BASE SIZES
Single Slope Roof
Pricing shown is for Risk Category I/Wind Exposure B. Please call for Risk Category II/Wind Exposure C options.
STANDARD FEATURES Rated for 35PSF-140MPH (3 second gusts, not sustained)
Standard single slope roof features include the following: 14 gauge galvanized steel framing, 29 gauge metal roofing with 20 year Beckers paint system, framing spaced 5’ on center. Single slope packages include both peak and leg bracing for additional strength and stability. Concrete anchors and rebar anchors are included in base prices for units, for ground installations on units 12’-24’ wide add Earth Auger Anchor Package. Base leg heights vary by size, see above for details. Note: frame build varies by width and leg height. Dual tube rafter used for 18’ to 24’ wide units. Eagle Carports, Inc. is not responsible for stopping, or repairing leaks under base rails. Please note: Eagle Carports, Inc. does not provide site work. Customers are required to contact local building/zoning departments about codes for permitting purposes before order finalization.
25’ 24’ 11’ 7’
Example shown: 24x25x11x7
AL, AR, GA, IN, KY, LA, MO, MS, NC, OK, SC, TN, TX, VA We accept all major credit cards.
SCAN FOR MORE INFO! © 2024 Copyright All Rights Reserved Eagle Carports, Inc. All prices are subject to change without notice 2.12.2024 20 YEAR *Warranty covers paint fade and chalking. Paint Warranty On roofing materials. TM
12x20x9x7 14x20x10x7 16x20x10x7 *18x20x10x7 *20x20x11x7 *22x20x11x7 *24x20x11x7 $2,265 $2,745 $2,935 $2,975 $3,245 $3,485 $3,725 $1,665 $2,095 $2,235 $2,375 $2,645 $2,885 $3,125 12x26x9x7 14x26x10x7 16x26x10x7 *18x26x10x7 *20x26x11x7 *22x26x11x7 *24x26x11x7 $2,780 $3,315 $3,500 $3,680 $3,970 $4,220 $4,470 $2,680 $2,830 $2,980 $3,270 $3,520 $3,770 12x30x9x7 14x30x10x7 16x30x10x7 *18x30x10x7 *20x30x11x7 *22x30x11x7 *24x30x11x7 $3,245 $3,880 $4,105 $4,335 $4,645 $4,905 $5,165 $2,645 $3,215 $3,375 $3,535 $3,845 $4,105 $4,365 12x35x9x7 14x35x10x7 16x35x10x7 *18x35x10x7 *20x35x11x7 *22x35x11x7 *24x35x11x7 $3,660 $4,400 $4,670 $4,940 $5,370 $5,740 $6,110 $3,060 $3,800 $3,970 $4,140 $4,470 $4,740 $5,010 12x40x9x7 14x40x10x7 16x40x10x7 *18x40x10x7 *20x40x11x7 *22x40x11x7 *24x40x11x7 $4,125 $4,970 $5,285 $5,595 $6,145 $6,675 $7,205 12x45x9x7 14x45x10x7 16x45x10x7 *18x45x10x7 *20x45x11x7 *22x45x11x7 *24x45x11x7 $4,790 $5,770 $6,160 $6,550 $7,120 $7,660 $8,200 12x50x9x7 14x50x10x7 16x50x10x7 *18x50x10x7 *20x50x11x7 *22x50x11x7 *24x50x11x7 $5,205 $6,355 $6,755 $7,155 $7,745 $8,295 $8,845 2’ Roof Diff 3’ Roof Diff 4’ Roof Diff Vert. Vert. Vert. Vert. Vert. Vert. Vert. Box. Box. Box. Box. Box. Box. Box. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Box. Box. Box. Box. Box. Box. Box. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Box. Box. Box. Box. Box. Box. Box. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Box. Box. Box. Box. Box. Box. Box. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. Vert. 90 DAY WORKMANSHIP WARRANTY! INSTALLATION INCLUDED! ( On your level lot - Restrictions apply) FINANCING & RTO AVAILABLE! FREE EAGLE EMBLEM ! W/PURCHASE OF GABLE END OR CLOSED END NEW FEATURE! 1’ PERIMETER OVERHANG!* 20’ 20’ 25’ 25’ PERIMETER X $10 = OVERHANG CHARGE *Not available on commercial buildings. 20 + 20 + 25+ 25= PERIMETER - All cement pads must have turn down footers. - Price does not include site preparation. - Lot must be cleared and leveled prior to installation. EXAMPLE: Perimeter = 90’ x $10 per foot = $900
Prices effective 2.12.2024
↑
Flush mount kits allow cement pads to be the exact width and length of the building without requiring a 2” perimeter.
EXTRA PANELS
LENGTH PRICE *J-TRIM
20’ $100 Add $75
25’ $125 Add $90
30’ $150 Add $105
**35’ $175 Add $120
**40’ $200 Add $135
**45’ $225 Add $150
**50’ $250 Add $165
*J-Trim price covers both sides
**Not a continuous panel
6’x7’ $600
8’x8’ $800
9’x8’ $850
10’x8’ $950
10’x10’ $1,200
12’x12’ $2,200
*14’x14’ $3,000
WALK-IN DOORS - 36”X80”
MHD:Right H. Outswing | RD: Right H. Inswing MOBILE HOME DOOR $400 9 LIGHT STEEL DOOR $650* *Special Order item. ONLY available to install on cement.
WINDOWS White with Grid 24”x36” 30”x36” $200 $220
GABLE ON END Priced Per End
For Vertical Gable multiply price by 1.5, for Extended Gable multiply by 2. 12’ W 18’ W 20’ W 22’ W 24’ W $175 EA. $275 EA. $300 EA. $325 EA. $350 EA.
*Extended Gables have an additional 3’ of coverage.
TRIMMED HALF PANELS 12’ - 30’
Kit made for both sides. Package price cannot be halved.
20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L $175 $205 $235 $275 $320 $400 $430
CORNER KIT Must add Gable Legs 6’ - 8’ Legs 9’ - 12’ Legs 13’ - 16’ $225 $375 $525
2’ wide max on each side. Must pair with gable.
FRAME OUTS
Use for framing of customer provided windows & doors
WINDOW WALK-IN DOOR $70 $85
STANDARD HEADERS / LARGE OPENINGS UNITS 12’ - 30’ OPENINGS ONLY OPENING WITH DOOR
* Pricing Includes double legs for added strength and stability. 15’ - 16’ tall require lift for installation.
CLOSE ONE SIDE NOTE: Must add pricing for each side individually
ELECTRIC GARAGE DOOR OPENER KIT
Per Door $950
NOT COMPATIBLE WITH WINDLOCK DOORS, OR 12-14’ WIDE DOORS & REMOTE INCLUDED
*Special order door, lift required for installation 45o TRIM KIT
Garage Door or Frame Out Add-on
PER OPENING $100
Must close end or side
ON END 6’-16’ OPENING $125 ON END 6’-12’ OPENING $0
ON SIDE 6’-12’ OPENING $225 ON END 13’-14’ OPENING $125
ON SIDE 13’-16’ OPENING $300 ON SIDE 6’-12’ OPENING $125
ON SIDE 13’-14’ OPENING $200
*Side must be 1’ taller than desired door height. 14’x14’ requires 2 foot taller
HORIZONTAL WAINSCOTING
Not available on 6’ tall buildings. Price is $9/ft x Perimeter on buildings with 10’ and 7’ eaves.
SIDE CONNECTION FEES Per Side
20’
height by length by 2. Ex. 26’ long x 10’ tall 10 x 26 = 260 x 2 = 520 sf x $/per SF
ENDS: Add 1.5 to leg height, multiply by building width. Ex. 24’ wide x 10’ tall 11.5 x 24 = 276 x 2 = 552 sf x $/per SF
OPTIONAL FEATURES FOR SINGLE SLOPE
WELDED TRUSS UPGRADE 18’ - 24’ 20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L 6’ TRUSS FOR 18-24’ WIDTHS $200 $250 $300 $350 $400 $450 $500 LEAN TO CONNECTION FEES On End 12’ - 22’ Wide 24’ Wide $300 $400 ADDITIONAL LABOR FEES 20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L BUILD OVER FEE $150 $175 $200 $250 $275 $325 $350 CUT LEGS ON SITE* $100 $125 $150 $175 $200 $225 $250 *Cut leg fee has a maximum of 12” adjustment possible, either front to back or side to side. Please note, side to side on level lots will result in gap underneath garage doors. INSULATION DOUBLE BUBBLE TYPE (MOISTURE BARRIER) R5 $1.50 SF 2” FIBERGLASS R7 $2.25 SF ROOF (Vertical Only): Add 2’ to width and multiply by length. Ex. 24’ wide x 26’ long 26 x 26 = 676 SF x $/per SF SIDES: Multiply leg
BUILDINGS
L 45’ L 50’ L $120 $140 $160 $180
L 25’ L 30’ L 35’ L 40’
$200 $220 $240
EXTRA RAFTERS/ BOWS 12’ - 24’ W ADDITIONAL HEIGHT $275 EA. 6’ standard incl. $20 per foot up to 14’ tall. LEG PRICING PER BUILDING WIDTH & LENGTH 12’ Wide Base Eave Heights are 9’ & 7’ HEIGHT 20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L ↑10’ & 8’ $180 $240 $300 $360 $420 $480 $540 ↑11’ & 9’ $240 $320 $400 $480 $560 $640 $720 ↑12’ & 10’ $300 $400 $500 $600 $700 $800 $900 14’-18’ Wide Base Eave Heights are 10’ & 7’ HEIGHT 20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L ↑11’ & 8’ $210 $280 $350 $420 $490 $560 $630 ↑12’ & 9’ $270 $360 $450 $540 $630 $720 $810 ↑13’ & 10’* $850 $1,075 $1,250 $1,500 $1,750 $1,975 $2,200 ↑14’ & 11’* $925 $1,150 $1,350 $1,588 $1,825 $2,050 $2,275 ↑15’ & 12’* $1,000 $1,225 $1,450 $1,675 $1,900 $2,125 $2,350 ↑16’ & 13’* $1,100 $1,325 $1,550 $1,775 $2,000 $2,225 $2,450 20’ - 24’ Wide Base Eave Heights are 11’ & 7’ HEIGHT 20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L ↑12’ & 8’ $240 $320 $400 $480 $560 $640 $720
13’ & 9’* $825 $1,050 $1,200 $1,463 $1,725 $1,950 $2,175 ↑14’ & 10’* $900 $1,125 $1,300 $1,550 $1,800 $2,025 $2,250 ↑15’ & 11’* $975 $1,200 $1,400 $1,638 $1,875 $2,100 $2,325
16’ & 12’* $1,050 $1,275 $1,500 $1,725 $1,950 $2,175 $2,400
↑
HEIGHT 20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L 7’ $338 $400 $463 $525 $588 $650 $713 8’ $363 $438 $513 $588 $663 $738 $813 9’ $363 $438 $513 $588 $663 $738 $813 10’ $425 $513 $600 $688 $775 $863 $950 11’ $458 $558 $658 $758 $858 $958 $1,058 12’ $458 $558 $658 $758 $858 $958 $1,058 13’ $550 $663 $775 $888 $1,000 $1,113 $1,225 14’ $590 $715 $840 $965 $1,090 $1,215 $1,340 14' vert $850 $1,063 $1,275 $1,488 $1,700 $1,913 $2,125 *15’ vert. $950 $1,175 $1,400 $1,625 $1,850 $2,075 $2,300 *16’ vert. $170 $213 $255 $298 $340 $383 $425 V. Siding Add 6’ - 10’ Per Side $243 $303 $363 $423 $483 $543 $603 V. Siding Add 7’ - 13’ Per Side $285 $355 $425 $495 $565 $495 $565 Vertical Wainscoting $160 $200 $240 $280 $320 $360 $400 NOTE: If tall side exceeds 14’ tall the short side must be vertical as well. ONE END CLOSED Per End 12’ WIDE 14’ WIDE 16’ WIDE 18’ WIDE 20’ WIDE 22’ WIDE 24’ WIDE HEIGHTS PRICE HEIGHTS PRICE HEIGHTS PRICE HEIGHTS PRICE HEIGHTS PRICE HEIGHTS PRICE HEIGHTS PRICE 9’ & 7’ $585 10’ & 7’ $705 10’ & 7’ $795 10’ & 7’ $890 11’ & 7’ $995 11’ & 7’ $1,090 11’ & 7’ $1,185 10’ & 8’ $615 11’ & 8’ $715 11’ & 8’ $810 11’ & 8’ $905 12’ & 8’ $1,025 12’ & 8’ $1,125 12’ & 8’ $1,220 11’ & 9’ $630 12’ & 9’ $740 12’ & 9’ $840 12’ & 9’ $935 13’ & 9’ $1,110 13’ & 9’ $1,215 13’ & 9’ $1,320 12’ & 10’ $670 13’ & 10’ $830 13’ & 10’ $940 13’ & 10’ $1,055 14’ & 10’ $1,185 14’ & 10’ $1,300 14’ & 10’ $1,415 14’ & 11’ $850 14’ & 11’ $965 14’ & 11’ $1,080 *15’ & 11’ $1,265 *15’ & 11’ $1,525 *15’ & 11’ $1,655 *15’ & 12’ $1,160 *15’ & 12’ $1,290 *16’ & 12’ $1,520 *16’ & 12’ $1,725 *16’ & 12’ $1,875 *16’ & 13’ $1,290 *16’ & 13’ $1,445
includes vertical siding © 2024 Copyright All Rights Reserved Eagle Carports, Inc. All prices are subject to change without notice.
*Pricing
OPTIONS 20’ L 25’ L 30’ L 35’ L 40’ L 45’ L 50’ L FLUSH MOUNT CONCRETE KIT $400 $440 $480 $520 $560 $600 $640
DIMENSIONS All stated dimensions are in reference to the frame size, not the roof dimensions. With Flush Mount Kit Without Flush
Kit Cement pads do not require additional width. All
Ex. 20’ x 30’ unit will
20’x 30’
Ex. 20’
30’
20’4”
30’4” pad.
UP GARAGE DOORS
CONCRETE
Mount
cement pads require 2” wider on all sides.
need a
pad.
x
unit will need a
x
ROLL
