Wobble Board - adventure
4ft 6” including foundation
18” 3m
The wobble board is a great part of our adventure playground. You will need 2.5”, 3mm mild steel pipe, chequer plate, large chain and metal paint. You will also need to cement in the foundations. Make sure you have at least 1.5meters of space around the wobble board.
Per wobble board Large chain 2mm chequer plate 2.5”, 3mm, mild steel pipe
Amount 2m 8ft x 4ft 40ft
How to build 1. Weld the frames as shown in the diagram. 2. Dig the foundations as shown In the diagram below. 3. Before cementing in the posts, sand and paint with undercoat the section of metal that will be going into the foundation. 4. Cement in the posts and cap the ends with check plate. 5. Once pipes are fully cemented attach chain to the corners of the board and weld the other ends to the top of the poles. 6. Paint.
1
Colour Scheme Psint the posts one colour Paint the board one colour with footprints spaced along it Foundations
X marks the centre of the foundation and where the leg should go. 24” deep
18” 18”
11ft
54”
2