POLIMPIANTI

MANUFACTURER OF POOL COVERS

COMPANY NAME: Polimpianti s.r.l.

SECTOR:

Manufacturer of pool covers

CONTACT PERSON:

Dr. Diego Fidanza

ADDRESS:

Via Piave, 174 21022 Azzate (VA), Italy PHONE: +39 0332 457727 FAX: +39 0332 459126 E-MAIL: info@polimpianti.it WEB: www.polimpianti.it

« For more than 40 years the company has been providing certified quality products that guarantee energy and management savings. Now it’s the point of reference for the production of pool accessories »

Polimpianti started in 1975 in the town of Azzate, near the city of Varese. Over the years it has committed a lot in the research for new tools and techniques to manage and maintain pools, attending the main trade shows and offering professional and state-of-the-art products. More than 40 years of research turned this company into the point of reference for the production of winter and isothermal covers, manual or automatic pool winders and for the design and construction of pools. After two years of specific studies and tests, in 2013 the company obtained the IMQ and IMQECO product certification for isothermal covers that guarantees real energy savings. This was all supported by the well-known Italian Institute for the Quality Mark (IMQ), which cooperated with Polimpianti and issued the relevant certificates, then renewed in 2014. Polimpianti is also an active member of the UNI authority in Italy and of the CEN in Europe acting as a support in regulations activities. Polimpianti is partner and official distributor in Italy of the Dolphin’s original series of automatic pool cleaners by Maytronics. Innovation is Polimpianti’s guideline: the company has always believed in it and it will continue to pursue its mission of passion, research and innovation in the future. Indeed, in compliance with the Kyoto Protocol and the environment, since 2011 Polimpianti has been manufacturing products with clean energy (e.g. installation of solar panels).

ISOROLL DE LUX AND SUNWEAVE Isothermal covers are the ideal solution in summer, but they are perfect also all year round for indoor pools (e.g. public pools) because they can hold back the heat that the water accumulates during the day and they keep it during the night, this way the water neither evaporates nor cools down. Thanks to this system, the time to use the pool can be extended and this means energetic and economic savings. The ISOROLL DE LUX model is made of an intermediate insulating layer and a PE mousse with closed cells weld-

AQUAMATIC PVC RIGID SLATS COVER Isothermal cover made of slats in shock-absorbent solid PVC, stabilised with special additives to avoid yellowing and UV and chlorine resistant. Slats are arched and perfectly smooth to guarantee high levels of insulation thanks to the air chamber spread on the entire length. AQUAMATIC slats are equipped with ABS end caps welded with ultrasound technique and a removable end caps available in 3 different lengths, along with a version with levylene bristles. → Discover Aquamatic ed to the lower membrane in PE, which acts as a steam barrier and is highly resistant to the attack of chlorine, algae and microorganisms. SUNWEAVE is an isothermal translucent cover made of a double layer in co-extruded PE manufactured according to the GeoBubbleTM technology, which is thermo-welded to a third upper layer made of a special weft knitted “fabric”. Both are made of three layers joined with a special procedure to make them inseparable and highly resistant to tears and UV radiation. ←

MULTIMATIC ELEGANT 4 Polimpianti offers a wide range of automatic and manual winders. Automatic and mobile reel system with a stainless steel AISI 316 or pultruded structure, on which is it possible to roll up four isothermal covers, one over the other. Provided with strong side supports (L or XL dimensions) made of stainless steel AISI 316. L or XL side supports are treated to be rust proof and cannot be affected by the corrosion phenomenon (pitting). They are mounted on pivot wheels with service brake and are specifically designed to bear the weight of large-size public swimming pools covers. → WINCOVER AND WINCOGRILL Winter covers protect the pool during cold months thanks to a special ultralight material, which is resistant to tears, freeze and UV radiations; moreover it prevents algal photosynthesis and resists to shock chlorination. WINCOVER TJJ is the most classic floating solution, it is light and easy to install. WINCOGRILL is the elegant draining and stretched solution, it is equipped with a perimeter band in heavy calendered PVC in sturdy trevira texture. ←

WINCOGRILL

Installation

Removal

WINCOVER

Installation

Removal

START SAVING MONEY NOW! New pool management costs by Polimpianti. It is a new software that can calculate energy and economic savings thanks to the use of our isothermal covers. According to some parameters, the software can effectively calculate the ROI estimated time. It’s like a user’s guide and an effective tool to choose the most suitable cover and winding system for any pool. ← www.polimpianti.it/software-risparmio