Sealcon Liquid Tight Strain Reliefs & Accessories by Electronic Expeditors

Liquid Tight Strain R Relief li f Fi Fittings, i q g Stra Str d i S Accessories & Conduit System nduit Our Service difference!! O S i makes k the h mak he diff

UL746C f1 C Committed To Excellence! e!

Table of Contents Nylon Strain Relief Fittings

Strain Relief Accessories

Page

3 4 5 6 7 8 9 9 10 11 12

Description Nylon Fittings - Introduction Straight Dome/Flex - PG/NPT Threads Straight Dome/Flex - Metric Threads Straight Dome/Flex - Elongated PG/Metric Threads Straight Dome/Flex - Reduced/Enlarged Body - PG Elbow Dome/Flex - PG/NPT & Metric Threads High Performance w/ Clamp - PG & Metric Threads Romex® Fittings for Flat Cable Multi-Hole Fittings - PG Threads Multi-Hole Fittings - NPT Threads Multi-Hole Fittings - Metric Threads

ROMEX® is a federally registered trademark of Southwire Company.

Nickel Plated Brass Fittings Page 13 14 15 15 16 17 17 17 18 19 20 20 21 21 22 23 24

Description Nickel Plated Brass Fittings - Introduction ion Straight Dome/Flex - PG/NPT & Metric Threads Mini WADI - Smallest Cable O.D. - PG & Metric WADI XL - Largest Cable O.D. - Metric & BSPP Straight Dome/Flex - Elongated PG/Metric Threads Elbow Dome - PG/Metric Threads & Flange Clamp High Performance - PG/NPT/Metric Clamp High Performance - Elongated PG/Metric EMI/RFI Fittings: Product Features EMI/RFI Fittings: Applications & Assembly EMI/RFI: Standard - PG/NPT/Metric Threads EMI/RFI: Standard - Elongated PG/Metric EMI/RFI: Feed-Through - PG/NPT/Metric Threads EMI/RFI: Feed-Through - Elongated PG/Metric Multi-Hole Fittings - PG Threads Multi-Hole Fittings - NPT Threads Multi-Hole Fittings - Metric Threads

PVDF & Stainless Steel Fittings ng gs Page 25 26 26 27

28 29 30 30 31 31 32 32 33

Description Locking Nuts: Nylon, Nickel Plated Brass & Accessorie Overview Locking Nuts: EMI/RFI, Stainless Steel, Zinc Plated Steel O-Rings & Seal Rings Blind Plugs - Nylon Dome Plugs - Nylon & Nickel Plated Brass Hex Plugs - Black Nylon & Nickel Plated Brass Hex Plugs - Stainless Steel Cable Clamp - Nickel Plated Brass Socket & Ratchet Wrenches

Adapters, Reducers, Enlargers Page 34 35 36 37 38 39

Description Adapters - Nickel Plated Brass & Aluminum Adapters - Black Nylon Reducers - Nickel Plated Brass (Hex & Round) Reducers - Black & Gray Nylon Reducers - Stainless Steel Enlargers - Black Nylon & Nickel Plated Brass

Conduit System Page 40 40 40 41 42 43 43 44 44

Description Conduit System - Introduction Corrugated Conduit: Standard/Super per Flex Mounting Brackets Push-In Fittings Turn-to-Seal Fittings Snapclic-DUO Fittings - Black Nylon Snapclic-DUO Fittings - Nickel Plated Brass Double-Seal Fittings Flange/Bulkhead Fittings

Description PVDF (Viton®/Teflon®) - PG/NPT & Metric PVDF (Viton® Nickel Plated Brass) - PG/NPT & Metric PVDF (Viton® Nickel Plated Brass) - Elongat. PG/Metric Stainless Steel Fittings (303/316) - PG/NPT & Metric

Teflon® is a federally registered trademark of DuPont Dow Elastomer.

Why choose Sealcon as your cable management partner?

Technical Information Page 45 46 47 48 48 49

Description Material Specifications & Temperature Ranges NEMA Ratings IP Ratings Sizes & Dimensions for Sealcon Fittings Torque Specifications & Pull-Test Rating Thread Specifications (NPT, Metric, PG, BSPP)

Sealcon was founded in the fall of 1989 in Centennial, Colorado. Our goal is to provide customers with the best Other Products / Index possible cable management solutions. We are proud to Page Description represent Hummel, the leading German manufacturer of Liquid Tight Strain Relief Fittings, Cord Grips, Cable Glands, 50 Circular Connectors (M16, M23, M27, M40, etc.) Circular Connectors, Industrial Enclosures, Flexible Conduit, 51 Cable Glands for Armored / Non-Armored Areas and Other Cable & Wire Accessory Products. These products 52 Cable Glands for Hazardous / Explosion Proof Areas meet RoHS, Deca BDE, Reach, UL, UR, CSA, VDE, CE, TÜV, 53 Industrial Enclosures (Plastic & Metal) German Lloyd, PCT, SZU, Gost, EX-e, Ex-d, IECEx, ATEX 54 P/N Index / Cross Reference approvals. Hummel is ISO 9001 quality certified and has continuously developed leading edge technology solutions. We can usually ship your order within 24 hours from our central warehouse in Colorado. We replenish our inventory weekly and can respond to changing demands quickly. This catalog is a condensed version of the Hummel master catalog, which is available to our customers upon request. Our experienced staff will help to answer any technical questions and recommend the correct samples for evaluation. Purchase orders, received before noon MST are often shipped the same day. Please give us a call so we can help you with your application requirements. Sample your application or request your catalog today! Hanspeter & Daniel Spühler, Owners

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Features & Benefits Features & Beneﬁts: Liquid Tight - Submersible to 300 ft. - NEMA 4x & 6 (IP 68 / IP 69K) UL f1 (746C) - UV / Ozone Stable - Solar / Photovoltaic Industry Highest Pressure Rating - Patented form seal meets 150 PSIG (10 BAR) Flame Protected - V0 Rated According to UL 94 Halogen- and Phosphorous-Free Materials Safety - Ratchet to prevent Dome from coming loose under vibration Large selection - Cable Range from .08” (2 mm) to 1.38” (35 mm) Non-Corrosive - Resistant to salt water, weak acids, weak alkalis, alcohol, esters, ketones, ether, gasoline, mineral, animal & vegetable oil • Durable - Rugged Construction • Environmentally Compliant - RoHS & Deca BDE

UL/UR CSA VDE CAGE PATENT

E103997 074032 71339 0 UE114 4145075

Nickel Plated Brass

• • • • • • • •

uct e P ro d Uniqu

PVDF / Steel

Your One Stop Solution For All Cable & Wire Accessories! Pull-out Resistance & Cable Protection Overlapping clamping splines apply a concentric force, thereby preventing the form seal from being pulled out of the fitting. This ensures pull-out protection without damage to the cable.

Accessories

Submersible The patented recess and high performance seal guarantees NEMA 4x & 6 (IP 68 / IP 69K) at 150 PSIG (10 bar).

Adapter,Reducer,Enlarger

Rugged Construction The self locking ACME thread prevents the dome nut from being pulled out under extreme lateral force.

S Standard, Reduced and Multi-Hole Inserts M Modularity: Increase and decrease M ccable opening by swapping out iinserts to accommodate various ccable able sizes & configurations. gu

UL746C f1

ULf1 (746C) Photovoltaic Industry All Black Nylon (Dome & Flex) Strain Relief Fittings, Cord Grips, Cable Glands are now made with UV / Ozone Stable material.

Technical Information

Time Saving Installation Simply push the cable through h Strain S i R Relief li f Fi Fitting i - Tighten Dome or Flex Nut - Done! No disassembly of the Fitting required: Insert Cable - Tighten Nut - Finished!

Conduit System

Liquid Tight Molded groove for an optional O-Ring. The use of an O-Ring results in a liquid tight seal between fitting and housing.

Elbow Fittings For Sp Space and time saving installations: Open Elbow - Insert cable - Snap close - Tighten Nut - Finished! Available with Dome or Flex Nut. Availa NOTE: Nylon Fittings do not come with an O-Ring.

Other Products / Index

Flex N Nut Kinking and chafing of Kinkin the ca cable is eliminated.

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Standard - PG & NPT Threads *

Part Numbers Dome Fittings

Nickel Plated Brass

Black

Gray

Cable Range Flex Fittings

Thread Type & Size

Grayy

Black

Conduit System

Adapter,Reducer,Enlarger

Accessories

PVDF / Steel

See page 49 for thread specs

Inches (mm) .12 - .26 (3 - 6.5) PG 7 / 1/4” NPT .08 - .20 (2 - 5) .16 - .31 (4 - 8) PG 9 .08 - .24 (2 - 6) .20 - .39 (5 - 10) PG 11 .12 - .28 (3 - 7) .24 - .47 (6 - 12) PG 13 / 13.5 .20 - .35 (5 - 9) .39 - .55 (10 - 14) PG 16 .28 - .47 (7 - 12) .51 - .71 (13 - 18) PG 21 .35 - .63 (9 - 16) .71 - .98 (18 - 25) PG 29 .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) PG 36 .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) PG 42 .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) PG 48 1.14 - 1.38 (29 - 35)

CD07AA-BK CD07AR-BK CD09AA-BK CD09AR-BK CD11AA-BK CD11AR-BK CD13AA-BK CD13AR-BK CD16AA-BK CD16AR-BK CD21AA-BK CD21AR-BK CD29AA-BK CD29AR-BK CD36AA-BK CD36AR-BK CD42AA-BK CD42AR-BK CD48AA-BK CD48AR-BK

CD07AA-GY CD07AR-GY CD09AA-GY CD09AR-GY CD11AA-GY CD11AR-GY CD13AA-GY CD13AR-GY CD16AA-GY CD16AR-GY CD21AA-GY CD21AR-GY CD29AA-GY CD29AR-GY CD36AA-GY CD36AR-GY CD42AA-GY CD42AR-GY CD48AA-GY CD48AR-GY

CF07AA-BK CF07AR-BK CF09AA-BK CF09AR-BK CF11AA-BK CF11AR-BK CF13AA-BK CF13AR-BK CF16AA-BK CF16AR-BK CF21AA-BK CF21AR-BK -

CF07AA-GY F07A CF07AR-GY CF09AA-GY CF09AR-GY CF11AA-GY CF11AR-GY CF13AA-GY CF13AR-GY CF16AA-GY CF16AR-GY CF21AA-GY CF21AR-GY -

CD09NA-BK CD09NR-BK CD13NA-BK CD13NR-BK CD16NA-BK CD16NR-BK CD21NA-BK CD21NR-BK CD29NA-BK CD29NR-BK CD29LA-BK CD29LR-BK CD36NA-BK CD36NR-BK

CD09NA-GY CD09NR-GY CD13NA-GY CD13NR-GY CD16NA-GY CD16NR-GY CD21NA-GY CD21NR-GY CD29NA-GY CD29NR-GY CD29LA-GY CD29LR-GY CD36NA-GY CD36NR-GY

CF09NA-BK CF09NR-BK CF13NA-BK CF13NR-BK CF16NA-BK CF16NR-BK CF21NA-BK CF21NR-BK -

CF09NA-GY .16 - .31 (4 - 8) 3/8” NPT CF09NR-GY .08 - .24 (2 - 6) CF13NA-GY .24 - .47 (6 - 12) 1/2” NPT CF13NR-GY .20 - .35 (5 - 9) CF16NA-GY .39 - .55 (10 - 14) 1/2” NPT CF16NR-GY .28 - .47 (7 - 12) CF21NA-GY .51 - .71 (13 - 18) 3/4” NPT CF21NR-GY .35 - .63 (9 - 16) .71 - .98 (18 - 25) 1” NPT .51 - .79 (13 - 20) .71 - .98 (18 - 25) 1-1/4” NPT .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) 1-1/2” NPT .79 - 1.02 (20 - 26)

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

.49 (12.5)

.83 (21)

2.13 (54)

.31 (8)

.59 (15)

.60 (15.2)

.87 (22)

2.48 (63)

.31 (8)

.75 (19)

.73 (18.5)

.98 (25)

3.07 (78)

.31 (8)

.87 (22) / .75 (19)

.80 (20.3)

1.06 (27)

3.54 (90)

.35 (9)

.94 (24)

.89 (22.5)

1.10 (28)

3.94 (100)

.39 (10)

1.06 (27)

1.12 (28.4) 1.22 (31)

4.49 (114)

.43 (11)

1.30 (33)

1.47 (37.3) 1.54 (39)

.43 (11)

1.65 (42)

1.89 (48)

.51 (13)

2.09 (53)

2.13 (54.1) 1.93 (49)

.51 (13)

2.36 (60)

2.34 (59.4) 1.93 (49)

.55 (14)

2.56 (65)

+ .01” (+.25 mm)

1.85 (47)

.68 (17.2)

.87 (22)

2.48 (63)

.59 (15)

.87 (22) / .75 (19)

.83 (21.1)

1.06 (27)

3.54 (90)

.51 (13)

.94 (24)

.83 (21.1)

1.10 (28)

3.94 (100)

.51 (13)

1.06 (27)

1.05 (26.7) 1.22 (31)

4.49 (114)

.55 (14)

1.30 (33)

1.35 (34.3) 1.54 (39)

.75 (19)

1.65 (42)

1.65 (41.9) 1.54 (39)

.63 (16)

1.81 (46) / 1.65 (42)

1.92 (48.7) 1.89 (48)

.79 (20)

2.09 (53)

Dome Fittings also available with the following approvals:

The straight PG 7 thread fits a 1/4” NPT female or 1/2”-20 UNF thread. Nylon Dome Fittings also available in Blue (xxxxxx-BL).

Other Products / Index

Technical Information

*Note: UL F1 rating applies to Black Nylon Fittings only.

(See Page 5)

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

For Material Specifications please refer to page ge 45 45. Dimensions and specifications may be changed without priorr notice.

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Standard - Metric Threads *

Part Numbers Dome Fittings Black

Cable Range

Thread Type & Size

Flex Fittings

Gray

Black

Gray

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

M12 x 1.5

.47 (12)

.83 (21)

2.13 (54)

.31 (8)

.59 (15)

M16 x 1.5

.63 (16)

.87 (22)

2.48 (63)

.31 (8)

.75 (19)

M16 x 1.5

.63 (16)

.98 (25)

3.07 (78)

.31 (8)

.87 (22)

M20 x 1.5

.79 (20)

1.06 (27)

3.54 (90)

.35 (9)

.94 (24)

M20 x 1.5

.79 (20)

1.10 (28)

3.94 (100)

.35 (9)

1.06 (27)

M25 x 1.5

.98 (25)

1.22 (31)

4.49 (114)

.43 (11)

1.30 (33)

M32 x 1.5

1.26 (32)

1.54 (39)

.43 (11)

1.65 (42)

M40 x 1.5

1.57 (40)

1.89 (48)

.51 (13)

2.09 (53)

M50 x 1.5

1.97 (50)

1.93 (49)

.51 (13)

2.36 (60)

M63 x 1.5

2.48 (63)

1.93 (49)

.55 (14)

2.56 (65) / 2.68 (68)

Accessories

+ .01â&#x20AC;? (+.25 mm)

PVDF / Steel

See page 49 for thread specs

Nickel Plated Brass

Dome Fittings also available with the following approvals:

*Note: UL F1 rating applies to Black Nylon Fittings only.

Adapter,Reducer,Enlarger

CD12MA-BK CD12MA-GY CF12MA-BK CF12MA-GY F12 CD12MR-BK CD12MR-GY CF12MR-BK CF12MR-GY CD16MA-BK CD16MA-GY CF16MA-BK CF16MA-GY CD16MR-BK CD16MR-GY CF16MR-BK CF16MR-GY CD17MA-BK CD17MA-GY CF17MA-BK CF17MA-GY CD17MR-BK CD17MR-GY CF17MR-BK CF17MR-GY CD20MA-BK CD20MA-GY CF20MA-BK CF20MA-GY CD20MR-BK CD20MR-GY CF20MR-BK CF20MR-GY CD22MA-BK CD22MA-GY CF22MA-BK CF22MA-GY CD22MR-BK CD22MR-GY CF22MR-BK CF22MR-GY CD25MA-BK CD25MA-GY CF25MA-BK CF25MA-GY CD25MR-BK CD25MR-GY CF25MR-BK CF25MR-GY CD32MA-BK CD32MA-GY CD32MR-BK CD32MR-GY CD40MA-BK CD40MA-GY CD40MR-BK CD40MR-GY CD50MA-BK CD50MA-GY CD50MR-BK CD50MR-GY CD63MA-BK CD63MA-GY CD63MR-BK CD63MR-GY Nylon Dome Fittings also available in Blue (xxxxxx-BL).

Inches (mm) .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7 - 12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35)

Dimensions in Inches (mm)

Op Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29. Ac

Conduit System Technical Information

F1/F

Installs in either knockout or threaded holes.

Other Products / Index

F1/F

Suggested Clearance Hole for Non-Threaded Mounting

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Elongated - PG & Metric Threads *

Part Numbers Dome Fittings

Nickel Plated Brass

Thread Type & Size

Flex Fittings

Gray

Black

Cable Range

Black

Gray

See page 49 for thread specs

Adapter,Reducer,Enlarger

Accessories

PVDF / Steel

CD07CA-BK CD07CR-BK CD09CA-BK CD09CR-BK CD11CA-BK CD11CR-BK CD13CA-BK CD13CR-BK CD16CA-BK CD16CR-BK CD21CA-BK CD21CR-BK CD29CA-BK CD29CR-BK CD36CA-BK CD36CR-BK CD42CA-BK CD42CR-BK CD48CA-BK CD48CR-BK

CD0 CD07CA-GY CD07CR-GY CD09CA-GY CD09CR-GY CD11CA-GY CD11CR-GY CD13CA-GY CD13CR-GY CD16CA-GY CD16CR-GY CD21CA-GY CD21CR-GY CD29CA-GY CD29CR-GY CD36CA-GY CD36CR-GY CD42CA-GY CD42CR-GY CD48CA-GY CD48CR-GY

CF CF07CA-BK CF07CR-BK CF09CA-BK CF09CR-BK CF11CA-BK CF11CR-BK CF13CA-BK CF13CR-BK CF16CA-BK CF16CR-BK CF21CA-BK CF21CR-BK -

CF07CA-GY CF07CR-GY CF09CA-GY CF09CR-GY CF11CA-GY CF11CR-GY CF13CA-GY CF13CR-GY CF16CA-GY CF16CR-GY CF21CA-GY CF21CR-GY -

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Inches (mm) .12 - .26 (3 - 6.5) PG 7 .08 - .20 (2 - 5) .16 - .31 (4 - 8) PG 9 .08 - .24 (2 - 6) .20 - .39 (5 - 10) PG 11 .12 - .28 (3 - 7) .24 - .47 (6 - 12) PG 13 / 13.5 .20 - .35 (5 - 9) .39 - .55 (10 - 14) PG 16 .28 - .47 (7 - 12) .51 - .71 (13 - 18) PG 21 .35 - .63 (9 - 16) .71 - .98 (18 - 25) PG 29 .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) PG 36 .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) PG 42 .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) PG 48 1.14 - 1.38 (29 - 35)

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

.49 (12.5)

.83 (21)

2.13 (54)

.59 (15)

.60 (15.2)

.87 (22)

2.48 (63)

.59 (15)

.75 (19)

.73 (18.5)

.98 (25)

3.07 (78)

.59 (15)

.87 (22)

.80 (20.3)

1.06 (27)

3.54 (90)

.59 (15)

.94 (24)

.89 (22.5)

1.10 (28)

3.94 (100)

.59 (15)

1.06 (27)

1.12 (28.4) 1.22 (31)

4.49 (114)

.59 (15)

1.30 (33)

1.47 (37.3) 1.54 (39)

.59 (15)

1.65 (42)

1.89 (48)

.71 (18)

2.09 (53)

2.13 (54.1) 1.93 (49)

.71 (18)

2.36 (60)

2.34 (59.4) 1.93 (49)

.71 (18)

2.56 (65)

+ .01” (+.25 mm)

1.85 (47)

Elongated is recommend where the Strain Relief has to pass through a thick wall or the application just needs the Extra Thread Length. Nylon Dome Fittings also available in Blue (xxxxxx-BL). *Note: UL F1 rating applies to Black Nylon Fittings only.

F1/F

Wall

F1/F Wall

Conduit System

Other Products / Index

Technical Information

CD12DA-BK CD12DR-BK CD16DA-BK CD16DR-BK CD17DA-BK CD17DR-BK CD20DA-BK CD20DR-BK CD22DA-BK CD22DR-BK CD25DA-BK CD25DR-BK CD32DA-BK CD32DR-BK CD40DA-BK CD40DR-BK CD50DA-BK CD50DR-BK CD63DA-BK CD63DR-BK 6

CD12DA-GY CD12DR-GY CD16DA-GY CD16DR-GY CD17DA-GY CD17DR-GY CD20DA-GY CD20DR-GY CD22DA-GY CD22DR-GY CD25DA-GY CD25DR-GY CD32DA-GY CD32DR-GY CD40DA-GY CD40DR-GY CD50DA-GY CD50DR-GY CD63DA-GY CD63DR-GY

CF12DA-BK CF12DR-BK CF16DA-BK CF16DR-BK CF17DA-BK CF17DR-BK CF20DA-BK CF20DR-BK CF22DA-BK CF22DR-BK CF25DA-BK CF25DR-BK -

Dome Fittings also available with the following approvals:

Suggested Clearance Hole for Non-Threaded Mounting

CF12DA-GY CF12DR-GY CF16DA-GY CF16DR-GY CF17DA-GY CF17DR-GY CF20DA-GY CF20DR-GY CF22DA-GY CF22DR-GY CF25DA-GY CF25DR-GY -

.12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7 - 12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 - 35)

M12 x 1.5

.47 (12)

.83 (21)

2.13 (54)

.59 (15)

M16 x 1.5

.63 (16)

.87 (22)

2.48 (63)

.59 (15)

.75 (19)

M16 x 1.5

.63 (16)

.98 (25)

3.07 (78)

.59 (15)

.87 (22)

M20 x 1.5

.79 (20)

1.06 (27)

3.54 (90)

.59 (15)

.94 (24)

M20 x 1.5

.79 (20)

1.10 (28)

3.94 (100)

.59 (15)

1.06 (27)

M25 x 1.5

.98 (25)

1.22 (31)

4.49 (114)

.59 (15)

1.30 (33)

M32 x 1.5

1.26 (32)

1.54 (39)

.59 (15)

1.65 (42)

M40 x 1.5

1.57 (40)

1.89 (48)

.71 (18)

2.09 (53)

M50 x 1.5

1.97 (50)

1.93 (49)

.71 (18)

2.36 (60)

M63 x 1.5

2.48 (63)

1.93 (49)

.71 (18)

2.56 (65) / 2.68 (68)

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Reduced Body - PG Threads *

Strain Relief with Reduced Body Part Numbers Dome Fittings

Flex Fittings

Gray

Black

CD09BA-GY CD09BR-GY CD11BA-GY CD11BR-GY CD13BA-GY CD13BR-GY CD16BA-GY CD16BR-GY CD21BA-GY -GY CD21BR-GY

Gray

CF09BA-BK CF09BR-BK CF11BA-BK CF11BR-BK CF13BA-BK CF13BR-BK CF16BA-BK CF16BR-BK CF21BA-BK CF21BR-BK

Inches (mm) .11 - .26 (3-6.5) .08 - .20 (2-5) .16 - .31 (4-8) .08 - .24 (2-6) .20 - .39 (5-10) .11 - .28 (3-7) .24 - .47 (6-12) .20 - .35 (5-9) .39 - .55 (10-14) .27 - .47 (7-12)

CF09BA-GY CF09BR-GY CF11BA-GY CF11BR-GY CF13BA-GY CF13BR-GY CF16BA-GY CF16BR-GY CF21BA-GY CF21BR-GY

F1/F

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

See page 49 for thread specs

+ .01” (+.25 mm)

PG 9

.60 (15.2)

.83 (21)

2.13 (54)

.31 (8)

PG 11

.73 (18.5)

.87 (22)

2.48 (63)

.31 (8)

PG 13 / 13.5

.80 (20.3)

.98 (25)

3.07 (78)

.35 (9)

PG 16

.89 (22.5)

1.06 (27)

3.54 (90)

.39 (10)

PG 21

1.12 (28.4) 1.10 (28)

3.94 (100)

.43 (11)

.59 (15) / .75 (19) .75 (19) / .87 (22) .87 (22) / .94 (24) .94 (24) / 1.06 (27) 1.06 (27) / 1.30 ((33)

PVDF / Steel

CD09BA-BK CD09BR-BK CD11BA-BK CD11BR-BK CD13BA-BK CD13BR-BK CD16BA-BK CD16BR-BK CD21BA-BK CD21BR-BK

Thread Type & Size

Nickel Plated Brass

Black

Cable Range

When your cable diameter Decreases, but your thread remains the same.

F1/F

A B

D D

Accessories

Nylon Dome Fittings also available in Blue (xxxxxx-BL). Suggested Clearance Hole for Non-Threaded Mounting

Nylon Liquid Tight Strain Relief Fittings Adapter,Reducer,Enlarger

Enlarged Body - PG Threads

Strain Relief with Enlarged Body Part Numbers Dome Fittings Black

Gray

CF07GA-BK CF07GR-BK CF09GA-BK CF09GR-BK CF11GA-BK CF11GR-BK CF13GA-BK CF13GR-BK CF16GA-BK CF16GR-BK

Gray

CF07GA-GY CF07GR-GY CF09GA-GY CF09GR-GY CF11GA-GY CF11GR-GY CF13GA-GY CF13GR-GY CF16GA-GY CF16GR-GY

Dome Fittings also available with the following approvals:

Inches (mm) .16 - .31 (4-8) .08 - .24 (2-6) .20 - .39 (5-10) .11 - .27 (3-7) .24 - .47 (6-12) .20 - .35 (5-9) .39 - .55 (10-14) .27 - .47 (7-12) .51 - .71 (13-18) .35 - .63 (9-16)

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

See page 49 for thread specs

+ .01” (+.25 mm)

PG 7 / 1/4” NPT

.49 (12.5)

.87 (22)

2.48 (63)

.31 (8)

.75 (19)

PG 9

.60 (15.2)

.98 (25)

3.07 (78)

.31 (8)

.87 (22)

PG 11

.73 (18.5)

1.06 (27)

3.54 (90)

.31 (8)

.94 (24)

PG 13 / 13.5 .80 (20.3)

1.10 (28)

3.94 (100)

.35 (9)

1.06 (27)

1.22 (31)

4.49 (114)

.39 (10)

1.30 (33)

PG 16

.89 (22.5)

Technical Information

CD07GA-GY CD07GR-GY CD09GA-GY CD09GR-GY CD11GA-GY CD11GR-GY CD13GA-GY CD13GR-GY CD16GA-GY CD16GR-GY

Flex Fittings Black

Thread Type & Size

Conduit System

CD07GA-BK CD07GR-BK CD09GA-BK CD09GR-BK CD11GA-BK CD11GR-BK CD13GA-BK CD13GR-BK CD16GA-BK CD16GR-BK

Cable Range

When your cable diameter Increases, but your thread remains the same. F1/F

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

A B

Other Products / Index

*Note: UL F1 rating applies to Black Nylon Fittings only. F1/F

Suggested Clearance Hole for Non-Threaded Mounting

D Dimensions and spe specifications may be changed without prior notice.

For Material Specifications please refer to page 45.

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings 90º Snap Elbow - PG/NPT/Metric Threads Part Numbers Dome Fittings

Nickel Plated Brass

Bla Black

Gr Gray

Cable Range

Flex Fittings ings Gray

Black

Conduit System

Adapter,Reducer,Enlarger

Accessories

PVDF / Steel

In Inches (mm)

Thread Type & Size

See page 49 for thread specs

Dimensions in Inches (mm) A

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Height

Thread Length

Wrench Flats

1.77 (45)

3.35 (85)

.91 (23)

.31 (8)

.75 (19)

1.97 (50)

4.05 (103)

1.06 (27)

.31 (8)

.87 (22)

2.24 (57)

4.69 (119)

1.20 (30.5)

.35 (9)

.94 (24)

2.32 (59)

5.12 (130)

1.28 (32)

.39 (10)

1.06 (27)

2.87 (73)

6.14 (156)

1.57 (40)

.43 (11)

1.30 (33)

3.58 (91)

2.03 (51.5)

.43 (11)

1.65 (42)

+ .01” (+.25 mm)

ED09AA-BK AA ED09AR-BK ED11AA-BK ED11AR-BK ED13AA-BK ED13AR-BK ED16AA-BK ED16AR-BK ED21AA-BK ED21AR-BK ED29AA-BK ED29AR-BK

ED09AA-GY AA ED09AR-GY ED11AA-GY ED11AR-GY ED13AA-GY ED13AR-GY ED16AA-GY ED16AR-GY ED21AA-GY ED21AR-GY ED29AA-GY ED29AR-GY

EF09AA-BK EF09AR-BK EF11AA-BK EF11AR-BK EF13AA-BK EF13AR-BK EF16AA-BK EF16AR-BK EF21AA-BK EF21AR-BK -

EF09AA-GY 9AA-GY EF09AR-GY GY EF11AA-GY EF11AR-GY EF13AA-GY EF13AR-GY EF16AA-GY EF16AR-GY EF21AA-GY EF21AR-GY -

.16 - .31 (4-8) PG 9 .60 (15.2) .08 - .24 (2-6) .20 - .39 (5-10) PG 11 .73 (18.5) .11 - .28 (3-7) .24 - .47 (6-12) PG 13 / 13.5 .80 (20.3) .20 - .35 (5-9) .39 - .55 (10-14) PG 16 .89 (22.5) .27 - .47 (7-12) .51 - .71 (13-18) PG 21 1.12 (28.4) .35 - .63 (9-16) .71 - .98 (18-25) PG 29 1.47 (37.3) .51 - .79 (13-20)

ED09NA-BK ED09NR-BK ED13NA-BK ED13NR-BK ED16NA-BK ED16NR-BK ED21NA-BK ED21NR-BK ED29NA-BK ED29NR-BK

ED09NA-GY ED09NR-GY ED13NA-GY ED13NR-GY ED16NA-GY ED16NR-GY ED21NA-GY ED21NR-GY ED29NA-GY ED29NR-GY

EF09NA-BK EF09NR-BK EF13NA-BK EF13NR-BK EF16NA-BK EF16NR-BK EF21NA-BK EF21NR-BK -

EF09NA-GY EF09NR-GY EF13NA-GY EF13NR-GY EF16NA-GY EF16NR-GY EF21NA-GY EF21NR-GY -

.16 - .31 (4-8) .08 - .24 (2-6) .24 - .47 (6-12) .20 - .35 (5-9) .39 - .55 (10-14) .27 - .47 (7-12) .51 - .71 (13-18) .35 - .63 (9-16) .71 - .98 (18-25) .51 - .79 (13-20)

ED16MA-BK ED16MR-BK ED20MA-BK ED20MR-BK ED25MA-BK ED25MR-BK ED32MA-BK ED32MR-BK

ED16MA-GY ED16MR-GY ED20MA-GY ED20MR-GY ED25MA-GY ED25MR-GY ED32MA-GY ED32MR-GY

EF16MA-BK EF16MR-BK EF20MA-BK EF20MR-BK EF25MA-BK EF25MR-BK -

EF16MA-GY .16 - .31 (4-8) EF16MR-GY .08 - .24 (2-6) EF20MA-GY .24 - .47 (6-12) EF20MR-GY .20 - .35 (5-9) EF25MA-GY .51 - .71 (13-18) EF25MR-GY .35 - .63 (9-16) .71 - .98 (18-25) .51 - .79 (13-20)

3/8” NPT

.68 (17.2)

1.77 (45)

3.35 (85)

.91 (23)

.59 (15)

.75 (19)

1/2” NPT

.83 (21.1)

2.24 (57)

4.69 (119)

1.20 (30.5)

.51 (13)

.94 (24)

1/2” NPT

.83 (21.1)

2.32 (59)

5.12 (130)

1.24 (31.5)

.51 (13)

1.06 (27)

3/4” NPT

1.05 (26.7)

2.87 (73)

6.14 (156)

1.57 (40)

.51 (13)

1.30 (33)

1” NPT

1.35 (34.3)

3.58 (91)

1.97 (50)

.75 (19)

1.65 (42)

M16 x 1.5

.63 (16)

1.77 (45)

3.35 (85)

.91 (23)

.31 (8)

.75 (19)

M20 x 1.5

.79 (20)

2.24 (57)

4.68 (119)

1.20 (30.5)

.35 (9)

.94 (24)

M25 x 1.5

.98 (25)

2.87 (73)

6.14 (156)

1.57 (40)

.43 (11)

1.30 (33)

M32 x 1.5

1.26 (32)

3.58 (91)

2.03 (51.5)

.43 (11)

1.65 (42)

Liquid Tight Elbow Strain Relief Fitting for space and time saving applications.

Technical Information

Swivel Elbow also available! Visit www.sealconusa.com for product information.

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Suggested Clearance Hole for Non-Threaded Mounting

D D

Other Products / Index

Wrench Flat (F)

For Material Specifications ecifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Wrench Flat (F)

Liquid Tight Strain Relief Fitting with Anodized Aluminum Clamp for extra Pull-out Resistance

High Performance Fittings with Clamp Part Numbers

Cable Range

Clamp Fittings

Thread Type & Size

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length

Thread Length

Wrench Flats

.60 (15.2) 1.14 (29) .73 (18.5) 1.28 (32.5)

.59 (15) .59 (15)

.75 (19) .87 (22)

.80 (20.3) 1.40 (35.5)

.59 (15)

.94 (24)

.89 (22.5) 1.48 (37.5) 1.12 (28.4) 1.61 (41) 1.47 (37.3) 1.93 (49) 1.85 (47) 2.28 (58) 2.13 (54.1) 2.42 (61.5) 2.34 (59.4) 2.44 (62)

.39 (10) .43 (11) .43 (11) .51 (13) .51 (13) .55 (14)

1.06 (27) 1.30 (33) 1.65 (42) 2.09 (53) 2.36 (60) 2.56 (65) .75 (19) .94 (24) 1.30 (33) 1.65 (42) 2.09 (53) 2.36 (60) 2.56 (65) / 2.68 (68)

+ .01” (+.25 mm)

.24 - .47 (6 -12)

CD16AA-CP CD21AA-CP CD29AA-CP CD36AA-CP CD42AA-CP CD48AA-CP

.39 - .55 (10 -14) .51 - .71 (13 - 18) .71 - .98 (18 - 25) .87 - 1.26 (22 - 32) 1.26 - 1.50 (32 - 38) 1.46 - 1.73 (37 - 44)

CD16MA-CP CD20MA-CP CD25MA-CP CD32MA-CP CD40MA-CP CD50MA-CP

.16 - .31 (4 - 8) .24 - .47 (6 - 12) .51 - .71 (13 - 18) .71 - .98 (18 - 25) .87 - 1.26 (22 - 32) 1.26 - 1.50 (32 - 38)

M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

.63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50)

1.14 (29) 1.40 (35.5) 1.61 (41) 1.93 (49) 2.28 (58) 2.42 (61.5)

.59 (15) .59 (15) .43 (11) .43 (11) .51 (13) .51 (13)

CD63MA-CP

1.46 - 1.73 (37 - 44) M63 x 1.5

2.48 (63)

2.44 (62)

.55 (14)

Dome Fittings also available with the following approvals:

Part Numbers Black

Gray

Slot Size

See page 49 for thread specs

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length

Thread Length

Wrench Flats

+ .01” (+.25 mm)

CD13AS-A1*

CD16AS-01 CD16AS-03 CD16AS-05 CD21AS-01 CD21AS-03

CD16AS-02 CD16AS-04 CD16AS-06 CD21AS-02 CD21AS-04

PG 13 / .17 x .41 (4.2 x 10.4) .80 (20.3) 1.06 (27) .35 (9) 13.5 .24 x .55 (6 x 14) PG 16 .20 x .45 (5 x 11.5) .89 (22.5) 1.10 (28) .39 (10) .28 x .47 (7 x 12) .24 x .55 (6 x 14) PG 21 1.12 (28.4) 1.22 (31) .43 (11) .28 x .55 (7 x 14)

CD13NS-A1* CD16NS-01 CD16NS-03 CD16NS-05 CD21NS-01 CD21NS-03 CD29NS-01

CD16NS-02 CD16NS-04 CD16NS-06 CD21NS-02 CD21NS-04 -

.17 x .41 (4.2 x 10.4) .24 x .55 (6 x 14) 1/2” NPT .20 x .45 (5 x 11.5) .28 x .47 (7 x 12) .24 x .55 (6 x 14) 3/4” NPT .28 x .55 (7 x 14) 1” NPT .31 x .87 (8 x 22)

CD20MS-A1* CD20MS-01 CD20MS-03 CD20MS-05 CD25MS-01 CD25MS-03

CD20MS-02 CD20MS-04 CD20MS-06 CD25MS-02 CD25MS-04

.17 x .41 (4.2 x 10.4) .24 x .55 (6 x 14) M20 x 1.5 .20 x .45 (5 x 11.5) .28 x .47 (7 x 12) .24 x .55 (6 x 14) M25 x 1.5 .28 x .55 (7 x 14)

.94 (24) 1.06 (27) 1.30 (33)

.83 (21.1) 1.06 (27) .51 (13)

.94 (24)

.83 (21.1) 1.10 (28) .51 (13)

1.06 (27)

1.05 (26.7) 1.22 (31) .55 (14)

1.30 (33)

1.35 (34.3) 1.54 (39) .75 (19)

1.65 (42)

.79 (20)

1.06 (27)

.35 (9)

.94 (24)

.79 (20)

1.10 (28)

.35 (9)

1.06 (27)

.98 (25)

1.22 (31) .43 (11)

1.30 (33)

ROMEX® is a federally registered trademark of Southwire Company. *Note: UL F1 rating applies to Black Nylon Fittings only. * Insert for ASI-BUS Cables For Material Specifications please refer to page 45.

Dimensions and specifications may be changed without prior notice.

Other Products / Index

F1/F

Thread Type & Size

Technical Information

Suggested Clearance Hole for Non-Threaded Mounting

Conduit System

These form seals fit Strain Relief Fittings made of other materials. (Nickel Plated Brass, Stainless Steel, etc.)

Nylon Liquid Tight Strain Relief Fittings ROMEX® - PG/NPT/Metric Threads

They are made of Nylon with Elastomer form seal and are resistant to salt water, weak acids, weak alkalis, alcohol, ether, esters, ketones, mineral, animal and vegetable oils. Non-corrosive and suitable for direct burial installation.

Screw Clamp

Adapter,Reducer,Enlarger

Strain Relief Fittings with Inserts for Flat Cables and ASI-BUS Cables.

F1/F

Accessories

CD13AA-CP

PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

PVDF / Steel

CD09AA-CP CD11AA-CP

Inches (mm) .16 - .31 (4 - 8) .24 - .39 (6 - 10)

Nickel Plated Brass

See page 49 for thread specs

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Clamp High Performance - PG & Metric Threads

Nylon Strain Relief Nickel Plated Brass PVDF / Steel Accessories Adapter,Reducer,Enlarger Conduit System Technical Information Other Products / Index

Nylon Liquid Tight Strain Relief Fittings Multi-Hole - PG Threads

Part Numbers Black

Gray G

Thread Type & Size

Dimensions in Inches (mm) Diameter of Holes

No. of Holes

See page 49 for thread specs

PG 7 / CD07AP-BK CD07AP-GY 1/4” NPT

Part Numbers of Inserts only

Dimensions in Inches (mm) No. of Holes

See page 49 for thread specs

CD21A1-BK CD21A2-BK CD21A3-BK CD21A4-BK CD21A5-BK CD21A6-BK CD21A7-BK CD21A8-BK CD21A9-BK CD21AP-BK

CD21A1-GY CD21A2-GY CD21A3-GY CD21A4-GY CD21A5-GY CD21A6-GY CD21A7-GY CD21A8-GY CD21A9-GY CD21AP-GY

CD29A1-BK CD29A2-BK CD29A3-BK CD29AP-BK

CD29A1-GY CD29A2-GY CD29A3-GY CD29AP-GY

CD36A1-BK CD36A2-BK CD36A3-BK CD36A4-BK CD36AP-BK

CD36A1-GY CD36A2-GY CD36A3-GY CD36A4-GY CD36AP-GY

Diameter of Holes

4 3 2 4 1 4 3 4/1 2

Inches

6.0 .24 7.0 .28 8.0 .31 5.0 .20 8.0 .31 5.2 .20 5.2 .20 5.2/3.7 .20/.15 7.4 .29 Solid Insert

1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19

6 4 4

6.5 .26 9.0 .35 9.5 .37 Solid Insert

1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19

5 7 6 2

9.0 .35 9.0 .35 8.0 .31 15.0 .59 Solid Insert

1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19

4 2 5 2 10 6 3 4 4

1.4 .06 3.0 .12 1.6 .06 1.7 .07 1.4 .06 1.4 .06 1.7 .07 1.7 .07 2.3 .09 Solid Insert

1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19

2 3 2 3 4

3.0 .12 3.0 .12 4.0 .16 1.5 .06 2.8 .11 Solid Insert

1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19

1.089.1300.19 1.089.1301.19 CD42A1-BK CD42A1-GY 3 14.0 .55 1.089.4203.19 1.089.1302.19 CD42AP-BK CD42AP-GY PG 42 Solid Insert 1.089.4299.19 1.089.1303.19 8 10.0 .39 1.089.4800.19 1.089.1304.19 CD48A1-BK CD48A1-GY 6 12.0 .47 1.089.4801.19 1.089.1305.19 CD48A2-BK CD48A2-GY PG 48 3 18.0 .71 1.089.4802.19 1.089.1306.19 CD48A3-BK CD48A3-GY Solid Insert 1.089.4899.19 1.089.1307.19 CD48AP-BK CD48AP-GY 1.089.1308.19 Fittings with Multi-Hole Inserts are also available with Flex Nut. 1.089.1399.19

CD11A1-GY CD11A2-GY CD11A3-GY CD11A4-GY CD11A5-GY CD11AP-GY

CD13A1-BK CD13A2-BK CD13A3-BK CD13A4-BK CD13A5-BK CD13A6-BK CD13A7-BK CD13A8-BK CD13A9-BK CD13AP-BK

CD13A1-GY CD13A2-GY CD13A3-GY CD13A4-GY CD13A5-GY PG 13 / 13.5 CD13A6-GY CD13A7-GY CD13A8-GY CD13A9-GY CD13AP-GY

3 6 3 2 3 2 2 2 2

2.0 .08 3.0 .12 4.0 .16 5.0 .20 3.0 .12 5.2 .20 3.8 .15 4.2 .17 2.5 .10 Solid Insert

CD16A1-BK CD16A2-BK CD16A3-BK CD16A4-BK CD16A5-BK CD16A6-BK CD16A7-BK CD16A8-BK CD16A9-BK CD16A0-BK CD16AP-BK

CD16A1-GY CD16A2-GY CD16A3-GY CD16A4-GY CD16A5-GY CD16A6-GY CD16A7-GY CD16A8-GY CD16A9-GY CD16A0-GY CD16AP-GY

3 3 4 5 6 2 3 6 4 6

3.0 .12 1.089.1600.19 4.0 .16 1.089.1601.19 4.0 .16 1.089.1602.19 4.0 .16 1.089.1603.19 4.0 .16 1.089.1604.19 6.0 .24 1.089.1605.19 5.6 .22 1.089.1606.19 3.0 .12 1.089.1607.19 3.0 .12 1.089.1610.19* 3.8 .15 1.089.1609.19 Solid Insert 1.089.1699.19

PG 21

PG 29

PG 36

To order, substitute “CF” for “CD” (e.g. CD09A1-BK becomes CF09A1-BK) For specifications and dimensions see page 4 where the appropriate Fittings are listed.

Dome Fittings also available with the following approvals:

*Note: UL F1 rating applies to Black Nylon Fittings only. *Note: This Insert has slotted holes. Silicone

Part Numbers of Inserts only

1.089.0799.19

CD11A1-BK CD11A2-BK CD11A3-BK CD11A4-BK CD11A5-BK CD11AP-BK

PG 16

Thread Type & Size

Solid Insert

CD09A1-GY CD09A2-GY CD09A3-GY CD09A4-GY CD09A5-GY CD09A6-GY CD09A7-GY CD09A8-GY CD09A9-GY CD09AP-GY

PG 11

Gray G

Inches

CD09A1-BK CD09A2-BK CD09A3-BK CD09A4-BK CD09A5-BK CD09A6-BK CD09A7-BK CD09A8-BK CD09A9-BK CD09AP-BK

PG 9

Part Numbers Black

Viton®

Multi-Hole Inserts are availa available in Silicone and Viton® upon request.

Viton® is a federally registered trademark of DuPont Dow Elastomer.

10 For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Part Numbers Black

Gray G

Thread Type & Size

Dimensions in Inches (mm) No. of holes

PG 7 / CD07AP-BK CD07AP-GY 1/4” NPT

Part Numbers of Inserts only

Black

Gray G

Thread Type & Size

Dimensions in Inches (mm) No. of Holes

See page 49 for thread specs

Diameter of Holes

Part Numbers of Inserts only

6.5 .26 9.0 .35 9.5 .37 Solid Insert

1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19

6 4 4

6.5 .26 9.0 .35 9.5 .37 Solid Insert

1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19

CD36N1-BK CD36N1-GY 5 9.0 .35 CD36N2-BK CD36N2-GY 7 9.0 .35 1-1/2” CD36N3-BK CD36N3-GY 6 8.0 .31 NPT CD36N4-BK CD36N4-GY 2 15.0 .59 1.089.1600.19 CD36NP-BK CD36NP-GY Solid Insert 1.089.1601.19 1.089.1602.19 For specifications and dimensions see page 4 where the appropriate Fittings are listed. 1.089.1603.19 1.089.1604.19 1.089.1605.19 Silicone Viton® 1.089.1606.19

1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19

CD09N1-GY CD09N2-GY CD09N3-GY CD09N4-GY CD09N5-GY 3/8” NPT CD09N6-GY CD09N7-GY CD09N8-GY CD09N9-GY CD09NP-GY

4 2 5 2 10 6 3 4 4

1.4 .06 3.0 .12 1.6 .06 1.7 .07 1.4 .06 1.4 .06 1.7 .07 1.7 .07 2.3 .09 Solid Insert

1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19

CD13N1-BK CD13N2-BK CD13N3-BK CD13N4-BK CD13N5-BK CD13N6-BK CD13N7-BK CD13N8-BK CD13N9-BK CD13NP-BK

CD13N1-GY CD13N2-GY CD13N3-GY CD13N4-GY CD13N5-GY 1/2” NPT CD13N6-GY CD13N7-GY CD13N8-GY CD13N9-GY CD13NP-GY

3 6 3 2 3 2 2 2 2

2.0 .08 3.0 .12 4.0 .16 5.0 .20 3.0 .12 5.2 .20 3.8 .15 4.2 .17 2.5 .10 Solid Insert

1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19

CD16N1-BK CD16N2-BK CD16N3-BK CD16N4-BK CD16N5-BK CD16N6-BK CD16N7-BK CD16N8-BK CD16N9-BK CD16N0-BK CD16NP-BK

CD16N1-GY CD16N2-GY CD16N3-GY CD16N4-GY CD16N5-GY 1/2” NPT CD16N6-GY (Enlarged) CD16N7-GY CD16N8-GY CD16N9-GY CD16N0-GY CD16NP-GY

3 3 4 5 6 2 3 6 4 6

3.0 .12 4.0 .16 4.0 .16 4.0 .16 4.0 .16 6.0 .24 5.6 .22 3.0 .12 3.0 .12 3.8 .15 Solid Insert

1.089.1607.19 1.089.1610.19* 1.089.1609.19 1.089.1699.19

*Note: UL F1 rating applies to Black Nylon Fittings only. *Note: This Insert has slotted holes.

CD29N1-BK CD29N2-BK CD29N3-BK CD29NP-BK

CD29N1-GY CD29N2-GY 1” NPT CD29N3-GY CD29NP-GY

CD29L1-BK CD29L2-BK CD29L3-BK CD29LP-BK

CD29L1-GY CD29L2-GY CD29L3-GY CD29LP-GY

1-1/4” NPT

Conduit System

CD09N1-BK CD09N2-BK CD09N3-BK CD09N4-BK CD09N5-BK CD09N6-BK CD09N7-BK CD09N8-BK CD09N9-BK CD09NP-BK

4 3 2 4 1 4 3 4/1 2

Multi-Hole Inserts are available in Silicone and Viton® on request.

Fittings with Multi-Hole Inserts are also available with Flex Nut.

Adapter,Reducer,Enlarger

6 4 4

1.089.0799.19

CD21N1-GY CD21N2-GY CD21N3-GY CD21N4-GY CD21N5-GY 3/4” NPT CD21N6-GY CD21N7-GY CD21N8-GY CD21N9-GY CD21NP-GY

Accessories

1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19

Solid Insert

CD21N1-BK CD21N2-BK CD21N3-BK CD21N4-BK CD21N5-BK CD21N6-BK CD21N7-BK CD21N8-BK CD21N9-BK CD21NP-BK

PVDF / Steel

mm Inches 6.0 .24 7.0 .28 8.0 .31 5.0 .20 8.0 .31 5.2 .20 5.2 .20 5.2/3.7 .20/.15 7.4 .29 Solid Insert

Inches

Nickel Plated Brass

See page 49 for thread specs

Diameter of Holes

Part Numbers

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Multi-Hole - NPT Threads

Viton® is a federally registered trademark of DuPont Dow Elastomer.

• To order, substitute “CF” for “CD” (e.g. CD09N1-BK becomes CF09N1-BK) Any special insert hole or profile configuration is available for a 1-time set-up fee & a minimum order of 1,000 pieces. For small quantities we suggest drilling or machining the inserts yourself, following these guidelines:

We suggest drilling the frozen solid insert. Drill holes by using a standard high-speed steel drill bit of the proper size at approx. 2500 RPM. Drill holes with insert installed in Strain Relief Fitting as a fixture. Keep a distance of min. 1 mm (.04 in) between holes. The outside holes can be located right against the lip of the strain relief body, as sufficient insert material remains between the hole and the body wall due to the design of the cord grip.

Other Products / Index

• • • • •

Dome Fittings also available with the following approvals:

Important: Design Parameters: Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed .04” (1 mm). The Multi Cable fittings will meet NEMA 4x = IP65 if the design parameters are complied with. To verify a submersible NEMA 6= IP68 application, the final assembly of cables and fittings must be tested by the customer or submitted at the customer’s expense to an independent test lab. For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Technical Information

Custom Solutions!

Other Products / Index

Technical Information

Conduit System

Adapter,Reducer,Enlarger

Accessories

PVDF / Steel

Nickel Plated Brass

Nylon Strain Relief

Nylon Liquid Tight Strain Relief Fittings Multi-Hole - Metric Threads *

Part Numbers Black

Gray G

Thread Type & Size

Dimensions in Inches (mm) No. of Holes

See page 49 for thread specs

Diameter of Holes

CD16M1-BK CD16M2-BK CD16M3-BK CD16M4-BK CD16M5-BK CD16M6-BK CD16M7-BK CD16M8-BK CD16M9-BK CD16MP-BK

CD16M1-GY CD16M2-GY CD16M3-GY CD16M4-GY CD16M5-GY M16 x 1.5 CD16M6-GY CD16M7-GY CD16M8-GY CD16M9-GY CD16MP-GY

4 2 5 2 10 6 3 4 4

CD17M1-BK CD17M2-BK CD17M3-BK CD17M4-BK CD17M5-BK CD17MP-BK

CD17M1-GY CD17M2-GY CD17M3-GY M16 x 1.5 CD17M4-GY (Enlarged) CD17M5-GY CD17MP-GY

CD20M1-BK CD20M2-BK CD20M3-BK CD20M4-BK CD20M5-BK CD20M6-BK CD20M7-BK CD20M8-BK CD20M9-BK CD20MP-BK CD22M1-BK CD22M2-BK CD22M3-BK CD22M4-BK CD22M5-BK CD22M6-BK CD22M7-BK CD22M8-BK CD22M9-BK CD22M0-BK CD22MP-BK

Black

Part Numbers of Inserts only

mm Inches Solid Insert 1.089.0799.19

CD12MP-BK CD12MP-GY M12 x 1.5

Part Numbers Gray Gr

Thread Type & Size

Dimensions in Inches (mm) No. of Holes

Diameter of Holes

See page 49 for thread specs

Part Numbers of Inserts only

CD25M1-BK CD25M2-BK CD25M3-BK CD25M4-BK CD25M5-BK CD25M6-BK CD25M7-BK CD25M8-BK CD25M9-BK CD25MP-BK

mm Inches CD25M1-GY 4 6.0 .24 CD25M2-GY 3 7.0 .28 CD25M3-GY 2 8.0 .31 CD25M4-GY 4 5.0 .20 CD25M5-GY 1 8.0 .31 M25 x 1.5 CD25M6-GY 4 5.2 .20 CD25M7-GY 3 5.2 .20 CD25M8-GY 4/1 5.2/3.7 .20/.15 CD25M9-GY 2 7.4 .29 CD25MP-GY Solid Insert

1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19

CD32M1-BK CD32M2-BK CD32M3-BK CD32MP-BK

CD32M1-GY CD32M2-GY M32 x 1.5 CD32M3-GY CD32MP-GY

6 4 4

6.5 .26 9.0 .35 9.5 .37 Solid Insert

1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19

CD40M1-BK CD40M2-BK CD40M3-BK CD40M4-BK CD40MP-BK

CD40M1-GY CD40M2-GY CD40M3-GY M40 x 1.5 CD40M4-GY CD40MP-GY

5 7 6 2

9.0 .35 9.0 .35 8.0 .31 15.0 .59 Solid Insert

1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19

1.4 .06 3.0 .12 1.6 .06 1.7 .07 1.4 .06 1.4 .06 1.7 .07 1.7 .07 2.3 .09 Solid Insert

1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19

2 3 2 3 4

3.0 .12 3.0 .12 4.0 .16 1.5 .06 2.8 .11 Solid Insert

1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19

CD20M1-GY CD20M2-GY CD20M3-GY CD20M4-GY CD20M5-GY M20 x 1.5 CD20M6-GY CD20M7-GY CD20M8-GY CD20M9-GY CD20MP-GY

3 6 3 2 3 2 2 2 2

2.0 .08 3.0 .12 4.0 .16 5.0 .20 3.0 .12 5.2 .20 3.8 .15 4.2 .17 2.5 .10 Solid Insert

1.089.1300.19 1.089.1301.19 1.089.1302.19 CD50M1-BK CD50M1-GY 3 14.0 .55 1.089.4203.19 M50 x 1.5 1.089.1303.19 CD50MP-BK CD50MP-GY Solid Insert 1.089.4299.19 1.089.1304.19 8 10.0 .39 1.089.4800.19 1.089.1305.19 CD63M1-BK CD63M1-GY 12.0 .47 1.089.4801.19 1.089.1306.19 CD63M2-BK CD63M2-GY M63 x 1.5 6 3 18.0 .71 1.089.4802.19 1.089.1307.19 CD63M3-BK CD63M3-GY Solid Insert 1.089.4899.19 1.089.1308.19 CD63MP-BK CD63MP-GY 1.089.1399.19 Fittings with Multi-Hole Inserts are also available with Flex Nut.

CD22M1-GY CD22M2-GY CD22M3-GY CD22M4-GY CD22M5-GY M20 x 1.5 CD22M6-GY (Enlarged) CD22M7-GY CD22M8-GY CD22M9-GY CD22M0-GY CD22MP-GY

3 3 4 5 6 2 3 6 4 6

3.0 .12 4.0 .16 4.0 .16 4.0 .16 4.0 .16 6.0 .24 5.6 .22 3.0 .12 3.0 .12 3.8 .15 Solid Insert

1.089.1600.19 To order, substitute “CF” for “CD” 1.089.1601.19 (e.g. CD16M1-BK becomes CF16M1-BK) 1.089.1602.19 Dome Fittings also available 1.089.1603.19 with the following approvals: 1.089.1604.19 Optional Locking Nuts, O-Rings 1.089.1605.19 & Other Accessories starting on 1.089.1606.19 page 28 & 29. 1.089.1607.19 Strain Relief 1.089.1610.19* 1.089.1609.19 1.089.1699.19

*Note: This Insert has slotted holes. *Note: UL F1 rating applies to Black Nylon Fittings only.

Insert

How to feed a cable assembly with plug through a strain relief fitting: g g: 1. 2. 3. 4.

Determine largest dimension of the plug. Choose Strain Relief with appropriate Dome opening (see table on page 48). Drill solid insert to exact cable diameter & slice insert on one side only. Assemble by feeding Connector first through dome nut and Strain Relief body, snap insert over cable and insert into body, tighten dome nut. Done. Dome 5. This applies to PG, NPT or Metric solutions. For specifications and dimensions see page 5 where the appropriate Fittings are listed.

Plug

Opening

Dome Nut

12 For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Nylon Strain Relief Nylon Strain Relief

Nickel Nylon PlatedLiquid Brass Tight LiquidStrain TightRelief StrainFittings Relief Fittings Features & Benefits Features & Benefits: Liquid Tight - Submersible to 300 ft. - NEMA 4x & 6 (IP 68 / IP 69K) Highest Pressure Rating - Patented form seal meets 150 PSIG (10 BAR) Flame protected - V0 Rated According to UL 94 Halogen- and Phosphorous-Free Materials Safety - Ratchet to prevent Dome from coming loose under vibration Large Selection - Cable Range from .08” (2 mm) to 3.54” (90 mm) Non-Corrosive - Resistant to salt water, weak acids, weak alkalis, alcohol, esters, ketones, ether, gasoline, mineral, animal & vegetable oil. • Durable - Rugged Construction • Environmentally Compliant - RoHS & Deca BDE

UL/UR CSA VDE CAGE PATENT

E103997 074032 71339 0 UE114 4145075

Nickel Plated Brass Nickel Plated Brass

• • • • • • •

e Uniqu

ct P ro d u

PVDF / Steel PVDF / Steel

Accessories Accessories

Su Submersible The patented internal sealing edge results in a Th superior seal between the splined Nylon clamping su insert and Nickel Plated Brass body. in

Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

Unique U Product The T patented recess and high performance seal guarantees g NEMA 4x & 6 (IP 68 / IP 69K) at 150 PSIG (10 bar). P

Conduit System Conduit System

Liquid Tight Molded O-Ring Groove: All of our Nickel Plated Brass parts come with an O-Ring, which makes your application liquid tight, allowing submersion up to 300 ft.

Other Products / Index Technical Information Other Products / Index Technical Information

E Easy Installation The anti-rotation grooves prevent cable rotation while T tightening the nut. ti

Time Saving Installation Simply push the cable through Strain Relief Fitting - Tighten Dome or Flex Nut - Done! No disassembly of the Fitting required: Insert Cable - Tighten Nut - Finished! Standard, Reduced and Multi-Hole Inserts Modularity: Increase and decrease cable opening by swapping out inserts to accommodate various cable sizes & configurations.

Flex Nut The Stainless Steel spring extension offers superior protection against kinking and chafing of the cable. For Material Specifications please refer to page 45. Note: Nickel Plated Brass Fittings come with an O-Ring.

Dimensions and specifications may be changed without prior notice.

13 13

Nylon Strain Relief Nickel Plated Brass PVDF / Steel Accessories Adapter,Reducer,Enlarger Conduit System Technical Information Other Products / Index

* *

Nickel NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Standard - PG/NPT/Metric Threads

Part Numbers Dome Fittings

Cable Range

Flex Fittings

Thread Type & Size See page 49 for thread specs

CD07AA-BR CD07AR-BR CD09AA-BR CD09AR-BR CD11AA-BR CD11AR-BR CD13AA-BR CD13AR-BR CD16AA-BR CD16AR-BR CD21AA-BR CD21AR-BR CD29AA-BR CD29AR-BR CD36AA-BR CD36AR-BR CD42AA-BR CD42AR-BR CD48AA-BR CD48AR-BR

CF07AA-BR CF CF07AR-BR CF09AA-BR CF09AR-BR CF11AA-BR CF11AR-BR CF13AA-BR CF13AR-BR CF16AA-BR CF16AR-BR CF21AA-BR CF21AR-BR -

CD09NA-BR CD09NR-BR CD13NA-BR CD13NR-BR CD16NA-BR CD16NR-BR CD21NA-BR CD21NR-BR CD29NA-BR CD29NR-BR

CF09NA-BR CF09NR-BR CF13NA-BR CF13NR-BR CF16NA-BR CF16NR-BR CF21NA-BR CF21NR-BR -

.16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7 - 12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20)

CD12MA-BR CD12MR-BR CD16MA-BR CD16MR-BR CD17MA-BR CD17MR-BR CD20MA-BR CD20MR-BR CD22MA-BR CD22MR-BR CD25MA-BR CD25MR-BR CD32MA-BR CD32MR-BR CD40MA-BR CD40MR-BR CD50MA-BR CD50MR-BR CD63MA-BR CD63MR-BR

CF12MA-BR CF12MR-BR CF16MA-BR CF16MR-BR CF17MA-BR CF17MR-BR CF20MA-BR CF20MR-BR CF22MA-BR CF22MR-BR CF25MA-BR CF25MR-BR -

*Note: CSA Approval only applies to Dome Fittings. VDE Approval only applies to Fittings with Metric Thread.

For Material Specifications please refer to page 45.

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

.49 (12.5)

.75 (19)

2.17 (55)

.20 (5)

.55 (14)

.60 (15.2)

.83 (21)

2.60 (66)

.24 (6)

.67 (17)

.73 (18.5)

.87 (22)

3.03 (77)

.24 (6)

.79 (20)

.80 (20.3)

.94 (24)

3.46 (88)

.26 (6.5)

.87 (22)

.89 (22.5)

.94 (24)

3.89 (99)

.26 (6.5)

.94 (24)

1.12 (28.4) 1.02 (26) 4.37 (111)

.28 (7)

1.18 (30)

1.47 (37.3) 1.14 (29)

.31 (8)

1.57 (40)

1.38 (35)

.31 (8)

1.97 (50)

2.13 (54.1) 1.46 (37)

.35 (9)

2.24 (57)

2.34 (59.4) 1.50 (38)

.39 (10)

2.52 (64)

+ .01” (+.25 mm)

1.85(47)

3/8” NPT

.68 (17.2)

.83 (21)

2.60 (66)

.59 (15)

.67 (17) / .75 (19)

1/2” NPT

.83 (21.1)

.94 (24)

3.46 (88)

.51 (13)

.87 (22) / .94 (24)

1/2” NPT

.83 (21.1)

.94 (24)

3.89 (99)

.51 (13)

.94 (24)

3/4” NPT

1.05 (26.7) 1.02 (26) 4.37 (111)

.51 (13)

1.18 (30)

1.35 (34.3) 1.14 (29)

.75 (19)

1.57 (40)

1” NPT

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

M12 x 1.5

.47 (12)

.75 (19)

2.17 (55)

.26 (6.5)

.55 (14)

M16 x 1.5

.63 (16)

.83 (21)

2.60 (66)

.24 (6)

.67 (17) / .75 (19)

M16 x 1.5

.63 (16)

.87 (22)

3.03 (77)

.24 (6)

.79 (20)

M20 x 1.5

.79 (20)

.91 (23)

3.46 (88)

.24 (6)

.87 (22)

M20 x 1.5

.79 (20)

.94 (24)

3.86 (98)

.24 (6)

.94 (24)

M25 x 1.5

.98 (25)

1.02 (26) 4.37 (111)

.28 (7)

1.18 (30)

M32 x 1.5

1.26 (32)

1.22 (31)

.31 (8)

1.57 (40)

M40 x 1.5

1.57 (40)

1.46 (37)

.31 (8)

1.97 (50)

M50 x 1.5

1.97 (50)

1.46 (37)

.35 (9)

2.24 (57)

M63 x 1.5

2.48 (63)

1.50 (38)

.39 (10) 2.52 (64) 64) / 2.68 (68)

F1/F

Suggested Clearance Hole for Non-Threaded Mounting

Dimensions and specifications may be changed without prior notice.

Dome Fittings also available with the following approvals:

F1/F

Mini WADI Fittings solve space restriction issues. These mini components will fit into tight areas, but maintain the quality of their larger counterparts. A Buna-N or Viton® O-Ring creates a reliable seal between body and housing. Typical Mini Applications: WADI Rating: 70 PSI, 5 BAR, IP68 Mini WADI

Suggested Clearance Hole for Non-Threaded Mounting

Fiber optics Sensors Cameras Switches Small appliances

TPE

Thread Type & Size

Viton®*

Inches (mm)

See page 49 for thread specs

.08 - .18 (2 - 4.5)

PG 7

F1/F

Clearance Hole

Body Length

Thread Length

Wrench Flats

.49 (12.5) .56 (14.3) .14 (3.5)

.59 (15) / .43 (11) .31 (8) .43 (11) .47 (12)

.25 (6) .33 (8) .39 (10)

.39 (10) .51 (13) .55 (14)

.24 (6) .24 (6) .24 (6)

Dimensions in Inches (mm)

Thread Type & Size See page 49 for thread specs

+ .01” (+.25 mm)

CD06MW-BR CD06MW-RV .08 - .13 (2 - 3.2) M6 x 1 CD08MW-BR CD08MW-RV .12 - .20 (3 - 5) M8 x 1.25 CD10MW-BR .16 - .24 (4 - 6) M10 x 1.5 *Note: Does not come with an O-Ring

Part Numbers

Dimensions in Inches (mm)

NP-07-BR

PG 7

NM-06-BR M6 x 1.0 NM-08-BR M8 x 1.25 NM-10-BR M10 x 1.5

Thickness

Wrench Flats

.11 (2.8)

.59 (15)

.10 (2.5) .10 (2.5) .11 (2.8)

.39 (10) .51 (13) .51 (13)

PVDF / Steel

CD07AW-BR*

Cable Range

Locknuts for Mini WADI

Mini WADI Part Numbers

F1/F

Typical XL Applications: Machine & Apparatus Automation Railroads Ship Building Off-shore Renewable Energy Utilities Nuclear Power

D Wrench Flat (H)

F1/F G

Silicone or Viton®* Inserts & O-Rings for WADI XL Fittings are available on request Sil request. For Fo inquiries - please call our Inside Technical Sales Department (800-456-9012 or 303-699-1135).

WADI XL Cable Range

Buna-N

1.89 - 2.17 (48 - 55) 2.09 - 2.36 (53 - 60) 2.28 - 2.56 (58 - 65) 2.48 - 2.76 (63 - 70) 2.68 - 2.95 (68 - 75) 2.87 - 3.15 (73 - 80) 3.07 - 3.35 (78 - 85) 3.27 - 3.54 (83 - 90)

F1/F

Clearance Hole

Body Length

Thread Length

Wrench Flats

See page 49 for thread specs

+ .01” (+.25 mm)

M63 x 1.5

2.48 (63)

1.65 (42)

.39 (10)

M75 x 1.5

2.95 (75)

1.65 (42)

.59 (15)

M80 x 2

3.15 (80)

1.65 (42)

.59 (15)

2.95 (75) 3.15 (80) 3.35 (85) 3.54 (90)

M90 x 2

3.54 (90)

1.65 (42)

.59 (15)

3.94 (100)

M100 x 2

3.94 (100)

2.05 (52)

.79 (20)

4.33 (110)

M110 x 2

4.33 (110)

2.05 (52)

.79 (20)

4.72 (120)

G 2-1/2”

2.96 (75.8) 1.65 (42)

.71 (18)

3.54 (90)

G 3”

3.46 (87.9) 1.65 (42)

.71 (18)

2.05 (52)

.87 (22)

G4”

4.45 (113) 2.05 (52)

.87 (22)

Dimensions in Inches (mm) G

Thickness

Wrench Flats

See page 49 for thread specs

3.94 (100) 4.13 (105) 4.92 (125) 4.92 (125) 4.92 (125) 5.12 (130)

*Viton® is a federally registered trademark of DuPont Dow Elastomer. Dimensions and specifications may be changed without prior notice.

NM-63-XL NM-75-XL NM-80-XL NM-90-XL NM-10-XL NM-11-XL

M63 x 1.5 M75 x 1.5 M80 x 2 M90 x 2 M100 x 2 M110 x 2

.24 (6) .32 (8) .32 (8) .32 (8) .43 (11) .43 (11)

2.76 (70) 3.35 (85) 3.54 (90) 3.94 (100) 4.53 (115) 4.92 (125)

NG-52-XL NG-30-XL NG-40-XL

G 2-1/2” G 3” G 4”

.28 (7) .32 (8) .43 (11)

3.15 (80) 3.74 (95) 4.92 (125)

Other Products / Index

CX52GA-BR CX52GB-BR CX30GA-BR CX30GB-BR CX40GA-BR CX40GB-BR CX40GC-BR CX40GD-BR

Part Numbers Thread Type & Size

Technical Information

Inches (mm) 1.89 - 2.17 (48 - 55) 1.89 - 2.17 (48 - 55) 2.09 - 2.36 (53 - 60) 2.28 - 2.56 (58 - 65) 2.48 - 2.76 (63 - 70) 2.68 - 2.95 (68 - 75) 2.87 - 3.15 (73 - 80) 3.07 - 3.35 (78 - 85) 3.27 - 3.54 (83 - 90)

Dimensions in Inches (mm)

Conduit System

CX63MA-BR CX75MA-BR CX75MB-BR CX80MA-BR CX90MA-BR CX90MB-BR CX10MA-BR CX10MB-BR CX11MA-BR

Thread Type & Size

Locknuts for WADI XL

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

For Material Specifications please refer to page 45.

Adapter,Reducer,Enlarger

• • • • • • • •

Accessories

WADI XL

Part Numbers

Nickel Plat Plated Brass

• • • • •

Nylon Strain train Relieff

NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Nickel Mini WADI & WADI XL - PG & Metric Threads

Nylon Strain Relief

Nickel NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Elongated - PG & Metric Threads

Part Numbers Dome Fittings me Fitt

Cable Range

Thread Type & Size

Flex Fittings

Nickel Plated Brass

See page 49 for thread specs

Accessories

PVDF / Steel

CD07CA-BR 7CA CD07CR-BR CD09CA-BR CD09CR-BR CD11CA-BR CD11CR-BR CD13CA-BR CD13CR-BR CD16CA-BR CD16CR-BR CD21CA-BR CD21CR-BR CD29CA-BR CD29CR-BR CD36CA-BR CD36CR-BR CD42CA-BR CD42CR-BR CD48CA-BR CD48CR-BR

CF07CA-BR CF07CR-BR CF09CA-BR CF09CR-BR CF11CA-BR CF11CR-BR CF13CA-BR CF13CR-BR CF16CA-BR CF16CR-BR CF21CA-BR CF21CR-BR -

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

.49 (12.5)

.75 (19)

2.17 (55)

.39 (10)

.55 (14)

.60 (15.2)

.83 (21)

2.60 (66)

.39 (10)

.67 (17)

.73 (18.5)

.87 (22)

3.03 (77)

.39 (10)

.79 (20)

.80 (20.3)

.94 (24)

3.46 (88)

.39 (10)

.87 (22)

.89 (22.5)

.91 (23)

3.86 (98)

.39 (10)

.94 (24)

1.12 (28.4)

.94 (24)

4.37 (111)

.47 (12)

1.18 (30)

1.47 (37.3)

1.14 (29)

.47 (12)

1.57 (40)

1.85 (47)

1.38 (35)

.59 (15)

1.97 (50)

2.13 (54.1)

1.46 (37)

.59 (15)

2.24 (57)

2.34 (59.4)

1.50 (38)

.59 (15)

2.52 (64)

+ .01â&#x20AC;? (+.25 mm)

Adapter,Reducer,Enlarger

Elongated is recommend where the Strain Relief has to pass through a thick wall or the application just needs the extra thread length. Dome Fittings also available with the following approvals:

Conduit System

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Other Products / Index

Technical Information

CD12DA-BR CD12DR-BR CD16DA-BR CD16DR-BR CD17DA-BR CD17DR-BR CD20DA-BR CD20DR-BR CD22DA-BR CD22DR-BR CD25DA-BR CD25DR-BR CD32DA-BR CD32DR-BR CD40DA-BR CD40DR-BR CD50DA-BR CD50DR-BR CD63DA-BR CD63DR-BR

CF12DA-BR CF12DR-BR CF16DA-BR CF16DR-BR CF17DA-BR CF17DR-BR CF20DA-BR CF20DR-BR CF22DA-BR CF22DR-BR CF25DA-BR CF25DR-BR -

F1/F Wall

Suggested Clearance Hole for Non-Threaded Mounting

F1/F

Wall

D C

M12 x 1.5

.47 (12)

.75 (19)

2.17 (55)

.39 (10)

.55 (14)

M16 x 1.5

.63 (16)

.83 (21)

2.60 (66)

.39 (10)

.67 (17) / .75 (19)

M16 x 1.5

.63 (16)

.87 (22)

3.03 (77)

.39 (10)

.79 (20)

M20 x 1.5

.79 (20)

.91 (23)

3.46 (88)

.39 (10)

.87 (22)

M20 x 1.5

.79 (20)

.94 (24)

3.86 (98)

.39 (10)

.94 (24)

M25 x 1.5

.98 (25)

1.02 (26)

4.37 (111)

.47 (12)

1.18 (30)

M32 x 1.5

1.26 (32)

1.22 (31)

.47 (12)

1.57 (40)

M40 x 1.5

1.57 (40)

1.46 (37)

.59 (15)

1.97 (50)

M50 x 1.5

1.97 (50)

1.46 (37)

.59 (15)

2.24 (57)

M63 x 1.5

2.48 (63)

1.50 (38)

.59 (15)

2.52 (64) / 2.68 (68)

*Note: VDE Approval only applies to Fittings with Metric Thread.

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Part Numbers w/ Connection Threads

w/ Mounting Flange

See page 49 for thread specs

min. 0.04” x 45º (1 x 45º) M20 x 1.5 / PG 13.5

Suggested Clearance Hole for Non-Threaded Mounting

ED20MA-BR ED20MR-BR ED13AA-BR ED13AR-BR -

ED20FA-BR ED20FR-BR

Dimensions in Inches (mm) A

Clearance Body Hole Height

Body Length

Thread Length

Wrench Flats

+ .01” (+.25

mm) Inches (mm) .39 - .55 (10 - 14) M20 x 1.5 .79 (20) 1.50 (38) 2.60 (66) .30 (7.5) .98 (25) .28 - .47 (7 - 12) .39 - .55 (10 - 14) PG 13 / .80 (20.3) 1.50 (38) 2.60 (66) .30 (7.5) .98 (25) 13.5 .28 - .47 (7 - 12) .39 - .55 (10 - 14) Flange .79 (20) 1.34 (34) 2.60 (66) .98 (25) .28 - .47 (7 - 12)

.13” (3.2) .98” (25) .78” (19.8)

Robust - Compact - Low profile! Secure your connection with these flange or threaded 90° Elbow Fittings. Saves Space and Time! Quick & Easy Installation: Insert cable into open 90° Elbow Fitting, tighten dome nut for a liquid tight connection. Done!

.78” (19.8)

PVDF / Steel

.78” (19.8)

Thread Type & Size

A i Accessories Accessorie

Nickel Plated Brass Liquid Tight Strain Relief Fittings Clamp High Performance - PG/NPT/Metric Threads * Part Numbers

Cable Range

Clamp Fittings Clamp Fittings w/ Standard dard Thread Elongated gated Thread

CA-M CD07CA-MZ CD09CA-MZ CD11CA-MZ

CD09NA-MZ CD13NA-MZ CD21NA-MZ CD29NA-MZ

F1/F Wrench Flats

.20 (5) .24 (6) .24 (6)

.39 (10) .39 (10) .39 (10)

.55 (14) .67 (17) .79 (20)

.80 (20.3) 1.30 (33) .25 (6.5) .39 (10)

.87 (22)

.89 (22.5) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 2.13 (54.1) 2.34 (59.4)

.39 (10) .47 (12) .47 (12) .59 (15) .59 (15) .59 (15)

.94 (24) 1.18 (30) 1.57 (40) 1.97 (50) 2.24 (57) 2.52 (64)

.67 (17) / .75 (19) .87 (22) / .94 (24) 1.18 (30) 1.57 (40)

.39 (10) .39 (10) .39 (10) .39 (10) .39 (10) .47 (12) .47 (12) .59 (15)

.55 (14) .75 (19) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.57 (40) 1.97 (50)

.59 (15)

2.24 (57)

M63 x 1.5 2.48 (63) 2.05 (52) .39 (10) .59 (15)

2.52 (64) / 2.68 (68)

See page 49 for thread specs

Clearance Body Hole Length

Thread Thread Length Length Standard Elongated

PG 7 PG 9 PG 11 13 / .24 - .47 (6 - 12) PG 13.5 .39 - .55 (10 - 14) PG 16 .51 - .71 (13 - 18) PG 21 .79 - .98 (20 - 25) PG 29 .94 - 1.26 (24 - 32) PG 36 1.26 - 1.50 (32 - 38) PG 42 1.46 - 1.73 (37 - 44) PG 48

+ .01” (+.25 mm)

.49 (12.5) 1.02 (26) .60 (15.2) 1.10 (28) .73 (18.5) 1.18 (30)

.16 - .31 (4 - 8) 3/8” NPT .68 (17.2) .28 - .47 (7 - 12) 1/2” NPT .83 (21.1) .51 - .71 (13 - 18) 3/4” NPT 1.05 (26.7) .71 - .98 (18 - 25) 1” NPT 1.35 (34.3)

CD12DA-MZ .12 - .26 (3 - 6.5) CD16DA-MZ .16 - .31 (4 - 8) CD17DA-MZ .24 - .39 (6 - 10) CD20DA-MZ .24 - .47 (6 - 12) CD22DA-MZ .39 - .55 (10 - 14) CD25DA-MZ .51 - .71 (13 - 18) CD32DA-MZ .71 - .98 (18 - 25) CD40DA-MZ .87 - 1.26 (22 - 32) CD50DA-MZ 1.26 - 1.50 (32 - 38) CD50DR-MZ .98 - 1.22 (25 - 31) CD63DA-MZ 1.46 - 1.73 (37 - 44) CD63DR-MZ 1.14 - 1.38 (29 - 35)

M12 x 1.5 .47 (12) M16 x 1.5 .63 (16) M16 x 1.5 .63 (16) M20 x 1.5 .79 (20) M20 x 1.5 .79 (20) M25 x 1.5 .98 (25) M32 x 1.5 1.26 (32) M40 x 1.5 1.57 (40)

1.30 (33) .25 (6.5) 1.46 (37) .28 (7) 1.69 (43) .31 (8) 1.97 (50) .31 (8) 2.01 (51) .35 (9) 2.05 (52) .39 (10) 1.10 (28) 1.30 (33) 1.46 (37) 1.69 (43)

.59 (15) .51 (13) .51 (13) .75 (19)

1.02 (26) .26 (6.5) 1.10 (28) .24 (6) 1.18 (30) .24 (6) 1.30 (33) .24 (6) 1.30 (33) .24 (6) 1.46 (37) .28 (7) 1.69 (43) .31 (8) 1.97 (50) .31 (8)

M50 x 1.5 1.97 (50) 2.01 (51)

.35 (9)

*Note: VDE Approval only applies to Fittings with Metric Thread.

High Performance Liquid Tight Strain Relief Fitting The Clamping gN Nut provides extra xtra Pull-out Resistance.

Screw Clamp

F1/F

Suggested Clearance Hole for Non-Threaded Mounting Dome Fittings also available with the following approvals:

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Other Products / Index

CD12MA-MZ CD16MA-MZ CD17MA-MZ CD20MA-MZ CD22MA-MZ CD25MA-MZ CD32MA-MZ CD40MA-MZ CD50MA-MZ CD50MR-MZ CD63MA-MZ CD63MR-MZ

Technical Information

CD13CA-MZ CD16CA-MZ CD21CA-MZ CD29CA-MZ CD36CA-MZ CD42CA-MZ CD48CA-MZ

Dimensions in Inches (mm)

Conduit System

CD13AA-MZ CD16AA-MZ CD21AA-MZ CD29AA-MZ CD36AA-MZ CD42AA-MZ CD48AA-MZ

Inches (mm) .12 - .26 (3 - 6.5) .16 - .31 (4 - 8) .24 - .39 (6 - 10)

Thread Type & Size

Adapter,Reducer,Enlarger cer,En

7AA CD07AA-MZ CD09AA-MZ CD11AA-MZ

Nickel Plated Brass

Cable Range

Nylon Strain Relief

NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Nickel 90º Angled Elbow - PG & Metric Threads / Flange

Nylon Strain Relief

Nickel NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings EMI/RFI Proof - Product Features

Nickel Plated Brass

EMI (Electromagnetic Interference) / RFI (Radio Frequency Interference) is an unwanted disturbance that affects an electrical circuit due to either electromagnetic conduction or electromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, or otherwise limit the effective performance of the circuit. These Liquid Tight EMI / RFI - Proof Grounded Strain Relief Fittings made of Nickel Plated Brass are the perfect answer to stringent requirements for reliable grounding and protection from electromagnetic interference.

PVDF / Steel

Two styles are available: Standard and Feed-Through.

Standard (-BE)

The Standard version has an integral O-ring, which presses the braid braiding against the inside wall of the body but can only be used wit w with braided shield.

Accessories

Overlapping clamping splines apply a concentric force, thereby preventing the form seal from being pulled out of the fitting. This ensures pull-out protection without damage to the cable.

Ad R Adapter,Reducer,Enlarger Adapter,Redu Adapter,Red

T patented internal sealing edge results in a superior The sseal between the splined Nylon clamping insert and Nickel Plated Brass body. N

Conduit System em m

Patented 360ยบ grounding due to the internal O-Ring, P which ensures perfect contact between braided shield of cable and fitting.

Feed-Through works well with braided or foil shield and provides reliable grounding by means of metal spring fingers.

Technical hnical Information

Feed-Through (-FE)

Overlapping clamping splines apply a concentric force, thereby preventing the form seal from being pulled out of the fitting. This ensures pull-out protection without damage to the cable.

Other Products / Index

Metal-coated spline insert provides electrical conductivity. e

Flexible contact points allow contact with vvariable braid and foil diameters and add additional strain relief to a solution. 18

For Material Specifications please refer too page 45. Dimensions and specifications may be changed without prior notice.

Halogen and Phosphorous-Free Fire Protection Class V0 According to UL 94 Liquid Tight per NEMA 4x & 6 to 150 PSIG (IP 68 to 10 bar) Quick Assembly and Reliable Grounding of Braid or Foil Shielded Cables

Nickel Plated Brass

• • • •

Nylon Strain Relief

NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Nickel EMI/RFI Proof - Applications & Assembly

EMI/RFI Proof Strain Relief Fittings in all popular thread types and sizes are used in the following areas: • Measuring, control and feedback systems • Telecommunication • Traffic, etc. • Control panels Also used in all areas where in addition to a reliable liquid tight seal, high pull-out resistance and anti-rotation provisions, a dependable contact with the cable shield is required.

PVDF / Steel Accessories

To ensure a goo good ground connection between the Cord Grip and a Metal Enclosure, we stronglyy recommend reco the use of EMI/RFI Locking Nuts (Page 29) for non-threaded mounting.

Adapter,Reducer,Enlarger

These Locking Nuts have cutting edges which will slice through paint coatings on a metal enclosure to ensure grounding. (see page 29)

Assembly Instructions Standard (-BE)

Feed-Through (-FE)

Step 1

Option 1 - Partial Jacket Stripping: • Expose shield approximately 7/16” (10 mm) • Insert cable into fitting until the braid or foil reaches the contact position • Tighten the dome nut • Finished

Conduit System

• Strip cable • Expose braided shield

Option 2 - Total Jacket Removed:

Step 2

Step 3

• Remove cable jacket to expose the braid or foil Insert cable into fitting until the braid reaches the contact point • Tighten the dome nut • Finished

Technical Information

• Feed cable through dome nut & clamping insert • Fold braided shield back over O-Ring on clamping insert • Make sure that braided shield overlaps the O-ring by 3/32” (2 mm) only

Option 3 - Fold Shield over Jacket: • Strip cable jacket & braiding to different lengths • For smaller cable diameters fold the braided shield back over the cable jacket • Insert cable into fitting until the braid reaches the contact point • Tighten the dome nut • Finished

Other Products / Index

• Push clamping insert into body • Tighten dome nut • Finished

Questions or concerns? - Please call our well-trained Inside Technical Sales Department (800-456-9012 or 303-699-1135). For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Nylon Strain Relief Nickel Plated Brass PVDF / Steel Accessories Adapter,Reducer,Enlarger Conduit System

EMI/RFI Proof - Grounded: Standard Version (-BE) Part Numbers Dome Fittings Standard

Flex Fittings Standard

Dome Fittings Elongated

Cable Range

Thread Type & Size

Flex Fittings Elongated

See page 49 for thread specs

CD07AA-BE CD07AR-BE CD09AA-BE CD09AR-BE CD11AA-BE CD11AR-BE CD13AA-BE CD13AR-BE CD16AA-BE CD16AR-BE CD21AA-BE CD21AR-BE CD29AA-BE CD29AR-BE CD36AA-BE CD36AR-BE CD42AA-BE CD42AR-BE CD48AA-BE CD48AR-BE

CF CF07AA-BE CF07AR-BE CF09AA-BE CF09AR-BE CF11AA-BE CF11AR-BE CF13AA-BE CF13AR-BE CF16AA-BE CF16AR-BE CF21AA-BE CF21AR-BE -

CD07CA-BE CD07CR-BE CD09CA-BE CD09CR-BE CD11CA-BE CD11CR-BE CD13CA-BE CD13CR-BE CD16CA-BE CD16CR-BE CD21CA-BE CD21CR-BE CD29CA-BE CD29CR-BE CD36CA-BE CD36CR-BE CD42CA-BE CD42CR-BE CD48CA-BE CD48CR-BE

CF07CA-BE CF07CR-BE CF09CA-BE CF09CR-BE CF11CA-BE CF11CR-BE CF13CA-BE CF13CR-BE CF16CA-BE CF16CR-BE CF21CA-BE CF21CR-BE -

CD09NA-BE CD09NR-BE CD13NA-BE CD13NR-BE CD21NA-BE CD21NR-BE

CF09NA-BE CF09NR-BE CF13NA-BE CF13NR-BE CF21NA-BE CF21NR-BE

CD12MA-BE CD12MR-BE CD16MA-BE CD16MR-BE CD20MA-BE CD20MR-BE CD25MA-BE CD25MR-BE CD32MA-BE CD32MR-BE CD40MA-BE CD40MR-BE CD50MA-BE CD50MR-BE CD63MA-BE CD63MR-BE

CF12MA-BE CF12MR-BE CF16MA-BE CF16MR-BE CF20MA-BE CF20MR-BE CF25MA-BE CF25MR-BE -

CD12DA-BE CD12DR-BE CD16DA-BE CD16DR-BE CD20DA-BE CD20DR-BE CD25DA-BE CD25DR-BE CD32DA-BE CD32DR-BE CD40DA-BE CD40DR-BE -

CF12DA-BE CF12DR-BE CF16DA-BE CF16DR-BE CF20DA-BE CF20DR-BE CF25DA-BE CF25DR-BE -

Dimensions in Inches (mm) A

Clearance Body Hole Length (Dome) + .01”

(+.25 mm) Inches (mm) .12 - .26 (3 - 6.5) PG 7 / .49 (12.5) .75 (19) .08 - .20 (2 - 5) 1/4” NPT .16 - .31 (4 - 8) PG 9 .60 (15.2) .83 (21) .08 - .24 (2 - 6) .20 - .39 (5 - 10) PG 11 .73 (18.5) .87 (22) .12 - .28 (3 - 7) .24 - .47 (6 - 12) PG 13 / .80 (20.3) .94 (24) 13.5 .20 - .35 (5 - 9) .39 - .55 (10 - 14) PG 16 .89 (22.5) .91 (23) .28 - .47 (7 - 12) .51 - .71 (13 - 18) PG 21 1.12 (28.4) .94 (24) .35 - .63 (9 - 16) .71 - .98 (18 - 25) PG 29 1.47 (37.3) 1.14 (29) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) PG 36 1.85 (47) 1.38 (35) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) PG 42 2.13 (54.1) 1.46 (37) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) PG 48 2.34 (59.4) 1.50 (38) 1.14 - 1.38 (29 - 35)

Body Length (Flex)

Thread Thread Length Length Standard Elongated Thread Thread

F1/F

Wrench Flats

2.17 (55)

.20 (5)

.39 (10)

.55 (14)

2.60 (66)

.24 (6)

.39 (10)

.67 (17)

3.03 (77)

.24 (6)

.39 (10)

.79 (20)

3.46 (88) .26 (6.5)

.39 (10)

.87 (22)

3.86 (98) .26 (6.5)

.39 (10)

.94 (24)

4.37 (111)

.28 (7)

.47 (12)

1.18 (30)

.31 (8)

.47 (12)

1.57 (40)

.31 (8)

.59 (15)

1.97 (50)

.35 (9)

.59 (15)

2.24 (57)

.39 (10)

.59 (15)

2.52 (64)

.16 - .31 (4 - 8) 3/8” NPT .68 (17.2) .83 (21) 2.60 (66) .59 (15) .08 - .24 (2 - 6) .24 - .47 (6 - 12) 1/2” NPT .83 (21.1) .94 (24) 3.46 (88) .51 (13) .20 - .35 (5 - 9) .51 - .71 (13 - 18) 3/4” NPT 1.05 (26.7) .98 (25) 4.37 (111) .51 (13) .35 - .63 (9 - 16) .12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .20 - .39 (5 - 10) .12 - .28 (3 - 7) .39 - .55 (10 - 14) .28 - .47 (7 - 12) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20) .87 - 1.26 (22 - 32) .79 - 1.02 (20 - 26) 1.26 - 1.50 (32 - 38) .98 - 1.22 (25 - 31) 1.46 - 1.73 (37 - 44) 1.14 - 1.38 (29 ( - 35)

.67 (17) / .75 (19) .87 (22) / .94 (24)

1.18 (30)

M12 x 1.5 .47 (12)

.75 (19) 2.17 (55) .26 (6.5)

.39 (10)

.55 (14)

M16 x 1.5 .63 (16)

.87 (22) 3.03 (77)

.24 (6)

.39 (10)

.79 (20)

M20 x 1.5 .79 (20)

.91 (23) 3.86 (98)

.24 (6)

.39 (10)

.94 (24)

M25 x 1.5 .98 (25)

.94 (24) 4.37 (111)

.28 (7)

.47 (12)

1.18 (30)

M32 x 1.5 1.26 (32) 1.22 (31)

.31 (8)

.47 (12)

1.57 (40)

M40 x 1.5 1.57 (40) 1.46 (37)

.31 (8)

.59 (15)

1.97 (50)

M50 x 1.5 1.97 (50) 1.46 (37)

.35 (9)

2.24 (57)

M63 x 1.5 2.48 (63) 1.50 (38)

.39 (10)

2.52 (64) / 2.68 (68)

*Note: VDE Approval oonly applies to Fittings with Metric Thread. UL, UR & CSA Approval applies to Dome Fittings.

Other Products / Index

Technical Information

Nickel NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings EMI/RFI Proof - PG/NPT/Metric & Elongated

EMI/RFI Fittings are also available with High Performance Clamp or in Stainless Steel. For inquiries - please call our Inside Technical Sales Department (800-456-9012 or 303-699-1135). les Departmen Dome Fittings also available with the following approvals:

For Material Specifications please refer to page 45 45. Dimensions and specifications may be changed without prior notice.

Nylon Strain Relief

NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Nickel EMI/RFI Proof - PG/NPT/Metric & Elongated EMI/RFI Proof - Grounded: Feed-Through Version (-FE) Part Numbers Dome Fittings Standard

Cable Range

Thread Type & Size

Dome Fittings Elongated lo

Inches (mm) .12 - .26 (3 - 6.5) PG 7 / 1/4” NPT .16 - .31 (4 - 8) PG 9 .20 - .39 (5 - 10) PG 11 .24 - .47 (6 - 12) PG 13 / 13.5 .39 - .55 (10 - 14) PG 16 .51 - .71 (13 - 18) PG 21 .71 - .98 (18 - 25) PG 29 .94 - 1.26 (24 - 32) PG 36 1.26 - 1.50 (32 - 38) PG 42 1.46 - 1.73 (37 - 44) PG 48

F1/F

Clearance Hole

Body Length

Thread Length Standard Thread

Thread Length Elongated Thread

Wrench Flats

.49 (12.5) .60 (15.2) .73 (18.5) .80 (20.3) .88 (22.3) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 2.13 (54.1) 2.34 (59.4)

.94 (24) 1.10 (28) 1.14 (29) 1.22 (31) 1.26(32) 1.50 (38) 1.69 (43) 1.89 (48) 1.77 (45) 1.81 (46)

.20 (5) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .31 (8) .31 (8) .35 (9) .39 (10)

.55 (14) .67 (17) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.57 (40) 1.97 (50) 2.24 (57) 2.52 (64)

+ .01” (+.25 mm)

Nickel Plated Brass

See page 49 for thread specs

Dimensions in Inches (mm)

CD09NA-FE CD13NA-FE CD21NA-FE

.16 - .31 (4 - 8) .24 - .47 (6 - 12) .51 - .71 (13 - 18)

3/8” NPT 1/2” NPT 3/4” NPT

.68 (17) .83 (21) 1.05 (27)

1.14 (29) 1.30 (33) 1.54 (39)

.59 (15) .51 (13) .51 (13)

.67 (17) / .75 (19) .87 (22) / .94 (24) 1.18 (30)

CD12MA-FE CD16MA-FE CD16MR-FE CD20MA-FE CD20MR-FE CD25MA-FE CD32MA-FE CD40MA-FE CD50MA-FE CD63MA-FE

CD12DA-FE CD16DA-FE CD16DR-FE CD20DA-FE CD20DR-FE CD25DA-FE CD32DA-FE CD40DA-FE CD50DA-FE CD63DA-FE

.12 - .26 (3 - 6.5) .20 - .39 (5 - 10) .16 - .31 (4 - 8) .39 - .55 (10 - 14) .24 - .47 (6 - 12) .51 - .71 (13 - 18) .71 - .98 (18 - 25) .94 - 1.26 (24 - 32) 1.26 - 1.50 (32 - 38) 1.46 - 1.73 (37 - 44)

M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.47 (12) .63 (16) .63 (16) .79 (20) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50) 2.48 (63)

.98 (25) 1.26 (32) 1.14 (29) 1.30 (33) 1.28 (32.5) 1.54 (39) 1.77 (45) 2.01 (51) 2.24 (57.5) 2.05 (52)

.26 (6.5) .24 (6) .24 (6) .24 (6) .24 (6) .28 (7) .31 (8) .31 (8) .35 (9) .39 (10)

.39 (10) .39 (10) .39 (10) .39 (10) .39 (10) .47 (12) .47 (12) .59 (15) .59 (15) .59 (15)

.55 (14) .79 (20) .67 (17) / .75 (19) .94 (24) .87 (22) 1.18 (30) 1.57 (40) 1.97 (50) 2.24 (57) 2.52 (64) / 2.68 (68)

Conduit System

Dome Fittings also available with the following approvals:

Technical Information

Total Jacket Removal

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Suggested Clearance Hole for Non-Threaded Mounting

Other Products / Index

Fold Shield Over Jacket Use our recommened EMI Locking Nuts with cutting edges which will cut through paint to ensure proper grounding. (see page 29) For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Adapter,Reducer,Enlarger

Partial Jacket Stripping

F1/F

Accessories

Feed-Through products are Quick, Reliable & Labor saving!

PVDF / Steel

AA CD07AA-FE CD09AA-FE CD11AA-FE CD13AA-FE CD16AA-FE CD21AA-FE CD29AA-FE CD36AA-FE CD42AA-FE CD48AA-FE

Nylon Strain Relief Nickel Plated Brass PVDF / Steel Accessories Adapter,Reducer,Enlarger Conduit System

Part Numbers Domee F Fittings Flex Fittings**

Thread Dimensions in Inches (mm) Type No. of Diameter Part & Size Holes of Holes Numbers of Inserts only

See page 49 for thread specs

PG 7 / CD07AP-BR CF07AP-BR AP 1/4” NPT CD09A1-BR CD09A2-BR CD09A3-BR CD09A4-BR CD09A5-BR CD09A6-BR CD09A7-BR CD09A8-BR CD09A9-BR CD09AP-BR

CF09A1-BR CF09A2-BR CF09A3-BR CF09A4-BR CF09A5-BR CF09A6-BR CF09A7-BR CF09A8-BR CF09A9-BR CF09AP-BR

CD11A1-BR CD11A2-BR CD11A3-BR CD11A4-BR CD11A5-BR CD11AP-BR

CF11A1-BR CF11A2-BR CF11A3-BR CF11A4-BR CF11A5-BR CF11AP-BR

CD13A1-BR CD13A2-BR CD13A3-BR CD13A4-BR CD13A5-BR CD13A6-BR CD13A7-BR CD13A8-BR CD13A9-BR CD13AP-BR

CF13A1-BR CF13A2-BR CF13A3-BR CF13A4-BR CF13A5-BR PG 13 / CF13A6-BR 13.5 CF13A7-BR CF13A8-BR CF13A9-BR CF13AP-BR

PG 9

PG 11

4 2 5 2 10 6 3 4 4 2 3 2 3 4 3 6 3 2 3 2 2 2 2

Part Numbers Domee F Fittings Flex Fittings**

See page 49 for thread specs

Inches

Solid Insert

1.089.0799.19

1.4 .06 3.0 .12 1.6 .06 1.7 .07 1.4 .06 1.4 .06 1.7 .07 1.7 .07 2.3 .09 Solid Insert

1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19

3.0 .12 3.0 .12 4.0 .16 1.5 .06 2.8 .11 Solid Insert

1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19

2.0 .08 3.0 .12 4.0 .16 5.0 .20 3.0 .12 5.2 .20 3.8 .15 4.2 .17 2.5 .10 Solid Insert

1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19

Thread Dimensions in Inches (mm) Type No. of Diameter Part & Size Holes of Holes Numbers of Inserts only

1A1-B CD21A1-BR CD21A2-BR CD21A3-BR CD21A4-BR CD21A5-BR CD21A6-BR CD21A7-BR

CF21A1-BR CF21A2-BR CF21A3-BR CF21A4-BR CF21A5-BR CF21A6-BR CF21A7-BR

CD21A8-BR

CF21A8-BR

PG 21

CD21A9-BR CF21A9-BR CD21AP-BR CF21AP-BR CD29A1-BR CD29A2-BR CD29A3-BR CD29AP-BR

CD36A1-BR CD36A2-BR CD36A3-BR CD36A4-BR CD36AP-BR

PG 36

CD42A1-BR CD42AP-BR

PG 42

CD48A1-BR CD48A2-BR CD48A3-BR CD48AP-BR

PG 29

PG 48

mm Inches 6.0 .24 7.0 .28 8.0 .31 5.0 .20 8.0 .31 5.2 .20 5.2 .20 5.2 / 4/1 3.7 .20/.15 2 7.4 .29 Solid Insert 4 3 2 4 1 4 3

1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19

6 4 4

6.5 .26 9.0 .35 9.5 .37 Solid Insert

1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19

5 7 6 2

9.0 .35 9.0 .35 8.0 .31 15.0 .59 Solid Insert

1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19

14.0 .55 Solid Insert

1.089.4203.19 1.089.4299.19

8 6 3

10.0 .39 12.0 .47 18.0 .71 Solid Insert

1.089.4800.19 1.089.4801.19 1.089.4802.19 1.089.4899.19

For specifications and dimensions see page 14 where the appropriate CD16A1-BR CF16A1-BR 3 3.0 .12 1.089.1600.19 Fittings are listed. CD16A2-BR CF16A2-BR 3 4.0 .16 1.089.1601.19 CD16A3-BR CF16A3-BR 4 4.0 .16 1.089.1602.19 CD16A4-BR CF16A4-BR 5 4.0 .16 1.089.1603.19 CD16A5-BR CF16A5-BR 6 4.0 .16 1.089.1604.19 CD16A6-BR CF16A6-BR PG 16 2 6.0 .24 1.089.1605.199 CD16A7-BR CF16A7-BR 3 5.6 .22 1.089.1606.199 CD16A8-BR CF16A8-BR 6 3.0 .12 1.089.1607.199 CD16A9-BR CF16A9-BR 4 3.0 .12 1.089.1610.19* 9* CD16A0-BR CF16A0-BR 6 3.8 .15 1.089.1609.19 19 CD16AP-BR CF16AP-BR Solid Insert 1.089.1699.19 Dome Fittings also available *Note: This Insert has slotted holes. with the following approvals: **Note: Flex Fittings are not a standard item, assembly required. Silicone

Other Products / Index

Technical Information

Nickel NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Multi-Hole - PG Threads

For Material Specifications please refer to page 45 45.

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Viton®

Viton® is a federally registered trademark of DuPont Dow Elastomer. Dimensions and specifications may be changed without prior notice.

Part Numbers me Fi Dome Fittings Flex Fittings**

Thread Dimensions in Inches (mm) Type No. of Diameter Part & Size Holes of Holes Numbers of Inserts only mm

PG 7 / CD07AP-BR CF07AP-BR AP 1/4” NPT

Fi Domee Fittings Flex Fittings**

See page 449 for thread specs

Inches

Solid Insert

1.089.0799.19

1.4 .06 3.0 .12 1.6 .06 1.7 .07 1.4 .06 1.4 .06 1.7 .07 1.7 .07 2.3 .09 Solid Insert

1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19

CD13N1-BR CD13N2-BR CD13N3-BR CD13N4-BR CD13N5-BR CD13N6-BR CD13N7-BR CD13N8-BR CD13N9-BR CD13NP-BR

CF13N1-BR CF13N2-BR CF13N3-BR CF13N4-BR CF13N5-BR 1/2” NPT CF13N6-BR CF13N7-BR CF13N8-BR CF13N9-BR CF13NP-BR

3 6 3 2 3 2 2 2 2

2.0 .08 3.0 .12 4.0 .16 5.0 .20 3.0 .12 5.2 .20 3.8 .15 4.2 .17 2.5 .10 Solid Insert

1.089.1300.19 1.089.1301.19 1.089.1302.19 1.089.1303.19 1.089.1304.19 1.089.1305.19 1.089.1306.19 1.089.1307.19 1.089.1308.19 1.089.1399.19

CD21N9-BR CF21N9-BR CD21NP-BR CF21NP-BR

CD29N1-BR 6 6.5 .26 CD29N2-BR 4 9.0 .35 1” NPT CD29N3-BR 4 9.5 .37 CD29NP-BR Solid Insert For specifications and dimensions see page 14 where the appropriate Fittings are listed.

1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19 1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Multi-Hole Inserts are available in Silicone and Viton® on request. Viton® is a federally registered trademark of DuPont Dow Elastomer.

Silicone

Viton®

Conduit System

CD16N1-BR CF16N1-BR 3 3.0 .12 1.089.1600.19 CD16N2-BR CF16N2-BR 3 4.0 .16 1.089.1601.19 CD16N3-BR CF16N3-BR 4 4.0 .16 1.089.1602.19 CD16N4-BR CF16N4-BR 5 4.0 .16 1.089.1603.19 CD16N5-BR CF16N5-BR 6 4.0 .16 1.089.1604.19 1/2” NPT CD16N6-BR CF16N6-BR 2 6.0 .24 1.089.1605.19 (Enlarged) CD16N7-BR CF16N7-BR 3 5.6 .22 1.089.1606.19 CD16N8-BR CF16N8-BR 6 3.0 .12 1.089.1607.19 CD16N9-BR CF16N9-BR 4 3.0 .12 1.089.1610.19* CD16N0-BR CF16N0-BR 6 3.8 .15 1.089.1609.19 CD16NP-BR CF16NP-BR Solid Insert 1.089.1699.19 *Note: This Insert has slotted holes. **Note: Flex Fittings are not a standard item, assembly required.

CD21N8-BR CF21N8-BR

mm Inches 6.0 .24 7.0 .28 8.0 .31 5.0 .20 8.0 .31 5.2 .20 5.2 .20 5.2 / 4/1 3.7 .20/.15 2 7.4 .29 Solid Insert 4 3 2 4 1 4 3

Adapter,Reducer,Enlarger

4 2 5 2 10 6 3 4 4

CF21N1-BR CF21N2-BR CF21N3-BR CF21N4-BR CF21N5-BR CF21N6-BR 3/4” NPT CF21N7-BR

Accessories

CF09N1-BR CF09N2-BR CF09N3-BR CF09N4-BR CF09N5-BR 3/8” NPT CF09N6-BR CF09N7-BR CF09N8-BR CF09N9-BR CF09NP-BR

1N1-B CD21N1-BR CD21N2-BR CD21N3-BR CD21N4-BR CD21N5-BR CD21N6-BR CD21N7-BR

PVDF / Steel

CD09N1-BR CD09N2-BR CD09N3-BR CD09N4-BR CD09N5-BR CD09N6-BR CD09N7-BR CD09N8-BR CD09N9-BR CD09NP-BR

Thread Dimensions in Inches (mm) Type No. of Diameter Part & Size Holes of Holes Numbers of Inserts only

Nickel Plated Brass

See page 449 for thread specs

Part Numbers

Nylon Strain Relief

NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Nickel Multi-Hole - NPT Threads

Dome Fittings also available with the following approvals:

Custom Solutions!

• • • • •

We suggest drilling the frozen solid Insert. Drill holes by using a standard high-speed steel drill bit of the proper size at approx. 2500 RPM. Drill holes with insert installed in Strain Relief Fitting as a fixture. Keep a distance of min. 1 mm (.04 in) between holes. The outside holes can be located right against the lip of the strain relief body, as sufficient insert material remains between the hole and the body wall due to the design of the cord grip.

Other Products / Index

Technical Information

Any special insert hole or profile configuration is available for a 1-time set-up fee & a minimum order of 1,000 pieces. For small quantities we suggest drilling or machining the inserts yourself, following these guidelines:

Nylon Strain Relief Nickel Plated Brass PVDF / Steel Accessories Adapter,Reducer,Enlarger Conduit System Technical Information Other Products / Index

Nickel NickelPlated PlatedBrass BrassLiquid LiquidTight TightStrain StrainRelief ReliefFittings Fittings Multi-Hole - Metric Threads Part Numbers Domee F Fittings Flex Fittings**

Thread Type & Size

Dimensions in Inches (mm) No. of Holes

See page 49 for thread specs

MP CD12MP-BR CF12MP-BR M12 x 1.5 CD16M1-BR CD16M2-BR CD16M3-BR CD16M4-BR CD16M5-BR CD16M6-BR CD16M7-BR CD16M8-BR CD16M9-BR CD16MP-BR

CF16M1-BR CF16M2-BR CF16M3-BR CF16M4-BR CF16M5-BR M16 x 1.5 CF16M6-BR CF16M7-BR CF16M8-BR CF16M9-BR CF16MP-BR

Diameter of Holes

4 2 5 2 10 6 3 4 4

Part Numbers of Inserts only

Part Numbers ** Domee F Fittings Flex Fittings

See page 49 for thread specs

Inches

Solid Insert

1.089.0799.19

1.4 .06 3.0 .12 1.6 .06 1.7 .07 1.4 .06 1.4 .06 1.7 .07 1.7 .07 2.3 .09 Solid Insert

1.089.0900.19 1.089.0901.19 1.089.0902.19 1.089.0903.19 1.089.0904.19 1.089.0905.19 1.089.0906.19 1.089.0907.19 1.089.0908.19 1.089.0999.19

Thread Dimensions in Inches (mm) Type No. of Diameter Part & Size Holes of Holes Numbers of Inserts only

5M1-B CD25M1-BR CD25M2-BR CD25M3-BR CD25M4-BR CD25M5-BR CD25M6-BR CD25M7-BR

CF25M1-BR CF25M2-BR CF25M3-BR CF25M4-BR CF25M5-BR CF25M6-BR CF25M7-BR

M25 x 1.5

CD25M8-BR CF25M8-BR CD25M9-BR CF25M9-BR CD25MP-BR CF25MP-BR CD32M1-BR CD32M2-BR CD32M3-BR CD32MP-BR

CD40M1-BR CD40M2-BR CD40M3-BR CD40M4-BR CD40MP-BR

M32 x 1.5

mm Inches 4 6.0 .24 3 7.0 .28 2 8.0 .31 4 5.0 .20 1 8.0 .31 4 5.2 .20 3 5.2 .20 5.2 / 4/1 3.7 .20/.15 2 7.4 .29 Solid Insert

1.089.2100.19 1.089.2101.19 1.089.2102.19 1.089.2103.19 1.089.2104.19 1.089.2105.19 1.089.2106.19 1.089.2107.19 1.089.2108.19 1.089.2199.19

6 4 4

6.5 .26 9.0 .35 9.5 .37 Solid Insert

1.089.2900.19 1.089.2901.19 1.089.2902.19 1.089.2999.19

5 7 6 2

9.0 .35 9.0 .35 8.0 .31 15.0 .59 Solid Insert

1.089.3600.19 1.089.3601.19 1.089.3602.19 1.089.3603.19 1.089.3699.19

CD17M1-BR CD17M2-BR CD17M3-BR CD17M4-BR CD17M5-BR CD17MP-BR

CF17M1-BR CF17M2-BR CF17M3-BR M16 x 1.5 CF17M4-BR (Enlarged) CF17M5-BR CF17MP-BR

2 3 2 3 4

3.0 .12 3.0 .12 4.0 .16 1.5 .06 2.8 .11 Solid Insert

1.089.1100.19 1.089.1101.19 1.089.1102.19 1.089.1103.19 1.089.1104.19 1.089.1199.19

CD20M1-BR CD20M2-BR CD20M3-BR CD20M4-BR CD20M5-BR CD20M6-BR CD20M7-BR CD20M8-BR CD20M9-BR CD20MP-BR

CF20M1-BR CF20M2-BR CF20M3-BR CF20M4-BR CF20M5-BR M20 x 1.5 CF20M6-BR CF20M7-BR CF20M8-BR CF20M9-BR CF20MP-BR

3 6 3 2 3 2 2 2 2

2.0 .08 3.0 .12 4.0 .16 5.0 .20 3.0 .12 5.2 .20 3.8 .15 4.2 .17 2.5 .10 Solid Insert

1.089.1300.19 1.089.1301.19 1.089.1302.19 CD50M1-BR 3 14.0 .55 1.089.4203.19 M50 x 1.5 1.089.1303.19 CD50MP-BR Solid Insert 1.089.4299.19 1.089.1304.19 8 10.0 .39 1.089.4800.19 1.089.1305.19 CD63M1-BR 6 12.0 .47 1.089.4801.19 M63 x 1.089.1306.19 CD63M2-BR 1.5 3 18.0 .71 1.089.4802.19 1.089.1307.19 CD63M3-BR CD63MP-BR Solid Insert 1.089.4899.19 1.089.1308.19 1.089.1399.19 For specifications and dimensions see page 14 where the appropriate Fittings are listed. 1.089.1600.19 1.089.1601.19 1.089.1602.19 Optional Locking Nuts, O-Rings 1.089.1603.19 & Other Accessories starting 1.089.1604.19 on page 28 & 29. 1.089.1605.19

CD22M1-BR CF22M1-BR 3 3.0 .12 CD22M2-BR CF22M2-BR 3 4.0 .16 CD22M3-BR CF22M3-BR 4 4.0 .16 CD22M4-BR CF22M4-BR 5 4.0 .16 CD22M5-BR CF22M5-BR 6 4.0 .16 M20 x 1.5 CD22M6-BR CF22M6-BR 2 6.0 .24 (Enlarged) CD22M7-BR CF22M7-BR 3 5.6 .22 1.089.1606.19 CD22M8-BR CF22M8-BR 6 3.0 .12 1.089.1607.19 CD22M9-BR CF22M9-BR 4 3.0 .12 1.089.1610.19* CD22M0-BR CF22M0-BR 6 3.8 .15 1.089.1609.19 CD22MP-BR CF22MP-BR Solid Insert 1.089.1699.19 *Note: This Insert has slotted holes. **Note: Flex Fittings are not a standard item, assembly required.

M40 x 1.5

Dome Fittings also available with the following approvals: Insert

How to feed a cable assembly with plug through a strain relief fitting: 1. Determine largest dimension of the plug. Strain Relief 2. Choose Strain Relief with appropriate Dome opening (see table on page 48). 3. Drill solid insert to exact cable diameter & slice insert on one side only. 4. abody, snap insert over cable and insert into body, tighten dome me nut. Done. 5. This applies to PG, NPT or Metric solutions. 24

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Dome Nut Dome Opening

Plug

Nylon Strain Relief

PVDF Liquid Tight Strain Relief Fittings Teflon® - PG/NPT/Metric Threads

Viton® - High/Low Temperatures & Chemical Resistant Part Numbers ittings Dome Fittings

Cable Range

Flex Fittings

CF12MA-TE CF12MR-TE CF16MA-TE CF16MR-TE CF20MA-TE CF20MR-TE -

.12 - .26 (3 - 6.5) .08 - .20 (2 - 5) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20)

F1/F

Clearance Hole

Body Length (Dome)

Body Length (Flex)

Thread Length

Wrench Flats

+ .01” (+.25 mm)

PG7 / 1/4” NPT

.49 (12.5)

.83 (21)

2.13 (54)

.31 (8)

.59 (15)

PG 9

.60 (15.2)

.87 (22)

2.48 (63)

.31 (8)

.75 (19)

PG 11

.73 (18.5)

.98 (25)

.31 (8)

.87 (22)

PG 13 / 13.5

.80 (20.3)

1.06 (27)

3.54 (90)

.35 (9)

.94 (24)

PG 16

.89 (22.5)

1.10 (28)

.39 (10)

1.06 (27)

PG 21

1.12 (28.4)

1.22 (31)

.43 (11)

1.30 (33)

PG 29

1.47 (37.3)

1.54 (39)

.43 (11)

1.65 (42)

PG 36

1.85 (47)

1.89 (48)

.51 (13)

2.09 (53)

PG 42

2.13 (54.1)

1.93 (49)

.51 (13)

2.36 (60)

PG 48

2.34 (59.4)

1.93 (49)

.55 (14)

2.56 (65)

3/8” NPT

.68 (17.2)

.87 (22)

2.13 (54)

.59 (15)

.87 (22) / .75 (19)

1/2” NPT

.83 (21.1)

1.06 (27)

2.48 (63)

.51 (13)

.94 (24)

1/2” NPT

.83 (21.1)

1.10 (28)

.51 (13)

1.06 (27)

3/4” NPT

1.05 (26.7)

1.22 (31)

.55 (14)

1.30 (33)

M12 x 1.5

.47 (12)

.83 (21)

2.13 (54)

.31 (8)

.59 (15)

M16 x 1.5

.63 (16)

.87 (22)

2.48 (63)

.31 (8)

.75 (19)

M20 x 1.5

.79 (20)

1.06 (27)

3.54 (90)

.35 (9)

.94 (24)

M25 x 1.5

.98 (25)

1.22 (31)

.43 (11)

1.30 (33)

M32 x 1.5

1.26 (32)

1.54 (39)

.43 (11)

1.65 (42)

Viton® and Teflon® are federally registered trademarks of DuPont Dow Elastomer. *Note: VDE Approval only applies to Fittings with Metric Thread Thread.

Ideal for: • Food & Beverage Industries • Clean Room Applications • High Temperature Applications

F1/F A

Suggested Clearance Hole for Non-Threaded Mounting

Other Products / Ind Index

PVDF (Teflon®) Body

Viton® Insert For Material Specifications pecifications please refer to page 45 45.

Dimensions and specifiand cations bemay changed without prior Dimensions specifimay cations be changed without priornotice. notice.

Technical Information

CD12MA-TE CD12MR-TE CD16MA-TE CD16MR-TE CD20MA-TE CD20MR-TE CD25MA-TE CD25MR-TE CD32MA-TE CD32MR-TE

Conduit System

.16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .39 - .55 (10 - 14) .28 - .47 (7 - 12) .51 - .71 (13 - 18) .35 - .63 (9 - 16)

Adapter,Reducer,Enlarger

CF09NA-TE CF09NR-TE CF13NA-TE CF13NR-TE -

Accessories

CD09NA-TE CD09NR-TE CD13NA-TE CD13NR-TE CD16NA-TE CD16NR-TE CD21NA-TE CD21NR-TE

PVDF / Steel

CF07AA-TE CF07AR-TE CF09AA-TE CF09AR-TE CF13AA-TE CF13AR-TE -

See page 49 for thread specs

Dimensions in Inches (mm)

Nickel Plated Brass

CD07 CD07AA-TE CD07AR-TE CD09AA-TE CD09AR-TE CD11AA-TE CD11AR-TE CD13AA-TE CD13AR-TE CD16AA-TE CD16AR-TE CD21AA-TE CD21AR-TE CD29AA-TE CD29AR-TE CD36AA-TE CD36AR-TE CD42AA-TE CD42AR-TE CD48AA-TE CD48AR-TE

Thread Type & Size

Nylon Nylon Strain Strain Relief Relief

Nickel Liquid Brass Tight Liquid Strain Tight Relief Strain Fittings Relief NickelPlated Plated Brass Liquid Tight Strain ReliefFittings Fittings PVDF - PG/NPT/Metric & Elongated Threads *

Viton® - High/Low Temperatures & Chemical Resistant Part Numbers

Cable Range

Thread Type & Size

Ni k l Plated Pl d Brass B s Nickel Nickel Plated Brass

Dome Fittings Dome Fittings Standard Thread Elongated Thread

Technical Technical Information Information

Conduit Conduit System System

Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

A i s Accessories Accessories

PV PVDF S eeel PVDF // Steel Steel

See page 49 for thread specs

CD07AA-RV CD07AR-RV CD09AA-RV CD09AR-RV CD11AA-RV CD11AR-RV CD13AA-RV CD13AR-RV CD16AA-RV CD16AR-RV CD21AA-RV CD21AR-RV CD29AA-RV CD29AR-RV CD36AA-RV CD36AR-RV CD42AA-RV CD42AR-RV CD48AA-RV CD48AA-RV

CD07CA-RV CD07CR-RV CD09CA-RV CD09CR-RV CD11CA-RV CD11CR-RV CD13CA-RV CD13CR-RV CD16CA-RV CD16CR-RV CD21CA-RV CD21CR-RV CD29CA-RV CD29CR-RV CD36CA-RV CD36CR-RV CD42CA-RV CD42CR-RV CD48CA-RV CD48CA-RV

CD09NA-RV CD09NR-RV CD13NA-RV CD13NR-RV CD21NA-RV CD21NR-RV

.16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .51 - .71 (13 - 18) .35 - .63 (9 - 16)

CD12MA-RV CD12MR-RV CD16MA-RV CD16MR-RV CD17MA-RV CD17MR-RV CD20MA-RV CD20MR-RV CD22MA-RV CD22MR-RV CD25MA-RV CD25MR-RV CD32MA-RV CD32MR-RV CD40MA-RV CD40MR-RV

CD12DA-RV CD12DR-RV CD16DA-RV CD16DR-RV CD17DA-RV CD17DR-RV CD20DA-RV CD20DA-RV CD22DA-RV CD22DR-RV CD25DA-RV CD25DR-RV CD32DA-RV CD32DR-RV CD40DA-RV CD40DR-RV

F1/F

Dimensions in Inches (mm) A

Clearance Hole

Body Length

F1/F

Thread Thread Length Length Standard Elongated Thread Thread

Wrench Flats

+ .01” (+.25 mm)

.49 (12.5)

.75 (19)

.20 (5)

.39 (10)

.55 (14) A

.60 (15.2)

.83 (21)

.24 (6)

.39 (10)

.67 (17)

.73 (18.5)

.87 (22)

.24 (6)

.39 (10)

.79 (20)

.80 (20.3)

.94 (24)

.26 (6.5)

.39 (10)

.87 (22)

.89 (22.5)

.94 (24)

.26 (6.5)

.39 (10)

.94 (24)

1.12 (28.4) 1.02 (26)

.28 (7)

.47 (12)

1.18 (30)

1.47 (37.3) 1.14 (29)

.31 (8)

.47 (12)

1.57 (40)

1.38 (35)

.31 (8)

.59 (15)

1.97 (50)

2.13 (54.1) 1.46 (37)

.35 (9)

.59 (15)

2.24 (57)

2.34 (59.4) 1.50 (38)

.39 (10)

.59 (15)

2.52 (64)

3/8” NPT

.68 (17.2)

.83 (21)

.59 (15)

1/2” NPT

.83 (21.1)

.94 (24)

.51 (13)

3/4” NPT 1.05 (26.7) 1.02 (26)

.51 (13)

1.18 (30)

M12 x 1.5

.47 (12)

.75 (19)

.26 (6.5)

.39 (10)

.55 (14)

M16 x 1.5

.63 (16)

.83 (21)

.24 (6)

.39 (10)

.67 (17) / .75 (19)

M16 x 1.5

.63 (16)

.87 (22)

.24 (6)

.39 (10)

.79 (20)

M20 x 1.5

.79 (20)

.91 (23)

.24 (6)

.39 (10)

.87 (22)

M20 x 1.5

.79 (20)

.94 (24)

.24 (6)

.39 (10)

.94 (24)

M25 x 1.5

.98 (25)

1.02 (26)

.28 (7)

.47 (12)

1.18 (30)

M32 x 1.5

1.26 (32)

1.22 (31)

.31 (8)

.47 (12)

1.57 (40)

M40 x 1.5

1.57 (40)

1.46 (37)

.31 (8)

.59 (15)

1.97 (50)

1.85 (47)

Suggested Clearance Hole for Non-Threaded Mounting

.67 (17) / .75 (19) .87 (22) / .94 (24)

Viton and Teflon is a federally registered trademark of DuPont Dow Elastomer. *Note: VDE Approval only applies to Fittings with Metric Thread.

O e Products Ot Other oduc s // Index dex Other Products Index

Dome Fittings also available with the following approvals:

• High Performance • Extreme Temperatures • Sturdy Viton Insert ®

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

PVDF (Teflon®) Clamping Insert

Viton® O-Ring

High Performance, High/Low Temperatures & Corrosion Resistant Part Numbers Standar Standard

Cable Range

PVDF

Thread Type & Size

Clearance Hole

Body Length

Thread Length

Wrench Flats

Typical applications include:

+ .01” +.25 mm)

.49 (12.5)

.75 (19)

.20 (5)

.55 (14)

.60 (15.2)

.83 (21)

.24 (6)

.67 (17)

.73 (18.5)

.87 (22)

.24 (6)

.87 (22)

.80 (20.3)

.94 (24)

.26 (6.5)

.87 (22)

.89 (22.5)

.91 (23)

.26 (6.5)

.94 (24)

1.12 (28.4)

.94 (24)

.28 (7)

1.18 (30)

1.47 (37.3)

1.14 (29)

.31 (8)

1.61 (41)

1.85 (47)

1.38 (35)

.31 (8)

1.97 (50)

• • • • • •

Off-shore Marine Chemical Plants Food Processing Clean Room Other Rugged Applications F1/F

M12 x 1.5

.47 (12)

.75 (19)

.26 (6.5)

.55 (14)

M16 x 1.5

.63 (16)

.87 (22)

.24 (6)

.87 (22)

M20 x 1.5

.79 (20)

.91 (23)

.24 (6)

.94 (24)

M25 x 1.5

.98 (25)

.94 (24)

.28 (7)

1.18 (30)

Stainless Steel (303), Nickel Plated Brass & Nylon Locking Nuts and Other Accessories available on page 28 & 29. A

M32 x 1.5

1.26 (32)

1.14 (29)

.31 (8)

1.61 (41)

M40 x 1.5

1.57 (40)

1.38 (35)

.31 (8)

1.97 (50)

Suggested Clearance Hole for Non-Threaded Mounting

Dome Fittings also available with the following approvals:

Conduit Sy stem Conduit System

316 INOX Stainless Steel also available in NPT Threads upon request *Note: VDE Approval only applies to Fittings with Metric Thread.

Adapter,Reducer,Enlarger

CD12MA-SV .12 - .26 (3 - 6.5) CD12MR-SV .08 - .20 (2 - 5) CD16MA-SV .20 - .39 (5 - 10) CD16MR-SV .12 - .28 (3 - 7) CD20MA-SV .39 - .55 (10 - 14) CD20MR-SV .28 - .47 (7 - 12) CD25MA-SV .51 - .71 (13 - 18) CD25MR-SV .35 - .63 (9 - 16) CD32MA-SV .71 - .98 (18 - 25) CD32MR-SV .51 - .79 (13 - 20) CD40MA-SV .87 - 1.26 (22 - 32) CD40MR-SV .79 - 1.02 (20 - 26)

F1/F

Accessories

CD12MA-SS CD12MR-SS CD16MA-SS CD16MR-SS CD20MA-SS CD20MR-SS CD25MA-SS CD25MR-SS CD32MA-SS CD32MR-SS CD40MA-SS CD40MR-SS

PVDF / Steel Stee

Has a Viton® 49 for thread Inches (mm) specs Insert CD07AA-SV .12 - .26 (3 - 6.5) PG 7 CD07AR-SV .08 - .20 (2 - 5) CD09AA-SV .16 - .31 (4 - 8) PG 9 CD09AR-SV .08 - .24 (2 - 6) CD11AA-SV .20 - .39 (5 - 10) PG 11 CD11AR-SV .12 - .28 (3 - 7) CD13AA-SV .24 - .47 (6 - 12) PG 13 / 13.5 CD13AR-SV .20 - .35 (5 - 9) CD16AA-SV .39 - .55 (10 - 14) PG 16 CD16AR-SV .28 - .47 (7 - 12) CD21AA-SV .51 - .71 (13 - 18) PG 21 CD21AR-SV .35 - .63 (9 - 16) CD29AA-SV .71 - .98 (18 - 25) PG 29 CD29AR-SV .51 - .79 (13 - 20) CD36AA-SV .87 - 1.26 (22 - 32) PG 36 CD36AR-SV .79 - 1.02 (20 - 26)

Nickel Plated Brass

See page

Has a Buna-N (NBR) Insert CD07AA-SS CD07AR-SS CD09AA-SS CD09AR-SS CD11AA-SS CD11AR-SS CD13AA-SS CD13AR-SS CD16AA-SS CD16AR-SS CD21AA-SS CD21AR-SS CD29AA-SS CD29AR-SS CD36AA-SS CD36AR-SS

Dimensions in Inches (mm) A

Stainless Steel Strain Relief Fittings can be used in many applications, where the environment dictates a corrosion proof solution.

Nylon Strain Relief Relie

Nickel Plated Liquid Brass Tight Liquid Strain Tight Relief Strain Fittings ReliefFittings Fittings Stainless Steel Nickel Plated Brass Liquid Tight Strain Relief (303) INOX - NPT Threads

Stainless Steel Liquid Tight Strain Relief Fittings (316) INOX - NPT Threads *

High Performance, High/Low Temperatures & Corrosion Resistant Part Numbers

Has a Viton® Insert CD09NA-6V CD09NR-6V CD13NA-6V CD13NR-6V CD21NA-6V CD21NR-6V

Inches (mm) .16 - .31 (4 - 8) .08 - .24 (2 - 6) .24 - .47 (6 - 12) .20 - .35 (5 - 9) .51 - .71 (13 - 18) .35 - .63 (9 - 16) .71 - .98 (18 - 25) .51 - .79 (13 - 20)

Thread Type & Size

Dimensions in Inches (mm) A

F1/F

Clearance Hole

Body Length

Thread Length

Wrench Flats

See page 49 for thread specs

+ .01” +.25 mm)

3/8” NPT

.68 (17.2)

.83 (21)

.59 (15)

1/2” NPT

.83 (21.1)

.94 (24)

.51 (13)

3/4” NPT

1.05 (26.7)

.98 (25)

.51 (13)

1.18 (30)

1” NPT

1.35 (34.3)

1.14 (29)

.75 (19)

1.57 (40)

303 INOX Stainless Steel also available in PG and Metric Threads upon request *Note: VDE Approval only applies to Fittings with Metric Thread. Dimensions and specifications may be changed without prior notice.

.67 (17) / .75 (19) .87 (22) / .94 (24)

The 316 materiall is muc much harder and ideal for direct exposure to salt lt wat water and chemical solutions in marine, off-shore, hore, pharmaceutic pharmaceutical, etc.

PVDF (Teflon®) Clamping Insert

For Material Specifications please refer to page 45.

Other Products / Index

Has a Buna-N (NBR) Insert CD09NA-6S CD09NR-6S CD13NA-6S CD13NR-6S CD21NA-6S CD21NR-6S CD29NA-6S CD29NR-6S

Cable Range

PVDF

Technical Information

Standard

Nylon Strain Relief

Accessories for Strain Relief Fittings Summary Page 29 - Locking Nuts

Locking Nuts - Page 28

EMI/RFI Proof (Nickel Plated Brass) • Zinc Plated Steel • Stainless Steel (303) - INOX •

• Black & Gray Nylon • Nickel Plated Brass

Page 30 - Seal Rings

Nickel Plated Brass

O-Rings - Page 30 • Buna-N • Viton®

Polyethylene • Fiber-Reinforced Plastic •

• Silicone

Page 30/32 - Blind Plug/Clamp

Hole Plug - Page 31-32 Dome Plugs: • Black & Gray Nylon • Nickel Plated Brass

Blind Plugs: Black Nylon •

Hex Plugs: • Black Nylon • Nickel Plated Brass • Stainless Steel

PVDF / Steel

Wrenches - Page 33

Page 34-35 - Thread Adapters Converts a Type of (NPT, PG, Metric) Threads Black Nylon • Nickel Plated Brass •

• Socket Wrenches • Ratchet Wrenches Thread Reducers - Page 36-38

Page 39 - Thread Enlarger Enlarges a Type of (NPT, PG, Metric) Threads Black Nylon • Nickel Plated Brass •

Accessories

Reduces a Type of (NPT, PG, Metric) Thread • Gray Nylon • Black Nylon • Nickel Plated Brass • Stainless Steel

Accessories for Strain Relief Fittings Locking Nuts - PG/NPT/Metric Threads Black & Gray Nylon Locking Nuts

Technical Information

Conduit System

Adapter,Reducer,Enlarger

Part Numbers

Other Products / Index

Cable Clamp:

Nickel Plated Brass •

Black

Grayy

Thread Type & Size See page 49 for thread specs

Nickel Plated Brass Locking Nuts

Dimensions in Inches (mm) G

Thickness

Wrench Flats

Part Numbers Nickel Plated Brass

Thread Type & Size See page 49 for thread specs

Nylon Locknuts

Dimensions in Inches (mm) G

Thickness

Wrench Flats

.11 (2.8) .11 (2.8) .12 (3)

.59 (15) .71 (18) .83 (21)

.12 (3)

.91 (23)

.12 (3) .14 (3.5) .16 (4) .20 (5) .20 (5) .22 (5.5)

1.02 (26) 1.26 (32) 1.61 (41) 2.01 (51) 2.36 (60) 2.52 (64)

.20 (5) .20 (5) .20 (5)

.75 (19) .87 (22) .94 (24)

NP-07-BR NP-09-BR NP-11-BR

.24 (6)

1.06 (27)

NP-13-BR

NP-16-GY NP-21-GY NP-29-GY NP-36-GY NP-42-GY NP-48-GY

PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

.24 (6) .28 (7) .28 (7) .31 (8) .31 (8) .31 (8)

1.18 (30) 1.41 (36) 1.81 (46) 2.36 (60) 2.56 (65) 2.76 (70)

NP-16-BR NP-21-BR NP-29-BR NP-36-BR NP-42-BR NP-48-BR

PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

NN-09-BK NN-13-BK NN-21-BK NN-29-BK

NN-09-GY NN-13-GY NN-21-GY NN-29-GY

3/8” NPT 1/2” NPT 3/4” NPT 1” NPT

.28 (7) .24 (6) .28 (7) .28 (7)

.94 (24) 1.06 (27) 1.26 (32) 1.57 (40)

NN-09-BR NN-13-BR NN-21-BR NN-29-BR

3/8” NPT 1/2” NPT 3/4” NPT 1” NPT

.14 (3.5) .12 (3) .14 (3.5) .14 (3.5)

.75 (19) .94 (24) 1.18 (30) 1.38 (35)

NM-12-BK NM-16-BK NM-20-BK NM-25-BK NM-32-BK NM-40-BK NM-50-BK NM-63-BK

NM-12-GY NM-16-GY NM-20-GY NM-25-GY NM-32-GY NM-40-GY NM-50-GY NM-63-GY

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.20 (5) .20 (5) .24 (6) .26 (6.5) .28 (7) .28 (7) .31 (8) .31 (8)

.67 (17) .87 (22) 1.06 (27) 1.26 (32) 1.61 (41) 1.97 (50) 2.36 (60) 2.95 (75)

NM-06-BR NM-08-BR NM-10-BR NM-12-BR NM-16-BR NM-20-BR NM-25-BR NM-32-BR NM-40-BR NM-50-BR NM-63-BR

M6 x 1.0 M8 x 1.25 M10 x 1.5 M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.10 (2.5) .10 (2.5) .11 (2.8) .11 (2.8) .11 (2.8) .12 (3) .14 (3.5) .16 (4) .18 (4.5) .22 (5.5) .24 (6)

.39 (10) .51 (13) .51 (13) .59 (15) .75 (19) .91 (23) 1.14 (29) 1.42 (36) 1.77 (45) 2.17 (55) 2.76 (70)

NP-07-BK NP-09-BK NP-11-BK

NP-07-GY NP-09-GY NP-11-GY

NP-13-BK

NP-13-GY

NP-16-BK NP-21-BK NP-29-BK NP-36-BK NP-42-BK NP-48-BK

For Material Specifications please refer to page 45.

G Wrench Flat (H)

Nickel Plated Brass Locknut

Viton® is a federally registered trademark of DuPont Dow Elastomer. V Dimensions and specifications may be changed without prior notice.

The These ese Locking Nuts have cutting edges which w will slice through paint coatings on a meta metal enclosure to ensure grounding.

EMI/RFI - Nickel Plated Brass Locking Nuts Part Numbers

Dimensions in Inches (mm) G

Thickness

Wrench Flats

.11 (2.8) .11 (2.8) .12 (3)

.59 (15) .71 (18) .83 (21)

See page 49 for thread specs

1.02 (26) 1.26 (32) 1.61 (41) 2.01 (51) 2.36 (60) 2.52 (64)

NN-13-BE

1/2” NPT

.12 (3)

.94 (24)

NM-12-BE NM-16-BE NM-20-BE NM-25-BE NM-32-BE NM-40-BE NM-50-BE NM-63-BE

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.11 (2.8) .11 (2.8) .12 (3) .14 (3.5) .20 (5) .20 (5) .20 (5) .24 (6)

.59 (15) .75 (19) .94 (24) 1.18 (30) 1.42 (36) 1.81 (46) 2.36 (60) 2.76 (70)

Zinc Plated Steel Locking Nuts Part Numbers

Thread Type & Size See page 49 for thread specs

1” NPT 1-1/4” NPT 1-1/2” NPT

NN-10-ST NN-34-ST NN-36-ST

Dimensions in Inches (mm) G

Thickness

Wrench Flats

.24 (6) .20 (5) .16 (4)

1.73 (44) 2.01 (53) 2.19 (55.5)

G Wrench Flat (H)

Note: BE-Locknuts have the following approvals: CE & German Lloyd.

Adapter,Reducer,Enlarger

.12 (3) .14 (3.5) .16 (4) .20 (5) .20 (5) .24 (6)

G Wrench Flat (H)

Accessories

.91 (23)

NP-13-BE

EMI /RFI Proof Locknut L k t

Zinc Plated lated Stee Steel Locknut ut

Typical applications for Stainless Steel: Off-shore, Marine, Chemical Plants, Food Processing, Clean Room, Other Rugged Applications Stainless Steel (303) Locking Nuts Part Numbers um

Dimensions in Inches (mm)

.11 (2.8) .11 (2.8) .12 (3)

.67 (17) .87 (22) .87 (22)

.12 (3)

.94 (24)

NP-16-SS NP-21-SS NP-29-SS NP-36-SS

PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36

.12 (3) .14 (3.5) .16 (4) .20 (5)

1.06 (27) 1.26 (32) 1.61 (41) 1.97 (50)

NM-12-SS NM-16-SS NM-20-SS NM-25-SS NM-32-SS NM-40-SS NM-50-SS NM-63-SS

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.12 (3) .12 (3) .12 (3) .16 (4) .20 (5) .20 (5) .20 (5) .24 (6)

.67 (17) .75 (19) .94 (24) 1.06 (27) 1.42 (36) 1.81 (46) 2.17 (55) 2.76 (70)

See page 49 for thread specs

NP-07-SS NP-0 NP-09-SS NP-11-SS NP-13-SS

Nickel Plated Brass Locknut

Nylon Locknut

Stainless Steel (303) Locknut Zinc Plated Steel Locknut G Wrench Flat (H)

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Other Products / Index

H Wrench Flats

Technical Information

G Thickness

Conduit System

Thread Type & Size

PVDF / Steel

.12 (3)

NP-16-BE NP-21-BE NP-29-BE NP-36-BE NP-42-BE NP-48-BE

PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

-07-BE NP-07-BE NP-09-BE NP-11-BE

Nickel Plated Brass

Nickel P Plated Brass w/ Cutting Edges

Thread Type & Size

Nylon Strain Relief

Accessories for Strain Relief Fittings Locking Nuts - PG/NPT/Metric Threads

Nylon Strain Relief

Accessories for Strain Relief Fittings O-Rings & Seal Rings - PG/NPT/Metric Threads Seal Rings Part Numbers

Nickel Plated Brass

Polyethylene

See page 49 for thread specs

PVDF / Steel Accessories Adapter,Reducer,Enlarger Conduit Co C o System

Fiber-reinforced Plastic lastic

Thread Type & Size

SR-07-NY SR-09-NY SR-11-NY

SR 07 SR-07-HD SR-09-HD SR-11-HD

SR-13-NY

SR-13-HD

SR-16-NY SR-21-NY SR-29-NY SR-36-NY SR-42-NY SR-48-NY

SR-16-HD SR-21-HD SR-29-HD SR-36-HD SR-42-HD SR-48-HD

SR-38-NY SR-18-NY SR-34-NY SR-10-02 SR-14-NY

O-Rings Part Numbers

Dimensions in Inches (mm) A

Inner Outer Diameter Diameter

PG 7 .49 (12.5) .65 (16.5) PG 9 .60 (15.2) .75 (19) PG 11 .73 (18.6) .89 (22.5) PG 13 / .80 (20.4) .98 (25) 13.5 PG 16 .89 (22.5) 1.06 (27) PG 21 1.11 (28.3) 1.32 (33.5) PG 29 1.46 (37) 1.71 (43.5) PG 36 1.85 (47) 2.17 (55) PG 42 2.13 (54) 2.48 (63) PG 48 2.33 (59.3) 2.72 (69) 3/8” NPT .67 (17) 1/2” NPT .83 (21) 3/4” NPT 1.06 (27) 1” NPT 1.32 (33.5) 1-1/4” NPT .63 (41.5)

.87 (22) 1.0 (25) 1.43 (36) 1.71 (43) 1.95 (49)

Buna-N

Viton®

Thread Type & Size

Silicone

Height

Dimensions in Inches (mm)

See page 49 for thread specs

PG 7 PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

Inner Diameter

Height

.39 (10) .47 (12) .63 (16)

.06 (1.5) .06 (1.5) .06 (1.5)

.67 (17)

.07 (1.8)

.71 (18) 1.02 (26) 1.30 (33) 1.73 (44) 1.97 (50) 2.16 (55)

.06 (1.5) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2)

.06 (1.5) .06 (1.5) .06 (1.5)

OR-07-BN OR-09-BN OR-11-BN

OR-07-VT OR-09-VT OR-11-VT

OR-07-SI OR-09-SI OR-11-SI

.06 (1.5)

OR-13-BN

OR-13-VT

OR-13-SI

.06 (1.5) .06 (1.5) .08 (2) .08 (2) .08 (2) .08 (2)

OR-16-BN OR-21-BN OR-29-BN OR-36-BN OR-42-BN OR-48-BN

OR-16-VT OR-21-VT OR-29-VT OR-36-VT OR-42-VT OR-48-VT

OR-16-SI OR-21-SI OR-29-SI OR-36-SI OR-42-SI OR-48-SI

.06 (1.5) .06 (1.5) .04 (1) .09 (2.2) .06 (1.5)

OR-38-BN OR-18-BN OR-34-BN OR-10-BN OR-54-BN OR-64-BN

OR-38-VT OR-18-VT OR-34-VT OR-10-VT OR-54-VT OR-64-VT

OR-38-SI 3/8” NPT OR-18-SI 1/2” NPT OR-34-SI 3/4” NPT OR-10-SI 1” NPT OR-54-SI 1-1/4” NPT OR-64-SI 1-1/2” NPT

.51 (13) .75 (19) .87 (22) 1.14 (29) 1.50 (38) 1.77 (45)

.08 (2) .07 (1.8) .08 (2) .08 (2) .10 (2.5) .10 (2.5)

OM-12-BN OM-16-BN OM-20-BN OM-25-BN OM-32-BN OM-40-BN OM-50-BN OM-63-BN

OM-12-VT OM-16-VT OM-20-VT OM-25-VT OM-32-VT OM-40-VT OM-50-VT OM-63-VT

OM-12-SI OM-16-SI OM-20-SI OM-25-SI OM-32-SI OM-40-SI OM-50-SI OM-63-SI

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.39 (10) .47 (12) .67 (17) .87 (22) 1.14 (29) 1.38 (35) 1.69 (43) 2.17 (55)

.06 (1.6) .06 (1.6) .07 (1.8) .08 (2) .08 (2) .08 (2) .08 (2) .08 (2)

SM-12-NY SM-12-HD M12 x 1.5 .47 (12) .63 (16) .08 (2) SM-16-NY SM-16-HD M16 x 1.5 .63 (16) .79 (20) .08 (2) SM-20-NY SM-20-HD M20 x 1.5 .79 (20) .94 (24) .08 (2) SM-25-NY SM-25-HD M25 x 1.5 .98 (25) 1.22 (31) .08 (2) SM-32-NY SM-32-HD M32 x 1.5 1.26 (32) 1.50 (38) .08 (2) SM-40-NY SM-40-HD M40 x 1.5 1.57 (40) 1.96 (48) .08 (2) SM-50-NY SM-50-HD M50 x 1.5 1.97 (50) 2.28 (58) .08 (2) SM-63-NY SM-63-HD M63 x 1.5 2.48 (63) 2.83 (72) .08 (2) If NEMA 4x or 6 (IP 68 or IP 69K - Submersible) is required, O-Rings or Seal Rings should be used when mounting Strain Relief Fittings to a control panel, secured with a Locking Nut. The straight Strain Relief Fittings feature a molded O-Ring groove. For these fittings the O-Ring is the best solution. The Snap Elbows and some of the Conduit O-Ring Groove Fittings don’t have a recess for an O-Ring. In that case, the Seal Ring would be the better choice, unless the hole can be beveled to accommodate an O-Ring.

Viton® is a federally registered trademark of DuPont Dow Elastomer. O-Ring Groove

A B

Technical Information ormation

Accessories for Strain Relief Fittings Blind Plugs - Nylon - fit PG/NPT/Metric Threads These non-threaded Plugs are made of Black Nylon (RAL 9005) and fit PG, NPT and Metric Strain Relief Fittings. g

Part Numbers

Other Products / Index

Inserts into Dome Nut for a liquid tight seal! 30

For Mat Material ial Specificati Specifications pl please refer to page 45.

PL-07-BK PL-09-BK PL-11-BK PL-13-BK PL-16-BK PL-21-BK PL-29-BK PL-36-BK PL-42-BK PL-48-BK

Fits PG Thread

Fits NPT Thread

See page 49 for thread specs

PG 7 PG 9 3/8” NPT PG 11 PG 13 / 13.5 1/2” NPT PG 16 1/2” NPT PG 21 3/4” NPT PG 29 1” & 1-1/4” NPT PG 36 1-1/2” NPT PG 42 PG 48 -

Dimensions and specifications may be changed without prior notice.

Fits Metric Thread

M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

Dimensions in Inches (mm) D1

Diameter (1)

Diameter (2)

Length

.24 (6) .26 (7.5) .37 (9.5) .45 (11.5) .53 (13.5) .69 (17.5) .94 (24) 1.22 (31) 1.46 (37) 1.69 (43)

.18 (4.5) .22 (5.5) .26 (6.5) .33 (8.5) .45 (11.5) .61 (15.5) .75 (19) .98 (25) 1.18 (30) 1.34 (34)

.59 (15) .67 (17) .75 (19) .75 (19) .77 (19.5) .93 (23.5) 1.02 (26) 1.10 (28) 1.10 (28) 1.10 (28)

Dome Plugs - Nylon Part Numbers Gray Nylon

Dome Plugs - Nickel Plated Brass Part Numbers

Dimensions in Inches (mm) H

Nickel Plated Brass

Overall Dome Thread Height Diameter Length

See page 49 for thread specs

DM-12-BK DM-16-BK DM-20-BK DM-25-BK DM-32-BK DM-40-BK DM-50-BK DM-63-BK

DM-12-GY DM-16-GY DM-20-GY DM-25-GY DM-32-GY DM-40-GY DM-50-GY DM-63-GY

.31 (8) .35 (9) .35 (9) .37 (9.5) .37 (9.5) .43 (11) .47 (12) .59 (15) .63 (16) .63 (16)

.59 (15) .24 (6) .75 (19) .24 (6) .87 (22) .24 (6) .98 (25) .24 (6) 1.06 (27) .24 (6) 1.30 (33) 31 (8) 1.73 (44) .31 (8) 2.17 (55) .39 (10) 2.44 (62) .39 (10) 2.72 (69) .47 (12)

.39 (10) .45 (11.5) .37 (9.5) .61 (15.5) .63 (16) .71 (18) .73 (18.5) .75 (19)

.59 (15) .79 (20) .98 (25) 1.18 (30) 1.50 (38) 1.81 (46) 2.20 (56) 2.72 (69)

.24 (6) .28 (7) .24 (6) .43 (11) .43 (11) .51 (13) .51 (13) .59 (15)

DP-13-BR

D H

E Thread Type

DP-16-BR DP-21-BR DP-29-BR DP-36-BR DP-42-BR DP-48-BR DM-12-BR DM-16-BR DM-20-BR DM-25-BR DM-32-BR DM-40-BR DM-50-BR DM-63-BR

Hex Plugs - Nylon Thread Type & Size

Black Nylon See page 49 for thread specs

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

Overall Dome Thread Height Diameter Length

.39 (10) .35 (9) .37 (9.5) .61 (15.5) .63 (16) .71 (18) .73 (18.5) .75 (19)

.55 (14) .67 (17) .79 (20)

.20 (5) .24 (6) .24 (6)

.87 (22) .26 (6.5) .94 (24) .26 (6.5) 1.18 (30) .28 (7) 1.54 (39) .31 (8) 1.97 (50) .35 (9) 2.24 (57) .39 (10) 2.52 (64) .39 (10) .55 (14) .71 (18) .87 (22) 1.10 (28) 1.38 (35) 1.73 (44) 2.13 (54) 2.68 (68)

.37 (9.5) .20 (5) .26 (6.5) .28 (7) .31 (8) .33 (8.5) .35 (9) .39 (10)

Hex Plugs - Nickel Plated Brass

Dimensions in Inches (mm)

Part Numbers

Overall Height

Wrench Flat

Thread Length

.59 (15) .75 (19) .94 (24) .94 (24) 1.10 (28) 1.42 (36) 1.81 (46) 2.17 (55) 2.36 (60) 2.76 (70)

.33 (8.5) .33 (8.5) .35 (9) .35 (9) .41 (10.5) .45 (11.5) .45 (11.5) .53 (13.5) .53 (13.5) .57 (14.5)

HN-38-BK HN-12-BK HN-34-BK HN-10-BK

3/8” NPT 1/2” NPT 3/4” NPT 1” NPT

.83 (21) .81 (20.5) .87 (22) .91 (23)

.75 (19) .94 (24) 1.10 (28) 1.34 (34)

.59 (15) .55 (14) .63 (16) .67 (17)

HM-12-BK HM-16-BK HM-20-BK HM-25-BK HM-32-BK HM-40-BK HM-50-BK HM-63-BK

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.51 (13) .51 (13) .57 (14.5) .63 (16) .69 (17.5) .71 (18) .79 (20) .83 (21)

.59 (15) .75 (19) .94 (24) 1.10 (28) 1.42 (36) 1.81 (46) 2.17 (55) 2.76 (70)

.33 (8.5) .33 (8.5) .35 (9) .41 (10.5) .45 (11.5) .45 (11.5) .53 (13.5) .57 (14.5)

See page 49 for thread specs

X H

Thread Type Note: HP & HM Plugs can be tightened with Hex & Allen wrenches, as well as regular screwdrivers.

Overall Height

Wrench Flat

Thread Length

.31 (8)

.55 (14)

.20 (5)

.35 (9) .67 (17) .37 (9.5) .79 (20)

.24 (6) .24 (6)

.39 (10)

.87 (22) .26 (6.5)

HP-16-BR HP-21-BR HP-29-BR HP-36-BR HP-42-BR HP-48-BR

PG 7 / 1/4”NPT PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

.39 (10) .41 (10.5) .49 (12.5) .51 (13) .59 (15) .65 (16.5)

.94 (24) .26 (6.5) 1.18 (30) .28 (7) 1.61 (41) .31 (8) 1.97 (50) .31 (8) 2.28 (58) .35 (9) 2.56 (65) .39 (10)

HM-12-BR HM-16-BR HM-20-BR HM-25-BR HM-32-BR HM-40-BR HM-50-BR HM-63-BR

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

.37 (9.5) .35 (9) .37 (9.5) .41 (10.5) .49 (12.5) .51 (13) .59 (15) .65 (16.5)

.55 (14) .26 (6.5) .75 (19) .24 (6) .87 (22) .24 (6) 1.18 (30) .28 (7) 1.61 (41) .31 (8) 1.81 (46) .31 (8) 2.17 (55) .35 (9) 2.76 (70) .39 (10)

HP-07-BR E

HP-09-BR HP-11-BR HP-13-BR

Nickel Plated Brass Hex Plug

For all Hole Plugs listed, the O-Ring is optional (see page 30) To order plug with O-Ring, add “-B” (Buna-N) or “-V” (Viton®) to part number (e.g. DP-11-BR-B, HP-11-BR-V) Viton® is a federally registered trademark of DuPont Dow Elastomer. Dimensions and specifications may be changed without prior notice.

X H

E Thread Type

For Material Specifications ations please refer to page 45 45.

Other Products / Index

.51 (13) .51 (13) .57 (14.5) .57 (14.5) .63 (16) .69 (17.5) .71 (18) .79 (20) .79 (20) .83 (21)

Nylon Hex Plug

Technical Information

PG 7 / 1/4” NPT PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

Nickel Plated Brass

Dimensions in Inches (mm)

Conduit System

HP-07-BK HP-09-BK HP-11-BK HP-13-BK HP-16-BK HP-21-BK HP-29-BK HP-36-BK HP-42-BK HP-48-BK

Thread Type & Size

Adapter,Reducer,Enlarger

Part Numbers

PG 7 .31 (8) PG 9 .35 (9) PG 11 .35 (9) PG 13 / .37 (9.5) 13.5 PG 16 .35 (9) PG 21 .43 (11) PG 29 .47 (12) PG 36 .59 (15) PG 42 .63 (16) PG 48 .63 (16)

DP-07-BR DP-09-BR DP-11-BR

Nylon & Nickel Plated Brass Dome Plug

Accessories

DP 07 GY DP-07-GY PG 7 DP-09-GY PG 9 DP-11-GY PG 11 DP-13-GY PG 13 / 13.5 DP-16-GY PG 16 DP-21-GY PG 21 DP-29-GY PG 29 DP-36-GY PG 36 DP-42-GY PG 42 DP-48-GY PG 48

See page 49 for thread specs

Dimensions in Inches (mm)

PVDF / Steel

DP-07-BK DP-09-BK DP-11-BK DP-13-BK DP-16-BK DP-21-BK DP-29-BK DP-36-BK DP-42-BK DP-48-BK

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

Thread Type & Size

Nickel Plated Brass

Black Nylon

Thread Type & Size

Nylon Strain Relief

Accessories for Strain Relief Fittings Hole Plugs (Dome & Hex) - PG/NPT/Metric Threads

Nylon Strain Relief

Accessories for Strain Relief Fittings Hex Plugs - Stainless Steel - PG/NPT/Metric Threads These Plugs are designed to fit and seal European PG per DIN 46320-FS/PA and DIN 46320/Ms and Metric threads.

Nickel Plated Brass

They are made of Stainless Steel and are available with Buna-N, Viton® or Silicone O-Ring.

Thread Type

Also available in Nylon or Nickel Plated Brass. (See page 31)

Part Numbers w/ Buna-N O-Ring

w/ Viton O-Ring ®

w/ Silicone O-Ring

Thread Type & Size

Adapter,Reducer,Enlarger

Accessories

PVDF / Steel

See page 49 for thread specs

Dimensions in Inches (mm) H

Overall Height

Wrench Flat

Thread Length

HP-07-SS-B HP-09-SS-B HP-11-SS-B HP-13-SS-B HP-16-SS-B HP-21-SS-B HP-29-SS-B HP-36-SS-B

HP-07-SS-V HP-09-SS-V HP-11-SS-V HP-13-SS-V HP-16-SS-V HP-21-SS-V HP-29-SS-V HP-36-SS-V

HP-07-SS-S HP-09-SS-S HP-11-SS-S HP-13-SS-S HP-16-SS-S HP-21-SS-S HP-29-SS-S HP-36-SS-S

PG 7 / 1/4”NPT PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36

.31 (8) .35 (9) .37 (9.5) .39 (10) .39 (10) .41 (10.5) .49 (12.5) .51 (13)

.55 (14) .67 (17) .79 (20) .87 (22) .94 (24) 1.18 (30) 1.61 (41) 1.97 (50)

.20 (5) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .31 (8) .31 (8)

HM-12-SS-B HM-16-SS-B HM-20-SS-B HM-25-SS-B HM-32-SS-B HM-40-SS-B

HM-12-SS-V HM-16-SS-V HM-20-SS-V HM-25-SS-V HM-32-SS-V HM-40-SS-V

HM-12-SS-S HM-16-SS-S HM-20-SS-S HM-25-SS-S HM-32-SS-S HM-40-SS-S

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5

.37 (9.5) .35 (9) .37 (9.5) .41 (10.5) .49 (12.5) .51 (13)

.55 (14) .75 (19) .87 (22) 1.18 (30) 1.61 (41) 1.81 (46)

.26 (6.5) .24 (6) .24 (6) .28 (7) .31 (8) .31 (8)

Viton® is a federally registered trademark of DuPont Dow Elastomer.

Accessories for Strain Relief Fittings Clamp - fit PG/NPT & Male Metric Threads Part Numbers

Conduit System

Nickel Plated Brass

This clamp offers extra pull-out resistance. Made of durable Nickel Plated Brass, it offers an excellent solution for your specific application needs.

Other Products / Index

H T

Thread Type

Cable Range

Thread Type & Size (Male)

KL16AA-BR KL21AA-BR KL29AA-BR KL36AA-BR KL42AA-BR KL48AA-BR

PG 7 PG 9 PG 11 13 / .33 - .55 (8.5 - 14) PG 13.5 .37 - .63 (9.5 - 16) PG 16 .47 - .83 (12 - 21) PG 21 .75 - 1.18 (19 - 30) PG 29 .98 - 1.46 (25 - 37) PG 36 1.22 - 1.69 (31 - 43) PG 42 1.38 - 1.89 (35 - 48) PG 48

KL12MA-BR KL16MA-BR KL20MA-BR KL25MA-BR KL32MA-BR KL40MA-BR KL50MA-BR

.20 - .30 (5-7.5) .28 - .39 (7-10) .39 - .55 (10-14) .47 - .85 (12-21.5) .63 - 1.06 (16-27) .87 - 1.30 (22-33) .98 - 1.52 (25-38.5)

KL07AA-BR KL09AA-BR KL11AA-BR KL13AA-BR

Technical Information

.22 - .31 (5.5 - 8) .26 - .39 (6.5 - 10) .30 - .47 (7.5 - 12)

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

Dimensions in Inches (mm) A

Hole O.D.

Body Length

Thread Length

Wrench Flat

.49 (12.5) .60 (15.2) .73 (18.5)

.58 (14.8) .65 (16.6) .68 (17.3)

.22 (5.5) .24 (6) .24 (6)

.63 (16) .75 (19) .87 (22)

.80 (20.3)

.70 (17.8)

.26 (6.5)

.94 (24)

.88 (22.3) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 2.13 (54.1) 2.34 (59.4)

.72 (18.3) .82 (20.8) .86 (21.8) 1.00 (25.3) 1.04 (26.3) 1.07 (27.3)

.26 (6.5) .30 (7.5) .31 (8) .37 (9.5) .39 (10) .43 (11)

1.02 (26) 1.30 (33) 1.65 (42) 2.05 (52) 2.32 (59) 2.32 (59)

.47 (12) .63 (16) .79 (20) .98 (25) 1.26 (32) 1.57 (40) 1.97 (50)

.59 (15) .63 (16) .71 (18) .83 (21) .87 (22) 1.00 (25.5) 1.00 (25.5)

.22 (5.5) .24 (6) .26 (6.5) .31 (8) .31 (8) .37 (9.5) .37 (9.5)

.63 (16) .75 (19) .94 (24) 1.34 (34) 1.65 (42) 2.05 (52) 2.05 (52)

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Part Numbers

Used with Sizes

Nylon Strain Relief

Accessories for Strain Relief Fittings Socket & Ratchet Wrenches Dimensions in Inches (mm) (Applies to Socket Wrench only) Socket Wrench

Brass Dome Nut

See page 49 for thread specs

PG7, M12 PG7, M12

PG 29, 1” NPT, M32

PG 36, M40 PG 36, 1-1/2” NPT, M40 PG 42, M50 PG 42, M50

M63

Part Numbers Ratchet Head & Handle

Wrench Flat

Length

Inner Diameter

Outer Diameter

.55 (14) .59 (15) .67 (17) .75 (19) .79 (20) .87 (22) .94 (24) 1.06 (27) 1.18 (30) 1.30 (33) 1.42 (36) 1.57 (40) 1.61 (41) 1.65 (42) 1.81 (46) 1.97 (50) 2.09 (53) 2.17 (55) 2.24 (57) 2.36 (60) 2.52 (64) 2.56 (65) 2.68 (68)

2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 2.36 (60) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100) 3.94 (100)

.35 (9) .37 (9.5) .39 (10) .43 (11) .47 (12) .51 (13) .59 (15) .67 (17) .71 (18) .79 (20) .87 (22) .98 (25) 1.06 (27) 1.06 (27) 1.22 (31) 1.26 (32) 1.26 (32) 1.26 (32) 1.42 (36) 1.50 (38) 1.57 (40) 1.65 (42) 1.65 (42)

.75 (19) .79 (20) .93 (23.5) 1.02 (26) 1.06 (27) 1.16 (29.5) 1.28 (32.5) 1.40 (35.5) 1.59 (40.5) 1.71 (43.5) 1.87 (47.5) 2.07 (52.5) 2.11 (53.5) 2.15 (54.5) 2.36 (60) 2.58 (65.5) 1.5) 2.82 (71.5) 72) 2.83 (72) 5) 2.97 (75.5) 3.09 (78.5)) 3.31 (84) 3.35 (85) 3.43 (87)

Used with Sizes

Sockets for Ratchet Wrench

Brass Dome Nut

See page 49 for thread specs

(R. Head) R-0100* (Handle) R-0200* PG7, M12 PG7, M12 PG 9, 3/8” NPT, M16 3/8” NPT, M16 PG 11, M16-E PG 11, 3/8” NPT, M16-E PG 13 / 13.5, 1/2” NPT, M20 PG 13 / 13.5, 1/2” NPT, M20 PG 16, 1/2” NPT-E, M20-E PG 16, 1/2” NPT-E, M20-E PG 21, 3/4” NPT, M25

from alloy steel. It is slit open along the full length to accommodate the installed cable during tightening of the dome nut. The wrench encloses the dome nut on five sides, giving the nut additional rigidity during tightening. This is especially important if a stiff cable is used. Does not work with all Flex Fittings.

PG 9, 3/8” NPT, M16

*Note: When Ordering the Ratchet Wrench, please make sure to order all 3 components together: Ratchet Head, Handle & Socket(s).

Handle

Interchangeable Sockets in various sizes available. Ratchet Head with one-sided opening for easy access.

For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Other Products / Index

The Ratchet Wrench consists of three components: Head, Handle & Socket. It provides a quick & easy method of tightening cord grips. Only one Handle & Ratchet Head is required. Sockets are interchangeable.

Technical Information

R-1400-WR* R-1500-WR* R-1700-WR* R-1900-WR* R-2000-WR* R-2200-WR* R-2400-WR* R-2700-WR* R-3000-WR*

The handy, light weight Deep ep Socket Wrench is manufactured

Conduit System

Nylon Dome Nut

Adapter,Reducer,Enlarger Adapter,R p ,R

PG 48, M63 PG 48, M63 M63

Accessories

PG 29, 1”, 1-1/4” NPT, M32 1-1/4” NPT

PVDF / Steel

PG 9, 3/8” NPT, M16 3/8” NPT, M16 PG 11, M16-E PG 11, 3/8” NPT, M16-E PG 13 / 13.5, 1/2” NPT, M20 PG 13 / 13.5, 1/2” NPT, M20 PG 16, 1/2” NPT-E, M20-E PG 16, 1/2” NPT-E, M20-E PG 21, 3/4” NPT, M25 PG 21, 3/4” NPT, M25 PG 9, 3/8” NPT, M16

Nickel Plated Brass

S-1400-WR S-1500-WR S-1700-WR S-1900-WR S-2000-WR S-2200-WR S-2400-WR S-2700-WR S-3000-WR S-3300-WR S-3600-WR S-4000-WR S-4100-WR S-4200-WR S-4600-WR S-5000-WR S-5300-WR S-5500-WR S-5700-WR S-6000-WR S-6400-WR S-6500-WR S-6800-WR

Nylon Dome Nut

Nylon Strain Relief

Adapters, Reducers & Enlargers Adapters - Nickel Plated Brass Dealing with foreign products? Is connecting a challenge? Well, look no further!

Adapters - PG to NPT Threads Part Numbers

Nickel Plated Brass

Nickel Plated Brass w/ Buna-N O-Ring

Aluminum

AG-0912-BR* AG-1112-BR

AG-0912-AL* -

AG-1312-BR

AG-1612-BR AG-2112-BR AG-2134-BR AG-2910-BR

T A (AG-xxxx-BR & AM-xxxx-BR)

PVDF / Steel Accessories Adapter,Reducer,Enlarger

Female Thread B

Wrench Flat

Thread Length

Height

PG 9 PG 11 PG 13 / 13.5 PG 16 PG 21 PG 21 PG 29

1/2” NPT 1/2” NPT

.94 (24) .94 (24)

.24 (6) .94 (24) .24 (6) .89 (22.7)

1/2” NPT

.94 (24)

.26 (6.5) .93 (23.5)

1/2” NPT .94 (24) .26 (6.5) 1/2” NPT 1.18 (30) .28 (7) 3/4” NPT 1.18 (30) .28 (7) 1” NPT 1.57 (40) .31 (8)

.91 (23) .59 (15) .94 (24) .79 (20)

More custom parts available online at www.sealconusa.com or upon request!

Adapters - NPT to PG Threads* Part Numbers

AN AN-1407-BR 1407 BR AN-1209-BR AN-1211-BR

Threads

Dimensions in Inches (mm)

AP-1320-BR

Wrench Flat

Thread Length

Height

AP-1625-BR

.75 (19) .98 (25) .98 (25)

.59 (15) .98 (25) .79 (20) 1.18 (30) .79 (20) 1.18 (30)

PG 7 PG 9 PG 11 PG 13 / 13.5 PG 21 PG 21 PG 29

.98 (25)

.79 (20) 1.18 (30)

1.30 (33) 1.30 (33) 1.61 (41)

.79 (20) 1.26 (32) .67 (17) 1.22 (31) .98 (25) 1.57 (40)

PG 29

1.69 (43)

.94 (24) 1.34 (34)

1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT

Adapters - NPT to Metric Threads* Part Numbers

Threads Male Thread A

AT-1216-BR AT-1220-BR AT-1225-BR AT-3425-BR AT-1032-BR AT-5432-BR

Dimensions in Inches (mm)

Female Thread B

1/2” NPT 1/2” NPT 1/2” NPT 3/4” NPT 1” NPT

M16 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 1-1/4” NPT M32 x 1.5

Wrench Flat .98 (25) .98 (25) 1.26 (32) 1.24 (31.6) 1.50 (38) 1.67 (42.5)

Thread Length .79 (20) .79 (20) .79 (20) .75 (19) .98 (25) .59 (15)

Height

1.18 (30) 1.18 (30) 1.18 (30) 1.18 (30) 1.61 (41) 1.30 (33) W

H T

(AN-xxxx-BR)

AP-0916-BR AP-1120-BR

1/4” NPT 1/2” NPT 1/2” NPT

AN-1221-BR AN-3421-BR AN-1029-BR

Part Numbers

Female Thread B

1/2” NPT

Adapters - PG to Metric Threads*

Male Thread A

AN-1213-BR

AN-5429-BR Conduit System

Male Thread A

A (AF-xxxx-BR, AP-xxxx-BR & AG-xxxx-AL)

Technical Information

Dimensions in Inches (mm)

X B

Other Products / Index

Threads

Dimensions in Inches (mm)

Male Thread A

Female Thread B

Outer Diameter

Thread Length

Height

PG 9 PG 11 PG 13/13.5 PG 16

M16 x 1.5 M20 x 1.5

.79 (20) .87 (22)

.24 (6) .65 (16.5) .26 (6.5) .75 (19)

M20 x 1.5

.87 (22)

.26 (6.5) .75 (19)

M25 x 1.5 1.06 (27) .26 (6.5) .83 (21)

Adapters - Metric to PG Threads* Part Numbers

AF-1609-BR AF-2011-BR

Threads Male Thread A

Female Thread B

M16 x 1.5 M20 x 1.5

PG 9 PG 11 PG 13 / 13.5 PG 16 PG 16 PG 21 PG 29

AF-2013-BR

M20 x 1.5

AF-2016-BR AF-2516-BR AF-2521-BR AF-3229-BR

M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5

Dimensions in Inches (mm) X

Outer Diameter

Thread Length

Height

.79 (20) .87 (22)

.24 (6) .65 (16.5) .26 (6.5) .75 (19)

.87 (22)

.26 (6.5) .75 (19)

.94 (24) .26 (6.5) .75 (19) 1.10 (28) .26 (6.5) .75 (19) 1.18 (30) .26 (6.5) .83 (21) 1.54 (39) .28 (7) .91 (23)

Adapters - Metric to NPT Threads Part Numbers Nickel Plated Brass w/ Buna-N O-Ring

AM-1612-BR AM-2012-BR AM-2512-BR AM-2534-BR AM-3210-BR AM-3254-BR

Threads Male Thread A

Dimensions in Inches (mm)

Female Thread B

M16 x 1.5 1/2” NPT M20 x 1.5 1/2” NPT M25 x 1.5 1/2” NPT M25 x 1.5 3/4” NPT M32 x 1.5 1” NPT M32 x 1.5 1-1/4” NPT

Wrench Flat

Thread Length

Height

.94 (24) .94 (24) 1.18 (30) 1.18 (30) 1.57 (40) 1.81 (46)

.24 (6) .24 (6) .28 (7) .28 (7) .31 (8) .31 (8)

.91 (23) .91 (23) .59 (15) 1.07 (26) 1.30 (33) 1.30 (33)

(AT-xxxx-BR)

*Note: O-Ring not Included See page 49 for thread specifications. Dimensions and specifications may be changed without prior notice.

Adapters - Metric to PG Threads Part Numbers B

Type A

T D A

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5 M63 x 1.5

PG 7 PG 9 PG 13 PG 13 / 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48

Dimensions in Inches (mm) H

Height

A C A B A A A A C C

Thread Length .31 (8) .59 (15) .31 (8) .31 (8) .31 (8) .39 (10) .39 (10) .47 (12) .59 (15) .59 (15)

Inner Diameter .26 (6.5) .33 (8.5) .55 (14) .71 (18) .71 (18) .98 (25) 1.30 (33) 1.69 (43) 2.05 (52) 2.01 (51)

Wrench Flat .67 (17) N/A .98 (25) 1.14 (29) 1.14 (29) 1.43 (36) 1.77 (45) 2.17 (55) N/A N/A

.79 (20) 1.34 (34) .83 (21) .55 (14) .87 (22) .98 (25) .98 (25) 1.14 (29) .79 (20) 1.38 (35)

Adapters - PG to Metric Threads Part Numbers

H T

D A

PG 7 PG 9 PG 9 PG 11 PG 11 PG 13 / 13.5 PG 13 PG 16 PG 16 PG 21 PG 21 PG 29 PG 29 PG 36 PG 36 PG 42 PG 42 PG 48 PG 48

M12 x 1.5 M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 M40 x 1.5 M50 x 1.5 M50 x 1.5 M63 x 1.5

Adapter Type

Dimensions in Inches (mm) H

Height

C C A C C B A A A C A C A C C C C C C

Thread Length .59 (15) .59 (15) .31 (8) .59 (15) .59 (15) .31 (8) .31 (8) .31 (8) .31 (8) .59 (15) .31 (8) .59 (15) .39 (10) .59 (15) .59 (15) .59 (15) .59 (15) .59 (15) .59 (15)

Inner Diameter .24 (6) .33 (8.5) .35 (9) .45 (11.5) .45 (11.5) .55 (14) .55 (14) .63 (16) .63 (16) .81 (20.5) .83 (21) 1.10 (28) 1.18 (30) 1.50 (38) 1.46 (37) 1.50 (38) 1.69 (43) 1.50 (38) 1.89 (48)

Wrench Flat N/A N/A .83 (21) N/A N/A .98 (25) .98 (25) 1.06 (27) 1.18 (30) N/A 1.46 (37) N/A 1.77 (45) N/A N/A N/A N/A N/A N/A

1.34 (34) 1.34 (34) .79 (20) 1.34 (34) 1.34 (34) .55 (14) .83 (21) .83 (21) .91 (23) 1.34 (34) .91 (23) 1.34 (34) 1.06 (27) .79 (20) 1.36 (34.5) .79 (20) 1.36 (34.5) .79 (20) 1.38 (35)

Adapters - PG to NPT Threads Part Numbers H

AG-1112-BK AG-1312-BK

D A

Male Thread A

Female Thread B

PG 11 PG 13 / 13.5

1/2” NPT 1/2” NPT

Adapter Type

Dimensions in Inches (mm) T

Height

D D

Thread Length .28 (7) .35 (9)

Inner Diameter N/A N/A

Wrench Flat .94 (24) .94 (24)

.83 (21) .91 (23)

Adapters - Metric to NPT Threads Part Numbers

AM-1612-BK BK AM-2012-BK

Female Thread B

M16 x 1.5 M20 x 1.5

1/2” NPT 1/2” NPT

Adapter Type

Dimensions in Inches (mm) H

Height

E E

Thread Length .28 (7) .28 (7)

Inner Diameter N/A N/A

Wrench Flat 1.02 (26) 1.02 (26)

1.10 (28) 1.06 (27)

*Note: UL F1 rating applies to Black Nylon Fittings only. D A

See page 49 for thread specifications. Dimensions and specifications may be changed without prior notice.

Other Products / Index

T Type E

Threads Male Thread A

Technical Information

Threads

Conduit System

Female Thread B

Adapter,Reducer,Enlarger

Type C

AP-0712-BK AP-0912-BK AP-0916-BK AP-1116-BK AP-1120-BK AP-1316-BK AP-1320-BK AP-1620-BK AP-1625-BK AP-2125-BK AP-2132-BK AP-2932-BK AP-2940-BK AP-3640-BK AP-3650-BK AP-4240-BK AP-4250-BK AP-4850-BK AP-4863-BK

Threads Male Thread A

Accessories

D A

Type D

Adapter Type

PVDF / Steel

Type B

AF-1207-BK AF-1609-BK AF-2013-BK AF-2513-BK AF-2516-BK AF-3221-BK AF-4029-BK AF-5036-BK AF-6342-BK AF-6348-BK

Female Thread B

Nickel Plated Brass

Threads Male Thread A

Nylon Strain Relief

Adapters, Reducers & Enlargers Adapters - Black Nylon

Nylon Strain Relief Nickel Plated Brass PVDF / Steel Accessories

Adapters, Reducers & Enlargers Reducers (Hex & Round) - Nickel Plated Brass Is your thread size off by one size? These Reducers will solve that threading problem. They convert holes which fit PG, NPT or Metric threads to a smaller female thread of the same thread type. Reducers - Metric to Metric Threads* Part Numbers

RR-1612-BR RR-2012-BR RR-2016-BR RR-2516-BR RR-2520-BR RR-3220-BR RR-3225-BR RR-4025-BR RR-4032-BR RR-5032-BR RR-5040-BR RR-6340-BR RR-6350-BR

Threads Female Thread B

M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 M50 x 1.5 M63 x 1.5 M63 x 1.5

M12 x 1.5 M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5

Adapter,Reducer,Enlarger Conduit System Technical Information

Outer Diameter

Thread Length

Height

RQ-1309-BR

RP-1309-BR

.71 (18) .94 (24) .94 (24) 1.18 (30) 1.18 (30) 1.54 (39) 1.54 (39) 1.69 (43) 1.69 (43) 2.24 (57) 2.24 (57) 2.52 (64) 2.52 (64)

.24 (6) .26 (6.5) .26 (6.5) .28 (7) .28 (7) .31 (8) .31 (8) .31 (8) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10)

.33 (8.5) .35 (9) .35 (9) .39 (10) .39 (10) .45 (11.5) .45 (11.5) .45 (11.5) .49 (12.5) .55 (14) .55 (14) .55 (14) .55 (14)

RQ-1311-BR

RP-1311-BR

RQ-1609-BR RQ-1611-BR

RP-1609-BR RP-1611-BR

RQ-1613-BR

RP-1613-BR

PG 16

RQ-2111-BR

RP-2111-BR

PG 21

RQ-2113-BR

RP-2113-BR

PG 21

RQ-2116-BR RQ-2916-BR RQ-2921-BR RQ-3621-BR RQ-3629-BR RQ-4229-BR RQ-4236-BR RQ-4836-BR RQ-4842-BR

RP-2116-BR RP-2916-BR RP-2921-BR RP-3621-BR RP-3629-BR RP-4229-BR RP-4236-BR RP-4836-BR RP-4842-BR

PG 21 PG 29 PG 29 PG 36 PG 36 PG 42 PG 42 PG 48 PG 48

RR-0907-BR RR-1107-BR RR-1109-BR RR-1309-BR RR-1311-BR RR-1609-BR RR-1611-BR

Dimensions in Inches (mm)

Male Thread A

Female Thread B

PG 9 PG 11 PG 11 PG 13 / 13.5 PG 13 / 13.5 PG 16 PG 16

RR-1613-BR

PG 16

RR-2111-BR

PG 21

RR-2113-BR

PG 21

RR-2116-BR RR-2916-BR RR-2921-BR RR-3621-BR RR-3629-BR RR-4229-BR RR-4236-BR RR-4836-BR RR-4842-BR

PG 21 PG 29 PG 29 PG 36 PG 36 PG 42 PG 42 PG 48 PG 48

PG 7 PG 7 PG 9

Thread Height Length .24 (6) .33 (8.5) .24 (6) .33 (8.5) .24 (6) .33 (8.5)

PG 9

.87 (22)

.26 (6.5) .35 (9)

PG 11

.87 (22)

.26 (6.5) .35 (9)

PG 9 PG 11 PG 13 / 13.5 PG 11 PG 13 / 13.5 PG 16 PG 16 PG 21 PG 21 PG 29 PG 29 PG 36 PG 36 PG 42

.94 (24) .94 (24)

.26 (6.5) .37 (9.5) .26 (6.5) .37 (9.5)

.94 (24)

.26 (6.5) .37 (9.5)

1.18 (30)

.28 (7)

.39 (10)

1.18 (30)

.28 (7)

.39 (10)

1.18 (30) 1.54 (39) 1.54 (39) 1.97 (50) 1.97 (50) 2.24 (57) 2.24 (57) 2.52 (64) 2.52 (64)

.28 (7) .31 (8) .31 (8) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10)

.39 (10) .45 (11.5) .45 (11.5) .49 (12.5) .49 (12.5) .55 (14) .55 (14) .55 (14) .55 (14)

Part Numbers w/ Buna-N O-Ring

RM-1612-BR RM-2012-BR RM-2016-BR RM-2516-BR RM-2520-BR RM-3216-BR RM-3220-BR RM-3225-BR RM-4020-BR RM-4025-BR RM-4032-BR RM-5025-BR RM-5032-BR RM-5040-BR RM-6332-BR RM-6340-BR RM-6350-BR

*Note: O-Ring not Included

Part Numbers

T (RR-xxxx-BR)

H (RQ-xxxx-BR, RP-xxxx-BR & RM-xxxx-BR)

Thread Length

Height

.24 (6) .24 (6) .24 (6)

.34 (8.8) .35 (9) .35 (9)

PG 7 PG 7 PG 9

.67 (17) .79 (20) .79 (20)

PG 9

.87 (22) .26 (6.5) .37 (9.5)

PG 11

.87 (22) .26 (6.5) .37 (9.5)

PG 9 PG 11 PG 13 / 13.5 PG 11 PG 13 / 13.5 PG 16 PG 16 PG 21 PG 21 PG 29 PG 29 PG 36 PG 36 PG 42

.94 (24) .26 (6.5) .37 (9.5) .94 (24) .26 (6.5) .37 (9.5) .94 (24) .26 (6.5) .37 (9.5) 1.18 (30) .28 (7) .41 (10.3) 1.18 (30) .28 (7) .41 (10.3) 1.18 (30) 1.57 (40) 1.57 (40) 1.97 (50) 1.97 (50) 2.24 (57) 2.24 (57) 2.52 (64) 2.52 (64)

Threads

.28 (7) .31 (8) .31 (8) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10)

.41 (10.3) .45 (11.5) .45 (11.5) .49 (12.5) .49 (12.5) .53 (13.5) .53 (13.5) .53 (13.5) .53 (13.5)

Dimensions in Inches (mm)

Male Thread A

Female Thread B

Wrench Flat

Thread Length

Height

M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 M50 x 1.5 M50 x 1.5 M63 x 1.5 M63 x 1.5 M63 x 1.5

M12 x 1.5 M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

.67 (17) .87 (22) .87 (22) 1.06 (27) 1.06 (27) 1.34 (34) 1.34 (34) 1.34 (34) 1.46 (43) 1.46 (43) 1.46 (43) 2.17 (55) 2.17 (55) 2.17 (55) 2.56 (65) 2.56 (65) 2.56 (65)

.20 (5) .24 (6) .24 (6) .28 (7) .28 (7) .31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .35 (9) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10)

.31 (8) .35 (9) .35 (9) .39 (10) .39 (10) .43 (11) .43 (11) .43 (11) .47 (12) .47 (12) .47 (12) .51 (13) .51 (13) .51 (13) .55 (14) .55 (14) .55 (14)

T (RN-xxxx-BR)

Threads Male Thread A

W H H

Reducers - NPT to NPT Threads*

RP-0907-BR RP-1107-BR RP-1109-BR

Dimensions in Inches (mm)

Female W Thread Wrench B Flat

Reducers - Metric to Metric Threads

Outer Diameter .67 (17) .79 (20) .79 (20)

See page 49 for thread specifications.

Threads Male Thread A PG 9 PG 11 PG 11 PG 13 / 13.5 PG 13 / 13.5 PG 16 PG 16

Reducers - PG to PG Threads* Threads

Part Numbers Buna N O-Ring O Rin without O-Ring O Ring w/ Buna-N

RQ-0907-BR RQ-1107-BR RQ-1109-BR

Dimensions in Inches (mm)

Male Thread A

Part Numbers

Other Products / Index

Reducers - PG to PG Threads

Female Thread B

Dimensions in Inches (mm) W

Wrench Thread Height Flat Length RN-3412-BR 3/4” NPT 1/2” NPT 1.18 (30) .71 (18) .87 (22) RN-1034-BR 1” NPT 3/4” NPT 1.30 (33) .98 (25) 1.14 (29) RN-5410-BR 1-1/4” NPT 1” NPT 1.69 (43) .98 (25) 1.14 (29)

Dimensions and specifications may be changed without prior notice.

Nylon Strain Relief

Adapters, Reducers & Enlargers Reducers - Black & Gray Nylon

Reducers - PG to PG Threads* Part Numbers

Threads Female Thread B

Height

B B A B A A B A A A A

Thread Length .31 (8) .31 (8) .31 (8) .35 (9) .39 (10) .39 (10) .39 (10) .43 (11) .43 (11) .43 (11) .43 (11)

Outer Diameter .75 (19) .89 (22.5) 1.06 (27) 1.0 (25.5) 1.14 (29) 1.14 (29) 1.13 (28.5) 1.42 (36) 1.42 (36) 1.81 (46) 2.28 (58)

Wrench Flat N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

.55 (14) .71 (18) .47 (12) .83 (21) .51 (13) .51 (13) .98 (25) .53 (13.5) .53 (13.5) .53 (13.5) .59 (15)

Type A D

B A

PVDF / Steel

PG 9 PG 7 PG 11 PG 9 PG 13 / 13.5 PG 9 PG 13 / 13.5 PG 11 PG 16 PG 9 PG 16 PG 11 PG 16 PG 13 / 13.5 PG 21 PG 13 / 13.5 PG 21 PG 16 PG 29 PG 21 PG 36 PG 29

0907 GY RR-0907-GY RR-1109-GY RR-1309-GY RR-1311-GY RR-1609-GY RR-1611-GY RR-1613-GY RR-2113-GY RR-2116-GY RR-2921-GY RR-3629-GY

Dimensions in Inches (mm)

Reducers - Metric to Metric Threads* Part Numbers

Threads

M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

Adapter Type

Dimensions in Inches (mm) H

Height

B B A A A A A

Thread Length .35 (9) .35 (9) .39 (10) .47 (12) .47 (12) .55 (14) .59 (15)

Outer Diameter .87 (22) 1.06 (27) 1.26 (32) 1.57 (40) 2.01 (51) 2.40 (61) 2.95 (75)

Wrench Flat .79 (20) .94 (24) 1.14 (29) 1.42 (36) 1.81 (46) 2.17 (55) 2.68 (68)

1.06 (27) 1.06 (27) .67 (17) .75 (19) .75 (19) .83 (21) .87 (22)

Type B D B

W H T A

Reducers - Metric to Metric Threads* Part Numbers

H T D A

Female Thread B

M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

Dimensions in Inches (mm) T

Height

C C C C D D D

Thread Length .31 (8) .31 (8) .31 (8) .39 (10) .59 (15) .59 (15) .59 (15)

Inner Diameter .39 (10) .53 (13.5) .71 (18) .91 (23) 1.18 (30) 1.50 (38) 1.89 (48)

Wrench Flat .79 (20) .98 (25) 1.14 (29) 1.42 (36) N/A N/A N/A

.55 (14) .55 (14) .55 (14) .63 (16) .79 (20) .79 (20) .79 (20)

Reducers - NPT to NPT Threads* B

Part Numbers

Type D

D A

*Note: O-Ring not Included See page 49 for thread specifications.

RB-3412-02 RB-3438-02 RB-1012-02 RB-1034-02 RB-1214-02 RB-1238-02

Male Thread A

Female Thread B

3/4” NPT 3/4” NPT 1” NPT 1” NPT 1/2” NPT 1/2” NPT

1/2” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1/4” NPT 3/8” NPT

*Note: UL F1 rating applies to Black Nylon Fittings only. Dimensions and specifications may be changed without prior notice.

Adapter Type

C C C C C C

Dimensions in Inches (mm) T

Thread Length .64 (16.2) .63 (15.9) .65 (16.5) .65 (16.5) .57 (14.4) .57 (14.6)

Height

Inner Diameter .70 (17.7) .70 (17.7) .91 (23.1) .92 (23.4) .56 (14.2) .56 (14.2)

.89 (22.5) .88 (22.2) .90 (22.9) .90 (22.9) .81 (20.7) .82 (20.9)

Other Products / Index

Threads

Technical Information

RM-1612-BK RM-2016-BK RM-2520-BK RM-3225-BK RM-4032-BK RM-5040-BK RM-6350-BK

Male Thread A

Adapter Type

Conduit System

T Type C

Threads

Adapter,Reducer,Enlarger

Female Thread B

Accessories

RR-1612-GY 612 GY RR-2016-GY RR-2520-GY RR-3225-GY RR-4032-GY RR-5040-GY RR-6350-GY

Male Thread A

Nickel Plated Brass

Male Thread A

Adapter Type

Nylon Strain Relief Nickel Plated Brass PVDF / Steel Accessories Adapter,Reducer,Enlarger Conduit System Technical Information Other Products / Index

Adapters, Reducers & Enlargers Reducers - Stainless Steel Reducers - Metric to Metric Threads Part Numbers without O-Ring

RM-1612-SS RM-2012-SS RM-2016-SS RM-2516-SS RM-2520-SS RM-3216-SS RM-3220-SS RM-3225-SS RM-4020-SS RM-4025-SS RM-4032-SS RM-5025-SS RM-5032-SS RM-5040-SS RM-6332-SS RM-6340-SS RM-6350-SS

Threads

Dimensions in Inches (mm)

with Buna-N O Ring O-Ring

Male Thread A

Female Thread B

Wrench Flat

Thread Length

Height

RM-1612-SS-B RM-2012-SS-B RM-2016-SS-B RM-2516-SS-B RM-2520-SS-B RM-3216-SS-B RM-3220-SS-B RM-3225-SS-B RM-4020-SS-B RM-4025-SS-B RM-4032-SS-B RM-5025-SS-B RM-5032-SS-B RM-5040-SS-B RM-6332-SS-B RM-6340-SS-B RM-6350-SS-B

M16 x 1.5 M20 x 1.5 M20 x 1.5 M25 x 1.5 M25 x 1.5 M32 x 1.5 M32 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M40 x 1.5 M50 x 1.5 M50 x 1.5 M50 x 1.5 M63 x 1.5 M63 x 1.5 M63 x 1.5

M12 x 1.5 M12 x 1.5 M16 x 1.5 M16 x 1.5 M20 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

.67 (17) .87 (22) .87 (22) 1.06 (27) 1.06 (27) 1.34 (34) 1.34 (34) 1.34 (34) 1.46 (43) 1.46 (43) 1.46 (43) 2.17 (55) 2.17 (55) 2.17 (55) 2.56 (65) 2.56 (65) 2.56 (65)

.20 (5) .24 (6) .24 (6) .28 (7) .28 (7) .31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .35 (9) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10)

.35 (9) .37 (9.5) .37 (9.5) .41 (10.5) .41 (10.5) .49 (12.5) .49 (12.5) .49 (12.5) .51 (13) .51 (13) .51 (13) .59 (15) .59 (15) .59 (15) .65 (16.5) .65 (16.5) .65 (16.5)

The 316 material is much harder and ideal for direct exposure to salt water and chemical solutions in marine, off-shore, pharmaceutical, etc. This special Stainless Steel Reducers are produced upon request only. Please allow for longer delivery times.

Adapter, Reducer & Enlarger Applications: • International machine builder & equipment • Import / Export oriented projects • Adapting to domestic markets Reducers - PG to PG Threads Part Numbers without O-Ring

RP-0907-SS RP-1107-SS RP-1109-SS RP-1309-SS RP-1311-SS RP-1609-SS RP-1611-SS RP-1613-SS RP-2111-SS RP-2113-SS RP-2116-SS RP-2916-SS RP-2921-SS RP-3621-SS RP-3629-SS RP-4229-SS RP-4236-SS RP-4836-SS RP-4842-SS

with Buna-N O Ring O-Ring

RQ-0907-SS RQ-1107-SS RQ-1109-SS RQ-1309-SS RQ-1311-SS RQ-1609-SS RQ-1611-SS RQ-1613-SS RQ-2111-SS RQ-2113-SS RQ-2116-SS RQ-2916-SS RQ-2921-SS RQ-3621-SS RQ-3629-SS RQ-4229-SS RQ-4236-SS RQ-4836-SS RQ-4842-SS

Threads Male Thread A

Female Thread B

PG 9 PG 7 PG 11 PG 7 PG 11 PG 9 PG 13 / 13.5 PG 9 PG 13 / 13.5 PG 11 PG 16 PG 9 PG 16 PG 11 PG 16 PG 13 / 13.5 PG 21 PG 11 PG 21 PG 13 / 13.5 PG 21 PG 16 PG 29 PG 16 PG 29 PG 21 PG 36 PG 21 PG 36 PG 29 PG 42 PG 29 PG 42 PG 36 PG 48 PG 36 PG 48 PG 42

Dimensions in Inches (mm) W

Wrench Flat

Thread Length

Height

.67 (17) .87 (22) .87 (22) .87 (22) .87 (22) .94 (24) .94 (24) .94 (24) 1.18 (30) 1.18 (30) 1.18 (30) 1.57 (40) 1.57 (40) 1.97 (50) 1.97 (50) 2.24 (57) 2.24 (57) 2.52 (64) 2.52 (64)

.24 (6) .24 (6) .24 (6) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5) .28 (7) .28 (7) .28 (7) .31 (8) .31 (8) .35 (9) .35 (9) .39 (10) .39 (10) .39 (10) .39 (10)

.34 (8.8) .35 (9) .35 (9) .37 (9.5) .37 (9.5) .37 (9.5) .37 (9.5) .37 (9.5) .41 (10.3) .41 (10.3) .41 (10.3) .45 (11.5) .45 (11.5) .49 (12.5) .49 (12.5) .53 (13.5) .53 (13.5) .53 (13.5) .53 (13.5)

Buna-N O-Rings can be substituted with Silicone or Viton® O-Rings (see page 30). To order, add “-S” (Silicone) or “-V” (Viton®) to part number (e.g. RM-1612-SS-V) Viton® is a federally registered trademark of DuPont Dow Elastomer.

For inquiries - Please call our Inside Technical Sales Department (800-456-9012 or 303-699-1135). More custom parts available online at www.sealconusa.com or upon request! See page 49 for thread specifications.

Dimensions and specifications may be changed without prior notice.

Nylon Strain Relief

Adapters, Reducers & Enlargers Enlargers - Nylon & Nickel Plated Brass Enlargers - Metric to Metric Threads* Part Numbers

EM-1216-BK EM-1620-BK EM-2025-BK EM-2532-BK EM-3240-BK EM-4050-BK EM-5063-BK

Female Thread B

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

Adapter Type

Dimensions in Inches (mm) T

Thread Height Inner Wrench Length Diameter Flat .31 (8) .79 (20) .26 (6.5) .83 (21) .31 (8) .83 (21) .35 (9) .98 (25) .31 (8) .91 (23) .55 (14) 1.18 (30) .59 (15) 1.18 (30) .65 (16.5) N/A .59 (15) 1.36 (34.5) .91 (23) N/A .59 (15) 1.36 (34.5) 1.18 (30) N/A .59 (15) 1.38 (35) 1.54 (39) N/A

A A A C C C C

Nickel Plated Brass

Type A

Threads Male Thread A

Type C B

Enlargers - PG to PG Threads* Part Numbers mb

Threads

H Height .59 (15) .65 (16.5)

.87 (22)

.24 (6)

.69 (17.5)

.87 (22)

.24 (6)

.69 (17.5)

.94 (24) 1.18 (30)

.24 (6) .24 (6)

.73 (18.5) .81 (20.5)

PG 16

.94 (24)

.26 (6.5)

.75 (19)

PG 21

1.18 (30)

.26 (6.5)

.83 (21)

PG 21 PG 29 PG 29 PG 36 PG 42 PG 48

1.18 (30) 1.54 (39) 1.54 (39) 1.97 (50) 2.24 (57) 2.52 (64)

.26 (6.5) .26 (6.5) .28 (7) .31 (8) .35 (9) .39 (10)

.83 (21) .88 (22.5) .91 (23) 1.08 (27.5) 1.22 (31) 1.30 (33)

EP-0709-BR P-0709 EP-0911-BR

PG 7 PG 9

EP-0913-BR

PG 9

EP-1113-BR

PG 11

EP-1116-BR EP-1121-BR

PG 11 PG 11 PG 13 / 13.5 PG 13 / 13.5 PG 16 PG 16 PG 21 PG 29 PG 36 PG 42

PG 9 PG 11 PG 13 / 13.5 PG 13 / 13.5 PG 16 PG 21

EP-1321-BR EP-1621-BR EP-1629-BR EP-2129-BR EP-2936-BR EP-3642-BR EP-4248-BR

D A

Is your thread size off by one size? These Enlargers will solve that threading problem. They convert holes which fit PG, NPT or Metric threads to a larger female thread of the same thread type.

Enlargers - Metric to Metric Threads* Part Numbers mb

Female Thread B

M12 x 1.5 M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5

M16 x 1.5 M20 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M63 x 1.5

Outer Diameter .71 (18) .87 (22) 1.06 (27) 1.34 (34) 1.65 (42) 2.09 (53) 2.60 (66)

Thread Length .20 (5) .24 (6) .26 (6.5) .26 (6.5) .28 (7) .35 (9) .35 (9)

Height .59 (15) .69 (17.5) .75 (19) .83 (21) .91 (23) 1.22 (31) 1.22 (31)

More custom parts available online at www.sealconusa.com or upon request!

Enlargers - NPT to NPT Threads* Part Numbers rs

Threads Male Thread A

*Note: O-Ring not Included See page 49 for thread specifications.

1/2” NPT 3/4” NPT 1/2” NPT 1” NPT 3/4” NPT 1” NPT 1” NPT 1-1/4” NPT 3/8” NPT 1/2” NPT 3/8” NPT 1/2” NPT

Dimensions in Inches (mm) D

Outer Diameter 1.10 (28) 1.36 (34.5) 1.38 (35) 1.73 (44) 1.10 (28) 1.10 (.28)

Thread Length .79 (20) .79 (20) .71 (18) .94 (24) .59 (15) .59 (15)

Height

Dimensions and specifications may be changed without prior notice.

1.50 (38) 1.75 (44.5) 1.69 (43) 1.97 (50) 1.50 (38) 1.26 (32)

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Other Products / Index

EN-1234-BR EN-1234 EN-1210-BR EN-3410-BR EN-1054-BR EN-3812-BR EN-3812-BR

Female Thread B

Technical Information

EM-1216-BR M-121 EM-1620-BR EM-2025-BR EM-2532-BR EM-3240-BR EM-4050-BR EM-5063-BR

Male Thread A

Dimensions in Inches (mm) Conduit System

D B

Threads

Adapter,Reducer,Enlarger

T Thread Length .20 (5) .24 (6)

Female Thread B

Accessories

D Outer Diameter .67 (17) .79 (20)

Male Thread A

EP-1316-BR

Dimensions in Inches (mm)

PVDF / Steel

D A

Nylon Strain Relief Nickel Plated Brass PVDF / Steel

Conduit System Introduction Electrical Conduit provides protection to enclosed single or multi-conductors from impact, moisture, and chemical vapors. Varying quantities, sizes, and types of conductors can be pulled into a Conduit, which simplifies design and construction compared to multiple runs of cables or the expense of customized composite cables. Conduit Systems can be made waterproof. Cable connections between fixed and moving parts are weak spots in machine & system installations. When cables are bent, individual tensioned conductors have no room for flexing. They are subjected to high and variable tension forces, particularly multi-conductor cables. To prevent conductor breakages, the use of Conduit tubing is recommended. commended. Advantages: • Individual conductors are given sufficientt flexibility. This prevents tension stress. • Connections provide security against penetration of fluids.

Accessories

The above approvals apply to standard conduit only. Super Flex conduit has CE approval only.

Adapter,Reducer,Enlarger

Operating Temperatures

This STANDARD Corrugated Conduit has a UL HB Flammability Rating. The Conduit is suitable for static and moderate dynamic installations. The SUPER-FLEX Conduit is made of a special plastic blend. Due to its higher flexibility, it is an ideal solution for drag chain and robotics applications. Sizes 8 & 14 are not available vailable in this material.

Push-In Fittings

- 20ºC to 80ºC (- 4ºF to 176ºF)

Tu Turn-to-Seal Fittings

- 40ºC to 110ºC (- 40ºF to 230ºF)

Sn Snapclic DUO Nylon

- 40ºC to 100ºC (- 40ºF to 212ºF)

Sn Snapclic DUO Brass

- 40ºC to 100ºC (- 40ºF to 212ºF)

Do Double-Seal Fittings

- 40ºC to 110ºC (- 40ºF to 230ºF)

Fl Flange/Bulkhead Fittings

- 20ºC to 80ºC (- 4ºF to 176ºF)

St Standard Conduit

- 40ºC to 110ºC (- 40ºF to 230ºF)

Su Super-Flex Conduit

- 50ºC to 160ºC (- 58ºF to 320ºF)

C d i S Conduit System Sys Corrugated Conduit (Standard & Super Flex)

Conduit System Corrugated Conduit Part Numbers Standard Modified Polyamide PA 6

SuperFlex Thermoplastic Elastomer

SM-0811-BK SM-1013-BK 16-BK SM-1216-BK SM-1419-BK SM-1721-BK SM-2328-BK SM-2934-BK SM-3642-BK SM-4854-BK

SM-1013-HY SM-1216-HY SM-1721-HY SM-2328-HY SM SM-2934-HY SMSM-3642-HY SM-48 SM-4854-HY

Nominal Conduit Size

Roll Length (feet)

8 10 12 14 17 23 29 37 50

164 164 164 164 164 164 82 82 82

Dimensions

Fits Turn-to-Seal Fittings

Inner Dia.(A) x Outer Dia.(B) Inches (mm)

ST & ET See page 42 for thread specs

.33 x .44 (8.5 x 11.2) .39 x .51 (10 x 13) .47 x .61 (12 x 15.5) .55 x .73 (14 x 18.5) .65 x .83 (16.5 x 21) .89 x 1.12 (22.5 x 28.5) 1.12 x 1.36 (28.5 x 34.5) 1.42 x 1.65 (36 x 42) 1.87 x 2.13 (47.5 x 54)

PG 7, 1/4” NPT PG 7, 1/4” NPT, PG 9 PG 11, 3/8” NPT PG 13 / 13.5 PG 16, 1/2” NPT PG 21, 3/4” NPT PG 29, 1” NPT PG 36, 1-1/4” NPT PG 48, 2” NPT

Conduit System

B A

Conduit System Snap-In Mounting Brackets

Other Products / Index

Technical Information

Mounting Brackets Part Numbers

Fits Nominal Conduit Size

Dimensions A

Width

Length

Height

Mounting Hole ø

Mounting Hole Recess ø

10 12 17 23 29 37 50

.47 (12) .47 (12) .59 (15) .63 (16) .63 (16) .71 (18) .75 (19)

1.18 (30) 1.18 (30) 1.38 (35) 1.65 (42) 2.01 (51) 2.40 (61) 2.91 (74)

.91 (23) .91 (23) 1.18 (30) 1.50 (38) 1.93 (49) 2.01 (51) 2.52 (64)

.20 (5) .20 (5) .24 (6) .26 (6.5) .26 (6.5) .26 (6.5) .26 (6.5)

.35 (9) .39 (10) .47 (12) .47 (12) .47 (12) .47 (12) .47 (12)

A E

Hold conduit securely in place. Material: Black Nylon 6/6

MB-09-BK MB-11-BK MB-16-BK MB-21-BK MB-29-BK MB-36-BK MB-48-BK

• Quick assembly thanks to single-hole fixing

40 Dimensions and specifications may be changed without prior notice.

• Simply snaps into conduit

Nylon Strain Relief

Conduit System Push-In Conduit Fittings Push-In Conduit Fittings Part Numbers Straight Fitting Elbow Fitting

Thread Type & Size

Fits Nominal Conduit Size

SM09NA-BK SM16NA-BK SM21NA-BK SM29NA-BK

EM09NA-BK EM16NA-BK EM21NA-BK EM29NA-BK

SM16MA-BK SM20MA-BK SM25MA-BK SM32MA-BK

EM16MA-BK EM20MA-BK EM25MA-BK 32MA-BK EM32MA-BK

Clearance Hole

Thread Length

Body Length

Wrench Flat

Clearance Hole

Thread Length

Body Height

Body Length

Wrench Flat

.91 (23) 1.06 (27) 1.20 (30.5) 1.28 (32.5) 1.57 (40) 2.03 (51.5) -

.75 (19) .87 (22) .94 (24) 1.06 (27) 1.30 (33) 1.65 (42) -

+ .01” (+.25 mm)

10 12 14 17 23 29 37 50

.60 (15.2) .73 (18.5) .80 (20.3) .88 (22.3) 1.12 (28.4) 1.47 (37.3) 1.85 (47) 2.34 (59.4)

.31 (8) .31 (8) .35 (9) .39 (10) .43 (11) .43 (11) .51 (13) .55 (14)

.91 (23) .98 (25) 1.10 (28) 1.14 (29) 1.26 (32) 1.38 (35) 1.61 (41) 1.81 (46)

.67 (17) .83 (21) .94 (24) 1.06 (27) 1.38 (35) 1.65 (42) 1.97 (50) 2.52 (64)

.60 (15.2) .73 (18.5) .80 (20.3) .88 (22.3) 1.12 (28.4) 1.47 (37.3) -

.31 (8) .31 (8) .35 (9) .39 (10) .43 (11) .43 (11) -

1.69 (43) 1.89 (48) 2.04 (52) 2.20 (56) 2.76 (70) 3.27 (83) -

3/8” NPT 1/2” NPT 3/4” NPT 1” NPT

10 17 23 29

.68 (17.2) .83 (21.1) 1.05 (26.7) 1.35 (34.3)

.60 (15) .51 (13) .51 (13) .59 (15)

.91 (23) 1.14 (29) 1.26 (32) 1.38 (35)

.67 (17) 1.06 (27) 1.38 (35) 1.65 (42)

.68 (17.2) .83 (21.1) 1.05 (26.7) 1.35 (34.3)

.60 (15) .51 (13) .51 (13) .59 (15)

1.69 (43) .91 (23) .75 (19) 2.20 (56) 1.28 (32.5) 1.06 (27) 2.76 (70) 1.57 (40) 1.30 (33) 3.27 (83) 2.03 (51.5) 1.65 (42)

M16 x 1.5 M20 x 1.5 M25 x 1.5 M M32 x 1.5

10 14 23 29

.63 (16) .79 (20) .98 (25) 1.26 (32)

.31 (8) .35 (9) .43 (11) .43 (11)

.91 (23) 1.10 (28) 1.26 (32) 1.38 (35)

.67 (17) .94 (24) 1.38 (35) 1.65 (42)

.63 (16) .79 (20) .98 (25) 1.26 (32)

.31 (8) .35 (9) .43 (11) .43 (11)

1.69 (43) .91 (23) .75 (19) 2.04 (52) 1.20 (30.5) .94 (24) 2.76 (70) 1.57 (40) 1.30 (33) 3.27 (83) 2.03 (51.5) 1.65 (42)

Accessories

EM09AA-BK PG 9 EM11AA-BK PG 11 EM13AA-BK PG 13 / 13.5 EM16AA-BK PG 16 EM21AA-BK PG 21 EM29AA-BK PG 29 PG 36 PG 48

PVDF / Steel

SM09AA-BK SM11AA-BK SM13AA-BK SM16AA-BK SM21AA-BK SM29AA-BK SM36AA-BK SM48AA-BK

Elbow Fitting - Dimensions in Inches (mm)

Nickel Plated Brass

See page 49 for thread specs

Straight Fittings - Dimensions in Inches (mm)

Wrench Flat (D)

SM - Straight

B F

EM - 90° Snap Elbows E G

Wrench Flat (H)

Conduit System

C Combines the unique 90° Snap Elbow and Straight Push-in Fitting fo for easy installation of wires into an Elbow Fitting. The “Straight” Elb Elbow is snapped together after the wires have been installed, resulting in a liquid tight 90° Elbow. res

Adapter,Reducer,Enlarger

T fastest and most labor saving method to connect flexible Nylon The Conduit to a Push-in Fitting. The Nylon Conduit is inserted into the C F Fitting until the hook snaps over the ridge of the Corrugated Tubing. The Conduit can be mounted rigid for liquid tight (NEMA 4x) or Th turnable for non-liquid tight (NEMA 2). tu

Suggested Clearance Hole for Non-Threaded Mounting

Technical Information

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Other Products / Index

SM & EM Fittings feature a Locking Ridge to hold Conduit Tubing in place. They also have an O-Ring groove for optional O-Ring installation. 41 Dimensions and specifications may be changed without prior notice.

The Turn-to-Seal family consists of Conduit Fittings manufactured from high-grade polyamide. This design means that the Fittings offer a high protection rating of IP 65 (NEMA 4). The Fittings are completely pre-assembled and no additional parts such as cap nuts and clamping rings need to be fitted, ensuring reliability in assembly. The cable protection Conduit can be assembled quickly and easily by simply inserting the Conduit and turning the cap nut. The Elbow has smooth inside walls, making the installation of cables & wires easy.

Nickel Plated Brass

Nylon Strain Relief

Conduit System Conduit Fittings: Turn-to-Seal

Turn-To-Seal Conduit Fittings Part Numbers

Thread Type & Size

Fits Nominal Conduit Size

Thread Length

Body Length

Wrench Wrench Flat Flat

Elbow - Dimensions in Inches (mm)

Inside Diameter

Thread Length

Elbow Length

Elbow Height

Wrench Flat

Inside Diameter

ST07AA-BK ST07AR-BK ST09AA-BK ST11AA-BK ST16AA-BK ST21AA-BK ST29AA-BK ST36AA-BK ST48AA-BK

ET09AA-BK ET11AA-BK ET16AA-BK ET21AA-BK ET29AA-BK -

PG 7 PG 7 PG 9 PG 11 PG 16 PG 21 PG 29 PG 36 PG 48

10 8 10 12 17 23 29 37 50

.31 (8) .31 (8) .31 (8) .31 (8) .31 (8) .39 (10) .39 (10) .59 (15) .59 (15)

1.02 (26) 1.02 (26) 1.02 (26) 1.02 (26) 1.02 (26) 1.38 (35) 1.38 (35) 1.81 (46) 1.97 (50)

B d ) (Body) .75 (19) .75 (19) .75 (19) .87 (22) 1.06 (27) 1.46 (37) 1.77 (45) 2.17 (55) 2.52 (64)

(Dome)) .87 (22) .31 (8) .87 (22) .31 (8) .87 (22) .43 (11) .30 (7.5) 1.77 (45) 1.02 (26) .94 (24) .55 (14) .31 (8) 2.01 (51) 1.10 (28) 1.18 (30) .67 (17) .39 (10) 2.20 (56) 1.26 (32) 1.50 (38) .91 (23) .43 (11) 2.64 (67) 1.50 (38) 1.81 (46) 1.22 (31) .47 (12) 3.23 (82) 1.97 (50) 2.40 (61) 1.54 (39) 2.91 (74) 2.01 (51) -

(Dome)) .87 (22) .39 (10) .94 (24) .51 (13) 1.18 (30) .63 (16) 1.50 (38) .87 (22) 1.81 (46) 1.14 (29) -

ST11NA-BK ST16NA-BK ST21NA-BK ST29NA-BK ST36NA-BK

ET11NA-BK ET16NA-BK ET21NA-BK ET29NA-BK -

3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT

12 17 23 29 37

.55 (14) .51 (13) .55 (14) .75 (19) .71 (18)

1.02 (26) 1.02 (26) 1.38 (35) 1.38 (35) 1.81 (46)

.87 (22) 1.06 (27) 1.46 (37) 1.81 (46) 2.17 (55)

.94 (24) .47 (12) 1.18 (30) .55 (14) 1.50 (38) .75 (19) 1.81 (46) 1.02 (26) 2.40 (61) 1.38 (35)

.94 (24) .51 (13) 1.18 (30) .63 (16) 1.50 (38) .83 (21) 1.81 (46) 1.06 (27) -

.31 (8) .39 (10) .43 (11) .47 (12) -

2.01 (51) 2.20 (56) 2.64 (67) 3.23 (82) -

1.14 (29) 1.38 (35) 1.61 (41) 2.09 (53) -

ST & ET Fittings are V0 rated & have IP 65 protection without additional parts (O-Ring or Seal Ring).

ST - Straight Conduit Fittings with plastic thread • Reliable assembly as fitting is supplied pre-assembled. No additional parts required • Integrated clamping ring ensures high tear-out strength • High protection to IP 65 (NEMA 4) without additional parts • Can be opened without tools

Conduit System

Adapter,Reducer,Enlarger

Accessories

PVDF / Steel

See page 49 for thread specs

Straight Fitting - Dimensions in Inches (mm)

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28 & 29.

Wrench Flat (D)

Wrench Flat (C)

ET - 90° Angled Conduit Fittings with plastic thread

Technical Information

• • • • • •

Reliable assembly as fitting is supplied pre-assembled. No additional parts required Integrated clamping ring ensures high tear-out strength High protection to IP 65 without additional parts Can be opened without tools Smooth inside walls, therefore easy insertion of the cables into o the 90° angle

Other Products / Index

Advantages: • • • • •

High protection rating of IP 65 (NEMA 4) One-part fitting Rapid assembly High pull-out resistance Inner contours of 90° fittings are rounded

42 Dimensions and specifications may be changed without prior notice.

Wrench Flat (I)

F J

Snapclic DUO - Nylon Part Numbers

IP 54

Optional Locking Nuts, O-Rings & Other Accessories starting on page 28. F1/F

(+.25 mm)

C Cable Range

.73 (18.5) .31 (8) 1.65 (42)

.98 (25)

.87 (22)

PG 13 / 13.5

.80 (20.3) .35 (9) 1.73 (44)

.98 (25)

.94 (24)

PG 16

.88 (22.3) .39 (10) 1.81 (46) 1.18 (30) 1.06 (27)

PG 21

1.12 (28.4) .43 (11) 1.97 (50) 1.38 (35) 1.30 (33)

PG 29

1.47 (37.3) .43 (11) 2.36 (60) 1.65 (42) 1.65 (42)

PG 36

1.85 (47) .51 (13) 2.36 (60) 1.97 (50) 2.09 (53)

.63 (16)

.31 (8) 1.65 (42)

.98 (25)

.87 (22)

.79 (20)

.35 (9) 1.73 (44)

.98 (25)

.94 (24)

.79 (20)

.39 (10) 1.81 (46) 1.18 (30) 1.06 (27)

.98 (25)

.43 (11) 1.97 (50) 1.38 (35) 1.30 (33)

1.26 (32) .43 (11) 2.36 (60) 1.65 (42) 1.65 (42)

1.57 (40) .51 (13) 2.36 (60) 1.97 (50) 2.09 (53)

DUO16MA-BK .20 - .39 (5 - 10) M16 x 1.5 DUO16MR-BK .12 - .28 (3 - 7) DUO20MA-BK .24 - .47 (6 - 12) M20 x 1.5 DUO20MR-BK .20 - .35 (5 - 9) DUO22MA-BK .39 - .55 (10 - 14) M20 x 1.5 DUO22MR-BK .28 - .47 (7 - 12) DUO25MA-BK .51 - .71 (13 - 18) M25 x 1.5 DUO25MR-BK .35 - .63 (9 - 16) DUO32MA-BK .71 - .94 (18 - 24) M32 x 1.5 DUO32MR-BK .51 - .79 (13 - 20) DUO40MA-BK .87 - 1.22 (22 - 31) M40 x 1.5 DUO40MR-BK .79 - 1.02 (20 - 26)

See page 49 for thread specs

Dimensions Fits Nominal A B C D Conduit Thread Body Outer Hole O.D. Size + .01” Length Length Diameter (+.25 mm)

F1/F Wrench Flat

.73 (18.5)

.24 (6) 1.52 (38.5) .91 (23)

.79 (20)

PG 13 / 13.5

.80 (20.3)

.24 (6) 1.56 (39.5) .98 (25)

.87 (22)

PG 16

.88 (22.3)

.24 (6) 1.63 (41.5) 1.14 (29) .94 (24)

PG 21

1.12 (28.4) .28 (7) 1.75 (44.5) 1.18 (30) 1.18 (30)

PG 29

1.47 (37.3) .31 (8) 2.07 (52.5) 1.54 (39) 1.57 (40)

PG 36

1.85 (47)

.31 (8)

.63 (16)

.24 (6) 1.52 (38.5) .91 (23)

.79 (20)

.24 (6) 1.56 (39.5) .98 (25)

.87 (22)

.79 (20)

.24 (6) 1.63 (41.5) 1.14 (29) .94 (24)

.98 (25)

.28 (7) 1.75 (44.5) 1.18 (30) 1.18 (30)

1.26 (32)

.31 (8) 2.07 (52.5) 1.54 (39) 1.57 (40)

1.57 (40)

.31 (8)

Metal style comes with a Standard O-Ring

Rotatable

IP 68

2.32 (59) 1.77 (45) 1.97 (50)

Pressure Rating: Installation side - IP 68 (10 bar) Conduit side - IP 54 F1/F

Other Products / Index

IP 54

Technical Information

PG 11

DUO16MA-BR .20 - .39 (5 - 10) M16 x 1.5 DUO16MR-BR .12 - .28 (3 - 7) DUO20MA-BR .24 - .47 (6 - 12) M20 x 1.5 DUO20MR-BR .20 - .35 (5 - 9) DUO22MA-BR .39 - .55 (10 - 14) M20 x 1.5 DUO22MR-BR .28 - .47 (7 - 12) DUO25MA-BR .51 - .71 (13 - 18) M25 x 1.5 DUO25MR-BR .35 - .63 (9 - 16) DUO32MA-BR .71 - .94 (18 - 24) M32 x 1.5 DUO32MR-BR .51 - .79 (13 - 20) DUO40MA-BR .87 - 1.22 (22 - 31) M40 x 1.5 DUO40MR-BR .79 - 1.02 (20 - 26)

Suggested Clearance Hole for Non-Threaded Mounting

Conduit System

Inches (mm) DUO11AA-BR .20 2 - .39 (5 - 10) DUO11AR-BR .12 - .28 (3 - 7) DUO13AA-BR .24 - .47 (6 - 12) DUO13AR-BR .20 - .35 (5 - 9) DUO16AA-BR .39 - .55 (10 - 14) DUO16AR-BR .28 - .47 (7 - 12) DUO21AA-BR .51 - .71 (13 - 18) DUO21AR-BR .35 - .63 (9 - 16) DUO29AA-BR .71 - .94 (18 - 24) DUO29AR-BR .51 - .79 (13 - 20) DUO36AA-BR .87 - 1.22 (22 - 31) DUO36AR-BR .79 - 1.02 (20 - 26)

Thread Type & Size

Wrench Flat

PG 11

Snapclic DUO - Nickel Plated Brass Part Numbers

F1/F

2.32 (59) 1.77 (45) 1.97 (50)

43 Dimensions and specifications may be changed without prior notice.

Adapter,Reducer,Enlarger

See page 49 for thread specs

Dimensions Fits Nominal A B C D Conduit Hole O.D. Thread Body Outer Size + .01” Length Length Diameter

Accessories

Thread Type & Size

PVDF / Steel

Inches (mm) DUO11AA-BK .20 - .39 (5 - 10) DUO11AR-BK .12 - .28 (3 - 7) DUO13AA-BK .24 - .47 (6 - 12) DUO13AR-BK .20 - .35 (5 - 9) DUO16AA-BK .39 - .55 (10 - 14) DUO16AR-BK .28 - .47 (7 - 12) DUO21AA-BK .51 - .71 (13 - 18) DUO21AR-BK .35 - .63 (9 - 16) DUO29AA-BK .71 - .94 (18 - 24) DUO29AR-BK .51 - .79 (13 - 20) DUO36AA-BK .87 - 1.22 (22 - 31) DUO36AR-BK .79 - 1.02 (20 - 26)

Rotatable

IP 68

Cable Range

Nickel Plated Brass

• Combination of Strain Relief & Conduit Fittings • Push-in system • Partially rotatable • Can be equipped with Multi-Hole inserts • Metal style can be changed to EMI/RFI • Metal Style also available in ATEX

Nylon Strain Relief

Conduit System Conduit Fittings: Snapclic DUO

Advantages:

Double-Seal Fittings Part Numbers

Thread Type & Size See page 49 for thread specs

Cable Range

Fits Nominal Conduit Size

F1/F

Hole O.D.

Thread Length

Body Length

Wrench Flat

+ .01” (+.25 mm)

DS09AA-BK DS11AA-BK DS13AA-BK DS16AA-BK DS21AA-BK

PG 9 .16 - .31 (4 - 8) PG 11 .20 - .39 (5 - 10) PG 13 / 13.5 .24 - .47 (6 - 12) PG 16 .39 - .55 (10 - 14) PG 21 .51 - .71 (13 - 18)

10 12 17 17 23

.60 (15.2) .31 (8) .73 (18.5) .31 (8) .80 (20.3) .35 (9) .88 (22.3) .39 (10) 1.12 (28.4) .43 (11)

1.73 (44) .75 (19) / .87 (22) 1.85 (47) .87 (22) / .95 (24) 1.93 (49) .95 (24) / 1.18 (30) 1.97 (50) 1.06 (27) / 1.18 (30) 2.32 (59) 1.30 (33) / 1.50 (38)

DS09NA-BK DS13NA-BK DS16NA-BK DS21NA-BK

3/8” NPT .16 - .31 (4 - 8) 1/2” NPT .24 - .47 (6 - 12) 1/2” NPT .39 - .55 (10 - 14) 3/4” NPT .51 - .71 (13 - 18)

10 17 17 23

.68 (17.2) .83 (21.1) .83 (21.1) 1.05 (26.7)

.59 (15) .51 (13) .51 (13) .51 (13)

2.01 (51) .75 (19) / .87 (22) 2.09 (53) .95 (24) / 1.18 (30)) 2.09 (53) 1.06 (27) / 1.18 .18 (30) 2.40 (61) 1.300 (33) / 1.50 (38)

DS16MA-BK DS20MA-BK DS25MA-BK

M16 x 1.5 .16 - .31 (4 - 8) M20 x 1.5 .24 - .47 (6 - 12) M25 x 1.5 .51 - .71 (13 - 18)

10 17 23

.63 (16) .79 (20) .98 (25) 5)

.31 (8) .355 (9) .43 (11)

1.73 (44) .75 (19) / .87 (22) 1.93 (49) .95 (24) / 1.18 (30) 2.32 (59) 1.30 (33) / 1.50 (38)

F1/F

Suggested Clearance Hole for Non-Threaded Mounting

Bulkhead Conduit Fittings with Thread Part Numbers rs

Advantages tages (Threaded): Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

• V0 Rated • Combined Conduit and Cable Fitting 2-in-1 • Clamping around entire circumference, ensuring maximum pull-out resistance • No loose parts - Fitting does not have to be dismantled for assembly • High degree of protection

Dimensions

Inches (mm)

Accessories Accessories Accessories

PVDF Steel PVDF /// Steel Steel PVDF

Nickel Plated Brass Nickel Plated Plated Brass Brass Nickel

Nylon Strain Relief Nylon Strain Strain Relief Relief Nylon

Nickel Technical Liquid Information Strain NickelPlated PlatedBrass Brass LiquidTight Tight StrainRelief ReliefFittings Fittings Conduit System Conduit Fittings: Double-Seal & Bulkhead

Thread Type & Size See page 49 for thread specs

• Split system enables pre-assembled cables to be inserted by means of removable upper part • Easy assembly • High stability • Supplied with gasket for flange connection. • Internal thread for Metric and PG Fittings g

FL-11-BK FL-16-BK FL-21-BK FL-29-BK FL-36-BK FL-48-BK

PG 11 PG 16 PG 21 PG 29 PG 36 PG 48

Fits Nominal Conduit Size 12 17 23 29 37 50

Dimensions in Inches (mm) A

Len Length

Width

Height

Distance between Holes 1.46 (37) 1.46 (37) 2.05 (52) 2.56 (65) 3.15 (80) 3.46 (88)

Hole Diameter

1.93 (49) 1.85 (47) 1.93 (49) 1.85 (47) 2.72 (69) 2.56 (65) 3.54 (90) 3.07 (78) 3.94 (100) 3.70 (94) 4.57 (116) 3.98 (101)

1.38 (35) 1.38 (35) 1.73 (44) 2.17 (55) 2.60 (66) 2.99 (76)

.20 (5) .20 (5) .26 (6.5) .28 (7) .28 (7) .28 (7)

Conduit System Conduit System System Conduit

Bulkhead Conduit Fittings without Thread Part Numbers

Other Products Index Other Products Products /// Index Index Other

Technical Information Technical Information Information Technical

Advantages (Without Thread):

FT-11-BK FT-16-BK FT-21-BK FT-29-BK FT-36-BK FT-48-BK

• Split system enables pre-assembled cables to be inserted by means of removable upper part • Easy assembly • High stability • Supplied with gasket for flange connection. • Conduit remains rotatable

44 44

Width

Height

12 17 23 29 37 50

1.93 (49) 1.93 (49) 2.72 (69) 3.54 (90) 3.94 (100) 4.57 (116)

1.85 (47) 1.85 (47) 2.56 (65) 3.07 (78) 3.70 (94) 3.98 (101)

1.38 (35) 1.38 (35) 1.73 (44) 2.17 (55) 2.60 (66) 2.99 (76)

Distance Hole between Diameter Holes 1.46 (37) .20 (5) 1.46 (37) .20 (5) 2.05 (52) .26 (6.5) 2.56 (65) .28 (7) 3.15 (80) .28 (7) 3.46 (88) .28 (7)

• Bulkhead Fittings are manufactured from high-grade polyamide. • Split system: large cut-out size allows for quick & easy insertion of pre-assembled cables into a housing. • Protection rating: IP 54 or IP 65. • The higher IP 65 protection rating is achieved in combination with a suitable Conduit Fitting.

(up to M25 / PG 21)

A Length

Note: Screws not included.

Dimensions in Inches (mm)

Fits Nominal Conduit Size

(from to M32 / PG 29) Drawings apply types For Material(Technical Specifications please referto toboth page 45. of Bulkhead Fittings)

Note: The design of the Bulkhead Fittings changes depending on size. Up to M25/PG 21 the Fitting has 3 screw holes, from size M32 / PG 29 the Fitting has 4 screw holes. (see technical drawings)

Dimensions specifi cations be changed prior notice. Dimensions and and specifi cations maymay be changed without without prior notice.

Nylon Nylon Strain Strain Relief Relief

NickelPlated PlatedBrass Brass Technical Liquid Information TightStrain StrainRelief ReliefFittings Fittings Nickel Liquid Tight

Material Speciﬁcations Nylon

PVDF Pressure Rating:

150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K

Materials:

Fittings: Nylon 6/6 - UL f1 (UV / Ozone Stable) Photovoltaic / Solar • Form Seal: Buna-N • Optional O-Ring: Buna-N, Viton® or Silicone • Optional Seal Ring: Polyethylene or Fiber-Reinforced Plastic

• • • •

Resistant to: ®

Fittings: Teflon or Nickel Plated Brass Form Seal: Viton® (FPM) Clamping Insert: PVDF O-Ring: Viton® (FPM)

Operating Temperature:

Nylon Fittings: - 40ºC to 100ºC (- 40ºF to 212ºF) Nylon Fitting w/ Aluminum Clamp: - 20ºC to 70ºC (- 4ºF to 158ºF)

- 35ºC to 150ºC (- 31ºF to 302ºF), V0 rated

Available Colors:

• • • • • • • •

Acid Salt solution Oxydant Halogens Alcohols Chlorinated solvent Aliphatic hydrocarbons Petrol

PVDF PVDF // Steel Steel

Operating Temperature:

Stainless Steel Pressure Rating:

• Black (RAL 9005) • Gray (RAL 7035) • Blue (RAL 5012) - upon request

150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K Materials:

Nylon 6/6: V0 rated - Flame resistant, halogen and phosphorous free, self-extinguishing, non-toxic, fungus resistant, UL f1, UV/Ozone Stable

Pressure Rating:

Fittings: 303 Stainless Steel Form Seal: Buna-N (NBR) or Viton® (FPM) Clamping Insert: PA (Nylon) or PVDF O-Ring: Buna-N (FPM), Viton® or Silicone

Operating Temperature:

Materials:

Buna-N: - 40ºC to 100ºC (- 40ºF to 212ºF) PVDF: - 35ºC to 150ºC (- 31ºF to 302ºF)

EMI Feed-Through

Fittings: Nickel Plated Brass Clamping Insert: Spring (Flex Extension): Stainless Steel Metal Coated Nylon Form Seal: Buna-N (NBR) Splined Bushing: Nylon 6/6 O-Ring: Buna-N (Viton® or Silicone optional) Optional Seal Ring: Polyethylene or Fiber-Reinforced Plastic

Insert Materials Materials

Operating Temperature: - 40ºC to 100ºC (- 40ºF to 212ºF)

• • • • •

Operating Temperatures

Materials

Operating Temperatures

• Buna-N • Viton® (FPM) • Silicone

- 30ºC to 120ºC (- 22ºF to 248ºF) - 40ºC to 200ºC (- 40ºF to 392ºF) - 60ºC to 250ºC (- 76ºF to 482ºF)

• Polyethylene • Fiber-reinforced Plastic

- 30ºC to 70ºC (- 22ºF to 158ºF) - 55ºC to 300ºC (- 67ºF to 572ºF)

UL/UR CSA VDE CAGE PATENT

Operating Temperatures - 40ºC to 80ºC (- 40ºF to 176ºF) - 40ºC to 100ºC (- 40ºF to 212ºF)

Technical Technical Information Information

- 40°C to 100°C (- 40°F to 212°F) - 25ºC to 200ºC (- 13ºF to 392ºF) - 20ºC to 100ºC (- 4ºF to 212ºF)

Adapter, Reducer & Enlarger Materials • Nylon • Nickel Plated Brass

Conduit Conduit System System

Nickel Plated Brass - WADI

Materials

- 40ºC to 100ºC (- 40ºF to 212ºF) - 40ºC to 100ºC (- 40ºF to 212ºF) - 25ºC to 200ºC (- 13ºF to 392ºF) - 40°C to 100°C (- 40°F to 212°F) - 60ºC to 250ºC (- 76ºF to 482ºF)

O-Ring & Seal Ring Materials

Nylon 6/6: V0 rated - Flame resistant, halogen and phosphorous free, self extinguishing, non-toxic, fungus resistant

• Mini WADI (TPE) • Mini WADI (Viton®) • WADI XL (Buna-N)

Operating Temperatures

Buna-N Elastomer Viton® (FPM) TPE Silicone

*NPB with PVDF -35ºC to -150ºC (-31ºF to 302ºF)

Type

Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

150 PSIG (10 BAR) NEMA 4x, 6 (Submersible) & 12 - IP 68 / IP 69K

Accessories Accessories

• • • •

Nickel Plated Brass

• • • • • •

Nickel Nickel Plated Plated Brass Brass

Pressure Rating:

E103997 074032 71339 ZERO UE114 4145075

Ex-tD

V0 Flammability Rating according to UL 94 (applies to all Strain Relief Fittings)

Call for Technical Assistance: 800-456-9012 / 303-699-1135 Viton® and Teflon® are federally registered trademarks of DuPont Dow Elastomer. Dimensions and specifications may be changed without prior notice.

For Material Specifications please refer to page 45.

Other Other Products Products // Index Index

Most of our standard products are also available in EEx e & ATEX versions!

Nylon Nylon Strain Strain Relief Relief

Nickel Technical Liquid Information NickelPlated PlatedBrass Brass LiquidTight TightStrain StrainRelief ReliefFittings Fittings NEMA Ratings - Overview NEMA stands for the National Electrical Manufacturers Association. It has established a range of standards for electrical equipment enclosures.

Nickel Nickel Plated Plated Brass Brass

NEMA 1 General Purpose - Indoors Type 1 - intended for general purpose indoor use primarily to provide a degree of protection against contact with the enclosed equipment or locations where unusual service conditions do not exist.

NEMA 2 Drip Proof - Indoors Type 2 - intended for general purpose indoor use primarily to provide a degree of protection against limited amounts of falling water and dirt.

NEMA 3 Dust Tight, Rain Tight, & Ice/Sleet resistant - Indoors/Outdoors Type 3 - intended for general purpose outdoor use primarily to provide a degree of protection against windblown dust, rain, and sleet; and to be undamaged by the formation of ice on the enclosure.

NEMA 3R Rain Proof & Ice/Sleet Proof - Indoors/Outdoors PVDF PVDF // Steel Steel

Type 3R - intended for general purpose outdoor use primarily to provide a degree of protection against falling rain; and to be undamaged by the formation of ice on the enclosure.

NEMA 3S Dust Tight, Rain Tight, & Ice/Sleet Proof - Outdoors Type 3S - intended for general purpose outdoor use primarily to provide a degree of protection against sleet; and to be undamaged by the formation of ice on the enclosure.

NEMA 4 Water Tight & Dust Tight - Indoors/Outdoors Type 4 - intended for general purpose indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose directed water; and to be undamaged by the formation of ice on the enclosure.

Accessories Accessories

NEMA 4x Water Tight, Dust Tight, & Corrosion Resistant - Indoors/Outdoors Type 4X - intended for general purpose indoor and outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, and hose-directed water; and to be undamaged by the formation of ice on the enclosure.

NEMA 5 Superseded by NEMA 12 for Control Apparatus Type 5 - see NEMA 12

Type 6 - intended for general purpose indoor or outdoor use primarily to provide a degree of protection against the entry of water during temporary submersion at a limited depth; and to be undamaged by the formation of ice on the enclosure.

NEMA 6P Submersible, Water Tight, Dust Tight, & Ice/Sleet Resistant - Indoors/Outdoors Type 6P - Same as NEMA 6 including protection against the entry of water during prolonged submersion at a limited depth.

NEMA 7 Underwriters Lab Class 1-Groups C&D -Explosion Proof - Indoors

Conduit Conduit System System

Type 7 - for indoor use in locations classified as Class I, Groups A, B, C, or D, as defined in the National Electrical Code. Type 7 enclosures shall be capable of withstanding the pressures resulting from an internal explosion of specified gases, and contain such an explosion sufficiently that an explosive gas-air mixture existing in the atmosphere surrounding the enclosure will not be ignited. Enclosed heat generating devices shall not cause external surfaces to reach temperatures capable of igniting explosive gas-air mixtures in the surrounding atmosphere. Enclosures shall meet explosion, hydro-static, and temperature design tests.

NEMA 8 Underwriters Lab Class 1-Groups C&D -Explosion Proof - Indoors

Technical Technical Information Information

Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

NEMA 6 Submersible, Water Tight, Dust Tight, & Ice/Sleet Resistant - Indoors/Outdoors

NEMA 10 Bureau of Mines

Type 8 is same as NEMA 7, except the unit is oil-immersed

NEMA 9 Underwritersâ&#x20AC;&#x2122; Lab Class II - Groups E, F, G - Indoors Type 9 - intended for special purpose indoor use in locations classified as hazardous (Class II, Groups E, F, or G, as defined in the National Electrical Code). Type 9 enclosures shall be capable of preventing the entrance of dust. Enclosed heat generating devices shall not cause external surfaces to reach temperatures capable of igniting or discoloring dust on the enclosure or igniting dust-air mixtures in the surrounding atmosphere. Enclosures shall meet dust penetration and temperature design tests, and aging of gaskets (if used).

NEMA 11 Corrosion Resistant & Drip Proof - Oil Immersed - Indoors NEMA 12 Industrial Use - Dust Tight & Drip Tight - Indoors Type 12 - intended for industrial indoor use primarily to provide a degree of protection against dust, falling dirt, and dripping noncorrosive liquids.

NEMA 13 Oil Tight & Dust Tight - Indoors

Other Other Products Products // Index Index

Type 13 - intended for industrial indoor use primarily to provide a degree of protection against dust, spraying of water, oil, and noncorrosive coolant.

NEMA Rating IP Class

NEMA 1

NEMA 2

NEMA 3

NEMA 3R

NEMA 3S

NEMA 4

NEMA 4x

NEMA 6

NEMA 6P

NEMA 12, 12K

NEMA 13

IP 23

IP 30

IP 64

IP 32

IP 64

IP 66

IP 66-68

IP 67-68

IP 65

Indoor Outdoor

Indoor & Outdoor

46 46

For Material Specifications please refer to page 45.

Call for Technical Assistance: 800-456-9012 / 303-699-1135 Dimensions and specifications may be changed without prior notice.

Nylon Nylon Strain Strain Relief Relief

NickelPlated PlatedBrass Brass Technical Liquid Information TightStrain StrainRelief ReliefFittings Fittings Nickel Liquid Tight IP Ratings The IP Code defined in international standard IEC 60529 classifies the degrees of protection provided against the intrusion of: solid objects (including body parts like hands and fingers) dust accidental contact water in electrical enclosures

Nickel Nickel Plated Plated Brass Brass

• • • •

It consists of the letters IP (for “International Protection Rating” or “Ingress Protection Rating”) followed by two digits and an optional letter. The standard aims to provide users more detailed information than vague marketing terms such as “waterproof”.

Level Object size protected against

Effective against

No protection against contact and ingress of objects

>50 mm

Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part

>12.5 mm

Fingers or similar objects

>2.5 mm

Tools, thick wires, etc.

>1 mm

Most wires, screws, etc.

dust protected

Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact

dust tight

No ingress of dust; complete protection against contact

Accessories Accessories

Level Protected against

PVDF PVDF // Steel Steel

Details -

dripping water

Dripping water (vertically falling drops) shall have no harmful effect.

dripping water when tilted up to 15°

Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.

spraying water

Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.

splashing water

Water splashing against the enclosure from any direction shall have no harmful effect.

water jets

Water projected by a nozzle against enclosure from any direction shall have no harmful effects.

powerful water jets

Water projected in powerful jets against the enclosure from any direction shall have no harmful effects.

immersion up to 1 m

Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion).

immersion beyond 1 m

The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. NOTE: Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that produces no harmful effects.

Conduit Conduit System System

not protected

Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

IP 69K Technical Technical Information Information

German standard DIN 40050-9 extends the IEC 60529 rating system described above with an IP 69K rating for high-pressure, high-temperature wash-down applications. Such enclosures must not only be dust tight (IP 6X), but also able to withstand high-pressure and steam cleaning. The test specifies a spray nozzle that is fed with 80 °C (176 °F) water at 8–10 MPa (80–100 bar) and a flow rate of 14–16 L/min. The nozzle is held 10–15 cm (3.94” - 5.91”) from the tested device at angles of 0°, 30°, 60° and 90° for 30 seconds each. The test device sits on a turntable that rotates once every 12 s (5 rpm). The IP 69K test specification was initially developed for road vehicles, especially those that need regular intensive cleaning (dump trucks, cement mixers, etc), but also finds use in other areas (e.g., food industry, railroad, marine, etc.)

Other Other Products Products // Index Index

The most commonly used protection methods are IP and NEMA, whereas: • IP Classification – addresses the European market • NEMA Classification – addresses the North American market

For questions please call our Inside Technical Sales Department - 1-800-456-9012 or 303-699-1135. For Material Specifications please refer to page 45. Dimensions and specifications may be changed without prior notice.

Nylon Nylon Strain Strain Relief Relief

Nickel Technical Liquid Information NickelPlated PlatedBrass Brass LiquidTight TightStrain StrainRelief ReliefFittings Fittings Sizes & Dimensions for SEALCON Liquid Tight Strain Relief Fittings Major Thread Minor Thread Diameter Diameter M6 x 1.0 6.0 mm / .24” 5.0 mm / .19” M8 x 1.25 8.0 mm / .31” 6.8 mm / .26” M10 x 1.5 10.0 mm / .40” 8.4 mm / .33” M12 1.5 12.0 mm / .47” 8.0 mm / .32”

Accessories Accessories

PVDF PVDF // Steel Steel

Nickel Nickel Plated Plated Brass Brass

Metric

M16 x 1.5

16.0 mm / .63”

14.5 mm / .57”

M20 x 1.5

20.0 mm / .79”

18.5 mm / .72”

M25 x 1.5

25.0 mm / .98”

M32 x 1.5

32.0 mm / 1.26” 30.5 mm / 1.20”

Major Thread Minor Thread Diameter Diameter

PG 7 PG 9

12.5 mm / .49” 15.2 mm / .60”

11.3 mm / .44” 13.9 mm / .54”

PG 11

18.6 mm / .73”

17.3 mm / .68”

PG 13 PG 16

20.4 mm / .80” 22.5 mm / .89”

19.1 mm / .75” 21.2 mm / .83”

NPT

Major Thread Minor Thread Diameter Diameter

1/4” 3/8”

12.5 mm / .49” 16.8 mm / .66”

1/2” 1/2”-E

20.8 mm / .82” 20.8 mm / .82”

PG 21 28.3 mm / 1.11” 26.8 mm / 1.05”

3/4”

26.2 mm / 1.03”

PG 29 37.0 mm / 1.46” 35.5 mm / 1.39”

1” 1-1/4”

32.8 mm / 1.29” 41.4 mm / 1.63”

PG 36 47.0 mm / 1.85” 45.5 mm / 1.79”

1-1/2”

47.8 mm / 1.88”

23.5 mm / .92”

M40 x 1.5

40.0 mm / 1.57” 38.5 mm / 1.51”

M50 x 1.5

50.0 mm / 1.97” 48.5 mm / 1.90” PG 42 54.0 mm / 2.13” 52.5 mm / 2.13” PG 48 59.3 mm / 2.33” 57.8 mm / 2.72”

M63 x 1.5

63.0 mm / 2.48” 61.5 mm / 2.42”

Dome Opening 3.0 mm / .11” 5.0 mm / .19” 6.0 mm / .24” 6.5 mm / .26” 11.6 mm / .46” 6.5 mm / .26” 15.2 mm / .60” 8.0 mm / .31” 8.0 mm / .31” 10.0 mm / .39” 12.0 mm / .47” 18.8 mm / .74” 12.0 mm / .47” 18.8 mm / .74” 14.0 mm / .55” 18.0 mm / .71” 24.1 mm / .95” 18.0 mm / .71” 25.0 mm / 0.98” 30.5 mm / 1.20” 25.0 mm / 0.98” 38.1 mm / 1.50” 25.0 mm / 0.98” 32.0 mm / 1.26” 45.7 mm / 1.80” 32.0 mm / 1.26” 38.0 mm / 1.50” 38.0 mm / 1.50” 44.0 mm / 1.73” 44.0 mm / 1.73”

Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

Determine Sizes & Type of Fitting: 1. 2. 3. 4. 5. 6.

Check markings on the hex portion (wrenching flats). PG, NPT or Metric size should be embedded. This only applies to Nylon parts. Measure major thread diameter and compare with chart above. This may tell you whether it is a PG, NPT or Metric thread (Nylon or Brass) Confirm grommet type inside fitting. (See table on right for grommet identification) The shorter length fittings are CD’s (connector dome), the longer type are CF’s (connector flex). We offer Enlarged as well as Reduced solutions. A PG13.5/16 has a PG13 thread with a PG16 body. Reduced would be the opposite (only in Nylon) The shading (grouping) indicates same size bodies, but different threads.

Grommet Identification Color Type of Grommet Black Gray Beige Green Brown

Standard Reduced Multi-Hole / Solid Plug Viton® Silicone

Note: Conduit Conduit System System

Dome Opening = the largest possible dimension for one or more cables. The chart can also be useful when working with knockouts (drilling holes) Viton® is a federally registered trademark of DuPont Dow Elastomer.

Recommended Torque Specifications for Strain Relief Fittings Torque in inlb (Nm)

PG7, M12x1.5 PG9, PG11, PG13, 3/8”NPT, 1/2”NPT, M16x1.5, M20x1.5 PG16, 1/2”NPT-E PG21, PG29, PG36, PG42, PG48, 3/4”NPT, 1”NPT, 1-1/4”NPT, 1-1/2”NPT, M25, M32, M40, M50, M63 Note:

Other Other Products Products // Index Index

Technical Technical Information Information

Sizes

Plastic Fittings Dome Nuts Thread & Lock Nuts 14.4 (1.62) 22.1 (2.5) 22.1 (2.5) 33.2 (3.75) 29.5 (3.33) 44.2 (5) 44.2 (5)

66.4 (7.5)

Metal Fittings Dome Nuts Thread & Lock Nuts 36.9 (4.17) 55.3 (6.25) 36.9 (4.17) 55.3 (6.25) 44.2 (5) 66.4 (7.5) 59 (6.67)

Torque for dome nuts was determined using a metal rod. It may vary for cable, depending on the crush resistance of the cable. We recommend to determine the actual torque empirically, testing the actual cable used. The values shown above are for reference only. Torque Specification is based on Norm: EN 50262

Pull-Test Rating for Strain Relief Fittings The Pull-Test Rating of our Strain Relief Fittings complies with Industry Standards. Pull-Test Rating: 35 lb. 48 48

88.5 (10)

questions For Material SpecificationsFor please refer to please page 45.call our Inside Technical Sales Department - 1-800-456-9012 or 303-699-1135. Dimensions and specifications may be changed without prior notice.

Nylon Nylon Strain Strain Relief Relief

NickelPlated PlatedBrass Brass Technical Liquid Information TightStrain StrainRelief ReliefFittings Fittings Nickel Liquid Tight Thread Specifications NPT Threads 1/4” NPT

3/8” NPT

1/2” NPT

3/4” NPT

1” NPT

1-1/4” NPT

1-1/2” NPT

2” NPT

Major Dia. in Inches (mm)

.54 (13.72)

.69 (17.15)

.84 (21.34)

1.05 (26.67)

1.32 (33.40)

1.66 (42.16)

1.90 (48.26)

2.38 (60.33)

Pitch in Inches (mm) Threads per Inch

.056 (1.41)

.071 (1.81)

.087 (2.21)

11.5

Nickel Nickel Plated Plated Brass Brass

Thread Size

Pitch

60º

• NPT Thread = National Pipe Thread • Taper rate for all NPT threads is 1/16 • The taper on NPT threads allows them to form a seal when torqued as the flanks of the threads compress against each other, as opposed to straight thread fittings

conicity: 6.25%

PVDF PVDF // Steel Steel

90º

Metric Threads Thread Size

M10

M12

M16

M32

M40

M50

M63

Major Dia. in Inches (mm)

.24 (6)

.31 (8)

.39 (10)

.47 (12)

.63 (16)

.79 (20) .98 (25)

1.26 (32)

1.57 (40)

1.97 (50)

2.48 (63)

Pitch in Inches (mm)

.04 (1)

.05 (1.25)

.06 (1.5)

.06 (1.5) .06 (1.5) .06 (1.5)

.06 (1.5)

M25

Accessories Accessories

60º

M20

Pitch

• World-wide most commonly used type thread • Characterized by its major diameter and its pitch • Designated by the letter M followed by the value of the nominal diameter and the pitch, both expressed in millimeters and separated by the multiplication sign ‘×’ (i.e. M12 x 1.5)

Adapter,Reducer,Enlarger Adapter,Reducer,Enlarger

PG Threads Thread Size

PG 7

PG 9

PG 11

PG 13 / 13.5

Major Dia. in Inches (mm)

.49 (12.5)

.60 (15.2)

.73 (18.6)

.80 (20.4)

.89 (22.5) 1.11 (28.3)

Pitch in Inches (mm)

.05 (1.27) .055 (1.41) .055 (1.51)

.055 (1.51)

.055 (1.51) .062 (1.59) .062 (1.59) .062 (1.59) .062 (1.59) .062 (1.59)

80º

Pitch

PG 16

PG 21

PG 29

PG 36

1.46 (37)

1.85 (47)

PG 42

PG 48

2.13 (54) 2.39 (59.3)

Conduit Conduit System System

• PG Thread = Panzer-Gewinde (also Panzer-Rohr-Gewinde) • German thread type • Depth of thread smaller than NPT or Metric, but larger flank angle

BSPP (G) Threads Major Dia. in Inches (mm) Pitch in Inches (mm) Threads per Inch 55º Pitch

G 2-1/2”

G 3”

G 4”

2.96 (75.84)

3.46 (87.88)

4.45 (113.03)

.09 (2.31)

Technical Technical Information Information

Thread Size

Other Other Products Products // Index Index

• BSPP Thread = British Standard Pipe Parallel Thread • Parallel (straight) thread with a constant diameter, denoted by the letter G • Symmetrical V-thread in which the angle between the flanks is 55° (measured in an axial plane) • One-sixth of this sharp V is truncated at the top and the bottom • Threads are rounded equally at crests and roots by circular arcs ending tangentially with the flanks • The theoretical depth of the thread is therefore 0.64 times the nominal pitch

Nylon Strain Relief

Other Products Circular Connectors

Nickel Plated Brass

M27 Signal

M40 M23 RJ45 Industrial I Ethernet E M16, M23, M40 Push-Pull

PVDF / Steel

M23 Power

M23 Stainless Steel

M23 Signal

Accessories

M16

M23 Over-Molded Cord-sets

M12 / M16 Twintus

M23 PoE E (P (Power over Ethernet) ProfiNet

Why use Sealcon / Hummel Circular Connectors?

Conduit System

Adapter,Reducer,Enlarger

• • • • • • • • • • • • • • •

Easy MRO Field Assembly No Special Tools Required to Insert or Extract Contacts Modular for a Variety of Configurations All Connectors are EMI Ready Threaded and Push-Pull (Quick Disconnect) Interchangeable Compatible with other DIN Style Connectors Reliable Connection – Contacts with Low Plug-In Force & High Mating Cycles Pre-Tinned Contacts – Reliable, Faster and Safer Means of Soldering Vibration Safe Contacts (SLS) Inserts for all Types of Contacts – Crimp, Solder & Dip Solder Reduced Number of Parts Time-Saving Cable Assembly Highest Ratings Orders! Large Assortment of Domestic Inventory Excellent Customer Service

No Minimum

Industries Served

Technical Information

• • • • • •

Solar Wind Motors Lighting Robotics Telecom

• • • • • •

Automation Packaging Diagnostic Sensing Military Automotive

• • • • • •

Food & Beverage Marine Medical Traffic Pharmaceutical Transportation

Other Products / Index

Request Your Catalog Today: 800-456-9012 / 303-699-1135 /info@sealconusa.com

ISO 9001:2000

2D / 3D CAD Available!

Nylon Strain Relief

Other Products Cable Glands for Hazardous / Explosion Areas

your Source for Armored & Non-Armored Solutions

Nickel Plated Brass PVDF / Steel

Armored Solutions

Accessories

• Silicone Seals • Fewer Parts • Secured Interlocking Armor Cone

Adapter,Reducer,Enlarger

• Fewer Sizes for Max. Clamping Range • Meets the Lastest ATEX / IECEx Standards

Non-Armored Solutions Ex- e A p p r ove d

Ex -d A p p r ove d

Conduit System

Intrinsically Safe

(Nylon / Nickle Plated Brass)

(Blue)

A2 / A2F

Stainless Steel / Nickel Plated Brass

Technical Information

Standard / Elongated Threads

Accessories

Multi-Hole / Romex ®*

(High Performance)

(Nylon / Nickle Plated Brass)

*ROMEX ® - Registered Trademark of the Southwire Company

Hole Plugs

Hex Plugs

Reducers

Setting Standards

Other Products / Index

Clamping (MZ)

A cessories Accessories

PVDF / Steel

Nickel Plated Brass

Nylon Strain Relief

Other Products Cable Glands for Hazardous / Explosion Areas Cab s

Conduit C onduit S System

Adapter,Reducer,Enlarger

• We Can Cross: Hawke, Peepers, CMP, Capri, RCN, etc. • Exios Available In: Nickel Plated Brass, Nickel Plated Brass Thread and Stainless Steel

Technical Information

• Industries Served: On/Off Shore Oil & Gas, Refineries, Mining, Marine, Chemical Plants, Military/Navy, Fluid Control, Panel Shops, Textile Mills, Paint Manufacturing, Pharma, Agriculture, Etc.

Other Products / Inde Index

Most of our standard Strain Relief Fittings are available with EX / ATEX approvals. For more information, please visit our website: http://www.sealconusa.com/hazard/hazard_product_selection.html or call our Customer Service for assistance: 1-800-456-9012.

Nylon Strain Relief

Other Products Industrial Enclosure Solutions Materials: • ABS (Acryl-Butadiene-Styrene) • Polystyrene • Stainless Steel

• EMI Proof Polycarbonate • Aluminum

Nickel Plated Brass

• PC (Polycarbonate) • Polyester • Powder-coated Steel

Features: • Square / rectangle shape • Solid and transparent lids (PC & ABS) • Smooth walls or PG/Metric knockouts • Extension Frames (Large PC/ABS) • Knockout & Membrane Flanges (Large PC/ABS) (Medium PC/ABS) • Hinges & Latches (PC) • EMI Shielding (PC EMI) • Accessories: Mounting Plates, DIN Rails, Lugs, Clips, Screws, Key, etc. We will be happy to help you choose the correct enclosure for your application. We also provide customization by replacing standard parts with special options.

PVDF / Steel

Hinged / Latched

Drilling and Cutting We perform customized machining such as cutting, drilling, threading and countersinking according to drawings. Assembly

Accessories

The enclosures can be equipped with: • Cable glands • Flanges • Circular connectors • DIN Rails • Mounting Plates • Hinges, etc. Print

Adapter,Reducer,Enlarger

Company logos, operating instructions and picture symbols can easily be silk screen printed on the enclosures. The enclosures feature a clean and functional style.

Stainless Steel & Powder-coated Steel

Color Service In addition to the standard gray color, we also offer other color options. For large series, dyed raw material is the most cost-effective color option. Small series can be painted according to the RAL color scale. We offer total solutions! • Flexible • Economical

akes rvice m Our se ifference! the d

Conduit System

• Creative

We offer one stop shopping. Accessories: Extension Frames, Mounting Plates, DIN Rails, Flanges, Screws, etc

For custom solutions please provide drawing. The factory will quote based on those specs. Allow adequate time for first delivery.

Technical Information

Gray or Transparent Covers Functional Integrity Polycarbonate / Polystyrene

Offshore Applications

EMI Proof Polycarbonate

No Minimum Orders!

Other Products / Index

Explosion Proof

Request Your Catalog Today: 800-456-9012 / 303-699-1135 info@sealconusa.com

Large variety of Sizes!

Nylon Strain Relief

Index / Cross Reference

Other Products / Index

Technical Information

Conduit System

Adapter,Reducer,Enlarger

Accessories

PVDF / Steel

Nickel Plated Brass

www.sealconusa.com

Sealcon Part Numbers

Hummel Part Numbers

Hummel Description

Sealcon Page Nr.

Sealcon Part Numbers

Hummel Part Numbers

Hummel Description

Sealcon Page Nr.

AF-xxxx-BK AF-xxxx-BR AG-xxxx-BK AG-xxxx-BR /-AL AM-xxxx-BK AM-xxxx-BR AN-xxxx-BR AP-xxxx-BK AP-xxxx-BR AT-xxxx-BR CDxxAA-BE CDxxAA-BK /-GY CDxx-AA-BR CDxxAA-CP CDxxAA-FE CDxxAA-MZ CDxxAA-RV CDxxAA-SS CDxxAA-SV CDxxAA-TE CDxxAP-BK /-GY CDxxAP-BR CDxxAR-BE CDxxAR-BK /-GY CDxx-AR-BR CDxxAR-RV CDxxAR-SS CDxxAR-SV CDxxAR-TE CDxxAS-A1 CDxxAS-01 /-04 CDxxAW-BR CDxxAx-BK /-GY CDxxAx-BR CDxxBA-BK /-GY CDxxBR-BK /-GY CDxxCA-BE CDxxCA-BK /-GY CDxx-CA-BR CDxxCA-MZ CDxxCA-RV CDxxCR-BE CDxxCR-BK /-GY CDxx-CR-BR CDxxCR-RV CDxxDA-BE CDxxDA-BK /-GY CDxx-DA-BR CDxxDA-FE CDxxDA-MZ CDxxDA-RV CDxxDR-BE CDxxDR-BK /-GY CDxx-DR-BR CDxxDR-FE CDxxDR-MZ CDxxDR-RV CDxxGA-BK /-GY CDxxGR-BK /-GY CDxx-LA-BK /-GY CDxxLP-BK /-GY CDxxLP-BR CDxx-LR-BK /-GY CDxxLx-BR CDxxMA-BE CDxxMA-BK /-GY

1.239 / 1.273 1.039 1.171 1.171 1.239 / 1.273 1.039 1.691 1.209 1.609 1.215 1.631 1.690 1.699 1.695 1.696 1.299 1.597 1.697 1.691 1.209 1.609 1.699 1.695 1.696 1.299 1.587 1.587 1.112 1.597 1.697 1.591 1.591 1.691 1.209 1.609 1.690 1.699 1.691 1.209 1.609 1.699 1.691 1.209 1.609 1.631 1.690 1.699 1.691 1.209 1.609 1.631 1.690 1.699 1.590 1.590 1.209 1.597 1.697 1.209 1.697 1.691 1.209

E-M-PA / R-M-PA RE-Ms RE-Ms RE-Ms E-M-PA / R-M-PA RE-Ms HSK-M-EMV HSK-K HSK-M HSK-K-MZ HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-Multi HSK-M-Multi HSK-M-EMV HSK-K HSK-M HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-FLAKA HSK-K-FLAKA HSK-MINI-M HSK-K-Multi HSK-M-Multi HSK-KR HSK-KR HSK-M-EMV HSK-K HSK-M HSK-MZ HSK-M-PVDF HSK-M-EMV HSK-K HSK-M HSK-M-PVDF HSK-M-EMV HSK-K HSK-M HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-M-EMV HSK-K HSK-M HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-KE HSK-KE HSK-K HSK-K-Multi HSK-M-Multi HSK-K HSK-M-Multi HSK-M-EMV HSK-K

35 34 35 34 35 34 34 35 34 34 20 4 14 9 21 17 26 27 27 25 10 22 20 4 14 26 27 27 25 9 9 15 10 22 7 7 20 6 16 17 26 20 6 16 26 20 6 16 21 17 26 20 6 16 21 17 26 7 7 4 11 23 4 23 20 5

CDxx-MA-BR CDxxMA-CP CDxxMA-FE CDxxMA-MZ CDxxMA-RV CDxxMA-SS CDxxMA-SV CDxxMA-TE CDxxMP-BK /-GY CDxxMP-BR CDxxMR-BE CDxxMR-BK /-GY CDxx-MR-BR CDxxMR-MZ CDxxMR-RV CDxxMR-SS CDxxMR-SV CDxxMR-TE CDxxMS-A1 CDxxMS-01 /-04 CDxxMW-BR /-RV CDxxMx-BK /-GY CDxxMx-BR CDxxNA-BE CDxxNA-BK /-GY CDxx-NA-BR CDxxNA-FE CDxxNA-MZ CDxxNA-RV CDxxNA-6S CDxxNA-6V CDxxNA-TE CDxxNP-BK /-GY CDxxNP-BR CDxxNR-BE CDxxNR-BK /-GY CDxx-NR-BR CDxxNR-RV CDxxNR-SS CDxxNR-SV CDxxNR-TE CDxxNS-A1 CDxxNS-01 /-04 CDxxNx-BK /-GY CDxxNx-BR CFxxAA-BE CFxxAA-BK /-GY CFxx-AA-BR CFxxAA-TE CFxxAP-BR CFxxAR-BE CFxxAR-BK /-GY CFxx-AR-BR CFxxAR-TE CFxxAx-BR CFxxBA-BK /-GY CFxxBR-BK /-GY CFxxCA-BE CFxxCA-BK /-GY CFxx-CA-BR CFxxCR-BE CFxxCR-BK /-GY CFxx-CR-BR CFxxDA-BE CFxxDA-BK /-GY CFxx-DA-BR

1.609 1.215 1.631 1.690 1.699 1.695 1.696 1.299 1.597 1.697 1.691 1.209 1.609 1.690 1.699 1.695 1.696 1.299 1.587 1.587 1.106 1.597 1.697 1.691 1.209 1.609 1.631 1.690 1.699 1.695 1.696 1.299 1.597 1.697 1.691 1.209 1.609 1.699 1.695 1.696 1.299 1.587 1.587 1.597 1.697 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623 1.594 1.594 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623

HSK-M HSK-K-MZ HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-Multi HSK-M-Multi HSK-M-EMV HSK-K HSK-M HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX-PVDF HSK-K-PVDF HSK-K-FLAKA HSK-K-FLAKA HSK-MINI-M HSK-K-Multi HSK-M-Multi HSK-M-EMV HSK-K HSK-M HSK-M-EMV-D HSK-MZ HSK-M-PVDF HSK-INOX HSK-INOX HSK-K-PVDF HSK-K-Multi HSK-M-Multi HSK-M-EMV HSK-K HSK-M HSK-M-PVDF HSK-INOX HSK-INOX HSK-K-PVDF HSK-K-FLAKA HSK-K-FLAKA HSK-K-Multi HSK-M-Multi HSK-M-Flex-EMV HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-M-Flex-EMV HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-KR-Flex HSK-KR-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex

14 9 21 17 26 27 27 25 12 24 20 5 14 17 26 27 27 25 9 9 15 12 24 20 4 14 21 17 26 27 27 25 11 23 20 4 14 26 27 27 25 9 9 11 23 20 4 14 25 22 20 4 14 25 22 7 7 20 6 16 20 6 16 20 6 16

Nylon Strain Relief

Index / Cross Reference www.sealconusa.com

Sealcon Page Nr.

CFxxDR-BE CFxxDR-BK /-GY CFxx-DR-BR CFxxGA-BK /-GY CFxxGR-BK /-GY CFxxMA-BE CFxxMA-BK /-GY CFxx-MA-BR CFxxMA-TE CFxxMP-BR CFxxMR-BE CFxxMR-BK /-GY CFxx-MR-BR CFxxMR-TE CFxxMx-BR CFxxNA-BK /-GY CFxx-NA-BR CFxxNA-TE CFxxNP-BR CFxxNR-BK /-GY CFxx-NR-BR CFxxNR-TE CFxxNx-BR CXxxGx-BR CXxxMx-BR DM-xx-BK /-GY DM-xx-BR DM-xx-BR-B DP-xx-BK /-GY DP-xx-BR DP-xx-BR-B DSxxAA-BK DSxxMA-BK DSxxNA-BK DUOxxAA-BK DUOxxAA-BR DUOxxAR-BK DUOxxAR-BR DUOxxMA-BK DUOxxMA-BR DUOxxMR-BK DUOxxMR-BR EDxxAA-BK /-GY EDxxAA-BR EDxxAR-BK /-GY EDxxAR-BR EDxxFA-BR EDxxFR-BR EDxxMA-BK /-GY EDxxMA-BR EDxxMR-BK /-GY EDxxMR-BR EDxxNA-BK /-GY EDxxNR-BK /-GY EFxxAA-BK /-GY EFxxAR-BK /-GY EFxxMA-BK /-GY EFxxMR-BK /-GY EFxxNA-BK /-GY EFxxNR-BK /-GY EMxxAA-BK EMxxMA-BK EMxxNA-BK EM-xxxx-BK EM-xxxx-BR EN-xxxx-BR

1.624 1.293 / 1.294 1.623 1.593 1.593 1.624 1.293 / 1.294 1.623 1.624 1.293 / 1.294 1.623 1.293 / 1.294 1.623 1.293 / 1.294 1.623 1.106 1.106 1.251 1.052 1.052 1.251 1.052 1.052 1.224 1.224 1.224 1.543 1.548 1.543 1.548 1.542 1.547 1.542 1.547 1.313 1.309 1.313 1.309 1.309 1.309 1.313 1.309 1.313 1.309 1.313 1.313 1.314 1.314 1.314 1.314 1.314 1.314 1.513 1.513 1.513 1.239 1.033 -

HSK-M-Flex-EMV HSK-Flex HSK-M-Flex HSK-KE-Flex HSK-KE-Flex HSK-M-Flex-EMV HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-M-Flex-EMV HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-Flex HSK-M-Flex needs to be built needs to be built HSK-XL HSK-XL V-N-FS V-N-Ms V-N-Ms-SD V-N-FS V-N-Ms V-N-Ms-SD HSK-EH HSK-EH HSK-EH Snapclic-DUO-PA Snapclic-DUO-Ms Snapclic-DUO-PA Snapclic-DUO-Ms Snapclic-DUO-PA Snapclic-DUO-Ms Snapclic-DUO-PA Snapclic-DUO-Ms HSK-W HSK-M-W HSK-W HSK-M-W HSK-M-W HSK-M-W HSK-W HSK-M-W HSK-W HSK-M-W HSK-W HSK-W HSK-W-Flex HSK-W-Flex HSK-W-Flex HSK-W-Flex HSK-W-Flex HSK-W-Flex SM-W SM-W SM-W E-M-PA E-Ms -

20 6 16 7 7 20 5 14 25 24 20 5 14 25 24 4 14 25 23 4 14 25 23 15 15 31 31 31 31 31 31 44 44 44 43 43 43 43 43 43 43 43 8 17 8 17 17 17 8 17 8 17 8 8 8 8 8 8 8 8 41 41 41 39 39 39

EP-xxxx-BR ETxxAA-BK ETxxNA-BK FL-xx-BK FT-xx-BK HM-xx-BK HM-xx-BR HM-xx-BR-B HM-xx-BR-V HM-xx-SS-B HM-xx-SS-S HM-xx-SS-V HN-xx-BK HP-xx-BK HP-xx-BR HP-xx-BR-B HP-xx-BR-V HP-xx-SS-B HP-xx-SS-S HP-xx-SS-V KLxxAA-BR KLxxMA-BR MB-xx-BK NG-xx-XL NM-xx-BE NM-xx-BK /-GY NM-xx-BR NM-xx-XL NN-xx-BE NN-xx-BK /-GY NN-xx-BR NN-xx-ST NP-xx-BE NP-xx-BK /-GY NP-xx-BR OM-xx-BN /-VT OM-xx-SI OR-xx-BN /-VT OR-xx-SI PL-xx-BK R-0x00 RB-xxxx-02 RM-xxxx-BK RM-xxxx-BR RM-xxxx-SS RM-xxxx-SS-B RM-xxxx-SS-S RM-xxxx-SS-V RN-xxxx-BR RP-xxxx-BR RP-xxxx-SS RQ-xxxx-BR RQ-xxxx-SS RQ-xxxx-SS-S RQ-xxxx-SS-V RR-xxxx-BR RR-xxxx-GY R-xxxx-WR SMxxAA/MA-BK SMxxNA-BK SM-xx-NY /-HD SM-xxxx-BK SM-xxxx-HY SR-xx-NY /-HD STxxAA/NA-BK S-xxx-WR

1.033 1.223 1.223 1.312 1.312 1.255 1.155 1.156 1.157 1.152 1.154 1.153 1.255 1.155 1.156 1.157 1.152 1.154 1.153 1.143 1.143 1.724 1.106 1.167 1.262 1.161 1.161 1.262 1.161 1.167 1.262 1.161 1.321 1.321 1.321 1.321 1.280 1.501 1.273 1.077 1.094 1.097 on request on request 1.074 1.094 1.077 1.097 on request on request 1.071 / 1.076 1.236 / 1.272 1.501 1.511 1.511 1.325 1.510 1.524 1.325 1.220 1.500

E-Ms EH-W EH-W KF-G KF-W V-NE V-NE-Ms V-NE-Ms-SD V-NE-Ms-FPM V-INOX V-INOX V-INOX V-NE V-NE-Ms V-NE-Ms-SD V-NE-Ms-FPM V-INOX V-INOX V-INOX KLE KLE UH GM-Ms (XL) GM-EMV GM-FS GM-Ms GM-Ms (XL) GM-FS GM-Ms GM-EMV GM-FS GM-Ms O-Ring O-Ring - Silicone O-Ring O-Ring - Silicone HSK-V RS R-M-PA RSD-Ms RS-INOX RSD-INOX RSD-INOX RSD-INOX RS-Ms RS-INOX RSD-Ms RSD-INOX RSD-INOX RSD-INOX R-H R-FS RS SM-N SM-N Thread Seal Rings SM-WS-PA EH-HY Thread Seal Rings EH ST

39 42 42 44 44 31 31 31 31 32 32 32 31 31 31 31 31 32 32 32 32 32 40 15 29 29 29 15 29 29 29 29 29 29 29 30 30 30 30 30 33 37 37 36 38 38 38 38 36 36 38 36 38 38 38 36 37 33 41 41 30 40 40 30 42 33

Other Products / Index

Hummel Description

Technical Information

Hummel Part Numbers

Conduit System

Sealcon Part Numbers

Adapter,Reducer,Enlarger

Sealcon Page Nr.

Accessories

Hummel Description

PVDF / Steel

Hummel Part Numbers

Nickel Plated Brass

Sealcon Part Numbers

We Provide Customers with Cable Management Solutions! 2D/3D CAD Drawing for Viewing Specs! Most of our standard Strain Relief and Conduit Fittings are now available for CAD download. The links for each download can be found on the detailed product pages of our website. To start CAD download: 1. Find part number you are interested in based on your specs 2. Click on the part number on the right hand side 3. A new drop down will open, choose from the following download options: • 3D Download: IGES, STEP, SOLIDWORKS, SAT, PARASOLID • 2D Download: SLDDRW, PDF, DWG, DXF If we do not have the CAD model you are looking for, please feel free to contact our Inside Technical Sales for assistance. We’ll be happy to obtain the CAD model for you if possible.

Other catalogs & flyers available. Call for details...

Further information on the products presented here and everything else Sealcon has to offer can be found on our website:

www.sealconusa.com

Our website is consistently updated. Sealcon l catalogs are also available for download online.

14853 E. Hinsdale Ave. Centennial, CO 80112-4240 USA Toll Free: 800-456-9012 / 303-699-1135 Fax: 303-680-5344 Email: info@sealconusa.com Web: www.sealconusa.com 0511