Co2 laser cml 306(en)

Page 1

CML-306

CO2 Laser Fractional

Principle

Co2 Fractional laser system shoot a laser beam 10600nm which is then split into numbers of microscopic beams, producing tiny dot, or pixel-like treatment zones within the selected area of the skin, leaving the other zones within it perfectly intact. Therefore, the heat of laser only passes deeply through the fractional damaged area. This allows the skin to heal


much faster if the whole area was treated. During the skin self-resurfacing, a great number of collagen is produced for skin rejuvenation, eventually the skin will look much healthier and younger.

Application

1. Remove acne, acne scar, scar and so on; 2. Dispel wrinkle around the eyes, crow's-feet, and wrinkle formed by lack of water; 3. Effectively reduce the wrinkle on the face, forehead, the joints and striae gravidarum; 4. Dispel freckle, nevus zygomaticus and other spots formed by hyperchromic pathological changes; 5. Tighten skin and lift face; 6. Remove striae gravidarum and other deep scars

Before & After treatments


1. US- imported RF CO2 laser tube generator excellent performance ;

7 different output patterns , diagonal length of 0.1 mm to 20 mm adjustable


2. Excellent results of treatment, perfect recovery of the skin in a short time after treatment; 3. 10'' color touch screen , and normal fractional two moods

4. Fractional Model scar , wrinkles , acne scars , stretch marks , skin rejuvenation , etc.


5. Normal model medical surgery


Advantege: 1. Portable and stylish design , easy for movement and daily maintenance ; 2. Smaller focal point , high penetration and powerful energy output ; 3. The best performace cost , designed for beauty salons and clinics use ;

Technical Specification

AC 110VÂą 10% Electrical

60Hz

Beam 6 joint arm

Requirements AC 220VÂą 10%

Delivery

50Hz Wavelength 10600nm

Cooling

Air cooling


Aiming

Continuous, super pulse, 635nm

Output mode

wavelength

fractional

Focal Spot

Operating

Continuous, operation

mode

with, intermittent loading

0.2mm Diameter

Whether Power of ≤ 5mw

Preview or

Yes

Aiming Beam not 1ms-5000ms, every Times of

1th-20 th, every stepping

stepping 1ms

1th

Pulse Interval Pulse Width

scanning

0.1ms-10ms, every stepping 0.1ms

Scanning Free scan, sequence scan, maximum distance scan Mode 20W (30W, 40W optional) 1%-100%(adjustable), every Output Power stepping1% Output

Beeline, triangle, right square, rectangle, hexagon, rotundity,

Pattern

ellipse and so on

Spots Interval 0.1mm-2.6mm, every stepping 0.1mm Diagonal length from 0.1mm to 20mm is adjustable at Pattern Size random Machine 30KG weight

Packing weight

45kg


Machine size

65cm x 36cm x 31cm


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.