DYLAN CHARLES BURTON PORTFOLIO OF SELECTED WORK : architecture
2016 - 2019
DYLAN CHARLES BURTON Master
of
Architecture
Graduate
dylburton15@gmail.com (+27) 76 716 5381 Port Elizabeth, South Africa linkedin.com/in/dylanburton15 www.issuu.com/dylburton15
I have recently completed a Masters of Architecture (Professional) degree from the Nelson Mandela University in Port Elizabeth after completing my Bachelor of Architectural Studies at the same institution in 2017. I am currently seeking employment as a Candidate Architect to be able to register as a Professional Architect after completing the required SACAP candidate program. I am a self-motivated and determined individual with strong leadership skills. These skills are accompanied by good interpersonal communication skills, the ability to adapt to various situations as well as being cooperative in environments where efficient team work is essential. I have the ability to learn new skills at a fast pace and enjoy taking on a challenge in the pursuit to continue to grow as a young architect. While studying at Nelson Mandela University I was part of the Department of Architecture’s Orientation Team, a student assistant in various subjects as well as a student tutor during my final year of studies. I have also been part of a design-build project and a team leader for a design exhibition in my second year of undergraduate studies. I have the ambition to start my own firm in the future and my intention is to develop into a successful architect while contributing positively to any position that I am placed into and therefor; I humbly ask that you consider contacting me if there are any vacant positions in your company that you are looking to fill with a young and passionate aspiring architectural graduate.
Dylan Charles Burton
Page 2
TABLE OF CONTENTS
01 02 03 04
PROFILE
2
TABLE OF CONTENTS
3
CURRICULUM VITAE
4
AN INCLUSIVE HOUSING MODEL
9
THE CENTRAL SKILLS INCUBATOR
13
THE COSMIC AND INTANGIBLE
19
ECO-MODULE : IMPERMANENCE
23
STUDIO MAKE - EXHIBITION 2016
26
PALLADIO AND THE MODERN
28
AFRIKABURN - X
30
PHOTOGRAPHY
:2016
33
Page 3
DY L A N C H A R L E S
B U R T O N Master of Architecture Graduate 2nd Year Design Lecturer’s Assistant CONTACT DETAILS Framesby Port Elizabeth South Africa 6045
COMPUTER LITERACY
(+27) 041 360 1800 (+27) 076 716 5381
9607105434081 HOBBIES AND INTERESTS dylburton15@gmail.com
linkedin.com/in/dylanburton15
www.issuu.com/dylburton15
SKILLSET Public Speaking Leadership Cooperative Interpersonal Communication Adaptability Self-motivated
EXHIBITIONS AND INSTALLATIONS OVERVIEW 2016 - AFRIKABURN Meeting at “X” Design-Build 2016 - SECOND YEAR DESIGN STUDIO Tsitsikamma Hotel and Spa Exhibition The Sheathing of an [Un]Tamed Nature 2017 - PALLADIO AND THE MODERN Traveling Exhibition Jacobs House (1937), Frank Lloyd Wright Villa Barbaro (1560 - 1570), Andrea Palladio
Page 4
EDUCATION OVERVIEW GREY HIGH SCHOOL - 2010 - 2014 National Senior Certificate (NSC) NELSON MANDELA UNIVERSITY - 2015 - 2017 Bachelor of Architectural Studies (BAS) NELSON MANDELA UNIVERSITY - 2018 - 2019 Master of Architecture (Professional) (M.Arch)
CASUAL EMPLOYMENT HISTORY 2015 - 2018 : THE SCHOOL SHOP PTY LTD. Student Sales Assistant Duties Included: Sales Cashiering Customer Service 2015 - 2016 : PARK DRIVE BOWLING CLUB Barman Duties Included: Cashiering Customer Service 2020 - TO DATE : NELSON MANDELA UNIVERSITY: Department of Architecture Lecturer’s Assistant Duties Included: Assisting in the 2nd Year BAS Design Studio
GENERAL SOCIETIES Old Grey Union Shorin-Ryu Shorinkan South Africa LEADERSHIP St David’s Congregational Church: Core Leader (2012 - 2018) St. David’s Congregational Church: Junior Deacon Sunridge Park Karate Club: Instructor Charlo S & K Karate Club: Instructor SPORT Eastern Cape Karate Team Member 2010 - 2017 Okinawa Karate Tour Team Member 2015 3 rd Dan Senior Black Belt In Karate 2018
Page 5
DETAILED EDUCATION HISTORY - HIGH SCHOOL GREY HIGH SCHOOL - 2010 - 2014 National Senior Certificate (NSC) Subjects Passed: English Home Language Afrikaans Home Language Mathematics Life Sciences Physical Sciences History Life Orientation Leadership Positions: School Prefect Deputy Head Of Noaks House Student Officer (Cadet Detachment No. 33) Chairman: Student Christian Association Chairman: Presidents Award Society Senior Committee: Grey Union
Awards And Achievements: History: Prize Winner (2014) ICT Knowledge Network Level 5: Prize Winner (2013) ATKV Redenaars National Runner-Up (2014) Full School Colours: Service (2014) Full School Colours: Public Speaking (2014) Half School Colours: Academics (2013) 2013 English Olympiad: Bronze Award 2013 Bio-Science Olympiad: Gold Award 2014 English Olympiad: Bronze Award 2014 Port Elizabeth Afrikaans Arts Festival Gold Award 1 st Dan Senior Black Belt In Karate (2013) National Karate Champion: Unison (2013)
Bronze President’s Award Recipient (2014)
DETAILED EDUCATION HISTORY - UNDERGRADUATE DEGREE NELSON MANDELA UNIVERSITY - 2015 - 2017 Bachelor of Architectural Studies (BAS) Modules Passed: Design Architectural Presentation Techniques Building Science (Detail Design And Construction) History Of Architecture And Art Architectural Theory Building Science (Structures) Building Science (Environment & Services) Architectural Computer Usage Specifications Computing Fundamentals Site Surveying Geometric Drawing
Page 6
Leadership Positions: Student Assistant: 2 nd Year Presentation Techniques (2017 – 2018) Student Assistant: 3 rd Year Architectural Computer Usage (2017 –2018) Orientation Leader: How2@NMMU 2016 Project Leader: Tsitsikamma Exhibition 2016 Awards And Achievements: 2 nd Dan Senior Black Belt In Karate
DETAILED EDUCATION HISTORY - POST-GRADUATE DEGREE NELSON MANDELA UNIVERSITY - 2018 - 2019 Master Of Architecture (Professional) (M.Arch) Modules Passed: Design Professional Practice For Architects (ABA 402) Advanced Construction Architectural Theory And Sociology Urban Studies Commercial Law (Building Disciplines) A Commercial Law (Building Disciplines) C Property Economics For Architect Professional Practice For Architects (ABA501) Treatise Professional Practice For Architects (ABA 502) Architectural Theory And Research Urban Design And Urban Design Research Urban Studies
Leadership Positions: Orientation Leader: How2@Mandela 2018 Student Tutor: M.Arch First Year Design Studio
REFERENCES AVAILABLE UPON REQUEST EXTENDED PORTFOLIO OF WORK AVAILABLE UPON REQUEST
Page 7
02
PROJECT 01
Page 8
(5th Year Master’s Treatise Design Project 2019) Studio Masters: Andrew Palframan and Bryan Wintermeyer The Apartheid government initiated plans to have the residents of a diverse, cosmopolitan suburb removed and relocated to other areas of Port Elizabeth under the Group Area Act. As a result of this, almost the entire South End was demolished. This suburb has been redeveloped since its demolition and only a few traces of the horrific past are still evident in the suburb today. This treatise investigated ideas on identity, culture and place in order to establish an identity for the lost community of South End; which this treatise labeled as a “South End-ness.
The current proposal by the Mandela Bay Development Agency (MBDA) to develop a social housing scheme within the suburb was the driver behind an architectural product for this project. The MBDA proposal was thus critiqued and this critique was used as an objective standard from which to determine the appropriateness and relevance of this treatise. The aim of this treatise was therefore to produce an inclusive housing model for South End, rooted in a South End identity, which is relevant and appropriate. This was achieved through literature reviews, contextual analyses and precedent studies in order to find an appropriate strategy for designing an inclusive housing model in South End, Port Elizabeth.
AN INCLUSIVE HOUSING MODEL : design project
Page 9
PHASE 01: POTENTIAL DEVELOPMENT MODEL
DESK
SCALE 1 : 1 000
AUTO
PROPOSED SPATIAL PLAN STU
SECTION SECTIONB B-B-B
SECTION SECTIONC C- C- C
SCALE SCALE 1 : 100 1 : 100
SCALE SCALE 1 : 100 1 : 100
SECTION BSECTION -B B -B
SECTION CSECTION -C C-C
SCALE 1 : 100 SCALE 1 : 100
SCALE 1 : 100 SCALE 1 : 100
COLD-ROLLED COLD-ROLLED GALVANIZED GALVANIZED MILDMILD STEEL STEEL 64 64 X 32 X 32 mmmmC-SECTION C-SECTIONFIXED FIXEDTO TOPREMANUFACTURED PREMANUFACTURED GALVANIZED GALVANIZED MILDMILD STEEL STEEL TRUSS. TRUSS. 24mm 24mm ISOBOARD ISOBOARD INSULATION INSULATION TO BE TO FITTED BE FITTED BETWEEN BETWEEN C-SECTION C-SECTION ANDAND TRUSS. TRUSS. ISOBOARD ISOBOARD CEILING CEILING BOARD BOARD FIXED FIXED TOSTEEL TO 32 X3232 X TIMBER 32X TIMBER COLD-ROLLED GALVANIZED COLD-ROLLED MILD GALVANIZED 64 32MILD STEEL 64 X 32 BATTONS BATTONS IN ACCORDANCE IN ACCORDANCE WITH WITH MANUFACTURER’S MANUFACTURER’S mm C-SECTION FIXED mm TO C-SECTION PREMANUFACTURED FIXED TO PREMANUFACTURED SPECIFICATIONS SPECIFICATIONS WITH WITH CORNICES CORNICES PREMANUFACTURED GALVANIZED MILD STEEL GALVANIZED TRUSS.PREMANUFACTURED 24mm MILD STEEL ISOBOARD TRUSS. 24mm ISOBOARD INSULATION TOSHAPED BESHAPED FITTED INSULATION TO“D1”. C-SECTION BE“D1”. FITTED AND BETWEEN C-SECTION AND POLYHSTYRENE POLYHSTYRENE TO BETWEEN PROFILE TO PROFILE TRUSS.
TRUSS.
PREMANUFACTURED PREMANUFACTURED GALVANIZED GALVANIZED MILDMILD STEEL STEEL FRAME FRAME ISOBOARD CEILING BOARD ISOBOARD FIXEDCEILING TO 32 XBOARD 32 TIMBER FIXED TO 32 X 32 TIMBER FIXED FIXED TO TO BRICKWORK BRICKWORK IN ACCORDANCE IN ACCORDANCE WITH WITH ENGIENGIBATTONS IN ACCORDANCE BATTONS WITHINMANUFACTURER’S ACCORDANCE WITH MANUFACTURER’S NEER’S NEER’S SPECIFICATIONS SPECIFICATIONS ANDAND CLADDED CLADDED WITHKLIP-LOK WITHKLIP-LOK SPECIFICATIONS WITHSPECIFICATIONS CORNICES PREMANUFACTURED WITH CORNICES PREMANUFACTURED 700POLYHSTYRENE 700 PROFILE PROFILE SHEETING SHEETING EXTERNALLY EXTERNALLY WITH WITH 16mm “D1”. SHAPED POLYHSTYRENE TO PROFILE “D1”. SHAPED TO16mm PROFILE CHIPBOARD CHIPBOARD INTERNAL INTERNAL CLADDING CLADDING PREPPED PREPPED IN ACIN ACCORDANCE CORDANCE WITH WITH OWNER OWNER OR OR TENANTS TENANTS SPECIFICASPECIFICAPREMANUFACTURED GALVANIZED PREMANUFACTURED MILD STEEL GALVANIZED FRAME MILD STEEL FRAME FIXED TO BRICKWORKFIXED IN ACCORDANCE TO BRICKWORK WITHIN ENGIACCORDANCE WITH ENGITION TION SCHEDULE. SCHEDULE. NEER’S SPECIFICATIONSNEER’S AND CLADDED SPECIFICATIONS WITHKLIP-LOK AND CLADDED WITHKLIP-LOK 700 PROFILE SHEETING 700 EXTERNALLY PROFILE SHEETING WITH 16mm EXTERNALLY WITH 16mm CHIPBOARD INTERNALCHIPBOARD CLADDINGINTERNAL PREPPED CLADDING IN ACPREPPED IN ACCORDANCE WITH OWNER CORDANCE OR TENANTS WITH OWNER SPECIFICAOR TENANTS SPECIFICATION SCHEDULE. TION SCHEDULE.
DETAIL DETAILAA
0.5 0.5 mmmm KLIP-LOK KLIP-LOK 700700 PROFILE PROFILE SHEETING, SHEETING, FIXED FIXED TO TOSTEEL STEELINTERMEDIATE INTERMEDIATEPURLINS PURLINSSPACED SPACEDAT AT 12001200 mmmm CENTRE-TO-CENTRE CENTRE-TO-CENTRE USING USING KL700 KL700 CLIPS CLIPS IN INACCORDANCE ACCORDANCEWITH WITHTHETHEMANUFACTURER’S MANUFACTURER’S SPECIFICATIONS. SPECIFICATIONS. 0.5 mm KLIP-LOK 700 0.5 PROFILE mm KLIP-LOK SHEETING, 700 FIXED PROFILE SHEETING, FIXED TO STEEL INTERMEDIATE TO STEEL PURLINS INTERMEDIATE SPACED ATPURLINS SPACED AT 1200 mm CENTRE-TO-CENTRE 1200 mm USING CENTRE-TO-CENTRE KL700 CLIPS USING KL700 CLIPS IN ACCORDANCE WITH IN ACCORDANCE THE MANUFACTURER’S WITH THE MANUFACTURER’S SPECIFICATIONS. SPECIFICATIONS.
ALUMINIUM ALUMINIUM FRAMED FRAMED SINGLE SINGLE GLAED GLAED WINDOW WINDOW TO TO COMPLY COMPLY WITH WITH SANS SANS 10 400 10 400 XA AND XA AND TO BE TO FITTED BE FITTED IN IN ACCORDANCE ACCORDANCE WITH WITH ENGINEER’S ENGINEER’S SPECIFICATIONS. SPECIFICATIONS.
PREMANUFACTURED PREMANUFACTUREDGALVANIZED GALVANIZEDMETAL METALSTUD STUD FRAME FRAME MANUFACTURED MANUFACTURED OFF-SITE OFF-SITE ACCORDING ACCORDING TO TO ENGINEER’S ENGINEER’S SPECIFICATIONS. SPECIFICATIONS. INTERNAL INTERNAL CAVITITY CAVITITY TO TO BE FILLED BE FILLED WITH WITH LOSE-FILL LOSE-FILL THERMAL THERMAL INSULATION INSULATION WITH WITH KLIP-LOK KLIP-LOK 700700 PROFILE PROFILE SHETTING SHETTING FIXED FIXED WITH WITH K700 K700 KLIPS KLIPS TO TO COLD-ROLLED COLD-ROLLED GALVANIZED MILD-STEEL MILD-STEEL PREMANUFACTURED PREMANUFACTURED GALVANIZED METALGALVANIZED GALVANIZED STUD METAL STUD C-SECTIONS C-SECTIONS SPACED SPACED AT 1AT 200mm 1 200mm CENTRE-TO-CENTRE CENTRE-TO-CENTRE FRAME MANUFACTURED FRAME OFF-SITE MANUFACTURED ACCORDING OFF-SITE TO ACCORDING TO ENGINEER’S SPECIFICATIONS. ENGINEER’S INTERNAL SPECIFICATIONS. CAVITITY TO INTERNAL CAVITITY TO BE FILLED WITH LOSE-FILL BE FILLED THERMAL WITHINSULATION LOSE-FILL THERMAL WITH INSULATION WITH KLIP-LOK 700 PROFILEKLIP-LOK SHETTING 700FIXED PROFILE WITHSHETTING K700 FIXED WITH K700 KLIPS TO COLD-ROLLED KLIPS GALVANIZED TO COLD-ROLLED MILD-STEEL GALVANIZED MILD-STEEL C-SECTIONS SPACED ATC-SECTIONS 1 200mm CENTRE-TO-CENTRE SPACED AT 1 200mm CENTRE-TO-CENTRE
DETAIL DETAILB B
SCALE SCALE 1 : 10 1 : 10
DETAIL B DETAIL B
SCALE 1 : 10
SCALE 1 : 10
PRECINCT SECTION SCALE 1 : 200
Page 10
SCALE SCALE 1 : 10 1 : 10
DETAIL A DETAIL A SCALE 1 : 10
SCALE 1 : 10
ALUMINIUM FRAMEDALUMINIUM SINGLE GLAED FRAMED WINDOW SINGLETOGLAED WINDOW TO COMPLY WITH SANS 10 COMPLY 400 XAWITH ANDSANS TO BE10FITTED 400 XA IN AND TO BE FITTED IN ACCORDANCE WITH ENGINEER’S ACCORDANCE SPECIFICATIONS. WITH ENGINEER’S SPECIFICATIONS.
SECTION A -A SCALE 1 : 25
Page 11
02
PROJECT 02
Page 12
(4th Year Design Project 2018) Studio Masters: Bobhan Varghese and Graeme Eckley The Port Elizabeth city center is suffering from large scale urban decay that was caused by a variety of factors that included the mass exodus of businesses and households that had previously filled the once bustling precinct in the city’s not too distant past and as a result the city center is an isolated entity that is situated at the base of a natural escarpment and below the artificial freeways that were constructed in the 1960’s.
The site is situated along the base of the escarpment along Govan Mbeki Road and slopes down from the back of the site to the front by 13m and as such the site became a critical design constraint from the offset. The location of the site along Govan Mbeki Road is in close proximity to the Russel Road Taxi Rank and thus the site experiences a large amount of foot traffic daily and thus the architectural intervention would need to respond appropriately to this large amount of foot traffic. The project aimed to produce a catalytic architectural intervention that is responsive to the urban environment and contributes positively to the formation of an urban green corridor.
THE CENTRAL SKILLS INCUBATOR : design project
Page 13
Page 14
Page 15
DETAIL BB DETAIL SCALE 1:10 SCALE 1:10 0
DETAIL A SCALE 1:10 1m
0
2m
1m
2m
0
1m
2m
ONE LAYER DERBIGUM SP4 WATERPROOFING MEMBRANE, WITH 75MM SIDE LAPS AND 100MM END LAPS, SEALED TO PRIMED SURFACE TO FALLS AND CROSS FALLS BY 'TORCH-FUSION' FINISHED WITH ONE COAT OF ACRYLIC PRIMER FOLLOWED BY TWO COATS ACRYLIC PAINT. WATERPROOFING TO BE INSTALLED BY AN APPROVED DERBIGUM CONTRACTOR.
ISOBOARD ® HIGH DENSITY RIGID EXTRUDED POLYSTYRENE 100% CLOSED CELL INSULATION BOARDS 25MM THICK AND 600mm WIDE SHEETS TO BE FIXED CONCURRENT UNDER STEEL PURLINS.
ALUMINIUM FRAME GLAZING SYSTEM TO BE INSTALLED IN ACCORDANCE WITH SPECIALIST'S SPECIFICATIONS AND GLAZING TO COMPLY WITH SANS 10400 XA AND NBR's
DETAIL AA DETAIL SCALE 1:10 SCALE 1:10 0
1m
0
2m
1m
2m
STAINLESS STEEL POWDER COARED MESH PANELS FIXED FIXED TO ALUMINUM CLAMPS SLOTTED INTO 210mm x 80mm ALUMINUM MULLIONS SPACED 1500mm CENTRE TO CENTER FIXED TO STAINLESS STEEL SUBSTRUCTURE TO COMPLY WITH ENGINEER'S SPECIFICATIONS.
STAINLESS STEEL 650mm x 300mm CELLULAR I-SECTIONS SPACED AT 4500mm CENTER TO CENTER FIXED WITH CONNECTOR TO STRUCTURE TO MEET ENGINEER'S SPECIFICATIONS WITH GYPSUM CEILING SYSTEM WITH 12mm THICK PLASTERBOARD FIXED AT RIGHT ANGLES TO STEEL BRANDERING SUSPENSION BRACKETS FIXED TO TIE BEAMS AT 600mm CENTERS. CEILING PERIMETER TO BE FINISHED USING STANDARD WALL ANGLE
SAFETY GLASS BALUSTRADE TO SPECIALISTS SPECIFICATIONS WITH 75mm DIAMETER STAINLESS STEEL HANDRAIL TO COMPLY WITH NBR'S AND SANS 10 400.
PLANTER BOX TO HAVE ONE LAYER DERBIGUM CG3 AND ONE LAYER DERBIGUM CG4H WATERPROOFING MEMBRANE, WITH 100mm SIDE LAPS AND 150mm END LAPS, SEALED BY "TORCHFUSION" FOLLOWED BY 150 MICRON POLYTHENE SHEETING LOOSE LAID WITH 50mm LAPS SEALED WITH PRESSURE SENSITIVE TAPE, TO RECEIVE DRAINAGE LAYER OF DELTA MS8 TO VERTICAL AND DELTA MS20 TO HORIZONTAL SURFACES. WATERPROOFING TO BE INSTALLED BY APPROVED DERBIGUM CONTRACTOR.
STAINLESS STEEL I-SECTION COLUMNS TO ENGINEER'S SPECIFICATIONS AND DETAILING TO BE POWDER COATED.
PART WALL SECTION A - A SCALE 1:50 0m
1m
2m
Page 16
3m
4m
5m
Page 17
02
PROJECT 03
Page 18
(4th Year Design Project 2018) Studio Masters: Bobhan Varghese and Graeme Eckley Port Elizabeth is located along the edge of major migration routes of various marine animals and this explains the city’s historical connection to whaling and why it is considered to be the Bottlenose Dolphin capital of the world. The waters surrounding the Cape Recife Point act as a calfing bay for various whale species. This heritage focused project explored literature and ideas around intangible heritage values, natural / ecological heritage aspects and built heritage regulations in South Africa in order to create a design response that placed an emphasis on the findings.
The site is located within the Cape Recife Lighthouse precinct and is in a constant state of change that is determined by the natural environment. The site has limited human intervention and thus the natural order and processes form a main design informant for the project, for example; the sand dunes are in a state of constant change and the name “driftsands” is attributed to this effect and can be found on maps that label the empty southern part of Algoa Bay as the “driftsands”. The discovery of Khoisan fish-traps at Cape Recife Point had a monumental impact on the story of the Strandloper as these remains provided evidence that Port Elizabeth was the most easterly point of Strandloper habitation. The tangible remains of Khoisan inhabitants on site offered an opportunity to look critically at the intangible heritage that remains on site through three main ideas; the memory, the lifestyle and the relationship with the natural environment. The architectural intervention aimed to create a strong “sense of memory” that is in harmony with the natural systems that shape the site as well as provide a research station that is unobtrusive to the marine life as well as the natural environment.
THE COSMIC AND INTANGIBLE : design project
Page 19
Page 20
Page 21
02 PROJECT 04
Page 22
(4th Year Design Project 2018) Studio Masters: Bobhan Varghese and Graeme Eckley The Baakens Valley stretches from Port Elizabeth’s western suburbs to the city’s harbour on the east and is a strong ecological corridor for the city. A significant problem in the Baakens Valley is the high number of invasive alien plants that prevent the indigenous vegetation from thriving due to the copious amounts of water and nutrients these alien plants absorb as well as the fast growth rate that these plants experience. It was discovered that the invasive plant problem was not an isolated issue within one precinct of the Baakens Valley and as such the design intervention had to address the potential of a larger clearing area.
The focus of this project was placed on the ecological realm in the architectural discourse and as such literature written by Gary Grant was investigated to determine a key set if design informants that would respond to various ecosystem services. Furthermore, modular component design strategies were explored that would form the basis of a highly tectonic exploration for the project. The project aimed to produce a building that is totally self-sufficient, ecologically sensitive and able to be disassembled and relocated to a different predetermined location within the valley after the previous area of the valley has been cleared of alien vegetation.
ECO-MODULE : IMPERMANENCE : design project
Page 23
PR PRODUCE
N AUTODESK STUDENT VERSION NOTES CONTRACTORS TO CHECK ALL DIMENSIONS AND LEVELS ON SITE PRIOR TO MANUFACTURE OR CONSTRUCTION FIGURED DIMENSIONS TO BE IN PREFERENCE OFF SCALING OFF DRAWING
COMPONENT AND ASSEMBLY DRAWING C (70) 03
ALL WORK TO BE CARRIED OUT IN ACCORDANCE WITH LOCAL AUTHORITY REGULATIONS
COMPONENT AND ASSEMBLY DRAWING C (70) 03
ANY ERRORS OR DISCREPANCIES TO BE REPORTED IMMEDIATELY FOR CLARIFICATION PRIOR TO ANY WORK BEING UNDERTAKEN ALL CAVITY WALLS BELOW FOUNDATION TO BE FILLED WITH CEMENT IF REQUIRED LEVELS INDICATED ARE PROVISIONAL AND MUST BE CHECKED ON SITE REFERRING TO TOP OF FOUNDATION. THE STRENGTH OF THE CONCRETE MIX TO BE MINIMUM OF 15mpa
GENERAL NOTES 1.
ALL PLUMBING TO BE BUILT INTO WALLS WHERE EXPOSED. ALL DRAINAGE LINES INDICATED ARE DIAGRAMMATIC 3. POSITION AND DETAIL OF BRICK MOVEMENT JOINT IS TO BE CONFIRMED WITH THE ARCHITECT BEFORE COMMENCING CONSTRUCTION 4. ALLOW 40mm IN TOTAL FOR FLOOR FINISH AND SCREED. 5. SCREED THICKNESS TO BE ADJUSTED TO ALLOW FOR EVEN TRANSITION BETWEEN FLOORS OF DIFFERING FINISHES. 6. WALL TIES TO BE GALVANIZED MILD STEEL. 7. REFER TO FINISHES SCHEDULE AND DETAIL DRAWINGS FOR DETAILS OF FLOOR FINISHES AND WATERPROOFING DETAILS TO ALL PLANTER BOXES AND PARAPET WALLS. 8. ALL BUILT IN CUPBOARDS AND FITTINGS AS PER DETAIL DRAWINGS BY EXPERT. 9. ALL GLAZING TO DOORS AND WINDOWS TO COMPLY WITH SANS 0137 CODES OF PRACTICE 10. FINAL EARTHWORKS AND LEVELS TO BE CHECKED AND CONFIRMED ON SITE. 2.
K
L
M
PRODUCED BY AN AUTODESK STUDENT VERSION
SCALE 1:10
ARCHITECT'S SIGNATURE: DATE: CLIENT'S SIGNATURE: DATE:
DETAIL DETAIL A AD DETAIL SCALE 1:101:50 SCALE 1:10 SCALE
C N
DRAWING NUMBER
C
D O
D
PRODUCED BY AN AUTODESK STUDENT VERSION
DETAIL C
PRODUCED BY AN AUTODESK STUDENT VERSION
REVISION
DETAIL DETAIL B B SCALE SCALE 1:10 1:10
E
P
E
F
ALIEN VEGETATION ERADICATION AND PROCESSING PLANT F
G
G
H
H
I
I
J
PROPOSED SECTION A - A
25 150mm GUM POLE LEVEL 4
THE DESIGN OF AN ALIEN VEGETATION ERADICATION AND PROCESSING PLANT IN THE BAAKENS VALLEY, PORT ELIZABETH BAAKENS VALLEY PORT ELIZABETH
Y DRAWING C (70) 03
COMPONENT AND ASSEMBLY DRAWING C (70) 03 COMPONENT AND ASSEMBLY DRAWING C (70) 03
COMPONENT AND ASSEMBLY DRAWING C (70) 01 COMPONENT AND ASSEMBLY DRAWING C (70) 01
Page 24
18 950mm GUM POLE LEVEL 3
PROJECT NAME: PROJECT NUMBER: ARCHITECT: SACAP NUMBER:
ECO-MODULE 001 DYLAN BURTON 1007
COMPONENT AND ASSEMBLY DRAWING C (70) 02 COMPONENT AND ASSEMBLY DRAWING C (70) 02
COM
Page 25
03
PROJECT 01 (2nd Year Design Project 2016) Studio Masters: John Andrews and Barry Bradley The second year design studio was given a brief to design a 5-star boutique hotel and spa in the Tsitsikamma nature reserve in the Eastern Cape of South Africa. Four of the student designs were then selected and developed further to present at an exhibition in Port Elizabeth at the end of 2016. The exhibition presented a set of presentation drawings, concept models and final design models. My design was selected as one of the four student works that would be developed and as such I was selected as a team leader in this exhibition project.
The project attempted to “touched the earth lightly” as well as appear in harmony with nature through a selection of natural materials while contrasting the natural landscape through a rigid and highly geometric form. The wrapping of space allowed an intimate connection with the rock to occur where the visitor to the building would find themselves living on top of the rock, next to the rock and floating above the rock . The natural materials further aimed to contrast the hard nature of the rock formation.
The project titled “The Sheathing of an [Un]tamed Nature” aimed to wrap around and over a linear rock outcrop that protruded into the Indian ocean that was conceptually a single sheet of paper that was folded in numerous ways to create varieties in space that ranged from very inside to extremely outside.
STUDIO MAKE - EXHIBITION 2016 : tsitsikamma exhibition
Page 26
Page 27
03
PROJECT 02
(1st Year Design Project 2015) Studio Master: Ernst Struwig The first year design studio under Ernst Struwig undertook a research program in architectural composition from 2013 to 2015. The research program presented 36 villas of the renaissance architect Adrea Palladio (1508 - 1580) and the 36 houses from international and national architects from the 20th and 21st centuries which reflect on the similarities and differences of work from different centuries placed in direct conversation through 432 exhibition pieces which are all realised by hand. (Adapted University
from Department
Nelson of
The modernist work is an investigation of Frank Lloyd Wright’s Jacobs House (1937). The work exhibited included a plan and elevation drawing in pen, an axonometric drawing in pen, a compositional study in pen and a plan and elevation model constructed in grey cardboard that was painted.
Mandela Architecture)
The Palladian Villa presented is a type of ideal Villa design that Villa Barbaro (1560 - 1570) was based on. The work included a plan and elevation drawing in pencil, a volumetric axonometric drawing in pencil, a compositional investigation in pen and a plan and elevation model constructed in grey cardboard.
PALLADIO AND THE MODERN : 2017 traveling exhibition
Page 28
Page 29
03
PROJECT 03
(2nd Year Design Project 2016) Master in Charge: John Andrews X = PLACE The 2nd year design class at the Nelson Mandela University Department of Architecture had put together an installation for the Afrikaburn Arts Festival. The architectural content explored the issue of separation and place in architecture. The installation consisted of a dividing wall (made from hessian fabric and manila rope), which separated a forest of paper tubes. When the artifact was burnt the wall fell, selected paper tubes burnt and finally the remainder of the forest was illuminated, and revealed a circular space concerned with gathering and unity.
A tensile approach was selected because of its portability and structural efficiency. The materials were then further informed by cost, environmental impact, expression and “burnability”. In the detailing process of the project it was decided to produce a steel-less construction (no bolts, no nuts, no washers, no screws) which creates a structure that is entirely burnable, with the intention of leaving no trace. (Adapted from Nelson Mandela University Department of Architecture 2016)
What was once a condition of separation becomes a condition of place through the process of burning.........X marks the spot.
AFRIKABURN - X :2016 : meeting @ “x”
Page 30
Page 31
04
Page 32
PHOTOGRAPHY : 2016 - 2019
Page 33
Page 34
Page 35
Page 36
Page 37
DYLAN CHARLES BURTON
Architectural Portfolio www.issuu.com/dylburton15 www.linkedin.com/in/dylanburton15 @dylburton15