Bridge Twisted Tyre - adventure 30ft 30ft
3ft 5ft including foundations The Bridge Twisted Tyre is a great part of our adventure playground. You will need small tyres, 3” bolts, large chain or metal cable, 2.5” 3mm mild steel pipe, metal and budget paint. You will need to cement in the frames. Make sure you have at least 2 metres of space around the bridge.
Per Bridge tyre twister Small tyres Metal cable or large chain 3” bolts with 2 washers 2.5” 3mm mild steel pipe
Amount 12 62ft 24 40ft
How to build 1. 2. 3. 4.
Cut two holes 3” in diameter into two of the tyres. Weld the legs as in the diagram with the two tyres above on the cross beam. Dig the foundations and cement in the foundations. Drill and bolt the remaining tyres together but make sure that you do this so they twist as in the diagram. 5. Now drill the holes in the tyres for the chain, remember you need to make the tyres twisted. 6. Once this is done and the cement is fully dry you can hang the tyres.
Colour Scheme Our suggested colour scheme would be to paint the tyres three different alternating colours with the frame legs a different colour.
1
Foundations
3ft
3ft
12ft
3ft
X marks the centre of the foundation and where the leg should go. 3ft deep
12ft
3ft
18”
18”
2