Test Report
No. F690101/LF-CTSAYHA15-06842R1
Issued Date : 2015. 07. 31
Page 1 of 7
I&S CO., LTD. 172 Hojuk, Hwasanro, Oksanmyeon Cheongwongun, Chungbuk Korea The following sample(s) was/were submitted and identified by/on behalf of the client as:SGS File No.
:
AYHA15-06842R1
Sample Description
:
DWIMGULER CASTLE
Detail of Sample
:
Plastic castle-floor with activity play.
Style no./Item no.
:
-
Order No.
:
-
Manufacturer
:
-
Country of Origin
:
-
Country of Destination
:
-
Labeled Age Grading
:
12 months and over
Requested Test Age Grading
:
None
SGS Assessed Age Grading
:
All ages
Received Date
:
2015. 07. 01
Resubmitted Sample Date
:
2015. 07. 23
Test Period
:
2015. 07. 01
Test Method
:
For further details, please refer to following page (s)
Test Results
:
For further details, please refer to following page (s)
Supersedes /Referral
:
This test report supersedes previous report CTSAYHA15-06842” issued by SGS Korea.
Result Summary
:
to
2015. 07. 30
Test Requested US Public Law 110-314 (Consumer Product Safety Improvement Act of 2008, CPSIA): - ASTM F963-11 : Standard Consumer Safety Specification on Toy Safety - Flammability of toys (16 C.F.R. 1500.44) - Small part (16 C.F.R. Part 1501) - Sharp points and edges (16 C.F.R. 1500.48 and 49)
number,
“F690101/LF-
Conclusion PASS PASS See Remark PASS
SGS Korea Co., Ltd.
Daesung Lee / Technical Manager This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillanc
Test Report
No. F690101/LF-CTSAYHA15-06842R1
Issued Date : 2015. 07. 31
Page 2 of 7
Result Summary ASTM F963-11 As specified in ASTM F963-11 standard consumer safety specification on toy safety. Clauses Relevant to Sample Clause Description 4 4.1 4.2 4.3 4.3.5
4.5 4.6 4.6.1 4.7 4.8 4.9 4.13 4.18 5 5.2 5.8
Safety Requirements Material Quality ** Flammability Test (16 C.F.R. 1500.44) Toxicology Heavy Elements 4.3.5.1– Heavy Elements in Paint/Similar Surface Coating Materials 4.3.5.2– Heavy Metal in Substrate Materials Sound-Producing Toys Small Objects Small Objects (16 C.F.R. 1501) Accessible Edges (16 C.F.R. 1500.49) Projections Accessible Points (16 C.F.R. 1500.48) Folding Mechanisms and Hinges Holes, Clearance and Accessibility of Mechanisms Safety Labeling Requirements Age Grading Labeling Toys Intended to be Assembled by an Adult (*Remark: Packages of toys that are intended to be assembled by an adult and that in their unassembled state contain potentially hazardous sharp edges or points, or small parts if the toy is intended for children under 3 years of age, shall carry safety labeling in accordance with ASTM F963 clause 5.3 stating that the toy is to be assembled by an adult.)
N/A = Not Applicable
Result Pass Pass (See Note 1) Pass (See Note 2) Pass (See Note 3) Pass Pass Pass Pass Pass Pass Pass Pass *Remark
** Visual Examination
N/C = Not Conducted (As per Client’s request.)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillanc
Test Report
No. F690101/LF-CTSAYHA15-06842R1
Issued Date : 2015. 07. 31
Page 3 of 7
Result Summary ASTM F963-11 As specified in ASTM F963-11 standard consumer safety specification on toy safety. Clauses Relevant to Sample Clause Description 6 6.4
7 7.1 8 8.5 8.7 8.8 8.9 8.10
Instructional Literature Toys Intended to be Assembled by an Adult (**Remark: Packages of toys that are intended to be assembled by an adult and that in their unassembled state contain potentially hazardous sharp edges or points, or small parts if the toy is intended for children under 3 years of age, shall carry safety labeling in accordance with ASTM F963 clause 5.3 stating that the toy is to be assembled by an adult.) Producer’s Markings Producer’s Markings Test Methods Normal Use Testing Impact Test Torque Test Tension Test Compression Test
Result **Remark
Pass Pass Pass Pass Pass Pass
N/A = Not Applicable
** Visual Examination
N/C = Not Conducted (As per Client’s request.)
Note *1: Flammability Test (Clause 4.2) - Flammability Test on Solid Sample
Burning Rate (inch/sec)
Castle floor
DNI
DNI = Did Not Ignite Requirement
:
A toy / component is considered a “flammable solid” if it ignites and burns with a self-sustaining flame at a rate greater than 0.10 in/sec along its major axis.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillanc
Test Report
No. F690101/LF-CTSAYHA15-06842R1
Issued Date : 2015. 07. 31
Page 4 of 7
Note *2 : Heavy Elements (Clause 4.3.5) ASTM F963-11, Clause 4.3.5.1- Heavy Elements in Paint/Similar Surface Coating Materials Total Lead Method: With reference to CPSC-CH-E1003-09.1 - Standard Operating Procedure for Determining Heavy Metal in Paint and Other Similar Surface Coatings. Analysis was performed by ICP-OES. Test Items
20
Result(s) 1 N.D.
-
PASS
MDL
Lead (Pb) Conclusion
Total Limit (ppm) 90 -
Description : 1. Blue paint (door protection) Note.
(1) N.D. = Not detected. (< MDL) (2) MDL = Method Detection Limit (3) The test part was selected by applicant’s request
Soluble Heavy Metals Method : With reference to ASTM F963-11 Clause 8.3. Analysis was performed by ICP-OES. Results (Unit : mg/kg) Element
Limit MDL 1
Soluble Lead (Pb)
Soluble Antimony (Sb)
Soluble Arsenic (As)
Soluble Barium (Ba)
Soluble Cadmium (Cd)
Soluble Chromium (Cr)
Soluble Mercury (Hg)
Soluble Selenium (Se)
90 5 N. D.
60 5 N. D.
25 2.5 N. D.
1000 10 678
75 5 N. D.
60 2.5 5.40
60 2.5 N. D.
500 10 N. D.
Mass of trace amount of sample no.1 = 11.1 mg Description : 1. Blue paint (door protection) Note.
(1) N. D. = not detected (< MDL) (2) MDL = Method Detection Limit (3) Results shown are of the adjusted analytical result. (4) The test part was selected by applicant’s request
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillanc
Test Report
No. F690101/LF-CTSAYHA15-06842R1
Issued Date : 2015. 07. 31
Page 5 of 7
Note *3 : Heavy Elements (Clause 4.3.5) ASTM F963-11, Clause 4.3.5.2- Heavy Elements in Toys Substrate Materials Total Lead Method (non-metallic materials): CPSC-CH-E1002-08.1 - Standard Operation Procedure for Determining Total Lead (Pb) in Non-Metal Children Product. Method (metal materials): CPSC-CH-E1001-8.1 - Standard Operating Procedure for Determining Total Lead (Pb) in Children’s Metal Products (Including Children’s Metal Jewelry). Analysis was performed by ICP-OES.
Test Items Lead (Pb) Conclusion
MDL 20 (Non metal) 50 (Metal) -
Result(s)
Total Limit (ppm)
1-21
22-23
N.D.
N.D.
100
PASS
PASS
-
Description : 1. Red plastic (body)
2.
Sky blue plastic (body)
3.
White rubber (bottom of body)
4.
Pink plastic (telephone)
5.
Yellow plastic (body)
6.
Yellow plastic (switch)
7.
Red plastic (house of animals)
8.
Blue plastic (door protection)
9.
Yellow plastic (dial)
10. Blue plastic (gear)
11. Blue plastic (inner dial)
12. Yellow green plastic (gear)
13. Red plastic (gear)
14. Red plastic (ball)
15. Blue plastic (ball)
16. Transparency plastic (ball)
17. Yellow green plastic (rabbit, prop)
18. Blue plastic (bear)
19. White plastic (door protection)
20. Transparency coating film
21. Sticker
22. Gold metal (house of animal, dial)
23. Silver metal (housepin) Note.
(1) N.D. = Not detected. (< MDL) (2) MDL = Method Detection Limit (3) The test part was selected by applicant’s request
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillanc
Test Report
No. F690101/LF-CTSAYHA15-06842R1
Issued Date : 2015. 07. 31
Page 6 of 7
Note *3 : Heavy Elements (Clause 4.3.5) ASTM F963-11, Clause 4.3.5.2- Heavy Elements in Toys Substrate Materials Soluble Heavy Metals Method : With reference to ASTM F963-11 Clause 8.3. Analysis was performed by
Element Limit MDL 1-21
Soluble Lead (Pb) 90 5 N. D.
Soluble Antimony (Sb) 60 5 N. D.
Soluble Arsenic (As) 25 2.5 N. D.
Results (Unit : mg/kg) Soluble Soluble Barium Cadmium (Ba) (Cd) 1000 75 10 5 N. D. N. D.
ICP-OES.
Soluble Chromium (Cr) 60 2.5 N. D.
Soluble Mercury (Hg) 60 2.5 N. D.
Soluble Selenium (Se) 500 10 N. D.
Mass of trace amount of sample no.19 = 87.1 mg, no.20 = 24.2 mg, no.21 = 82.6 mg Description : 1. Red plastic (body)
2.
Sky blue plastic (body)
3.
White rubber (bottom of body)
4.
Pink plastic (telephone)
5.
Yellow plastic (body)
6.
Yellow plastic (switch)
7.
Red plastic (house of animals)
8.
Blue plastic (door protection)
9.
Yellow plastic (dial)
10. Blue plastic (gear)
11. Blue plastic (inner dial)
12. Yellow green plastic (gear)
13. Red plastic (gear)
14. Red plastic (ball)
15. Blue plastic (ball)
16. Transparency plastic (ball)
17. Yellow green plastic (rabbit, prop)
18. Blue plastic (bear)
19. White plastic (door protection)
20. Transparency coating film
21. Sticker Note.
(1) N. D. = not detected (< MDL) (2) MDL = Method Detection Limit (3) Results shown are of the adjusted analytical result. (4) The test part was selected by applicant’s request
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillanc
Test Report
No. F690101/LF-CTSAYHA15-06842R1
Issued Date : 2015. 07. 31
Page 7 of 7
Picture of Sample as Received :
*** End of Report ***
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillanc
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 1 of 10
I&S CO., LTD. 172 Hojuk, Hwasanro, Oksanmyeon Cheongwongun, Chungbuk Korea The following sample(s) was/were submitted and identified by/on behalf of the client as:SGS File No.
:
AYHA15-06840R1
Sample Description
:
DWINGULER CASTLE
Detail of Sample
:
Plastic castle.
Style no./Item no.
:
-
Order No.
:
-
Packaging
:
Yes
Instructions for use/assembly
:
Yes
Buyer
:
-
Manufacturer
:
-
Country of Origin
:
-
Country of Destination
:
-
Labeled age grading
:
12 Months and over
Requested age
:
None
SGS assessed age (based on CR 14379/ASTM F963) :
All ages
Received Date
:
2015. 07. 01
Resubmitted Sample Date
:
2015. 07. 23
Test Period
:
2015. 07. 01
Test Method
:
For further details, please refer to following page (s)
Test Results
:
For further details, please refer to following page (s)
Supersedes /Referral
:
This test report supersedes previous report CTSAYHA15-06840” issued by SGS Korea.
Result Summary
:
to
2015. 07. 30
number,
“F690101/LF-
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Test Requested
Page 2 of 10
Conclusion
EN 71 Part 1:2014– Mechanical and Physical Properties
PASS
EN 71 Part 2:2011+A1:2014– Flammability of Toys
PASS
Labeling requirement ( Washing/Cleaning Label, CE mark, importer / manufacturer mark (name, address), product identification) according to the Directive 2009/48/EC-Safety of toys EN71-3:2013 + A1:2014 – Migration of certain elements
See note 1*
(By all conclusive testing)
(Selected specimen(s) was/were tested as specified by the applicant, please refer to test result page(s) for details.)
PASS
SGS Korea Co., Ltd.
Daesung Lee / Technical Manager
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 3 of 10
Test Conducted European Standard on Safety of Toys - Mechanical & Physical Properties As specified in European standard on safety of toys EN 71 Part 1:2014 Clause
Description
4
General requirements
Result -
4.1
Material cleanliness
Pass
4.7
Edges
Pass
4.8
Points and metallic wires
Pass
4.10
Parts moving against each other
Pass
4.14
Enclosure
Pass
5 5.1
Toys intended for children under 36 months
-
General requirements
Pass
5.1a
Pass
Small part requirements on toys & removable components (Test method 8.2)
5.1b
5.1c
Torque test(Test method 8.3)
Pass
Tension test(Test method 8.4)
Pass
Drop test(Test method 8.5)
Pass
Impact test(Test method 8.7)
Pass
Compression test(Test method 8.8)
Pass
Sharp edge(Test method 8.11)
Pass
Sharp point(Test method 8.12) Potential hazardous metal points and wires with a cross section of 2mm or less
Pass Pass
- Flammability of Toys As specified in European standard on safety of toys EN71 PART 2: 2011+A1:2014 Clause
Description
4.1
General requirements
Result Pass
N.B. : Only applicable clauses were shown.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 4 of 10
See note 1* Labeling requirement (Washing/Cleaning Label, CE mark, importer / manufacturer mark (name, address), product identification) according to the Directive 2009/48/EC-Safety of toys Summary table: Washing/Cleaning instruction CE mark Importer’s Name & Address Manufacturer’s Name & Address Product ID
Observation Result Absent Absent Absent Absent Absent
Location See note1 See note2 See note3 See note3 See note4
Note: 1.
According to Directive 2009/48/EC, a toy intended for use by children under 36 months must be designed and manufactured in such a way that it can be cleaned. A textile toy must, to this end, be washable, except if it contains a mechanism that may be damaged if soak washed. The manufacturer should, if applicable, provide instructions on how the toy has to be cleaned.
2.
CE marking should be visible from outside the packaging and its height must be at least 5mm.
3.
Manufacturer’s and Importer’s name, registered trade name or registered trade mark and the address at which the manufacturer can be contacted must be indicated on the toy or, where that is not possible, on its packaging or in a document accompanying the toy.
4.
Manufacturers must ensure that their toys bear a type, batch, serial or model number or other element allowing their identification, or where the size or nature of the toy does not allow it, that the required information is provided on the packaging or in a document accompanying the toy.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 5 of 10
Test Results : EN71-3:2013 + A1:2014 – Migration of certain elements Category III: Scrapped-off toy material Method : With reference to EN71-3:2013 + A1:2014. Analysis of general elements was performed by ICP-OES. Chromium (III) was obtained by calculation, chromium (VI) was analyzed by IC-UV/VIS. Organic Tin was analyzed by GC-MS.
Mass of trace amount
(mg)
--
--
--
Reporting Limit (mg/kg) --
Soluble Aluminium
(Al)
ND
ND
ND
50
70,000
Soluble Antimony
(Sb)
ND
ND
ND
10
560
Soluble Arsenic
(As)
ND
ND
ND
10
47
Soluble Barium
(Ba)
ND
ND
ND
50
18,750
Soluble Boron
(B)
ND
ND
ND
50
15,000
Soluble Cadmium
(Cd)
ND
ND
ND
5
17
Soluble Chromium
(Cr)
ND
ND
ND
0.15
--
Soluble Chromium (III)
(Cr (III))
ND
ND
ND
1
460
Soluble Chromium (VI)
(Cr (VI))
ND
ND
ND
0.18
0.2
Soluble Cobalt
(Co)
ND
ND
ND
10
130
Soluble Copper
(Cu)
ND
ND
ND
50
7,700
Soluble Lead
(Pb)
ND
ND
ND
10
160
Soluble Manganese
(Mn)
ND
ND
ND
50
15,000
Soluble Mercury
(Hg)
ND
ND
ND
10
94
Soluble Nickel
(Ni)
ND
ND
ND
10
930
Soluble Selenium
(Se)
ND
ND
ND
10
460
Soluble Strontium
(Sr)
ND
ND
ND
50
56,000
Soluble Tin
(Sn)
ND
ND
ND
4.9
180,000
Soluble Organic Tin
--
ND
ND
ND
--
12
Soluble Zinc
(Zn)
ND
ND
ND
50
46,000
PASS
PASS
PASS
--
--
Result (mg/kg) Test Item
Comment Sample Description : 1. Red plastic (body) 3. White rubber (bottom of body) 5. Yellow plastic (body) 7. Red plastic (house animal)
1-5
6
7
2. 4. 6.
Permissible Limit (mg/kg) --
Sky blue plastic (body) Pink plastic (telephone) Yellow plastic (switch)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 6 of 10
Test Results : EN71-3:2013 + A1:2014 – Migration of certain elements Category III: Scrapped-off toy material Method : With reference to EN71-3:2013 + A1:2014. Analysis of general elements was performed by ICP-OES. Chromium (III) was obtained by calculation, chromium (VI) was analyzed by IC-UV/VIS. Organic Tin was analyzed by GC-MS.
Mass of trace amount
(mg)
--
Reporting Limit (mg/kg) --
Soluble Aluminium
(Al)
ND
50
70,000
Soluble Antimony
(Sb)
ND
10
560
Soluble Arsenic
(As)
ND
10
47
Soluble Barium
(Ba)
ND
50
18,750
Soluble Boron
(B)
ND
50
15,000
Soluble Cadmium
(Cd)
ND
5
17
Soluble Chromium
(Cr)
ND
0.15
--
Soluble Chromium (III)
(Cr (III))
ND
1
460
Soluble Chromium (VI)
(Cr (VI))
ND
0.18
0.2
Soluble Cobalt
(Co)
ND
10
130
Soluble Copper
(Cu)
ND
50
7,700
Soluble Lead
(Pb)
ND
10
160
Soluble Manganese
(Mn)
ND
50
15,000
Soluble Mercury
(Hg)
ND
10
94
Soluble Nickel
(Ni)
ND
10
930
Soluble Selenium
(Se)
ND
10
460
Soluble Strontium
(Sr)
ND
50
56,000
Soluble Tin
(Sn)
ND
4.9
180,000
Soluble Organic Tin
--
ND
--
12
Soluble Zinc
(Zn)
ND
50
46,000
PASS
--
--
Result (mg/kg) Test Item
8-15
Comment Sample Description : 8. Blue plastic (door protection) 10. Blue plastic (gear) 12. Yellow plastic (gear) 14. Red plastic (ball)
9. 11. 13. 15.
Permissible Limit (mg/kg) --
Yellow plastic (dial) Blue plastic (inner dial) Red plastic (gear) Blue plastic (ball)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 7 of 10
Test Results : EN71-3:2013 + A1:2014 – Migration of certain elements Category III: Scrapped-off toy material Method : With reference to EN71-3:2013 + A1:2014. Analysis of general elements was performed by ICP-OES. Chromium (III) was obtained by calculation, chromium (VI) was analyzed by IC-UV/VIS. Organic Tin was analyzed by GC-MS.
Mass of trace amount
(mg)
--
--
--
--
Reporting Limit (mg/kg) --
Soluble Aluminium
(Al)
ND
ND
ND
ND
50
70,000
Soluble Antimony
(Sb)
ND
ND
ND
ND
10
560
Soluble Arsenic
(As)
ND
ND
ND
ND
10
47
Soluble Barium
(Ba)
ND
ND
ND
ND
50
18,750
Soluble Boron
(B)
ND
ND
ND
ND
50
15,000
Soluble Cadmium
(Cd)
ND
ND
ND
ND
5
17
Soluble Chromium
(Cr)
ND
ND
ND
ND
0.15
--
Soluble Chromium (III)
(Cr (III))
ND
ND
ND
ND
1
460
Soluble Chromium (VI)
(Cr (VI))
ND
ND
ND
ND
0.18
0.2
Soluble Cobalt
(Co)
ND
ND
ND
ND
10
130
Soluble Copper
(Cu)
ND
ND
ND
ND
50
7,700
Soluble Lead
(Pb)
ND
ND
ND
ND
10
160
Soluble Manganese
(Mn)
ND
ND
ND
ND
50
15,000
Soluble Mercury
(Hg)
ND
ND
ND
ND
10
94
Soluble Nickel
(Ni)
ND
ND
ND
ND
10
930
Soluble Selenium
(Se)
ND
ND
ND
ND
10
460
Soluble Strontium
(Sr)
ND
ND
ND
ND
50
56,000
Soluble Tin
(Sn)
ND
ND
ND
ND
4.9
180,000
Soluble Organic Tin
--
ND
ND
ND
ND
--
12
Soluble Zinc
(Zn)
ND
ND
ND
ND
50
46,000
PASS
PASS
PASS
PASS
--
--
Result (mg/kg) Test Item
Comment Sample Description : 16. Transparency plastic (ball) 18. Blue plastic (bear)
16
17
18
19
Permissible Limit (mg/kg) --
17. Yellow green plastic (rabbit, prop) 19. White plastic (door protection)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 8 of 10
Test Results : EN71-3:2013 + A1:2014 – Migration of certain elements Category III: Scrapped-off toy material Method : With reference to EN71-3:2013 + A1:2014. Analysis of general elements was performed by ICP-OES. Chromium (III) was obtained by calculation, chromium (VI) was analyzed by IC-UV/VIS. Organic Tin was analyzed by GC-MS.
Mass of trace amount
(mg)
38.4
97.8
12.8
Reporting Limit (mg/kg) --
Soluble Aluminium
(Al)
ND
ND
1,110
50
70,000
Soluble Antimony
(Sb)
ND
ND
ND
10
560
Soluble Arsenic
(As)
ND
ND
ND
10
47
Soluble Barium
(Ba)
ND
ND
1,070
50
18,750
Soluble Boron
(B)
ND
ND
ND
50
15,000
Soluble Cadmium
(Cd)
ND
ND
ND
5
17
Soluble Chromium
(Cr)
ND
0.45
4.39
0.15
--
Soluble Chromium (III)
(Cr (III))
ND
ND
ND
1
460
Soluble Chromium (VI)
(Cr (VI))
ND
ND
ND
0.18
0.2
Soluble Cobalt
(Co)
ND
ND
ND
10
130
Soluble Copper
(Cu)
ND
ND
ND
50
7,700
Soluble Lead
(Pb)
ND
ND
ND
10
160
Soluble Manganese
(Mn)
ND
ND
ND
50
15,000
Soluble Mercury
(Hg)
ND
ND
ND
10
94
Soluble Nickel
(Ni)
ND
ND
ND
10
930
Soluble Selenium
(Se)
ND
ND
ND
10
460
Soluble Strontium
(Sr)
ND
ND
ND
50
56,000
Soluble Tin
(Sn)
ND
ND
ND
4.9
180,000
Soluble Organic Tin
--
ND
ND
ND
--
12
Soluble Zinc
(Zn)
ND
ND
704
50
46,000
PASS
PASS
PASS
--
--
Result (mg/kg) Test Item
Comment Sample Description : 20. Transparency coating film (sticker) 22. Blue paint (door protection)
20
21
22
Permissible Limit (mg/kg) --
21. Sticker
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Test Item(s) Methyl tin Di-n-propyl tin Butyl tin Dibutyl tin Tributyl tin n-Octyl tin Tetrabutyl tin Diphenyl tin Di-n-octyl tin Triphenyl tin
(MeT) (DProT) (BuT) (DBT) (TBT) (MOT) (TeBT) (DPhT) (DOT) (TPhT)
Sample Description : 1. Red plastic (body) 3. White rubber (bottom of body) 5. Yellow plastic (body) 7. Red plastic (house animal) 9. Yellow plastic (dial) 11. Blue plastic (inner dial) 13. Red plastic (gear) 15. Blue plastic (ball) 17. Yellow green plastic (rabbit, prop) 19. White plastic (door protection) 21. Sticker Note.
Issued Date : 2015. 07. 31
Soluble Organic Tin Result(s) (mg/kg) 1-22 ND ND ND ND ND ND ND ND ND ND
2. 4. 6. 8. 10. 12. 14. 16. 18. 20. 22.
Page 9 of 10
MDL (mg/kg) 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Sky blue plastic (body) Pink plastic (telephone) Yellow plastic (switch) Blue plastic (door protection) Blue plastic (gear) Yellow plastic (gear) Red plastic (ball) Transparency plastic (ball) Blue plastic (bear) Transparency coating film (sticker) Blue paint (door protection)
1. mg/kg = milligram per kilogram 2. ND = Not Detected 3. 1% = 10000 mg/kg = 10000 ppm 4. The test part was selected by applicant’s request.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance
Test Report
No. F690101/LF-CTSAYHA15-06840R1
Issued Date : 2015. 07. 31
Page 10 of 10
Picture of Sample as Received :
*** End of Report ***
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-andConditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s). SGS Korea Co., Ltd.
322, The O valley, 76, LS-ro, Dongan-gu, Anyang-si, Gyeonggi-do, Korea 431-080 t +82 (0)31 4608 000 f +82 (0)31 4608 059 Http://www.sgslab.co.kr,www.kr.sgs.com/greenlab
F3104 Version 2 Member of the SGS Group (Société Générale de Surveillance