Classroom
1
The Classroom is perfect for role play games and performances. You will need small tyres, square hollow sections, iron sheets, budget and metal paint. You will also need to cement the frame into the ground. Make sure you have at least 1.5 metres of space around the classroom.
Per Classroom 1.5 x 1.5”, 2mm sq. hollow sec. (WHITE) 1) 2x 102” (front legs) 2) 2x 99” (2 of back legs) 3) 114” + 2x 46” (front and 2 side roof poles) 4) 99” + 75” ( 1 back leg and back roof pole) 1”x 1”, 2mm sq. hollow sec. (GREY) 1) 5x 35” (back wall horizontal supports) 2) 5x 44” (5 side wall horizontal supports) 3) 3x 39” + 4x 29” (3 roof supports & 4 windows) 4) 1x 44” (1 side wall horizontal support) Box of 20 x 5mm rivets Medium tyres Small tyres Iron sheets 3” bolts Plywood 4mm
Amount
4
3 (+44”) 1 4 10 6 6 4ft x 4ft 2
How to build 1. Start by welding the frame to the dimensions shown. 2. Then dig the foundation holes as per diagrams below. 3. Before cementing in the frame, sand and paint with undercoat the section of metal that will be going in the foundation. 4. Cement in the frames. 5. Before you rivet on the iron sheets you will need to prepare and paint the metal frame. 6. Once the paint is dry use a rivet gun and drill to connect the iron sheets. 7. Attach the plywood using 3” bolts to the centre of the back panel to act as a blackboard. 8. Now the frame is in place you can arrange the tyres in front of the classroom to act Arrange the tyres as shown above, medium tyres at the back (4) and small tyres for the other two rows (5 and 5). 9. Paint.
Colour Scheme Use blue or green iron sheets Paint the metal orange Paint the plywood with blackboard paint Foundations
X marks the centre of the foundation and where the leg should go. 2ft deep
37.5”
18” 18”
37.5”
46”
46” 114”
3