Keypads
S.series
Contents
S.series
Description ...................................................................................................... 3
Product Assembly .......................................................................................... 4
Keypads ........................................................................................................... 5
Technical Data................................................................................................. 6
Drawings.......................................................................................................... 7
Index............................................................................................................... 11
2 10.2008
Description
S.series
Product Information General notes The 12 or 16 key S.series keypads are specially designed for public environment applications, such as vending machines, ticket machines, payment terminals, telephones, access control systems and industrial machinery. Keys and housing are built from chrome plated zinc alloy (Zamak). The S.series therefore has high resistance to impact and vandalism and is also sealed to IP 67. Mounting The keypad may be mounted from either the front or rear of a panel. Front mounted keypads require a small cutout for the pin header connector on the back side of the S.series. Rear mounted keypads are mounted through a rectangular cutout. To ensure IP 67 sealing a gasket is supplied with the keypad and this is suitable for both forms of mounting. Contacts To ensure integrity of contacts and lower switch ratings, the contacts are gilded and external connection to the keypad is by means of a pin header on the back. The electrical keypad circuit can be supplied in a choice of either matrix or common point configuration. Keys The metal anti pull-off keys are highly resistant to shock and fire. Marking Non-illuminated keys are engraved with the characters filled in black. Custom markings or symbols in different colours are available on request. Illuminated keys are moulded with characters that are cutout then filled with a clear resistant resin for clear illumination. Illumination On illuminated versions the keys are individually lit with yellow or blue LED's which them especially suitable in poorly lit locations. Other LED colours are available on request. NOTE A load resistor may need to be connected by the customer in order to power the LEDs correctly. Luminostity and wave length scattering caused by technologie used in the LED manufactering processes may lead to visual differences in our products.
We reserve the right to modify technical data All dimensions in mm
3 10.2008
S.series
Product Assembly Keypad 12 keys, back mounting 1 Front panel 2 Gasket 3 Keypad
0
Keypad 16 keys, front mounting 1 Keypad 2 Gasket 3 Front panel
0
4 10.2008
S.series
Keypads Keypad
12
Hexadecimal black
without
Telephone
LED blue LED yellow
Telephone black
without
a 63 x 82 mm Typ-Nr.
Technical drawing
LED yellow
P M P M P M P M P M P M
b 82 x 82 mm Typ-Nr. S.16300.211 S.16350.211 S.16300.241 S.16350.241 S.16300.001 S.16350.001
Mounting dimensions
16
Illumination LED blue
Component layout
PH
Marking Hexadecimal
Circuit
IP 67
Key cap Zamak chromed
No. of keys
Terminals
Keypad non-removable metal keys, vandal resistant
Front protection
Continuation see next page
e
S.12100.211 S.12150.211 S.12100.241 S.12150.241 S.12100.001 S.12150.001
4 1 4 1 4 1 3 2 3 2 3 2
2 2 2 2 2 2 1 1 1 1 1 1
2 2 2 2 2 2 1 1 1 1 1 1
0.650 0.650 0.650 0.650 0.650 0.650 0.550 0.550 0.550 0.550 0.550 0.550
Other options on request : Custom colours, LED colours and markings Terminals: PH = Pin header Circuit: P = Common point, M = Matrix Component layout from page 7, Mounting dimensions from page 9, Technical drawing from page 10
5 10.2008
S.series
Technical Data Climate resistance as per EN IEC 60512-6 Damp heat 21 days Dry heat 10 days, +85 °C Saline mist 96 hours
Keypad Material Keys Zamak 5 with chrome finish Housing Zamak 5 with chrome finish Back plate Steel chromated Contacts Carbon pills Carbon on Cu tracks
Mechanical characteristics Actuating force 1 N ... 3 N Actuating travel 1.5 mm ±0.3 mm Rebound time ≤40 ms
Electrical characteristics Operating voltage/-current Nominal 5 V, 5 mA Maximum voltage 24 V Minimum voltage 0.5 V Minimum current 0.1 mA Illumination Current consumption for single LED: 20 mA at 2.1 V (yellow and green) 20 mA at 1.9 V (red) 10 mA at 3.4 V (blue) Isolation resistance ≥1000 MΩ at 100 VDC Contact resistance ≤200 Ω Electrical life 4 Million cycles of operation per key Electrostatic breakdown value 5 kV Electric strength 1500 Vrms, 50 Hz, 1 min., as per EN IEC 60512-2
Environmental conditions Storage temperature -30 °C ... +85 °C Operating temperature -25°C ... +85°C Front protection IP 67 as per IEC 60529, when mounted
6 10.2008
Impact resistance IK10 (20 J)
Approvals Declaration of conformity CE RoHS
S.series
Drawings Component layout 1 Keypad page 5 Rear view Male pin connector HE13
Contacts layout Hexadecimal
4 10 9
1 4 7 A
2 5 8 0
3 6 9 B
NC = Not connected
Female mating connector HE13 not part of delivery
F E D C
7
6
8 16 LED
3
5
9
4
10
3
+ LED / NC 11
2S 1S
- LED / NC 12
5 6 7 8
+ 11 - 12
for illuminated version only
S1 Security shunt S2
12 keys, Matrix, Hexadecimal 2 Keypad page 5 Contacts pin-out Telephone
4 10 9
2 5 8 0
3 6 9 #
12 LED
3
1 4 7
Rear view Male pin connector HE13 Female mating connector HE13 not part of delivery 7 NC 8 9 10 + LED / NC 11 - LED / NC 12
NC = Not connected
6 5 4 3 2S 1S
5 6 7
+ 11 - 12
for illuminated version only
S1 Security shunt S2
12 keys, Matrix, Telephone
7 10.2008
S.series
Drawings 3 Keypad page 5 Contacts layout Telephone
Rear view Male pin connector HE13 Female mating connector HE13 not part of delivery 7 8 9 10 NC 11
2 3 4 5 6 7 8 9 10 21
NC = Not connected 6
5 4 3 2 1 NC
12 LED
1 2 3 4 5 6 7 8 9 0 #
20 19 Cp 18
+ 16 - 15
NC 12 S 13 S 14 - LED / NC 15 + LED / NC 16
for illuminated version only
S 13 Security shunt
22 NC 21 20 19 18 Cp
S 14
17 NC
12 keys, Common point, Telephone 4 Keypad page 5 Contacts layout Hexadecimal
Rear view Male pin connector HE13
5 6 7 10 2 4 8 11 1 3 9 12 22 21 18 13
Female mating connector HE13 not part of delivery
NC = Not connected
7
6
8
5 4
9
3
10
2 1
11
16 LED
1 2 3 F 4 5 6 E 7 8 9 D A 0 B C
Cp 14
+ 16 - 15
12 for illuminated version only
S 19 Security shunt S 20
22 21 20 S 19 S
13 Cp 14 - LED / NC 15 + LED / NC 16
18 17 NC
12 keys, Common point, Hexadecimal
8 10.2008
S.series
Drawings Mounting dimensions 1 Keypad page 5 Rear panel mounting
Front panel mounting
74 -+ 0.1
74 -+ 0.1
35 min.
63
+0.2 0
4 x M6 stud
27.5
10 min.
93 -+ 0.1
82
93 -+ 0.1
+0.2 0
R2
4 x Ă˜ 6.6
18 min.
12 keys 2 Keypad page 5 Rear panel mounting
Front panel mounting
93 -+ 0.1
93 -+ 0.1
35 min.
82
+0.2 0
4 x M6 stud
27.5
10 min.
93 -+ 0.1
82
+0.2 0
93 -+ 0.1
R2
4 x Ă˜ 6.6
18 min.
16 keys
9 10.2008
S.series
Drawings Technical drawing 1 Keypad page 5 96
Ø 6.6
63
27.5
2.54
Male pin connector HE13
6.2
11.6
82
10 x 2.54
Location mark for blind
Matrix
19
93 -+ 0.1
115
90°
Common point
11 x 2.54
Engraving width = 1 mm
R11
19
8.6
74 -+ 0.1
27.5
11.6
8.5 12 13.5
2 Keypad page 5 115
Ø 6.6
82
27.5
11 x 2.54
27.5
2.54
Male pin connector HE13
6.2
11.6
93 +- 0.1
10 x 2.54
Location mark for blind
19
82
115
90°
Common point
Matrix 11.6
Engraving width = 1 mm
R11
19 93
+ - 0.1
8.6
8.5 12 13.5
10 10.2008
Index from Typ-Nr. Typ-Nr. S.12100.001 S.12100.211 S.12100.241 S.12150.001 S.12150.211 S.12150.241 S.16300.001 S.16300.211 S.16300.241 S.16350.001 S.16350.211 S.16350.241
Page
Typ-Nr.
Page
Typ-Nr.
Page
................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5
11 10.2008