BRAND: RLA

Flexiband internal corner

Waterproofng internal corners providing maximum protection at the most volatile areas, ensuring a quality watertight seal that accommodates movement in a variety of different waterproofng applications. Made from a unique grade of rubber, providing an elastic seal to line the wall / foor junction, forming a rupture resistant seal at corner intersections.

Flexiband tap sleeves

Tap Sleeve enhances the seal around penetrations such as pipes, drainage outlets, cabling and any surface fxtures by protecting against movement, vibration and cracking. It provides a permanent tight rubber seal against water ingress enabling penetrations to withstand a variety of movement conditions without compromising the membrane seal.

Waterproof tape

An open weave polyester reinforcing fabric for use of reinforcing RLA waterproofng membranes. Generally 2 Litres of waterproofng membrane per square metre of product is required to properly saturate and cover scrim tape.

UniFlex

Unifex is a white, high solids, fexible acrylic additive. It can be used internally or externally on wall and foor surfaces. Unifex when mixed with RLA cement based adhesives can be used to bond tiles over concrete, render, rendered brickwork, blockwork.

Antirock Primer

ANTIROCK PRIMER is a blend of SBS modifed bitumen, fast-evaporating solvents and adhesive enhancing additives. It is used to prime concrete and metal surfaces to improve the adhesion of torch-applied membranes. Installation: Spread using a roller, in preparation for SOPRALENE, SOPRASUN and SOPRAGUM membranes.

Sopralene Flam 180

Heat-welded base sheet membrane with excellent resisance against puncture and tea. It composed of a non-woven polyester reinforcement and SBS modifed bitumen. Installation: Torch applied membrane, on prepared substrate with ANTIROCK PRIMER.

Soprafix Base 630

High-performance base sheet membrane mechanically fastened composed of a composite reinforcement and SBS modifed bitumen. Installation: Mechanically fastened with traditional fxing/ plates. End and side laps fully torched. Complemented with SOPRALENE FLAM 180 GR cap sheet.

Sopralene Flam 180 Gr

Heat-welded cap sheet membrane with excellent resistance to puncture and tear. It is composed of a non-woven polyester reinforcement and SBS modifed bitumen. Installation: Torch applied membrane, complemented with SOPRALENE FLAM 180 or SOPRAFIX BASE 630 base sheets.

Sopralene Flam Jardin Cap

Heat-welded cap sheet membrane with anti-root penetration properties and excellent resistance to puncture and tear. It is composed of a non-woven polyester reinforcement and SBS modifed bitumen. Installation: Torch applied membrane, complemented with SOPRALENE FLAM 180 base sheet and SOPRADRAIN 10 drainage board.