CARRERA
2000/40
cARReRA
www.ilapak.com
CARRERA
1000/40
cARReRA
www.ilapak.com
Carrera
1000/40
TECHNICAL SPECIFICATIONS Up to 130 cpm, single jaw. Higher speeds with multiple jaws.
Machine speed
Production output dependent upon product, film and machine specifications.
Product dimensions LENGTH
50/550 mm - 2/21.6” with any jaws centres and length 20/230mm - 0.8/9” with jaw length 250mm - 9.8” 20/360mm - 0.8/14.2” with jaw length 400mm - 15.7” Up to 90mm - 3.5” with jaw centre 150mm - 5.9” Up to 140mm - 5.5” with jaw centre 210mm - 8.3” Up to 630mm - 24.8”
WIDTH HEIGHT
Film cut-off
Cut-off defined as: product length+(height x 1.2)+28mm (1.1”), depending on product characteristics.
Wrapping materials
Suitable heat-sealable films, such as plain, or co-extruded polypropylene (PP), laminate films (e.g. OPP+PE), polythene films (PE) as well as cold sealable films of suitable quality
Film reel dimensions
76mm - 3” 350mm - 13.8” Up to 900mm - 35.4” 40 kg - 88 lbs PLC controlled machine From 220 to 480V, 50/60 Hz, 3-phase, 5kVA 6 bar, 1l/min with air gusseting 900 kg - 1984 lbs
CORE OUTER WIDTH
Film reel max weight Electronic platform Power requirement Compressed air Machine weight
MAIN STANDARD FEATURES PLC-controlled HFFS machine with rotary sealing jaws. Multi-axis drive technology with 3 indipendent servo motors for product infeed, sealing rollers and rotary sealing jaws. A simple-to-use operator interface allows quick product change-over 99 program memory; two-level password protection security. Automatic adjustement of film-pull, infeed and sealing parameters during product of program change. Motorised film unwinding roller (available as optional) Precision temperature control circuits ensure seal strength and quality. No product/ no bag. Misplaced product detection system. Single piece transparent guarding with safety interlock. Robust mechanical construction with welded sheet metal main body, epoxy powder coating or (opt.) stainless-steel finishing. Hygienic design with cantilevered body and infeed, for easy clean down. Single film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. In-line and right-angle types of automatic feeders available on request.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
CARRERA
2000/40
cARReRA
www.ilapak.com
Carrera
2000/40
TECHNICAL SPECIFICATIONS Up to 130 cpm, single jaw. Higher speeds with multiple jaws.
Machine speed
Production output dependent upon product, film and machine specifications.
Product dimensions LENGTH
50/550 mm - 2/21.6” with any jaws centres and length 20/230mm - 0.8/9” with jaw length 250mm - 9.8” 20/360mm - 0.8/14.2” with jaw length 400mm - 15.7” Up to 90mm - 3.5” with jaw centre 150mm - 5.9” Up to 140mm - 5.5” with jaw centre 210mm - 8.3” Up to 630mm - 24.8”
WIDTH HEIGHT
Film cut-off
Cut-off defined as: product length+(height x 1.2)+28mm (1.1”), depending on product characteristics.
Wrapping materials
Suitable heat-sealable films, such as plain, or co-extruded polypropylene (PP), laminate films (e.g. OPP+PE), polythene films (PE) as well as cold sealable films of suitable quality
Film reel dimensions
76mm - 3” 350mm - 13.8” 650mm - 25.6” 40 kg - 88 lbs PC controlled machine From 220 to 480V, 50/60 Hz, 3-phase, 5kVA 6 bar, 1l/min with air gusseting 900 kg - 1984 lbs
CORE OUTER WIDTH
Film reel max weight Electronic platform Power requirement Compressed air Machine weight
MAIN STANDARD FEATURES PC-controlled HFFS machine with rotary sealing jaws. Multi-axis drive technology with 4 indipendent servo motors for product infeed, sealing rollers, film feed and rotary sealing jaws. A simple-to-use operator interface allows quick product change-over 128 program memory; two-level password protection security. Automatic adjustement of film-pull, infeed and sealing parameters during product of program change. Motorised film unwinding roller (available as optional) Precision temperature control circuits ensure seal strength and quality. No product/ no bag. Misplaced product detection system. Single piece transparent guarding with safety interlock. Robust mechanical construction with welded sheet metal main body, epoxy powder coating or (opt.) stainless-steel finishing. Hygienic design with cantilevered body and infeed, for easy clean down. Single film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. In-line and right-angle types of automatic feeders available on request.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
carrera
500
carrera
www.ilapak.com
Carrera
500
TECHNICAL SPECIFICATIONS Up to 100 cpm, single jaw. Up to 200 cpm, twin jaws 150mm - 5.9”
Machine speed
Production output dependent upon product, film and machine specifications.
Product dimensions 50/550 mm - 2/21.6” with any jaws centres and length 20/230mm - 0.8/9” with jaw length 250mm - 9.8” 20/300mm - 0.8/11.8” with jaw length 325mm - 12.8” Up to 90mm - 3.5” with jaw centre 150mm - 5.9” Up to 120mm - 4.7” with jaw centre 180mm - 7.1” Up to 630mm - 24.8”
LENGTH WIDTH HEIGHT
Film cut-off
Cut-off defined as: product length+height+40mm (1.6”), depending on product characteristics.
Suitable heat-sealable films, such as plain, or co-extruded polypropylene (PP), laminate films (e.g. OPP+PE), as well as cold sealable films of suitable quality
Wrapping materials Film reel dimensions
76mm - 3” 350mm - 13.8” 650mm - 25.6”
CORE OUTER WIDTH
Film reel max weight Electronic platform Power requirement Compressed air Machine weight
40 kg - 88 lbs PLC From 220 to 480V, 50/60 Hz, 3-phase, 5kVA 6 bar, 1l/min with air gusseting 850 kg - 1874 lbs
MAIN STANDARD FEATURES PLC-controlled HFFS machine with rotary sealing jaws. Multi-axis drive technology with 3 indipendent drive circuits consisting of an AC motor controlled by a frequency inverter for product infeed, sealing rollers and rotary sealing jaws. A simple-to-use operator interface TFT touch screen display, 5,7” wide , 64.000 colours, allows quick product change-over 99 program memory; Additional user-defined password level for limiting access to selected machine functions. Service mode for diagnostics, trouble shooting and basic machine configuration Automatic adjustement of film-pull, infeed and sealing parameters during product of program change. Precision temperature control circuits ensure seal strength and quality. No product/ no bag. Single piece transparent guarding with safety interlock. Robust mechanical construction with welded sheet metal main body, epoxy powder coating or (opt.) stainless-steel finishing. Hygienic design with cantilevered body and infeed, for easy clean down. Single film reel mounting with self-centering cones, right hand machine version, 2,5 m long infeed, standard. Three pre-defined, plus two user defined electronic cam outputs for peripheral devices SD flash memory slot for download / upgrade product and machine parameters; SD card contains full operating system.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
2000 LD
delta
www.ilapak.com
Delta
2000 LD
TECHNICAL SPECIFICATIONS Up to 60 cycles per minute
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions LENGTH
Up to 600mm - 24” 300mm - 12” (jaws 345mm - 13.6”) Up to 100mm - 4.0” standard (centre-axle 180) Up to 140mm - 5.5” on request (centre-axle 215) Min 100mm - 4” / Max 650mm - 26”
WIDTH HEIGHT
Film cut off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films 76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 400mm - 15.7” on request (auto-splicer only) 800mm - 31.5” standard 500mm - 19.7” standard (wet-wipes only) 650mm - 25.6” on request 900mm - 35.4” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC
CORE OUTER WIDTH
Film reel max weight Electronic platform
For USA & Canada, in particular, Allen Bradley platform available.
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 5kVA 6 bar, 200l/min 1200 Kg - 2700 lbs
MAIN STANDARD FEATURES Long-dwell sealing head to optimize sealing cycle. 3 servo motors to control infeed, rollers, jaws (additional motors with automatic feeders). User friendly operator interface with intuitive icons on 6” colour VGA touch screen. 128 programs (additional memory on request). Automatic product size change. Integrated temperature control. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Single film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, stainless steel finishing standard.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters. These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
2000 LDR
delta
www.ilapak.com
Delta
2000 LDR
TECHNICAL SPECIFICATIONS Up to 60 cycles per minute
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions Up to 600mm - 24” 300mm - 12” (jaws 345mm - 13.6”) Up to 100mm - 4.0” standard (centre-axle 180) Up to 140mm - 5.5” on request (centre-axle 215) Min 100mm - 4” / Max 650mm - 26”
LENGTH WIDTH HEIGHT
Film cut-off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films 76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 400mm - 15.7” on request (auto-splicer only) 650mm - 26.5” standard 800mm - 31.5” on request 900mm - 35.4” on request 1000mm - 39.4” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC
CORE OUTER WIDTH
Film reel max weight Electronic platform
For USA & Canada, in particular, Allen Bradley platform available.
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 5kVA 6 bar, 200l/min 1300 Kg - 2900 lbs
MAIN STANDARD FEATURES Inverted machine with long-dwell sealing head. 3 servo motors to control infeed, rollers, jaws (additional motors with automatic feeders). User friendly 6” colour VGA touch screen operator interface with intuitive icons. 128 programs (additional memory on request). Automatic product size change. Integrated temperature control. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Adjustable folding box. Automatic sealing rollers height adjustment. Single film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, stainless steel finishing standard.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters. These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
3000 DC
delta
www.ilapak.com
Delta
3000 DC
TECHNICAL SPECIFICATIONS Up to 150 cycles per minute (single jaw) Up to 300 cycles per minute (twin jaw)
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions Up to 400mm - 16”
LENGTH
According to the head design
140mm - 5.5” Up to 60mm - 2.4”
WIDTH HEIGHT
According to the head design
Min 80mm - 3.1” / Max 450mm - 17.5”
Film cut-off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Laminated, co-extruded and all sealable films
Film reel max weight Electronic platform
76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 400mm - 15.7” on request (auto-splicer only) 500mm - 19.7” standard 650mm - 25.6” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 7kVA 6 bar, 200l/min 1400 Kg - 3100 lbs
CORE OUTER WIDTH
For USA & Canada, in particular, Allen Bradley platform available.
MAIN STANDARD FEATURES D-cam sealing head to optimize sealing cycle. 3 servo motors to control infeed, rollers, jaws, film feed (additional motors with automatic feeders). User friendly 10” colour VGA touch screen operator interface with intuitive icons. 64 programs (additional memory on request). Automatic product size change. Integrated temperature control. Film tensioning and power unwind system controlled by loadcell. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Double film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, epoxy powder coating standard or (optional) stainless steel finishing.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters. These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
3000 HS
delta
www.ilapak.com
Delta
3000 HS
TECHNICAL SPECIFICATIONS Up to 150 cycles per minute
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions LENGTH
Up to 350mm - 14” According to the head design
WIDTH
150mm - 6”(jaws 190mm - 7.5”)
HEIGHT
The head design can accomodate the following product heights according to customer specifications:
Up to 90mm - 3.5” Up to 60mm - 2.4” Up to 45mm - 1.8” Min 80mm - 3.1” / Max 400mm - 16”
Film cut-off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films 76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 400mm - 15.7” on request (auto-splicer only) 500mm - 19.7” standard 650mm - 25.6” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC
CORE OUTER WIDTH
Film reel max weight Electronic platform
For USA & Canada, in particular, Allen Bradley platform available.
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 7kVA 6 bar, 200l/min 1500 Kg - 3300 lbs
MAIN STANDARD FEATURES High-speed machine with long-dwell sealing head. 4 servo motors to control infeed, rollers, jaws (additional motors with automatic feeders). User friendly 10” colour VGA touch screen operator interface with intuitive icons. 64 programs (additional memory on request). Automatic product size change. Integrated temperature control. Film tensioning and power unwind system controlled by loadcell. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Double film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, stainless steel finishing standard.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
3000 HSR
delta
www.ilapak.com
Delta
3000 HSR
TECHNICAL SPECIFICATIONS Up to 150 cycles per minute
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions LENGTH
Up to 350mm - 14” According to the head design.
WIDTH
150mm - 6” (jaws 190mm - 7.5”)
HEIGHT
The head design can accomodate the following product heights according to customer specifications:
Up to 90mm - 3.5” Up to 60mm - 2.4” Up to 45mm - 1.8” Min 80mm - 3.1” / Max 400mm - 16”
Film cut-off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films 76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 400mm - 15.7” on request (auto-splicer only) 500mm - 19.7” standard 650mm - 25.6” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC
CORE OUTER WIDTH
Film reel max weight Electronic platform
For USA & Canada, in particular, Allen Bradley platform available.
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 7kVA 6 bar, 200l/min 1600 Kg - 3550 lbs
MAIN STANDARD FEATURES Inverted machine with long-dwell sealing head. 4 servo motors to control infeed, rollers, jaws (additional motors with automatic feeders). User friendly 10” colour VGA touch screen operator interface with intuitive icons. 64 programs (additional memory on request). Automatic product size change. Integrated temperature control. Film tensioning and power unwind system controlled by loadcell. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Adjustable folding box. Automatic sealing rollers height adjustment. Double film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, epoxy powder coating standard or (optional) stainless steel finishing.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
3000 LD
delta
www.ilapak.com
Delta
3000 LD
TECHNICAL SPECIFICATIONS Up to 110 cycles per minute
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions LENGTH
Up to 650mm - 25.6” standard Up to 1000mm - 39.0” on request 320mm - 12.6” standard (jaws 345mm - 13.6”) 360mm - 14.2” on request (jaws 445mm - 17.3”) Up to 100mm - 4.0” standard (centre-axle 180) Up to 150mm - 6.0” on request (centre-axle 225) Up to 60mm - 2.4” on request (centre-axle 140) Min 100mm - 4” / Max 1200mm - 47”
WIDTH HEIGHT
Film cut-off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films 76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 400mm - 15.7” on request (auto-splicer only) 800mm - 31.5” standard 500mm - 19.7” standard (wet-wipes only) 650mm - 25.6” on request 900mm - 35.4” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC
CORE OUTER WIDTH
Film reel max weight Electronic platform
For USA & Canada, in particular, Allen Bradley platform available.
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 7kVA 6 bar, 200l/min 1400 Kg - 3100 lbs
MAIN STANDARD FEATURES Long-dwell sealing head to optimize sealing cycle. 4 servo motors to control infeed, rollers, jaws (additional motors with automatic feeders). User friendly 10” colour VGA touch screen operator interface with intuitive icons. 128 programs (additional memory on request). Automatic product size change. Integrated temperature control. Film tensioning and power unwind system controlled by loadcell. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Double film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, epoxy powder coating standard or (optional) stainless steel finishing.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
3000 LDR
delta
www.ilapak.com
Delta
3000 LDR
TECHNICAL SPECIFICATIONS Up to 110 cycles per minute
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions LENGTH
Up to 650mm - 25.6” standard Up to 1000mm - 39.0” on request 320mm - 12.6” standard (jaws 345mm - 13.6”) 360mm - 14.2” on request (jaws 440mm - 17.3”) Up to 100mm - 4.0” standard (centre-axle 180) Up to 150mm - 6.0” on request (centre-axle 225) Up to 60mm - 2.4” on request (centre-axle 140) Min 100mm - 4” / Max 1200mm - 47”
WIDTH HEIGHT
Film cut-off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films 76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 400mm - 15.7” on request (auto-splicer only) 650mm - 25.6” standard 800mm - 31.5”on request 900mm - 35.4” on request 100mm - 39.4” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC
CORE OUTER WIDTH
Film reel max weight Electronic platform
For USA & Canada, in particular, Allen Bradley platform available.
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 7kVA 6 bar, 200l/min 1500 Kg - 3300 lbs
MAIN STANDARD FEATURES Inverted machine with long-dwell sealing head. 5 servo motors to control infeed, rollers, jaws, belt and film (additional motors with automatic feeders). User friendly 10” colour VGA touch screen operator interface with intuitive icons. 128 programs (additional memory on request). Automatic product size change. Integrated temperature control. Film tensioning and power unwind system controlled by loadcell. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Adjustable folding box. Automatic sealing rollers height adjustment. Double film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, epoxy powder coating standard or (optional) stainless steel finishing.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
500 LDR
delta
www.ilapak.com
Delta
500 LDR
TECHNICAL SPECIFICATIONS Up to 30 cycles per minute in normal use
Machine speed
Can be up to 40 cycles, depends on film and product characteristics.
Product dimensions Up to 1200mm - 47.2”, variable bag length Up to 900mm - 34.5”, fixed bag length 300mm - 12” (jaws 345mm - 13.6”) Up to 200mm - 8.0” standard Min 100mm - 4” / Max 1000mm - 39.5”, fixed bag length
LENGTH WIDTH HEIGHT
Film cut off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films 76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 800mm - 31.5” standard 900mm - 35.4” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC From 220 to 480 V, 50/60 Hz, 5kVA 6 bar, 200l/min 1100 Kg - 2400 lbs
CORE OUTER WIDTH
Film reel max weight Electronic platform Power requirement Compressed air Machine weight MAIN STANDARD FEATURES
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
Inverted machine with long-dwell sealing head. 3 servo motors to control film/ rollers, jaws head carriage and single belt indexer. User friendly operator interface with intuitive icons on 6” colour VGA touch screen. 64 programs (additional memory on request) Automatic product size change. Integrated temperature control. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Adjustable folding box. Automatic sealing rollers height adjustment. Single film reel mounting with self-centering cones, right hand machine version, 3m long infeed, standard. Robust, hygienic, easy to clean design, stainless steel finishing standard.
All measurements not specified in inches are given in millimeters. These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com
delta
FloBag
delta
www.ilapak.com
Delta
FloBag
TECHNICAL SPECIFICATIONS Up to 60 cycles per minute
Machine speed
Production output depends on film sealability and product characteristics.
Product dimensions LENGTH
Up to 650mm - 25.6” standard 350mm - 14.2; on request: jaws 415mm - 16.3” Up to 180mm - 7.0” standard Up to 160mm - 6.3”, with small product traps Min 150mm - 6” / Max 800mm - 31.5”
WIDTH HEIGHT
Film cut-off
Depending on film and product characteristics.
Wrapping materials Film reel dimensions
Shrink barrier films, laminated, co-extruded and all sealable films
Film reel max weight Electronic platform
76.2mm - 3” standard 152.4mm - 6” on request 350mm - 13.8” standard 800mm - 31.5” standard 1000mm - 39.4” on request Depending on film reel width, up to 75 kg - 165 lbs Industrial PC+ CAN OPEN BUS + ABB servomotor
Power requirement Compressed air Machine weight
From 220 to 480 V, 50/60 Hz, 7kVA 6 bar, 200l/min 1500 Kg - 3300 lbs
CORE O OUTER O WIDTH
MAIN STANDARD FEATURES Long-dwell sealing head to optimize sealing cycle. 5 servo motors to control infeed, main belt, 2 for rollers, jaws, (additional motors with automatic feeders). User friendly 10” colour VGA touch screen operator interface with intuitive icons. 64 programs (additional memory on request). Automatic product size change. Programmable rollers and jaws head height, motorized adjustment. 4 pairs of sealing rollers: C H H C Fix or variable bag length feature. Integrated 02 Analyzer. Film trimming. Independent motor on last pairs of rollers Integrated temperature control. Small product trap, on request. Electronic diagnostic on-board. No product/ no bag. Misplaced product detection system. Ports for peripheral units (printer, labelers, gas control, etc.) Programming via AT compatible keyboard. Single film reel mounting with self-centering cones, right hand machine version, 2m long infeed belt. Robust, hygienic, easy to clean design, stainless steel finishing.
Please discuss your needs with our local representative to configure these machines to your product’s specific requirements. ILAPAK is ISO 9001:2000 certified
All measurements not specified in inches are given in millimeters.
These specifications are not binding. We reserve that right to change them without prior notice.
www.ilapak.com