F.F. KGN 1000 HI-SPEED - 2 B.B. • Scocca in alluminio anodizzato • Bobina anodizzata in alluminio • Cuscinetti in acciaio inox sigillati • Regolatore di velocità • Settaggio digitale della profondità • Contametri digitale (mis. in mt) • Programmazione specifiche filo • Massima potenza di recupero 88 kg - 160 mt / min (spunto iniziale) • Funzione anti surriscaldamento
2 Cuscinetti - con guidafilo 2 Ball bearings - with line guide 2 Roulements - avec guide fil 2 Rodamientos - con guìa hilo
Size 1000
Min.Pack 2
• Anodized aluminium frame • Aluminium forged spool • Premium stainless steel ball bearings • Speed control clutch • Digital depth adjuster • Digital line counter (mt) • Line pre-setting • Instant maximum winding power 88 kg - 160 mt / min • No overheating function
! AVVERTENZE BATTERIA: PAGINA 6 BATTERY NOTICES: PAGE 6 NOTICEs BATTERIE: PAGE 6 advertencias BATERIA: PAGINA 6 Line Capacity Braid / Dyneema® pe/lbs 6/60 MT 1000 - 8/80 mt 800 - 10/100 MT 600 - 12/120 MT 500
Code 1837100
REELS
88 kg./cm. - 160 mt./min.
Weight gr. 1620
RATIO 2.8:1
REELS
F.F. KGN 500 TWIN MOTOR - 5 B.B.
W NE
50 kg./cm. - 230 mt./min. • 2 motori con funzioni distinte (velocità e potenza) • Motore della modalità potenza nel corpo • Motore della modalità velocità nella bobina • Modalità di regolazione velocità/potenza selezionabili con pulsante • Display 2 colori: rosso mod. velocità - verde mod. potenza • Sblocco bobina con tasto • Massima potenza di recupero 50 kg - 230 mt / min (spunto iniziale) • Cuscinetti in acciaio inox • Guarnizioni in carbonio
• 2 motors with different functions (speed & power) • Power mode motor inside body • Speed mode motor inside spool • Speed / power modes selectable with button • 2 colours display: red speed mode - green power mode • Thumb bar type spool unlocking • Instant maximum winding power 50 kg - 230 mt / min Stainless steel ball bearings • Carbon washers
ARTICOLO DISPONIBILE DA GENNAIO 2012 Item available from January 2012
5 Cuscinetti - con guidafilo 5 Ball bearings - with line guide 5 Roulements - avec guide fil
5 Rodamientos - con guìa hilo
Code 1837150
Size 500
Min.Pack 2
! AVVERTENZE BATTERIA: PAGINA 6 BATTERY NOTICES: PAGE 6 NOTICEs BATTERIE: PAGE 6 advertencias BATERIA: PAGINA 6 Line Capacity Braid / Dyneema® pe/lbs 4/40 mt 400 - 6/60 MT 300
Weight gr. 918
RATIO 3,2:1
F.F. KGN JIGGING FUNCTION - 2 B.B. REELS
30 kg./cm. - 190 mt./min.
Bobina forgiata in alluminio Aluminium forged spoo Bobine forgée en alluminium
Bobina forjada de aluminio Il mulinello elettrico KGN 500 “JIGGING FUNCTION” è stato creato appositamente per azioni di pesca leggera, a profondità tra i 100/150 mt. max, con artificiali leggeri. Per azioni di pesca pesante e ad elevate profondità, abbiamo invece il KGN 1000 (vedi pag. 3). The electric reel KGN 500 “JIGGING FUNCTION” has been especially created for light fishing actions at a depth of 100/150 mt. max, using light lures. For heavier fishing actions at higher depths, we propose you the electic reel KGN 1000 (page 3). Le moulinet électrique KGN 500 “JIGGING FUNCTION” a été conçu puor actions de pêche légèere, à des profondeurs allant de 100/150 mt. maximum, avec leurres légèeres. Puor actions de pêche lourde et à grandes profondeurs, on a aussi le moulinet KGN 100 (voir page 4). El carrete electrico KGN 500 “jigging function” ha sido creado para las acciónes de pesca ligera, con profundidad entre los 100/150 mt. maximos, con artificiales ligeros. Para acciónes de pesca mas pesadas y con mayor profundidad, tenemos el carrete Kgn 1000 (pag. 4).
2 Cuscinetti - con guidafilo 2 Ball bearings - with line guide 2 Roulements - avec guide fil 2 Rodamientos - con guìa hilo
Size 500
Min.Pack 4
sur la lève de la friction
Semi-automático: Para crear el movimiento vertical de la pesca Jigging hundir antes el butón “JIGGING FUNCTION” y luego en la palanca del freno
! AVVERTENZE BATTERIA: PAGINA 6 BATTERY NOTICES: PAGE 6 NOTICEs BATTERIE: PAGE 6 advertencias BATERIA: PAGINA 6 Line Capacity Braid / Dyneema® pe/lbs 4/40 mt 400 - 6/60 MT 300 - 8/80 MT 200
Weight gr. 690
Code 1837510
Semiautomatico: per creare il movimento vertical della pesca jigging premere il pulsante “JIGGING FUNCTION” per il rilascio del filo agendo poi sulla leva di frizione per il recupero Semi-automatic: the vertical jigging movement is performed by activating“JIGGING FUNCTION” button first and Clutch lever later Semi-automatique: pour créer le mouvement vertical de la pêche Jigging appuyer en avant l’interrupteur “JIGGING FUNCTION” et apres
RATIO 3,5:1
!
REELS
batteria per mulinelli elettrici KGN
AVVERTENZE: AVIS IMPORTANT: NON UTILIZZARE CON BATTERIE DA AUTO E DA BARCA. NE PAS UTILISER AVEC BATTERIES DE VEHICULES OU BATEAUX. FAIRE ATTENTION À FARE ATTENZIONE AI POLI, POSITIVO E NEGATIVO. L’INVERSION DES PÔLES, POSITIF ET NÉGATIF. Usare unicamente batterie da 12V con amperaggio da 7A a 12A massimo. Utiliser uniquement batteries à 12V avec ampérage de 7A à 12A maximum. La garanzia non copre guasti causati dall’uso di batterie con voltaggi e amperaggi La garantie ne couvre pas les degâts causées par l’utilise de batteries aux ampérages et diversi, o da errata connessione, ossia inversione dei poli che brucia immediatamente la voltages differents, aussi même pour incorrecte connexion, centralina ed il motore e verrà, per cui, addebitata la dispendiosa riparazione. due à une inversion des pôles. SI CONSIGLIA L’USO DELLA BATTERIA LINEAEFFE DA 12V E 12A. ON CONSEIL L’UTILISE DE NOTRE BATTERIE LINEAEFFE DE 12V ET 12A. WARNING: DO NOT USE WITH CAR OR BOAT BATTERIES. PAY ATTENTION TO POSITIVE AND NEGATIVE POLES. Use 12v and from 7 Ato 12A max batteries only. The warranty does not cover any damage caused by the use of batteries with different amperages, voltages and wrong connection (inversion of poles). WE ADVICE THE USE OF 12V 12A LINEAEFFE BATTERY.
Art. 1837100/B
7100/B
Art. 183
ADVERTENCIAS: NO UTILIZAR CON BATERIAS PARA COCHES NI BARCOS. PONER CUIDADO A LOS POLOS POSITIVO Y NEGATIVO Usar solo baterias de 12volt con amperaje de 7 a 12 amperios maximos. La garantia no incluye los daños causados por el uso de baterias con voltajes y amperajes diferentes, o por errada conexion o sea inversion de los polos, que quema de inmediato el circuito de control y el motor: en todos estos casos no sera cobrada la reparacion que resulta ser muy expensiva. SE ACONSEJA EL USO DE LA BATERIA LINEAEEFE DE 12V Y 12 A.
BATTERIA 12V 12A / Battery 12V 12A / batterie 12V 12A / Bateria 12V 12A (Min. q.ty 1 pc.)
TROLLING LD ADVANCED 1 SPEED - 4 B.B.
• Scocca monoblocco in grafite • Bobina in alluminio monoblocco • Ingranaggi torniti in acciaio inox • 4 cuscinetti a sfera in acciaio inox sigillati • Sistema di frizione in acciaio/carbonio • I modelli T20/T25/T30(L) includono gli agganci per la canna • Eccellente resistenza alla salsedine
Code 1834020 1834025 1834030
Size T 20 T 25 T 30
Min.Pack 4 4 4
• One piece lightweight graphite frame • One piece aluminium spool • CNC machine cut stainless steel gears • 4 sealed stainless steel ball bearings • Carbon/stainless drag system • T20/T25/T30(L) have rod clamps and wrenches included • Excellent salt water resistance
Line Capacity mm/Mt. 0,55=300 lbs/yds. 30=330 mm/Mt. 0,55=360 lbs/yds. 30=400 mm/Mt. 0,57=550 lbs/yds. 50=630 mm/Mt. 0,50=690 lbs/yds. 30=720
POWER 29 LBS. MAX 29 LBS. MAX 35 LBS. MAX
Weight gr. 816 829 1196
RATIO 3,8:1 3,8:1 3,1:1
W NE
TROLLING LD ADVANCED 2 SPEED - 4 B.B.
Size T 25 - II T 30 - II
Min.Pack 4 4
Line Capacity mm/Mt. 0,55=360 lbs/yds. 30=400 mm/Mt. 0,57=550 lbs/yds. 50=630 mm/Mt. 0,50=690 lbs/yds. 30=720
POWER 29 LBS. MAX 35 LBS. MAX
Weight gr. 829 1196
RATIO 3,8:1/1,5:1 3,8:1/1,4:1
W NE
Code 1834125 1834130
• DOUBLE WINDING SPEED • One piece lightweight graphite frame • One piece aluminium spool • CNC machine cut stainless steel gears • 4 sealed stainless steel ball bearings • Carbon/stainless drag system • T25/T30(L) have rod clamps and wrenches included • Excellent salt water resistance
REELS
• DOPPIA VELOCITA’ DI RECUPERO • Scocca monoblocco in grafite • Bobina in alluminio monoblocco • Ingranaggi torniti in acciaio inox • 4 cuscinetti a sfera in acciaio inox sigillati • Sistema di frizione in acciaio/carbonio • I modelli T25/T30(L) includono gli agganci per la canna • Eccellente resistenza alla salsedine
REELS
KAM ADVANCED - 4 B.B. • Scocca monoblocco tornita • Coperture laterali forgiate a freddo • 4 cuscinetti a sfera in acciaio inox • Frizione a leva con sistema di controllo programmabile • Misure 16 e 22 senza traversina superiore • Pomello ergonomico in gomma termoplastica • Eccellente resistenza alla salsedine • Sistema di frizione in acciaio/carbonio
Code 1838016 1838022 1838031
Size S 16 S 22 S 30
Min.Pack 4 4 4
W NE
• One piece CNC machine-cut frame • Cold forged side plates • 4 stainless steel bearings • Lever drag with preset control system • Topless frame design for 16/22 size • Tpr ergonomic handle knob • Excellent salt water resistance • Carbon/stainless drag system
Line Capacity mm/Mt. 0,45=360 lbs/yds. 20=400 mm/Mt. 0,45=520 lbs/yds. 20=580 mm/Mt. 0,57=550 lbs/yds. 50=630 mm/Mt. 0,50=690 lbs/yds. 30=720
POWER 30 LBS. MAX 35 LBS. MAX 44 LBS. MAX
Weight gr. 792 1189 1585
RATIO 4,2:1 3,8:1 3,1:1
XERION TROLLING ALUMINIUM - 1+1 B.B. REELS Frizione a stella extra-strong Extra-strong star drag Frein à étoile
Freno a estrella extra-strong
Corpo e Bobina in Alluminio Aluminium Body & Spool Bobine et corps en Alluminium
Bobina y cuerpo DE Aluminio 2 Cuscinetti - senza guidafilo 2 Ball bearings - without line guide 2 Roulements - sans guide fil 2 Rodamientos - sin guìa hilo
Code 1836550
Size 50
Min.Pack 20
Line Capacity mm/Mt. 0,50=608/0,55=528 lbs/yds. 25=660/30=580
Weight gr. 860
RATIO 4,1:1
RAPID® LEVER DRAG - 8 B.B.
Frizione a leva da combattimento Fighting lever drag
Frein de combat à levier
Bobina in Alluminio Aluminium Spool Bobine en Alluminium
Freno de leva de combate
Bobina en Aluminio
8 Cuscinetti - senza guidafilo 8 Ball bearings - without line guide 8 Roulements - sans guide fil 8 Rodamientos - sin guìa hilo
Size 4000
Min.Pack 20
Line Capacity mm/Mt. 0,50=620/0,55=510/0,60=430 lbs/yds. 18=675/20=560/22=470
Weight gr. 800
RATIO 3,4:1
Code 1834300
REELS
TROLLING LINE COUNTER 30 - 2 B.B. sistema di conteggio in Mt. counter display in Mt. visualisation en Mt. visualizaci贸n en Mt.
Bobina in Alluminio Aluminium Spool Bobine en Alluminium Bobina en Aluminio
2 Cuscinetti - con guidafilo 2 Ball bearings - with line guide 2 Roulements - avec guide fil 2 Rodamientos - con gu矛a hilo
Code 1833030
Size 30
Min.Pack 20
Line Capacity mm/Mt. 0,35=590/ 0,40=450 lb/yds 13=650/16=490
Weight gr. 658
RATIO 4,4:1
TROLLING LINE COUNTER 20 - 1 B.B. sistema di conteggio in Mt. counter display in Mt. visualisation en Mt. visualizaci贸n en Mt.
Bobina in Grafite Graphite Spool Bobine en Carbone
Bobina en grafito 1 Cuscinetto - con guidafilo 1 Ball bearing - with line guide 1 Roulement - avec guide fil
10
1 Rodamiento - con gu矛a hilo
Code 1833020
Size 20
Min.Pack 20
Line Capacity mm/Mt. 0,35=500/0,40=380/0,45=300/0,50=230 lb/yds 13=550/16=420/21=330/25=250
Weight gr. 478
RATIO 4,8:1
GCT ALLUMINIO - 1 B.B. REELS
Bobina in Alluminio Aluminium Spool Bobine en Alluminium Bobina en Aluminio
1 Cuscinetto - con guidafilo 1 Ball bearing - with line guide 1 Roulement - avec guide fil 1 Rodamiento - con guìa hilo
Code 1835035 1835045
Size 30 45
Min.Pack 20 20
Line Capacity mm/Mt. 0,45=300 - lb/yds 20=330 mm/Mt. 0,50=330 - lb/yds 25=360
Weight gr. 504 520
RATIO 3,8:1 3,8:1
JD TROLLING - 1 B.B.
Bobina in Grafite - Filo inlcuso Graphite Spool - Spooled Line Bobine en Carbone - Nylon bobiné
Bobina en Grafito - Hilo INCLUIDO 1 Cuscinetto - con guidafilo 1 Ball bearing - with line guide 1 Roulement - avec guide fil 1 Rodamiento - con guìa hilo
Size 300
Min.Pack 10
1836350
500
10
Line Capacity mm/Mt. 0,40=420/0,45=330/0,50=270 lbs/yds 15=460/18=360/20=300 mm/Mt. 0,50=480/0,52=420/0,60=300 lbs/yds 20=520/25=460/30=330
Weight gr. 520
RATIO 4,2:1
739
5,2:1
11
Code 1836330
REELS
FF REX - 7+1 B.B. • 7+1 cuscinetti a sfera inox sigillati • Corpo e rotore interamente in alluminio extra • Ingranaggio tornito in acciaio inox • Bobina tornita in alluminio ad alta capacità • Manovella da combattimento tornita in metallo • Archetto cavo sovradimensionato • Potenza frizione 30 kg. • Frizione con dischi in carbonio T300 • Trattamento integrale anti salsedine • Sistema Worm-Shaft
• 7+1 stainless steel sealed bearings • High strength aluminium body and rotor • Precision machined cut stainless steel gear • High capacity aluminium CNC spool • Precision cut CNC power handle • Oversized hollow bail arm • Drag power 30 kg. • T300 carbon washers drag • Full saltwater treatment • Worm-Shaft System
W NE
Corpo in metallo Cuerpo de metal Metal body
8 Cuscinetti - 1 bobina alluminio 8 Ball bearings - 1 aluminium spool 8 Roulements - 1 bobine aluminium
12
8 Rodamientos - 1 bobina de aluminio
Code 1349770
Size 7000
Min.Pack 5
Line Capacity mm/Mt. 0,35=360/0,40=280/0,45=220 lbs/yds. 15=400/18=310/22=240
POWER 30 Kg. MAX
Weight gr. 834
RATIO 4.1:1
• Frizione multidisco interamente su carbonio • Cuscinetti in acciaio inox Made in Japan • Scorrifilo tornito • Albero interno in acciaio inox • Senza antiritorno • Pignone in ottone tornito e ingranaggio forgiato • Manovella tornita dal pieno con pomello in neoprene • Bobina in alluminio forgiata e tornita dal pieno
• Multidisc carbon washer drag • Japanese stainless steel ball bearings • Machine cut line roller • Stainless steel main shaft • Without antireverse system •Machine cut brass pinion and forged brass gear • Machined from solid handle with EVA knob • Forged and machined from solid aluminium spool
W NE
REELS
XTREME GT - 6+1 B.B. Drag power: 25 Kg.
Corpo in metallo Cuerpo de metal Metal body
7 Cuscinetti - 1 bobina alluminio 7 Ball bearings - 1 aluminium spool 7 Roulements - 1 bobine aluminium
Misura 5000 senza sblocco antiritorno - Misura 3000 con sblocco antiritorno Size 5000 without antireverse lock - Size 3000 with antireverse lock Mesure 5000 sans bloc antireverse - Mesure 3000 avec bloc antireverse
7 Rodamientos - 1 bobina de aluminio
Size 3000 5000
Min.Pack 10 10
Med. 5000 sin bloque antiretraso - med. 3000 con bloque antiretraso
Line Capacity mm/Mt. 0,35=330/0,40=250/0,45=200 mm/Mt. 0.40=340/0.47=270/0.52=200
POWER 25 KG MAX 25 KG MAX
Weight gr. 570 644
RATIO 4.8:1 4.7:1
13
Code 1349830 1349881
REELS
CARBOREX BOAT - 7+1 • 7+1 cuscinetti a sfera inox sigillati • Corpo e rotore interamente in alluminio extra • Ingranaggio tornito in acciaio inox • Bobina tornita in alluminio ad alta capacità • Manovella a vite fissa • Archetto sovradimensionato • Frizione con dischi in carbonio • Trattamento integrale anti salsedine • Sistema Worm-Shaft • Rotore rinforzato in carbonio
• 7+1 stainless steel sealed bearings • High strength aluminium body and rotor • Precision machined cut stainless steel gear • High capacity aluminium CNC spool • Fixed screw handle system • Oversized bail arm • Carbon washers drag • Full saltwater treatment • Worm-Shaft System • Reinforced carbon rotor
Corpo in metallo Cuerpo de metal Metal body
14
8 Cuscinetti - 2 bobine alluminio 8 Ball bearings - 2 aluminium spools 8 Roulements - 2 bobines aluminium 8 Rodamientos - 2 bobinas de aluminio Code 1342780
Size 80
Min.Pack 20
Line Capacity MM/M. 0.30=470/0.35=350/0.40=270 LBS=YDS. 15=290/18/250/20=210
POWER 20Kg. max
Weight gr. 781
RATIO 4.4:1
W NE
F.F. CARBOREX ALU FD - 11+1 B.B. Drag power: 20 Kg. REELS
• Frizione multidisco interamente su carbonio • Cuscinetti in acciaio inox Made in Japan • Albero interno in acciaio inox • Doppio sistema di antiritorno Ratchet • Antiritorno infinito ultra resistente • Ingranaggio dell’oscillatore in ottone • Sistema anti sfilamento della bobina • Bobina in alluminio con inserti in carbonio • Sistema Worm-Shaft
• Multidisc carbon washer drag • Japanese stainless steel ball bearings • Stainless steel main shaft • Ratchet double antireverse • Extra strong one way clutch • Brass drive oscillation gear • Safety spool shaft • Aluminium spool with carbon inserts • Worm-Shaft system
Corpo in metallo Cuerpo de metal Metal body Metal Spool With Carbon Stripe
12 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 12 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 12 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 12 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 70
Min.Pack 20
Line Capacity mm/Mt. 0,35=400/0,40=310/0,50=180 LBD./YDS. 20=250/25=195/30=160
Weight gr. 485
RATIO 5.2:1
15
Code 1349570
REELS
F.F. CARBOREX GRA FD - 7+1 B.B. Drag power: 20 Kg. • Frizione multidisco interamente su carbonio • Cuscinetti in acciaio inox Made in Japan • Albero interno in acciaio inox • Doppio sistema di antiritorno Ratchet • Antiritorno infinito ultra resistente • Ingranaggio dell’oscillatore in ottone • Sistema anti sfilamento della bobina • Bobina in alluminio con inserti in carbonio • Sistema Worm-Shaft
• Multidisc carbon washer drag • Japanese stainless steel ball bearings • Stainless steel main shaft • Ratchet double antireverse • Extra strong one way clutch • Brass drive oscillation gear • Safety spool shaft • Aluminium spool with carbon inserts • Worm-Shaft system
Metal Spool With Carbon Stripe
8 Cuscinetti - 1 bobina in alluminio + 1 bobina di ricambio in grafite inclusa 8 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 8 Roulements - 1 bobine alluminium + 1 bobine supplementaire carbone 8 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 50
Min.Pack 20
1349470
70
20
16
Code 1349450
Line Capacity mm/Mt. 0,35=180/0,40=140/0,50=100 LBD./YDS. 12=185/15=155/20=120 mm/Mt. 0,35=400/0,40=310/0,50=180 LBD./YDS. 20=250/25=195/30=160
Weight gr. 406
RATIO 5.2:1
445
5.2:1
REELS
Deep waters design Drag power: 10 Kg.
DEEP JIG - 5+1 B.B.
6 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 6 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 6 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 6 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 60
Min.Pack 20
1351070
70
20
1351080
80
20
1351090
90
20
Line Capacity mm/Mt. 0,45=195/0,50=155/0,60=110 lbs/yds 18=215/20=170/35=120 mm/Mt. 0,40=270/0,50=180/0,60=130 lbs/yds 15=295/20=195/35=140 mm/Mt. 0,40=335/0,50=225/0,60=160 lbs/yds 15=365/20=245/35=175 mm/Mt. 0,40=390/0,50=250/0,60=195 lbs/yds 15=425/20=275/35=190
Weight gr. 415
RATIO 5,2:1
560
4,1:1
665
4,1:1
685
4,1:1
17
Code 1351060
REELS
F.F. STYLUM SURF - 13+1 B.B. Slow oscillation spool system Drag power: 10 Kg.
14 Cuscinetti - 1 bobina in alluminio + 1 bobina match in alluminio inclusa 14 Ball bearings - 1 aluminium spool + 1 extra aluminium match spool included 14 Roulements - 1 bobine alluminium + 1 bobine match supplementaire en alluminium 14 Rodamientos - 1 bobina de aluminio + 1 bobina match suplementaria de aluminio incluida
Code 1342700
SPOOL Size 7000 Match
Min.Pack 10
Line Capacity mm/Mt. 0,30=480/0,35=360/0,40=280 mm/Mt. 0,35=250
Weight gr. 630
RATIO 4,7:1
F.F. STYLUM BOAT 5+1 B.B. Slow oscillation spool system Drag power: 10 Kg.
18
6 Cuscinetti - 1 bobina in alluminio 6 Ball bearings - 1 aluminium spool 6 Roulements - 1 bobine alluminium 6 Rodamientos - 1 bobina de aluminio
Code 1342705
Size 7000
Min.Pack 10
Line Capacity mm/Mt. 0,30=480/0,35=360/0,40=280
Weight gr. 560
RATIO 3,7:1
ETX ADVANCED - 4 B.B.
W NE
• Anti vibration system • Sharp stop anti reverse system • Anti reverse always locked • Fixed screw handle system • Salt water treatment • Big line roller • Stainless steel main shaft • Brass pinion • Metal body
REELS
• Sitema anti vibrazione • Antiritorno Sharp Stop • Senza sblocco antiritorno • Manovella a vite fissa • Trattamento anti-salsedine • Rullino scorrifilo maggiorato • Albero principale in acciaio inox • Pignone in ottone • Corpo in metallo
Corpo in metallo Cuerpo de metal Metal body
4 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 4 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 4 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 4 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 60 70
Min.Pack 20 20
Line Capacity mm/Mt. 0,40=260/0,50=170/0,60=165 mm/Mt. 0,40=310/0,50=200/0,60=120
Weight gr. 670 700
RATIO 4,0:1 4,0:1
19
Code 1341460 1341470
AQUAREX BOSS - 4+1 B.B. REELS
HI-RESISTANCE CONSTRUCTION
• Antiritorno infinito • 2 bobine in alluminio • Sistema worm-shaft • Trattamento anti-salsedine • Materiali ad alta resistenza • Archetto sovradimensionato • Rullino scorrifilo maggiorato • Sistema di sicurezza per il filo • Manovella da combattimento in metallo
W NE
• One way clutch • 2 aluminium spools • Worm shaft • Salt water treatment • Hi- resistence construction • Oversize bail arm • Big line roller • Line safety system • Metal CNC fighting handle
5 Cuscinetti - 2 bobine in alluminio 5 all bearings - 2 aluminium spool 5 Roulements - 2 bobines aluminium
20
5 Rodamientos - 2 bobinas de aluminio
Code 1346170
Size 70
Min.Pack 20
Line Capacity mm/Mt. 0.40/345 0.50/220 0.60/155 LBS/YDS. 15/375 20/240 35/170
Weight gr. 790
RATIO 4.1:1
THAROS FD 5+1 B.B. REELS
6 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 6 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 6 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 6 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 60
Min.Pack 20
1349080
80
20
Line Capacity mm/Mt. 0.30/449,0.40/243,0.50/154 lbs/yds 10=423/15=231/20=147 mm/Mt. 0.40/435,0.50/280,0.60/195 lbs/yds 15=475/20=305/35=215
Weight gr. 580
RATIO 5.2:1
740
4.1:1
21
Code 1349060
REELS
PH - 4+1 B.B.
1 BOBINA EXTRA IN GRAFITE A CAPACITA’ DIFFERENZIATA 1 EXTRA GRAPHITE SPOOL WITH DIFFERENT LINE CAPACITY 1 bobine supplementaire en carbone à différente capacité
1 Bobina suplementaria de grafito de diferente capacidad
5 Cuscinetti - 1 bobina alluminio mis. 100 + 1 bobina in grafite mis. 80 5 Ball bearings - 1 aluminium spool size 100 + 1 extra graphite spool size 80 5 Roulements - 1 bobine aluminium taille 100 + 1 bobine carbone taille 80 5 Rodamientos - 1 bobina de aluminio medida 100 + 1 bobina suplementaria de grafito incluida medida 80
Code 1348100
Size 100 80
Min.Pack 20
Line Capacity mm/Mt. 0,40=480/0,45=380/0,50=300 mm/Mt. 0,30=450/0,35=330/0,40=250
Weight gr. 756
RATIO 4,6:1
MATCH CAST- 4+1 B.B. W NE
5 Cuscinetti - 1 bobina alluminio + 1 bobina in grafite 5 Ball bearings - 1 aluminium spool + 1 extra graphite spool 5 Roulements - 1 bobine aluminium + 1 bobine carbone 5 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
22
Code 1347250 1347270
SPOOL Size 5000 MATCH 7000 7000 9000
Min.Pack 20 20
Line Capacity mm/Mt. 0.20/490 0.25/310 0.30/220 lbs/yds. 6/400 8/260 10/200 mm/Mt. 0,30/390 0,35/300 0,40/220 lbs/yds. 10/350 12/280 15/240 mm/Mt. 0.30/390 0.35/300 0.40/220 lbs/yds. 10/350 12/280 15/240 mm/Mt. 0,40/340 0,45/270 0,50/220 lbs/yds. 12/440 15/370 18/310
Weight gr. 540 526
RATIO 4.9:1 4.9:1 4.9:1 4.9:1
HIKARU FORCE - 5+1 b.b.
W NE
• 5+1 stainless steel ball bearings • Corrosion resistant graphite body and rotor • Computer balanced anti-vibrations rotor • Fixed screw handle system • Machined and anodized aluminium • Oversize bail arm • 1 extra graphite spool
REELS
• 5+1 cuscinetti a sfera in acciaio inox • Corpo e rotore in grafite resistenti alla corrosione • Rotore anti-vibrazione bilanciato al computer • Manovella a vite fissa • Bobina in alluminio tornito e anodizzato • Archetto sovradimensionato • 1 bobina in grafite di ricambio
6 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 6 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 6 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 6 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 6000 7000 8000
Min.Pack 20 20 20
Line Capacity mm/Mt. 0.40/255 0.50/165 0.60/115 LBS/YDS 15/250 20/180 35/125 mm/Mt. 0.40/345 0.50/220 0.60/155 LBS/YDS 15/375 20/240 35/170 mm/Mt. 0.40/385 0.50/245 0.60/170 LBS/YDS 15/420 20/270 35/185
Weight gr. 640 660 670
RATIO 4,0:1 4,0:1 4,0:1
23
Code 1346060 1346070 1346080
MATCH SURF - 4+1 B.B. REELS
W NE
5 Cuscinetti - 1 bobina alluminio match + 1 bobina in grafite deep 5 Ball bearings - 1 aluminium match spool + 1 extra graphite deep spool 5 Roulements - 1 bobine aluminium match + 1 bobine carbone deep
24
5 Rodamientos - 1 bobina de aluminio match + 1 bobina suplementaria de grafito deep
Code 1347360
Size 60
Min.Pack 20
Line Capacity MM/TM. 0.33=190/0.37=140/0.40=110 LBS/YDS. 16=190/20=140/25=110
Weight gr. 465 GR.
RATIO 5.6:1
DG SURF - 3+1 B.B. REELS
Filo inlcuso Spooled Line Nylon bobinĂŠ Hilo INCLUIDO
4 Cuscinetti - 1 bobina alluminio 4 Ball bearings - 1 aluminium 4 Roulements - 1 bobine aluminium 4 Rodamientos - 1 bobina match
Code 1344650
Size 60
Min.Pack 20
Line Capacity mm/Mt. 0,40=270/0,50=180/0,60=130 lbs/yds 15=295/20=195/35=140
Weight gr. 640
RATIO 4,1:1
VIGOR CAST FD - 3 B.B.
3 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 3 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 3 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 3 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 50
Min.Pack 20
1345160
60
20
1345170
70
20
Line Capacity mm/Mt. 0.45/135,0.50/110,0.60/75 lbs/yds. 18=150/20=120/35=80 mm/Mt. 0.40/255,0.50/165,0.60/115 lbs/yds. 15=250/20=180/35=125 mm/Mt. 0.40/345,0.50/220,0.60/155 lbs/yds. 15=375/20=240/35=170
Weight gr. 540
RATIO 5.2:1
560
4,1:1
700
4,1:1
25
Code 1345150
REELS
VIGOR® LN FD - 3 B.B. Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
3 Cuscinetti - 1 bobina grafite + 1 bobina di ricambio in grafite inclusa 3 Ball bearings - 1 graphite spool + 1 extra graphite spool included 3 Roulements - 1 bobine carbone + bobine supplementaire carbone 3 Rodamientos - 1 bobina de grafito + 1 bobina suplementaria de grafito incluida
Code 1231351
Size 50
Min.Pack 20
1231361
60
20
1231371
70
20
Line Capacity mm/Mt. 0.45=135/0.50=110/0.60=75 lbs/yds 18=150/20=120/35=80 mm/Mt. 0.40=255/0.50=165/0.60=110 lbs/yds 15=250/20=180/35=125 mm/Mt. 0,40=335/0,50=225/0,60=160 lbs/yds 15=365/20=245/35=175
Weight gr. 550
RATIO 5.2:1
630
5.2:1
620
4,1:1
VIGOR® SX LINE 70 - 1 B.B. Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
26
1 Cuscinetti - 1 bobina in grafite 1 Ball bearings - 1 graphite spool 1 Roulements - 1 bobine carbone 1 Rodamientos - 1 bobina de grafito
Code 1207270
Size 70
Min.Pack 20
Line Capacity mm/Mt. 0,40=345/0,50=220/0,60=155
Weight gr. 780
RATIO 4,1:1
W NE
AQUAREX aluminium triodrag - 4+1 B.B. • 4+1 ball bearings • One way clutch • Worm-shaft system • Free spool system • One extra graphite spool • Oversized bail arm • Ergonomic rubber knobs • All-aluminium body and rotor • Balanced double aluminium handle
W NE
REELS
• 4+1 cuscinetti a sfera • Anti-ritorno infinito • Sistema worm-shaft • Sistema a bobina libera • Bobina di riserva in grafite • Archetto sovradimensionato • Pomelli ergonomici in gomma • Corpo e rotore interamente in alluminio • Doppia manovella bilanciata in alluminio
Big carp reel
5 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 5 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 5 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 5 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 6000 7000 8000
Min.Pack 20 20 20
Line Capacity mm/Mt. 0.35/200 0.40/160 0.45/130 LBS/YDS.12/200 15/170 18/140 mm/Mt. 0.40/280 0.45/220 0.50/180 LBS/YDS. 15/300 18/260 20/220 MM/MT. 0.40/330 0.45/260 0.50/210 1 LBS/YDS. 5/350 18/300 20/260
Weight 482 GR. 628 GR. 619 GR.
RATIO 5.2:1 4.8:1 4.8:1
27
Code 1286160 1286170 1286180
REELS
BANAX HELICON 5+1 B.B. • 5+1 cuscinetti a sfera • Anti-ritorno infinito ultra lock • Sistema worm-shaft • Sistema a bobina libera • Bobina di riserva in grafite • Archetto sovradimensionato • Pomello ergonomico in gomma • Scorrifilo rivestito in titanio
• 5+1 ball bearings • Ultra lock one way clutch • Worm-shaft system • Free spool system • One extra graphite spool • Oversized bail arm • Ergonomic rubber knob • Titanium coated line roller
W NE
28
6 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 6 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 6 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 6 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1287960
Size 60
Min.Pack 20
Line Capacity mm/Mt. 0,33=290/0,37=230/0,41=190 LBS/YDS. 10=310/12=250/15=210
Weight gr. 442
RATIO 4,8:1
DEEP RUNNER 5+1 B.B. REELS
Big carp reel
6 Cuscinetti - 2 bobine alluminio 6 Ball bearings - 2 aluminium spools 6 Roulements - 2 bobines aluminium 6 Rodamientos - 2 bobinas de aluminio
Code 1286060 1286070 1286080
Size 60 70 80
Min.Pack 20 20 20
Line Capacity mm/Mt. 0,30=290/0,40=165/0,50=105 mm/Mt. 0,30=250/0,40=140/0,50=90 mm/Mt. 0,40=435/0,50=280/0,60=195
Weight gr. 514 554 803
RATIO 5,2:1 5,2:1 5,2:1
MATCH RUNNER 5+1 B.B.
1 BOBINA MATCH IN GRAFITE INCLUSA 1 EXTRA MATCH GRAPHITE SPOOL INCLUDED  1 bobine supplementaire match en carbone 1 Bobina suplementaria match de grafito INCLUIDA
6 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 6 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 6 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 6 RodaMIENTOS - 1 BOBINA DE ALUMINIO + 1 BOBINA SUPLEMENTARIA DE GRAFITO INCLUIDA
Size 40 50 60 65
Min.Pack 20 20 20 20
Line Capacity mm/Mt. 0.30=180 0.35=130 0.40=100 mm/Mt. 0.30=180 0.35=130 0.40=100 mm/Mt. 0.35=160 0.40=120 0.45=100 mm/Mt. 0.40=160 0.45=120 0.50=100
Weight gr. 361 480 480 480
RATIO 5,1:1 4.8:1 4.8:1 4.8:1
29
Code 1287540 1287550 1287560 1287565
REELS
pro team carp - 8+1 B.B. • Bobina libera • Anti-ritorno infinito • Bobina di riserva in grafite • Rullino scorrifilo maggiorato • Archetto sovradimensionato • Rotore bilanciato al computer • Bobina in alluminio alleggerita
W NE
• Free spool • One way clutch • One extra graphite spool • Big line roller • Oversized bail arm • Computer balanced rotor • Light aluminium spool
9 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 9 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 9 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone
30
9 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1287630 1287640 1287650 1287660
Size 30 40 50 60
Min.Pack 20 20 20 20
Line Capacity mm/Mt. 0.25/180 0.30/125 0.35/90 LBS/YDS 6/195 10/135 12/100 mm/Mt. 0.30/150 0.35/110 0.40/85 LBS/YDS 10/165 12/120 15/90 mm/Mt. 0.35/185 0.40/140 0.50/90 LBS/YDS 12/200 15/155 20/100 mm/Mt. 0.45/135 0.50/110 0.60/75 LBS/YDS 18/150 20/120 35/80
Weight gr. 370 390 480 500
RATIO 5.2:1 5.2:1 5.2:1 5.2:1
TANK - 3 B.B. REELS
3 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite 3 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 3 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 3 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito
Size 40 50 60 65
Min.Pack 10 10 10 10
Line Capacity mm/Mt. 0,25=250/0,30=215/0,35=170 mm/Mt. 0,25=420/0,30=310/0,35=190 mm/Mt. 0,30=380/0,35=325/0,40=220 mm/Mt. 0,30=510/0,35=415/0,40=320
Weight gr. 400 440 460 463
RATIO 5,2:1 5,2:1 5,2:1 5,2:1
31
Code 1287340 1287350 1287360 1287365
REELS
epx carp - 5+1 B.B. W NE
6 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 6 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 6 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 6 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1287840 1287850 1287860 1287865
Size 40 50 60 65
Min.Pack 20 20 20 20
Line Capacity mm/Mt. 0.25/210 0.30/150 0.35/110 lbs/yds. 6/260 8/180 10/130 mm/Mt. 0.30/230 0.35/170 0.40/130 lbs/yds. 8/270 10/210 12/160 mm/Mt. 0.40/160 0.45/120 0.50/100 lbs/yds. 10/260 12/210 15/175 mm/Mt. 0.45/190 0.50/160 0.55/130 lbs/yds. 18/230 20/200 25/165
Weight gr. 369 462 475 557
hyper carp - 3+1 B.B.
4 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 4 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 4 Roulements - 1 bobine aluminium + 1 bobine supplementaire en carbone 4 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito
Size 40
Min.Pack 20
1287760
60
20
32
Code 1287740
Line Capacity mm/Mt. 0.30/150 0.35/110 0.40/85 lbs/yds. 10/165 12/120 15/90 mm/Mt. 0.45/135 0.50/110 0.60/75 lbs/yds. 18/150 20/120 35/80
Weight gr. 374
RATIO 5.2:1
490
5.2:1
RATIO 5.1:1 4.9:1 4.9:1 4.9:1
W NE
FREE CARP - 2+1 B.B REELS
Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
3 Cuscinetti - 1 bobina in grafite 3 Ball bearings - 1 graphite spool 3 Roulements - 1 bobine carbone 3 Rodamientos - 1 bobina de grafito
CODE 1209061
SIZE 60
MIN.PACK 20
LINE CAPACITY mm/Mt. 0,45=150/0,50=120/0,60=80 lbs/yds 18=160/20=130/35=90
WEIGHT GR. 463
RATIO 5,2:1
VIGOR® CARP - 1 b.b.
1 Cuscinetto - 1 bobina in grafite + 1 bobina di ricambio in grafite inclusa 1 Ball bearing - 1 graphite spool + 1 extra graphite spool included 1 Roulement - 1 bobine carbone + 1 bobine supplementaire carbone 1 Rodamiento - 1 bobina de grafito + 1 BOBINA SUPLEMENTARIA DE GRAFITO INCLUIDA
SIZE 40 60
MIN.PACK 20 20
LINE CAPACITY mm/Mt. 0.30/185,0.35/135,0.40/105 mm/Mt. 0.45/140,0.50/115,0.60/80
WEIGHT GR. 340 610
RATIO 5,2:1 5.2:1
33
CODE 1287440 1287460
REELS
ELAN - 7+1 B.B. Bait Casting Reel
Manovella a Sinistra Left Handed
Corpo in metallo Cuerpo de metal Metal body • Doppio sistema di frizioni - magnetica e centrifuga • Bobina alleggerita in alluminio • Manovella, viti e pomelli in metallo anti usura. • Easy Flip system per lanciare con una sola mano
Easy Flip System
• Twin drag system - magnetic and centrifugal • Lightened aluminium spool • All aluminium handle, screws and caps • Easy Flip system enabling casts with just one hand
34
8 Cuscinetti - bobina in alluminio 8 Ball bearings - aluminium spool 8 Roulements - bobine alluminium 8 Rodamientos - bobina de aluminio
CODE 1830010
SIZE 5
MIN.PACK 20
LINE CAPACITY lbs/yds 12/125
WEIGHT GR. 237
RATIO 7.0:1
F.F. AVALON - 6 B.B REELS
Bait Casting Reel
Manovella a Sinistra Left Handed
Controllo magnetico della frizione Magnetic drag control Contrôle magnetique du frein Control magnético del freno
Frizione a stella di grande sensibilità e precisione Excellent sensible and precise star drag Frein à étoile de grande sensibilité et précision Freno de estrella sensible y preciso
6 Cuscinetti - bobina in alluminio 6 Ball bearings - aluminium spool 6 Roulements - bobine alluminium
35
6 Rodamientos - bobina de aluminio
CODE 1830004
SIZE 5
MIN.PACK 20
LINE CAPACITY lbs/yds 10=120/12/100/14=70
WEIGHT GR. 221
RATIO 6,2:1
REELS
BAITCASTING DE LUXE - 2+1 B.B. Bait Casting Reel
Frizione a stella di grande sensibilità e precisione Excellent sensible and precise star drag Frein à étoile de grande sensibilité et précision
Manovella a Sinistra Left Handed
Freno de estrella sensible y preciso
Controllo magnetico della frizione Magnetic drag control Contrôle magnetique du frein Control magnético del freno
3 Cuscinetti - bobina in alluminio 3 Ball bearings - aluminium spool 3 Roulements - bobine alluminium 3 Rodamientos - bobina de aluminio
CODE 1830005
SIZE 5
MIN.PACK 20
Bait Casting Reel
LINE CAPACITY mm/Mt. 0,24=220/0,29=150 lbs/yds 6=240/8=160
WEIGHT GR. 220
RATIO 6,2:1
M-CASTING 201 - 6+1 B.B.
Manovella a Sinistra Left Handed
7 Cuscinetti - bobina in alluminio 7 Ball bearings - aluminium spool 7 Roulements - bobine alluminium
36
7 Rodamientos - bobina de aluminio
CODE 1830008
SIZE 5
MIN.PACK 20
LINE CAPACITY mm/Mt. 0.35/140,12/120
WEIGHT GR. 300
RATIO 6,2:1
CLIFTON 101 - 1 B.B. REELS
Bait Casting Reel Manovella a Sinistra Left Handed
1 Cuscinetto - Bobina in alluminio 1 Ball bearing - Aluminium spool 1 Roulement - bobine en alluminium 1 Rodamiento - bobina de aluminio
CODE 1830007
SIZE 5
MIN.PACK 20
Bait Casting Reel
LINE CAPACITY mm/Mt. 0,25=190/0,28=150/0,30=120 lbs/yds 8=170/10=155/12=115
WEIGHT GR. 225
RATIO 6,1:1
BRIGHTON - 1 B.B.
Manovella a Destra Right Handed
1 Cuscinetto - Bobina in Grafite 1 Ball bearing - Graphite spool 1 Roulement - bobine en carbone 1 Rodamiento - bobina de grafito
SIZE 5
MIN.PACK 20
LINE CAPACITY mm/Mt. 0.35=140 lbs/yds 12=120
WEIGHT GR. 214
RATIO 6,2:1
37
CODE 1830009
REELS
AQUAREX BLACK FD - 7+1 B.B. • 7+1 cuscinetti a sfera • Anti-ritorno infinito • Bobina di riserva in grafite • Archetto sovradimensionato • Manovella in alluminio tornito • Pomello ergonomico EVA • Vernice gommata
W NE
• 7+1 ball bearings • One way clutch • One extra graphite spool • Oversized bail arm • Aluminium CNC handle • Ergonomic EVA knob • Rubber painting
8 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 8 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 8 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone
38
8 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1227710 1227720 1227731 1227740 1227750
Size 10 20 30 MATCH 40 50
Min.Pack 20 20 20 20 20
Line Capacity mm/Mt. 0.15/220 0.20/170 0.25/110 LBS/YDS. 4/180 6/140 8/100 mm/Mt. 0.20/200 0.25/130 0.30/90 LBS/YDS. 6/100 8/110 10/90 mm/Mt. 0.20/200 0.25/130 0.30/90 LBS/YDS. 6/160 8/110 10/90 mm/Mt. 0.30/260 0.35/190 0.4/150 LBS/YDS. 10/230 12/190 15/150 mm/Mt. 0.35/220 0.4/170 0.45/140 LBS/YDS. 2/220 15/180 18/150
Weight gr. 235 235 324 405 416
RATIO 5.2:1 5.2:1 5.2:1 4.8:1 4.8:1
AQUAREX BLACK RD - 7+1 B.B.
W NE
• 7+1 ball bearings • One way clutch • One extra graphite spool • Oversized bail arm • Aluminium CNC handle • Ergonomic EVA knob • Rubber painting
REELS
• 7+1 cuscinetti a sfera • Anti-ritorno infinito • Bobina di riserva in grafite • Archetto sovradimensionato • Manovella in alluminio tornito • Pomello ergonomico EVA • Vernice gommata
8 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 8 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 8 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 8 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 10 20 30 30 MATCH 40 50
Min.Pack 20 20 20 20 20 20
Line Capacity mm/Mt. 0.15/220 0.20/170 0.25/110 LBS/YDS.4/180 6/140 8/100 mm/Mt. 0.20/200 0.25/130 0.30/90 LBS/YDS.6/100 8/110 10/90 mm/Mt. 0.20/330 0.25/210 0.30/150 LBS/YDS.6/270 8/190 10/130 mm/Mt. 0.20/200 0.25/130 0.30/90 LBS/YDS.6/160 8/110 10/90 mm/Mt. 0.30/260 0.35/190 0.4/150 LBS/YDS.10/230 12/190 15/150 mm/Mt. 0.35/220 0.4/170 0.45/140 LBS/YDS.12/220 15/180 18/150
Weight gr. 243 320 317 332 430 440
RATIO 5.2:1 5.2:1 5.2:1 5.2:1 4.8:1 4.8:1
39
Code 1227610 1227620 1227630 1227631 1227640 1227650
REELS
Hi Speed 6,2:1
MATCH FD - 5+1 B.B.
6 Cuscinetti - 1 bobina alluminio match + 1 bobina di ricambio deep in grafite inclusa 6 Ball bearings - 1 aluminium match spool + 1 extra graphite deep spool included 6 Roulements - 1 bobine match aluminium + 1 bobine supplementaire carbone deep 6 Rodamientos - 1 bobina de aluminio match + 1 bobina suplementaria deep de grafito incluida
CODE 1227330 1227340
SIZE 30 40
MIN.PACK 20 20
Hi Speed 6,2:1
LINE CAPACITY mm/Mt. 0.25/130,0.30/90,0.35/65 mm/Mt. 0.25/170,0.30/120,0.35/85
WEIGHT GR. 300 320
RATIO 6,2:1 6,2:1
MATCH RD - 5+1 B.B.
6 Cuscinetti - 1 bobina alluminio match + 1 bobina di ricambio deep in grafite inclusa 6 Ball bearings - 1 aluminium match spool + 1 extra graphite deep spool included 6 Roulements - 1 bobine match aluminium + 1 bobine supplementaire carbone deep
40
6 Rodamientos - 1 bobina de aluminio match + 1 bobina suplementaria deep de grafito incluida
CODE 1227230 1227240
SIZE 30 40
MIN.PACK 20 20
LINE CAPACITY mm/Mt. 0.25/130,0.30/90,0.35/65 mm/Mt. 0.25/170,0.30/120,0.35/85
WEIGHT GR. 310 320
RATIO 6,2:1 6,2:1
AQUAREX FD - 4+1 b.b. REELS
5 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 5 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 5 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 5 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
CODE 1227530 1227540 1227550 1227565
SIZE 30 40 50 65
MIN.PACK 20 20 20 20
LINE CAPACITY mm/Mt. 0.25=190/0.30=130/0.35=100 mm/Mt. 0.30-180 0.35-130 0.40-100 mm/Mt. 0,30=180/0,35=130/0,40=100 mm/Mt. 0,40=160/0,45=120/0,50=100
WEIGHT GR. 301 301 393 385
RATIO 5.1:1 5.1:1 4.8:1 4.8:1
W NE W E N
AQUAREX RD - 4+1 b.b.
5 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 5 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 5 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 5 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
SIZE 20 30 40
MIN.PACK 20 20 20
LINE CAPACITY mm/Mt. 0.20=220 0.25=140 0.30=100 mm/Mt. 0.25=190 0.30=130 0.35=100 mm/Mt. 0.30=180 0.35=130 0.40=100
WEIGHT GR. 316 312 310
RATIO 5.1:1 5.1:1 5.1:1
41
CODE 1227420 1227430 1227440
RAPID BASS FD - 10+1 B.B. REELS
ADVANCED SPINN
• 10+1 cuscinetti a sfera • Anti-ritorno infinito • Bobina in alluminio alleggerito • Rotore bilanciato al computer • Archetto sovradimensionato • Manovella in metallo tornito • Pomello ergonomico in EVA • Design ad alta precisione
W NE
• 7+1 ball bearings • One way clutch • Lightened aluminium spool • Computer balanced rotor • Oversized bail arm • Metal machined handle • Ergonomic EVA knob • Hi-precision design
11 Cuscinetti - 1 bobina alluminio + 1 bobina extra in grafite inclusa 11 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 11 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone
42
11 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1224710 1224720 1224730 1224740 1224750 1224760
Size 10 20 30 40 50 60
Min.Pack 20 20 20 20 20 20
Line Capacity mm/Mt. 0.18/195 0.20/155 0.25/100 lbs/yds. 3/215 4/170 6/110 mm/Mt. 0.18/215 0.20/175 0.25/110 lbs/yds. 3/235 4/190 6/120 mm/Mt. 0.25/180 0.30/125 0.35/90 lbs/yds. 6/195 10/135 12/100 mm/Mt. 0.30/150 0.35/110 0.40/85 lbs/yds. 10/165 12/120 15/90 mm/Mt. 0.35/185 0.40/140 0.50/90 lbs/yds. 12/200 15/155 20/100 mm/Mt. 0.45/135 0.50/110 0.60/75 lbs/yds. 18/150 20/120 35/80
Weight gr. 270 280 300 310 390 400
RATIO 5.5:1 5.5:1 5.2:1 5.2:1 5.2:1 5.2:1
RAPID FORMULA FD - 8+1 B.B.
REELS
W NE
9 Cuscinetti - 1 bobina grafite - 1 bobina di ricambio in grafite inclusa 9 Ball bearings - 1 graphite spool - 1 extra graphite spool included 9 Roulements - 1 bobine carbone - bobine supplementaire carbone 9 Rodamientos - 1 bobina de grafito - 1 bobina suplementaria de grafito incluida
CODE 1227910 1227920 1227930 1227940 1227950 1227960
Size 10 20 30 40 50 60
Min.Pack 20 20 20 20 20 20
Line Capacity mm/Mt. 0.15/170 0.20/130 0.25/90 lbs/yds. 4/130 6/110 8/80 mm/Mt. 0.15/220 0.20/170 0.25/110 lbs/yds. 4/180 6/140 8/100 mm/Mt. 0.20/200 0.25/130 0.30/90 lbs/yds. 6/160 8/110 10/90 mm/Mt. 0.25/280 0.30/200 0.35/140 lbs/yds. 8/240 10/180 12/140 mm/Mt. 0.30/260 0.35/190 0.40/150 lbs/yds. 10/230 12/190 15/150 mm/Mt. 0.35/220 0.40/170 0.45/140 lbs/yds. 12/220 15/180 18/150
Weight gr. 232 237 306 328 408 418
RATIO 5.2:1 5.2:1 5.2:1 5.2:1 4.8:1 4.8:1
RAPID FORMULA RD - 8+1 B.B.
W NE
9 Cuscinetti - 1 bobina grafite - 1 bobina di ricambio in grafite inclusa 9 Ball bearings - 1 graphite spool - 1 extra graphite spool included 9 Roulements - 1 bobine carbone - bobine supplementaire carbone 9 Rodamientos - 1 bobina de grafito - 1 bobina suplementaria de grafito incluida
Size 10 20 30 40 50
Min.Pack 20 20 20 20 20
Line Capacity mm/Mt. 0.15/170 0.20/130 0.25/90 lbs/yds. 4/130 6/110 8/80 mm/Mt. 0.15/220 0.20/170 0.25/110 lbs/yds. 4/180 6/140 8/100 mm/Mt. 0.20/200 0.25/130 0.30/90 lbs/yds. 6/160 8/110 10/90 mm/Mt. 0.25/280 0.30/200 0.35/140 lbs/yds. 8/240 10/180 12/140 mm/Mt. 0.30/260 0.35/190 0.40/150 1 lbs/yds. 0/230 12/190 15/150
Weight gr. 238 245 321 338 432
RATIO 5.2:1 5.2:1 5.2:1 5.2:1 4.8:1
43
Code 1227810 1227820 1227830 1227840 1227850
REELS
RAPID速 SEAL FD - 7+1 B.B.
8 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 8 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 8 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 8 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1226820 1226840 1226860
Size 20 40 60
Min.Pack 40 40 20
Line Capacity mm/Mt. 0,18=215/0,20=175/0,25=110 mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,45=195/0,50=155/0,60=110
Weight gr. 260 310 420
RATIO 5,2:1 5,2:1 5,2:1
RAPID速 SEAL RD - 7+1 B.B.
8 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 8 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 8 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 8 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Size 20
Min.Pack 40
1226730
30
40
1226740
40
20
1226750
50
20
44
Code 1226720
Line Capacity mm/Mt. 0,18=240/0,20=195/0,25=125 lbs/yds 3=260/4=215/6=135 mm/Mt. 0,25=245/0,30=170/0,35=125 lbs/yds 6=270/10=185/12=135 mm/Mt. 0,30=195/0,35=145/0,40=110 lbs/yds 10=215/12=160/15=120 mm/Mt. 0,35=275/0,40=210/0,50=135 lbs/yds 12=300/15=230/20=150
Weight gr. 260
RATIO 5,5:1
304
5,2:1
320
5,2:1
412
5,2:1
REELS
W NE
VIGOR IDEA FD - 3 B.B.
3 Cuscinetti - 1 bobina alluminio - 1 bobina di ricambio in grafite 3 Ball bearings - 1 aluminium spool - 1 extra graphite spool 3 Roulements - 1 bobine aluminium - 1 bobine supplementaire carbone 3 Rodamientos - 1 bobina de aluminio - 1 bobina suplementaria de grafito
Code 1223330 1223340 1223350 1223360
Size 30 40 50 60
Min.Pack 20 20 20 20
W NE
Line Capacity mm/Mt. 0.25/180 0.30/125 0.35/90 LBS/YDS. 6/195 10/135 12/100 mm/Mt. 0.30/150 0.35/110 0.40/85 lbs/yds. 10/165 12/120 15/90 mm/Mt. 0.35/185 0.40/140 0.50/90 lbs/yds. 12/200 15/155 20/100 mm/Mt. 0.45/135 0.50/110 0.60/75 lbs/yds. 18/150 20/120 35/80
Weight gr. 270 280 290 310
RATIO 5.2:1 5.2:1 5.2:1 5.2:1
VIGOR IDEA RD - 3 B.B.
3 Cuscinetti - 1 bobina alluminio - 1 bobina di ricambio in grafite 3 Ball bearings - 1 aluminium spool - 1 extra graphite spool 3 Roulements - 1 bobine aluminium - 1 bobine supplementaire carbone 3 Rodamientos - 1 bobina de aluminio - 1 bobina suplementaria de grafito
Size 30 40
Min.Pack 20 20
Line Capacity mm/Mt. 0.25/180 0.30/125 0.35/90 LBS/YDS. 6/195 10/135 12/100 mm/Mt. 0.30/150 0.35/110 0.40/85 lbs/yds. 10/165 12/120 15/90
Weight gr. 290 295
RATIO 5.2:1 5.2:1
45
Code 1223230 1223240
REELS
VIGOR速 F RD - 4 B.B.
4 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 4 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 4 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 4 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1222210 1222220 1222230 1222240 1222250 1222260
Size 10 20 30 40 50 60
Min.Pack 40 40 40 40 20 20
Line Capacity mm/Mt. 0,18=215/0,20=175/0,25=110 mm/Mt. 0,18=240/0,20=195/0,25=125 mm/Mt. 0,25=245/0,30=170/0,35=125 mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,35=275/0,40=210/0,50=135 mm/Mt. 0,45=195/0,50=155/0,60=110
Weight gr. 234 241 281 296 388 410
RATIO 5,5:1 5,5:1 5,2:1 5,2:1 5,2:1 5,2:1
VIGOR速 F RD - 2 B.B.
2 Cuscinetti - 1 bobina grafite + 1 bobina di ricambio in grafite inclusa 2 Ball bearings - 1 graphite spool + 1 extra graphite spool included 2 Roulements - 1 bobine carbone + 1 bobine supplementaire carbone
46
2 Rodamientos - 1 bobina de grafito + 1 bobina suplementaria de grafito incluida
Code 1221310 1221320 1221330 1221340 1221350 1221360
Size 10 20 30 40 50 60
Min.Pack 40 40 40 40 20 20
Line Capacity mm/Mt. 0,18=215/0,20=175/0,25=110 mm/Mt. 0,18=240/0,20=195/0,25=125 mm/Mt. 0,25=245/0,30=170/0,35=125 mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,35=275/0,40=210/0,50=135 mm/Mt. 0,45=195/0,50=155/0,60=110
Weight gr. 202 211 245 256 336 356
RATIO 5,5:1 5,5:1 5,2:1 5,2:1 5,2:1 5,2:1
VIGOR速 SHIVER RD - 1 B.B. REELS
1 Cuscinetto - 1 bobina grafite 1 Ball bearing - 1 graphite spool 1 Roulement - 1 bobine carbone 1 Rodamiento - 1 bobina de grafito
Code 1204210 1204220 1204230 1204240 1204250 1204260
Size 10 20 30 40 50 60
Min.Pack 40 40 40 40 20 20
Line Capacity mm/Mt. 0,18=215/0,20=175/0,25=110 mm/Mt. 0,18=240/0,20=195/0,25=125 mm/Mt. 0,25=245/0,30=170/0,35=125 mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,35=275/0,40=210/0,50=135 mm/Mt. 0,45=195/0,50=155/0,60=110
Weight gr. 222 230 273 284 367 380
RATIO 5,5:1 5,5:1 5,2:1 5,2:1 5,2:1 5,2:1
VIGOR速 SX FD - 1 B.B.
1 Cuscinetto - 1 bobina grafite 1 Ball bearing - 1 graphite spool 1 Roulement - 1 bobine carbone 1 Rodamiento - 1 bobina de grafito
Size 10 20 30 40 50 60
Min.Pack 40 40 40 40 20 20
Line Capacity mm/Mt. 0,18=215/0,20=175/0,25=110 mm/Mt. 0,18=240/0,20=195/0,25=125 mm/Mt. 0,25=245/0,30=170/0,35=125 mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,35=275/0,40=210/0,50=135 mm/Mt. 0,45=195/0,50=155/0,60=110
Weight gr. 210 223 256 271 349 367
RATIO 5,5:1 5,5:1 5,2:1 5,2:1 5,2:1 5,2:1
47
Code 1205210 1205220 1205230 1205240 1205250 1205260
REELS
VIGOR® SHIVER LINE RD - 1 B.B. Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
1 Cuscinetto - 1 bobina grafite 1 Ball bearing - 1 graphite spool 1 Roulement - 1 bobine carbone 1 Rodamiento - 1 bobina de grafito
Code 1206210 1206220 1206230 1206240 1206250 1206260
Size 10 20 30 40 50 60
Min.Pack 40 40 40 40 20 20
Line Capacity mm/Mt. 0,18=215/0,20=175/0,25=110 mm/Mt. 0,18=240/0,20=195/0,25=125 mm/Mt. 0,25=245/0,30=170/0,35=125 mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,35=275/0,40=210/0,50=135 mm/Mt. 0,45=195/0,50=155/0,60=110
Weight gr. 234 242 283 298 386 392
RATIO 5,5:1 5,5:1 5,2:1 5,2:1 5,2:1 5,2:1
VIGOR® SX LINE FD - 1 B.B. Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
1 Cuscinetto - 1 bobina grafite 1 Ball bearing - 1 graphite spool 1 Roulement - 1 bobine carbone
48
1 Rodamiento - 1 bobina de grafito
Code 1207210 1207220 1207230 1207240 1207250 1207260 1207270
Size 10 20 30 40 50 60 70
Min.Pack 40 40 40 40 20 20 20
Line Capacity mm/Mt. 0,18=215/0,20=175/0,25=110 mm/Mt. 0,18=240/0,20=195/0,25=125 mm/Mt. 0,25=245/0,30=170/0,35=125 mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,35=275/0,40=210/0,50=135 mm/Mt. 0,45=195/0,50=155/0,60=110 mm/Mt. 0.40=345/0.50=220/0.60=155
Weight gr. 222 235 268 286 369 388 780
RATIO 5,5:1 5,5:1 5,2:1 5,2:1 5,2:1 5,2:1 4,1:1
VIGOR® gunship Fd - 1 b.b. REELS
Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
1 Cuscinetto - 1 bobina grafite 1 Ball bearing - 1 graphite spool 1 Roulement - 1 bobine carbone 1 Rodamiento - 1 bobina de grafito
Code 1208923 1208925
Size 30 50
Min.Pack 40 40
Line Capacity mm/Mt. 0,25=245/0,30=170/0,35=125 mm/Mt. 0,35=275/0,40=210/0,50=135
Weight gr. 283 500
RATIO 5,2:1 5,2:1
W NE
TOP GUN FD - 1 B.B. Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
1 Cuscinetto - 1 bobina grafite 1 Ball bearing - 1 graphite spool 1 Roulement - 1 bobine carbone Size 50
Min.Pack 40
49
1 Rodamiento - 1 bobina de grafito
Code 1208900
Line Capacity mm/Mt. 0,45=135/0,50=110/0,60=75
Weight gr. 503
RATIO 5,2:1
REELS
VIGOR® gunship rd - 1 b.b. Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
1 Cuscinetto - 1 bobina grafite 1 Ball bearing - 1 graphite spool 1 Roulement - 1 bobine carbone 1 Rodamiento - 1 bobina de grafito
Code 1208913 1208915
Size 30 50
Min.Pack 20 20
Line Capacity mm/Mt. 0,30=195/0,35=145/0,40=110 mm/Mt. 0,35=275/0,40=210/0,50=135
Weight gr. 320 500
RATIO 5,2:1 5,2:1
TOP GUN RD - 1 B.B. Filo inlcuso Spooled Line Nylon bobiné Hilo INCLUIDO
1 Cuscinetto - 1 bobina grafite - filo incluso 1 Ball bearing - 1 graphite spool - spooled line 1 Roulement - 1 bobine carbone - Nylon bobiné
50
1 Rodamiento - 1 bobina de grafito - hilo incluido
Code 1208901
Size 50
Min.Pack 40
Line Capacity mm/Mt. 0,35=275/0,40=210/0,50=135 lbs/yds 12=300/15=230/20=150
Weight gr. 400
RATIO 5,2:1
RAPID速 MICRO RD - 5+1 B.B. REELS
6 Cuscinetti - 1 bobina alluminio + 1 bobina di ricambio in grafite inclusa 6 Ball bearings - 1 aluminium spool + 1 extra graphite spool included 6 Roulements - 1 bobine aluminium + 1 bobine supplementaire carbone 6 Rodamientos - 1 bobina de aluminio + 1 bobina suplementaria de grafito incluida
Code 1361005
Size 5
Min.Pack 20
1361010
10
20
Line Capacity mm/Mt. 0,15=180/0,18=150/0,20=120 lbs/yds 1=190/2=160/4=130 mm/Mt. 0,18=180/0,20=160/0,25=100 lbs/yds 2=290/4=150/6=110
Weight gr. 193
RATIO 5,1:1
249
5,1:1
NITRO FD - 2+1 B.B.
3 Cuscinetti - 1 bobina in alluminio 3 Ball bearings - 1 aluminium spool 3 Roulements - 1 bobine alluminium Code 1361050
Size 5
Min.Pack 50
51
3 Rodamientos - 1 bobina de aluminio
Line Capacity mm/Mt. 0,17=105/0,20=75
Weight gr. 172
RATIO 5,1:1
REELS
VIGOR® SL FD - 1 B.B.
assorted blue
red
green
1 Cuscinetto - 1 bobina in grafite - filo incluso 1 Ball bearing - 1 graphite spool - spooled line 1 Roulement - 1 bobine carbone - Nylon bobiné 1 Rodamiento - 1 bobina de grafito - hilo incluido
Code 1360210
Size 100
Min.Pack 50
1360220
200
50
Line Capacity mm/Mt. 0,18=165/0,20=135/0,25=85 lbs/yds 3=180/4=145/6=90 mm/Mt. 0,18=245/0,20=200/0,25=125 lbs/yds 3=265/4=220/6=180
Weight gr. 150
RATIO 5,2:1
180
5,5:1
VIGOR® SOL RD - 1 B.B.
assorted blue
red
green
1 Cuscinetto - 1 bobina in grafite - filo incluso 1 Ball bearing - 1 graphite spool - spooled line 1 Roulement - 1 bobine carbone - Nylon bobiné
52
1 Rodamiento - 1 bobina de grafito - hilo incluido
Code 1207202
Size 20
Min.Pack 50
Line Capacity mm/Mt. 0,18=240/0,20=195/0,25=125 lbs/yds 3=260/4=215/6=135
Weight gr. 220
RATIO 5,5:1
alps fly - 1 B.b. REELS
Tutto in metallo Todo de metal All metal
Frizione Micrometrica Micrometric drag frein micrometrique
freno micrometrico
1 Cuscinetto acciaio - monoblocco interno tornito 1 Stainless steel ball bearing - machine cut inner gear 1 Roulement acier - bloc interieur tourne 1 Rodamiento de acero - monobloco interno atornillado
Code 1852134 1852156 1852179
Size DT 3/4 DT 5/6 DT 7/9
Min.Pack 50 50 50
Large Arbor
Line Capacity WF4 + 70 yds 20 lbs backing WF6 + 130 yds 20 lbs backing WF9 + 200 yds 30lbs backing
Weight gr. 150 172 240
RATIO 1:1 1:1 1:1
alps ALU - 1 B.b.
Tutto in metallo Todo de metal All metal
1 Cuscinetto 1 Ball bearing 1 Roulement 1 Rodamiento
Size DT 3/4 DT 4/5 DT 6/7 DT 8/9
Min.Pack 50 50 50 50
Line Capacity WF3+20lbs 70yds backing WF4+25lbs 70yds backing WF6+30lbs 70yds backing WF8+35lbs 60yds backing
Weight gr. 150 160 180 190
RATIO 1:1 1:1 1:1 1:1
53
Code 1852234 1852245 1852267 1852289
REELS
MINI FLY
Tutto in grafite All graphite tout en carbone
todo de grafito
Code 1852034 1852056 1852078
Size 3/4 5/6 7/8
Min.Pack 50 50 50
Line Capacity DT 3/4 DT 5/6 DT 7/8
Weight gr. 124 140 160
RATIO 1:1 1:1 1:1
54
ALPS HI-TECH
alps pro fly
Tutto in grafite All graphite
Tutto in grafite All graphite
tout en carbone
tout en carbone
todo de grafito
todo de grafito
Code 1852357 1852379 1852391
Size Min.Pack DT 5/7 50 DT 7/9 50 DT 9/11 50
Line Capacity WF5 + 100 yds 20 lbs backing WF7 + 200 yds 20 lbs backing WF9 + 300 yds 20 lbs backing
Weight 161 gr. 175 192
RATIO 1:1 1:1 1:1
Code 1852434 1852456 1852478
Size DT 3/4 DT 5/6 DT 7/8
Min.Pack 50 50 50
Line Capacity WF3 + 295 yds 20 lbs backing WF5 + 360 yds 20 lbs backing WF7 + 415 yds 20 lbs backing
Weight 109 gr. 124 132
RATIO 1:1 1:1 1:1