Pleasereadthismanualcarefullyanddo notusethispistoluntilyouhavefully understoodallthesafetyinstructionsand itshandlingprocedures.If yourequire furtherinformation,donothesitateto contact support.
SAFETY RULES
WARNINGS
TECHNICAL SPECIFICATIONS
MAIN COMPONENTS
OPERATION PRINCIPLES
MAINTENANCE
TROUBLESHOOTING
WARRANTY
FOLLOWING THESE SAFETY RULES CAN SAVE YOUR LIFE OR THE LIFE OF SOMEONE ELSE
DO NOT LOAD THIS PISTOL UNTIL YOU UNDERSTAND HOW IT OPERATES.
YOU RISK PERSONAL INJURY OR DEATH BY HANDLING THIS FIREARM DISCLAIMER OF LIABILITY
MANUFACTURER’S WARNING
THE GUN OWNER MUST ACCEPT FULL RESPONSIBILITY FORTHECORRECT REASSEMBLYAND FUNCTIONING OF THE FIREARM AFTER ANY DISASSEMBLY OR REPLACEMENT OFPARTS. TOCLEANANDMAINTAINYOUR PISTOL: A) B)
DANGER – AMMUNITION WARNING
WARNING EYE AND EAR PROTECTION
AMMUNITION (CARTRIDGES) NOTICE
WARNING(POTENTIAL OBSTRUCTIONS)BEFORE LOADING WARNING -
DO NOT ATTEMPT TO SHOOT IT OUT WITH ANOTHER CARTRIDGE, OR BLOW IT OUTWITH A BLANK CARTRIDGE OR A CARTRIDGE FROM WHICH THE BULLET HAS BEEN REMOVED. SUCH TECHNIQUE(S) CAN GENERATE EXCESSIVE PRESSURE, DAMAGE THE FIREARM AND CAUSE SERIOUS PERSONAL INJURY
WARNING(Mechanical Malfunctions) -STOP SHOOTING IMMEDIATELY ANDUNLOAD YOUR FIREARM
LOADING THE MAGAZINE: CAUTION!!
1
Figure 1 TO LOAD THE PISTOL BY USING BARREL LEVER / TipUp
Lever:
3
4
The pistol is now chamber loaded, ready to be fired by trigger pull if the safety is disengaged
TO LOAD THE PISTOL BY SLIDE MANIPULATION:
SAFETY/FULLY-COCKED HAMMER RELATIONSHIP:
Figure 19
SAFETY/FULLY-LOWERED HAMMER RELATIONSHIP:
20
SAFETY/HALF-COCKED
HAMMER RELATIONSHIP:
21
DOUBLE ACTION TRIGGER PULL:
SINGLE ACTION TRIGGER PULL:
24
MISFIRE AND/ORHANG-FIRE:
JAMMING/MALFUNCTIONING:
DISASSEMBLY:
NOTE:
1)MAGAZINE RELEASE
2)MAGAZINE RELEASE SPRING SOCKET
3)MAGAZINE RELEASE EXTRACTOR
4)MAGAZINE RELEASE SPRING
5)GRIP INSERT
6)GRIP INSERT FIXING PIN
7)GRIP SCREW
8)HAMMER STRUT SPRING
9)HAMMER STRUT
10)HAMMER PIN
11)HAMMER CATCH SPRING
12)HAMMER CATCH PIN
13)SEAR
14)HAMMER
15)REAR SIGHT
16)SAFETY LEVER
17)RIGHT SAFETY LEVER
18)FIRING PIN
19)FIRING PIN FIXING PIN
20)FIRING PIN SPRING
22)CARTRIDGE LAUNCHER AND HAMMER CATCH SPRING FIXING PIN
23)CARTRIDGE LAUNCHER FIXING PIN
24)TRIGGER SPRING
25)BARREL LATCH LEVER
26)BARREL
27)BARREL LATCH DETENT
28)BARREL LATCH FIXING PIN
29)BARREL LATCH DETENT SPRING
30)BARREL FIXING PIN
31)BARREL FIXING PIN PUSHING
32)SLIDE
33)TRIGGER BAR
34)TRIGGER BAR SPRING
35)A RIGHT GRIP PANEL
36)B LEFT GRIP PANEL
37)BADGE RIGHT LOGO
38)BADGE LEFT LOGO
39)FRAME
40)TRIGGER
41)GRIP SCREW BUSHINGS
42)SAFETY LEVER PIN
43)SAFETY LEVER PIN SPRING
44)RECOIL SPRING
45)RECOIL SPRING GUIDE
46)SLIDE CATCH
47)SLIDE CATCH SPRING
48)BARREL LATCH LEVER FIXING PIN
49)BARREL LATCH SPRING
50)BARREL LATCH RESTRICH FERRULE
51)BARREL LATCH SPRING FIXING PIN
52)HELIX PIN
53)PIN SAFETY BLOCK
54)PIN SAFETY BLOCK SPRING
55)TRIGGER BAR SUPPORTER
56)PIN SAFETY BLOCK LEVER
57)PIN SAFETY BLOCK LEVER SPRING
58)MAGAZINE
1)MAGAZINE RELEASE
2)MAGAZINE RELEASE SPRING SOCKET
3)MAGAZINE RELEASE EXTRACTOR
4)MAGAZINE RELEASE SPRING
5)GRIP INSERT
6)GRIP INSERT FIXING PIN
7)GRIP SCREW
8)HAMMER STRUT SPRING
9)HAMMER STRUT
10)HAMMER PIN
11)HAMMER CATCH SPRING
12)HAMMER CATCH PIN
13)SEAR
14)HAMMER
15)REAR SIGHT
16)SAFETY LEVER
17)RIGHT SAFETY LEVER
18)FIRING PIN
19)FIRING PIN FIXING PIN
20)FIRING PIN SPRING
21)CARTRIDGE LAUNCHER
22)CARTRIDGE LAUNCHER AND HAMMER CATCH SPRING FIXING PIN
23)CARTRIDGE LAUNCHER FIXING PIN
24)TRIGGER SPRING
25)BARREL LATCH LEVER
26)BARREL
27)BARREL LATCH DETENT
28)BARREL LATCH FIXING PIN
29)BARREL LATCH DETENT SPRING
30)BARREL FIXING PIN
31)BARREL FIXING PIN PUSHING
32)SLIDE
33)TRIGGER BAR
34)TRIGGER BAR SPRING
35)A RIGHT GRIP PANEL
36)B LEFT GRIP PANEL
37)BADGE RIGHT LOGO
38)BADGE LEFT LOGO
39)FRAME
40)TRIGGER
41)GRIP SCREW BUSHINGS
42)SAFETY LEVER PIN
43)SAFETY LEVER PIN SPRING
44)RECOIL SPRING
45)RECOIL SPRING GUIDE
46)SLIDE CATCH
47)SLIDE CATCH SPRING
48)BARREL LATCH LEVER FIXING PIN
49)BARREL LATCH SPRING
50)BARREL LATCH RESTRICH FERRULE
51)BARREL LATCH SPRING FIXING PIN
52)HELIX PIN
53)PIN SAFETY BLOCK
54)PIN SAFETY BLOCK SPRING
55)TRIGGER BAR SUPPORTER
56)PIN SAFETY BLOCK LEVER
57)PIN SAFETY BLOCK LEVER SPRING
58)SILENCER BARREL PLUG
59)MAGAZINE
MANUFACTURER
