profiles are attached to stairsteps with assembly glue. They can also be mounted with screws through countersank holes drilled in the profile at the installation stage. Screwheads are covered with caps (delivered with profiles in accordance with your order).
POLISHED BRASS STAIR EDGE PROFILES WITH ANTISLIP INSERTS Stair edge/type
Length
Product code
S/O
62.5 x 29 mm, polished brass
300 cm
BC1-25 18
O
56 x 50 mm, polished brass
300 cm
LR1-25 19
O
52.5 x 29 mm, polished brass
300 cm
MC1-25 06
O
*S = IN STOCK O= ORDER PRODUCT
Available with black or brown antislip inserts. Order codes for colours: black 01, brown 11.
BC1-25 18
LR1-25 19
MC1-25 06
13
14 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
STAIR EDGE PROFILES MADE OF BRUSHED ALUMINIUM
Width/type
Length
Product code
S/O
87.5 x 45 mm, brushed aluminium
300 cm
E2-25 10
O
87.5 x 28.5 mm, brushed aluminium
300 cm
C2-25 09
O
52.5 x 35 mm, brushed aluminium
300 cm
D1-25 11
O
54 x 30 mm, brushed aluminium
300 cm
M1-25 15
O
56.5 x 51 mm, brushed aluminium
300 cm
R1-25 14
O
55 x 40 mm, brushed aluminium
300 cm
T1-25 16
O
51.5 x 50 mm, brushed aluminium
300 cm
E1-25 08
O
61 x 50 mm, brushed aluminium
300 cm
F1-25 07
O
67 x 27 mm, brushed aluminium
300 cm
B1 25 06
O
*S = IN STOCK O= ORDER PRODUCT
Stair edge profiles can be provided with black or brown antislip inserts. Order codes for colours: black 01, brown 11.
E2-25 10
C2-25 09
R1-25 14
D1-25 11
T1-25 16
F1-25 07
M1-25 15
E1-25 08
B1-25 00 07
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
STAIR EDGE PROFILES MADE OF SILVER-ANODISED ALUMINIUM
Stair edge/type
Length
Product code
S/O
67 x 27 mm, silver-anodised aluminium
300 cm
B1-25 00 07
O
*S = IN STOCK O= ORDER PRODUCT
Made of silver-anodised aluminium. Colour options for antislip inserts: black, grey, brown, blue, red, yellow and green.
STAIR EDGE PROFILES WITH LEDS The stair edge profiles with LEDs are excellently suited to cinemas and restaurants, for example. Their antislip inserts and frames are black in colour. Colour options for the transparent plastic casing: colourless, blue or red. The LEDs are located at intervals of 5, 10 or 20 cm. Delivered with a transformer to be connected to the network. Separate end pieces are available for the profiles.
Stair edge/type
Length
Product code
S/O
77 x 41.5 mm, stair edge profile with LEDs
300 cm
BAL7-05 04 98
O
92 x 41.5 mm, stair edge profile with LEDs
300 cm
BAL7B-05 01 98
O
*S = IN STOCK O= ORDER PRODUCT
BC1-25 18
LR1-25 19
15
16 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
STAIR EDGE PROFILES MADE OF UNTREATED ALUMINIUM Stair edge/type
Length
Product code
S/O
100 x 32 mm, untreated aluminium
300 cm
8T-22 02 40
O
78 x 33 mm, untreated aluminium
300 cm
7T-22 09 40
O
*S = IN STOCK O= ORDER PRODUCT
8T-22 02 40
7T-22 09 40
ELY HARD M E R T X E R FO TEAR WEAR AND
STAINLESS STEEL STAIR EDGE PROFILE S= 4.5 mm
B3-24 04 99
Mounting with screws or separate casting fasteners directly on the casting is possible.
Stair edge/type
Length
Product code
S/O
55 x 40 mm, stainless steel
250 cm
B3-24 04 99
O
*S = IN STOCK O= ORDER PRODUCT
Fit for extremely hard terminal use, such as in the corners of the most frequently used stairways at underground stations.
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
17
TREDSAFE-ANTISLIP STAIR EDGE PROFILES - safety is vital to us and the end result has never looked so good as this!
CT
ODU NEW PR
Slipping on the stairs is very common and its consequences are all too often serious. New Tredsafe antislip stair edge profiles prevent people from slipping very efficiently. The antislip inserts are made of highly durable polyurethane-coated quartz/vinyl compound. The pyramidal antislip surface rules slipping out in every direction at an angle of 360 degrees, ensuring that every step taken is safe. As the surface structure removes water efficiently, it is the only safe antislip solution that functions well in wet conditions as well. Stair edge profiles, thickness 2 mm
AA109
AA115
AA114
AA113
AA116
AA201
AA202
AA203
AA205
AA204
AA206
18 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
AA 122
AA 125 Stair edge profiles for textile carpets, thickness 3.7 mm
AA 207 Stair edge profiles for textile carpets, thickness 5 mm:
AA345
AA123
Stair edge profiles for tiles, thickness 12 mm:
Tredsafe profiles provide ideal protection against slipping in indoor and outdoor areas! In addition to 20 antislip colour options, the selection includes very impressive self-luminous antislip inserts. The Tredsafe profiles have a silver-anodised coating, which makes them well suited to public premises.
Coal-black
Neutral black
Burgundy/brown
White
Blue
Bright blue
Jade green
Bright green
Brown
Medium grey
Burgundy/red
Yellow
The Tredsafe stair edge profiles are designed The antislip inserts with orange/ for challenging premises that set special black safety colours are designed requirements for finish and safety: to offer the best possible visibility across the edge of the step. • hotels • shopping centres • airports • hospitals • public means of transport • theatres • homes
A perfect safety solution for busses, trains and trams that call for the best possible antislip ability and have steps that must be discerned as clearly as possible. Helps visually disabled and elderly people discern the edge of the step.
Putty
Light grey
Antislip insert with safety colouring
www.dionepro.fi
STAIR EDGE PROFILES WITH SELF-LUMINOUS ANTISLIPS
PROFILES FOR PUBLIC PREMISES
19
CT
RODU P W E N
The self-luminous antislip inserts are as safe and durable as the Tredsafe profiles. There are two options to choose from in antislip products: entirely self-luminous antislips and antislips with a self-luminous front edge. They are made with the latest phosphorous technology and illuminate no less than ten times longer in the dark, as compared with previous self-luminous guide models. Applications include all challenging objects in public premises that require additional illumination in the stairways in case of emergency.
The quartz/vinyl antislip inserts are coated with polypropene. The Super Night Glow self-luminous antislip inserts developed in Japan illuminate ten times longer than normal self-luminous pigments!
Examples of reference projects: Object
Product
Quantity
Product code
Village Cinema, Singapore
Putty Zebron
980 m
AA123
Village Cinema, Singapore
Black Zebron
450 m
AA123
Waikato Hospital, New Zealand
Black Zebron
350 m
AA201
Otago Stadium, New Zealand
Yellow with safety yellow insert
3,500 m
UP117
Paris Stadium, France
Light Grey Insert
8,000 m
AA122
ACC Housing, New Zealand
Super Night Glow Insert
500 homes
AA139
*S = IN STOCK O= ORDER PRODUCT
White
Bright green
Jade green
Putty
Brown
Reddish-brown
Burgundy/red
Neutral black
Coal-black
Medium grey
Light grey
Blue
Bright blue
Yellow
All profile models displayed on page 17 and 18 can be provided with self-luminous antislip inserts. Fluorising
20 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
TILING PROFILES Tiling profiles protect outer tiling corners, keep them cleaner and cover tiling edges. The tiling profiles save time and make tiling work easier. Material: made of stainless steel suitable for public premises. Installation: the profile is pressed on the mounting mortar when outer corner tiles are installed. Cutting: profiles are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles can be shortened with a hacksaw. Applications: offices, hotels, schools, shopping centres and outer tiling corners in other public premises. Width/type
Length
Product code
S/O
Stainless steel H=6 mm
250 cm (300 cm)
6530-RST (58100)
S/O
Stainless steel H=6 mm, ground
250 cm (300 cm)
54116 (58100)
O
Stainless steel H=6 mm, glossy
250 cm (300 cm)
54130 (58130)
O
Stainless steel H=8 mm
250 cm (300 cm)
6534-RST (58200)
S/O
Stainless steel H=8 mm, ground
250 cm (300 cm)
54216 (58216)
O
Stainless steel H=8 mm, glossy
250 cm (300 cm)
54230 (58230)
O
Stainless steel H=10 mm
250 cm (300 cm)
6535-RST (58300)
S
Stainless steel H=10 mm, ground
250 cm (300 cm)
6535-RST HI (58316)
S/O
Stainless steel H=10 mm, glossy
250 cm (300 cm)
54330 (58330)
O
Stainless steel H=11 mm
250 cm (300 cm)
54350 (58350)
O
Stainless steel H=11 mm, ground
250 cm (300 cm)
54516 (58516)
O
Stainless steel H=11 mm, glossy
250 cm (300 cm)
54360 (58360)
O
Stainless steel H=12.5 mm
250 cm (300 cm)
6570-RST (58400)
S/O
Stainless steel H=12.5 mm, ground
250 cm (300 cm)
54416 (58416)
O
Stainless steel H=12.5 mm, glossy
250 cm (300 cm)
54430 (58430)
O
Stainless steel H=15 mm
250 cm (300 cm)
54500 (58500)
O
Inner corner for 6535 profile, type 6535-IC
6535-IC
S
Outer corner for 6535 profile, type 6535-OC
6535-OC
S
Round model
Order products (O) are delivered in full consignments of 10 pcs.
Round model
Outer and inner corner pieces are available on order to nearly all models! Please consult our sales department for additional information.
Square model Stainless steel H=8 mm, glossy
250 cm
6550
S
Stainless steel H=8 mm, ground
250 cm
14245
O
Stainless steel H=10 mm, glossy
250 cm
6555
S
Stainless steel H=10 mm, ground
250 cm
14365
O
Stainless steel H=12.5 mm, glossy
250 cm
6560
S
Stainless steel H=12.5 mm, ground
250 cm
14465
O
Stainless steel H=15 mm, glossy
250 cm
6565
S
Stainless steel H=22 mm, glossy
250 cm
526808
O
250 cm
E 20-10
S
Square model
Square model for hard use Stainless steel H=10 mm
Coloured aluminium, round model White H=6 mm
250 cm (300 cm)
53110 (57110)
O
White H=8 mm
250 cm (300 cm)
53210 (57210)
O
White H=10 mm
250 cm (300 cm)
53310 (57310)
O
White H=12.5 mm
250 cm (300 cm)
53415 (57410)
O
White H=15 mm
250 cm (300 cm)
53510 (57510)
O
Light grey H=6 mm
250 cm (300 cm)
53140 (57140)
O
Light grey H=8 mm
250 cm (300 cm)
53240 (57240)
O
Light grey H=10 mm
250 cm (300 cm)
53340 (57340)
O
*S = IN STOCK O= ORDER PRODUCT
Coloured model
Round tiling profiles come in lengths of 250 and 300 cm. (The code in brackets is for the length of 300 cm).
www.dionepro.fi
TILING STAIR EDGE PROFILES Rubber-rimmed stair edge profiles prevent people from slipping in the stairways. Width/type
Length
Product code
S/O
Beige, H=8 mm
250 cm (300 cm)
80220 (89220)
O
Beige, H=11 mm
250 cm (300 cm)
80420 (89420)
O
Beige, H=12 mm
250 cm (300 cm)
80620 (89620)
O
Brown, H=8 mm
250 cm (300 cm)
80250 (89250)
O
Brown, H=11 mm
250 cm (300 cm)
80450 (89450)
O
Brown, H=12 mm
250 cm (300 cm)
80650 (89650)
O
Grey, H=8 mm
250 cm (300 cm)
80240 (89240)
O
Grey, H=11 mm
250 cm (300 cm)
6590-harmaa (89440)
S/O
Grey, H=12 mm
250 cm (300 cm)
80640 (89640)
O
Black, H=8 mm
250 cm (300 cm)
80230 (89230)
O
Black, H=11 mm
250 cm (300 cm)
6590-black (89440)
S/O
Black, H=12 mm
250 cm (300 cm)
80630 (89630)
O
*S = IN STOCK O= ORDER PRODUCT
Order products (O) are sold in full consignments of 10 pcs. The code in brackets is for the length of 300 cm.
TILING EDGE TRIMS Width/type
Length
Product code
S/O
Stainless steel, bright, H=8 mm
250 cm (300 cm)
54600 (58600)
O
Stainless steel, brushed, H=8 mm
250 cm (300 cm)
54615 (58615)
O
Stainless steel, bright, H=10 mm
250 cm (300 cm)
54700 (58700)
O
Stainless steel, brushed, H=10 mm
250 cm (300 cm)
54715 (58715)
O
Stainless steel, bright, H=12 mm
250 cm (300 cm)
54800 (58800)
O
Stainless steel, brushed, H=12 mm
250 cm (300 cm)
54815 (58815)
O
*S = IN STOCK O= ORDER PRODUCT
PROFILES FOR PUBLIC PREMISES
DUCT
RO NEW P
21
22 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
STAINLESS STEEL CORNER PROFILES Material: made of bright annealed or ground stainless steel suitable for public premises. Material thickness 1.0 mm. Fastening: profiles are fastened with Elasticfix tape. The profile's pre-installed adhesive tape saves installation time and the costs. The backing of the adhesive tape is removed and the profile is pressed in place. If the outer corner is not straight, glue must be used as an additional reinforcement. Width/type
Length
DENTS T S N I A CT AG PROTE D TEAR N A R A E AND W
Cutting: profiles are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles can be cut with a hacksaw. Applications:offices, hotels, schools, shopping centres and outer corners in other public premises. Other materials: Corner protection profiles, size 30 x 30 mm, are also available in aluminium (colours: silver-anodised, white, beech, cherry, light cherry, oak, wenge and walnut).
Product code
S/O
20 x 20 mm, ground surface
270 cm
B20 RST 270
S
20 x 20 mm, bright annealed surface
300 cm
7300135
S
30 x 30 mm, ground surface
90 cm
B8 RST 90
S
30 x 30 mm, ground surface
270 cm
B8 RST 270
S
30 x 30 mm, aluminium/stainless steel
270 cm
B8 AS 270
S
30 x 30 mm, ground surface
300 cm
7303335
S
30 x 30 mm, bright annealed surface
300 cm
7301135
S
40 x 40 mm, ground surface
300 cm
7300000
O
40 x 40 mm, bright annealed surface
300 cm
7300002
O
50 x 50 mm, ground surface
270 cm
B9 RST 270
S
50 x 50 mm, ground surface
300 cm
7333335
S
50 x 50 mm, bright annealed surface
300 cm
7311135
S
60 x 60 mm, ground surface
300 cm
7300003
O
60 x 60 mm, bright annealed surface
300 cm
7300004
O
80 x 80 mm, ground surface
300 cm
7300005
O
80 x 80 mm, bright annealed surface
300 cm
7300006
O
100 x 100 mm, ground surface
300 cm
7300007
O
100 x 100 mm, bright annealed surface
300 cm
7300008
O
*S = IN STOCK O= ORDER PRODUCT
ALUMINIUM CORNER PROTECTION PROFILES Material: stove-enamelled, anodised or wood imitation coated aluminium. Profile length: 300 cm (wood imitation coated: 270 cm). Fastening: profiles are fastened with Elasticfix tape. The profile's pre-installed adhesive tape saves installation time and the costs. The backing of the adhesive tape is removed and the profile is pressed in place. If the outer corner is not straight, glue must be used as an additional reinforcement. Cutting: profiles are shortened with a hacksaw or circular saw. Applications: offices, hotels, schools, shopping centres and outer corners in other public premises. Width/type
Length
Product code
S/O
30 x 30 mm, oak
270 cm
B8 TA 270
S
30 x 30 mm, beech
270 cm
B8 PY 270
S
30 x 30 mm, walnut
270 cm
B8 PH 270
S
30 x 30 mm, cherry
270 cm
B8 KI 270
S
30 x 30 mm, light cherry
270 cm
B8 VKI 270
S
30 x 30 mm, wenge
270 cm
B8 WE 270
S
30 x 30 mm, white
300 cm
7303031-W
S
30 x 30 mm, silver-anodised
300 cm
7303032
S
*S = IN STOCK O= ORDER PRODUCT
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
METAL SKIRTINGS Metal skirtings are an inexpensive and easy option for ground stainless steel profiles. Elegant column collar skirtings are made to order from L-shaped skirtings.
Material: made of stainless steel or aluminium suitable for public premises. Installation: profiles are fastened with glue, mounting clips or bottom profiles. Cutting: profiles are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles and aluminium skirtings can be shortened with a hacksaw. Applications: offices, hotels, schools, shopping centres and objects in other public premises.
Width/type
Length
Product code
S/O
40 x 10 mm, L model, ground stainless steel
300 cm
JL RST 40 Hi 0.8
S
60 x 10 mm, L model, ground stainless steel
300 cm
JL RST 60 Hi 0.8
S
40 x 10 mm, clip-mounted model, ground stainless steel
300 cm
JL RST 40-JOHTO
S
Outside corner for JL RST 40-JOHTO profile
RST -Johto U-Kulma
S
End piece, left, for JL RST 40-JOHTO profile
RST-Johto V-p채채ty
S
End piece, left, for JL RST 40-JOHTO profile
RST-Johto O-p채채ty
S
Stainless steel
ALUMINIUM 40 x 12 mm, LJ model, silver-anodised
300 cm
JL SI 40
S
40 x 12 mm, LJ model, stainless steel anodised
300 cm
JL AS 40
S
40 x 12 mm, LJ model, graphite-anodised
300 cm
JL NG 40
S
60 x 12 mm, LJ model, silver-anodised
300 cm
JL SI 60
S
60 x 12 mm, LJ model, stainless steel anodised
300 cm
JL AS 60
S
60 x 12 mm, LJ model, graphite-anodised
300 cm
JL NG 60
S
45 x 16 mm, beam model, silver-anodised
250 cm
CS1 SI 250
S
45 x 16 mm, beam model, white
250 cm
CS1 WH 250
S
60 x 16 mm, beam model, silver-anodised
250 cm
CS2 SI 250
S
60 x 16 mm, beam model, white
250 cm
SC2 WH 250
S
*S = IN STOCK O= ORDER PRODUCT
Aluminium, beam model
L model, stainless steel
Clip-mounted model, stainless steel
Aluminium, LJ model
23
24 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
COLUMN COLLARS Material: made of stainless steel or brass suitable for public premises. Always manufactured on order in accordance with the reported diameter. Material thickness 0.8 mm or 1.5 mm. Cutting:the assembly margin of the other half is shortened to size accurately by using a hacksaw, or a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. Installation: profiles are fastened with glue using a tightening line. Applications: offices, hotels, schools, shopping centres and objects in other public premises.
2-part and 4-part column collars
Width/type
Product code
S/O
more than 200 mm, height: 40–150 mm, ground stainless steel, 2-part
JLRST 300 *
O
more than 200 mm, height: 40–150 mm, ground brass, 2-part
JLMS 300 *
O
less than 200 mm, height: 40–150 mm, ground stainless steel, 4-part
JLRST 200 *
O
less than 200 mm, height: 40–150 mm, ground brass, 4-part
JLMS 200 *
O
*Accurate height and diameter dimensions must be notified when ordering the products. The width of the bottom flange in the two-part collar is always 10 mm but 15–40 mm in the 4-part collar at the customer's option.
*S = IN STOCK O= ORDER PRODUCT
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
CURVED PROFILES Curved cover strips are used in points where the floor surface material changes to provide the floor with impressive details. Regular curves are bent in accordance with a radius. If the radius is irregular, an accurate model must be prepared and the strip bent in accordance with it. Material: made of ground stainless steel or brass suitable for public premises. Material thickness 1.5 mm. Bending a variety of extruded brass profiles to a curve is also possible. Consult our sales department for more information about the bending of profiles. Fastening:countersunk holes are drilled to the profiles at the installation stage and the profiles are fastened with suitable screws. Cutting: both ends of all profiles have a 10 cm unbent section that is shortened from the most suitable point before fastening the profiles. The profiles are shortened with a hacksaw or a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder.
The minimum bending radii for cover strips to be bent*
S/O
GROUND BRASS or STAINLESS STEEL Profile width 30 mm - minimum bending radius R=300
O
Profile width 40 mm - minimum bending radius R=500
O
Profile width 50 mm - minimum bending radius R=15000
O
EXTRUDED BRASS Profile width 30 mm - minimum bending radius R=300
O
Profile width 40 mm - minimum bending radius R=1500
O
Profile width 50 mm - minimum bending radius R=15000
O
*The minimum radii for edge and stair edge profiles vary case by case. Please consult our sales department for additional information!
Applications: offices, hotels, schools, shopping centres and objects in other public premises. In addition to standard profiles, we make a number of custom-made profiles, such as bathroom thresholds, inside and outside corner protection profiles with different angles, as well as cover strips and skirtings of different size and design.
CUSTOM-MADE PRODUCTS Custom-made thresholds
Custom-made corner protection profiles
Custom-made cover strips and skirtings
Material: made of ground or glossy steel or brass suitable for public premises. Edge grinding: grinding profile edges at the manufacturing stage removes the sharp edges caused by the cutting of profiles. Examples: in addition to standard profiles, we make a wide variety of custom-made profiles, such as bathroom thresholds, inside and outside corner strips with different angles, and cover strips and skirtings of different size and design. Cutting:profiles are cut with a hacksaw or shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. Applications: offices, hotels, schools, shopping centres and objects in other public premises.
25
26 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
EXPANSION JOINT PROFILES FOR FLOORING MATERIALS The expansion joint profile covers the expansion joint between two floorings. Material: made of stainless steel suitable for public premises. Installation:profiles are mounted in connection with installation at the point where the expansion joint is. Cutting: profiles are shortened with a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. A small number of profiles can be shortened with a hacksaw. Applications: offices, hotels, schools, shopping centres and flooring expansion joints in other public premises.
Width/type
Length
Product code
S/O
Width/type
Length
Product code
S/O
Flooring expansion joint, L model H=3 mm
250 cm
E 30
S
LL1 Grey
300 cm
0393023
O
Flooring expansion joint, L model H=4.5 mm
250 cm
E 45
S
LL1 Black
300 cm
0393009
O
Flooring expansion joint, L model H=6 mm
250 cm
E 60
S
LL2 Grey
300 cm
0346029
O
Flooring expansion joint, L model H=8 mm
250 cm
E 80
S
LL2 Black
300 cm
0346005
O
Flooring expansion joint, L model H=10 mm
250 cm
E 100
S
LL3 Grey
300 cm
0393320
O
Flooring expansion joint, L model H=12.5 mm
250 cm
E 125
S
LL4 Grey
300 cm
0342427
O
Flooring expansion joint, L model H=15 mm
250 cm
E 150
S
LL5 Grey
300 cm
0315025
O
Ready-made expansion joint profile with a rubber, H=10 mm, aluminium
250 cm
LS 100 AL GREY
S
LL6 Grey
300 cm
0316022
O
Ready-made expansion joint profile with a rubber, H=8 mm, stainless steel
250 cm
LS 80 RST GREY
O
Ready-made expansion joint profile with a rubber, H=10 mm, stainless steel
250 cm
LS 100 RST GREY
O
Ready-made expansion joint profile with a rubber, H=12.5 mm, stainless steel
250 cm
LS 125 RST GREY
O
*S = IN STOCK O= ORDER PRODUCT
*S = IN STOCK O= ORDER PRODUCT
Expansion joint profile, aluminium
Expansion joint profile, stainless steel
Expansion joint profile LL2
Expansion joint profile LL3
Expansion joint profile LL4
Expansion joint profile LL5
Expansion joint profile LL6
Expansion joint profile, L model
Expansion joint profile LL1
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
STRUCTURAL EXPANSION JOINT PROFILES Providing the expansion joint between surface casting and flooring with one profile only saves time and costs. The use of expansion joint profiles makes it possible to avoid expensive expansion joint repairs under warranty and provide the flooring with an impressive looking expansion joint. Model
Clearance
Cover width
Structural width
Total height
Structural expansion joint width, max
BS 2 5000 1
14 mm (-7 mm, +7 mm)
55 mm
40 mm
190 mm
55 mm
GTA-N 2 1022 1
10 mm (-5 mm, +5 mm)
75 mm
22 mm
200 mm
50 mm
GTA-N 2 1040 1
10 mm (-5 mm, +5 mm)
approx. 75 mm
40 mm
200 mm
50 mm
EX
10 mm (-5 mm, +5 mm)
30 mm
84 mm
acc. to need*
50 mm
*to be specified within 30–100 mm
EX Load endurance: light lorries with a maximum total weight of 3 tons. Unsuitable for premises where hard-wheeled pallet jacks are used. Material: ground stainless steel (S= 1.0 mm). The seal is made of flexible and durable plastic. Seal colours:grey and black. Also available with an oil-proof nitrite rubber. Length 3 m. Installation: a bed of mortar is spread on both sides under the expansion joint profile to make it possible to adjust the final height of the profile's upper edge. The profile is pressed on the mortar bed. After the mortar bed has hardened, the profile is mounted on the floor with bolts at intervals of 40 cm. The surface mortar's upper edge is left as much below the profile's top edge as the surface material requires so that the final surface material is flush with the profile's edge. Applications:expansion joints of floor structures in points that require an impressive looking expansion joint profile placed at exactly the correct height. GTA -N Material and load endurance: frame is totally made of extruded aluminium. Withstands the load generated by light vans with a total weight of 1.5 tons. In addition, it withstands the load generated by shopping trolleys (the maximum weight of trolleys with plastic wheels is 500 kg). Not recommended for points where pallet jacks are used. Installation: a bed of mortar is spread on both sides under the expansion joint profile to make it possible to adjust the final height of the profile's upper edge. The profile is pressed on the mortar bed. After the mortar bed has hardened, the profile is mounted on the floor with bolts at intervals of 40 cm. The surface mortar's upper edge is left as much below the profile's top edge as the surface material requires so that the final surface material is flush with the profile's edge. Applications: expansion joints of floor structures in shopping centres and other objects subject to hard wear and tear. BS Material and load endurance: frame is made of extruded aluminium. The seal is made of flexible and durable plastic. Seal colours: light grey, black and brown. Length 5 m. Withstands the load generated by light lorries with a maximum total weight of 3 tons. Unsuitable for premises where hard-wheeled pallet jacks are used. Installation:a bed of mortar is spread on both sides under the expansion joint profile to make it possible to adjust the final height of the profile's upper edge. The profile is pressed on the mortar bed. After the mortar bed has hardened, the profile is mounted on the floor with bolts at intervals of 40 cm. The surface mortar's upper edge is left as much below the profile's upper edge as the surface material requires so that the final surface material is flush with the profile's edge. Applications: expansion joints of floor structures. The profile is provided with a large clearance and its structure is durable.
27
28 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
Model
Clearance
Cover width
Total width
Structural height
Max. structural expansion joint width
RO 2 0500 2
6 mm (-3 mm, +3 mm)
65 mm
155 mm
40 or 50 mm
50 mm
S/O O
RO 2 0800 2
10 mm (-5 mm, +5 mm)
85 mm
175 mm
40 or 50 mm
80 mm
O
RO 2 1000 2
15 mm (-7.5 mm, +7.5 mm)
105 mm
195 mm
40 or 50 mm
100 mm
O
TBG 2 5030 4
8 mm (-4 mm, +4 mm)
42 mm
110 mm
20 mm
30 mm
O
TBG 2 5035 4
8 mm (-4 mm, +4 mm)
42 mm
110 mm
35 mm
30 mm
O
BL 2 2900 1
10 mm (-5 mm, +5 mm)
28 mm
125 mm
40 mm
30 mm
O
*S = IN STOCK O= ORDER PRODUCT
RO Material and load endurance: thick aluminium profile, withstands the load generated by lorries, industrial trucks and pallet jacks. Installation:both profile edges must be mounted on the floor with epoxide resin across the width of 100 mm to allow the profile to remain in place in hard use. The profile is efficiently pressed onto epoxide resin and the substance is allowed to harden entirely. The height of the flooring and the casting must be taken into account at the installation stage to enable the profile surface to be mounted flush with the flooring. Then the profile is fastened in place with at least 10 mm stress-resistant bolts at intervals of 300 mm. Applications: expansion joints of the floors in shops, fair centres, warehouses and airports. Withstands heavy use and suitable for challenging objects in public premises. TBG Material and load endurance: aluminium profile, withstands the load generated by passenger cars, industrial trucks and light lorries with a maximum total weight of 3 tons and the wheel diameter of 300 mm. Installation: a mortar bed with a width of about 10 cm is spread on both sides of the expansion joints. The thickness of the mortar bed determines the final height of the profile. The profile is pressed on the mortar. After the mortar has hardened, horizontal profile sections are mounted in place with bolts at intervals of about 30 cm. Applications: Industrial premises and parking halls.
BL Material and load endurance: the aluminium profile withstands the load generated by passenger cars and light lorries with a maximum total weight of 3 tons. Unsuitable flooring material for objects where industrial trucks or pallet jacks are used. Installation:a mortar bed with a width of about 10 cm is spread on both sides of the expansion joints. The thickness of the mortar bed determines the final height of the profile. The profile is pressed on the mortar. After the mortar has hardened, horizontal sections of the profile are mounted in place with bolts at intervals of about 40 cm. Applications: offices and public buildings.
www.dionepro.fi
ENTRANCE CARPETS WITH ALUMINIUM FRAME
29
ENTRANCE CARPETS WITH DUCT O R ALUMINIUM P NEW FRAME The first impression of the whole building depends on its vestibule. A modern and quality entrance carpet in the vestibule provides the building with an up-to-date look, saves cleaning costs and extends the life of the surrounding floor. Sturdy and long-lasting aluminium-frame vestibule carpet with high-quality and durable bristles. Is durable and retains its shape when rolled up for cleaning. Long-lasting, shape-retaining and soil-repellent bristles are made of the best possible raw materials. The rubber pieces attached to the aluminium rails attenuate noise and efficiently keep the carpet in place. Our carpets conform to fire resistance standards EN 11925-2 and EN 9239-1. Made to order. Several colour alternatives available for each surface option. Cut-to-shape carpets are also available. Please consult our sales department for additional information. Surface options:
Grooved rubber
Rough fibre ribbon
Bristle
30 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
www.dionepro.fi
PROFILES FOR PUBLIC PREMISES
INSPECTION AND ACCESS HATCHES The DionePro access covers on the floor offer a number of significant benefits. The product set durability is ensured with load endurance certification and quality control. Water and gas-proof hatches are safe and enable their installation in challenging applications as well. The fire protection system of DionePro hatches ensures a 90-minute fire endurance time, for instance, for the BV-F90 hatch in accordance with the official IBS fire-endurance test. Durable and high-quality opening handles, locking mechanisms, spring systems and corner shapes emphasise the user-friendliness and strong quality of our inspection and access hatches.
31
32 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
WALL AND CEILING COVER PLATES DionePro cover plates can be mounted on the walls or ceilings. Steel covers are white-painted and glossy. Cover plates are protected against scratching with a transparent protective film. The film is easy to detach at the installation stage.
- Rounded and trimmed edges - Mounting holes in corners, diameter 4 mm - Colour: matt white
COVER PLATES Model
Size (mm)
PL 140
200 x 200 x 0.8 mm
PL 200
260 x 260 x 0.8 mm
PL 300 PL 400 PL 500
Thickness (mm)
Colour
Weight (kg)
0.8 mm
White
0.8 mm
White
360 x 360 x 0.8 mm
0.8 mm
460 x 460 x 0.8 mm
0.8 mm
560 x 560 x 0.8 mm
0.8 mm
*S = IN STOCK O= ORDER PRODUCT
Package size
S/O
0.26 kg
10
S
0.45 kg
10
S
White
0.88 kg
5
S
White
1.40 kg
5
S
White
2.00 kg
5
S
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
33
NEW INSPECTION DOOR SET DESIGNED FOR WALLS AND DUCT O R P W NE CEILINGS Our DionePro hatch selection includes new inspection door options designed for walls and ceilings. Four models with different properties are available and come in several sizes. Basic steel-made wall-mounted inspection doors with white surface painting differ from the options on the market due to their new round edge design. They are best suited to conspicuous locations in which the highest possible requirements are set for the hatch appearance and finish. The selection includes impressive, thermally insulated inspection doors made of ground aluminium as well. Other models include inspection doors that are made of steel, primed white and fire-proof, or inspection doors that are fire-proof and thermally insulated.
Illustrations: 1. Steel inspection door with round edges (left top edge), 2. Thermally insulated aluminium inspection door (right top edge) 3. Fire-proof steel inspection door (left bottom edge) 4. Fire-proof thermally insulated inspection door (right bottom edge).
34 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
THERMALLY INSULATED INSPECTION DOOR LT-314, LT-467 Applications • Suitable for all wall surfaces in indoor and outdoor use. Properties: • The cover is provided with a thermally insulated plate. • Concealed hinge Material: • Light-structured, untreated aluminium with brushed surface. • The frame is equipped with a seal. • The lock can be opened with a screwdriver. THERMALLY INSULATED INSPECTION DOORS Model
Type
Hatch size
Installation opening size
Weight
LT-314
Thermally insulated inspection door
305 x 305 mm
314 x 314 mm
1.8 kg
S
LT-467
Thermally insulated inspection door
457 x 457 mm
467 x 467 mm
2.7 kg
S
S = IN STOCK O= ORDER PRODUCT
INSPECTION DOOR Applications • Suitable for all wall and ceiling surfaces. Properties: • The seamless frame with round corners is made of one part only. • Concealed hinge Material • Galvanised steel with white surface painting. • The lock can be opened with a screwdriver.
INSPECTION DOORS Model
Hatch size
Installation opening size
Weight (kg)
S/O
UF-158
152 x 152 mm
157 x 157 mm
0.68 kg
S
UF-208
203 x 203 mm
208 x 208 mm
0.91 kg
S
UF-310
305 x 305 mm
310 x 310 mm
1.14 kg
S
UF-386
381 x 381 mm
386 x 386 mm
2.50 kg
S
UF-462
457 x 457 mm
462 x 462 mm
3.41 kg
S
UF-615
610 x 610 mm
615 x 615 mm
5.45 kg
S
S = IN STOCK O= ORDER PRODUCT
S/O
INSPECTION AND ACCESS HATCHES
www.dionepro.fi
FIRE-PROOF WALL HATCH FB-30890, FB-46090 Applications • Suitable for all wall surfaces in indoor and outdoor use. • Fire-proof on wall surfaces (90 min). Properties: • Cover provided with a 2.5 cm fire insulation. • Concealed hinge • Self-closing and locking (equipped with a spring). Material: • White, primed steel • Lockable with a key and openable with a separate fixed opening knob attached to the hatch. • Locking is openable also from inside. FIRE HATCHES Model
Type
Hatch size
Installation opening size
Weight
Fire endurance
S/O
FB-30890
Fire-insulated wall-mounted inspection door
305 x 305 mm
308 x 308 mm
3.8 kg
90 min
S
FB-46090
Fire-insulated wall-mounted inspection door
457 x 457 mm
460 x 460 mm
6.5 kg
90 min
S
S = IN STOCK O= ORDER PRODUCT
FIRE-PROOF WALL-MOUNTED INSPECTION DOOR WITH THERMAL INSULATION FW-30890, FW-46090 Applications • Suitable for all wall and ceiling surfaces. • Fire-proof on wall surfaces (90 min), fire-retardant on ceiling surfaces. Properties: • Cover provided with a 5 cm fire-proof thermal insulation. • Concealed hinge • Self-closing and locking (equipped with a spring). Material: • White, primed steel • Lockable with a key or openable with a separate fixed opening knob attached to the hatch. • Locking is openable also from inside.
FIRE HATCHES Model
Type
Hatch size
Installation opening size
Weight
Fire endurance
FW-30890
Fire-proof inspection door with thermal insulation
305 x 305 mm
308 x 308 mm
4.8 kg
90 min
S
FW-46090
Fire-proof inspection door with thermal insulation
457 x 457 mm
460 x 460 mm
9.1 kg
90 min
S
S = IN STOCK O= ORDER PRODUCT
S/O
35
36 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
ACCESS COVERS DionePro access covers are gas and water-proof, precision-machined and easy to coat. The access covers come in many sizes and shapes. They are made of aluminium, or stainless and galvanised steel. Thanks to their patented opening mechanism, the manholes are easy to open. As DionePro access covers are gas and water-proof, they are best suited to inspection doors for well-ventilated base floors, also in radon areas. The access covers are also available as options lined up in rows and used in cable channels of passages, for example. When cast and coated, basic models withstand the weight of the passenger car. Access covers that withstand the weight generated by heavy vehicles are also available. Stainless steel manholes are suitable for hospitals and food production premises as well. The fire-endurance time of the cast and coated basic models is about 60 min. In addition, challenging objects can be provided with fire hatches with a fire-endurance time of 90 min.
GALVANISED STEEL The emergency hatch to be mounted on the balcony is provided with a ladder that can be released from inside the hatch, or without a ladder.
BALCONY HATCHES Model
Inner measure (cm)
Outer measure (cm)
Weight without ladder (kg)
PL 66
60 x 60 cm
78 x 78 cm
50 kg
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
BV STEEL ACCESS COVER GAS AND WATER-PROOF Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: manholes that must be gas and water-proof in indoor and outdoor use.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip The BV access cover, opened and lifting handles in place.
The BV access cover mounted on the cafĂŠ floor.
The cross-sectional drawing of the BV access cover
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BV 33
30 x 30
43.5 x 43.5
10 kg
S
BV 44
40 x 40
53.5 x 53.5
13 kg
S
BV 45
45 x 45
58.5 x 58.5
16 kg
S
BV 55
50 x 50
63.5 x 63.5
17 kg
S
BV 64
60 x 40
73.5 x 53.5
17 kg
S
BV 66
60 x 60
73.5 x 53.5
21 kg
S
BV 635
63.5 x 63.5
77.0 x 77.0
22 kg
S
BV 86
80 x 60
93.5 x 73.5
27 kg
S
BV 88
80 x 80
93.5 x 93.5
31 kg
S
BV 106
100 x 60
113.5 x 73.5
31 kg
S
BV 108
100 x 80
113.5 x 93.5
37 kg
S
BV 110
100 x 100
113.5 x 113.5
42 kg
S
*S = IN STOCK O= ORDER PRODUCT
The BV access cover partly covered with tiles.
37
38 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BV ALUMINIUM ACCESS COVER GAS AND WATER-PROOF Load endurance: 125 kN Material: the frame and cover are made of extruded aluminium, the base is made of aluminium plate. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. Water-proof even under the water pressure of 1000 mm. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access cover’s visible edge. The reinforcement in the access cover improves structural load endurance. Applications: gas and water-proof access cover located indoors when high requirements are set for the appearance of the access cover's visible edges or when the floor must be ground afterwards (e.g. parquet floors).
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Base plate 8. Corner welding 9. Frame
The cross-sectional drawing of the aluminium BV access cover
The aluminium BV access cover, opened in a textile carpet covered floor.
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BVA 22
20 x 20
32 x 32
3 kg
O
BVA 33
30 x 30
42 x 42
5 kg
O
BVA 44
40 x 40
52 x 52
7 kg
O
BVA 45
45 x 45
57 x 67
8 kg
O
BVA 55
50 x 50
62 x 62
9 kg
O
BVA 64
60 x 40
72 x 52
9 kg
O
BVA 66
60 x 60
72 x 72
10 kg
O
BVA 635
63.5 x 63.5
75.5 x 75.5
11 kg
O
BVA 77
70 x 70
82 x 82
12 kg
O
BVA 86
80 x 60
92 x 72
12 kg
O
BVA 88
80 x 80
92 x 92
15 kg
O
BVA 106
100 x 60
112 x 72
15 kg
O
BVA 108
100 x 80
112 x 92
21 kg
O
BVA 110
100 x 100
112 x 112
23 kg
O
Cover depth: 6.6 cm, total structural height: 7.6 cm *S = IN STOCK O= ORDER PRODUCT
The aluminium BV access cover, partly covered with tiles.
INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BVE STAINLESS STEEL ACCESS COVER GAS AND WATER-PROOF Load endurance: 125 kN Material: made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. Properties:gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. The reinforcement in the manhole improves structural load endurance. Applications: access cover that must be gas and water-proof, extremely corrosion-resistant or hygienic, such as those in food production premises or hospitals. Access cover made of acid-proof stainless steel (quality 316) are available on order.
The stainless steel BV access cover is suitable for food production premises, for example.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip The cross-sectional drawing of the stainless steel BV manhole
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BVE 33
30 x 30
43.5 x 43.5
9 kg
O
BVE 44
40 x 40
53.5 x 53.5
13 kg
O
BVE 45
45 x 45
58.5 x 58.5
17 kg
O
BVE 55
50 x 50
63.5 x 63.5
17 kg
O
BVE 64
60 x 40
73.5 x 53.5
16 kg
O
BVE 66
60 x 60
73.5 x 73.5
20 kg
O
BVE 86
80 x 60
93.5 x 73.5
24 kg
O
BVE 88
80 x 80
93.5 x 93.5
30 kg
O
BVE 106
100 x 60
113.5 x 73.5
29 kg
O
BVE 108
100 x 80
113.5 x 93.5
33 kg
O
BVE 110
100 x 100
113.5 x 113.5
40 kg
O
Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK O= ORDER PRODUCT
39
40 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
CLA ALUMINIUM ACCESS COVER, PREFILLED WITH A LIGHT COMPOSITE PLATE, WITH A SEAL Load endurance: 15 kN (walking-resistant). Material: the frame and cover edges are made of extruded aluminium, the base of aluminium plate. Properties: the access cover is well suited to 24 mm surface material at the maximum and prefilled with a light composite plate. The cover structure is lighter than in the manhole with a normal concrete filling. The access cover is gas and water-proof and manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access cover’s visible edge. Applications: access cover that must be gas and water-proof in indoor use. To ensure waterproofness, the section between the access cover’s outer edge and the surrounding floor must be insulated with water-proof insulation.
1. Frame 2. Cover 3. Seal 4. Locking bolt 5. Shield plug 6. Composite plate 7. Frame joint 8. Bolt thread 9. Frame
The cross-sectional drawing of the CLA access cover
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
CLA 22
20 x 20
32 x 32
3 kg
O
CLA 33
30 x 30
42 x 42
5 kg
O
CLA 44
40 x 40
52 x 52
7 kg
O
CLA 55
50 x 50
62 x 62
9 kg
O
CLA 64
60 x 40
72 x 52
9 kg
O
CLA 66
60 x 60
72 x 72
10 kg
O
CLA 86
80 x 60
92 x 72
12 kg
O
CLA 88
80 x 80
92 x 92
15 kg
O
CLA106
100 x 60
112 x 72
15 kg
O
Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK O= ORDER PRODUCT
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
41
CCA ALUMINIUM, HINGED, PREFILLED WITH A LIGHT COMPOSITE PLATE, WITH A SEAL Load endurance: 15 kN (walking-resistant). Material: the frame and cover edges are made of extruded aluminium, the base of aluminium plate. Properties: the access cover is well suited to 24 mm surface materials at the maximum and prefilled with a light composite plate. The cover structure is lighter than in the access cover with a normal concrete filling. The access cover is gas and water-proof and manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the manhole's visible edge. Applications: access cover that must be gas and water-proof in indoor use. To ensure waterproofness, the section between the access cover's outer edge and the surrounding floor must be insulated with water-proof insulation.
1. Frame 2. Cover 3. Seal 4. Locking bolt 5. Frame joint 6. Shield plug 7. Hinge 8. Frame joint 9. Frame 10. Support rod 11. Composite plate
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
CCA 55
50 x 50
62 x 64
10 kg
O
CCA 66
60 x 60
72 x 74
12 kg
O
CCA 86
80 x 60
92 x 74
14 kg
O
CCA 88
80 x 80
92 x 94
17 kg
O
CCA 106
100 x 60
112 x 74
17 kg
O
Cover depth: 6.6 cm, total structural height: 7.6 cm *S = IN STOCK O= ORDER PRODUCT
The support rod keeps the cover open when required.
A cross-sectional drawing of the hinged BV aluminium access cover.
The light, hinged access cover is easy to open.
42 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BV SHALLOW STEEL AND BVE SHALLOW STAINLESS STEEL ACCESS COVER GAS AND WATER-PROOF Load endurance: 15 kN (walking-resistant). Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The stainless steel product is made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. Properties: The manhole cover is manufactured with accurate dimensions. The cover's total height is only 5 cm. The access cover filled with a thinner surface casting is light to open. The reinforcement inside the manhole improves structural load endurance. Applications: access cover in indoor use.
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BV-shallow 22
20 x 20
33 x 33
5 kg
O
BV-shallow
30 x 30
43 x 43
8 kg
O
BV-shallow
40 x 40
53 x 53
12 kg
O
BV-shallow
50 x 50
63 x 63
15 kg
O
BV-shallow
60 x 40
73 x 53
15 kg
O
BV-shallow
60 x 60
73 x 73
19 kg
O
BV-shallow
80 x 60
93 x 73
24 kg
O
BV-shallow
80 x 80
93 x 93
28 kg
O
BV-shallow
100 x 60
103 x 73
27 kg
O
BVE-shallow
30 x 30
43 x 43
8 kg
O
BVE-shallow
40 x 40
53 x 53
12 kg
O
BVE-shallow
50 x 50
63 x 63
15 kg
O
BVE-shallow
60 x 40
73 x 53
15 kg
O
BVE-shallow
60 x 60
73 x 73
19 kg
O
BVE-shallow
80 x 60
93 x 73
24 kg
O
BVE-shallow
80 x 80
93 x 93
28 kg
O
BVE-shallow
100 x 60
103 x 73
27 kg
O
GALVANISED STEEL
The reinforced bottom side of the shallow BV access cover.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Reinforced bottom side
STAINLESS STEEL
Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK O= ORDER PRODUCT
The cross-sectional drawing of the shallow BV access cover.
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
BV-F90 STEEL ACCESS COVER GAS AND WATER-PROOF FIRE ENDURANCE OF 90 min Load endurance:125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The access cover is equipped with a fire-protection plate and a fire-resistant special seal. Properties: the fire-resistant, gas and water-proof access cover is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Fire-endurance class:the fire endurance time is 90 min after installation and coating. Suitable for objects with high fire safety requirements. The fire protection properties are verified with an official IBS fire-endurance test. Applications: access cover that must be gas and water-proof and require a high fire-endurance class in indoor and outdoor use.
1. Frame 2. Cover 3. Fire-proof seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Fire-retardant plate 9. Plate lifting ring 10. Fire-retardant plate's edge profile
The cross-sectional drawing of the fire-retardant access cover.
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BV-F90 33
30 x 30
43.5 x 43.5
13 kg
O
BV-F90 45
45 x 45
58.5 x 58.5
21 kg
O
BV-F90 55
50 x 50
63.5 x 63.5
23 kg
O
BV-F90 64
60 x 40
73.5 x 53.5
23 kg
O
BV-F90 66
60 x 60
73.5 x 73.5
30 kg
O
BV-F90 635
63.5 x 63.5
77.0 x 77.0
32 kg
O
BV-F90 86
80 x 60
93.5 x 73.5
38 kg
O
BV-F90 88
80 x 80
93.5 x 93.5
45 kg
O
BV-F90,106
100 x 60
113.5 x 73.5
45 kg
O
BV-F90,108
100 x 80
113.5 x 93.5
54 kg
O
BV-F90,110
100 x 100
113.5 x 113.5
63 kg
O
Cover depth: 6.6 cm, total structural height: 7.6 cm
*S = IN STOCK O= ORDER PRODUCT
43
44 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BVS-250 STEEL MANHOLE
FOR HEAVY VEHICLES GAS AND WATER-PROOF Load endurance: 250 kN Material: the frame and cover are made of a steel profile. The structure is galvanised after welding. The manhole is equipped with reinforcement beams to enable heavy use. Properties: gas and water-proof manhole which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. The reinforcement inside the manhole improves structural load endurance. Applications:warehouses and loading platforms where industrial trucks are used.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Reinforcement beam The cross-sectional drawing of the BVS-250 access cover The BVS-250 access cover’s bottom side is reinforced with I beams.
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BVS 250/44
40 x 40
53.5 x 53.5
17 kg
O
BVS 250/55
50 x 50
63.5 x 63.5
26 kg
O
BVS 250/64
60 x 40
73.5 x 73.5
25 kg
O
BVS 250/66
60 x 60
73.5 x 73.5
31 kg
O
BVS 250/88
80 x 80
93.5 x 93.5
52 kg
O
BVS 250/106
100 x 60
113.5 x 73.5
52 kg
O
BVS 250/110
100 x 100
113.5 x 113.5
78 kg
O
Cover depth: 5 cm, total structural height: 7.5 cm The structural height is increased with a 10 cm I beam placed at the bottom of the access cover.. *S = IN STOCK O= ORDER PRODUCT
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
BVS-400 STEEL ACCESS COVER
FOR HEAVY VEHICLES GAS AND WATER-PROOF Load endurance: 400 kN Material: the frame and cover are made of a steel profile. The structure is galvanised after welding. The access cover is equipped with reinforcement beams and the steel framework to enable heavy use. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: factories, warehouses, loading platforms and driving routes. Withstands the load generated by industrial trucks and heavy vehicles.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. The framework for reinforcement beams 9. Reinforcement beam
The BVS-400 access cover’s bottom side is reinforced with I beams and the framework.
The cross-sectional drawing of the BVA-400 access cover
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BVS 400/55
50 x 50
63.5 x 71.5
52 kg
O
BVS 400/64
60 x 40
73.5 x 61.5
50 kg
O
BVS 400/66
60 x 60
73.5 x 81.5
62 kg
O
BVS 400/88
80 x 80
93.5 x 101.5
103 kg
O
BVS 400/106
100 x 60
113.5 x 81.5
119 kg
O
BVS 400/110
100 x 100
113.5 x 121.5
175 kg
O
Cover depth: 5 cm, installation height: 18 cm (60 x 60-80 x 80) or 22 cm (100 x 100) *S = IN STOCK O= ORDER PRODUCT
45
46 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BV-GD STEEL ACCESS COVER WITH GAS SPRINGS AND BVE-GD STAINLESS STEEL ACCESS COVER WITH GAS SPRINGS GAS AND WATER-PROOF
Load endurance:125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The stainless steel product is made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. The access cover is provided with high-quality gas springs. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. Opening: gas springs that facilitate opening make it possible for one user to open the access cover without much effort. Applications: access cover that must be gas and water-proof in indoor and outdoor use. Ideal for locations where the access covermust be opened very often. Installation:gas springs are attached in place after the access cover has been installed and the concrete has hardened.
The cross-sectional drawing of the BVA-250 access
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Gas spring
cover Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
The number of springs
BV-GD 66
60 x 60
73.5 x 75.15
29 kg
O
1
BV-GD 86
80 x 60
93.5 x 75.15
36 kg
O
2
BV-GD 88
80 x 80
93.5 x 95.15
42 kg
O
2
BV-GD 106
100 x 60
113.5 x 75.15
40 kg
O
2
BV-GD 110
100 x 100
113.5 x 115.15
55 kg
O
2
BVE-GD 66
60 x 60
73.5 x 75.15
28 kg
O
1
BVE-GD 86
80 x 60
93.5 x 75.15
35 kg
O
2
BVE-GD 88
80 x 80
93.5 x 95.15
41 kg
O
2
BVE-GD 106
100 x 60
113.5 x 75.15
40 kg
O
2
BVE-GD 110
100 x 100
113.5 x 115.15
53 kg
O
2
GALVANISED STEEL
The BV-GD access cover, installed on a terrace.
STAINLESS STEEL
Cover depth: 5 cm, total structural height: 7.5 cm *S = IN STOCK O= ORDER PRODUCT
The bottom side of the BV-GD access cover..
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
47
BV-GDZ STEEL ACCESS COVER WITH GAS SPRINGS GAS AND WATER-PROOF OPENABLE FROM ABOVE AND BENEATH
Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. Opening: gas springs that facilitate opening make it possible for one user to open the access cover without much effort. The lock is opened from above with an Allen key and from below with a handle. Applications: access covers that must be gas and water-proof in indoor and outdoor use. Ideal for locations, such as service pits, where the access cover must be opened very often. Installation: gas springs are attached in place after the access cover has been installed and the concrete has hardened.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Gas spring 9. Opening handle
Opening the BV-GDZ access cover
The cross-sectional drawing of the BV-GDZ access cover.
The bottom locking system in the BV-GDZ access cover..
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
The number of springs
BV-GDZ 66
60 x 60
73.5 x 75.15
30 kg
O
1
BV-GDZ 86
80 x 60
93.5 x 75.15
38 kg
O
2
BV-GDZ 88
80 x 80
93.5 x 95.15
44 kg
O
2
BV-GDZ 110
100 x 100
113.5 x 115.15
58 kg
O
2
Cover depth: 5 cm, installation height: 18 cm (60 x 60-80 x 80) or 22 cm (100 x 100) *S = IN STOCK O= ORDER PRODUCT
48 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BVH-MAXI STEEL ACCESS COVER GAS AND WATER-PROOF CAN BE COVERED WITH YARD PAVING STONES Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties: the gas and water-proof access cover is manufactured with accurate dimensions and has a 10 cm cover that can be coated. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: access covers that must be gas and water-proof in indoor and outdoor use, when the cover is filled up with bricks, concrete slabs, or yard or street paving stones. Other models that can be filled up with yard paving stones: the easy-to-open BVH-GD MAXI access cover with gas springs and a load endurance of 125 kN; the reinforced BVHS 250 steel access cover with a load endurance of 250 kN that withstands the load generated by heavy vehicles; the reinforced BVHS 400 steel access cover with a load endurance of 400 kN that withstands the load generated by heavy vehicles. The cover depth of these models is 10.2 cm; several sizes available. Please consult our sales department for additional information! 1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip
The BV-MAXI access cover, partly filled up with paving stones.
The cross-sectional drawing of the BV-MAXI access cover. Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BVH maxi 44
40 x 40
55.2 x 55.2
22 kg
O
BVH maxi 55
50 x 50
65.2 x 65.2
27 kg
O
BVH maxi 66
60 x 60
75.2 x 75.2
28 kg
O
BVH maxi 86
80 x 60
95.2 x 75.2
35 kg
O
BVH maxi 88
80 x 80
95.2 x 95.2
40 kg
O
BVH maxi 106
100 x 60
115.2 x 75.2
40 kg
O
Cover depth: 10.2 cm, structural height: 12.5 cm *S = IN STOCK O= ORDER PRODUCT
The BV-MAXI access cover in the paving.
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
BVH-GD MAXI STEEL ACCESS COVER WITH GAS SPRINGS DEEP COVER CAN BE COATED WITH PAVING STONES Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. Properties:equipped with two gas springs. Easy to open. The gasproof and almost water-proof access cover is manufactured with accurate dimensions and has a 10 cm cover that can be coated. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access coveris almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: access covers that must be gas and water-proof in indoor and outdoor use, when the cover is filled up with bricks, concrete slabs, or yard or street paving stones in objects where the access cover must be easy to open. The cover depth is 10.2 cm; several sizes available. Gas springs are delivered separately and installed in place as the last parts after the access cover has been cast and coated.
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BVH-GD maxi 66
60 x 60
75 x 75
52 kg
O
BVH-GD maxi 86
80 x 60
95 x 75
60 kg
O
BVH-GD maxi 88
80 x 80
95 x 95
64 kg
O
BVH-GD maxi 106
100 x 60
115 x 75
65 kg
O
Cover depth 10.2 cm, installation height 12.5 cm *S = IN STOCK O= ORDER PRODUCT
49
50 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
HL GALVANISED ACCESS COVER Load endurance:15 kN (walking-resistant). Material: the frame and cover are made of a 2 mm steel profile. (45 x 45 mm, 50 x 50 cm and 60 x 60 cm, the access cover made of 3 mm steel). The cover can be used by placing the plate surface up or by turning the cover upside down and coating the chute section. The depth of the coatable casing section: 15 mm. The selection includes manhole options painted on order in RAL tones. Properties: equipped with a seal but it is not entirely gas and water-proof. The 30 x 30 cm access cover is provided with mounting screws. The access cover is opened by lifting it with the screws. Other sizes of manholes are opened with a separate lifting handle. Their delivery does not include mounting screws. If the access cover with the lifting handle is coated, the lifting handle must be embedded in the coating's opening on the other side of the access cover. Applications: access covers in indoor use, when they must be coatable and made of inexpensive sheet metal. Installation: the access cover is fitted in the opening and fastened with screws through the foot part holes in the opening's vertical edge. When necessary, the access cover can be attached with glue or mortar from the frame to the floor. Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
HL SI 33
30 x 30
35.5 x 35.5
3.7 kg
S
HL SI 45
45 x 45
50.5 x 50.5
8.7 kg
O
HL SI 55
50 x 50
55.5 x 55.5
10.2 kg
S
HL SI 66
60 x 60
65.5 x 65.5
12.6 kg
S
The HL SI 33 access cover used upside down and coated with parquet.
Structural height: 4.5 cm *S = IN STOCK O= ORDER PRODUCT
HL RIFFLED-PLATE ACCESS COVER Load endurance:15 kN (walking-resistant). Material: the frame is made of a 2 mm steel profile. The cover is made of 3 mm anti-slip riffled plate-coated aluminium. Properties:equipped with a seal but it is not entirely gas and water-proof. The 30 x 30 cm access cover is provided with mounting screws. The manhole is opened by lifting it with the screws. Other sizes of manholes are opened with a separate lifting handle. Their delivery does not include mounting screws. Applications: access covers in indoor use, when they must be made of inexpensive, antislip plate. They are available on order with stainless steel frames to allow their use in outdoor locations (if turned upside down, the other side can be coated if required). Installation:the access cover is fitted in the opening and fastened with screws through the foot part holes in the opening's vertical edge. When necessary, the manhole can be attached with glue or mortar from the frame to the floor. Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
HL TL 33
30 x 30
35.5 x 35.5
2.9 kg
O
HL TL 45
45 x 45
50.5 x 50.5
4.8 kg
O
HL TL 55
50 x 50
55.5 x 55.5
7.8 kg
O
HL TL 66
60 x 60
65.5 x 65.5
9.2 kg
O
*S = IN STOCK O= ORDER PRODUCT
The HL SI 66 manhole with a galvanised plate surface.
INSPECTION AND ACCESS HATCHES
www.dionepro.fi
RVE-RST
GAS AND WATER-PROOF Gas and water-proof, stainless steel Load endurance:15 kN Material: the frame, plate and reinforcement are made of stainless steel (quality 304) Properties:gas and water-proof model, flat structure. The special seal withstands chemicals well. The delivery includes an opening tool. Applications: pits in walking areas in buildings or in their neighbourhood, especially in objects that require perfect corrosion resistance. Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
RVE 22
20 x 20
30.5 x 30.5
6 kg
O
RVE 33
30 x 30
40.5 x 40.5
9 kg
O
RVE 44
40 x 40
50.5 x 50.5
13 kg
O
RVE 55
50 x 50
60.5 x 60.5
15 kg
O
RVE 54
60 x 40
70.5 x 50.5
15 kg
O
RVE 66
60 x 60
70.5 x 70.5
24 kg
O
RVE 86
80 x 60
90.5 x 70.5
30 kg
O
RVE 88
80 x 80
90.5 x 90.5
36 kg
O
RVE 106
100 x 60
110.5 x 70.5
36 kg
O
RVE 110
100 x 100
110.5 x 110.5
54 kg
O
*S = IN STOCK O= ORDER PRODUCT
RV-STEEL ACCESS COVER GAS AND WATER-PROOF
Load endurance:15 kN Material:the frame is made of 2 mm cold-formed, galvanised steel that has been profiled with precision tools. The access cover is made of embossed plate. Properties: gas and water-proof model, flat structure. The special seal withstands chemicals well. The delivery includes an opening tool. Applications:pits in walking areas in buildings and their neighbourhood; ideal for maintenance pits. Installation: the access cover must be installed exactly in accordance with its installation instructions. To ensure waterproofness, the access cover’s outer edge must be attached tightly to the floor with casting. Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
RV 64
60 x 40
70.5 x 50.5
22 kg
O
RV 66
60 x 60
70.5 x 70.5
29 kg
O
RV 86
80 x 60
90.5 x 70.5
37 kg
O
RV 88
80 x 80
90.5 x 90.5
45 kg
O
*S = IN STOCK O= ORDER PRODUCT
51
52 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
RVA- ALU
GAS AND WATER-PROOF . Load endurance:15 kN Material: the frame is made of extruded aluminium profile. The bottom side reinforcement is made of aluminium. Properties: gas and water-proof model, flat structure. The special seal withstands chemicals well. The delivery includes an opening tool. Applications: pits in walking areas in buildings and their neighbourhood, ideal for objects that require corrosion resistance and/or withstand only minor loads. Installation:the manhole must be installed in accordance with its installation instructions. To ensure waterproofness, the manhole's outer edge must be attached tightly to the floor with casting.
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
RVA 33
30 x 30
38.5 x 38.5
3 kg
O
RVA 55
50 x 50
58.5 x 58.5
5 kg
O
RVA 64
60 x 40
68.5 x 48.5
5 kg
O
RVA 66
60 x 60
68.5 x 68.5
8 kg
O
RVA 86
80 x 60
88.5 x 68.5
10 kg
O
RVA88
80 x 80
88.5 x 88.5
12 kg
O
RVA 106
100 x 60
108.5 x 68.5
12 kg
O
RVA 110
100 x 100
108.5 x 108.5
18 kg
O
*S = IN STOCK O= ORDER PRODUCT
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
53
HL STAINLESS STEEL ACCESS COVER Load endurance:15 kN (walking-resistant). Material:the frame and cover are made of a 2 mm stainless steel profile (45 x 45 mm, 50 x 50 cm and 60 x 60 cm; the access cover cover made of 3 mm stainless steel). The cover can be used by placing the plate surface up or by turning the cover upside down and coating the chute section. The depth of the coatable casing section: 15 mm. Properties: equipped with a seal but it is not entirely gas and waterproof. The 30 x 30 cm manhole is provided with mounting screws. The access cover is opened by lifting it with the screws. Other sizes of access coverS are opened with a separate lifting handle. Their delivery does not include mounting screws. If the access covers equipped with the lifting handle is coated, the lifting handle must be embedded in the coating on the other side of the access covers. Applications: indoor and outdoor access covers when it is necessary to use a plate-surface manhole or an easy-to-coat stainless steel access covers. Installation: the access cover is fitted in the opening and fastened with screws through the foot part holes in the opening's vertical edge. When necessary, the manhole can be attached with glue or mortar from the frame to the floor. Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
HL RST 33
30 x 30
35.5 x 35.5
3.7 kg
O
HL RST 45
45 x 45
50.5 x 50.5
8.7 kg
O
HL RST 55
50 x 50
55.5 x 55.5
10.2 kg
O
HL RST 66
60 x 60
65.5 x 65.5
12.6 kg
O
*S = IN STOCK O= ORDER PRODUCT
BR STEEL ACCESS COVER Material: galvanised steel after welding. Properties: the access cover is manufactured with accurate dimensions and equipped with a ventilation pipe. Hinged model that can be locked with a padlock. The ventilation pipe is provided with an insect net. When open, the manhole can be detached entirely. When necessary, the delivery may include the seal. Applications:wells, containers and water supply plants. Other materials: The BR access cover selection also includes an option made of stainless steel. It is suitable for objects that must be corrosion-resistant (model BRE-D).
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BR-D 55
49.5 x 49.5
56.5 x 56.5
15 kg
O
BR-D 66
59.5 x 59.5
66.5 x 66.5
18 kg
O
BR-D 88
79.5 x 79.5
86.5 x 86.5
21 kg
O
BRE-D 55
50.0 x 50.0
56.5 x 56.5
12 kg
O
BRE-D 66
60.0 x 60.0
66.5 x 66.5
15 kg
O
BRE-D 88
80.0 x 80.0
86.5 x 86.5
23 kg
O
BRE-*S = IN STOCK O= ORDER PRODUCT
1. Frame 2. Cover plate 3. Seal (accessory) 4. Padlock's handle 5. Ventilation pipe with an insect net 6. Hinge The cross-sectional drawing of the BR access cover
54 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BV THERMO ACCESS COVER GAS AND WATER-PROOF WITH THERMAL INSULATION Load endurance: 125 kN Material: the frame and cover are made of a 2 mm steel profile. The structure is galvanised after welding. The access cover is equipped with a detachable aluminium-coated thermal insulation plate. Properties: gas and water-proof access cover which is manufactured with accurate dimensions. The conical design and the lift key make it easy to open. Thanks to its small corners and accurately dimensioned edge structure, the access cover is almost inconspicuous in the flooring after its installation. The reinforcement inside the access cover improves structural load endurance. Applications: access cover that must be gas and water-proof in indoor and outdoor use, when special requirements are set for the access cover's thermal insulation ability. Installation:to ensure the best thermal insulation ability for the access cover, the gap between the access cover and the surrounding floor must be sealed with care.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Fastening clip 8. Insulation plate 9. Opening handle for insulation plate 10. Insulation plate frame
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BV-Thermo 55
50 x 50
63.5 x 63.5
19 kg
O
BV-Thermo 66
60 x 60
73.5 x 73.5
23 kg
O
BV-Thermo 86
80 x 60
93.5 x 93.5
29 kg
O
BV-Thermo 88
80 x 80
93.5 x 93.5
33 kg
O
BV-Thermo 106
100 x 60
113.5 x 73.5
33 kg
O
BV-Thermo 110
100 x 100
113.5 x 113.5
45 kg
O
BRE-*S = IN STOCK O= ORDER PRODUCT
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
BVA ALUMINIUM ROW ACCESS COVER Load endurance: 125 kN Material:the frame and cover edges are made of extruded aluminium, the base of aluminium plate. Properties: the two or three-part access cover with a seal is manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access cover's visible edge. The reinforcement in the access cover improves structural load endurance. The patented detachable intermediate spoke allows the access cover to be opened across its whole length. Properties: the access cover has two or more parts and a seal and is manufactured with accurate dimensions. Almost gas and water-proof (if subject to continuous water flow, some water may leak out from between the cover and the frame). The reinforcement in the access cover improves structural load endurance. Applications: challenging access covers in indoor use when high requirements are set for the appearance of the access cover's visible cover edges, or when the floor must be ground afterwards (e.g. parquet floors).
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Base plate 8. Corner welding 9. Locking nut 10. Divider 11. Divider seal 12. Divider locating sleeve
The cross-sectional drawing of the BVA row access cover.
Model
Inner measure (cm) CxD
Outer measure (cm) AxB
Weight before filling (kg)
S/O*
BVA multi 2-part
60 x 132
72 x 144
23 kg
O
BVA multi 3-part
60 x 203
72 x 215
32 kg
O
BVA multi 2-part
80 x 172
92 x 184
33 kg
O
BVA multi 3-part
80 x 263
92 x 275
47 kg
O
Cover depth: 6.6 cm, total structural height: 7.6 cm BRE-*S = IN STOCK O= ORDER PRODUCT
55
56 INSPECTION AND ACCESS HATCHES
www.dionepro.fi
BV-RA MULTI STEEL ACCESS COVER BVE-RA MULTI STAINLESS STEEL ROW ACCESS COVER
Load endurance:125 kN Material: The frame and cover of the BV-RV access cover is made of a 2 mm steel profile. The structure is galvanised after welding. The frame of the BVE-RA manhole is made of 2 mm stainless steel (quality 304). The surface is passivated throughout after welding. access covers made of acid-proof stainless steel (quality 316) are also available.
Properties: theaccess cover has two or more parts and a seal and is manufactured with accurate dimensions. Almost gas and waterproof (if subject to continuous water flow, some water may leak out from between the cover and the frame). The reinforcement in the access cover improves structural load endurance.
The patented intermediate spoke detachable without tools allows the access cover to be opened across its whole length. The height of the access cover chute is about 50 mm. The access covercan be equipped with a higher 100 mm chute on order. The chute is filled up with yard paving stones. Applications: challenging objects, such as those in industrial premises and airports. Dimensions: steel and stainless steel row access cover are made to order in accordance with accurate dimensions. We have made row access covers, for instance, for sewers with several tens of access covers in parallel.
www.dionepro.fi
INSPECTION AND ACCESS HATCHES
BVA-RA ALUMINIUM ROW ACCESS COVER Load endurance: 125 kN Material: the frame and cover edges are made of extruded aluminium, the base of aluminium plate. Properties: gas and water-proof row access cover which is manufactured with accurate dimensions. Thanks to its small corners and accurately dimensioned edge structure, the manhole is almost inconspicuous in the flooring after its installation. Ideal for locations where extremely high requirements are set for the appearance of the access cover's visible edge. The reinforcement in the access cover improves structural load endurance. The patented detachable intermediate spoke allows the access cover to be opened across its whole length. The delivery of more than 3-metre long row access cover includes separate side frames that are easy to lengthen. Almost gas and water-proof (if subject to continuous water flow, some water may leak out from between the cover and the frame). The reinforcement in the access cover improves structural load endurance. Applications: challenging access cover in indoor use when high requirements are set for the appearance of the access cover's visible cover edges, or when the floor must be ground afterwards (e.g. parquet floors). Ideal for cable and HEPAC ducts that must be opened across their whole length.
The light, hinged access cover is easy to open.
The cross-sectional drawing of the BVA row access cover.
Row access cover installed in the corridor of a museum.
1. Frame 2. Cover 3. Seal 4. Reinforcement 5. Locking bolt 6. Shield plug 7. Base plate 8. Corner welding 9. Locking nut 10. Divider 11. Divider seal 12. Divider locating sleeve
57
HANDRAILS AND The DionePro vinyl handrails and impact guards are easy-to-clean and protected against bacteria. The vinyl-coated protective products are durable in premises subject to heavy use, such as hospitals and health centres. They are also commonly used in assisted living facilities, offices and ships. The vinyl products designed to protect real estates are shock-proof and help keep inner surfaces of the real estates in good condition for a long time. The colour of the vinyl protection profiles can be chosen from among 60 different colour options! The selection includes different handrail options, impact guide options mounted horizontally on the wall and outer corner protection profiles mounted on the walls. All products are available in tones that fit in with each other. The delivery includes all mounting accessories as well as end and connection pieces.
IMPACT GUARDS Good and safe hygienic solutions that last for a long time in health care premises.
60 IMPACT GUARDS, HANDRAILS AND SUPPORT
www.dionepro.fi
VINYL-COATED HANDRAILS WITH ALUMINIUM FRAME The easily cleaned and durable handrail solutions are well suited to hospitals, nursing homes and other public premises. All vinyl-coated handrails and impact guards are made on order and in tones that fit in with each other.
Material: made of vinyl-coated aluminium. Standard measure 3.66 m. The selection includes 60 colour options. Fastening:easy and quick to mount. The delivery includes mounting accessories. End and corner pieces are available. Applications: a durable handrail solution for many premises, such as offices, hotels, schools, shopping centres, hospitals and other public premises.
BR-400V Assembly drawing (all necessary parts included)
BR-400V 1. 1 1/2� diameter 2. Vinyl handrail 3. Decoration strip 4. Mounting screws 5. Vinyl impact guard 6. Impact absorber 7. Aluminium frame 8. Wall bracket 9. Wall reinforcement
Width/type
Length
Product code
S/O*
BR400V handrail/impact guard
365 cm
BR400V
O
BR400V corner piece
OBR-450V
O
BR400V bracket
BR-108
O
BR400V end piece (left)
BRL425V
O
BR400V end piece (right)
BRR425V
O
*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS
BR-400V 1. BRL-425V end piece 2. 3 1/8� diameter 3. Mitre joint in the inner corner 4. BRA-400V aluminium frame 5. OBR-450V outer corner 6. Factory-made joint extension 7. BR-108 clip 8. BRV-1200 vinyl-coated surface section 9. BRR-425V end piece 10. B-100 impact absorber 11. BRI-400V decoration 12. WGV-4 vinyl-coated surface section
www.dionepro.fi
IMPACT GUARDS, HANDRAILS AND SUPPORT
61
BR-500V
BR-500V 1. 1 1/2” diameter 2. Vinyl-coated surface section 3. Mounting screws 4. Aluminium frame 5. Wall bracket 6. Wall reinforcement BR-500V 1. 2 15/16” 2. BR-527 end piece 3. IOC-557 inner/outer corner 4. IOC-557 inner/outer corner 5. BRV-500 vinyl-coated surface section 6. Factory-made joint extension 7. BRA-500 aluminium frame 8. BR-107 clip 9. BR-527 end piece
Width/type
Length
Product code
S/O*
BR500V handrail/impact guard
365 cm
BR-500V
O
BR500V corner piece
IOC-527
O
BR500V bracket
BR-107
O
BR500V end piece
BR-527
O
*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS
Assembly drawing (all necessary parts included)
BR-1200 BR-1200 1. Aluminium frame 2. 1 1/2” diameter 3. Vinyl-coated surface section 4. Wall bracket 5. Mounting screws 6. Wall reinforcement
Width/type
Length
Product code
S/O*
BR1200 handrail/impact guard
365 cm
BR-1200
O
BR1200 corner piece
IOC-1250
O
BR1200 bracket
BR-1206
O
BR1200 end piece (right)
BRR-1225
O
BR1200 end piece (left)
BRL-1225
O
*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS
Assembly drawing (all necessary parts included) BR-1200 1. BRL-1225 end piece 2. BRV-1200 vinyl-coated surface section 3. IOC-1250 inner/outer corner 4. IOC-1250 inner/outer corner
5. BR-1206 clip 6. Factory-made joint extension 7. BRA-1200 aluminium frame 8. BRR-1225 end piece 9. 3”
62 IMPACT GUARDS, HANDRAILS AND SUPPORT
www.dionepro.fi
CLIP-FASTENED VINYL IMPACT GUARDS The surface of clip-fastened vinyl-coated impact guards is easy to keep clean. The clip-fastened guards are equipped with impact-absorbing springs. The delivery includes end pieces if required. Material: easy-to-clean vinyl coating. Mounting clips are provided with impact-absorbing springs. Fastening: easy and quick to mount. End pieces are available. Applications: offices, hotels, schools, shopping centres, hospitals and other public premises. Width/type
Length
Product code
S/O*
WG-6C impact guard
365 cm
WG-6C
O
WG-6C end piece
ETC-6C
O
WG-6C corner piece (outer)
OTC-6C
O
WG-6C bracket clip
WG-6C-ASM-1
O
WG-8C
O
WG-8C end piece
ETC-8C
O
WG-8C Corner piece (outer)
OTC-8C
O
WG-8C impact guard
365 cm
WG-8C bracket clip WG-5C impact guard
WG-5C
O
WG-5C end piece
ETC-5C
O
WG-5C corner piece (outer)
OTC-5C
O
WG-5C corner piece (inner)
ITC-5C
O
WG-5C bracket clip
WG-8C-ASM-1
O
WG-7C
O
WG-7C impact guard
365 cm
365 cm
WG-7C end piece
ETC-7C
WG-7C corner piece (outer)
OTC-7C
WG-7C corner piece (inner)
ITC-7C
WG-7C bracket clip
WG-7C-ASM-1
*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS
WG-5C cross-sectional drawing
WG-6C cross-sectional drawing
WG-5C, WG-6C, WG-7C, WG-8C 1. Mounting screws 2. Vinyl-coated surface section 3. Mounting clip 4. Brackets for end pieces
WG-7C cross-sectional drawing
WG-8C cross-sectional drawing
www.dionepro.fi
IMPACT GUARDS, HANDRAILS AND SUPPORT
PLASTIC-FRAMED VINYL-COATED CORNER PROTECTION PROFILE The shock-resistant vinyl-coated corner protection profile protects efficiently against dents. Available in tones that fit in with the rest of the interior decoration. The delivery includes end pieces.
Material: easy-to-clean vinyl coating. The mounting rail is made of flexible recycled plastic. Fastening:easy and quick to mount. End pieces are available. Applications: offices, hotels, schools, shopping centres, hospitals and outer corners in other public premises.
Width/type
Length
Product code
S/O*
51 x 51 mm, corner protection profile
244 cm
CG-20R
O
76 x 76 mm, corner protection profile
244 cm
CG-10R
O
*S = IN STOCK O= ORDER PRODUCT
*S = IN STOCK O= ORDER PRODUCT, DELIVERY TIME 3 MONTHS
CG-20R
CG-10R
63
64 IMPACT GUARDS, HANDRAILS AND SUPPORT
www.dionepro.fi
COLOUR MAP Our colour map for vinyl materials enables you to emphasise or fade out elements and shapes with soft protection profiles and handrails.
(10) White
(301) LinenWhite
(554) Mission White
(541) White Sand
(361) Pearl
(370) Eggshell
(411) Prumice
(555) Porcelain
(193) Wheat
(2) Ivory
(263) Pale Yellow
(569) Saffron
(313) Champagne
(648) Monterey
(497) Chablis
(676) Dover White
(268) Doeskin
(379) Mojave Sand
(148) Desert Sand
(3) Tan
(682) Khaki Brown
(718) Silkworm
(21) Cappuccino
(113) Toffee
(204) Shell
(486) Caisson
(359) Ginger Spice
(288) Mocha
(694 CafĂŠ Au Lait
(4) Brown
(385) Beige Desert
(269) Ecru
(22) Woodlands
(293) See Foam
(377) Teal
(382) Stormy Blue
(371) Sage Green
(376) Pale Jade
(29) Blue Ice
(369) Blue Fog
(265) Windsor Blue
(490) Blue Bird
(520) Brittany Blue
(583) Alexis Blue
(176) Taupe
(238) Bone
(483) Harvard Gray
(297) Chinchilla
(210) Silver Gray
(289) Pearl Gray
(494) (366) Lavender Hetather Soft Peach
(381) Dawn
(304) (373) English Rose Victorian Rose
(300) Grotto
(5) Gray
(380) Cordovan
(156) Hunter Green
(1) Black
The tones in the colour map are suggestive. Please check the tones from the material map in connection with ordering.
www.dionepro.fi
IMPACT GUARDS, HANDRAILS AND SUPPORT
SHOPPING TROLLEY SHELTERS Trolley shelters are ideal for protecting walls in shops and hospitals, for example.
DUCT O R P NEW
• Aluminium frame • Durable and flexible vinyl coating • End pieces for the profile are available. • A total of 60 colour options available!
EB -10 Flexible vinyl-coated profile
EB-5 end piece
Mitre joint of inner corners
EBV-10 flexible vinyl-coated profile
Mounting screws fastened to the wall at intervals of 45 cm EB-5 end piece Outer corners
Steel rail
Steel rail
EB-1 Flexible vinyl-coated profile
EBP-2 end piece Aluminium rail Mitre joint of inner Flexible vinyl-coated profile corners
Mounting screws fastened to the wall at intervals of 80 cm
joint Factory-made
Aluminium mounting rail Outer corner
65
66 IMPACT GUARDS, HANDRAILS AND SUPPORT
www.dionepro.fi
CORNER PROTECTION PROFILES FOR PARKING HALLS
DUCT O R P NEW
Rubber corner protection profiles are well suited to extremely hard indoor and outdoor use.
CG-2E HEAVY-DUTY CORNER PROTECTION PROFILE, BLACK Minimum corner radius 14 mm 22 mm radius Equipped with holes at the installation stage
Corner protection profile
Fastened with screws at intervals of 90 cm
CG-4 CORNER PROTECTION PROFILE, BLACK 32 mm radius
End piece
Steel mounting rail EDPM rubber profile
Specified height
Mounting screws End piece Skirting profile
CG-15 HEAVY-DUTY CORNER PROTECTION PROFILE, BLACK OR YELLOW Delivered without holes (glue-fastened)
Corner protection profile
Specified height
www.dionepro.fi
IMPACT GUARDS, HANDRAILS AND SUPPORT
IMPACT GUARDS FOR PARKING HALLS Applications: • parking halls
DUCT O R P NEW
• industrial premises • loading platforms
WT-25
D-3
E-1
M-2
IMPACT GUARDS FOR MARINE TRAFFIC MD-5
Weather-proof impact guard is ideal for extremely hard outdoor use. Applications: • quays • ships
67
68 IMPACT GUARDS, HANDRAILS AND SUPPORT
www.dionepro.fi
SUPPORT HANDLES AND HANDRAILS FOR ASSISTED LIVING FACILITIES AND SENIOR CITIZENS' HOMES DionePro support handrails are shock and corrosion-resistant, high-quality safety products. They provide elderly, physically disabled people with means of coping independently with the challenges set by their living environment at home.
DUCT O R P NEW
The handrails and handles are made of stainless steel and provided with satin coating or white-powder painting. The products are easy to mount and durable during the whole building's life cycle in assisted living facilities and hospitals.
Model
Material
Colour
Dimensions (mm)
Diameter (mm)
Consignment (pcs)
108-45S 108-60S 108-70S 108-80S 108-90S
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
satin satin satin satin satin
450 x 85 mm 600 x 100 mm 700 x 100 mm 800 x 100 mm 900 x 100 mm
32 mm 32 mm 32 mm 32 mm 32 mm
10 pcs 10 pcs 10 pcs 10 pcs 10 pcs
T T T T T
104-91S 104-106S 104-120S 104-182S 104-274S
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
satin satin satin satin satin
915 x 85 mm 1067 x 85 mm 1200 x 85 mm 1828 x 85 mm 2743 x 85 mm
32 mm 32 mm 32 mm 32 mm 32 mm
5 pcs 5 pcs 5 pcs 5 pcs 5 pcs
T T T T T
109-45S
Stainless steel
satin
450 x 200 mm
32 mm
5 pcs
T
101-72S
Stainless steel
satin
720 x 720 mm
32 mm
5 pcs
T
413-60S 413-70S 413-85S 413-90S
Stainless steel Stainless steel Stainless steel Stainless steel
satin satin satin satin
600 mm 700 mm 850 mm 900 mm
32 mm 32 mm 32 mm 32 mm
5 pcs 5 pcs 5 pcs 5 pcs
T T T T
111-60S
Stainless steel
satin
600 x 1180 mm
32 mm
5 pcs
T
*S = IN STOCK O= ORDER PRODUCT
S/O
Illustration
www.dionepro.fi
IMPACT GUARDS, HANDRAILS AND SUPPORT
Duuri Oy works in cooperation with architects and industrial designers to design accessories for elderly people. Such a product set is right now under development that improves the comfort of assisted living facilities and homes for senior citizens while providing physically disabled people with full support and increased safety in their living environment.
Model
Material
Colour
Dimensions (mm)
Diameter (mm)
Consignment (pcs)
108-45W 108-60W 108-70W 108-80W 108-90W
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
white powder paint white powder paint white powder paint white powder paint white powder paint
450 x 85 mm 600 x 100 mm 700 x 100 mm 800 x 100 mm 900 x 100 mm
32 mm 32 mm 32 mm 32 mm 32 mm
10 pcs 10 pcs 10 pcs 10 pcs 10 pcs
T T T T T
104-91W 104-106W 104-120W 104-182W 104-274W
Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel
white powder paint white powder paint white powder paint white powder paint white powder paint
915 x 85 mm 1067 x 85 mm 1200 x 85 mm 1828 x 85 mm 2743 x 85 mm
32 mm 32 mm 32 mm 32 mm 32 mm
5 pcs 5 pcs 5 pcs 5 pcs 5 pcs
T T T T T
109-45W
Stainless steel
white powder paint
450 x 200 mm
32 mm
5 pcs
T
101-72W
Stainless steel
white powder paint
720 x 720 mm
32 mm
5 pcs
T
413-60W 413-70W 413-85W 413-90W
Stainless steel Stainless steel Stainless steel Stainless steel
white powder paint white powder paint white powder paint white powder paint
600 mm 700 mm 850 mm 900 mm
32 mm 32 mm 32 mm 32 mm
5 pcs 5 pcs 5 pcs 5 pcs
T T T T
111-60W
Stainless steel
white powder paint
600 x 1180 mm
32 mm
5 pcs
T
*S = IN STOCK O= ORDER PRODUCT
S/O
Illustration
69
FREQUENTLY ASKED QUESTIONS
70 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
PROFILES
How to cut stainless steel profiles? The easiest way is to use a wheel fit for cutting stainless steel. The wheel is attached to an angle grinder. The profiles are cut to mitre by using a suitable cutoff saw/metal blade combination, or a bandsaw fit for cutting stainless steel. Individual profiles are easy to cut and saw to mitre with a hacksaw as well.
Are DuuriPro products fit for premises with a swimming pool? If in contact with chlorinated water, the profiles or manholes must be made to order from acid-proof steel. Tiling profiles can also be made of plastic. The delivery time for made-to-order, acid-proof steel manholes is 3–4 weeks and the delivery time of skirtings is 2–3 weeks.
INSPECTION AND ACCESS HATCHES
How to ensure waterproofness when mounting a hatch/access cover in place? The stainless steel and steel manholes with seals are water-proof. The base plate of aluminium manholes is welded with spot welding (e.g. BVA). If the manufacturing method requires an absolutely water-proof solution, the manhole must be cast with water-proof concrete, or the bottom side of the flooring provided with water-proof insulation. The connection point between the floor and the manhole frame must be made water-tight by using a suitable additive in the concrete when manhole edges are attached to the floor by casting. If in doubt, please consult our sales department for additional information.
Why is there a dent outwards from the inside in one of the access cover edges? Has the access cover been damaged during transport? The dent is a locating mark. It ensures that the manhole is easy to close after opening. Closing the manhole in the same position after it has been opened makes it possible to put it easily in place, in spite of the stress that might have occurred in the manhole at the calvanising or casting stage. The dent is not transport damage but a specifically designed detail to prove that the quality of the design and finish is excellent.
Is it possible to mount the access cover directly on the floor at the surface casting stage? Pay special attention to potential shrinkage and expansion at the casting's drying stage. The manhole cover must be in place in the frame during installation. Use flexible wedges (minimum width 10 mm) in the outer edges of the frame, if necessary. Remove the wedges when the surface casting has dried. Seal the grooves after this with a flexible sealing compound.
HANDRAILS
What is the easiest way to clean vinyl-coated handrails and impact guards? The vinyl surface can be cleaned with standard detergents during general cleaning. Is it possible to change the vinyl surface strip when necessary without replacing the whole profile? The surface strip in DionePro vinyl profiles can be replaced during renovation and when the decoration tones are changed. As it is mounted directly on top of the old aluminium strip, it is not necessary to replace the whole profile, which saves costs and natural resources.
How to lengthen vinyl handrails in long corridors? The delivery includes an appropriate number of extension pieces to make it possible to connect the extension points with each other. It is advisable to prepare extension points from factory-made ends to ensure that the joint is inconspicuous.
www.dionepro.fi www.dione.fi
Duuri Oy’s sales and delivery terms 1. Scope of application
5.3
9. Terms of delivery
These Duuri Oy’s sales and delivery terms shall, unless otherwise agreed, be applied in transactions concerning trade in goods (hereinafter “products”) between Duuri Oy and its customer (hereinafter also the Buyer), where Duuri Oy is the seller of the goods. The Buyer and Duuri Oy are referred to jointly as the Contracting Parties.
The prices only include Duuri Oy’s standard packaging. Any other packing materials shall be charged for separately. A charge of 10 € / each shall be made for customer pallets.
9.1
5.4
When placing an order, the Buyer accepts these sales and delivery terms.
Duuri Oy reserves the right to make price adjustments if exchange rates, raw material prices, import charges or other fees, taxes or public fees change after making the offer and before payment by the Buyer. With regard to exchange rates, Duuri Oy is entitled to adjust the price if the exchange rate difference between the date of offer and the date of payment is greater than 2%. Duuri Oy observes the average rate of exchange quoted by the European Central Bank.
When agreed, Duuri Oy shall deliver the products to the Buyer at the Buyer’s expense (FCA, Incoterms 2000).
2. Offer 2.1 Duuri Oy may give a written offer concerning the products to the Buyer. The offer shall be valid for 30 days from the date of the offer, unless otherwise stated in the offer.
6. Transfer of ownership
2.2
The ownership of a product is transferred to the Buyer when the whole purchase price is paid. However, the A contract comes into being when the Buyer accepts Buyer is entitled, in the course of his normal business the offer during the period of validity of Duuri Oy’s offer. activity, to sell also such products that have not yet been paid and for which payment is not yet due. 2.3 Ownership is then transferred to the Buyer’s customer An acceptance that arrives after the period of validity when the product is delivered. has lapsed or a reply that includes additions, limitations 7. Payment of the purchase price or conditions is considered to be a counter-offer by the Buyer. A contract comes into being on the basis of a counter-offer if Duuri Oy states that it accepts the counter-offer. 3. Order and confirmation of order 3.1 The Buyer may place an order for products, even in the absence of an offer, either orally (e.g. by telephone) or in writing (including telefax and email). In the order, the Buyer shall specify the person placing the order, the goods ordered, the delivery address, required time of delivery and contact person.
7.1
3.3 If Duuri Oy has not given a written confirmation of order, but delivers the ordered goods in accordance with the order, this is held to be a confirmation of order by the same. 4. Ranking order of validity of contract documents Contract documents supplement each other. If contract documents are mutually contradictory, they shall be observed in the following order of validity, unless otherwise mentioned in the contract:
If the Buyer has any receivables from Duuri Oy, the set-off of the receivable against any invoice must be agreed separately with Duuri Oy. 7.4 If the Buyer delays considerably in making payment, Duuri Oy is entitled to cancel the transaction. The Buyer is then obligated to reimburse Duuri Oy in full for the costs incurred in cancelling the transaction and getting the goods back, including any collection charges. 8. The delivery condition of the product
Duuri Oy shall be responsible for the quality and other characteristics of the products as defined in the agreement so that they are in accordance with information given in writing by Duuri Oy specifically for the transaction in question.
- an invitation for tenders 5. Pricing and invoicing 5.1 The prices in Duuri Oy’s price list do not include value added tax. Prices in offers do not include value added tax, unless otherwise stated. Value added tax and any other such taxes or fees shall be added to the stated prices and shall be invoiced in accordance with legislation in force at the time. Prices and other information in price lists are for reference and Duuri Oy reserves the right to make changes. 5.2 Products shall be invoiced at the price valid on the date of delivery, unless otherwise agreed.
9.3 The instructions given by Duuri Oy concerning transporting and storing shall be observed.
10.2
- confirmation of an order including its appendices
- Duuri Oy’s sales and delivery terms
The recipient of the product shall inspect the packages and acknowledge receiving the products in accordance with the delivery note by signing it. Any notices concerning the quantity and condition of the products shall in this connection be recorded in the delivery note which shall also be signed by the carrier. Furthermore, any notices concerning the quantity of products delivered shall be given to Duuri Oy within two (2) working days of receiving the products.
7.2
8.1
- an offer including its appendices
9.2
10. Time of delivery and delays
- a written contract including its appendices
- a written order including its appendices
Deliveries in Finland that exceed seven hundred (700) euros in net value excluding value added tax may be delivered freight paid if so agreed (CPT, Incoterms 2000).
The purchase price is paid against the invoice in accordance with agreed payment terms. The term of payment is fourteen (14) days net. The purchase price is deemed to have been paid when the payment arrives in Duuri Oy’s account.
If the Buyer does not pay the purchase price within the agreed time, Duuri Oy is entitled to charge interest on arrears as mentioned in the contract or invoice and may charge reasonable collection charges. Duuri Oy shall charge 16% interest on arrears from the due 3.2 date onwards. Duuri Oy shall charge an additional If Duuri Oy accepts the order as such, Duuri Oy shall give invoicing charge of 10 € for sending an invoice for the Buyer a written confirmation of order (including interest on arrears. telefax and email) in which it confirms the order. If Duuri Oy does not accept the order as such, they shall inform 7.3 the Buyer of this.
The delivery place of the products shall be Duuri Oy’s warehouse in Helsinki (Ex Works, Incoterms 2000).
8. 2 The Buyer shall be responsible for the correctness of the detailed information given to Duuri Oy concerning the purpose of use and the measurements of the products ordered. 8.3 The Buyer shall give notice of any delays in delivery or defects in the products within eight (8) days from the date of delivery in order to retain its right to make a claim concerning the defect. If the defect is noticed later, and it was not possible to notice it earlier, the Buyer must give notice of the defect immediately in order to retain its right to make a claim concerning the defect.
have been repaired or replaced is valid up to the end of the guarantee period of the original product. 12. Returns It is necessary that Duuri Oy gives its consent in advance before any returns are made. No credit is given for goods returned without consent. Returns must be implemented within thirty (30) days of delivery of the products. Duuri Oy shall credit 80% of the invoiced price of faultless products that are returned in unopened packages at the Buyer’s cost. No credit is given for products that are tailor-made. The following shall always be reported when returning: - the number and date of the invoice and delivery note, - with whom was the return agreed and when, and - the reason for the return. 13. Limitation of liability 13.1 Duuri Oy is not liable for any damage caused by delayed delivery of products unless the Contracting Parties have specifically agreed on this. 13.2
10.1
Duuri Oy shall not be liable for any production losses or for any unrealised profits or for any other indirect damage caused by its products or its activity.
The normal time of delivery for standard goods in stock is five (5) working days, unless otherwise agreed.
13.3
If the Contracting Parties have agreed on the time of delivery and Duuri Oy is late in delivery, Duuri Oy is obligated to inform the Buyer immediately when it gets to know of the delay. At the same time Duuri Oy shall report the reason for the delay and shall, if possible, give a new estimated time of delivery. 10.3 If a definite date of delivery has been agreed and the delay on the part of one Contracting Party causes essential damage to the other Contracting Party, this Party is entitled to cancel the agreement with regard to the delayed delivery lot after negotiating with the Party causing the delay.
Duuri Oy shall not be liable for any direct damage to persons, things or property caused by the products unless it can be proved that the damage was caused by a faulty product. In that case the upper limit of Duuri Oy’s liability for damages is the price of the product that caused the damage. 13.4 Duuri Oy shall not be liable for any damage that is caused when products are used for any purposes other than those for which they are specifically intended. 13.5
11. Guarantee
These terms of limited liability do not, however, limit the liability of Duuri Oy under mandatory legislation for damage caused by the products.
11.1
14. Force Majeure
The products may have a valid guarantee possibly granted by their manufacturer. This must always be ascertained for each product. The guarantee period starts from the date of delivery. Duuri Oy is not responsible for guarantees given by other manufacturers, or how they are implemented.
A basis for release (force majeure) from the obligations under the contract is deemed to be such an abnormal event that affects the case and prevents the fulfilment of the contract after the contract has been made and which the Contracting Parties had no reason to take into consideration when the contract was made and which is beyond the control of the Contracting Parties and its inhibitory effects cannot be eliminated without unreasonable additional costs or unreasonable loss of time. Such an event may be war, internal unrest, requisition or confiscation by the authorities, import or export ban, natural catastrophe, stoppage of public transport or energy supply, labour dispute, fire or other equally significant and abnormal reason that is beyond the control of the Contracting Parties.
11.2 A guarantee is valid only if the handling, use, maintenance and other corresponding instructions for the product have been observed properly. Furthermore, in order for the guarantee to be valid, it is necessary that the Buyer has fulfilled its obligations arising from the delivery and as defined in the contract. 11.3 If defects in raw materials or manufacturing are found in the product, this must be reported immediately to Duuri Oy during the guarantee period, however, not later than twelve (12) months from the date of delivery. 11.4 Duuri Oy pledges with regard to products that it guarantees, either to repair the defective product or replace it with a new product, at its own discretion and at its own cost. On the part of other products, Duuri Oy is entitled at its own discretion and at its own cost, either to repair the defective product or replace it with a new product. The guarantee on products that
15. Governing law and dispute resolution The agreement between Duuri Oy and the Buyer concerning orders and deliveries of products shall be governed by Finnish laws. Differences of opinion between Duuri Oy and the Buyer concerning orders and deliveries of products shall be solved in the Helsinki District Court as the court of first instance, if the Contracting Parties are unable to reach mutual understanding on their differences through negotiation.
Duuri Oy’s sales and delivery terms1.9.2011
72 PROFILES FOR PUBLIC PREMISES
www.dionepro.fi
Duuri Oy
D-Profile Ab D-Profile As
ООО «Дюри Профайл Рус»
SIA D-Profile
Tapulikaupungintie 35 PL 26, 00750 Helsinki FINLAND tel +358-9-351 050 fax +358-9-3510 5222 dione@dione.fi
Kabelvägen 10 55302 Jönköping SVERIGE tel +46 36 186 363 fax +46 36 186 366 info@d-profile.se
г.Апрелевка, Сентябрьская ул., д.1255302, 143362 Москва РОССИЯ Тел: +7-495-982 3875 Факс+7-495-982 3875 duuri@duuri.ru
Rigas iela 6 2114 Olaine LATVIA tel +371 778 3506 fax +371 778 3508 info@d-profile.lv
Revefaret 12 3060 Svelvik NORGE tel +47 3377 3275 fax +47 3377 3243 info@d-profile.no
Printed in 2011
www.dionepro.fi