2 minute read
EGGER raw products for the door centre layer
Eurospan® raw chipboards
Doors with a raw chipboard middle layer have high mechanical strength. They also score with good thermal and sound insulation performance and are preferably used for functional doors, such as soundproof doors. The highquality middle layer can be decoratively coated with EGGER laminates.
Eurospan raw chipboard is available in thicknesses from 8 to 38 mm in the format 2,800 / 5,610 × 2,070 mm.
More about our Eurospan raw chipboard at: www.egger.com/raw-chipboards
Eurolight® Lightweight Boards
Eurolight Lightweight Boards are composite boards made of wood-based material top layers enclosing a lightweight cardboard honeycomb core. For door applications, 8 mm top layers are used, into which frames can be glued subsequently. Due to their lower weight and flexural rigidity, the resourcesaving lightweight boards are particularly suitable for sliding doors. Similar to solid chipboard, the top layers can be coated with decorative laminate.
Eurolight Lightweight Boards are available in the format 2,800 / 5,610 × 2,070 mm in the thicknesses 38 and 50 mm.
More about our lightweight boards at: www.egger.com/eurolight
Thin boards for door blanks and door skins
Thin chipboards raw (production goods)
OTHER ADVANTAGES
Good technical values due to the coarse middle layer
Fine surface which is ideal for further coating
OTHER ADVANTAGES
Ideal for lacquer finishes with high degree of gloss
3 mm thickness suitable for one-sided melamine decor coating with deep textures
For the raw thin chipboards, mainly high-quality fresh wood chips with a low bark content are used, which are pressed into a 3-layer structure. EGGER thin chipboards are available from 2.5 mm thickness in the formulas E1E05 TSCA P2 CE, JP F0.3 (F****) as well as a high-quality special formula E1E05 TSCA RAL P2 CE with ball drop test suitability, tested according to RAL quality requirements. The max. length is 6,000 mm. Widths of 1,850 mm or 2,100 mm are available.
Find out more at www.egger.com/thin-chipboards
Thin MDF E1E05 HD CE raw (production goods)
The thin E1E05 HD CE is a particularly fine, 900 kg/m³ high-density special thin MDF coreboard in accordance with EN 622-5 for highest quality lacquer or coating structures. The board is also suitable for subsequent 2D forming or embossing. Board thicknesses between 2.1 mm and 4.0 mm are available. The max. length is 6,000 mm. Production widths of 1,850 mm and 2,100 mm are available.
Find out more at www.egger.com/thin-mdf-boards
Thin boards with direct calender coating (production goods)
This thin board is a thin chipboard or thin MDF board coated on one side directly in the pressing process, e.g. with finishing or priming foil. The reverse side is available sanded or unsanded. The thickness spectrum ranges from 2.7 mm to 8 mm. Widths of 1,850 mm and 2,100 mm are available. The maximum length is 1,900 m (roll) or 8 m on pallet. Individual raw fixed dimensions are also available.
