datasheet
Aerohive AP370
High Performance 802.11ac/n Dual-Radio 3x3:3 AEROHIVE NETWORKS AP370 Enterprise access points are where high-performance 802.11ac meets the simplicity of Aerohive’s distributed, cooperative architecture. This power optimized access point line uniquely incorporates next generation 802.11ac, smoothly integrates into your existing 802.3af or 802.3at power and network infrastructure, and provides all the redundancy and power efficiency to set the stage for a future Wi-Fi technologies at the access layer. The AP370 provides high-performance aggregate data rates up to 1750 Mbps with dual concurrent 2.4Ghz 802.11n/g/b and 5Ghz 802.11ac/n/a radios which can support legacy 802.11a, b, g and n clients and interoperate with the rest of the Aerohive Cooperative Control devices to provide a seamless enterprise-class experience for all connected users. The AP370 is an enterprise-grade, high performance two radio (3x3) three stream MIMO 802.11ac/n Access Point, targeted at high capacity enterprise environments.
Key Features and Benefits
The AP370 is an enterprise-grade, high performance two radio (3x3) three stream MIMO 802.11ac/n Access Point, targeted at high capacity enterprise environments.
Cooperative Control All Aerohive access points are built upon the deep, feature rich HiveOS operating system. HiveOS is the backbone of the Aerohive Cooperative Control architecture, and allows the access points to organize into groups or “hives” that coordinate advanced features such as layer 2, layer 3 roaming, cooperative RF management, security information, and mesh networking without dependency on any backend network. Cooperative Control provides all the benefits of coordinated, next generation Wi-Fi with lower Total Cost of Ownership (TCO), more reliability, more scalability, higher performance, and with a focus smooth, simple transition to future technologies. Power-Optimized, Future-Proof Upgrades With the AP370s, Aerohive allows enterprises to integrate 802.11ac into their networks to provide optimal high-density performance, while leveraging legacy power infrastructure or switches if called upon to do so. Leveraging the dual Ethernet ports of the AP370 allows them to be simultaneously connected to two different switches, enabling uninterrupted wireless service during infrastructure upgrades—crucial for today’s mobilefirst enterprises requiring ease of migration without wireless downtime or eliminating forced upgrades to any other part of the network. Enabling a gradual migration strategy to 802.11ac allows organizations to upgrade in the most painless way possible, while ensuring their networks are equipped to handle high-density mobile usage and employees’ needs for high speed performance. Integrated Application Priority and Control By using the robust Quality of Service (QoS) and stateful firewall built into Aerohive access points, the AP370 supports optimizing user application experience on the network. Aerohive access points allow an administrator to create customized user profiles based on context, such as identity of the user, device type, location, and time of day, to prioritize or block applications based on what is critical to that particular user. This user-focused approach ensures every user experience is optimized for mobility
Warranty and Support Every Aerohive Networks device is backed by a limited lifetime hardware warranty. Extended product and technical support may be purchased separately and can include next day advanced replacement, 24x7 or 8x5 technical support, web and email support access, and software updates. For complete support terms go to www.aerohive.com/support.
Aerohive Networks, Inc. 330 Gibraltar Drive Sunnyvale, California 94089 USA phone 408.510.6100 toll-free 866.918.9918 fax 408.510.6199
www.aerohive.com
Contact us today to learn how your organization can benefit from an
Aerohive wireless LAN architecture.
DS_AP370_1113
Product Specifications
Features & Benefits
Hardware Assisted Features
Radio Specifications—802.11a
Flexible Hardware Platform • Multiple radios provide concurrent 802.11a/n/ac and 802.11b/g/n connections with no degradation in performance • Dual Ethernet ports with link aggregation and failover for extra redundancy. • Plenum Rated APs for indoor, office environments • Supports 802.3af PoE or standard power adapter • USB interface for future services • Hardware acceleration for IPsec services Innovative Design • Low profile design blends well into an office environment • Feature optimized hardware design • Low-distraction indicators appear as gently glowing rather than bright blinking lights
Security • Trusted Platform Module (TPM)–Hardware-based key storage and encryption • Wireless privacy & authentication Wi-Fi CERTIFIED™ WPA™ and WPA2™, 802.11i, WEP, 802.1x, PSK • Encryption: AES:CCMP, TKIP, and RC4 (WEP only) • Marking and policing–WMM™ (802.11e) for wireless, • 802.1p and/or DiffServ • Wi-Fi CERTIFIED WMM • WMM power save (U-APSD)
• 5.150–5.950 GHz Operating Frequency • Orthogonal Frequency Division Multiplexing (OFDM) Modulation • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11b • 2.4–2.5GHz Operating Frequency • Direct-Sequence Spread-Spectrum (DSSS) Modulation • Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
Radio Specifications—802.11g • 2.4–2.5 GHz Operating Frequency • Orthogonal Frequency Division Multiplexing (OFDM) Modulation • 20 dBm (100 mW) Transmit Power • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback
Radio Specifications—802.11n • 2.4–2.5 GHz & 5.150–5.950 GHz Operating Frequency • 802.11n Modulation • Rates (Mbps): MCS0–MCS23 (6.5Mbps - 450Mbps) • 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio • HT20 (both 2.4GHz and HT40 High-Throughput (HT) Support) • A-MPDU and A-MSDU Frame Aggregation
Radio Specifications—802.11ac • 5.150–5.950 GHz Operating Frequency • 802.11ac Modulation (256-QAM) • Rates (Mbps): MCS0–MCS9 (6.5Mbps - 1300Mbps), NSS = 1-3. • 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio • VHT20/VHT40/VHT80 support
Anti-Theft • Designed to work with Kensington-style locks • Tamper-proof security screw (with bracket option)
RF Coverage Maps 2.4 Ghz Horizontal
2.4 Ghz Vertical
5 Ghz Horizontal
5 Ghz Vertical
Mounting • Desktop • Wall Mount included as part of AP • Built-in slot for Kensington type locks • Ceiling and Wall Mount locking accessory included with AP • Ceiling Tile flush 15/16” included as part of AP • Ceiling Tile Recessed 15/16”, 3/8”, 9/16” sold as an accessory • Ceiling Tile flush 3/8”, 9/16” sold as an accessory • Suspend Mount sold as an accessory • Plenum Mount sold as an accessory
Antennas • 3x Integrated single band, 2.4-2.5 GHz Omni-directional antennas, 6.0 dBi peak gain • 3x Integrated single band, 5.1-5.8 GHz Omni-directional antennas, 6.0 dBi peak gain
Interfaces • 2x autosensing 10/100/1000 Base-T Ethernet Ports • Dual Ethernet ports with backhaul capabilities • Link Aggregation supported via Ether channel (link aggregation) • 1x Serial RJ45 port (bits per second: 9600, data bits: 8, parity: none, stop bits: 1, flow control: none) • USB 2.0 port (3G/4G WAN connection – Operating as a BR) • 1x Reset Pinhole
Physical • WxHxD: 7.68in.x1.57in.(2.2in at peak) x 7.68in. (19.5cm x 4cm (5.5cm at peak) x 19.5cm) • Weight: 1.5 lbs (0.68 kg)
Environmental • Operating: 0 to +40°C, Storage: -20 to +70°C Humidity: 95%
Power & Sensitivity Table Power shown is per transmit chain and is a maximum power that the radio is capable of, power limits will be limited by local radio regulations.
Environmental Compliance • UL 2043
Power Options (sold separately) • 802.3af and/or 802.3at Power over Ethernet PoE Injector • 12v DC external power adapter • Aerohive switch products
Power Specification • AC/DC power adapter: – Input: 100–240 VAC – Output: 12v/2.0A • PoE nominal input voltages: 48V, 0.35A, (802.3af) – 48V, 0.625A (802.3at) • RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6 • 802.3af compliant with Cat-5 cable or higher
2.4GHz TX Power
RX Sensitvity
5GHz
2.4GHz
RX Sensitvity
6 Mbps – 24 Mbps
20
-90
36 Mbps
18
-82
48 Mbps
16
-78
MCS 5
18
-71
54 Mbps
15
-77
MCS 6
16
-70
802.11a
TX Power
RX Sensitvity
MCS 0, 1, 2
20
-85
MCS 3, 4
19
-77
Rate
TX Power
RX Sensitvity
5GHz
TX Power
Rate
802.11ac VHT20
802.11b
MCS 7
15
-68
1 Mbps
21
-98
MCS 8
14
-63
2 Mbps
21
-95
MCS 9
N/A
-62
5.5 Mbps
21
-94
802.11ac VHT40
11 Mbps
21
-91
MCS 0, 1, 2
20
-85
MCS 3, 4
19
-77
802.11g 6 Mbps – 24 Mbps
20
-87
MCS 5
18
-71
36 Mbps
18
-84
MCS 6
16
-70
48 Mbps
17
-80
MCS 7
14
-68
54 Mbps
16
-78
MCS 8
13
-63
MCS 9
12
-62
MCS 0, 1, 2, 3, 4, 8, 9, 10, 11, 12, 16, 17, 18, 19, 20
20
-89
19
-87
MCS 0, 1, 2
20
-85
MCS 5, 13, 21
18
-77
18
-77
MCS 3, 4
19
-77
MCS 6, 14, 22
17
-74
16
-75
MCS 5
19
-71
MCS 7, 15, 23
16
-74
15
-73
MCS 6
18
-70
MCS 7
N/A
-68
MCS 8
13
-63
MCS 9
12
-62
802.11n HT20
802.11n HT40 MCS 0, 1, 2, 3, 4, 8, 9, 10, 11, 12, 16, 17, 18, 19, 20
20
-85
19
-85
MCS 5, 13, 21
18
-74
18
-74
MCS 6, 14, 22
17
-73
16
-73
MCS 7, 15, 23
16
-71
14
-71
802.11ac VHT80