Swing Seat Bucket
The Swing Seat Bucket is designed to be safe and durable for smaller children. All you need is a small tyre and 3� bolts.
Per bucket swing seat Small tyres 10x50mm bolts with 2 washers
Amount 2 12
How to build 1. Cut the rims from the two tyres. 2. Cut the tread in half and remove any wires or sharp parts. 3. Cut the two treads to the length that you wish the two sections of the seat to be based on child’s age/size. 4. Drill four holes and bolt the tyre tread together to form a loop, make sure the head of the bolts are inside the swing seat. 5. Drill eight more holes four at the front and four at the back of the seat and attach the under support, make sure the head of the bolts are inside the swing seat. 6. Cut the remaining thread off of the bolts level with the nut. 7. Paint.
Colour Scheme Paint the seat one colour Paint the metal loops one colour
The colours must match the swings: The uprights are blue and the horizontal loop is also blue The crossbars are yellow and the underneath loop is yellow OR 1
The uprights are green and the horizontal loop is green The crossbars are purple and the underneath loop is purple
2