Sand and Water Play
The Sand and Water Play is designed for children to be able to interact with both sand and water through play. You will need 2.5” mild steel pipe, small and large tyres. You will also need to cement in the foundations of the frame. Make sure you have at least 1.5 metres of space around the sand and water play.
Per sand and water wall Small tyre Large tyre 2.5” 3mm mild steel pipe 5” bolt with washers
Amount 2 1 20ft 20
How to build 1. Dig the foundations. 2. Cut the pipe into three 6ft sections and cap the ends. 3. Before cementing in the frame, sand and paint with undercoat the section of metal that will be going in the foundation. 4. Cement in the pipes. 5. Cut the sides off of the large tyre leaving only the connected tread. 6. Place around the pipes as shown above. 7. Cut the small tyres into small sections. 8. Drill and bolt the tyres to the metal upright poles as shown above. 9. Fill with sand or water. 1
10. Paint. Colour Scheme Paint the poles one colour Paint the tyre sections different colours of red, yellow, bloe, green and orange Paint the large tyre purple Foundations
X marks the centre of the foundation and where the leg should go. 2ft deep
10�
2ft 2ft
10�
2
3
4