Tyre Ladder- adventure
2ft
12ft
9ft inc foundation
The Tyre Ladder is a great part of our adventure playground. You will need 2.5” 3mm mild steel pipe, checked plate, large chain and metal paint. You will also need to cement in the foundations. Make sure you have at least 1.5 metres of space tyre ladder.
Per wobble board balance Large chain Medium tyres 3” bolts and washers 2.5” 3mm mild steel
Amount 18m 14 26 20ft
How to build 1. Weld the frames as shown in the diagram. 2. Dig the foundations as shown. 3. Before cementing in the frame, sand and paint with undercoat the section of metal that will be going in the foundation. 4. Cement in the frame. 5. Drill 4 holes for the chain to pass through and 2 holes for the tyres to be bolted together. 6. Bolt the tyres together using 2 3” bolts per touching pair of tyres and thread the chain through. 7. Once pipes are fully cemented attach the set of tyres. 8. Fully cement in the end tyres of either end of the ladder. 9. Paint.
1
Colour Scheme Paint the tyres red and yellow Paint the metal green Foundations
8ft
X marks the centre of the foundation and where the leg should go. The hole should be 24� deep. 3ft
18�
8ft
2