MF SERIES BELT FRYER MASTER FRYER with EXTERNAL HEATING SYSTEM
MASTER FRYER with EXTERNAL HEATING SYSTEM
Specialty: 1. Multi-Food can be fried. Both Float and Sink Food can be fried. 2. Precise Control on the frying time and temperature. Ensure the fried food can be first in and first out. 3. Easy to clean: with CIP system. The truss and hood can be lifted up for throughout wash. Flat Frying tank bottom had no dead corner while cleaning. 4. Adjustable Oil Flow Speed to ensure fried food shape. 5. Oil Save: the heating system heats the oil only when the temperature drops. 6. Labor save: Auto Oil compensate. Oil Level Controlled by limited switch ensure to close the input oil firmly. 7. Frying time range: tailor-made. Pls refer to the offer. 8. Conveyor type: tailor-made. Pls refer to the offer.
Standard Specification: 1. Whole set include: (A.) SUS304 Frying Tank with open input area. (B.) Doule SUS304 Belt Conveyors (Balance Belt), one top and one bottom (C.) SUS304 Frying Tank Top Hood (D.) screw type truss and hood raising system. (E.) Oil Flow Circulation system with pump (F.) External Oil Heating System with Hi/Low Control Burner (G.) Auto Oil Compensate Detect and control. (H.) Auto Temperature Control and frying time control. (I.) SUS04 Solid Water proof and good radiating Control Box (J.) Oil coarse filter. (K.) CIP System (L.) Protected Cable Tube, prevent mouse bite. (M.) Piping between the heating system and fryer tank. 2. Safety Design: (A.) 2 sets of EMG. Stops. (B.) Heat Exchanger Overheat Alarm. (C.) Heat Exchanger Pressure detect, alarm and shut down. (D.) Fuel Input detect and shut-down
MASTER FRYER with EXTERNAL HEATING SYSTEM
Free Fall Input (Standard)
Water Proof Control Panel
Front View
MF FRYER DIMENSION CHART Model
Fryer Size (cm)
(*2)
Effective Frying Space
Oil Volume (*1)
Driving Power
MF226
L330 x W380 x H210
L220 x W62 x H210
320
0.56KW
MF228
L330 x W400 x H210
L220 x W82 x H210
340
0.56KW
MF324
L330 x W360 x H210
L220 x W42 x H210
300
0.56KW
MF326
L430 x W380 x H210
L320 x W62 x H210
380
0.56KW
MF328
L430 x W400 x H210
L320 x W82 x H210
450
0.56KW
MF426
L530 x W380 x H210
L420 x W62 x H210
460
0.56KW
MF428
L530 x W400 x H210
L420 x W82 x H210
540
0.56KW
MF626
L730 x W380 x H210
L620 x W62 x H210
650
0.75KW
MF628
L730 x W400 x H210
L620 x W82 x H210
800
0.75KW
*1: Oil Volume might change due to the weather, oil type and heating temperature. *2: Fryer size might change due to add the optional device.
Heat Exchanger with Burner
Lifting Screw
Individual Teflon Inlet Slope CV (optional)
Oil Circulation
Burner Capacity
7.5HP
150,000Kcal
7.5HP
150,000Kcal
10HP
200,000Kcal
10HP
200,000Kcal
10HP
200,000Kcal
10HP
200,000Kcal
15HP
300,000Kcal
15HP
400,000Kcal
20HP
400,000Kcal
MASTER FRYER with EXTERNAL HEATING SYSTEM
Optional Device 1. Built-in SUS304 Inlet Slope conveyor. 2. Individual Teflon Inlet Slope conveyor. 3. Built-in SUS304 Inlet Stir Paddle 4. Built-in Sediment scrapper and remove conveyor. 5. Any other conveyor which match with your food. 6. Ratio control Burner: the oil temperature tolerance is +/- 3℃
YouTube: www.youtube.com/HOLACOOK | HOLA Enterprise Ltd. 4F-2, No.8, Ln.25, Yueyang St., Nanzi Dist., Kaohsiung City 811, Taiwan(R.O.C.) TEL: +886-7-3733074 Email: hola.cook@gmail.com
FAX: +886-7-3749834 http://www.hola-cook.com