XM Electrnoic Drumhead Assembly Manual
Setup 1. Disassemble acoustic drumhead, and take drumhead off the drum shell.
Setup 2.
Stick drum rim trigger to the inside of the drum shell. Please do not exert too much pressure or this may cause Trigger to crack
Setup 3. Place the round protective black cloth on top of the rim tirgger
Setup 4. Replace the acoustic drumhead with XM Electronic drumhead.
Setup 5. Tighten down each drumhead screw in a diagonal direction (1/2 circle trun on each screw)
Setup 6. Insert end of the 6.3mm cable jack to the connect port amd the other connect to Module. And, Assembly is now completed.