EJOT TE 60/50 and TE 60/110 tube washer

EJOT Tube washer TE

For fastening External Thermal Insulation Composite Systems with problematic substrates

• To combine with EJOT SDF-S plus 8UB

• Available in two lengths

• With European Technical Assessment

• For surface fixed installation

• Can be combined with additional washers

EJOT SBL 140 plus and EJOT VT 90 • Washer diameter: 60 mm

• Special sealing plug made of polystyrene (EPS) included in the scope of supply

Technical Data

Shaft length EJOT TE 60/50 Shaft length EJOT TE 60/110 Washer diameter Screw drive Drill hole depth h1 ≥ Embedment depth hef ≥ Point thermal transmission EJOT TE 60/50 with insulation thicknesses 60 - 180 mm Point thermal transmission EJOT TE 60/110 with insulation thicknesses 120 - 150 mm Point thermal transmission EJOT TE 60/110 with insulation thicknesses 150 - 240 mm European Technical Assessment

50 mm 110 mm 60 mm TORX T30 80 mm 70 mm

0.002 W/K

0.00 W/K

0.001 W/K

ETA-04/0064

Building materials, sorted according to use categories and permissible loads

The loads specified apply only in combination with EJOT SDF-S plus 8UB.

The respective national safety factors must be considered for the permissible loads (e.g., Germany: 3). Please observe the approval.

Minimum requirements on the raw density and compression strength of stone according to the approval.

Application matrix with standard applications

EJOT TE 60/50 in combination with

EJOT SDF-S plus 8UB

Use categories A, B, C, E Embedment depth = 70 mm

1) Anchor length of EJOT SDF-S plus 8UB (mm) 10 30 50 70 90 110 60 100 120 140 160 180 200 80 120 140 160 180 200 220 100 140 160 180 200 220 120 160 180 200 220 140 180 200 220 160 200 220 180 220

Application matrix with standard applications

EJOT TE 60/110 in combination with

EJOT SDF-S plus 8UB

Use category A, B, C, E Embedment depth = 70 mm

1) Anchor length of EJOT SDF-S plus 8UB (mm) 10 30 50 70 90 110 120 100 120 140 160 180 200 140 120 140 160 180 200 220 160 140 160 180 200 220 180 160 180 200 220 200 180 200 220 220 200 220 240 220

Characteristic loads

A Normal weight concrete C 12/15 acc. to EN 206-1 A Normal weight concrete C 16/20 - C 50/60 acc. to EN 206-1 B Clay bricks (Mz) acc. to EN 771-1 / DIN 105 B Solid lime sandstone (KS) acc. to EN 771-2 / DIN EN 106 B Solid masonry of lightweight concrete (V) acc. to EN 771-3 / DIN 18152 C Vertically perforated clay bricks (Hlz) acc. to EN 771-1 / DIN 105 C Sand-lime perforated bricks (KSL) acc. to EN 771-2 / DIN EN 106 C Lightweight concrete hollow blocks (HbL) acc. to EN 771-3 / DIN 18151 E Autoclaved aerated concrete AAC 4 acc. to EN 771-4 / DIN V 4165-1

1.5 kN 1.5 kN 1.5 kN 1.5 kN 0.9 kN 1.2 kN 1.5 kN 0.75 kN 0.6 kN

Insulation thickness Anchor length1) with possible tolerance compensation (adhesive and existing render)

Insulation thickness Anchor length1) with possible tolerance compensation (adhesive and existing render)

Product range

Product name and length (mm)

EJOT TE 60/50 EJOT TE 60/110

Note: always use the enclosed plugs. Article number

8533 050 000 8533 110 000 Packaging unit (pcs.) 100 100