INNOVATIVE OUTDOOR SOLUTIONS
ECCO products is a Belgian developer and manufacturer of innovative and user-friendly products with high added value for both the private and public sectors, and wishes to be a trendsetter at the European level. ECCOproducts constantly analyses the market and is always furthering its development of intelligent products. We keep the entire process flow in-house (from development to sales) and can therefore apply stringent quality parameters ourselves. For the distribution of our products, we rely on a selective network of dealers that market our products all over Europe. This commercial network is supported by strong and innovative marketing tools.
/ 23 - 26 /
/ 13 - 22 /
/ 09 - 12 /
/ 05 - 08 /
ECCOGRAVEL (1/4) / 04 /
THE STRONG GRAVEL GRID
ECCOgravel
UNIQUE SELLING POINTS + Sheet in HDPE: high compressive strength, high impact value and frost resistant. Increased resistance against torsional loads due to plastic reinforcements between the cells. + Increased resistance against torsional loads due to additional plastic reinforcements between the cells
APPLICATIONS WITHOUT CARS
1. Surface layer (gravel) 1 cm 2. Gravel sheet ECCOgravel速 3. Levelling layer (max. 15 cm)
ECCOgravel
APPLICATIONS WITH CARS
1. Surface layer (gravel) 1 to 2 cm 2. Gravel sheet ECCOgravel速 3. Levelling layer (5 cm) 4. Sub-base (25 cm)
+ Polyester geotextile: very strong, does not rot and there is no risk of silting up due to the open structure + Very easy to use: can be transported easily and fast thanks to pliable size +
Always work with a well-constructed sub-base
Perfectly walkable and ridable INSTALLATION 1
Surface layer
The honeycomb structure should be just covered with gravel (size 4-16 mm). For finer gravels this will be approximately 1 cm, for coarser gravels 2 cm.
/ 05 / ECCOGRAVEL (2/4)
2
Honeycomb grid
A thicker grid offers a better distribution across the substrate. ECCOGRAVEL DOUBLE
ECCOGRAVEL DOUBLE
10 mm
10 mm
30 mm
40 mm
3
Levelling layer
The levelling layer can consist of: • sieved sand • limestone or porphyry 2-4 mm, 1-3 mm, 0-4 mm 4 Sub-base Limestone rubble, porphyry rubble or broken concrete rubble (0-32 mm or 0-40 mm). We do not recommend brick rubble, as this is ultimately pulverised.
ECCOGRAVEL (3/4) / 06 /
APPLICATIONS
DIMENSIONS
Height
Dimensions
m²/grid
Gravel/m²
4 cm
160 x 120 cm
1.92
+/- 80 kg
3 cm
160 x 120 cm
1.92
+/- 65 kg
• Driveways •
Parking areas
•
Garden paths
• Terraces • Footpaths
/ 07 / ECCOGRAVEL (4/4)
ACCESSORIES/MISCELLANEA ECCOgravel is also available in black. + Ideal for using darker coloured gravel types, + Such as basalt.
PARKING PLACE MARKER The ideal solution for demarcating your parking place. Available in white or black. Diameter: ø 85 mm
ECCO BORDERS (1/4) / 08 /
HIGH-QUALITY BORDERS
1 // Basic: simple, economic borders UNIQUE SELLING POINTS +
Easy to use
+ Doubled-up top edge for maximum safety
+
Fast and easy installation
+
+ Flexible: right angles and wavy forms are possible +
APPLICATIONS
Paved surfaces
• Terrace • Flowerbed
+ Available in 2 versions: Galvanised steel 1.2 mm and Corten steel 1.5 mm
Low maintenance
DIMENSIONS
Border of: •
Produced with high-quality materials
• Lawn •
Vegetable garden
l x w x h (in cm) Galvanised: 240 x 0.12 x 8 Corten: 240 x 0.15 x 8 Height of pickets: 43 cm
8 cm 43 cm
80 cm distance between metal pickets
/ 9 / ECCO BORDERS (2/4)
INSTALLATION The basic borders are designed to provide a beauti-
1
4
2
5
3
6
ful finish to garden paths, terraces, flowerbeds and lawns in a simple, fast and aesthetic manner. They are characterised by flexibility. Basic borders are both flexible and firm; they can be bent into 90째 corners as well as wavy forms. They are available in Corten steel and galvanised steel.
1
Marking the section
2
Hammer pickets into the ground
3
Tap headpiece unto the picket
Attach border to headpiece using 2 self-drilling 4 screws Interlink borders using the supplied nuts and 5 bolts 6
Repeat steps 2 through 5
ECCO BORDERS (3/4) / 10 /
2 // Delta: sleek, high-quality borders with a solid base UNIQUE SELLING POINTS + Solid concrete base that ensures sleekly shaped borders +
Long lifespan
+
Low maintenance
+
Convenient installation
+
Lots of possibilities for combinations
+
Available in 2 versions: Stainless steel and Corten steel
+
Available in 2 thicknesses: 20 mm and 50 mm
/ 11 / ECCO BORDERS (4/4)
APPLICATIONS
DIMENSIONS
20 mm width Suitable for all areas on which no driving takes place, such as: •
Garden path borders
•
Pond edges
•
Terrace borders
•
Flower bed and lawn borders
50 mm width Suitable for all areas, including ones on which driving takes place, such as: LXWXH
DELTA CORTEN
DELTA INOX
Total dimensions (including concrete): 1250 X 20 X 145 mm Dimensions steel: 1250 X 20 X 25 mm
1250 X 20 X 145 mm 1250 X 20 X 30 mm
Total dimensions (including concrete): 1250 X 50 X 145 mm Dimensions steel: 1250 X 50 X 25 mm
1250 X 50 X 145 mm 1250 X 50 X 30 mm
•
Driveway borders
•
Parking area borders
•
Access road borders
ECCOFENCE (1/6) / 12 /
EXCLUSIVE GABIONS
1 // ECCOfence KIT: a professional construction kit
ACCESSORIES/OPTIONAL COMPONENTS
UNIQUE SELLING POINTS + Professional "all-in-one" construction kit +
Matching Kit Bags available
+ Easy assembly thanks to enclosed layout plan + installation video +
Easy to customise
+
Little loss of space due to narrow width
+
Suspended installation possible
+
Subtle transition between gabions
+
Avaialble in 4 heights
+
All nuts and bolts included.
+
Additional reinforcements for maximum safety
1
2
/ 13 / ECCOFENCE (2/6)
APPLICATIONS • Barriers • Terraces • 3
• Publicity •
1
Retaining walls
Partition wall
Base 90°: to create corners using the ECCOfence KIT.
2
Raising supports: especially designed to compensate for 5% differences in heights with the ECCOfence KIT system, such as in the case of an inclined driveway.
3
Side for aesthetic finish: for each height, a finishing piece is optionally available. This may be used, for example, to finish the wall at any KIT height in a way that leaves the stones visible on the side.
ECCOFENCE (3/6) / 14 /
INSTALLATION Base Option 1: Installation on a concrete ring beam measuring 50 cm in width and at least 30 cm in depth (350 kg cement/m続 ). The poured concrete is always cast on the load-bearing substrate.
Option 3: Using ECCO prefab supports.
40 x 40 cm
50 cm
Option 2: Placement on plinths that are poured on the spot using poured concrete. Dimensions plinth: 50 x 50 x 50 cm Depth: from load-bearing substrate
60 x 60 cm
Installation video Use this link to watch the correct way of installing the ECCOfence kit:
/ 15 / ECCOFENCE (4/6)
200 cm
T
100 cm 10
0
2 T
4 3
2
50
3
1
The above photo depicts installation using optional finishing mesh. The standard ECCOfence KIT includes two galvanised, full grids.
ECCOfence KIT 150: with a total height of 150 cm (including 9-cm suspended part) ECCOfence KIT 200: with a total height of 200 cm (including 9-cm suspended part)
KI T
50 cm
ECCOfence KIT 100: with a total height of 100 cm (including 9-cm suspended part)
KI
available:
KI
The ECCOfence KIT is standard 201 cm long and 20 cm wide, various heights are
ECCOfence KIT 50: With a total height of 50 cm (including 9-cm suspended part)
15
0
150 cm
KI
DIMENSIONS
T
20
0
1
4
ECCOFENCE (5/6) / 16 /
3 // ECCOfence ALUBOX: trendy aluminium gabion UNIQUE SELLING POINTS
APPLICATIONS
+
Professional construction kit
+
Little loss of space due to narrow width
• Barriers
+
On-site assembly and filling possible
+
Design look thanks to aluminium
•
Terraces
+
Easy assembly
+
Choice between different finishes
•
Publicity
+
Easy to customise
+ Multiple applications: benches, partitions,...
•
Partition wall
•
Garden bench/garden table (due to aluminium surface profile)
/ 17 / ECCOFENCE (6/6)
Base Option 1: Installation on a concrete ring beam measuring 50 cm in width and at least 30 cm in depth (at least 350 kg cement/m続 ). The poured concrete is always cast on the load-bearing substrate. Option 2: Placement on plinths that are poured on the spot using poured concrete. Dimensions plinth: 50 x 50 x 50 cm. Depth: from load-bearing substrate Option 3: Using the ground anchor. The ground anchor was specifically developed for the Alubox. It consists of four large bolts with fitting plates. This ground anchor is placed on the load-bearing substrate. The ground anchor is secured using quick-drying concrete (curing time is only 2 hours). The advantage of this system is that the Alubox can still be adjusted so that it is properly level.
DIMENSIONS ECCOfence Alubox is the most narrow gabion in our range. The Alubox is only 16.5 cm wide. As a result, there is virtually no loss of space, while it is still very solid thanks to the concrete anchor. In addition, you will need less filling, which will reduce the costs.
Alubox 190 201 x 16.5 x 190 Alubox 140 201 x 16.5 x 140
Alubox 90 201 x 16.5 x 90
Alubox 40 201 x 16.5 x 40
ECCOSEDUM (1/4) / 18 /
READY-FOR-USE GREEN ROOF TILES
UNIQUE SELLING POINTS 1
General advantages of a green roof
+ You create a patch of green in the middle of the city where nature can flourish fully + A green roof increases the thermal and acoustic insulation value of your house + Your roofing has a longer life span as the plants provide protection against UV radiation and fluctuations in temperature + Green roofs retain rainwater and ensure that it is slowly drained. In this way, there is less load on the sewer system and flooding is prevented. + Green roofs capture all kinds of dust particles from the atmosphere and form a buffer against air pollution, as it were
/ 19 / ECCOSEDUM (2/4)
2
ready-for-use green roof tiles
+ Easy handling: the tiles only weigh between 8 and 12.5 kg/m² + Low weight per m²: between 30 and 55 kg/m². As a result, the ECCOsedum system can be placed on virtually any roof + ECCOsedum can be installed throughout the year (in contrast to on-the-spot vegetation, in which case installation should be avoided in winter and summer) + Easily removable if necessary, for example in case of water infiltration or roof maintenance Of course, a green roof also provides a very nice view!
ECCOSEDUM (3/4) / 20 /
Installation 1.
Proper roof waterproofing is assumed.
2.
Install a root-resistant layer. If necessary, apply 10-cm overlaps and tape the seam shut.
3.
Install a protective layer, ensuring 10-cm overlaps.
4.
Lock the ECCOsedum tiles together.
5.
Finish the edges with roof gravel (= vegetation-free zone) or cut the tiles to size
/ 21 / ECCOSEDUM (4/4)
DIMENSIONS / DETAILS
1
Vegetation layer The ECCOsedum system makes use of no less than 7 types of sedum which are fully rooted (not giving weeds a chance).
2
Substrate layer The substrate layer provides nourishment and water to the vegetation, supplies oxygen and ensures anchoring of the roots
3
Filtering layer This layer prevents washing away of the substrate. A non-woven, 150-g/m² polypropylene cloth obstructs the fine particles from the substrate.
4
Water buffering layer Water buffering helps the plants to survive dry spells. Therefore, the lower half of the tray ensures buffering of the rainwater.
5
Drainage layer The drainage allows excess precipitation to be drained away on top of the roof membrane, without hindering catchment.
5 4 3
2
1
Notes
©2015