Shops triple

Page 1

Shops Triple

Sides of shops 1.28m

24cm

30cm

20cm

63cm 1.35m

X X

X 63cm X X

1.17m

1.89m + 45cm foundation

1.79m + 45cm foundation

X

20cm 45cm foundation

1.25m

= 1.5” x 1.5” (40x40mm)

= 1” x 1” (25x25mm) 1


Back of shops

4.54m

71cm

71cm

71cm 71cm 1.75m

1.3m

1.35m

71cm 75cm

75cm

75cm 75cm

75cm

75cm

71cm

1.79m + 45cm foundation

20cm

24cm

20cm

Roof of shops

4.54m

75cm

75cm

1.2m

75cm 75cm

75cm 75cm

71cm

72.5cm m

71cm

72.5cm m

71cm 72.5cm m

4.46m

2


Front of shops

4.54m

75cm

4.46m 71cm

71cm

75cm

75cm

71cm 75cm

1.89m + 45cm

1.85m + 45cm foundation

95cm

1.5m 65cm

70cm 1.46m

71cm

20cm

1.25m

85cm

41cm/16”

13”/33cm

Horn pipe 20cm

The Shops are a fantastic imaginative play element and go really well in a village scene with lots of vehicles. You will need 1.5” and 1” hollow section and iron sheets. You will also need to cement in the foundations of the shops. Make sure you have at least 1.5 metres of space around the Shops.

Per set of shops 1.5”x1.5” 2mm hollow section 1”x1” 2mm hollow section Iron sheet (green or blue) 12ft x 1ft x 1” hardwood Small tyre Wooden disc 2” 3mm mild steel pipe 5 x 20mm rivets 2mm mild steel sheet 3” bolts and washers

Amount 8 5 10 2 11 1 10ft 1 ½ boxes 4x2ft 39 3


How to build 1. 2. 3. 4.

Weld the frames to the measurements in the diagrams. Make sure that there are no sharp edges. Dig the foundation as shown. Before cementing in the frame, sand and paint with undercoat the section of metal that will be going in the foundation. 5. Cement in the frame of the shops. 6. Paint the frame. 7. Using a drill and rivet gun you can attached the iron sheets to the frame. 8. Cut three 5ft and six 1ft pieces of wood 9. Paint the 1ft sections with blackboard paint 10. Paint each of the 5ft sections a different shop sign: 1 restaurant, 1 radio station and 1 internet café. 11. Attach the six 1ft pieces (as shown above) to the walls of the right hand shop, two on the back wall and one on each side wall, using four 3” bolts. Grind off the remaining bolt thread on the back. 12. Attach each of the 5ft sections to the horizontal hollow section at the top of each shop and the vertical dividing hollow section using four 3” bolts. (radio left, restaurant centre, internet café right). 13. Using 5 small tyres, the remaining bolts (11) and the wooden disc construct a Table Siraj and place inside or in front of the middle shop. 14. Place 1 small tyre underneath each 1ft piece of wood in the internet café. 15. Place a small tyre 1ft in from each side wall of the radio station. 16. Using the 2” mild steel tube create a horn pipe as shown above 17. Using the 2mm mild steel sheet create the cone for the horn pipe as shown above and weld to the horn pipe. 18. Attach to the left hand shop as shown above. 19. Paint the inside of the three shops as desired.

Colour Scheme Paint the metal orange Paint the cone yellow Use blue or green iron sheets. Paint the boards in bright colours

4


Foundations

18�

X marks the centre of the foundation and where the leg should go. 2ft deep

18�

4.5m

1.25m

75cm

1.5m

5


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.